diff options
Diffstat (limited to 'drivers/media/video')
34 files changed, 296 insertions, 557 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 6d532f170ce5..732bf1e7c326 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -145,7 +145,7 @@ config VIDEO_SAA5246A config VIDEO_SAA5249 tristate "SAA5249 Teletext processor" - depends on VIDEO_DEV && I2C + depends on VIDEO_DEV && I2C && VIDEO_V4L1 help Support for I2C bus based teletext using the SAA5249 chip. At the moment this is only useful on some European WinTV cards. @@ -155,7 +155,7 @@ config VIDEO_SAA5249 config TUNER_3036 tristate "SAB3036 tuner" - depends on VIDEO_DEV && I2C + depends on VIDEO_DEV && I2C && VIDEO_V4L1 help Say Y here to include support for Philips SAB3036 compatible tuners. If in doubt, say N. @@ -449,18 +449,6 @@ source "drivers/media/video/pvrusb2/Kconfig" source "drivers/media/video/em28xx/Kconfig" -config USB_DSBR - tristate "D-Link USB FM radio support (EXPERIMENTAL)" - depends on USB && VIDEO_V4L1 && EXPERIMENTAL - ---help--- - Say Y here if you want to connect this type of radio to your - computer's USB port. Note that the audio is not digital, and - you must connect the line out connector to a sound card or a - set of speakers. - - To compile this driver as a module, choose M here: the - module will be called dsbr100. - source "drivers/media/video/usbvideo/Kconfig" source "drivers/media/video/et61x251/Kconfig" diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 353d61cfac1b..e82e511f2a72 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -77,7 +77,6 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o obj-$(CONFIG_USB_DABUSB) += dabusb.o -obj-$(CONFIG_USB_DSBR) += dsbr100.o obj-$(CONFIG_USB_OV511) += ov511.o obj-$(CONFIG_USB_SE401) += se401.o obj-$(CONFIG_USB_STV680) += stv680.o @@ -91,6 +90,7 @@ obj-$(CONFIG_USB_ZC0301) += zc0301/ obj-$(CONFIG_USB_IBMCAM) += usbvideo/ obj-$(CONFIG_USB_KONICAWC) += usbvideo/ obj-$(CONFIG_USB_VICAM) += usbvideo/ +obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += usbvideo/ obj-$(CONFIG_VIDEO_VIVI) += vivi.o diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig index 153f6a4a96c9..cdcf55650714 100644 --- a/drivers/media/video/bt8xx/Kconfig +++ b/drivers/media/video/bt8xx/Kconfig @@ -1,6 +1,6 @@ config VIDEO_BT848 tristate "BT848 Video For Linux" - depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2 + depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L1 select I2C_ALGOBIT select FW_LOADER select VIDEO_BTCX diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 5764a89d3562..20dff7c316eb 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -3923,7 +3923,12 @@ static int __devinit bttv_register_video(struct bttv *btv) goto err; printk(KERN_INFO "bttv%d: registered device video%d\n", btv->c.nr,btv->video_dev->minor & 0x1f); - video_device_create_file(btv->video_dev, &class_device_attr_card); + if (class_device_create_file(&btv->video_dev->class_dev, + &class_device_attr_card)<0) { + printk(KERN_ERR "bttv%d: class_device_create_file 'card' " + "failed\n", btv->c.nr); + goto err; + } /* vbi */ btv->vbi_dev = vdev_init(btv, &bttv_vbi_template, "vbi"); @@ -4287,6 +4292,8 @@ static struct pci_driver bttv_pci_driver = { static int bttv_init_module(void) { + int ret; + bttv_num = 0; printk(KERN_INFO "bttv: driver version %d.%d.%d loaded\n", @@ -4308,7 +4315,11 @@ static int bttv_init_module(void) bttv_check_chipset(); - bus_register(&bttv_sub_bus_type); + ret = bus_register(&bttv_sub_bus_type); + if (ret < 0) { + printk(KERN_WARNING "bttv: bus_register error: %d\n", ret); + return ret; + } return pci_register_driver(&bttv_pci_driver); } diff --git a/drivers/media/video/bt8xx/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c index 8c9f0f7cf467..63676e7bd635 100644 --- a/drivers/media/video/bt8xx/bttv-vbi.c +++ b/drivers/media/video/bt8xx/bttv-vbi.c @@ -31,11 +31,16 @@ #include <asm/io.h> #include "bttvp.h" -/* Offset from line sync pulse leading edge (0H) in 1 / sampling_rate: - bt8x8 /HRESET pulse starts at 0H and has length 64 / fCLKx1 (E|O_VTC - HSFMT = 0). VBI_HDELAY (always 0) is an offset from the trailing edge - of /HRESET in 1 / fCLKx1, and the sampling_rate tvnorm->Fsc is fCLKx2. */ -#define VBI_OFFSET ((64 + 0) * 2) +/* Offset from line sync pulse leading edge (0H) to start of VBI capture, + in fCLKx2 pixels. According to the datasheet, VBI capture starts + VBI_HDELAY fCLKx1 pixels from the tailing edgeof /HRESET, and /HRESET + is 64 fCLKx1 pixels wide. VBI_HDELAY is set to 0, so this should be + (64 + 0) * 2 = 128 fCLKx2 pixels. But it's not! The datasheet is + Just Plain Wrong. The real value appears to be different for + different revisions of the bt8x8 chips, and to be affected by the + horizontal scaling factor. Experimentally, the value is measured + to be about 244. */ +#define VBI_OFFSET 244 #define VBI_DEFLINES 16 #define VBI_MAXLINES 32 diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c index 353d02b67c33..b69ee1194815 100644 --- a/drivers/media/video/compat_ioctl32.c +++ b/drivers/media/video/compat_ioctl32.c @@ -21,7 +21,7 @@ #ifdef CONFIG_COMPAT - +#ifdef CONFIG_VIDEO_V4L1_COMPAT struct video_tuner32 { compat_int_t tuner; char name[32]; @@ -107,6 +107,7 @@ struct video_window32 { compat_caddr_t clips; compat_int_t clipcount; }; +#endif static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { @@ -124,6 +125,7 @@ static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } +#ifdef CONFIG_VIDEO_V4L1_COMPAT /* You get back everything except the clips... */ static int put_video_window32(struct video_window *kp, struct video_window32 __user *up) { @@ -138,6 +140,7 @@ static int put_video_window32(struct video_window *kp, struct video_window32 __u return -EFAULT; return 0; } +#endif struct v4l2_clip32 { @@ -490,6 +493,24 @@ static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user return 0; } +#ifdef CONFIG_VIDEO_V4L1_COMPAT +struct video_code32 +{ + char loadwhat[16]; /* name or tag of file being passed */ + compat_int_t datasize; + unsigned char *data; +}; + +static inline int microcode32(struct video_code *kp, struct video_code32 __user *up) +{ + if(!access_ok(VERIFY_READ, up, sizeof(struct video_code32)) || + copy_from_user(kp->loadwhat, up->loadwhat, sizeof (up->loadwhat)) || + get_user(kp->datasize, &up->datasize) || + copy_from_user(kp->data, up->data, up->datasize)) + return -EFAULT; + return 0; +} + #define VIDIOCGTUNER32 _IOWR('v',4, struct video_tuner32) #define VIDIOCSTUNER32 _IOW('v',5, struct video_tuner32) #define VIDIOCGWIN32 _IOR('v',9, struct video_window32) @@ -498,6 +519,9 @@ static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user #define VIDIOCSFBUF32 _IOW('v',12, struct video_buffer32) #define VIDIOCGFREQ32 _IOR('v',14, u32) #define VIDIOCSFREQ32 _IOW('v',15, u32) +#define VIDIOCSMICROCODE32 _IOW('v',27, struct video_code32) + +#endif /* VIDIOC_ENUMINPUT32 is VIDIOC_ENUMINPUT minus 4 bytes of padding alignement */ #define VIDIOC_ENUMINPUT32 VIDIOC_ENUMINPUT - _IOC(0, 0, 0, 4) @@ -519,6 +543,7 @@ static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user #define VIDIOC_S_INPUT32 _IOWR ('V', 39, compat_int_t) #define VIDIOC_TRY_FMT32 _IOWR ('V', 64, struct v4l2_format32) +#ifdef CONFIG_VIDEO_V4L1_COMPAT enum { MaxClips = (~0U-sizeof(struct video_window))/sizeof(struct video_clip) }; @@ -583,13 +608,17 @@ static int do_set_window(struct file *file, unsigned int cmd, unsigned long arg) return native_ioctl(file, VIDIOCSWIN, (unsigned long)vw); } +#endif static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { union { +#ifdef CONFIG_VIDEO_V4L1_COMPAT struct video_tuner vt; struct video_buffer vb; struct video_window vw; + struct video_code vc; +#endif struct v4l2_format v2f; struct v4l2_buffer v2b; struct v4l2_framebuffer v2fb; @@ -605,6 +634,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg /* First, convert the command. */ switch(cmd) { +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGTUNER32: cmd = VIDIOCGTUNER; break; case VIDIOCSTUNER32: cmd = VIDIOCSTUNER; break; case VIDIOCGWIN32: cmd = VIDIOCGWIN; break; @@ -612,6 +642,8 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg case VIDIOCSFBUF32: cmd = VIDIOCSFBUF; break; case VIDIOCGFREQ32: cmd = VIDIOCGFREQ; break; case VIDIOCSFREQ32: cmd = VIDIOCSFREQ; break; + case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break; +#endif case VIDIOC_G_FMT32: cmd = VIDIOC_G_FMT; break; case VIDIOC_S_FMT32: cmd = VIDIOC_S_FMT; break; case VIDIOC_QUERYBUF32: cmd = VIDIOC_QUERYBUF; break; @@ -631,6 +663,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg }; switch(cmd) { +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCSTUNER: case VIDIOCGTUNER: err = get_video_tuner32(&karg.vt, up); @@ -644,6 +677,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg break; case VIDIOCSFREQ: +#endif case VIDIOC_S_INPUT: case VIDIOC_OVERLAY: case VIDIOC_STREAMON: @@ -697,14 +731,21 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg compatible_arg = 0; break; +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGWIN: case VIDIOCGFBUF: case VIDIOCGFREQ: +#endif case VIDIOC_G_FBUF: case VIDIOC_G_INPUT: compatible_arg = 0; +#ifdef CONFIG_VIDEO_V4L1_COMPAT + case VIDIOCSMICROCODE: + err = microcode32(&karg.vc, up); + compatible_arg = 0; + break; +#endif }; - if(err) goto out; @@ -719,6 +760,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg } if(err == 0) { switch(cmd) { +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGTUNER: err = put_video_tuner32(&karg.vt, up); break; @@ -730,7 +772,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg case VIDIOCGFBUF: err = put_video_buffer32(&karg.vb, up); break; - +#endif case VIDIOC_G_FBUF: err = put_v4l2_framebuffer32(&karg.v2fb, up); break; @@ -768,7 +810,9 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg err = put_v4l2_input32(&karg.v2i, up); break; +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGFREQ: +#endif case VIDIOC_G_INPUT: err = put_user(((u32)karg.vx), (u32 __user *)up); break; @@ -786,6 +830,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) return ret; switch (cmd) { +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCSWIN32: ret = do_set_window(file, cmd, arg); break; @@ -796,6 +841,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case VIDIOCSFBUF32: case VIDIOCGFREQ32: case VIDIOCSFREQ32: +#endif case VIDIOC_QUERYCAP: case VIDIOC_ENUM_FMT: case VIDIOC_G_FMT32: @@ -827,6 +873,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) ret = do_video_ioctl(file, cmd, arg); break; +#ifdef CONFIG_VIDEO_V4L1_COMPAT /* Little v, the video4linux ioctls (conflict?) */ case VIDIOCGCAP: case VIDIOCGCHAN: @@ -855,6 +902,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case _IOR('v' , BASE_VIDIOCPRIVATE+7, int): ret = native_ioctl(file, cmd, (unsigned long)compat_ptr(arg)); break; +#endif default: v4l_print_ioctl("compat_ioctl32", cmd); } diff --git a/drivers/media/video/cpia2/Kconfig b/drivers/media/video/cpia2/Kconfig index 513cc0927389..e39a96152004 100644 --- a/drivers/media/video/cpia2/Kconfig +++ b/drivers/media/video/cpia2/Kconfig @@ -1,6 +1,6 @@ config VIDEO_CPIA2 tristate "CPiA2 Video For Linux" - depends on VIDEO_DEV && USB + depends on VIDEO_DEV && USB && VIDEO_V4L1 ---help--- This is the video4linux driver for cameras based on Vision's CPiA2 (Colour Processor Interface ASIC), such as the Digital Blue QX5 diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 5c2036b40ea1..7bb7589a07c3 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -104,8 +104,8 @@ u32 cx25840_read4(struct i2c_client * client, u16 addr) if (i2c_master_recv(client, buffer, 4) < 4) return 0; - return (buffer[0] << 24) | (buffer[1] << 16) | - (buffer[2] << 8) | buffer[3]; + return (buffer[3] << 24) | (buffer[2] << 16) | + (buffer[1] << 8) | buffer[0]; } int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask, diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index 72b630a91f41..c25564648993 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -89,7 +89,7 @@ static void cx88_ir_handle_key(struct cx88_IR *ir) auxgpio = cx_read(MO_GP1_IO); /* Take out the parity part */ - gpio+=(gpio & 0x7fd) + (auxgpio & 0xef); + gpio=(gpio & 0x7fd) + (auxgpio & 0xef); } else auxgpio = gpio; diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 2225d4b94140..94c92bacc342 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -1180,7 +1180,6 @@ static int video_do_ioctl(struct inode *inode, struct file *file, V4L2_CAP_READWRITE | V4L2_CAP_STREAMING | V4L2_CAP_VBI_CAPTURE | - V4L2_CAP_VIDEO_OVERLAY | 0; if (UNSET != core->tuner_type) cap->capabilities |= V4L2_CAP_TUNER; @@ -1226,7 +1225,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, struct v4l2_format *f = arg; return cx8800_try_fmt(dev,fh,f); } -#ifdef HAVE_V4L1 +#ifdef CONFIG_VIDEO_V4L1_COMPAT /* --- streaming capture ------------------------------------- */ case VIDIOCGMBUF: { @@ -1585,7 +1584,7 @@ static int radio_do_ioctl(struct inode *inode, struct file *file, *id = 0; return 0; } -#ifdef HAVE_V4L1 +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCSTUNER: { struct video_tuner *v = arg; diff --git a/drivers/media/video/dsbr100.c b/drivers/media/video/dsbr100.c deleted file mode 100644 index f7e33f9ee8e9..000000000000 --- a/drivers/media/video/dsbr100.c +++ /dev/null @@ -1,430 +0,0 @@ -/* A driver for the D-Link DSB-R100 USB radio. The R100 plugs - into both the USB and an analog audio input, so this thing - only deals with initialisation and frequency setting, the - audio data has to be handled by a sound driver. - - Major issue: I can't find out where the device reports the signal - strength, and indeed the windows software appearantly just looks - at the stereo indicator as well. So, scanning will only find - stereo stations. Sad, but I can't help it. - - Also, the windows program sends oodles of messages over to the - device, and I couldn't figure out their meaning. My suspicion - is that they don't have any:-) - - You might find some interesting stuff about this module at - http://unimut.fsk.uni-heidelberg.de/unimut/demi/dsbr - - Copyright (c) 2000 Markus Demleitner <msdemlei@cl.uni-heidelberg.de> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - History: - - Version 0.40: - Markus: Updates for 2.6.x kernels, code layout changes, name sanitizing - - Version 0.30: - Markus: Updates for 2.5.x kernel and more ISO compliant source - - Version 0.25: - PSL and Markus: Cleanup, radio now doesn't stop on device close - - Version 0.24: - Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally - right. Some minor cleanup, improved standalone compilation - - Version 0.23: - Markus: Sign extension bug fixed by declaring transfer_buffer unsigned - - Version 0.22: - Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns, - thanks to Mike Cox for pointing the problem out. - - Version 0.21: - Markus: Minor cleanup, warnings if something goes wrong, lame attempt - to adhere to Documentation/CodingStyle - - Version 0.2: - Brad Hards <bradh@dynamite.com.au>: Fixes to make it work as non-module - Markus: Copyright clarification - - Version 0.01: Markus: initial release - -*/ - - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/input.h> -#include <linux/videodev.h> -#include <media/v4l2-common.h> -#include <linux/usb.h> -#include <linux/smp_lock.h> - -/* - * Version Information - */ -#define DRIVER_VERSION "v0.40" -#define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>" -#define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver" - -#define DSB100_VENDOR 0x04b4 -#define DSB100_PRODUCT 0x1002 - -/* Commands the device appears to understand */ -#define DSB100_TUNE 1 -#define DSB100_ONOFF 2 - -#define TB_LEN 16 - -/* Frequency limits in MHz -- these are European values. For Japanese -devices, that would be 76 and 91. */ -#define FREQ_MIN 87.5 -#define FREQ_MAX 108.0 -#define FREQ_MUL 16000 - - -static int usb_dsbr100_probe(struct usb_interface *intf, - const struct usb_device_id *id); -static void usb_dsbr100_disconnect(struct usb_interface *intf); -static int usb_dsbr100_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); -static int usb_dsbr100_open(struct inode *inode, struct file *file); -static int usb_dsbr100_close(struct inode *inode, struct file *file); - -static int radio_nr = -1; -module_param(radio_nr, int, 0); - -/* Data for one (physical) device */ -typedef struct { - struct usb_device *usbdev; - struct video_device *videodev; - unsigned char transfer_buffer[TB_LEN]; - int curfreq; - int stereo; - int users; - int removed; -} dsbr100_device; - - -/* File system interface */ -static struct file_operations usb_dsbr100_fops = { - .owner = THIS_MODULE, - .open = usb_dsbr100_open, - .release = usb_dsbr100_close, - .ioctl = usb_dsbr100_ioctl, - .compat_ioctl = v4l_compat_ioctl32, - .llseek = no_llseek, -}; - -/* V4L interface */ -static struct video_device dsbr100_videodev_template= -{ - .owner = THIS_MODULE, - .name = "D-Link DSB-R 100", - .type = VID_TYPE_TUNER, - .hardware = VID_HARDWARE_AZTECH, - .fops = &usb_dsbr100_fops, - .release = video_device_release, -}; - -static struct usb_device_id usb_dsbr100_device_table [] = { - { USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) }, - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table); - -/* USB subsystem interface */ -static struct usb_driver usb_dsbr100_driver = { - .name = "dsbr100", - .probe = usb_dsbr100_probe, - .disconnect = usb_dsbr100_disconnect, - .id_table = usb_dsbr100_device_table, -}; - -/* Low-level device interface begins here */ - -/* switch on radio */ -static int dsbr100_start(dsbr100_device *radio) -{ - if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 || - usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - DSB100_ONOFF, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x01, 0x00, radio->transfer_buffer, 8, 300)<0) - return -1; - return (radio->transfer_buffer)[0]; -} - - -/* switch off radio */ -static int dsbr100_stop(dsbr100_device *radio) -{ - if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 || - usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - DSB100_ONOFF, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0x00, radio->transfer_buffer, 8, 300)<0) - return -1; - return (radio->transfer_buffer)[0]; -} - -/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */ -static int dsbr100_setfreq(dsbr100_device *radio, int freq) -{ - freq = (freq/16*80)/1000+856; - if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - DSB100_TUNE, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - (freq>>8)&0x00ff, freq&0xff, - radio->transfer_buffer, 8, 300)<0 || - usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 || - usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0x24, radio->transfer_buffer, 8, 300)<0) { - radio->stereo = -1; - return -1; - } - radio->stereo = ! ((radio->transfer_buffer)[0]&0x01); - return (radio->transfer_buffer)[0]; -} - -/* return the device status. This is, in effect, just whether it -sees a stereo signal or not. Pity. */ -static void dsbr100_getstat(dsbr100_device *radio) -{ - if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00 , 0x24, radio->transfer_buffer, 8, 300)<0) - radio->stereo = -1; - else - radio->stereo = ! (radio->transfer_buffer[0]&0x01); -} - - -/* USB subsystem interface begins here */ - -/* check if the device is present and register with v4l and -usb if it is */ -static int usb_dsbr100_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - dsbr100_device *radio; - - if (!(radio = kmalloc(sizeof(dsbr100_device), GFP_KERNEL))) - return -ENOMEM; - if (!(radio->videodev = video_device_alloc())) { - kfree(radio); - return -ENOMEM; - } - memcpy(radio->videodev, &dsbr100_videodev_template, - sizeof(dsbr100_videodev_template)); - radio->removed = 0; - radio->users = 0; - radio->usbdev = interface_to_usbdev(intf); - radio->curfreq = FREQ_MIN*FREQ_MUL; - video_set_drvdata(radio->videodev, radio); - if (video_register_device(radio->videodev, VFL_TYPE_RADIO, - radio_nr)) { - warn("Could not register video device"); - video_device_release(radio->videodev); - kfree(radio); - return -EIO; - } - usb_set_intfdata(intf, radio); - return 0; -} - -/* handle unplugging of the device, release data structures -if nothing keeps us from doing it. If something is still -keeping us busy, the release callback of v4l will take care -of releasing it. stv680.c does not relase its private -data, so I don't do this here either. Checking out the -code I'd expect I better did that, but if there's a memory -leak here it's tiny (~50 bytes per disconnect) */ -static void usb_dsbr100_disconnect(struct usb_interface *intf) -{ - dsbr100_device *radio = usb_get_intfdata(intf); - - usb_set_intfdata (intf, NULL); - if (radio) { - video_unregister_device(radio->videodev); - radio->videodev = NULL; - if (radio->users) { - kfree(radio); - } else { - radio->removed = 1; - } - } -} - - -/* Video for Linux interface */ - -static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, void *arg) -{ - dsbr100_device *radio=video_get_drvdata(video_devdata(file)); - - if (!radio) - return -EIO; - - switch(cmd) { - case VIDIOCGCAP: { - struct video_capability *v = arg; - - memset(v, 0, sizeof(*v)); - v->type = VID_TYPE_TUNER; - v->channels = 1; - v->audios = 1; - strcpy(v->name, "D-Link R-100 USB FM Radio"); - return 0; - } - case VIDIOCGTUNER: { - struct video_tuner *v = arg; - - dsbr100_getstat(radio); - if(v->tuner) /* Only 1 tuner */ - return -EINVAL; - v->rangelow = FREQ_MIN*FREQ_MUL; - v->rangehigh = FREQ_MAX*FREQ_MUL; - v->flags = VIDEO_TUNER_LOW; - v->mode = VIDEO_MODE_AUTO; - v->signal = radio->stereo*0x7000; - /* Don't know how to get signal strength */ - v->flags |= VIDEO_TUNER_STEREO_ON*radio->stereo; - strcpy(v->name, "DSB R-100"); - return 0; - } - case VIDIOCSTUNER: { - struct video_tuner *v = arg; - - if(v->tuner!=0) - return -EINVAL; - /* Only 1 tuner so no setting needed ! */ - return 0; - } - case VIDIOCGFREQ: { - int *freq = arg; - - if (radio->curfreq==-1) - return -EINVAL; - *freq = radio->curfreq; - return 0; - } - case VIDIOCSFREQ: { - int *freq = arg; - - radio->curfreq = *freq; - if (dsbr100_setfreq(radio, radio->curfreq)==-1) - warn("Set frequency failed"); - return 0; - } - case VIDIOCGAUDIO: { - struct video_audio *v = arg; - - memset(v, 0, sizeof(*v)); - v->flags |= VIDEO_AUDIO_MUTABLE; - v->mode = VIDEO_SOUND_STEREO; - v->volume = 1; - v->step = 1; - strcpy(v->name, "Radio"); - return 0; - } - case VIDIOCSAUDIO: { - struct video_audio *v = arg; - - if (v->audio) - return -EINVAL; - if (v->flags&VIDEO_AUDIO_MUTE) { - if (dsbr100_stop(radio)==-1) - warn("Radio did not respond properly"); - } - else - if (dsbr100_start(radio)==-1) - warn("Radio did not respond properly"); - return 0; - } - default: - return -ENOIOCTLCMD; - } -} - -static int usb_dsbr100_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl); -} - -static int usb_dsbr100_open(struct inode *inode, struct file *file) -{ - dsbr100_device *radio=video_get_drvdata(video_devdata(file)); - - radio->users = 1; - if (dsbr100_start(radio)<0) { - warn("Radio did not start up properly"); - radio->users = 0; - return -EIO; - } - dsbr100_setfreq(radio, radio->curfreq); - return 0; -} - -static int usb_dsbr100_close(struct inode *inode, struct file *file) -{ - dsbr100_device *radio=video_get_drvdata(video_devdata(file)); - - if (!radio) - return -ENODEV; - radio->users = 0; - if (radio->removed) { - kfree(radio); - } - return 0; -} - -static int __init dsbr100_init(void) -{ - int retval = usb_register(&usb_dsbr100_driver); - info(DRIVER_VERSION ":" DRIVER_DESC); - return retval; -} - -static void __exit dsbr100_exit(void) -{ - usb_deregister(&usb_dsbr100_driver); -} - -module_init (dsbr100_init); -module_exit (dsbr100_exit); - -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index dbb75a7db199..56246b8578f3 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -362,7 +362,7 @@ int msp_sleep(struct msp_state *state, int timeout) } /* ------------------------------------------------------------------------ */ - +#ifdef CONFIG_VIDEO_V4L1 static int msp_mode_v4l2_to_v4l1(int rxsubchans, int audmode) { if (rxsubchans == V4L2_TUNER_SUB_MONO) @@ -384,6 +384,7 @@ static int msp_mode_v4l1_to_v4l2(int mode) return V4L2_TUNER_MODE_LANG1; return V4L2_TUNER_MODE_MONO; } +#endif static int msp_get_ctrl(struct i2c_client *client, struct v4l2_control *ctrl) { @@ -509,6 +510,7 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) /* --- v4l ioctls --- */ /* take care: bttv does userspace copying, we'll get a kernel pointer here... */ +#ifdef CONFIG_VIDEO_V4L1 case VIDIOCGAUDIO: { struct video_audio *va = arg; @@ -577,6 +579,12 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) } case VIDIOCSFREQ: + { + /* new channel -- kick audio carrier scan */ + msp_wake_thread(client); + break; + } +#endif case VIDIOC_S_FREQUENCY: { /* new channel -- kick audio carrier scan */ diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c index f2fd9195b3ac..ed02ff811388 100644 --- a/drivers/media/video/msp3400-kthreads.c +++ b/drivers/media/video/msp3400-kthreads.c @@ -961,10 +961,10 @@ int msp34xxg_thread(void *data) /* setup the chip*/ msp34xxg_reset(client); state->std = state->radio ? 0x40 : msp_standard; - if (state->std != 1) - goto unmute; /* start autodetect */ msp_write_dem(client, 0x20, state->std); + if (state->std != 1) + goto unmute; /* watch autodetect */ v4l_dbg(1, msp_debug, client, "started autodetect, waiting for result\n"); diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 9b48abcf6089..be1e5cc78081 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -852,7 +852,6 @@ unsigned long pvr2_hdw_get_sn(struct pvr2_hdw *hdw) return hdw->serial_number; } - int pvr2_hdw_get_unit_number(struct pvr2_hdw *hdw) { return hdw->unit_number; @@ -2318,7 +2317,6 @@ void pvr2_hdw_poll_trigger_unlocked(struct pvr2_hdw *hdw) } } - /* Return name for this driver instance */ const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *hdw) { @@ -2542,6 +2540,10 @@ static void pvr2_ctl_timeout(unsigned long data) } +/* Issue a command and get a response from the device. This extended + version includes a probe flag (which if set means that device errors + should not be logged or treated as fatal) and a timeout in jiffies. + This can be used to non-lethally probe the health of endpoint 1. */ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, unsigned int timeout,int probe_fl, void *write_data,unsigned int write_len, @@ -2970,6 +2972,7 @@ int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw) } +/* Stop / start video stream transport */ static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl) { int status; @@ -3068,6 +3071,7 @@ int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val) } +/* Find I2C address of eeprom */ static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw) { int result; diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.c b/drivers/media/video/pvrusb2/pvrusb2-io.c index 681f79c8064e..1e393762546c 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-io.c +++ b/drivers/media/video/pvrusb2/pvrusb2-io.c @@ -26,6 +26,8 @@ #include <linux/slab.h> #include <linux/mutex.h> +static const char *pvr2_buffer_state_decode(enum pvr2_buffer_state); + #define BUFFER_SIG 0x47653271 // #define SANITY_CHECK_BUFFERS @@ -515,6 +517,10 @@ void pvr2_stream_set_callback(struct pvr2_stream *sp, } /* Query / set the nominal buffer count */ +int pvr2_stream_get_buffer_count(struct pvr2_stream *sp) +{ + return sp->buffer_target_count; +} int pvr2_stream_set_buffer_count(struct pvr2_stream *sp,unsigned int cnt) { @@ -553,7 +559,6 @@ int pvr2_stream_get_ready_count(struct pvr2_stream *sp) return sp->r_count; } - void pvr2_stream_kill(struct pvr2_stream *sp) { struct pvr2_buffer *bp; @@ -607,7 +612,6 @@ int pvr2_buffer_queue(struct pvr2_buffer *bp) return ret; } - int pvr2_buffer_set_buffer(struct pvr2_buffer *bp,void *ptr,unsigned int cnt) { int ret = 0; @@ -646,7 +650,6 @@ int pvr2_buffer_get_status(struct pvr2_buffer *bp) return bp->status; } - int pvr2_buffer_get_id(struct pvr2_buffer *bp) { return bp->id; diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.h b/drivers/media/video/pvrusb2/pvrusb2-io.h index 96285ad234a6..93279cc2a35e 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-io.h +++ b/drivers/media/video/pvrusb2/pvrusb2-io.h @@ -47,6 +47,7 @@ void pvr2_stream_set_callback(struct pvr2_stream *, void *data); /* Query / set the nominal buffer count */ +int pvr2_stream_get_buffer_count(struct pvr2_stream *); int pvr2_stream_set_buffer_count(struct pvr2_stream *,unsigned int); /* Get a pointer to a buffer that is either idle, ready, or is specified @@ -58,6 +59,7 @@ struct pvr2_buffer *pvr2_stream_get_buffer(struct pvr2_stream *sp,int id); /* Find out how many buffers are idle or ready */ int pvr2_stream_get_ready_count(struct pvr2_stream *); + /* Kill all pending buffers and throw away any ready buffers as well */ void pvr2_stream_kill(struct pvr2_stream *); diff --git a/drivers/media/video/pvrusb2/pvrusb2-ioread.c b/drivers/media/video/pvrusb2/pvrusb2-ioread.c index f7a2e225a002..b71f9a961f8a 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-ioread.c +++ b/drivers/media/video/pvrusb2/pvrusb2-ioread.c @@ -213,7 +213,9 @@ int pvr2_ioread_setup(struct pvr2_ioread *cp,struct pvr2_stream *sp) " pvr2_ioread_setup (tear-down) id=%p",cp); pvr2_ioread_stop(cp); pvr2_stream_kill(cp->stream); - pvr2_stream_set_buffer_count(cp->stream,0); + if (pvr2_stream_get_buffer_count(cp->stream)) { + pvr2_stream_set_buffer_count(cp->stream,0); + } cp->stream = NULL; } if (sp) { @@ -251,7 +253,6 @@ int pvr2_ioread_set_enabled(struct pvr2_ioread *cp,int fl) return ret; } - static int pvr2_ioread_get_buffer(struct pvr2_ioread *cp) { int stat; diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c index 6af55a8b6f05..d1dda5caf406 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c +++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c @@ -44,12 +44,16 @@ struct pvr2_sysfs { struct kobj_type ktype; struct class_device_attribute attr_v4l_minor_number; struct class_device_attribute attr_unit_number; + int v4l_minor_number_created_ok; + int unit_number_created_ok; }; #ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC struct pvr2_sysfs_debugifc { struct class_device_attribute attr_debugcmd; struct class_device_attribute attr_debuginfo; + int debugcmd_created_ok; + int debuginfo_created_ok; }; #endif /* CONFIG_VIDEO_PVRUSB2_DEBUGIFC */ @@ -67,6 +71,7 @@ struct pvr2_sysfs_ctl_item { struct pvr2_sysfs_ctl_item *item_next; struct attribute *attr_gen[7]; struct attribute_group grp; + int created_ok; char name[80]; }; @@ -487,6 +492,7 @@ static void pvr2_sysfs_add_control(struct pvr2_sysfs *sfp,int ctl_id) struct pvr2_sysfs_func_set *fp; struct pvr2_ctrl *cptr; unsigned int cnt,acnt; + int ret; if ((ctl_id < 0) || (ctl_id >= (sizeof(funcs)/sizeof(funcs[0])))) { return; @@ -589,7 +595,13 @@ static void pvr2_sysfs_add_control(struct pvr2_sysfs *sfp,int ctl_id) cip->grp.name = cip->name; cip->grp.attrs = cip->attr_gen; - sysfs_create_group(&sfp->class_dev->kobj,&cip->grp); + ret = sysfs_create_group(&sfp->class_dev->kobj,&cip->grp); + if (ret) { + printk(KERN_WARNING "%s: sysfs_create_group error: %d\n", + __FUNCTION__, ret); + return; + } + cip->created_ok = !0; } #ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC @@ -600,6 +612,8 @@ static ssize_t debugcmd_store(struct class_device *,const char *,size_t count); static void pvr2_sysfs_add_debugifc(struct pvr2_sysfs *sfp) { struct pvr2_sysfs_debugifc *dip; + int ret; + dip = kmalloc(sizeof(*dip),GFP_KERNEL); if (!dip) return; memset(dip,0,sizeof(*dip)); @@ -613,17 +627,34 @@ static void pvr2_sysfs_add_debugifc(struct pvr2_sysfs *sfp) dip->attr_debuginfo.attr.mode = S_IRUGO; dip->attr_debuginfo.show = debuginfo_show; sfp->debugifc = dip; - class_device_create_file(sfp->class_dev,&dip->attr_debugcmd); - class_device_create_file(sfp->class_dev,&dip->attr_debuginfo); + ret = class_device_create_file(sfp->class_dev,&dip->attr_debugcmd); + if (ret < 0) { + printk(KERN_WARNING "%s: class_device_create_file error: %d\n", + __FUNCTION__, ret); + } else { + dip->debugcmd_created_ok = !0; + } + ret = class_device_create_file(sfp->class_dev,&dip->attr_debuginfo); + if (ret < 0) { + printk(KERN_WARNING "%s: class_device_create_file error: %d\n", + __FUNCTION__, ret); + } else { + dip->debuginfo_created_ok = !0; + } } static void pvr2_sysfs_tear_down_debugifc(struct pvr2_sysfs *sfp) { if (!sfp->debugifc) return; - class_device_remove_file(sfp->class_dev, - &sfp->debugifc->attr_debuginfo); - class_device_remove_file(sfp->class_dev,&sfp->debugifc->attr_debugcmd); + if (sfp->debugifc->debuginfo_created_ok) { + class_device_remove_file(sfp->class_dev, + &sfp->debugifc->attr_debuginfo); + } + if (sfp->debugifc->debugcmd_created_ok) { + class_device_remove_file(sfp->class_dev, + &sfp->debugifc->attr_debugcmd); + } kfree(sfp->debugifc); sfp->debugifc = NULL; } @@ -645,7 +676,9 @@ static void pvr2_sysfs_tear_down_controls(struct pvr2_sysfs *sfp) struct pvr2_sysfs_ctl_item *cip1,*cip2; for (cip1 = sfp->item_first; cip1; cip1 = cip2) { cip2 = cip1->item_next; - sysfs_remove_group(&sfp->class_dev->kobj,&cip1->grp); + if (cip1->created_ok) { + sysfs_remove_group(&sfp->class_dev->kobj,&cip1->grp); + } pvr2_sysfs_trace("Destroying pvr2_sysfs_ctl_item id=%p",cip1); kfree(cip1); } @@ -675,8 +708,14 @@ static void class_dev_destroy(struct pvr2_sysfs *sfp) pvr2_sysfs_tear_down_debugifc(sfp); #endif /* CONFIG_VIDEO_PVRUSB2_DEBUGIFC */ pvr2_sysfs_tear_down_controls(sfp); - class_device_remove_file(sfp->class_dev,&sfp->attr_v4l_minor_number); - class_device_remove_file(sfp->class_dev,&sfp->attr_unit_number); + if (sfp->v4l_minor_number_created_ok) { + class_device_remove_file(sfp->class_dev, + &sfp->attr_v4l_minor_number); + } + if (sfp->unit_number_created_ok) { + class_device_remove_file(sfp->class_dev, + &sfp->attr_unit_number); + } pvr2_sysfs_trace("Destroying class_dev id=%p",sfp->class_dev); sfp->class_dev->class_data = NULL; class_device_unregister(sfp->class_dev); @@ -709,6 +748,8 @@ static void class_dev_create(struct pvr2_sysfs *sfp, { struct usb_device *usb_dev; struct class_device *class_dev; + int ret; + usb_dev = pvr2_hdw_get_dev(sfp->channel.hdw); if (!usb_dev) return; class_dev = kmalloc(sizeof(*class_dev),GFP_KERNEL); @@ -733,20 +774,40 @@ static void class_dev_create(struct pvr2_sysfs *sfp, sfp->class_dev = class_dev; class_dev->class_data = sfp; - class_device_register(class_dev); + ret = class_device_register(class_dev); + if (ret) { + printk(KERN_ERR "%s: class_device_register failed\n", + __FUNCTION__); + kfree(class_dev); + return; + } sfp->attr_v4l_minor_number.attr.owner = THIS_MODULE; sfp->attr_v4l_minor_number.attr.name = "v4l_minor_number"; sfp->attr_v4l_minor_number.attr.mode = S_IRUGO; sfp->attr_v4l_minor_number.show = v4l_minor_number_show; sfp->attr_v4l_minor_number.store = NULL; - class_device_create_file(sfp->class_dev,&sfp->attr_v4l_minor_number); + ret = class_device_create_file(sfp->class_dev, + &sfp->attr_v4l_minor_number); + if (ret < 0) { + printk(KERN_WARNING "%s: class_device_create_file error: %d\n", + __FUNCTION__, ret); + } else { + sfp->v4l_minor_number_created_ok = !0; + } + sfp->attr_unit_number.attr.owner = THIS_MODULE; sfp->attr_unit_number.attr.name = "unit_number"; sfp->attr_unit_number.attr.mode = S_IRUGO; sfp->attr_unit_number.show = unit_number_show; sfp->attr_unit_number.store = NULL; - class_device_create_file(sfp->class_dev,&sfp->attr_unit_number); + ret = class_device_create_file(sfp->class_dev,&sfp->attr_unit_number); + if (ret < 0) { + printk(KERN_WARNING "%s: class_device_create_file error: %d\n", + __FUNCTION__, ret); + } else { + sfp->unit_number_created_ok = !0; + } pvr2_sysfs_add_controls(sfp); #ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig index 697145e0bf15..8fdf7101d3bf 100644 --- a/drivers/media/video/pwc/Kconfig +++ b/drivers/media/video/pwc/Kconfig @@ -30,7 +30,7 @@ config USB_PWC config USB_PWC_DEBUG bool "USB Philips Cameras verbose debug" - depends USB_PWC + depends on USB_PWC help Say Y here in order to have the pwc driver generate verbose debugging messages. diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 47d0d83a0264..d4703944df9c 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -160,6 +160,7 @@ static struct file_operations pwc_fops = { .poll = pwc_video_poll, .mmap = pwc_video_mmap, .ioctl = pwc_video_ioctl, + .compat_ioctl = v4l_compat_ioctl32, .llseek = no_llseek, }; static struct video_device pwc_template = { diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index f1fd69e7f119..d73cff1970ae 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -997,9 +997,9 @@ static int saa7134_alsa_init(void) struct saa7134_dev *dev = NULL; struct list_head *list; - if (!dmasound_init && !dmasound_exit) { - dmasound_init = alsa_device_init; - dmasound_exit = alsa_device_exit; + if (!saa7134_dmasound_init && !saa7134_dmasound_exit) { + saa7134_dmasound_init = alsa_device_init; + saa7134_dmasound_exit = alsa_device_exit; } else { printk(KERN_WARNING "saa7134 ALSA: can't load, DMA sound handler already assigned (probably to OSS)\n"); return -EBUSY; @@ -1036,8 +1036,8 @@ static void saa7134_alsa_exit(void) snd_card_free(snd_saa7134_cards[idx]); } - dmasound_init = NULL; - dmasound_exit = NULL; + saa7134_dmasound_init = NULL; + saa7134_dmasound_exit = NULL; printk(KERN_INFO "saa7134 ALSA driver for DMA sound unloaded\n"); return; diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 6e97cc84ba89..be3a81fc90a2 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -95,8 +95,8 @@ LIST_HEAD(saa7134_devlist); static LIST_HEAD(mops_list); static unsigned int saa7134_devcount; -int (*dmasound_init)(struct saa7134_dev *dev); -int (*dmasound_exit)(struct saa7134_dev *dev); +int (*saa7134_dmasound_init)(struct saa7134_dev *dev); +int (*saa7134_dmasound_exit)(struct saa7134_dev *dev); #define dprintk(fmt, arg...) if (core_debug) \ printk(KERN_DEBUG "%s/core: " fmt, dev->name , ## arg) @@ -1008,8 +1008,8 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, /* check for signal */ saa7134_irq_video_intl(dev); - if (dmasound_init && !dev->dmasound.priv_data) { - dmasound_init(dev); + if (saa7134_dmasound_init && !dev->dmasound.priv_data) { + saa7134_dmasound_init(dev); } return 0; @@ -1036,8 +1036,8 @@ static void __devexit saa7134_finidev(struct pci_dev *pci_dev) struct saa7134_mpeg_ops *mops; /* Release DMA sound modules if present */ - if (dmasound_exit && dev->dmasound.priv_data) { - dmasound_exit(dev); + if (saa7134_dmasound_exit && dev->dmasound.priv_data) { + saa7134_dmasound_exit(dev); } /* debugging ... */ @@ -1169,8 +1169,8 @@ EXPORT_SYMBOL(saa7134_boards); /* ----------------- for the DMA sound modules --------------- */ -EXPORT_SYMBOL(dmasound_init); -EXPORT_SYMBOL(dmasound_exit); +EXPORT_SYMBOL(saa7134_dmasound_init); +EXPORT_SYMBOL(saa7134_dmasound_exit); EXPORT_SYMBOL(saa7134_pgtable_free); EXPORT_SYMBOL(saa7134_pgtable_build); EXPORT_SYMBOL(saa7134_pgtable_alloc); diff --git a/drivers/media/video/saa7134/saa7134-oss.c b/drivers/media/video/saa7134/saa7134-oss.c index 3895d05804ae..2e3ba5f31453 100644 --- a/drivers/media/video/saa7134/saa7134-oss.c +++ b/drivers/media/video/saa7134/saa7134-oss.c @@ -993,9 +993,9 @@ static int saa7134_oss_init(void) struct saa7134_dev *dev = NULL; struct list_head *list; - if (!dmasound_init && !dmasound_exit) { - dmasound_init = oss_device_init; - dmasound_exit = oss_device_exit; + if (!saa7134_dmasound_init && !saa7134_dmasound_exit) { + saa7134_dmasound_init = oss_device_init; + saa7134_dmasound_exit = oss_device_exit; } else { printk(KERN_WARNING "saa7134 OSS: can't load, DMA sound handler already assigned (probably to ALSA)\n"); return -EBUSY; @@ -1037,8 +1037,8 @@ static void saa7134_oss_exit(void) } - dmasound_init = NULL; - dmasound_exit = NULL; + saa7134_dmasound_init = NULL; + saa7134_dmasound_exit = NULL; printk(KERN_INFO "saa7134 OSS driver for DMA sound unloaded\n"); diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index e4156ec9c6d7..2c171af9a9f2 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -40,7 +40,7 @@ static unsigned int video_debug = 0; static unsigned int gbuffers = 8; -static unsigned int noninterlaced = 0; +static unsigned int noninterlaced = 1; static unsigned int gbufsize = 720*576*4; static unsigned int gbufsize_max = 720*576*4; module_param(video_debug, int, 0644); @@ -48,7 +48,7 @@ MODULE_PARM_DESC(video_debug,"enable debug messages [video]"); module_param(gbuffers, int, 0444); MODULE_PARM_DESC(gbuffers,"number of capture buffers, range 2-32"); module_param(noninterlaced, int, 0644); -MODULE_PARM_DESC(noninterlaced,"video input is noninterlaced"); +MODULE_PARM_DESC(noninterlaced,"capture non interlaced video"); #define dprintk(fmt, arg...) if (video_debug) \ printk(KERN_DEBUG "%s/video: " fmt, dev->name , ## arg) @@ -2087,7 +2087,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, struct v4l2_format *f = arg; return saa7134_try_fmt(dev,fh,f); } -#ifdef HAVE_V4L1 +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGMBUF: { struct video_mbuf *mbuf = arg; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index d5ee99c574cc..c04ce6152fd5 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -586,8 +586,8 @@ void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf); int saa7134_set_dmabits(struct saa7134_dev *dev); -extern int (*dmasound_init)(struct saa7134_dev *dev); -extern int (*dmasound_exit)(struct saa7134_dev *dev); +extern int (*saa7134_dmasound_init)(struct saa7134_dev *dev); +extern int (*saa7134_dmasound_exit)(struct saa7134_dev *dev); /* ----------------------------------------------------------- */ diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c index b36ba9fa3a28..5686547ba76a 100644 --- a/drivers/media/video/stradis.c +++ b/drivers/media/video/stradis.c @@ -2181,7 +2181,6 @@ static struct pci_device_id stradis_pci_tbl[] = { { 0 } }; -MODULE_DEVICE_TABLE(pci, stradis_pci_tbl); static struct pci_driver stradis_driver = { .name = "stradis", diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index f7eb402d5f2b..40590bae5ff7 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -196,14 +196,6 @@ static void set_type(struct i2c_client *c, unsigned int type, i2c_master_send(c, buffer, 4); default_tuner_init(c); break; - case TUNER_LG_TDVS_H06XF: - /* Set the Auxiliary Byte. */ - buffer[2] &= ~0x20; - buffer[2] |= 0x18; - buffer[3] = 0x20; - i2c_master_send(c, buffer, 4); - default_tuner_init(c); - break; case TUNER_PHILIPS_TD1316: buffer[0] = 0x0b; buffer[1] = 0xdc; @@ -598,6 +590,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (t->standby) t->standby (client); break; +#ifdef CONFIG_VIDEO_V4L1 case VIDIOCSAUDIO: if (check_mode(t, "VIDIOCSAUDIO") == EINVAL) return 0; @@ -607,17 +600,6 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) /* Should be implemented, since bttv calls it */ tuner_dbg("VIDIOCSAUDIO not implemented.\n"); break; - case TDA9887_SET_CONFIG: - if (t->type == TUNER_TDA9887) { - int *i = arg; - - t->tda9887_config = *i; - set_freq(client, t->tv_freq); - } - break; - /* --- v4l ioctls --- */ - /* take care: bttv does userspace copying, we'll get a - kernel pointer here... */ case VIDIOCSCHAN: { static const v4l2_std_id map[] = { @@ -701,7 +683,18 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO; return 0; } +#endif + case TDA9887_SET_CONFIG: + if (t->type == TUNER_TDA9887) { + int *i = arg; + t->tda9887_config = *i; + set_freq(client, t->tv_freq); + } + break; + /* --- v4l ioctls --- */ + /* take care: bttv does userspace copying, we'll get a + kernel pointer here... */ case VIDIOC_S_STD: { v4l2_std_id *id = arg; diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c index d071c5cbf013..abe37cf632c6 100644 --- a/drivers/media/video/tuner-simple.c +++ b/drivers/media/video/tuner-simple.c @@ -339,7 +339,20 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) if (4 != (rc = i2c_master_send(c,buffer,4))) tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); - if (t->type == TUNER_MICROTUNE_4042FI5) { + switch (t->type) { + case TUNER_LG_TDVS_H06XF: + /* Set the Auxiliary Byte. */ + buffer[0] = buffer[2]; + buffer[0] &= ~0x20; + buffer[0] |= 0x18; + buffer[1] = 0x20; + tuner_dbg("tv 0x%02x 0x%02x\n",buffer[0],buffer[1]); + + if (2 != (rc = i2c_master_send(c,buffer,2))) + tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); + break; + case TUNER_MICROTUNE_4042FI5: + { // FIXME - this may also work for other tuners unsigned long timeout = jiffies + msecs_to_jiffies(1); u8 status_byte = 0; @@ -364,10 +377,12 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) buffer[2] = config; buffer[3] = cb; tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", - buffer[0],buffer[1],buffer[2],buffer[3]); + buffer[0],buffer[1],buffer[2],buffer[3]); if (4 != (rc = i2c_master_send(c,buffer,4))) tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); + break; + } } } diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c index a167e17c6dcd..d7eadc2c298d 100644 --- a/drivers/media/video/tuner-types.c +++ b/drivers/media/video/tuner-types.c @@ -1027,10 +1027,11 @@ static struct tuner_params tuner_tnf_5335mf_params[] = { /* 70-79 */ /* ------------ TUNER_SAMSUNG_TCPN_2121P30A - Samsung NTSC ------------ */ +/* '+ 4' turns on the Low Noise Amplifier */ static struct tuner_range tuner_samsung_tcpn_2121p30a_ntsc_ranges[] = { - { 16 * 130.00 /*MHz*/, 0xce, 0x01, }, - { 16 * 364.50 /*MHz*/, 0xce, 0x02, }, - { 16 * 999.99 , 0xce, 0x08, }, + { 16 * 130.00 /*MHz*/, 0xce, 0x01 + 4, }, + { 16 * 364.50 /*MHz*/, 0xce, 0x02 + 4, }, + { 16 * 999.99 , 0xce, 0x08 + 4, }, }; static struct tuner_params tuner_samsung_tcpn_2121p30a_params[] = { @@ -1060,10 +1061,11 @@ static struct tuner_params tuner_thomson_fe6600_params[] = { /* ------------ TUNER_SAMSUNG_TCPG_6121P30A - Samsung PAL ------------ */ +/* '+ 4' turns on the Low Noise Amplifier */ static struct tuner_range tuner_samsung_tcpg_6121p30a_pal_ranges[] = { - { 16 * 146.25 /*MHz*/, 0xce, 0x01, }, - { 16 * 428.50 /*MHz*/, 0xce, 0x02, }, - { 16 * 999.99 , 0xce, 0x08, }, + { 16 * 146.25 /*MHz*/, 0xce, 0x01 + 4, }, + { 16 * 428.50 /*MHz*/, 0xce, 0x02 + 4, }, + { 16 * 999.99 , 0xce, 0x08 + 4, }, }; static struct tuner_params tuner_samsung_tcpg_6121p30a_params[] = { diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig index 59fb899f31f3..a0fd82b924f2 100644 --- a/drivers/media/video/usbvideo/Kconfig +++ b/drivers/media/video/usbvideo/Kconfig @@ -3,7 +3,7 @@ config VIDEO_USBVIDEO config USB_VICAM tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)" - depends on USB && VIDEO_V4L1 && EXPERIMENTAL + depends on USB && VIDEO_DEV && VIDEO_V4L1 && EXPERIMENTAL select VIDEO_USBVIDEO ---help--- Say Y here if you have 3com homeconnect camera (vicam). @@ -13,7 +13,7 @@ config USB_VICAM config USB_IBMCAM tristate "USB IBM (Xirlink) C-it Camera support" - depends on USB && VIDEO_V4L1 + depends on USB && VIDEO_DEV && VIDEO_V4L1 select VIDEO_USBVIDEO ---help--- Say Y here if you want to connect a IBM "C-It" camera, also known as @@ -28,7 +28,7 @@ config USB_IBMCAM config USB_KONICAWC tristate "USB Konica Webcam support" - depends on USB && VIDEO_V4L1 + depends on USB && VIDEO_DEV && VIDEO_V4L1 select VIDEO_USBVIDEO ---help--- Say Y here if you want support for webcams based on a Konica @@ -39,7 +39,7 @@ config USB_KONICAWC config USB_QUICKCAM_MESSENGER tristate "USB Logitech Quickcam Messenger" - depends on USB && VIDEO_DEV + depends on USB && VIDEO_DEV && VIDEO_V4L1 select VIDEO_USBVIDEO ---help--- Say Y or M here to enable support for the USB Logitech Quickcam diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c index d83a2c84d233..d7c3fcbc80f7 100644 --- a/drivers/media/video/v4l1-compat.c +++ b/drivers/media/video/v4l1-compat.c @@ -599,6 +599,10 @@ v4l_compat_translate_ioctl(struct inode *inode, dprintk("VIDIOCGPICT / VIDIOC_G_FMT: %d\n",err); break; } + + pict->depth = ((fmt2->fmt.pix.bytesperline<<3) + + (fmt2->fmt.pix.width-1) ) + /fmt2->fmt.pix.width; pict->palette = pixelformat_to_palette( fmt2->fmt.pix.pixelformat); break; diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index f06dc19e504a..8d972ffdaf98 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -202,7 +202,7 @@ static char *v4l2_memory_names[] = { /* ------------------------------------------------------------------ */ /* debug help functions */ -#ifdef HAVE_V4L1 +#ifdef CONFIG_VIDEO_V4L1_COMPAT static const char *v4l1_ioctls[] = { [_IOC_NR(VIDIOCGCAP)] = "VIDIOCGCAP", [_IOC_NR(VIDIOCGCHAN)] = "VIDIOCGCHAN", @@ -301,7 +301,7 @@ static const char *v4l2_ioctls[] = { #define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls) static const char *v4l2_int_ioctls[] = { -#ifdef HAVE_VIDEO_DECODER +#ifdef CONFIG_VIDEO_V4L1_COMPAT [_IOC_NR(DECODER_GET_CAPABILITIES)] = "DECODER_GET_CAPABILITIES", [_IOC_NR(DECODER_GET_STATUS)] = "DECODER_GET_STATUS", [_IOC_NR(DECODER_SET_NORM)] = "DECODER_SET_NORM", @@ -367,7 +367,7 @@ void v4l_printk_ioctl(unsigned int cmd) (_IOC_NR(cmd) < V4L2_INT_IOCTLS) ? v4l2_int_ioctls[_IOC_NR(cmd)] : "UNKNOWN", dir, cmd); break; -#ifdef HAVE_V4L1 +#ifdef CONFIG_VIDEO_V4L1_COMPAT case 'v': printk("v4l1 ioctl %s, dir=%s (0x%08x)\n", (_IOC_NR(cmd) < V4L1_IOCTLS) ? @@ -414,6 +414,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) printk ("%s: tuner type=%d\n", s, *p); break; } +#ifdef CONFIG_VIDEO_V4L1_COMPAT case DECODER_SET_VBI_BYPASS: case DECODER_ENABLE_OUTPUT: case DECODER_GET_STATUS: @@ -424,6 +425,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) case VIDIOCCAPTURE: case VIDIOCSYNC: case VIDIOCSWRITEMODE: +#endif case TUNER_SET_TYPE_ADDR: case TUNER_SET_STANDBY: case TDA9887_SET_CONFIG: @@ -755,6 +757,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) p->afc); break; } +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGVBIFMT: case VIDIOCSVBIFMT: { @@ -924,6 +927,14 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) p->clipcount); break; } + case VIDIOCGFREQ: + case VIDIOCSFREQ: + { + unsigned long *p=arg; + printk ("%s: value=%lu\n", s, *p); + break; + } +#endif case VIDIOC_INT_AUDIO_CLOCK_FREQ: case VIDIOC_INT_I2S_CLOCK_FREQ: case VIDIOC_INT_S_STANDBY: @@ -933,13 +944,6 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) printk ("%s: value=%d\n", s, *p); break; } - case VIDIOCGFREQ: - case VIDIOCSFREQ: - { - unsigned long *p=arg; - printk ("%s: value=%lu\n", s, *p); - break; - } case VIDIOC_G_STD: case VIDIOC_S_STD: case VIDIOC_QUERYSTD: diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c index b26ebaff226f..88bf2af2a0e7 100644 --- a/drivers/media/video/videodev.c +++ b/drivers/media/video/videodev.c @@ -760,7 +760,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, ret=vfd->vidioc_overlay(file, fh, *i); break; } -#ifdef HAVE_V4L1 +#ifdef CONFIG_VIDEO_V4L1_COMPAT /* --- streaming capture ------------------------------------- */ case VIDIOCGMBUF: { @@ -1512,6 +1512,7 @@ int video_register_device(struct video_device *vfd, int type, int nr) int i=0; int base; int end; + int ret; char *name_base; switch(type) @@ -1537,6 +1538,8 @@ int video_register_device(struct video_device *vfd, int type, int nr) name_base = "radio"; break; default: + printk(KERN_ERR "%s called with unknown type: %d\n", + __FUNCTION__, type); return -1; } @@ -1571,9 +1574,18 @@ int video_register_device(struct video_device *vfd, int type, int nr) vfd->class_dev.class = &video_class; vfd->class_dev.devt = MKDEV(VIDEO_MAJOR, vfd->minor); sprintf(vfd->class_dev.class_id, "%s%d", name_base, i - base); - class_device_register(&vfd->class_dev); - class_device_create_file(&vfd->class_dev, - &class_device_attr_name); + ret = class_device_register(&vfd->class_dev); + if (ret < 0) { + printk(KERN_ERR "%s: class_device_register failed\n", + __FUNCTION__); + goto fail_minor; + } + ret = class_device_create_file(&vfd->class_dev, &class_device_attr_name); + if (ret < 0) { + printk(KERN_ERR "%s: class_device_create_file 'name' failed\n", + __FUNCTION__); + goto fail_classdev; + } #if 1 /* needed until all drivers are fixed */ @@ -1583,6 +1595,15 @@ int video_register_device(struct video_device *vfd, int type, int nr) "http://lwn.net/Articles/36850/\n", vfd->name); #endif return 0; + +fail_classdev: + class_device_unregister(&vfd->class_dev); +fail_minor: + mutex_lock(&videodev_lock); + video_device[vfd->minor] = NULL; + vfd->minor = -1; + mutex_unlock(&videodev_lock); + return ret; } /** diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 41d23c8acbd8..841884af0cc0 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -986,7 +986,7 @@ static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p) file->f_flags & O_NONBLOCK)); } -#ifdef HAVE_V4L1 +#ifdef CONFIG_VIDEO_V4L1_COMPAT static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf) { struct vivi_fh *fh=priv; @@ -1328,7 +1328,7 @@ static struct video_device vivi = { .vidioc_s_ctrl = vidioc_s_ctrl, .vidioc_streamon = vidioc_streamon, .vidioc_streamoff = vidioc_streamoff, -#ifdef HAVE_V4L1 +#ifdef CONFIG_VIDEO_V4L1_COMPAT .vidiocgmbuf = vidiocgmbuf, #endif .tvnorms = tvnorms, |