diff options
Diffstat (limited to 'drivers/media')
64 files changed, 3222 insertions, 594 deletions
diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index 3fe158ac7bbf..4216328552f6 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -2750,3 +2750,26 @@ IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE] = { [0x1b] = KEY_B, /*recall*/ }; EXPORT_SYMBOL_GPL(ir_codes_dm1105_nec); + +/* EVGA inDtube + Devin Heitmueller <devin.heitmueller@gmail.com> + */ +IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE] = { + [0x12] = KEY_POWER, + [0x02] = KEY_MODE, /* TV */ + [0x14] = KEY_MUTE, + [0x1a] = KEY_CHANNELUP, + [0x16] = KEY_TV2, /* PIP */ + [0x1d] = KEY_VOLUMEUP, + [0x05] = KEY_CHANNELDOWN, + [0x0f] = KEY_PLAYPAUSE, + [0x19] = KEY_VOLUMEDOWN, + [0x1c] = KEY_REWIND, + [0x0d] = KEY_RECORD, + [0x18] = KEY_FORWARD, + [0x1e] = KEY_PREVIOUS, + [0x1b] = KEY_STOP, + [0x1f] = KEY_NEXT, + [0x13] = KEY_CAMERA, +}; +EXPORT_SYMBOL_GPL(ir_codes_evga_indtube); diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c index b6da9c3873fe..aa20ce8cc668 100644 --- a/drivers/media/common/tuners/tuner-xc2028.c +++ b/drivers/media/common/tuners/tuner-xc2028.c @@ -1096,8 +1096,19 @@ static int xc2028_set_params(struct dvb_frontend *fe, } /* All S-code tables need a 200kHz shift */ - if (priv->ctrl.demod) + if (priv->ctrl.demod) { demod = priv->ctrl.demod + 200; + /* + * The DTV7 S-code table needs a 700 kHz shift. + * Thanks to Terry Wu <terrywu2009@gmail.com> for reporting this + * + * DTV7 is only used in Australia. Germany or Italy may also + * use this firmware after initialization, but a tune to a UHF + * channel should then cause DTV78 to be used. + */ + if (type & DTV7) + demod += 500; + } return generic_set_freq(fe, p->frequency, T_DIGITAL_TV, type, 0, demod); diff --git a/drivers/media/dvb/frontends/stv0900.h b/drivers/media/dvb/frontends/stv0900.h index 8a1332c2031d..bf4e9b633044 100644 --- a/drivers/media/dvb/frontends/stv0900.h +++ b/drivers/media/dvb/frontends/stv0900.h @@ -29,6 +29,11 @@ #include <linux/dvb/frontend.h> #include "dvb_frontend.h" +struct stv0900_reg { + u16 addr; + u8 val; +}; + struct stv0900_config { u8 demod_address; u32 xtal; @@ -38,7 +43,7 @@ struct stv0900_config { u8 path1_mode; u8 path2_mode; - + struct stv0900_reg *ts_config_regs; u8 tun1_maddress;/* 0, 1, 2, 3 for 0xc0, 0xc2, 0xc4, 0xc6 */ u8 tun2_maddress; u8 tun1_adc;/* 1 for stv6110, 2 for stb6100 */ diff --git a/drivers/media/dvb/frontends/stv0900_core.c b/drivers/media/dvb/frontends/stv0900_core.c index 8499bcf7f251..1da045fbb4ef 100644 --- a/drivers/media/dvb/frontends/stv0900_core.c +++ b/drivers/media/dvb/frontends/stv0900_core.c @@ -149,31 +149,31 @@ void stv0900_write_reg(struct stv0900_internal *i_params, u16 reg_addr, dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret); } -u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg_addr) +u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg) { - u8 data[2]; int ret; - struct i2c_msg i2cmsg = { - .addr = i_params->i2c_addr, - .flags = 0, - .len = 2, - .buf = data, + u8 b0[] = { MSB(reg), LSB(reg) }; + u8 buf = 0; + struct i2c_msg msg[] = { + { + .addr = i_params->i2c_addr, + .flags = 0, + .buf = b0, + .len = 2, + }, { + .addr = i_params->i2c_addr, + .flags = I2C_M_RD, + .buf = &buf, + .len = 1, + }, }; - data[0] = MSB(reg_addr); - data[1] = LSB(reg_addr); - - ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1); - if (ret != 1) - dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret); - - i2cmsg.flags = I2C_M_RD; - i2cmsg.len = 1; - ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1); - if (ret != 1) - dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret); + ret = i2c_transfer(i_params->i2c_adap, msg, 2); + if (ret != 2) + dprintk(KERN_ERR "%s: i2c error %d, reg[0x%02x]\n", + __func__, ret, reg); - return data[0]; + return buf; } void extract_mask_pos(u32 label, u8 *mask, u8 *pos) @@ -712,6 +712,44 @@ static s32 stv0900_carr_get_quality(struct dvb_frontend *fe, return c_n; } +static int stv0900_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *i_params = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + u8 err_val1, err_val0; + s32 err_field1, err_field0; + u32 header_err_val = 0; + + *ucblocks = 0x0; + if (stv0900_get_standard(fe, demod) == STV0900_DVBS2_STANDARD) { + /* DVB-S2 delineator errors count */ + + /* retreiving number for errnous headers */ + dmd_reg(err_field0, R0900_P1_BBFCRCKO0, + R0900_P2_BBFCRCKO0); + dmd_reg(err_field1, R0900_P1_BBFCRCKO1, + R0900_P2_BBFCRCKO1); + + err_val1 = stv0900_read_reg(i_params, err_field1); + err_val0 = stv0900_read_reg(i_params, err_field0); + header_err_val = (err_val1<<8) | err_val0; + + /* retreiving number for errnous packets */ + dmd_reg(err_field0, R0900_P1_UPCRCKO0, + R0900_P2_UPCRCKO0); + dmd_reg(err_field1, R0900_P1_UPCRCKO1, + R0900_P2_UPCRCKO1); + + err_val1 = stv0900_read_reg(i_params, err_field1); + err_val0 = stv0900_read_reg(i_params, err_field0); + *ucblocks = (err_val1<<8) | err_val0; + *ucblocks += header_err_val; + } + + return 0; +} + static int stv0900_read_snr(struct dvb_frontend *fe, u16 *snr) { *snr = stv0900_carr_get_quality(fe, @@ -1355,7 +1393,7 @@ static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe, struct stv0900_state *state = fe->demodulator_priv; enum fe_stv0900_error error = STV0900_NO_ERROR; enum fe_stv0900_error demodError = STV0900_NO_ERROR; - int selosci; + int selosci, i; struct stv0900_inode *temp_int = find_inode(state->i2c_adap, state->config->demod_address); @@ -1402,7 +1440,23 @@ static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe, stv0900_write_bits(state->internal, F0900_P1_ROLLOFF_CONTROL, p_init->rolloff); stv0900_write_bits(state->internal, F0900_P2_ROLLOFF_CONTROL, p_init->rolloff); - stv0900_set_ts_parallel_serial(state->internal, p_init->path1_ts_clock, p_init->path2_ts_clock); + state->internal->ts_config = p_init->ts_config; + if (state->internal->ts_config == NULL) + stv0900_set_ts_parallel_serial(state->internal, + p_init->path1_ts_clock, + p_init->path2_ts_clock); + else { + for (i = 0; state->internal->ts_config[i].addr != 0xffff; i++) + stv0900_write_reg(state->internal, + state->internal->ts_config[i].addr, + state->internal->ts_config[i].val); + + stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 1); + stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 0); + stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 1); + stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 0); + } + stv0900_write_bits(state->internal, F0900_P1_TUN_MADDRESS, p_init->tun1_maddress); switch (p_init->tuner1_adc) { case 1: @@ -1882,6 +1936,7 @@ static struct dvb_frontend_ops stv0900_ops = { .read_ber = stv0900_read_ber, .read_signal_strength = stv0900_read_signal_strength, .read_snr = stv0900_read_snr, + .read_ucblocks = stv0900_read_ucblocks, }; struct dvb_frontend *stv0900_attach(const struct stv0900_config *config, @@ -1915,6 +1970,7 @@ struct dvb_frontend *stv0900_attach(const struct stv0900_config *config, init_params.tun1_iq_inversion = STV0900_IQ_NORMAL; init_params.tuner1_adc = config->tun1_adc; init_params.path2_ts_clock = config->path2_mode; + init_params.ts_config = config->ts_config_regs; init_params.tun2_maddress = config->tun2_maddress; init_params.tuner2_adc = config->tun2_adc; init_params.tun2_iq_inversion = STV0900_IQ_SWAPPED; diff --git a/drivers/media/dvb/frontends/stv0900_priv.h b/drivers/media/dvb/frontends/stv0900_priv.h index 67dc8ec634e2..5ed7a145c7d3 100644 --- a/drivers/media/dvb/frontends/stv0900_priv.h +++ b/drivers/media/dvb/frontends/stv0900_priv.h @@ -271,6 +271,7 @@ struct stv0900_init_params{ /* IQ from the tuner2 to the demod */ enum stv0900_iq_inversion tun2_iq_inversion; + struct stv0900_reg *ts_config; }; struct stv0900_search_params { @@ -363,6 +364,7 @@ struct stv0900_internal{ u8 i2c_addr; u8 clkmode;/* 0 for CLKI, 2 for XTALI */ u8 chip_id; + struct stv0900_reg *ts_config; enum fe_stv0900_error errs; int dmds_used; }; diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c index 96ef745a2e4e..488bdfb34fb3 100644 --- a/drivers/media/dvb/frontends/stv090x.c +++ b/drivers/media/dvb/frontends/stv090x.c @@ -2674,7 +2674,7 @@ static u8 stv090x_optimize_carloop(struct stv090x_state *state, enum stv090x_mod static u8 stv090x_optimize_carloop_short(struct stv090x_state *state) { - struct stv090x_short_frame_crloop *short_crl; + struct stv090x_short_frame_crloop *short_crl = NULL; s32 index = 0; u8 aclc = 0x0b; @@ -2694,10 +2694,13 @@ static u8 stv090x_optimize_carloop_short(struct stv090x_state *state) break; } - if (state->dev_ver >= 0x30) - short_crl = stv090x_s2_short_crl_cut20; - else if (state->dev_ver >= 0x20) + if (state->dev_ver >= 0x30) { + /* Cut 3.0 and up */ short_crl = stv090x_s2_short_crl_cut30; + } else { + /* Cut 2.0 and up: we don't support cuts older than 2.0 */ + short_crl = stv090x_s2_short_crl_cut20; + } if (state->srate <= 3000000) aclc = short_crl[index].crl_2; diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c index 4302c563a6b8..cc8862ce4aae 100644 --- a/drivers/media/dvb/frontends/tda10048.c +++ b/drivers/media/dvb/frontends/tda10048.c @@ -210,6 +210,7 @@ static struct pll_tab { { TDA10048_CLK_4000, TDA10048_IF_36130, 10, 0, 0 }, { TDA10048_CLK_16000, TDA10048_IF_3300, 10, 3, 0 }, { TDA10048_CLK_16000, TDA10048_IF_3500, 10, 3, 0 }, + { TDA10048_CLK_16000, TDA10048_IF_3800, 10, 3, 0 }, { TDA10048_CLK_16000, TDA10048_IF_4000, 10, 3, 0 }, { TDA10048_CLK_16000, TDA10048_IF_4300, 10, 3, 0 }, { TDA10048_CLK_16000, TDA10048_IF_36130, 10, 3, 0 }, diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c index 32be382f0e97..a246903c3341 100644 --- a/drivers/media/dvb/siano/smscoreapi.c +++ b/drivers/media/dvb/siano/smscoreapi.c @@ -1422,8 +1422,8 @@ int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum, struct smscore_gpio_config *pGpioConfig) { u32 totalLen; - u32 TranslatedPinNum; - u32 GroupNum; + u32 TranslatedPinNum = 0; + u32 GroupNum = 0; u32 ElectricChar; u32 groupCfg; void *buffer; diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index 68eb4493f991..d8d4214fd65f 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -1,5 +1,6 @@ config TTPCI_EEPROM tristate + depends on I2C default n config DVB_AV7110 diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 640421ceb24a..46d216329611 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -1200,7 +1200,7 @@ static int si470x_fops_release(struct file *file) video_unregister_device(radio->videodev); kfree(radio->buffer); kfree(radio); - goto done; + goto unlock; } /* stop rds reception */ @@ -1213,9 +1213,8 @@ static int si470x_fops_release(struct file *file) retval = si470x_stop(radio); usb_autopm_put_interface(radio->intf); } - +unlock: mutex_unlock(&radio->disconnect_lock); - done: return retval; } diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c index 393623818ade..3cd76dddb6aa 100644 --- a/drivers/media/radio/radio-tea5764.c +++ b/drivers/media/radio/radio-tea5764.c @@ -322,7 +322,9 @@ static int vidioc_g_tuner(struct file *file, void *priv, v->rangehigh = FREQ_MAX * FREQ_MUL; v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; if (r->tunchk & TEA5764_TUNCHK_STEREO) - v->rxsubchans = V4L2_TUNER_SUB_STEREO; + v->rxsubchans = V4L2_TUNER_SUB_STEREO; + else + v->rxsubchans = V4L2_TUNER_SUB_MONO; v->audmode = tea5764_get_audout_mode(radio); v->signal = TEA5764_TUNCHK_LEVEL(r->tunchk) * 0xffff / 0xf; v->afc = TEA5764_TUNCHK_IFCNT(r->tunchk); diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 94f440535c64..84b6fc15519d 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -312,6 +312,14 @@ config VIDEO_OV7670 OV7670 VGA camera. It currently only works with the M88ALP01 controller. +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + config VIDEO_TCM825X tristate "TCM825x camera sensor support" depends on I2C && VIDEO_V4L2 @@ -866,9 +874,13 @@ config USB_W9968CF module will be called w9968cf. config USB_OV511 - tristate "USB OV511 Camera support" + tristate "USB OV511 Camera support (DEPRECATED)" depends on VIDEO_V4L1 ---help--- + This driver is DEPRECATED please use the gspca ov519 module + instead. Note that for the ov511 / ov518 support of the gspca module + you need atleast version 0.6.0 of libv4l. + Say Y here if you want to connect this type of camera to your computer's USB port. See <file:Documentation/video4linux/ov511.txt> for more information and for a list of supported cameras. diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 7fb3add1b387..9f2e3214a482 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_OV7670) += ov7670.o obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o +obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index c92a25036f0e..36f2d76006fd 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -198,11 +198,14 @@ static const struct cx18_card_pci_info cx18_pci_mpc718[] = { static const struct cx18_card cx18_card_mpc718 = { .type = CX18_CARD_YUAN_MPC718, - .name = "Yuan MPC718", - .comment = "Analog video capture works; some audio line in may not.\n", + .name = "Yuan MPC718 MiniPCI DVB-T/Analog", + .comment = "Experimenters needed for device to work well.\n" + "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_418_AV, - .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL, + .hw_muxer = CX18_HW_GPIO_MUX, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | + CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL, .video_inputs = { { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, { CX18_CARD_INPUT_SVIDEO1, 1, @@ -211,27 +214,34 @@ static const struct cx18_card cx18_card_mpc718 = { { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 }, { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 }, - { CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 }, }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, - { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 0 }, - { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL1, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL2, 1 }, }, - .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 0 }, .tuners = { /* XC3028 tuner */ { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, }, + /* FIXME - the FM radio is just a guess and driver doesn't use SIF */ + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, .ddr = { - /* Probably Samsung K4D263238G-VC33 memory */ - .chip_config = 0x003, - .refresh = 0x30c, - .timing1 = 0x23230b73, - .timing2 = 0x08, + /* Hynix HY5DU283222B DDR RAM */ + .chip_config = 0x303, + .refresh = 0x3bd, + .timing1 = 0x36320966, + .timing2 = 0x1f, .tune_lane = 0, .initial_emrs = 2, }, + .gpio_init.initial_value = 0x1, + .gpio_init.direction = 0x3, + /* FIXME - these GPIO's are just guesses */ + .gpio_audio_input = { .mask = 0x3, + .tuner = 0x1, + .linein = 0x3, + .radio = 0x1 }, .xceive_pin = 0, .pci_list = cx18_pci_mpc718, .i2c = &cx18_i2c_std, diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c index 8e35c3aed544..5136df198338 100644 --- a/drivers/media/video/cx18/cx18-controls.c +++ b/drivers/media/video/cx18/cx18-controls.c @@ -61,6 +61,8 @@ int cx18_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl) switch (qctrl->id) { /* Standard V4L2 controls */ + case V4L2_CID_USER_CLASS: + return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); case V4L2_CID_BRIGHTNESS: case V4L2_CID_HUE: case V4L2_CID_SATURATION: diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c index 6ea3fe623ef4..51a0c33b25b7 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -30,6 +30,10 @@ #include "s5h1409.h" #include "mxl5005s.h" #include "zl10353.h" + +#include <linux/firmware.h> +#include "mt352.h" +#include "mt352_priv.h" #include "tuner-xc2028.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -38,6 +42,11 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); #define CX18_CLOCK_ENABLE2 0xc71024 #define CX18_DMUX_CLK_MASK 0x0080 +/* + * CX18_CARD_HVR_1600_ESMT + * CX18_CARD_HVR_1600_SAMSUNG + */ + static struct mxl5005s_config hauppauge_hvr1600_tuner = { .i2c_address = 0xC6 >> 1, .if_freq = IF_FREQ_5380000HZ, @@ -65,6 +74,9 @@ static struct s5h1409_config hauppauge_hvr1600_config = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK }; +/* + * CX18_CARD_LEADTEK_DVR3100H + */ /* Information/confirmation of proper config values provided by Terry Wu */ static struct zl10353_config leadtek_dvr3100h_demod = { .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ @@ -74,6 +86,121 @@ static struct zl10353_config leadtek_dvr3100h_demod = { .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ }; +/* + * CX18_CARD_YUAN_MPC718 + */ +/* + * Due to + * + * 1. an absence of information on how to prgram the MT352 + * 2. the Linux mt352 module pushing MT352 initialzation off onto us here + * + * We have to use an init sequence that *you* must extract from the Windows + * driver (yuanrap.sys) and which we load as a firmware. + * + * If someone can provide me with a Zarlink MT352 (Intel CE6352?) Design Manual + * with chip programming details, then I can remove this annoyance. + */ +static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream, + const struct firmware **fw) +{ + struct cx18 *cx = stream->cx; + const char *fn = "dvb-cx18-mpc718-mt352.fw"; + int ret; + + ret = request_firmware(fw, fn, &cx->pci_dev->dev); + if (ret) + CX18_ERR("Unable to open firmware file %s\n", fn); + else { + size_t sz = (*fw)->size; + if (sz < 2 || sz > 64 || (sz % 2) != 0) { + CX18_ERR("Firmware %s has a bad size: %lu bytes\n", + fn, (unsigned long) sz); + ret = -EILSEQ; + release_firmware(*fw); + *fw = NULL; + } + } + + if (ret) { + CX18_ERR("The MPC718 board variant with the MT352 DVB-T" + "demodualtor will not work without it\n"); + CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware " + "mpc718' if you need the firmware\n"); + } + return ret; +} + +static int yuan_mpc718_mt352_init(struct dvb_frontend *fe) +{ + struct cx18_dvb *dvb = container_of(fe->dvb, + struct cx18_dvb, dvb_adapter); + struct cx18_stream *stream = container_of(dvb, struct cx18_stream, dvb); + const struct firmware *fw = NULL; + int ret; + int i; + u8 buf[3]; + + ret = yuan_mpc718_mt352_reqfw(stream, &fw); + if (ret) + return ret; + + /* Loop through all the register-value pairs in the firmware file */ + for (i = 0; i < fw->size; i += 2) { + buf[0] = fw->data[i]; + /* Intercept a few registers we want to set ourselves */ + switch (buf[0]) { + case TRL_NOMINAL_RATE_0: + /* Set our custom OFDM bandwidth in the case below */ + break; + case TRL_NOMINAL_RATE_1: + /* 6 MHz: 64/7 * 6/8 / 20.48 * 2^16 = 0x55b6.db6 */ + /* 7 MHz: 64/7 * 7/8 / 20.48 * 2^16 = 0x6400 */ + /* 8 MHz: 64/7 * 8/8 / 20.48 * 2^16 = 0x7249.249 */ + buf[1] = 0x72; + buf[2] = 0x49; + mt352_write(fe, buf, 3); + break; + case INPUT_FREQ_0: + /* Set our custom IF in the case below */ + break; + case INPUT_FREQ_1: + /* 4.56 MHz IF: (20.48 - 4.56)/20.48 * 2^14 = 0x31c0 */ + buf[1] = 0x31; + buf[2] = 0xc0; + mt352_write(fe, buf, 3); + break; + default: + /* Pass through the register-value pair from the fw */ + buf[1] = fw->data[i+1]; + mt352_write(fe, buf, 2); + break; + } + } + + buf[0] = (u8) TUNER_GO; + buf[1] = 0x01; /* Go */ + mt352_write(fe, buf, 2); + release_firmware(fw); + return 0; +} + +static struct mt352_config yuan_mpc718_mt352_demod = { + .demod_address = 0x1e >> 1, + .adc_clock = 20480, /* 20.480 MHz */ + .if2 = 4560, /* 4.560 MHz */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .demod_init = yuan_mpc718_mt352_init, +}; + +static struct zl10353_config yuan_mpc718_zl10353_demod = { + .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ + .if2 = 45600, /* 4.560 MHz IF from the XC3028 */ + .parallel_ts = 1, /* Not a serial TS */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ +}; + static int dvb_register(struct cx18_stream *stream); /* Kernel DVB framework calls this when the feed needs to start. @@ -113,6 +240,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) break; case CX18_CARD_LEADTEK_DVR3100H: + case CX18_CARD_YUAN_MPC718: default: /* Assumption - Parallel transport - Signalling * undefined or default. @@ -326,6 +454,38 @@ static int dvb_register(struct cx18_stream *stream) fe->ops.tuner_ops.set_config(fe, &ctrl); } break; + case CX18_CARD_YUAN_MPC718: + /* + * TODO + * Apparently, these cards also could instead have a + * DiBcom demod supported by one of the db7000 drivers + */ + dvb->fe = dvb_attach(mt352_attach, + &yuan_mpc718_mt352_demod, + &cx->i2c_adap[1]); + if (dvb->fe == NULL) + dvb->fe = dvb_attach(zl10353_attach, + &yuan_mpc718_zl10353_demod, + &cx->i2c_adap[1]); + if (dvb->fe != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &cx->i2c_adap[1], + .i2c_addr = 0xc2 >> 1, + .ctrl = NULL, + }; + static struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + .type = XC2028_AUTO, + }; + + fe = dvb_attach(xc2028_attach, dvb->fe, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctrl); + } + break; default: /* No Digital Tv Support */ break; diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c index 6a9464079b4c..28f48f41f218 100644 --- a/drivers/media/video/cx231xx/cx231xx-avcore.c +++ b/drivers/media/video/cx231xx/cx231xx-avcore.c @@ -1052,22 +1052,13 @@ int cx231xx_set_audio_decoder_input(struct cx231xx *dev, /* Set resolution of the video */ int cx231xx_resolution_set(struct cx231xx *dev) { - int width, height; - u32 hscale, vscale; - int status = 0; - - width = dev->width; - height = dev->height; - - get_scale(dev, width, height, &hscale, &vscale); - /* set horzontal scale */ - status = vid_blk_write_word(dev, HSCALE_CTRL, hscale); + int status = vid_blk_write_word(dev, HSCALE_CTRL, dev->hscale); + if (status) + return status; /* set vertical scale */ - status = vid_blk_write_word(dev, VSCALE_CTRL, vscale); - - return status; + return vid_blk_write_word(dev, VSCALE_CTRL, dev->vscale); } /****************************************************************************** @@ -2055,7 +2046,7 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type) int cx231xx_capture_start(struct cx231xx *dev, int start, u8 media_type) { - int rc; + int rc = -1; u32 ep_mask = -1; struct pcb_config *pcb_config; diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c index a23ae73fe634..609bae6098d3 100644 --- a/drivers/media/video/cx231xx/cx231xx-video.c +++ b/drivers/media/video/cx231xx/cx231xx-video.c @@ -893,9 +893,9 @@ static int check_dev(struct cx231xx *dev) return 0; } -void get_scale(struct cx231xx *dev, - unsigned int width, unsigned int height, - unsigned int *hscale, unsigned int *vscale) +static void get_scale(struct cx231xx *dev, + unsigned int width, unsigned int height, + unsigned int *hscale, unsigned int *vscale) { unsigned int maxw = norm_maxw(dev); unsigned int maxh = norm_maxh(dev); @@ -907,10 +907,6 @@ void get_scale(struct cx231xx *dev, *vscale = (((unsigned long)maxh) << 12) / height - 4096L; if (*vscale >= 0x4000) *vscale = 0x3fff; - - dev->hscale = *hscale; - dev->vscale = *vscale; - } /* ------------------------------------------------------------------ @@ -955,8 +951,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, { struct cx231xx_fh *fh = priv; struct cx231xx *dev = fh->dev; - int width = f->fmt.pix.width; - int height = f->fmt.pix.height; + unsigned int width = f->fmt.pix.width; + unsigned int height = f->fmt.pix.height; unsigned int maxw = norm_maxw(dev); unsigned int maxh = norm_maxh(dev); unsigned int hscale, vscale; @@ -971,17 +967,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, /* width must even because of the YUYV format height must be even because of interlacing */ - height &= 0xfffe; - width &= 0xfffe; - - if (unlikely(height < 32)) - height = 32; - if (unlikely(height > maxh)) - height = maxh; - if (unlikely(width < 48)) - width = 48; - if (unlikely(width > maxw)) - width = maxw; + v4l_bound_align_image(&width, 48, maxw, 1, &height, 32, maxh, 1, 0); get_scale(dev, width, height, &hscale, &vscale); diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h index e38eb2d425f7..a0f823ac6b8d 100644 --- a/drivers/media/video/cx231xx/cx231xx.h +++ b/drivers/media/video/cx231xx/cx231xx.h @@ -722,9 +722,6 @@ int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input); int cx231xx_set_decoder_video_input(struct cx231xx *dev, u8 pin_type, u8 input); int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev); int cx231xx_set_audio_input(struct cx231xx *dev, u8 input); -void get_scale(struct cx231xx *dev, - unsigned int width, unsigned int height, - unsigned int *hscale, unsigned int *vscale); /* Provided by cx231xx-video.c */ int cx231xx_register_extension(struct cx231xx_ops *dev); diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c index 8ded52946334..4c8e95853fa3 100644 --- a/drivers/media/video/cx2341x.c +++ b/drivers/media/video/cx2341x.c @@ -500,6 +500,8 @@ int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params, int err; switch (qctrl->id) { + case V4L2_CID_MPEG_CLASS: + return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); case V4L2_CID_MPEG_STREAM_TYPE: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_STREAM_TYPE_MPEG2_PS, diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index e236df23370e..86ac529e62be 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -45,6 +45,7 @@ #include "dibx000_common.h" #include "zl10353.h" #include "stv0900.h" +#include "stv0900_reg.h" #include "stv6110.h" #include "lnbh24.h" #include "cx24116.h" @@ -242,12 +243,22 @@ static struct tda18271_std_map hauppauge_tda18271_std_map = { .if_lvl = 6, .rfagc_top = 0x37 }, }; +static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = { + .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, + .if_lvl = 1, .rfagc_top = 0x37, }, +}; + static struct tda18271_config hauppauge_tda18271_config = { .std_map = &hauppauge_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, }; static struct tda18271_config hauppauge_hvr1200_tuner_config = { + .std_map = &hauppauge_hvr1200_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, }; @@ -370,13 +381,25 @@ static struct zl10353_config dvico_fusionhdtv_xc3028 = { .disable_i2c_gate_ctrl = 1, }; +static struct stv0900_reg stv0900_ts_regs[] = { + { R0900_TSGENERAL, 0x00 }, + { R0900_P1_TSSPEED, 0x40 }, + { R0900_P2_TSSPEED, 0x40 }, + { R0900_P1_TSCFGM, 0xc0 }, + { R0900_P2_TSCFGM, 0xc0 }, + { R0900_P1_TSCFGH, 0xe0 }, + { R0900_P2_TSCFGH, 0xe0 }, + { R0900_P1_TSCFGL, 0x20 }, + { R0900_P2_TSCFGL, 0x20 }, + { 0xffff, 0xff }, /* terminate */ +}; + static struct stv0900_config netup_stv0900_config = { .demod_address = 0x68, .xtal = 27000000, .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ .diseqc_mode = 2,/* 2/3 PWM */ - .path1_mode = 2,/*Serial continues clock */ - .path2_mode = 2,/*Serial continues clock */ + .ts_config_regs = stv0900_ts_regs, .tun1_maddress = 0,/* 0x60 */ .tun2_maddress = 3,/* 0x63 */ .tun1_adc = 1,/* 1 Vpp */ @@ -440,6 +463,30 @@ static struct xc5000_config mygica_x8506_xc5000_config = { .if_khz = 5380, }; +static int cx23885_dvb_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *param) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1275: + switch (param->u.vsb.modulation) { + case VSB_8: + cx23885_gpio_clear(dev, GPIO_5); + break; + case QAM_64: + case QAM_256: + default: + cx23885_gpio_set(dev, GPIO_5); + break; + } + break; + } + return (port->set_frontend_save) ? + port->set_frontend_save(fe, param) : -ENODEV; +} + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; @@ -479,6 +526,12 @@ static int dvb_register(struct cx23885_tsport *port) 0x60, &dev->i2c_bus[1].i2c_adap, &hauppauge_hvr127x_config); } + + /* FIXME: temporary hack */ + /* define bridge override to set_frontend */ + port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend; + fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend; + break; case CX23885_BOARD_HAUPPAUGE_HVR1255: i2c_bus = &dev->i2c_bus[0]; @@ -736,7 +789,8 @@ static int dvb_register(struct cx23885_tsport *port) if (!dvb_attach(lnbh24_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, - LNBH24_PCL, 0, 0x09)) + LNBH24_PCL, + LNBH24_TTX, 0x09)) printk(KERN_ERR "No LNBH24 found!\n"); @@ -756,7 +810,8 @@ static int dvb_register(struct cx23885_tsport *port) if (!dvb_attach(lnbh24_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, - LNBH24_PCL, 0, 0x0a)) + LNBH24_PCL, + LNBH24_TTX, 0x0a)) printk(KERN_ERR "No LNBH24 found!\n"); diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 66bbd2e71105..70836af3ab48 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -963,15 +963,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, } f->fmt.pix.field = field; - if (f->fmt.pix.height < 32) - f->fmt.pix.height = 32; - if (f->fmt.pix.height > maxh) - f->fmt.pix.height = maxh; - if (f->fmt.pix.width < 48) - f->fmt.pix.width = 48; - if (f->fmt.pix.width > maxw) - f->fmt.pix.width = maxw; - f->fmt.pix.width &= ~0x03; + v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2, + &f->fmt.pix.height, 32, maxh, 0, 0); f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; f->fmt.pix.sizeimage = diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 1a2ac518a3f1..214a55e943b7 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -288,6 +288,10 @@ struct cx23885_tsport { /* Allow a single tsport to have multiple frontends */ u32 num_frontends; void *port_priv; + + /* FIXME: temporary hack */ + int (*set_frontend_save) (struct dvb_frontend *, + struct dvb_frontend_parameters *); }; struct cx23885_dev { diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 94b7a52629d0..a5cc1c1fc2d6 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1524,33 +1524,45 @@ static const struct cx88_board cx88_boards[] = { }, .mpeg = CX88_MPEG_DVB, }, + /* Terry Wu <terrywu2009@gmail.com> */ + /* TV Audio : set GPIO 2, 18, 19 value to 0, 1, 0 */ + /* FM Audio : set GPIO 2, 18, 19 value to 0, 0, 0 */ + /* Line-in Audio : set GPIO 2, 18, 19 value to 0, 1, 1 */ + /* Mute Audio : set GPIO 2 value to 1 */ [CX88_BOARD_WINFAST_TV2000_XP_GLOBAL] = { - .name = "Winfast TV2000 XP Global", + .name = "Leadtek TV2000 XP Global", .tuner_type = TUNER_XC2028, .tuner_addr = 0x61, + .radio_type = TUNER_XC2028, + .radio_addr = 0x61, .input = { { .type = CX88_VMUX_TELEVISION, .vmux = 0, - .gpio0 = 0x0400, /* pin 2:mute = 0 (off?) */ + .gpio0 = 0x0400, /* pin 2 = 0 */ .gpio1 = 0x0000, - .gpio2 = 0x0800, /* pin 19:audio = 0 (tv) */ - + .gpio2 = 0x0C04, /* pin 18 = 1, pin 19 = 0 */ + .gpio3 = 0x0000, }, { .type = CX88_VMUX_COMPOSITE1, .vmux = 1, - .gpio0 = 0x0400, /* probably? or 0x0404 to turn mute on */ + .gpio0 = 0x0400, /* pin 2 = 0 */ .gpio1 = 0x0000, - .gpio2 = 0x0808, /* pin 19:audio = 1 (line) */ - + .gpio2 = 0x0C0C, /* pin 18 = 1, pin 19 = 1 */ + .gpio3 = 0x0000, }, { .type = CX88_VMUX_SVIDEO, .vmux = 2, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x0000, + .gpio2 = 0x0C0C, /* pin 18 = 1, pin 19 = 1 */ + .gpio3 = 0x0000, } }, .radio = { .type = CX88_RADIO, - .gpio0 = 0x004ff, - .gpio1 = 0x010ff, - .gpio2 = 0x0ff, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x0000, + .gpio2 = 0x0C00, /* pin 18 = 0, pin 19 = 0 */ + .gpio3 = 0x0000, }, }, [CX88_BOARD_POWERCOLOR_REAL_ANGEL] = { @@ -2438,6 +2450,41 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0x107d, .subdevice = 0x6654, .card = CX88_BOARD_WINFAST_DTV1800H, + }, { + /* PVR2000 PAL Model [107d:6630] */ + .subvendor = 0x107d, + .subdevice = 0x6630, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 PAL Model [107d:6638] */ + .subvendor = 0x107d, + .subdevice = 0x6638, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 NTSC Model [107d:6631] */ + .subvendor = 0x107d, + .subdevice = 0x6631, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 NTSC Model [107d:6637] */ + .subvendor = 0x107d, + .subdevice = 0x6637, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 NTSC Model [107d:663d] */ + .subvendor = 0x107d, + .subdevice = 0x663d, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* DV2000 NTSC Model [107d:6621] */ + .subvendor = 0x107d, + .subdevice = 0x6621, + .card = CX88_BOARD_WINFAST_DV2000, + }, { + /* TV2000 XP Global [107d:6618] */ + .subvendor = 0x107d, + .subdevice = 0x6618, + .card = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL, }, }; @@ -2446,12 +2493,6 @@ static const struct cx88_subid cx88_subids[] = { static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data) { - /* This is just for the "Winfast 2000XP Expert" board ATM; I don't have data on - * any others. - * - * Byte 0 is 1 on the NTSC board. - */ - if (eeprom_data[4] != 0x7d || eeprom_data[5] != 0x10 || eeprom_data[7] != 0x66) { @@ -2459,8 +2500,19 @@ static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data) return; } - core->board.tuner_type = (eeprom_data[6] == 0x13) ? - TUNER_PHILIPS_FM1236_MK3 : TUNER_PHILIPS_FM1216ME_MK3; + /* Terry Wu <terrywu2009@gmail.com> */ + switch (eeprom_data[6]) { + case 0x13: /* SSID 6613 for TV2000 XP Expert NTSC Model */ + case 0x21: /* SSID 6621 for DV2000 NTSC Model */ + case 0x31: /* SSID 6631 for PVR2000 NTSC Model */ + case 0x37: /* SSID 6637 for PVR2000 NTSC Model */ + case 0x3d: /* SSID 6637 for PVR2000 NTSC Model */ + core->board.tuner_type = TUNER_PHILIPS_FM1236_MK3; + break; + default: + core->board.tuner_type = TUNER_PHILIPS_FM1216ME_MK3; + break; + } info_printk(core, "Leadtek Winfast 2000XP Expert config: " "tuner=%d, eeprom[0]=0x%02x\n", @@ -2713,7 +2765,6 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core, { /* Board-specific callbacks */ switch (core->boardnr) { - case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_POWERCOLOR_REAL_ANGEL: case CX88_BOARD_GENIATECH_X8000_MT: case CX88_BOARD_KWORLD_ATSC_120: @@ -2725,6 +2776,7 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core, case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: return cx88_dvico_xc2028_callback(core, command, arg); + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_WINFAST_DTV1800H: return cx88_xc3028_winfast1800h_callback(core, command, arg); } @@ -2914,6 +2966,7 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) udelay(1000); break; + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_WINFAST_DTV1800H: /* GPIO 12 (xc3028 tuner reset) */ cx_set(MO_GP1_IO, 0x1010); @@ -2950,6 +3003,7 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: ctl->demod = XC3028_FE_OREN538; break; + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: case CX88_BOARD_PROLINK_PV_8000GT: /* @@ -2993,6 +3047,8 @@ static void cx88_card_setup(struct cx88_core *core) if (0 == core->i2c_rc) gdi_eeprom(core, eeprom); break; + case CX88_BOARD_LEADTEK_PVR2000: + case CX88_BOARD_WINFAST_DV2000: case CX88_BOARD_WINFAST2000XP_EXPERT: if (0 == core->i2c_rc) leadtek_eeprom(core, eeprom); diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 0ccac702bea4..b12770848c00 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -1111,15 +1111,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, } f->fmt.pix.field = field; - if (f->fmt.pix.height < 32) - f->fmt.pix.height = 32; - if (f->fmt.pix.height > maxh) - f->fmt.pix.height = maxh; - if (f->fmt.pix.width < 48) - f->fmt.pix.width = 48; - if (f->fmt.pix.width > maxw) - f->fmt.pix.width = maxw; - f->fmt.pix.width &= ~0x03; + v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2, + &f->fmt.pix.height, 32, maxh, 0, 0); f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; f->fmt.pix.sizeimage = diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig index 16a5af30e9d1..6524b493e033 100644 --- a/drivers/media/video/em28xx/Kconfig +++ b/drivers/media/video/em28xx/Kconfig @@ -8,6 +8,8 @@ config VIDEO_EM28XX select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO + ---help--- This is a video4linux driver for Empia 28xx based TV cards. diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 00cc791a9e44..ebd24a25fb85 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -58,6 +58,8 @@ static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); MODULE_PARM_DESC(card, "card type"); +#define MT9V011_VERSION 0x8243 + /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */ static unsigned long em28xx_devused; @@ -139,6 +141,24 @@ static struct em28xx_reg_seq kworld_330u_digital[] = { { -1, -1, -1, -1}, }; +/* Evga inDtube + GPIO0 - Enable digital power (s5h1409) - low to enable + GPIO1 - Enable analog power (tvp5150/emp202) - low to enable + GPIO4 - xc3028 reset + GOP3 - s5h1409 reset + */ +static struct em28xx_reg_seq evga_indtube_analog[] = { + {EM28XX_R08_GPIO, 0x79, 0xff, 60}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq evga_indtube_digital[] = { + {EM28XX_R08_GPIO, 0x7a, 0xff, 1}, + {EM2880_R04_GPO, 0x04, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 1}, + { -1, -1, -1, -1}, +}; + /* Callback for the most boards */ static struct em28xx_reg_seq default_tuner_gpio[] = { {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, @@ -173,6 +193,13 @@ static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { {EM28XX_R08_GPIO, 0xff, 0xff, 10}, { -1, -1, -1, -1}, }; + +static struct em28xx_reg_seq silvercrest_reg_seq[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM28XX_R08_GPIO, 0x01, 0xf7, 10}, + { -1, -1, -1, -1}, +}; + /* * Board definitions */ @@ -420,6 +447,18 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_VIDEO, } }, }, + [EM2820_BOARD_SILVERCREST_WEBCAM] = { + .name = "Silvercrest Webcam 1.3mpix", + .tuner_type = TUNER_ABSENT, + .is_27xx = 1, + .decoder = EM28XX_MT9V011, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = silvercrest_reg_seq, + } }, + }, [EM2821_BOARD_SUPERCOMP_USB_2] = { .name = "Supercomp USB 2.0 TV", .valid = EM28XX_BOARD_NOT_VALIDATED, @@ -808,7 +847,7 @@ struct em28xx_board em28xx_boards[] = { .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .has_dvb = 1, - .dvb_gpio = default_analog, + .dvb_gpio = default_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, @@ -1449,6 +1488,33 @@ struct em28xx_board em28xx_boards[] = { .gpio = terratec_av350_unmute_gpio, } }, }, + [EM2882_BOARD_EVGA_INDTUBE] = { + .name = "Evga inDtube", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = evga_indtube_digital, + .ir_codes = ir_codes_evga_indtube, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = evga_indtube_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = evga_indtube_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = evga_indtube_analog, + } }, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1571,6 +1637,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = { {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, {0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, + {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, }; /* I2C devicelist hash table for devices with generic USB IDs */ @@ -1593,6 +1660,11 @@ static unsigned short tvp5150_addrs[] = { I2C_CLIENT_END }; +static unsigned short mt9v011_addrs[] = { + 0xba >> 1, + I2C_CLIENT_END +}; + static unsigned short msp3400_addrs[] = { 0x80 >> 1, 0x88 >> 1, @@ -1632,6 +1704,46 @@ static inline void em28xx_set_model(struct em28xx *dev) EM28XX_I2C_FREQ_100_KHZ; } +/* HINT method: webcam I2C chips + * + * This method work for webcams with Micron sensors + */ +static int em28xx_hint_sensor(struct em28xx *dev) +{ + int rc; + char *sensor_name; + unsigned char cmd; + __be16 version_be; + u16 version; + + if (dev->model != EM2820_BOARD_UNKNOWN) + return 0; + + dev->i2c_client.addr = 0xba >> 1; + cmd = 0; + i2c_master_send(&dev->i2c_client, &cmd, 1); + rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2); + if (rc != 2) + return -EINVAL; + + version = be16_to_cpu(version_be); + + switch (version) { + case MT9V011_VERSION: + dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; + sensor_name = "mt9v011"; + break; + default: + printk("Unknown Sensor 0x%04x\n", be16_to_cpu(version)); + return -EINVAL; + } + + em28xx_errdev("Sensor is %s, assuming that webcam is %s\n", + sensor_name, em28xx_boards[dev->model].name); + + return 0; +} + /* Since em28xx_pre_card_setup() requires a proper dev->model, * this won't work for boards with generic PCI IDs */ @@ -1660,7 +1772,10 @@ void em28xx_pre_card_setup(struct em28xx *dev) em28xx_info("chip ID is em2750\n"); break; case CHIP_ID_EM2820: - em28xx_info("chip ID is em2820\n"); + if (dev->board.is_27xx) + em28xx_info("chip is em2710\n"); + else + em28xx_info("chip ID is em2820\n"); break; case CHIP_ID_EM2840: em28xx_info("chip ID is em2840\n"); @@ -1834,6 +1949,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) ctl->demod = XC3028_FE_CHINA; ctl->fname = XC2028_DEFAULT_FIRMWARE; break; + case EM2882_BOARD_EVGA_INDTUBE: + ctl->demod = XC3028_FE_CHINA; + ctl->fname = XC3028L_DEFAULT_FIRMWARE; + break; default: ctl->demod = XC3028_FE_OREN538; } @@ -2101,7 +2220,17 @@ void em28xx_card_setup(struct em28xx *dev) case EM2880_BOARD_MSI_DIGIVOX_AD: if (!em28xx_hint_board(dev)) em28xx_set_model(dev); + + /* In cases where we had to use a board hint, the call to + em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, + so make the call now so the analog GPIOs are set properly + before probing the i2c bus. */ + em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; + case EM2820_BOARD_SILVERCREST_WEBCAM: + /* FIXME: need to document the registers bellow */ + em28xx_write_reg(dev, 0x0d, 0x42); + em28xx_write_reg(dev, 0x13, 0x08); } if (dev->board.has_snapshot_button) @@ -2133,6 +2262,10 @@ void em28xx_card_setup(struct em28xx *dev) v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvp5150", "tvp5150", tvp5150_addrs); + if (dev->board.decoder == EM28XX_MT9V011) + v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "mt9v011", "mt9v011", mt9v011_addrs); + if (dev->board.adecoder == EM28XX_TVAUDIO) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvaudio", "tvaudio", dev->board.tvaudio_addr); @@ -2277,6 +2410,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return errCode; } + em28xx_hint_sensor(dev); + /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); @@ -2517,6 +2652,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, retval = em28xx_init_dev(&dev, udev, interface, nr); if (retval) { em28xx_devused &= ~(1<<dev->devno); + mutex_unlock(&dev->lock); kfree(dev); goto err; } diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index c8d7ce8fbd36..079ab4d563a6 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -648,17 +648,28 @@ int em28xx_capture_start(struct em28xx *dev, int start) int em28xx_set_outfmt(struct em28xx *dev) { int ret; + int vinmode, vinctl, outfmt; + + outfmt = dev->format->reg; + + if (dev->board.is_27xx) { + vinmode = 0x0d; + vinctl = 0x00; + } else { + vinmode = 0x10; + vinctl = 0x11; + } ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT, - dev->format->reg | 0x20, 0x3f); + outfmt | 0x20, 0xff); if (ret < 0) - return ret; + return ret; - ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10); + ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, vinmode); if (ret < 0) return ret; - return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11); + return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctl); } static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax, @@ -695,13 +706,19 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v) { u8 mode; /* the em2800 scaler only supports scaling down to 50% */ - if (dev->board.is_em2800) + + if (dev->board.is_27xx) { + /* FIXME: Don't use the scaler yet */ + mode = 0; + } else if (dev->board.is_em2800) { mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00); - else { + } else { u8 buf[2]; + buf[0] = h; buf[1] = h >> 8; em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2); + buf[0] = v; buf[1] = v >> 8; em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2); @@ -720,8 +737,11 @@ int em28xx_resolution_set(struct em28xx *dev) height = norm_maxh(dev) >> 1; em28xx_set_outfmt(dev); + + em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2); em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2); + return em28xx_scaler_set(dev, dev->hscale, dev->vscale); } diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 563dd2b1c8e9..3da97c32b8fa 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -243,6 +243,14 @@ static struct s5h1409_config em28xx_s5h1409_with_xc3028 = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK }; +static struct zl10353_config em28xx_terratec_xs_zl10353_xc3028 = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .disable_i2c_gate_ctrl = 1, + .parallel_ts = 1, + .if2 = 45600, +}; + #ifdef EM28XX_DRX397XD_SUPPORT /* [TODO] djh - not sure yet what the device config needs to contain */ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = { @@ -433,7 +441,6 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: - case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_KWORLD_DVB_310U: case EM2880_BOARD_EMPIRE_DUAL_TV: dvb->frontend = dvb_attach(zl10353_attach, @@ -444,7 +451,27 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2880_BOARD_TERRATEC_HYBRID_XS: + dvb->frontend = dvb_attach(zl10353_attach, + &em28xx_terratec_xs_zl10353_xc3028, + &dev->i2c_adap); + if (dvb->frontend == NULL) { + /* This board could have either a zl10353 or a mt352. + If the chip id isn't for zl10353, try mt352 */ + + /* FIXME: make support for mt352 work */ + printk(KERN_ERR "version of this board with mt352 not " + "currently supported\n"); + result = -EINVAL; + goto out_free; + } + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; case EM2883_BOARD_KWORLD_HYBRID_330U: + case EM2882_BOARD_EVGA_INDTUBE: dvb->frontend = dvb_attach(s5h1409_attach, &em28xx_s5h1409_with_xc3028, &dev->i2c_adap); diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 2c86fcf089f5..27e33a287dfc 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -483,7 +483,7 @@ static char *i2c_devs[128] = { [0xa0 >> 1] = "eeprom", [0xb0 >> 1] = "tda9874", [0xb8 >> 1] = "tvp5150a", - [0xba >> 1] = "tvp5150a", + [0xba >> 1] = "webcam sensor or tvp5150a", [0xc0 >> 1] = "tuner (analog)", [0xc2 >> 1] = "tuner (analog)", [0xc4 >> 1] = "tuner (analog)", diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 882796e84dbc..14316c912179 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -90,10 +90,35 @@ MODULE_PARM_DESC(video_debug, "enable debug messages [video]"); /* supported video standards */ static struct em28xx_fmt format[] = { { - .name = "16bpp YUY2, 4:2:2, packed", + .name = "16 bpp YUY2, 4:2:2, packed", .fourcc = V4L2_PIX_FMT_YUYV, .depth = 16, .reg = EM28XX_OUTFMT_YUV422_Y0UY1V, + }, { + .name = "16 bpp RGB 565, LE", + .fourcc = V4L2_PIX_FMT_RGB565, + .depth = 16, + .reg = EM28XX_OUTFMT_RGB_16_656, + }, { + .name = "8 bpp Bayer BGBG..GRGR", + .fourcc = V4L2_PIX_FMT_SBGGR8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_BGBG, + }, { + .name = "8 bpp Bayer GRGR..BGBG", + .fourcc = V4L2_PIX_FMT_SGRBG8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_GRGR, + }, { + .name = "8 bpp Bayer GBGB..RGRG", + .fourcc = V4L2_PIX_FMT_SGBRG8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_GBGB, + }, { + .name = "12 bpp YUV411", + .fourcc = V4L2_PIX_FMT_YUV411P, + .depth = 12, + .reg = EM28XX_OUTFMT_YUV411, }, }; @@ -687,8 +712,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; - int width = f->fmt.pix.width; - int height = f->fmt.pix.height; + unsigned int width = f->fmt.pix.width; + unsigned int height = f->fmt.pix.height; unsigned int maxw = norm_maxw(dev); unsigned int maxh = norm_maxh(dev); unsigned int hscale, vscale; @@ -701,34 +726,24 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return -EINVAL; } - /* width must even because of the YUYV format - height must be even because of interlacing */ - height &= 0xfffe; - width &= 0xfffe; - - if (unlikely(height < 32)) - height = 32; - if (unlikely(height > maxh)) - height = maxh; - if (unlikely(width < 48)) - width = 48; - if (unlikely(width > maxw)) - width = maxw; - - if (dev->board.is_em2800) { + if (dev->board.is_27xx) { + /* FIXME: This is the only supported fmt */ + width = 640; + height = 480; + } else if (dev->board.is_em2800) { /* the em2800 can only scale down to 50% */ - if (height % (maxh / 2)) - height = maxh; - if (width % (maxw / 2)) - width = maxw; - /* according to empiatech support */ - /* the MaxPacketSize is to small to support */ - /* framesizes larger than 640x480 @ 30 fps */ - /* or 640x576 @ 25 fps. As this would cut */ - /* of a part of the image we prefer */ - /* 360x576 or 360x480 for now */ + height = height > (3 * maxh / 4) ? maxh : maxh / 2; + width = width > (3 * maxw / 4) ? maxw : maxw / 2; + /* According to empiatech support the MaxPacketSize is too small + * to support framesizes larger than 640x480 @ 30 fps or 640x576 + * @ 25 fps. As this would cut of a part of the image we prefer + * 360x576 or 360x480 for now */ if (width == maxw && height == maxh) width /= 2; + } else { + /* width must even because of the YUYV format + height must be even because of interlacing */ + v4l_bound_align_image(&width, 48, maxw, 1, &height, 32, maxh, 1, 0); } get_scale(dev, width, height, &hscale, &vscale); @@ -747,13 +762,40 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return 0; } +static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc, + unsigned width, unsigned height) +{ + struct em28xx_fmt *fmt; + + /* FIXME: This is the only supported fmt */ + if (dev->board.is_27xx) { + width = 640; + height = 480; + } + + fmt = format_by_fourcc(fourcc); + if (!fmt) + return -EINVAL; + + dev->format = fmt; + dev->width = width; + dev->height = height; + + /* set new image size */ + get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale); + + em28xx_set_alternate(dev); + em28xx_resolution_set(dev); + + return 0; +} + static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; int rc; - struct em28xx_fmt *fmt; rc = check_dev(dev); if (rc < 0) @@ -763,12 +805,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, vidioc_try_fmt_vid_cap(file, priv, f); - fmt = format_by_fourcc(f->fmt.pix.pixelformat); - if (!fmt) { - rc = -EINVAL; - goto out; - } - if (videobuf_queue_is_busy(&fh->vb_vidq)) { em28xx_errdev("%s queue busy\n", __func__); rc = -EBUSY; @@ -781,16 +817,8 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, goto out; } - /* set new image size */ - dev->width = f->fmt.pix.width; - dev->height = f->fmt.pix.height; - dev->format = fmt; - get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale); - - em28xx_set_alternate(dev); - em28xx_resolution_set(dev); - - rc = 0; + rc = em28xx_set_video_format(dev, f->fmt.pix.pixelformat, + f->fmt.pix.width, f->fmt.pix.height); out: mutex_unlock(&dev->lock); @@ -1630,11 +1658,6 @@ static int em28xx_v4l2_open(struct file *filp) filp->private_data = fh; if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) { - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); - dev->hscale = 0; - dev->vscale = 0; - em28xx_set_mode(dev, EM28XX_ANALOG_MODE); em28xx_set_alternate(dev); em28xx_resolution_set(dev); @@ -1976,15 +1999,14 @@ int em28xx_register_analog_devices(struct em28xx *dev) /* set default norm */ dev->norm = em28xx_video_template.current_norm; - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); dev->interlaced = EM28XX_INTERLACED_DEFAULT; - dev->hscale = 0; - dev->vscale = 0; dev->ctl_input = 0; /* Analog specific initialization */ dev->format = &format[0]; + em28xx_set_video_format(dev, format[0].fourcc, + norm_maxw(dev), norm_maxh(dev)); + video_mux(dev, dev->ctl_input); /* Audio defaults */ diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 8bf81be1da61..d90fef463764 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -106,6 +106,8 @@ #define EM2860_BOARD_TERRATEC_GRABBY 67 #define EM2860_BOARD_TERRATEC_AV350 68 #define EM2882_BOARD_KWORLD_ATSC_315U 69 +#define EM2882_BOARD_EVGA_INDTUBE 70 +#define EM2820_BOARD_SILVERCREST_WEBCAM 71 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 @@ -359,6 +361,7 @@ enum em28xx_decoder { EM28XX_NODECODER, EM28XX_TVP5150, EM28XX_SAA711X, + EM28XX_MT9V011, }; enum em28xx_adecoder { @@ -387,6 +390,7 @@ struct em28xx_board { unsigned int max_range_640_480:1; unsigned int has_dvb:1; unsigned int has_snapshot_button:1; + unsigned int is_27xx:1; unsigned int valid:1; unsigned char xclk, i2c_speed; diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index f7e0355ad644..1e89600986c8 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1042,13 +1042,11 @@ static int vidioc_queryctrl(struct file *file, void *priv, for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) { if (gspca_dev->ctrl_dis & (1 << i)) continue; - if (ctrls->qctrl.id < id) + if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id) continue; - if (ctrls != NULL) { - if (gspca_dev->sd_desc->ctrls[i].qctrl.id + if (ctrls && gspca_dev->sd_desc->ctrls[i].qctrl.id > ctrls->qctrl.id) - continue; - } + continue; ctrls = &gspca_dev->sd_desc->ctrls[i]; } } else { diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 188866ac6cef..2f6e135d94bc 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -50,12 +50,18 @@ static int i2c_detect_tries = 10; struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ + __u8 packet_nr; + char bridge; #define BRIDGE_OV511 0 #define BRIDGE_OV511PLUS 1 #define BRIDGE_OV518 2 #define BRIDGE_OV518PLUS 3 #define BRIDGE_OV519 4 +#define BRIDGE_MASK 7 + + char invert_led; +#define BRIDGE_INVERT_LED 8 /* Determined by sensor type */ __u8 sif; @@ -65,22 +71,25 @@ struct sd { __u8 colors; __u8 hflip; __u8 vflip; + __u8 autobrightness; + __u8 freq; __u8 stopped; /* Streaming is temporarily paused */ - __u8 frame_rate; /* current Framerate (OV519 only) */ - __u8 clockdiv; /* clockdiv override for OV519 only */ + __u8 frame_rate; /* current Framerate */ + __u8 clockdiv; /* clockdiv override */ char sensor; /* Type of image sensor chip (SEN_*) */ #define SEN_UNKNOWN 0 #define SEN_OV6620 1 #define SEN_OV6630 2 -#define SEN_OV7610 3 -#define SEN_OV7620 4 -#define SEN_OV7640 5 -#define SEN_OV7670 6 -#define SEN_OV76BE 7 -#define SEN_OV8610 8 +#define SEN_OV66308AF 3 +#define SEN_OV7610 4 +#define SEN_OV7620 5 +#define SEN_OV7640 6 +#define SEN_OV7670 7 +#define SEN_OV76BE 8 +#define SEN_OV8610 9 }; /* V4L2 controls supported by the driver */ @@ -94,11 +103,17 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setautobrightness(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getautobrightness(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val); static void setbrightness(struct gspca_dev *gspca_dev); static void setcontrast(struct gspca_dev *gspca_dev); static void setcolors(struct gspca_dev *gspca_dev); +static void setautobrightness(struct sd *sd); +static void setfreq(struct sd *sd); -static struct ctrl sd_ctrls[] = { +static const struct ctrl sd_ctrls[] = { { { .id = V4L2_CID_BRIGHTNESS, @@ -141,7 +156,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcolors, .get = sd_getcolors, }, -/* next controls work with ov7670 only */ +/* The flip controls work with ov7670 only */ #define HFLIP_IDX 3 { { @@ -172,6 +187,51 @@ static struct ctrl sd_ctrls[] = { .set = sd_setvflip, .get = sd_getvflip, }, +#define AUTOBRIGHT_IDX 5 + { + { + .id = V4L2_CID_AUTOBRIGHTNESS, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Brightness", + .minimum = 0, + .maximum = 1, + .step = 1, +#define AUTOBRIGHT_DEF 1 + .default_value = AUTOBRIGHT_DEF, + }, + .set = sd_setautobrightness, + .get = sd_getautobrightness, + }, +#define FREQ_IDX 6 + { + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Light frequency filter", + .minimum = 0, + .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */ + .step = 1, +#define FREQ_DEF 0 + .default_value = FREQ_DEF, + }, + .set = sd_setfreq, + .get = sd_getfreq, + }, +#define OV7670_FREQ_IDX 7 + { + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Light frequency filter", + .minimum = 0, + .maximum = 3, /* 0: 0, 1: 50Hz, 2:60Hz 3: Auto Hz */ + .step = 1, +#define OV7670_FREQ_DEF 3 + .default_value = OV7670_FREQ_DEF, + }, + .set = sd_setfreq, + .get = sd_getfreq, + }, }; static const struct v4l2_pix_format ov519_vga_mode[] = { @@ -187,11 +247,21 @@ static const struct v4l2_pix_format ov519_vga_mode[] = { .priv = 0}, }; static const struct v4l2_pix_format ov519_sif_mode[] = { + {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120 * 3 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 3}, {176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 176, .sizeimage = 176 * 144 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 1}, + {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2}, {352, 288, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 352, .sizeimage = 352 * 288 * 3 / 8 + 590, @@ -199,42 +269,118 @@ static const struct v4l2_pix_format ov519_sif_mode[] = { .priv = 0}, }; +/* Note some of the sizeimage values for the ov511 / ov518 may seem + larger then necessary, however they need to be this big as the ov511 / + ov518 always fills the entire isoc frame, using 0 padding bytes when + it doesn't have any data. So with low framerates the amount of data + transfered can become quite large (libv4l will remove all the 0 padding + in userspace). */ static const struct v4l2_pix_format ov518_vga_mode[] = { {320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, .bytesperline = 320, - .sizeimage = 320 * 240 * 3 / 8 + 590, + .sizeimage = 320 * 240 * 3, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 1}, {640, 480, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, .bytesperline = 640, - .sizeimage = 640 * 480 * 3 / 8 + 590, + .sizeimage = 640 * 480 * 2, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, }; static const struct v4l2_pix_format ov518_sif_mode[] = { + {160, 120, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 70000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 3}, {176, 144, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, .bytesperline = 176, - .sizeimage = 40000, + .sizeimage = 70000, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 1}, + {320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2}, {352, 288, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, .bytesperline = 352, - .sizeimage = 352 * 288 * 3 / 8 + 590, + .sizeimage = 352 * 288 * 3, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, }; +static const struct v4l2_pix_format ov511_vga_mode[] = { + {320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {640, 480, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480 * 2, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; +static const struct v4l2_pix_format ov511_sif_mode[] = { + {160, 120, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 70000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 3}, + {176, 144, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 176, + .sizeimage = 70000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2}, + {352, 288, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 352, + .sizeimage = 352 * 288 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; /* Registers common to OV511 / OV518 */ +#define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */ #define R51x_SYS_RESET 0x50 + /* Reset type flags */ + #define OV511_RESET_OMNICE 0x08 #define R51x_SYS_INIT 0x53 #define R51x_SYS_SNAP 0x52 #define R51x_SYS_CUST_ID 0x5F #define R51x_COMP_LUT_BEGIN 0x80 /* OV511 Camera interface register numbers */ +#define R511_CAM_DELAY 0x10 +#define R511_CAM_EDGE 0x11 +#define R511_CAM_PXCNT 0x12 +#define R511_CAM_LNCNT 0x13 +#define R511_CAM_PXDIV 0x14 +#define R511_CAM_LNDIV 0x15 +#define R511_CAM_UV_EN 0x16 +#define R511_CAM_LINE_MODE 0x17 +#define R511_CAM_OPTS 0x18 + +#define R511_SNAP_FRAME 0x19 +#define R511_SNAP_PXCNT 0x1A +#define R511_SNAP_LNCNT 0x1B +#define R511_SNAP_PXDIV 0x1C +#define R511_SNAP_LNDIV 0x1D +#define R511_SNAP_UV_EN 0x1E +#define R511_SNAP_UV_EN 0x1E +#define R511_SNAP_OPTS 0x1F + +#define R511_DRAM_FLOW_CTL 0x20 +#define R511_FIFO_OPTS 0x31 +#define R511_I2C_CTL 0x40 #define R511_SYS_LED_CTL 0x55 /* OV511+ only */ -#define OV511_RESET_NOREGS 0x3F /* All but OV511 & regs */ +#define R511_COMP_EN 0x78 +#define R511_COMP_LUT_EN 0x79 /* OV518 Camera interface register numbers */ #define R518_GPIO_OUT 0x56 /* OV518(+) only */ @@ -383,7 +529,7 @@ static const struct ov_i2c_regvals norm_6x20[] = { { 0x28, 0x05 }, { 0x2a, 0x04 }, /* Disable framerate adjust */ /* { 0x2b, 0xac }, * Framerate; Set 2a[7] first */ - { 0x2d, 0x99 }, + { 0x2d, 0x85 }, { 0x33, 0xa0 }, /* Color Processing Parameter */ { 0x34, 0xd2 }, /* Max A/D range */ { 0x38, 0x8b }, @@ -416,7 +562,7 @@ static const struct ov_i2c_regvals norm_6x30[] = { { 0x07, 0x2d }, /* Sharpness */ { 0x0c, 0x20 }, { 0x0d, 0x20 }, - { 0x0e, 0x20 }, + { 0x0e, 0xa0 }, /* Was 0x20, bit7 enables a 2x gain which we need */ { 0x0f, 0x05 }, { 0x10, 0x9a }, { 0x11, 0x00 }, /* Pixel clock = fastest */ @@ -558,7 +704,7 @@ static const struct ov_i2c_regvals norm_7620[] = { { 0x23, 0x00 }, { 0x26, 0xa2 }, { 0x27, 0xea }, - { 0x28, 0x20 }, + { 0x28, 0x22 }, /* Was 0x20, bit1 enables a 2x gain which we need */ { 0x29, 0x00 }, { 0x2a, 0x10 }, { 0x2b, 0x00 }, @@ -999,13 +1145,128 @@ static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n) return ret; } +static int ov511_i2c_w(struct sd *sd, __u8 reg, __u8 value) +{ + int rc, retries; + + PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg); + + /* Three byte write cycle */ + for (retries = 6; ; ) { + /* Select camera register */ + rc = reg_w(sd, R51x_I2C_SADDR_3, reg); + if (rc < 0) + return rc; + + /* Write "value" to I2C data port of OV511 */ + rc = reg_w(sd, R51x_I2C_DATA, value); + if (rc < 0) + return rc; + + /* Initiate 3-byte write cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x01); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; + if (--retries < 0) { + PDEBUG(D_USBO, "i2c write retries exhausted"); + return -1; + } + } + + return 0; +} + +static int ov511_i2c_r(struct sd *sd, __u8 reg) +{ + int rc, value, retries; + + /* Two byte write cycle */ + for (retries = 6; ; ) { + /* Select camera register */ + rc = reg_w(sd, R51x_I2C_SADDR_2, reg); + if (rc < 0) + return rc; + + /* Initiate 2-byte write cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x03); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; + + /* I2C abort */ + reg_w(sd, R511_I2C_CTL, 0x10); + + if (--retries < 0) { + PDEBUG(D_USBI, "i2c write retries exhausted"); + return -1; + } + } + + /* Two byte read cycle */ + for (retries = 6; ; ) { + /* Initiate 2-byte read cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; + + /* I2C abort */ + rc = reg_w(sd, R511_I2C_CTL, 0x10); + if (rc < 0) + return rc; + + if (--retries < 0) { + PDEBUG(D_USBI, "i2c read retries exhausted"); + return -1; + } + } + + value = reg_r(sd, R51x_I2C_DATA); + + PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value); + + /* This is needed to make i2c_w() work */ + rc = reg_w(sd, R511_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + return value; +} /* * The OV518 I2C I/O procedure is different, hence, this function. * This is normally only called from i2c_w(). Note that this function * always succeeds regardless of whether the sensor is present and working. */ -static int i2c_w(struct sd *sd, +static int ov518_i2c_w(struct sd *sd, __u8 reg, __u8 value) { @@ -1040,7 +1301,7 @@ static int i2c_w(struct sd *sd, * This is normally only called from i2c_r(). Note that this function * always succeeds regardless of whether the sensor is present and working. */ -static int i2c_r(struct sd *sd, __u8 reg) +static int ov518_i2c_r(struct sd *sd, __u8 reg) { int rc, value; @@ -1063,6 +1324,34 @@ static int i2c_r(struct sd *sd, __u8 reg) return value; } +static int i2c_w(struct sd *sd, __u8 reg, __u8 value) +{ + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + return ov511_i2c_w(sd, reg, value); + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + case BRIDGE_OV519: + return ov518_i2c_w(sd, reg, value); + } + return -1; /* Should never happen */ +} + +static int i2c_r(struct sd *sd, __u8 reg) +{ + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + return ov511_i2c_r(sd, reg); + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + case BRIDGE_OV519: + return ov518_i2c_r(sd, reg); + } + return -1; /* Should never happen */ +} + /* Writes bits at positions specified by mask to an I2C reg. Bits that are in * the same position as 1's in "mask" are cleared and set to "value". Bits * that are in the same position as 0's in "mask" are preserved, regardless @@ -1242,7 +1531,6 @@ static int ov8xx0_configure(struct sd *sd) } /* Set sensor-specific vars */ -/* sd->sif = 0; already done */ return 0; } @@ -1279,15 +1567,13 @@ static int ov7xx0_configure(struct sd *sd) } } else if ((rc & 3) == 1) { /* I don't know what's different about the 76BE yet. */ - if (i2c_r(sd, 0x15) & 1) + if (i2c_r(sd, 0x15) & 1) { PDEBUG(D_PROBE, "Sensor is an OV7620AE"); - else + sd->sensor = SEN_OV7620; + } else { PDEBUG(D_PROBE, "Sensor is an OV76BE"); - - /* OV511+ will return all zero isoc data unless we - * configure the sensor as a 7620. Someone needs to - * find the exact reg. setting that causes this. */ - sd->sensor = SEN_OV76BE; + sd->sensor = SEN_OV76BE; + } } else if ((rc & 3) == 0) { /* try to read product id registers */ high = i2c_r(sd, 0x0a); @@ -1333,7 +1619,6 @@ static int ov7xx0_configure(struct sd *sd) } /* Set sensor-specific vars */ -/* sd->sif = 0; already done */ return 0; } @@ -1362,13 +1647,14 @@ static int ov6xx0_configure(struct sd *sd) break; case 0x01: sd->sensor = SEN_OV6620; + PDEBUG(D_PROBE, "Sensor is an OV6620"); break; case 0x02: sd->sensor = SEN_OV6630; PDEBUG(D_PROBE, "Sensor is an OV66308AE"); break; case 0x03: - sd->sensor = SEN_OV6630; + sd->sensor = SEN_OV66308AF; PDEBUG(D_PROBE, "Sensor is an OV66308AF"); break; case 0x90: @@ -1391,6 +1677,9 @@ static int ov6xx0_configure(struct sd *sd) /* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */ static void ov51x_led_control(struct sd *sd, int on) { + if (sd->invert_led) + on = !on; + switch (sd->bridge) { /* OV511 has no LED control */ case BRIDGE_OV511PLUS: @@ -1406,9 +1695,31 @@ static void ov51x_led_control(struct sd *sd, int on) } } -/* OV518 quantization tables are 8x4 (instead of 8x8) */ -static int ov518_upload_quan_tables(struct sd *sd) +static int ov51x_upload_quan_tables(struct sd *sd) { + const unsigned char yQuanTable511[] = { + 0, 1, 1, 2, 2, 3, 3, 4, + 1, 1, 1, 2, 2, 3, 4, 4, + 1, 1, 2, 2, 3, 4, 4, 4, + 2, 2, 2, 3, 4, 4, 4, 4, + 2, 2, 3, 4, 4, 5, 5, 5, + 3, 3, 4, 4, 5, 5, 5, 5, + 3, 4, 4, 4, 5, 5, 5, 5, + 4, 4, 4, 4, 5, 5, 5, 5 + }; + + const unsigned char uvQuanTable511[] = { + 0, 2, 2, 3, 4, 4, 4, 4, + 2, 2, 2, 4, 4, 4, 4, 4, + 2, 2, 3, 4, 4, 4, 4, 4, + 3, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4 + }; + + /* OV518 quantization tables are 8x4 (instead of 8x8) */ const unsigned char yQuanTable518[] = { 5, 4, 5, 6, 6, 7, 7, 7, 5, 5, 5, 5, 6, 7, 7, 7, @@ -1423,14 +1734,23 @@ static int ov518_upload_quan_tables(struct sd *sd) 7, 7, 7, 7, 7, 7, 8, 8 }; - const unsigned char *pYTable = yQuanTable518; - const unsigned char *pUVTable = uvQuanTable518; + const unsigned char *pYTable, *pUVTable; unsigned char val0, val1; - int i, rc, reg = R51x_COMP_LUT_BEGIN; + int i, size, rc, reg = R51x_COMP_LUT_BEGIN; PDEBUG(D_PROBE, "Uploading quantization tables"); - for (i = 0; i < 16; i++) { + if (sd->bridge == BRIDGE_OV511 || sd->bridge == BRIDGE_OV511PLUS) { + pYTable = yQuanTable511; + pUVTable = uvQuanTable511; + size = 32; + } else { + pYTable = yQuanTable518; + pUVTable = uvQuanTable518; + size = 16; + } + + for (i = 0; i < size; i++) { val0 = *pYTable++; val1 = *pYTable++; val0 &= 0x0f; @@ -1445,7 +1765,7 @@ static int ov518_upload_quan_tables(struct sd *sd) val0 &= 0x0f; val1 &= 0x0f; val0 |= val1 << 4; - rc = reg_w(sd, reg + 16, val0); + rc = reg_w(sd, reg + size, val0); if (rc < 0) return rc; @@ -1455,6 +1775,87 @@ static int ov518_upload_quan_tables(struct sd *sd) return 0; } +/* This initializes the OV511/OV511+ and the sensor */ +static int ov511_configure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int rc; + + /* For 511 and 511+ */ + const struct ov_regvals init_511[] = { + { R51x_SYS_RESET, 0x7f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x7f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x3f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x3d }, + }; + + const struct ov_regvals norm_511[] = { + { R511_DRAM_FLOW_CTL, 0x01 }, + { R51x_SYS_SNAP, 0x00 }, + { R51x_SYS_SNAP, 0x02 }, + { R51x_SYS_SNAP, 0x00 }, + { R511_FIFO_OPTS, 0x1f }, + { R511_COMP_EN, 0x00 }, + { R511_COMP_LUT_EN, 0x03 }, + }; + + const struct ov_regvals norm_511_p[] = { + { R511_DRAM_FLOW_CTL, 0xff }, + { R51x_SYS_SNAP, 0x00 }, + { R51x_SYS_SNAP, 0x02 }, + { R51x_SYS_SNAP, 0x00 }, + { R511_FIFO_OPTS, 0xff }, + { R511_COMP_EN, 0x00 }, + { R511_COMP_LUT_EN, 0x03 }, + }; + + const struct ov_regvals compress_511[] = { + { 0x70, 0x1f }, + { 0x71, 0x05 }, + { 0x72, 0x06 }, + { 0x73, 0x06 }, + { 0x74, 0x14 }, + { 0x75, 0x03 }, + { 0x76, 0x04 }, + { 0x77, 0x04 }, + }; + + PDEBUG(D_PROBE, "Device custom id %x", reg_r(sd, R51x_SYS_CUST_ID)); + + rc = write_regvals(sd, init_511, ARRAY_SIZE(init_511)); + if (rc < 0) + return rc; + + switch (sd->bridge) { + case BRIDGE_OV511: + rc = write_regvals(sd, norm_511, ARRAY_SIZE(norm_511)); + if (rc < 0) + return rc; + break; + case BRIDGE_OV511PLUS: + rc = write_regvals(sd, norm_511_p, ARRAY_SIZE(norm_511_p)); + if (rc < 0) + return rc; + break; + } + + /* Init compression */ + rc = write_regvals(sd, compress_511, ARRAY_SIZE(compress_511)); + if (rc < 0) + return rc; + + rc = ov51x_upload_quan_tables(sd); + if (rc < 0) { + PDEBUG(D_ERR, "Error uploading quantization tables"); + return rc; + } + + return 0; +} + /* This initializes the OV518/OV518+ and the sensor */ static int ov518_configure(struct gspca_dev *gspca_dev) { @@ -1462,7 +1863,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev) int rc; /* For 518 and 518+ */ - static struct ov_regvals init_518[] = { + const struct ov_regvals init_518[] = { { R51x_SYS_RESET, 0x40 }, { R51x_SYS_INIT, 0xe1 }, { R51x_SYS_RESET, 0x3e }, @@ -1473,7 +1874,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev) { 0x5d, 0x03 }, }; - static struct ov_regvals norm_518[] = { + const struct ov_regvals norm_518[] = { { R51x_SYS_SNAP, 0x02 }, /* Reset */ { R51x_SYS_SNAP, 0x01 }, /* Enable */ { 0x31, 0x0f }, @@ -1486,7 +1887,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev) { 0x2f, 0x80 }, }; - static struct ov_regvals norm_518_p[] = { + const struct ov_regvals norm_518_p[] = { { R51x_SYS_SNAP, 0x02 }, /* Reset */ { R51x_SYS_SNAP, 0x01 }, /* Enable */ { 0x31, 0x0f }, @@ -1531,7 +1932,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev) break; } - rc = ov518_upload_quan_tables(sd); + rc = ov51x_upload_quan_tables(sd); if (rc < 0) { PDEBUG(D_ERR, "Error uploading quantization tables"); return rc; @@ -1573,9 +1974,14 @@ static int sd_config(struct gspca_dev *gspca_dev, struct cam *cam; int ret = 0; - sd->bridge = id->driver_info; + sd->bridge = id->driver_info & BRIDGE_MASK; + sd->invert_led = id->driver_info & BRIDGE_INVERT_LED; switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + ret = ov511_configure(gspca_dev); + break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: ret = ov518_configure(gspca_dev); @@ -1634,6 +2040,16 @@ static int sd_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + if (!sd->sif) { + cam->cam_mode = ov511_vga_mode; + cam->nmodes = ARRAY_SIZE(ov511_vga_mode); + } else { + cam->cam_mode = ov511_sif_mode; + cam->nmodes = ARRAY_SIZE(ov511_sif_mode); + } + break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: if (!sd->sif) { @@ -1655,13 +2071,28 @@ static int sd_config(struct gspca_dev *gspca_dev, break; } sd->brightness = BRIGHTNESS_DEF; - sd->contrast = CONTRAST_DEF; + if (sd->sensor == SEN_OV6630 || sd->sensor == SEN_OV66308AF) + sd->contrast = 200; /* The default is too low for the ov6630 */ + else + sd->contrast = CONTRAST_DEF; sd->colors = COLOR_DEF; sd->hflip = HFLIP_DEF; sd->vflip = VFLIP_DEF; - if (sd->sensor != SEN_OV7670) - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) - | (1 << VFLIP_IDX); + sd->autobrightness = AUTOBRIGHT_DEF; + if (sd->sensor == SEN_OV7670) { + sd->freq = OV7670_FREQ_DEF; + gspca_dev->ctrl_dis = 1 << FREQ_IDX; + } else { + sd->freq = FREQ_DEF; + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | + (1 << OV7670_FREQ_IDX); + } + if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670) + gspca_dev->ctrl_dis |= 1 << AUTOBRIGHT_IDX; + /* OV8610 Frequency filter control should work but needs testing */ + if (sd->sensor == SEN_OV8610) + gspca_dev->ctrl_dis |= 1 << FREQ_IDX; + return 0; error: PDEBUG(D_ERR, "OV519 Config failed"); @@ -1680,6 +2111,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return -EIO; break; case SEN_OV6630: + case SEN_OV66308AF: if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30))) return -EIO; break; @@ -1688,6 +2120,8 @@ static int sd_init(struct gspca_dev *gspca_dev) /* case SEN_OV76BE: */ if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610))) return -EIO; + if (i2c_w_mask(sd, 0x0e, 0x00, 0x40)) + return -EIO; break; case SEN_OV7620: if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620))) @@ -1709,6 +2143,126 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } +/* Set up the OV511/OV511+ with the given image parameters. + * + * Do not put any sensor-specific code in here (including I2C I/O functions) + */ +static int ov511_mode_init_regs(struct sd *sd) +{ + int hsegs, vsegs, packet_size, fps, needed; + int interlaced = 0; + struct usb_host_interface *alt; + struct usb_interface *intf; + + intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); + alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); + if (!alt) { + PDEBUG(D_ERR, "Couldn't get altsetting"); + return -EIO; + } + + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); + reg_w(sd, R51x_FIFO_PSIZE, packet_size >> 5); + + reg_w(sd, R511_CAM_UV_EN, 0x01); + reg_w(sd, R511_SNAP_UV_EN, 0x01); + reg_w(sd, R511_SNAP_OPTS, 0x03); + + /* Here I'm assuming that snapshot size == image size. + * I hope that's always true. --claudio + */ + hsegs = (sd->gspca_dev.width >> 3) - 1; + vsegs = (sd->gspca_dev.height >> 3) - 1; + + reg_w(sd, R511_CAM_PXCNT, hsegs); + reg_w(sd, R511_CAM_LNCNT, vsegs); + reg_w(sd, R511_CAM_PXDIV, 0x00); + reg_w(sd, R511_CAM_LNDIV, 0x00); + + /* YUV420, low pass filter on */ + reg_w(sd, R511_CAM_OPTS, 0x03); + + /* Snapshot additions */ + reg_w(sd, R511_SNAP_PXCNT, hsegs); + reg_w(sd, R511_SNAP_LNCNT, vsegs); + reg_w(sd, R511_SNAP_PXDIV, 0x00); + reg_w(sd, R511_SNAP_LNDIV, 0x00); + + /******** Set the framerate ********/ + if (frame_rate > 0) + sd->frame_rate = frame_rate; + + switch (sd->sensor) { + case SEN_OV6620: + /* No framerate control, doesn't like higher rates yet */ + sd->clockdiv = 3; + break; + + /* Note once the FIXME's in mode_init_ov_sensor_regs() are fixed + for more sensors we need to do this for them too */ + case SEN_OV7620: + case SEN_OV7640: + case SEN_OV76BE: + if (sd->gspca_dev.width == 320) + interlaced = 1; + /* Fall through */ + case SEN_OV6630: + case SEN_OV7610: + case SEN_OV7670: + switch (sd->frame_rate) { + case 30: + case 25: + /* Not enough bandwidth to do 640x480 @ 30 fps */ + if (sd->gspca_dev.width != 640) { + sd->clockdiv = 0; + break; + } + /* Fall through for 640x480 case */ + default: +/* case 20: */ +/* case 15: */ + sd->clockdiv = 1; + break; + case 10: + sd->clockdiv = 2; + break; + case 5: + sd->clockdiv = 5; + break; + } + if (interlaced) { + sd->clockdiv = (sd->clockdiv + 1) * 2 - 1; + /* Higher then 10 does not work */ + if (sd->clockdiv > 10) + sd->clockdiv = 10; + } + break; + + case SEN_OV8610: + /* No framerate control ?? */ + sd->clockdiv = 0; + break; + } + + /* Check if we have enough bandwidth to disable compression */ + fps = (interlaced ? 60 : 30) / (sd->clockdiv + 1) + 1; + needed = fps * sd->gspca_dev.width * sd->gspca_dev.height * 3 / 2; + /* 1400 is a conservative estimate of the max nr of isoc packets/sec */ + if (needed > 1400 * packet_size) { + /* Enable Y and UV quantization and compression */ + reg_w(sd, R511_COMP_EN, 0x07); + reg_w(sd, R511_COMP_LUT_EN, 0x03); + } else { + reg_w(sd, R511_COMP_EN, 0x06); + reg_w(sd, R511_COMP_LUT_EN, 0x00); + } + + reg_w(sd, R51x_SYS_RESET, OV511_RESET_OMNICE); + reg_w(sd, R51x_SYS_RESET, 0); + + return 0; +} + /* Sets up the OV518/OV518+ with the given image parameters * * OV518 needs a completely different approach, until we can figure out what @@ -1718,7 +2272,19 @@ static int sd_init(struct gspca_dev *gspca_dev) */ static int ov518_mode_init_regs(struct sd *sd) { - int hsegs, vsegs; + int hsegs, vsegs, packet_size; + struct usb_host_interface *alt; + struct usb_interface *intf; + + intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); + alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); + if (!alt) { + PDEBUG(D_ERR, "Couldn't get altsetting"); + return -EIO; + } + + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); + ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2); /******** Set the mode ********/ @@ -1755,20 +2321,30 @@ static int ov518_mode_init_regs(struct sd *sd) /* Windows driver does this here; who knows why */ reg_w(sd, 0x2f, 0x80); - /******** Set the framerate (to 30 FPS) ********/ - if (sd->bridge == BRIDGE_OV518PLUS) - sd->clockdiv = 1; - else - sd->clockdiv = 0; + /******** Set the framerate ********/ + sd->clockdiv = 1; /* Mode independent, but framerate dependent, regs */ - reg_w(sd, 0x51, 0x04); /* Clock divider; lower==faster */ + /* 0x51: Clock divider; Only works on some cams which use 2 crystals */ + reg_w(sd, 0x51, 0x04); reg_w(sd, 0x22, 0x18); reg_w(sd, 0x23, 0xff); - if (sd->bridge == BRIDGE_OV518PLUS) - reg_w(sd, 0x21, 0x19); - else + if (sd->bridge == BRIDGE_OV518PLUS) { + switch (sd->sensor) { + case SEN_OV7620: + if (sd->gspca_dev.width == 320) { + reg_w(sd, 0x20, 0x00); + reg_w(sd, 0x21, 0x19); + } else { + reg_w(sd, 0x20, 0x60); + reg_w(sd, 0x21, 0x1f); + } + break; + default: + reg_w(sd, 0x21, 0x19); + } + } else reg_w(sd, 0x71, 0x17); /* Compression-related? */ /* FIXME: Sensor-specific */ @@ -1879,7 +2455,11 @@ static int ov519_mode_init_regs(struct sd *sd) reg_w(sd, OV519_R10_H_SIZE, sd->gspca_dev.width >> 4); reg_w(sd, OV519_R11_V_SIZE, sd->gspca_dev.height >> 3); - reg_w(sd, OV519_R12_X_OFFSETL, 0x00); + if (sd->sensor == SEN_OV7670 && + sd->gspca_dev.cam.cam_mode[sd->gspca_dev.curr_mode].priv) + reg_w(sd, OV519_R12_X_OFFSETL, 0x04); + else + reg_w(sd, OV519_R12_X_OFFSETL, 0x00); reg_w(sd, OV519_R13_X_OFFSETH, 0x00); reg_w(sd, OV519_R14_Y_OFFSETL, 0x00); reg_w(sd, OV519_R15_Y_OFFSETH, 0x00); @@ -1971,7 +2551,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd) int qvga; gspca_dev = &sd->gspca_dev; - qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; + qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1; /******** Mode (VGA/QVGA) and sensor specific regs ********/ switch (sd->sensor) { @@ -1983,21 +2563,16 @@ static int mode_init_ov_sensor_regs(struct sd *sd) i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); break; case SEN_OV7620: -/* i2c_w(sd, 0x2b, 0x00); */ + case SEN_OV76BE: i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20); i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); i2c_w(sd, 0x25, qvga ? 0x30 : 0x60); i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); - i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0); + i2c_w_mask(sd, 0x67, qvga ? 0xb0 : 0x90, 0xf0); i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); break; - case SEN_OV76BE: -/* i2c_w(sd, 0x2b, 0x00); */ - i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); - break; case SEN_OV7640: -/* i2c_w(sd, 0x2b, 0x00); */ i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20); /* i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); */ @@ -2016,6 +2591,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd) break; case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); break; default: @@ -2023,10 +2599,6 @@ static int mode_init_ov_sensor_regs(struct sd *sd) } /******** Palette-specific regs ********/ - if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) { - /* not valid on the OV6620/OV7620/6630? */ - i2c_w_mask(sd, 0x0e, 0x00, 0x40); - } /* The OV518 needs special treatment. Although both the OV518 * and the OV6630 support a 16-bit video bus, only the 8 bit Y @@ -2036,25 +2608,12 @@ static int mode_init_ov_sensor_regs(struct sd *sd) /* OV7640 is 8-bit only */ - if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640) + if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV66308AF && + sd->sensor != SEN_OV7640) i2c_w_mask(sd, 0x13, 0x00, 0x20); /******** Clock programming ********/ - /* The OV6620 needs special handling. This prevents the - * severe banding that normally occurs */ - if (sd->sensor == SEN_OV6620) { - - /* Clock down */ - i2c_w(sd, 0x2a, 0x04); - i2c_w(sd, 0x11, sd->clockdiv); - i2c_w(sd, 0x2a, 0x84); - /* This next setting is critical. It seems to improve - * the gain or the contrast. The "reserved" bits seem - * to have some effect in this case. */ - i2c_w(sd, 0x2d, 0x85); - } else { - i2c_w(sd, 0x11, sd->clockdiv); - } + i2c_w(sd, 0x11, sd->clockdiv); /******** Special Features ********/ /* no evidence this is possible with OV7670, either */ @@ -2098,13 +2657,14 @@ static void sethvflip(struct sd *sd) static int set_ov_sensor_window(struct sd *sd) { struct gspca_dev *gspca_dev; - int qvga; + int qvga, crop; int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale; int ret, hstart, hstop, vstop, vstart; __u8 v; gspca_dev = &sd->gspca_dev; - qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; + qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1; + crop = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 2; /* The different sensor ICs handle setting up of window differently. * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!! */ @@ -2123,14 +2683,19 @@ static int set_ov_sensor_window(struct sd *sd) break; case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: hwsbase = 0x38; hwebase = 0x3a; vwsbase = 0x05; vwebase = 0x06; - if (qvga) { + if (sd->sensor == SEN_OV66308AF && qvga) /* HDG: this fixes U and V getting swapped */ - hwsbase--; - vwsbase--; + hwsbase++; + if (crop) { + hwsbase += 8; + hwebase += 8; + vwsbase += 11; + vwebase += 11; } break; case SEN_OV7620: @@ -2155,6 +2720,7 @@ static int set_ov_sensor_window(struct sd *sd) switch (sd->sensor) { case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: if (qvga) { /* QCIF */ hwscale = 0; vwscale = 0; @@ -2207,7 +2773,7 @@ static int set_ov_sensor_window(struct sd *sd) if (qvga) { /* QVGA from ov7670.c by * Jonathan Corbet */ hstart = 164; - hstop = 20; + hstop = 28; vstart = 14; vstop = 494; } else { /* VGA */ @@ -2233,7 +2799,6 @@ static int set_ov_sensor_window(struct sd *sd) msleep(10); /* need to sleep between read and write to * same reg! */ i2c_w(sd, OV7670_REG_VREF, v); - sethvflip(sd); } else { i2c_w(sd, 0x17, hwsbase); i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale)); @@ -2250,6 +2815,10 @@ static int sd_start(struct gspca_dev *gspca_dev) int ret = 0; switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + ret = ov511_mode_init_regs(sd); + break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: ret = ov518_mode_init_regs(sd); @@ -2268,6 +2837,9 @@ static int sd_start(struct gspca_dev *gspca_dev) setcontrast(gspca_dev); setbrightness(gspca_dev); setcolors(gspca_dev); + sethvflip(sd); + setautobrightness(sd); + setfreq(sd); ret = ov51x_restart(sd); if (ret < 0) @@ -2287,23 +2859,88 @@ static void sd_stopN(struct gspca_dev *gspca_dev) ov51x_led_control(sd, 0); } -static void ov518_pkt_scan(struct gspca_dev *gspca_dev, +static void ov511_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ - __u8 *data, /* isoc packet */ + __u8 *in, /* isoc packet */ int len) /* iso packet length */ { - PDEBUG(D_STREAM, "ov518_pkt_scan: %d bytes", len); + struct sd *sd = (struct sd *) gspca_dev; - if (len & 7) { - len--; - PDEBUG(D_STREAM, "packet number: %d\n", (int)data[len]); + /* SOF/EOF packets have 1st to 8th bytes zeroed and the 9th + * byte non-zero. The EOF packet has image width/height in the + * 10th and 11th bytes. The 9th byte is given as follows: + * + * bit 7: EOF + * 6: compression enabled + * 5: 422/420/400 modes + * 4: 422/420/400 modes + * 3: 1 + * 2: snapshot button on + * 1: snapshot frame + * 0: even/odd field + */ + if (!(in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) && + (in[8] & 0x08)) { + if (in[8] & 0x80) { + /* Frame end */ + if ((in[9] + 1) * 8 != gspca_dev->width || + (in[10] + 1) * 8 != gspca_dev->height) { + PDEBUG(D_ERR, "Invalid frame size, got: %dx%d," + " requested: %dx%d\n", + (in[9] + 1) * 8, (in[10] + 1) * 8, + gspca_dev->width, gspca_dev->height); + gspca_dev->last_packet_type = DISCARD_PACKET; + return; + } + /* Add 11 byte footer to frame, might be usefull */ + gspca_frame_add(gspca_dev, LAST_PACKET, frame, in, 11); + return; + } else { + /* Frame start */ + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, in, 0); + sd->packet_nr = 0; + } } + /* Ignore the packet number */ + len--; + + /* intermediate packet */ + gspca_frame_add(gspca_dev, INTER_PACKET, frame, in, len); +} + +static void ov518_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, /* target */ + __u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + /* A false positive here is likely, until OVT gives me * the definitive SOF/EOF format */ if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) { gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0); + sd->packet_nr = 0; + } + + if (gspca_dev->last_packet_type == DISCARD_PACKET) + return; + + /* Does this device use packet numbers ? */ + if (len & 7) { + len--; + if (sd->packet_nr == data[len]) + sd->packet_nr++; + /* The last few packets of the frame (which are all 0's + except that they may contain part of the footer), are + numbered 0 */ + else if (sd->packet_nr == 0 || data[len]) { + PDEBUG(D_ERR, "Invalid packet nr: %d (expect: %d)", + (int)data[len], (int)sd->packet_nr); + gspca_dev->last_packet_type = DISCARD_PACKET; + return; + } } /* intermediate packet */ @@ -2364,6 +3001,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, switch (sd->bridge) { case BRIDGE_OV511: case BRIDGE_OV511PLUS: + ov511_pkt_scan(gspca_dev, frame, data, len); break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: @@ -2389,13 +3027,13 @@ static void setbrightness(struct gspca_dev *gspca_dev) case SEN_OV76BE: case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: case SEN_OV7640: i2c_w(sd, OV7610_REG_BRT, val); break; case SEN_OV7620: /* 7620 doesn't like manual changes when in auto mode */ -/*fixme - * if (!sd->auto_brt) */ + if (!sd->autobrightness) i2c_w(sd, OV7610_REG_BRT, val); break; case SEN_OV7670: @@ -2418,6 +3056,7 @@ static void setcontrast(struct gspca_dev *gspca_dev) i2c_w(sd, OV7610_REG_CNT, val); break; case SEN_OV6630: + case SEN_OV66308AF: i2c_w_mask(sd, OV7610_REG_CNT, val >> 4, 0x0f); break; case SEN_OV8610: { @@ -2462,6 +3101,7 @@ static void setcolors(struct gspca_dev *gspca_dev) case SEN_OV76BE: case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: i2c_w(sd, OV7610_REG_SAT, val); break; case SEN_OV7620: @@ -2482,6 +3122,72 @@ static void setcolors(struct gspca_dev *gspca_dev) } } +static void setautobrightness(struct sd *sd) +{ + if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670) + return; + + i2c_w_mask(sd, 0x2d, sd->autobrightness ? 0x10 : 0x00, 0x10); +} + +static void setfreq(struct sd *sd) +{ + if (sd->sensor == SEN_OV7670) { + switch (sd->freq) { + case 0: /* Banding filter disabled */ + i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_BFILT); + break; + case 1: /* 50 hz */ + i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT, + OV7670_COM8_BFILT); + i2c_w_mask(sd, OV7670_REG_COM11, 0x08, 0x18); + break; + case 2: /* 60 hz */ + i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT, + OV7670_COM8_BFILT); + i2c_w_mask(sd, OV7670_REG_COM11, 0x00, 0x18); + break; + case 3: /* Auto hz */ + i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT, + OV7670_COM8_BFILT); + i2c_w_mask(sd, OV7670_REG_COM11, OV7670_COM11_HZAUTO, + 0x18); + break; + } + } else { + switch (sd->freq) { + case 0: /* Banding filter disabled */ + i2c_w_mask(sd, 0x2d, 0x00, 0x04); + i2c_w_mask(sd, 0x2a, 0x00, 0x80); + break; + case 1: /* 50 hz (filter on and framerate adj) */ + i2c_w_mask(sd, 0x2d, 0x04, 0x04); + i2c_w_mask(sd, 0x2a, 0x80, 0x80); + /* 20 fps -> 16.667 fps */ + if (sd->sensor == SEN_OV6620 || + sd->sensor == SEN_OV6630 || + sd->sensor == SEN_OV66308AF) + i2c_w(sd, 0x2b, 0x5e); + else + i2c_w(sd, 0x2b, 0xac); + break; + case 2: /* 60 hz (filter on, ...) */ + i2c_w_mask(sd, 0x2d, 0x04, 0x04); + if (sd->sensor == SEN_OV6620 || + sd->sensor == SEN_OV6630 || + sd->sensor == SEN_OV66308AF) { + /* 20 fps -> 15 fps */ + i2c_w_mask(sd, 0x2a, 0x80, 0x80); + i2c_w(sd, 0x2b, 0xa8); + } else { + /* no framerate adj. */ + i2c_w_mask(sd, 0x2a, 0x00, 0x80); + } + break; + } + } +} + static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; @@ -2572,6 +3278,71 @@ static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_setautobrightness(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->autobrightness = val; + if (gspca_dev->streaming) + setautobrightness(sd); + return 0; +} + +static int sd_getautobrightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->autobrightness; + return 0; +} + +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->freq = val; + if (gspca_dev->streaming) + setfreq(sd); + return 0; +} + +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->freq; + return 0; +} + +static int sd_querymenu(struct gspca_dev *gspca_dev, + struct v4l2_querymenu *menu) +{ + struct sd *sd = (struct sd *) gspca_dev; + + switch (menu->id) { + case V4L2_CID_POWER_LINE_FREQUENCY: + switch (menu->index) { + case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */ + strcpy((char *) menu->name, "NoFliker"); + return 0; + case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */ + strcpy((char *) menu->name, "50 Hz"); + return 0; + case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */ + strcpy((char *) menu->name, "60 Hz"); + return 0; + case 3: + if (sd->sensor != SEN_OV7670) + return -EINVAL; + + strcpy((char *) menu->name, "Automatic"); + return 0; + } + break; + } + return -EINVAL; +} + /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, @@ -2582,6 +3353,7 @@ static const struct sd_desc sd_desc = { .start = sd_start, .stopN = sd_stopN, .pkt_scan = sd_pkt_scan, + .querymenu = sd_querymenu, }; /* -- module initialisation -- */ @@ -2590,17 +3362,22 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 }, - {USB_DEVICE(0x041e, 0x4064), .driver_info = BRIDGE_OV519 }, - {USB_DEVICE(0x041e, 0x4068), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x041e, 0x4064), + .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, + {USB_DEVICE(0x041e, 0x4068), + .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, {USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 }, {USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 }, {USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0xa511), .driver_info = BRIDGE_OV511PLUS }, {USB_DEVICE(0x05a9, 0xa518), .driver_info = BRIDGE_OV518PLUS }, + {USB_DEVICE(0x0813, 0x0002), .driver_info = BRIDGE_OV511PLUS }, {} }; diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index dc6a6f11354a..0d02f41fa7d0 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -46,6 +46,7 @@ struct sd { u8 gamma; u8 vflip; /* ov7630/ov7648 only */ u8 infrared; /* mt9v111 only */ + u8 freq; /* ov76xx only */ u8 quality; /* image quality */ #define QUALITY_MIN 60 #define QUALITY_MAX 95 @@ -96,8 +97,11 @@ static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setinfrared(struct gspca_dev *gspca_dev, __s32 val); static int sd_getinfrared(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { +#define BRIGHTNESS_IDX 0 { { .id = V4L2_CID_BRIGHTNESS, @@ -113,6 +117,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setbrightness, .get = sd_getbrightness, }, +#define CONTRAST_IDX 1 { { .id = V4L2_CID_CONTRAST, @@ -128,20 +133,22 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcontrast, .get = sd_getcontrast, }, +#define COLOR_IDX 2 { { .id = V4L2_CID_SATURATION, .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Color", + .name = "Saturation", .minimum = 0, .maximum = 40, .step = 1, -#define COLOR_DEF 32 +#define COLOR_DEF 25 .default_value = COLOR_DEF, }, .set = sd_setcolors, .get = sd_getcolors, }, +#define BLUE_BALANCE_IDX 3 { { .id = V4L2_CID_BLUE_BALANCE, @@ -156,6 +163,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setblue_balance, .get = sd_getblue_balance, }, +#define RED_BALANCE_IDX 4 { { .id = V4L2_CID_RED_BALANCE, @@ -170,6 +178,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setred_balance, .get = sd_getred_balance, }, +#define GAMMA_IDX 5 { { .id = V4L2_CID_GAMMA, @@ -184,7 +193,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setgamma, .get = sd_getgamma, }, -#define AUTOGAIN_IDX 5 +#define AUTOGAIN_IDX 6 { { .id = V4L2_CID_AUTOGAIN, @@ -200,7 +209,7 @@ static struct ctrl sd_ctrls[] = { .get = sd_getautogain, }, /* ov7630/ov7648 only */ -#define VFLIP_IDX 6 +#define VFLIP_IDX 7 { { .id = V4L2_CID_VFLIP, @@ -209,14 +218,14 @@ static struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define VFLIP_DEF 0 /* vflip def = 1 for ov7630 */ +#define VFLIP_DEF 0 .default_value = VFLIP_DEF, }, .set = sd_setvflip, .get = sd_getvflip, }, /* mt9v111 only */ -#define INFRARED_IDX 7 +#define INFRARED_IDX 8 { { .id = V4L2_CID_INFRARED, @@ -231,28 +240,44 @@ static struct ctrl sd_ctrls[] = { .set = sd_setinfrared, .get = sd_getinfrared, }, +/* ov7630/ov7648/ov7660 only */ +#define FREQ_IDX 9 + { + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Light frequency filter", + .minimum = 0, + .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */ + .step = 1, +#define FREQ_DEF 2 + .default_value = FREQ_DEF, + }, + .set = sd_setfreq, + .get = sd_getfreq, + }, }; /* table of the disabled controls */ static __u32 ctrl_dis[] = { - (1 << INFRARED_IDX) | (1 << VFLIP_IDX), + (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX), /* SENSOR_HV7131R 0 */ - (1 << INFRARED_IDX) | (1 << VFLIP_IDX), + (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX), /* SENSOR_MI0360 1 */ - (1 << INFRARED_IDX) | (1 << VFLIP_IDX), + (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX), /* SENSOR_MO4000 2 */ - (1 << VFLIP_IDX), + (1 << VFLIP_IDX) | (1 << FREQ_IDX), /* SENSOR_MT9V111 3 */ - (1 << INFRARED_IDX) | (1 << VFLIP_IDX), + (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX), /* SENSOR_OM6802 4 */ - (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX), + (1 << INFRARED_IDX), /* SENSOR_OV7630 5 */ (1 << INFRARED_IDX), /* SENSOR_OV7648 6 */ (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX), /* SENSOR_OV7660 7 */ - (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX), - /* SENSOR_SP80708 8 */ + (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | + (1 << FREQ_IDX), /* SENSOR_SP80708 8 */ }; static const struct v4l2_pix_format vga_mode[] = { @@ -268,7 +293,8 @@ static const struct v4l2_pix_format vga_mode[] = { .priv = 1}, {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 640, - .sizeimage = 640 * 480 * 3 / 8 + 590, + /* Note 3 / 8 is not large enough, not even 5 / 8 is ?! */ + .sizeimage = 640 * 480 * 3 / 4 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, }; @@ -604,7 +630,9 @@ static const u8 ov7630_sensor_init[][8] = { /* win: i2c_r from 00 to 80 */ {0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10}, {0xb1, 0x21, 0x0c, 0x20, 0x20, 0x00, 0x00, 0x10}, - {0xd1, 0x21, 0x11, 0x00, 0x48, 0xc0, 0x00, 0x10}, +/* HDG: 0x11 was 0x00 change to 0x01 for better exposure (15 fps instead of 30) + 0x13 was 0xc0 change to 0xc3 for auto gain and exposure */ + {0xd1, 0x21, 0x11, 0x01, 0x48, 0xc3, 0x00, 0x10}, {0xb1, 0x21, 0x15, 0x80, 0x03, 0x00, 0x00, 0x10}, {0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10}, {0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10}, @@ -638,9 +666,8 @@ static const u8 ov7630_sensor_init[][8] = { {0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10}, {0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10}, /* */ - {0xa1, 0x21, 0x11, 0x00, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10}, +/* {0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10}, * set by setfreq */ +/* {0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10}, * set by setfreq */ /* */ {0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10}, /* {0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10}, */ @@ -673,7 +700,7 @@ static const u8 ov7648_sensor_init[][8] = { {0xd1, 0x21, 0x21, 0x86, 0x00, 0xde, 0xa0, 0x10}, /* {0xd1, 0x21, 0x25, 0x80, 0x32, 0xfe, 0xa0, 0x10}, jfm done */ /* {0xd1, 0x21, 0x29, 0x00, 0x91, 0x00, 0x88, 0x10}, jfm done */ - {0xb1, 0x21, 0x2d, 0x85, 0x00, 0x00, 0x00, 0x10}, +/* {0xb1, 0x21, 0x2d, 0x85, 0x00, 0x00, 0x00, 0x10}, set by setfreq */ /*...*/ /* {0xa1, 0x21, 0x12, 0x08, 0x00, 0x00, 0x00, 0x10}, jfm done */ /* {0xa1, 0x21, 0x75, 0x06, 0x00, 0x00, 0x00, 0x10}, * COMN @@ -1294,11 +1321,9 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->gamma = GAMMA_DEF; sd->autogain = AUTOGAIN_DEF; sd->ag_cnt = -1; - if (sd->sensor != SENSOR_OV7630) - sd->vflip = 0; - else - sd->vflip = 1; + sd->vflip = VFLIP_DEF; sd->infrared = INFRARED_DEF; + sd->freq = FREQ_DEF; sd->quality = QUALITY_DEF; sd->jpegqual = 80; @@ -1569,7 +1594,7 @@ static void setautogain(struct gspca_dev *gspca_dev) else comb = 0xa0; if (sd->autogain) - comb |= 0x02; + comb |= 0x03; i2c_w1(&sd->gspca_dev, 0x13, comb); return; } @@ -1585,12 +1610,15 @@ static void setvflip(struct sd *sd) { u8 comn; - if (sd->sensor == SENSOR_OV7630) + if (sd->sensor == SENSOR_OV7630) { comn = 0x02; - else + if (!sd->vflip) + comn |= 0x80; + } else { comn = 0x06; - if (sd->vflip) - comn |= 0x80; + if (sd->vflip) + comn |= 0x80; + } i2c_w1(&sd->gspca_dev, 0x75, comn); } @@ -1602,6 +1630,58 @@ static void setinfrared(struct sd *sd) sd->infrared ? 0x66 : 0x64); } +static void setfreq(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->sensor == SENSOR_OV7660) { + switch (sd->freq) { + case 0: /* Banding filter disabled */ + i2c_w1(gspca_dev, 0x13, 0xdf); + break; + case 1: /* 50 hz */ + i2c_w1(gspca_dev, 0x13, 0xff); + i2c_w1(gspca_dev, 0x3b, 0x0a); + break; + case 2: /* 60 hz */ + i2c_w1(gspca_dev, 0x13, 0xff); + i2c_w1(gspca_dev, 0x3b, 0x02); + break; + } + } else { + u8 reg2a = 0, reg2b = 0, reg2d = 0; + + /* Get reg2a / reg2d base values */ + switch (sd->sensor) { + case SENSOR_OV7630: + reg2a = 0x08; + reg2d = 0x01; + break; + case SENSOR_OV7648: + reg2a = 0x11; + reg2d = 0x81; + break; + } + + switch (sd->freq) { + case 0: /* Banding filter disabled */ + break; + case 1: /* 50 hz (filter on and framerate adj) */ + reg2a |= 0x80; + reg2b = 0xac; + reg2d |= 0x04; + break; + case 2: /* 60 hz (filter on, no framerate adj) */ + reg2a |= 0x80; + reg2d |= 0x04; + break; + } + i2c_w1(gspca_dev, 0x2a, reg2a); + i2c_w1(gspca_dev, 0x2b, reg2b); + i2c_w1(gspca_dev, 0x2d, reg2d); + } +} + static void setjpegqual(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -1828,6 +1908,7 @@ static int sd_start(struct gspca_dev *gspca_dev) setbrightness(gspca_dev); setcontrast(gspca_dev); setautogain(gspca_dev); + setfreq(gspca_dev); return 0; } @@ -2131,6 +2212,24 @@ static int sd_getinfrared(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->freq = val; + if (gspca_dev->streaming) + setfreq(gspca_dev); + return 0; +} + +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->freq; + return 0; +} + static int sd_set_jcomp(struct gspca_dev *gspca_dev, struct v4l2_jpegcompression *jcomp) { @@ -2159,6 +2258,27 @@ static int sd_get_jcomp(struct gspca_dev *gspca_dev, return 0; } +static int sd_querymenu(struct gspca_dev *gspca_dev, + struct v4l2_querymenu *menu) +{ + switch (menu->id) { + case V4L2_CID_POWER_LINE_FREQUENCY: + switch (menu->index) { + case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */ + strcpy((char *) menu->name, "NoFliker"); + return 0; + case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */ + strcpy((char *) menu->name, "50 Hz"); + return 0; + case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */ + strcpy((char *) menu->name, "60 Hz"); + return 0; + } + break; + } + return -EINVAL; +} + /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, @@ -2173,6 +2293,7 @@ static const struct sd_desc sd_desc = { .dq_callback = do_autogain, .get_jcomp = sd_get_jcomp, .set_jcomp = sd_set_jcomp, + .querymenu = sd_querymenu, }; /* -- module initialisation -- */ @@ -2233,7 +2354,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x613b), BSI(SN9C120, OV7660, 0x21)}, #endif {USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)}, -/* {USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x??)}, */ + {USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x21)}, {USB_DEVICE(0x0c45, 0x6143), BSI(SN9C120, SP80708, 0x18)}, {} }; diff --git a/drivers/media/video/gspca/stv06xx/Makefile b/drivers/media/video/gspca/stv06xx/Makefile index feeaa94ab588..2f3c3a606ce4 100644 --- a/drivers/media/video/gspca/stv06xx/Makefile +++ b/drivers/media/video/gspca/stv06xx/Makefile @@ -3,7 +3,8 @@ obj-$(CONFIG_USB_STV06XX) += gspca_stv06xx.o gspca_stv06xx-objs := stv06xx.o \ stv06xx_vv6410.o \ stv06xx_hdcs.o \ - stv06xx_pb0100.o + stv06xx_pb0100.o \ + stv06xx_st6422.o EXTRA_CFLAGS += -Idrivers/media/video/gspca diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c index e573c3406324..0da8e0de0456 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx.c @@ -92,11 +92,10 @@ static int stv06xx_write_sensor_finish(struct sd *sd) { int err = 0; - if (IS_850(sd)) { + if (sd->bridge == BRIDGE_STV610) { struct usb_device *udev = sd->gspca_dev.dev; __u8 *buf = sd->gspca_dev.usb_buf; - /* Quickam Web needs an extra packet */ buf[0] = 0; err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x04, 0x40, 0x1704, 0, buf, 1, @@ -253,7 +252,7 @@ static int stv06xx_init(struct gspca_dev *gspca_dev) err = sd->sensor->init(sd); - if (dump_sensor) + if (dump_sensor && sd->sensor->dump) sd->sensor->dump(sd); return (err < 0) ? err : 0; @@ -318,6 +317,8 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, __u8 *data, /* isoc packet */ int len) /* iso packet length */ { + struct sd *sd = (struct sd *) gspca_dev; + PDEBUG(D_PACK, "Packet of length %d arrived", len); /* A packet may contain several frames @@ -343,14 +344,29 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, if (len < chunk_len) { PDEBUG(D_ERR, "URB packet length is smaller" " than the specified chunk length"); + gspca_dev->last_packet_type = DISCARD_PACKET; return; } + /* First byte seem to be 02=data 2nd byte is unknown??? */ + if (sd->bridge == BRIDGE_ST6422 && (id & 0xFF00) == 0x0200) + goto frame_data; + switch (id) { case 0x0200: case 0x4200: +frame_data: PDEBUG(D_PACK, "Frame data packet detected"); + if (sd->to_skip) { + int skip = (sd->to_skip < chunk_len) ? + sd->to_skip : chunk_len; + data += skip; + len -= skip; + chunk_len -= skip; + sd->to_skip -= skip; + } + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, chunk_len); break; @@ -365,6 +381,9 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0); + if (sd->bridge == BRIDGE_ST6422) + sd->to_skip = gspca_dev->width * 4; + if (chunk_len) PDEBUG(D_ERR, "Chunk length is " "non-zero on a SOF"); @@ -395,8 +414,12 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, /* Unknown chunk with 2 bytes of data, occurs 2-3 times per USB interrupt */ break; + case 0x42ff: + PDEBUG(D_PACK, "Chunk 0x42ff detected"); + /* Special chunk seen sometimes on the ST6422 */ + break; default: - PDEBUG(D_PACK, "Unknown chunk %d detected", id); + PDEBUG(D_PACK, "Unknown chunk 0x%04x detected", id); /* Unknown chunk */ } data += chunk_len; @@ -428,11 +451,16 @@ static int stv06xx_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; sd->desc = sd_desc; + sd->bridge = id->driver_info; gspca_dev->sd_desc = &sd->desc; if (dump_bridge) stv06xx_dump_bridge(sd); + sd->sensor = &stv06xx_sensor_st6422; + if (!sd->sensor->probe(sd)) + return 0; + sd->sensor = &stv06xx_sensor_vv6410; if (!sd->sensor->probe(sd)) return 0; @@ -457,9 +485,20 @@ static int stv06xx_config(struct gspca_dev *gspca_dev, /* -- module initialisation -- */ static const __devinitdata struct usb_device_id device_table[] = { - {USB_DEVICE(0x046d, 0x0840)}, /* QuickCam Express */ - {USB_DEVICE(0x046d, 0x0850)}, /* LEGO cam / QuickCam Web */ - {USB_DEVICE(0x046d, 0x0870)}, /* Dexxa WebCam USB */ + /* QuickCam Express */ + {USB_DEVICE(0x046d, 0x0840), .driver_info = BRIDGE_STV600 }, + /* LEGO cam / QuickCam Web */ + {USB_DEVICE(0x046d, 0x0850), .driver_info = BRIDGE_STV610 }, + /* Dexxa WebCam USB */ + {USB_DEVICE(0x046d, 0x0870), .driver_info = BRIDGE_STV602 }, + /* QuickCam Messenger */ + {USB_DEVICE(0x046D, 0x08F0), .driver_info = BRIDGE_ST6422 }, + /* QuickCam Communicate */ + {USB_DEVICE(0x046D, 0x08F5), .driver_info = BRIDGE_ST6422 }, + /* QuickCam Messenger (new) */ + {USB_DEVICE(0x046D, 0x08F6), .driver_info = BRIDGE_ST6422 }, + /* QuickCam Messenger (new) */ + {USB_DEVICE(0x046D, 0x08DA), .driver_info = BRIDGE_ST6422 }, {} }; MODULE_DEVICE_TABLE(usb, device_table); diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h index 1207e7d17f14..992ce530f138 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.h +++ b/drivers/media/video/gspca/stv06xx/stv06xx.h @@ -36,10 +36,6 @@ #define STV_ISOC_ENDPOINT_ADDR 0x81 -#ifndef V4L2_PIX_FMT_SGRBG8 -#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') -#endif - #define STV_REG23 0x0423 /* Control registers of the STV0600 ASIC */ @@ -93,6 +89,17 @@ struct sd { /* Sensor private data */ void *sensor_priv; + + /* The first 4 lines produced by the stv6422 are no good, this keeps + track of how many bytes we still need to skip during a frame */ + int to_skip; + + /* Bridge / Camera type */ + u8 bridge; + #define BRIDGE_STV600 0 + #define BRIDGE_STV602 1 + #define BRIDGE_STV610 2 + #define BRIDGE_ST6422 3 /* With integrated sensor */ }; int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data); diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c index b16903814203..3039ec208f3a 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c @@ -434,7 +434,7 @@ static int hdcs_probe_1x00(struct sd *sd) hdcs->exp.er = 100; /* - * Frame rate on HDCS-1000 0x46D:0x840 depends on PSMP: + * Frame rate on HDCS-1000 with STV600 depends on PSMP: * 4 = doesn't work at all * 5 = 7.8 fps, * 6 = 6.9 fps, @@ -443,7 +443,7 @@ static int hdcs_probe_1x00(struct sd *sd) * 15 = 4.4 fps, * 31 = 2.8 fps * - * Frame rate on HDCS-1000 0x46D:0x870 depends on PSMP: + * Frame rate on HDCS-1000 with STV602 depends on PSMP: * 15 = doesn't work at all * 18 = doesn't work at all * 19 = 7.3 fps @@ -453,7 +453,7 @@ static int hdcs_probe_1x00(struct sd *sd) * 24 = 6.3 fps * 30 = 5.4 fps */ - hdcs->psmp = IS_870(sd) ? 20 : 5; + hdcs->psmp = (sd->bridge == BRIDGE_STV602) ? 20 : 5; sd->sensor_priv = hdcs; @@ -530,7 +530,7 @@ static int hdcs_init(struct sd *sd) int i, err = 0; /* Set the STV0602AA in STV0600 emulation mode */ - if (IS_870(sd)) + if (sd->bridge == BRIDGE_STV602) stv06xx_write_bridge(sd, STV_STV0600_EMULATION, 1); /* Execute the bridge init */ @@ -558,7 +558,7 @@ static int hdcs_init(struct sd *sd) return err; /* Set PGA sample duration - (was 0x7E for IS_870, but caused slow framerate with HDCS-1020) */ + (was 0x7E for the STV602, but caused slow framerate with HDCS-1020) */ if (IS_1020(sd)) err = stv06xx_write_sensor(sd, HDCS_TCTRL, (HDCS_ADC_START_SIG_DUR << 6) | hdcs->psmp); diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h b/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h index e88c42f7d2f8..934b9cebc1ab 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h +++ b/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h @@ -32,14 +32,13 @@ #include "stv06xx.h" -#define IS_850(sd) ((sd)->gspca_dev.dev->descriptor.idProduct == 0x850) -#define IS_870(sd) ((sd)->gspca_dev.dev->descriptor.idProduct == 0x870) #define IS_1020(sd) ((sd)->sensor == &stv06xx_sensor_hdcs1020) extern const struct stv06xx_sensor stv06xx_sensor_vv6410; extern const struct stv06xx_sensor stv06xx_sensor_hdcs1x00; extern const struct stv06xx_sensor stv06xx_sensor_hdcs1020; extern const struct stv06xx_sensor stv06xx_sensor_pb0100; +extern const struct stv06xx_sensor stv06xx_sensor_st6422; struct stv06xx_sensor { /* Defines the name of a sensor */ diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c new file mode 100644 index 000000000000..87cb5b9ddfa7 --- /dev/null +++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c @@ -0,0 +1,453 @@ +/* + * Support for the sensor part which is integrated (I think) into the + * st6422 stv06xx alike bridge, as its integrated there are no i2c writes + * but instead direct bridge writes. + * + * Copyright (c) 2009 Hans de Goede <hdegoede@redhat.com> + * + * Strongly based on qc-usb-messenger, which is: + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include "stv06xx_st6422.h" + +static struct v4l2_pix_format st6422_mode[] = { + /* Note we actually get 124 lines of data, of which we skip the 4st + 4 as they are garbage */ + { + 162, + 120, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .sizeimage = 162 * 120, + .bytesperline = 162, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + }, + /* Note we actually get 248 lines of data, of which we skip the 4st + 4 as they are garbage, and we tell the app it only gets the + first 240 of the 244 lines it actually gets, so that it ignores + the last 4. */ + { + 324, + 240, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .sizeimage = 324 * 244, + .bytesperline = 324, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 + }, +}; + +static const struct ctrl st6422_ctrl[] = { +#define BRIGHTNESS_IDX 0 + { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 31, + .step = 1, + .default_value = 3 + }, + .set = st6422_set_brightness, + .get = st6422_get_brightness + }, +#define CONTRAST_IDX 1 + { + { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 15, + .step = 1, + .default_value = 11 + }, + .set = st6422_set_contrast, + .get = st6422_get_contrast + }, +#define GAIN_IDX 2 + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 64 + }, + .set = st6422_set_gain, + .get = st6422_get_gain + }, +#define EXPOSURE_IDX 3 + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, + .maximum = 1023, + .step = 1, + .default_value = 256 + }, + .set = st6422_set_exposure, + .get = st6422_get_exposure + }, +}; + +static int st6422_probe(struct sd *sd) +{ + int i; + s32 *sensor_settings; + + if (sd->bridge != BRIDGE_ST6422) + return -ENODEV; + + info("st6422 sensor detected"); + + sensor_settings = kmalloc(ARRAY_SIZE(st6422_ctrl) * sizeof(s32), + GFP_KERNEL); + if (!sensor_settings) + return -ENOMEM; + + sd->gspca_dev.cam.cam_mode = st6422_mode; + sd->gspca_dev.cam.nmodes = ARRAY_SIZE(st6422_mode); + sd->desc.ctrls = st6422_ctrl; + sd->desc.nctrls = ARRAY_SIZE(st6422_ctrl); + sd->sensor_priv = sensor_settings; + + for (i = 0; i < sd->desc.nctrls; i++) + sensor_settings[i] = st6422_ctrl[i].qctrl.default_value; + + return 0; +} + +static int st6422_init(struct sd *sd) +{ + int err = 0, i; + + const u16 st6422_bridge_init[][2] = { + { STV_ISO_ENABLE, 0x00 }, /* disable capture */ + { 0x1436, 0x00 }, + { 0x1432, 0x03 }, /* 0x00-0x1F brightness */ + { 0x143a, 0xF9 }, /* 0x00-0x0F contrast */ + { 0x0509, 0x38 }, /* R */ + { 0x050a, 0x38 }, /* G */ + { 0x050b, 0x38 }, /* B */ + { 0x050c, 0x2A }, + { 0x050d, 0x01 }, + + + { 0x1431, 0x00 }, /* 0x00-0x07 ??? */ + { 0x1433, 0x34 }, /* 160x120, 0x00-0x01 night filter */ + { 0x1438, 0x18 }, /* 640x480 */ +/* 18 bayes */ +/* 10 compressed? */ + + { 0x1439, 0x00 }, +/* antiflimmer?? 0xa2 ger perfekt bild mot monitor */ + + { 0x143b, 0x05 }, + { 0x143c, 0x00 }, /* 0x00-0x01 - ??? */ + + +/* shutter time 0x0000-0x03FF */ +/* low value give good picures on moving objects (but requires much light) */ +/* high value gives good picures in darkness (but tends to be overexposed) */ + { 0x143e, 0x01 }, + { 0x143d, 0x00 }, + + { 0x1442, 0xe2 }, +/* write: 1x1x xxxx */ +/* read: 1x1x xxxx */ +/* bit 5 == button pressed and hold if 0 */ +/* write 0xe2,0xea */ + +/* 0x144a */ +/* 0x00 init */ +/* bit 7 == button has been pressed, but not handled */ + +/* interrupt */ +/* if(urb->iso_frame_desc[i].status == 0x80) { */ +/* if(urb->iso_frame_desc[i].status == 0x88) { */ + + { 0x1500, 0xd0 }, + { 0x1500, 0xd0 }, + { 0x1500, 0x50 }, /* 0x00 - 0xFF 0x80 == compr ? */ + + { 0x1501, 0xaf }, +/* high val-> ljus area blir morkare. */ +/* low val -> ljus area blir ljusare. */ + { 0x1502, 0xc2 }, +/* high val-> ljus area blir morkare. */ +/* low val -> ljus area blir ljusare. */ + { 0x1503, 0x45 }, +/* high val-> ljus area blir morkare. */ +/* low val -> ljus area blir ljusare. */ + + { 0x1505, 0x02 }, +/* 2 : 324x248 80352 bytes */ +/* 7 : 248x162 40176 bytes */ +/* c+f: 162*124 20088 bytes */ + + { 0x150e, 0x8e }, + { 0x150f, 0x37 }, + { 0x15c0, 0x00 }, + { 0x15c1, 1023 }, /* 160x120, ISOC_PACKET_SIZE */ + { 0x15c3, 0x08 }, /* 0x04/0x14 ... test pictures ??? */ + + + { 0x143f, 0x01 }, /* commit settings */ + + }; + + for (i = 0; i < ARRAY_SIZE(st6422_bridge_init) && !err; i++) { + err = stv06xx_write_bridge(sd, st6422_bridge_init[i][0], + st6422_bridge_init[i][1]); + } + + return err; +} + +static void st6422_disconnect(struct sd *sd) +{ + sd->sensor = NULL; + kfree(sd->sensor_priv); +} + +static int st6422_start(struct sd *sd) +{ + int err, packet_size; + struct cam *cam = &sd->gspca_dev.cam; + s32 *sensor_settings = sd->sensor_priv; + struct usb_host_interface *alt; + struct usb_interface *intf; + + intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); + alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); + if (!alt) { + PDEBUG(D_ERR, "Couldn't get altsetting"); + return -EIO; + } + + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); + err = stv06xx_write_bridge(sd, 0x15c1, packet_size); + if (err < 0) + return err; + + if (cam->cam_mode[sd->gspca_dev.curr_mode].priv) + err = stv06xx_write_bridge(sd, 0x1505, 0x0f); + else + err = stv06xx_write_bridge(sd, 0x1505, 0x02); + if (err < 0) + return err; + + err = st6422_set_brightness(&sd->gspca_dev, + sensor_settings[BRIGHTNESS_IDX]); + if (err < 0) + return err; + + err = st6422_set_contrast(&sd->gspca_dev, + sensor_settings[CONTRAST_IDX]); + if (err < 0) + return err; + + err = st6422_set_exposure(&sd->gspca_dev, + sensor_settings[EXPOSURE_IDX]); + if (err < 0) + return err; + + err = st6422_set_gain(&sd->gspca_dev, + sensor_settings[GAIN_IDX]); + if (err < 0) + return err; + + PDEBUG(D_STREAM, "Starting stream"); + + return 0; +} + +static int st6422_stop(struct sd *sd) +{ + PDEBUG(D_STREAM, "Halting stream"); + + return 0; +} + +static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[BRIGHTNESS_IDX]; + + PDEBUG(D_V4L2, "Read brightness %d", *val); + + return 0; +} + +static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[BRIGHTNESS_IDX] = val; + + if (!gspca_dev->streaming) + return 0; + + /* val goes from 0 -> 31 */ + PDEBUG(D_V4L2, "Set brightness to %d", val); + err = stv06xx_write_bridge(sd, 0x1432, val); + if (err < 0) + return err; + + /* commit settings */ + err = stv06xx_write_bridge(sd, 0x143f, 0x01); + return (err < 0) ? err : 0; +} + +static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[CONTRAST_IDX]; + + PDEBUG(D_V4L2, "Read contrast %d", *val); + + return 0; +} + +static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[CONTRAST_IDX] = val; + + if (!gspca_dev->streaming) + return 0; + + /* Val goes from 0 -> 15 */ + PDEBUG(D_V4L2, "Set contrast to %d\n", val); + err = stv06xx_write_bridge(sd, 0x143a, 0xf0 | val); + if (err < 0) + return err; + + /* commit settings */ + err = stv06xx_write_bridge(sd, 0x143f, 0x01); + return (err < 0) ? err : 0; +} + +static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[GAIN_IDX]; + + PDEBUG(D_V4L2, "Read gain %d", *val); + + return 0; +} + +static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[GAIN_IDX] = val; + + if (!gspca_dev->streaming) + return 0; + + PDEBUG(D_V4L2, "Set gain to %d", val); + + /* Set red, green, blue, gain */ + err = stv06xx_write_bridge(sd, 0x0509, val); + if (err < 0) + return err; + + err = stv06xx_write_bridge(sd, 0x050a, val); + if (err < 0) + return err; + + err = stv06xx_write_bridge(sd, 0x050b, val); + if (err < 0) + return err; + + /* 2 mystery writes */ + err = stv06xx_write_bridge(sd, 0x050c, 0x2a); + if (err < 0) + return err; + + err = stv06xx_write_bridge(sd, 0x050d, 0x01); + if (err < 0) + return err; + + /* commit settings */ + err = stv06xx_write_bridge(sd, 0x143f, 0x01); + return (err < 0) ? err : 0; +} + +static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[EXPOSURE_IDX]; + + PDEBUG(D_V4L2, "Read exposure %d", *val); + + return 0; +} + +static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[EXPOSURE_IDX] = val; + + if (!gspca_dev->streaming) + return 0; + + PDEBUG(D_V4L2, "Set exposure to %d\n", val); + err = stv06xx_write_bridge(sd, 0x143d, val & 0xff); + if (err < 0) + return err; + + err = stv06xx_write_bridge(sd, 0x143e, val >> 8); + if (err < 0) + return err; + + /* commit settings */ + err = stv06xx_write_bridge(sd, 0x143f, 0x01); + return (err < 0) ? err : 0; +} diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h new file mode 100644 index 000000000000..b2d45fe50522 --- /dev/null +++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h @@ -0,0 +1,59 @@ +/* + * Support for the sensor part which is integrated (I think) into the + * st6422 stv06xx alike bridge, as its integrated there are no i2c writes + * but instead direct bridge writes. + * + * Copyright (c) 2009 Hans de Goede <hdegoede@redhat.com> + * + * Strongly based on qc-usb-messenger, which is: + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef STV06XX_ST6422_H_ +#define STV06XX_ST6422_H_ + +#include "stv06xx_sensor.h" + +static int st6422_probe(struct sd *sd); +static int st6422_start(struct sd *sd); +static int st6422_init(struct sd *sd); +static int st6422_stop(struct sd *sd); +static void st6422_disconnect(struct sd *sd); + +/* V4L2 controls supported by the driver */ +static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val); +static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val); +static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val); +static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val); +static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val); +static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); +static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val); + +const struct stv06xx_sensor stv06xx_sensor_st6422 = { + .name = "ST6422", + .init = st6422_init, + .probe = st6422_probe, + .start = st6422_start, + .stop = st6422_stop, + .disconnect = st6422_disconnect, +}; + +#endif diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c index 84995bcf4a75..a3b77ed3f089 100644 --- a/drivers/media/video/ivtv/ivtv-controls.c +++ b/drivers/media/video/ivtv/ivtv-controls.c @@ -60,6 +60,8 @@ int ivtv_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl) switch (qctrl->id) { /* Standard V4L2 controls */ + case V4L2_CID_USER_CLASS: + return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); case V4L2_CID_BRIGHTNESS: case V4L2_CID_HUE: case V4L2_CID_SATURATION: diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c index 459c04cbf69d..4d794b42d6cd 100644 --- a/drivers/media/video/mt9m001.c +++ b/drivers/media/video/mt9m001.c @@ -280,15 +280,9 @@ static int mt9m001_try_fmt(struct soc_camera_device *icd, { struct v4l2_pix_format *pix = &f->fmt.pix; - if (pix->height < 32 + icd->y_skip_top) - pix->height = 32 + icd->y_skip_top; - if (pix->height > 1024 + icd->y_skip_top) - pix->height = 1024 + icd->y_skip_top; - if (pix->width < 48) - pix->width = 48; - if (pix->width > 1280) - pix->width = 1280; - pix->width &= ~0x01; /* has to be even, unsure why was ~3 */ + v4l_bound_align_image(&pix->width, 48, 1280, 1, + &pix->height, 32 + icd->y_skip_top, + 1024 + icd->y_skip_top, 0, 0); return 0; } diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c index f72aeb7c4deb..4207fb342670 100644 --- a/drivers/media/video/mt9t031.c +++ b/drivers/media/video/mt9t031.c @@ -385,17 +385,9 @@ static int mt9t031_try_fmt(struct soc_camera_device *icd, { struct v4l2_pix_format *pix = &f->fmt.pix; - if (pix->height < MT9T031_MIN_HEIGHT) - pix->height = MT9T031_MIN_HEIGHT; - if (pix->height > MT9T031_MAX_HEIGHT) - pix->height = MT9T031_MAX_HEIGHT; - if (pix->width < MT9T031_MIN_WIDTH) - pix->width = MT9T031_MIN_WIDTH; - if (pix->width > MT9T031_MAX_WIDTH) - pix->width = MT9T031_MAX_WIDTH; - - pix->width &= ~0x01; /* has to be even */ - pix->height &= ~0x01; /* has to be even */ + v4l_bound_align_image( + &pix->width, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH, 1, + &pix->height, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT, 1, 0); return 0; } diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c new file mode 100644 index 000000000000..1fe8fc9183a7 --- /dev/null +++ b/drivers/media/video/mt9v011.c @@ -0,0 +1,431 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <linux/delay.h> +#include <media/v4l2-device.h> +#include "mt9v011.h" +#include <media/v4l2-i2c-drv.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("Micron mt9v011 sensor driver"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_LICENSE("GPL"); + + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +/* supported controls */ +static struct v4l2_queryctrl mt9v011_qctrl[] = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = (1 << 10) - 1, + .step = 1, + .default_value = 0x0020, + .flags = 0, + }, { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, +}; + +struct mt9v011 { + struct v4l2_subdev sd; + unsigned width, height; + + u16 global_gain, red_bal, blue_bal; +}; + +static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9v011, sd); +} + +static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + __be16 buffer; + int rc, val; + + rc = i2c_master_send(c, &addr, 1); + if (rc != 1) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 1)\n", rc); + + msleep(10); + + rc = i2c_master_recv(c, (char *)&buffer, 2); + if (rc != 2) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 2)\n", rc); + + val = be16_to_cpu(buffer); + + v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val); + + return val; +} + +static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr, + u16 value) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[3]; + int rc; + + buffer[0] = addr; + buffer[1] = value >> 8; + buffer[2] = value & 0xff; + + v4l2_dbg(2, debug, sd, + "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value); + rc = i2c_master_send(c, buffer, 3); + if (rc != 3) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 3)\n", rc); +} + + +struct i2c_reg_value { + unsigned char reg; + u16 value; +}; + +/* + * Values used at the original driver + * Some values are marked as Reserved at the datasheet + */ +static const struct i2c_reg_value mt9v011_init_default[] = { + { R0D_MT9V011_RESET, 0x0001 }, + { R0D_MT9V011_RESET, 0x0000 }, + + { R0C_MT9V011_SHUTTER_DELAY, 0x0000 }, + { R09_MT9V011_SHUTTER_WIDTH, 0x1fc }, + + { R0A_MT9V011_CLK_SPEED, 0x0000 }, + { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 }, + { R20_MT9V011_READ_MODE, 0x1000 }, + + { R07_MT9V011_OUT_CTRL, 0x000a }, /* chip enable */ +}; + +static void set_balance(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + u16 green1_gain, green2_gain, blue_gain, red_gain; + + green1_gain = core->global_gain; + green2_gain = core->global_gain; + + blue_gain = core->global_gain + + core->global_gain * core->blue_bal / (1 << 9); + + red_gain = core->global_gain + + core->global_gain * core->blue_bal / (1 << 9); + + mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain); + mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green1_gain); + mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain); + mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain); +} + +static void set_res(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned vstart, hstart; + + /* + * The mt9v011 doesn't have scaling. So, in order to select the desired + * resolution, we're cropping at the middle of the sensor. + * hblank and vblank should be adjusted, in order to warrant that + * we'll preserve the line timings for 30 fps, no matter what resolution + * is selected. + * NOTE: datasheet says that width (and height) should be filled with + * width-1. However, this doesn't work, since one pixel per line will + * be missing. + */ + + hstart = 14 + (640 - core->width) / 2; + mt9v011_write(sd, R02_MT9V011_COLSTART, hstart); + mt9v011_write(sd, R04_MT9V011_WIDTH, core->width); + mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width); + + vstart = 8 + (640 - core->height) / 2; + mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart); + mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height); + mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height); +}; + +static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++) + mt9v011_write(sd, mt9v011_init_default[i].reg, + mt9v011_init_default[i].value); + + set_balance(sd); + set_res(sd); + + return 0; +}; + +static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + + v4l2_dbg(1, debug, sd, "g_ctrl called\n"); + + switch (ctrl->id) { + case V4L2_CID_GAIN: + ctrl->value = core->global_gain; + return 0; + case V4L2_CID_RED_BALANCE: + ctrl->value = core->red_bal; + return 0; + case V4L2_CID_BLUE_BALANCE: + ctrl->value = core->blue_bal; + return 0; + } + return -EINVAL; +} + +static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + u8 i, n; + n = ARRAY_SIZE(mt9v011_qctrl); + + for (i = 0; i < n; i++) { + if (ctrl->id != mt9v011_qctrl[i].id) + continue; + if (ctrl->value < mt9v011_qctrl[i].minimum || + ctrl->value > mt9v011_qctrl[i].maximum) + return -ERANGE; + v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n", + ctrl->id, ctrl->value); + break; + } + + switch (ctrl->id) { + case V4L2_CID_GAIN: + core->global_gain = ctrl->value; + break; + case V4L2_CID_RED_BALANCE: + core->red_bal = ctrl->value; + break; + case V4L2_CID_BLUE_BALANCE: + core->blue_bal = ctrl->value; + break; + default: + return -EINVAL; + } + + set_balance(sd); + + return 0; +} + +static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt) +{ + if (fmt->index > 0) + return -EINVAL; + + fmt->flags = 0; + strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG"); + fmt->pixelformat = V4L2_PIX_FMT_SGRBG8; + + return 0; +} + +static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8) + return -EINVAL; + + v4l_bound_align_image(&pix->width, 48, 639, 1, + &pix->height, 32, 480, 1, 0); + + return 0; +} + +static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + struct mt9v011 *core = to_mt9v011(sd); + int rc; + + rc = mt9v011_try_fmt(sd, fmt); + if (rc < 0) + return -EINVAL; + + core->width = pix->width; + core->height = pix->height; + + set_res(sd); + + return 0; +} + + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9v011_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + reg->val = mt9v011_read(sd, reg->reg & 0xff); + reg->size = 2; + + return 0; +} + +static int mt9v011_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff); + + return 0; +} +#endif + +static int mt9v011_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011, + MT9V011_VERSION); +} + +static const struct v4l2_subdev_core_ops mt9v011_core_ops = { + .g_ctrl = mt9v011_g_ctrl, + .s_ctrl = mt9v011_s_ctrl, + .reset = mt9v011_reset, + .g_chip_ident = mt9v011_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9v011_g_register, + .s_register = mt9v011_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops mt9v011_video_ops = { + .enum_fmt = mt9v011_enum_fmt, + .try_fmt = mt9v011_try_fmt, + .s_fmt = mt9v011_s_fmt, +}; + +static const struct v4l2_subdev_ops mt9v011_ops = { + .core = &mt9v011_core_ops, + .video = &mt9v011_video_ops, +}; + + +/**************************************************************************** + I2C Client & Driver + ****************************************************************************/ + +static int mt9v011_probe(struct i2c_client *c, + const struct i2c_device_id *id) +{ + u16 version; + struct mt9v011 *core; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(c->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL); + if (!core) + return -ENOMEM; + + sd = &core->sd; + v4l2_i2c_subdev_init(sd, c, &mt9v011_ops); + + /* Check if the sensor is really a MT9V011 */ + version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); + if (version != MT9V011_VERSION) { + v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n", + version); + kfree(core); + return -EINVAL; + } + + core->global_gain = 0x0024; + core->width = 640; + core->height = 480; + + v4l_info(c, "chip found @ 0x%02x (%s)\n", + c->addr << 1, c->adapter->name); + + return 0; +} + +static int mt9v011_remove(struct i2c_client *c) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + + v4l2_dbg(1, debug, sd, + "mt9v011.c: removing mt9v011 adapter on address 0x%x\n", + c->addr << 1); + + v4l2_device_unregister_subdev(sd); + kfree(to_mt9v011(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id mt9v011_id[] = { + { "mt9v011", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9v011_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "mt9v011", + .probe = mt9v011_probe, + .remove = mt9v011_remove, + .id_table = mt9v011_id, +}; diff --git a/drivers/media/video/mt9v011.h b/drivers/media/video/mt9v011.h new file mode 100644 index 000000000000..9e443ee30558 --- /dev/null +++ b/drivers/media/video/mt9v011.h @@ -0,0 +1,35 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#ifndef MT9V011_H_ +#define MT9V011_H_ + +#define R00_MT9V011_CHIP_VERSION 0x00 +#define R01_MT9V011_ROWSTART 0x01 +#define R02_MT9V011_COLSTART 0x02 +#define R03_MT9V011_HEIGHT 0x03 +#define R04_MT9V011_WIDTH 0x04 +#define R05_MT9V011_HBLANK 0x05 +#define R06_MT9V011_VBLANK 0x06 +#define R07_MT9V011_OUT_CTRL 0x07 +#define R09_MT9V011_SHUTTER_WIDTH 0x09 +#define R0A_MT9V011_CLK_SPEED 0x0a +#define R0B_MT9V011_RESTART 0x0b +#define R0C_MT9V011_SHUTTER_DELAY 0x0c +#define R0D_MT9V011_RESET 0x0d +#define R1E_MT9V011_DIGITAL_ZOOM 0x1e +#define R20_MT9V011_READ_MODE 0x20 +#define R2B_MT9V011_GREEN_1_GAIN 0x2b +#define R2C_MT9V011_BLUE_GAIN 0x2c +#define R2D_MT9V011_RED_GAIN 0x2d +#define R2E_MT9V011_GREEN_2_GAIN 0x2e +#define R35_MT9V011_GLOBAL_GAIN 0x35 +#define RF1_MT9V011_CHIP_ENABLE 0xf1 + +#define MT9V011_VERSION 0x8243 + +#endif diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index be20d312b1dc..dbdcc86ae50d 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -364,15 +364,9 @@ static int mt9v022_try_fmt(struct soc_camera_device *icd, { struct v4l2_pix_format *pix = &f->fmt.pix; - if (pix->height < 32 + icd->y_skip_top) - pix->height = 32 + icd->y_skip_top; - if (pix->height > 480 + icd->y_skip_top) - pix->height = 480 + icd->y_skip_top; - if (pix->width < 48) - pix->width = 48; - if (pix->width > 752) - pix->width = 752; - pix->width &= ~0x03; /* ? */ + v4l_bound_align_image(&pix->width, 48, 752, 2 /* ? */, + &pix->height, 32 + icd->y_skip_top, + 480 + icd->y_skip_top, 0, 0); return 0; } diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c index 08cfd3e4ae8a..0bc2cf573c76 100644 --- a/drivers/media/video/ov511.c +++ b/drivers/media/video/ov511.c @@ -211,8 +211,6 @@ static const int i2c_detect_tries = 5; static struct usb_device_id device_table [] = { { USB_DEVICE(VEND_OMNIVISION, PROD_OV511) }, { USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) }, - { USB_DEVICE(VEND_OMNIVISION, PROD_OV518) }, - { USB_DEVICE(VEND_OMNIVISION, PROD_OV518PLUS) }, { USB_DEVICE(VEND_MATTEL, PROD_ME2CAM) }, { } /* Terminating entry */ }; diff --git a/drivers/media/video/pvrusb2/pvrusb2-audio.c b/drivers/media/video/pvrusb2/pvrusb2-audio.c index 10ef1a2c13ea..416933ca607d 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-audio.c +++ b/drivers/media/video/pvrusb2/pvrusb2-audio.c @@ -48,11 +48,13 @@ static const int routing_scheme0[] = { MSP_DSP_IN_SCART), }; -static const struct routing_scheme routing_schemes[] = { - [PVR2_ROUTING_SCHEME_HAUPPAUGE] = { - .def = routing_scheme0, - .cnt = ARRAY_SIZE(routing_scheme0), - }, +static const struct routing_scheme routing_def0 = { + .def = routing_scheme0, + .cnt = ARRAY_SIZE(routing_scheme0), +}; + +static const struct routing_scheme *routing_schemes[] = { + [PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0, }; void pvr2_msp3400_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) @@ -65,7 +67,7 @@ void pvr2_msp3400_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) pvr2_trace(PVR2_TRACE_CHIPS, "subdev msp3400 v4l2 set_stereo"); if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != NULL) && + ((sp = routing_schemes[sid]) != NULL) && (hdw->input_val >= 0) && (hdw->input_val < sp->cnt)) { input = sp->def[hdw->input_val]; diff --git a/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c b/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c index 9023adf3fdcc..68980e19409f 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c +++ b/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c @@ -49,11 +49,13 @@ static const int routing_scheme1[] = { [PVR2_CVAL_INPUT_SVIDEO] = 0, }; -static const struct routing_scheme routing_schemes[] = { - [PVR2_ROUTING_SCHEME_ONAIR] = { - .def = routing_scheme1, - .cnt = ARRAY_SIZE(routing_scheme1), - }, +static const struct routing_scheme routing_def1 = { + .def = routing_scheme1, + .cnt = ARRAY_SIZE(routing_scheme1), +}; + +static const struct routing_scheme *routing_schemes[] = { + [PVR2_ROUTING_SCHEME_ONAIR] = &routing_def1, }; @@ -65,12 +67,11 @@ void pvr2_cs53l32a_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) u32 input; pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_input(%d)", hdw->input_val); - if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != NULL) && - (hdw->input_val >= 0) && - (hdw->input_val < sp->cnt)) { - input = sp->def[hdw->input_val]; - } else { + sp = (sid < ARRAY_SIZE(routing_schemes)) ? + routing_schemes[sid] : NULL; + if ((sp == NULL) || + (hdw->input_val < 0) || + (hdw->input_val >= sp->cnt)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "*** WARNING *** subdev v4l2 set_input:" " Invalid routing scheme (%u)" @@ -78,6 +79,7 @@ void pvr2_cs53l32a_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) sid, hdw->input_val); return; } + input = sp->def[hdw->input_val]; sd->ops->audio->s_routing(sd, input, 0, 0); } } diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c index 05e52358ae49..82c135835753 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c @@ -68,6 +68,11 @@ static const struct routing_scheme_item routing_scheme0[] = { }, }; +static const struct routing_scheme routing_def0 = { + .def = routing_scheme0, + .cnt = ARRAY_SIZE(routing_scheme0), +}; + /* Specific to gotview device */ static const struct routing_scheme_item routing_schemegv[] = { [PVR2_CVAL_INPUT_TV] = { @@ -90,15 +95,14 @@ static const struct routing_scheme_item routing_schemegv[] = { }, }; -static const struct routing_scheme routing_schemes[] = { - [PVR2_ROUTING_SCHEME_HAUPPAUGE] = { - .def = routing_scheme0, - .cnt = ARRAY_SIZE(routing_scheme0), - }, - [PVR2_ROUTING_SCHEME_GOTVIEW] = { - .def = routing_schemegv, - .cnt = ARRAY_SIZE(routing_schemegv), - }, +static const struct routing_scheme routing_defgv = { + .def = routing_schemegv, + .cnt = ARRAY_SIZE(routing_schemegv), +}; + +static const struct routing_scheme *routing_schemes[] = { + [PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0, + [PVR2_ROUTING_SCHEME_GOTVIEW] = &routing_defgv, }; void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) @@ -110,13 +114,11 @@ void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) const struct routing_scheme *sp; unsigned int sid = hdw->hdw_desc->signal_routing_scheme; - if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != NULL) && - (hdw->input_val >= 0) && - (hdw->input_val < sp->cnt)) { - vid_input = sp->def[hdw->input_val].vid; - aud_input = sp->def[hdw->input_val].aud; - } else { + sp = (sid < ARRAY_SIZE(routing_schemes)) ? + routing_schemes[sid] : NULL; + if ((sp == NULL) || + (hdw->input_val < 0) || + (hdw->input_val >= sp->cnt)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "*** WARNING *** subdev cx2584x set_input:" " Invalid routing scheme (%u)" @@ -124,7 +126,8 @@ void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) sid, hdw->input_val); return; } - + vid_input = sp->def[hdw->input_val].vid; + aud_input = sp->def[hdw->input_val].aud; pvr2_trace(PVR2_TRACE_CHIPS, "subdev cx2584x set_input vid=0x%x aud=0x%x", vid_input, aud_input); diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 0c745b142fb7..cbc388729d77 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -85,8 +85,8 @@ MODULE_PARM_DESC(video_std,"specify initial video standard"); module_param_array(tolerance, int, NULL, 0444); MODULE_PARM_DESC(tolerance,"specify stream error tolerance"); -/* US Broadcast channel 7 (175.25 MHz) */ -static int default_tv_freq = 175250000L; +/* US Broadcast channel 3 (61.25 MHz), to help with testing */ +static int default_tv_freq = 61250000L; /* 104.3 MHz, a usable FM station for my area */ static int default_radio_freq = 104300000L; @@ -1987,6 +1987,34 @@ static unsigned int pvr2_copy_i2c_addr_list( } +static void pvr2_hdw_cx25840_vbi_hack(struct pvr2_hdw *hdw) +{ + /* + Mike Isely <isely@pobox.com> 19-Nov-2006 - This bit of nuttiness + for cx25840 causes that module to correctly set up its video + scaling. This is really a problem in the cx25840 module itself, + but we work around it here. The problem has not been seen in + ivtv because there VBI is supported and set up. We don't do VBI + here (at least not yet) and thus we never attempted to even set + it up. + */ + struct v4l2_format fmt; + if (hdw->decoder_client_id != PVR2_CLIENT_ID_CX25840) { + /* We're not using a cx25840 so don't enable the hack */ + return; + } + + pvr2_trace(PVR2_TRACE_INIT, + "Module ID %u:" + " Executing cx25840 VBI hack", + hdw->decoder_client_id); + memset(&fmt, 0, sizeof(fmt)); + fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; + v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id, + video, s_fmt, &fmt); +} + + static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, const struct pvr2_device_client_desc *cd) { @@ -2078,30 +2106,6 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, /* client-specific setup... */ switch (mid) { case PVR2_CLIENT_ID_CX25840: - hdw->decoder_client_id = mid; - { - /* - Mike Isely <isely@pobox.com> 19-Nov-2006 - This - bit of nuttiness for cx25840 causes that module - to correctly set up its video scaling. This is - really a problem in the cx25840 module itself, - but we work around it here. The problem has not - been seen in ivtv because there VBI is supported - and set up. We don't do VBI here (at least not - yet) and thus we never attempted to even set it - up. - */ - struct v4l2_format fmt; - pvr2_trace(PVR2_TRACE_INIT, - "Module ID %u:" - " Executing cx25840 VBI hack", - mid); - memset(&fmt, 0, sizeof(fmt)); - fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; - v4l2_device_call_all(&hdw->v4l2_dev, mid, - video, s_fmt, &fmt); - } - break; case PVR2_CLIENT_ID_SAA7115: hdw->decoder_client_id = mid; break; @@ -2202,6 +2206,8 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) cptr->info->set_value(cptr,~0,cptr->info->default_value); } + pvr2_hdw_cx25840_vbi_hack(hdw); + /* Set up special default values for the television and radio frequencies here. It's not really important what these defaults are, but I set them to something usable in the Chicago area just @@ -2954,6 +2960,7 @@ static void pvr2_subdev_update(struct pvr2_hdw *hdw) vs = hdw->std_mask_cur; v4l2_device_call_all(&hdw->v4l2_dev, 0, core, s_std, vs); + pvr2_hdw_cx25840_vbi_hack(hdw); } hdw->tuner_signal_stale = !0; hdw->cropcap_stale = !0; @@ -4076,6 +4083,7 @@ int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw) if (hdw->decoder_client_id) { v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id, core, reset, 0); + pvr2_hdw_cx25840_vbi_hack(hdw); return 0; } pvr2_trace(PVR2_TRACE_INIT, diff --git a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c index d2fe7c8f2c3a..4c96cf48c796 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c @@ -54,6 +54,11 @@ static const int routing_scheme0[] = { [PVR2_CVAL_INPUT_SVIDEO] = SAA7115_SVIDEO2, }; +static const struct routing_scheme routing_def0 = { + .def = routing_scheme0, + .cnt = ARRAY_SIZE(routing_scheme0), +}; + static const int routing_scheme1[] = { [PVR2_CVAL_INPUT_TV] = SAA7115_COMPOSITE4, [PVR2_CVAL_INPUT_RADIO] = SAA7115_COMPOSITE5, @@ -61,15 +66,14 @@ static const int routing_scheme1[] = { [PVR2_CVAL_INPUT_SVIDEO] = SAA7115_SVIDEO2, /* or SVIDEO0, it seems */ }; -static const struct routing_scheme routing_schemes[] = { - [PVR2_ROUTING_SCHEME_HAUPPAUGE] = { - .def = routing_scheme0, - .cnt = ARRAY_SIZE(routing_scheme0), - }, - [PVR2_ROUTING_SCHEME_ONAIR] = { - .def = routing_scheme1, - .cnt = ARRAY_SIZE(routing_scheme1), - }, +static const struct routing_scheme routing_def1 = { + .def = routing_scheme1, + .cnt = ARRAY_SIZE(routing_scheme1), +}; + +static const struct routing_scheme *routing_schemes[] = { + [PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0, + [PVR2_ROUTING_SCHEME_ONAIR] = &routing_def1, }; void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) @@ -81,12 +85,12 @@ void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_input(%d)", hdw->input_val); - if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != NULL) && - (hdw->input_val >= 0) && - (hdw->input_val < sp->cnt)) { - input = sp->def[hdw->input_val]; - } else { + + sp = (sid < ARRAY_SIZE(routing_schemes)) ? + routing_schemes[sid] : NULL; + if ((sp == NULL) || + (hdw->input_val < 0) || + (hdw->input_val >= sp->cnt)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "*** WARNING *** subdev v4l2 set_input:" " Invalid routing scheme (%u)" @@ -94,6 +98,7 @@ void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) sid, hdw->input_val); return; } + input = sp->def[hdw->input_val]; sd->ops->video->s_routing(sd, input, 0, 0); } } diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index f60de40fd21f..46e0d8ad880f 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -163,13 +163,6 @@ CICR0_EOFM | CICR0_FOM) /* - * YUV422P picture size should be a multiple of 16, so the heuristic aligns - * height, width on 4 byte boundaries to reach the 16 multiple for the size. - */ -#define YUV422P_X_Y_ALIGN 4 -#define YUV422P_SIZE_ALIGN YUV422P_X_Y_ALIGN * YUV422P_X_Y_ALIGN - -/* * Structures */ enum pxa_camera_active_dma { @@ -1398,28 +1391,15 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd, return -EINVAL; } - /* limit to pxa hardware capabilities */ - if (pix->height < 32) - pix->height = 32; - if (pix->height > 2048) - pix->height = 2048; - if (pix->width < 48) - pix->width = 48; - if (pix->width > 2048) - pix->width = 2048; - pix->width &= ~0x01; - /* - * YUV422P planar format requires images size to be a 16 bytes - * multiple. If not, zeros will be inserted between Y and U planes, and - * U and V planes, and YUV422P standard would be violated. + * Limit to pxa hardware capabilities. YUV422P planar format requires + * images size to be a multiple of 16 bytes. If not, zeros will be + * inserted between Y and U planes, and U and V planes, which violates + * the YUV422P standard. */ - if (xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUV422P) { - if (!IS_ALIGNED(pix->width * pix->height, YUV422P_SIZE_ALIGN)) - pix->height = ALIGN(pix->height, YUV422P_X_Y_ALIGN); - if (!IS_ALIGNED(pix->width * pix->height, YUV422P_SIZE_ALIGN)) - pix->width = ALIGN(pix->width, YUV422P_X_Y_ALIGN); - } + v4l_bound_align_image(&pix->width, 48, 2048, 1, + &pix->height, 32, 2048, 0, + xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUV422P ? 4 : 0); pix->bytesperline = pix->width * DIV_ROUND_UP(xlate->host_fmt->depth, 8); diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index e305c1674cee..ba87128542e0 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -1640,15 +1640,8 @@ static int saa7134_try_fmt_vid_cap(struct file *file, void *priv, } f->fmt.pix.field = field; - if (f->fmt.pix.width < 48) - f->fmt.pix.width = 48; - if (f->fmt.pix.height < 32) - f->fmt.pix.height = 32; - if (f->fmt.pix.width > maxw) - f->fmt.pix.width = maxw; - if (f->fmt.pix.height > maxh) - f->fmt.pix.height = maxh; - f->fmt.pix.width &= ~0x03; + v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2, + &f->fmt.pix.height, 32, maxh, 0, 0); f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; f->fmt.pix.sizeimage = diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index d369e8409ab8..0db88a53d92c 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -689,16 +689,8 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, /* FIXME: calculate using depth and bus width */ - if (f->fmt.pix.height < 4) - f->fmt.pix.height = 4; - if (f->fmt.pix.height > 1920) - f->fmt.pix.height = 1920; - if (f->fmt.pix.width < 2) - f->fmt.pix.width = 2; - if (f->fmt.pix.width > 2560) - f->fmt.pix.width = 2560; - f->fmt.pix.width &= ~0x01; - f->fmt.pix.height &= ~0x03; + v4l_bound_align_image(&f->fmt.pix.width, 2, 2560, 1, + &f->fmt.pix.height, 4, 1920, 2, 0); f->fmt.pix.bytesperline = f->fmt.pix.width * DIV_ROUND_UP(xlate->host_fmt->depth, 8); diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 16f595d4337a..9f5ae8167855 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -237,11 +237,11 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd) return -ENOMEM; icd->num_user_formats = fmts; - fmts = 0; dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts); /* Second pass - actually fill data formats */ + fmts = 0; for (i = 0; i < icd->num_formats; i++) if (!ici->ops->get_formats) { icd->user_formats[i].host_fmt = icd->formats + i; @@ -877,8 +877,11 @@ static int soc_camera_probe(struct device *dev) (unsigned short)~0; ret = soc_camera_init_user_formats(icd); - if (ret < 0) + if (ret < 0) { + if (icd->ops->remove) + icd->ops->remove(icd); goto eiufmt; + } icd->height = DEFAULT_HEIGHT; icd->width = DEFAULT_WIDTH; @@ -902,8 +905,10 @@ static int soc_camera_remove(struct device *dev) { struct soc_camera_device *icd = to_soc_camera_dev(dev); + mutex_lock(&icd->video_lock); if (icd->ops->remove) icd->ops->remove(icd); + mutex_unlock(&icd->video_lock); soc_camera_free_user_formats(icd); @@ -1145,6 +1150,7 @@ evidallocd: } EXPORT_SYMBOL(soc_camera_video_start); +/* Called from client .remove() methods with .video_lock held */ void soc_camera_video_stop(struct soc_camera_device *icd) { struct video_device *vdev = icd->vdev; @@ -1154,10 +1160,8 @@ void soc_camera_video_stop(struct soc_camera_device *icd) if (!icd->dev.parent || !vdev) return; - mutex_lock(&icd->video_lock); video_unregister_device(vdev); icd->vdev = NULL; - mutex_unlock(&icd->video_lock); } EXPORT_SYMBOL(soc_camera_video_stop); diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c index b30c49248217..b90e9da3167d 100644 --- a/drivers/media/video/tcm825x.c +++ b/drivers/media/video/tcm825x.c @@ -878,7 +878,7 @@ static int tcm825x_probe(struct i2c_client *client, return rval; } -static int __exit tcm825x_remove(struct i2c_client *client) +static int tcm825x_remove(struct i2c_client *client) { struct tcm825x_sensor *sensor = i2c_get_clientdata(client); @@ -902,7 +902,7 @@ static struct i2c_driver tcm825x_i2c_driver = { .name = TCM825X_NAME, }, .probe = tcm825x_probe, - .remove = __exit_p(tcm825x_remove), + .remove = tcm825x_remove, .id_table = tcm825x_id, }; diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig index e4cb99c1f94b..adb1c044ad7d 100644 --- a/drivers/media/video/usbvideo/Kconfig +++ b/drivers/media/video/usbvideo/Kconfig @@ -38,10 +38,13 @@ config USB_KONICAWC module will be called konicawc. config USB_QUICKCAM_MESSENGER - tristate "USB Logitech Quickcam Messenger" + tristate "USB Logitech Quickcam Messenger (DEPRECATED)" depends on VIDEO_V4L1 select VIDEO_USBVIDEO ---help--- + This driver is DEPRECATED please use the gspca stv06xx module + instead. + Say Y or M here to enable support for the USB Logitech Quickcam Messenger webcam. diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index f96475626da7..b91d66a767d7 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -802,6 +802,17 @@ struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, /* Decrease the module use count to match the first try_module_get. */ module_put(client->driver->driver.owner); + if (sd) { + /* We return errors from v4l2_subdev_call only if we have the + callback as the .s_config is not mandatory */ + int err = v4l2_subdev_call(sd, core, s_config, 0, NULL); + + if (err && err != -ENOIOCTLCMD) { + v4l2_device_unregister_subdev(sd); + sd = NULL; + } + } + error: /* If we have a client but no subdev, then something went wrong and we must unregister the client. */ @@ -852,6 +863,17 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev, /* Decrease the module use count to match the first try_module_get. */ module_put(client->driver->driver.owner); + if (sd) { + /* We return errors from v4l2_subdev_call only if we have the + callback as the .s_config is not mandatory */ + int err = v4l2_subdev_call(sd, core, s_config, 0, NULL); + + if (err && err != -ENOIOCTLCMD) { + v4l2_device_unregister_subdev(sd); + sd = NULL; + } + } + error: /* If we have a client but no subdev, then something went wrong and we must unregister the client. */ @@ -872,6 +894,89 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev } EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev_addr); +/* Load an i2c sub-device. */ +struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, const char *module_name, + struct i2c_board_info *info, const unsigned short *probe_addrs) +{ + struct v4l2_subdev *sd = NULL; + struct i2c_client *client; + + BUG_ON(!v4l2_dev); + + if (module_name) + request_module(module_name); + + /* Create the i2c client */ + if (info->addr == 0 && probe_addrs) + client = i2c_new_probed_device(adapter, info, probe_addrs); + else + client = i2c_new_device(adapter, info); + + /* Note: by loading the module first we are certain that c->driver + will be set if the driver was found. If the module was not loaded + first, then the i2c core tries to delay-load the module for us, + and then c->driver is still NULL until the module is finally + loaded. This delay-load mechanism doesn't work if other drivers + want to use the i2c device, so explicitly loading the module + is the best alternative. */ + if (client == NULL || client->driver == NULL) + goto error; + + /* Lock the module so we can safely get the v4l2_subdev pointer */ + if (!try_module_get(client->driver->driver.owner)) + goto error; + sd = i2c_get_clientdata(client); + + /* Register with the v4l2_device which increases the module's + use count as well. */ + if (v4l2_device_register_subdev(v4l2_dev, sd)) + sd = NULL; + /* Decrease the module use count to match the first try_module_get. */ + module_put(client->driver->driver.owner); + + if (sd) { + /* We return errors from v4l2_subdev_call only if we have the + callback as the .s_config is not mandatory */ + int err = v4l2_subdev_call(sd, core, s_config, + info->irq, info->platform_data); + + if (err && err != -ENOIOCTLCMD) { + v4l2_device_unregister_subdev(sd); + sd = NULL; + } + } + +error: + /* If we have a client but no subdev, then something went wrong and + we must unregister the client. */ + if (client && sd == NULL) + i2c_unregister_device(client); + return sd; +} +EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_board); + +struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, + const char *module_name, const char *client_type, + int irq, void *platform_data, + u8 addr, const unsigned short *probe_addrs) +{ + struct i2c_board_info info; + + /* Setup the i2c board info with the device type and + the device address. */ + memset(&info, 0, sizeof(info)); + strlcpy(info.type, client_type, sizeof(info.type)); + info.addr = addr; + info.irq = irq; + info.platform_data = platform_data; + + return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, module_name, + &info, probe_addrs); +} +EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg); + /* Return i2c client address of v4l2_subdev. */ unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd) { @@ -916,4 +1021,78 @@ const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type) } EXPORT_SYMBOL_GPL(v4l2_i2c_tuner_addrs); -#endif +#endif /* defined(CONFIG_I2C) */ + +/* Clamp x to be between min and max, aligned to a multiple of 2^align. min + * and max don't have to be aligned, but there must be at least one valid + * value. E.g., min=17,max=31,align=4 is not allowed as there are no multiples + * of 16 between 17 and 31. */ +static unsigned int clamp_align(unsigned int x, unsigned int min, + unsigned int max, unsigned int align) +{ + /* Bits that must be zero to be aligned */ + unsigned int mask = ~((1 << align) - 1); + + /* Round to nearest aligned value */ + if (align) + x = (x + (1 << (align - 1))) & mask; + + /* Clamp to aligned value of min and max */ + if (x < min) + x = (min + ~mask) & mask; + else if (x > max) + x = max & mask; + + return x; +} + +/* Bound an image to have a width between wmin and wmax, and height between + * hmin and hmax, inclusive. Additionally, the width will be a multiple of + * 2^walign, the height will be a multiple of 2^halign, and the overall size + * (width*height) will be a multiple of 2^salign. The image may be shrunk + * or enlarged to fit the alignment constraints. + * + * The width or height maximum must not be smaller than the corresponding + * minimum. The alignments must not be so high there are no possible image + * sizes within the allowed bounds. wmin and hmin must be at least 1 + * (don't use 0). If you don't care about a certain alignment, specify 0, + * as 2^0 is 1 and one byte alignment is equivalent to no alignment. If + * you only want to adjust downward, specify a maximum that's the same as + * the initial value. + */ +void v4l_bound_align_image(u32 *w, unsigned int wmin, unsigned int wmax, + unsigned int walign, + u32 *h, unsigned int hmin, unsigned int hmax, + unsigned int halign, unsigned int salign) +{ + *w = clamp_align(*w, wmin, wmax, walign); + *h = clamp_align(*h, hmin, hmax, halign); + + /* Usually we don't need to align the size and are done now. */ + if (!salign) + return; + + /* How much alignment do we have? */ + walign = __ffs(*w); + halign = __ffs(*h); + /* Enough to satisfy the image alignment? */ + if (walign + halign < salign) { + /* Max walign where there is still a valid width */ + unsigned int wmaxa = __fls(wmax ^ (wmin - 1)); + /* Max halign where there is still a valid height */ + unsigned int hmaxa = __fls(hmax ^ (hmin - 1)); + + /* up the smaller alignment until we have enough */ + do { + if (halign >= hmaxa || + (walign <= halign && walign < wmaxa)) { + *w = clamp_align(*w, wmin, wmax, walign + 1); + walign = __ffs(*w); + } else { + *h = clamp_align(*h, hmin, hmax, halign + 1); + halign = __ffs(*h); + } + } while (halign + walign < salign); + } +} +EXPORT_SYMBOL_GPL(v4l_bound_align_image); diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index fbfefae7886f..7705fc6baf00 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -343,6 +343,53 @@ static struct bar_std bars[] = { #define TO_U(r, g, b) \ (((-9714 * r - 19070 * g + 28784 * b + 32768) >> 16) + 128) +/* precalculate color bar values to speed up rendering */ +static void precalculate_bars(struct vivi_fh *fh) +{ + struct vivi_dev *dev = fh->dev; + unsigned char r, g, b; + int k, is_yuv; + + fh->input = dev->input; + + for (k = 0; k < 8; k++) { + r = bars[fh->input].bar[k][0]; + g = bars[fh->input].bar[k][1]; + b = bars[fh->input].bar[k][2]; + is_yuv = 0; + + switch (fh->fmt->fourcc) { + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + is_yuv = 1; + break; + case V4L2_PIX_FMT_RGB565: + case V4L2_PIX_FMT_RGB565X: + r >>= 3; + g >>= 2; + b >>= 3; + break; + case V4L2_PIX_FMT_RGB555: + case V4L2_PIX_FMT_RGB555X: + r >>= 3; + g >>= 3; + b >>= 3; + break; + } + + if (is_yuv) { + fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ + fh->bars[k][1] = TO_U(r, g, b); /* Cb */ + fh->bars[k][2] = TO_V(r, g, b); /* Cr */ + } else { + fh->bars[k][0] = r; + fh->bars[k][1] = g; + fh->bars[k][2] = b; + } + } + +} + #define TSTAMP_MIN_Y 24 #define TSTAMP_MAX_Y (TSTAMP_MIN_Y + 15) #define TSTAMP_INPUT_X 10 @@ -755,6 +802,8 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, buf->vb.height = fh->height; buf->vb.field = field; + precalculate_bars(fh); + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { rc = videobuf_iolock(vq, &buf->vb, NULL); if (rc < 0) @@ -883,15 +932,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, maxh = norm_maxh(); f->fmt.pix.field = field; - if (f->fmt.pix.height < 32) - f->fmt.pix.height = 32; - if (f->fmt.pix.height > maxh) - f->fmt.pix.height = maxh; - if (f->fmt.pix.width < 48) - f->fmt.pix.width = 48; - if (f->fmt.pix.width > maxw) - f->fmt.pix.width = maxw; - f->fmt.pix.width &= ~0x03; + v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2, + &f->fmt.pix.height, 32, maxh, 0, 0); f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; f->fmt.pix.sizeimage = @@ -900,53 +942,6 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return 0; } -/* precalculate color bar values to speed up rendering */ -static void precalculate_bars(struct vivi_fh *fh) -{ - struct vivi_dev *dev = fh->dev; - unsigned char r, g, b; - int k, is_yuv; - - fh->input = dev->input; - - for (k = 0; k < 8; k++) { - r = bars[fh->input].bar[k][0]; - g = bars[fh->input].bar[k][1]; - b = bars[fh->input].bar[k][2]; - is_yuv = 0; - - switch (fh->fmt->fourcc) { - case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_UYVY: - is_yuv = 1; - break; - case V4L2_PIX_FMT_RGB565: - case V4L2_PIX_FMT_RGB565X: - r >>= 3; - g >>= 2; - b >>= 3; - break; - case V4L2_PIX_FMT_RGB555: - case V4L2_PIX_FMT_RGB555X: - r >>= 3; - g >>= 3; - b >>= 3; - break; - } - - if (is_yuv) { - fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ - fh->bars[k][1] = TO_U(r, g, b); /* Cb */ - fh->bars[k][2] = TO_V(r, g, b); /* Cr */ - } else { - fh->bars[k][0] = r; - fh->bars[k][1] = g; - fh->bars[k][2] = b; - } - } - -} - /*FIXME: This seems to be generic enough to be at videodev2 */ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) @@ -972,8 +967,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, fh->vb_vidq.field = f->fmt.pix.field; fh->type = f->type; - precalculate_bars(fh); - ret = 0; out: mutex_unlock(&q->vb_lock); @@ -1364,6 +1357,7 @@ static int __init vivi_create_instance(int inst) goto unreg_dev; *vfd = vivi_template; + vfd->debug = debug; ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); if (ret < 0) diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c index f59b2bd07e89..6c3f23e31b5c 100644 --- a/drivers/media/video/w9968cf.c +++ b/drivers/media/video/w9968cf.c @@ -460,7 +460,7 @@ static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture); static int w9968cf_set_window(struct w9968cf_device*, struct video_window); static int w9968cf_postprocess_frame(struct w9968cf_device*, struct w9968cf_frame_t*); -static int w9968cf_adjust_window_size(struct w9968cf_device*, u16* w, u16* h); +static int w9968cf_adjust_window_size(struct w9968cf_device*, u32 *w, u32 *h); static void w9968cf_init_framelist(struct w9968cf_device*); static void w9968cf_push_frame(struct w9968cf_device*, u8 f_num); static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**); @@ -1763,8 +1763,7 @@ w9968cf_set_window(struct w9968cf_device* cam, struct video_window win) #define UNSC(x) ((x) >> 10) /* Make sure we are using a supported resolution */ - if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width, - (u16*)&win.height))) + if ((err = w9968cf_adjust_window_size(cam, &win.width, &win.height))) goto error; /* Scaling factors */ @@ -1914,12 +1913,9 @@ error: Return 0 on success, -1 otherwise. --------------------------------------------------------------------------*/ static int -w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height) +w9968cf_adjust_window_size(struct w9968cf_device *cam, u32 *width, u32 *height) { - u16 maxw, maxh; - - if ((*width < cam->minwidth) || (*height < cam->minheight)) - return -ERANGE; + unsigned int maxw, maxh, align; maxw = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) && w9968cf_vpp ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth) @@ -1927,16 +1923,10 @@ w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height) maxh = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) && w9968cf_vpp ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight) : cam->maxheight; + align = (cam->vpp_flag & VPP_DECOMPRESSION) ? 4 : 0; - if (*width > maxw) - *width = maxw; - if (*height > maxh) - *height = maxh; - - if (cam->vpp_flag & VPP_DECOMPRESSION) { - *width &= ~15L; /* multiple of 16 */ - *height &= ~15L; - } + v4l_bound_align_image(width, cam->minwidth, maxw, align, + height, cam->minheight, maxh, align, 0); PDBGG("Window size adjusted w=%u, h=%u ", *width, *height) @@ -3043,8 +3033,8 @@ static long w9968cf_v4l_ioctl(struct file *filp, if (win.clipcount != 0 || win.flags != 0) return -EINVAL; - if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width, - (u16*)&win.height))) { + if ((err = w9968cf_adjust_window_size(cam, &win.width, + &win.height))) { DBG(4, "Resolution not supported (%ux%u). " "VIDIOCSWIN failed", win.width, win.height) return err; @@ -3116,6 +3106,7 @@ static long w9968cf_v4l_ioctl(struct file *filp, { struct video_mmap mmap; struct w9968cf_frame_t* fr; + u32 w, h; int err = 0; if (copy_from_user(&mmap, arg, sizeof(mmap))) @@ -3164,8 +3155,10 @@ static long w9968cf_v4l_ioctl(struct file *filp, } } - if ((err = w9968cf_adjust_window_size(cam, (u16*)&mmap.width, - (u16*)&mmap.height))) { + w = mmap.width; h = mmap.height; + err = w9968cf_adjust_window_size(cam, &w, &h); + mmap.width = w; mmap.height = h; + if (err) { DBG(4, "Resolution not supported (%dx%d). " "VIDIOCMCAPTURE failed", mmap.width, mmap.height) diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 643cccaa1aab..3d7df32a3d87 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -2088,16 +2088,10 @@ static int zoran_try_fmt_vid_cap(struct file *file, void *__fh, return -EINVAL; } - bpp = (zoran_formats[i].depth + 7) / 8; - fmt->fmt.pix.width &= ~((bpp == 2) ? 1 : 3); - if (fmt->fmt.pix.width > BUZ_MAX_WIDTH) - fmt->fmt.pix.width = BUZ_MAX_WIDTH; - if (fmt->fmt.pix.width < BUZ_MIN_WIDTH) - fmt->fmt.pix.width = BUZ_MIN_WIDTH; - if (fmt->fmt.pix.height > BUZ_MAX_HEIGHT) - fmt->fmt.pix.height = BUZ_MAX_HEIGHT; - if (fmt->fmt.pix.height < BUZ_MIN_HEIGHT) - fmt->fmt.pix.height = BUZ_MIN_HEIGHT; + bpp = DIV_ROUND_UP(zoran_formats[i].depth, 8); + v4l_bound_align_image( + &fmt->fmt.pix.width, BUZ_MIN_WIDTH, BUZ_MAX_WIDTH, bpp == 2 ? 1 : 2, + &fmt->fmt.pix.height, BUZ_MIN_HEIGHT, BUZ_MAX_HEIGHT, 0, 0); mutex_unlock(&zr->resource_lock); return 0; |