summaryrefslogtreecommitdiff
path: root/drivers/message
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/message')
-rw-r--r--drivers/message/fusion/mptbase.c63
-rw-r--r--drivers/message/fusion/mptbase.h66
-rw-r--r--drivers/message/fusion/mptsas.c2
-rw-r--r--drivers/message/fusion/mptscsih.c3
-rw-r--r--drivers/message/fusion/mptscsih.h1
5 files changed, 105 insertions, 30 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 7956a10f9488..517621fa8bca 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -63,6 +63,8 @@
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
+#include <linux/kthread.h>
+#include <scsi/scsi_host.h>
#include "mptbase.h"
#include "lsi/mpi_log_fc.h"
@@ -323,6 +325,32 @@ mpt_is_discovery_complete(MPT_ADAPTER *ioc)
return rc;
}
+
+/**
+ * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
+ * @arg: input argument, used to derive ioc
+ *
+ * Return 0 if controller is removed from pci subsystem.
+ * Return -1 for other case.
+ */
+static int mpt_remove_dead_ioc_func(void *arg)
+{
+ MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
+ struct pci_dev *pdev;
+
+ if ((ioc == NULL))
+ return -1;
+
+ pdev = ioc->pcidev;
+ if ((pdev == NULL))
+ return -1;
+
+ pci_remove_bus_device(pdev);
+ return 0;
+}
+
+
+
/**
* mpt_fault_reset_work - work performed on workq after ioc fault
* @work: input argument, used to derive ioc
@@ -336,12 +364,45 @@ mpt_fault_reset_work(struct work_struct *work)
u32 ioc_raw_state;
int rc;
unsigned long flags;
+ MPT_SCSI_HOST *hd;
+ struct task_struct *p;
if (ioc->ioc_reset_in_progress || !ioc->active)
goto out;
+
ioc_raw_state = mpt_GetIocState(ioc, 0);
- if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
+ if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
+ printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
+ ioc->name, __func__);
+
+ /*
+ * Call mptscsih_flush_pending_cmds callback so that we
+ * flush all pending commands back to OS.
+ * This call is required to aovid deadlock at block layer.
+ * Dead IOC will fail to do diag reset,and this call is safe
+ * since dead ioc will never return any command back from HW.
+ */
+ hd = shost_priv(ioc->sh);
+ ioc->schedule_dead_ioc_flush_running_cmds(hd);
+
+ /*Remove the Dead Host */
+ p = kthread_run(mpt_remove_dead_ioc_func, ioc,
+ "mpt_dead_ioc_%d", ioc->id);
+ if (IS_ERR(p)) {
+ printk(MYIOC_s_ERR_FMT
+ "%s: Running mpt_dead_ioc thread failed !\n",
+ ioc->name, __func__);
+ } else {
+ printk(MYIOC_s_WARN_FMT
+ "%s: Running mpt_dead_ioc thread success !\n",
+ ioc->name, __func__);
+ }
+ return; /* don't rearm timer */
+ }
+
+ if ((ioc_raw_state & MPI_IOC_STATE_MASK)
+ == MPI_IOC_STATE_FAULT) {
printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index fe902338539b..69ddabd51958 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -554,10 +554,47 @@ struct mptfc_rport_info
u8 flags;
};
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+
+/*
+ * MPT_SCSI_HOST defines - Used by the IOCTL and the SCSI drivers
+ * Private to the driver.
+ */
+
+#define MPT_HOST_BUS_UNKNOWN (0xFF)
+#define MPT_HOST_TOO_MANY_TM (0x05)
+#define MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
+#define MPT_HOST_NO_CHAIN (0xFFFFFFFF)
+#define MPT_NVRAM_MASK_TIMEOUT (0x000000FF)
+#define MPT_NVRAM_SYNC_MASK (0x0000FF00)
+#define MPT_NVRAM_SYNC_SHIFT (8)
+#define MPT_NVRAM_DISCONNECT_ENABLE (0x00010000)
+#define MPT_NVRAM_ID_SCAN_ENABLE (0x00020000)
+#define MPT_NVRAM_LUN_SCAN_ENABLE (0x00040000)
+#define MPT_NVRAM_TAG_QUEUE_ENABLE (0x00080000)
+#define MPT_NVRAM_WIDE_DISABLE (0x00100000)
+#define MPT_NVRAM_BOOT_CHOICE (0x00200000)
+
+typedef enum {
+ FC,
+ SPI,
+ SAS
+} BUS_TYPE;
+
+typedef struct _MPT_SCSI_HOST {
+ struct _MPT_ADAPTER *ioc;
+ ushort sel_timeout[MPT_MAX_FC_DEVICES];
+ char *info_kbuf;
+ long last_queue_full;
+ u16 spi_pending;
+ struct list_head target_reset_list;
+} MPT_SCSI_HOST;
+
typedef void (*MPT_ADD_SGE)(void *pAddr, u32 flagslength, dma_addr_t dma_addr);
typedef void (*MPT_ADD_CHAIN)(void *pAddr, u8 next, u16 length,
dma_addr_t dma_addr);
typedef void (*MPT_SCHEDULE_TARGET_RESET)(void *ioc);
+typedef void (*MPT_FLUSH_RUNNING_CMDS)(MPT_SCSI_HOST *hd);
/*
* Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS
@@ -717,6 +754,7 @@ typedef struct _MPT_ADAPTER
u8 taskmgmt_quiesce_io;
u8 ioc_reset_in_progress;
MPT_SCHEDULE_TARGET_RESET schedule_target_reset;
+ MPT_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
struct work_struct sas_persist_task;
struct work_struct fc_setup_reset_work;
@@ -830,19 +868,6 @@ typedef struct _MPT_LOCAL_REPLY {
u32 pad;
} MPT_LOCAL_REPLY;
-#define MPT_HOST_BUS_UNKNOWN (0xFF)
-#define MPT_HOST_TOO_MANY_TM (0x05)
-#define MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
-#define MPT_HOST_NO_CHAIN (0xFFFFFFFF)
-#define MPT_NVRAM_MASK_TIMEOUT (0x000000FF)
-#define MPT_NVRAM_SYNC_MASK (0x0000FF00)
-#define MPT_NVRAM_SYNC_SHIFT (8)
-#define MPT_NVRAM_DISCONNECT_ENABLE (0x00010000)
-#define MPT_NVRAM_ID_SCAN_ENABLE (0x00020000)
-#define MPT_NVRAM_LUN_SCAN_ENABLE (0x00040000)
-#define MPT_NVRAM_TAG_QUEUE_ENABLE (0x00080000)
-#define MPT_NVRAM_WIDE_DISABLE (0x00100000)
-#define MPT_NVRAM_BOOT_CHOICE (0x00200000)
/* The TM_STATE variable is used to provide strict single threading of TM
* requests as well as communicate TM error conditions.
@@ -851,21 +876,6 @@ typedef struct _MPT_LOCAL_REPLY {
#define TM_STATE_IN_PROGRESS (1)
#define TM_STATE_ERROR (2)
-typedef enum {
- FC,
- SPI,
- SAS
-} BUS_TYPE;
-
-typedef struct _MPT_SCSI_HOST {
- MPT_ADAPTER *ioc;
- ushort sel_timeout[MPT_MAX_FC_DEVICES];
- char *info_kbuf;
- long last_queue_full;
- u16 spi_pending;
- struct list_head target_reset_list;
-} MPT_SCSI_HOST;
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* More Dynamic Multi-Pathing stuff...
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 73229ff9cafa..d21924ba4b1a 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -5147,6 +5147,8 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->TaskCtx = mptsasTaskCtx;
ioc->InternalCtx = mptsasInternalCtx;
ioc->schedule_target_reset = &mptsas_schedule_target_reset;
+ ioc->schedule_dead_ioc_flush_running_cmds =
+ &mptscsih_flush_running_cmds;
/* Added sanity check on readiness of the MPT adapter.
*/
if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index ce61a5769765..de8cf92d8614 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1024,7 +1024,7 @@ out:
*
* Must be called while new I/Os are being queued.
*/
-static void
+void
mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
{
MPT_ADAPTER *ioc = hd->ioc;
@@ -1055,6 +1055,7 @@ mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
sc->scsi_done(sc);
}
}
+EXPORT_SYMBOL(mptscsih_flush_running_cmds);
/*
* mptscsih_search_running_cmds - Delete any commands associated
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index 45a5ff3eff61..43e75ff39921 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -135,3 +135,4 @@ extern int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id);
extern struct device_attribute *mptscsih_host_attrs[];
extern struct scsi_cmnd *mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
extern void mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
+extern void mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd);