summaryrefslogtreecommitdiff
path: root/drivers/message/fusion
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/message/fusion')
-rw-r--r--drivers/message/fusion/mptbase.c449
-rw-r--r--drivers/message/fusion/mptbase.h28
-rw-r--r--drivers/message/fusion/mptctl.c4
-rw-r--r--drivers/message/fusion/mptfc.c2
-rw-r--r--drivers/message/fusion/mptlan.c7
-rw-r--r--drivers/message/fusion/mptsas.c2
-rw-r--r--drivers/message/fusion/mptscsih.c447
-rw-r--r--drivers/message/fusion/mptscsih.h8
-rw-r--r--drivers/message/fusion/mptspi.c2
9 files changed, 549 insertions, 400 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 14d62d96ca41..790a2932ded9 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -135,7 +135,6 @@ static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
-//static u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked);
static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
@@ -178,6 +177,7 @@ static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *
static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
static void mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info);
+static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info);
/* module entry point */
static int __init fusion_init (void);
@@ -209,6 +209,144 @@ pci_enable_io_access(struct pci_dev *pdev)
pci_write_config_word(pdev, PCI_COMMAND, command_reg);
}
+/*
+ * Process turbo (context) reply...
+ */
+static void
+mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
+{
+ MPT_FRAME_HDR *mf = NULL;
+ MPT_FRAME_HDR *mr = NULL;
+ int req_idx = 0;
+ int cb_idx;
+
+ dmfprintk((MYIOC_s_INFO_FMT "Got TURBO reply req_idx=%08x\n",
+ ioc->name, pa));
+
+ switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
+ case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
+ req_idx = pa & 0x0000FFFF;
+ cb_idx = (pa & 0x00FF0000) >> 16;
+ mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+ break;
+ case MPI_CONTEXT_REPLY_TYPE_LAN:
+ cb_idx = mpt_lan_index;
+ /*
+ * Blind set of mf to NULL here was fatal
+ * after lan_reply says "freeme"
+ * Fix sort of combined with an optimization here;
+ * added explicit check for case where lan_reply
+ * was just returning 1 and doing nothing else.
+ * For this case skip the callback, but set up
+ * proper mf value first here:-)
+ */
+ if ((pa & 0x58000000) == 0x58000000) {
+ req_idx = pa & 0x0000FFFF;
+ mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+ mpt_free_msg_frame(ioc, mf);
+ mb();
+ return;
+ break;
+ }
+ mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
+ break;
+ case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
+ cb_idx = mpt_stm_index;
+ mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
+ break;
+ default:
+ cb_idx = 0;
+ BUG();
+ }
+
+ /* Check for (valid) IO callback! */
+ if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
+ MptCallbacks[cb_idx] == NULL) {
+ printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
+ __FUNCTION__, ioc->name, cb_idx);
+ goto out;
+ }
+
+ if (MptCallbacks[cb_idx](ioc, mf, mr))
+ mpt_free_msg_frame(ioc, mf);
+ out:
+ mb();
+}
+
+static void
+mpt_reply(MPT_ADAPTER *ioc, u32 pa)
+{
+ MPT_FRAME_HDR *mf;
+ MPT_FRAME_HDR *mr;
+ int req_idx;
+ int cb_idx;
+ int freeme;
+
+ u32 reply_dma_low;
+ u16 ioc_stat;
+
+ /* non-TURBO reply! Hmmm, something may be up...
+ * Newest turbo reply mechanism; get address
+ * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
+ */
+
+ /* Map DMA address of reply header to cpu address.
+ * pa is 32 bits - but the dma address may be 32 or 64 bits
+ * get offset based only only the low addresses
+ */
+
+ reply_dma_low = (pa <<= 1);
+ mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
+ (reply_dma_low - ioc->reply_frames_low_dma));
+
+ req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
+ cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
+ mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+
+ dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
+ ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
+ DBG_DUMP_REPLY_FRAME(mr)
+
+ /* Check/log IOC log info
+ */
+ ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
+ if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
+ u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
+ if (ioc->bus_type == FC)
+ mpt_fc_log_info(ioc, log_info);
+ else if (ioc->bus_type == SCSI)
+ mpt_sp_log_info(ioc, log_info);
+ else if (ioc->bus_type == SAS)
+ mpt_sas_log_info(ioc, log_info);
+ }
+ if (ioc_stat & MPI_IOCSTATUS_MASK) {
+ if (ioc->bus_type == SCSI &&
+ cb_idx != mpt_stm_index &&
+ cb_idx != mpt_lan_index)
+ mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf);
+ }
+
+
+ /* Check for (valid) IO callback! */
+ if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
+ MptCallbacks[cb_idx] == NULL) {
+ printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
+ __FUNCTION__, ioc->name, cb_idx);
+ freeme = 0;
+ goto out;
+ }
+
+ freeme = MptCallbacks[cb_idx](ioc, mf, mr);
+
+ out:
+ /* Flush (non-TURBO) reply with a WRITE! */
+ CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
+
+ if (freeme)
+ mpt_free_msg_frame(ioc, mf);
+ mb();
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
@@ -230,164 +368,21 @@ pci_enable_io_access(struct pci_dev *pdev)
static irqreturn_t
mpt_interrupt(int irq, void *bus_id, struct pt_regs *r)
{
- MPT_ADAPTER *ioc;
- MPT_FRAME_HDR *mf;
- MPT_FRAME_HDR *mr;
- u32 pa;
- int req_idx;
- int cb_idx;
- int type;
- int freeme;
-
- ioc = (MPT_ADAPTER *)bus_id;
+ MPT_ADAPTER *ioc = bus_id;
+ u32 pa;
/*
* Drain the reply FIFO!
- *
- * NOTES: I've seen up to 10 replies processed in this loop, so far...
- * Update: I've seen up to 9182 replies processed in this loop! ??
- * Update: Limit ourselves to processing max of N replies
- * (bottom of loop).
*/
while (1) {
-
- if ((pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo)) == 0xFFFFFFFF)
+ pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
+ if (pa == 0xFFFFFFFF)
return IRQ_HANDLED;
-
- cb_idx = 0;
- freeme = 0;
-
- /*
- * Check for non-TURBO reply!
- */
- if (pa & MPI_ADDRESS_REPLY_A_BIT) {
- u32 reply_dma_low;
- u16 ioc_stat;
-
- /* non-TURBO reply! Hmmm, something may be up...
- * Newest turbo reply mechanism; get address
- * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
- */
-
- /* Map DMA address of reply header to cpu address.
- * pa is 32 bits - but the dma address may be 32 or 64 bits
- * get offset based only only the low addresses
- */
- reply_dma_low = (pa = (pa << 1));
- mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
- (reply_dma_low - ioc->reply_frames_low_dma));
-
- req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
- cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
- mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
-
- dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
- ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
- DBG_DUMP_REPLY_FRAME(mr)
-
- /* Check/log IOC log info
- */
- ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
- if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
- u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
- if (ioc->bus_type == FC)
- mpt_fc_log_info(ioc, log_info);
- else if (ioc->bus_type == SCSI)
- mpt_sp_log_info(ioc, log_info);
- }
- if (ioc_stat & MPI_IOCSTATUS_MASK) {
- if (ioc->bus_type == SCSI)
- mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf);
- }
- } else {
- /*
- * Process turbo (context) reply...
- */
- dmfprintk((MYIOC_s_INFO_FMT "Got TURBO reply req_idx=%08x\n", ioc->name, pa));
- type = (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT);
- if (type == MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET) {
- cb_idx = mpt_stm_index;
- mf = NULL;
- mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
- } else if (type == MPI_CONTEXT_REPLY_TYPE_LAN) {
- cb_idx = mpt_lan_index;
- /* Blind set of mf to NULL here was fatal
- * after lan_reply says "freeme"
- * Fix sort of combined with an optimization here;
- * added explicit check for case where lan_reply
- * was just returning 1 and doing nothing else.
- * For this case skip the callback, but set up
- * proper mf value first here:-)
- */
- if ((pa & 0x58000000) == 0x58000000) {
- req_idx = pa & 0x0000FFFF;
- mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
- freeme = 1;
- /*
- * IMPORTANT! Invalidate the callback!
- */
- cb_idx = 0;
- } else {
- mf = NULL;
- }
- mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
- } else {
- req_idx = pa & 0x0000FFFF;
- cb_idx = (pa & 0x00FF0000) >> 16;
- mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
- mr = NULL;
- }
- pa = 0; /* No reply flush! */
- }
-
-#ifdef MPT_DEBUG_IRQ
- if (ioc->bus_type == SCSI) {
- /* Verify mf, mr are reasonable.
- */
- if ((mf) && ((mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))
- || (mf < ioc->req_frames)) ) {
- printk(MYIOC_s_WARN_FMT
- "mpt_interrupt: Invalid mf (%p)!\n", ioc->name, (void *)mf);
- cb_idx = 0;
- pa = 0;
- freeme = 0;
- }
- if ((pa) && (mr) && ((mr >= MPT_INDEX_2_RFPTR(ioc, ioc->req_depth))
- || (mr < ioc->reply_frames)) ) {
- printk(MYIOC_s_WARN_FMT
- "mpt_interrupt: Invalid rf (%p)!\n", ioc->name, (void *)mr);
- cb_idx = 0;
- pa = 0;
- freeme = 0;
- }
- if (cb_idx > (MPT_MAX_PROTOCOL_DRIVERS-1)) {
- printk(MYIOC_s_WARN_FMT
- "mpt_interrupt: Invalid cb_idx (%d)!\n", ioc->name, cb_idx);
- cb_idx = 0;
- pa = 0;
- freeme = 0;
- }
- }
-#endif
-
- /* Check for (valid) IO callback! */
- if (cb_idx) {
- /* Do the callback! */
- freeme = (*(MptCallbacks[cb_idx]))(ioc, mf, mr);
- }
-
- if (pa) {
- /* Flush (non-TURBO) reply with a WRITE! */
- CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
- }
-
- if (freeme) {
- /* Put Request back on FreeQ! */
- mpt_free_msg_frame(ioc, mf);
- }
-
- mb();
- } /* drain reply FIFO */
+ else if (pa & MPI_ADDRESS_REPLY_A_BIT)
+ mpt_reply(ioc, pa);
+ else
+ mpt_turbo_reply(ioc, pa);
+ }
return IRQ_HANDLED;
}
@@ -1065,7 +1060,7 @@ mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
ioc->name,
ioc->HostPageBuffer,
ioc->HostPageBuffer_dma,
- hst_page_buffer_sz));
+ host_page_buffer_sz));
ioc->alloc_total += host_page_buffer_sz;
ioc->HostPageBuffer_sz = host_page_buffer_sz;
break;
@@ -1208,7 +1203,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
/* Initilize SCSI Config Data structure
*/
- memset(&ioc->spi_data, 0, sizeof(ScsiCfgData));
+ memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
/* Initialize the running configQ head.
*/
@@ -1755,8 +1750,23 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
*/
if (ret == 0) {
rc = mpt_do_upload(ioc, sleepFlag);
- if (rc != 0)
+ if (rc == 0) {
+ if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
+ /*
+ * Maintain only one pointer to FW memory
+ * so there will not be two attempt to
+ * downloadboot onboard dual function
+ * chips (mpt_adapter_disable,
+ * mpt_diag_reset)
+ */
+ ioc->cached_fw = NULL;
+ ddlprintk((MYIOC_s_INFO_FMT ": mpt_upload: alt_%s has cached_fw=%p \n",
+ ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
+ }
+ } else {
printk(KERN_WARNING MYNAM ": firmware upload failure!\n");
+ ret = -5;
+ }
}
}
}
@@ -1997,9 +2007,9 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
}
kfree(ioc->spi_data.nvram);
- kfree(ioc->spi_data.pIocPg3);
+ kfree(ioc->raid_data.pIocPg3);
ioc->spi_data.nvram = NULL;
- ioc->spi_data.pIocPg3 = NULL;
+ ioc->raid_data.pIocPg3 = NULL;
if (ioc->spi_data.pIocPg4 != NULL) {
sz = ioc->spi_data.IocPg4Sz;
@@ -3852,7 +3862,7 @@ WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
int count = 0;
u32 intstat=0;
- cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * howlong;
+ cntdn = 1000 * howlong;
if (sleepFlag == CAN_SLEEP) {
while (--cntdn) {
@@ -3902,7 +3912,7 @@ WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
int count = 0;
u32 intstat=0;
- cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * howlong;
+ cntdn = 1000 * howlong;
if (sleepFlag == CAN_SLEEP) {
while (--cntdn) {
intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
@@ -4634,10 +4644,10 @@ mpt_findImVolumes(MPT_ADAPTER *ioc)
if (mpt_config(ioc, &cfg) != 0)
goto done_and_free;
- if ( (mem = (u8 *)ioc->spi_data.pIocPg2) == NULL ) {
+ if ( (mem = (u8 *)ioc->raid_data.pIocPg2) == NULL ) {
mem = kmalloc(iocpage2sz, GFP_ATOMIC);
if (mem) {
- ioc->spi_data.pIocPg2 = (IOCPage2_t *) mem;
+ ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
} else {
goto done_and_free;
}
@@ -4654,7 +4664,7 @@ mpt_findImVolumes(MPT_ADAPTER *ioc)
/* At least 1 RAID Volume
*/
pIocRv = pIoc2->RaidVolume;
- ioc->spi_data.isRaid = 0;
+ ioc->raid_data.isRaid = 0;
for (jj = 0; jj < nVols; jj++, pIocRv++) {
vid = pIocRv->VolumeID;
vbus = pIocRv->VolumeBus;
@@ -4663,7 +4673,7 @@ mpt_findImVolumes(MPT_ADAPTER *ioc)
/* find the match
*/
if (vbus == 0) {
- ioc->spi_data.isRaid |= (1 << vid);
+ ioc->raid_data.isRaid |= (1 << vid);
} else {
/* Error! Always bus 0
*/
@@ -4698,8 +4708,8 @@ mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
/* Free the old page
*/
- kfree(ioc->spi_data.pIocPg3);
- ioc->spi_data.pIocPg3 = NULL;
+ kfree(ioc->raid_data.pIocPg3);
+ ioc->raid_data.pIocPg3 = NULL;
/* There is at least one physical disk.
* Read and save IOC Page 3
@@ -4736,7 +4746,7 @@ mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
mem = kmalloc(iocpage3sz, GFP_ATOMIC);
if (mem) {
memcpy(mem, (u8 *)pIoc3, iocpage3sz);
- ioc->spi_data.pIocPg3 = (IOCPage3_t *) mem;
+ ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
}
}
@@ -6022,6 +6032,111 @@ mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info)
printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
}
+/* strings for sas loginfo */
+ static char *originator_str[] = {
+ "IOP", /* 00h */
+ "PL", /* 01h */
+ "IR" /* 02h */
+ };
+ static char *iop_code_str[] = {
+ NULL, /* 00h */
+ "Invalid SAS Address", /* 01h */
+ NULL, /* 02h */
+ "Invalid Page", /* 03h */
+ NULL, /* 04h */
+ "Task Terminated" /* 05h */
+ };
+ static char *pl_code_str[] = {
+ NULL, /* 00h */
+ "Open Failure", /* 01h */
+ "Invalid Scatter Gather List", /* 02h */
+ "Wrong Relative Offset or Frame Length", /* 03h */
+ "Frame Transfer Error", /* 04h */
+ "Transmit Frame Connected Low", /* 05h */
+ "SATA Non-NCQ RW Error Bit Set", /* 06h */
+ "SATA Read Log Receive Data Error", /* 07h */
+ "SATA NCQ Fail All Commands After Error", /* 08h */
+ "SATA Error in Receive Set Device Bit FIS", /* 09h */
+ "Receive Frame Invalid Message", /* 0Ah */
+ "Receive Context Message Valid Error", /* 0Bh */
+ "Receive Frame Current Frame Error", /* 0Ch */
+ "SATA Link Down", /* 0Dh */
+ "Discovery SATA Init W IOS", /* 0Eh */
+ "Config Invalid Page", /* 0Fh */
+ "Discovery SATA Init Timeout", /* 10h */
+ "Reset", /* 11h */
+ "Abort", /* 12h */
+ "IO Not Yet Executed", /* 13h */
+ "IO Executed", /* 14h */
+ NULL, /* 15h */
+ NULL, /* 16h */
+ NULL, /* 17h */
+ NULL, /* 18h */
+ NULL, /* 19h */
+ NULL, /* 1Ah */
+ NULL, /* 1Bh */
+ NULL, /* 1Ch */
+ NULL, /* 1Dh */
+ NULL, /* 1Eh */
+ NULL, /* 1Fh */
+ "Enclosure Management" /* 20h */
+ };
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_sas_log_info - Log information returned from SAS IOC.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @log_info: U32 LogInfo reply word from the IOC
+ *
+ * Refer to lsi/mpi_log_sas.h.
+ */
+static void
+mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info)
+{
+union loginfo_type {
+ u32 loginfo;
+ struct {
+ u32 subcode:16;
+ u32 code:8;
+ u32 originator:4;
+ u32 bus_type:4;
+ }dw;
+};
+ union loginfo_type sas_loginfo;
+ char *code_desc = NULL;
+
+ sas_loginfo.loginfo = log_info;
+ if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
+ (sas_loginfo.dw.originator < sizeof(originator_str)/sizeof(char*)))
+ return;
+ if ((sas_loginfo.dw.originator == 0 /*IOP*/) &&
+ (sas_loginfo.dw.code < sizeof(iop_code_str)/sizeof(char*))) {
+ code_desc = iop_code_str[sas_loginfo.dw.code];
+ }else if ((sas_loginfo.dw.originator == 1 /*PL*/) &&
+ (sas_loginfo.dw.code < sizeof(pl_code_str)/sizeof(char*) )) {
+ code_desc = pl_code_str[sas_loginfo.dw.code];
+ }
+
+ if (code_desc != NULL)
+ printk(MYIOC_s_INFO_FMT
+ "LogInfo(0x%08x): Originator={%s}, Code={%s},"
+ " SubCode(0x%04x)\n",
+ ioc->name,
+ log_info,
+ originator_str[sas_loginfo.dw.originator],
+ code_desc,
+ sas_loginfo.dw.subcode);
+ else
+ printk(MYIOC_s_INFO_FMT
+ "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
+ " SubCode(0x%04x)\n",
+ ioc->name,
+ log_info,
+ originator_str[sas_loginfo.dw.originator],
+ sas_loginfo.dw.code,
+ sas_loginfo.dw.subcode);
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC.
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index bbd21d74ce5c..75105277e22f 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -77,8 +77,8 @@
#define COPYRIGHT "Copyright (c) 1999-2005 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.03.02"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.02"
+#define MPT_LINUX_VERSION_COMMON "3.03.03"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.03"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
@@ -424,7 +424,7 @@ typedef struct _MPT_IOCTL {
/*
* Event Structure and define
*/
-#define MPTCTL_EVENT_LOG_SIZE (0x0000000A)
+#define MPTCTL_EVENT_LOG_SIZE (0x000000032)
typedef struct _mpt_ioctl_events {
u32 event; /* Specified by define above */
u32 eventContext; /* Index or counter */
@@ -452,16 +452,13 @@ typedef struct _mpt_ioctl_events {
#define MPT_SCSICFG_ALL_IDS 0x02 /* WriteSDP1 to all IDS */
/* #define MPT_SCSICFG_BLK_NEGO 0x10 WriteSDP1 with WDTR and SDTR disabled */
-typedef struct _ScsiCfgData {
+typedef struct _SpiCfgData {
u32 PortFlags;
int *nvram; /* table of device NVRAM values */
- IOCPage2_t *pIocPg2; /* table of Raid Volumes */
- IOCPage3_t *pIocPg3; /* table of physical disks */
IOCPage4_t *pIocPg4; /* SEP devices addressing */
dma_addr_t IocPg4_dma; /* Phys Addr of IOCPage4 data */
int IocPg4Sz; /* IOCPage4 size */
u8 dvStatus[MPT_MAX_SCSI_DEVICES];
- int isRaid; /* bit field, 1 if RAID */
u8 minSyncFactor; /* 0xFF if async */
u8 maxSyncOffset; /* 0 if async */
u8 maxBusWidth; /* 0 if narrow, 1 if wide */
@@ -473,10 +470,14 @@ typedef struct _ScsiCfgData {
u8 dvScheduled; /* 1 if scheduled */
u8 forceDv; /* 1 to force DV scheduling */
u8 noQas; /* Disable QAS for this adapter */
- u8 Saf_Te; /* 1 to force all Processors as SAF-TE if Inquiry data length is too short to check for SAF-TE */
+ u8 Saf_Te; /* 1 to force all Processors as
+ * SAF-TE if Inquiry data length
+ * is too short to check for SAF-TE
+ */
u8 mpt_dv; /* command line option: enhanced=1, basic=0 */
+ u8 bus_reset; /* 1 to allow bus reset */
u8 rsvd[1];
-} ScsiCfgData;
+}SpiCfgData;
typedef struct _SasCfgData {
u8 ptClear; /* 1 to automatically clear the
@@ -486,6 +487,12 @@ typedef struct _SasCfgData {
*/
}SasCfgData;
+typedef struct _RaidCfgData {
+ IOCPage2_t *pIocPg2; /* table of Raid Volumes */
+ IOCPage3_t *pIocPg3; /* table of physical disks */
+ int isRaid; /* bit field, 1 if RAID */
+}RaidCfgData;
+
/*
* Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS
*/
@@ -546,7 +553,8 @@ typedef struct _MPT_ADAPTER
struct pci_dev *pcidev; /* struct pci_dev pointer */
u8 __iomem *memmap; /* mmap address */
struct Scsi_Host *sh; /* Scsi Host pointer */
- ScsiCfgData spi_data; /* Scsi config. data */
+ SpiCfgData spi_data; /* Scsi config. data */
+ RaidCfgData raid_data; /* Raid config. data */
SasCfgData sas_data; /* Sas config. data */
MPT_IOCTL *ioctl; /* ioctl data pointer */
struct proc_dir_entry *ioc_dentry;
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 7577c2417e2e..cb2d59d5f5af 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -1326,7 +1326,7 @@ mptctl_gettargetinfo (unsigned long arg)
*/
if (hd && hd->Targets) {
mpt_findImVolumes(ioc);
- pIoc2 = ioc->spi_data.pIocPg2;
+ pIoc2 = ioc->raid_data.pIocPg2;
for ( id = 0; id <= max_id; ) {
if ( pIoc2 && pIoc2->NumActiveVolumes ) {
if ( id == pIoc2->RaidVolume[0].VolumeID ) {
@@ -1348,7 +1348,7 @@ mptctl_gettargetinfo (unsigned long arg)
--maxWordsLeft;
goto next_id;
} else {
- pIoc3 = ioc->spi_data.pIocPg3;
+ pIoc3 = ioc->raid_data.pIocPg3;
for ( jj = 0; jj < pIoc3->NumPhysDisks; jj++ ) {
if ( pIoc3->PhysDisk[jj].PhysDiskID == id )
goto next_id;
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index 13771abea13f..a628be9bbbad 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -189,7 +189,7 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
printk(MYIOC_s_WARN_FMT
"Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n",
ioc->name, ioc);
- return -ENODEV;
+ return 0;
}
sh = scsi_host_alloc(&mptfc_driver_template, sizeof(MPT_SCSI_HOST));
diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
index 52794be5a95c..ed3c891e388f 100644
--- a/drivers/message/fusion/mptlan.c
+++ b/drivers/message/fusion/mptlan.c
@@ -312,7 +312,12 @@ static int
mpt_lan_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
{
struct net_device *dev = ioc->netdev;
- struct mpt_lan_priv *priv = netdev_priv(dev);
+ struct mpt_lan_priv *priv;
+
+ if (dev == NULL)
+ return(1);
+ else
+ priv = netdev_priv(dev);
dlprintk((KERN_INFO MYNAM ": IOC %s_reset routed to LAN driver!\n",
reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 0d9a192e1bd4..429820e48c69 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -980,7 +980,7 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
printk(MYIOC_s_WARN_FMT
"Skipping ioc=%p because SCSI Initiator mode "
"is NOT enabled!\n", ioc->name, ioc);
- return -ENODEV;
+ return 0;
}
sh = scsi_host_alloc(&mptsas_driver_template, sizeof(MPT_SCSI_HOST));
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 58b5fdee009a..8dd25aac5355 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -93,8 +93,9 @@ typedef struct _BIG_SENSE_BUF {
#define MPT_ICFLAG_BUF_CAP 0x01 /* ReadBuffer Read Capacity format */
#define MPT_ICFLAG_ECHO 0x02 /* ReadBuffer Echo buffer format */
-#define MPT_ICFLAG_PHYS_DISK 0x04 /* Any SCSI IO but do Phys Disk Format */
-#define MPT_ICFLAG_TAGGED_CMD 0x08 /* Do tagged IO */
+#define MPT_ICFLAG_EBOS 0x04 /* ReadBuffer Echo buffer has EBOS */
+#define MPT_ICFLAG_PHYS_DISK 0x08 /* Any SCSI IO but do Phys Disk Format */
+#define MPT_ICFLAG_TAGGED_CMD 0x10 /* Do tagged IO */
#define MPT_ICFLAG_DID_RESET 0x20 /* Bus Reset occurred with this command */
#define MPT_ICFLAG_RESERVED 0x40 /* Reserved has been issued */
@@ -159,6 +160,8 @@ int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR
static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
static int mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum);
+static struct work_struct mptscsih_persistTask;
+
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
static int mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io);
static void mptscsih_domainValidation(void *hd);
@@ -167,6 +170,7 @@ static void mptscsih_qas_check(MPT_SCSI_HOST *hd, int id);
static int mptscsih_doDv(MPT_SCSI_HOST *hd, int channel, int target);
static void mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage);
static void mptscsih_fillbuf(char *buffer, int size, int index, int width);
+static void mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id);
#endif
void mptscsih_remove(struct pci_dev *);
@@ -606,11 +610,24 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
xfer_cnt = le32_to_cpu(pScsiReply->TransferCount);
sc->resid = sc->request_bufflen - xfer_cnt;
+ /*
+ * if we get a data underrun indication, yet no data was
+ * transferred and the SCSI status indicates that the
+ * command was never started, change the data underrun
+ * to success
+ */
+ if (status == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
+ (scsi_status == MPI_SCSI_STATUS_BUSY ||
+ scsi_status == MPI_SCSI_STATUS_RESERVATION_CONFLICT ||
+ scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)) {
+ status = MPI_IOCSTATUS_SUCCESS;
+ }
+
dreplyprintk((KERN_NOTICE "Reply ha=%d id=%d lun=%d:\n"
"IOCStatus=%04xh SCSIState=%02xh SCSIStatus=%02xh\n"
"resid=%d bufflen=%d xfer_cnt=%d\n",
ioc->id, pScsiReq->TargetID, pScsiReq->LUN[1],
- status, scsi_state, scsi_status, sc->resid,
+ status, scsi_state, scsi_status, sc->resid,
sc->request_bufflen, xfer_cnt));
if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)
@@ -619,8 +636,11 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
/*
* Look for + dump FCP ResponseInfo[]!
*/
- if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID) {
- printk(KERN_NOTICE " FCP_ResponseInfo=%08xh\n",
+ if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
+ pScsiReply->ResponseInfo) {
+ printk(KERN_NOTICE "ha=%d id=%d lun=%d: "
+ "FCP_ResponseInfo=%08xh\n",
+ ioc->id, pScsiReq->TargetID, pScsiReq->LUN[1],
le32_to_cpu(pScsiReply->ResponseInfo));
}
@@ -661,23 +681,13 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
break;
case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
- if ( xfer_cnt >= sc->underflow ) {
- /* Sufficient data transfer occurred */
+ sc->resid = sc->request_bufflen - xfer_cnt;
+ if((xfer_cnt==0)||(sc->underflow > xfer_cnt))
+ sc->result=DID_SOFT_ERROR << 16;
+ else /* Sufficient data transfer occurred */
sc->result = (DID_OK << 16) | scsi_status;
- } else if ( xfer_cnt == 0 ) {
- /* A CRC Error causes this condition; retry */
- sc->result = (DRIVER_SENSE << 24) | (DID_OK << 16) |
- (CHECK_CONDITION << 1);
- sc->sense_buffer[0] = 0x70;
- sc->sense_buffer[2] = NO_SENSE;
- sc->sense_buffer[12] = 0;
- sc->sense_buffer[13] = 0;
- } else {
- sc->result = DID_SOFT_ERROR << 16;
- }
- dreplyprintk((KERN_NOTICE
- "RESIDUAL_MISMATCH: result=%x on id=%d\n",
- sc->result, sc->device->id));
+ dreplyprintk((KERN_NOTICE
+ "RESIDUAL_MISMATCH: result=%x on id=%d\n", sc->result, sc->device->id));
break;
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
@@ -692,7 +702,10 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
;
} else {
if (xfer_cnt < sc->underflow) {
- sc->result = DID_SOFT_ERROR << 16;
+ if (scsi_status == SAM_STAT_BUSY)
+ sc->result = SAM_STAT_BUSY;
+ else
+ sc->result = DID_SOFT_ERROR << 16;
}
if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) {
/* What to do?
@@ -717,8 +730,10 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
- scsi_status = pScsiReply->SCSIStatus;
- sc->result = (DID_OK << 16) | scsi_status;
+ if (scsi_status == MPI_SCSI_STATUS_BUSY)
+ sc->result = (DID_BUS_BUSY << 16) | scsi_status;
+ else
+ sc->result = (DID_OK << 16) | scsi_status;
if (scsi_state == 0) {
;
} else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
@@ -890,12 +905,13 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun)
SCSIIORequest_t *mf = NULL;
int ii;
int max = hd->ioc->req_depth;
+ struct scsi_cmnd *sc;
dsprintk((KERN_INFO MYNAM ": search_running target %d lun %d max %d\n",
target, lun, max));
for (ii=0; ii < max; ii++) {
- if (hd->ScsiLookup[ii] != NULL) {
+ if ((sc = hd->ScsiLookup[ii]) != NULL) {
mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(hd->ioc, ii);
@@ -910,9 +926,22 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun)
hd->ScsiLookup[ii] = NULL;
mptscsih_freeChainBuffers(hd->ioc, ii);
mpt_free_msg_frame(hd->ioc, (MPT_FRAME_HDR *)mf);
+ if (sc->use_sg) {
+ pci_unmap_sg(hd->ioc->pcidev,
+ (struct scatterlist *) sc->request_buffer,
+ sc->use_sg,
+ sc->sc_data_direction);
+ } else if (sc->request_bufflen) {
+ pci_unmap_single(hd->ioc->pcidev,
+ sc->SCp.dma_handle,
+ sc->request_bufflen,
+ sc->sc_data_direction);
+ }
+ sc->host_scribble = NULL;
+ sc->result = DID_NO_CONNECT << 16;
+ sc->scsi_done(sc);
}
}
-
return;
}
@@ -967,8 +996,10 @@ mptscsih_remove(struct pci_dev *pdev)
unsigned long flags;
int sz1;
- if(!host)
+ if(!host) {
+ mpt_detach(pdev);
return;
+ }
scsi_remove_host(host);
@@ -1422,6 +1453,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
return 0;
fail:
+ hd->ScsiLookup[my_idx] = NULL;
mptscsih_freeChainBuffers(hd->ioc, my_idx);
mpt_free_msg_frame(hd->ioc, mf);
return SCSI_MLQUEUE_HOST_BUSY;
@@ -1709,24 +1741,23 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
MPT_FRAME_HDR *mf;
u32 ctx2abort;
int scpnt_idx;
+ int retval;
/* If we can't locate our host adapter structure, return FAILED status.
*/
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL) {
SCpnt->result = DID_RESET << 16;
SCpnt->scsi_done(SCpnt);
- dfailprintk((KERN_WARNING MYNAM ": mptscsih_abort: "
+ dfailprintk((KERN_INFO MYNAM ": mptscsih_abort: "
"Can't locate host! (sc=%p)\n",
SCpnt));
return FAILED;
}
ioc = hd->ioc;
- if (hd->resetPending)
+ if (hd->resetPending) {
return FAILED;
-
- printk(KERN_WARNING MYNAM ": %s: >> Attempting task abort! (sc=%p)\n",
- hd->ioc->name, SCpnt);
+ }
if (hd->timeouts < -1)
hd->timeouts++;
@@ -1734,16 +1765,20 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
/* Find this command
*/
if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(SCpnt)) < 0) {
- /* Cmd not found in ScsiLookup.
+ /* Cmd not found in ScsiLookup.
* Do OS callback.
*/
SCpnt->result = DID_RESET << 16;
- dtmprintk((KERN_WARNING MYNAM ": %s: mptscsih_abort: "
+ dtmprintk((KERN_INFO MYNAM ": %s: mptscsih_abort: "
"Command not in the active list! (sc=%p)\n",
hd->ioc->name, SCpnt));
return SUCCESS;
}
+ printk(KERN_WARNING MYNAM ": %s: attempting task abort! (sc=%p)\n",
+ hd->ioc->name, SCpnt);
+ scsi_print_command(SCpnt);
+
/* Most important! Set TaskMsgContext to SCpnt's MsgContext!
* (the IO to be ABORT'd)
*
@@ -1756,38 +1791,22 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
hd->abortSCpnt = SCpnt;
- if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
+ retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun,
- ctx2abort, 2 /* 2 second timeout */)
- < 0) {
+ ctx2abort, 2 /* 2 second timeout */);
- /* The TM request failed and the subsequent FW-reload failed!
- * Fatal error case.
- */
- printk(MYIOC_s_WARN_FMT "Error issuing abort task! (sc=%p)\n",
- hd->ioc->name, SCpnt);
+ printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n",
+ hd->ioc->name,
+ ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
- /* We must clear our pending flag before clearing our state.
- */
+ if (retval == 0)
+ return SUCCESS;
+
+ if(retval != FAILED ) {
hd->tmPending = 0;
hd->tmState = TM_STATE_NONE;
-
- /* Unmap the DMA buffers, if any. */
- if (SCpnt->use_sg) {
- pci_unmap_sg(ioc->pcidev, (struct scatterlist *) SCpnt->request_buffer,
- SCpnt->use_sg, SCpnt->sc_data_direction);
- } else if (SCpnt->request_bufflen) {
- pci_unmap_single(ioc->pcidev, SCpnt->SCp.dma_handle,
- SCpnt->request_bufflen, SCpnt->sc_data_direction);
- }
- hd->ScsiLookup[scpnt_idx] = NULL;
- SCpnt->result = DID_RESET << 16;
- SCpnt->scsi_done(SCpnt); /* Issue the command callback */
- mptscsih_freeChainBuffers(ioc, scpnt_idx);
- mpt_free_msg_frame(ioc, mf);
- return FAILED;
}
- return SUCCESS;
+ return FAILED;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1803,11 +1822,12 @@ int
mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
{
MPT_SCSI_HOST *hd;
+ int retval;
/* If we can't locate our host adapter structure, return FAILED status.
*/
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
- dtmprintk((KERN_WARNING MYNAM ": mptscsih_dev_reset: "
+ dtmprintk((KERN_INFO MYNAM ": mptscsih_dev_reset: "
"Can't locate host! (sc=%p)\n",
SCpnt));
return FAILED;
@@ -1816,24 +1836,26 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
if (hd->resetPending)
return FAILED;
- printk(KERN_WARNING MYNAM ": %s: >> Attempting target reset! (sc=%p)\n",
+ printk(KERN_WARNING MYNAM ": %s: attempting target reset! (sc=%p)\n",
hd->ioc->name, SCpnt);
+ scsi_print_command(SCpnt);
- if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
+ retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
SCpnt->device->channel, SCpnt->device->id,
- 0, 0, 5 /* 5 second timeout */)
- < 0){
- /* The TM request failed and the subsequent FW-reload failed!
- * Fatal error case.
- */
- printk(MYIOC_s_WARN_FMT "Error processing TaskMgmt request (sc=%p)\n",
- hd->ioc->name, SCpnt);
+ 0, 0, 5 /* 5 second timeout */);
+
+ printk (KERN_WARNING MYNAM ": %s: target reset: %s (sc=%p)\n",
+ hd->ioc->name,
+ ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
+
+ if (retval == 0)
+ return SUCCESS;
+
+ if(retval != FAILED ) {
hd->tmPending = 0;
hd->tmState = TM_STATE_NONE;
- return FAILED;
}
-
- return SUCCESS;
+ return FAILED;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1849,41 +1871,39 @@ int
mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
{
MPT_SCSI_HOST *hd;
- spinlock_t *host_lock = SCpnt->device->host->host_lock;
+ int retval;
/* If we can't locate our host adapter structure, return FAILED status.
*/
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
- dtmprintk((KERN_WARNING MYNAM ": mptscsih_bus_reset: "
+ dtmprintk((KERN_INFO MYNAM ": mptscsih_bus_reset: "
"Can't locate host! (sc=%p)\n",
SCpnt ) );
return FAILED;
}
- printk(KERN_WARNING MYNAM ": %s: >> Attempting bus reset! (sc=%p)\n",
+ printk(KERN_WARNING MYNAM ": %s: attempting bus reset! (sc=%p)\n",
hd->ioc->name, SCpnt);
+ scsi_print_command(SCpnt);
if (hd->timeouts < -1)
hd->timeouts++;
- /* We are now ready to execute the task management request. */
- if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
- SCpnt->device->channel, 0, 0, 0, 5 /* 5 second timeout */)
- < 0){
+ retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
+ SCpnt->device->channel, 0, 0, 0, 5 /* 5 second timeout */);
- /* The TM request failed and the subsequent FW-reload failed!
- * Fatal error case.
- */
- printk(MYIOC_s_WARN_FMT
- "Error processing TaskMgmt request (sc=%p)\n",
- hd->ioc->name, SCpnt);
+ printk (KERN_WARNING MYNAM ": %s: bus reset: %s (sc=%p)\n",
+ hd->ioc->name,
+ ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
+
+ if (retval == 0)
+ return SUCCESS;
+
+ if(retval != FAILED ) {
hd->tmPending = 0;
hd->tmState = TM_STATE_NONE;
- spin_lock_irq(host_lock);
- return FAILED;
}
-
- return SUCCESS;
+ return FAILED;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -2165,7 +2185,7 @@ mptscsih_slave_alloc(struct scsi_device *device)
vdev->raidVolume = 0;
hd->Targets[device->id] = vdev;
if (hd->ioc->bus_type == SCSI) {
- if (hd->ioc->spi_data.isRaid & (1 << device->id)) {
+ if (hd->ioc->raid_data.isRaid & (1 << device->id)) {
vdev->raidVolume = 1;
ddvtprintk((KERN_INFO
"RAID Volume @ id %d\n", device->id));
@@ -2180,22 +2200,6 @@ mptscsih_slave_alloc(struct scsi_device *device)
return 0;
}
-static int
-mptscsih_is_raid_volume(MPT_SCSI_HOST *hd, uint id)
-{
- int i;
-
- if (!hd->ioc->spi_data.isRaid || !hd->ioc->spi_data.pIocPg3)
- return 0;
-
- for (i = 0; i < hd->ioc->spi_data.pIocPg3->NumPhysDisks; i++) {
- if (id == hd->ioc->spi_data.pIocPg3->PhysDisk[i].PhysDiskID)
- return 1;
- }
-
- return 0;
-}
-
/*
* OS entry point to allow for host driver to free allocated memory
* Called if no device present or device being unloaded
@@ -2223,7 +2227,7 @@ mptscsih_slave_destroy(struct scsi_device *device)
hd->Targets[target] = NULL;
if (hd->ioc->bus_type == SCSI) {
- if (mptscsih_is_raid_volume(hd, target)) {
+ if (mptscsih_is_phys_disk(hd->ioc, target)) {
hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3;
} else {
hd->ioc->spi_data.dvStatus[target] =
@@ -2436,6 +2440,7 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
{
MPT_SCSI_HOST *hd;
unsigned long flags;
+ int ii;
dtmprintk((KERN_WARNING MYNAM
": IOC %s_reset routed to SCSI host driver!\n",
@@ -2493,11 +2498,8 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
/* ScsiLookup initialization
*/
- {
- int ii;
- for (ii=0; ii < hd->ioc->req_depth; ii++)
- hd->ScsiLookup[ii] = NULL;
- }
+ for (ii=0; ii < hd->ioc->req_depth; ii++)
+ hd->ScsiLookup[ii] = NULL;
/* 2. Chain Buffer initialization
*/
@@ -2546,6 +2548,16 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/* work queue thread to clear the persitency table */
+static void
+mptscsih_sas_persist_clear_table(void * arg)
+{
+ MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
+
+ mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
int
mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
{
@@ -2555,18 +2567,18 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
devtprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
ioc->name, event));
+ if (ioc->sh == NULL ||
+ ((hd = (MPT_SCSI_HOST *)ioc->sh->hostdata) == NULL))
+ return 1;
+
switch (event) {
case MPI_EVENT_UNIT_ATTENTION: /* 03 */
/* FIXME! */
break;
case MPI_EVENT_IOC_BUS_RESET: /* 04 */
case MPI_EVENT_EXT_BUS_RESET: /* 05 */
- hd = NULL;
- if (ioc->sh) {
- hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
- if (hd && (ioc->bus_type == SCSI) && (hd->soft_resets < -1))
- hd->soft_resets++;
- }
+ if (hd && (ioc->bus_type == SCSI) && (hd->soft_resets < -1))
+ hd->soft_resets++;
break;
case MPI_EVENT_LOGOUT: /* 09 */
/* FIXME! */
@@ -2585,69 +2597,24 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
break;
case MPI_EVENT_INTEGRATED_RAID: /* 0B */
+ {
+ pMpiEventDataRaid_t pRaidEventData =
+ (pMpiEventDataRaid_t) pEvReply->Data;
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
- /* negoNvram set to 0 if DV enabled and to USE_NVRAM if
- * if DV disabled. Need to check for target mode.
- */
- hd = NULL;
- if (ioc->sh)
- hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
-
- if (hd && (ioc->bus_type == SCSI) && (hd->negoNvram == 0)) {
- ScsiCfgData *pSpi;
- Ioc3PhysDisk_t *pPDisk;
- int numPDisk;
- u8 reason;
- u8 physDiskNum;
-
- reason = (le32_to_cpu(pEvReply->Data[0]) & 0x00FF0000) >> 16;
- if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
- /* New or replaced disk.
- * Set DV flag and schedule DV.
- */
- pSpi = &ioc->spi_data;
- physDiskNum = (le32_to_cpu(pEvReply->Data[0]) & 0xFF000000) >> 24;
- ddvtprintk(("DV requested for phys disk id %d\n", physDiskNum));
- if (pSpi->pIocPg3) {
- pPDisk = pSpi->pIocPg3->PhysDisk;
- numPDisk =pSpi->pIocPg3->NumPhysDisks;
-
- while (numPDisk) {
- if (physDiskNum == pPDisk->PhysDiskNum) {
- pSpi->dvStatus[pPDisk->PhysDiskID] = (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE);
- pSpi->forceDv = MPT_SCSICFG_NEED_DV;
- ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID));
- break;
- }
- pPDisk++;
- numPDisk--;
- }
-
- if (numPDisk == 0) {
- /* The physical disk that needs DV was not found
- * in the stored IOC Page 3. The driver must reload
- * this page. DV routine will set the NEED_DV flag for
- * all phys disks that have DV_NOT_DONE set.
- */
- pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
- ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n", physDiskNum));
- }
- }
- }
- }
+ /* Domain Validation Needed */
+ if (ioc->bus_type == SCSI &&
+ pRaidEventData->ReasonCode ==
+ MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED)
+ mptscsih_set_dvflags_raid(hd, pRaidEventData->PhysDiskNum);
#endif
+ break;
+ }
-#if defined(MPT_DEBUG_DV) || defined(MPT_DEBUG_DV_TINY)
- printk("Raid Event RF: ");
- {
- u32 *m = (u32 *)pEvReply;
- int ii;
- int n = (int)pEvReply->MsgLength;
- for (ii=6; ii < n; ii++)
- printk(" %08x", le32_to_cpu(m[ii]));
- printk("\n");
- }
-#endif
+ /* Persistent table is full. */
+ case MPI_EVENT_PERSISTENT_TABLE_FULL:
+ INIT_WORK(&mptscsih_persistTask,
+ mptscsih_sas_persist_clear_table,(void *)ioc);
+ schedule_work(&mptscsih_persistTask);
break;
case MPI_EVENT_NONE: /* 00 */
@@ -2684,7 +2651,7 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *
{
int indexed_lun, lun_index;
VirtDevice *vdev;
- ScsiCfgData *pSpi;
+ SpiCfgData *pSpi;
char data_56;
dinitprintk((MYIOC_s_INFO_FMT "initTarget bus=%d id=%d lun=%d hd=%p\n",
@@ -2791,7 +2758,7 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *
static void
mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56)
{
- ScsiCfgData *pspi_data = &hd->ioc->spi_data;
+ SpiCfgData *pspi_data = &hd->ioc->spi_data;
int id = (int) target->target_id;
int nvram;
VirtDevice *vdev;
@@ -2970,11 +2937,13 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56)
static void
mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq)
{
+ MPT_ADAPTER *ioc = hd->ioc;
u8 cmd;
- ScsiCfgData *pSpi;
+ SpiCfgData *pSpi;
- ddvtprintk((" set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n",
- pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0]));
+ ddvtprintk((MYIOC_s_NOTE_FMT
+ " set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n",
+ hd->ioc->name, pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0]));
if ((pReq->LUN[1] != 0) || (hd->negoNvram != 0))
return;
@@ -2982,12 +2951,12 @@ mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq)
cmd = pReq->CDB[0];
if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) {
- pSpi = &hd->ioc->spi_data;
- if ((pSpi->isRaid & (1 << pReq->TargetID)) && pSpi->pIocPg3) {
+ pSpi = &ioc->spi_data;
+ if ((ioc->raid_data.isRaid & (1 << pReq->TargetID)) && ioc->raid_data.pIocPg3) {
/* Set NEED_DV for all hidden disks
*/
- Ioc3PhysDisk_t *pPDisk = pSpi->pIocPg3->PhysDisk;
- int numPDisk = pSpi->pIocPg3->NumPhysDisks;
+ Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
+ int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
while (numPDisk) {
pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV;
@@ -3001,6 +2970,50 @@ mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq)
}
}
+/* mptscsih_raid_set_dv_flags()
+ *
+ * New or replaced disk. Set DV flag and schedule DV.
+ */
+static void
+mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id)
+{
+ MPT_ADAPTER *ioc = hd->ioc;
+ SpiCfgData *pSpi = &ioc->spi_data;
+ Ioc3PhysDisk_t *pPDisk;
+ int numPDisk;
+
+ if (hd->negoNvram != 0)
+ return;
+
+ ddvtprintk(("DV requested for phys disk id %d\n", id));
+ if (ioc->raid_data.pIocPg3) {
+ pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
+ numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
+ while (numPDisk) {
+ if (id == pPDisk->PhysDiskNum) {
+ pSpi->dvStatus[pPDisk->PhysDiskID] =
+ (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE);
+ pSpi->forceDv = MPT_SCSICFG_NEED_DV;
+ ddvtprintk(("NEED_DV set for phys disk id %d\n",
+ pPDisk->PhysDiskID));
+ break;
+ }
+ pPDisk++;
+ numPDisk--;
+ }
+
+ if (numPDisk == 0) {
+ /* The physical disk that needs DV was not found
+ * in the stored IOC Page 3. The driver must reload
+ * this page. DV routine will set the NEED_DV flag for
+ * all phys disks that have DV_NOT_DONE set.
+ */
+ pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
+ ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n",id));
+ }
+ }
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* If no Target, bus reset on 1st I/O. Set the flag to
@@ -3088,7 +3101,7 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags)
MPT_ADAPTER *ioc = hd->ioc;
Config_t *pReq;
SCSIDevicePage1_t *pData;
- VirtDevice *pTarget;
+ VirtDevice *pTarget=NULL;
MPT_FRAME_HDR *mf;
dma_addr_t dataDma;
u16 req_idx;
@@ -3187,7 +3200,7 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags)
#endif
if (flags & MPT_SCSICFG_BLK_NEGO)
- negoFlags = MPT_TARGET_NO_NEGO_WIDE | MPT_TARGET_NO_NEGO_SYNC;
+ negoFlags |= MPT_TARGET_NO_NEGO_WIDE | MPT_TARGET_NO_NEGO_SYNC;
mptscsih_setDevicePage1Flags(width, factor, offset,
&requested, &configuration, negoFlags);
@@ -4008,7 +4021,7 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum)
/* If target Ptr NULL or if this target is NOT a disk, skip.
*/
- if ((pTarget) && (pTarget->tflags & MPT_TARGET_FLAGS_Q_YES)){
+ if ((pTarget) && (pTarget->inq_data[0] == TYPE_DISK)){
for (lun=0; lun <= MPT_LAST_LUN; lun++) {
/* If LUN present, issue the command
*/
@@ -4103,9 +4116,9 @@ mptscsih_domainValidation(void *arg)
if ((ioc->spi_data.forceDv & MPT_SCSICFG_RELOAD_IOC_PG3) != 0) {
mpt_read_ioc_pg_3(ioc);
- if (ioc->spi_data.pIocPg3) {
- Ioc3PhysDisk_t *pPDisk = ioc->spi_data.pIocPg3->PhysDisk;
- int numPDisk = ioc->spi_data.pIocPg3->NumPhysDisks;
+ if (ioc->raid_data.pIocPg3) {
+ Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
+ int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
while (numPDisk) {
if (ioc->spi_data.dvStatus[pPDisk->PhysDiskID] & MPT_SCSICFG_DV_NOT_DONE)
@@ -4144,7 +4157,7 @@ mptscsih_domainValidation(void *arg)
isPhysDisk = mptscsih_is_phys_disk(ioc, id);
if (isPhysDisk) {
for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
- if (hd->ioc->spi_data.isRaid & (1 << ii)) {
+ if (hd->ioc->raid_data.isRaid & (1 << ii)) {
hd->ioc->spi_data.dvStatus[ii] |= MPT_SCSICFG_DV_PENDING;
}
}
@@ -4163,7 +4176,7 @@ mptscsih_domainValidation(void *arg)
if (isPhysDisk) {
for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
- if (hd->ioc->spi_data.isRaid & (1 << ii)) {
+ if (hd->ioc->raid_data.isRaid & (1 << ii)) {
hd->ioc->spi_data.dvStatus[ii] &= ~MPT_SCSICFG_DV_PENDING;
}
}
@@ -4185,21 +4198,21 @@ mptscsih_domainValidation(void *arg)
/* Search IOC page 3 to determine if this is hidden physical disk
*/
-static int
+/* Search IOC page 3 to determine if this is hidden physical disk
+ */
+static int
mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id)
{
- if (ioc->spi_data.pIocPg3) {
- Ioc3PhysDisk_t *pPDisk = ioc->spi_data.pIocPg3->PhysDisk;
- int numPDisk = ioc->spi_data.pIocPg3->NumPhysDisks;
+ int i;
- while (numPDisk) {
- if (pPDisk->PhysDiskID == id) {
- return 1;
- }
- pPDisk++;
- numPDisk--;
- }
+ if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3)
+ return 0;
+
+ for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+ if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID)
+ return 1;
}
+
return 0;
}
@@ -4405,7 +4418,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
/* Skip this ID? Set cfg.cfghdr.hdr to force config page write
*/
{
- ScsiCfgData *pspi_data = &hd->ioc->spi_data;
+ SpiCfgData *pspi_data = &hd->ioc->spi_data;
if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) {
/* Set the factor from nvram */
nfactor = (pspi_data->nvram[id] & MPT_NVRAM_SYNC_MASK) >> 8;
@@ -4435,11 +4448,11 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
}
/* Finish iocmd inititialization - hidden or visible disk? */
- if (ioc->spi_data.pIocPg3) {
+ if (ioc->raid_data.pIocPg3) {
/* Search IOC page 3 for matching id
*/
- Ioc3PhysDisk_t *pPDisk = ioc->spi_data.pIocPg3->PhysDisk;
- int numPDisk = ioc->spi_data.pIocPg3->NumPhysDisks;
+ Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
+ int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
while (numPDisk) {
if (pPDisk->PhysDiskID == id) {
@@ -4463,7 +4476,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
/* RAID Volume ID's may double for a physical device. If RAID but
* not a physical ID as well, skip DV.
*/
- if ((hd->ioc->spi_data.isRaid & (1 << id)) && !(iocmd.flags & MPT_ICFLAG_PHYS_DISK))
+ if ((hd->ioc->raid_data.isRaid & (1 << id)) && !(iocmd.flags & MPT_ICFLAG_PHYS_DISK))
goto target_done;
@@ -4812,6 +4825,8 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
notDone = 0;
if (iocmd.flags & MPT_ICFLAG_ECHO) {
bufsize = ((pbuf1[2] & 0x1F) <<8) | pbuf1[3];
+ if (pbuf1[0] & 0x01)
+ iocmd.flags |= MPT_ICFLAG_EBOS;
} else {
bufsize = pbuf1[1]<<16 | pbuf1[2]<<8 | pbuf1[3];
}
@@ -4908,6 +4923,9 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
}
iocmd.flags &= ~MPT_ICFLAG_DID_RESET;
+ if (iocmd.flags & MPT_ICFLAG_EBOS)
+ goto skip_Reserve;
+
repeat = 5;
while (repeat && (!(iocmd.flags & MPT_ICFLAG_RESERVED))) {
iocmd.cmd = RESERVE;
@@ -4951,6 +4969,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
}
}
+skip_Reserve:
mptscsih_fillbuf(pbuf1, sz, patt, 1);
iocmd.cmd = WRITE_BUFFER;
iocmd.data_dma = buf1_dma;
@@ -5195,11 +5214,12 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
* If not an LVD bus, the adapter minSyncFactor has been
* already throttled back.
*/
+ negoFlags = hd->ioc->spi_data.noQas;
if ((hd->Targets)&&((pTarget = hd->Targets[(int)id]) != NULL) && !pTarget->raidVolume) {
width = pTarget->maxWidth;
offset = pTarget->maxOffset;
factor = pTarget->minSyncFactor;
- negoFlags = pTarget->negoFlags;
+ negoFlags |= pTarget->negoFlags;
} else {
if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) {
data = hd->ioc->spi_data.nvram[id];
@@ -5220,7 +5240,6 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
}
/* Set the negotiation flags */
- negoFlags = hd->ioc->spi_data.noQas;
if (!width)
negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index 51c0255ac16e..09389af9845e 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -1,5 +1,5 @@
/*
- * linux/drivers/message/fusion/mptscsi.h
+ * linux/drivers/message/fusion/mptscsih.h
* High performance SCSI / Fibre Channel SCSI Host device driver.
* For use with PCI chip/adapter(s):
* LSIFC9xx/LSI409xx Fibre Channel
@@ -53,8 +53,8 @@
* SCSI Public stuff...
*/
-#define MPT_SCSI_CMD_PER_DEV_HIGH 31
-#define MPT_SCSI_CMD_PER_DEV_LOW 7
+#define MPT_SCSI_CMD_PER_DEV_HIGH 64
+#define MPT_SCSI_CMD_PER_DEV_LOW 32
#define MPT_SCSI_CMD_PER_LUN 7
@@ -77,6 +77,7 @@
#define MPTSCSIH_MAX_WIDTH 1
#define MPTSCSIH_MIN_SYNC 0x08
#define MPTSCSIH_SAF_TE 0
+#define MPTSCSIH_PT_CLEAR 0
#endif
@@ -105,3 +106,4 @@ extern int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pE
extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
extern void mptscsih_timer_expired(unsigned long data);
+extern void scsi_print_command(struct scsi_cmnd *cmd);
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 587d1274fd74..5c0e307d1d5d 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -199,7 +199,7 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
printk(MYIOC_s_WARN_FMT
"Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n",
ioc->name, ioc);
- return -ENODEV;
+ return 0;
}
sh = scsi_host_alloc(&mptspi_driver_template, sizeof(MPT_SCSI_HOST));