summaryrefslogtreecommitdiff
path: root/drivers/message/fusion/mptbase.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/message/fusion/mptbase.c')
-rw-r--r--drivers/message/fusion/mptbase.c875
1 files changed, 720 insertions, 155 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index b3f28a03b6a9..083acfd91d8b 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -6,7 +6,7 @@
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 1999-2007 LSI Logic Corporation
- * (mailto:mpt_linux_developer@lsil.com)
+ * (mailto:mpt_linux_developer@lsi.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -82,6 +82,10 @@ static int mpt_msi_enable;
module_param(mpt_msi_enable, int, 0);
MODULE_PARM_DESC(mpt_msi_enable, " MSI Support Enable (default=0)");
+static int mpt_channel_mapping;
+module_param(mpt_channel_mapping, int, 0);
+MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
+
#ifdef MFCNT
static int mfcounter = 0;
#define PRINT_MF_COUNT 20000
@@ -173,11 +177,14 @@ static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
//int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers);
-static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
+#ifdef MPT_DEBUG_REPLY
+static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
+#endif
static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info);
static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
+static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
/* module entry point */
static int __init fusion_init (void);
@@ -319,13 +326,11 @@ mpt_reply(MPT_ADAPTER *ioc, u32 pa)
else if (ioc->bus_type == SAS)
mpt_sas_log_info(ioc, log_info);
}
- if (ioc_stat & MPI_IOCSTATUS_MASK) {
- if (ioc->bus_type == SPI &&
- cb_idx != mpt_stm_index &&
- cb_idx != mpt_lan_index)
- mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf);
- }
+#ifdef MPT_DEBUG_REPLY
+ if (ioc_stat & MPI_IOCSTATUS_MASK)
+ mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
+#endif
/* Check for (valid) IO callback! */
if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
@@ -911,7 +916,7 @@ mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
int
mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
{
- int r = 0;
+ int r = 0;
u8 *req_as_bytes;
int ii;
@@ -1811,6 +1816,13 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
* and we try GetLanConfigPages again...
*/
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
+
+ /*
+ * Initalize link list for inactive raid volumes.
+ */
+ init_MUTEX(&ioc->raid_data.inactive_list_mutex);
+ INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
+
if (ioc->bus_type == SAS) {
/* clear persistency table */
@@ -2017,6 +2029,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
}
kfree(ioc->spi_data.nvram);
+ mpt_inactive_raid_list_free(ioc);
+ kfree(ioc->raid_data.pIocPg2);
kfree(ioc->raid_data.pIocPg3);
ioc->spi_data.nvram = NULL;
ioc->raid_data.pIocPg3 = NULL;
@@ -2413,6 +2427,9 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
facts->ProductID = le16_to_cpu(facts->ProductID);
+ if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
+ > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
+ ioc->ir_firmware = 1;
facts->CurrentHostMfaHighAddr =
le32_to_cpu(facts->CurrentHostMfaHighAddr);
facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
@@ -2505,6 +2522,7 @@ GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
int ii;
int req_sz;
int reply_sz;
+ int max_id;
/* IOC *must* NOT be in RESET state! */
if (ioc->last_state == MPI_IOC_STATE_RESET) {
@@ -2552,6 +2570,21 @@ GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
+ max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
+ pfacts->MaxDevices;
+ ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
+ ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
+
+ /*
+ * Place all the devices on channels
+ *
+ * (for debuging)
+ */
+ if (mpt_channel_mapping) {
+ ioc->devices_per_bus = 1;
+ ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
+ }
+
return 0;
}
@@ -2592,13 +2625,8 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
ddlprintk((MYIOC_s_INFO_FMT "upload_fw %d facts.Flags=%x\n",
ioc->name, ioc->upload_fw, ioc->facts.Flags));
- if(ioc->bus_type == SAS)
- ioc_init.MaxDevices = ioc->facts.MaxDevices;
- else if(ioc->bus_type == FC)
- ioc_init.MaxDevices = MPT_MAX_FC_DEVICES;
- else
- ioc_init.MaxDevices = MPT_MAX_SCSI_DEVICES;
- ioc_init.MaxBuses = MPT_MAX_BUS;
+ ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
+ ioc_init.MaxBuses = (U8)ioc->number_of_buses;
dinitprintk((MYIOC_s_INFO_FMT "facts.MsgVersion=%x\n",
ioc->name, ioc->facts.MsgVersion));
if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
@@ -2720,9 +2748,7 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
/* RAID FW may take a long time to enable
*/
- if (((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
- > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) ||
- (ioc->bus_type == SAS)) {
+ if (ioc->ir_firmware || ioc->bus_type == SAS) {
rc = mpt_handshake_req_reply_wait(ioc, req_sz,
(u32*)&port_enable, reply_sz, (u16*)&reply_buf,
300 /*seconds*/, sleepFlag);
@@ -3193,6 +3219,9 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
u32 diag1val = 0;
#endif
+ /* Clear any existing interrupts */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
drsprintk((MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
"address=%p\n", ioc->name, __FUNCTION__,
@@ -3212,7 +3241,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
" count=%d\n",
ioc->name, doorbell, count));
if (doorbell == MPI_IOC_STATE_READY) {
- return 0;
+ return 1;
}
/* wait 1 sec */
@@ -3224,9 +3253,6 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
return -1;
}
- /* Clear any existing interrupts */
- CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
-
/* Use "Diagnostic reset" method! (only thing available!) */
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
@@ -3942,7 +3968,7 @@ WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
}
} else {
while (--cntdn) {
- mdelay (1);
+ udelay (1000);
intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
break;
@@ -3994,7 +4020,7 @@ WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
break;
- mdelay(1);
+ udelay (1000);
count++;
}
}
@@ -4310,8 +4336,8 @@ mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
(reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
- printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d\n",
- ioc->name, disk);
+ printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
+ ioc->name, disk, volume);
} else {
printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
ioc->name, volume);
@@ -4712,7 +4738,187 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
return 0;
}
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_inactive_raid_list_free
+ *
+ * This clears this link list.
+ *
+ * @ioc - pointer to per adapter structure
+ *
+ **/
+static void
+mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
+{
+ struct inactive_raid_component_info *component_info, *pNext;
+
+ if (list_empty(&ioc->raid_data.inactive_list))
+ return;
+
+ down(&ioc->raid_data.inactive_list_mutex);
+ list_for_each_entry_safe(component_info, pNext,
+ &ioc->raid_data.inactive_list, list) {
+ list_del(&component_info->list);
+ kfree(component_info);
+ }
+ up(&ioc->raid_data.inactive_list_mutex);
+}
+
+/**
+ * mpt_inactive_raid_volumes
+ *
+ * This sets up link list of phy_disk_nums for devices belonging in an inactive volume
+ *
+ * @ioc - pointer to per adapter structure
+ * @channel - volume channel
+ * @id - volume target id
+ *
+ *
+ **/
+static void
+mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
+ dma_addr_t dma_handle;
+ pRaidVolumePage0_t buffer = NULL;
+ int i;
+ RaidPhysDiskPage0_t phys_disk;
+ struct inactive_raid_component_info *component_info;
+ int handle_inactive_volumes;
+
+ memset(&cfg, 0 , sizeof(CONFIGPARMS));
+ memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+ hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
+ cfg.pageAddr = (channel << 8) + id;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+ if (mpt_config(ioc, &cfg) != 0)
+ goto out;
+
+ if (!hdr.PageLength)
+ goto out;
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+ &dma_handle);
+
+ if (!buffer)
+ goto out;
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if (mpt_config(ioc, &cfg) != 0)
+ goto out;
+
+ if (!buffer->NumPhysDisks)
+ goto out;
+
+ handle_inactive_volumes =
+ (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
+ (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
+ buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
+ buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
+
+ if (!handle_inactive_volumes)
+ goto out;
+
+ down(&ioc->raid_data.inactive_list_mutex);
+ for (i = 0; i < buffer->NumPhysDisks; i++) {
+ if(mpt_raid_phys_disk_pg0(ioc,
+ buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
+ continue;
+
+ if ((component_info = kmalloc(sizeof (*component_info),
+ GFP_KERNEL)) == NULL)
+ continue;
+
+ component_info->volumeID = id;
+ component_info->volumeBus = channel;
+ component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
+ component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
+ component_info->d.PhysDiskID = phys_disk.PhysDiskID;
+ component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
+
+ list_add_tail(&component_info->list,
+ &ioc->raid_data.inactive_list);
+ }
+ up(&ioc->raid_data.inactive_list_mutex);
+
+ out:
+ if (buffer)
+ pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+ dma_handle);
+}
+
+/**
+ * mpt_raid_phys_disk_pg0 - returns phys disk page zero
+ * @ioc: Pointer to a Adapter Structure
+ * @phys_disk_num: io unit unique phys disk num generated by the ioc
+ * @phys_disk: requested payload data returned
+ *
+ * Return:
+ * 0 on success
+ * -EFAULT if read of config page header fails or data pointer not NULL
+ * -ENOMEM if pci_alloc failed
+ **/
+int
+mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
+ dma_addr_t dma_handle;
+ pRaidPhysDiskPage0_t buffer = NULL;
+ int rc;
+
+ memset(&cfg, 0 , sizeof(CONFIGPARMS));
+ memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+
+ hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+ if (mpt_config(ioc, &cfg) != 0) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ if (!hdr.PageLength) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+ &dma_handle);
+
+ if (!buffer) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ cfg.pageAddr = phys_disk_num;
+
+ if (mpt_config(ioc, &cfg) != 0) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ rc = 0;
+ memcpy(phys_disk, buffer, sizeof(*buffer));
+ phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
+
+ out:
+
+ if (buffer)
+ pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+ dma_handle);
+
+ return rc;
+}
+
/**
* mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
* @ioc: Pointer to a Adapter Strucutre
@@ -4722,21 +4928,27 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
* 0 on success
* -EFAULT if read of config page header fails or data pointer not NULL
* -ENOMEM if pci_alloc failed
- */
+ **/
int
mpt_findImVolumes(MPT_ADAPTER *ioc)
{
IOCPage2_t *pIoc2;
u8 *mem;
- ConfigPageIoc2RaidVol_t *pIocRv;
dma_addr_t ioc2_dma;
CONFIGPARMS cfg;
ConfigPageHeader_t header;
- int jj;
int rc = 0;
int iocpage2sz;
- u8 nVols, nPhys;
- u8 vid, vbus, vioc;
+ int i;
+
+ if (!ioc->ir_firmware)
+ return 0;
+
+ /* Free the old page
+ */
+ kfree(ioc->raid_data.pIocPg2);
+ ioc->raid_data.pIocPg2 = NULL;
+ mpt_inactive_raid_list_free(ioc);
/* Read IOCP2 header then the page.
*/
@@ -4764,55 +4976,23 @@ mpt_findImVolumes(MPT_ADAPTER *ioc)
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
cfg.physAddr = ioc2_dma;
if (mpt_config(ioc, &cfg) != 0)
- goto done_and_free;
+ goto out;
+
+ mem = kmalloc(iocpage2sz, GFP_KERNEL);
+ if (!mem)
+ goto out;
- if ( (mem = (u8 *)ioc->raid_data.pIocPg2) == NULL ) {
- mem = kmalloc(iocpage2sz, GFP_ATOMIC);
- if (mem) {
- ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
- } else {
- goto done_and_free;
- }
- }
memcpy(mem, (u8 *)pIoc2, iocpage2sz);
+ ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
- /* Identify RAID Volume Id's */
- nVols = pIoc2->NumActiveVolumes;
- if ( nVols == 0) {
- /* No RAID Volume.
- */
- goto done_and_free;
- } else {
- /* At least 1 RAID Volume
- */
- pIocRv = pIoc2->RaidVolume;
- ioc->raid_data.isRaid = 0;
- for (jj = 0; jj < nVols; jj++, pIocRv++) {
- vid = pIocRv->VolumeID;
- vbus = pIocRv->VolumeBus;
- vioc = pIocRv->VolumeIOC;
-
- /* find the match
- */
- if (vbus == 0) {
- ioc->raid_data.isRaid |= (1 << vid);
- } else {
- /* Error! Always bus 0
- */
- }
- }
- }
+ mpt_read_ioc_pg_3(ioc);
- /* Identify Hidden Physical Disk Id's */
- nPhys = pIoc2->NumActivePhysDisks;
- if (nPhys == 0) {
- /* No physical disks.
- */
- } else {
- mpt_read_ioc_pg_3(ioc);
- }
+ for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
+ mpt_inactive_raid_volumes(ioc,
+ pIoc2->RaidVolume[i].VolumeBus,
+ pIoc2->RaidVolume[i].VolumeID);
-done_and_free:
+ out:
pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
return rc;
@@ -4865,7 +5045,7 @@ mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
cfg.physAddr = ioc3_dma;
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
if (mpt_config(ioc, &cfg) == 0) {
- mem = kmalloc(iocpage3sz, GFP_ATOMIC);
+ mem = kmalloc(iocpage3sz, GFP_KERNEL);
if (mem) {
memcpy(mem, (u8 *)pIoc3, iocpage3sz);
ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
@@ -5679,8 +5859,6 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
return rc;
}
-# define EVENT_DESCR_STR_SZ 100
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static void
EventDescriptionStr(u8 event, u32 evData0, char *evStr)
@@ -5708,9 +5886,6 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
break;
case MPI_EVENT_RESCAN:
ds = "Bus Rescan Event";
- /* Ok, do we need to do anything here? As far as
- I can tell, this is when a new device gets added
- to the loop. */
break;
case MPI_EVENT_LINK_STATUS_CHANGE:
if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
@@ -5787,48 +5962,63 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
{
u8 id = (u8)(evData0);
+ u8 channel = (u8)(evData0 >> 8);
u8 ReasonCode = (u8)(evData0 >> 16);
switch (ReasonCode) {
case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Added: id=%d", id);
+ "SAS Device Status Change: Added: "
+ "id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Deleted: id=%d", id);
+ "SAS Device Status Change: Deleted: "
+ "id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: SMART Data: id=%d",
- id);
+ "SAS Device Status Change: SMART Data: "
+ "id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: No Persistancy: id=%d", id);
+ "SAS Device Status Change: No Persistancy: "
+ "id=%d channel=%d", id, channel);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Unsupported Device "
+ "Discovered : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Device Reset : id=%d", id);
+ "SAS Device Status Change: Internal Device "
+ "Reset : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Task Abort : id=%d", id);
+ "SAS Device Status Change: Internal Task "
+ "Abort : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Abort Task Set : id=%d", id);
+ "SAS Device Status Change: Internal Abort "
+ "Task Set : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Clear Task Set : id=%d", id);
+ "SAS Device Status Change: Internal Clear "
+ "Task Set : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Query Task : id=%d", id);
+ "SAS Device Status Change: Internal Query "
+ "Task : id=%d channel=%d", id, channel);
break;
default:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Unknown: id=%d", id);
+ "SAS Device Status Change: Unknown: "
+ "id=%d channel=%d", id, channel);
break;
}
break;
@@ -5837,8 +6027,16 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
ds = "Bus Timer Expired";
break;
case MPI_EVENT_QUEUE_FULL:
- ds = "Queue Full";
+ {
+ u16 curr_depth = (u16)(evData0 >> 16);
+ u8 channel = (u8)(evData0 >> 8);
+ u8 id = (u8)(evData0);
+
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "Queue Full: channel=%d id=%d depth=%d",
+ channel, id, curr_depth);
break;
+ }
case MPI_EVENT_SAS_SES:
ds = "SAS SES Event";
break;
@@ -5942,6 +6140,76 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
ds = "SAS Log Entry Added";
break;
+ case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
+ {
+ u8 phy_num = (u8)(evData0);
+ u8 port_num = (u8)(evData0 >> 8);
+ u8 port_width = (u8)(evData0 >> 16);
+ u8 primative = (u8)(evData0 >> 24);
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Broadcase Primative: phy=%d port=%d "
+ "width=%d primative=0x%02x",
+ phy_num, port_num, port_width, primative);
+ break;
+ }
+
+ case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
+ {
+ u8 reason = (u8)(evData0);
+ u8 port_num = (u8)(evData0 >> 8);
+ u16 handle = le16_to_cpu(evData0 >> 16);
+
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Initiator Device Status Change: reason=0x%02x "
+ "port=%d handle=0x%04x",
+ reason, port_num, handle);
+ break;
+ }
+
+ case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
+ {
+ u8 max_init = (u8)(evData0);
+ u8 current_init = (u8)(evData0 >> 8);
+
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Initiator Device Table Overflow: max initiators=%02d "
+ "current initators=%02d",
+ max_init, current_init);
+ break;
+ }
+ case MPI_EVENT_SAS_SMP_ERROR:
+ {
+ u8 status = (u8)(evData0);
+ u8 port_num = (u8)(evData0 >> 8);
+ u8 result = (u8)(evData0 >> 16);
+
+ if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d result=0x%02x",
+ port_num, result);
+ else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : CRC Error",
+ port_num);
+ else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : Timeout",
+ port_num);
+ else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : No Destination",
+ port_num);
+ else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : Bad Destination",
+ port_num);
+ else
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : status=0x%02x",
+ port_num, status);
+ break;
+ }
+
/*
* MPT base "custom" events may be added here...
*/
@@ -6205,10 +6473,11 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
"Abort", /* 12h */
"IO Not Yet Executed", /* 13h */
"IO Executed", /* 14h */
- "Persistent Reservation Out Not Affiliation Owner", /* 15h */
+ "Persistent Reservation Out Not Affiliation "
+ "Owner", /* 15h */
"Open Transmit DMA Abort", /* 16h */
"IO Device Missing Delay Retry", /* 17h */
- NULL, /* 18h */
+ "IO Cancelled Due to Recieve Error", /* 18h */
NULL, /* 19h */
NULL, /* 1Ah */
NULL, /* 1Bh */
@@ -6218,6 +6487,96 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
NULL, /* 1Fh */
"Enclosure Management" /* 20h */
};
+ static char *ir_code_str[] = {
+ "Raid Action Error", /* 00h */
+ NULL, /* 00h */
+ NULL, /* 01h */
+ NULL, /* 02h */
+ NULL, /* 03h */
+ NULL, /* 04h */
+ NULL, /* 05h */
+ NULL, /* 06h */
+ NULL /* 07h */
+ };
+ static char *raid_sub_code_str[] = {
+ NULL, /* 00h */
+ "Volume Creation Failed: Data Passed too "
+ "Large", /* 01h */
+ "Volume Creation Failed: Duplicate Volumes "
+ "Attempted", /* 02h */
+ "Volume Creation Failed: Max Number "
+ "Supported Volumes Exceeded", /* 03h */
+ "Volume Creation Failed: DMA Error", /* 04h */
+ "Volume Creation Failed: Invalid Volume Type", /* 05h */
+ "Volume Creation Failed: Error Reading "
+ "MFG Page 4", /* 06h */
+ "Volume Creation Failed: Creating Internal "
+ "Structures", /* 07h */
+ NULL, /* 08h */
+ NULL, /* 09h */
+ NULL, /* 0Ah */
+ NULL, /* 0Bh */
+ NULL, /* 0Ch */
+ NULL, /* 0Dh */
+ NULL, /* 0Eh */
+ NULL, /* 0Fh */
+ "Activation failed: Already Active Volume", /* 10h */
+ "Activation failed: Unsupported Volume Type", /* 11h */
+ "Activation failed: Too Many Active Volumes", /* 12h */
+ "Activation failed: Volume ID in Use", /* 13h */
+ "Activation failed: Reported Failure", /* 14h */
+ "Activation failed: Importing a Volume", /* 15h */
+ NULL, /* 16h */
+ NULL, /* 17h */
+ NULL, /* 18h */
+ NULL, /* 19h */
+ NULL, /* 1Ah */
+ NULL, /* 1Bh */
+ NULL, /* 1Ch */
+ NULL, /* 1Dh */
+ NULL, /* 1Eh */
+ NULL, /* 1Fh */
+ "Phys Disk failed: Too Many Phys Disks", /* 20h */
+ "Phys Disk failed: Data Passed too Large", /* 21h */
+ "Phys Disk failed: DMA Error", /* 22h */
+ "Phys Disk failed: Invalid <channel:id>", /* 23h */
+ "Phys Disk failed: Creating Phys Disk Config "
+ "Page", /* 24h */
+ NULL, /* 25h */
+ NULL, /* 26h */
+ NULL, /* 27h */
+ NULL, /* 28h */
+ NULL, /* 29h */
+ NULL, /* 2Ah */
+ NULL, /* 2Bh */
+ NULL, /* 2Ch */
+ NULL, /* 2Dh */
+ NULL, /* 2Eh */
+ NULL, /* 2Fh */
+ "Compatibility Error: IR Disabled", /* 30h */
+ "Compatibility Error: Inquiry Comand Failed", /* 31h */
+ "Compatibility Error: Device not Direct Access "
+ "Device ", /* 32h */
+ "Compatibility Error: Removable Device Found", /* 33h */
+ "Compatibility Error: Device SCSI Version not "
+ "2 or Higher", /* 34h */
+ "Compatibility Error: SATA Device, 48 BIT LBA "
+ "not Supported", /* 35h */
+ "Compatibility Error: Device doesn't have "
+ "512 Byte Block Sizes", /* 36h */
+ "Compatibility Error: Volume Type Check Failed", /* 37h */
+ "Compatibility Error: Volume Type is "
+ "Unsupported by FW", /* 38h */
+ "Compatibility Error: Disk Drive too Small for "
+ "use in Volume", /* 39h */
+ "Compatibility Error: Phys Disk for Create "
+ "Volume not Found", /* 3Ah */
+ "Compatibility Error: Too Many or too Few "
+ "Disks for Volume Type", /* 3Bh */
+ "Compatibility Error: Disk stripe Sizes "
+ "Must be 64KB", /* 3Ch */
+ "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
+ };
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
@@ -6226,7 +6585,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
* @log_info: U32 LogInfo reply word from the IOC
*
* Refer to lsi/mpi_log_sas.h.
- */
+ **/
static void
mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info)
{
@@ -6240,56 +6599,165 @@ union loginfo_type {
}dw;
};
union loginfo_type sas_loginfo;
+ char *originator_desc = NULL;
char *code_desc = NULL;
+ char *sub_code_desc = NULL;
sas_loginfo.loginfo = log_info;
if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
(sas_loginfo.dw.originator < sizeof(originator_str)/sizeof(char*)))
return;
- if ((sas_loginfo.dw.originator == 0 /*IOP*/) &&
- (sas_loginfo.dw.code < sizeof(iop_code_str)/sizeof(char*))) {
- code_desc = iop_code_str[sas_loginfo.dw.code];
- }else if ((sas_loginfo.dw.originator == 1 /*PL*/) &&
- (sas_loginfo.dw.code < sizeof(pl_code_str)/sizeof(char*) )) {
- code_desc = pl_code_str[sas_loginfo.dw.code];
+
+ originator_desc = originator_str[sas_loginfo.dw.originator];
+
+ switch (sas_loginfo.dw.originator) {
+
+ case 0: /* IOP */
+ if (sas_loginfo.dw.code <
+ sizeof(iop_code_str)/sizeof(char*))
+ code_desc = iop_code_str[sas_loginfo.dw.code];
+ break;
+ case 1: /* PL */
+ if (sas_loginfo.dw.code <
+ sizeof(pl_code_str)/sizeof(char*))
+ code_desc = pl_code_str[sas_loginfo.dw.code];
+ break;
+ case 2: /* IR */
+ if (sas_loginfo.dw.code >=
+ sizeof(ir_code_str)/sizeof(char*))
+ break;
+ code_desc = ir_code_str[sas_loginfo.dw.code];
+ if (sas_loginfo.dw.subcode >=
+ sizeof(raid_sub_code_str)/sizeof(char*))
+ break;
+ if (sas_loginfo.dw.code == 0)
+ sub_code_desc =
+ raid_sub_code_str[sas_loginfo.dw.subcode];
+ break;
+ default:
+ return;
}
- if (code_desc != NULL)
+ if (sub_code_desc != NULL)
+ printk(MYIOC_s_INFO_FMT
+ "LogInfo(0x%08x): Originator={%s}, Code={%s},"
+ " SubCode={%s}\n",
+ ioc->name, log_info, originator_desc, code_desc,
+ sub_code_desc);
+ else if (code_desc != NULL)
printk(MYIOC_s_INFO_FMT
"LogInfo(0x%08x): Originator={%s}, Code={%s},"
" SubCode(0x%04x)\n",
- ioc->name,
- log_info,
- originator_str[sas_loginfo.dw.originator],
- code_desc,
+ ioc->name, log_info, originator_desc, code_desc,
sas_loginfo.dw.subcode);
else
printk(MYIOC_s_INFO_FMT
"LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
" SubCode(0x%04x)\n",
- ioc->name,
- log_info,
- originator_str[sas_loginfo.dw.originator],
- sas_loginfo.dw.code,
- sas_loginfo.dw.subcode);
+ ioc->name, log_info, originator_desc,
+ sas_loginfo.dw.code, sas_loginfo.dw.subcode);
}
+#ifdef MPT_DEBUG_REPLY
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC.
+ * mpt_iocstatus_info_config - IOCSTATUS information for config pages
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * ioc_status: U32 IOCStatus word from IOC
+ * @mf: Pointer to MPT request frame
+ *
+ * Refer to lsi/mpi.h.
+ **/
+static void
+mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
+{
+ Config_t *pReq = (Config_t *)mf;
+ char extend_desc[EVENT_DESCR_STR_SZ];
+ char *desc = NULL;
+ u32 form;
+ u8 page_type;
+
+ if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
+ page_type = pReq->ExtPageType;
+ else
+ page_type = pReq->Header.PageType;
+
+ /*
+ * ignore invalid page messages for GET_NEXT_HANDLE
+ */
+ form = le32_to_cpu(pReq->PageAddress);
+ if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
+ if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
+ page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
+ page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
+ if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
+ MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
+ return;
+ }
+ if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
+ if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
+ MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
+ return;
+ }
+
+ snprintf(extend_desc, EVENT_DESCR_STR_SZ,
+ "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
+ page_type, pReq->Header.PageNumber, pReq->Action, form);
+
+ switch (ioc_status) {
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
+ desc = "Config Page Invalid Action";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
+ desc = "Config Page Invalid Type";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
+ desc = "Config Page Invalid Page";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
+ desc = "Config Page Invalid Data";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
+ desc = "Config Page No Defaults";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
+ desc = "Config Page Can't Commit";
+ break;
+ }
+
+ if (!desc)
+ return;
+
+ printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04X): %s: %s\n",
+ ioc->name, ioc_status, desc, extend_desc);
+}
+
+/**
+ * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @ioc_status: U32 IOCStatus word from IOC
* @mf: Pointer to MPT request frame
*
* Refer to lsi/mpi.h.
- */
+ **/
static void
-mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
+mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
{
u32 status = ioc_status & MPI_IOCSTATUS_MASK;
char *desc = NULL;
switch (status) {
+
+/****************************************************************************/
+/* Common IOCStatus values for all replies */
+/****************************************************************************/
+
case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
desc = "Invalid Function";
break;
@@ -6322,84 +6790,180 @@ mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
desc = "Invalid State";
break;
+/****************************************************************************/
+/* Config IOCStatus values */
+/****************************************************************************/
+
case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
- /* No message for Config IOCStatus values */
+ mpt_iocstatus_info_config(ioc, status, mf);
break;
+/****************************************************************************/
+/* SCSIIO Reply (SPI, FCP, SAS) initiator values */
+/* */
+/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
+/* */
+/****************************************************************************/
+
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
- /* No message for recovered error
- desc = "SCSI Recovered Error";
- */
+ case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
+ case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
+ case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
+ case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
+ case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
+ case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
+ case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
+ case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
+ case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
+ case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
+ case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
+ case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
break;
- case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
- desc = "SCSI Invalid Bus";
+/****************************************************************************/
+/* SCSI Target values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
+ desc = "Target: Priority IO";
break;
- case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
- desc = "SCSI Invalid TargetID";
+ case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
+ desc = "Target: Invalid Port";
break;
- case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
- {
- SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf;
- U8 cdb = pScsiReq->CDB[0];
- if (cdb != 0x12) { /* Inquiry is issued for device scanning */
- desc = "SCSI Device Not There";
- }
+ case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
+ desc = "Target Invalid IO Index:";
break;
- }
- case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
- desc = "SCSI Data Overrun";
+ case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
+ desc = "Target: Aborted";
break;
- case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
- /* This error is checked in scsi_io_done(). Skip.
- desc = "SCSI Data Underrun";
- */
+ case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
+ desc = "Target: No Conn Retryable";
break;
- case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
- desc = "SCSI I/O Data Error";
+ case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
+ desc = "Target: No Connection";
break;
- case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
- desc = "SCSI Protocol Error";
+ case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
+ desc = "Target: Transfer Count Mismatch";
break;
- case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
- desc = "SCSI Task Terminated";
+ case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
+ desc = "Target: STS Data not Sent";
break;
- case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
- desc = "SCSI Residual Mismatch";
+ case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
+ desc = "Target: Data Offset Error";
break;
- case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
- desc = "SCSI Task Management Failed";
+ case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
+ desc = "Target: Too Much Write Data";
break;
- case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
- desc = "SCSI IOC Terminated";
+ case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
+ desc = "Target: IU Too Short";
break;
- case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
- desc = "SCSI Ext Terminated";
+ case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
+ desc = "Target: ACK NAK Timeout";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
+ desc = "Target: Nak Received";
+ break;
+
+/****************************************************************************/
+/* Fibre Channel Direct Access values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
+ desc = "FC: Aborted";
+ break;
+
+ case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
+ desc = "FC: RX ID Invalid";
+ break;
+
+ case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
+ desc = "FC: DID Invalid";
+ break;
+
+ case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
+ desc = "FC: Node Logged Out";
+ break;
+
+ case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
+ desc = "FC: Exchange Canceled";
+ break;
+
+/****************************************************************************/
+/* LAN values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
+ desc = "LAN: Device not Found";
+ break;
+
+ case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
+ desc = "LAN: Device Failure";
+ break;
+
+ case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
+ desc = "LAN: Transmit Error";
+ break;
+
+ case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
+ desc = "LAN: Transmit Aborted";
+ break;
+
+ case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
+ desc = "LAN: Receive Error";
+ break;
+
+ case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
+ desc = "LAN: Receive Aborted";
+ break;
+
+ case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
+ desc = "LAN: Partial Packet";
+ break;
+
+ case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
+ desc = "LAN: Canceled";
+ break;
+
+/****************************************************************************/
+/* Serial Attached SCSI values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
+ desc = "SAS: SMP Request Failed";
+ break;
+
+ case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
+ desc = "SAS: SMP Data Overrun";
break;
default:
desc = "Others";
break;
}
- if (desc != NULL)
- printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04x): %s\n", ioc->name, status, desc);
+
+ if (!desc)
+ return;
+
+ printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04X): %s\n", ioc->name, status, desc);
}
+#endif
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
EXPORT_SYMBOL(mpt_attach);
@@ -6434,6 +6998,7 @@ EXPORT_SYMBOL(mpt_findImVolumes);
EXPORT_SYMBOL(mpt_alloc_fw_memory);
EXPORT_SYMBOL(mpt_free_fw_memory);
EXPORT_SYMBOL(mptbase_sas_persist_operation);
+EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**