diff options
Diffstat (limited to 'drivers/message')
42 files changed, 34779 insertions, 0 deletions
diff --git a/drivers/message/Makefile b/drivers/message/Makefile new file mode 100644 index 000000000000..97ef5a01ad11 --- /dev/null +++ b/drivers/message/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for MPT based block devices +# + +obj-$(CONFIG_I2O) += i2o/ +obj-$(CONFIG_FUSION) += fusion/ diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig new file mode 100644 index 000000000000..452418b24d7b --- /dev/null +++ b/drivers/message/fusion/Kconfig @@ -0,0 +1,66 @@ + +menu "Fusion MPT device support" + +config FUSION + tristate "Fusion MPT (base + ScsiHost) drivers" + depends on PCI && SCSI + ---help--- + LSI Logic Fusion(TM) Message Passing Technology (MPT) device support + provides high performance SCSI host initiator, and LAN [1] interface + services to a host system. The Fusion architecture is capable of + duplexing these protocols on high-speed Fibre Channel + (up to 2 GHz x 2 ports = 4 GHz) and parallel SCSI (up to Ultra-320) + physical medium. + + [1] LAN is not supported on parallel SCSI medium. + +config FUSION_MAX_SGE + int "Maximum number of scatter gather entries" + depends on FUSION + default "40" + help + This option allows you to specify the maximum number of scatter- + gather entries per I/O. The driver defaults to 40, a reasonable number + for most systems. However, the user may increase this up to 128. + Increasing this parameter will require significantly more memory + on a per controller instance. Increasing the parameter is not + necessary (or recommended) unless the user will be running + large I/O's via the raw interface. + +config FUSION_CTL + tristate "Fusion MPT misc device (ioctl) driver" + depends on FUSION + ---help--- + The Fusion MPT misc device driver provides specialized control + of MPT adapters via system ioctl calls. Use of ioctl calls to + the MPT driver requires that you create and use a misc device + node ala: + mknod /dev/mptctl c 10 240 + + One use of this ioctl interface is to perform an upgrade (reflash) + of the MPT adapter firmware. Refer to readme file(s) distributed + with the Fusion MPT linux driver for additional details. + + If enabled by saying M to this, a driver named: mptctl + will be compiled. + + If unsure whether you really want or need this, say N. + +config FUSION_LAN + tristate "Fusion MPT LAN driver" + depends on FUSION && NET_FC + ---help--- + This module supports LAN IP traffic over Fibre Channel port(s) + on Fusion MPT compatible hardware (LSIFC9xx chips). + The physical interface used is defined in RFC 2625. + Please refer to that document for details. + + Installing this driver requires the knowledge to configure and + activate a new network interface, "fc0", using standard Linux tools. + + If enabled by saying M to this, a driver named: mptlan + will be compiled. + + If unsure whether you really want or need this, say N. + +endmenu diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile new file mode 100644 index 000000000000..f6fdcaaefc89 --- /dev/null +++ b/drivers/message/fusion/Makefile @@ -0,0 +1,52 @@ +# +# Makefile for the LSI Logic Fusion MPT (Message Passing Technology) drivers. +# +# Note! If you want to turn on various debug defines for an extended period of +# time but don't want them lingering around in the Makefile when you pass it on +# to someone else, use the MPT_CFLAGS env variable (thanks Steve). -nromer + +#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-{ LSI_LOGIC + +# Architecture-specific... +# # intel +#EXTRA_CFLAGS += -g +# # sparc64 +#EXTRA_CFLAGS += -gstabs+ + +EXTRA_CFLAGS += ${MPT_CFLAGS} + +# Fusion MPT drivers; recognized debug defines... +# MPT general: +#EXTRA_CFLAGS += -DMPT_DEBUG_SCSI +#EXTRA_CFLAGS += -DMPT_DEBUG +#EXTRA_CFLAGS += -DMPT_DEBUG_MSG_FRAME +#EXTRA_CFLAGS += -DMPT_DEBUG_SG + +# +# driver/module specifics... +# +# For mptbase: +#CFLAGS_mptbase.o += -DMPT_DEBUG_HANDSHAKE +#CFLAGS_mptbase.o += -DMPT_DEBUG_IRQ +# +# For mptscsih: +#CFLAGS_mptscsih.o += -DMPT_DEBUG_SCANDV +#CFLAGS_mptscsih.o += -DMPT_DEBUG_RESET +#CFLAGS_mptscsih.o += -DMPT_DEBUG_NEH +# +# For mptctl: +#CFLAGS_mptctl.o += -DMPT_DEBUG_IOCTL +# +# For mptlan: +#CFLAGS_mptlan.o += -DMPT_LAN_IO_DEBUG +# +# For isense: + +# EXP... +##mptscsih-objs := scsihost.o scsiherr.o + +#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC + +obj-$(CONFIG_FUSION) += mptbase.o mptscsih.o +obj-$(CONFIG_FUSION_CTL) += mptctl.o +obj-$(CONFIG_FUSION_LAN) += mptlan.o diff --git a/drivers/message/fusion/linux_compat.h b/drivers/message/fusion/linux_compat.h new file mode 100644 index 000000000000..048b5b8610e3 --- /dev/null +++ b/drivers/message/fusion/linux_compat.h @@ -0,0 +1,18 @@ +/* drivers/message/fusion/linux_compat.h */ + +#ifndef FUSION_LINUX_COMPAT_H +#define FUSION_LINUX_COMPAT_H + +#include <linux/version.h> +#include <scsi/scsi_device.h> + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,6)) +static int inline scsi_device_online(struct scsi_device *sdev) +{ + return sdev->online; +} +#endif + + +/*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +#endif /* _LINUX_COMPAT_H */ diff --git a/drivers/message/fusion/lsi/fc_log.h b/drivers/message/fusion/lsi/fc_log.h new file mode 100644 index 000000000000..dc98d46f9071 --- /dev/null +++ b/drivers/message/fusion/lsi/fc_log.h @@ -0,0 +1,89 @@ +/* + * Copyright (c) 2000-2001 LSI Logic Corporation. All rights reserved. + * + * NAME: fc_log.h + * SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips + * DESCRIPTION: Contains the enumerated list of values that may be returned + * in the IOCLogInfo field of a MPI Default Reply Message. + * + * CREATION DATE: 6/02/2000 + * ID: $Id: fc_log.h,v 4.6 2001/07/26 14:41:33 sschremm Exp $ + */ + + +/* + * MpiIocLogInfo_t enum + * + * These 32 bit values are used in the IOCLogInfo field of the MPI reply + * messages. + * The value is 0xabcccccc where + * a = The type of log info as per the MPI spec. Since these codes are + * all for Fibre Channel this value will always be 2. + * b = Specifies a subclass of the firmware where + * 0 = FCP Initiator + * 1 = FCP Target + * 2 = LAN + * 3 = MPI Message Layer + * 4 = FC Link + * 5 = Context Manager + * 6 = Invalid Field Offset + * 7 = State Change Info + * all others are reserved for future use + * c = A specific value within the subclass. + * + * NOTE: Any new values should be added to the end of each subclass so that the + * codes remain consistent across firmware releases. + */ +typedef enum _MpiIocLogInfoFc +{ + MPI_IOCLOGINFO_FC_INIT_BASE = 0x20000000, + MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */ + MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */ + MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primative */ + MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN = 0x20000004, /* Bad Rx Frame, overrun */ + MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER = 0x20000005, /* Other errors caught by IOC which require retries */ + MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD = 0x20000006, /* Main processor could not initialize sub-processor */ + MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN = 0x20000007, /* Scatter Gather overrun */ + MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS = 0x20000008, /* Receiver detected context mismatch via invalid header */ + MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type */ + MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE = 0x2000000A, /* Link failure occurred */ + MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT = 0x2000000B, /* Transmitter timeout error */ + + MPI_IOCLOGINFO_FC_TARGET_BASE = 0x21000000, + MPI_IOCLOGINFO_FC_TARGET_NO_PDISC = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */ + MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN = 0x21000002, /* not sent because we are not logged in to the remote node */ + MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA = 0x21000005, /* Data In, Auto Response, missing data frames */ + MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP = 0x21000006, /* Data Out, No Response, not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP = 0x21000007, /* Auto-response after a write not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP = 0x21000008, /* Data In, No Response, not completed due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA = 0x21000009, /* Data In, No Response, missing data frames */ + MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP = 0x2100000a, /* Manual Response not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3 = 0x2100000b, /* not sent because remote node does not support Class 3 */ + MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID = 0x2100000c, /* not sent because login to remote node not validated */ + MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND = 0x2100000e, /* cleared from the outbound queue after a logout */ + MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN = 0x2100000f, /* cleared waiting for data after a logout */ + + MPI_IOCLOGINFO_FC_LAN_BASE = 0x22000000, + MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING = 0x22000001, /* Transaction Context Sgl Missing */ + MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE = 0x22000002, /* Transaction Context found before an EOB */ + MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET = 0x22000003, /* Transaction Context value has reserved bits set */ + MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG = 0x22000004, /* Invalid SGL Flags */ + + MPI_IOCLOGINFO_FC_MSG_BASE = 0x23000000, + + MPI_IOCLOGINFO_FC_LINK_BASE = 0x24000000, + MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT = 0x24000001, /* Loop initialization timed out */ + MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED = 0x24000002, /* Another system controller already initialized the loop */ + MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */ + MPI_IOCLOGINFO_FC_LINK_CRC_ERROR = 0x24000004, /* CRC check detected error on received frame */ + + MPI_IOCLOGINFO_FC_CTX_BASE = 0x25000000, + + MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */ + MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET = 0x26ffffff, + + MPI_IOCLOGINFO_FC_STATE_CHANGE = 0x27000000 /* The lower 24 bits give additional information concerning state change */ + +} MpiIocLogInfoFc_t; diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h new file mode 100644 index 000000000000..9dbb061265fe --- /dev/null +++ b/drivers/message/fusion/lsi/mpi.h @@ -0,0 +1,746 @@ +/* + * Copyright (c) 2000-2003 LSI Logic Corporation. + * + * + * Name: mpi.h + * Title: MPI Message independent structures and definitions + * Creation Date: July 27, 2000 + * + * mpi.h Version: 01.05.xx + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 05-24-00 00.10.02 Added MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH definition. + * 06-06-00 01.00.01 Update MPI_VERSION_MAJOR and MPI_VERSION_MINOR. + * 06-22-00 01.00.02 Added MPI_IOCSTATUS_LAN_ definitions. + * Removed LAN_SUSPEND function definition. + * Added MPI_MSGFLAGS_CONTINUATION_REPLY definition. + * 06-30-00 01.00.03 Added MPI_CONTEXT_REPLY_TYPE_LAN definition. + * Added MPI_GET/SET_CONTEXT_REPLY_TYPE macros. + * 07-27-00 01.00.04 Added MPI_FAULT_ definitions. + * Removed MPI_IOCSTATUS_MSG/DATA_XFER_ERROR definitions. + * Added MPI_IOCSTATUS_INTERNAL_ERROR definition. + * Added MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH. + * 11-02-00 01.01.01 Original release for post 1.0 work. + * 12-04-00 01.01.02 Added new function codes. + * 01-09-01 01.01.03 Added more definitions to the system interface section + * Added MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT. + * 01-25-01 01.01.04 Changed MPI_VERSION_MINOR from 0x00 to 0x01. + * 02-20-01 01.01.05 Started using MPI_POINTER. + * Fixed value for MPI_DIAG_RW_ENABLE. + * Added defines for MPI_DIAG_PREVENT_IOC_BOOT and + * MPI_DIAG_CLEAR_FLASH_BAD_SIG. + * Obsoleted MPI_IOCSTATUS_TARGET_FC_ defines. + * 02-27-01 01.01.06 Removed MPI_HOST_INDEX_REGISTER define. + * Added function codes for RAID. + * 04-09-01 01.01.07 Added alternate define for MPI_DOORBELL_ACTIVE, + * MPI_DOORBELL_USED, to better match the spec. + * 08-08-01 01.02.01 Original release for v1.2 work. + * Changed MPI_VERSION_MINOR from 0x01 to 0x02. + * Added define MPI_FUNCTION_TOOLBOX. + * 09-28-01 01.02.02 New function code MPI_SCSI_ENCLOSURE_PROCESSOR. + * 11-01-01 01.02.03 Changed name to MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR. + * 03-14-02 01.02.04 Added MPI_HEADER_VERSION_ defines. + * 05-31-02 01.02.05 Bumped MPI_HEADER_VERSION_UNIT. + * 07-12-02 01.02.06 Added define for MPI_FUNCTION_MAILBOX. + * 09-16-02 01.02.07 Bumped value for MPI_HEADER_VERSION_UNIT. + * 11-15-02 01.02.08 Added define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX and + * obsoleted define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX. + * 04-01-03 01.02.09 New IOCStatus code: MPI_IOCSTATUS_FC_EXCHANGE_CANCELED + * 06-26-03 01.02.10 Bumped MPI_HEADER_VERSION_UNIT value. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_H +#define MPI_H + + +/***************************************************************************** +* +* M P I V e r s i o n D e f i n i t i o n s +* +*****************************************************************************/ + +#define MPI_VERSION_MAJOR (0x01) +#define MPI_VERSION_MINOR (0x05) +#define MPI_VERSION_MAJOR_MASK (0xFF00) +#define MPI_VERSION_MAJOR_SHIFT (8) +#define MPI_VERSION_MINOR_MASK (0x00FF) +#define MPI_VERSION_MINOR_SHIFT (0) +#define MPI_VERSION ((MPI_VERSION_MAJOR << MPI_VERSION_MAJOR_SHIFT) | \ + MPI_VERSION_MINOR) + +#define MPI_VERSION_01_00 (0x0100) +#define MPI_VERSION_01_01 (0x0101) +#define MPI_VERSION_01_02 (0x0102) +#define MPI_VERSION_01_03 (0x0103) +#define MPI_VERSION_01_05 (0x0105) +/* Note: The major versions of 0xe0 through 0xff are reserved */ + +/* versioning for this MPI header set */ +#define MPI_HEADER_VERSION_UNIT (0x00) +#define MPI_HEADER_VERSION_DEV (0x00) +#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00) +#define MPI_HEADER_VERSION_UNIT_SHIFT (8) +#define MPI_HEADER_VERSION_DEV_MASK (0x00FF) +#define MPI_HEADER_VERSION_DEV_SHIFT (0) +#define MPI_HEADER_VERSION ((MPI_HEADER_VERSION_UNIT << 8) | MPI_HEADER_VERSION_DEV) + +/***************************************************************************** +* +* I O C S t a t e D e f i n i t i o n s +* +*****************************************************************************/ + +#define MPI_IOC_STATE_RESET (0x00000000) +#define MPI_IOC_STATE_READY (0x10000000) +#define MPI_IOC_STATE_OPERATIONAL (0x20000000) +#define MPI_IOC_STATE_FAULT (0x40000000) + +#define MPI_IOC_STATE_MASK (0xF0000000) +#define MPI_IOC_STATE_SHIFT (28) + +/* Fault state codes (product independent range 0x8000-0xFFFF) */ + +#define MPI_FAULT_REQUEST_MESSAGE_PCI_PARITY_ERROR (0x8111) +#define MPI_FAULT_REQUEST_MESSAGE_PCI_BUS_FAULT (0x8112) +#define MPI_FAULT_REPLY_MESSAGE_PCI_PARITY_ERROR (0x8113) +#define MPI_FAULT_REPLY_MESSAGE_PCI_BUS_FAULT (0x8114) +#define MPI_FAULT_DATA_SEND_PCI_PARITY_ERROR (0x8115) +#define MPI_FAULT_DATA_SEND_PCI_BUS_FAULT (0x8116) +#define MPI_FAULT_DATA_RECEIVE_PCI_PARITY_ERROR (0x8117) +#define MPI_FAULT_DATA_RECEIVE_PCI_BUS_FAULT (0x8118) + + +/***************************************************************************** +* +* P C I S y s t e m I n t e r f a c e R e g i s t e r s +* +*****************************************************************************/ + +/* S y s t e m D o o r b e l l */ +#define MPI_DOORBELL_OFFSET (0x00000000) +#define MPI_DOORBELL_ACTIVE (0x08000000) /* DoorbellUsed */ +#define MPI_DOORBELL_USED (MPI_DOORBELL_ACTIVE) +#define MPI_DOORBELL_ACTIVE_SHIFT (27) +#define MPI_DOORBELL_WHO_INIT_MASK (0x07000000) +#define MPI_DOORBELL_WHO_INIT_SHIFT (24) +#define MPI_DOORBELL_FUNCTION_MASK (0xFF000000) +#define MPI_DOORBELL_FUNCTION_SHIFT (24) +#define MPI_DOORBELL_ADD_DWORDS_MASK (0x00FF0000) +#define MPI_DOORBELL_ADD_DWORDS_SHIFT (16) +#define MPI_DOORBELL_DATA_MASK (0x0000FFFF) + + +#define MPI_WRITE_SEQUENCE_OFFSET (0x00000004) +#define MPI_WRSEQ_KEY_VALUE_MASK (0x0000000F) +#define MPI_WRSEQ_1ST_KEY_VALUE (0x04) +#define MPI_WRSEQ_2ND_KEY_VALUE (0x0B) +#define MPI_WRSEQ_3RD_KEY_VALUE (0x02) +#define MPI_WRSEQ_4TH_KEY_VALUE (0x07) +#define MPI_WRSEQ_5TH_KEY_VALUE (0x0D) + +#define MPI_DIAGNOSTIC_OFFSET (0x00000008) +#define MPI_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400) +#define MPI_DIAG_PREVENT_IOC_BOOT (0x00000200) +#define MPI_DIAG_DRWE (0x00000080) +#define MPI_DIAG_FLASH_BAD_SIG (0x00000040) +#define MPI_DIAG_RESET_HISTORY (0x00000020) +#define MPI_DIAG_RW_ENABLE (0x00000010) +#define MPI_DIAG_RESET_ADAPTER (0x00000004) +#define MPI_DIAG_DISABLE_ARM (0x00000002) +#define MPI_DIAG_MEM_ENABLE (0x00000001) + +#define MPI_TEST_BASE_ADDRESS_OFFSET (0x0000000C) + +#define MPI_DIAG_RW_DATA_OFFSET (0x00000010) + +#define MPI_DIAG_RW_ADDRESS_OFFSET (0x00000014) + +#define MPI_HOST_INTERRUPT_STATUS_OFFSET (0x00000030) +#define MPI_HIS_IOP_DOORBELL_STATUS (0x80000000) +#define MPI_HIS_REPLY_MESSAGE_INTERRUPT (0x00000008) +#define MPI_HIS_DOORBELL_INTERRUPT (0x00000001) + +#define MPI_HOST_INTERRUPT_MASK_OFFSET (0x00000034) +#define MPI_HIM_RIM (0x00000008) +#define MPI_HIM_DIM (0x00000001) + +#define MPI_REQUEST_QUEUE_OFFSET (0x00000040) +#define MPI_REQUEST_POST_FIFO_OFFSET (0x00000040) + +#define MPI_REPLY_QUEUE_OFFSET (0x00000044) +#define MPI_REPLY_POST_FIFO_OFFSET (0x00000044) +#define MPI_REPLY_FREE_FIFO_OFFSET (0x00000044) + +#define MPI_HI_PRI_REQUEST_QUEUE_OFFSET (0x00000048) + + + +/***************************************************************************** +* +* M e s s a g e F r a m e D e s c r i p t o r s +* +*****************************************************************************/ + +#define MPI_REQ_MF_DESCRIPTOR_NB_MASK (0x00000003) +#define MPI_REQ_MF_DESCRIPTOR_F_BIT (0x00000004) +#define MPI_REQ_MF_DESCRIPTOR_ADDRESS_MASK (0xFFFFFFF8) + +#define MPI_ADDRESS_REPLY_A_BIT (0x80000000) +#define MPI_ADDRESS_REPLY_ADDRESS_MASK (0x7FFFFFFF) + +#define MPI_CONTEXT_REPLY_A_BIT (0x80000000) +#define MPI_CONTEXT_REPLY_TYPE_MASK (0x60000000) +#define MPI_CONTEXT_REPLY_TYPE_SCSI_INIT (0x00) +#define MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET (0x01) +#define MPI_CONTEXT_REPLY_TYPE_LAN (0x02) +#define MPI_CONTEXT_REPLY_TYPE_SHIFT (29) +#define MPI_CONTEXT_REPLY_CONTEXT_MASK (0x1FFFFFFF) + + +/****************************************************************************/ +/* Context Reply macros */ +/****************************************************************************/ + +#define MPI_GET_CONTEXT_REPLY_TYPE(x) (((x) & MPI_CONTEXT_REPLY_TYPE_MASK) \ + >> MPI_CONTEXT_REPLY_TYPE_SHIFT) + +#define MPI_SET_CONTEXT_REPLY_TYPE(x, typ) \ + ((x) = ((x) & ~MPI_CONTEXT_REPLY_TYPE_MASK) | \ + (((typ) << MPI_CONTEXT_REPLY_TYPE_SHIFT) & \ + MPI_CONTEXT_REPLY_TYPE_MASK)) + + +/***************************************************************************** +* +* M e s s a g e F u n c t i o n s +* 0x80 -> 0x8F reserved for private message use per product +* +* +*****************************************************************************/ + +#define MPI_FUNCTION_SCSI_IO_REQUEST (0x00) +#define MPI_FUNCTION_SCSI_TASK_MGMT (0x01) +#define MPI_FUNCTION_IOC_INIT (0x02) +#define MPI_FUNCTION_IOC_FACTS (0x03) +#define MPI_FUNCTION_CONFIG (0x04) +#define MPI_FUNCTION_PORT_FACTS (0x05) +#define MPI_FUNCTION_PORT_ENABLE (0x06) +#define MPI_FUNCTION_EVENT_NOTIFICATION (0x07) +#define MPI_FUNCTION_EVENT_ACK (0x08) +#define MPI_FUNCTION_FW_DOWNLOAD (0x09) +#define MPI_FUNCTION_TARGET_CMD_BUFFER_POST (0x0A) +#define MPI_FUNCTION_TARGET_ASSIST (0x0B) +#define MPI_FUNCTION_TARGET_STATUS_SEND (0x0C) +#define MPI_FUNCTION_TARGET_MODE_ABORT (0x0D) +#define MPI_FUNCTION_FC_LINK_SRVC_BUF_POST (0x0E) +#define MPI_FUNCTION_FC_LINK_SRVC_RSP (0x0F) +#define MPI_FUNCTION_FC_EX_LINK_SRVC_SEND (0x10) +#define MPI_FUNCTION_FC_ABORT (0x11) +#define MPI_FUNCTION_FW_UPLOAD (0x12) +#define MPI_FUNCTION_FC_COMMON_TRANSPORT_SEND (0x13) +#define MPI_FUNCTION_FC_PRIMITIVE_SEND (0x14) + +#define MPI_FUNCTION_RAID_ACTION (0x15) +#define MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) + +#define MPI_FUNCTION_TOOLBOX (0x17) + +#define MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) + +#define MPI_FUNCTION_MAILBOX (0x19) + +#define MPI_FUNCTION_SMP_PASSTHROUGH (0x1A) +#define MPI_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) + +#define MPI_DIAG_BUFFER_POST (0x1D) +#define MPI_DIAG_RELEASE (0x1E) + +#define MPI_FUNCTION_SCSI_IO_32 (0x1F) + +#define MPI_FUNCTION_LAN_SEND (0x20) +#define MPI_FUNCTION_LAN_RECEIVE (0x21) +#define MPI_FUNCTION_LAN_RESET (0x22) + +#define MPI_FUNCTION_INBAND_BUFFER_POST (0x28) +#define MPI_FUNCTION_INBAND_SEND (0x29) +#define MPI_FUNCTION_INBAND_RSP (0x2A) +#define MPI_FUNCTION_INBAND_ABORT (0x2B) + +#define MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40) +#define MPI_FUNCTION_IO_UNIT_RESET (0x41) +#define MPI_FUNCTION_HANDSHAKE (0x42) +#define MPI_FUNCTION_REPLY_FRAME_REMOVAL (0x43) + + +/* standard version format */ +typedef struct _MPI_VERSION_STRUCT +{ + U8 Dev; /* 00h */ + U8 Unit; /* 01h */ + U8 Minor; /* 02h */ + U8 Major; /* 03h */ +} MPI_VERSION_STRUCT, MPI_POINTER PTR_MPI_VERSION_STRUCT, + MpiVersionStruct_t, MPI_POINTER pMpiVersionStruct; + +typedef union _MPI_VERSION_FORMAT +{ + MPI_VERSION_STRUCT Struct; + U32 Word; +} MPI_VERSION_FORMAT, MPI_POINTER PTR_MPI_VERSION_FORMAT, + MpiVersionFormat_t, MPI_POINTER pMpiVersionFormat_t; + + +/***************************************************************************** +* +* S c a t t e r G a t h e r E l e m e n t s +* +*****************************************************************************/ + +/****************************************************************************/ +/* Simple element structures */ +/****************************************************************************/ + +typedef struct _SGE_SIMPLE32 +{ + U32 FlagsLength; + U32 Address; +} SGE_SIMPLE32, MPI_POINTER PTR_SGE_SIMPLE32, + SGESimple32_t, MPI_POINTER pSGESimple32_t; + +typedef struct _SGE_SIMPLE64 +{ + U32 FlagsLength; + U64 Address; +} SGE_SIMPLE64, MPI_POINTER PTR_SGE_SIMPLE64, + SGESimple64_t, MPI_POINTER pSGESimple64_t; + +typedef struct _SGE_SIMPLE_UNION +{ + U32 FlagsLength; + union + { + U32 Address32; + U64 Address64; + }u; +} SGESimpleUnion_t, MPI_POINTER pSGESimpleUnion_t, + SGE_SIMPLE_UNION, MPI_POINTER PTR_SGE_SIMPLE_UNION; + +/****************************************************************************/ +/* Chain element structures */ +/****************************************************************************/ + +typedef struct _SGE_CHAIN32 +{ + U16 Length; + U8 NextChainOffset; + U8 Flags; + U32 Address; +} SGE_CHAIN32, MPI_POINTER PTR_SGE_CHAIN32, + SGEChain32_t, MPI_POINTER pSGEChain32_t; + +typedef struct _SGE_CHAIN64 +{ + U16 Length; + U8 NextChainOffset; + U8 Flags; + U64 Address; +} SGE_CHAIN64, MPI_POINTER PTR_SGE_CHAIN64, + SGEChain64_t, MPI_POINTER pSGEChain64_t; + +typedef struct _SGE_CHAIN_UNION +{ + U16 Length; + U8 NextChainOffset; + U8 Flags; + union + { + U32 Address32; + U64 Address64; + }u; +} SGE_CHAIN_UNION, MPI_POINTER PTR_SGE_CHAIN_UNION, + SGEChainUnion_t, MPI_POINTER pSGEChainUnion_t; + +/****************************************************************************/ +/* Transaction Context element */ +/****************************************************************************/ + +typedef struct _SGE_TRANSACTION32 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[1]; + U32 TransactionDetails[1]; +} SGE_TRANSACTION32, MPI_POINTER PTR_SGE_TRANSACTION32, + SGETransaction32_t, MPI_POINTER pSGETransaction32_t; + +typedef struct _SGE_TRANSACTION64 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[2]; + U32 TransactionDetails[1]; +} SGE_TRANSACTION64, MPI_POINTER PTR_SGE_TRANSACTION64, + SGETransaction64_t, MPI_POINTER pSGETransaction64_t; + +typedef struct _SGE_TRANSACTION96 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[3]; + U32 TransactionDetails[1]; +} SGE_TRANSACTION96, MPI_POINTER PTR_SGE_TRANSACTION96, + SGETransaction96_t, MPI_POINTER pSGETransaction96_t; + +typedef struct _SGE_TRANSACTION128 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[4]; + U32 TransactionDetails[1]; +} SGE_TRANSACTION128, MPI_POINTER PTR_SGE_TRANSACTION128, + SGETransaction_t128, MPI_POINTER pSGETransaction_t128; + +typedef struct _SGE_TRANSACTION_UNION +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + union + { + U32 TransactionContext32[1]; + U32 TransactionContext64[2]; + U32 TransactionContext96[3]; + U32 TransactionContext128[4]; + }u; + U32 TransactionDetails[1]; +} SGE_TRANSACTION_UNION, MPI_POINTER PTR_SGE_TRANSACTION_UNION, + SGETransactionUnion_t, MPI_POINTER pSGETransactionUnion_t; + + +/****************************************************************************/ +/* SGE IO types union for IO SGL's */ +/****************************************************************************/ + +typedef struct _SGE_IO_UNION +{ + union + { + SGE_SIMPLE_UNION Simple; + SGE_CHAIN_UNION Chain; + } u; +} SGE_IO_UNION, MPI_POINTER PTR_SGE_IO_UNION, + SGEIOUnion_t, MPI_POINTER pSGEIOUnion_t; + +/****************************************************************************/ +/* SGE union for SGL's with Simple and Transaction elements */ +/****************************************************************************/ + +typedef struct _SGE_TRANS_SIMPLE_UNION +{ + union + { + SGE_SIMPLE_UNION Simple; + SGE_TRANSACTION_UNION Transaction; + } u; +} SGE_TRANS_SIMPLE_UNION, MPI_POINTER PTR_SGE_TRANS_SIMPLE_UNION, + SGETransSimpleUnion_t, MPI_POINTER pSGETransSimpleUnion_t; + +/****************************************************************************/ +/* All SGE types union */ +/****************************************************************************/ + +typedef struct _SGE_MPI_UNION +{ + union + { + SGE_SIMPLE_UNION Simple; + SGE_CHAIN_UNION Chain; + SGE_TRANSACTION_UNION Transaction; + } u; +} SGE_MPI_UNION, MPI_POINTER PTR_SGE_MPI_UNION, + MPI_SGE_UNION_t, MPI_POINTER pMPI_SGE_UNION_t, + SGEAllUnion_t, MPI_POINTER pSGEAllUnion_t; + + +/****************************************************************************/ +/* SGE field definition and masks */ +/****************************************************************************/ + +/* Flags field bit definitions */ + +#define MPI_SGE_FLAGS_LAST_ELEMENT (0x80) +#define MPI_SGE_FLAGS_END_OF_BUFFER (0x40) +#define MPI_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30) +#define MPI_SGE_FLAGS_LOCAL_ADDRESS (0x08) +#define MPI_SGE_FLAGS_DIRECTION (0x04) +#define MPI_SGE_FLAGS_ADDRESS_SIZE (0x02) +#define MPI_SGE_FLAGS_END_OF_LIST (0x01) + +#define MPI_SGE_FLAGS_SHIFT (24) + +#define MPI_SGE_LENGTH_MASK (0x00FFFFFF) +#define MPI_SGE_CHAIN_LENGTH_MASK (0x0000FFFF) + +/* Element Type */ + +#define MPI_SGE_FLAGS_TRANSACTION_ELEMENT (0x00) +#define MPI_SGE_FLAGS_SIMPLE_ELEMENT (0x10) +#define MPI_SGE_FLAGS_CHAIN_ELEMENT (0x30) +#define MPI_SGE_FLAGS_ELEMENT_MASK (0x30) + +/* Address location */ + +#define MPI_SGE_FLAGS_SYSTEM_ADDRESS (0x00) + +/* Direction */ + +#define MPI_SGE_FLAGS_IOC_TO_HOST (0x00) +#define MPI_SGE_FLAGS_HOST_TO_IOC (0x04) + +/* Address Size */ + +#define MPI_SGE_FLAGS_32_BIT_ADDRESSING (0x00) +#define MPI_SGE_FLAGS_64_BIT_ADDRESSING (0x02) + +/* Context Size */ + +#define MPI_SGE_FLAGS_32_BIT_CONTEXT (0x00) +#define MPI_SGE_FLAGS_64_BIT_CONTEXT (0x02) +#define MPI_SGE_FLAGS_96_BIT_CONTEXT (0x04) +#define MPI_SGE_FLAGS_128_BIT_CONTEXT (0x06) + +#define MPI_SGE_CHAIN_OFFSET_MASK (0x00FF0000) +#define MPI_SGE_CHAIN_OFFSET_SHIFT (16) + + +/****************************************************************************/ +/* SGE operation Macros */ +/****************************************************************************/ + + /* SIMPLE FlagsLength manipulations... */ +#define MPI_SGE_SET_FLAGS(f) ((U32)(f) << MPI_SGE_FLAGS_SHIFT) +#define MPI_SGE_GET_FLAGS(fl) (((fl) & ~MPI_SGE_LENGTH_MASK) >> MPI_SGE_FLAGS_SHIFT) +#define MPI_SGE_LENGTH(fl) ((fl) & MPI_SGE_LENGTH_MASK) +#define MPI_SGE_CHAIN_LENGTH(fl) ((fl) & MPI_SGE_CHAIN_LENGTH_MASK) + +#define MPI_SGE_SET_FLAGS_LENGTH(f,l) (MPI_SGE_SET_FLAGS(f) | MPI_SGE_LENGTH(l)) + +#define MPI_pSGE_GET_FLAGS(psg) MPI_SGE_GET_FLAGS((psg)->FlagsLength) +#define MPI_pSGE_GET_LENGTH(psg) MPI_SGE_LENGTH((psg)->FlagsLength) +#define MPI_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI_SGE_SET_FLAGS_LENGTH(f,l) + /* CAUTION - The following are READ-MODIFY-WRITE! */ +#define MPI_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI_SGE_SET_FLAGS(f) +#define MPI_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI_SGE_LENGTH(l) + +#define MPI_GET_CHAIN_OFFSET(x) ((x&MPI_SGE_CHAIN_OFFSET_MASK)>>MPI_SGE_CHAIN_OFFSET_SHIFT) + + + +/***************************************************************************** +* +* S t a n d a r d M e s s a g e S t r u c t u r e s +* +*****************************************************************************/ + +/****************************************************************************/ +/* Standard message request header for all request messages */ +/****************************************************************************/ + +typedef struct _MSG_REQUEST_HEADER +{ + U8 Reserved[2]; /* function specific */ + U8 ChainOffset; + U8 Function; + U8 Reserved1[3]; /* function specific */ + U8 MsgFlags; + U32 MsgContext; +} MSG_REQUEST_HEADER, MPI_POINTER PTR_MSG_REQUEST_HEADER, + MPIHeader_t, MPI_POINTER pMPIHeader_t; + + +/****************************************************************************/ +/* Default Reply */ +/****************************************************************************/ + +typedef struct _MSG_DEFAULT_REPLY +{ + U8 Reserved[2]; /* function specific */ + U8 MsgLength; + U8 Function; + U8 Reserved1[3]; /* function specific */ + U8 MsgFlags; + U32 MsgContext; + U8 Reserved2[2]; /* function specific */ + U16 IOCStatus; + U32 IOCLogInfo; +} MSG_DEFAULT_REPLY, MPI_POINTER PTR_MSG_DEFAULT_REPLY, + MPIDefaultReply_t, MPI_POINTER pMPIDefaultReply_t; + + +/* MsgFlags definition for all replies */ + +#define MPI_MSGFLAGS_CONTINUATION_REPLY (0x80) + + +/***************************************************************************** +* +* I O C S t a t u s V a l u e s +* +*****************************************************************************/ + +/****************************************************************************/ +/* Common IOCStatus values for all replies */ +/****************************************************************************/ + +#define MPI_IOCSTATUS_SUCCESS (0x0000) +#define MPI_IOCSTATUS_INVALID_FUNCTION (0x0001) +#define MPI_IOCSTATUS_BUSY (0x0002) +#define MPI_IOCSTATUS_INVALID_SGL (0x0003) +#define MPI_IOCSTATUS_INTERNAL_ERROR (0x0004) +#define MPI_IOCSTATUS_RESERVED (0x0005) +#define MPI_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006) +#define MPI_IOCSTATUS_INVALID_FIELD (0x0007) +#define MPI_IOCSTATUS_INVALID_STATE (0x0008) +#define MPI_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009) + +/****************************************************************************/ +/* Config IOCStatus values */ +/****************************************************************************/ + +#define MPI_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020) +#define MPI_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021) +#define MPI_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022) +#define MPI_IOCSTATUS_CONFIG_INVALID_DATA (0x0023) +#define MPI_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024) +#define MPI_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025) + +/****************************************************************************/ +/* SCSIIO Reply (SPI & FCP) initiator values */ +/****************************************************************************/ + +#define MPI_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040) +#define MPI_IOCSTATUS_SCSI_INVALID_BUS (0x0041) +#define MPI_IOCSTATUS_SCSI_INVALID_TARGETID (0x0042) +#define MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043) +#define MPI_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044) +#define MPI_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045) +#define MPI_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046) +#define MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047) +#define MPI_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048) +#define MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049) +#define MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A) +#define MPI_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B) +#define MPI_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C) + +/****************************************************************************/ +/* For use by SCSI Initiator and SCSI Target end-to-end data protection */ +/****************************************************************************/ + +#define MPI_IOCSTATUS_EEDP_CRC_ERROR (0x004D) +#define MPI_IOCSTATUS_EEDP_LBA_TAG_ERROR (0x004E) +#define MPI_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F) + + +/****************************************************************************/ +/* SCSI (SPI & FCP) target values */ +/****************************************************************************/ + +#define MPI_IOCSTATUS_TARGET_PRIORITY_IO (0x0060) +#define MPI_IOCSTATUS_TARGET_INVALID_PORT (0x0061) +#define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX (0x0062) /* obsolete */ +#define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062) +#define MPI_IOCSTATUS_TARGET_ABORTED (0x0063) +#define MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064) +#define MPI_IOCSTATUS_TARGET_NO_CONNECTION (0x0065) +#define MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A) +#define MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT (0x006B) + +/****************************************************************************/ +/* Additional FCP target values (obsolete) */ +/****************************************************************************/ + +#define MPI_IOCSTATUS_TARGET_FC_ABORTED (0x0066) /* obsolete */ +#define MPI_IOCSTATUS_TARGET_FC_RX_ID_INVALID (0x0067) /* obsolete */ +#define MPI_IOCSTATUS_TARGET_FC_DID_INVALID (0x0068) /* obsolete */ +#define MPI_IOCSTATUS_TARGET_FC_NODE_LOGGED_OUT (0x0069) /* obsolete */ + +/****************************************************************************/ +/* Fibre Channel Direct Access values */ +/****************************************************************************/ + +#define MPI_IOCSTATUS_FC_ABORTED (0x0066) +#define MPI_IOCSTATUS_FC_RX_ID_INVALID (0x0067) +#define MPI_IOCSTATUS_FC_DID_INVALID (0x0068) +#define MPI_IOCSTATUS_FC_NODE_LOGGED_OUT (0x0069) +#define MPI_IOCSTATUS_FC_EXCHANGE_CANCELED (0x006C) + +/****************************************************************************/ +/* LAN values */ +/****************************************************************************/ + +#define MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND (0x0080) +#define MPI_IOCSTATUS_LAN_DEVICE_FAILURE (0x0081) +#define MPI_IOCSTATUS_LAN_TRANSMIT_ERROR (0x0082) +#define MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED (0x0083) +#define MPI_IOCSTATUS_LAN_RECEIVE_ERROR (0x0084) +#define MPI_IOCSTATUS_LAN_RECEIVE_ABORTED (0x0085) +#define MPI_IOCSTATUS_LAN_PARTIAL_PACKET (0x0086) +#define MPI_IOCSTATUS_LAN_CANCELED (0x0087) + +/****************************************************************************/ +/* Serial Attached SCSI values */ +/****************************************************************************/ + +#define MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090) + +/****************************************************************************/ +/* Inband values */ +/****************************************************************************/ + +#define MPI_IOCSTATUS_INBAND_ABORTED (0x0098) +#define MPI_IOCSTATUS_INBAND_NO_CONNECTION (0x0099) + +/****************************************************************************/ +/* Diagnostic Tools values */ +/****************************************************************************/ + +#define MPI_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0) + + +/****************************************************************************/ +/* IOCStatus flag to indicate that log info is available */ +/****************************************************************************/ + +#define MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000) +#define MPI_IOCSTATUS_MASK (0x7FFF) + +/****************************************************************************/ +/* LogInfo Types */ +/****************************************************************************/ + +#define MPI_IOCLOGINFO_TYPE_MASK (0xF0000000) +#define MPI_IOCLOGINFO_TYPE_SHIFT (28) +#define MPI_IOCLOGINFO_TYPE_NONE (0x0) +#define MPI_IOCLOGINFO_TYPE_SCSI (0x1) +#define MPI_IOCLOGINFO_TYPE_FC (0x2) +#define MPI_IOCLOGINFO_TYPE_SAS (0x3) +#define MPI_IOCLOGINFO_TYPE_ISCSI (0x4) +#define MPI_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF) + + +#endif diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h new file mode 100644 index 000000000000..a5680d864bf0 --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_cnfg.h @@ -0,0 +1,2105 @@ +/* + * Copyright (c) 2000-2003 LSI Logic Corporation. + * + * + * Name: mpi_cnfg.h + * Title: MPI Config message, structures, and Pages + * Creation Date: July 27, 2000 + * + * mpi_cnfg.h Version: 01.05.xx + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 06-06-00 01.00.01 Update version number for 1.0 release. + * 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages. + * Added FcPhLowestVersion, FcPhHighestVersion, Reserved2 + * fields to FC_DEVICE_0 page, updated the page version. + * Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in + * SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages + * and updated the page versions. + * Added _RESPONSE_ID_MASK definition to SCSI_PORT_1 + * page and updated the page version. + * Added Information field and _INFO_PARAMS_NEGOTIATED + * definitionto SCSI_DEVICE_0 page. + * 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the + * page version. + * Added BucketsRemaining to LAN_1 page, redefined the + * state values, and updated the page version. + * Revised bus width definitions in SCSI_PORT_0, + * SCSI_DEVICE_0 and SCSI_DEVICE_1 pages. + * 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page + * version. + * Moved FC_DEVICE_0 PageAddress description to spec. + * 07-27-00 01.00.05 Corrected the SubsystemVendorID and SubsystemID field + * widths in IOC_0 page and updated the page version. + * 11-02-00 01.01.01 Original release for post 1.0 work + * Added Manufacturing pages, IO Unit Page 2, SCSI SPI + * Port Page 2, FC Port Page 4, FC Port Page 5 + * 11-15-00 01.01.02 Interim changes to match proposals + * 12-04-00 01.01.03 Config page changes to match MPI rev 1.00.01. + * 12-05-00 01.01.04 Modified config page actions. + * 01-09-01 01.01.05 Added defines for page address formats. + * Data size for Manufacturing pages 2 and 3 no longer + * defined here. + * Io Unit Page 2 size is fixed at 4 adapters and some + * flags were changed. + * SCSI Port Page 2 Device Settings modified. + * New fields added to FC Port Page 0 and some flags + * cleaned up. + * Removed impedance flash from FC Port Page 1. + * Added FC Port pages 6 and 7. + * 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0. + * 01-29-01 01.01.07 Changed some defines to make them 32 character unique. + * Added some LinkType defines for FcPortPage0. + * 02-20-01 01.01.08 Started using MPI_POINTER. + * 02-27-01 01.01.09 Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with + * MPI_CONFIG_PAGETYPE_RAID_VOLUME. + * Added definitions and structures for IOC Page 2 and + * RAID Volume Page 2. + * 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9. + * CONFIG_PAGE_FC_PORT_3 now supports persistent by DID. + * Added VendorId and ProductRevLevel fields to + * RAIDVOL2_IM_PHYS_ID struct. + * Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_ + * defines to make them compatible to MPI version 1.0. + * Added structure offset comments. + * 04-09-01 01.01.11 Added some new defines for the PageAddress field and + * removed some obsolete ones. + * Added IO Unit Page 3. + * Modified defines for Scsi Port Page 2. + * Modified RAID Volume Pages. + * 08-08-01 01.02.01 Original release for v1.2 work. + * Added SepID and SepBus to RVP2 IMPhysicalDisk struct. + * Added defines for the SEP bits in RVP2 VolumeSettings. + * Modified the DeviceSettings field in RVP2 to use the + * proper structure. + * Added defines for SES, SAF-TE, and cross channel for + * IOCPage2 CapabilitiesFlags. + * Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE. + * Removed define for + * MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE. + * Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT. + * 08-29-01 01.02.02 Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035. + * Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY + * and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY. + * Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS, + * MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and + * MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and + * MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED. + * Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED + * and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED. + * Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1. + * Added rejected bits to SCSI Device Page 0 Information. + * Increased size of ALPA array in FC Port Page 2 by one + * and removed a one byte reserved field. + * 09-28-01 01.02.03 Swapped NegWireSpeedLow and NegWireSpeedLow in + * CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering. + * Added structures for Manufacturing Page 4, IO Unit + * Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and + * RAID PhysDisk Page 0. + * 10-04-01 01.02.04 Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK. + * Modified some of the new defines to make them 32 + * character unique. + * Modified how variable length pages (arrays) are defined. + * Added generic defines for hot spare pools and RAID + * volume types. + * 11-01-01 01.02.05 Added define for MPI_IOUNITPAGE1_DISABLE_IR. + * 03-14-02 01.02.06 Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with + * related define, and bumped the page version define. + * 05-31-02 01.02.07 Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a + * reserved byte and added a define. + * Added define for + * MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE. + * Added new config page: CONFIG_PAGE_IOC_5. + * Added MaxAliases, MaxHardAliases, and NumCurrentAliases + * fields to CONFIG_PAGE_FC_PORT_0. + * Added AltConnector and NumRequestedAliases fields to + * CONFIG_PAGE_FC_PORT_1. + * Added new config page: CONFIG_PAGE_FC_PORT_10. + * 07-12-02 01.02.08 Added more MPI_MANUFACTPAGE_DEVID_ defines. + * Added additional MPI_SCSIDEVPAGE0_NP_ defines. + * Added more MPI_SCSIDEVPAGE1_RP_ defines. + * Added define for + * MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE. + * Added new config page: CONFIG_PAGE_SCSI_DEVICE_3. + * Modified MPI_FCPORTPAGE5_FLAGS_ defines. + * 09-16-02 01.02.09 Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define. + * 11-15-02 01.02.10 Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0. + * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. + * Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0. + * 04-01-03 01.02.11 Added RR_TOV field and additional Flags defines for + * CONFIG_PAGE_FC_PORT_1. + * Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable + * an alias. + * Added more device id defines. + * 06-26-03 01.02.12 Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define. + * Added TargetConfig and IDConfig fields to + * CONFIG_PAGE_SCSI_PORT_1. + * Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2 + * to control DV. + * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. + * In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field + * with ADISCHardALPA. + * Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_CNFG_H +#define MPI_CNFG_H + + +/***************************************************************************** +* +* C o n f i g M e s s a g e a n d S t r u c t u r e s +* +*****************************************************************************/ + +typedef struct _CONFIG_PAGE_HEADER +{ + U8 PageVersion; /* 00h */ + U8 PageLength; /* 01h */ + U8 PageNumber; /* 02h */ + U8 PageType; /* 03h */ +} fCONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER, + ConfigPageHeader_t, MPI_POINTER pConfigPageHeader_t; + +typedef union _CONFIG_PAGE_HEADER_UNION +{ + ConfigPageHeader_t Struct; + U8 Bytes[4]; + U16 Word16[2]; + U32 Word32; +} ConfigPageHeaderUnion, MPI_POINTER pConfigPageHeaderUnion, + fCONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION; + +typedef struct _CONFIG_EXTENDED_PAGE_HEADER +{ + U8 PageVersion; /* 00h */ + U8 Reserved1; /* 01h */ + U8 PageNumber; /* 02h */ + U8 PageType; /* 03h */ + U16 ExtPageLength; /* 04h */ + U8 ExtPageType; /* 06h */ + U8 Reserved2; /* 07h */ +} fCONFIG_EXTENDED_PAGE_HEADER, MPI_POINTER PTR_CONFIG_EXTENDED_PAGE_HEADER, + ConfigExtendedPageHeader_t, MPI_POINTER pConfigExtendedPageHeader_t; + + + +/**************************************************************************** +* PageType field values +****************************************************************************/ +#define MPI_CONFIG_PAGEATTR_READ_ONLY (0x00) +#define MPI_CONFIG_PAGEATTR_CHANGEABLE (0x10) +#define MPI_CONFIG_PAGEATTR_PERSISTENT (0x20) +#define MPI_CONFIG_PAGEATTR_RO_PERSISTENT (0x30) +#define MPI_CONFIG_PAGEATTR_MASK (0xF0) + +#define MPI_CONFIG_PAGETYPE_IO_UNIT (0x00) +#define MPI_CONFIG_PAGETYPE_IOC (0x01) +#define MPI_CONFIG_PAGETYPE_BIOS (0x02) +#define MPI_CONFIG_PAGETYPE_SCSI_PORT (0x03) +#define MPI_CONFIG_PAGETYPE_SCSI_DEVICE (0x04) +#define MPI_CONFIG_PAGETYPE_FC_PORT (0x05) +#define MPI_CONFIG_PAGETYPE_FC_DEVICE (0x06) +#define MPI_CONFIG_PAGETYPE_LAN (0x07) +#define MPI_CONFIG_PAGETYPE_RAID_VOLUME (0x08) +#define MPI_CONFIG_PAGETYPE_MANUFACTURING (0x09) +#define MPI_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) +#define MPI_CONFIG_PAGETYPE_INBAND (0x0B) +#define MPI_CONFIG_PAGETYPE_EXTENDED (0x0F) +#define MPI_CONFIG_PAGETYPE_MASK (0x0F) + +#define MPI_CONFIG_TYPENUM_MASK (0x0FFF) + + +/**************************************************************************** +* ExtPageType field values +****************************************************************************/ +#define MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10) +#define MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11) +#define MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12) +#define MPI_CONFIG_EXTPAGETYPE_SAS_PHY (0x13) + + +/**************************************************************************** +* PageAddress field values +****************************************************************************/ +#define MPI_SCSI_PORT_PGAD_PORT_MASK (0x000000FF) + +#define MPI_SCSI_DEVICE_TARGET_ID_MASK (0x000000FF) +#define MPI_SCSI_DEVICE_TARGET_ID_SHIFT (0) +#define MPI_SCSI_DEVICE_BUS_MASK (0x0000FF00) +#define MPI_SCSI_DEVICE_BUS_SHIFT (8) + +#define MPI_FC_PORT_PGAD_PORT_MASK (0xF0000000) +#define MPI_FC_PORT_PGAD_PORT_SHIFT (28) +#define MPI_FC_PORT_PGAD_FORM_MASK (0x0F000000) +#define MPI_FC_PORT_PGAD_FORM_INDEX (0x01000000) +#define MPI_FC_PORT_PGAD_INDEX_MASK (0x0000FFFF) +#define MPI_FC_PORT_PGAD_INDEX_SHIFT (0) + +#define MPI_FC_DEVICE_PGAD_PORT_MASK (0xF0000000) +#define MPI_FC_DEVICE_PGAD_PORT_SHIFT (28) +#define MPI_FC_DEVICE_PGAD_FORM_MASK (0x0F000000) +#define MPI_FC_DEVICE_PGAD_FORM_NEXT_DID (0x00000000) +#define MPI_FC_DEVICE_PGAD_ND_PORT_MASK (0xF0000000) +#define MPI_FC_DEVICE_PGAD_ND_PORT_SHIFT (28) +#define MPI_FC_DEVICE_PGAD_ND_DID_MASK (0x00FFFFFF) +#define MPI_FC_DEVICE_PGAD_ND_DID_SHIFT (0) +#define MPI_FC_DEVICE_PGAD_FORM_BUS_TID (0x01000000) +#define MPI_FC_DEVICE_PGAD_BT_BUS_MASK (0x0000FF00) +#define MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT (8) +#define MPI_FC_DEVICE_PGAD_BT_TID_MASK (0x000000FF) +#define MPI_FC_DEVICE_PGAD_BT_TID_SHIFT (0) + +#define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) +#define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT (0) + +#define MPI_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000) +#define MPI_SAS_DEVICE_PGAD_FORM_SHIFT (28) +#define MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID (0x00000001) +#define MPI_SAS_DEVICE_PGAD_FORM_HANDLE (0x00000002) +#define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_MASK (0x0000FFFF) +#define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_SHIFT (0) +#define MPI_SAS_DEVICE_PGAD_BT_BUS_MASK (0x0000FF00) +#define MPI_SAS_DEVICE_PGAD_BT_BUS_SHIFT (8) +#define MPI_SAS_DEVICE_PGAD_BT_TID_MASK (0x000000FF) +#define MPI_SAS_DEVICE_PGAD_BT_TID_SHIFT (0) +#define MPI_SAS_DEVICE_PGAD_H_HANDLE_MASK (0x0000FFFF) +#define MPI_SAS_DEVICE_PGAD_H_HANDLE_SHIFT (0) + +#define MPI_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x00FF0000) +#define MPI_SAS_PHY_PGAD_PHY_NUMBER_SHIFT (16) +#define MPI_SAS_PHY_PGAD_DEVHANDLE_MASK (0x0000FFFF) +#define MPI_SAS_PHY_PGAD_DEVHANDLE_SHIFT (0) + + +/**************************************************************************** +* Config Request Message +****************************************************************************/ +typedef struct _MSG_CONFIG +{ + U8 Action; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 ExtPageLength; /* 04h */ + U8 ExtPageType; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 Reserved2[8]; /* 0Ch */ + fCONFIG_PAGE_HEADER Header; /* 14h */ + U32 PageAddress; /* 18h */ + SGE_IO_UNION PageBufferSGE; /* 1Ch */ +} MSG_CONFIG, MPI_POINTER PTR_MSG_CONFIG, + Config_t, MPI_POINTER pConfig_t; + + +/**************************************************************************** +* Action field values +****************************************************************************/ +#define MPI_CONFIG_ACTION_PAGE_HEADER (0x00) +#define MPI_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) +#define MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) +#define MPI_CONFIG_ACTION_PAGE_DEFAULT (0x03) +#define MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) +#define MPI_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) +#define MPI_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) + + +/* Config Reply Message */ +typedef struct _MSG_CONFIG_REPLY +{ + U8 Action; /* 00h */ + U8 Reserved; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 ExtPageLength; /* 04h */ + U8 ExtPageType; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 Reserved2[2]; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + fCONFIG_PAGE_HEADER Header; /* 14h */ +} MSG_CONFIG_REPLY, MPI_POINTER PTR_MSG_CONFIG_REPLY, + ConfigReply_t, MPI_POINTER pConfigReply_t; + + + +/***************************************************************************** +* +* C o n f i g u r a t i o n P a g e s +* +*****************************************************************************/ + +/**************************************************************************** +* Manufacturing Config pages +****************************************************************************/ +#define MPI_MANUFACTPAGE_VENDORID_LSILOGIC (0x1000) +/* Fibre Channel */ +#define MPI_MANUFACTPAGE_DEVICEID_FC909 (0x0621) +#define MPI_MANUFACTPAGE_DEVICEID_FC919 (0x0624) +#define MPI_MANUFACTPAGE_DEVICEID_FC929 (0x0622) +#define MPI_MANUFACTPAGE_DEVICEID_FC919X (0x0628) +#define MPI_MANUFACTPAGE_DEVICEID_FC929X (0x0626) +/* SCSI */ +#define MPI_MANUFACTPAGE_DEVID_53C1030 (0x0030) +#define MPI_MANUFACTPAGE_DEVID_53C1030ZC (0x0031) +#define MPI_MANUFACTPAGE_DEVID_1030_53C1035 (0x0032) +#define MPI_MANUFACTPAGE_DEVID_1030ZC_53C1035 (0x0033) +#define MPI_MANUFACTPAGE_DEVID_53C1035 (0x0040) +#define MPI_MANUFACTPAGE_DEVID_53C1035ZC (0x0041) +/* SAS */ +#define MPI_MANUFACTPAGE_DEVID_SAS1064 (0x0050) + + +typedef struct _CONFIG_PAGE_MANUFACTURING_0 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U8 ChipName[16]; /* 04h */ + U8 ChipRevision[8]; /* 14h */ + U8 BoardName[16]; /* 1Ch */ + U8 BoardAssembly[16]; /* 2Ch */ + U8 BoardTracerNumber[16]; /* 3Ch */ + +} fCONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0, + ManufacturingPage0_t, MPI_POINTER pManufacturingPage0_t; + +#define MPI_MANUFACTURING0_PAGEVERSION (0x00) + + +typedef struct _CONFIG_PAGE_MANUFACTURING_1 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U8 VPD[256]; /* 04h */ +} fCONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1, + ManufacturingPage1_t, MPI_POINTER pManufacturingPage1_t; + +#define MPI_MANUFACTURING1_PAGEVERSION (0x00) + + +typedef struct _MPI_CHIP_REVISION_ID +{ + U16 DeviceID; /* 00h */ + U8 PCIRevisionID; /* 02h */ + U8 Reserved; /* 03h */ +} MPI_CHIP_REVISION_ID, MPI_POINTER PTR_MPI_CHIP_REVISION_ID, + MpiChipRevisionId_t, MPI_POINTER pMpiChipRevisionId_t; + + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI_MAN_PAGE_2_HW_SETTINGS_WORDS +#define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS (1) +#endif + +typedef struct _CONFIG_PAGE_MANUFACTURING_2 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + MPI_CHIP_REVISION_ID ChipId; /* 04h */ + U32 HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 08h */ +} fCONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2, + ManufacturingPage2_t, MPI_POINTER pManufacturingPage2_t; + +#define MPI_MANUFACTURING2_PAGEVERSION (0x00) + + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI_MAN_PAGE_3_INFO_WORDS +#define MPI_MAN_PAGE_3_INFO_WORDS (1) +#endif + +typedef struct _CONFIG_PAGE_MANUFACTURING_3 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + MPI_CHIP_REVISION_ID ChipId; /* 04h */ + U32 Info[MPI_MAN_PAGE_3_INFO_WORDS];/* 08h */ +} fCONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3, + ManufacturingPage3_t, MPI_POINTER pManufacturingPage3_t; + +#define MPI_MANUFACTURING3_PAGEVERSION (0x00) + + +typedef struct _CONFIG_PAGE_MANUFACTURING_4 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 04h */ + U8 InfoOffset0; /* 08h */ + U8 InfoSize0; /* 09h */ + U8 InfoOffset1; /* 0Ah */ + U8 InfoSize1; /* 0Bh */ + U8 InquirySize; /* 0Ch */ + U8 Flags; /* 0Dh */ + U16 Reserved2; /* 0Eh */ + U8 InquiryData[56]; /* 10h */ + U32 ISVolumeSettings; /* 48h */ + U32 IMEVolumeSettings; /* 4Ch */ + U32 IMVolumeSettings; /* 50h */ +} fCONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4, + ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t; + +#define MPI_MANUFACTURING4_PAGEVERSION (0x01) + +/* defines for the Flags field */ +#define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA (0x01) + + +typedef struct _CONFIG_PAGE_MANUFACTURING_5 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U64 BaseWWID; /* 04h */ +} fCONFIG_PAGE_MANUFACTURING_5, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_5, + ManufacturingPage5_t, MPI_POINTER pManufacturingPage5_t; + +#define MPI_MANUFACTURING5_PAGEVERSION (0x00) + + +typedef struct _CONFIG_PAGE_MANUFACTURING_6 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 ProductSpecificInfo;/* 04h */ +} fCONFIG_PAGE_MANUFACTURING_6, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_6, + ManufacturingPage6_t, MPI_POINTER pManufacturingPage6_t; + +#define MPI_MANUFACTURING6_PAGEVERSION (0x00) + + +/**************************************************************************** +* IO Unit Config Pages +****************************************************************************/ + +typedef struct _CONFIG_PAGE_IO_UNIT_0 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U64 UniqueValue; /* 04h */ +} fCONFIG_PAGE_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_0, + IOUnitPage0_t, MPI_POINTER pIOUnitPage0_t; + +#define MPI_IOUNITPAGE0_PAGEVERSION (0x00) + + +typedef struct _CONFIG_PAGE_IO_UNIT_1 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 Flags; /* 04h */ +} fCONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1, + IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t; + +#define MPI_IOUNITPAGE1_PAGEVERSION (0x01) + +/* IO Unit Page 1 Flags defines */ +#define MPI_IOUNITPAGE1_MULTI_FUNCTION (0x00000000) +#define MPI_IOUNITPAGE1_SINGLE_FUNCTION (0x00000001) +#define MPI_IOUNITPAGE1_MULTI_PATHING (0x00000002) +#define MPI_IOUNITPAGE1_SINGLE_PATHING (0x00000000) +#define MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) +#define MPI_IOUNITPAGE1_DISABLE_QUEUE_FULL_HANDLING (0x00000020) +#define MPI_IOUNITPAGE1_DISABLE_IR (0x00000040) +#define MPI_IOUNITPAGE1_FORCE_32 (0x00000080) +#define MPI_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100) + + +typedef struct _MPI_ADAPTER_INFO +{ + U8 PciBusNumber; /* 00h */ + U8 PciDeviceAndFunctionNumber; /* 01h */ + U16 AdapterFlags; /* 02h */ +} MPI_ADAPTER_INFO, MPI_POINTER PTR_MPI_ADAPTER_INFO, + MpiAdapterInfo_t, MPI_POINTER pMpiAdapterInfo_t; + +#define MPI_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) +#define MPI_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) + +typedef struct _CONFIG_PAGE_IO_UNIT_2 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 Flags; /* 04h */ + U32 BiosVersion; /* 08h */ + MPI_ADAPTER_INFO AdapterOrder[4]; /* 0Ch */ +} fCONFIG_PAGE_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_2, + IOUnitPage2_t, MPI_POINTER pIOUnitPage2_t; + +#define MPI_IOUNITPAGE2_PAGEVERSION (0x00) + +#define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR (0x00000002) +#define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE (0x00000004) +#define MPI_IOUNITPAGE2_FLAGS_COLOR_VIDEO_DISABLE (0x00000008) +#define MPI_IOUNITPAGE2_FLAGS_DONT_HOOK_INT_40 (0x00000010) + +#define MPI_IOUNITPAGE2_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0) +#define MPI_IOUNITPAGE2_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000) +#define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DISPLAY (0x00000020) +#define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040) + + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX +#define MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) +#endif + +typedef struct _CONFIG_PAGE_IO_UNIT_3 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U8 GPIOCount; /* 04h */ + U8 Reserved1; /* 05h */ + U16 Reserved2; /* 06h */ + U16 GPIOVal[MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX]; /* 08h */ +} fCONFIG_PAGE_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_3, + IOUnitPage3_t, MPI_POINTER pIOUnitPage3_t; + +#define MPI_IOUNITPAGE3_PAGEVERSION (0x01) + +#define MPI_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFC) +#define MPI_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) +#define MPI_IOUNITPAGE3_GPIO_SETTING_OFF (0x00) +#define MPI_IOUNITPAGE3_GPIO_SETTING_ON (0x01) + + +/**************************************************************************** +* IOC Config Pages +****************************************************************************/ + +typedef struct _CONFIG_PAGE_IOC_0 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 TotalNVStore; /* 04h */ + U32 FreeNVStore; /* 08h */ + U16 VendorID; /* 0Ch */ + U16 DeviceID; /* 0Eh */ + U8 RevisionID; /* 10h */ + U8 Reserved[3]; /* 11h */ + U32 ClassCode; /* 14h */ + U16 SubsystemVendorID; /* 18h */ + U16 SubsystemID; /* 1Ah */ +} fCONFIG_PAGE_IOC_0, MPI_POINTER PTR_CONFIG_PAGE_IOC_0, + IOCPage0_t, MPI_POINTER pIOCPage0_t; + +#define MPI_IOCPAGE0_PAGEVERSION (0x01) + + +typedef struct _CONFIG_PAGE_IOC_1 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 Flags; /* 04h */ + U32 CoalescingTimeout; /* 08h */ + U8 CoalescingDepth; /* 0Ch */ + U8 PCISlotNum; /* 0Dh */ + U8 Reserved[2]; /* 0Eh */ +} fCONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1, + IOCPage1_t, MPI_POINTER pIOCPage1_t; + +#define MPI_IOCPAGE1_PAGEVERSION (0x01) + +/* defines for the Flags field */ +#define MPI_IOCPAGE1_EEDP_HOST_SUPPORTS_DIF (0x08000000) +#define MPI_IOCPAGE1_EEDP_MODE_MASK (0x07000000) +#define MPI_IOCPAGE1_EEDP_MODE_OFF (0x00000000) +#define MPI_IOCPAGE1_EEDP_MODE_T10 (0x01000000) +#define MPI_IOCPAGE1_EEDP_MODE_LSI_1 (0x02000000) +#define MPI_IOCPAGE1_REPLY_COALESCING (0x00000001) + +#define MPI_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) + + +typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL +{ + U8 VolumeID; /* 00h */ + U8 VolumeBus; /* 01h */ + U8 VolumeIOC; /* 02h */ + U8 VolumePageNumber; /* 03h */ + U8 VolumeType; /* 04h */ + U8 Flags; /* 05h */ + U16 Reserved3; /* 06h */ +} fCONFIG_PAGE_IOC_2_RAID_VOL, MPI_POINTER PTR_CONFIG_PAGE_IOC_2_RAID_VOL, + ConfigPageIoc2RaidVol_t, MPI_POINTER pConfigPageIoc2RaidVol_t; + +/* IOC Page 2 Volume RAID Type values, also used in RAID Volume pages */ + +#define MPI_RAID_VOL_TYPE_IS (0x00) +#define MPI_RAID_VOL_TYPE_IME (0x01) +#define MPI_RAID_VOL_TYPE_IM (0x02) + +/* IOC Page 2 Volume Flags values */ + +#define MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE (0x08) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI_IOC_PAGE_2_RAID_VOLUME_MAX +#define MPI_IOC_PAGE_2_RAID_VOLUME_MAX (1) +#endif + +typedef struct _CONFIG_PAGE_IOC_2 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 CapabilitiesFlags; /* 04h */ + U8 NumActiveVolumes; /* 08h */ + U8 MaxVolumes; /* 09h */ + U8 NumActivePhysDisks; /* 0Ah */ + U8 MaxPhysDisks; /* 0Bh */ + fCONFIG_PAGE_IOC_2_RAID_VOL RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX];/* 0Ch */ +} fCONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2, + IOCPage2_t, MPI_POINTER pIOCPage2_t; + +#define MPI_IOCPAGE2_PAGEVERSION (0x02) + +/* IOC Page 2 Capabilities flags */ + +#define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT (0x00000001) +#define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT (0x00000002) +#define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT (0x00000004) +#define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT (0x20000000) +#define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT (0x40000000) +#define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT (0x80000000) + + +typedef struct _IOC_3_PHYS_DISK +{ + U8 PhysDiskID; /* 00h */ + U8 PhysDiskBus; /* 01h */ + U8 PhysDiskIOC; /* 02h */ + U8 PhysDiskNum; /* 03h */ +} IOC_3_PHYS_DISK, MPI_POINTER PTR_IOC_3_PHYS_DISK, + Ioc3PhysDisk_t, MPI_POINTER pIoc3PhysDisk_t; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI_IOC_PAGE_3_PHYSDISK_MAX +#define MPI_IOC_PAGE_3_PHYSDISK_MAX (1) +#endif + +typedef struct _CONFIG_PAGE_IOC_3 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U8 NumPhysDisks; /* 04h */ + U8 Reserved1; /* 05h */ + U16 Reserved2; /* 06h */ + IOC_3_PHYS_DISK PhysDisk[MPI_IOC_PAGE_3_PHYSDISK_MAX]; /* 08h */ +} fCONFIG_PAGE_IOC_3, MPI_POINTER PTR_CONFIG_PAGE_IOC_3, + IOCPage3_t, MPI_POINTER pIOCPage3_t; + +#define MPI_IOCPAGE3_PAGEVERSION (0x00) + + +typedef struct _IOC_4_SEP +{ + U8 SEPTargetID; /* 00h */ + U8 SEPBus; /* 01h */ + U16 Reserved; /* 02h */ +} IOC_4_SEP, MPI_POINTER PTR_IOC_4_SEP, + Ioc4Sep_t, MPI_POINTER pIoc4Sep_t; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI_IOC_PAGE_4_SEP_MAX +#define MPI_IOC_PAGE_4_SEP_MAX (1) +#endif + +typedef struct _CONFIG_PAGE_IOC_4 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U8 ActiveSEP; /* 04h */ + U8 MaxSEP; /* 05h */ + U16 Reserved1; /* 06h */ + IOC_4_SEP SEP[MPI_IOC_PAGE_4_SEP_MAX]; /* 08h */ +} fCONFIG_PAGE_IOC_4, MPI_POINTER PTR_CONFIG_PAGE_IOC_4, + IOCPage4_t, MPI_POINTER pIOCPage4_t; + +#define MPI_IOCPAGE4_PAGEVERSION (0x00) + + +typedef struct _IOC_5_HOT_SPARE +{ + U8 PhysDiskNum; /* 00h */ + U8 Reserved; /* 01h */ + U8 HotSparePool; /* 02h */ + U8 Flags; /* 03h */ +} IOC_5_HOT_SPARE, MPI_POINTER PTR_IOC_5_HOT_SPARE, + Ioc5HotSpare_t, MPI_POINTER pIoc5HotSpare_t; + +/* IOC Page 5 HotSpare Flags */ +#define MPI_IOC_PAGE_5_HOT_SPARE_ACTIVE (0x01) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI_IOC_PAGE_5_HOT_SPARE_MAX +#define MPI_IOC_PAGE_5_HOT_SPARE_MAX (1) +#endif + +typedef struct _CONFIG_PAGE_IOC_5 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 04h */ + U8 NumHotSpares; /* 08h */ + U8 Reserved2; /* 09h */ + U16 Reserved3; /* 0Ah */ + IOC_5_HOT_SPARE HotSpare[MPI_IOC_PAGE_5_HOT_SPARE_MAX]; /* 0Ch */ +} fCONFIG_PAGE_IOC_5, MPI_POINTER PTR_CONFIG_PAGE_IOC_5, + IOCPage5_t, MPI_POINTER pIOCPage5_t; + +#define MPI_IOCPAGE5_PAGEVERSION (0x00) + + +/**************************************************************************** +* BIOS Port Config Pages +****************************************************************************/ + +typedef struct _CONFIG_PAGE_BIOS_1 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 BiosOptions; /* 04h */ + U32 IOCSettings; /* 08h */ + U32 Reserved1; /* 0Ch */ + U32 DeviceSettings; /* 10h */ + U16 NumberOfDevices; /* 14h */ + U16 Reserved2; /* 16h */ + U16 IOTimeoutBlockDevicesNonRM; /* 18h */ + U16 IOTimeoutSequential; /* 1Ah */ + U16 IOTimeoutOther; /* 1Ch */ + U16 IOTimeoutBlockDevicesRM; /* 1Eh */ +} fCONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1, + BIOSPage1_t, MPI_POINTER pBIOSPage1_t; + +#define MPI_BIOSPAGE1_PAGEVERSION (0x00) + +/* values for the BiosOptions field */ +#define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE (0x00000400) +#define MPI_BIOSPAGE1_OPTIONS_FC_ENABLE (0x00000200) +#define MPI_BIOSPAGE1_OPTIONS_SAS_ENABLE (0x00000100) +#define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) + +/* values for the IOCSettings field */ +#define MPI_BIOSPAGE1_IOCSET_MASK_SPINUP_DELAY (0x00000F00) +#define MPI_BIOSPAGE1_IOCSET_SHIFT_SPINUP_DELAY (8) + +#define MPI_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0) +#define MPI_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000) +#define MPI_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040) +#define MPI_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080) + +#define MPI_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030) +#define MPI_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000) +#define MPI_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010) +#define MPI_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020) +#define MPI_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030) + +#define MPI_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008) + +/* values for the DeviceSettings field */ +#define MPI_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008) +#define MPI_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004) +#define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) +#define MPI_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) + + +/**************************************************************************** +* SCSI Port Config Pages +****************************************************************************/ + +typedef struct _CONFIG_PAGE_SCSI_PORT_0 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 Capabilities; /* 04h */ + U32 PhysicalInterface; /* 08h */ +} fCONFIG_PAGE_SCSI_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_0, + SCSIPortPage0_t, MPI_POINTER pSCSIPortPage0_t; + +#define MPI_SCSIPORTPAGE0_PAGEVERSION (0x01) + +#define MPI_SCSIPORTPAGE0_CAP_IU (0x00000001) +#define MPI_SCSIPORTPAGE0_CAP_DT (0x00000002) +#define MPI_SCSIPORTPAGE0_CAP_QAS (0x00000004) +#define MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK (0x0000FF00) +#define MPI_SCSIPORTPAGE0_SYNC_ASYNC (0x00) +#define MPI_SCSIPORTPAGE0_SYNC_5 (0x32) +#define MPI_SCSIPORTPAGE0_SYNC_10 (0x19) +#define MPI_SCSIPORTPAGE0_SYNC_20 (0x0C) +#define MPI_SCSIPORTPAGE0_SYNC_33_33 (0x0B) +#define MPI_SCSIPORTPAGE0_SYNC_40 (0x0A) +#define MPI_SCSIPORTPAGE0_SYNC_80 (0x09) +#define MPI_SCSIPORTPAGE0_SYNC_160 (0x08) +#define MPI_SCSIPORTPAGE0_SYNC_UNKNOWN (0xFF) + +#define MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD (8) +#define MPI_SCSIPORTPAGE0_CAP_GET_MIN_SYNC_PERIOD(Cap) \ + ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MIN_SYNC_PERIOD) \ + >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD \ + ) +#define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK (0x00FF0000) +#define MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET (16) +#define MPI_SCSIPORTPAGE0_CAP_GET_MAX_SYNC_OFFSET(Cap) \ + ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MAX_SYNC_OFFSET) \ + >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET \ + ) +#define MPI_SCSIPORTPAGE0_CAP_WIDE (0x20000000) +#define MPI_SCSIPORTPAGE0_CAP_AIP (0x80000000) + +#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK (0x00000003) +#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD (0x01) +#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE (0x02) +#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_LVD (0x03) +#define MPI_SCSIPORTPAGE0_PHY_MASK_CONNECTED_ID (0xFF000000) +#define MPI_SCSIPORTPAGE0_PHY_SHIFT_CONNECTED_ID (24) +#define MPI_SCSIPORTPAGE0_PHY_BUS_FREE_CONNECTED_ID (0xFE) +#define MPI_SCSIPORTPAGE0_PHY_UNKNOWN_CONNECTED_ID (0xFF) + + +typedef struct _CONFIG_PAGE_SCSI_PORT_1 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 Configuration; /* 04h */ + U32 OnBusTimerValue; /* 08h */ + U8 TargetConfig; /* 0Ch */ + U8 Reserved1; /* 0Dh */ + U16 IDConfig; /* 0Eh */ +} fCONFIG_PAGE_SCSI_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_1, + SCSIPortPage1_t, MPI_POINTER pSCSIPortPage1_t; + +#define MPI_SCSIPORTPAGE1_PAGEVERSION (0x03) + +/* Configuration values */ +#define MPI_SCSIPORTPAGE1_CFG_PORT_SCSI_ID_MASK (0x000000FF) +#define MPI_SCSIPORTPAGE1_CFG_PORT_RESPONSE_ID_MASK (0xFFFF0000) +#define MPI_SCSIPORTPAGE1_CFG_SHIFT_PORT_RESPONSE_ID (16) + +/* TargetConfig values */ +#define MPI_SCSIPORTPAGE1_TARGCONFIG_TARG_ONLY (0x01) +#define MPI_SCSIPORTPAGE1_TARGCONFIG_INIT_TARG (0x02) + + +typedef struct _MPI_DEVICE_INFO +{ + U8 Timeout; /* 00h */ + U8 SyncFactor; /* 01h */ + U16 DeviceFlags; /* 02h */ +} MPI_DEVICE_INFO, MPI_POINTER PTR_MPI_DEVICE_INFO, + MpiDeviceInfo_t, MPI_POINTER pMpiDeviceInfo_t; + +typedef struct _CONFIG_PAGE_SCSI_PORT_2 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 PortFlags; /* 04h */ + U32 PortSettings; /* 08h */ + MPI_DEVICE_INFO DeviceSettings[16]; /* 0Ch */ +} fCONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_2, + SCSIPortPage2_t, MPI_POINTER pSCSIPortPage2_t; + +#define MPI_SCSIPORTPAGE2_PAGEVERSION (0x02) + +/* PortFlags values */ +#define MPI_SCSIPORTPAGE2_PORT_FLAGS_SCAN_HIGH_TO_LOW (0x00000001) +#define MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET (0x00000004) +#define MPI_SCSIPORTPAGE2_PORT_FLAGS_ALTERNATE_CHS (0x00000008) +#define MPI_SCSIPORTPAGE2_PORT_FLAGS_TERMINATION_DISABLE (0x00000010) + +#define MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK (0x00000060) +#define MPI_SCSIPORTPAGE2_PORT_FLAGS_FULL_DV (0x00000000) +#define MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY (0x00000020) +#define MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV (0x00000060) + + +/* PortSettings values */ +#define MPI_SCSIPORTPAGE2_PORT_HOST_ID_MASK (0x0000000F) +#define MPI_SCSIPORTPAGE2_PORT_MASK_INIT_HBA (0x00000030) +#define MPI_SCSIPORTPAGE2_PORT_DISABLE_INIT_HBA (0x00000000) +#define MPI_SCSIPORTPAGE2_PORT_BIOS_INIT_HBA (0x00000010) +#define MPI_SCSIPORTPAGE2_PORT_OS_INIT_HBA (0x00000020) +#define MPI_SCSIPORTPAGE2_PORT_BIOS_OS_INIT_HBA (0x00000030) +#define MPI_SCSIPORTPAGE2_PORT_REMOVABLE_MEDIA (0x000000C0) +#define MPI_SCSIPORTPAGE2_PORT_RM_NONE (0x00000000) +#define MPI_SCSIPORTPAGE2_PORT_RM_BOOT_ONLY (0x00000040) +#define MPI_SCSIPORTPAGE2_PORT_RM_WITH_MEDIA (0x00000080) +#define MPI_SCSIPORTPAGE2_PORT_SPINUP_DELAY_MASK (0x00000F00) +#define MPI_SCSIPORTPAGE2_PORT_SHIFT_SPINUP_DELAY (8) +#define MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS (0x00003000) +#define MPI_SCSIPORTPAGE2_PORT_NEGO_MASTER_SETTINGS (0x00000000) +#define MPI_SCSIPORTPAGE2_PORT_NONE_MASTER_SETTINGS (0x00001000) +#define MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS (0x00003000) + +#define MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE (0x0001) +#define MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE (0x0002) +#define MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE (0x0004) +#define MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE (0x0008) +#define MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE (0x0010) +#define MPI_SCSIPORTPAGE2_DEVICE_BOOT_CHOICE (0x0020) + + +/**************************************************************************** +* SCSI Target Device Config Pages +****************************************************************************/ + +typedef struct _CONFIG_PAGE_SCSI_DEVICE_0 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 NegotiatedParameters; /* 04h */ + U32 Information; /* 08h */ +} fCONFIG_PAGE_SCSI_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_0, + SCSIDevicePage0_t, MPI_POINTER pSCSIDevicePage0_t; + +#define MPI_SCSIDEVPAGE0_PAGEVERSION (0x03) + +#define MPI_SCSIDEVPAGE0_NP_IU (0x00000001) +#define MPI_SCSIDEVPAGE0_NP_DT (0x00000002) +#define MPI_SCSIDEVPAGE0_NP_QAS (0x00000004) +#define MPI_SCSIDEVPAGE0_NP_HOLD_MCS (0x00000008) +#define MPI_SCSIDEVPAGE0_NP_WR_FLOW (0x00000010) +#define MPI_SCSIDEVPAGE0_NP_RD_STRM (0x00000020) +#define MPI_SCSIDEVPAGE0_NP_RTI (0x00000040) +#define MPI_SCSIDEVPAGE0_NP_PCOMP_EN (0x00000080) +#define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK (0x0000FF00) +#define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD (8) +#define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK (0x00FF0000) +#define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET (16) +#define MPI_SCSIDEVPAGE0_NP_WIDE (0x20000000) +#define MPI_SCSIDEVPAGE0_NP_AIP (0x80000000) + +#define MPI_SCSIDEVPAGE0_INFO_PARAMS_NEGOTIATED (0x00000001) +#define MPI_SCSIDEVPAGE0_INFO_SDTR_REJECTED (0x00000002) +#define MPI_SCSIDEVPAGE0_INFO_WDTR_REJECTED (0x00000004) +#define MPI_SCSIDEVPAGE0_INFO_PPR_REJECTED (0x00000008) + + +typedef struct _CONFIG_PAGE_SCSI_DEVICE_1 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 RequestedParameters; /* 04h */ + U32 Reserved; /* 08h */ + U32 Configuration; /* 0Ch */ +} fCONFIG_PAGE_SCSI_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_1, + SCSIDevicePage1_t, MPI_POINTER pSCSIDevicePage1_t; + +#define MPI_SCSIDEVPAGE1_PAGEVERSION (0x04) + +#define MPI_SCSIDEVPAGE1_RP_IU (0x00000001) +#define MPI_SCSIDEVPAGE1_RP_DT (0x00000002) +#define MPI_SCSIDEVPAGE1_RP_QAS (0x00000004) +#define MPI_SCSIDEVPAGE1_RP_HOLD_MCS (0x00000008) +#define MPI_SCSIDEVPAGE1_RP_WR_FLOW (0x00000010) +#define MPI_SCSIDEVPAGE1_RP_RD_STRM (0x00000020) +#define MPI_SCSIDEVPAGE1_RP_RTI (0x00000040) +#define MPI_SCSIDEVPAGE1_RP_PCOMP_EN (0x00000080) +#define MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK (0x0000FF00) +#define MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD (8) +#define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK (0x00FF0000) +#define MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET (16) +#define MPI_SCSIDEVPAGE1_RP_WIDE (0x20000000) +#define MPI_SCSIDEVPAGE1_RP_AIP (0x80000000) + +#define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED (0x00000002) +#define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED (0x00000004) +#define MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE (0x00000008) +#define MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG (0x00000010) + + +typedef struct _CONFIG_PAGE_SCSI_DEVICE_2 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 DomainValidation; /* 04h */ + U32 ParityPipeSelect; /* 08h */ + U32 DataPipeSelect; /* 0Ch */ +} fCONFIG_PAGE_SCSI_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_2, + SCSIDevicePage2_t, MPI_POINTER pSCSIDevicePage2_t; + +#define MPI_SCSIDEVPAGE2_PAGEVERSION (0x01) + +#define MPI_SCSIDEVPAGE2_DV_ISI_ENABLE (0x00000010) +#define MPI_SCSIDEVPAGE2_DV_SECONDARY_DRIVER_ENABLE (0x00000020) +#define MPI_SCSIDEVPAGE2_DV_SLEW_RATE_CTRL (0x00000380) +#define MPI_SCSIDEVPAGE2_DV_PRIM_DRIVE_STR_CTRL (0x00001C00) +#define MPI_SCSIDEVPAGE2_DV_SECOND_DRIVE_STR_CTRL (0x0000E000) +#define MPI_SCSIDEVPAGE2_DV_XCLKH_ST (0x10000000) +#define MPI_SCSIDEVPAGE2_DV_XCLKS_ST (0x20000000) +#define MPI_SCSIDEVPAGE2_DV_XCLKH_DT (0x40000000) +#define MPI_SCSIDEVPAGE2_DV_XCLKS_DT (0x80000000) + +#define MPI_SCSIDEVPAGE2_PPS_PPS_MASK (0x00000003) + +#define MPI_SCSIDEVPAGE2_DPS_BIT_0_PL_SELECT_MASK (0x00000003) +#define MPI_SCSIDEVPAGE2_DPS_BIT_1_PL_SELECT_MASK (0x0000000C) +#define MPI_SCSIDEVPAGE2_DPS_BIT_2_PL_SELECT_MASK (0x00000030) +#define MPI_SCSIDEVPAGE2_DPS_BIT_3_PL_SELECT_MASK (0x000000C0) +#define MPI_SCSIDEVPAGE2_DPS_BIT_4_PL_SELECT_MASK (0x00000300) +#define MPI_SCSIDEVPAGE2_DPS_BIT_5_PL_SELECT_MASK (0x00000C00) +#define MPI_SCSIDEVPAGE2_DPS_BIT_6_PL_SELECT_MASK (0x00003000) +#define MPI_SCSIDEVPAGE2_DPS_BIT_7_PL_SELECT_MASK (0x0000C000) +#define MPI_SCSIDEVPAGE2_DPS_BIT_8_PL_SELECT_MASK (0x00030000) +#define MPI_SCSIDEVPAGE2_DPS_BIT_9_PL_SELECT_MASK (0x000C0000) +#define MPI_SCSIDEVPAGE2_DPS_BIT_10_PL_SELECT_MASK (0x00300000) +#define MPI_SCSIDEVPAGE2_DPS_BIT_11_PL_SELECT_MASK (0x00C00000) +#define MPI_SCSIDEVPAGE2_DPS_BIT_12_PL_SELECT_MASK (0x03000000) +#define MPI_SCSIDEVPAGE2_DPS_BIT_13_PL_SELECT_MASK (0x0C000000) +#define MPI_SCSIDEVPAGE2_DPS_BIT_14_PL_SELECT_MASK (0x30000000) +#define MPI_SCSIDEVPAGE2_DPS_BIT_15_PL_SELECT_MASK (0xC0000000) + + +typedef struct _CONFIG_PAGE_SCSI_DEVICE_3 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U16 MsgRejectCount; /* 04h */ + U16 PhaseErrorCount; /* 06h */ + U16 ParityErrorCount; /* 08h */ + U16 Reserved; /* 0Ah */ +} fCONFIG_PAGE_SCSI_DEVICE_3, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_3, + SCSIDevicePage3_t, MPI_POINTER pSCSIDevicePage3_t; + +#define MPI_SCSIDEVPAGE3_PAGEVERSION (0x00) + +#define MPI_SCSIDEVPAGE3_MAX_COUNTER (0xFFFE) +#define MPI_SCSIDEVPAGE3_UNSUPPORTED_COUNTER (0xFFFF) + + +/**************************************************************************** +* FC Port Config Pages +****************************************************************************/ + +typedef struct _CONFIG_PAGE_FC_PORT_0 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 Flags; /* 04h */ + U8 MPIPortNumber; /* 08h */ + U8 LinkType; /* 09h */ + U8 PortState; /* 0Ah */ + U8 Reserved; /* 0Bh */ + U32 PortIdentifier; /* 0Ch */ + U64 WWNN; /* 10h */ + U64 WWPN; /* 18h */ + U32 SupportedServiceClass; /* 20h */ + U32 SupportedSpeeds; /* 24h */ + U32 CurrentSpeed; /* 28h */ + U32 MaxFrameSize; /* 2Ch */ + U64 FabricWWNN; /* 30h */ + U64 FabricWWPN; /* 38h */ + U32 DiscoveredPortsCount; /* 40h */ + U32 MaxInitiators; /* 44h */ + U8 MaxAliasesSupported; /* 48h */ + U8 MaxHardAliasesSupported; /* 49h */ + U8 NumCurrentAliases; /* 4Ah */ + U8 Reserved1; /* 4Bh */ +} fCONFIG_PAGE_FC_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_0, + FCPortPage0_t, MPI_POINTER pFCPortPage0_t; + +#define MPI_FCPORTPAGE0_PAGEVERSION (0x02) + +#define MPI_FCPORTPAGE0_FLAGS_PROT_MASK (0x0000000F) +#define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_INIT (MPI_PORTFACTS_PROTOCOL_INITIATOR) +#define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_TARG (MPI_PORTFACTS_PROTOCOL_TARGET) +#define MPI_FCPORTPAGE0_FLAGS_PROT_LAN (MPI_PORTFACTS_PROTOCOL_LAN) +#define MPI_FCPORTPAGE0_FLAGS_PROT_LOGBUSADDR (MPI_PORTFACTS_PROTOCOL_LOGBUSADDR) + +#define MPI_FCPORTPAGE0_FLAGS_ALIAS_ALPA_SUPPORTED (0x00000010) +#define MPI_FCPORTPAGE0_FLAGS_ALIAS_WWN_SUPPORTED (0x00000020) +#define MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID (0x00000040) + +#define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK (0x00000F00) +#define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT (0x00000000) +#define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT (0x00000100) +#define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP (0x00000200) +#define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT (0x00000400) +#define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP (0x00000800) + +#define MPI_FCPORTPAGE0_LTYPE_RESERVED (0x00) +#define MPI_FCPORTPAGE0_LTYPE_OTHER (0x01) +#define MPI_FCPORTPAGE0_LTYPE_UNKNOWN (0x02) +#define MPI_FCPORTPAGE0_LTYPE_COPPER (0x03) +#define MPI_FCPORTPAGE0_LTYPE_SINGLE_1300 (0x04) +#define MPI_FCPORTPAGE0_LTYPE_SINGLE_1500 (0x05) +#define MPI_FCPORTPAGE0_LTYPE_50_LASER_MULTI (0x06) +#define MPI_FCPORTPAGE0_LTYPE_50_LED_MULTI (0x07) +#define MPI_FCPORTPAGE0_LTYPE_62_LASER_MULTI (0x08) +#define MPI_FCPORTPAGE0_LTYPE_62_LED_MULTI (0x09) +#define MPI_FCPORTPAGE0_LTYPE_MULTI_LONG_WAVE (0x0A) +#define MPI_FCPORTPAGE0_LTYPE_MULTI_SHORT_WAVE (0x0B) +#define MPI_FCPORTPAGE0_LTYPE_LASER_SHORT_WAVE (0x0C) +#define MPI_FCPORTPAGE0_LTYPE_LED_SHORT_WAVE (0x0D) +#define MPI_FCPORTPAGE0_LTYPE_1300_LONG_WAVE (0x0E) +#define MPI_FCPORTPAGE0_LTYPE_1500_LONG_WAVE (0x0F) + +#define MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN (0x01) /*(SNIA)HBA_PORTSTATE_UNKNOWN 1 Unknown */ +#define MPI_FCPORTPAGE0_PORTSTATE_ONLINE (0x02) /*(SNIA)HBA_PORTSTATE_ONLINE 2 Operational */ +#define MPI_FCPORTPAGE0_PORTSTATE_OFFLINE (0x03) /*(SNIA)HBA_PORTSTATE_OFFLINE 3 User Offline */ +#define MPI_FCPORTPAGE0_PORTSTATE_BYPASSED (0x04) /*(SNIA)HBA_PORTSTATE_BYPASSED 4 Bypassed */ +#define MPI_FCPORTPAGE0_PORTSTATE_DIAGNOST (0x05) /*(SNIA)HBA_PORTSTATE_DIAGNOSTICS 5 In diagnostics mode */ +#define MPI_FCPORTPAGE0_PORTSTATE_LINKDOWN (0x06) /*(SNIA)HBA_PORTSTATE_LINKDOWN 6 Link Down */ +#define MPI_FCPORTPAGE0_PORTSTATE_ERROR (0x07) /*(SNIA)HBA_PORTSTATE_ERROR 7 Port Error */ +#define MPI_FCPORTPAGE0_PORTSTATE_LOOPBACK (0x08) /*(SNIA)HBA_PORTSTATE_LOOPBACK 8 Loopback */ + +#define MPI_FCPORTPAGE0_SUPPORT_CLASS_1 (0x00000001) +#define MPI_FCPORTPAGE0_SUPPORT_CLASS_2 (0x00000002) +#define MPI_FCPORTPAGE0_SUPPORT_CLASS_3 (0x00000004) + +#define MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN (0x00000000) /* (SNIA)HBA_PORTSPEED_UNKNOWN 0 Unknown - transceiver incapable of reporting */ +#define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED (0x00000001) /* (SNIA)HBA_PORTSPEED_1GBIT 1 1 GBit/sec */ +#define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED (0x00000002) /* (SNIA)HBA_PORTSPEED_2GBIT 2 2 GBit/sec */ +#define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED (0x00000004) /* (SNIA)HBA_PORTSPEED_10GBIT 4 10 GBit/sec */ +#define MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED (0x00000008) /* (SNIA)HBA_PORTSPEED_4GBIT 8 4 GBit/sec */ + +#define MPI_FCPORTPAGE0_CURRENT_SPEED_UKNOWN MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN +#define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED +#define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED +#define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED +#define MPI_FCPORTPAGE0_CURRENT_SPEED_4GBIT MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED +#define MPI_FCPORTPAGE0_CURRENT_SPEED_NOT_NEGOTIATED (0x00008000) /* (SNIA)HBA_PORTSPEED_NOT_NEGOTIATED (1<<15) Speed not established */ + + + +typedef struct _CONFIG_PAGE_FC_PORT_1 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 Flags; /* 04h */ + U64 NoSEEPROMWWNN; /* 08h */ + U64 NoSEEPROMWWPN; /* 10h */ + U8 HardALPA; /* 18h */ + U8 LinkConfig; /* 19h */ + U8 TopologyConfig; /* 1Ah */ + U8 AltConnector; /* 1Bh */ + U8 NumRequestedAliases; /* 1Ch */ + U8 RR_TOV; /* 1Dh */ + U8 InitiatorDeviceTimeout; /* 1Eh */ + U8 InitiatorIoPendTimeout; /* 1Fh */ +} fCONFIG_PAGE_FC_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_1, + FCPortPage1_t, MPI_POINTER pFCPortPage1_t; + +#define MPI_FCPORTPAGE1_PAGEVERSION (0x06) + +#define MPI_FCPORTPAGE1_FLAGS_EXT_FCP_STATUS_EN (0x08000000) +#define MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY (0x04000000) +#define MPI_FCPORTPAGE1_FLAGS_FORCE_USE_NOSEEPROM_WWNS (0x02000000) +#define MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS (0x01000000) +#define MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID (0x00800000) +#define MPI_FCPORTPAGE1_FLAGS_PORT_OFFLINE (0x00400000) +#define MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK (0x00200000) +#define MPI_FCPORTPAGE1_FLAGS_MASK_RR_TOV_UNITS (0x00000070) +#define MPI_FCPORTPAGE1_FLAGS_SUPPRESS_PROT_REG (0x00000008) +#define MPI_FCPORTPAGE1_FLAGS_PLOGI_ON_LOGO (0x00000004) +#define MPI_FCPORTPAGE1_FLAGS_MAINTAIN_LOGINS (0x00000002) +#define MPI_FCPORTPAGE1_FLAGS_SORT_BY_DID (0x00000001) +#define MPI_FCPORTPAGE1_FLAGS_SORT_BY_WWN (0x00000000) + +#define MPI_FCPORTPAGE1_FLAGS_PROT_MASK (0xF0000000) +#define MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT (28) +#define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT ((U32)MPI_PORTFACTS_PROTOCOL_INITIATOR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) +#define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG ((U32)MPI_PORTFACTS_PROTOCOL_TARGET << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) +#define MPI_FCPORTPAGE1_FLAGS_PROT_LAN ((U32)MPI_PORTFACTS_PROTOCOL_LAN << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) +#define MPI_FCPORTPAGE1_FLAGS_PROT_LOGBUSADDR ((U32)MPI_PORTFACTS_PROTOCOL_LOGBUSADDR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) + +#define MPI_FCPORTPAGE1_FLAGS_NONE_RR_TOV_UNITS (0x00000000) +#define MPI_FCPORTPAGE1_FLAGS_THOUSANDTH_RR_TOV_UNITS (0x00000010) +#define MPI_FCPORTPAGE1_FLAGS_TENTH_RR_TOV_UNITS (0x00000030) +#define MPI_FCPORTPAGE1_FLAGS_TEN_RR_TOV_UNITS (0x00000050) + +#define MPI_FCPORTPAGE1_HARD_ALPA_NOT_USED (0xFF) + +#define MPI_FCPORTPAGE1_LCONFIG_SPEED_MASK (0x0F) +#define MPI_FCPORTPAGE1_LCONFIG_SPEED_1GIG (0x00) +#define MPI_FCPORTPAGE1_LCONFIG_SPEED_2GIG (0x01) +#define MPI_FCPORTPAGE1_LCONFIG_SPEED_4GIG (0x02) +#define MPI_FCPORTPAGE1_LCONFIG_SPEED_10GIG (0x03) +#define MPI_FCPORTPAGE1_LCONFIG_SPEED_AUTO (0x0F) + +#define MPI_FCPORTPAGE1_TOPOLOGY_MASK (0x0F) +#define MPI_FCPORTPAGE1_TOPOLOGY_NLPORT (0x01) +#define MPI_FCPORTPAGE1_TOPOLOGY_NPORT (0x02) +#define MPI_FCPORTPAGE1_TOPOLOGY_AUTO (0x0F) + +#define MPI_FCPORTPAGE1_ALT_CONN_UNKNOWN (0x00) + +#define MPI_FCPORTPAGE1_INITIATOR_DEV_TIMEOUT_MASK (0x7F) + + +typedef struct _CONFIG_PAGE_FC_PORT_2 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U8 NumberActive; /* 04h */ + U8 ALPA[127]; /* 05h */ +} fCONFIG_PAGE_FC_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_2, + FCPortPage2_t, MPI_POINTER pFCPortPage2_t; + +#define MPI_FCPORTPAGE2_PAGEVERSION (0x01) + + +typedef struct _WWN_FORMAT +{ + U64 WWNN; /* 00h */ + U64 WWPN; /* 08h */ +} WWN_FORMAT, MPI_POINTER PTR_WWN_FORMAT, + WWNFormat, MPI_POINTER pWWNFormat; + +typedef union _FC_PORT_PERSISTENT_PHYSICAL_ID +{ + WWN_FORMAT WWN; + U32 Did; +} FC_PORT_PERSISTENT_PHYSICAL_ID, MPI_POINTER PTR_FC_PORT_PERSISTENT_PHYSICAL_ID, + PersistentPhysicalId_t, MPI_POINTER pPersistentPhysicalId_t; + +typedef struct _FC_PORT_PERSISTENT +{ + FC_PORT_PERSISTENT_PHYSICAL_ID PhysicalIdentifier; /* 00h */ + U8 TargetID; /* 10h */ + U8 Bus; /* 11h */ + U16 Flags; /* 12h */ +} FC_PORT_PERSISTENT, MPI_POINTER PTR_FC_PORT_PERSISTENT, + PersistentData_t, MPI_POINTER pPersistentData_t; + +#define MPI_PERSISTENT_FLAGS_SHIFT (16) +#define MPI_PERSISTENT_FLAGS_ENTRY_VALID (0x0001) +#define MPI_PERSISTENT_FLAGS_SCAN_ID (0x0002) +#define MPI_PERSISTENT_FLAGS_SCAN_LUNS (0x0004) +#define MPI_PERSISTENT_FLAGS_BOOT_DEVICE (0x0008) +#define MPI_PERSISTENT_FLAGS_BY_DID (0x0080) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI_FC_PORT_PAGE_3_ENTRY_MAX +#define MPI_FC_PORT_PAGE_3_ENTRY_MAX (1) +#endif + +typedef struct _CONFIG_PAGE_FC_PORT_3 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + FC_PORT_PERSISTENT Entry[MPI_FC_PORT_PAGE_3_ENTRY_MAX]; /* 04h */ +} fCONFIG_PAGE_FC_PORT_3, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_3, + FCPortPage3_t, MPI_POINTER pFCPortPage3_t; + +#define MPI_FCPORTPAGE3_PAGEVERSION (0x01) + + +typedef struct _CONFIG_PAGE_FC_PORT_4 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 PortFlags; /* 04h */ + U32 PortSettings; /* 08h */ +} fCONFIG_PAGE_FC_PORT_4, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_4, + FCPortPage4_t, MPI_POINTER pFCPortPage4_t; + +#define MPI_FCPORTPAGE4_PAGEVERSION (0x00) + +#define MPI_FCPORTPAGE4_PORT_FLAGS_ALTERNATE_CHS (0x00000008) + +#define MPI_FCPORTPAGE4_PORT_MASK_INIT_HBA (0x00000030) +#define MPI_FCPORTPAGE4_PORT_DISABLE_INIT_HBA (0x00000000) +#define MPI_FCPORTPAGE4_PORT_BIOS_INIT_HBA (0x00000010) +#define MPI_FCPORTPAGE4_PORT_OS_INIT_HBA (0x00000020) +#define MPI_FCPORTPAGE4_PORT_BIOS_OS_INIT_HBA (0x00000030) +#define MPI_FCPORTPAGE4_PORT_REMOVABLE_MEDIA (0x000000C0) +#define MPI_FCPORTPAGE4_PORT_SPINUP_DELAY_MASK (0x00000F00) + + +typedef struct _CONFIG_PAGE_FC_PORT_5_ALIAS_INFO +{ + U8 Flags; /* 00h */ + U8 AliasAlpa; /* 01h */ + U16 Reserved; /* 02h */ + U64 AliasWWNN; /* 04h */ + U64 AliasWWPN; /* 0Ch */ +} fCONFIG_PAGE_FC_PORT_5_ALIAS_INFO, + MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5_ALIAS_INFO, + FcPortPage5AliasInfo_t, MPI_POINTER pFcPortPage5AliasInfo_t; + +typedef struct _CONFIG_PAGE_FC_PORT_5 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + fCONFIG_PAGE_FC_PORT_5_ALIAS_INFO AliasInfo; /* 04h */ +} fCONFIG_PAGE_FC_PORT_5, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5, + FCPortPage5_t, MPI_POINTER pFCPortPage5_t; + +#define MPI_FCPORTPAGE5_PAGEVERSION (0x02) + +#define MPI_FCPORTPAGE5_FLAGS_ALPA_ACQUIRED (0x01) +#define MPI_FCPORTPAGE5_FLAGS_HARD_ALPA (0x02) +#define MPI_FCPORTPAGE5_FLAGS_HARD_WWNN (0x04) +#define MPI_FCPORTPAGE5_FLAGS_HARD_WWPN (0x08) +#define MPI_FCPORTPAGE5_FLAGS_DISABLE (0x10) + +typedef struct _CONFIG_PAGE_FC_PORT_6 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 Reserved; /* 04h */ + U64 TimeSinceReset; /* 08h */ + U64 TxFrames; /* 10h */ + U64 RxFrames; /* 18h */ + U64 TxWords; /* 20h */ + U64 RxWords; /* 28h */ + U64 LipCount; /* 30h */ + U64 NosCount; /* 38h */ + U64 ErrorFrames; /* 40h */ + U64 DumpedFrames; /* 48h */ + U64 LinkFailureCount; /* 50h */ + U64 LossOfSyncCount; /* 58h */ + U64 LossOfSignalCount; /* 60h */ + U64 PrimativeSeqErrCount; /* 68h */ + U64 InvalidTxWordCount; /* 70h */ + U64 InvalidCrcCount; /* 78h */ + U64 FcpInitiatorIoCount; /* 80h */ +} fCONFIG_PAGE_FC_PORT_6, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_6, + FCPortPage6_t, MPI_POINTER pFCPortPage6_t; + +#define MPI_FCPORTPAGE6_PAGEVERSION (0x00) + + +typedef struct _CONFIG_PAGE_FC_PORT_7 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 Reserved; /* 04h */ + U8 PortSymbolicName[256]; /* 08h */ +} fCONFIG_PAGE_FC_PORT_7, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_7, + FCPortPage7_t, MPI_POINTER pFCPortPage7_t; + +#define MPI_FCPORTPAGE7_PAGEVERSION (0x00) + + +typedef struct _CONFIG_PAGE_FC_PORT_8 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 BitVector[8]; /* 04h */ +} fCONFIG_PAGE_FC_PORT_8, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_8, + FCPortPage8_t, MPI_POINTER pFCPortPage8_t; + +#define MPI_FCPORTPAGE8_PAGEVERSION (0x00) + + +typedef struct _CONFIG_PAGE_FC_PORT_9 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U32 Reserved; /* 04h */ + U64 GlobalWWPN; /* 08h */ + U64 GlobalWWNN; /* 10h */ + U32 UnitType; /* 18h */ + U32 PhysicalPortNumber; /* 1Ch */ + U32 NumAttachedNodes; /* 20h */ + U16 IPVersion; /* 24h */ + U16 UDPPortNumber; /* 26h */ + U8 IPAddress[16]; /* 28h */ + U16 Reserved1; /* 38h */ + U16 TopologyDiscoveryFlags; /* 3Ah */ +} fCONFIG_PAGE_FC_PORT_9, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_9, + FCPortPage9_t, MPI_POINTER pFCPortPage9_t; + +#define MPI_FCPORTPAGE9_PAGEVERSION (0x00) + + +typedef struct _CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA +{ + U8 Id; /* 10h */ + U8 ExtId; /* 11h */ + U8 Connector; /* 12h */ + U8 Transceiver[8]; /* 13h */ + U8 Encoding; /* 1Bh */ + U8 BitRate_100mbs; /* 1Ch */ + U8 Reserved1; /* 1Dh */ + U8 Length9u_km; /* 1Eh */ + U8 Length9u_100m; /* 1Fh */ + U8 Length50u_10m; /* 20h */ + U8 Length62p5u_10m; /* 21h */ + U8 LengthCopper_m; /* 22h */ + U8 Reseverved2; /* 22h */ + U8 VendorName[16]; /* 24h */ + U8 Reserved3; /* 34h */ + U8 VendorOUI[3]; /* 35h */ + U8 VendorPN[16]; /* 38h */ + U8 VendorRev[4]; /* 48h */ + U16 Reserved4; /* 4Ch */ + U8 Reserved5; /* 4Eh */ + U8 CC_BASE; /* 4Fh */ +} fCONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA, + MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA, + FCPortPage10BaseSfpData_t, MPI_POINTER pFCPortPage10BaseSfpData_t; + +#define MPI_FCPORT10_BASE_ID_UNKNOWN (0x00) +#define MPI_FCPORT10_BASE_ID_GBIC (0x01) +#define MPI_FCPORT10_BASE_ID_FIXED (0x02) +#define MPI_FCPORT10_BASE_ID_SFP (0x03) +#define MPI_FCPORT10_BASE_ID_SFP_MIN (0x04) +#define MPI_FCPORT10_BASE_ID_SFP_MAX (0x7F) +#define MPI_FCPORT10_BASE_ID_VEND_SPEC_MASK (0x80) + +#define MPI_FCPORT10_BASE_EXTID_UNKNOWN (0x00) +#define MPI_FCPORT10_BASE_EXTID_MODDEF1 (0x01) +#define MPI_FCPORT10_BASE_EXTID_MODDEF2 (0x02) +#define MPI_FCPORT10_BASE_EXTID_MODDEF3 (0x03) +#define MPI_FCPORT10_BASE_EXTID_SEEPROM (0x04) +#define MPI_FCPORT10_BASE_EXTID_MODDEF5 (0x05) +#define MPI_FCPORT10_BASE_EXTID_MODDEF6 (0x06) +#define MPI_FCPORT10_BASE_EXTID_MODDEF7 (0x07) +#define MPI_FCPORT10_BASE_EXTID_VNDSPC_MASK (0x80) + +#define MPI_FCPORT10_BASE_CONN_UNKNOWN (0x00) +#define MPI_FCPORT10_BASE_CONN_SC (0x01) +#define MPI_FCPORT10_BASE_CONN_COPPER1 (0x02) +#define MPI_FCPORT10_BASE_CONN_COPPER2 (0x03) +#define MPI_FCPORT10_BASE_CONN_BNC_TNC (0x04) +#define MPI_FCPORT10_BASE_CONN_COAXIAL (0x05) +#define MPI_FCPORT10_BASE_CONN_FIBERJACK (0x06) +#define MPI_FCPORT10_BASE_CONN_LC (0x07) +#define MPI_FCPORT10_BASE_CONN_MT_RJ (0x08) +#define MPI_FCPORT10_BASE_CONN_MU (0x09) +#define MPI_FCPORT10_BASE_CONN_SG (0x0A) +#define MPI_FCPORT10_BASE_CONN_OPT_PIGT (0x0B) +#define MPI_FCPORT10_BASE_CONN_RSV1_MIN (0x0C) +#define MPI_FCPORT10_BASE_CONN_RSV1_MAX (0x1F) +#define MPI_FCPORT10_BASE_CONN_HSSDC_II (0x20) +#define MPI_FCPORT10_BASE_CONN_CPR_PIGT (0x21) +#define MPI_FCPORT10_BASE_CONN_RSV2_MIN (0x22) +#define MPI_FCPORT10_BASE_CONN_RSV2_MAX (0x7F) +#define MPI_FCPORT10_BASE_CONN_VNDSPC_MASK (0x80) + +#define MPI_FCPORT10_BASE_ENCODE_UNSPEC (0x00) +#define MPI_FCPORT10_BASE_ENCODE_8B10B (0x01) +#define MPI_FCPORT10_BASE_ENCODE_4B5B (0x02) +#define MPI_FCPORT10_BASE_ENCODE_NRZ (0x03) +#define MPI_FCPORT10_BASE_ENCODE_MANCHESTER (0x04) + + +typedef struct _CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA +{ + U8 Options[2]; /* 50h */ + U8 BitRateMax; /* 52h */ + U8 BitRateMin; /* 53h */ + U8 VendorSN[16]; /* 54h */ + U8 DateCode[8]; /* 64h */ + U8 Reserved5[3]; /* 6Ch */ + U8 CC_EXT; /* 6Fh */ +} fCONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA, + MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA, + FCPortPage10ExtendedSfpData_t, MPI_POINTER pFCPortPage10ExtendedSfpData_t; + +#define MPI_FCPORT10_EXT_OPTION1_RATESEL (0x20) +#define MPI_FCPORT10_EXT_OPTION1_TX_DISABLE (0x10) +#define MPI_FCPORT10_EXT_OPTION1_TX_FAULT (0x08) +#define MPI_FCPORT10_EXT_OPTION1_LOS_INVERT (0x04) +#define MPI_FCPORT10_EXT_OPTION1_LOS (0x02) + + +typedef struct _CONFIG_PAGE_FC_PORT_10 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U8 Flags; /* 04h */ + U8 Reserved1; /* 05h */ + U16 Reserved2; /* 06h */ + U32 HwConfig1; /* 08h */ + U32 HwConfig2; /* 0Ch */ + fCONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA Base; /* 10h */ + fCONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA Extended; /* 50h */ + U8 VendorSpecific[32]; /* 70h */ +} fCONFIG_PAGE_FC_PORT_10, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10, + FCPortPage10_t, MPI_POINTER pFCPortPage10_t; + +#define MPI_FCPORTPAGE10_PAGEVERSION (0x00) + +/* standard MODDEF pin definitions (from GBIC spec.) */ +#define MPI_FCPORTPAGE10_FLAGS_MODDEF_MASK (0x00000007) +#define MPI_FCPORTPAGE10_FLAGS_MODDEF2 (0x00000001) +#define MPI_FCPORTPAGE10_FLAGS_MODDEF1 (0x00000002) +#define MPI_FCPORTPAGE10_FLAGS_MODDEF0 (0x00000004) +#define MPI_FCPORTPAGE10_FLAGS_MODDEF_NOGBIC (0x00000007) +#define MPI_FCPORTPAGE10_FLAGS_MODDEF_CPR_IEEE_CX (0x00000006) +#define MPI_FCPORTPAGE10_FLAGS_MODDEF_COPPER (0x00000005) +#define MPI_FCPORTPAGE10_FLAGS_MODDEF_OPTICAL_LW (0x00000004) +#define MPI_FCPORTPAGE10_FLAGS_MODDEF_SEEPROM (0x00000003) +#define MPI_FCPORTPAGE10_FLAGS_MODDEF_SW_OPTICAL (0x00000002) +#define MPI_FCPORTPAGE10_FLAGS_MODDEF_LX_IEEE_OPT_LW (0x00000001) +#define MPI_FCPORTPAGE10_FLAGS_MODDEF_SX_IEEE_OPT_SW (0x00000000) + +#define MPI_FCPORTPAGE10_FLAGS_CC_BASE_OK (0x00000010) +#define MPI_FCPORTPAGE10_FLAGS_CC_EXT_OK (0x00000020) + + +/**************************************************************************** +* FC Device Config Pages +****************************************************************************/ + +typedef struct _CONFIG_PAGE_FC_DEVICE_0 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U64 WWNN; /* 04h */ + U64 WWPN; /* 0Ch */ + U32 PortIdentifier; /* 14h */ + U8 Protocol; /* 18h */ + U8 Flags; /* 19h */ + U16 BBCredit; /* 1Ah */ + U16 MaxRxFrameSize; /* 1Ch */ + U8 ADISCHardALPA; /* 1Eh */ + U8 PortNumber; /* 1Fh */ + U8 FcPhLowestVersion; /* 20h */ + U8 FcPhHighestVersion; /* 21h */ + U8 CurrentTargetID; /* 22h */ + U8 CurrentBus; /* 23h */ +} fCONFIG_PAGE_FC_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_FC_DEVICE_0, + FCDevicePage0_t, MPI_POINTER pFCDevicePage0_t; + +#define MPI_FC_DEVICE_PAGE0_PAGEVERSION (0x03) + +#define MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID (0x01) +#define MPI_FC_DEVICE_PAGE0_FLAGS_PLOGI_INVALID (0x02) +#define MPI_FC_DEVICE_PAGE0_FLAGS_PRLI_INVALID (0x04) + +#define MPI_FC_DEVICE_PAGE0_PROT_IP (0x01) +#define MPI_FC_DEVICE_PAGE0_PROT_FCP_TARGET (0x02) +#define MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR (0x04) +#define MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY (0x08) + +#define MPI_FC_DEVICE_PAGE0_PGAD_PORT_MASK (MPI_FC_DEVICE_PGAD_PORT_MASK) +#define MPI_FC_DEVICE_PAGE0_PGAD_FORM_MASK (MPI_FC_DEVICE_PGAD_FORM_MASK) +#define MPI_FC_DEVICE_PAGE0_PGAD_FORM_NEXT_DID (MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) +#define MPI_FC_DEVICE_PAGE0_PGAD_FORM_BUS_TID (MPI_FC_DEVICE_PGAD_FORM_BUS_TID) +#define MPI_FC_DEVICE_PAGE0_PGAD_DID_MASK (MPI_FC_DEVICE_PGAD_ND_DID_MASK) +#define MPI_FC_DEVICE_PAGE0_PGAD_BUS_MASK (MPI_FC_DEVICE_PGAD_BT_BUS_MASK) +#define MPI_FC_DEVICE_PAGE0_PGAD_BUS_SHIFT (MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT) +#define MPI_FC_DEVICE_PAGE0_PGAD_TID_MASK (MPI_FC_DEVICE_PGAD_BT_TID_MASK) + +#define MPI_FC_DEVICE_PAGE0_HARD_ALPA_UNKNOWN (0xFF) + +/**************************************************************************** +* RAID Volume Config Pages +****************************************************************************/ + +typedef struct _RAID_VOL0_PHYS_DISK +{ + U16 Reserved; /* 00h */ + U8 PhysDiskMap; /* 02h */ + U8 PhysDiskNum; /* 03h */ +} RAID_VOL0_PHYS_DISK, MPI_POINTER PTR_RAID_VOL0_PHYS_DISK, + RaidVol0PhysDisk_t, MPI_POINTER pRaidVol0PhysDisk_t; + +#define MPI_RAIDVOL0_PHYSDISK_PRIMARY (0x01) +#define MPI_RAIDVOL0_PHYSDISK_SECONDARY (0x02) + +typedef struct _RAID_VOL0_STATUS +{ + U8 Flags; /* 00h */ + U8 State; /* 01h */ + U16 Reserved; /* 02h */ +} RAID_VOL0_STATUS, MPI_POINTER PTR_RAID_VOL0_STATUS, + RaidVol0Status_t, MPI_POINTER pRaidVol0Status_t; + +/* RAID Volume Page 0 VolumeStatus defines */ + +#define MPI_RAIDVOL0_STATUS_FLAG_ENABLED (0x01) +#define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED (0x02) +#define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x04) +#define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x08) + +#define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL (0x00) +#define MPI_RAIDVOL0_STATUS_STATE_DEGRADED (0x01) +#define MPI_RAIDVOL0_STATUS_STATE_FAILED (0x02) + +typedef struct _RAID_VOL0_SETTINGS +{ + U16 Settings; /* 00h */ + U8 HotSparePool; /* 01h */ /* MPI_RAID_HOT_SPARE_POOL_ */ + U8 Reserved; /* 02h */ +} RAID_VOL0_SETTINGS, MPI_POINTER PTR_RAID_VOL0_SETTINGS, + RaidVol0Settings, MPI_POINTER pRaidVol0Settings; + +/* RAID Volume Page 0 VolumeSettings defines */ + +#define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE (0x0001) +#define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART (0x0002) +#define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE (0x0004) +#define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC (0x0008) +#define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0010) +#define MPI_RAIDVOL0_SETTING_USE_DEFAULTS (0x8000) + +/* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ +#define MPI_RAID_HOT_SPARE_POOL_0 (0x01) +#define MPI_RAID_HOT_SPARE_POOL_1 (0x02) +#define MPI_RAID_HOT_SPARE_POOL_2 (0x04) +#define MPI_RAID_HOT_SPARE_POOL_3 (0x08) +#define MPI_RAID_HOT_SPARE_POOL_4 (0x10) +#define MPI_RAID_HOT_SPARE_POOL_5 (0x20) +#define MPI_RAID_HOT_SPARE_POOL_6 (0x40) +#define MPI_RAID_HOT_SPARE_POOL_7 (0x80) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX +#define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) +#endif + +typedef struct _CONFIG_PAGE_RAID_VOL_0 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U8 VolumeID; /* 04h */ + U8 VolumeBus; /* 05h */ + U8 VolumeIOC; /* 06h */ + U8 VolumeType; /* 07h */ /* MPI_RAID_VOL_TYPE_ */ + RAID_VOL0_STATUS VolumeStatus; /* 08h */ + RAID_VOL0_SETTINGS VolumeSettings; /* 0Ch */ + U32 MaxLBA; /* 10h */ + U32 Reserved1; /* 14h */ + U32 StripeSize; /* 18h */ + U32 Reserved2; /* 1Ch */ + U32 Reserved3; /* 20h */ + U8 NumPhysDisks; /* 24h */ + U8 Reserved4; /* 25h */ + U16 Reserved5; /* 26h */ + RAID_VOL0_PHYS_DISK PhysDisk[MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX];/* 28h */ +} fCONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0, + RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t; + +#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x01) + + +/**************************************************************************** +* RAID Physical Disk Config Pages +****************************************************************************/ + +typedef struct _RAID_PHYS_DISK0_ERROR_DATA +{ + U8 ErrorCdbByte; /* 00h */ + U8 ErrorSenseKey; /* 01h */ + U16 Reserved; /* 02h */ + U16 ErrorCount; /* 04h */ + U8 ErrorASC; /* 06h */ + U8 ErrorASCQ; /* 07h */ + U16 SmartCount; /* 08h */ + U8 SmartASC; /* 0Ah */ + U8 SmartASCQ; /* 0Bh */ +} RAID_PHYS_DISK0_ERROR_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_ERROR_DATA, + RaidPhysDisk0ErrorData_t, MPI_POINTER pRaidPhysDisk0ErrorData_t; + +typedef struct _RAID_PHYS_DISK_INQUIRY_DATA +{ + U8 VendorID[8]; /* 00h */ + U8 ProductID[16]; /* 08h */ + U8 ProductRevLevel[4]; /* 18h */ + U8 Info[32]; /* 1Ch */ +} RAID_PHYS_DISK0_INQUIRY_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_INQUIRY_DATA, + RaidPhysDisk0InquiryData, MPI_POINTER pRaidPhysDisk0InquiryData; + +typedef struct _RAID_PHYS_DISK0_SETTINGS +{ + U8 SepID; /* 00h */ + U8 SepBus; /* 01h */ + U8 HotSparePool; /* 02h */ /* MPI_RAID_HOT_SPARE_POOL_ */ + U8 PhysDiskSettings; /* 03h */ +} RAID_PHYS_DISK0_SETTINGS, MPI_POINTER PTR_RAID_PHYS_DISK0_SETTINGS, + RaidPhysDiskSettings_t, MPI_POINTER pRaidPhysDiskSettings_t; + +typedef struct _RAID_PHYS_DISK0_STATUS +{ + U8 Flags; /* 00h */ + U8 State; /* 01h */ + U16 Reserved; /* 02h */ +} RAID_PHYS_DISK0_STATUS, MPI_POINTER PTR_RAID_PHYS_DISK0_STATUS, + RaidPhysDiskStatus_t, MPI_POINTER pRaidPhysDiskStatus_t; + +/* RAID Volume 2 IM Physical Disk DiskStatus flags */ + +#define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x01) +#define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED (0x02) + +#define MPI_PHYSDISK0_STATUS_ONLINE (0x00) +#define MPI_PHYSDISK0_STATUS_MISSING (0x01) +#define MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE (0x02) +#define MPI_PHYSDISK0_STATUS_FAILED (0x03) +#define MPI_PHYSDISK0_STATUS_INITIALIZING (0x04) +#define MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED (0x05) +#define MPI_PHYSDISK0_STATUS_FAILED_REQUESTED (0x06) +#define MPI_PHYSDISK0_STATUS_OTHER_OFFLINE (0xFF) + +typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_0 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + U8 PhysDiskID; /* 04h */ + U8 PhysDiskBus; /* 05h */ + U8 PhysDiskIOC; /* 06h */ + U8 PhysDiskNum; /* 07h */ + RAID_PHYS_DISK0_SETTINGS PhysDiskSettings; /* 08h */ + U32 Reserved1; /* 0Ch */ + U32 Reserved2; /* 10h */ + U32 Reserved3; /* 14h */ + U8 DiskIdentifier[16]; /* 18h */ + RAID_PHYS_DISK0_INQUIRY_DATA InquiryData; /* 28h */ + RAID_PHYS_DISK0_STATUS PhysDiskStatus; /* 64h */ + U32 MaxLBA; /* 68h */ + RAID_PHYS_DISK0_ERROR_DATA ErrorData; /* 6Ch */ +} fCONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0, + RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t; + +#define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION (0x00) + + +/**************************************************************************** +* LAN Config Pages +****************************************************************************/ + +typedef struct _CONFIG_PAGE_LAN_0 +{ + ConfigPageHeader_t Header; /* 00h */ + U16 TxRxModes; /* 04h */ + U16 Reserved; /* 06h */ + U32 PacketPrePad; /* 08h */ +} fCONFIG_PAGE_LAN_0, MPI_POINTER PTR_CONFIG_PAGE_LAN_0, + LANPage0_t, MPI_POINTER pLANPage0_t; + +#define MPI_LAN_PAGE0_PAGEVERSION (0x01) + +#define MPI_LAN_PAGE0_RETURN_LOOPBACK (0x0000) +#define MPI_LAN_PAGE0_SUPPRESS_LOOPBACK (0x0001) +#define MPI_LAN_PAGE0_LOOPBACK_MASK (0x0001) + +typedef struct _CONFIG_PAGE_LAN_1 +{ + ConfigPageHeader_t Header; /* 00h */ + U16 Reserved; /* 04h */ + U8 CurrentDeviceState; /* 06h */ + U8 Reserved1; /* 07h */ + U32 MinPacketSize; /* 08h */ + U32 MaxPacketSize; /* 0Ch */ + U32 HardwareAddressLow; /* 10h */ + U32 HardwareAddressHigh; /* 14h */ + U32 MaxWireSpeedLow; /* 18h */ + U32 MaxWireSpeedHigh; /* 1Ch */ + U32 BucketsRemaining; /* 20h */ + U32 MaxReplySize; /* 24h */ + U32 NegWireSpeedLow; /* 28h */ + U32 NegWireSpeedHigh; /* 2Ch */ +} fCONFIG_PAGE_LAN_1, MPI_POINTER PTR_CONFIG_PAGE_LAN_1, + LANPage1_t, MPI_POINTER pLANPage1_t; + +#define MPI_LAN_PAGE1_PAGEVERSION (0x03) + +#define MPI_LAN_PAGE1_DEV_STATE_RESET (0x00) +#define MPI_LAN_PAGE1_DEV_STATE_OPERATIONAL (0x01) + + +/**************************************************************************** +* Inband Config Pages +****************************************************************************/ + +typedef struct _CONFIG_PAGE_INBAND_0 +{ + fCONFIG_PAGE_HEADER Header; /* 00h */ + MPI_VERSION_FORMAT InbandVersion; /* 04h */ + U16 MaximumBuffers; /* 08h */ + U16 Reserved1; /* 0Ah */ +} fCONFIG_PAGE_INBAND_0, MPI_POINTER PTR_CONFIG_PAGE_INBAND_0, + InbandPage0_t, MPI_POINTER pInbandPage0_t; + +#define MPI_INBAND_PAGEVERSION (0x00) + + + +/**************************************************************************** +* SAS IO Unit Config Pages +****************************************************************************/ + +typedef struct _MPI_SAS_IO_UNIT0_PHY_DATA +{ + U8 Port; /* 00h */ + U8 PortFlags; /* 01h */ + U8 PhyFlags; /* 02h */ + U8 NegotiatedLinkRate; /* 03h */ + U32 ControllerPhyDeviceInfo;/* 04h */ + U16 AttachedDeviceHandle; /* 08h */ + U16 ControllerDevHandle; /* 0Ah */ + U32 Reserved2; /* 0Ch */ +} MPI_SAS_IO_UNIT0_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT0_PHY_DATA, + SasIOUnit0PhyData, MPI_POINTER pSasIOUnit0PhyData; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI_SAS_IOUNIT0_PHY_MAX +#define MPI_SAS_IOUNIT0_PHY_MAX (1) +#endif + +typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0 +{ + fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 08h */ + U8 NumPhys; /* 0Ch */ + U8 Reserved2; /* 0Dh */ + U16 Reserved3; /* 0Eh */ + MPI_SAS_IO_UNIT0_PHY_DATA PhyData[MPI_SAS_IOUNIT0_PHY_MAX]; /* 10h */ +} fCONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0, + SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t; + +#define MPI_SASIOUNITPAGE0_PAGEVERSION (0x00) + +/* values for SAS IO Unit Page 0 PortFlags */ +#define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS (0x08) +#define MPI_SAS_IOUNIT0_PORT_FLAGS_0_TARGET_IOC_NUM (0x00) +#define MPI_SAS_IOUNIT0_PORT_FLAGS_1_TARGET_IOC_NUM (0x04) +#define MPI_SAS_IOUNIT0_PORT_FLAGS_WAIT_FOR_PORTENABLE (0x02) +#define MPI_SAS_IOUNIT0_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) + +/* values for SAS IO Unit Page 0 PhyFlags */ +#define MPI_SAS_IOUNIT0_PHY_FLAGS_PHY_DISABLED (0x04) +#define MPI_SAS_IOUNIT0_PHY_FLAGS_TX_INVERT (0x02) +#define MPI_SAS_IOUNIT0_PHY_FLAGS_RX_INVERT (0x01) + +/* values for SAS IO Unit Page 0 NegotiatedLinkRate */ +#define MPI_SAS_IOUNIT0_RATE_UNKNOWN (0x00) +#define MPI_SAS_IOUNIT0_RATE_PHY_DISABLED (0x01) +#define MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION (0x02) +#define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE (0x03) +#define MPI_SAS_IOUNIT0_RATE_1_5 (0x08) +#define MPI_SAS_IOUNIT0_RATE_3_0 (0x09) + +/* see mpi_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */ + + +typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA +{ + U8 Port; /* 00h */ + U8 PortFlags; /* 01h */ + U8 PhyFlags; /* 02h */ + U8 MaxMinLinkRate; /* 03h */ + U32 ControllerPhyDeviceInfo;/* 04h */ + U32 Reserved1; /* 08h */ +} MPI_SAS_IO_UNIT1_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT1_PHY_DATA, + SasIOUnit1PhyData, MPI_POINTER pSasIOUnit1PhyData; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI_SAS_IOUNIT1_PHY_MAX +#define MPI_SAS_IOUNIT1_PHY_MAX (1) +#endif + +typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1 +{ + fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 08h */ + U8 NumPhys; /* 0Ch */ + U8 Reserved2; /* 0Dh */ + U16 Reserved3; /* 0Eh */ + MPI_SAS_IO_UNIT1_PHY_DATA PhyData[MPI_SAS_IOUNIT1_PHY_MAX]; /* 10h */ +} fCONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1, + SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t; + +#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x00) + +/* values for SAS IO Unit Page 0 PortFlags */ +#define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00) +#define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04) +#define MPI_SAS_IOUNIT1_PORT_FLAGS_WAIT_FOR_PORTENABLE (0x02) +#define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) + +/* values for SAS IO Unit Page 0 PhyFlags */ +#define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE (0x04) +#define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT (0x02) +#define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT (0x01) + +/* values for SAS IO Unit Page 0 MaxMinLinkRate */ +#define MPI_SAS_IOUNIT1_MAX_RATE_MASK (0xF0) +#define MPI_SAS_IOUNIT1_MAX_RATE_1_5 (0x80) +#define MPI_SAS_IOUNIT1_MAX_RATE_3_0 (0x90) +#define MPI_SAS_IOUNIT1_MIN_RATE_MASK (0x0F) +#define MPI_SAS_IOUNIT1_MIN_RATE_1_5 (0x08) +#define MPI_SAS_IOUNIT1_MIN_RATE_3_0 (0x09) + +/* see mpi_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ + + +typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2 +{ + fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 08h */ + U16 MaxPersistentIDs; /* 0Ch */ + U16 NumPersistentIDsUsed; /* 0Eh */ + U8 Status; /* 10h */ + U8 Flags; /* 11h */ + U16 Reserved2; /* 12h */ +} fCONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2, + SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t; + +#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x00) + +/* values for SAS IO Unit Page 2 Status field */ +#define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02) +#define MPI_SAS_IOUNIT2_STATUS_FULL_PERSISTENT_MAPPINGS (0x01) + +/* values for SAS IO Unit Page 2 Flags field */ +#define MPI_SAS_IOUNIT2_FLAGS_DISABLE_PERSISTENT_MAPPINGS (0x01) + + +typedef struct _CONFIG_PAGE_SAS_IO_UNIT_3 +{ + fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 08h */ + U32 MaxInvalidDwordCount; /* 0Ch */ + U32 InvalidDwordCountTime; /* 10h */ + U32 MaxRunningDisparityErrorCount; /* 14h */ + U32 RunningDisparityErrorTime; /* 18h */ + U32 MaxLossDwordSynchCount; /* 1Ch */ + U32 LossDwordSynchCountTime; /* 20h */ + U32 MaxPhyResetProblemCount; /* 24h */ + U32 PhyResetProblemTime; /* 28h */ +} fCONFIG_PAGE_SAS_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_3, + SasIOUnitPage3_t, MPI_POINTER pSasIOUnitPage3_t; + +#define MPI_SASIOUNITPAGE3_PAGEVERSION (0x00) + + +typedef struct _CONFIG_PAGE_SAS_EXPANDER_0 +{ + fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 08h */ + U64 SASAddress; /* 0Ch */ + U32 Reserved2; /* 14h */ + U16 DevHandle; /* 18h */ + U16 ParentDevHandle; /* 1Ah */ + U16 ExpanderChangeCount; /* 1Ch */ + U16 ExpanderRouteIndexes; /* 1Eh */ + U8 NumPhys; /* 20h */ + U8 SASLevel; /* 21h */ + U8 Flags; /* 22h */ + U8 Reserved3; /* 23h */ +} fCONFIG_PAGE_SAS_EXPANDER_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_0, + SasExpanderPage0_t, MPI_POINTER pSasExpanderPage0_t; + +#define MPI_SASEXPANDER0_PAGEVERSION (0x00) + +/* values for SAS Expander Page 0 Flags field */ +#define MPI_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x02) +#define MPI_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x01) + + +typedef struct _CONFIG_PAGE_SAS_DEVICE_0 +{ + fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 08h */ + U64 SASAddress; /* 0Ch */ + U32 Reserved2; /* 14h */ + U16 DevHandle; /* 18h */ + U8 TargetID; /* 1Ah */ + U8 Bus; /* 1Bh */ + U32 DeviceInfo; /* 1Ch */ + U16 Flags; /* 20h */ + U8 PhysicalPort; /* 22h */ + U8 Reserved3; /* 23h */ +} fCONFIG_PAGE_SAS_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_0, + SasDevicePage0_t, MPI_POINTER pSasDevicePage0_t; + +#define MPI_SASDEVICE0_PAGEVERSION (0x00) + +/* values for SAS Device Page 0 Flags field */ +#define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT (0x04) +#define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED (0x02) +#define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x01) + +/* see mpi_sas.h for values for SAS Device Page 0 DeviceInfo values */ + + +typedef struct _CONFIG_PAGE_SAS_DEVICE_1 +{ + fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 08h */ + U64 SASAddress; /* 0Ch */ + U32 Reserved2; /* 14h */ + U16 DevHandle; /* 18h */ + U8 TargetID; /* 1Ah */ + U8 Bus; /* 1Bh */ + U8 InitialRegDeviceFIS[20];/* 1Ch */ +} fCONFIG_PAGE_SAS_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_1, + SasDevicePage1_t, MPI_POINTER pSasDevicePage1_t; + +#define MPI_SASDEVICE1_PAGEVERSION (0x00) + + +typedef struct _CONFIG_PAGE_SAS_PHY_0 +{ + fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 08h */ + U64 SASAddress; /* 0Ch */ + U16 AttachedDevHandle; /* 14h */ + U8 AttachedPhyIdentifier; /* 16h */ + U8 Reserved2; /* 17h */ + U32 AttachedDeviceInfo; /* 18h */ + U8 ProgrammedLinkRate; /* 20h */ + U8 HwLinkRate; /* 21h */ + U8 ChangeCount; /* 22h */ + U8 Reserved3; /* 23h */ + U32 PhyInfo; /* 24h */ +} fCONFIG_PAGE_SAS_PHY_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_0, + SasPhyPage0_t, MPI_POINTER pSasPhyPage0_t; + +#define MPI_SASPHY0_PAGEVERSION (0x00) + +/* values for SAS PHY Page 0 ProgrammedLinkRate field */ +#define MPI_SAS_PHY0_PRATE_MAX_RATE_MASK (0xF0) +#define MPI_SAS_PHY0_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) +#define MPI_SAS_PHY0_PRATE_MAX_RATE_1_5 (0x80) +#define MPI_SAS_PHY0_PRATE_MAX_RATE_3_0 (0x90) +#define MPI_SAS_PHY0_PRATE_MIN_RATE_MASK (0x0F) +#define MPI_SAS_PHY0_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) +#define MPI_SAS_PHY0_PRATE_MIN_RATE_1_5 (0x08) +#define MPI_SAS_PHY0_PRATE_MIN_RATE_3_0 (0x09) + +/* values for SAS PHY Page 0 HwLinkRate field */ +#define MPI_SAS_PHY0_HWRATE_MAX_RATE_MASK (0xF0) +#define MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5 (0x80) +#define MPI_SAS_PHY0_HWRATE_MAX_RATE_3_0 (0x90) +#define MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK (0x0F) +#define MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5 (0x08) +#define MPI_SAS_PHY0_HWRATE_MIN_RATE_3_0 (0x09) + +/* values for SAS PHY Page 0 PhyInfo field */ +#define MPI_SAS_PHY0_PHYINFO_SATA_PORT_ACTIVE (0x00004000) +#define MPI_SAS_PHY0_PHYINFO_SATA_PORT_SELECTOR (0x00002000) +#define MPI_SAS_PHY0_PHYINFO_VIRTUAL_PHY (0x00001000) + +#define MPI_SAS_PHY0_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00) +#define MPI_SAS_PHY0_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8) + +#define MPI_SAS_PHY0_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0) +#define MPI_SAS_PHY0_PHYINFO_DIRECT_ROUTING (0x00000000) +#define MPI_SAS_PHY0_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010) +#define MPI_SAS_PHY0_PHYINFO_TABLE_ROUTING (0x00000020) + +#define MPI_SAS_PHY0_PHYINFO_MASK_LINK_RATE (0x0000000F) +#define MPI_SAS_PHY0_PHYINFO_UNKNOWN_LINK_RATE (0x00000000) +#define MPI_SAS_PHY0_PHYINFO_PHY_DISABLED (0x00000001) +#define MPI_SAS_PHY0_PHYINFO_NEGOTIATION_FAILED (0x00000002) +#define MPI_SAS_PHY0_PHYINFO_SATA_OOB_COMPLETE (0x00000003) +#define MPI_SAS_PHY0_PHYINFO_RATE_1_5 (0x00000008) +#define MPI_SAS_PHY0_PHYINFO_RATE_3_0 (0x00000009) + + +typedef struct _CONFIG_PAGE_SAS_PHY_1 +{ + fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 08h */ + U32 InvalidDwordCount; /* 0Ch */ + U32 RunningDisparityErrorCount; /* 10h */ + U32 LossDwordSynchCount; /* 14h */ + U32 PhyResetProblemCount; /* 18h */ +} fCONFIG_PAGE_SAS_PHY_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_1, + SasPhyPage1_t, MPI_POINTER pSasPhyPage1_t; + +#define MPI_SASPHY1_PAGEVERSION (0x00) + + +#endif + diff --git a/drivers/message/fusion/lsi/mpi_fc.h b/drivers/message/fusion/lsi/mpi_fc.h new file mode 100644 index 000000000000..ea266b236c1f --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_fc.h @@ -0,0 +1,363 @@ +/* + * Copyright (c) 2000-2003 LSI Logic Corporation. + * + * + * Name: mpi_fc.h + * Title: MPI Fibre Channel messages and structures + * Creation Date: June 12, 2000 + * + * mpi_fc.h Version: 01.05.xx + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 06-06-00 01.00.01 Update version number for 1.0 release. + * 06-12-00 01.00.02 Added _MSG_FC_ABORT_REPLY structure. + * 11-02-00 01.01.01 Original release for post 1.0 work + * 12-04-00 01.01.02 Added messages for Common Transport Send and + * Primitive Send. + * 01-09-01 01.01.03 Modifed some of the new flags to have an MPI prefix + * and modified the FcPrimitiveSend flags. + * 01-25-01 01.01.04 Move InitiatorIndex in LinkServiceRsp reply to a larger + * field. + * Added FC_ABORT_TYPE_CT_SEND_REQUEST and + * FC_ABORT_TYPE_EXLINKSEND_REQUEST for FcAbort request. + * Added MPI_FC_PRIM_SEND_FLAGS_STOP_SEND. + * 02-20-01 01.01.05 Started using MPI_POINTER. + * 03-27-01 01.01.06 Added Flags field to MSG_LINK_SERVICE_BUFFER_POST_REPLY + * and defined MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED. + * Added MPI_FC_PRIM_SEND_FLAGS_RESET_LINK define. + * Added structure offset comments. + * 04-09-01 01.01.07 Added RspLength field to MSG_LINK_SERVICE_RSP_REQUEST. + * 08-08-01 01.02.01 Original release for v1.2 work. + * 09-28-01 01.02.02 Change name of reserved field in + * MSG_LINK_SERVICE_RSP_REPLY. + * 05-31-02 01.02.03 Adding AliasIndex to FC Direct Access requests. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_FC_H +#define MPI_FC_H + + +/***************************************************************************** +* +* F C D i r e c t A c c e s s M e s s a g e s +* +*****************************************************************************/ + +/****************************************************************************/ +/* Link Service Buffer Post messages */ +/****************************************************************************/ + +typedef struct _MSG_LINK_SERVICE_BUFFER_POST_REQUEST +{ + U8 BufferPostFlags; /* 00h */ + U8 BufferCount; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved; /* 04h */ + U8 Reserved1; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + SGE_TRANS_SIMPLE_UNION SGL; +} MSG_LINK_SERVICE_BUFFER_POST_REQUEST, + MPI_POINTER PTR_MSG_LINK_SERVICE_BUFFER_POST_REQUEST, + LinkServiceBufferPostRequest_t, MPI_POINTER pLinkServiceBufferPostRequest_t; + +#define LINK_SERVICE_BUFFER_POST_FLAGS_PORT_MASK (0x01) + +typedef struct _WWNFORMAT +{ + U32 PortNameHigh; /* 00h */ + U32 PortNameLow; /* 04h */ + U32 NodeNameHigh; /* 08h */ + U32 NodeNameLow; /* 0Ch */ +} WWNFORMAT, + WwnFormat_t; + +/* Link Service Buffer Post Reply */ +typedef struct _MSG_LINK_SERVICE_BUFFER_POST_REPLY +{ + U8 Flags; /* 00h */ + U8 Reserved; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 PortNumber; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved2; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 TransferLength; /* 14h */ + U32 TransactionContext; /* 18h */ + U32 Rctl_Did; /* 1Ch */ + U32 Csctl_Sid; /* 20h */ + U32 Type_Fctl; /* 24h */ + U16 SeqCnt; /* 28h */ + U8 Dfctl; /* 2Ah */ + U8 SeqId; /* 2Bh */ + U16 Rxid; /* 2Ch */ + U16 Oxid; /* 2Eh */ + U32 Parameter; /* 30h */ + WWNFORMAT Wwn; /* 34h */ +} MSG_LINK_SERVICE_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY, + LinkServiceBufferPostReply_t, MPI_POINTER pLinkServiceBufferPostReply_t; + +#define MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED (0x80) + +#define MPI_FC_DID_MASK (0x00FFFFFF) +#define MPI_FC_DID_SHIFT (0) +#define MPI_FC_RCTL_MASK (0xFF000000) +#define MPI_FC_RCTL_SHIFT (24) +#define MPI_FC_SID_MASK (0x00FFFFFF) +#define MPI_FC_SID_SHIFT (0) +#define MPI_FC_CSCTL_MASK (0xFF000000) +#define MPI_FC_CSCTL_SHIFT (24) +#define MPI_FC_FCTL_MASK (0x00FFFFFF) +#define MPI_FC_FCTL_SHIFT (0) +#define MPI_FC_TYPE_MASK (0xFF000000) +#define MPI_FC_TYPE_SHIFT (24) + +/* obsolete name for the above */ +#define FCP_TARGET_DID_MASK (0x00FFFFFF) +#define FCP_TARGET_DID_SHIFT (0) +#define FCP_TARGET_RCTL_MASK (0xFF000000) +#define FCP_TARGET_RCTL_SHIFT (24) +#define FCP_TARGET_SID_MASK (0x00FFFFFF) +#define FCP_TARGET_SID_SHIFT (0) +#define FCP_TARGET_CSCTL_MASK (0xFF000000) +#define FCP_TARGET_CSCTL_SHIFT (24) +#define FCP_TARGET_FCTL_MASK (0x00FFFFFF) +#define FCP_TARGET_FCTL_SHIFT (0) +#define FCP_TARGET_TYPE_MASK (0xFF000000) +#define FCP_TARGET_TYPE_SHIFT (24) + + +/****************************************************************************/ +/* Link Service Response messages */ +/****************************************************************************/ + +typedef struct _MSG_LINK_SERVICE_RSP_REQUEST +{ + U8 RspFlags; /* 00h */ + U8 RspLength; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Rctl_Did; /* 0Ch */ + U32 Csctl_Sid; /* 10h */ + U32 Type_Fctl; /* 14h */ + U16 SeqCnt; /* 18h */ + U8 Dfctl; /* 1Ah */ + U8 SeqId; /* 1Bh */ + U16 Rxid; /* 1Ch */ + U16 Oxid; /* 1Eh */ + U32 Parameter; /* 20h */ + SGE_SIMPLE_UNION SGL; /* 24h */ +} MSG_LINK_SERVICE_RSP_REQUEST, MPI_POINTER PTR_MSG_LINK_SERVICE_RSP_REQUEST, + LinkServiceRspRequest_t, MPI_POINTER pLinkServiceRspRequest_t; + +#define LINK_SERVICE_RSP_FLAGS_IMMEDIATE (0x80) +#define LINK_SERVICE_RSP_FLAGS_PORT_MASK (0x01) + + +/* Link Service Response Reply */ +typedef struct _MSG_LINK_SERVICE_RSP_REPLY +{ + U16 Reserved; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved_0100_InitiatorIndex; /* 06h */ /* obsolete InitiatorIndex */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved3; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 InitiatorIndex; /* 14h */ +} MSG_LINK_SERVICE_RSP_REPLY, MPI_POINTER PTR_MSG_LINK_SERVICE_RSP_REPLY, + LinkServiceRspReply_t, MPI_POINTER pLinkServiceRspReply_t; + + +/****************************************************************************/ +/* Extended Link Service Send messages */ +/****************************************************************************/ + +typedef struct _MSG_EXLINK_SERVICE_SEND_REQUEST +{ + U8 SendFlags; /* 00h */ + U8 AliasIndex; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U32 MsgFlags_Did; /* 04h */ + U32 MsgContext; /* 08h */ + U32 ElsCommandCode; /* 0Ch */ + SGE_SIMPLE_UNION SGL; /* 10h */ +} MSG_EXLINK_SERVICE_SEND_REQUEST, MPI_POINTER PTR_MSG_EXLINK_SERVICE_SEND_REQUEST, + ExLinkServiceSendRequest_t, MPI_POINTER pExLinkServiceSendRequest_t; + +#define EX_LINK_SERVICE_SEND_DID_MASK (0x00FFFFFF) +#define EX_LINK_SERVICE_SEND_DID_SHIFT (0) +#define EX_LINK_SERVICE_SEND_MSGFLAGS_MASK (0xFF000000) +#define EX_LINK_SERVICE_SEND_MSGFLAGS_SHIFT (24) + + +/* Extended Link Service Send Reply */ +typedef struct _MSG_EXLINK_SERVICE_SEND_REPLY +{ + U8 Reserved; /* 00h */ + U8 AliasIndex; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved3; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 ResponseLength; /* 14h */ +} MSG_EXLINK_SERVICE_SEND_REPLY, MPI_POINTER PTR_MSG_EXLINK_SERVICE_SEND_REPLY, + ExLinkServiceSendReply_t, MPI_POINTER pExLinkServiceSendReply_t; + +/****************************************************************************/ +/* FC Abort messages */ +/****************************************************************************/ + +typedef struct _MSG_FC_ABORT_REQUEST +{ + U8 AbortFlags; /* 00h */ + U8 AbortType; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 TransactionContextToAbort; /* 0Ch */ +} MSG_FC_ABORT_REQUEST, MPI_POINTER PTR_MSG_FC_ABORT_REQUEST, + FcAbortRequest_t, MPI_POINTER pFcAbortRequest_t; + +#define FC_ABORT_FLAG_PORT_MASK (0x01) + +#define FC_ABORT_TYPE_ALL_FC_BUFFERS (0x00) +#define FC_ABORT_TYPE_EXACT_FC_BUFFER (0x01) +#define FC_ABORT_TYPE_CT_SEND_REQUEST (0x02) +#define FC_ABORT_TYPE_EXLINKSEND_REQUEST (0x03) + +/* FC Abort Reply */ +typedef struct _MSG_FC_ABORT_REPLY +{ + U16 Reserved; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved3; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_FC_ABORT_REPLY, MPI_POINTER PTR_MSG_FC_ABORT_REPLY, + FcAbortReply_t, MPI_POINTER pFcAbortReply_t; + + +/****************************************************************************/ +/* FC Common Transport Send messages */ +/****************************************************************************/ + +typedef struct _MSG_FC_COMMON_TRANSPORT_SEND_REQUEST +{ + U8 SendFlags; /* 00h */ + U8 AliasIndex; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U32 MsgFlags_Did; /* 04h */ + U32 MsgContext; /* 08h */ + U16 CTCommandCode; /* 0Ch */ + U8 FsType; /* 0Eh */ + U8 Reserved1; /* 0Fh */ + SGE_SIMPLE_UNION SGL; /* 10h */ +} MSG_FC_COMMON_TRANSPORT_SEND_REQUEST, + MPI_POINTER PTR_MSG_FC_COMMON_TRANSPORT_SEND_REQUEST, + FcCommonTransportSendRequest_t, MPI_POINTER pFcCommonTransportSendRequest_t; + +#define MPI_FC_CT_SEND_DID_MASK (0x00FFFFFF) +#define MPI_FC_CT_SEND_DID_SHIFT (0) +#define MPI_FC_CT_SEND_MSGFLAGS_MASK (0xFF000000) +#define MPI_FC_CT_SEND_MSGFLAGS_SHIFT (24) + + +/* FC Common Transport Send Reply */ +typedef struct _MSG_FC_COMMON_TRANSPORT_SEND_REPLY +{ + U8 Reserved; /* 00h */ + U8 AliasIndex; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved3; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 ResponseLength; /* 14h */ +} MSG_FC_COMMON_TRANSPORT_SEND_REPLY, MPI_POINTER PTR_MSG_FC_COMMON_TRANSPORT_SEND_REPLY, + FcCommonTransportSendReply_t, MPI_POINTER pFcCommonTransportSendReply_t; + + +/****************************************************************************/ +/* FC Primitive Send messages */ +/****************************************************************************/ + +typedef struct _MSG_FC_PRIMITIVE_SEND_REQUEST +{ + U8 SendFlags; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 FcPrimitive[4]; /* 0Ch */ +} MSG_FC_PRIMITIVE_SEND_REQUEST, MPI_POINTER PTR_MSG_FC_PRIMITIVE_SEND_REQUEST, + FcPrimitiveSendRequest_t, MPI_POINTER pFcPrimitiveSendRequest_t; + +#define MPI_FC_PRIM_SEND_FLAGS_PORT_MASK (0x01) +#define MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK (0x02) +#define MPI_FC_PRIM_SEND_FLAGS_RESET_LINK (0x04) +#define MPI_FC_PRIM_SEND_FLAGS_STOP_SEND (0x08) +#define MPI_FC_PRIM_SEND_FLAGS_SEND_ONCE (0x10) +#define MPI_FC_PRIM_SEND_FLAGS_SEND_AROUND (0x20) +#define MPI_FC_PRIM_SEND_FLAGS_UNTIL_FULL (0x40) +#define MPI_FC_PRIM_SEND_FLAGS_FOREVER (0x80) + +/* FC Primitive Send Reply */ +typedef struct _MSG_FC_PRIMITIVE_SEND_REPLY +{ + U8 SendFlags; /* 00h */ + U8 Reserved; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved3; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_FC_PRIMITIVE_SEND_REPLY, MPI_POINTER PTR_MSG_FC_PRIMITIVE_SEND_REPLY, + FcPrimitiveSendReply_t, MPI_POINTER pFcPrimitiveSendReply_t; + +#endif + diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt new file mode 100644 index 000000000000..0deb7721e936 --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_history.txt @@ -0,0 +1,276 @@ + + ============================== + MPI Header File Change History + ============================== + + Copyright (c) 2000-2001 LSI Logic Corporation. + + --------------------------------------- + Header Set Release Version: 01.01.10 + Header Set Release Date: 04-09-01 + --------------------------------------- + + Filename Current version Prior version + ---------- --------------- ------------- + mpi.h 01.01.07 01.01.06 + mpi_ioc.h 01.01.07 01.01.06 + mpi_cnfg.h 01.01.11 01.01.10 + mpi_init.h 01.01.05 01.01.04 + mpi_targ.h 01.01.04 01.01.04 + mpi_fc.h 01.01.07 01.01.06 + mpi_lan.h 01.01.03 01.01.03 + mpi_raid.h 01.01.02 01.01.02 + mpi_type.h 01.01.02 01.01.02 + mpi_history.txt 01.01.09 01.01.09 + + + * Date Version Description + * -------- -------- ------------------------------------------------------ + +mpi.h + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 05-24-00 00.10.02 Added MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH definition. + * 06-06-00 01.00.01 Update MPI_VERSION_MAJOR and MPI_VERSION_MINOR. + * 06-22-00 01.00.02 Added MPI_IOCSTATUS_LAN_ definitions. + * Removed LAN_SUSPEND function definition. + * Added MPI_MSGFLAGS_CONTINUATION_REPLY definition. + * 06-30-00 01.00.03 Added MPI_CONTEXT_REPLY_TYPE_LAN definition. + * Added MPI_GET/SET_CONTEXT_REPLY_TYPE macros. + * 07-27-00 01.00.04 Added MPI_FAULT_ definitions. + * Removed MPI_IOCSTATUS_MSG/DATA_XFER_ERROR definitions. + * Added MPI_IOCSTATUS_INTERNAL_ERROR definition. + * Added MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH. + * 11-02-00 01.01.01 Original release for post 1.0 work + * 12-04-00 01.01.02 Added new function codes. + * 01-09-01 01.01.03 Added more definitions to the system interface section + * Added MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT. + * 01-25-01 01.01.04 Changed MPI_VERSION_MINOR from 0x00 to 0x01. + * 02-20-01 01.01.05 Started using MPI_POINTER. + * Added defines for MPI_DIAG_PREVENT_IOC_BOOT and + * MPI_DIAG_CLEAR_FLASH_BAD_SIG. + * Obsoleted MPI_IOCSTATUS_TARGET_FC_ defines. + * 02-27-01 01.01.06 Removed MPI_HOST_INDEX_REGISTER define. + * Added function codes for RAID. + * 04-09-01 01.01.07 Added alternate define for MPI_DOORBELL_ACTIVE, + * MPI_DOORBELL_USED, to better match the spec. + * -------------------------------------------------------------------------- + +mpi_ioc.h + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 05-24-00 00.10.02 Added _MSG_IOC_INIT_REPLY structure. + * 06-06-00 01.00.01 Added CurReplyFrameSize field to _MSG_IOC_FACTS_REPLY. + * 06-12-00 01.00.02 Added _MSG_PORT_ENABLE_REPLY structure. + * Added _MSG_EVENT_ACK_REPLY structure. + * Added _MSG_FW_DOWNLOAD_REPLY structure. + * Added _MSG_TOOLBOX_REPLY structure. + * 06-30-00 01.00.03 Added MaxLanBuckets to _PORT_FACT_REPLY structure. + * 07-27-00 01.00.04 Added _EVENT_DATA structure definitions for _SCSI, + * _LINK_STATUS, _LOOP_STATE and _LOGOUT. + * 08-11-00 01.00.05 Switched positions of MsgLength and Function fields in + * _MSG_EVENT_ACK_REPLY structure to match specification. + * 11-02-00 01.01.01 Original release for post 1.0 work + * Added a value for Manufacturer to WhoInit + * 12-04-00 01.01.02 Modified IOCFacts reply, added FWUpload messages, and + * removed toolbox message. + * 01-09-01 01.01.03 Added event enabled and disabled defines. + * Added structures for FwHeader and DataHeader. + * Added ImageType to FwUpload reply. + * 02-20-01 01.01.04 Started using MPI_POINTER. + * 02-27-01 01.01.05 Added event for RAID status change and its event data. + * Added IocNumber field to MSG_IOC_FACTS_REPLY. + * 03-27-01 01.01.06 Added defines for ProductId field of MPI_FW_HEADER. + * Added structure offset comments. + * 04-09-01 01.01.07 Added structure EVENT_DATA_EVENT_CHANGE. + * -------------------------------------------------------------------------- + +mpi_cnfg.h + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 06-06-00 01.00.01 Update version number for 1.0 release. + * 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages. + * Added FcPhLowestVersion, FcPhHighestVersion, Reserved2 + * fields to FC_DEVICE_0 page, updated the page version. + * Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in + * SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages + * and updated the page versions. + * Added _RESPONSE_ID_MASK definition to SCSI_PORT_1 + * page and updated the page version. + * Added Information field and _INFO_PARAMS_NEGOTIATED + * definitionto SCSI_DEVICE_0 page. + * 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the + * page version. + * Added BucketsRemaining to LAN_1 page, redefined the + * state values, and updated the page version. + * Revised bus width definitions in SCSI_PORT_0, + * SCSI_DEVICE_0 and SCSI_DEVICE_1 pages. + * 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page + * version. + * Moved FC_DEVICE_0 PageAddress description to spec. + * 07-27-00 01.00.05 Corrected the SubsystemVendorID and SubsystemID field + * widths in IOC_0 page and updated the page version. + * 11-02-00 01.01.01 Original release for post 1.0 work + * Added Manufacturing pages, IO Unit Page 2, SCSI SPI + * Port Page 2, FC Port Page 4, FC Port Page 5 + * 12-04-00 01.01.03 Config page changes to match MPI rev 1.00.01. + * 12-05-00 01.01.04 Modified config page actions. + * 01-09-01 01.01.05 Added defines for page address formats. + * Data size for Manufacturing pages 2 and 3 no longer + * defined here. + * Io Unit Page 2 size is fixed at 4 adapters and some + * flags were changed. + * SCSI Port Page 2 Device Settings modified. + * New fields added to FC Port Page 0 and some flags + * cleaned up. + * Removed impedance flash from FC Port Page 1. + * Added FC Port pages 6 and 7. + * 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0. + * 01-29-01 01.01.07 Changed some defines to make them 32 character unique. + * Added some LinkType defines for FcPortPage0. + * 02-20-01 01.01.08 Started using MPI_POINTER. + * 02-27-01 01.01.09 Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with + * MPI_CONFIG_PAGETYPE_RAID_VOLUME. + * Added definitions and structures for IOC Page 2 and + * RAID Volume Page 2. + * 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9. + * CONFIG_PAGE_FC_PORT_3 now supports persistent by DID. + * Added VendorId and ProductRevLevel fields to + * RAIDVOL2_IM_PHYS_ID struct. + * Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_ + * defines to make them compatible to MPI version 1.0. + * Added structure offset comments. + * 04-09-01 01.01.11 Added some new defines for the PageAddress field and + * removed some obsolete ones. + * Added IO Unit Page 3. + * Modified defines for Scsi Port Page 2. + * Modified RAID Volume Pages. + * -------------------------------------------------------------------------- + +mpi_init.h + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 05-24-00 00.10.02 Added SenseBufferLength to _MSG_SCSI_IO_REPLY. + * 06-06-00 01.00.01 Update version number for 1.0 release. + * 06-08-00 01.00.02 Added MPI_SCSI_RSP_INFO_ definitions. + * 11-02-00 01.01.01 Original release for post 1.0 work + * 12-04-00 01.01.02 Added MPI_SCSIIO_CONTROL_NO_DISCONNECT. + * 02-20-01 01.01.03 Started using MPI_POINTER. + * 03-27-01 01.01.04 Added structure offset comments. + * 04-10-01 01.01.05 Added new MsgFlag for MSG_SCSI_TASK_MGMT. + * -------------------------------------------------------------------------- + +mpi_targ.h + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 06-06-00 01.00.01 Update version number for 1.0 release. + * 06-22-00 01.00.02 Added _MSG_TARGET_CMD_BUFFER_POST_REPLY structure. + * Corrected DECSRIPTOR typo to DESCRIPTOR. + * 11-02-00 01.01.01 Original release for post 1.0 work + * Modified target mode to use IoIndex instead of + * HostIndex and IocIndex. Added Alias. + * 01-09-01 01.01.02 Added defines for TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER + * and TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER. + * 02-20-01 01.01.03 Started using MPI_POINTER. + * Added structures for MPI_TARGET_SCSI_SPI_CMD_BUFFER and + * MPI_TARGET_FCP_CMD_BUFFER. + * 03-27-01 01.01.04 Added structure offset comments. + * -------------------------------------------------------------------------- + +mpi_fc.h + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 06-06-00 01.00.01 Update version number for 1.0 release. + * 06-12-00 01.00.02 Added _MSG_FC_ABORT_REPLY structure. + * 11-02-00 01.01.01 Original release for post 1.0 work + * 12-04-00 01.01.02 Added messages for Common Transport Send and + * Primitive Send. + * 01-09-01 01.01.03 Modifed some of the new flags to have an MPI prefix + * and modified the FcPrimitiveSend flags. + * 01-25-01 01.01.04 Move InitiatorIndex in LinkServiceRsp reply to a larger + * field. + * Added FC_ABORT_TYPE_CT_SEND_REQUEST and + * FC_ABORT_TYPE_EXLINKSEND_REQUEST for FcAbort request. + * Added MPI_FC_PRIM_SEND_FLAGS_STOP_SEND. + * 02-20-01 01.01.05 Started using MPI_POINTER. + * 03-27-01 01.01.06 Added Flags field to MSG_LINK_SERVICE_BUFFER_POST_REPLY + * and defined MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED. + * Added MPI_FC_PRIM_SEND_FLAGS_RESET_LINK define. + * Added structure offset comments. + * 04-09-01 01.01.07 Added RspLength field to MSG_LINK_SERVICE_RSP_REQUEST. + * -------------------------------------------------------------------------- + +mpi_lan.h + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 05-24-00 00.10.02 Added LANStatus field to _MSG_LAN_SEND_REPLY. + * Added LANStatus field to _MSG_LAN_RECEIVE_POST_REPLY. + * Moved ListCount field in _MSG_LAN_RECEIVE_POST_REPLY. + * 06-06-00 01.00.01 Update version number for 1.0 release. + * 06-12-00 01.00.02 Added MPI_ to BUCKETSTATUS_ definitions. + * 06-22-00 01.00.03 Major changes to match new LAN definition in 1.0 spec. + * 06-30-00 01.00.04 Added Context Reply definitions per revised proposal. + * Changed transaction context usage to bucket/buffer. + * 07-05-00 01.00.05 Removed LAN_RECEIVE_POST_BUCKET_CONTEXT_MASK definition + * to lan private header file + * 11-02-00 01.01.01 Original release for post 1.0 work + * 02-20-01 01.01.02 Started using MPI_POINTER. + * 03-27-01 01.01.03 Added structure offset comments. + * -------------------------------------------------------------------------- + +mpi_raid.h + * 02-27-01 01.01.01 Original release for this file. + * 03-27-01 01.01.02 Added structure offset comments. + * -------------------------------------------------------------------------- + +mpi_type.h + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 06-06-00 01.00.01 Update version number for 1.0 release. + * 11-02-00 01.01.01 Original release for post 1.0 work + * 02-20-01 01.01.02 Added define and ifdef for MPI_POINTER. + * -------------------------------------------------------------------------- + +mpi_history.txt Parts list history + +Filename 01.01.10 +---------- -------- +mpi.h 01.01.07 +mpi_ioc.h 01.01.07 +mpi_cnfg.h 01.01.11 +mpi_init.h 01.01.05 +mpi_targ.h 01.01.04 +mpi_fc.h 01.01.07 +mpi_lan.h 01.01.03 +mpi_raid.h 01.01.02 +mpi_type.h 01.01.02 + +Filename 01.01.09 01.01.08 01.01.07 01.01.06 01.01.05 01.01.04 +---------- -------- -------- -------- -------- -------- -------- +mpi.h 01.01.06 01.01.06 01.01.05 01.01.04 01.01.04 01.01.03 +mpi_ioc.h 01.01.06 01.01.05 01.01.04 01.01.03 01.01.03 01.01.03 +mpi_cnfg.h 01.01.10 01.01.09 01.01.08 01.01.07 01.01.06 01.01.05 +mpi_init.h 01.01.04 01.01.03 01.01.03 01.01.02 01.01.02 01.01.02 +mpi_targ.h 01.01.04 01.01.03 01.01.03 01.01.02 01.01.02 01.01.02 +mpi_fc.h 01.01.06 01.01.05 01.01.05 01.01.04 01.01.04 01.01.03 +mpi_lan.h 01.01.03 01.01.02 01.01.02 01.01.01 01.01.01 01.01.01 +mpi_raid.h 01.01.02 01.01.01 +mpi_type.h 01.01.02 01.01.02 01.01.02 01.01.01 01.01.01 01.01.01 + +Filename 01.01.03 01.01.02 01.01.01 01.00.07 01.00.06 01.00.05 +---------- -------- -------- -------- -------- -------- -------- +mpi.h 01.01.02 01.01.02 01.01.01 01.00.04 01.00.04 01.00.03 +mpi_ioc.h 01.01.02 01.01.02 01.01.01 01.00.05 01.00.04 01.00.03 +mpi_cnfg.h 01.01.04 01.01.03 01.01.01 01.00.05 01.00.05 01.00.04 +mpi_init.h 01.01.02 01.01.02 01.01.01 01.00.02 01.00.02 01.00.02 +mpi_targ.h 01.01.01 01.01.01 01.01.01 01.00.02 01.00.02 01.00.02 +mpi_fc.h 01.01.02 01.01.02 01.01.01 01.00.02 01.00.02 01.00.02 +mpi_lan.h 01.01.01 01.01.01 01.01.01 01.00.05 01.00.05 01.00.05 +mpi_type.h 01.01.01 01.01.01 01.01.01 01.00.01 01.00.01 01.00.01 + +Filename 01.00.04 01.00.03 01.00.02 01.00.01 00.10.02 00.10.01 +---------- -------- -------- -------- -------- -------- -------- +mpi.h 01.00.02 01.00.01 01.00.01 01.00.01 00.10.02 00.10.01 +mpi_ioc.h 01.00.02 01.00.02 01.00.01 01.00.01 00.10.02 00.10.01 +mpi_cnfg.h 01.00.03 01.00.02 01.00.02 01.00.01 00.10.01 00.10.01 +mpi_init.h 01.00.02 01.00.02 01.00.02 01.00.01 00.10.02 00.10.01 +mpi_targ.h 01.00.02 01.00.01 01.00.01 01.00.01 00.10.01 00.10.01 +mpi_fc.h 01.00.02 01.00.02 01.00.01 01.00.01 00.10.01 00.10.01 +mpi_lan.h 01.00.03 01.00.02 01.00.01 01.00.01 00.10.02 00.10.01 +mpi_type.h 01.00.01 01.00.01 01.00.01 01.00.01 00.10.01 00.10.01 + + + * -------------------------------------------------------------------------- + diff --git a/drivers/message/fusion/lsi/mpi_inb.h b/drivers/message/fusion/lsi/mpi_inb.h new file mode 100644 index 000000000000..dae29fbed56f --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_inb.h @@ -0,0 +1,220 @@ +/* + * Copyright (c) 2003 LSI Logic Corporation. + * + * + * Name: mpi_inb.h + * Title: MPI Inband structures and definitions + * Creation Date: September 30, 2003 + * + * mpi_inb.h Version: 01.03.xx + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * ??-??-?? 01.03.01 Original release. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_INB_H +#define MPI_INB_H + +/****************************************************************************** +* +* I n b a n d M e s s a g e s +* +*******************************************************************************/ + + +/****************************************************************************/ +/* Inband Buffer Post Request */ +/****************************************************************************/ + +typedef struct _MSG_INBAND_BUFFER_POST_REQUEST +{ + U8 Reserved1; /* 00h */ + U8 BufferCount; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved4; /* 0Ch */ + SGE_TRANS_SIMPLE_UNION SGL; /* 10h */ +} MSG_INBAND_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_INBAND_BUFFER_POST_REQUEST, + MpiInbandBufferPostRequest_t , MPI_POINTER pMpiInbandBufferPostRequest_t; + + +typedef struct _WWN_FC_FORMAT +{ + U64 NodeName; /* 00h */ + U64 PortName; /* 08h */ +} WWN_FC_FORMAT, MPI_POINTER PTR_WWN_FC_FORMAT, + WwnFcFormat_t, MPI_POINTER pWwnFcFormat_t; + +typedef struct _WWN_SAS_FORMAT +{ + U64 WorldWideID; /* 00h */ + U32 Reserved1; /* 08h */ + U32 Reserved2; /* 0Ch */ +} WWN_SAS_FORMAT, MPI_POINTER PTR_WWN_SAS_FORMAT, + WwnSasFormat_t, MPI_POINTER pWwnSasFormat_t; + +typedef union _WWN_INBAND_FORMAT +{ + WWN_FC_FORMAT Fc; + WWN_SAS_FORMAT Sas; +} WWN_INBAND_FORMAT, MPI_POINTER PTR_WWN_INBAND_FORMAT, + WwnInbandFormat, MPI_POINTER pWwnInbandFormat; + + +/* Inband Buffer Post reply message */ + +typedef struct _MSG_INBAND_BUFFER_POST_REPLY +{ + U16 Reserved1; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved4; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 TransferLength; /* 14h */ + U32 TransactionContext; /* 18h */ + WWN_INBAND_FORMAT Wwn; /* 1Ch */ + U32 IOCIdentifier[4]; /* 2Ch */ +} MSG_INBAND_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_INBAND_BUFFER_POST_REPLY, + MpiInbandBufferPostReply_t, MPI_POINTER pMpiInbandBufferPostReply_t; + + +/****************************************************************************/ +/* Inband Send Request */ +/****************************************************************************/ + +typedef struct _MSG_INBAND_SEND_REQUEST +{ + U16 Reserved1; /* 00h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved4; /* 0Ch */ + WWN_INBAND_FORMAT Wwn; /* 10h */ + U32 Reserved5; /* 20h */ + SGE_IO_UNION SGL; /* 24h */ +} MSG_INBAND_SEND_REQUEST, MPI_POINTER PTR_MSG_INBAND_SEND_REQUEST, + MpiInbandSendRequest_t , MPI_POINTER pMpiInbandSendRequest_t; + + +/* Inband Send reply message */ + +typedef struct _MSG_INBAND_SEND_REPLY +{ + U16 Reserved1; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved4; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 ResponseLength; /* 14h */ +} MSG_INBAND_SEND_REPLY, MPI_POINTER PTR_MSG_INBAND_SEND_REPLY, + MpiInbandSendReply_t, MPI_POINTER pMpiInbandSendReply_t; + + +/****************************************************************************/ +/* Inband Response Request */ +/****************************************************************************/ + +typedef struct _MSG_INBAND_RSP_REQUEST +{ + U16 Reserved1; /* 00h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved4; /* 0Ch */ + WWN_INBAND_FORMAT Wwn; /* 10h */ + U32 IOCIdentifier[4]; /* 20h */ + U32 ResponseLength; /* 30h */ + SGE_IO_UNION SGL; /* 34h */ +} MSG_INBAND_RSP_REQUEST, MPI_POINTER PTR_MSG_INBAND_RSP_REQUEST, + MpiInbandRspRequest_t , MPI_POINTER pMpiInbandRspRequest_t; + + +/* Inband Response reply message */ + +typedef struct _MSG_INBAND_RSP_REPLY +{ + U16 Reserved1; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved4; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_INBAND_RSP_REPLY, MPI_POINTER PTR_MSG_INBAND_RSP_REPLY, + MpiInbandRspReply_t, MPI_POINTER pMpiInbandRspReply_t; + + +/****************************************************************************/ +/* Inband Abort Request */ +/****************************************************************************/ + +typedef struct _MSG_INBAND_ABORT_REQUEST +{ + U8 Reserved1; /* 00h */ + U8 AbortType; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved4; /* 0Ch */ + U32 ContextToAbort; /* 10h */ +} MSG_INBAND_ABORT_REQUEST, MPI_POINTER PTR_MSG_INBAND_ABORT_REQUEST, + MpiInbandAbortRequest_t , MPI_POINTER pMpiInbandAbortRequest_t; + +#define MPI_INBAND_ABORT_TYPE_ALL_BUFFERS (0x00) +#define MPI_INBAND_ABORT_TYPE_EXACT_BUFFER (0x01) +#define MPI_INBAND_ABORT_TYPE_SEND_REQUEST (0x02) +#define MPI_INBAND_ABORT_TYPE_RESPONSE_REQUEST (0x03) + + +/* Inband Abort reply message */ + +typedef struct _MSG_INBAND_ABORT_REPLY +{ + U8 Reserved1; /* 00h */ + U8 AbortType; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved4; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_INBAND_ABORT_REPLY, MPI_POINTER PTR_MSG_INBAND_ABORT_REPLY, + MpiInbandAbortReply_t, MPI_POINTER pMpiInbandAbortReply_t; + + +#endif + diff --git a/drivers/message/fusion/lsi/mpi_init.h b/drivers/message/fusion/lsi/mpi_init.h new file mode 100644 index 000000000000..b3c95fd7256f --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_init.h @@ -0,0 +1,362 @@ +/* + * Copyright (c) 2000-2003 LSI Logic Corporation. + * + * + * Name: mpi_init.h + * Title: MPI initiator mode messages and structures + * Creation Date: June 8, 2000 + * + * mpi_init.h Version: 01.05.xx + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 05-24-00 00.10.02 Added SenseBufferLength to _MSG_SCSI_IO_REPLY. + * 06-06-00 01.00.01 Update version number for 1.0 release. + * 06-08-00 01.00.02 Added MPI_SCSI_RSP_INFO_ definitions. + * 11-02-00 01.01.01 Original release for post 1.0 work. + * 12-04-00 01.01.02 Added MPI_SCSIIO_CONTROL_NO_DISCONNECT. + * 02-20-01 01.01.03 Started using MPI_POINTER. + * 03-27-01 01.01.04 Added structure offset comments. + * 04-10-01 01.01.05 Added new MsgFlag for MSG_SCSI_TASK_MGMT. + * 08-08-01 01.02.01 Original release for v1.2 work. + * 08-29-01 01.02.02 Added MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET. + * Added MPI_SCSI_STATE_QUEUE_TAG_REJECTED for + * MSG_SCSI_IO_REPLY. + * 09-28-01 01.02.03 Added structures and defines for SCSI Enclosure + * Processor messages. + * 10-04-01 01.02.04 Added defines for SEP request Action field. + * 05-31-02 01.02.05 Added MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR define + * for SCSI IO requests. + * 11-15-02 01.02.06 Added special extended SCSI Status defines for FCP. + * 06-26-03 01.02.07 Added MPI_SCSI_STATUS_FCPEXT_UNASSIGNED define. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_INIT_H +#define MPI_INIT_H + + +/***************************************************************************** +* +* S C S I I n i t i a t o r M e s s a g e s +* +*****************************************************************************/ + +/****************************************************************************/ +/* SCSI IO messages and associated structures */ +/****************************************************************************/ + +typedef struct _MSG_SCSI_IO_REQUEST +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U8 CDBLength; /* 04h */ + U8 SenseBufferLength; /* 05h */ + U8 Reserved; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 LUN[8]; /* 0Ch */ + U32 Control; /* 14h */ + U8 CDB[16]; /* 18h */ + U32 DataLength; /* 28h */ + U32 SenseBufferLowAddr; /* 2Ch */ + SGE_IO_UNION SGL; /* 30h */ +} MSG_SCSI_IO_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_REQUEST, + SCSIIORequest_t, MPI_POINTER pSCSIIORequest_t; + + +/* SCSI IO MsgFlags bits */ + +#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH (0x01) +#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32 (0x00) +#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 (0x01) +#define MPI_SCSIIO_MSGFLGS_SENSE_LOCATION (0x02) +#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_HOST (0x00) +#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_IOC (0x02) +#define MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR (0x04) +#define MPI_SCSIIO_MSGFLGS_EEDP_TYPE_MASK (0xE0) +#define MPI_SCSIIO_MSGFLGS_EEDP_NONE (0x00) +#define MPI_SCSIIO_MSGFLGS_EEDP_RDPROTECT_T10 (0x20) +#define MPI_SCSIIO_MSGFLGS_EEDP_VRPROTECT_T10 (0x40) +#define MPI_SCSIIO_MSGFLGS_EEDP_WRPROTECT_T10 (0x60) +#define MPI_SCSIIO_MSGFLGS_EEDP_520_READ_MODE1 (0x20) +#define MPI_SCSIIO_MSGFLGS_EEDP_520_WRITE_MODE1 (0x40) +#define MPI_SCSIIO_MSGFLGS_EEDP_8_9_READ_MODE1 (0x60) +#define MPI_SCSIIO_MSGFLGS_EEDP_8_9_WRITE_MODE1 (0x80) + + +/* SCSI IO LUN fields */ + +#define MPI_SCSIIO_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF) +#define MPI_SCSIIO_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000) +#define MPI_SCSIIO_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF) +#define MPI_SCSIIO_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000) +#define MPI_SCSIIO_LUN_LEVEL_1_WORD (0xFF00) +#define MPI_SCSIIO_LUN_LEVEL_1_DWORD (0x0000FF00) + +/* SCSI IO Control bits */ + +#define MPI_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) +#define MPI_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) +#define MPI_SCSIIO_CONTROL_WRITE (0x01000000) +#define MPI_SCSIIO_CONTROL_READ (0x02000000) + +#define MPI_SCSIIO_CONTROL_ADDCDBLEN_MASK (0x3C000000) +#define MPI_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) + +#define MPI_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) +#define MPI_SCSIIO_CONTROL_SIMPLEQ (0x00000000) +#define MPI_SCSIIO_CONTROL_HEADOFQ (0x00000100) +#define MPI_SCSIIO_CONTROL_ORDEREDQ (0x00000200) +#define MPI_SCSIIO_CONTROL_ACAQ (0x00000400) +#define MPI_SCSIIO_CONTROL_UNTAGGED (0x00000500) +#define MPI_SCSIIO_CONTROL_NO_DISCONNECT (0x00000700) + +#define MPI_SCSIIO_CONTROL_TASKMANAGE_MASK (0x00FF0000) +#define MPI_SCSIIO_CONTROL_OBSOLETE (0x00800000) +#define MPI_SCSIIO_CONTROL_CLEAR_ACA_RSV (0x00400000) +#define MPI_SCSIIO_CONTROL_TARGET_RESET (0x00200000) +#define MPI_SCSIIO_CONTROL_LUN_RESET_RSV (0x00100000) +#define MPI_SCSIIO_CONTROL_RESERVED (0x00080000) +#define MPI_SCSIIO_CONTROL_CLR_TASK_SET_RSV (0x00040000) +#define MPI_SCSIIO_CONTROL_ABORT_TASK_SET (0x00020000) +#define MPI_SCSIIO_CONTROL_RESERVED2 (0x00010000) + + +/* SCSI IO reply structure */ +typedef struct _MSG_SCSI_IO_REPLY +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U8 CDBLength; /* 04h */ + U8 SenseBufferLength; /* 05h */ + U8 Reserved; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 SCSIStatus; /* 0Ch */ + U8 SCSIState; /* 0Dh */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 TransferCount; /* 14h */ + U32 SenseCount; /* 18h */ + U32 ResponseInfo; /* 1Ch */ +} MSG_SCSI_IO_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_REPLY, + SCSIIOReply_t, MPI_POINTER pSCSIIOReply_t; + + +/* SCSI IO Reply SCSIStatus values (SAM-2 status codes) */ + +#define MPI_SCSI_STATUS_SUCCESS (0x00) +#define MPI_SCSI_STATUS_CHECK_CONDITION (0x02) +#define MPI_SCSI_STATUS_CONDITION_MET (0x04) +#define MPI_SCSI_STATUS_BUSY (0x08) +#define MPI_SCSI_STATUS_INTERMEDIATE (0x10) +#define MPI_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) +#define MPI_SCSI_STATUS_RESERVATION_CONFLICT (0x18) +#define MPI_SCSI_STATUS_COMMAND_TERMINATED (0x22) +#define MPI_SCSI_STATUS_TASK_SET_FULL (0x28) +#define MPI_SCSI_STATUS_ACA_ACTIVE (0x30) + +#define MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT (0x80) +#define MPI_SCSI_STATUS_FCPEXT_NO_LINK (0x81) +#define MPI_SCSI_STATUS_FCPEXT_UNASSIGNED (0x82) + + +/* SCSI IO Reply SCSIState values */ + +#define MPI_SCSI_STATE_AUTOSENSE_VALID (0x01) +#define MPI_SCSI_STATE_AUTOSENSE_FAILED (0x02) +#define MPI_SCSI_STATE_NO_SCSI_STATUS (0x04) +#define MPI_SCSI_STATE_TERMINATED (0x08) +#define MPI_SCSI_STATE_RESPONSE_INFO_VALID (0x10) +#define MPI_SCSI_STATE_QUEUE_TAG_REJECTED (0x20) + +/* SCSI IO Reply ResponseInfo values */ +/* (FCP-1 RSP_CODE values and SPI-3 Packetized Failure codes) */ + +#define MPI_SCSI_RSP_INFO_FUNCTION_COMPLETE (0x00000000) +#define MPI_SCSI_RSP_INFO_FCP_BURST_LEN_ERROR (0x01000000) +#define MPI_SCSI_RSP_INFO_CMND_FIELDS_INVALID (0x02000000) +#define MPI_SCSI_RSP_INFO_FCP_DATA_RO_ERROR (0x03000000) +#define MPI_SCSI_RSP_INFO_TASK_MGMT_UNSUPPORTED (0x04000000) +#define MPI_SCSI_RSP_INFO_TASK_MGMT_FAILED (0x05000000) +#define MPI_SCSI_RSP_INFO_SPI_LQ_INVALID_TYPE (0x06000000) + + +/****************************************************************************/ +/* SCSI IO 32 Request message structure */ +/****************************************************************************/ + +typedef struct _MSG_SCSI_IO32_REQUEST +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U8 CDBLength; /* 04h */ + U8 SenseBufferLength; /* 05h */ + U8 Reserved; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 LUN[8]; /* 0Ch */ + U32 Control; /* 14h */ + U8 CDB[32]; /* 18h */ + U32 DataLength; /* 38h */ + U32 SenseBufferLowAddr; /* 3Ch */ + SGE_IO_UNION SGL; /* 40h */ +} MSG_SCSI_IO32_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO32_REQUEST, + SCSIIO32Request_t, MPI_POINTER pSCSIIO32Request_t; + +/* SCSI IO 32 uses the same defines as above for SCSI IO */ + + +/****************************************************************************/ +/* SCSI Task Management messages */ +/****************************************************************************/ + +typedef struct _MSG_SCSI_TASK_MGMT +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved; /* 04h */ + U8 TaskType; /* 05h */ + U8 Reserved1; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 LUN[8]; /* 0Ch */ + U32 Reserved2[7]; /* 14h */ + U32 TaskMsgContext; /* 30h */ +} MSG_SCSI_TASK_MGMT, MPI_POINTER PTR_SCSI_TASK_MGMT, + SCSITaskMgmt_t, MPI_POINTER pSCSITaskMgmt_t; + +/* TaskType values */ + +#define MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) +#define MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02) +#define MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) +#define MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS (0x04) +#define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) +#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) + +/* MsgFlags bits */ +#define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00) +#define MPI_SCSITASKMGMT_MSGFLAGS_LIP_RESET_OPTION (0x02) +#define MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION (0x04) + +/* SCSI Task Management Reply */ +typedef struct _MSG_SCSI_TASK_MGMT_REPLY +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved; /* 04h */ + U8 TaskType; /* 05h */ + U8 Reserved1; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 Reserved2[2]; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 TerminationCount; /* 14h */ +} MSG_SCSI_TASK_MGMT_REPLY, MPI_POINTER PTR_MSG_SCSI_TASK_MGMT_REPLY, + SCSITaskMgmtReply_t, MPI_POINTER pSCSITaskMgmtReply_t; + + +/****************************************************************************/ +/* SCSI Enclosure Processor messages */ +/****************************************************************************/ + +typedef struct _MSG_SEP_REQUEST +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U8 Action; /* 04h */ + U8 Reserved1; /* 05h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 SlotStatus; /* 0Ch */ +} MSG_SEP_REQUEST, MPI_POINTER PTR_MSG_SEP_REQUEST, + SEPRequest_t, MPI_POINTER pSEPRequest_t; + +/* Action defines */ +#define MPI_SEP_REQ_ACTION_WRITE_STATUS (0x00) +#define MPI_SEP_REQ_ACTION_READ_STATUS (0x01) + +/* SlotStatus bits for MSG_SEP_REQUEST */ +#define MPI_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) +#define MPI_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) +#define MPI_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) +#define MPI_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) +#define MPI_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) +#define MPI_SEP_REQ_SLOTSTATUS_PARITY_CHECK (0x00000020) +#define MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) +#define MPI_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) +#define MPI_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200) +#define MPI_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) +#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000) +#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_INSERT (0x00080000) +#define MPI_SEP_REQ_SLOTSTATUS_DO_NOT_MOVE (0x00400000) +#define MPI_SEP_REQ_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000) +#define MPI_SEP_REQ_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000) +#define MPI_SEP_REQ_SLOTSTATUS_DEV_OFF (0x10000000) +#define MPI_SEP_REQ_SLOTSTATUS_SWAP_RESET (0x80000000) + + +typedef struct _MSG_SEP_REPLY +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U8 Action; /* 04h */ + U8 Reserved1; /* 05h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved3; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 SlotStatus; /* 14h */ +} MSG_SEP_REPLY, MPI_POINTER PTR_MSG_SEP_REPLY, + SEPReply_t, MPI_POINTER pSEPReply_t; + +/* SlotStatus bits for MSG_SEP_REPLY */ +#define MPI_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) +#define MPI_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) +#define MPI_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) +#define MPI_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) +#define MPI_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) +#define MPI_SEP_REPLY_SLOTSTATUS_PARITY_CHECK (0x00000020) +#define MPI_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) +#define MPI_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) +#define MPI_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200) +#define MPI_SEP_REPLY_SLOTSTATUS_REPORT (0x00010000) +#define MPI_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) +#define MPI_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000) +#define MPI_SEP_REPLY_SLOTSTATUS_INSERT_READY (0x00080000) +#define MPI_SEP_REPLY_SLOTSTATUS_DO_NOT_REMOVE (0x00400000) +#define MPI_SEP_REPLY_SLOTSTATUS_B_BYPASS_ENABLED (0x01000000) +#define MPI_SEP_REPLY_SLOTSTATUS_A_BYPASS_ENABLED (0x02000000) +#define MPI_SEP_REPLY_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000) +#define MPI_SEP_REPLY_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000) +#define MPI_SEP_REPLY_SLOTSTATUS_DEV_OFF (0x10000000) +#define MPI_SEP_REPLY_SLOTSTATUS_FAULT_SENSED (0x40000000) +#define MPI_SEP_REPLY_SLOTSTATUS_SWAPPED (0x80000000) + +#endif diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h new file mode 100644 index 000000000000..82445d18b4d5 --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_ioc.h @@ -0,0 +1,770 @@ +/* + * Copyright (c) 2000-2003 LSI Logic Corporation. + * + * + * Name: mpi_ioc.h + * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages + * Creation Date: August 11, 2000 + * + * mpi_ioc.h Version: 01.05.xx + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 05-24-00 00.10.02 Added _MSG_IOC_INIT_REPLY structure. + * 06-06-00 01.00.01 Added CurReplyFrameSize field to _MSG_IOC_FACTS_REPLY. + * 06-12-00 01.00.02 Added _MSG_PORT_ENABLE_REPLY structure. + * Added _MSG_EVENT_ACK_REPLY structure. + * Added _MSG_FW_DOWNLOAD_REPLY structure. + * Added _MSG_TOOLBOX_REPLY structure. + * 06-30-00 01.00.03 Added MaxLanBuckets to _PORT_FACT_REPLY structure. + * 07-27-00 01.00.04 Added _EVENT_DATA structure definitions for _SCSI, + * _LINK_STATUS, _LOOP_STATE and _LOGOUT. + * 08-11-00 01.00.05 Switched positions of MsgLength and Function fields in + * _MSG_EVENT_ACK_REPLY structure to match specification. + * 11-02-00 01.01.01 Original release for post 1.0 work. + * Added a value for Manufacturer to WhoInit. + * 12-04-00 01.01.02 Modified IOCFacts reply, added FWUpload messages, and + * removed toolbox message. + * 01-09-01 01.01.03 Added event enabled and disabled defines. + * Added structures for FwHeader and DataHeader. + * Added ImageType to FwUpload reply. + * 02-20-01 01.01.04 Started using MPI_POINTER. + * 02-27-01 01.01.05 Added event for RAID status change and its event data. + * Added IocNumber field to MSG_IOC_FACTS_REPLY. + * 03-27-01 01.01.06 Added defines for ProductId field of MPI_FW_HEADER. + * Added structure offset comments. + * 04-09-01 01.01.07 Added structure EVENT_DATA_EVENT_CHANGE. + * 08-08-01 01.02.01 Original release for v1.2 work. + * New format for FWVersion and ProductId in + * MSG_IOC_FACTS_REPLY and MPI_FW_HEADER. + * 08-31-01 01.02.02 Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and + * related structure and defines. + * Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED. + * Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE. + * Replaced a reserved field in MSG_IOC_FACTS_REPLY with + * IOCExceptions and changed DataImageSize to reserved. + * Added MPI_FW_DOWNLOAD_ITYPE_NVSTORE_DATA and + * MPI_FW_UPLOAD_ITYPE_NVDATA. + * 09-28-01 01.02.03 Modified Event Data for Integrated RAID. + * 11-01-01 01.02.04 Added defines for MPI_EXT_IMAGE_HEADER ImageType field. + * 03-14-02 01.02.05 Added HeaderVersion field to MSG_IOC_FACTS_REPLY. + * 05-31-02 01.02.06 Added define for + * MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID. + * Added AliasIndex to EVENT_DATA_LOGOUT structure. + * 04-01-03 01.02.07 Added defines for MPI_FW_HEADER_SIGNATURE_. + * 06-26-03 01.02.08 Added new values to the product family defines. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_IOC_H +#define MPI_IOC_H + + +/***************************************************************************** +* +* I O C M e s s a g e s +* +*****************************************************************************/ + +/****************************************************************************/ +/* IOCInit message */ +/****************************************************************************/ + +typedef struct _MSG_IOC_INIT +{ + U8 WhoInit; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U8 Flags; /* 04h */ + U8 MaxDevices; /* 05h */ + U8 MaxBuses; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 ReplyFrameSize; /* 0Ch */ + U8 Reserved1[2]; /* 0Eh */ + U32 HostMfaHighAddr; /* 10h */ + U32 SenseBufferHighAddr; /* 14h */ + U32 ReplyFifoHostSignalingAddr; /* 18h */ +} MSG_IOC_INIT, MPI_POINTER PTR_MSG_IOC_INIT, + IOCInit_t, MPI_POINTER pIOCInit_t; + +/* WhoInit values */ +#define MPI_WHOINIT_NO_ONE (0x00) +#define MPI_WHOINIT_SYSTEM_BIOS (0x01) +#define MPI_WHOINIT_ROM_BIOS (0x02) +#define MPI_WHOINIT_PCI_PEER (0x03) +#define MPI_WHOINIT_HOST_DRIVER (0x04) +#define MPI_WHOINIT_MANUFACTURER (0x05) + +/* Flags values */ +#define MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE (0x01) +#define MPI_IOCINIT_FLAGS_REPLY_FIFO_HOST_SIGNAL (0x02) + +typedef struct _MSG_IOC_INIT_REPLY +{ + U8 WhoInit; /* 00h */ + U8 Reserved; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U8 Flags; /* 04h */ + U8 MaxDevices; /* 05h */ + U8 MaxBuses; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved2; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_IOC_INIT_REPLY, MPI_POINTER PTR_MSG_IOC_INIT_REPLY, + IOCInitReply_t, MPI_POINTER pIOCInitReply_t; + + + +/****************************************************************************/ +/* IOC Facts message */ +/****************************************************************************/ + +typedef struct _MSG_IOC_FACTS +{ + U8 Reserved[2]; /* 00h */ + U8 ChainOffset; /* 01h */ + U8 Function; /* 02h */ + U8 Reserved1[3]; /* 03h */ + U8 MsgFlags; /* 04h */ + U32 MsgContext; /* 08h */ +} MSG_IOC_FACTS, MPI_POINTER PTR_IOC_FACTS, + IOCFacts_t, MPI_POINTER pIOCFacts_t; + +typedef struct _MPI_FW_VERSION_STRUCT +{ + U8 Dev; /* 00h */ + U8 Unit; /* 01h */ + U8 Minor; /* 02h */ + U8 Major; /* 03h */ +} MPI_FW_VERSION_STRUCT; + +typedef union _MPI_FW_VERSION +{ + MPI_FW_VERSION_STRUCT Struct; + U32 Word; +} MPI_FW_VERSION; + +/* IOC Facts Reply */ +typedef struct _MSG_IOC_FACTS_REPLY +{ + U16 MsgVersion; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 HeaderVersion; /* 04h */ + U8 IOCNumber; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 IOCExceptions; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U8 MaxChainDepth; /* 14h */ + U8 WhoInit; /* 15h */ + U8 BlockSize; /* 16h */ + U8 Flags; /* 17h */ + U16 ReplyQueueDepth; /* 18h */ + U16 RequestFrameSize; /* 1Ah */ + U16 Reserved_0101_FWVersion; /* 1Ch */ /* obsolete 16-bit FWVersion */ + U16 ProductID; /* 1Eh */ + U32 CurrentHostMfaHighAddr; /* 20h */ + U16 GlobalCredits; /* 24h */ + U8 NumberOfPorts; /* 26h */ + U8 EventState; /* 27h */ + U32 CurrentSenseBufferHighAddr; /* 28h */ + U16 CurReplyFrameSize; /* 2Ch */ + U8 MaxDevices; /* 2Eh */ + U8 MaxBuses; /* 2Fh */ + U32 FWImageSize; /* 30h */ + U32 IOCCapabilities; /* 34h */ + MPI_FW_VERSION FWVersion; /* 38h */ + U16 HighPriorityQueueDepth; /* 3Ch */ + U16 Reserved2; /* 3Eh */ +} MSG_IOC_FACTS_REPLY, MPI_POINTER PTR_MSG_IOC_FACTS_REPLY, + IOCFactsReply_t, MPI_POINTER pIOCFactsReply_t; + +#define MPI_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) +#define MPI_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) + +#define MPI_IOCFACTS_HEADERVERSION_UNIT_MASK (0xFF00) +#define MPI_IOCFACTS_HEADERVERSION_DEV_MASK (0x00FF) + +#define MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) +#define MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) +#define MPI_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) +#define MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL (0x0008) + +#define MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT (0x01) + +#define MPI_IOCFACTS_EVENTSTATE_DISABLED (0x00) +#define MPI_IOCFACTS_EVENTSTATE_ENABLED (0x01) + +#define MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q (0x00000001) +#define MPI_IOCFACTS_CAPABILITY_REPLY_HOST_SIGNAL (0x00000002) +#define MPI_IOCFACTS_CAPABILITY_QUEUE_FULL_HANDLING (0x00000004) +#define MPI_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) +#define MPI_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) +#define MPI_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020) +#define MPI_IOCFACTS_CAPABILITY_EEDP (0x00000040) + + + +/***************************************************************************** +* +* P o r t M e s s a g e s +* +*****************************************************************************/ + +/****************************************************************************/ +/* Port Facts message and Reply */ +/****************************************************************************/ + +typedef struct _MSG_PORT_FACTS +{ + U8 Reserved[2]; /* 00h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved1[2]; /* 04h */ + U8 PortNumber; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ +} MSG_PORT_FACTS, MPI_POINTER PTR_MSG_PORT_FACTS, + PortFacts_t, MPI_POINTER pPortFacts_t; + +typedef struct _MSG_PORT_FACTS_REPLY +{ + U16 Reserved; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 PortNumber; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved2; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U8 Reserved3; /* 14h */ + U8 PortType; /* 15h */ + U16 MaxDevices; /* 16h */ + U16 PortSCSIID; /* 18h */ + U16 ProtocolFlags; /* 1Ah */ + U16 MaxPostedCmdBuffers; /* 1Ch */ + U16 MaxPersistentIDs; /* 1Eh */ + U16 MaxLanBuckets; /* 20h */ + U16 Reserved4; /* 22h */ + U32 Reserved5; /* 24h */ +} MSG_PORT_FACTS_REPLY, MPI_POINTER PTR_MSG_PORT_FACTS_REPLY, + PortFactsReply_t, MPI_POINTER pPortFactsReply_t; + + +/* PortTypes values */ + +#define MPI_PORTFACTS_PORTTYPE_INACTIVE (0x00) +#define MPI_PORTFACTS_PORTTYPE_SCSI (0x01) +#define MPI_PORTFACTS_PORTTYPE_FC (0x10) +#define MPI_PORTFACTS_PORTTYPE_ISCSI (0x20) +#define MPI_PORTFACTS_PORTTYPE_SAS (0x30) + +/* ProtocolFlags values */ + +#define MPI_PORTFACTS_PROTOCOL_LOGBUSADDR (0x01) +#define MPI_PORTFACTS_PROTOCOL_LAN (0x02) +#define MPI_PORTFACTS_PROTOCOL_TARGET (0x04) +#define MPI_PORTFACTS_PROTOCOL_INITIATOR (0x08) + + +/****************************************************************************/ +/* Port Enable Message */ +/****************************************************************************/ + +typedef struct _MSG_PORT_ENABLE +{ + U8 Reserved[2]; /* 00h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved1[2]; /* 04h */ + U8 PortNumber; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ +} MSG_PORT_ENABLE, MPI_POINTER PTR_MSG_PORT_ENABLE, + PortEnable_t, MPI_POINTER pPortEnable_t; + +typedef struct _MSG_PORT_ENABLE_REPLY +{ + U8 Reserved[2]; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved1[2]; /* 04h */ + U8 PortNumber; /* 05h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved2; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_PORT_ENABLE_REPLY, MPI_POINTER PTR_MSG_PORT_ENABLE_REPLY, + PortEnableReply_t, MPI_POINTER pPortEnableReply_t; + + +/***************************************************************************** +* +* E v e n t M e s s a g e s +* +*****************************************************************************/ + +/****************************************************************************/ +/* Event Notification messages */ +/****************************************************************************/ + +typedef struct _MSG_EVENT_NOTIFY +{ + U8 Switch; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved1[3]; /* 04h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ +} MSG_EVENT_NOTIFY, MPI_POINTER PTR_MSG_EVENT_NOTIFY, + EventNotification_t, MPI_POINTER pEventNotification_t; + +/* Event Notification Reply */ + +typedef struct _MSG_EVENT_NOTIFY_REPLY +{ + U16 EventDataLength; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved1[2]; /* 04h */ + U8 AckRequired; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 Reserved2[2]; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 Event; /* 14h */ + U32 EventContext; /* 18h */ + U32 Data[1]; /* 1Ch */ +} MSG_EVENT_NOTIFY_REPLY, MPI_POINTER PTR_MSG_EVENT_NOTIFY_REPLY, + EventNotificationReply_t, MPI_POINTER pEventNotificationReply_t; + +/* Event Acknowledge */ + +typedef struct _MSG_EVENT_ACK +{ + U8 Reserved[2]; /* 00h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved1[3]; /* 04h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Event; /* 0Ch */ + U32 EventContext; /* 10h */ +} MSG_EVENT_ACK, MPI_POINTER PTR_MSG_EVENT_ACK, + EventAck_t, MPI_POINTER pEventAck_t; + +typedef struct _MSG_EVENT_ACK_REPLY +{ + U8 Reserved[2]; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved1[3]; /* 04h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved2; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_EVENT_ACK_REPLY, MPI_POINTER PTR_MSG_EVENT_ACK_REPLY, + EventAckReply_t, MPI_POINTER pEventAckReply_t; + +/* Switch */ + +#define MPI_EVENT_NOTIFICATION_SWITCH_OFF (0x00) +#define MPI_EVENT_NOTIFICATION_SWITCH_ON (0x01) + +/* Event */ + +#define MPI_EVENT_NONE (0x00000000) +#define MPI_EVENT_LOG_DATA (0x00000001) +#define MPI_EVENT_STATE_CHANGE (0x00000002) +#define MPI_EVENT_UNIT_ATTENTION (0x00000003) +#define MPI_EVENT_IOC_BUS_RESET (0x00000004) +#define MPI_EVENT_EXT_BUS_RESET (0x00000005) +#define MPI_EVENT_RESCAN (0x00000006) +#define MPI_EVENT_LINK_STATUS_CHANGE (0x00000007) +#define MPI_EVENT_LOOP_STATE_CHANGE (0x00000008) +#define MPI_EVENT_LOGOUT (0x00000009) +#define MPI_EVENT_EVENT_CHANGE (0x0000000A) +#define MPI_EVENT_INTEGRATED_RAID (0x0000000B) +#define MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE (0x0000000C) +#define MPI_EVENT_ON_BUS_TIMER_EXPIRED (0x0000000D) +#define MPI_EVENT_QUEUE_FULL (0x0000000E) +#define MPI_EVENT_SAS_DEVICE_STATUS_CHANGE (0x0000000F) +#define MPI_EVENT_SAS_SES (0x00000010) +#define MPI_EVENT_PERSISTENT_TABLE_FULL (0x00000011) + +/* AckRequired field values */ + +#define MPI_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) +#define MPI_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) + +/* EventChange Event data */ + +typedef struct _EVENT_DATA_EVENT_CHANGE +{ + U8 EventState; /* 00h */ + U8 Reserved; /* 01h */ + U16 Reserved1; /* 02h */ +} EVENT_DATA_EVENT_CHANGE, MPI_POINTER PTR_EVENT_DATA_EVENT_CHANGE, + EventDataEventChange_t, MPI_POINTER pEventDataEventChange_t; + +/* SCSI Event data for Port, Bus and Device forms */ + +typedef struct _EVENT_DATA_SCSI +{ + U8 TargetID; /* 00h */ + U8 BusPort; /* 01h */ + U16 Reserved; /* 02h */ +} EVENT_DATA_SCSI, MPI_POINTER PTR_EVENT_DATA_SCSI, + EventDataScsi_t, MPI_POINTER pEventDataScsi_t; + +/* SCSI Device Status Change Event data */ + +typedef struct _EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 ReasonCode; /* 02h */ + U8 LUN; /* 03h */ + U8 ASC; /* 04h */ + U8 ASCQ; /* 05h */ + U16 Reserved; /* 06h */ +} EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE, + MPI_POINTER PTR_EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE, + MpiEventDataScsiDeviceStatusChange_t, + MPI_POINTER pMpiEventDataScsiDeviceStatusChange_t; + +/* MPI SCSI Device Status Change Event data ReasonCode values */ +#define MPI_EVENT_SCSI_DEV_STAT_RC_ADDED (0x03) +#define MPI_EVENT_SCSI_DEV_STAT_RC_NOT_RESPONDING (0x04) +#define MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA (0x05) + +/* SAS Device Status Change Event data */ + +typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 ReasonCode; /* 02h */ + U8 Reserved; /* 03h */ + U8 ASC; /* 04h */ + U8 ASCQ; /* 05h */ + U16 DevHandle; /* 06h */ + U32 DeviceInfo; /* 08h */ +} EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, + MPI_POINTER PTR_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, + MpiEventDataSasDeviceStatusChange_t, + MPI_POINTER pMpiEventDataSasDeviceStatusChange_t; + +/* MPI SAS Device Status Change Event data ReasonCode values */ +#define MPI_EVENT_SAS_DEV_STAT_RC_ADDED (0x03) +#define MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING (0x04) +#define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) +#define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED (0x06) + +/* SCSI Event data for Queue Full event */ + +typedef struct _EVENT_DATA_QUEUE_FULL +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U16 CurrentDepth; /* 02h */ +} EVENT_DATA_QUEUE_FULL, MPI_POINTER PTR_EVENT_DATA_QUEUE_FULL, + EventDataQueueFull_t, MPI_POINTER pEventDataQueueFull_t; + +/* MPI Link Status Change Event data */ + +typedef struct _EVENT_DATA_LINK_STATUS +{ + U8 State; /* 00h */ + U8 Reserved; /* 01h */ + U16 Reserved1; /* 02h */ + U8 Reserved2; /* 04h */ + U8 Port; /* 05h */ + U16 Reserved3; /* 06h */ +} EVENT_DATA_LINK_STATUS, MPI_POINTER PTR_EVENT_DATA_LINK_STATUS, + EventDataLinkStatus_t, MPI_POINTER pEventDataLinkStatus_t; + +#define MPI_EVENT_LINK_STATUS_FAILURE (0x00000000) +#define MPI_EVENT_LINK_STATUS_ACTIVE (0x00000001) + +/* MPI Loop State Change Event data */ + +typedef struct _EVENT_DATA_LOOP_STATE +{ + U8 Character4; /* 00h */ + U8 Character3; /* 01h */ + U8 Type; /* 02h */ + U8 Reserved; /* 03h */ + U8 Reserved1; /* 04h */ + U8 Port; /* 05h */ + U16 Reserved2; /* 06h */ +} EVENT_DATA_LOOP_STATE, MPI_POINTER PTR_EVENT_DATA_LOOP_STATE, + EventDataLoopState_t, MPI_POINTER pEventDataLoopState_t; + +#define MPI_EVENT_LOOP_STATE_CHANGE_LIP (0x0001) +#define MPI_EVENT_LOOP_STATE_CHANGE_LPE (0x0002) +#define MPI_EVENT_LOOP_STATE_CHANGE_LPB (0x0003) + +/* MPI LOGOUT Event data */ + +typedef struct _EVENT_DATA_LOGOUT +{ + U32 NPortID; /* 00h */ + U8 AliasIndex; /* 04h */ + U8 Port; /* 05h */ + U16 Reserved1; /* 06h */ +} EVENT_DATA_LOGOUT, MPI_POINTER PTR_EVENT_DATA_LOGOUT, + EventDataLogout_t, MPI_POINTER pEventDataLogout_t; + +#define MPI_EVENT_LOGOUT_ALL_ALIASES (0xFF) + + +/* MPI Integrated RAID Event data */ + +typedef struct _EVENT_DATA_RAID +{ + U8 VolumeID; /* 00h */ + U8 VolumeBus; /* 01h */ + U8 ReasonCode; /* 02h */ + U8 PhysDiskNum; /* 03h */ + U8 ASC; /* 04h */ + U8 ASCQ; /* 05h */ + U16 Reserved; /* 06h */ + U32 SettingsStatus; /* 08h */ +} EVENT_DATA_RAID, MPI_POINTER PTR_EVENT_DATA_RAID, + MpiEventDataRaid_t, MPI_POINTER pMpiEventDataRaid_t; + +/* MPI Integrated RAID Event data ReasonCode values */ +#define MPI_EVENT_RAID_RC_VOLUME_CREATED (0x00) +#define MPI_EVENT_RAID_RC_VOLUME_DELETED (0x01) +#define MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED (0x02) +#define MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED (0x03) +#define MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED (0x04) +#define MPI_EVENT_RAID_RC_PHYSDISK_CREATED (0x05) +#define MPI_EVENT_RAID_RC_PHYSDISK_DELETED (0x06) +#define MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED (0x07) +#define MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED (0x08) +#define MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED (0x09) +#define MPI_EVENT_RAID_RC_SMART_DATA (0x0A) +#define MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED (0x0B) + + +/***************************************************************************** +* +* F i r m w a r e L o a d M e s s a g e s +* +*****************************************************************************/ + +/****************************************************************************/ +/* Firmware Download message and associated structures */ +/****************************************************************************/ + +typedef struct _MSG_FW_DOWNLOAD +{ + U8 ImageType; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved1[3]; /* 04h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + SGE_MPI_UNION SGL; /* 0Ch */ +} MSG_FW_DOWNLOAD, MPI_POINTER PTR_MSG_FW_DOWNLOAD, + FWDownload_t, MPI_POINTER pFWDownload_t; + +#define MPI_FW_DOWNLOAD_ITYPE_RESERVED (0x00) +#define MPI_FW_DOWNLOAD_ITYPE_FW (0x01) +#define MPI_FW_DOWNLOAD_ITYPE_BIOS (0x02) +#define MPI_FW_DOWNLOAD_ITYPE_NVDATA (0x03) +#define MPI_FW_DOWNLOAD_ITYPE_BOOTLOADER (0x04) + + +typedef struct _FWDownloadTCSGE +{ + U8 Reserved; /* 00h */ + U8 ContextSize; /* 01h */ + U8 DetailsLength; /* 02h */ + U8 Flags; /* 03h */ + U32 Reserved_0100_Checksum; /* 04h */ /* obsolete Checksum */ + U32 ImageOffset; /* 08h */ + U32 ImageSize; /* 0Ch */ +} FW_DOWNLOAD_TCSGE, MPI_POINTER PTR_FW_DOWNLOAD_TCSGE, + FWDownloadTCSGE_t, MPI_POINTER pFWDownloadTCSGE_t; + +/* Firmware Download reply */ +typedef struct _MSG_FW_DOWNLOAD_REPLY +{ + U8 ImageType; /* 00h */ + U8 Reserved; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved1[3]; /* 04h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved2; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_FW_DOWNLOAD_REPLY, MPI_POINTER PTR_MSG_FW_DOWNLOAD_REPLY, + FWDownloadReply_t, MPI_POINTER pFWDownloadReply_t; + + +/****************************************************************************/ +/* Firmware Upload message and associated structures */ +/****************************************************************************/ + +typedef struct _MSG_FW_UPLOAD +{ + U8 ImageType; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved1[3]; /* 04h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + SGE_MPI_UNION SGL; /* 0Ch */ +} MSG_FW_UPLOAD, MPI_POINTER PTR_MSG_FW_UPLOAD, + FWUpload_t, MPI_POINTER pFWUpload_t; + +#define MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM (0x00) +#define MPI_FW_UPLOAD_ITYPE_FW_FLASH (0x01) +#define MPI_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) +#define MPI_FW_UPLOAD_ITYPE_NVDATA (0x03) +#define MPI_FW_UPLOAD_ITYPE_BOOTLOADER (0x04) + +typedef struct _FWUploadTCSGE +{ + U8 Reserved; /* 00h */ + U8 ContextSize; /* 01h */ + U8 DetailsLength; /* 02h */ + U8 Flags; /* 03h */ + U32 Reserved1; /* 04h */ + U32 ImageOffset; /* 08h */ + U32 ImageSize; /* 0Ch */ +} FW_UPLOAD_TCSGE, MPI_POINTER PTR_FW_UPLOAD_TCSGE, + FWUploadTCSGE_t, MPI_POINTER pFWUploadTCSGE_t; + +/* Firmware Upload reply */ +typedef struct _MSG_FW_UPLOAD_REPLY +{ + U8 ImageType; /* 00h */ + U8 Reserved; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved1[3]; /* 04h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved2; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 ActualImageSize; /* 14h */ +} MSG_FW_UPLOAD_REPLY, MPI_POINTER PTR_MSG_FW_UPLOAD_REPLY, + FWUploadReply_t, MPI_POINTER pFWUploadReply_t; + + +typedef struct _MPI_FW_HEADER +{ + U32 ArmBranchInstruction0; /* 00h */ + U32 Signature0; /* 04h */ + U32 Signature1; /* 08h */ + U32 Signature2; /* 0Ch */ + U32 ArmBranchInstruction1; /* 10h */ + U32 ArmBranchInstruction2; /* 14h */ + U32 Reserved; /* 18h */ + U32 Checksum; /* 1Ch */ + U16 VendorId; /* 20h */ + U16 ProductId; /* 22h */ + MPI_FW_VERSION FWVersion; /* 24h */ + U32 SeqCodeVersion; /* 28h */ + U32 ImageSize; /* 2Ch */ + U32 NextImageHeaderOffset; /* 30h */ + U32 LoadStartAddress; /* 34h */ + U32 IopResetVectorValue; /* 38h */ + U32 IopResetRegAddr; /* 3Ch */ + U32 VersionNameWhat; /* 40h */ + U8 VersionName[32]; /* 44h */ + U32 VendorNameWhat; /* 64h */ + U8 VendorName[32]; /* 68h */ +} MPI_FW_HEADER, MPI_POINTER PTR_MPI_FW_HEADER, + MpiFwHeader_t, MPI_POINTER pMpiFwHeader_t; + +#define MPI_FW_HEADER_WHAT_SIGNATURE (0x29232840) + +/* defines for using the ProductId field */ +#define MPI_FW_HEADER_PID_TYPE_MASK (0xF000) +#define MPI_FW_HEADER_PID_TYPE_SCSI (0x0000) +#define MPI_FW_HEADER_PID_TYPE_FC (0x1000) +#define MPI_FW_HEADER_PID_TYPE_SAS (0x2000) + +#define MPI_FW_HEADER_SIGNATURE_0 (0x5AEAA55A) +#define MPI_FW_HEADER_SIGNATURE_1 (0xA55AEAA5) +#define MPI_FW_HEADER_SIGNATURE_2 (0x5AA55AEA) + +#define MPI_FW_HEADER_PID_PROD_MASK (0x0F00) +#define MPI_FW_HEADER_PID_PROD_INITIATOR_SCSI (0x0100) +#define MPI_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200) +#define MPI_FW_HEADER_PID_PROD_TARGET_SCSI (0x0300) +#define MPI_FW_HEADER_PID_PROD_IM_SCSI (0x0400) +#define MPI_FW_HEADER_PID_PROD_IS_SCSI (0x0500) +#define MPI_FW_HEADER_PID_PROD_CTX_SCSI (0x0600) + +#define MPI_FW_HEADER_PID_FAMILY_MASK (0x00FF) +/* SCSI */ +#define MPI_FW_HEADER_PID_FAMILY_1030A0_SCSI (0x0001) +#define MPI_FW_HEADER_PID_FAMILY_1030B0_SCSI (0x0002) +#define MPI_FW_HEADER_PID_FAMILY_1030B1_SCSI (0x0003) +#define MPI_FW_HEADER_PID_FAMILY_1030C0_SCSI (0x0004) +#define MPI_FW_HEADER_PID_FAMILY_1020A0_SCSI (0x0005) +#define MPI_FW_HEADER_PID_FAMILY_1020B0_SCSI (0x0006) +#define MPI_FW_HEADER_PID_FAMILY_1020B1_SCSI (0x0007) +#define MPI_FW_HEADER_PID_FAMILY_1020C0_SCSI (0x0008) +#define MPI_FW_HEADER_PID_FAMILY_1035A0_SCSI (0x0009) +#define MPI_FW_HEADER_PID_FAMILY_1035B0_SCSI (0x000A) +#define MPI_FW_HEADER_PID_FAMILY_1030TA0_SCSI (0x000B) +#define MPI_FW_HEADER_PID_FAMILY_1020TA0_SCSI (0x000C) +/* Fibre Channel */ +#define MPI_FW_HEADER_PID_FAMILY_909_FC (0x0000) +#define MPI_FW_HEADER_PID_FAMILY_919_FC (0x0001) +#define MPI_FW_HEADER_PID_FAMILY_919X_FC (0x0002) +#define MPI_FW_HEADER_PID_FAMILY_919XL_FC (0x0003) +#define MPI_FW_HEADER_PID_FAMILY_949_FC (0x0004) +#define MPI_FW_HEADER_PID_FAMILY_959_FC (0x0005) +/* SAS */ +#define MPI_FW_HEADER_PID_FAMILY_1064_SAS (0x0001) + +typedef struct _MPI_EXT_IMAGE_HEADER +{ + U8 ImageType; /* 00h */ + U8 Reserved; /* 01h */ + U16 Reserved1; /* 02h */ + U32 Checksum; /* 04h */ + U32 ImageSize; /* 08h */ + U32 NextImageHeaderOffset; /* 0Ch */ + U32 LoadStartAddress; /* 10h */ + U32 Reserved2; /* 14h */ +} MPI_EXT_IMAGE_HEADER, MPI_POINTER PTR_MPI_EXT_IMAGE_HEADER, + MpiExtImageHeader_t, MPI_POINTER pMpiExtImageHeader_t; + +/* defines for the ImageType field */ +#define MPI_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) +#define MPI_EXT_IMAGE_TYPE_FW (0x01) +#define MPI_EXT_IMAGE_TYPE_NVDATA (0x03) +#define MPI_EXT_IMAGE_TYPE_BOOTLOADER (0x04) + +#endif diff --git a/drivers/message/fusion/lsi/mpi_lan.h b/drivers/message/fusion/lsi/mpi_lan.h new file mode 100644 index 000000000000..3ced12784ee8 --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_lan.h @@ -0,0 +1,212 @@ +/* + * Copyright (c) 2000-2003 LSI Logic Corporation. + * + * + * Name: mpi_lan.h + * Title: MPI LAN messages and structures + * Creation Date: June 30, 2000 + * + * mpi_lan.h Version: 01.05.xx + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 05-24-00 00.10.02 Added LANStatus field to _MSG_LAN_SEND_REPLY. + * Added LANStatus field to _MSG_LAN_RECEIVE_POST_REPLY. + * Moved ListCount field in _MSG_LAN_RECEIVE_POST_REPLY. + * 06-06-00 01.00.01 Update version number for 1.0 release. + * 06-12-00 01.00.02 Added MPI_ to BUCKETSTATUS_ definitions. + * 06-22-00 01.00.03 Major changes to match new LAN definition in 1.0 spec. + * 06-30-00 01.00.04 Added Context Reply definitions per revised proposal. + * Changed transaction context usage to bucket/buffer. + * 07-05-00 01.00.05 Removed LAN_RECEIVE_POST_BUCKET_CONTEXT_MASK definition + * to lan private header file + * 11-02-00 01.01.01 Original release for post 1.0 work + * 02-20-01 01.01.02 Started using MPI_POINTER. + * 03-27-01 01.01.03 Added structure offset comments. + * 08-08-01 01.02.01 Original release for v1.2 work. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_LAN_H +#define MPI_LAN_H + + +/****************************************************************************** +* +* L A N M e s s a g e s +* +*******************************************************************************/ + +/* LANSend messages */ + +typedef struct _MSG_LAN_SEND_REQUEST +{ + U16 Reserved; /* 00h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 PortNumber; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + SGE_MPI_UNION SG_List[1]; /* 0Ch */ +} MSG_LAN_SEND_REQUEST, MPI_POINTER PTR_MSG_LAN_SEND_REQUEST, + LANSendRequest_t, MPI_POINTER pLANSendRequest_t; + + +typedef struct _MSG_LAN_SEND_REPLY +{ + U16 Reserved; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved2; /* 04h */ + U8 NumberOfContexts; /* 05h */ + U8 PortNumber; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved3; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 BufferContext; /* 14h */ +} MSG_LAN_SEND_REPLY, MPI_POINTER PTR_MSG_LAN_SEND_REPLY, + LANSendReply_t, MPI_POINTER pLANSendReply_t; + + +/* LANReceivePost */ + +typedef struct _MSG_LAN_RECEIVE_POST_REQUEST +{ + U16 Reserved; /* 00h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 PortNumber; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 BucketCount; /* 0Ch */ + SGE_MPI_UNION SG_List[1]; /* 10h */ +} MSG_LAN_RECEIVE_POST_REQUEST, MPI_POINTER PTR_MSG_LAN_RECEIVE_POST_REQUEST, + LANReceivePostRequest_t, MPI_POINTER pLANReceivePostRequest_t; + + +typedef struct _MSG_LAN_RECEIVE_POST_REPLY +{ + U16 Reserved; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U8 Reserved2; /* 04h */ + U8 NumberOfContexts; /* 05h */ + U8 PortNumber; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved3; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 BucketsRemaining; /* 14h */ + U32 PacketOffset; /* 18h */ + U32 PacketLength; /* 1Ch */ + U32 BucketContext[1]; /* 20h */ +} MSG_LAN_RECEIVE_POST_REPLY, MPI_POINTER PTR_MSG_LAN_RECEIVE_POST_REPLY, + LANReceivePostReply_t, MPI_POINTER pLANReceivePostReply_t; + + +/* LANReset */ + +typedef struct _MSG_LAN_RESET_REQUEST +{ + U16 Reserved; /* 00h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 PortNumber; /* 05h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ +} MSG_LAN_RESET_REQUEST, MPI_POINTER PTR_MSG_LAN_RESET_REQUEST, + LANResetRequest_t, MPI_POINTER pLANResetRequest_t; + + +typedef struct _MSG_LAN_RESET_REPLY +{ + U16 Reserved; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 PortNumber; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved3; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_LAN_RESET_REPLY, MPI_POINTER PTR_MSG_LAN_RESET_REPLY, + LANResetReply_t, MPI_POINTER pLANResetReply_t; + + +/****************************************************************************/ +/* LAN Context Reply defines and macros */ +/****************************************************************************/ + +#define LAN_REPLY_PACKET_LENGTH_MASK (0x0000FFFF) +#define LAN_REPLY_PACKET_LENGTH_SHIFT (0) +#define LAN_REPLY_BUCKET_CONTEXT_MASK (0x07FF0000) +#define LAN_REPLY_BUCKET_CONTEXT_SHIFT (16) +#define LAN_REPLY_BUFFER_CONTEXT_MASK (0x07FFFFFF) +#define LAN_REPLY_BUFFER_CONTEXT_SHIFT (0) +#define LAN_REPLY_FORM_MASK (0x18000000) +#define LAN_REPLY_FORM_RECEIVE_SINGLE (0x00) +#define LAN_REPLY_FORM_RECEIVE_MULTIPLE (0x01) +#define LAN_REPLY_FORM_SEND_SINGLE (0x02) +#define LAN_REPLY_FORM_MESSAGE_CONTEXT (0x03) +#define LAN_REPLY_FORM_SHIFT (27) + +#define GET_LAN_PACKET_LENGTH(x) (((x) & LAN_REPLY_PACKET_LENGTH_MASK) \ + >> LAN_REPLY_PACKET_LENGTH_SHIFT) + +#define SET_LAN_PACKET_LENGTH(x, lth) \ + ((x) = ((x) & ~LAN_REPLY_PACKET_LENGTH_MASK) | \ + (((lth) << LAN_REPLY_PACKET_LENGTH_SHIFT) & \ + LAN_REPLY_PACKET_LENGTH_MASK)) + +#define GET_LAN_BUCKET_CONTEXT(x) (((x) & LAN_REPLY_BUCKET_CONTEXT_MASK) \ + >> LAN_REPLY_BUCKET_CONTEXT_SHIFT) + +#define SET_LAN_BUCKET_CONTEXT(x, ctx) \ + ((x) = ((x) & ~LAN_REPLY_BUCKET_CONTEXT_MASK) | \ + (((ctx) << LAN_REPLY_BUCKET_CONTEXT_SHIFT) & \ + LAN_REPLY_BUCKET_CONTEXT_MASK)) + +#define GET_LAN_BUFFER_CONTEXT(x) (((x) & LAN_REPLY_BUFFER_CONTEXT_MASK) \ + >> LAN_REPLY_BUFFER_CONTEXT_SHIFT) + +#define SET_LAN_BUFFER_CONTEXT(x, ctx) \ + ((x) = ((x) & ~LAN_REPLY_BUFFER_CONTEXT_MASK) | \ + (((ctx) << LAN_REPLY_BUFFER_CONTEXT_SHIFT) & \ + LAN_REPLY_BUFFER_CONTEXT_MASK)) + +#define GET_LAN_FORM(x) (((x) & LAN_REPLY_FORM_MASK) \ + >> LAN_REPLY_FORM_SHIFT) + +#define SET_LAN_FORM(x, frm) \ + ((x) = ((x) & ~LAN_REPLY_FORM_MASK) | \ + (((frm) << LAN_REPLY_FORM_SHIFT) & \ + LAN_REPLY_FORM_MASK)) + + +/****************************************************************************/ +/* LAN Current Device State defines */ +/****************************************************************************/ + +#define MPI_LAN_DEVICE_STATE_RESET (0x00) +#define MPI_LAN_DEVICE_STATE_OPERATIONAL (0x01) + + +/****************************************************************************/ +/* LAN Loopback defines */ +/****************************************************************************/ + +#define MPI_LAN_TX_MODES_ENABLE_LOOPBACK_SUPPRESSION (0x01) + +#endif + diff --git a/drivers/message/fusion/lsi/mpi_raid.h b/drivers/message/fusion/lsi/mpi_raid.h new file mode 100644 index 000000000000..9580a9de7fd2 --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_raid.h @@ -0,0 +1,232 @@ +/* + * Copyright (c) 2001-2003 LSI Logic Corporation. + * + * + * Name: mpi_raid.h + * Title: MPI RAID message and structures + * Creation Date: February 27, 2001 + * + * mpi_raid.h Version: 01.05.xx + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 02-27-01 01.01.01 Original release for this file. + * 03-27-01 01.01.02 Added structure offset comments. + * 08-08-01 01.02.01 Original release for v1.2 work. + * 09-28-01 01.02.02 Major rework for MPI v1.2 Integrated RAID changes. + * 10-04-01 01.02.03 Added ActionData defines for + * MPI_RAID_ACTION_DELETE_VOLUME action. + * 11-01-01 01.02.04 Added define for MPI_RAID_ACTION_ADATA_DO_NOT_SYNC. + * 03-14-02 01.02.05 Added define for MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT. + * 05-07-02 01.02.06 Added define for MPI_RAID_ACTION_ACTIVATE_VOLUME, + * MPI_RAID_ACTION_INACTIVATE_VOLUME, and + * MPI_RAID_ACTION_ADATA_INACTIVATE_ALL. + * 07-12-02 01.02.07 Added structures for Mailbox request and reply. + * 11-15-02 01.02.08 Added missing MsgContext field to MSG_MAILBOX_REQUEST. + * 04-01-03 01.02.09 New action data option flag for + * MPI_RAID_ACTION_DELETE_VOLUME. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_RAID_H +#define MPI_RAID_H + + +/****************************************************************************** +* +* R A I D M e s s a g e s +* +*******************************************************************************/ + + +/****************************************************************************/ +/* RAID Action Request */ +/****************************************************************************/ + +typedef struct _MSG_RAID_ACTION +{ + U8 Action; /* 00h */ + U8 Reserved1; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U8 VolumeID; /* 04h */ + U8 VolumeBus; /* 05h */ + U8 PhysDiskNum; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved2; /* 0Ch */ + U32 ActionDataWord; /* 10h */ + SGE_SIMPLE_UNION ActionDataSGE; /* 14h */ +} MSG_RAID_ACTION_REQUEST, MPI_POINTER PTR_MSG_RAID_ACTION_REQUEST, + MpiRaidActionRequest_t , MPI_POINTER pMpiRaidActionRequest_t; + + +/* RAID Action request Action values */ + +#define MPI_RAID_ACTION_STATUS (0x00) +#define MPI_RAID_ACTION_INDICATOR_STRUCT (0x01) +#define MPI_RAID_ACTION_CREATE_VOLUME (0x02) +#define MPI_RAID_ACTION_DELETE_VOLUME (0x03) +#define MPI_RAID_ACTION_DISABLE_VOLUME (0x04) +#define MPI_RAID_ACTION_ENABLE_VOLUME (0x05) +#define MPI_RAID_ACTION_QUIESCE_PHYS_IO (0x06) +#define MPI_RAID_ACTION_ENABLE_PHYS_IO (0x07) +#define MPI_RAID_ACTION_CHANGE_VOLUME_SETTINGS (0x08) +#define MPI_RAID_ACTION_PHYSDISK_OFFLINE (0x0A) +#define MPI_RAID_ACTION_PHYSDISK_ONLINE (0x0B) +#define MPI_RAID_ACTION_CHANGE_PHYSDISK_SETTINGS (0x0C) +#define MPI_RAID_ACTION_CREATE_PHYSDISK (0x0D) +#define MPI_RAID_ACTION_DELETE_PHYSDISK (0x0E) +#define MPI_RAID_ACTION_FAIL_PHYSDISK (0x0F) +#define MPI_RAID_ACTION_REPLACE_PHYSDISK (0x10) +#define MPI_RAID_ACTION_ACTIVATE_VOLUME (0x11) +#define MPI_RAID_ACTION_INACTIVATE_VOLUME (0x12) + +/* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */ +#define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC (0x00000001) +#define MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT (0x00000002) + +/* ActionDataWord defines for use with MPI_RAID_ACTION_DELETE_VOLUME action */ +#define MPI_RAID_ACTION_ADATA_KEEP_PHYS_DISKS (0x00000000) +#define MPI_RAID_ACTION_ADATA_DEL_PHYS_DISKS (0x00000001) + +#define MPI_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000) +#define MPI_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000002) + +/* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */ +#define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL (0x00000001) + + +/* RAID Action reply message */ + +typedef struct _MSG_RAID_ACTION_REPLY +{ + U8 Action; /* 00h */ + U8 Reserved; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U8 VolumeID; /* 04h */ + U8 VolumeBus; /* 05h */ + U8 PhysDiskNum; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 ActionStatus; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 VolumeStatus; /* 14h */ + U32 ActionData; /* 18h */ +} MSG_RAID_ACTION_REPLY, MPI_POINTER PTR_MSG_RAID_ACTION_REPLY, + MpiRaidActionReply_t, MPI_POINTER pMpiRaidActionReply_t; + + +/* RAID Volume reply ActionStatus values */ + +#define MPI_RAID_ACTION_ASTATUS_SUCCESS (0x0000) +#define MPI_RAID_ACTION_ASTATUS_INVALID_ACTION (0x0001) +#define MPI_RAID_ACTION_ASTATUS_FAILURE (0x0002) +#define MPI_RAID_ACTION_ASTATUS_IN_PROGRESS (0x0003) + + +/* RAID Volume reply RAID Volume Indicator structure */ + +typedef struct _MPI_RAID_VOL_INDICATOR +{ + U64 TotalBlocks; /* 00h */ + U64 BlocksRemaining; /* 08h */ +} MPI_RAID_VOL_INDICATOR, MPI_POINTER PTR_MPI_RAID_VOL_INDICATOR, + MpiRaidVolIndicator_t, MPI_POINTER pMpiRaidVolIndicator_t; + + +/****************************************************************************/ +/* SCSI IO RAID Passthrough Request */ +/****************************************************************************/ + +typedef struct _MSG_SCSI_IO_RAID_PT_REQUEST +{ + U8 PhysDiskNum; /* 00h */ + U8 Reserved1; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U8 CDBLength; /* 04h */ + U8 SenseBufferLength; /* 05h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 LUN[8]; /* 0Ch */ + U32 Control; /* 14h */ + U8 CDB[16]; /* 18h */ + U32 DataLength; /* 28h */ + U32 SenseBufferLowAddr; /* 2Ch */ + SGE_IO_UNION SGL; /* 30h */ +} MSG_SCSI_IO_RAID_PT_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_RAID_PT_REQUEST, + SCSIIORaidPassthroughRequest_t, MPI_POINTER pSCSIIORaidPassthroughRequest_t; + + +/* SCSI IO RAID Passthrough reply structure */ + +typedef struct _MSG_SCSI_IO_RAID_PT_REPLY +{ + U8 PhysDiskNum; /* 00h */ + U8 Reserved1; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U8 CDBLength; /* 04h */ + U8 SenseBufferLength; /* 05h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 SCSIStatus; /* 0Ch */ + U8 SCSIState; /* 0Dh */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 TransferCount; /* 14h */ + U32 SenseCount; /* 18h */ + U32 ResponseInfo; /* 1Ch */ +} MSG_SCSI_IO_RAID_PT_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_RAID_PT_REPLY, + SCSIIORaidPassthroughReply_t, MPI_POINTER pSCSIIORaidPassthroughReply_t; + + +/****************************************************************************/ +/* Mailbox reqeust structure */ +/****************************************************************************/ + +typedef struct _MSG_MAILBOX_REQUEST +{ + U16 Reserved1; + U8 ChainOffset; + U8 Function; + U16 Reserved2; + U8 Reserved3; + U8 MsgFlags; + U32 MsgContext; + U8 Command[10]; + U16 Reserved4; + SGE_IO_UNION SGL; +} MSG_MAILBOX_REQUEST, MPI_POINTER PTR_MSG_MAILBOX_REQUEST, + MailboxRequest_t, MPI_POINTER pMailboxRequest_t; + + +/* Mailbox reply structure */ +typedef struct _MSG_MAILBOX_REPLY +{ + U16 Reserved1; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 MailboxStatus; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 Reserved4; /* 14h */ +} MSG_MAILBOX_REPLY, MPI_POINTER PTR_MSG_MAILBOX_REPLY, + MailboxReply_t, MPI_POINTER pMailboxReply_t; + +#endif + + + diff --git a/drivers/message/fusion/lsi/mpi_sas.h b/drivers/message/fusion/lsi/mpi_sas.h new file mode 100644 index 000000000000..cb878f9c65de --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_sas.h @@ -0,0 +1,181 @@ +/* + * Copyright (c) 2003 LSI Logic Corporation. + * + * + * Name: mpi_sas.h + * Title: MPI Serial Attached SCSI structures and definitions + * Creation Date: April 23, 2003 + * + * mpi_sas.h Version: 01.05.xx + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * xx-yy-zz 01.05.01 Original release. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_SAS_H +#define MPI_SAS_H + +/***************************************************************************** +* +* S e r i a l A t t a c h e d S C S I M e s s a g e s +* +*****************************************************************************/ + +/****************************************************************************/ +/* Serial Management Protocol Passthrough Request */ +/****************************************************************************/ + +typedef struct _MSG_SMP_PASSTHROUGH_REQUEST +{ + U8 PassthroughFlags; /* 00h */ + U8 PhysicalPort; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 RequestDataLength; /* 04h */ + U8 ConnectionRate; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved1; /* 0Ch */ + U64 SASAddress; /* 10h */ + U32 Reserved2; /* 18h */ + U32 Reserved3; /* 1Ch */ + SGE_SIMPLE_UNION SGL; /* 20h */ +} MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST, + SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t; + +#define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) + +#define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) +#define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08) +#define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09) + + +/* Serial Management Protocol Passthrough Reply */ +typedef struct _MSG_SMP_PASSTHROUGH_REPLY +{ + U8 PassthroughFlags; /* 00h */ + U8 PhysicalPort; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 ResponseDataLength; /* 04h */ + U8 Reserved1; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 Reserved2; /* 0Ch */ + U8 SASStatus; /* 0Dh */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 Reserved3; /* 14h */ + U8 ResponseData[4]; /* 18h */ +} MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY, + SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t; + +#define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) + +/* values for the SASStatus field */ +#define MPI_SASSTATUS_SUCCESS (0x00) +#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01) +#define MPI_SASSTATUS_INVALID_FRAME (0x02) +#define MPI_SASSTATUS_UTC_BAD_DEST (0x03) +#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04) +#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) +#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) +#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) +#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) +#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09) +#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) +#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) +#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) +#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) +#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) +#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) +#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) +#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11) +#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12) +#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) +#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) + + +/* + * Values for the SAS DeviceInfo field used in SAS Device Status Change Event + * data and SAS IO Unit Configuration pages. + */ +#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) +#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) +#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) +#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) +#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200) +#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) +#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) +#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) +#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) +#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) +#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008) + +#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) +#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) +#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001) +#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) +#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) + + +/****************************************************************************/ +/* SAS IO Unit Control Request */ +/****************************************************************************/ + +typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST +{ + U8 Operation; /* 00h */ + U8 Reserved1; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 TargetID; /* 0Ch */ + U8 Bus; /* 0Dh */ + U8 PhyNum; /* 0Eh */ + U8 Reserved4; /* 0Fh */ + U32 Reserved5; /* 10h */ + U64 SASAddress; /* 14h */ + U32 Reserved6; /* 1Ch */ +} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST, + SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t; + +/* values for the ... field */ +#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01) +#define MPI_SAS_OP_CLEAR_ALL (0x02) +#define MPI_SAS_OP_MAP (0x03) +#define MPI_SAS_OP_MOVE (0x04) +#define MPI_SAS_OP_CLEAR (0x05) +#define MPI_SAS_OP_PHY_LINK_RESET (0x06) +#define MPI_SAS_OP_PHY_HARD_RESET (0x07) +#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) + + +/* SAS IO Unit Control Reply */ +typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY +{ + U8 Operation; /* 00h */ + U8 Reserved1; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved4; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY, + SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t; + +#endif + + diff --git a/drivers/message/fusion/lsi/mpi_targ.h b/drivers/message/fusion/lsi/mpi_targ.h new file mode 100644 index 000000000000..804dc85426c1 --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_targ.h @@ -0,0 +1,435 @@ +/* + * Copyright (c) 2000-2003 LSI Logic Corporation. + * + * + * Name: mpi_targ.h + * Title: MPI Target mode messages and structures + * Creation Date: June 22, 2000 + * + * mpi_targ.h Version: 01.05.xx + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 06-06-00 01.00.01 Update version number for 1.0 release. + * 06-22-00 01.00.02 Added _MSG_TARGET_CMD_BUFFER_POST_REPLY structure. + * Corrected DECSRIPTOR typo to DESCRIPTOR. + * 11-02-00 01.01.01 Original release for post 1.0 work + * Modified target mode to use IoIndex instead of + * HostIndex and IocIndex. Added Alias. + * 01-09-01 01.01.02 Added defines for TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER + * and TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER. + * 02-20-01 01.01.03 Started using MPI_POINTER. + * Added structures for MPI_TARGET_SCSI_SPI_CMD_BUFFER and + * MPI_TARGET_FCP_CMD_BUFFER. + * 03-27-01 01.01.04 Added structure offset comments. + * 08-08-01 01.02.01 Original release for v1.2 work. + * 09-28-01 01.02.02 Added structure for MPI_TARGET_SCSI_SPI_STATUS_IU. + * Added PriorityReason field to some replies and + * defined more PriorityReason codes. + * Added some defines for to support previous version + * of MPI. + * 10-04-01 01.02.03 Added PriorityReason to MSG_TARGET_ERROR_REPLY. + * 11-01-01 01.02.04 Added define for TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY. + * 03-14-02 01.02.05 Modified MPI_TARGET_FCP_RSP_BUFFER to get the proper + * byte ordering. + * 05-31-02 01.02.06 Modified TARGET_MODE_REPLY_ALIAS_MASK to only include + * one bit. + * Added AliasIndex field to MPI_TARGET_FCP_CMD_BUFFER. + * 09-16-02 01.02.07 Added flags for confirmed completion. + * Added PRIORITY_REASON_TARGET_BUSY. + * 11-15-02 01.02.08 Added AliasID field to MPI_TARGET_SCSI_SPI_CMD_BUFFER. + * 04-01-03 01.02.09 Added OptionalOxid field to MPI_TARGET_FCP_CMD_BUFFER. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_TARG_H +#define MPI_TARG_H + + +/****************************************************************************** +* +* S C S I T a r g e t M e s s a g e s +* +*******************************************************************************/ + +typedef struct _CMD_BUFFER_DESCRIPTOR +{ + U16 IoIndex; /* 00h */ + U16 Reserved; /* 02h */ + union /* 04h */ + { + U32 PhysicalAddress32; + U64 PhysicalAddress64; + } u; +} CMD_BUFFER_DESCRIPTOR, MPI_POINTER PTR_CMD_BUFFER_DESCRIPTOR, + CmdBufferDescriptor_t, MPI_POINTER pCmdBufferDescriptor_t; + + +/****************************************************************************/ +/* Target Command Buffer Post Request */ +/****************************************************************************/ + +typedef struct _MSG_TARGET_CMD_BUFFER_POST_REQUEST +{ + U8 BufferPostFlags; /* 00h */ + U8 BufferCount; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U8 BufferLength; /* 04h */ + U8 Reserved; /* 05h */ + U8 Reserved1; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + CMD_BUFFER_DESCRIPTOR Buffer[1]; /* 0Ch */ +} MSG_TARGET_CMD_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_REQUEST, + TargetCmdBufferPostRequest_t, MPI_POINTER pTargetCmdBufferPostRequest_t; + +#define CMD_BUFFER_POST_FLAGS_PORT_MASK (0x01) +#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_MASK (0x80) +#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_32 (0) +#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_64 (1) +#define CMD_BUFFER_POST_FLAGS_64_BIT_ADDR (0x80) + +#define CMD_BUFFER_POST_IO_INDEX_MASK (0x00003FFF) +#define CMD_BUFFER_POST_IO_INDEX_MASK_0100 (0x000003FF) /* obsolete */ + + +typedef struct _MSG_TARGET_CMD_BUFFER_POST_REPLY +{ + U8 BufferPostFlags; /* 00h */ + U8 BufferCount; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U8 BufferLength; /* 04h */ + U8 Reserved; /* 05h */ + U8 Reserved1; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved2; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_TARGET_CMD_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_REPLY, + TargetCmdBufferPostReply_t, MPI_POINTER pTargetCmdBufferPostReply_t; + +/* the following structure is obsolete as of MPI v1.2 */ +typedef struct _MSG_PRIORITY_CMD_RECEIVED_REPLY +{ + U16 Reserved; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 PriorityReason; /* 0Ch */ + U8 Reserved3; /* 0Dh */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 ReplyWord; /* 14h */ +} MSG_PRIORITY_CMD_RECEIVED_REPLY, MPI_POINTER PTR_MSG_PRIORITY_CMD_RECEIVED_REPLY, + PriorityCommandReceivedReply_t, MPI_POINTER pPriorityCommandReceivedReply_t; + +#define PRIORITY_REASON_NO_DISCONNECT (0x00) +#define PRIORITY_REASON_SCSI_TASK_MANAGEMENT (0x01) +#define PRIORITY_REASON_CMD_PARITY_ERR (0x02) +#define PRIORITY_REASON_MSG_OUT_PARITY_ERR (0x03) +#define PRIORITY_REASON_LQ_CRC_ERR (0x04) +#define PRIORITY_REASON_CMD_CRC_ERR (0x05) +#define PRIORITY_REASON_PROTOCOL_ERR (0x06) +#define PRIORITY_REASON_DATA_OUT_PARITY_ERR (0x07) +#define PRIORITY_REASON_DATA_OUT_CRC_ERR (0x08) +#define PRIORITY_REASON_TARGET_BUSY (0x09) +#define PRIORITY_REASON_UNKNOWN (0xFF) + + +typedef struct _MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY +{ + U16 Reserved; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 PriorityReason; /* 0Ch */ + U8 Reserved3; /* 0Dh */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 ReplyWord; /* 14h */ +} MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY, + MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY, + TargetCmdBufferPostErrorReply_t, MPI_POINTER pTargetCmdBufferPostErrorReply_t; + + +typedef struct _MPI_TARGET_FCP_CMD_BUFFER +{ + U8 FcpLun[8]; /* 00h */ + U8 FcpCntl[4]; /* 08h */ + U8 FcpCdb[16]; /* 0Ch */ + U32 FcpDl; /* 1Ch */ + U8 AliasIndex; /* 20h */ + U8 Reserved1; /* 21h */ + U16 OptionalOxid; /* 22h */ +} MPI_TARGET_FCP_CMD_BUFFER, MPI_POINTER PTR_MPI_TARGET_FCP_CMD_BUFFER, + MpiTargetFcpCmdBuffer, MPI_POINTER pMpiTargetFcpCmdBuffer; + + +typedef struct _MPI_TARGET_SCSI_SPI_CMD_BUFFER +{ + /* SPI L_Q information unit */ + U8 L_QType; /* 00h */ + U8 Reserved; /* 01h */ + U16 Tag; /* 02h */ + U8 LogicalUnitNumber[8]; /* 04h */ + U32 DataLength; /* 0Ch */ + /* SPI command information unit */ + U8 ReservedFirstByteOfCommandIU; /* 10h */ + U8 TaskAttribute; /* 11h */ + U8 TaskManagementFlags; /* 12h */ + U8 AdditionalCDBLength; /* 13h */ + U8 CDB[16]; /* 14h */ + /* Alias ID */ + U8 AliasID; /* 24h */ + U8 Reserved1; /* 25h */ + U16 Reserved2; /* 26h */ +} MPI_TARGET_SCSI_SPI_CMD_BUFFER, + MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER, + MpiTargetScsiSpiCmdBuffer, MPI_POINTER pMpiTargetScsiSpiCmdBuffer; + + +/****************************************************************************/ +/* Target Assist Request */ +/****************************************************************************/ + +typedef struct _MSG_TARGET_ASSIST_REQUEST +{ + U8 StatusCode; /* 00h */ + U8 TargetAssistFlags; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 QueueTag; /* 04h */ + U8 Reserved; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 ReplyWord; /* 0Ch */ + U8 LUN[8]; /* 10h */ + U32 RelativeOffset; /* 18h */ + U32 DataLength; /* 1Ch */ + SGE_IO_UNION SGL[1]; /* 20h */ +} MSG_TARGET_ASSIST_REQUEST, MPI_POINTER PTR_MSG_TARGET_ASSIST_REQUEST, + TargetAssistRequest_t, MPI_POINTER pTargetAssistRequest_t; + +#define TARGET_ASSIST_FLAGS_DATA_DIRECTION (0x01) +#define TARGET_ASSIST_FLAGS_AUTO_STATUS (0x02) +#define TARGET_ASSIST_FLAGS_HIGH_PRIORITY (0x04) +#define TARGET_ASSIST_FLAGS_CONFIRMED (0x08) +#define TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER (0x80) + + +typedef struct _MSG_TARGET_ERROR_REPLY +{ + U16 Reserved; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 PriorityReason; /* 0Ch */ + U8 Reserved3; /* 0Dh */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 ReplyWord; /* 14h */ + U32 TransferCount; /* 18h */ +} MSG_TARGET_ERROR_REPLY, MPI_POINTER PTR_MSG_TARGET_ERROR_REPLY, + TargetErrorReply_t, MPI_POINTER pTargetErrorReply_t; + + +/****************************************************************************/ +/* Target Status Send Request */ +/****************************************************************************/ + +typedef struct _MSG_TARGET_STATUS_SEND_REQUEST +{ + U8 StatusCode; /* 00h */ + U8 StatusFlags; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 QueueTag; /* 04h */ + U8 Reserved; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 ReplyWord; /* 0Ch */ + U8 LUN[8]; /* 10h */ + SGE_SIMPLE_UNION StatusDataSGE; /* 18h */ +} MSG_TARGET_STATUS_SEND_REQUEST, MPI_POINTER PTR_MSG_TARGET_STATUS_SEND_REQUEST, + TargetStatusSendRequest_t, MPI_POINTER pTargetStatusSendRequest_t; + +#define TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS (0x01) +#define TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY (0x04) +#define TARGET_STATUS_SEND_FLAGS_CONFIRMED (0x08) +#define TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER (0x80) + +/* + * NOTE: FCP_RSP data is big-endian. When used on a little-endian system, this + * structure properly orders the bytes. + */ +typedef struct _MPI_TARGET_FCP_RSP_BUFFER +{ + U8 Reserved0[8]; /* 00h */ + U8 Reserved1[2]; /* 08h */ + U8 FcpFlags; /* 0Ah */ + U8 FcpStatus; /* 0Bh */ + U32 FcpResid; /* 0Ch */ + U32 FcpSenseLength; /* 10h */ + U32 FcpResponseLength; /* 14h */ + U8 FcpResponseData[8]; /* 18h */ + U8 FcpSenseData[32]; /* Pad to 64 bytes */ /* 20h */ +} MPI_TARGET_FCP_RSP_BUFFER, MPI_POINTER PTR_MPI_TARGET_FCP_RSP_BUFFER, + MpiTargetFcpRspBuffer, MPI_POINTER pMpiTargetFcpRspBuffer; + +/* + * NOTE: The SPI status IU is big-endian. When used on a little-endian system, + * this structure properly orders the bytes. + */ +typedef struct _MPI_TARGET_SCSI_SPI_STATUS_IU +{ + U8 Reserved0; /* 00h */ + U8 Reserved1; /* 01h */ + U8 Valid; /* 02h */ + U8 Status; /* 03h */ + U32 SenseDataListLength; /* 04h */ + U32 PktFailuresListLength; /* 08h */ + U8 SenseData[52]; /* Pad the IU to 64 bytes */ /* 0Ch */ +} MPI_TARGET_SCSI_SPI_STATUS_IU, MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_STATUS_IU, + TargetScsiSpiStatusIU_t, MPI_POINTER pTargetScsiSpiStatusIU_t; + +/****************************************************************************/ +/* Target Mode Abort Request */ +/****************************************************************************/ + +typedef struct _MSG_TARGET_MODE_ABORT_REQUEST +{ + U8 AbortType; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 ReplyWord; /* 0Ch */ + U32 MsgContextToAbort; /* 10h */ +} MSG_TARGET_MODE_ABORT, MPI_POINTER PTR_MSG_TARGET_MODE_ABORT, + TargetModeAbort_t, MPI_POINTER pTargetModeAbort_t; + +#define TARGET_MODE_ABORT_TYPE_ALL_CMD_BUFFERS (0x00) +#define TARGET_MODE_ABORT_TYPE_ALL_IO (0x01) +#define TARGET_MODE_ABORT_TYPE_EXACT_IO (0x02) +#define TARGET_MODE_ABORT_TYPE_EXACT_IO_REQUEST (0x03) + +/* Target Mode Abort Reply */ + +typedef struct _MSG_TARGET_MODE_ABORT_REPLY +{ + U16 Reserved; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved3; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 AbortCount; /* 14h */ +} MSG_TARGET_MODE_ABORT_REPLY, MPI_POINTER PTR_MSG_TARGET_MODE_ABORT_REPLY, + TargetModeAbortReply_t, MPI_POINTER pTargetModeAbortReply_t; + + +/****************************************************************************/ +/* Target Mode Context Reply */ +/****************************************************************************/ + +#define TARGET_MODE_REPLY_IO_INDEX_MASK (0x00003FFF) +#define TARGET_MODE_REPLY_IO_INDEX_SHIFT (0) +#define TARGET_MODE_REPLY_INITIATOR_INDEX_MASK (0x03FFC000) +#define TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT (14) +#define TARGET_MODE_REPLY_ALIAS_MASK (0x04000000) +#define TARGET_MODE_REPLY_ALIAS_SHIFT (26) +#define TARGET_MODE_REPLY_PORT_MASK (0x10000000) +#define TARGET_MODE_REPLY_PORT_SHIFT (28) + + +#define GET_IO_INDEX(x) (((x) & TARGET_MODE_REPLY_IO_INDEX_MASK) \ + >> TARGET_MODE_REPLY_IO_INDEX_SHIFT) + +#define SET_IO_INDEX(t, i) \ + ((t) = ((t) & ~TARGET_MODE_REPLY_IO_INDEX_MASK) | \ + (((i) << TARGET_MODE_REPLY_IO_INDEX_SHIFT) & \ + TARGET_MODE_REPLY_IO_INDEX_MASK)) + +#define GET_INITIATOR_INDEX(x) (((x) & TARGET_MODE_REPLY_INITIATOR_INDEX_MASK) \ + >> TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT) + +#define SET_INITIATOR_INDEX(t, ii) \ + ((t) = ((t) & ~TARGET_MODE_REPLY_INITIATOR_INDEX_MASK) | \ + (((ii) << TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT) & \ + TARGET_MODE_REPLY_INITIATOR_INDEX_MASK)) + +#define GET_ALIAS(x) (((x) & TARGET_MODE_REPLY_ALIAS_MASK) \ + >> TARGET_MODE_REPLY_ALIAS_SHIFT) + +#define SET_ALIAS(t, a) ((t) = ((t) & ~TARGET_MODE_REPLY_ALIAS_MASK) | \ + (((a) << TARGET_MODE_REPLY_ALIAS_SHIFT) & \ + TARGET_MODE_REPLY_ALIAS_MASK)) + +#define GET_PORT(x) (((x) & TARGET_MODE_REPLY_PORT_MASK) \ + >> TARGET_MODE_REPLY_PORT_SHIFT) + +#define SET_PORT(t, p) ((t) = ((t) & ~TARGET_MODE_REPLY_PORT_MASK) | \ + (((p) << TARGET_MODE_REPLY_PORT_SHIFT) & \ + TARGET_MODE_REPLY_PORT_MASK)) + +/* the following obsolete values are for MPI v1.0 support */ +#define TARGET_MODE_REPLY_0100_MASK_HOST_INDEX (0x000003FF) +#define TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX (0) +#define TARGET_MODE_REPLY_0100_MASK_IOC_INDEX (0x001FF800) +#define TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX (11) +#define TARGET_MODE_REPLY_0100_PORT_MASK (0x00400000) +#define TARGET_MODE_REPLY_0100_PORT_SHIFT (22) +#define TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX (0x1F800000) +#define TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX (23) + +#define GET_HOST_INDEX_0100(x) (((x) & TARGET_MODE_REPLY_0100_MASK_HOST_INDEX) \ + >> TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX) + +#define SET_HOST_INDEX_0100(t, hi) \ + ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_HOST_INDEX) | \ + (((hi) << TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX) & \ + TARGET_MODE_REPLY_0100_MASK_HOST_INDEX)) + +#define GET_IOC_INDEX_0100(x) (((x) & TARGET_MODE_REPLY_0100_MASK_IOC_INDEX) \ + >> TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX) + +#define SET_IOC_INDEX_0100(t, ii) \ + ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_IOC_INDEX) | \ + (((ii) << TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX) & \ + TARGET_MODE_REPLY_0100_MASK_IOC_INDEX)) + +#define GET_INITIATOR_INDEX_0100(x) \ + (((x) & TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX) \ + >> TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX) + +#define SET_INITIATOR_INDEX_0100(t, ii) \ + ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX) | \ + (((ii) << TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX) & \ + TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX)) + + +#endif + diff --git a/drivers/message/fusion/lsi/mpi_tool.h b/drivers/message/fusion/lsi/mpi_tool.h new file mode 100644 index 000000000000..536d197c4142 --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_tool.h @@ -0,0 +1,305 @@ +/* + * Copyright (c) 2001-2003 LSI Logic Corporation. + * + * + * Name: mpi_tool.h + * Title: MPI Toolbox structures and definitions + * Creation Date: July 30, 2001 + * + * mpi_tool.h Version: 01.05.xx + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 08-08-01 01.02.01 Original release. + * 08-29-01 01.02.02 Added DIAG_DATA_UPLOAD_HEADER and related defines. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_TOOL_H +#define MPI_TOOL_H + +#define MPI_TOOLBOX_CLEAN_TOOL (0x00) +#define MPI_TOOLBOX_MEMORY_MOVE_TOOL (0x01) +#define MPI_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02) +#define MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03) +#define MPI_TOOLBOX_FC_MANAGEMENT_TOOL (0x04) + + +/****************************************************************************/ +/* Toolbox reply */ +/****************************************************************************/ + +typedef struct _MSG_TOOLBOX_REPLY +{ + U8 Tool; /* 00h */ + U8 Reserved; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved3; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_TOOLBOX_REPLY, MPI_POINTER PTR_MSG_TOOLBOX_REPLY, + ToolboxReply_t, MPI_POINTER pToolboxReply_t; + + +/****************************************************************************/ +/* Toolbox Clean Tool request */ +/****************************************************************************/ + +typedef struct _MSG_TOOLBOX_CLEAN_REQUEST +{ + U8 Tool; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Flags; /* 0Ch */ +} MSG_TOOLBOX_CLEAN_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_CLEAN_REQUEST, + ToolboxCleanRequest_t, MPI_POINTER pToolboxCleanRequest_t; + +#define MPI_TOOLBOX_CLEAN_NVSRAM (0x00000001) +#define MPI_TOOLBOX_CLEAN_SEEPROM (0x00000002) +#define MPI_TOOLBOX_CLEAN_FLASH (0x00000004) +#define MPI_TOOLBOX_CLEAN_BOOTLOADER (0x04000000) +#define MPI_TOOLBOX_CLEAN_FW_BACKUP (0x08000000) +#define MPI_TOOLBOX_CLEAN_FW_CURRENT (0x10000000) +#define MPI_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000) +#define MPI_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000) +#define MPI_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000) + + +/****************************************************************************/ +/* Toolbox Memory Move request */ +/****************************************************************************/ + +typedef struct _MSG_TOOLBOX_MEM_MOVE_REQUEST +{ + U8 Tool; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + SGE_SIMPLE_UNION SGL; /* 0Ch */ +} MSG_TOOLBOX_MEM_MOVE_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_MEM_MOVE_REQUEST, + ToolboxMemMoveRequest_t, MPI_POINTER pToolboxMemMoveRequest_t; + + +/****************************************************************************/ +/* Toolbox Diagnostic Data Upload request */ +/****************************************************************************/ + +typedef struct _MSG_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST +{ + U8 Tool; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Flags; /* 0Ch */ + U32 Reserved3; /* 10h */ + SGE_SIMPLE_UNION SGL; /* 14h */ +} MSG_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST, + ToolboxDiagDataUploadRequest_t, MPI_POINTER pToolboxDiagDataUploadRequest_t; + +typedef struct _DIAG_DATA_UPLOAD_HEADER +{ + U32 DiagDataLength; /* 00h */ + U8 FormatCode; /* 04h */ + U8 Reserved; /* 05h */ + U16 Reserved1; /* 06h */ +} DIAG_DATA_UPLOAD_HEADER, MPI_POINTER PTR_DIAG_DATA_UPLOAD_HEADER, + DiagDataUploadHeader_t, MPI_POINTER pDiagDataUploadHeader_t; + +#define MPI_TB_DIAG_FORMAT_SCSI_PRINTF_1 (0x01) +#define MPI_TB_DIAG_FORMAT_SCSI_2 (0x02) +#define MPI_TB_DIAG_FORMAT_SCSI_3 (0x03) +#define MPI_TB_DIAG_FORMAT_FC_TRACE_1 (0x04) + + +/****************************************************************************/ +/* Toolbox ISTWI Read Write request */ +/****************************************************************************/ + +typedef struct _MSG_TOOLBOX_ISTWI_READ_WRITE_REQUEST +{ + U8 Tool; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 Flags; /* 0Ch */ + U8 BusNum; /* 0Dh */ + U16 Reserved3; /* 0Eh */ + U8 NumAddressBytes; /* 10h */ + U8 Reserved4; /* 11h */ + U16 DataLength; /* 12h */ + U8 DeviceAddr; /* 14h */ + U8 Addr1; /* 15h */ + U8 Addr2; /* 16h */ + U8 Addr3; /* 17h */ + U32 Reserved5; /* 18h */ + SGE_SIMPLE_UNION SGL; /* 1Ch */ +} MSG_TOOLBOX_ISTWI_READ_WRITE_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_ISTWI_READ_WRITE_REQUEST, + ToolboxIstwiReadWriteRequest_t, MPI_POINTER pToolboxIstwiReadWriteRequest_t; + +#define MPI_TB_ISTWI_FLAGS_WRITE (0x00) +#define MPI_TB_ISTWI_FLAGS_READ (0x01) + + +/****************************************************************************/ +/* Toolbox FC Management request */ +/****************************************************************************/ + +/* ActionInfo for Bus and TargetId */ +typedef struct _MPI_TB_FC_MANAGE_BUS_TID_AI +{ + U16 Reserved; /* 00h */ + U8 Bus; /* 02h */ + U8 TargetId; /* 03h */ +} MPI_TB_FC_MANAGE_BUS_TID_AI, MPI_POINTER PTR_MPI_TB_FC_MANAGE_BUS_TID_AI, + MpiTbFcManageBusTidAi_t, MPI_POINTER pMpiTbFcManageBusTidAi_t; + +/* ActionInfo for port identifier */ +typedef struct _MPI_TB_FC_MANAGE_PID_AI +{ + U32 PortIdentifier; /* 00h */ +} MPI_TB_FC_MANAGE_PID_AI, MPI_POINTER PTR_MPI_TB_FC_MANAGE_PID_AI, + MpiTbFcManagePidAi_t, MPI_POINTER pMpiTbFcManagePidAi_t; + +/* union of ActionInfo */ +typedef union _MPI_TB_FC_MANAGE_AI_UNION +{ + MPI_TB_FC_MANAGE_BUS_TID_AI BusTid; + MPI_TB_FC_MANAGE_PID_AI Port; +} MPI_TB_FC_MANAGE_AI_UNION, MPI_POINTER PTR_MPI_TB_FC_MANAGE_AI_UNION, + MpiTbFcManageAiUnion_t, MPI_POINTER pMpiTbFcManageAiUnion_t; + +typedef struct _MSG_TOOLBOX_FC_MANAGE_REQUEST +{ + U8 Tool; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 Action; /* 0Ch */ + U8 Reserved3; /* 0Dh */ + U16 Reserved4; /* 0Eh */ + MPI_TB_FC_MANAGE_AI_UNION ActionInfo; /* 10h */ +} MSG_TOOLBOX_FC_MANAGE_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_FC_MANAGE_REQUEST, + ToolboxFcManageRequest_t, MPI_POINTER pToolboxFcManageRequest_t; + +/* defines for the Action field */ +#define MPI_TB_FC_MANAGE_ACTION_DISC_ALL (0x00) +#define MPI_TB_FC_MANAGE_ACTION_DISC_PID (0x01) +#define MPI_TB_FC_MANAGE_ACTION_DISC_BUS_TID (0x02) + + +/****************************************************************************/ +/* Diagnostic Buffer Post request */ +/****************************************************************************/ + +typedef struct _MSG_DIAG_BUFFER_POST_REQUEST +{ + U8 TraceLevel; /* 00h */ + U8 BufferType; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 ExtendedType; /* 0Ch */ + U32 BufferLength; /* 10h */ + U32 ProductSpecific[4]; /* 14h */ + U32 Reserved3; /* 18h */ + SGE_SIMPLE_UNION SGL; /* 28h */ +} MSG_DIAG_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_DIAG_BUFFER_POST_REQUEST, + DiagBufferPostRequest_t, MPI_POINTER pDiagBufferPostRequest_t; + +#define MPI_DIAG_BUF_TYPE_TRACE (0x00) +#define MPI_DIAG_BUF_TYPE_SNAPSHOT (0x01) +#define MPI_DIAG_BUF_TYPE_EXTENDED (0x02) + +#define MPI_DIAG_EXTENDED_QTAG (0x00000001) + + +/* Diagnostic Buffer Post reply */ +typedef struct _MSG_DIAG_BUFFER_POST_REPLY +{ + U8 Reserved1; /* 00h */ + U8 BufferType; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved4; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 TransferLength; /* 14h */ +} MSG_DIAG_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_DIAG_BUFFER_POST_REPLY, + DiagBufferPostReply_t, MPI_POINTER pDiagBufferPostReply_t; + + +/****************************************************************************/ +/* Diagnostic Release request */ +/****************************************************************************/ + +typedef struct _MSG_DIAG_RELEASE_REQUEST +{ + U8 Reserved1; /* 00h */ + U8 BufferType; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ +} MSG_DIAG_RELEASE_REQUEST, MPI_POINTER PTR_MSG_DIAG_RELEASE_REQUEST, + DiagReleaseRequest_t, MPI_POINTER pDiagReleaseRequest_t; + + +/* Diagnostic Release reply */ +typedef struct _MSG_DIAG_RELEASE_REPLY +{ + U8 Reserved1; /* 00h */ + U8 BufferType; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved2; /* 04h */ + U8 Reserved3; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U16 Reserved4; /* 0Ch */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ +} MSG_DIAG_RELEASE_REPLY, MPI_POINTER PTR_MSG_DIAG_RELEASE_REPLY, + DiagReleaseReply_t, MPI_POINTER pDiagReleaseReply_t; + + +#endif + + diff --git a/drivers/message/fusion/lsi/mpi_type.h b/drivers/message/fusion/lsi/mpi_type.h new file mode 100644 index 000000000000..239328a7689c --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_type.h @@ -0,0 +1,86 @@ +/* + * Copyright (c) 2000-2003 LSI Logic Corporation. + * + * + * Name: mpi_type.h + * Title: MPI Basic type definitions + * Creation Date: June 6, 2000 + * + * mpi_type.h Version: 01.05.xx + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. + * 06-06-00 01.00.01 Update version number for 1.0 release. + * 11-02-00 01.01.01 Original release for post 1.0 work + * 02-20-01 01.01.02 Added define and ifdef for MPI_POINTER. + * 08-08-01 01.02.01 Original release for v1.2 work. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI_TYPE_H +#define MPI_TYPE_H + + +/******************************************************************************* + * Define MPI_POINTER if it hasn't already been defined. By default MPI_POINTER + * is defined to be a near pointer. MPI_POINTER can be defined as a far pointer + * by defining MPI_POINTER as "far *" before this header file is included. + */ +#ifndef MPI_POINTER +#define MPI_POINTER * +#endif + + +/***************************************************************************** +* +* B a s i c T y p e s +* +*****************************************************************************/ + +typedef signed char S8; +typedef unsigned char U8; +typedef signed short S16; +typedef unsigned short U16; + + +typedef int32_t S32; +typedef u_int32_t U32; + +/* + * The only way crap below could work on big-endian boxen would be if it + * wasn't used at all. + */ + +typedef struct _S64 +{ + U32 Low; + S32 High; +} S64; + +typedef struct _U64 +{ + U32 Low; + U32 High; +} U64; + + +/****************************************************************************/ +/* Pointers */ +/****************************************************************************/ + +typedef S8 *PS8; +typedef U8 *PU8; +typedef S16 *PS16; +typedef U16 *PU16; +typedef S32 *PS32; +typedef U32 *PU32; +typedef S64 *PS64; +typedef U64 *PU64; + + +#endif + diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c new file mode 100644 index 000000000000..942cc1c2a186 --- /dev/null +++ b/drivers/message/fusion/mptbase.c @@ -0,0 +1,5946 @@ +/* + * linux/drivers/message/fusion/mptbase.c + * High performance SCSI + LAN / Fibre Channel device drivers. + * This is the Fusion MPT base driver which supports multiple + * (SCSI + LAN) specialized protocol drivers. + * For use with PCI chip/adapter(s): + * LSIFC9xx/LSI409xx Fibre Channel + * running LSI Logic Fusion MPT (Message Passing Technology) firmware. + * + * Credits: + * There are lots of people not mentioned below that deserve credit + * and thanks but won't get it here - sorry in advance that you + * got overlooked. + * + * This driver would not exist if not for Alan Cox's development + * of the linux i2o driver. + * + * A special thanks to Noah Romer (LSI Logic) for tons of work + * and tough debugging on the LAN driver, especially early on;-) + * And to Roger Hickerson (LSI Logic) for tirelessly supporting + * this driver project. + * + * A special thanks to Pamela Delaney (LSI Logic) for tons of work + * and countless enhancements while adding support for the 1030 + * chip family. Pam has been instrumental in the development of + * of the 2.xx.xx series fusion drivers, and her contributions are + * far too numerous to hope to list in one place. + * + * All manner of help from Stephen Shirron (LSI Logic): + * low-level FC analysis, debug + various fixes in FCxx firmware, + * initial port to alpha platform, various driver code optimizations, + * being a faithful sounding board on all sorts of issues & ideas, + * etc. + * + * A huge debt of gratitude is owed to David S. Miller (DaveM) + * for fixing much of the stupid and broken stuff in the early + * driver while porting to sparc64 platform. THANK YOU! + * + * Special thanks goes to the I2O LAN driver people at the + * University of Helsinki, who, unbeknownst to them, provided + * the inspiration and initial structure for this driver. + * + * A really huge debt of gratitude is owed to Eddie C. Dost + * for gobs of hard work fixing and optimizing LAN code. + * THANK YOU! + * + * Copyright (c) 1999-2004 LSI Logic Corporation + * Originally By: Steven J. Ralston + * (mailto:sjralston1@netscape.net) + * (mailto:mpt_linux_developer@lsil.com) + * + * $Id: mptbase.c,v 1.126 2002/12/16 15:28:45 pdelaney Exp $ + */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + NO WARRANTY + THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + solely responsible for determining the appropriateness of using and + distributing the Program and assumes all risks associated with its + exercise of rights under this Agreement, including but not limited to + the risks and costs of program errors, damage to or loss of data, + programs or equipment, and unavailability or interruption of operations. + + DISCLAIMER OF LIABILITY + NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +#include <linux/config.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> /* needed for in_interrupt() proto */ +#include <asm/io.h> +#ifdef CONFIG_MTRR +#include <asm/mtrr.h> +#endif +#ifdef __sparc__ +#include <asm/irq.h> /* needed for __irq_itoa() proto */ +#endif + +#include "mptbase.h" + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +#define my_NAME "Fusion MPT base driver" +#define my_VERSION MPT_LINUX_VERSION_COMMON +#define MYNAM "mptbase" + +MODULE_AUTHOR(MODULEAUTHOR); +MODULE_DESCRIPTION(my_NAME); +MODULE_LICENSE("GPL"); + +/* + * cmd line parameters + */ +#ifdef MFCNT +static int mfcounter = 0; +#define PRINT_MF_COUNT 20000 +#endif + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Public data... + */ +int mpt_lan_index = -1; +int mpt_stm_index = -1; + +struct proc_dir_entry *mpt_proc_root_dir; + +#define WHOINIT_UNKNOWN 0xAA + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Private data... + */ + /* Adapter link list */ +LIST_HEAD(ioc_list); + /* Callback lookup table */ +static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS]; + /* Protocol driver class lookup table */ +static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS]; + /* Event handler lookup table */ +static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS]; + /* Reset handler lookup table */ +static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS]; +static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS]; + +static int mpt_base_index = -1; +static int last_drv_idx = -1; + +static DECLARE_WAIT_QUEUE_HEAD(mpt_waitq); + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Forward protos... + */ +static irqreturn_t mpt_interrupt(int irq, void *bus_id, struct pt_regs *r); +static int mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply); +static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, + u32 *req, int replyBytes, u16 *u16reply, int maxwait, + int sleepFlag); +static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag); +static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev); +static void mpt_adapter_disable(MPT_ADAPTER *ioc); +static void mpt_adapter_dispose(MPT_ADAPTER *ioc); + +static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc); +static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag); +//static u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked); +static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason); +static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag); +static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag); +static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag); +static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag); +static int mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag); +static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag); +static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag); +static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag); +static int PrimeIocFifos(MPT_ADAPTER *ioc); +static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag); +static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag); +static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag); +static int GetLanConfigPages(MPT_ADAPTER *ioc); +static int GetFcPortPage0(MPT_ADAPTER *ioc, int portnum); +static int GetIoUnitPage2(MPT_ADAPTER *ioc); +static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum); +static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum); +static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc); +static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc); +static void mpt_timer_expired(unsigned long data); +static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch); +static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp); + +#ifdef CONFIG_PROC_FS +static int procmpt_summary_read(char *buf, char **start, off_t offset, + int request, int *eof, void *data); +static int procmpt_version_read(char *buf, char **start, off_t offset, + int request, int *eof, void *data); +static int procmpt_iocinfo_read(char *buf, char **start, off_t offset, + int request, int *eof, void *data); +#endif +static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc); + +//int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag); +static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers); +static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); +static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info); +static void mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info); + +/* module entry point */ +static int __devinit mptbase_probe (struct pci_dev *, const struct pci_device_id *); +static void __devexit mptbase_remove(struct pci_dev *); +static void mptbase_shutdown(struct device * ); +static int __init fusion_init (void); +static void __exit fusion_exit (void); + +/**************************************************************************** + * Supported hardware + */ + +static struct pci_device_id mptbase_pci_table[] = { + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC909, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929X, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919X, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_1030_53C1035, + PCI_ANY_ID, PCI_ANY_ID }, + {0} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(pci, mptbase_pci_table); + +#define CHIPREG_READ32(addr) readl_relaxed(addr) +#define CHIPREG_READ32_dmasync(addr) readl(addr) +#define CHIPREG_WRITE32(addr,val) writel(val, addr) +#define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr) +#define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr) + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_interrupt - MPT adapter (IOC) specific interrupt handler. + * @irq: irq number (not used) + * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure + * @r: pt_regs pointer (not used) + * + * This routine is registered via the request_irq() kernel API call, + * and handles all interrupts generated from a specific MPT adapter + * (also referred to as a IO Controller or IOC). + * This routine must clear the interrupt from the adapter and does + * so by reading the reply FIFO. Multiple replies may be processed + * per single call to this routine; up to MPT_MAX_REPLIES_PER_ISR + * which is currently set to 32 in mptbase.h. + * + * This routine handles register-level access of the adapter but + * dispatches (calls) a protocol-specific callback routine to handle + * the protocol-specific details of the MPT request completion. + */ +static irqreturn_t +mpt_interrupt(int irq, void *bus_id, struct pt_regs *r) +{ + MPT_ADAPTER *ioc; + MPT_FRAME_HDR *mf; + MPT_FRAME_HDR *mr; + u32 pa; + int req_idx; + int cb_idx; + int type; + int freeme; + + ioc = (MPT_ADAPTER *)bus_id; + + /* + * Drain the reply FIFO! + * + * NOTES: I've seen up to 10 replies processed in this loop, so far... + * Update: I've seen up to 9182 replies processed in this loop! ?? + * Update: Limit ourselves to processing max of N replies + * (bottom of loop). + */ + while (1) { + + if ((pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo)) == 0xFFFFFFFF) + return IRQ_HANDLED; + + cb_idx = 0; + freeme = 0; + + /* + * Check for non-TURBO reply! + */ + if (pa & MPI_ADDRESS_REPLY_A_BIT) { + u32 reply_dma_low; + u16 ioc_stat; + + /* non-TURBO reply! Hmmm, something may be up... + * Newest turbo reply mechanism; get address + * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)! + */ + + /* Map DMA address of reply header to cpu address. + * pa is 32 bits - but the dma address may be 32 or 64 bits + * get offset based only only the low addresses + */ + reply_dma_low = (pa = (pa << 1)); + mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames + + (reply_dma_low - ioc->reply_frames_low_dma)); + + req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx); + cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx; + mf = MPT_INDEX_2_MFPTR(ioc, req_idx); + + dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x\n", + ioc->name, mr, req_idx)); + DBG_DUMP_REPLY_FRAME(mr) + + /* NEW! 20010301 -sralston + * Check/log IOC log info + */ + ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus); + if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { + u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); + if (ioc->bus_type == FC) + mpt_fc_log_info(ioc, log_info); + else if (ioc->bus_type == SCSI) + mpt_sp_log_info(ioc, log_info); + } + if (ioc_stat & MPI_IOCSTATUS_MASK) { + if (ioc->bus_type == SCSI) + mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf); + } + } else { + /* + * Process turbo (context) reply... + */ + dmfprintk((MYIOC_s_INFO_FMT "Got TURBO reply req_idx=%08x\n", ioc->name, pa)); + type = (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT); + if (type == MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET) { + cb_idx = mpt_stm_index; + mf = NULL; + mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); + } else if (type == MPI_CONTEXT_REPLY_TYPE_LAN) { + cb_idx = mpt_lan_index; + /* + * BUG FIX! 20001218 -sralston + * Blind set of mf to NULL here was fatal + * after lan_reply says "freeme" + * Fix sort of combined with an optimization here; + * added explicit check for case where lan_reply + * was just returning 1 and doing nothing else. + * For this case skip the callback, but set up + * proper mf value first here:-) + */ + if ((pa & 0x58000000) == 0x58000000) { + req_idx = pa & 0x0000FFFF; + mf = MPT_INDEX_2_MFPTR(ioc, req_idx); + freeme = 1; + /* + * IMPORTANT! Invalidate the callback! + */ + cb_idx = 0; + } else { + mf = NULL; + } + mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); + } else { + req_idx = pa & 0x0000FFFF; + cb_idx = (pa & 0x00FF0000) >> 16; + mf = MPT_INDEX_2_MFPTR(ioc, req_idx); + mr = NULL; + } + pa = 0; /* No reply flush! */ + } + +#ifdef MPT_DEBUG_IRQ + if (ioc->bus_type == SCSI) { + /* Verify mf, mr are reasonable. + */ + if ((mf) && ((mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth)) + || (mf < ioc->req_frames)) ) { + printk(MYIOC_s_WARN_FMT + "mpt_interrupt: Invalid mf (%p) req_idx (%d)!\n", ioc->name, (void *)mf, req_idx); + cb_idx = 0; + pa = 0; + freeme = 0; + } + if ((pa) && (mr) && ((mr >= MPT_INDEX_2_RFPTR(ioc, ioc->req_depth)) + || (mr < ioc->reply_frames)) ) { + printk(MYIOC_s_WARN_FMT + "mpt_interrupt: Invalid rf (%p)!\n", ioc->name, (void *)mr); + cb_idx = 0; + pa = 0; + freeme = 0; + } + if (cb_idx > (MPT_MAX_PROTOCOL_DRIVERS-1)) { + printk(MYIOC_s_WARN_FMT + "mpt_interrupt: Invalid cb_idx (%d)!\n", ioc->name, cb_idx); + cb_idx = 0; + pa = 0; + freeme = 0; + } + } +#endif + + /* Check for (valid) IO callback! */ + if (cb_idx) { + /* Do the callback! */ + freeme = (*(MptCallbacks[cb_idx]))(ioc, mf, mr); + } + + if (pa) { + /* Flush (non-TURBO) reply with a WRITE! */ + CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa); + } + + if (freeme) { + unsigned long flags; + + /* Put Request back on FreeQ! */ + spin_lock_irqsave(&ioc->FreeQlock, flags); + list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ); +#ifdef MFCNT + ioc->mfcnt--; +#endif + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + } + + mb(); + } /* drain reply FIFO */ + + return IRQ_HANDLED; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_base_reply - MPT base driver's callback routine; all base driver + * "internal" request/reply processing is routed here. + * Currently used for EventNotification and EventAck handling. + * @ioc: Pointer to MPT_ADAPTER structure + * @mf: Pointer to original MPT request frame + * @reply: Pointer to MPT reply frame (NULL if TurboReply) + * + * Returns 1 indicating original alloc'd request frame ptr + * should be freed, or 0 if it shouldn't. + */ +static int +mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply) +{ + int freereq = 1; + u8 func; + + dprintk((MYIOC_s_INFO_FMT "mpt_base_reply() called\n", ioc->name)); + + if ((mf == NULL) || + (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) { + printk(MYIOC_s_ERR_FMT "NULL or BAD request frame ptr! (=%p)\n", + ioc->name, (void *)mf); + return 1; + } + + if (reply == NULL) { + dprintk((MYIOC_s_ERR_FMT "Unexpected NULL Event (turbo?) reply!\n", + ioc->name)); + return 1; + } + + if (!(reply->u.hdr.MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)) { + dmfprintk((KERN_INFO MYNAM ": Original request frame (@%p) header\n", mf)); + DBG_DUMP_REQUEST_FRAME_HDR(mf) + } + + func = reply->u.hdr.Function; + dprintk((MYIOC_s_INFO_FMT "mpt_base_reply, Function=%02Xh\n", + ioc->name, func)); + + if (func == MPI_FUNCTION_EVENT_NOTIFICATION) { + EventNotificationReply_t *pEvReply = (EventNotificationReply_t *) reply; + int evHandlers = 0; + int results; + + results = ProcessEventNotification(ioc, pEvReply, &evHandlers); + if (results != evHandlers) { + /* CHECKME! Any special handling needed here? */ + devtprintk((MYIOC_s_WARN_FMT "Called %d event handlers, sum results = %d\n", + ioc->name, evHandlers, results)); + } + + /* + * Hmmm... It seems that EventNotificationReply is an exception + * to the rule of one reply per request. + */ + if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) + freereq = 0; + +#ifdef CONFIG_PROC_FS +// LogEvent(ioc, pEvReply); +#endif + + } else if (func == MPI_FUNCTION_EVENT_ACK) { + dprintk((MYIOC_s_INFO_FMT "mpt_base_reply, EventAck reply received\n", + ioc->name)); + } else if (func == MPI_FUNCTION_CONFIG || + func == MPI_FUNCTION_TOOLBOX) { + CONFIGPARMS *pCfg; + unsigned long flags; + + dcprintk((MYIOC_s_INFO_FMT "config_complete (mf=%p,mr=%p)\n", + ioc->name, mf, reply)); + + pCfg = * ((CONFIGPARMS **)((u8 *) mf + ioc->req_sz - sizeof(void *))); + + if (pCfg) { + /* disable timer and remove from linked list */ + del_timer(&pCfg->timer); + + spin_lock_irqsave(&ioc->FreeQlock, flags); + list_del(&pCfg->linkage); + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + + /* + * If IOC Status is SUCCESS, save the header + * and set the status code to GOOD. + */ + pCfg->status = MPT_CONFIG_ERROR; + if (reply) { + ConfigReply_t *pReply = (ConfigReply_t *)reply; + u16 status; + + status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK; + dcprintk((KERN_NOTICE " IOCStatus=%04xh, IOCLogInfo=%08xh\n", + status, le32_to_cpu(pReply->IOCLogInfo))); + + pCfg->status = status; + if (status == MPI_IOCSTATUS_SUCCESS) { + pCfg->hdr->PageVersion = pReply->Header.PageVersion; + pCfg->hdr->PageLength = pReply->Header.PageLength; + pCfg->hdr->PageNumber = pReply->Header.PageNumber; + pCfg->hdr->PageType = pReply->Header.PageType; + } + } + + /* + * Wake up the original calling thread + */ + pCfg->wait_done = 1; + wake_up(&mpt_waitq); + } + } else { + printk(MYIOC_s_ERR_FMT "Unexpected msg function (=%02Xh) reply received!\n", + ioc->name, func); + } + + /* + * Conditionally tell caller to free the original + * EventNotification/EventAck/unexpected request frame! + */ + return freereq; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_register - Register protocol-specific main callback handler. + * @cbfunc: callback function pointer + * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value) + * + * This routine is called by a protocol-specific driver (SCSI host, + * LAN, SCSI target) to register it's reply callback routine. Each + * protocol-specific driver must do this before it will be able to + * use any IOC resources, such as obtaining request frames. + * + * NOTES: The SCSI protocol driver currently calls this routine thrice + * in order to register separate callbacks; one for "normal" SCSI IO; + * one for MptScsiTaskMgmt requests; one for Scan/DV requests. + * + * Returns a positive integer valued "handle" in the + * range (and S.O.D. order) {N,...,7,6,5,...,1} if successful. + * Any non-positive return value (including zero!) should be considered + * an error by the caller. + */ +int +mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass) +{ + int i; + + last_drv_idx = -1; + + /* + * Search for empty callback slot in this order: {N,...,7,6,5,...,1} + * (slot/handle 0 is reserved!) + */ + for (i = MPT_MAX_PROTOCOL_DRIVERS-1; i; i--) { + if (MptCallbacks[i] == NULL) { + MptCallbacks[i] = cbfunc; + MptDriverClass[i] = dclass; + MptEvHandlers[i] = NULL; + last_drv_idx = i; + break; + } + } + + return last_drv_idx; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_deregister - Deregister a protocol drivers resources. + * @cb_idx: previously registered callback handle + * + * Each protocol-specific driver should call this routine when it's + * module is unloaded. + */ +void +mpt_deregister(int cb_idx) +{ + if ((cb_idx >= 0) && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) { + MptCallbacks[cb_idx] = NULL; + MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; + MptEvHandlers[cb_idx] = NULL; + + last_drv_idx++; + } +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_event_register - Register protocol-specific event callback + * handler. + * @cb_idx: previously registered (via mpt_register) callback handle + * @ev_cbfunc: callback function + * + * This routine can be called by one or more protocol-specific drivers + * if/when they choose to be notified of MPT events. + * + * Returns 0 for success. + */ +int +mpt_event_register(int cb_idx, MPT_EVHANDLER ev_cbfunc) +{ + if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) + return -1; + + MptEvHandlers[cb_idx] = ev_cbfunc; + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_event_deregister - Deregister protocol-specific event callback + * handler. + * @cb_idx: previously registered callback handle + * + * Each protocol-specific driver should call this routine + * when it does not (or can no longer) handle events, + * or when it's module is unloaded. + */ +void +mpt_event_deregister(int cb_idx) +{ + if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) + return; + + MptEvHandlers[cb_idx] = NULL; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_reset_register - Register protocol-specific IOC reset handler. + * @cb_idx: previously registered (via mpt_register) callback handle + * @reset_func: reset function + * + * This routine can be called by one or more protocol-specific drivers + * if/when they choose to be notified of IOC resets. + * + * Returns 0 for success. + */ +int +mpt_reset_register(int cb_idx, MPT_RESETHANDLER reset_func) +{ + if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) + return -1; + + MptResetHandlers[cb_idx] = reset_func; + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_reset_deregister - Deregister protocol-specific IOC reset handler. + * @cb_idx: previously registered callback handle + * + * Each protocol-specific driver should call this routine + * when it does not (or can no longer) handle IOC reset handling, + * or when it's module is unloaded. + */ +void +mpt_reset_deregister(int cb_idx) +{ + if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) + return; + + MptResetHandlers[cb_idx] = NULL; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_device_driver_register - Register device driver hooks + */ +int +mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, int cb_idx) +{ + MPT_ADAPTER *ioc; + int error=0; + + if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) { + error= -EINVAL; + return error; + } + + MptDeviceDriverHandlers[cb_idx] = dd_cbfunc; + + /* call per pci device probe entry point */ + list_for_each_entry(ioc, &ioc_list, list) { + if(dd_cbfunc->probe) { + error = dd_cbfunc->probe(ioc->pcidev, + ioc->pcidev->driver->id_table); + if(error != 0) + return error; + } + } + + return error; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_device_driver_deregister - DeRegister device driver hooks + */ +void +mpt_device_driver_deregister(int cb_idx) +{ + struct mpt_pci_driver *dd_cbfunc; + MPT_ADAPTER *ioc; + + if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) + return; + + dd_cbfunc = MptDeviceDriverHandlers[cb_idx]; + + list_for_each_entry(ioc, &ioc_list, list) { + if (dd_cbfunc->remove) + dd_cbfunc->remove(ioc->pcidev); + } + + MptDeviceDriverHandlers[cb_idx] = NULL; +} + + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_get_msg_frame - Obtain a MPT request frame from the pool (of 1024) + * allocated per MPT adapter. + * @handle: Handle of registered MPT protocol driver + * @ioc: Pointer to MPT adapter structure + * + * Returns pointer to a MPT request frame or %NULL if none are available + * or IOC is not active. + */ +MPT_FRAME_HDR* +mpt_get_msg_frame(int handle, MPT_ADAPTER *ioc) +{ + MPT_FRAME_HDR *mf; + unsigned long flags; + u16 req_idx; /* Request index */ + + /* validate handle and ioc identifier */ + +#ifdef MFCNT + if (!ioc->active) + printk(KERN_WARNING "IOC Not Active! mpt_get_msg_frame returning NULL!\n"); +#endif + + /* If interrupts are not attached, do not return a request frame */ + if (!ioc->active) + return NULL; + + spin_lock_irqsave(&ioc->FreeQlock, flags); + if (!list_empty(&ioc->FreeQ)) { + int req_offset; + + mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR, + u.frame.linkage.list); + list_del(&mf->u.frame.linkage.list); + mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle; /* byte */ + req_offset = (u8 *)mf - (u8 *)ioc->req_frames; + /* u16! */ + req_idx = cpu_to_le16(req_offset / ioc->req_sz); + mf->u.frame.hwhdr.msgctxu.fld.req_idx = req_idx; + mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; + ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame; /* Default, will be changed if necessary in SG generation */ +#ifdef MFCNT + ioc->mfcnt++; +#endif + } + else + mf = NULL; + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + +#ifdef MFCNT + if (mf == NULL) + printk(KERN_WARNING "IOC Active. No free Msg Frames! Count 0x%x Max 0x%x\n", ioc->mfcnt, ioc->req_depth); + mfcounter++; + if (mfcounter == PRINT_MF_COUNT) + printk(KERN_INFO "MF Count 0x%x Max 0x%x \n", ioc->mfcnt, ioc->req_depth); +#endif + + dmfprintk((KERN_INFO MYNAM ": %s: mpt_get_msg_frame(%d,%d), got mf=%p\n", + ioc->name, handle, ioc->id, mf)); + return mf; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_put_msg_frame - Send a protocol specific MPT request frame + * to a IOC. + * @handle: Handle of registered MPT protocol driver + * @ioc: Pointer to MPT adapter structure + * @mf: Pointer to MPT request frame + * + * This routine posts a MPT request frame to the request post FIFO of a + * specific MPT adapter. + */ +void +mpt_put_msg_frame(int handle, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) +{ + u32 mf_dma_addr; + int req_offset; + u16 req_idx; /* Request index */ + + /* ensure values are reset properly! */ + mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle; /* byte */ + req_offset = (u8 *)mf - (u8 *)ioc->req_frames; + /* u16! */ + req_idx = cpu_to_le16(req_offset / ioc->req_sz); + mf->u.frame.hwhdr.msgctxu.fld.req_idx = req_idx; + mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; + +#ifdef MPT_DEBUG_MSG_FRAME + { + u32 *m = mf->u.frame.hwhdr.__hdr; + int ii, n; + + printk(KERN_INFO MYNAM ": %s: About to Put msg frame @ %p:\n" KERN_INFO " ", + ioc->name, m); + n = ioc->req_sz/4 - 1; + while (m[n] == 0) + n--; + for (ii=0; ii<=n; ii++) { + if (ii && ((ii%8)==0)) + printk("\n" KERN_INFO " "); + printk(" %08x", le32_to_cpu(m[ii])); + } + printk("\n"); + } +#endif + + mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx]; + dsgprintk((MYIOC_s_INFO_FMT "mf_dma_addr=%x req_idx=%d RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx, ioc->RequestNB[req_idx])); + CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_free_msg_frame - Place MPT request frame back on FreeQ. + * @handle: Handle of registered MPT protocol driver + * @ioc: Pointer to MPT adapter structure + * @mf: Pointer to MPT request frame + * + * This routine places a MPT request frame back on the MPT adapter's + * FreeQ. + */ +void +mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) +{ + unsigned long flags; + + /* Put Request back on FreeQ! */ + spin_lock_irqsave(&ioc->FreeQlock, flags); + list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ); +#ifdef MFCNT + ioc->mfcnt--; +#endif + spin_unlock_irqrestore(&ioc->FreeQlock, flags); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_add_sge - Place a simple SGE at address pAddr. + * @pAddr: virtual address for SGE + * @flagslength: SGE flags and data transfer length + * @dma_addr: Physical address + * + * This routine places a MPT request frame back on the MPT adapter's + * FreeQ. + */ +void +mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr) +{ + if (sizeof(dma_addr_t) == sizeof(u64)) { + SGESimple64_t *pSge = (SGESimple64_t *) pAddr; + u32 tmp = dma_addr & 0xFFFFFFFF; + + pSge->FlagsLength = cpu_to_le32(flagslength); + pSge->Address.Low = cpu_to_le32(tmp); + tmp = (u32) ((u64)dma_addr >> 32); + pSge->Address.High = cpu_to_le32(tmp); + + } else { + SGESimple32_t *pSge = (SGESimple32_t *) pAddr; + pSge->FlagsLength = cpu_to_le32(flagslength); + pSge->Address = cpu_to_le32(dma_addr); + } +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_send_handshake_request - Send MPT request via doorbell + * handshake method. + * @handle: Handle of registered MPT protocol driver + * @ioc: Pointer to MPT adapter structure + * @reqBytes: Size of the request in bytes + * @req: Pointer to MPT request frame + * @sleepFlag: Use schedule if CAN_SLEEP else use udelay. + * + * This routine is used exclusively to send MptScsiTaskMgmt + * requests since they are required to be sent via doorbell handshake. + * + * NOTE: It is the callers responsibility to byte-swap fields in the + * request which are greater than 1 byte in size. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag) +{ + int r = 0; + u8 *req_as_bytes; + int ii; + + /* State is known to be good upon entering + * this function so issue the bus reset + * request. + */ + + /* + * Emulate what mpt_put_msg_frame() does /wrt to sanity + * setting cb_idx/req_idx. But ONLY if this request + * is in proper (pre-alloc'd) request buffer range... + */ + ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req); + if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) { + MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req; + mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii); + mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle; + } + + /* Make sure there are no doorbells */ + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + + CHIPREG_WRITE32(&ioc->chip->Doorbell, + ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | + ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); + + /* Wait for IOC doorbell int */ + if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) { + return ii; + } + + /* Read doorbell and check for active bit */ + if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) + return -5; + + dhsprintk((KERN_INFO MYNAM ": %s: mpt_send_handshake_request start, WaitCnt=%d\n", + ioc->name, ii)); + + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + + if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { + return -2; + } + + /* Send request via doorbell handshake */ + req_as_bytes = (u8 *) req; + for (ii = 0; ii < reqBytes/4; ii++) { + u32 word; + + word = ((req_as_bytes[(ii*4) + 0] << 0) | + (req_as_bytes[(ii*4) + 1] << 8) | + (req_as_bytes[(ii*4) + 2] << 16) | + (req_as_bytes[(ii*4) + 3] << 24)); + CHIPREG_WRITE32(&ioc->chip->Doorbell, word); + if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { + r = -3; + break; + } + } + + if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0) + r = 0; + else + r = -4; + + /* Make sure there are no doorbells */ + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + + return r; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_verify_adapter - Given a unique IOC identifier, set pointer to + * the associated MPT adapter structure. + * @iocid: IOC unique identifier (integer) + * @iocpp: Pointer to pointer to IOC adapter + * + * Returns iocid and sets iocpp. + */ +int +mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp) +{ + MPT_ADAPTER *ioc; + + list_for_each_entry(ioc,&ioc_list,list) { + if (ioc->id == iocid) { + *iocpp =ioc; + return iocid; + } + } + + *iocpp = NULL; + return -1; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptbase_probe - Install a PCI intelligent MPT adapter. + * @pdev: Pointer to pci_dev structure + * + * This routine performs all the steps necessary to bring the IOC of + * a MPT adapter to a OPERATIONAL state. This includes registering + * memory regions, registering the interrupt, and allocating request + * and reply memory pools. + * + * This routine also pre-fetches the LAN MAC address of a Fibre Channel + * MPT adapter. + * + * Returns 0 for success, non-zero for failure. + * + * TODO: Add support for polled controllers + */ +static int __devinit +mptbase_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + MPT_ADAPTER *ioc; + u8 __iomem *mem; + unsigned long mem_phys; + unsigned long port; + u32 msize; + u32 psize; + int ii; + int r = -ENODEV; + u64 mask = 0xffffffffffffffffULL; + u8 revision; + u8 pcixcmd; + static int mpt_ids = 0; +#ifdef CONFIG_PROC_FS + struct proc_dir_entry *dent, *ent; +#endif + + if (pci_enable_device(pdev)) + return r; + + dinitprintk((KERN_WARNING MYNAM ": mpt_adapter_install\n")); + + if (!pci_set_dma_mask(pdev, mask)) { + dprintk((KERN_INFO MYNAM + ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n")); + } else if (pci_set_dma_mask(pdev, (u64) 0xffffffff)) { + printk(KERN_WARNING MYNAM ": 32 BIT PCI BUS DMA ADDRESSING NOT SUPPORTED\n"); + return r; + } + + if (!pci_set_consistent_dma_mask(pdev, mask)) + dprintk((KERN_INFO MYNAM + ": Using 64 bit consistent mask\n")); + else + dprintk((KERN_INFO MYNAM + ": Not using 64 bit consistent mask\n")); + + ioc = kmalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC); + if (ioc == NULL) { + printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n"); + return -ENOMEM; + } + memset(ioc, 0, sizeof(MPT_ADAPTER)); + ioc->alloc_total = sizeof(MPT_ADAPTER); + ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */ + ioc->reply_sz = MPT_REPLY_FRAME_SIZE; + + ioc->pcidev = pdev; + ioc->diagPending = 0; + spin_lock_init(&ioc->diagLock); + + /* Initialize the event logging. + */ + ioc->eventTypes = 0; /* None */ + ioc->eventContext = 0; + ioc->eventLogSize = 0; + ioc->events = NULL; + +#ifdef MFCNT + ioc->mfcnt = 0; +#endif + + ioc->cached_fw = NULL; + + /* Initilize SCSI Config Data structure + */ + memset(&ioc->spi_data, 0, sizeof(ScsiCfgData)); + + /* Initialize the running configQ head. + */ + INIT_LIST_HEAD(&ioc->configQ); + + /* Find lookup slot. */ + INIT_LIST_HEAD(&ioc->list); + ioc->id = mpt_ids++; + + mem_phys = msize = 0; + port = psize = 0; + for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) { + if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) { + /* Get I/O space! */ + port = pci_resource_start(pdev, ii); + psize = pci_resource_len(pdev,ii); + } else { + /* Get memmap */ + mem_phys = pci_resource_start(pdev, ii); + msize = pci_resource_len(pdev,ii); + break; + } + } + ioc->mem_size = msize; + + if (ii == DEVICE_COUNT_RESOURCE) { + printk(KERN_ERR MYNAM ": ERROR - MPT adapter has no memory regions defined!\n"); + kfree(ioc); + return -EINVAL; + } + + dinitprintk((KERN_INFO MYNAM ": MPT adapter @ %lx, msize=%dd bytes\n", mem_phys, msize)); + dinitprintk((KERN_INFO MYNAM ": (port i/o @ %lx, psize=%dd bytes)\n", port, psize)); + + mem = NULL; + /* Get logical ptr for PciMem0 space */ + /*mem = ioremap(mem_phys, msize);*/ + mem = ioremap(mem_phys, 0x100); + if (mem == NULL) { + printk(KERN_ERR MYNAM ": ERROR - Unable to map adapter memory!\n"); + kfree(ioc); + return -EINVAL; + } + ioc->memmap = mem; + dinitprintk((KERN_INFO MYNAM ": mem = %p, mem_phys = %lx\n", mem, mem_phys)); + + dinitprintk((KERN_INFO MYNAM ": facts @ %p, pfacts[0] @ %p\n", + &ioc->facts, &ioc->pfacts[0])); + + ioc->mem_phys = mem_phys; + ioc->chip = (SYSIF_REGS __iomem *)mem; + + /* Save Port IO values in case we need to do downloadboot */ + { + u8 *pmem = (u8*)port; + ioc->pio_mem_phys = port; + ioc->pio_chip = (SYSIF_REGS __iomem *)pmem; + } + + if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC909) { + ioc->prod_name = "LSIFC909"; + ioc->bus_type = FC; + } + if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929) { + ioc->prod_name = "LSIFC929"; + ioc->bus_type = FC; + } + else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC919) { + ioc->prod_name = "LSIFC919"; + ioc->bus_type = FC; + } + else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929X) { + pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision); + ioc->bus_type = FC; + if (revision < XL_929) { + ioc->prod_name = "LSIFC929X"; + /* 929X Chip Fix. Set Split transactions level + * for PCIX. Set MOST bits to zero. + */ + pci_read_config_byte(pdev, 0x6a, &pcixcmd); + pcixcmd &= 0x8F; + pci_write_config_byte(pdev, 0x6a, pcixcmd); + } else { + ioc->prod_name = "LSIFC929XL"; + /* 929XL Chip Fix. Set MMRBC to 0x08. + */ + pci_read_config_byte(pdev, 0x6a, &pcixcmd); + pcixcmd |= 0x08; + pci_write_config_byte(pdev, 0x6a, pcixcmd); + } + } + else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC919X) { + ioc->prod_name = "LSIFC919X"; + ioc->bus_type = FC; + /* 919X Chip Fix. Set Split transactions level + * for PCIX. Set MOST bits to zero. + */ + pci_read_config_byte(pdev, 0x6a, &pcixcmd); + pcixcmd &= 0x8F; + pci_write_config_byte(pdev, 0x6a, pcixcmd); + } + else if (pdev->device == MPI_MANUFACTPAGE_DEVID_53C1030) { + ioc->prod_name = "LSI53C1030"; + ioc->bus_type = SCSI; + /* 1030 Chip Fix. Disable Split transactions + * for PCIX. Set MOST bits to zero if Rev < C0( = 8). + */ + pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision); + if (revision < C0_1030) { + pci_read_config_byte(pdev, 0x6a, &pcixcmd); + pcixcmd &= 0x8F; + pci_write_config_byte(pdev, 0x6a, pcixcmd); + } + } + else if (pdev->device == MPI_MANUFACTPAGE_DEVID_1030_53C1035) { + ioc->prod_name = "LSI53C1035"; + ioc->bus_type = SCSI; + } + + sprintf(ioc->name, "ioc%d", ioc->id); + + spin_lock_init(&ioc->FreeQlock); + + /* Disable all! */ + CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); + ioc->active = 0; + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + + /* Set lookup ptr. */ + list_add_tail(&ioc->list, &ioc_list); + + ioc->pci_irq = -1; + if (pdev->irq) { + r = request_irq(pdev->irq, mpt_interrupt, SA_SHIRQ, ioc->name, ioc); + + if (r < 0) { +#ifndef __sparc__ + printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %d!\n", + ioc->name, pdev->irq); +#else + printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %s!\n", + ioc->name, __irq_itoa(pdev->irq)); +#endif + list_del(&ioc->list); + iounmap(mem); + kfree(ioc); + return -EBUSY; + } + + ioc->pci_irq = pdev->irq; + + pci_set_master(pdev); /* ?? */ + pci_set_drvdata(pdev, ioc); + +#ifndef __sparc__ + dprintk((KERN_INFO MYNAM ": %s installed at interrupt %d\n", ioc->name, pdev->irq)); +#else + dprintk((KERN_INFO MYNAM ": %s installed at interrupt %s\n", ioc->name, __irq_itoa(pdev->irq))); +#endif + } + + /* NEW! 20010220 -sralston + * Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets. + */ + mpt_detect_bound_ports(ioc, pdev); + + if ((r = mpt_do_ioc_recovery(ioc, + MPT_HOSTEVENT_IOC_BRINGUP, CAN_SLEEP)) != 0) { + printk(KERN_WARNING MYNAM + ": WARNING - %s did not initialize properly! (%d)\n", + ioc->name, r); + + list_del(&ioc->list); + free_irq(ioc->pci_irq, ioc); + iounmap(mem); + kfree(ioc); + pci_set_drvdata(pdev, NULL); + return r; + } + + /* call per device driver probe entry point */ + for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) { + if(MptDeviceDriverHandlers[ii] && + MptDeviceDriverHandlers[ii]->probe) { + MptDeviceDriverHandlers[ii]->probe(pdev,id); + } + } + +#ifdef CONFIG_PROC_FS + /* + * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter. + */ + dent = proc_mkdir(ioc->name, mpt_proc_root_dir); + if (dent) { + ent = create_proc_entry("info", S_IFREG|S_IRUGO, dent); + if (ent) { + ent->read_proc = procmpt_iocinfo_read; + ent->data = ioc; + } + ent = create_proc_entry("summary", S_IFREG|S_IRUGO, dent); + if (ent) { + ent->read_proc = procmpt_summary_read; + ent->data = ioc; + } + } +#endif + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptbase_remove - Remove a PCI intelligent MPT adapter. + * @pdev: Pointer to pci_dev structure + * + */ + +static void __devexit +mptbase_remove(struct pci_dev *pdev) +{ + MPT_ADAPTER *ioc = pci_get_drvdata(pdev); + char pname[32]; + int ii; + + sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name); + remove_proc_entry(pname, NULL); + sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name); + remove_proc_entry(pname, NULL); + sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name); + remove_proc_entry(pname, NULL); + + /* call per device driver remove entry point */ + for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) { + if(MptDeviceDriverHandlers[ii] && + MptDeviceDriverHandlers[ii]->remove) { + MptDeviceDriverHandlers[ii]->remove(pdev); + } + } + + /* Disable interrupts! */ + CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); + + ioc->active = 0; + synchronize_irq(pdev->irq); + + /* Clear any lingering interrupt */ + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + + CHIPREG_READ32(&ioc->chip->IntStatus); + + mpt_adapter_dispose(ioc); + + pci_set_drvdata(pdev, NULL); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptbase_shutdown - + * + */ +static void +mptbase_shutdown(struct device * dev) +{ + int ii; + + /* call per device driver shutdown entry point */ + for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) { + if(MptDeviceDriverHandlers[ii] && + MptDeviceDriverHandlers[ii]->shutdown) { + MptDeviceDriverHandlers[ii]->shutdown(dev); + } + } + +} + + +/************************************************************************** + * Power Management + */ +#ifdef CONFIG_PM +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptbase_suspend - Fusion MPT base driver suspend routine. + * + * + */ +static int +mptbase_suspend(struct pci_dev *pdev, u32 state) +{ + u32 device_state; + MPT_ADAPTER *ioc = pci_get_drvdata(pdev); + int ii; + + switch(state) + { + case 1: /* S1 */ + device_state=1; /* D1 */; + break; + case 3: /* S3 */ + case 4: /* S4 */ + device_state=3; /* D3 */; + break; + default: + return -EAGAIN /*FIXME*/; + break; + } + + printk(MYIOC_s_INFO_FMT + "pci-suspend: pdev=0x%p, slot=%s, Entering operating state [D%d]\n", + ioc->name, pdev, pci_name(pdev), device_state); + + /* call per device driver suspend entry point */ + for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) { + if(MptDeviceDriverHandlers[ii] && + MptDeviceDriverHandlers[ii]->suspend) { + MptDeviceDriverHandlers[ii]->suspend(pdev, state); + } + } + + pci_save_state(pdev); + + /* put ioc into READY_STATE */ + if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) { + printk(MYIOC_s_ERR_FMT + "pci-suspend: IOC msg unit reset failed!\n", ioc->name); + } + + /* disable interrupts */ + CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); + ioc->active = 0; + + /* Clear any lingering interrupt */ + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + + pci_disable_device(pdev); + pci_set_power_state(pdev, device_state); + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptbase_resume - Fusion MPT base driver resume routine. + * + * + */ +static int +mptbase_resume(struct pci_dev *pdev) +{ + MPT_ADAPTER *ioc = pci_get_drvdata(pdev); + u32 device_state = pdev->current_state; + int recovery_state; + int ii; + + printk(MYIOC_s_INFO_FMT + "pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n", + ioc->name, pdev, pci_name(pdev), device_state); + + pci_set_power_state(pdev, 0); + pci_restore_state(pdev); + pci_enable_device(pdev); + + /* enable interrupts */ + CHIPREG_WRITE32(&ioc->chip->IntMask, ~(MPI_HIM_RIM)); + ioc->active = 1; + + /* F/W not running */ + if(!CHIPREG_READ32(&ioc->chip->Doorbell)) { + /* enable domain validation flags */ + for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { + ioc->spi_data.dvStatus[ii] |= MPT_SCSICFG_NEED_DV; + } + } + + printk(MYIOC_s_INFO_FMT + "pci-resume: ioc-state=0x%x,doorbell=0x%x\n", + ioc->name, + (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT), + CHIPREG_READ32(&ioc->chip->Doorbell)); + + /* bring ioc to operational state */ + if ((recovery_state = mpt_do_ioc_recovery(ioc, + MPT_HOSTEVENT_IOC_RECOVER, CAN_SLEEP)) != 0) { + printk(MYIOC_s_INFO_FMT + "pci-resume: Cannot recover, error:[%x]\n", + ioc->name, recovery_state); + } else { + printk(MYIOC_s_INFO_FMT + "pci-resume: success\n", ioc->name); + } + + /* call per device driver resume entry point */ + for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) { + if(MptDeviceDriverHandlers[ii] && + MptDeviceDriverHandlers[ii]->resume) { + MptDeviceDriverHandlers[ii]->resume(pdev); + } + } + + return 0; +} +#endif + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_do_ioc_recovery - Initialize or recover MPT adapter. + * @ioc: Pointer to MPT adapter structure + * @reason: Event word / reason + * @sleepFlag: Use schedule if CAN_SLEEP else use udelay. + * + * This routine performs all the steps necessary to bring the IOC + * to a OPERATIONAL state. + * + * This routine also pre-fetches the LAN MAC address of a Fibre Channel + * MPT adapter. + * + * Returns: + * 0 for success + * -1 if failed to get board READY + * -2 if READY but IOCFacts Failed + * -3 if READY but PrimeIOCFifos Failed + * -4 if READY but IOCInit Failed + */ +static int +mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) +{ + int hard_reset_done = 0; + int alt_ioc_ready = 0; + int hard; + int rc=0; + int ii; + int handlers; + int ret = 0; + int reset_alt_ioc_active = 0; + + printk(KERN_INFO MYNAM ": Initiating %s %s\n", + ioc->name, reason==MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery"); + + /* Disable reply interrupts (also blocks FreeQ) */ + CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); + ioc->active = 0; + + if (ioc->alt_ioc) { + if (ioc->alt_ioc->active) + reset_alt_ioc_active = 1; + + /* Disable alt-IOC's reply interrupts (and FreeQ) for a bit ... */ + CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 0xFFFFFFFF); + ioc->alt_ioc->active = 0; + } + + hard = 1; + if (reason == MPT_HOSTEVENT_IOC_BRINGUP) + hard = 0; + + if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) { + if (hard_reset_done == -4) { + printk(KERN_WARNING MYNAM ": %s Owned by PEER..skipping!\n", + ioc->name); + + if (reset_alt_ioc_active && ioc->alt_ioc) { + /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */ + dprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n", + ioc->alt_ioc->name)); + CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM)); + ioc->alt_ioc->active = 1; + } + + } else { + printk(KERN_WARNING MYNAM ": %s NOT READY WARNING!\n", + ioc->name); + } + return -1; + } + + /* hard_reset_done = 0 if a soft reset was performed + * and 1 if a hard reset was performed. + */ + if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) { + if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0) + alt_ioc_ready = 1; + else + printk(KERN_WARNING MYNAM + ": alt-%s: Not ready WARNING!\n", + ioc->alt_ioc->name); + } + + for (ii=0; ii<5; ii++) { + /* Get IOC facts! Allow 5 retries */ + if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0) + break; + } + + + if (ii == 5) { + dinitprintk((MYIOC_s_INFO_FMT "Retry IocFacts failed rc=%x\n", ioc->name, rc)); + ret = -2; + } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { + MptDisplayIocCapabilities(ioc); + } + + if (alt_ioc_ready) { + if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) { + dinitprintk((MYIOC_s_INFO_FMT "Initial Alt IocFacts failed rc=%x\n", ioc->name, rc)); + /* Retry - alt IOC was initialized once + */ + rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason); + } + if (rc) { + dinitprintk((MYIOC_s_INFO_FMT "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc)); + alt_ioc_ready = 0; + reset_alt_ioc_active = 0; + } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { + MptDisplayIocCapabilities(ioc->alt_ioc); + } + } + + /* Prime reply & request queues! + * (mucho alloc's) Must be done prior to + * init as upper addresses are needed for init. + * If fails, continue with alt-ioc processing + */ + if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0)) + ret = -3; + + /* May need to check/upload firmware & data here! + * If fails, continue with alt-ioc processing + */ + if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0)) + ret = -4; +// NEW! + if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) { + printk(KERN_WARNING MYNAM ": alt-%s: (%d) FIFO mgmt alloc WARNING!\n", + ioc->alt_ioc->name, rc); + alt_ioc_ready = 0; + reset_alt_ioc_active = 0; + } + + if (alt_ioc_ready) { + if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) { + alt_ioc_ready = 0; + reset_alt_ioc_active = 0; + printk(KERN_WARNING MYNAM + ": alt-%s: (%d) init failure WARNING!\n", + ioc->alt_ioc->name, rc); + } + } + + if (reason == MPT_HOSTEVENT_IOC_BRINGUP){ + if (ioc->upload_fw) { + ddlprintk((MYIOC_s_INFO_FMT + "firmware upload required!\n", ioc->name)); + + /* Controller is not operational, cannot do upload + */ + if (ret == 0) { + rc = mpt_do_upload(ioc, sleepFlag); + if (rc != 0) + printk(KERN_WARNING MYNAM ": firmware upload failure!\n"); + } + } + } + + if (ret == 0) { + /* Enable! (reply interrupt) */ + CHIPREG_WRITE32(&ioc->chip->IntMask, ~(MPI_HIM_RIM)); + ioc->active = 1; + } + + if (reset_alt_ioc_active && ioc->alt_ioc) { + /* (re)Enable alt-IOC! (reply interrupt) */ + dprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n", + ioc->alt_ioc->name)); + CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM)); + ioc->alt_ioc->active = 1; + } + + /* NEW! 20010120 -sralston + * Enable MPT base driver management of EventNotification + * and EventAck handling. + */ + if ((ret == 0) && (!ioc->facts.EventState)) + (void) SendEventNotification(ioc, 1); /* 1=Enable EventNotification */ + + if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState) + (void) SendEventNotification(ioc->alt_ioc, 1); /* 1=Enable EventNotification */ + + /* (Bugzilla:fibrebugs, #513) + * Bug fix (part 2)! 20010905 -sralston + * Add additional "reason" check before call to GetLanConfigPages + * (combined with GetIoUnitPage2 call). This prevents a somewhat + * recursive scenario; GetLanConfigPages times out, timer expired + * routine calls HardResetHandler, which calls into here again, + * and we try GetLanConfigPages again... + */ + if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { + if (ioc->bus_type == FC) { + /* + * Pre-fetch FC port WWN and stuff... + * (FCPortPage0_t stuff) + */ + for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { + (void) GetFcPortPage0(ioc, ii); + } + + if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) && + (ioc->lan_cnfg_page0.Header.PageLength == 0)) { + /* + * Pre-fetch the ports LAN MAC address! + * (LANPage1_t stuff) + */ + (void) GetLanConfigPages(ioc); +#ifdef MPT_DEBUG + { + u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; + dprintk((MYIOC_s_INFO_FMT "LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n", + ioc->name, a[5], a[4], a[3], a[2], a[1], a[0] )); + } +#endif + } + } else { + /* Get NVRAM and adapter maximums from SPP 0 and 2 + */ + mpt_GetScsiPortSettings(ioc, 0); + + /* Get version and length of SDP 1 + */ + mpt_readScsiDevicePageHeaders(ioc, 0); + + /* Find IM volumes + */ + if (ioc->facts.MsgVersion >= 0x0102) + mpt_findImVolumes(ioc); + + /* Check, and possibly reset, the coalescing value + */ + mpt_read_ioc_pg_1(ioc); + + mpt_read_ioc_pg_4(ioc); + } + + GetIoUnitPage2(ioc); + } + + /* + * Call each currently registered protocol IOC reset handler + * with post-reset indication. + * NOTE: If we're doing _IOC_BRINGUP, there can be no + * MptResetHandlers[] registered yet. + */ + if (hard_reset_done) { + rc = handlers = 0; + for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) { + if ((ret == 0) && MptResetHandlers[ii]) { + dprintk((MYIOC_s_INFO_FMT "Calling IOC post_reset handler #%d\n", + ioc->name, ii)); + rc += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_POST_RESET); + handlers++; + } + + if (alt_ioc_ready && MptResetHandlers[ii]) { + dprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n", + ioc->name, ioc->alt_ioc->name, ii)); + rc += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET); + handlers++; + } + } + /* FIXME? Examine results here? */ + } + + return ret; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_detect_bound_ports - Search for PCI bus/dev_function + * which matches PCI bus/dev_function (+/-1) for newly discovered 929, + * 929X, 1030 or 1035. + * @ioc: Pointer to MPT adapter structure + * @pdev: Pointer to (struct pci_dev) structure + * + * If match on PCI dev_function +/-1 is found, bind the two MPT adapters + * using alt_ioc pointer fields in their %MPT_ADAPTER structures. + */ +static void +mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev) +{ + unsigned int match_lo, match_hi; + MPT_ADAPTER *ioc_srch; + + match_lo = pdev->devfn-1; + match_hi = pdev->devfn+1; + dprintk((MYIOC_s_INFO_FMT "PCI bus/devfn=%x/%x, searching for devfn match on %x or %x\n", + ioc->name, pdev->bus->number, pdev->devfn, match_lo, match_hi)); + + list_for_each_entry(ioc_srch, &ioc_list, list) { + struct pci_dev *_pcidev = ioc_srch->pcidev; + + if ((_pcidev->device == pdev->device) && + (_pcidev->bus->number == pdev->bus->number) && + (_pcidev->devfn == match_lo || _pcidev->devfn == match_hi) ) { + /* Paranoia checks */ + if (ioc->alt_ioc != NULL) { + printk(KERN_WARNING MYNAM ": Oops, already bound (%s <==> %s)!\n", + ioc->name, ioc->alt_ioc->name); + break; + } else if (ioc_srch->alt_ioc != NULL) { + printk(KERN_WARNING MYNAM ": Oops, already bound (%s <==> %s)!\n", + ioc_srch->name, ioc_srch->alt_ioc->name); + break; + } + dprintk((KERN_INFO MYNAM ": FOUND! binding %s <==> %s\n", + ioc->name, ioc_srch->name)); + ioc_srch->alt_ioc = ioc; + ioc->alt_ioc = ioc_srch; + break; + } + } +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_adapter_disable - Disable misbehaving MPT adapter. + * @this: Pointer to MPT adapter structure + */ +static void +mpt_adapter_disable(MPT_ADAPTER *ioc) +{ + int sz; + int ret; + + if (ioc->cached_fw != NULL) { + ddlprintk((KERN_INFO MYNAM ": mpt_adapter_disable: Pushing FW onto adapter\n")); + if ((ret = mpt_downloadboot(ioc, NO_SLEEP)) < 0) { + printk(KERN_WARNING MYNAM + ": firmware downloadboot failure (%d)!\n", ret); + } + } + + /* Disable adapter interrupts! */ + CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); + ioc->active = 0; + /* Clear any lingering interrupt */ + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + + if (ioc->alloc != NULL) { + sz = ioc->alloc_sz; + dexitprintk((KERN_INFO MYNAM ": %s.free @ %p, sz=%d bytes\n", + ioc->name, ioc->alloc, ioc->alloc_sz)); + pci_free_consistent(ioc->pcidev, sz, + ioc->alloc, ioc->alloc_dma); + ioc->reply_frames = NULL; + ioc->req_frames = NULL; + ioc->alloc = NULL; + ioc->alloc_total -= sz; + } + + if (ioc->sense_buf_pool != NULL) { + sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); + pci_free_consistent(ioc->pcidev, sz, + ioc->sense_buf_pool, ioc->sense_buf_pool_dma); + ioc->sense_buf_pool = NULL; + ioc->alloc_total -= sz; + } + + if (ioc->events != NULL){ + sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS); + kfree(ioc->events); + ioc->events = NULL; + ioc->alloc_total -= sz; + } + + if (ioc->cached_fw != NULL) { + sz = ioc->facts.FWImageSize; + pci_free_consistent(ioc->pcidev, sz, + ioc->cached_fw, ioc->cached_fw_dma); + ioc->cached_fw = NULL; + ioc->alloc_total -= sz; + } + + if (ioc->spi_data.nvram != NULL) { + kfree(ioc->spi_data.nvram); + ioc->spi_data.nvram = NULL; + } + + if (ioc->spi_data.pIocPg3 != NULL) { + kfree(ioc->spi_data.pIocPg3); + ioc->spi_data.pIocPg3 = NULL; + } + + if (ioc->spi_data.pIocPg4 != NULL) { + sz = ioc->spi_data.IocPg4Sz; + pci_free_consistent(ioc->pcidev, sz, + ioc->spi_data.pIocPg4, + ioc->spi_data.IocPg4_dma); + ioc->spi_data.pIocPg4 = NULL; + ioc->alloc_total -= sz; + } + + if (ioc->ReqToChain != NULL) { + kfree(ioc->ReqToChain); + kfree(ioc->RequestNB); + ioc->ReqToChain = NULL; + } + + if (ioc->ChainToChain != NULL) { + kfree(ioc->ChainToChain); + ioc->ChainToChain = NULL; + } +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_adapter_dispose - Free all resources associated with a MPT + * adapter. + * @ioc: Pointer to MPT adapter structure + * + * This routine unregisters h/w resources and frees all alloc'd memory + * associated with a MPT adapter structure. + */ +static void +mpt_adapter_dispose(MPT_ADAPTER *ioc) +{ + if (ioc != NULL) { + int sz_first, sz_last; + + sz_first = ioc->alloc_total; + + mpt_adapter_disable(ioc); + + if (ioc->pci_irq != -1) { + free_irq(ioc->pci_irq, ioc); + ioc->pci_irq = -1; + } + + if (ioc->memmap != NULL) + iounmap(ioc->memmap); + +#if defined(CONFIG_MTRR) && 0 + if (ioc->mtrr_reg > 0) { + mtrr_del(ioc->mtrr_reg, 0, 0); + dprintk((KERN_INFO MYNAM ": %s: MTRR region de-registered\n", ioc->name)); + } +#endif + + /* Zap the adapter lookup ptr! */ + list_del(&ioc->list); + + sz_last = ioc->alloc_total; + dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n", + ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first)); + kfree(ioc); + } +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * MptDisplayIocCapabilities - Disply IOC's capacilities. + * @ioc: Pointer to MPT adapter structure + */ +static void +MptDisplayIocCapabilities(MPT_ADAPTER *ioc) +{ + int i = 0; + + printk(KERN_INFO "%s: ", ioc->name); + if (ioc->prod_name && strlen(ioc->prod_name) > 3) + printk("%s: ", ioc->prod_name+3); + printk("Capabilities={"); + + if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) { + printk("Initiator"); + i++; + } + + if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { + printk("%sTarget", i ? "," : ""); + i++; + } + + if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { + printk("%sLAN", i ? "," : ""); + i++; + } + +#if 0 + /* + * This would probably evoke more questions than it's worth + */ + if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { + printk("%sLogBusAddr", i ? "," : ""); + i++; + } +#endif + + printk("}\n"); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * MakeIocReady - Get IOC to a READY state, using KickStart if needed. + * @ioc: Pointer to MPT_ADAPTER structure + * @force: Force hard KickStart of IOC + * @sleepFlag: Specifies whether the process can sleep + * + * Returns: + * 1 - DIAG reset and READY + * 0 - READY initially OR soft reset and READY + * -1 - Any failure on KickStart + * -2 - Msg Unit Reset Failed + * -3 - IO Unit Reset Failed + * -4 - IOC owned by a PEER + */ +static int +MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag) +{ + u32 ioc_state; + int statefault = 0; + int cntdn; + int hard_reset_done = 0; + int r; + int ii; + int whoinit; + + /* Get current [raw] IOC state */ + ioc_state = mpt_GetIocState(ioc, 0); + dhsprintk((KERN_INFO MYNAM "::MakeIocReady, %s [raw] state=%08x\n", ioc->name, ioc_state)); + + /* + * Check to see if IOC got left/stuck in doorbell handshake + * grip of death. If so, hard reset the IOC. + */ + if (ioc_state & MPI_DOORBELL_ACTIVE) { + statefault = 1; + printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n", + ioc->name); + } + + /* Is it already READY? */ + if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY) + return 0; + + /* + * Check to see if IOC is in FAULT state. + */ + if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { + statefault = 2; + printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n", + ioc->name); + printk(KERN_WARNING " FAULT code = %04xh\n", + ioc_state & MPI_DOORBELL_DATA_MASK); + } + + /* + * Hmmm... Did it get left operational? + */ + if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) { + dinitprintk((MYIOC_s_WARN_FMT "IOC operational unexpected\n", + ioc->name)); + + /* Check WhoInit. + * If PCI Peer, exit. + * Else, if no fault conditions are present, issue a MessageUnitReset + * Else, fall through to KickStart case + */ + whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT; + dprintk((KERN_WARNING MYNAM + ": whoinit 0x%x\n statefault %d force %d\n", + whoinit, statefault, force)); + if (whoinit == MPI_WHOINIT_PCI_PEER) + return -4; + else { + if ((statefault == 0 ) && (force == 0)) { + if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0) + return 0; + } + statefault = 3; + } + } + + hard_reset_done = KickStart(ioc, statefault||force, sleepFlag); + if (hard_reset_done < 0) + return -1; + + /* + * Loop here waiting for IOC to come READY. + */ + ii = 0; + cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */ + + while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { + if (ioc_state == MPI_IOC_STATE_OPERATIONAL) { + /* + * BIOS or previous driver load left IOC in OP state. + * Reset messaging FIFOs. + */ + if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) { + printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name); + return -2; + } + } else if (ioc_state == MPI_IOC_STATE_RESET) { + /* + * Something is wrong. Try to get IOC back + * to a known state. + */ + if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) { + printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name); + return -3; + } + } + + ii++; cntdn--; + if (!cntdn) { + printk(MYIOC_s_ERR_FMT "Wait IOC_READY state timeout(%d)!\n", + ioc->name, (int)((ii+5)/HZ)); + return -ETIME; + } + + if (sleepFlag == CAN_SLEEP) { + msleep_interruptible(1); + } else { + mdelay (1); /* 1 msec delay */ + } + + } + + if (statefault < 3) { + printk(MYIOC_s_INFO_FMT "Recovered from %s\n", + ioc->name, + statefault==1 ? "stuck handshake" : "IOC FAULT"); + } + + return hard_reset_done; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_GetIocState - Get the current state of a MPT adapter. + * @ioc: Pointer to MPT_ADAPTER structure + * @cooked: Request raw or cooked IOC state + * + * Returns all IOC Doorbell register bits if cooked==0, else just the + * Doorbell bits in MPI_IOC_STATE_MASK. + */ +u32 +mpt_GetIocState(MPT_ADAPTER *ioc, int cooked) +{ + u32 s, sc; + + /* Get! */ + s = CHIPREG_READ32(&ioc->chip->Doorbell); +// dprintk((MYIOC_s_INFO_FMT "raw state = %08x\n", ioc->name, s)); + sc = s & MPI_IOC_STATE_MASK; + + /* Save! */ + ioc->last_state = sc; + + return cooked ? sc : s; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * GetIocFacts - Send IOCFacts request to MPT adapter. + * @ioc: Pointer to MPT_ADAPTER structure + * @sleepFlag: Specifies whether the process can sleep + * @reason: If recovery, only update facts. + * + * Returns 0 for success, non-zero for failure. + */ +static int +GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason) +{ + IOCFacts_t get_facts; + IOCFactsReply_t *facts; + int r; + int req_sz; + int reply_sz; + int sz; + u32 status, vv; + u8 shiftFactor=1; + + /* IOC *must* NOT be in RESET state! */ + if (ioc->last_state == MPI_IOC_STATE_RESET) { + printk(KERN_ERR MYNAM ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n", + ioc->name, + ioc->last_state ); + return -44; + } + + facts = &ioc->facts; + + /* Destination (reply area)... */ + reply_sz = sizeof(*facts); + memset(facts, 0, reply_sz); + + /* Request area (get_facts on the stack right now!) */ + req_sz = sizeof(get_facts); + memset(&get_facts, 0, req_sz); + + get_facts.Function = MPI_FUNCTION_IOC_FACTS; + /* Assert: All other get_facts fields are zero! */ + + dinitprintk((MYIOC_s_INFO_FMT + "Sending get IocFacts request req_sz=%d reply_sz=%d\n", + ioc->name, req_sz, reply_sz)); + + /* No non-zero fields in the get_facts request are greater than + * 1 byte in size, so we can just fire it off as is. + */ + r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts, + reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag); + if (r != 0) + return r; + + /* + * Now byte swap (GRRR) the necessary fields before any further + * inspection of reply contents. + * + * But need to do some sanity checks on MsgLength (byte) field + * to make sure we don't zero IOC's req_sz! + */ + /* Did we get a valid reply? */ + if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) { + if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { + /* + * If not been here, done that, save off first WhoInit value + */ + if (ioc->FirstWhoInit == WHOINIT_UNKNOWN) + ioc->FirstWhoInit = facts->WhoInit; + } + + facts->MsgVersion = le16_to_cpu(facts->MsgVersion); + facts->MsgContext = le32_to_cpu(facts->MsgContext); + facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions); + facts->IOCStatus = le16_to_cpu(facts->IOCStatus); + facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo); + status = facts->IOCStatus & MPI_IOCSTATUS_MASK; + /* CHECKME! IOCStatus, IOCLogInfo */ + + facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth); + facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize); + + /* + * FC f/w version changed between 1.1 and 1.2 + * Old: u16{Major(4),Minor(4),SubMinor(8)} + * New: u32{Major(8),Minor(8),Unit(8),Dev(8)} + */ + if (facts->MsgVersion < 0x0102) { + /* + * Handle old FC f/w style, convert to new... + */ + u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion); + facts->FWVersion.Word = + ((oldv<<12) & 0xFF000000) | + ((oldv<<8) & 0x000FFF00); + } else + facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word); + + facts->ProductID = le16_to_cpu(facts->ProductID); + facts->CurrentHostMfaHighAddr = + le32_to_cpu(facts->CurrentHostMfaHighAddr); + facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits); + facts->CurrentSenseBufferHighAddr = + le32_to_cpu(facts->CurrentSenseBufferHighAddr); + facts->CurReplyFrameSize = + le16_to_cpu(facts->CurReplyFrameSize); + + /* + * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx + * Older MPI-1.00.xx struct had 13 dwords, and enlarged + * to 14 in MPI-1.01.0x. + */ + if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 && + facts->MsgVersion > 0x0100) { + facts->FWImageSize = le32_to_cpu(facts->FWImageSize); + } + + sz = facts->FWImageSize; + if ( sz & 0x01 ) + sz += 1; + if ( sz & 0x02 ) + sz += 2; + facts->FWImageSize = sz; + + if (!facts->RequestFrameSize) { + /* Something is wrong! */ + printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n", + ioc->name); + return -55; + } + + r = sz = le32_to_cpu(facts->BlockSize); + vv = ((63 / (sz * 4)) + 1) & 0x03; + ioc->NB_for_64_byte_frame = vv; + while ( sz ) + { + shiftFactor++; + sz = sz >> 1; + } + ioc->NBShiftFactor = shiftFactor; + dinitprintk((MYIOC_s_INFO_FMT "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n", + ioc->name, vv, shiftFactor, r)); + + if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { + /* + * Set values for this IOC's request & reply frame sizes, + * and request & reply queue depths... + */ + ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4); + ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits); + ioc->reply_sz = MPT_REPLY_FRAME_SIZE; + ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth); + + dinitprintk((MYIOC_s_INFO_FMT "reply_sz=%3d, reply_depth=%4d\n", + ioc->name, ioc->reply_sz, ioc->reply_depth)); + dinitprintk((MYIOC_s_INFO_FMT "req_sz =%3d, req_depth =%4d\n", + ioc->name, ioc->req_sz, ioc->req_depth)); + + /* Get port facts! */ + if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 ) + return r; + } + } else { + printk(MYIOC_s_ERR_FMT + "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n", + ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t, + RequestFrameSize)/sizeof(u32))); + return -66; + } + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * GetPortFacts - Send PortFacts request to MPT adapter. + * @ioc: Pointer to MPT_ADAPTER structure + * @portnum: Port number + * @sleepFlag: Specifies whether the process can sleep + * + * Returns 0 for success, non-zero for failure. + */ +static int +GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag) +{ + PortFacts_t get_pfacts; + PortFactsReply_t *pfacts; + int ii; + int req_sz; + int reply_sz; + + /* IOC *must* NOT be in RESET state! */ + if (ioc->last_state == MPI_IOC_STATE_RESET) { + printk(KERN_ERR MYNAM ": ERROR - Can't get PortFacts, %s NOT READY! (%08x)\n", + ioc->name, + ioc->last_state ); + return -4; + } + + pfacts = &ioc->pfacts[portnum]; + + /* Destination (reply area)... */ + reply_sz = sizeof(*pfacts); + memset(pfacts, 0, reply_sz); + + /* Request area (get_pfacts on the stack right now!) */ + req_sz = sizeof(get_pfacts); + memset(&get_pfacts, 0, req_sz); + + get_pfacts.Function = MPI_FUNCTION_PORT_FACTS; + get_pfacts.PortNumber = portnum; + /* Assert: All other get_pfacts fields are zero! */ + + dinitprintk((MYIOC_s_INFO_FMT "Sending get PortFacts(%d) request\n", + ioc->name, portnum)); + + /* No non-zero fields in the get_pfacts request are greater than + * 1 byte in size, so we can just fire it off as is. + */ + ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts, + reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag); + if (ii != 0) + return ii; + + /* Did we get a valid reply? */ + + /* Now byte swap the necessary fields in the response. */ + pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext); + pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus); + pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo); + pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices); + pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID); + pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags); + pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers); + pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs); + pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets); + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * SendIocInit - Send IOCInit request to MPT adapter. + * @ioc: Pointer to MPT_ADAPTER structure + * @sleepFlag: Specifies whether the process can sleep + * + * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state. + * + * Returns 0 for success, non-zero for failure. + */ +static int +SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) +{ + IOCInit_t ioc_init; + MPIDefaultReply_t init_reply; + u32 state; + int r; + int count; + int cntdn; + + memset(&ioc_init, 0, sizeof(ioc_init)); + memset(&init_reply, 0, sizeof(init_reply)); + + ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER; + ioc_init.Function = MPI_FUNCTION_IOC_INIT; + + /* If we are in a recovery mode and we uploaded the FW image, + * then this pointer is not NULL. Skip the upload a second time. + * Set this flag if cached_fw set for either IOC. + */ + if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) + ioc->upload_fw = 1; + else + ioc->upload_fw = 0; + ddlprintk((MYIOC_s_INFO_FMT "upload_fw %d facts.Flags=%x\n", + ioc->name, ioc->upload_fw, ioc->facts.Flags)); + + if (ioc->bus_type == FC) + ioc_init.MaxDevices = MPT_MAX_FC_DEVICES; + else + ioc_init.MaxDevices = MPT_MAX_SCSI_DEVICES; + + ioc_init.MaxBuses = MPT_MAX_BUS; + + ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */ + + if (sizeof(dma_addr_t) == sizeof(u64)) { + /* Save the upper 32-bits of the request + * (reply) and sense buffers. + */ + ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32)); + ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32)); + } else { + /* Force 32-bit addressing */ + ioc_init.HostMfaHighAddr = cpu_to_le32(0); + ioc_init.SenseBufferHighAddr = cpu_to_le32(0); + } + + ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr; + ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr; + + dhsprintk((MYIOC_s_INFO_FMT "Sending IOCInit (req @ %p)\n", + ioc->name, &ioc_init)); + + r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init, + sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag); + if (r != 0) + return r; + + /* No need to byte swap the multibyte fields in the reply + * since we don't even look at it's contents. + */ + + dhsprintk((MYIOC_s_INFO_FMT "Sending PortEnable (req @ %p)\n", + ioc->name, &ioc_init)); + + if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) + return r; + + /* YIKES! SUPER IMPORTANT!!! + * Poll IocState until _OPERATIONAL while IOC is doing + * LoopInit and TargetDiscovery! + */ + count = 0; + cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */ + state = mpt_GetIocState(ioc, 1); + while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) { + if (sleepFlag == CAN_SLEEP) { + msleep_interruptible(1); + } else { + mdelay(1); + } + + if (!cntdn) { + printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n", + ioc->name, (int)((count+5)/HZ)); + return -9; + } + + state = mpt_GetIocState(ioc, 1); + count++; + } + dhsprintk((MYIOC_s_INFO_FMT "INFO - Wait IOC_OPERATIONAL state (cnt=%d)\n", + ioc->name, count)); + + return r; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * SendPortEnable - Send PortEnable request to MPT adapter port. + * @ioc: Pointer to MPT_ADAPTER structure + * @portnum: Port number to enable + * @sleepFlag: Specifies whether the process can sleep + * + * Send PortEnable to bring IOC to OPERATIONAL state. + * + * Returns 0 for success, non-zero for failure. + */ +static int +SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) +{ + PortEnable_t port_enable; + MPIDefaultReply_t reply_buf; + int ii; + int req_sz; + int reply_sz; + + /* Destination... */ + reply_sz = sizeof(MPIDefaultReply_t); + memset(&reply_buf, 0, reply_sz); + + req_sz = sizeof(PortEnable_t); + memset(&port_enable, 0, req_sz); + + port_enable.Function = MPI_FUNCTION_PORT_ENABLE; + port_enable.PortNumber = portnum; +/* port_enable.ChainOffset = 0; */ +/* port_enable.MsgFlags = 0; */ +/* port_enable.MsgContext = 0; */ + + dinitprintk((MYIOC_s_INFO_FMT "Sending Port(%d)Enable (req @ %p)\n", + ioc->name, portnum, &port_enable)); + + /* RAID FW may take a long time to enable + */ + if (ioc->bus_type == FC) { + ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable, + reply_sz, (u16*)&reply_buf, 65 /*seconds*/, sleepFlag); + } else { + ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable, + reply_sz, (u16*)&reply_buf, 300 /*seconds*/, sleepFlag); + } + + if (ii != 0) + return ii; + + /* We do not even look at the reply, so we need not + * swap the multi-byte fields. + */ + + return 0; +} + +/* + * ioc: Pointer to MPT_ADAPTER structure + * size - total FW bytes + */ +void +mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size) +{ + if (ioc->cached_fw) + return; /* use already allocated memory */ + if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { + ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */ + ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma; + } else { + if ( (ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma) ) ) + ioc->alloc_total += size; + } +} +/* + * If alt_img is NULL, delete from ioc structure. + * Else, delete a secondary image in same format. + */ +void +mpt_free_fw_memory(MPT_ADAPTER *ioc) +{ + int sz; + + sz = ioc->facts.FWImageSize; + dinitprintk((KERN_WARNING MYNAM "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n", + ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); + pci_free_consistent(ioc->pcidev, sz, + ioc->cached_fw, ioc->cached_fw_dma); + ioc->cached_fw = NULL; + + return; +} + + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port. + * @ioc: Pointer to MPT_ADAPTER structure + * @sleepFlag: Specifies whether the process can sleep + * + * Returns 0 for success, >0 for handshake failure + * <0 for fw upload failure. + * + * Remark: If bound IOC and a successful FWUpload was performed + * on the bound IOC, the second image is discarded + * and memory is free'd. Both channels must upload to prevent + * IOC from running in degraded mode. + */ +static int +mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag) +{ + u8 request[ioc->req_sz]; + u8 reply[sizeof(FWUploadReply_t)]; + FWUpload_t *prequest; + FWUploadReply_t *preply; + FWUploadTCSGE_t *ptcsge; + int sgeoffset; + u32 flagsLength; + int ii, sz, reply_sz; + int cmdStatus; + + /* If the image size is 0, we are done. + */ + if ((sz = ioc->facts.FWImageSize) == 0) + return 0; + + mpt_alloc_fw_memory(ioc, sz); + + dinitprintk((KERN_WARNING MYNAM ": FW Image @ %p[%p], sz=%d[%x] bytes\n", + ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); + + if (ioc->cached_fw == NULL) { + /* Major Failure. + */ + return -ENOMEM; + } + + prequest = (FWUpload_t *)&request; + preply = (FWUploadReply_t *)&reply; + + /* Destination... */ + memset(prequest, 0, ioc->req_sz); + + reply_sz = sizeof(reply); + memset(preply, 0, reply_sz); + + prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM; + prequest->Function = MPI_FUNCTION_FW_UPLOAD; + + ptcsge = (FWUploadTCSGE_t *) &prequest->SGL; + ptcsge->DetailsLength = 12; + ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT; + ptcsge->ImageSize = cpu_to_le32(sz); + + sgeoffset = sizeof(FWUpload_t) - sizeof(SGE_MPI_UNION) + sizeof(FWUploadTCSGE_t); + + flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz; + mpt_add_sge(&request[sgeoffset], flagsLength, ioc->cached_fw_dma); + + sgeoffset += sizeof(u32) + sizeof(dma_addr_t); + dinitprintk((KERN_WARNING MYNAM "Sending FW Upload (req @ %p) sgeoffset=%d \n", + prequest, sgeoffset)); + DBG_DUMP_FW_REQUEST_FRAME(prequest) + + ii = mpt_handshake_req_reply_wait(ioc, sgeoffset, (u32*)prequest, + reply_sz, (u16*)preply, 65 /*seconds*/, sleepFlag); + + dinitprintk((KERN_WARNING MYNAM "FW Upload completed rc=%x \n", ii)); + + cmdStatus = -EFAULT; + if (ii == 0) { + /* Handshake transfer was complete and successful. + * Check the Reply Frame. + */ + int status, transfer_sz; + status = le16_to_cpu(preply->IOCStatus); + if (status == MPI_IOCSTATUS_SUCCESS) { + transfer_sz = le32_to_cpu(preply->ActualImageSize); + if (transfer_sz == sz) + cmdStatus = 0; + } + } + dinitprintk((MYIOC_s_INFO_FMT ": do_upload status %d \n", + ioc->name, cmdStatus)); + + + if (cmdStatus) { + + ddlprintk((MYIOC_s_INFO_FMT ": fw upload failed, freeing image \n", + ioc->name)); + mpt_free_fw_memory(ioc); + } + + return cmdStatus; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_downloadboot - DownloadBoot code + * @ioc: Pointer to MPT_ADAPTER structure + * @flag: Specify which part of IOC memory is to be uploaded. + * @sleepFlag: Specifies whether the process can sleep + * + * FwDownloadBoot requires Programmed IO access. + * + * Returns 0 for success + * -1 FW Image size is 0 + * -2 No valid cached_fw Pointer + * <0 for fw upload failure. + */ +static int +mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag) +{ + MpiFwHeader_t *pFwHeader; + MpiExtImageHeader_t *pExtImage; + u32 fwSize; + u32 diag0val; + int count; + u32 *ptrFw; + u32 diagRwData; + u32 nextImage; + u32 load_addr; + u32 ioc_state=0; + + ddlprintk((MYIOC_s_INFO_FMT "downloadboot: fw size 0x%x, ioc FW Ptr %p\n", + ioc->name, ioc->facts.FWImageSize, ioc->cached_fw)); + + if ( ioc->facts.FWImageSize == 0 ) + return -1; + + if (ioc->cached_fw == NULL) + return -2; + + /* prevent a second downloadboot and memory free with alt_ioc */ + if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) + ioc->alt_ioc->cached_fw = NULL; + + CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); + + CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM)); + + /* wait 1 msec */ + if (sleepFlag == CAN_SLEEP) { + msleep_interruptible(1); + } else { + mdelay (1); + } + + diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); + CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); + + for (count = 0; count < 30; count ++) { + diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); + if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { + ddlprintk((MYIOC_s_INFO_FMT "RESET_ADAPTER cleared, count=%d\n", + ioc->name, count)); + break; + } + /* wait 1 sec */ + if (sleepFlag == CAN_SLEEP) { + msleep_interruptible (1000); + } else { + mdelay (1000); + } + } + + if ( count == 30 ) { + ddlprintk((MYIOC_s_INFO_FMT "downloadboot failed! Unable to RESET_ADAPTER diag0val=%x\n", + ioc->name, diag0val)); + return -3; + } + + CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); + + /* Set the DiagRwEn and Disable ARM bits */ + CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM)); + + pFwHeader = (MpiFwHeader_t *) ioc->cached_fw; + fwSize = (pFwHeader->ImageSize + 3)/4; + ptrFw = (u32 *) pFwHeader; + + /* Write the LoadStartAddress to the DiagRw Address Register + * using Programmed IO + */ + CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress); + ddlprintk((MYIOC_s_INFO_FMT "LoadStart addr written 0x%x \n", + ioc->name, pFwHeader->LoadStartAddress)); + + ddlprintk((MYIOC_s_INFO_FMT "Write FW Image: 0x%x bytes @ %p\n", + ioc->name, fwSize*4, ptrFw)); + while (fwSize--) { + CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); + } + + nextImage = pFwHeader->NextImageHeaderOffset; + while (nextImage) { + pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage); + + load_addr = pExtImage->LoadStartAddress; + + fwSize = (pExtImage->ImageSize + 3) >> 2; + ptrFw = (u32 *)pExtImage; + + ddlprintk((MYIOC_s_INFO_FMT "Write Ext Image: 0x%x bytes @ %p load_addr=%x\n", + ioc->name, fwSize*4, ptrFw, load_addr)); + CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr); + + while (fwSize--) { + CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); + } + nextImage = pExtImage->NextImageHeaderOffset; + } + + /* Write the IopResetVectorRegAddr */ + ddlprintk((MYIOC_s_INFO_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr)); + CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr); + + /* Write the IopResetVectorValue */ + ddlprintk((MYIOC_s_INFO_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue)); + CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue); + + /* Clear the internal flash bad bit - autoincrementing register, + * so must do two writes. + */ + CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); + diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData); + diagRwData |= 0x4000000; + CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); + CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData); + + diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); + ddlprintk((MYIOC_s_INFO_FMT "downloadboot diag0val=%x, turning off PREVENT_IOC_BOOT, DISABLE_ARM\n", + ioc->name, diag0val)); + diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM); + ddlprintk((MYIOC_s_INFO_FMT "downloadboot now diag0val=%x\n", + ioc->name, diag0val)); + CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); + + /* Write 0xFF to reset the sequencer */ + CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); + + for (count=0; count<HZ*20; count++) { + if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) { + ddlprintk((MYIOC_s_INFO_FMT "downloadboot successful! (count=%d) IocState=%x\n", + ioc->name, count, ioc_state)); + if ((SendIocInit(ioc, sleepFlag)) != 0) { + ddlprintk((MYIOC_s_INFO_FMT "downloadboot: SendIocInit failed\n", + ioc->name)); + return -EFAULT; + } + ddlprintk((MYIOC_s_INFO_FMT "downloadboot: SendIocInit successful\n", + ioc->name)); + return 0; + } + if (sleepFlag == CAN_SLEEP) { + msleep_interruptible (10); + } else { + mdelay (10); + } + } + ddlprintk((MYIOC_s_INFO_FMT "downloadboot failed! IocState=%x\n", + ioc->name, ioc_state)); + return -EFAULT; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * KickStart - Perform hard reset of MPT adapter. + * @ioc: Pointer to MPT_ADAPTER structure + * @force: Force hard reset + * @sleepFlag: Specifies whether the process can sleep + * + * This routine places MPT adapter in diagnostic mode via the + * WriteSequence register, and then performs a hard reset of adapter + * via the Diagnostic register. + * + * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread) + * or NO_SLEEP (interrupt thread, use mdelay) + * force - 1 if doorbell active, board fault state + * board operational, IOC_RECOVERY or + * IOC_BRINGUP and there is an alt_ioc. + * 0 else + * + * Returns: + * 1 - hard reset, READY + * 0 - no reset due to History bit, READY + * -1 - no reset due to History bit but not READY + * OR reset but failed to come READY + * -2 - no reset, could not enter DIAG mode + * -3 - reset but bad FW bit + */ +static int +KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) +{ + int hard_reset_done = 0; + u32 ioc_state=0; + int cnt,cntdn; + + dinitprintk((KERN_WARNING MYNAM ": KickStarting %s!\n", ioc->name)); + if (ioc->bus_type == SCSI) { + /* Always issue a Msg Unit Reset first. This will clear some + * SCSI bus hang conditions. + */ + SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); + + if (sleepFlag == CAN_SLEEP) { + msleep_interruptible (1000); + } else { + mdelay (1000); + } + } + + hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag); + if (hard_reset_done < 0) + return hard_reset_done; + + dinitprintk((MYIOC_s_INFO_FMT "Diagnostic reset successful!\n", + ioc->name)); + + cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */ + for (cnt=0; cnt<cntdn; cnt++) { + ioc_state = mpt_GetIocState(ioc, 1); + if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) { + dinitprintk((MYIOC_s_INFO_FMT "KickStart successful! (cnt=%d)\n", + ioc->name, cnt)); + return hard_reset_done; + } + if (sleepFlag == CAN_SLEEP) { + msleep_interruptible (10); + } else { + mdelay (10); + } + } + + printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n", + ioc->name, ioc_state); + return -1; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_diag_reset - Perform hard reset of the adapter. + * @ioc: Pointer to MPT_ADAPTER structure + * @ignore: Set if to honor and clear to ignore + * the reset history bit + * @sleepflag: CAN_SLEEP if called in a non-interrupt thread, + * else set to NO_SLEEP (use mdelay instead) + * + * This routine places the adapter in diagnostic mode via the + * WriteSequence register and then performs a hard reset of adapter + * via the Diagnostic register. Adapter should be in ready state + * upon successful completion. + * + * Returns: 1 hard reset successful + * 0 no reset performed because reset history bit set + * -2 enabling diagnostic mode failed + * -3 diagnostic reset failed + */ +static int +mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) +{ + u32 diag0val; + u32 doorbell; + int hard_reset_done = 0; + int count = 0; +#ifdef MPT_DEBUG + u32 diag1val = 0; +#endif + + /* Clear any existing interrupts */ + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + + /* Use "Diagnostic reset" method! (only thing available!) */ + diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); + +#ifdef MPT_DEBUG + if (ioc->alt_ioc) + diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); + dprintk((MYIOC_s_INFO_FMT "DbG1: diag0=%08x, diag1=%08x\n", + ioc->name, diag0val, diag1val)); +#endif + + /* Do the reset if we are told to ignore the reset history + * or if the reset history is 0 + */ + if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) { + while ((diag0val & MPI_DIAG_DRWE) == 0) { + /* Write magic sequence to WriteSequence register + * Loop until in diagnostic mode + */ + CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); + + /* wait 100 msec */ + if (sleepFlag == CAN_SLEEP) { + msleep_interruptible (100); + } else { + mdelay (100); + } + + count++; + if (count > 20) { + printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", + ioc->name, diag0val); + return -2; + + } + + diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); + + dprintk((MYIOC_s_INFO_FMT "Wrote magic DiagWriteEn sequence (%x)\n", + ioc->name, diag0val)); + } + +#ifdef MPT_DEBUG + if (ioc->alt_ioc) + diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); + dprintk((MYIOC_s_INFO_FMT "DbG2: diag0=%08x, diag1=%08x\n", + ioc->name, diag0val, diag1val)); +#endif + /* + * Disable the ARM (Bug fix) + * + */ + CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM); + mdelay (1); + + /* + * Now hit the reset bit in the Diagnostic register + * (THE BIG HAMMER!) (Clears DRWE bit). + */ + CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); + hard_reset_done = 1; + dprintk((MYIOC_s_INFO_FMT "Diagnostic reset performed\n", + ioc->name)); + + /* + * Call each currently registered protocol IOC reset handler + * with pre-reset indication. + * NOTE: If we're doing _IOC_BRINGUP, there can be no + * MptResetHandlers[] registered yet. + */ + { + int ii; + int r = 0; + + for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) { + if (MptResetHandlers[ii]) { + dprintk((MYIOC_s_INFO_FMT "Calling IOC pre_reset handler #%d\n", + ioc->name, ii)); + r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_PRE_RESET); + if (ioc->alt_ioc) { + dprintk((MYIOC_s_INFO_FMT "Calling alt-%s pre_reset handler #%d\n", + ioc->name, ioc->alt_ioc->name, ii)); + r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_PRE_RESET); + } + } + } + /* FIXME? Examine results here? */ + } + + if (ioc->cached_fw) { + /* If the DownloadBoot operation fails, the + * IOC will be left unusable. This is a fatal error + * case. _diag_reset will return < 0 + */ + for (count = 0; count < 30; count ++) { + diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); + if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { + break; + } + + /* wait 1 sec */ + if (sleepFlag == CAN_SLEEP) { + ssleep(1); + } else { + mdelay (1000); + } + } + if ((count = mpt_downloadboot(ioc, sleepFlag)) < 0) { + printk(KERN_WARNING MYNAM + ": firmware downloadboot failure (%d)!\n", count); + } + + } else { + /* Wait for FW to reload and for board + * to go to the READY state. + * Maximum wait is 60 seconds. + * If fail, no error will check again + * with calling program. + */ + for (count = 0; count < 60; count ++) { + doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); + doorbell &= MPI_IOC_STATE_MASK; + + if (doorbell == MPI_IOC_STATE_READY) { + break; + } + + /* wait 1 sec */ + if (sleepFlag == CAN_SLEEP) { + msleep_interruptible (1000); + } else { + mdelay (1000); + } + } + } + } + + diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); +#ifdef MPT_DEBUG + if (ioc->alt_ioc) + diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); + dprintk((MYIOC_s_INFO_FMT "DbG3: diag0=%08x, diag1=%08x\n", + ioc->name, diag0val, diag1val)); +#endif + + /* Clear RESET_HISTORY bit! Place board in the + * diagnostic mode to update the diag register. + */ + diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); + count = 0; + while ((diag0val & MPI_DIAG_DRWE) == 0) { + /* Write magic sequence to WriteSequence register + * Loop until in diagnostic mode + */ + CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); + CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); + + /* wait 100 msec */ + if (sleepFlag == CAN_SLEEP) { + msleep_interruptible (100); + } else { + mdelay (100); + } + + count++; + if (count > 20) { + printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", + ioc->name, diag0val); + break; + } + diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); + } + diag0val &= ~MPI_DIAG_RESET_HISTORY; + CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); + diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); + if (diag0val & MPI_DIAG_RESET_HISTORY) { + printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n", + ioc->name); + } + + /* Disable Diagnostic Mode + */ + CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF); + + /* Check FW reload status flags. + */ + diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); + if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) { + printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n", + ioc->name, diag0val); + return -3; + } + +#ifdef MPT_DEBUG + if (ioc->alt_ioc) + diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); + dprintk((MYIOC_s_INFO_FMT "DbG4: diag0=%08x, diag1=%08x\n", + ioc->name, diag0val, diag1val)); +#endif + + /* + * Reset flag that says we've enabled event notification + */ + ioc->facts.EventState = 0; + + if (ioc->alt_ioc) + ioc->alt_ioc->facts.EventState = 0; + + return hard_reset_done; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * SendIocReset - Send IOCReset request to MPT adapter. + * @ioc: Pointer to MPT_ADAPTER structure + * @reset_type: reset type, expected values are + * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET + * + * Send IOCReset request to the MPT adapter. + * + * Returns 0 for success, non-zero for failure. + */ +static int +SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag) +{ + int r; + u32 state; + int cntdn, count; + + drsprintk((KERN_WARNING MYNAM ": %s: Sending IOC reset(0x%02x)!\n", + ioc->name, reset_type)); + CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT); + if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) + return r; + + /* FW ACK'd request, wait for READY state + */ + count = 0; + cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */ + + while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { + cntdn--; + count++; + if (!cntdn) { + if (sleepFlag != CAN_SLEEP) + count *= 10; + + printk(KERN_ERR MYNAM ": %s: ERROR - Wait IOC_READY state timeout(%d)!\n", + ioc->name, (int)((count+5)/HZ)); + return -ETIME; + } + + if (sleepFlag == CAN_SLEEP) { + msleep_interruptible(1); + } else { + mdelay (1); /* 1 msec delay */ + } + } + + /* TODO! + * Cleanup all event stuff for this IOC; re-issue EventNotification + * request if needed. + */ + if (ioc->facts.Function) + ioc->facts.EventState = 0; + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * initChainBuffers - Allocate memory for and initialize + * chain buffers, chain buffer control arrays and spinlock. + * @hd: Pointer to MPT_SCSI_HOST structure + * @init: If set, initialize the spin lock. + */ +static int +initChainBuffers(MPT_ADAPTER *ioc) +{ + u8 *mem; + int sz, ii, num_chain; + int scale, num_sge, numSGE; + + /* ReqToChain size must equal the req_depth + * index = req_idx + */ + if (ioc->ReqToChain == NULL) { + sz = ioc->req_depth * sizeof(int); + mem = kmalloc(sz, GFP_ATOMIC); + if (mem == NULL) + return -1; + + ioc->ReqToChain = (int *) mem; + dinitprintk((KERN_INFO MYNAM ": %s ReqToChain alloc @ %p, sz=%d bytes\n", + ioc->name, mem, sz)); + mem = kmalloc(sz, GFP_ATOMIC); + if (mem == NULL) + return -1; + + ioc->RequestNB = (int *) mem; + dinitprintk((KERN_INFO MYNAM ": %s RequestNB alloc @ %p, sz=%d bytes\n", + ioc->name, mem, sz)); + } + for (ii = 0; ii < ioc->req_depth; ii++) { + ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN; + } + + /* ChainToChain size must equal the total number + * of chain buffers to be allocated. + * index = chain_idx + * + * Calculate the number of chain buffers needed(plus 1) per I/O + * then multiply the the maximum number of simultaneous cmds + * + * num_sge = num sge in request frame + last chain buffer + * scale = num sge per chain buffer if no chain element + */ + scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32)); + if (sizeof(dma_addr_t) == sizeof(u64)) + num_sge = scale + (ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32)); + else + num_sge = 1+ scale + (ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32)); + + if (sizeof(dma_addr_t) == sizeof(u64)) { + numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale + + (ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32)); + } else { + numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale + + (ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32)); + } + dinitprintk((KERN_INFO MYNAM ": %s num_sge=%d numSGE=%d\n", + ioc->name, num_sge, numSGE)); + + if ( numSGE > MPT_SCSI_SG_DEPTH ) + numSGE = MPT_SCSI_SG_DEPTH; + + num_chain = 1; + while (numSGE - num_sge > 0) { + num_chain++; + num_sge += (scale - 1); + } + num_chain++; + + dinitprintk((KERN_INFO MYNAM ": %s Now numSGE=%d num_sge=%d num_chain=%d\n", + ioc->name, numSGE, num_sge, num_chain)); + + if (ioc->bus_type == SCSI) + num_chain *= MPT_SCSI_CAN_QUEUE; + else + num_chain *= MPT_FC_CAN_QUEUE; + + ioc->num_chain = num_chain; + + sz = num_chain * sizeof(int); + if (ioc->ChainToChain == NULL) { + mem = kmalloc(sz, GFP_ATOMIC); + if (mem == NULL) + return -1; + + ioc->ChainToChain = (int *) mem; + dinitprintk((KERN_INFO MYNAM ": %s ChainToChain alloc @ %p, sz=%d bytes\n", + ioc->name, mem, sz)); + } else { + mem = (u8 *) ioc->ChainToChain; + } + memset(mem, 0xFF, sz); + return num_chain; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * PrimeIocFifos - Initialize IOC request and reply FIFOs. + * @ioc: Pointer to MPT_ADAPTER structure + * + * This routine allocates memory for the MPT reply and request frame + * pools (if necessary), and primes the IOC reply FIFO with + * reply frames. + * + * Returns 0 for success, non-zero for failure. + */ +static int +PrimeIocFifos(MPT_ADAPTER *ioc) +{ + MPT_FRAME_HDR *mf; + unsigned long flags; + dma_addr_t alloc_dma; + u8 *mem; + int i, reply_sz, sz, total_size, num_chain; + + /* Prime reply FIFO... */ + + if (ioc->reply_frames == NULL) { + if ( (num_chain = initChainBuffers(ioc)) < 0) + return -1; + + total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth); + dinitprintk((KERN_INFO MYNAM ": %s.ReplyBuffer sz=%d bytes, ReplyDepth=%d\n", + ioc->name, ioc->reply_sz, ioc->reply_depth)); + dinitprintk((KERN_INFO MYNAM ": %s.ReplyBuffer sz=%d[%x] bytes\n", + ioc->name, reply_sz, reply_sz)); + + sz = (ioc->req_sz * ioc->req_depth); + dinitprintk((KERN_INFO MYNAM ": %s.RequestBuffer sz=%d bytes, RequestDepth=%d\n", + ioc->name, ioc->req_sz, ioc->req_depth)); + dinitprintk((KERN_INFO MYNAM ": %s.RequestBuffer sz=%d[%x] bytes\n", + ioc->name, sz, sz)); + total_size += sz; + + sz = num_chain * ioc->req_sz; /* chain buffer pool size */ + dinitprintk((KERN_INFO MYNAM ": %s.ChainBuffer sz=%d bytes, ChainDepth=%d\n", + ioc->name, ioc->req_sz, num_chain)); + dinitprintk((KERN_INFO MYNAM ": %s.ChainBuffer sz=%d[%x] bytes num_chain=%d\n", + ioc->name, sz, sz, num_chain)); + + total_size += sz; + mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma); + if (mem == NULL) { + printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n", + ioc->name); + goto out_fail; + } + + dinitprintk((KERN_INFO MYNAM ": %s.Total alloc @ %p[%p], sz=%d[%x] bytes\n", + ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size)); + + memset(mem, 0, total_size); + ioc->alloc_total += total_size; + ioc->alloc = mem; + ioc->alloc_dma = alloc_dma; + ioc->alloc_sz = total_size; + ioc->reply_frames = (MPT_FRAME_HDR *) mem; + ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); + + alloc_dma += reply_sz; + mem += reply_sz; + + /* Request FIFO - WE manage this! */ + + ioc->req_frames = (MPT_FRAME_HDR *) mem; + ioc->req_frames_dma = alloc_dma; + + dinitprintk((KERN_INFO MYNAM ": %s.RequestBuffers @ %p[%p]\n", + ioc->name, mem, (void *)(ulong)alloc_dma)); + + ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); + +#if defined(CONFIG_MTRR) && 0 + /* + * Enable Write Combining MTRR for IOC's memory region. + * (at least as much as we can; "size and base must be + * multiples of 4 kiB" + */ + ioc->mtrr_reg = mtrr_add(ioc->req_frames_dma, + sz, + MTRR_TYPE_WRCOMB, 1); + dprintk((MYIOC_s_INFO_FMT "MTRR region registered (base:size=%08x:%x)\n", + ioc->name, ioc->req_frames_dma, sz)); +#endif + + for (i = 0; i < ioc->req_depth; i++) { + alloc_dma += ioc->req_sz; + mem += ioc->req_sz; + } + + ioc->ChainBuffer = mem; + ioc->ChainBufferDMA = alloc_dma; + + dinitprintk((KERN_INFO MYNAM " :%s.ChainBuffers @ %p(%p)\n", + ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA)); + + /* Initialize the free chain Q. + */ + + INIT_LIST_HEAD(&ioc->FreeChainQ); + + /* Post the chain buffers to the FreeChainQ. + */ + mem = (u8 *)ioc->ChainBuffer; + for (i=0; i < num_chain; i++) { + mf = (MPT_FRAME_HDR *) mem; + list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ); + mem += ioc->req_sz; + } + + /* Initialize Request frames linked list + */ + alloc_dma = ioc->req_frames_dma; + mem = (u8 *) ioc->req_frames; + + spin_lock_irqsave(&ioc->FreeQlock, flags); + INIT_LIST_HEAD(&ioc->FreeQ); + for (i = 0; i < ioc->req_depth; i++) { + mf = (MPT_FRAME_HDR *) mem; + + /* Queue REQUESTs *internally*! */ + list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ); + + mem += ioc->req_sz; + } + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + + sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); + ioc->sense_buf_pool = + pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma); + if (ioc->sense_buf_pool == NULL) { + printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n", + ioc->name); + goto out_fail; + } + + ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF); + ioc->alloc_total += sz; + dinitprintk((KERN_INFO MYNAM ": %s.SenseBuffers @ %p[%p]\n", + ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma)); + + } + + /* Post Reply frames to FIFO + */ + alloc_dma = ioc->alloc_dma; + dinitprintk((KERN_INFO MYNAM ": %s.ReplyBuffers @ %p[%p]\n", + ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); + + for (i = 0; i < ioc->reply_depth; i++) { + /* Write each address to the IOC! */ + CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma); + alloc_dma += ioc->reply_sz; + } + + return 0; + +out_fail: + if (ioc->alloc != NULL) { + sz = ioc->alloc_sz; + pci_free_consistent(ioc->pcidev, + sz, + ioc->alloc, ioc->alloc_dma); + ioc->reply_frames = NULL; + ioc->req_frames = NULL; + ioc->alloc_total -= sz; + } + if (ioc->sense_buf_pool != NULL) { + sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); + pci_free_consistent(ioc->pcidev, + sz, + ioc->sense_buf_pool, ioc->sense_buf_pool_dma); + ioc->sense_buf_pool = NULL; + } + return -1; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_handshake_req_reply_wait - Send MPT request to and receive reply + * from IOC via doorbell handshake method. + * @ioc: Pointer to MPT_ADAPTER structure + * @reqBytes: Size of the request in bytes + * @req: Pointer to MPT request frame + * @replyBytes: Expected size of the reply in bytes + * @u16reply: Pointer to area where reply should be written + * @maxwait: Max wait time for a reply (in seconds) + * @sleepFlag: Specifies whether the process can sleep + * + * NOTES: It is the callers responsibility to byte-swap fields in the + * request which are greater than 1 byte in size. It is also the + * callers responsibility to byte-swap response fields which are + * greater than 1 byte in size. + * + * Returns 0 for success, non-zero for failure. + */ +static int +mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req, + int replyBytes, u16 *u16reply, int maxwait, int sleepFlag) +{ + MPIDefaultReply_t *mptReply; + int failcnt = 0; + int t; + + /* + * Get ready to cache a handshake reply + */ + ioc->hs_reply_idx = 0; + mptReply = (MPIDefaultReply_t *) ioc->hs_reply; + mptReply->MsgLength = 0; + + /* + * Make sure there are no doorbells (WRITE 0 to IntStatus reg), + * then tell IOC that we want to handshake a request of N words. + * (WRITE u32val to Doorbell reg). + */ + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + CHIPREG_WRITE32(&ioc->chip->Doorbell, + ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | + ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); + + /* + * Wait for IOC's doorbell handshake int + */ + if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) + failcnt++; + + dhsprintk((MYIOC_s_INFO_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n", + ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); + + /* Read doorbell and check for active bit */ + if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) + return -1; + + /* + * Clear doorbell int (WRITE 0 to IntStatus reg), + * then wait for IOC to ACKnowledge that it's ready for + * our handshake request. + */ + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) + failcnt++; + + if (!failcnt) { + int ii; + u8 *req_as_bytes = (u8 *) req; + + /* + * Stuff request words via doorbell handshake, + * with ACK from IOC for each. + */ + for (ii = 0; !failcnt && ii < reqBytes/4; ii++) { + u32 word = ((req_as_bytes[(ii*4) + 0] << 0) | + (req_as_bytes[(ii*4) + 1] << 8) | + (req_as_bytes[(ii*4) + 2] << 16) | + (req_as_bytes[(ii*4) + 3] << 24)); + + CHIPREG_WRITE32(&ioc->chip->Doorbell, word); + if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) + failcnt++; + } + + dhsprintk((KERN_INFO MYNAM ": Handshake request frame (@%p) header\n", req)); + DBG_DUMP_REQUEST_FRAME_HDR(req) + + dhsprintk((MYIOC_s_INFO_FMT "HandShake request post done, WaitCnt=%d%s\n", + ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : "")); + + /* + * Wait for completion of doorbell handshake reply from the IOC + */ + if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0) + failcnt++; + + dhsprintk((MYIOC_s_INFO_FMT "HandShake reply count=%d%s\n", + ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : "")); + + /* + * Copy out the cached reply... + */ + for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++) + u16reply[ii] = ioc->hs_reply[ii]; + } else { + return -99; + } + + return -failcnt; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * WaitForDoorbellAck - Wait for IOC to clear the IOP_DOORBELL_STATUS bit + * in it's IntStatus register. + * @ioc: Pointer to MPT_ADAPTER structure + * @howlong: How long to wait (in seconds) + * @sleepFlag: Specifies whether the process can sleep + * + * This routine waits (up to ~2 seconds max) for IOC doorbell + * handshake ACKnowledge. + * + * Returns a negative value on failure, else wait loop count. + */ +static int +WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) +{ + int cntdn; + int count = 0; + u32 intstat=0; + + cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * howlong; + + if (sleepFlag == CAN_SLEEP) { + while (--cntdn) { + intstat = CHIPREG_READ32(&ioc->chip->IntStatus); + if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) + break; + msleep_interruptible (1); + count++; + } + } else { + while (--cntdn) { + intstat = CHIPREG_READ32(&ioc->chip->IntStatus); + if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) + break; + mdelay (1); + count++; + } + } + + if (cntdn) { + dprintk((MYIOC_s_INFO_FMT "WaitForDoorbell ACK (count=%d)\n", + ioc->name, count)); + return count; + } + + printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n", + ioc->name, count, intstat); + return -1; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * WaitForDoorbellInt - Wait for IOC to set the HIS_DOORBELL_INTERRUPT bit + * in it's IntStatus register. + * @ioc: Pointer to MPT_ADAPTER structure + * @howlong: How long to wait (in seconds) + * @sleepFlag: Specifies whether the process can sleep + * + * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt. + * + * Returns a negative value on failure, else wait loop count. + */ +static int +WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) +{ + int cntdn; + int count = 0; + u32 intstat=0; + + cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * howlong; + if (sleepFlag == CAN_SLEEP) { + while (--cntdn) { + intstat = CHIPREG_READ32(&ioc->chip->IntStatus); + if (intstat & MPI_HIS_DOORBELL_INTERRUPT) + break; + msleep_interruptible(1); + count++; + } + } else { + while (--cntdn) { + intstat = CHIPREG_READ32(&ioc->chip->IntStatus); + if (intstat & MPI_HIS_DOORBELL_INTERRUPT) + break; + mdelay(1); + count++; + } + } + + if (cntdn) { + dprintk((MYIOC_s_INFO_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n", + ioc->name, count, howlong)); + return count; + } + + printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n", + ioc->name, count, intstat); + return -1; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * WaitForDoorbellReply - Wait for and capture a IOC handshake reply. + * @ioc: Pointer to MPT_ADAPTER structure + * @howlong: How long to wait (in seconds) + * @sleepFlag: Specifies whether the process can sleep + * + * This routine polls the IOC for a handshake reply, 16 bits at a time. + * Reply is cached to IOC private area large enough to hold a maximum + * of 128 bytes of reply data. + * + * Returns a negative value on failure, else size of reply in WORDS. + */ +static int +WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag) +{ + int u16cnt = 0; + int failcnt = 0; + int t; + u16 *hs_reply = ioc->hs_reply; + volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply; + u16 hword; + + hs_reply[0] = hs_reply[1] = hs_reply[7] = 0; + + /* + * Get first two u16's so we can look at IOC's intended reply MsgLength + */ + u16cnt=0; + if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) { + failcnt++; + } else { + hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) + failcnt++; + else { + hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + } + } + + dhsprintk((MYIOC_s_INFO_FMT "WaitCnt=%d First handshake reply word=%08x%s\n", + ioc->name, t, le32_to_cpu(*(u32 *)hs_reply), + failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); + + /* + * If no error (and IOC said MsgLength is > 0), piece together + * reply 16 bits at a time. + */ + for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) { + if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) + failcnt++; + hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); + /* don't overflow our IOC hs_reply[] buffer! */ + if (u16cnt < sizeof(ioc->hs_reply) / sizeof(ioc->hs_reply[0])) + hs_reply[u16cnt] = hword; + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + } + + if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) + failcnt++; + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + + if (failcnt) { + printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n", + ioc->name); + return -failcnt; + } +#if 0 + else if (u16cnt != (2 * mptReply->MsgLength)) { + return -101; + } + else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { + return -102; + } +#endif + + dhsprintk((MYIOC_s_INFO_FMT "Got Handshake reply:\n", ioc->name)); + DBG_DUMP_REPLY_FRAME(mptReply) + + dhsprintk((MYIOC_s_INFO_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n", + ioc->name, t, u16cnt/2)); + return u16cnt/2; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * GetLanConfigPages - Fetch LANConfig pages. + * @ioc: Pointer to MPT_ADAPTER structure + * + * Return: 0 for success + * -ENOMEM if no memory available + * -EPERM if not allowed due to ISR context + * -EAGAIN if no msg frames currently available + * -EFAULT for non-successful reply or no reply (timeout) + */ +static int +GetLanConfigPages(MPT_ADAPTER *ioc) +{ + ConfigPageHeader_t hdr; + CONFIGPARMS cfg; + LANPage0_t *ppage0_alloc; + dma_addr_t page0_dma; + LANPage1_t *ppage1_alloc; + dma_addr_t page1_dma; + int rc = 0; + int data_sz; + int copy_sz; + + /* Get LAN Page 0 header */ + hdr.PageVersion = 0; + hdr.PageLength = 0; + hdr.PageNumber = 0; + hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; + cfg.hdr = &hdr; + cfg.physAddr = -1; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.pageAddr = 0; + cfg.timeout = 0; + + if ((rc = mpt_config(ioc, &cfg)) != 0) + return rc; + + if (hdr.PageLength > 0) { + data_sz = hdr.PageLength * 4; + ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma); + rc = -ENOMEM; + if (ppage0_alloc) { + memset((u8 *)ppage0_alloc, 0, data_sz); + cfg.physAddr = page0_dma; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + + if ((rc = mpt_config(ioc, &cfg)) == 0) { + /* save the data */ + copy_sz = min_t(int, sizeof(LANPage0_t), data_sz); + memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz); + + } + + pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma); + + /* FIXME! + * Normalize endianness of structure data, + * by byte-swapping all > 1 byte fields! + */ + + } + + if (rc) + return rc; + } + + /* Get LAN Page 1 header */ + hdr.PageVersion = 0; + hdr.PageLength = 0; + hdr.PageNumber = 1; + hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; + cfg.hdr = &hdr; + cfg.physAddr = -1; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.pageAddr = 0; + + if ((rc = mpt_config(ioc, &cfg)) != 0) + return rc; + + if (hdr.PageLength == 0) + return 0; + + data_sz = hdr.PageLength * 4; + rc = -ENOMEM; + ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma); + if (ppage1_alloc) { + memset((u8 *)ppage1_alloc, 0, data_sz); + cfg.physAddr = page1_dma; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + + if ((rc = mpt_config(ioc, &cfg)) == 0) { + /* save the data */ + copy_sz = min_t(int, sizeof(LANPage1_t), data_sz); + memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz); + } + + pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma); + + /* FIXME! + * Normalize endianness of structure data, + * by byte-swapping all > 1 byte fields! + */ + + } + + return rc; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * GetFcPortPage0 - Fetch FCPort config Page0. + * @ioc: Pointer to MPT_ADAPTER structure + * @portnum: IOC Port number + * + * Return: 0 for success + * -ENOMEM if no memory available + * -EPERM if not allowed due to ISR context + * -EAGAIN if no msg frames currently available + * -EFAULT for non-successful reply or no reply (timeout) + */ +static int +GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) +{ + ConfigPageHeader_t hdr; + CONFIGPARMS cfg; + FCPortPage0_t *ppage0_alloc; + FCPortPage0_t *pp0dest; + dma_addr_t page0_dma; + int data_sz; + int copy_sz; + int rc; + + /* Get FCPort Page 0 header */ + hdr.PageVersion = 0; + hdr.PageLength = 0; + hdr.PageNumber = 0; + hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT; + cfg.hdr = &hdr; + cfg.physAddr = -1; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.pageAddr = portnum; + cfg.timeout = 0; + + if ((rc = mpt_config(ioc, &cfg)) != 0) + return rc; + + if (hdr.PageLength == 0) + return 0; + + data_sz = hdr.PageLength * 4; + rc = -ENOMEM; + ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma); + if (ppage0_alloc) { + memset((u8 *)ppage0_alloc, 0, data_sz); + cfg.physAddr = page0_dma; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + + if ((rc = mpt_config(ioc, &cfg)) == 0) { + /* save the data */ + pp0dest = &ioc->fc_port_page0[portnum]; + copy_sz = min_t(int, sizeof(FCPortPage0_t), data_sz); + memcpy(pp0dest, ppage0_alloc, copy_sz); + + /* + * Normalize endianness of structure data, + * by byte-swapping all > 1 byte fields! + */ + pp0dest->Flags = le32_to_cpu(pp0dest->Flags); + pp0dest->PortIdentifier = le32_to_cpu(pp0dest->PortIdentifier); + pp0dest->WWNN.Low = le32_to_cpu(pp0dest->WWNN.Low); + pp0dest->WWNN.High = le32_to_cpu(pp0dest->WWNN.High); + pp0dest->WWPN.Low = le32_to_cpu(pp0dest->WWPN.Low); + pp0dest->WWPN.High = le32_to_cpu(pp0dest->WWPN.High); + pp0dest->SupportedServiceClass = le32_to_cpu(pp0dest->SupportedServiceClass); + pp0dest->SupportedSpeeds = le32_to_cpu(pp0dest->SupportedSpeeds); + pp0dest->CurrentSpeed = le32_to_cpu(pp0dest->CurrentSpeed); + pp0dest->MaxFrameSize = le32_to_cpu(pp0dest->MaxFrameSize); + pp0dest->FabricWWNN.Low = le32_to_cpu(pp0dest->FabricWWNN.Low); + pp0dest->FabricWWNN.High = le32_to_cpu(pp0dest->FabricWWNN.High); + pp0dest->FabricWWPN.Low = le32_to_cpu(pp0dest->FabricWWPN.Low); + pp0dest->FabricWWPN.High = le32_to_cpu(pp0dest->FabricWWPN.High); + pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount); + pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators); + + } + + pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma); + } + + return rc; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * GetIoUnitPage2 - Retrieve BIOS version and boot order information. + * @ioc: Pointer to MPT_ADAPTER structure + * + * Returns: 0 for success + * -ENOMEM if no memory available + * -EPERM if not allowed due to ISR context + * -EAGAIN if no msg frames currently available + * -EFAULT for non-successful reply or no reply (timeout) + */ +static int +GetIoUnitPage2(MPT_ADAPTER *ioc) +{ + ConfigPageHeader_t hdr; + CONFIGPARMS cfg; + IOUnitPage2_t *ppage_alloc; + dma_addr_t page_dma; + int data_sz; + int rc; + + /* Get the page header */ + hdr.PageVersion = 0; + hdr.PageLength = 0; + hdr.PageNumber = 2; + hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT; + cfg.hdr = &hdr; + cfg.physAddr = -1; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.pageAddr = 0; + cfg.timeout = 0; + + if ((rc = mpt_config(ioc, &cfg)) != 0) + return rc; + + if (hdr.PageLength == 0) + return 0; + + /* Read the config page */ + data_sz = hdr.PageLength * 4; + rc = -ENOMEM; + ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma); + if (ppage_alloc) { + memset((u8 *)ppage_alloc, 0, data_sz); + cfg.physAddr = page_dma; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + + /* If Good, save data */ + if ((rc = mpt_config(ioc, &cfg)) == 0) + ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion); + + pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma); + } + + return rc; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2 + * @ioc: Pointer to a Adapter Strucutre + * @portnum: IOC port number + * + * Return: -EFAULT if read of config page header fails + * or if no nvram + * If read of SCSI Port Page 0 fails, + * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) + * Adapter settings: async, narrow + * Return 1 + * If read of SCSI Port Page 2 fails, + * Adapter settings valid + * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) + * Return 1 + * Else + * Both valid + * Return 0 + * CHECK - what type of locking mechanisms should be used???? + */ +static int +mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum) +{ + u8 *pbuf; + dma_addr_t buf_dma; + CONFIGPARMS cfg; + ConfigPageHeader_t header; + int ii; + int data, rc = 0; + + /* Allocate memory + */ + if (!ioc->spi_data.nvram) { + int sz; + u8 *mem; + sz = MPT_MAX_SCSI_DEVICES * sizeof(int); + mem = kmalloc(sz, GFP_ATOMIC); + if (mem == NULL) + return -EFAULT; + + ioc->spi_data.nvram = (int *) mem; + + dprintk((MYIOC_s_INFO_FMT "SCSI device NVRAM settings @ %p, sz=%d\n", + ioc->name, ioc->spi_data.nvram, sz)); + } + + /* Invalidate NVRAM information + */ + for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { + ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID; + } + + /* Read SPP0 header, allocate memory, then read page. + */ + header.PageVersion = 0; + header.PageLength = 0; + header.PageNumber = 0; + header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; + cfg.hdr = &header; + cfg.physAddr = -1; + cfg.pageAddr = portnum; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.timeout = 0; /* use default */ + if (mpt_config(ioc, &cfg) != 0) + return -EFAULT; + + if (header.PageLength > 0) { + pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma); + if (pbuf) { + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + cfg.physAddr = buf_dma; + if (mpt_config(ioc, &cfg) != 0) { + ioc->spi_data.maxBusWidth = MPT_NARROW; + ioc->spi_data.maxSyncOffset = 0; + ioc->spi_data.minSyncFactor = MPT_ASYNC; + ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN; + rc = 1; + } else { + /* Save the Port Page 0 data + */ + SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf; + pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities); + pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface); + + if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) { + ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS; + dinitprintk((KERN_INFO MYNAM " :%s noQas due to Capabilities=%x\n", + ioc->name, pPP0->Capabilities)); + } + ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0; + data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK; + if (data) { + ioc->spi_data.maxSyncOffset = (u8) (data >> 16); + data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK; + ioc->spi_data.minSyncFactor = (u8) (data >> 8); + } else { + ioc->spi_data.maxSyncOffset = 0; + ioc->spi_data.minSyncFactor = MPT_ASYNC; + } + + ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK; + + /* Update the minSyncFactor based on bus type. + */ + if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) || + (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) { + + if (ioc->spi_data.minSyncFactor < MPT_ULTRA) + ioc->spi_data.minSyncFactor = MPT_ULTRA; + } + } + if (pbuf) { + pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma); + } + } + } + + /* SCSI Port Page 2 - Read the header then the page. + */ + header.PageVersion = 0; + header.PageLength = 0; + header.PageNumber = 2; + header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; + cfg.hdr = &header; + cfg.physAddr = -1; + cfg.pageAddr = portnum; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + if (mpt_config(ioc, &cfg) != 0) + return -EFAULT; + + if (header.PageLength > 0) { + /* Allocate memory and read SCSI Port Page 2 + */ + pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma); + if (pbuf) { + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM; + cfg.physAddr = buf_dma; + if (mpt_config(ioc, &cfg) != 0) { + /* Nvram data is left with INVALID mark + */ + rc = 1; + } else { + SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf; + MpiDeviceInfo_t *pdevice = NULL; + + /* Save the Port Page 2 data + * (reformat into a 32bit quantity) + */ + data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK; + ioc->spi_data.PortFlags = data; + for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { + pdevice = &pPP2->DeviceSettings[ii]; + data = (le16_to_cpu(pdevice->DeviceFlags) << 16) | + (pdevice->SyncFactor << 8) | pdevice->Timeout; + ioc->spi_data.nvram[ii] = data; + } + } + + pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma); + } + } + + /* Update Adapter limits with those from NVRAM + * Comment: Don't need to do this. Target performance + * parameters will never exceed the adapters limits. + */ + + return rc; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* mpt_readScsiDevicePageHeaders - save version and length of SDP1 + * @ioc: Pointer to a Adapter Strucutre + * @portnum: IOC port number + * + * Return: -EFAULT if read of config page header fails + * or 0 if success. + */ +static int +mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum) +{ + CONFIGPARMS cfg; + ConfigPageHeader_t header; + + /* Read the SCSI Device Page 1 header + */ + header.PageVersion = 0; + header.PageLength = 0; + header.PageNumber = 1; + header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; + cfg.hdr = &header; + cfg.physAddr = -1; + cfg.pageAddr = portnum; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.timeout = 0; + if (mpt_config(ioc, &cfg) != 0) + return -EFAULT; + + ioc->spi_data.sdp1version = cfg.hdr->PageVersion; + ioc->spi_data.sdp1length = cfg.hdr->PageLength; + + header.PageVersion = 0; + header.PageLength = 0; + header.PageNumber = 0; + header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; + if (mpt_config(ioc, &cfg) != 0) + return -EFAULT; + + ioc->spi_data.sdp0version = cfg.hdr->PageVersion; + ioc->spi_data.sdp0length = cfg.hdr->PageLength; + + dcprintk((MYIOC_s_INFO_FMT "Headers: 0: version %d length %d\n", + ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length)); + + dcprintk((MYIOC_s_INFO_FMT "Headers: 1: version %d length %d\n", + ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length)); + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes + * @ioc: Pointer to a Adapter Strucutre + * @portnum: IOC port number + * + * Return: + * 0 on success + * -EFAULT if read of config page header fails or data pointer not NULL + * -ENOMEM if pci_alloc failed + */ +int +mpt_findImVolumes(MPT_ADAPTER *ioc) +{ + IOCPage2_t *pIoc2; + u8 *mem; + ConfigPageIoc2RaidVol_t *pIocRv; + dma_addr_t ioc2_dma; + CONFIGPARMS cfg; + ConfigPageHeader_t header; + int jj; + int rc = 0; + int iocpage2sz; + u8 nVols, nPhys; + u8 vid, vbus, vioc; + + /* Read IOCP2 header then the page. + */ + header.PageVersion = 0; + header.PageLength = 0; + header.PageNumber = 2; + header.PageType = MPI_CONFIG_PAGETYPE_IOC; + cfg.hdr = &header; + cfg.physAddr = -1; + cfg.pageAddr = 0; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.timeout = 0; + if (mpt_config(ioc, &cfg) != 0) + return -EFAULT; + + if (header.PageLength == 0) + return -EFAULT; + + iocpage2sz = header.PageLength * 4; + pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma); + if (!pIoc2) + return -ENOMEM; + + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + cfg.physAddr = ioc2_dma; + if (mpt_config(ioc, &cfg) != 0) + goto done_and_free; + + if ( (mem = (u8 *)ioc->spi_data.pIocPg2) == NULL ) { + mem = kmalloc(iocpage2sz, GFP_ATOMIC); + if (mem) { + ioc->spi_data.pIocPg2 = (IOCPage2_t *) mem; + } else { + goto done_and_free; + } + } + memcpy(mem, (u8 *)pIoc2, iocpage2sz); + + /* Identify RAID Volume Id's */ + nVols = pIoc2->NumActiveVolumes; + if ( nVols == 0) { + /* No RAID Volume. + */ + goto done_and_free; + } else { + /* At least 1 RAID Volume + */ + pIocRv = pIoc2->RaidVolume; + ioc->spi_data.isRaid = 0; + for (jj = 0; jj < nVols; jj++, pIocRv++) { + vid = pIocRv->VolumeID; + vbus = pIocRv->VolumeBus; + vioc = pIocRv->VolumeIOC; + + /* find the match + */ + if (vbus == 0) { + ioc->spi_data.isRaid |= (1 << vid); + } else { + /* Error! Always bus 0 + */ + } + } + } + + /* Identify Hidden Physical Disk Id's */ + nPhys = pIoc2->NumActivePhysDisks; + if (nPhys == 0) { + /* No physical disks. + */ + } else { + mpt_read_ioc_pg_3(ioc); + } + +done_and_free: + pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma); + + return rc; +} + +int +mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) +{ + IOCPage3_t *pIoc3; + u8 *mem; + CONFIGPARMS cfg; + ConfigPageHeader_t header; + dma_addr_t ioc3_dma; + int iocpage3sz = 0; + + /* Free the old page + */ + if (ioc->spi_data.pIocPg3) { + kfree(ioc->spi_data.pIocPg3); + ioc->spi_data.pIocPg3 = NULL; + } + + /* There is at least one physical disk. + * Read and save IOC Page 3 + */ + header.PageVersion = 0; + header.PageLength = 0; + header.PageNumber = 3; + header.PageType = MPI_CONFIG_PAGETYPE_IOC; + cfg.hdr = &header; + cfg.physAddr = -1; + cfg.pageAddr = 0; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.timeout = 0; + if (mpt_config(ioc, &cfg) != 0) + return 0; + + if (header.PageLength == 0) + return 0; + + /* Read Header good, alloc memory + */ + iocpage3sz = header.PageLength * 4; + pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma); + if (!pIoc3) + return 0; + + /* Read the Page and save the data + * into malloc'd memory. + */ + cfg.physAddr = ioc3_dma; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + if (mpt_config(ioc, &cfg) == 0) { + mem = kmalloc(iocpage3sz, GFP_ATOMIC); + if (mem) { + memcpy(mem, (u8 *)pIoc3, iocpage3sz); + ioc->spi_data.pIocPg3 = (IOCPage3_t *) mem; + } + } + + pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma); + + return 0; +} + +static void +mpt_read_ioc_pg_4(MPT_ADAPTER *ioc) +{ + IOCPage4_t *pIoc4; + CONFIGPARMS cfg; + ConfigPageHeader_t header; + dma_addr_t ioc4_dma; + int iocpage4sz; + + /* Read and save IOC Page 4 + */ + header.PageVersion = 0; + header.PageLength = 0; + header.PageNumber = 4; + header.PageType = MPI_CONFIG_PAGETYPE_IOC; + cfg.hdr = &header; + cfg.physAddr = -1; + cfg.pageAddr = 0; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.timeout = 0; + if (mpt_config(ioc, &cfg) != 0) + return; + + if (header.PageLength == 0) + return; + + if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) { + iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */ + pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma); + if (!pIoc4) + return; + } else { + ioc4_dma = ioc->spi_data.IocPg4_dma; + iocpage4sz = ioc->spi_data.IocPg4Sz; + } + + /* Read the Page into dma memory. + */ + cfg.physAddr = ioc4_dma; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + if (mpt_config(ioc, &cfg) == 0) { + ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4; + ioc->spi_data.IocPg4_dma = ioc4_dma; + ioc->spi_data.IocPg4Sz = iocpage4sz; + } else { + pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma); + ioc->spi_data.pIocPg4 = NULL; + } +} + +static void +mpt_read_ioc_pg_1(MPT_ADAPTER *ioc) +{ + IOCPage1_t *pIoc1; + CONFIGPARMS cfg; + ConfigPageHeader_t header; + dma_addr_t ioc1_dma; + int iocpage1sz = 0; + u32 tmp; + + /* Check the Coalescing Timeout in IOC Page 1 + */ + header.PageVersion = 0; + header.PageLength = 0; + header.PageNumber = 1; + header.PageType = MPI_CONFIG_PAGETYPE_IOC; + cfg.hdr = &header; + cfg.physAddr = -1; + cfg.pageAddr = 0; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.timeout = 0; + if (mpt_config(ioc, &cfg) != 0) + return; + + if (header.PageLength == 0) + return; + + /* Read Header good, alloc memory + */ + iocpage1sz = header.PageLength * 4; + pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma); + if (!pIoc1) + return; + + /* Read the Page and check coalescing timeout + */ + cfg.physAddr = ioc1_dma; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + if (mpt_config(ioc, &cfg) == 0) { + + tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING; + if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) { + tmp = le32_to_cpu(pIoc1->CoalescingTimeout); + + dprintk((MYIOC_s_INFO_FMT "Coalescing Enabled Timeout = %d\n", + ioc->name, tmp)); + + if (tmp > MPT_COALESCING_TIMEOUT) { + pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT); + + /* Write NVRAM and current + */ + cfg.dir = 1; + cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; + if (mpt_config(ioc, &cfg) == 0) { + dprintk((MYIOC_s_INFO_FMT "Reset Current Coalescing Timeout to = %d\n", + ioc->name, MPT_COALESCING_TIMEOUT)); + + cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM; + if (mpt_config(ioc, &cfg) == 0) { + dprintk((MYIOC_s_INFO_FMT "Reset NVRAM Coalescing Timeout to = %d\n", + ioc->name, MPT_COALESCING_TIMEOUT)); + } else { + dprintk((MYIOC_s_INFO_FMT "Reset NVRAM Coalescing Timeout Failed\n", + ioc->name)); + } + + } else { + dprintk((MYIOC_s_WARN_FMT "Reset of Current Coalescing Timeout Failed!\n", + ioc->name)); + } + } + + } else { + dprintk((MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name)); + } + } + + pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma); + + return; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * SendEventNotification - Send EventNotification (on or off) request + * to MPT adapter. + * @ioc: Pointer to MPT_ADAPTER structure + * @EvSwitch: Event switch flags + */ +static int +SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch) +{ + EventNotification_t *evnp; + + evnp = (EventNotification_t *) mpt_get_msg_frame(mpt_base_index, ioc); + if (evnp == NULL) { + dprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n", + ioc->name)); + return 0; + } + memset(evnp, 0, sizeof(*evnp)); + + dprintk((MYIOC_s_INFO_FMT "Sending EventNotification(%d)\n", ioc->name, EvSwitch)); + + evnp->Function = MPI_FUNCTION_EVENT_NOTIFICATION; + evnp->ChainOffset = 0; + evnp->MsgFlags = 0; + evnp->Switch = EvSwitch; + + mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)evnp); + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * SendEventAck - Send EventAck request to MPT adapter. + * @ioc: Pointer to MPT_ADAPTER structure + * @evnp: Pointer to original EventNotification request + */ +static int +SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp) +{ + EventAck_t *pAck; + + if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { + printk(MYIOC_s_WARN_FMT "Unable to allocate event ACK request frame!\n", + ioc->name); + return -1; + } + memset(pAck, 0, sizeof(*pAck)); + + dprintk((MYIOC_s_INFO_FMT "Sending EventAck\n", ioc->name)); + + pAck->Function = MPI_FUNCTION_EVENT_ACK; + pAck->ChainOffset = 0; + pAck->MsgFlags = 0; + pAck->Event = evnp->Event; + pAck->EventContext = evnp->EventContext; + + mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck); + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_config - Generic function to issue config message + * @ioc - Pointer to an adapter structure + * @cfg - Pointer to a configuration structure. Struct contains + * action, page address, direction, physical address + * and pointer to a configuration page header + * Page header is updated. + * + * Returns 0 for success + * -EPERM if not allowed due to ISR context + * -EAGAIN if no msg frames currently available + * -EFAULT for non-successful reply or no reply (timeout) + */ +int +mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg) +{ + Config_t *pReq; + MPT_FRAME_HDR *mf; + unsigned long flags; + int ii, rc; + u32 flagsLength; + int in_isr; + + /* (Bugzilla:fibrebugs, #513) + * Bug fix (part 1)! 20010905 -sralston + * Prevent calling wait_event() (below), if caller happens + * to be in ISR context, because that is fatal! + */ + in_isr = in_interrupt(); + if (in_isr) { + dcprintk((MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n", + ioc->name)); + return -EPERM; + } + + /* Get and Populate a free Frame + */ + if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { + dcprintk((MYIOC_s_WARN_FMT "mpt_config: no msg frames!\n", + ioc->name)); + return -EAGAIN; + } + pReq = (Config_t *)mf; + pReq->Action = pCfg->action; + pReq->Reserved = 0; + pReq->ChainOffset = 0; + pReq->Function = MPI_FUNCTION_CONFIG; + pReq->ExtPageLength = 0; + pReq->ExtPageType = 0; + pReq->MsgFlags = 0; + for (ii=0; ii < 8; ii++) + pReq->Reserved2[ii] = 0; + + pReq->Header.PageVersion = pCfg->hdr->PageVersion; + pReq->Header.PageLength = pCfg->hdr->PageLength; + pReq->Header.PageNumber = pCfg->hdr->PageNumber; + pReq->Header.PageType = (pCfg->hdr->PageType & MPI_CONFIG_PAGETYPE_MASK); + pReq->PageAddress = cpu_to_le32(pCfg->pageAddr); + + /* Add a SGE to the config request. + */ + if (pCfg->dir) + flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE; + else + flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ; + + flagsLength |= pCfg->hdr->PageLength * 4; + + mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr); + + dcprintk((MYIOC_s_INFO_FMT "Sending Config request type %d, page %d and action %d\n", + ioc->name, pReq->Header.PageType, pReq->Header.PageNumber, pReq->Action)); + + /* Append pCfg pointer to end of mf + */ + *((void **) (((u8 *) mf) + (ioc->req_sz - sizeof(void *)))) = (void *) pCfg; + + /* Initalize the timer + */ + init_timer(&pCfg->timer); + pCfg->timer.data = (unsigned long) ioc; + pCfg->timer.function = mpt_timer_expired; + pCfg->wait_done = 0; + + /* Set the timer; ensure 10 second minimum */ + if (pCfg->timeout < 10) + pCfg->timer.expires = jiffies + HZ*10; + else + pCfg->timer.expires = jiffies + HZ*pCfg->timeout; + + /* Add to end of Q, set timer and then issue this command */ + spin_lock_irqsave(&ioc->FreeQlock, flags); + list_add_tail(&pCfg->linkage, &ioc->configQ); + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + + add_timer(&pCfg->timer); + mpt_put_msg_frame(mpt_base_index, ioc, mf); + wait_event(mpt_waitq, pCfg->wait_done); + + /* mf has been freed - do not access */ + + rc = pCfg->status; + + return rc; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_toolbox - Generic function to issue toolbox message + * @ioc - Pointer to an adapter structure + * @cfg - Pointer to a toolbox structure. Struct contains + * action, page address, direction, physical address + * and pointer to a configuration page header + * Page header is updated. + * + * Returns 0 for success + * -EPERM if not allowed due to ISR context + * -EAGAIN if no msg frames currently available + * -EFAULT for non-successful reply or no reply (timeout) + */ +int +mpt_toolbox(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg) +{ + ToolboxIstwiReadWriteRequest_t *pReq; + MPT_FRAME_HDR *mf; + struct pci_dev *pdev; + unsigned long flags; + int rc; + u32 flagsLength; + int in_isr; + + /* (Bugzilla:fibrebugs, #513) + * Bug fix (part 1)! 20010905 -sralston + * Prevent calling wait_event() (below), if caller happens + * to be in ISR context, because that is fatal! + */ + in_isr = in_interrupt(); + if (in_isr) { + dcprintk((MYIOC_s_WARN_FMT "toobox request not allowed in ISR context!\n", + ioc->name)); + return -EPERM; + } + + /* Get and Populate a free Frame + */ + if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { + dcprintk((MYIOC_s_WARN_FMT "mpt_toolbox: no msg frames!\n", + ioc->name)); + return -EAGAIN; + } + pReq = (ToolboxIstwiReadWriteRequest_t *)mf; + pReq->Tool = pCfg->action; + pReq->Reserved = 0; + pReq->ChainOffset = 0; + pReq->Function = MPI_FUNCTION_TOOLBOX; + pReq->Reserved1 = 0; + pReq->Reserved2 = 0; + pReq->MsgFlags = 0; + pReq->Flags = pCfg->dir; + pReq->BusNum = 0; + pReq->Reserved3 = 0; + pReq->NumAddressBytes = 0x01; + pReq->Reserved4 = 0; + pReq->DataLength = 0x04; + pdev = (struct pci_dev *) ioc->pcidev; + if (pdev->devfn & 1) + pReq->DeviceAddr = 0xB2; + else + pReq->DeviceAddr = 0xB0; + pReq->Addr1 = 0; + pReq->Addr2 = 0; + pReq->Addr3 = 0; + pReq->Reserved5 = 0; + + /* Add a SGE to the config request. + */ + + flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | 4; + + mpt_add_sge((char *)&pReq->SGL, flagsLength, pCfg->physAddr); + + dcprintk((MYIOC_s_INFO_FMT "Sending Toolbox request, Tool=%x\n", + ioc->name, pReq->Tool)); + + /* Append pCfg pointer to end of mf + */ + *((void **) (((u8 *) mf) + (ioc->req_sz - sizeof(void *)))) = (void *) pCfg; + + /* Initalize the timer + */ + init_timer(&pCfg->timer); + pCfg->timer.data = (unsigned long) ioc; + pCfg->timer.function = mpt_timer_expired; + pCfg->wait_done = 0; + + /* Set the timer; ensure 10 second minimum */ + if (pCfg->timeout < 10) + pCfg->timer.expires = jiffies + HZ*10; + else + pCfg->timer.expires = jiffies + HZ*pCfg->timeout; + + /* Add to end of Q, set timer and then issue this command */ + spin_lock_irqsave(&ioc->FreeQlock, flags); + list_add_tail(&pCfg->linkage, &ioc->configQ); + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + + add_timer(&pCfg->timer); + mpt_put_msg_frame(mpt_base_index, ioc, mf); + wait_event(mpt_waitq, pCfg->wait_done); + + /* mf has been freed - do not access */ + + rc = pCfg->status; + + return rc; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_timer_expired - Call back for timer process. + * Used only internal config functionality. + * @data: Pointer to MPT_SCSI_HOST recast as an unsigned long + */ +static void +mpt_timer_expired(unsigned long data) +{ + MPT_ADAPTER *ioc = (MPT_ADAPTER *) data; + + dcprintk((MYIOC_s_WARN_FMT "mpt_timer_expired! \n", ioc->name)); + + /* Perform a FW reload */ + if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0) + printk(MYIOC_s_WARN_FMT "Firmware Reload FAILED!\n", ioc->name); + + /* No more processing. + * Hard reset clean-up will wake up + * process and free all resources. + */ + dcprintk((MYIOC_s_WARN_FMT "mpt_timer_expired complete!\n", ioc->name)); + + return; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_ioc_reset - Base cleanup for hard reset + * @ioc: Pointer to the adapter structure + * @reset_phase: Indicates pre- or post-reset functionality + * + * Remark: Free's resources with internally generated commands. + */ +static int +mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) +{ + CONFIGPARMS *pCfg; + unsigned long flags; + + dprintk((KERN_WARNING MYNAM + ": IOC %s_reset routed to MPT base driver!\n", + reset_phase==MPT_IOC_SETUP_RESET ? "setup" : ( + reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post"))); + + if (reset_phase == MPT_IOC_SETUP_RESET) { + ; + } else if (reset_phase == MPT_IOC_PRE_RESET) { + /* If the internal config Q is not empty - + * delete timer. MF resources will be freed when + * the FIFO's are primed. + */ + spin_lock_irqsave(&ioc->FreeQlock, flags); + list_for_each_entry(pCfg, &ioc->configQ, linkage) + del_timer(&pCfg->timer); + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + + } else { + CONFIGPARMS *pNext; + + /* Search the configQ for internal commands. + * Flush the Q, and wake up all suspended threads. + */ + spin_lock_irqsave(&ioc->FreeQlock, flags); + list_for_each_entry_safe(pCfg, pNext, &ioc->configQ, linkage) { + list_del(&pCfg->linkage); + + pCfg->status = MPT_CONFIG_ERROR; + pCfg->wait_done = 1; + wake_up(&mpt_waitq); + } + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + } + + return 1; /* currently means nothing really */ +} + + +#ifdef CONFIG_PROC_FS /* { */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff... + */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries. + * + * Returns 0 for success, non-zero for failure. + */ +static int +procmpt_create(void) +{ + struct proc_dir_entry *ent; + + mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL); + if (mpt_proc_root_dir == NULL) + return -ENOTDIR; + + ent = create_proc_entry("summary", S_IFREG|S_IRUGO, mpt_proc_root_dir); + if (ent) + ent->read_proc = procmpt_summary_read; + + ent = create_proc_entry("version", S_IFREG|S_IRUGO, mpt_proc_root_dir); + if (ent) + ent->read_proc = procmpt_version_read; + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries. + * + * Returns 0 for success, non-zero for failure. + */ +static void +procmpt_destroy(void) +{ + remove_proc_entry("version", mpt_proc_root_dir); + remove_proc_entry("summary", mpt_proc_root_dir); + remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * procmpt_summary_read - Handle read request from /proc/mpt/summary + * or from /proc/mpt/iocN/summary. + * @buf: Pointer to area to write information + * @start: Pointer to start pointer + * @offset: Offset to start writing + * @request: + * @eof: Pointer to EOF integer + * @data: Pointer + * + * Returns number of characters written to process performing the read. + */ +static int +procmpt_summary_read(char *buf, char **start, off_t offset, int request, int *eof, void *data) +{ + MPT_ADAPTER *ioc; + char *out = buf; + int len; + + if (data) { + int more = 0; + + ioc = data; + mpt_print_ioc_summary(ioc, out, &more, 0, 1); + + out += more; + } else { + list_for_each_entry(ioc, &ioc_list, list) { + int more = 0; + + mpt_print_ioc_summary(ioc, out, &more, 0, 1); + + out += more; + if ((out-buf) >= request) + break; + } + } + + len = out - buf; + + MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * procmpt_version_read - Handle read request from /proc/mpt/version. + * @buf: Pointer to area to write information + * @start: Pointer to start pointer + * @offset: Offset to start writing + * @request: + * @eof: Pointer to EOF integer + * @data: Pointer + * + * Returns number of characters written to process performing the read. + */ +static int +procmpt_version_read(char *buf, char **start, off_t offset, int request, int *eof, void *data) +{ + int ii; + int scsi, lan, ctl, targ, dmp; + char *drvname; + int len; + + len = sprintf(buf, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON); + len += sprintf(buf+len, " Fusion MPT base driver\n"); + + scsi = lan = ctl = targ = dmp = 0; + for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) { + drvname = NULL; + if (MptCallbacks[ii]) { + switch (MptDriverClass[ii]) { + case MPTSCSIH_DRIVER: + if (!scsi++) drvname = "SCSI host"; + break; + case MPTLAN_DRIVER: + if (!lan++) drvname = "LAN"; + break; + case MPTSTM_DRIVER: + if (!targ++) drvname = "SCSI target"; + break; + case MPTCTL_DRIVER: + if (!ctl++) drvname = "ioctl"; + break; + } + + if (drvname) + len += sprintf(buf+len, " Fusion MPT %s driver\n", drvname); + } + } + + MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * procmpt_iocinfo_read - Handle read request from /proc/mpt/iocN/info. + * @buf: Pointer to area to write information + * @start: Pointer to start pointer + * @offset: Offset to start writing + * @request: + * @eof: Pointer to EOF integer + * @data: Pointer + * + * Returns number of characters written to process performing the read. + */ +static int +procmpt_iocinfo_read(char *buf, char **start, off_t offset, int request, int *eof, void *data) +{ + MPT_ADAPTER *ioc = data; + int len; + char expVer[32]; + int sz; + int p; + + mpt_get_fw_exp_ver(expVer, ioc); + + len = sprintf(buf, "%s:", ioc->name); + if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) + len += sprintf(buf+len, " (f/w download boot flag set)"); +// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL) +// len += sprintf(buf+len, " CONFIG_CHECKSUM_FAIL!"); + + len += sprintf(buf+len, "\n ProductID = 0x%04x (%s)\n", + ioc->facts.ProductID, + ioc->prod_name); + len += sprintf(buf+len, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer); + if (ioc->facts.FWImageSize) + len += sprintf(buf+len, " (fw_size=%d)", ioc->facts.FWImageSize); + len += sprintf(buf+len, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion); + len += sprintf(buf+len, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit); + len += sprintf(buf+len, " EventState = 0x%02x\n", ioc->facts.EventState); + + len += sprintf(buf+len, " CurrentHostMfaHighAddr = 0x%08x\n", + ioc->facts.CurrentHostMfaHighAddr); + len += sprintf(buf+len, " CurrentSenseBufferHighAddr = 0x%08x\n", + ioc->facts.CurrentSenseBufferHighAddr); + + len += sprintf(buf+len, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth); + len += sprintf(buf+len, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize); + + len += sprintf(buf+len, " RequestFrames @ 0x%p (Dma @ 0x%p)\n", + (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma); + /* + * Rounding UP to nearest 4-kB boundary here... + */ + sz = (ioc->req_sz * ioc->req_depth) + 128; + sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000; + len += sprintf(buf+len, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n", + ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz); + len += sprintf(buf+len, " {MaxReqSz=%d} {MaxReqDepth=%d}\n", + 4*ioc->facts.RequestFrameSize, + ioc->facts.GlobalCredits); + + len += sprintf(buf+len, " Frames @ 0x%p (Dma @ 0x%p)\n", + (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma); + sz = (ioc->reply_sz * ioc->reply_depth) + 128; + len += sprintf(buf+len, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n", + ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz); + len += sprintf(buf+len, " {MaxRepSz=%d} {MaxRepDepth=%d}\n", + ioc->facts.CurReplyFrameSize, + ioc->facts.ReplyQueueDepth); + + len += sprintf(buf+len, " MaxDevices = %d\n", + (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices); + len += sprintf(buf+len, " MaxBuses = %d\n", ioc->facts.MaxBuses); + + /* per-port info */ + for (p=0; p < ioc->facts.NumberOfPorts; p++) { + len += sprintf(buf+len, " PortNumber = %d (of %d)\n", + p+1, + ioc->facts.NumberOfPorts); + if (ioc->bus_type == FC) { + if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { + u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; + len += sprintf(buf+len, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n", + a[5], a[4], a[3], a[2], a[1], a[0]); + } + len += sprintf(buf+len, " WWN = %08X%08X:%08X%08X\n", + ioc->fc_port_page0[p].WWNN.High, + ioc->fc_port_page0[p].WWNN.Low, + ioc->fc_port_page0[p].WWPN.High, + ioc->fc_port_page0[p].WWPN.Low); + } + } + + MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len); +} + +#endif /* CONFIG_PROC_FS } */ + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static void +mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc) +{ + buf[0] ='\0'; + if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) { + sprintf(buf, " (Exp %02d%02d)", + (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */ + (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */ + + /* insider hack! */ + if ((ioc->facts.FWVersion.Word >> 8) & 0x80) + strcat(buf, " [MDBG]"); + } +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer. + * @ioc: Pointer to MPT_ADAPTER structure + * @buffer: Pointer to buffer where IOC summary info should be written + * @size: Pointer to number of bytes we wrote (set by this routine) + * @len: Offset at which to start writing in buffer + * @showlan: Display LAN stuff? + * + * This routine writes (english readable) ASCII text, which represents + * a summary of IOC information, to a buffer. + */ +void +mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan) +{ + char expVer[32]; + int y; + + mpt_get_fw_exp_ver(expVer, ioc); + + /* + * Shorter summary of attached ioc's... + */ + y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", + ioc->name, + ioc->prod_name, + MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ + ioc->facts.FWVersion.Word, + expVer, + ioc->facts.NumberOfPorts, + ioc->req_depth); + + if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { + u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; + y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X", + a[5], a[4], a[3], a[2], a[1], a[0]); + } + +#ifndef __sparc__ + y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq); +#else + y += sprintf(buffer+len+y, ", IRQ=%s", __irq_itoa(ioc->pci_irq)); +#endif + + if (!ioc->active) + y += sprintf(buffer+len+y, " (disabled)"); + + y += sprintf(buffer+len+y, "\n"); + + *size = y; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Reset Handling + */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_HardResetHandler - Generic reset handler, issue SCSI Task + * Management call based on input arg values. If TaskMgmt fails, + * return associated SCSI request. + * @ioc: Pointer to MPT_ADAPTER structure + * @sleepFlag: Indicates if sleep or schedule must be called. + * + * Remark: _HardResetHandler can be invoked from an interrupt thread (timer) + * or a non-interrupt thread. In the former, must not call schedule(). + * + * Remark: A return of -1 is a FATAL error case, as it means a + * FW reload/initialization failed. + * + * Returns 0 for SUCCESS or -1 if FAILED. + */ +int +mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag) +{ + int rc; + unsigned long flags; + + dtmprintk((MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name)); +#ifdef MFCNT + printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name); + printk("MF count 0x%x !\n", ioc->mfcnt); +#endif + + /* Reset the adapter. Prevent more than 1 call to + * mpt_do_ioc_recovery at any instant in time. + */ + spin_lock_irqsave(&ioc->diagLock, flags); + if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)){ + spin_unlock_irqrestore(&ioc->diagLock, flags); + return 0; + } else { + ioc->diagPending = 1; + } + spin_unlock_irqrestore(&ioc->diagLock, flags); + + /* FIXME: If do_ioc_recovery fails, repeat.... + */ + + /* The SCSI driver needs to adjust timeouts on all current + * commands prior to the diagnostic reset being issued. + * Prevents timeouts occuring during a diagnostic reset...very bad. + * For all other protocol drivers, this is a no-op. + */ + { + int ii; + int r = 0; + + for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) { + if (MptResetHandlers[ii]) { + dtmprintk((MYIOC_s_INFO_FMT "Calling IOC reset_setup handler #%d\n", + ioc->name, ii)); + r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_SETUP_RESET); + if (ioc->alt_ioc) { + dtmprintk((MYIOC_s_INFO_FMT "Calling alt-%s setup reset handler #%d\n", + ioc->name, ioc->alt_ioc->name, ii)); + r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_SETUP_RESET); + } + } + } + } + + if ((rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag)) != 0) { + printk(KERN_WARNING MYNAM ": WARNING - (%d) Cannot recover %s\n", + rc, ioc->name); + } + ioc->reload_fw = 0; + if (ioc->alt_ioc) + ioc->alt_ioc->reload_fw = 0; + + spin_lock_irqsave(&ioc->diagLock, flags); + ioc->diagPending = 0; + if (ioc->alt_ioc) + ioc->alt_ioc->diagPending = 0; + spin_unlock_irqrestore(&ioc->diagLock, flags); + + dtmprintk((MYIOC_s_INFO_FMT "HardResetHandler rc = %d!\n", ioc->name, rc)); + + return rc; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static char * +EventDescriptionStr(u8 event, u32 evData0) +{ + char *ds; + + switch(event) { + case MPI_EVENT_NONE: + ds = "None"; + break; + case MPI_EVENT_LOG_DATA: + ds = "Log Data"; + break; + case MPI_EVENT_STATE_CHANGE: + ds = "State Change"; + break; + case MPI_EVENT_UNIT_ATTENTION: + ds = "Unit Attention"; + break; + case MPI_EVENT_IOC_BUS_RESET: + ds = "IOC Bus Reset"; + break; + case MPI_EVENT_EXT_BUS_RESET: + ds = "External Bus Reset"; + break; + case MPI_EVENT_RESCAN: + ds = "Bus Rescan Event"; + /* Ok, do we need to do anything here? As far as + I can tell, this is when a new device gets added + to the loop. */ + break; + case MPI_EVENT_LINK_STATUS_CHANGE: + if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE) + ds = "Link Status(FAILURE) Change"; + else + ds = "Link Status(ACTIVE) Change"; + break; + case MPI_EVENT_LOOP_STATE_CHANGE: + if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP) + ds = "Loop State(LIP) Change"; + else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE) + ds = "Loop State(LPE) Change"; /* ??? */ + else + ds = "Loop State(LPB) Change"; /* ??? */ + break; + case MPI_EVENT_LOGOUT: + ds = "Logout"; + break; + case MPI_EVENT_EVENT_CHANGE: + if (evData0) + ds = "Events(ON) Change"; + else + ds = "Events(OFF) Change"; + break; + case MPI_EVENT_INTEGRATED_RAID: + ds = "Integrated Raid"; + break; + /* + * MPT base "custom" events may be added here... + */ + default: + ds = "Unknown"; + break; + } + return ds; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * ProcessEventNotification - Route a received EventNotificationReply to + * all currently regeistered event handlers. + * @ioc: Pointer to MPT_ADAPTER structure + * @pEventReply: Pointer to EventNotification reply frame + * @evHandlers: Pointer to integer, number of event handlers + * + * Returns sum of event handlers return values. + */ +static int +ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers) +{ + u16 evDataLen; + u32 evData0 = 0; +// u32 evCtx; + int ii; + int r = 0; + int handlers = 0; + char *evStr; + u8 event; + + /* + * Do platform normalization of values + */ + event = le32_to_cpu(pEventReply->Event) & 0xFF; +// evCtx = le32_to_cpu(pEventReply->EventContext); + evDataLen = le16_to_cpu(pEventReply->EventDataLength); + if (evDataLen) { + evData0 = le32_to_cpu(pEventReply->Data[0]); + } + + evStr = EventDescriptionStr(event, evData0); + devtprintk((MYIOC_s_INFO_FMT "MPT event (%s=%02Xh) detected!\n", + ioc->name, + evStr, + event)); + +#if defined(MPT_DEBUG) || defined(MPT_DEBUG_EVENTS) + printk(KERN_INFO MYNAM ": Event data:\n" KERN_INFO); + for (ii = 0; ii < evDataLen; ii++) + printk(" %08x", le32_to_cpu(pEventReply->Data[ii])); + printk("\n"); +#endif + + /* + * Do general / base driver event processing + */ + switch(event) { + case MPI_EVENT_NONE: /* 00 */ + case MPI_EVENT_LOG_DATA: /* 01 */ + case MPI_EVENT_STATE_CHANGE: /* 02 */ + case MPI_EVENT_UNIT_ATTENTION: /* 03 */ + case MPI_EVENT_IOC_BUS_RESET: /* 04 */ + case MPI_EVENT_EXT_BUS_RESET: /* 05 */ + case MPI_EVENT_RESCAN: /* 06 */ + case MPI_EVENT_LINK_STATUS_CHANGE: /* 07 */ + case MPI_EVENT_LOOP_STATE_CHANGE: /* 08 */ + case MPI_EVENT_LOGOUT: /* 09 */ + case MPI_EVENT_INTEGRATED_RAID: /* 0B */ + case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE: /* 0C */ + default: + break; + case MPI_EVENT_EVENT_CHANGE: /* 0A */ + if (evDataLen) { + u8 evState = evData0 & 0xFF; + + /* CHECKME! What if evState unexpectedly says OFF (0)? */ + + /* Update EventState field in cached IocFacts */ + if (ioc->facts.Function) { + ioc->facts.EventState = evState; + } + } + break; + } + + /* + * Should this event be logged? Events are written sequentially. + * When buffer is full, start again at the top. + */ + if (ioc->events && (ioc->eventTypes & ( 1 << event))) { + int idx; + + idx = ioc->eventContext % ioc->eventLogSize; + + ioc->events[idx].event = event; + ioc->events[idx].eventContext = ioc->eventContext; + + for (ii = 0; ii < 2; ii++) { + if (ii < evDataLen) + ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]); + else + ioc->events[idx].data[ii] = 0; + } + + ioc->eventContext++; + } + + + /* + * Call each currently registered protocol event handler. + */ + for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) { + if (MptEvHandlers[ii]) { + devtprintk((MYIOC_s_INFO_FMT "Routing Event to event handler #%d\n", + ioc->name, ii)); + r += (*(MptEvHandlers[ii]))(ioc, pEventReply); + handlers++; + } + } + /* FIXME? Examine results here? */ + + /* + * If needed, send (a single) EventAck. + */ + if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) { + if ((ii = SendEventAck(ioc, pEventReply)) != 0) { + devtprintk((MYIOC_s_WARN_FMT "SendEventAck returned %d\n", + ioc->name, ii)); + } + } + + *evHandlers = handlers; + return r; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_fc_log_info - Log information returned from Fibre Channel IOC. + * @ioc: Pointer to MPT_ADAPTER structure + * @log_info: U32 LogInfo reply word from the IOC + * + * Refer to lsi/fc_log.h. + */ +static void +mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info) +{ + static char *subcl_str[8] = { + "FCP Initiator", "FCP Target", "LAN", "MPI Message Layer", + "FC Link", "Context Manager", "Invalid Field Offset", "State Change Info" + }; + u8 subcl = (log_info >> 24) & 0x7; + + printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubCl={%s}\n", + ioc->name, log_info, subcl_str[subcl]); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_sp_log_info - Log information returned from SCSI Parallel IOC. + * @ioc: Pointer to MPT_ADAPTER structure + * @mr: Pointer to MPT reply frame + * @log_info: U32 LogInfo word from the IOC + * + * Refer to lsi/sp_log.h. + */ +static void +mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info) +{ + u32 info = log_info & 0x00FF0000; + char *desc = "unknown"; + + switch (info) { + case 0x00010000: + desc = "bug! MID not found"; + if (ioc->reload_fw == 0) + ioc->reload_fw++; + break; + + case 0x00020000: + desc = "Parity Error"; + break; + + case 0x00030000: + desc = "ASYNC Outbound Overrun"; + break; + + case 0x00040000: + desc = "SYNC Offset Error"; + break; + + case 0x00050000: + desc = "BM Change"; + break; + + case 0x00060000: + desc = "Msg In Overflow"; + break; + + case 0x00070000: + desc = "DMA Error"; + break; + + case 0x00080000: + desc = "Outbound DMA Overrun"; + break; + + case 0x00090000: + desc = "Task Management"; + break; + + case 0x000A0000: + desc = "Device Problem"; + break; + + case 0x000B0000: + desc = "Invalid Phase Change"; + break; + + case 0x000C0000: + desc = "Untagged Table Size"; + break; + + } + + printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC. + * @ioc: Pointer to MPT_ADAPTER structure + * @ioc_status: U32 IOCStatus word from IOC + * @mf: Pointer to MPT request frame + * + * Refer to lsi/mpi.h. + */ +static void +mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) +{ + u32 status = ioc_status & MPI_IOCSTATUS_MASK; + char *desc = ""; + + switch (status) { + case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */ + desc = "Invalid Function"; + break; + + case MPI_IOCSTATUS_BUSY: /* 0x0002 */ + desc = "Busy"; + break; + + case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */ + desc = "Invalid SGL"; + break; + + case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */ + desc = "Internal Error"; + break; + + case MPI_IOCSTATUS_RESERVED: /* 0x0005 */ + desc = "Reserved"; + break; + + case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ + desc = "Insufficient Resources"; + break; + + case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */ + desc = "Invalid Field"; + break; + + case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */ + desc = "Invalid State"; + break; + + case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ + case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ + case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ + case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ + case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ + case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ + /* No message for Config IOCStatus values */ + break; + + case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ + /* No message for recovered error + desc = "SCSI Recovered Error"; + */ + break; + + case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ + desc = "SCSI Invalid Bus"; + break; + + case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ + desc = "SCSI Invalid TargetID"; + break; + + case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ + { + SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf; + U8 cdb = pScsiReq->CDB[0]; + if (cdb != 0x12) { /* Inquiry is issued for device scanning */ + desc = "SCSI Device Not There"; + } + break; + } + + case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ + desc = "SCSI Data Overrun"; + break; + + case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ + /* This error is checked in scsi_io_done(). Skip. + desc = "SCSI Data Underrun"; + */ + break; + + case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ + desc = "SCSI I/O Data Error"; + break; + + case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ + desc = "SCSI Protocol Error"; + break; + + case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ + desc = "SCSI Task Terminated"; + break; + + case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ + desc = "SCSI Residual Mismatch"; + break; + + case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ + desc = "SCSI Task Management Failed"; + break; + + case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ + desc = "SCSI IOC Terminated"; + break; + + case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ + desc = "SCSI Ext Terminated"; + break; + + default: + desc = "Others"; + break; + } + if (desc != "") + printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04x): %s\n", ioc->name, status, desc); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +EXPORT_SYMBOL(ioc_list); +EXPORT_SYMBOL(mpt_proc_root_dir); +EXPORT_SYMBOL(mpt_register); +EXPORT_SYMBOL(mpt_deregister); +EXPORT_SYMBOL(mpt_event_register); +EXPORT_SYMBOL(mpt_event_deregister); +EXPORT_SYMBOL(mpt_reset_register); +EXPORT_SYMBOL(mpt_reset_deregister); +EXPORT_SYMBOL(mpt_device_driver_register); +EXPORT_SYMBOL(mpt_device_driver_deregister); +EXPORT_SYMBOL(mpt_get_msg_frame); +EXPORT_SYMBOL(mpt_put_msg_frame); +EXPORT_SYMBOL(mpt_free_msg_frame); +EXPORT_SYMBOL(mpt_add_sge); +EXPORT_SYMBOL(mpt_send_handshake_request); +EXPORT_SYMBOL(mpt_verify_adapter); +EXPORT_SYMBOL(mpt_GetIocState); +EXPORT_SYMBOL(mpt_print_ioc_summary); +EXPORT_SYMBOL(mpt_lan_index); +EXPORT_SYMBOL(mpt_stm_index); +EXPORT_SYMBOL(mpt_HardResetHandler); +EXPORT_SYMBOL(mpt_config); +EXPORT_SYMBOL(mpt_toolbox); +EXPORT_SYMBOL(mpt_findImVolumes); +EXPORT_SYMBOL(mpt_read_ioc_pg_3); +EXPORT_SYMBOL(mpt_alloc_fw_memory); +EXPORT_SYMBOL(mpt_free_fw_memory); + +static struct pci_driver mptbase_driver = { + .name = "mptbase", + .id_table = mptbase_pci_table, + .probe = mptbase_probe, + .remove = __devexit_p(mptbase_remove), + .driver = { + .shutdown = mptbase_shutdown, + }, +#ifdef CONFIG_PM + .suspend = mptbase_suspend, + .resume = mptbase_resume, +#endif +}; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * fusion_init - Fusion MPT base driver initialization routine. + * + * Returns 0 for success, non-zero for failure. + */ +static int __init +fusion_init(void) +{ + int i; + int r; + + show_mptmod_ver(my_NAME, my_VERSION); + printk(KERN_INFO COPYRIGHT "\n"); + + for (i = 0; i < MPT_MAX_PROTOCOL_DRIVERS; i++) { + MptCallbacks[i] = NULL; + MptDriverClass[i] = MPTUNKNOWN_DRIVER; + MptEvHandlers[i] = NULL; + MptResetHandlers[i] = NULL; + } + + /* NEW! 20010120 -sralston + * Register ourselves (mptbase) in order to facilitate + * EventNotification handling. + */ + mpt_base_index = mpt_register(mpt_base_reply, MPTBASE_DRIVER); + + /* Register for hard reset handling callbacks. + */ + if (mpt_reset_register(mpt_base_index, mpt_ioc_reset) == 0) { + dprintk((KERN_INFO MYNAM ": Register for IOC reset notification\n")); + } else { + /* FIXME! */ + } + +#ifdef CONFIG_PROC_FS + (void) procmpt_create(); +#endif + r = pci_register_driver(&mptbase_driver); + if(r) + return(r); + + return r; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * fusion_exit - Perform driver unload cleanup. + * + * This routine frees all resources associated with each MPT adapter + * and removes all %MPT_PROCFS_MPTBASEDIR entries. + */ +static void __exit +fusion_exit(void) +{ + + dexitprintk((KERN_INFO MYNAM ": fusion_exit() called!\n")); + + pci_unregister_driver(&mptbase_driver); + mpt_reset_deregister(mpt_base_index); + +#ifdef CONFIG_PROC_FS + procmpt_destroy(); +#endif +} + + +module_init(fusion_init); +module_exit(fusion_exit); diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h new file mode 100644 index 000000000000..be673070bc34 --- /dev/null +++ b/drivers/message/fusion/mptbase.h @@ -0,0 +1,1021 @@ +/* + * linux/drivers/message/fusion/mptbase.h + * High performance SCSI + LAN / Fibre Channel device drivers. + * For use with PCI chip/adapter(s): + * LSIFC9xx/LSI409xx Fibre Channel + * running LSI Logic Fusion MPT (Message Passing Technology) firmware. + * + * Credits: + * (see mptbase.c) + * + * Copyright (c) 1999-2004 LSI Logic Corporation + * Originally By: Steven J. Ralston + * (mailto:sjralston1@netscape.net) + * (mailto:mpt_linux_developer@lsil.com) + * + * $Id: mptbase.h,v 1.144 2003/01/28 21:31:56 pdelaney Exp $ + */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + NO WARRANTY + THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + solely responsible for determining the appropriateness of using and + distributing the Program and assumes all risks associated with its + exercise of rights under this Agreement, including but not limited to + the risks and costs of program errors, damage to or loss of data, + programs or equipment, and unavailability or interruption of operations. + + DISCLAIMER OF LIABILITY + NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef MPTBASE_H_INCLUDED +#define MPTBASE_H_INCLUDED +/*{-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +#include <linux/version.h> +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/pci.h> + +#include "lsi/mpi_type.h" +#include "lsi/mpi.h" /* Fusion MPI(nterface) basic defs */ +#include "lsi/mpi_ioc.h" /* Fusion MPT IOC(ontroller) defs */ +#include "lsi/mpi_cnfg.h" /* IOC configuration support */ +#include "lsi/mpi_init.h" /* SCSI Host (initiator) protocol support */ +#include "lsi/mpi_lan.h" /* LAN over FC protocol support */ +#include "lsi/mpi_raid.h" /* Integrated Mirroring support */ + +#include "lsi/mpi_fc.h" /* Fibre Channel (lowlevel) support */ +#include "lsi/mpi_targ.h" /* SCSI/FCP Target protcol support */ +#include "lsi/mpi_tool.h" /* Tools support */ +#include "lsi/fc_log.h" + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +#ifndef MODULEAUTHOR +#define MODULEAUTHOR "LSI Logic Corporation" +#endif + +#ifndef COPYRIGHT +#define COPYRIGHT "Copyright (c) 1999-2004 " MODULEAUTHOR +#endif + +#define MPT_LINUX_VERSION_COMMON "3.01.20" +#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.01.20" +#define WHAT_MAGIC_STRING "@" "(" "#" ")" + +#define show_mptmod_ver(s,ver) \ + printk(KERN_INFO "%s %s\n", s, ver); + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Fusion MPT(linux) driver configurable stuff... + */ +#define MPT_MAX_ADAPTERS 18 +#define MPT_MAX_PROTOCOL_DRIVERS 16 +#define MPT_MAX_BUS 1 /* Do not change */ +#define MPT_MAX_FC_DEVICES 255 +#define MPT_MAX_SCSI_DEVICES 16 +#define MPT_LAST_LUN 255 +#define MPT_SENSE_BUFFER_ALLOC 64 + /* allow for 256 max sense alloc, but only 255 max request */ +#if MPT_SENSE_BUFFER_ALLOC >= 256 +# undef MPT_SENSE_BUFFER_ALLOC +# define MPT_SENSE_BUFFER_ALLOC 256 +# define MPT_SENSE_BUFFER_SIZE 255 +#else +# define MPT_SENSE_BUFFER_SIZE MPT_SENSE_BUFFER_ALLOC +#endif + +#define MPT_NAME_LENGTH 32 + +#define MPT_PROCFS_MPTBASEDIR "mpt" + /* chg it to "driver/fusion" ? */ +#define MPT_PROCFS_SUMMARY_ALL_NODE MPT_PROCFS_MPTBASEDIR "/summary" +#define MPT_PROCFS_SUMMARY_ALL_PATHNAME "/proc/" MPT_PROCFS_SUMMARY_ALL_NODE +#define MPT_FW_REV_MAGIC_ID_STRING "FwRev=" + +#define MPT_MAX_REQ_DEPTH 1023 +#define MPT_DEFAULT_REQ_DEPTH 256 +#define MPT_MIN_REQ_DEPTH 128 + +#define MPT_MAX_REPLY_DEPTH MPT_MAX_REQ_DEPTH +#define MPT_DEFAULT_REPLY_DEPTH 128 +#define MPT_MIN_REPLY_DEPTH 8 +#define MPT_MAX_REPLIES_PER_ISR 32 + +#define MPT_MAX_FRAME_SIZE 128 +#define MPT_DEFAULT_FRAME_SIZE 128 + +#define MPT_REPLY_FRAME_SIZE 0x40 /* Must be a multiple of 8 */ + +#define MPT_SG_REQ_128_SCALE 1 +#define MPT_SG_REQ_96_SCALE 2 +#define MPT_SG_REQ_64_SCALE 4 + +#define CAN_SLEEP 1 +#define NO_SLEEP 0 + +#define MPT_COALESCING_TIMEOUT 0x10 + +/* + * SCSI transfer rate defines. + */ +#define MPT_ULTRA320 0x08 +#define MPT_ULTRA160 0x09 +#define MPT_ULTRA2 0x0A +#define MPT_ULTRA 0x0C +#define MPT_FAST 0x19 +#define MPT_SCSI 0x32 +#define MPT_ASYNC 0xFF + +#define MPT_NARROW 0 +#define MPT_WIDE 1 + +#define C0_1030 0x08 +#define XL_929 0x01 + + +/* + * Try to keep these at 2^N-1 + */ +#define MPT_FC_CAN_QUEUE 127 +#define MPT_SCSI_CAN_QUEUE 127 + +/* + * Set the MAX_SGE value based on user input. + */ +#ifdef CONFIG_FUSION_MAX_SGE +#if CONFIG_FUSION_MAX_SGE < 16 +#define MPT_SCSI_SG_DEPTH 16 +#elif CONFIG_FUSION_MAX_SGE > 128 +#define MPT_SCSI_SG_DEPTH 128 +#else +#define MPT_SCSI_SG_DEPTH CONFIG_FUSION_MAX_SGE +#endif +#else +#define MPT_SCSI_SG_DEPTH 40 +#endif + +#ifdef __KERNEL__ /* { */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +#include <linux/proc_fs.h> + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Attempt semi-consistent error & warning msgs across + * MPT drivers. NOTE: Users of these macro defs must + * themselves define their own MYNAM. + */ +#define MYIOC_s_INFO_FMT KERN_INFO MYNAM ": %s: " +#define MYIOC_s_NOTE_FMT KERN_NOTICE MYNAM ": %s: " +#define MYIOC_s_WARN_FMT KERN_WARNING MYNAM ": %s: WARNING - " +#define MYIOC_s_ERR_FMT KERN_ERR MYNAM ": %s: ERROR - " + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * MPT protocol driver defs... + */ +typedef enum { + MPTBASE_DRIVER, /* MPT base class */ + MPTCTL_DRIVER, /* MPT ioctl class */ + MPTSCSIH_DRIVER, /* MPT SCSI host (initiator) class */ + MPTLAN_DRIVER, /* MPT LAN class */ + MPTSTM_DRIVER, /* MPT SCSI target mode class */ + MPTUNKNOWN_DRIVER +} MPT_DRIVER_CLASS; + +struct mpt_pci_driver{ + int (*probe) (struct pci_dev *dev, const struct pci_device_id *id); + void (*remove) (struct pci_dev *dev); + void (*shutdown) (struct device * dev); +#ifdef CONFIG_PM + int (*resume) (struct pci_dev *dev); + int (*suspend) (struct pci_dev *dev, u32 state); +#endif +}; + +/* + * MPT adapter / port / bus / device info structures... + */ + +typedef union _MPT_FRAME_TRACKER { + struct { + struct list_head list; + u32 arg1; + u32 pad; + void *argp1; + } linkage; + /* + * NOTE: When request frames are free, on the linkage structure + * contets are valid. All other values are invalid. + * In particular, do NOT reply on offset [2] + * (in words) being the * message context. + * The message context must be reset (computed via base address + * + an offset) prior to issuing any command. + * + * NOTE2: On non-32-bit systems, where pointers are LARGE, + * using the linkage pointers destroys our sacred MsgContext + * field contents. But we don't care anymore because these + * are now reset in mpt_put_msg_frame() just prior to sending + * a request off to the IOC. + */ + struct { + u32 __hdr[2]; + /* + * The following _MUST_ match the location of the + * MsgContext field in the MPT message headers. + */ + union { + u32 MsgContext; + struct { + u16 req_idx; /* Request index */ + u8 cb_idx; /* callback function index */ + u8 rsvd; + } fld; + } msgctxu; + } hwhdr; + /* + * Remark: 32 bit identifier: + * 31-24: reserved + * 23-16: call back index + * 15-0 : request index + */ +} MPT_FRAME_TRACKER; + +/* + * We might want to view/access a frame as: + * 1) generic request header + * 2) SCSIIORequest + * 3) SCSIIOReply + * 4) MPIDefaultReply + * 5) frame tracker + */ +typedef struct _MPT_FRAME_HDR { + union { + MPIHeader_t hdr; + SCSIIORequest_t scsireq; + SCSIIOReply_t sreply; + ConfigReply_t configreply; + MPIDefaultReply_t reply; + MPT_FRAME_TRACKER frame; + } u; +} MPT_FRAME_HDR; + +#define MPT_REQ_MSGFLAGS_DROPME 0x80 + +typedef struct _MPT_SGL_HDR { + SGESimple32_t sge[1]; +} MPT_SGL_HDR; + +typedef struct _MPT_SGL64_HDR { + SGESimple64_t sge[1]; +} MPT_SGL64_HDR; + +/* + * System interface register set + */ + +typedef struct _SYSIF_REGS +{ + u32 Doorbell; /* 00 System<->IOC Doorbell reg */ + u32 WriteSequence; /* 04 Write Sequence register */ + u32 Diagnostic; /* 08 Diagnostic register */ + u32 TestBase; /* 0C Test Base Address */ + u32 DiagRwData; /* 10 Read Write Data (fw download) */ + u32 DiagRwAddress; /* 14 Read Write Address (fw download)*/ + u32 Reserved1[6]; /* 18-2F reserved for future use */ + u32 IntStatus; /* 30 Interrupt Status */ + u32 IntMask; /* 34 Interrupt Mask */ + u32 Reserved2[2]; /* 38-3F reserved for future use */ + u32 RequestFifo; /* 40 Request Post/Free FIFO */ + u32 ReplyFifo; /* 44 Reply Post/Free FIFO */ + u32 Reserved3[2]; /* 48-4F reserved for future use */ + u32 HostIndex; /* 50 Host Index register */ + u32 Reserved4[15]; /* 54-8F */ + u32 Fubar; /* 90 For Fubar usage */ + u32 Reserved5[27]; /* 94-FF */ +} SYSIF_REGS; + +/* + * NOTE: Use MPI_{DOORBELL,WRITESEQ,DIAG}_xxx defs in lsi/mpi.h + * in conjunction with SYSIF_REGS accesses! + */ + + +/* + * Dynamic Multi-Pathing specific stuff... + */ + +/* VirtDevice negoFlags field */ +#define MPT_TARGET_NO_NEGO_WIDE 0x01 +#define MPT_TARGET_NO_NEGO_SYNC 0x02 +#define MPT_TARGET_NO_NEGO_QAS 0x04 +#define MPT_TAPE_NEGO_IDP 0x08 + +/* + * VirtDevice - FC LUN device or SCSI target device + */ +typedef struct _VirtDevice { + struct scsi_device *device; + u8 tflags; + u8 ioc_id; + u8 target_id; + u8 bus_id; + u8 minSyncFactor; /* 0xFF is async */ + u8 maxOffset; /* 0 if async */ + u8 maxWidth; /* 0 if narrow, 1 if wide */ + u8 negoFlags; /* bit field, see above */ + u8 raidVolume; /* set, if RAID Volume */ + u8 type; /* byte 0 of Inquiry data */ + u8 cflags; /* controller flags */ + u8 rsvd1raid; + u16 fc_phys_lun; + u16 fc_xlat_lun; + u32 num_luns; + u32 luns[8]; /* Max LUNs is 256 */ + u8 pad[4]; + u8 inq_data[8]; + /* IEEE Registered Extended Identifier + obtained via INQUIRY VPD page 0x83 */ + /* NOTE: Do not separate uniq_prepad and uniq_data + as they are treateed as a single entity in the code */ + u8 uniq_prepad[8]; + u8 uniq_data[20]; + u8 pad2[4]; +} VirtDevice; + +/* + * Fibre Channel (SCSI) target device and associated defines... + */ +#define MPT_TARGET_DEFAULT_DV_STATUS 0x00 +#define MPT_TARGET_FLAGS_VALID_NEGO 0x01 +#define MPT_TARGET_FLAGS_VALID_INQUIRY 0x02 +#define MPT_TARGET_FLAGS_Q_YES 0x08 +#define MPT_TARGET_FLAGS_VALID_56 0x10 +#define MPT_TARGET_FLAGS_SAF_TE_ISSUED 0x20 + +/* + * /proc/mpt interface + */ +typedef struct { + const char *name; + mode_t mode; + int pad; + read_proc_t *read_proc; + write_proc_t *write_proc; +} mpt_proc_entry_t; + +#define MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len) \ +do { \ + len -= offset; \ + if (len < request) { \ + *eof = 1; \ + if (len <= 0) \ + return 0; \ + } else \ + len = request; \ + *start = buf + offset; \ + return len; \ +} while (0) + + +/* + * IOCTL structure and associated defines + */ + +#define MPT_IOCTL_STATUS_DID_IOCRESET 0x01 /* IOC Reset occurred on the current*/ +#define MPT_IOCTL_STATUS_RF_VALID 0x02 /* The Reply Frame is VALID */ +#define MPT_IOCTL_STATUS_TIMER_ACTIVE 0x04 /* The timer is running */ +#define MPT_IOCTL_STATUS_SENSE_VALID 0x08 /* Sense data is valid */ +#define MPT_IOCTL_STATUS_COMMAND_GOOD 0x10 /* Command Status GOOD */ +#define MPT_IOCTL_STATUS_TMTIMER_ACTIVE 0x20 /* The TM timer is running */ +#define MPT_IOCTL_STATUS_TM_FAILED 0x40 /* User TM request failed */ + +#define MPTCTL_RESET_OK 0x01 /* Issue Bus Reset */ + +typedef struct _MPT_IOCTL { + struct _MPT_ADAPTER *ioc; + u8 ReplyFrame[MPT_DEFAULT_FRAME_SIZE]; /* reply frame data */ + u8 sense[MPT_SENSE_BUFFER_ALLOC]; + int wait_done; /* wake-up value for this ioc */ + u8 rsvd; + u8 status; /* current command status */ + u8 reset; /* 1 if bus reset allowed */ + u8 target; /* target for reset */ + struct semaphore sem_ioc; +} MPT_IOCTL; + +/* + * Event Structure and define + */ +#define MPTCTL_EVENT_LOG_SIZE (0x0000000A) +typedef struct _mpt_ioctl_events { + u32 event; /* Specified by define above */ + u32 eventContext; /* Index or counter */ + int data[2]; /* First 8 bytes of Event Data */ +} MPT_IOCTL_EVENTS; + +/* + * CONFIGPARM status defines + */ +#define MPT_CONFIG_GOOD MPI_IOCSTATUS_SUCCESS +#define MPT_CONFIG_ERROR 0x002F + +/* + * Substructure to store SCSI specific configuration page data + */ + /* dvStatus defines: */ +#define MPT_SCSICFG_NEGOTIATE 0x01 /* Negotiate on next IO */ +#define MPT_SCSICFG_NEED_DV 0x02 /* Schedule DV */ +#define MPT_SCSICFG_DV_PENDING 0x04 /* DV on this physical id pending */ +#define MPT_SCSICFG_DV_NOT_DONE 0x08 /* DV has not been performed */ +#define MPT_SCSICFG_BLK_NEGO 0x10 /* WriteSDP1 with WDTR and SDTR disabled */ +#define MPT_SCSICFG_RELOAD_IOC_PG3 0x20 /* IOC Pg 3 data is obsolete */ + /* Args passed to writeSDP1: */ +#define MPT_SCSICFG_USE_NVRAM 0x01 /* WriteSDP1 using NVRAM */ +#define MPT_SCSICFG_ALL_IDS 0x02 /* WriteSDP1 to all IDS */ +/* #define MPT_SCSICFG_BLK_NEGO 0x10 WriteSDP1 with WDTR and SDTR disabled */ + +typedef struct _ScsiCfgData { + u32 PortFlags; + int *nvram; /* table of device NVRAM values */ + IOCPage2_t *pIocPg2; /* table of Raid Volumes */ + IOCPage3_t *pIocPg3; /* table of physical disks */ + IOCPage4_t *pIocPg4; /* SEP devices addressing */ + dma_addr_t IocPg4_dma; /* Phys Addr of IOCPage4 data */ + int IocPg4Sz; /* IOCPage4 size */ + u8 dvStatus[MPT_MAX_SCSI_DEVICES]; + int isRaid; /* bit field, 1 if RAID */ + u8 minSyncFactor; /* 0xFF if async */ + u8 maxSyncOffset; /* 0 if async */ + u8 maxBusWidth; /* 0 if narrow, 1 if wide */ + u8 busType; /* SE, LVD, HD */ + u8 sdp1version; /* SDP1 version */ + u8 sdp1length; /* SDP1 length */ + u8 sdp0version; /* SDP0 version */ + u8 sdp0length; /* SDP0 length */ + u8 dvScheduled; /* 1 if scheduled */ + u8 forceDv; /* 1 to force DV scheduling */ + u8 noQas; /* Disable QAS for this adapter */ + u8 Saf_Te; /* 1 to force all Processors as SAF-TE if Inquiry data length is too short to check for SAF-TE */ + u8 rsvd[1]; +} ScsiCfgData; + +/* + * Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS + */ +typedef struct _MPT_ADAPTER +{ + int id; /* Unique adapter id N {0,1,2,...} */ + int pci_irq; /* This irq */ + char name[MPT_NAME_LENGTH]; /* "iocN" */ + char *prod_name; /* "LSIFC9x9" */ + SYSIF_REGS __iomem *chip; /* == c8817000 (mmap) */ + SYSIF_REGS __iomem *pio_chip; /* Programmed IO (downloadboot) */ + u8 bus_type; + u32 mem_phys; /* == f4020000 (mmap) */ + u32 pio_mem_phys; /* Programmed IO (downloadboot) */ + int mem_size; /* mmap memory size */ + int alloc_total; + u32 last_state; + int active; + u8 *alloc; /* frames alloc ptr */ + dma_addr_t alloc_dma; + u32 alloc_sz; + MPT_FRAME_HDR *reply_frames; /* Reply msg frames - rounded up! */ + u32 reply_frames_low_dma; + int reply_depth; /* Num Allocated reply frames */ + int reply_sz; /* Reply frame size */ + int num_chain; /* Number of chain buffers */ + /* Pool of buffers for chaining. ReqToChain + * and ChainToChain track index of chain buffers. + * ChainBuffer (DMA) virt/phys addresses. + * FreeChainQ (lock) locking mechanisms. + */ + int *ReqToChain; + int *RequestNB; + int *ChainToChain; + u8 *ChainBuffer; + dma_addr_t ChainBufferDMA; + struct list_head FreeChainQ; + spinlock_t FreeChainQlock; + /* We (host driver) get to manage our own RequestQueue! */ + dma_addr_t req_frames_dma; + MPT_FRAME_HDR *req_frames; /* Request msg frames - rounded up! */ + u32 req_frames_low_dma; + int req_depth; /* Number of request frames */ + int req_sz; /* Request frame size (bytes) */ + spinlock_t FreeQlock; + struct list_head FreeQ; + /* Pool of SCSI sense buffers for commands coming from + * the SCSI mid-layer. We have one 256 byte sense buffer + * for each REQ entry. + */ + u8 *sense_buf_pool; + dma_addr_t sense_buf_pool_dma; + u32 sense_buf_low_dma; + int mtrr_reg; + struct pci_dev *pcidev; /* struct pci_dev pointer */ + u8 __iomem *memmap; /* mmap address */ + struct Scsi_Host *sh; /* Scsi Host pointer */ + ScsiCfgData spi_data; /* Scsi config. data */ + MPT_IOCTL *ioctl; /* ioctl data pointer */ + struct proc_dir_entry *ioc_dentry; + struct _MPT_ADAPTER *alt_ioc; /* ptr to 929 bound adapter port */ + spinlock_t diagLock; /* diagnostic reset lock */ + int diagPending; + u32 biosVersion; /* BIOS version from IO Unit Page 2 */ + int eventTypes; /* Event logging parameters */ + int eventContext; /* Next event context */ + int eventLogSize; /* Max number of cached events */ + struct _mpt_ioctl_events *events; /* pointer to event log */ + u8 *cached_fw; /* Pointer to FW */ + dma_addr_t cached_fw_dma; + struct list_head configQ; /* linked list of config. requests */ + int hs_reply_idx; +#ifndef MFCNT + u32 pad0; +#else + u32 mfcnt; +#endif + u32 NB_for_64_byte_frame; + u32 hs_req[MPT_MAX_FRAME_SIZE/sizeof(u32)]; + u16 hs_reply[MPT_MAX_FRAME_SIZE/sizeof(u16)]; + IOCFactsReply_t facts; + PortFactsReply_t pfacts[2]; + FCPortPage0_t fc_port_page0[2]; + LANPage0_t lan_cnfg_page0; + LANPage1_t lan_cnfg_page1; + u8 FirstWhoInit; + u8 upload_fw; /* If set, do a fw upload */ + u8 reload_fw; /* Force a FW Reload on next reset */ + u8 NBShiftFactor; /* NB Shift Factor based on Block Size (Facts) */ + u8 pad1[4]; + struct list_head list; + struct net_device *netdev; +} MPT_ADAPTER; + +/* + * New return value convention: + * 1 = Ok to free associated request frame + * 0 = not Ok ... + */ +typedef int (*MPT_CALLBACK)(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply); +typedef int (*MPT_EVHANDLER)(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply); +typedef int (*MPT_RESETHANDLER)(MPT_ADAPTER *ioc, int reset_phase); +/* reset_phase defs */ +#define MPT_IOC_PRE_RESET 0 +#define MPT_IOC_POST_RESET 1 +#define MPT_IOC_SETUP_RESET 2 + +/* + * Invent MPT host event (super-set of MPI Events) + * Fitted to 1030's 64-byte [max] request frame size + */ +typedef struct _MPT_HOST_EVENT { + EventNotificationReply_t MpiEvent; /* 8 32-bit words! */ + u32 pad[6]; + void *next; +} MPT_HOST_EVENT; + +#define MPT_HOSTEVENT_IOC_BRINGUP 0x91 +#define MPT_HOSTEVENT_IOC_RECOVER 0x92 + +/* Define the generic types based on the size + * of the dma_addr_t type. + */ +typedef struct _mpt_sge { + u32 FlagsLength; + dma_addr_t Address; +} MptSge_t; + +#define mpt_addr_size() \ + ((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SGE_FLAGS_64_BIT_ADDRESSING : \ + MPI_SGE_FLAGS_32_BIT_ADDRESSING) + +#define mpt_msg_flags() \ + ((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : \ + MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32) + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Funky (private) macros... + */ +#ifdef MPT_DEBUG +#define dprintk(x) printk x +#else +#define dprintk(x) +#endif + +#ifdef MPT_DEBUG_INIT +#define dinitprintk(x) printk x +#define DBG_DUMP_FW_REQUEST_FRAME(mfp) \ + { int i, n = 10; \ + u32 *m = (u32 *)(mfp); \ + printk(KERN_INFO " "); \ + for (i=0; i<n; i++) \ + printk(" %08x", le32_to_cpu(m[i])); \ + printk("\n"); \ + } +#else +#define dinitprintk(x) +#define DBG_DUMP_FW_REQUEST_FRAME(mfp) +#endif + +#ifdef MPT_DEBUG_EXIT +#define dexitprintk(x) printk x +#else +#define dexitprintk(x) +#endif + +#if defined MPT_DEBUG_FAIL || defined (MPT_DEBUG_SG) +#define dfailprintk(x) printk x +#else +#define dfailprintk(x) +#endif + +#ifdef MPT_DEBUG_HANDSHAKE +#define dhsprintk(x) printk x +#else +#define dhsprintk(x) +#endif + +#ifdef MPT_DEBUG_EVENTS +#define devtprintk(x) printk x +#else +#define devtprintk(x) +#endif + +#ifdef MPT_DEBUG_RESET +#define drsprintk(x) printk x +#else +#define drsprintk(x) +#endif + +//#if defined(MPT_DEBUG) || defined(MPT_DEBUG_MSG_FRAME) +#if defined(MPT_DEBUG_MSG_FRAME) +#define dmfprintk(x) printk x +#define DBG_DUMP_REQUEST_FRAME(mfp) \ + { int i, n = 24; \ + u32 *m = (u32 *)(mfp); \ + for (i=0; i<n; i++) { \ + if (i && ((i%8)==0)) \ + printk("\n"); \ + printk("%08x ", le32_to_cpu(m[i])); \ + } \ + printk("\n"); \ + } +#else +#define dmfprintk(x) +#define DBG_DUMP_REQUEST_FRAME(mfp) +#endif + +#ifdef MPT_DEBUG_IRQ +#define dirqprintk(x) printk x +#else +#define dirqprintk(x) +#endif + +#ifdef MPT_DEBUG_SG +#define dsgprintk(x) printk x +#else +#define dsgprintk(x) +#endif + +#if defined(MPT_DEBUG_DL) || defined(MPT_DEBUG) +#define ddlprintk(x) printk x +#else +#define ddlprintk(x) +#endif + +#ifdef MPT_DEBUG_DV +#define ddvprintk(x) printk x +#else +#define ddvprintk(x) +#endif + +#ifdef MPT_DEBUG_NEGO +#define dnegoprintk(x) printk x +#else +#define dnegoprintk(x) +#endif + +#if defined(MPT_DEBUG_DV) || defined(MPT_DEBUG_DV_TINY) +#define ddvtprintk(x) printk x +#else +#define ddvtprintk(x) +#endif + +#ifdef MPT_DEBUG_IOCTL +#define dctlprintk(x) printk x +#else +#define dctlprintk(x) +#endif + +#ifdef MPT_DEBUG_REPLY +#define dreplyprintk(x) printk x +#else +#define dreplyprintk(x) +#endif + +#ifdef MPT_DEBUG_TM +#define dtmprintk(x) printk x +#define DBG_DUMP_TM_REQUEST_FRAME(mfp) \ + { u32 *m = (u32 *)(mfp); \ + int i, n = 13; \ + printk("TM_REQUEST:\n"); \ + for (i=0; i<n; i++) { \ + if (i && ((i%8)==0)) \ + printk("\n"); \ + printk("%08x ", le32_to_cpu(m[i])); \ + } \ + printk("\n"); \ + } +#define DBG_DUMP_TM_REPLY_FRAME(mfp) \ + { u32 *m = (u32 *)(mfp); \ + int i, n = (le32_to_cpu(m[0]) & 0x00FF0000) >> 16; \ + printk("TM_REPLY MessageLength=%d:\n", n); \ + for (i=0; i<n; i++) { \ + if (i && ((i%8)==0)) \ + printk("\n"); \ + printk(" %08x", le32_to_cpu(m[i])); \ + } \ + printk("\n"); \ + } +#else +#define dtmprintk(x) +#define DBG_DUMP_TM_REQUEST_FRAME(mfp) +#define DBG_DUMP_TM_REPLY_FRAME(mfp) +#endif + +#ifdef MPT_DEBUG_NEH +#define nehprintk(x) printk x +#else +#define nehprintk(x) +#endif + +#if defined(MPT_DEBUG_CONFIG) || defined(MPT_DEBUG) +#define dcprintk(x) printk x +#else +#define dcprintk(x) +#endif + +#if defined(MPT_DEBUG_SCSI) || defined(MPT_DEBUG) || defined(MPT_DEBUG_MSG_FRAME) +#define dsprintk(x) printk x +#else +#define dsprintk(x) +#endif + + +#define MPT_INDEX_2_MFPTR(ioc,idx) \ + (MPT_FRAME_HDR*)( (u8*)(ioc)->req_frames + (ioc)->req_sz * (idx) ) + +#define MFPTR_2_MPT_INDEX(ioc,mf) \ + (int)( ((u8*)mf - (u8*)(ioc)->req_frames) / (ioc)->req_sz ) + +#define MPT_INDEX_2_RFPTR(ioc,idx) \ + (MPT_FRAME_HDR*)( (u8*)(ioc)->reply_frames + (ioc)->req_sz * (idx) ) + +#if defined(MPT_DEBUG) || defined(MPT_DEBUG_MSG_FRAME) +#define DBG_DUMP_REPLY_FRAME(mfp) \ + { u32 *m = (u32 *)(mfp); \ + int i, n = (le32_to_cpu(m[0]) & 0x00FF0000) >> 16; \ + printk(KERN_INFO " "); \ + for (i=0; i<n; i++) \ + printk(" %08x", le32_to_cpu(m[i])); \ + printk("\n"); \ + } +#define DBG_DUMP_REQUEST_FRAME_HDR(mfp) \ + { int i, n = 3; \ + u32 *m = (u32 *)(mfp); \ + printk(KERN_INFO " "); \ + for (i=0; i<n; i++) \ + printk(" %08x", le32_to_cpu(m[i])); \ + printk("\n"); \ + } +#else +#define DBG_DUMP_REPLY_FRAME(mfp) +#define DBG_DUMP_REQUEST_FRAME_HDR(mfp) +#endif + + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +#define SCSI_STD_SENSE_BYTES 18 +#define SCSI_STD_INQUIRY_BYTES 36 +#define SCSI_MAX_INQUIRY_BYTES 96 + +/* + * MPT_SCSI_HOST defines - Used by the IOCTL and the SCSI drivers + * Private to the driver. + */ +/* LOCAL structure and fields used when processing + * internally generated commands. These include: + * bus scan, dv and config requests. + */ +typedef struct _MPT_LOCAL_REPLY { + ConfigPageHeader_t header; + int completion; + u8 sense[SCSI_STD_SENSE_BYTES]; + u8 scsiStatus; + u8 skip; + u32 pad; +} MPT_LOCAL_REPLY; + +#define MPT_HOST_BUS_UNKNOWN (0xFF) +#define MPT_HOST_TOO_MANY_TM (0x05) +#define MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) +#define MPT_HOST_NO_CHAIN (0xFFFFFFFF) +#define MPT_NVRAM_MASK_TIMEOUT (0x000000FF) +#define MPT_NVRAM_SYNC_MASK (0x0000FF00) +#define MPT_NVRAM_SYNC_SHIFT (8) +#define MPT_NVRAM_DISCONNECT_ENABLE (0x00010000) +#define MPT_NVRAM_ID_SCAN_ENABLE (0x00020000) +#define MPT_NVRAM_LUN_SCAN_ENABLE (0x00040000) +#define MPT_NVRAM_TAG_QUEUE_ENABLE (0x00080000) +#define MPT_NVRAM_WIDE_DISABLE (0x00100000) +#define MPT_NVRAM_BOOT_CHOICE (0x00200000) + +/* The TM_STATE variable is used to provide strict single threading of TM + * requests as well as communicate TM error conditions. + */ +#define TM_STATE_NONE (0) +#define TM_STATE_IN_PROGRESS (1) +#define TM_STATE_ERROR (2) + +typedef enum { + FC, + SCSI, + SAS +} BUS_TYPE; + +typedef struct _MPT_SCSI_HOST { + MPT_ADAPTER *ioc; + int port; + u32 pad0; + struct scsi_cmnd **ScsiLookup; + VirtDevice **Targets; + MPT_LOCAL_REPLY *pLocal; /* used for internal commands */ + struct timer_list timer; + /* Pool of memory for holding SCpnts before doing + * OS callbacks. freeQ is the free pool. + */ + u8 tmPending; + u8 resetPending; + u8 negoNvram; /* DV disabled, nego NVRAM */ + u8 pad1; + u8 tmState; + u8 rsvd[2]; + MPT_FRAME_HDR *cmdPtr; /* Ptr to nonOS request */ + struct scsi_cmnd *abortSCpnt; + MPT_LOCAL_REPLY localReply; /* internal cmd reply struct */ + unsigned long hard_resets; /* driver forced bus resets count */ + unsigned long soft_resets; /* fw/external bus resets count */ + unsigned long timeouts; /* cmd timeouts */ + ushort sel_timeout[MPT_MAX_FC_DEVICES]; +} MPT_SCSI_HOST; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * More Dynamic Multi-Pathing stuff... + */ + +/* Forward decl, a strange C thing, to prevent gcc compiler warnings */ +struct scsi_cmnd; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Generic structure passed to the base mpt_config function. + */ +typedef struct _x_config_parms { + struct list_head linkage; /* linked list */ + struct timer_list timer; /* timer function for this request */ + ConfigPageHeader_t *hdr; + dma_addr_t physAddr; + int wait_done; /* wait for this request */ + u32 pageAddr; /* properly formatted */ + u8 action; + u8 dir; + u8 timeout; /* seconds */ + u8 pad1; + u16 status; + u16 pad2; +} CONFIGPARMS; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Public entry points... + */ +extern int mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass); +extern void mpt_deregister(int cb_idx); +extern int mpt_event_register(int cb_idx, MPT_EVHANDLER ev_cbfunc); +extern void mpt_event_deregister(int cb_idx); +extern int mpt_reset_register(int cb_idx, MPT_RESETHANDLER reset_func); +extern void mpt_reset_deregister(int cb_idx); +extern int mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, int cb_idx); +extern void mpt_device_driver_deregister(int cb_idx); +extern MPT_FRAME_HDR *mpt_get_msg_frame(int handle, MPT_ADAPTER *ioc); +extern void mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf); +extern void mpt_put_msg_frame(int handle, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf); +extern void mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr); + +extern int mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag); +extern int mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp); +extern u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked); +extern void mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buf, int *size, int len, int showlan); +extern int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag); +extern int mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg); +extern int mpt_toolbox(MPT_ADAPTER *ioc, CONFIGPARMS *cfg); +extern void mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size); +extern void mpt_free_fw_memory(MPT_ADAPTER *ioc); +extern int mpt_findImVolumes(MPT_ADAPTER *ioc); +extern int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc); + +/* + * Public data decl's... + */ +extern struct list_head ioc_list; +extern struct proc_dir_entry *mpt_proc_root_dir; + +extern int mpt_lan_index; /* needed by mptlan.c */ +extern int mpt_stm_index; /* needed by mptstm.c */ + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +#endif /* } __KERNEL__ */ + +#if defined(__alpha__) || defined(__sparc_v9__) || defined(__ia64__) || defined(__x86_64__) +#define CAST_U32_TO_PTR(x) ((void *)(u64)x) +#define CAST_PTR_TO_U32(x) ((u32)(u64)x) +#else +#define CAST_U32_TO_PTR(x) ((void *)x) +#define CAST_PTR_TO_U32(x) ((u32)x) +#endif + +#define MPT_PROTOCOL_FLAGS_c_c_c_c(pflags) \ + ((pflags) & MPI_PORTFACTS_PROTOCOL_INITIATOR) ? 'I' : 'i', \ + ((pflags) & MPI_PORTFACTS_PROTOCOL_TARGET) ? 'T' : 't', \ + ((pflags) & MPI_PORTFACTS_PROTOCOL_LAN) ? 'L' : 'l', \ + ((pflags) & MPI_PORTFACTS_PROTOCOL_LOGBUSADDR) ? 'B' : 'b' + +/* + * Shifted SGE Defines - Use in SGE with FlagsLength member. + * Otherwise, use MPI_xxx defines (refer to "lsi/mpi.h" header). + * Defaults: 32 bit SGE, SYSTEM_ADDRESS if direction bit is 0, read + */ +#define MPT_TRANSFER_IOC_TO_HOST (0x00000000) +#define MPT_TRANSFER_HOST_TO_IOC (0x04000000) +#define MPT_SGE_FLAGS_LAST_ELEMENT (0x80000000) +#define MPT_SGE_FLAGS_END_OF_BUFFER (0x40000000) +#define MPT_SGE_FLAGS_LOCAL_ADDRESS (0x08000000) +#define MPT_SGE_FLAGS_DIRECTION (0x04000000) +#define MPT_SGE_FLAGS_ADDRESSING (mpt_addr_size() << MPI_SGE_FLAGS_SHIFT) +#define MPT_SGE_FLAGS_END_OF_LIST (0x01000000) + +#define MPT_SGE_FLAGS_TRANSACTION_ELEMENT (0x00000000) +#define MPT_SGE_FLAGS_SIMPLE_ELEMENT (0x10000000) +#define MPT_SGE_FLAGS_CHAIN_ELEMENT (0x30000000) +#define MPT_SGE_FLAGS_ELEMENT_MASK (0x30000000) + +#define MPT_SGE_FLAGS_SSIMPLE_READ \ + (MPT_SGE_FLAGS_LAST_ELEMENT | \ + MPT_SGE_FLAGS_END_OF_BUFFER | \ + MPT_SGE_FLAGS_END_OF_LIST | \ + MPT_SGE_FLAGS_SIMPLE_ELEMENT | \ + MPT_SGE_FLAGS_ADDRESSING | \ + MPT_TRANSFER_IOC_TO_HOST) +#define MPT_SGE_FLAGS_SSIMPLE_WRITE \ + (MPT_SGE_FLAGS_LAST_ELEMENT | \ + MPT_SGE_FLAGS_END_OF_BUFFER | \ + MPT_SGE_FLAGS_END_OF_LIST | \ + MPT_SGE_FLAGS_SIMPLE_ELEMENT | \ + MPT_SGE_FLAGS_ADDRESSING | \ + MPT_TRANSFER_HOST_TO_IOC) + +/*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +#endif + diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c new file mode 100644 index 000000000000..70b0cfb5ac5c --- /dev/null +++ b/drivers/message/fusion/mptctl.c @@ -0,0 +1,2878 @@ +/* + * linux/drivers/message/fusion/mptctl.c + * Fusion MPT misc device (ioctl) driver. + * For use with PCI chip/adapter(s): + * LSIFC9xx/LSI409xx Fibre Channel + * running LSI Logic Fusion MPT (Message Passing Technology) firmware. + * + * Credits: + * This driver would not exist if not for Alan Cox's development + * of the linux i2o driver. + * + * A special thanks to Pamela Delaney (LSI Logic) for tons of work + * and countless enhancements while adding support for the 1030 + * chip family. Pam has been instrumental in the development of + * of the 2.xx.xx series fusion drivers, and her contributions are + * far too numerous to hope to list in one place. + * + * A huge debt of gratitude is owed to David S. Miller (DaveM) + * for fixing much of the stupid and broken stuff in the early + * driver while porting to sparc64 platform. THANK YOU! + * + * A big THANKS to Eddie C. Dost for fixing the ioctl path + * and most importantly f/w download on sparc64 platform! + * (plus Eddie's other helpful hints and insights) + * + * Thanks to Arnaldo Carvalho de Melo for finding and patching + * a potential memory leak in mptctl_do_fw_download(), + * and for some kmalloc insight:-) + * + * (see also mptbase.c) + * + * Copyright (c) 1999-2004 LSI Logic Corporation + * Originally By: Steven J. Ralston, Noah Romer + * (mailto:sjralston1@netscape.net) + * (mailto:mpt_linux_developer@lsil.com) + * + * $Id: mptctl.c,v 1.63 2002/12/03 21:26:33 pdelaney Exp $ + */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + NO WARRANTY + THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + solely responsible for determining the appropriateness of using and + distributing the Program and assumes all risks associated with its + exercise of rights under this Agreement, including but not limited to + the risks and costs of program errors, damage to or loss of data, + programs or equipment, and unavailability or interruption of operations. + + DISCLAIMER OF LIABILITY + NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/delay.h> /* for mdelay */ +#include <linux/miscdevice.h> +#include <linux/smp_lock.h> +#include <linux/compat.h> + +#include <asm/io.h> +#include <asm/uaccess.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> + +#define COPYRIGHT "Copyright (c) 1999-2004 LSI Logic Corporation" +#define MODULEAUTHOR "Steven J. Ralston, Noah Romer, Pamela Delaney" +#include "mptbase.h" +#include "mptctl.h" + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +#define my_NAME "Fusion MPT misc device (ioctl) driver" +#define my_VERSION MPT_LINUX_VERSION_COMMON +#define MYNAM "mptctl" + +MODULE_AUTHOR(MODULEAUTHOR); +MODULE_DESCRIPTION(my_NAME); +MODULE_LICENSE("GPL"); + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +static int mptctl_id = -1; + +static DECLARE_WAIT_QUEUE_HEAD ( mptctl_wait ); + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +struct buflist { + u8 *kptr; + int len; +}; + +/* + * Function prototypes. Called from OS entry point mptctl_ioctl. + * arg contents specific to function. + */ +static int mptctl_fw_download(unsigned long arg); +static int mptctl_getiocinfo (unsigned long arg, unsigned int cmd); +static int mptctl_gettargetinfo (unsigned long arg); +static int mptctl_readtest (unsigned long arg); +static int mptctl_mpt_command (unsigned long arg); +static int mptctl_eventquery (unsigned long arg); +static int mptctl_eventenable (unsigned long arg); +static int mptctl_eventreport (unsigned long arg); +static int mptctl_replace_fw (unsigned long arg); + +static int mptctl_do_reset(unsigned long arg); +static int mptctl_hp_hostinfo(unsigned long arg, unsigned int cmd); +static int mptctl_hp_targetinfo(unsigned long arg); + +static int mptctl_probe(struct pci_dev *, const struct pci_device_id *); +static void mptctl_remove(struct pci_dev *); + +#ifdef CONFIG_COMPAT +static long compat_mpctl_ioctl(struct file *f, unsigned cmd, unsigned long arg); +#endif +/* + * Private function calls. + */ +static int mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr); +static int mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen); +static MptSge_t *kbuf_alloc_2_sgl( int bytes, u32 dir, int sge_offset, int *frags, + struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc); +static void kfree_sgl( MptSge_t *sgl, dma_addr_t sgl_dma, + struct buflist *buflist, MPT_ADAPTER *ioc); +static void mptctl_timeout_expired (MPT_IOCTL *ioctl); +static int mptctl_bus_reset(MPT_IOCTL *ioctl); +static int mptctl_set_tm_flags(MPT_SCSI_HOST *hd); +static void mptctl_free_tm_flags(MPT_ADAPTER *ioc); + +/* + * Reset Handler cleanup function + */ +static int mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase); + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Scatter gather list (SGL) sizes and limits... + */ +//#define MAX_SCSI_FRAGS 9 +#define MAX_FRAGS_SPILL1 9 +#define MAX_FRAGS_SPILL2 15 +#define FRAGS_PER_BUCKET (MAX_FRAGS_SPILL2 + 1) + +//#define MAX_CHAIN_FRAGS 64 +//#define MAX_CHAIN_FRAGS (15+15+15+16) +#define MAX_CHAIN_FRAGS (4 * MAX_FRAGS_SPILL2 + 1) + +// Define max sg LIST bytes ( == (#frags + #chains) * 8 bytes each) +// Works out to: 592d bytes! (9+1)*8 + 4*(15+1)*8 +// ^----------------- 80 + 512 +#define MAX_SGL_BYTES ((MAX_FRAGS_SPILL1 + 1 + (4 * FRAGS_PER_BUCKET)) * 8) + +/* linux only seems to ever give 128kB MAX contiguous (GFP_USER) mem bytes */ +#define MAX_KMALLOC_SZ (128*1024) + +#define MPT_IOCTL_DEFAULT_TIMEOUT 10 /* Default timeout value (seconds) */ + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptctl_syscall_down - Down the MPT adapter syscall semaphore. + * @ioc: Pointer to MPT adapter + * @nonblock: boolean, non-zero if O_NONBLOCK is set + * + * All of the ioctl commands can potentially sleep, which is illegal + * with a spinlock held, thus we perform mutual exclusion here. + * + * Returns negative errno on error, or zero for success. + */ +static inline int +mptctl_syscall_down(MPT_ADAPTER *ioc, int nonblock) +{ + int rc = 0; + dctlprintk((KERN_INFO MYNAM "::mptctl_syscall_down(%p,%d) called\n", ioc, nonblock)); + + if (nonblock) { + if (down_trylock(&ioc->ioctl->sem_ioc)) + rc = -EAGAIN; + } else { + if (down_interruptible(&ioc->ioctl->sem_ioc)) + rc = -ERESTARTSYS; + } + dctlprintk((KERN_INFO MYNAM "::mptctl_syscall_down return %d\n", rc)); + return rc; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * This is the callback for any message we have posted. The message itself + * will be returned to the message pool when we return from the IRQ + * + * This runs in irq context so be short and sweet. + */ +static int +mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply) +{ + char *sense_data; + int sz, req_index; + u16 iocStatus; + u8 cmd; + + dctlprintk(("mptctl_reply()!\n")); + if (req) + cmd = req->u.hdr.Function; + else + return 1; + + if (ioc->ioctl) { + + if (reply==NULL) { + + dctlprintk(("mptctl_reply() NULL Reply " + "Function=%x!\n", cmd)); + + ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD; + ioc->ioctl->reset &= ~MPTCTL_RESET_OK; + + /* We are done, issue wake up + */ + ioc->ioctl->wait_done = 1; + wake_up (&mptctl_wait); + return 1; + + } + + dctlprintk(("mptctl_reply() with req=%p " + "reply=%p Function=%x!\n", req, reply, cmd)); + + /* Copy the reply frame (which much exist + * for non-SCSI I/O) to the IOC structure. + */ + dctlprintk(("Copying Reply Frame @%p to ioc%d!\n", + reply, ioc->id)); + memcpy(ioc->ioctl->ReplyFrame, reply, + min(ioc->reply_sz, 4*reply->u.reply.MsgLength)); + ioc->ioctl->status |= MPT_IOCTL_STATUS_RF_VALID; + + /* Set the command status to GOOD if IOC Status is GOOD + * OR if SCSI I/O cmd and data underrun or recovered error. + */ + iocStatus = reply->u.reply.IOCStatus & MPI_IOCSTATUS_MASK; + if (iocStatus == MPI_IOCSTATUS_SUCCESS) + ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD; + + if ((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) || + (cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) { + ioc->ioctl->reset &= ~MPTCTL_RESET_OK; + + if ((iocStatus == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN) || + (iocStatus == MPI_IOCSTATUS_SCSI_RECOVERED_ERROR)) { + ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD; + } + } + + /* Copy the sense data - if present + */ + if ((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) && + (reply->u.sreply.SCSIState & + MPI_SCSI_STATE_AUTOSENSE_VALID)){ + sz = req->u.scsireq.SenseBufferLength; + req_index = + le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx); + sense_data = + ((u8 *)ioc->sense_buf_pool + + (req_index * MPT_SENSE_BUFFER_ALLOC)); + memcpy(ioc->ioctl->sense, sense_data, sz); + ioc->ioctl->status |= MPT_IOCTL_STATUS_SENSE_VALID; + } + + if (cmd == MPI_FUNCTION_SCSI_TASK_MGMT) + mptctl_free_tm_flags(ioc); + + /* We are done, issue wake up + */ + ioc->ioctl->wait_done = 1; + wake_up (&mptctl_wait); + } + return 1; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* mptctl_timeout_expired + * + * Expecting an interrupt, however timed out. + * + */ +static void mptctl_timeout_expired (MPT_IOCTL *ioctl) +{ + int rc = 1; + + dctlprintk((KERN_NOTICE MYNAM ": Timeout Expired! Host %d\n", + ioctl->ioc->id)); + if (ioctl == NULL) + return; + + ioctl->wait_done = 0; + if (ioctl->reset & MPTCTL_RESET_OK) + rc = mptctl_bus_reset(ioctl); + + if (rc) { + /* Issue a reset for this device. + * The IOC is not responding. + */ + dctlprintk((MYIOC_s_INFO_FMT "Calling HardReset! \n", + ioctl->ioc->name)); + mpt_HardResetHandler(ioctl->ioc, NO_SLEEP); + } + return; + +} + +/* mptctl_bus_reset + * + * Bus reset code. + * + */ +static int mptctl_bus_reset(MPT_IOCTL *ioctl) +{ + MPT_FRAME_HDR *mf; + SCSITaskMgmt_t *pScsiTm; + MPT_SCSI_HOST *hd; + int ii; + int retval; + + + ioctl->reset &= ~MPTCTL_RESET_OK; + + if (ioctl->ioc->sh == NULL) + return -EPERM; + + hd = (MPT_SCSI_HOST *) ioctl->ioc->sh->hostdata; + if (hd == NULL) + return -EPERM; + + /* Single threading .... + */ + if (mptctl_set_tm_flags(hd) != 0) + return -EPERM; + + /* Send request + */ + if ((mf = mpt_get_msg_frame(mptctl_id, ioctl->ioc)) == NULL) { + dctlprintk((MYIOC_s_WARN_FMT "IssueTaskMgmt, no msg frames!!\n", + ioctl->ioc->name)); + + mptctl_free_tm_flags(ioctl->ioc); + return -ENOMEM; + } + + dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt request @ %p\n", + ioctl->ioc->name, mf)); + + pScsiTm = (SCSITaskMgmt_t *) mf; + pScsiTm->TargetID = ioctl->target; + pScsiTm->Bus = hd->port; /* 0 */ + pScsiTm->ChainOffset = 0; + pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT; + pScsiTm->Reserved = 0; + pScsiTm->TaskType = MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS; + pScsiTm->Reserved1 = 0; + pScsiTm->MsgFlags = MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION; + + for (ii= 0; ii < 8; ii++) + pScsiTm->LUN[ii] = 0; + + for (ii=0; ii < 7; ii++) + pScsiTm->Reserved2[ii] = 0; + + pScsiTm->TaskMsgContext = 0; + dtmprintk((MYIOC_s_INFO_FMT + "mptctl_bus_reset: issued.\n", ioctl->ioc->name)); + + DBG_DUMP_TM_REQUEST_FRAME((u32 *)mf); + + ioctl->wait_done=0; + if ((retval = mpt_send_handshake_request(mptctl_id, ioctl->ioc, + sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP)) != 0) { + dfailprintk((MYIOC_s_ERR_FMT "_send_handshake FAILED!" + " (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd, + hd->ioc, mf)); + goto mptctl_bus_reset_done; + } + + /* Now wait for the command to complete */ + ii = wait_event_interruptible_timeout(mptctl_wait, + ioctl->wait_done == 1, + HZ*5 /* 5 second timeout */); + + if(ii <=0 && (ioctl->wait_done != 1 )) { + ioctl->wait_done = 0; + retval = -1; /* return failure */ + } + +mptctl_bus_reset_done: + + mpt_free_msg_frame(hd->ioc, mf); + mptctl_free_tm_flags(ioctl->ioc); + return retval; +} + +static int +mptctl_set_tm_flags(MPT_SCSI_HOST *hd) { + unsigned long flags; + + spin_lock_irqsave(&hd->ioc->FreeQlock, flags); + + if (hd->tmState == TM_STATE_NONE) { + hd->tmState = TM_STATE_IN_PROGRESS; + hd->tmPending = 1; + spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags); + } else { + spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags); + return -EBUSY; + } + + return 0; +} + +static void +mptctl_free_tm_flags(MPT_ADAPTER *ioc) +{ + MPT_SCSI_HOST * hd; + unsigned long flags; + + hd = (MPT_SCSI_HOST *) ioc->sh->hostdata; + if (hd == NULL) + return; + + spin_lock_irqsave(&ioc->FreeQlock, flags); + + hd->tmState = TM_STATE_NONE; + hd->tmPending = 0; + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + + return; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* mptctl_ioc_reset + * + * Clean-up functionality. Used only if there has been a + * reload of the FW due. + * + */ +static int +mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) +{ + MPT_IOCTL *ioctl = ioc->ioctl; + dctlprintk((KERN_INFO MYNAM ": IOC %s_reset routed to IOCTL driver!\n", + reset_phase==MPT_IOC_SETUP_RESET ? "setup" : ( + reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post"))); + + if(ioctl == NULL) + return 1; + + switch(reset_phase) { + case MPT_IOC_SETUP_RESET: + ioctl->status |= MPT_IOCTL_STATUS_DID_IOCRESET; + break; + case MPT_IOC_POST_RESET: + ioctl->status &= ~MPT_IOCTL_STATUS_DID_IOCRESET; + break; + case MPT_IOC_PRE_RESET: + default: + break; + } + + return 1; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * MPT ioctl handler + * cmd - specify the particular IOCTL command to be issued + * arg - data specific to the command. Must not be null. + */ +static long +__mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + mpt_ioctl_header __user *uhdr = (void __user *) arg; + mpt_ioctl_header khdr; + int iocnum; + unsigned iocnumX; + int nonblock = (file->f_flags & O_NONBLOCK); + int ret; + MPT_ADAPTER *iocp = NULL; + + dctlprintk(("mptctl_ioctl() called\n")); + + if (copy_from_user(&khdr, uhdr, sizeof(khdr))) { + printk(KERN_ERR "%s::mptctl_ioctl() @%d - " + "Unable to copy mpt_ioctl_header data @ %p\n", + __FILE__, __LINE__, uhdr); + return -EFAULT; + } + ret = -ENXIO; /* (-6) No such device or address */ + + /* Verify intended MPT adapter - set iocnum and the adapter + * pointer (iocp) + */ + iocnumX = khdr.iocnum & 0xFF; + if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) || + (iocp == NULL)) { + dctlprintk((KERN_ERR "%s::mptctl_ioctl() @%d - ioc%d not found!\n", + __FILE__, __LINE__, iocnumX)); + return -ENODEV; + } + + if (!iocp->active) { + printk(KERN_ERR "%s::mptctl_ioctl() @%d - Controller disabled.\n", + __FILE__, __LINE__); + return -EFAULT; + } + + /* Handle those commands that are just returning + * information stored in the driver. + * These commands should never time out and are unaffected + * by TM and FW reloads. + */ + if ((cmd & ~IOCSIZE_MASK) == (MPTIOCINFO & ~IOCSIZE_MASK)) { + return mptctl_getiocinfo(arg, _IOC_SIZE(cmd)); + } else if (cmd == MPTTARGETINFO) { + return mptctl_gettargetinfo(arg); + } else if (cmd == MPTTEST) { + return mptctl_readtest(arg); + } else if (cmd == MPTEVENTQUERY) { + return mptctl_eventquery(arg); + } else if (cmd == MPTEVENTENABLE) { + return mptctl_eventenable(arg); + } else if (cmd == MPTEVENTREPORT) { + return mptctl_eventreport(arg); + } else if (cmd == MPTFWREPLACE) { + return mptctl_replace_fw(arg); + } + + /* All of these commands require an interrupt or + * are unknown/illegal. + */ + if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0) + return ret; + + dctlprintk((MYIOC_s_INFO_FMT ": mptctl_ioctl()\n", iocp->name)); + + if (cmd == MPTFWDOWNLOAD) + ret = mptctl_fw_download(arg); + else if (cmd == MPTCOMMAND) + ret = mptctl_mpt_command(arg); + else if (cmd == MPTHARDRESET) + ret = mptctl_do_reset(arg); + else if ((cmd & ~IOCSIZE_MASK) == (HP_GETHOSTINFO & ~IOCSIZE_MASK)) + ret = mptctl_hp_hostinfo(arg, _IOC_SIZE(cmd)); + else if (cmd == HP_GETTARGETINFO) + ret = mptctl_hp_targetinfo(arg); + else + ret = -EINVAL; + + up(&iocp->ioctl->sem_ioc); + + return ret; +} + +static long +mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + long ret; + lock_kernel(); + ret = __mptctl_ioctl(file, cmd, arg); + unlock_kernel(); + return ret; +} + +static int mptctl_do_reset(unsigned long arg) +{ + struct mpt_ioctl_diag_reset __user *urinfo = (void __user *) arg; + struct mpt_ioctl_diag_reset krinfo; + MPT_ADAPTER *iocp; + + dctlprintk((KERN_INFO "mptctl_do_reset called.\n")); + + if (copy_from_user(&krinfo, urinfo, sizeof(struct mpt_ioctl_diag_reset))) { + printk(KERN_ERR "%s@%d::mptctl_do_reset - " + "Unable to copy mpt_ioctl_diag_reset struct @ %p\n", + __FILE__, __LINE__, urinfo); + return -EFAULT; + } + + if (mpt_verify_adapter(krinfo.hdr.iocnum, &iocp) < 0) { + dctlprintk((KERN_ERR "%s@%d::mptctl_do_reset - ioc%d not found!\n", + __FILE__, __LINE__, krinfo.hdr.iocnum)); + return -ENODEV; /* (-6) No such device or address */ + } + + if (mpt_HardResetHandler(iocp, CAN_SLEEP) != 0) { + printk (KERN_ERR "%s@%d::mptctl_do_reset - reset failed.\n", + __FILE__, __LINE__); + return -1; + } + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * MPT FW download function. Cast the arg into the mpt_fw_xfer structure. + * This structure contains: iocnum, firmware length (bytes), + * pointer to user space memory where the fw image is stored. + * + * Outputs: None. + * Return: 0 if successful + * -EFAULT if data unavailable + * -ENXIO if no such device + * -EAGAIN if resource problem + * -ENOMEM if no memory for SGE + * -EMLINK if too many chain buffers required + * -EBADRQC if adapter does not support FW download + * -EBUSY if adapter is busy + * -ENOMSG if FW upload returned bad status + */ +static int +mptctl_fw_download(unsigned long arg) +{ + struct mpt_fw_xfer __user *ufwdl = (void __user *) arg; + struct mpt_fw_xfer kfwdl; + + dctlprintk((KERN_INFO "mptctl_fwdl called. mptctl_id = %xh\n", mptctl_id)); //tc + if (copy_from_user(&kfwdl, ufwdl, sizeof(struct mpt_fw_xfer))) { + printk(KERN_ERR "%s@%d::_ioctl_fwdl - " + "Unable to copy mpt_fw_xfer struct @ %p\n", + __FILE__, __LINE__, ufwdl); + return -EFAULT; + } + + return mptctl_do_fw_download(kfwdl.iocnum, kfwdl.bufp, kfwdl.fwlen); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * FW Download engine. + * Outputs: None. + * Return: 0 if successful + * -EFAULT if data unavailable + * -ENXIO if no such device + * -EAGAIN if resource problem + * -ENOMEM if no memory for SGE + * -EMLINK if too many chain buffers required + * -EBADRQC if adapter does not support FW download + * -EBUSY if adapter is busy + * -ENOMSG if FW upload returned bad status + */ +static int +mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen) +{ + FWDownload_t *dlmsg; + MPT_FRAME_HDR *mf; + MPT_ADAPTER *iocp; + FWDownloadTCSGE_t *ptsge; + MptSge_t *sgl, *sgIn; + char *sgOut; + struct buflist *buflist; + struct buflist *bl; + dma_addr_t sgl_dma; + int ret; + int numfrags = 0; + int maxfrags; + int n = 0; + u32 sgdir; + u32 nib; + int fw_bytes_copied = 0; + int i; + int sge_offset = 0; + u16 iocstat; + pFWDownloadReply_t ReplyMsg = NULL; + + dctlprintk((KERN_INFO "mptctl_do_fwdl called. mptctl_id = %xh.\n", mptctl_id)); + + dctlprintk((KERN_INFO "DbG: kfwdl.bufp = %p\n", ufwbuf)); + dctlprintk((KERN_INFO "DbG: kfwdl.fwlen = %d\n", (int)fwlen)); + dctlprintk((KERN_INFO "DbG: kfwdl.ioc = %04xh\n", ioc)); + + if ((ioc = mpt_verify_adapter(ioc, &iocp)) < 0) { + dctlprintk(("%s@%d::_ioctl_fwdl - ioc%d not found!\n", + __FILE__, __LINE__, ioc)); + return -ENODEV; /* (-6) No such device or address */ + } + + /* Valid device. Get a message frame and construct the FW download message. + */ + if ((mf = mpt_get_msg_frame(mptctl_id, iocp)) == NULL) + return -EAGAIN; + dlmsg = (FWDownload_t*) mf; + ptsge = (FWDownloadTCSGE_t *) &dlmsg->SGL; + sgOut = (char *) (ptsge + 1); + + /* + * Construct f/w download request + */ + dlmsg->ImageType = MPI_FW_DOWNLOAD_ITYPE_FW; + dlmsg->Reserved = 0; + dlmsg->ChainOffset = 0; + dlmsg->Function = MPI_FUNCTION_FW_DOWNLOAD; + dlmsg->Reserved1[0] = dlmsg->Reserved1[1] = dlmsg->Reserved1[2] = 0; + dlmsg->MsgFlags = 0; + + /* Set up the Transaction SGE. + */ + ptsge->Reserved = 0; + ptsge->ContextSize = 0; + ptsge->DetailsLength = 12; + ptsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT; + ptsge->Reserved_0100_Checksum = 0; + ptsge->ImageOffset = 0; + ptsge->ImageSize = cpu_to_le32(fwlen); + + /* Add the SGL + */ + + /* + * Need to kmalloc area(s) for holding firmware image bytes. + * But we need to do it piece meal, using a proper + * scatter gather list (with 128kB MAX hunks). + * + * A practical limit here might be # of sg hunks that fit into + * a single IOC request frame; 12 or 8 (see below), so: + * For FC9xx: 12 x 128kB == 1.5 mB (max) + * For C1030: 8 x 128kB == 1 mB (max) + * We could support chaining, but things get ugly(ier:) + * + * Set the sge_offset to the start of the sgl (bytes). + */ + sgdir = 0x04000000; /* IOC will READ from sys mem */ + sge_offset = sizeof(MPIHeader_t) + sizeof(FWDownloadTCSGE_t); + if ((sgl = kbuf_alloc_2_sgl(fwlen, sgdir, sge_offset, + &numfrags, &buflist, &sgl_dma, iocp)) == NULL) + return -ENOMEM; + + /* + * We should only need SGL with 2 simple_32bit entries (up to 256 kB) + * for FC9xx f/w image, but calculate max number of sge hunks + * we can fit into a request frame, and limit ourselves to that. + * (currently no chain support) + * maxfrags = (Request Size - FWdownload Size ) / Size of 32 bit SGE + * Request maxfrags + * 128 12 + * 96 8 + * 64 4 + */ + maxfrags = (iocp->req_sz - sizeof(MPIHeader_t) - sizeof(FWDownloadTCSGE_t)) + / (sizeof(dma_addr_t) + sizeof(u32)); + if (numfrags > maxfrags) { + ret = -EMLINK; + goto fwdl_out; + } + + dctlprintk((KERN_INFO "DbG: sgl buffer = %p, sgfrags = %d\n", sgl, numfrags)); + + /* + * Parse SG list, copying sgl itself, + * plus f/w image hunks from user space as we go... + */ + ret = -EFAULT; + sgIn = sgl; + bl = buflist; + for (i=0; i < numfrags; i++) { + + /* Get the SGE type: 0 - TCSGE, 3 - Chain, 1 - Simple SGE + * Skip everything but Simple. If simple, copy from + * user space into kernel space. + * Note: we should not have anything but Simple as + * Chain SGE are illegal. + */ + nib = (sgIn->FlagsLength & 0x30000000) >> 28; + if (nib == 0 || nib == 3) { + ; + } else if (sgIn->Address) { + mpt_add_sge(sgOut, sgIn->FlagsLength, sgIn->Address); + n++; + if (copy_from_user(bl->kptr, ufwbuf+fw_bytes_copied, bl->len)) { + printk(KERN_ERR "%s@%d::_ioctl_fwdl - " + "Unable to copy f/w buffer hunk#%d @ %p\n", + __FILE__, __LINE__, n, ufwbuf); + goto fwdl_out; + } + fw_bytes_copied += bl->len; + } + sgIn++; + bl++; + sgOut += (sizeof(dma_addr_t) + sizeof(u32)); + } + +#ifdef MPT_DEBUG + { + u32 *m = (u32 *)mf; + printk(KERN_INFO MYNAM ": F/W download request:\n" KERN_INFO " "); + for (i=0; i < 7+numfrags*2; i++) + printk(" %08x", le32_to_cpu(m[i])); + printk("\n"); + } +#endif + + /* + * Finally, perform firmware download. + */ + iocp->ioctl->wait_done = 0; + mpt_put_msg_frame(mptctl_id, iocp, mf); + + /* Now wait for the command to complete */ + ret = wait_event_interruptible_timeout(mptctl_wait, + iocp->ioctl->wait_done == 1, + HZ*60); + + if(ret <=0 && (iocp->ioctl->wait_done != 1 )) { + /* Now we need to reset the board */ + mptctl_timeout_expired(iocp->ioctl); + ret = -ENODATA; + goto fwdl_out; + } + + if (sgl) + kfree_sgl(sgl, sgl_dma, buflist, iocp); + + ReplyMsg = (pFWDownloadReply_t)iocp->ioctl->ReplyFrame; + iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK; + if (iocstat == MPI_IOCSTATUS_SUCCESS) { + printk(KERN_INFO MYNAM ": F/W update successfully sent to %s!\n", iocp->name); + return 0; + } else if (iocstat == MPI_IOCSTATUS_INVALID_FUNCTION) { + printk(KERN_WARNING MYNAM ": ?Hmmm... %s says it doesn't support F/W download!?!\n", + iocp->name); + printk(KERN_WARNING MYNAM ": (time to go bang on somebodies door)\n"); + return -EBADRQC; + } else if (iocstat == MPI_IOCSTATUS_BUSY) { + printk(KERN_WARNING MYNAM ": Warning! %s says: IOC_BUSY!\n", iocp->name); + printk(KERN_WARNING MYNAM ": (try again later?)\n"); + return -EBUSY; + } else { + printk(KERN_WARNING MYNAM "::ioctl_fwdl() ERROR! %s returned [bad] status = %04xh\n", + iocp->name, iocstat); + printk(KERN_WARNING MYNAM ": (bad VooDoo)\n"); + return -ENOMSG; + } + return 0; + +fwdl_out: + kfree_sgl(sgl, sgl_dma, buflist, iocp); + return ret; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * SGE Allocation routine + * + * Inputs: bytes - number of bytes to be transferred + * sgdir - data direction + * sge_offset - offset (in bytes) from the start of the request + * frame to the first SGE + * ioc - pointer to the mptadapter + * Outputs: frags - number of scatter gather elements + * blp - point to the buflist pointer + * sglbuf_dma - pointer to the (dma) sgl + * Returns: Null if failes + * pointer to the (virtual) sgl if successful. + */ +static MptSge_t * +kbuf_alloc_2_sgl(int bytes, u32 sgdir, int sge_offset, int *frags, + struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc) +{ + MptSge_t *sglbuf = NULL; /* pointer to array of SGE */ + /* and chain buffers */ + struct buflist *buflist = NULL; /* kernel routine */ + MptSge_t *sgl; + int numfrags = 0; + int fragcnt = 0; + int alloc_sz = min(bytes,MAX_KMALLOC_SZ); // avoid kernel warning msg! + int bytes_allocd = 0; + int this_alloc; + dma_addr_t pa; // phys addr + int i, buflist_ent; + int sg_spill = MAX_FRAGS_SPILL1; + int dir; + /* initialization */ + *frags = 0; + *blp = NULL; + + /* Allocate and initialize an array of kernel + * structures for the SG elements. + */ + i = MAX_SGL_BYTES / 8; + buflist = kmalloc(i, GFP_USER); + if (buflist == NULL) + return NULL; + memset(buflist, 0, i); + buflist_ent = 0; + + /* Allocate a single block of memory to store the sg elements and + * the chain buffers. The calling routine is responsible for + * copying the data in this array into the correct place in the + * request and chain buffers. + */ + sglbuf = pci_alloc_consistent(ioc->pcidev, MAX_SGL_BYTES, sglbuf_dma); + if (sglbuf == NULL) + goto free_and_fail; + + if (sgdir & 0x04000000) + dir = PCI_DMA_TODEVICE; + else + dir = PCI_DMA_FROMDEVICE; + + /* At start: + * sgl = sglbuf = point to beginning of sg buffer + * buflist_ent = 0 = first kernel structure + * sg_spill = number of SGE that can be written before the first + * chain element. + * + */ + sgl = sglbuf; + sg_spill = ((ioc->req_sz - sge_offset)/(sizeof(dma_addr_t) + sizeof(u32))) - 1; + while (bytes_allocd < bytes) { + this_alloc = min(alloc_sz, bytes-bytes_allocd); + buflist[buflist_ent].len = this_alloc; + buflist[buflist_ent].kptr = pci_alloc_consistent(ioc->pcidev, + this_alloc, + &pa); + if (buflist[buflist_ent].kptr == NULL) { + alloc_sz = alloc_sz / 2; + if (alloc_sz == 0) { + printk(KERN_WARNING MYNAM "-SG: No can do - " + "not enough memory! :-(\n"); + printk(KERN_WARNING MYNAM "-SG: (freeing %d frags)\n", + numfrags); + goto free_and_fail; + } + continue; + } else { + dma_addr_t dma_addr; + + bytes_allocd += this_alloc; + sgl->FlagsLength = (0x10000000|MPT_SGE_FLAGS_ADDRESSING|sgdir|this_alloc); + dma_addr = pci_map_single(ioc->pcidev, buflist[buflist_ent].kptr, this_alloc, dir); + sgl->Address = dma_addr; + + fragcnt++; + numfrags++; + sgl++; + buflist_ent++; + } + + if (bytes_allocd >= bytes) + break; + + /* Need to chain? */ + if (fragcnt == sg_spill) { + printk(KERN_WARNING MYNAM "-SG: No can do - " "Chain required! :-(\n"); + printk(KERN_WARNING MYNAM "(freeing %d frags)\n", numfrags); + goto free_and_fail; + } + + /* overflow check... */ + if (numfrags*8 > MAX_SGL_BYTES){ + /* GRRRRR... */ + printk(KERN_WARNING MYNAM "-SG: No can do - " + "too many SG frags! :-(\n"); + printk(KERN_WARNING MYNAM "-SG: (freeing %d frags)\n", + numfrags); + goto free_and_fail; + } + } + + /* Last sge fixup: set LE+eol+eob bits */ + sgl[-1].FlagsLength |= 0xC1000000; + + *frags = numfrags; + *blp = buflist; + + dctlprintk((KERN_INFO MYNAM "-SG: kbuf_alloc_2_sgl() - " + "%d SG frags generated!\n", + numfrags)); + + dctlprintk((KERN_INFO MYNAM "-SG: kbuf_alloc_2_sgl() - " + "last (big) alloc_sz=%d\n", + alloc_sz)); + + return sglbuf; + +free_and_fail: + if (sglbuf != NULL) { + int i; + + for (i = 0; i < numfrags; i++) { + dma_addr_t dma_addr; + u8 *kptr; + int len; + + if ((sglbuf[i].FlagsLength >> 24) == 0x30) + continue; + + dma_addr = sglbuf[i].Address; + kptr = buflist[i].kptr; + len = buflist[i].len; + + pci_free_consistent(ioc->pcidev, len, kptr, dma_addr); + } + pci_free_consistent(ioc->pcidev, MAX_SGL_BYTES, sglbuf, *sglbuf_dma); + } + kfree(buflist); + return NULL; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Routine to free the SGL elements. + */ +static void +kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma, struct buflist *buflist, MPT_ADAPTER *ioc) +{ + MptSge_t *sg = sgl; + struct buflist *bl = buflist; + u32 nib; + int dir; + int n = 0; + + if (sg->FlagsLength & 0x04000000) + dir = PCI_DMA_TODEVICE; + else + dir = PCI_DMA_FROMDEVICE; + + nib = (sg->FlagsLength & 0xF0000000) >> 28; + while (! (nib & 0x4)) { /* eob */ + /* skip ignore/chain. */ + if (nib == 0 || nib == 3) { + ; + } else if (sg->Address) { + dma_addr_t dma_addr; + void *kptr; + int len; + + dma_addr = sg->Address; + kptr = bl->kptr; + len = bl->len; + pci_unmap_single(ioc->pcidev, dma_addr, len, dir); + pci_free_consistent(ioc->pcidev, len, kptr, dma_addr); + n++; + } + sg++; + bl++; + nib = (le32_to_cpu(sg->FlagsLength) & 0xF0000000) >> 28; + } + + /* we're at eob! */ + if (sg->Address) { + dma_addr_t dma_addr; + void *kptr; + int len; + + dma_addr = sg->Address; + kptr = bl->kptr; + len = bl->len; + pci_unmap_single(ioc->pcidev, dma_addr, len, dir); + pci_free_consistent(ioc->pcidev, len, kptr, dma_addr); + n++; + } + + pci_free_consistent(ioc->pcidev, MAX_SGL_BYTES, sgl, sgl_dma); + kfree(buflist); + dctlprintk((KERN_INFO MYNAM "-SG: Free'd 1 SGL buf + %d kbufs!\n", n)); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptctl_getiocinfo - Query the host adapter for IOC information. + * @arg: User space argument + * + * Outputs: None. + * Return: 0 if successful + * -EFAULT if data unavailable + * -ENODEV if no such device/adapter + */ +static int +mptctl_getiocinfo (unsigned long arg, unsigned int data_size) +{ + struct mpt_ioctl_iocinfo __user *uarg = (void __user *) arg; + struct mpt_ioctl_iocinfo *karg; + MPT_ADAPTER *ioc; + struct pci_dev *pdev; + struct Scsi_Host *sh; + MPT_SCSI_HOST *hd; + int iocnum; + int numDevices = 0; + unsigned int max_id; + int ii; + int port; + int cim_rev; + u8 revision; + + dctlprintk((": mptctl_getiocinfo called.\n")); + /* Add of PCI INFO results in unaligned access for + * IA64 and Sparc. Reset long to int. Return no PCI + * data for obsolete format. + */ + if (data_size == sizeof(struct mpt_ioctl_iocinfo_rev0)) + cim_rev = 0; + else if (data_size == sizeof(struct mpt_ioctl_iocinfo_rev1)) + cim_rev = 1; + else if (data_size == sizeof(struct mpt_ioctl_iocinfo)) + cim_rev = 2; + else if (data_size == (sizeof(struct mpt_ioctl_iocinfo_rev0)+12)) + cim_rev = 0; /* obsolete */ + else + return -EFAULT; + + karg = kmalloc(data_size, GFP_KERNEL); + if (karg == NULL) { + printk(KERN_ERR "%s::mpt_ioctl_iocinfo() @%d - no memory available!\n", + __FILE__, __LINE__); + return -ENOMEM; + } + + if (copy_from_user(karg, uarg, data_size)) { + printk(KERN_ERR "%s@%d::mptctl_getiocinfo - " + "Unable to read in mpt_ioctl_iocinfo struct @ %p\n", + __FILE__, __LINE__, uarg); + kfree(karg); + return -EFAULT; + } + + if (((iocnum = mpt_verify_adapter(karg->hdr.iocnum, &ioc)) < 0) || + (ioc == NULL)) { + dctlprintk((KERN_ERR "%s::mptctl_getiocinfo() @%d - ioc%d not found!\n", + __FILE__, __LINE__, iocnum)); + kfree(karg); + return -ENODEV; + } + + /* Verify the data transfer size is correct. + * Ignore the port setting. + */ + if (karg->hdr.maxDataSize != data_size) { + printk(KERN_ERR "%s@%d::mptctl_getiocinfo - " + "Structure size mismatch. Command not completed.\n", + __FILE__, __LINE__); + kfree(karg); + return -EFAULT; + } + + /* Fill in the data and return the structure to the calling + * program + */ + if (ioc->bus_type == FC) + karg->adapterType = MPT_IOCTL_INTERFACE_FC; + else + karg->adapterType = MPT_IOCTL_INTERFACE_SCSI; + + port = karg->hdr.port; + + karg->port = port; + pdev = (struct pci_dev *) ioc->pcidev; + + karg->pciId = pdev->device; + pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision); + karg->hwRev = revision; + karg->subSystemDevice = pdev->subsystem_device; + karg->subSystemVendor = pdev->subsystem_vendor; + + if (cim_rev == 1) { + /* Get the PCI bus, device, and function numbers for the IOC + */ + karg->pciInfo.u.bits.busNumber = pdev->bus->number; + karg->pciInfo.u.bits.deviceNumber = PCI_SLOT( pdev->devfn ); + karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn ); + } else if (cim_rev == 2) { + /* Get the PCI bus, device, function and segment ID numbers + for the IOC */ + karg->pciInfo.u.bits.busNumber = pdev->bus->number; + karg->pciInfo.u.bits.deviceNumber = PCI_SLOT( pdev->devfn ); + karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn ); + karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn ); + karg->pciInfo.segmentID = pci_domain_nr(pdev->bus); + } + + /* Get number of devices + */ + if ((sh = ioc->sh) != NULL) { + /* sh->max_id = maximum target ID + 1 + */ + max_id = sh->max_id - 1; + hd = (MPT_SCSI_HOST *) sh->hostdata; + + /* Check all of the target structures and + * keep a counter. + */ + if (hd && hd->Targets) { + for (ii = 0; ii <= max_id; ii++) { + if (hd->Targets[ii]) + numDevices++; + } + } + } + karg->numDevices = numDevices; + + /* Set the BIOS and FW Version + */ + karg->FWVersion = ioc->facts.FWVersion.Word; + karg->BIOSVersion = ioc->biosVersion; + + /* Set the Version Strings. + */ + strncpy (karg->driverVersion, MPT_LINUX_PACKAGE_NAME, MPT_IOCTL_VERSION_LENGTH); + karg->driverVersion[MPT_IOCTL_VERSION_LENGTH-1]='\0'; + + karg->busChangeEvent = 0; + karg->hostId = ioc->pfacts[port].PortSCSIID; + karg->rsvd[0] = karg->rsvd[1] = 0; + + /* Copy the data from kernel memory to user memory + */ + if (copy_to_user((char __user *)arg, karg, data_size)) { + printk(KERN_ERR "%s@%d::mptctl_getiocinfo - " + "Unable to write out mpt_ioctl_iocinfo struct @ %p\n", + __FILE__, __LINE__, uarg); + kfree(karg); + return -EFAULT; + } + + kfree(karg); + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptctl_gettargetinfo - Query the host adapter for target information. + * @arg: User space argument + * + * Outputs: None. + * Return: 0 if successful + * -EFAULT if data unavailable + * -ENODEV if no such device/adapter + */ +static int +mptctl_gettargetinfo (unsigned long arg) +{ + struct mpt_ioctl_targetinfo __user *uarg = (void __user *) arg; + struct mpt_ioctl_targetinfo karg; + MPT_ADAPTER *ioc; + struct Scsi_Host *sh; + MPT_SCSI_HOST *hd; + VirtDevice *vdev; + char *pmem; + int *pdata; + IOCPage2_t *pIoc2; + IOCPage3_t *pIoc3; + int iocnum; + int numDevices = 0; + unsigned int max_id; + int id, jj, indexed_lun, lun_index; + u32 lun; + int maxWordsLeft; + int numBytes; + u8 port, devType, bus_id; + + dctlprintk(("mptctl_gettargetinfo called.\n")); + if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_targetinfo))) { + printk(KERN_ERR "%s@%d::mptctl_gettargetinfo - " + "Unable to read in mpt_ioctl_targetinfo struct @ %p\n", + __FILE__, __LINE__, uarg); + return -EFAULT; + } + + if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || + (ioc == NULL)) { + dctlprintk((KERN_ERR "%s::mptctl_gettargetinfo() @%d - ioc%d not found!\n", + __FILE__, __LINE__, iocnum)); + return -ENODEV; + } + + /* Get the port number and set the maximum number of bytes + * in the returned structure. + * Ignore the port setting. + */ + numBytes = karg.hdr.maxDataSize - sizeof(mpt_ioctl_header); + maxWordsLeft = numBytes/sizeof(int); + port = karg.hdr.port; + + if (maxWordsLeft <= 0) { + printk(KERN_ERR "%s::mptctl_gettargetinfo() @%d - no memory available!\n", + __FILE__, __LINE__); + return -ENOMEM; + } + + /* Fill in the data and return the structure to the calling + * program + */ + + /* struct mpt_ioctl_targetinfo does not contain sufficient space + * for the target structures so when the IOCTL is called, there is + * not sufficient stack space for the structure. Allocate memory, + * populate the memory, copy back to the user, then free memory. + * targetInfo format: + * bits 31-24: reserved + * 23-16: LUN + * 15- 8: Bus Number + * 7- 0: Target ID + */ + pmem = kmalloc(numBytes, GFP_KERNEL); + if (pmem == NULL) { + printk(KERN_ERR "%s::mptctl_gettargetinfo() @%d - no memory available!\n", + __FILE__, __LINE__); + return -ENOMEM; + } + memset(pmem, 0, numBytes); + pdata = (int *) pmem; + + /* Get number of devices + */ + if ((sh = ioc->sh) != NULL) { + + max_id = sh->max_id - 1; + hd = (MPT_SCSI_HOST *) sh->hostdata; + + /* Check all of the target structures. + * Save the Id and increment the counter, + * if ptr non-null. + * sh->max_id = maximum target ID + 1 + */ + if (hd && hd->Targets) { + mpt_findImVolumes(ioc); + pIoc2 = ioc->spi_data.pIocPg2; + for ( id = 0; id <= max_id; ) { + if ( pIoc2 && pIoc2->NumActiveVolumes ) { + if ( id == pIoc2->RaidVolume[0].VolumeID ) { + if (maxWordsLeft <= 0) { + printk(KERN_ERR "mptctl_gettargetinfo - " + "buffer is full but volume is available on ioc %d\n, numDevices=%d", iocnum, numDevices); + goto data_space_full; + } + if ( ( pIoc2->RaidVolume[0].Flags & MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE ) == 0 ) + devType = 0x80; + else + devType = 0xC0; + bus_id = pIoc2->RaidVolume[0].VolumeBus; + numDevices++; + *pdata = ( (devType << 24) | (bus_id << 8) | id ); + dctlprintk((KERN_ERR "mptctl_gettargetinfo - " + "volume ioc=%d target=%x numDevices=%d pdata=%p\n", iocnum, *pdata, numDevices, pdata)); + pdata++; + --maxWordsLeft; + goto next_id; + } else { + pIoc3 = ioc->spi_data.pIocPg3; + for ( jj = 0; jj < pIoc3->NumPhysDisks; jj++ ) { + if ( pIoc3->PhysDisk[jj].PhysDiskID == id ) + goto next_id; + } + } + } + if ( (vdev = hd->Targets[id]) ) { + for (jj = 0; jj <= MPT_LAST_LUN; jj++) { + lun_index = (jj >> 5); + indexed_lun = (jj % 32); + lun = (1 << indexed_lun); + if (vdev->luns[lun_index] & lun) { + if (maxWordsLeft <= 0) { + printk(KERN_ERR "mptctl_gettargetinfo - " + "buffer is full but more targets are available on ioc %d numDevices=%d\n", iocnum, numDevices); + goto data_space_full; + } + bus_id = vdev->bus_id; + numDevices++; + *pdata = ( (jj << 16) | (bus_id << 8) | id ); + dctlprintk((KERN_ERR "mptctl_gettargetinfo - " + "target ioc=%d target=%x numDevices=%d pdata=%p\n", iocnum, *pdata, numDevices, pdata)); + pdata++; + --maxWordsLeft; + } + } + } +next_id: + id++; + } + } + } +data_space_full: + karg.numDevices = numDevices; + + /* Copy part of the data from kernel memory to user memory + */ + if (copy_to_user((char __user *)arg, &karg, + sizeof(struct mpt_ioctl_targetinfo))) { + printk(KERN_ERR "%s@%d::mptctl_gettargetinfo - " + "Unable to write out mpt_ioctl_targetinfo struct @ %p\n", + __FILE__, __LINE__, uarg); + kfree(pmem); + return -EFAULT; + } + + /* Copy the remaining data from kernel memory to user memory + */ + if (copy_to_user(uarg->targetInfo, pmem, numBytes)) { + printk(KERN_ERR "%s@%d::mptctl_gettargetinfo - " + "Unable to write out mpt_ioctl_targetinfo struct @ %p\n", + __FILE__, __LINE__, pdata); + kfree(pmem); + return -EFAULT; + } + + kfree(pmem); + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* MPT IOCTL Test function. + * + * Outputs: None. + * Return: 0 if successful + * -EFAULT if data unavailable + * -ENODEV if no such device/adapter + */ +static int +mptctl_readtest (unsigned long arg) +{ + struct mpt_ioctl_test __user *uarg = (void __user *) arg; + struct mpt_ioctl_test karg; + MPT_ADAPTER *ioc; + int iocnum; + + dctlprintk(("mptctl_readtest called.\n")); + if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_test))) { + printk(KERN_ERR "%s@%d::mptctl_readtest - " + "Unable to read in mpt_ioctl_test struct @ %p\n", + __FILE__, __LINE__, uarg); + return -EFAULT; + } + + if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || + (ioc == NULL)) { + dctlprintk((KERN_ERR "%s::mptctl_readtest() @%d - ioc%d not found!\n", + __FILE__, __LINE__, iocnum)); + return -ENODEV; + } + + /* Fill in the data and return the structure to the calling + * program + */ + +#ifdef MFCNT + karg.chip_type = ioc->mfcnt; +#else + karg.chip_type = ioc->pcidev->device; +#endif + strncpy (karg.name, ioc->name, MPT_MAX_NAME); + karg.name[MPT_MAX_NAME-1]='\0'; + strncpy (karg.product, ioc->prod_name, MPT_PRODUCT_LENGTH); + karg.product[MPT_PRODUCT_LENGTH-1]='\0'; + + /* Copy the data from kernel memory to user memory + */ + if (copy_to_user((char __user *)arg, &karg, sizeof(struct mpt_ioctl_test))) { + printk(KERN_ERR "%s@%d::mptctl_readtest - " + "Unable to write out mpt_ioctl_test struct @ %p\n", + __FILE__, __LINE__, uarg); + return -EFAULT; + } + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptctl_eventquery - Query the host adapter for the event types + * that are being logged. + * @arg: User space argument + * + * Outputs: None. + * Return: 0 if successful + * -EFAULT if data unavailable + * -ENODEV if no such device/adapter + */ +static int +mptctl_eventquery (unsigned long arg) +{ + struct mpt_ioctl_eventquery __user *uarg = (void __user *) arg; + struct mpt_ioctl_eventquery karg; + MPT_ADAPTER *ioc; + int iocnum; + + dctlprintk(("mptctl_eventquery called.\n")); + if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventquery))) { + printk(KERN_ERR "%s@%d::mptctl_eventquery - " + "Unable to read in mpt_ioctl_eventquery struct @ %p\n", + __FILE__, __LINE__, uarg); + return -EFAULT; + } + + if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || + (ioc == NULL)) { + dctlprintk((KERN_ERR "%s::mptctl_eventquery() @%d - ioc%d not found!\n", + __FILE__, __LINE__, iocnum)); + return -ENODEV; + } + + karg.eventEntries = ioc->eventLogSize; + karg.eventTypes = ioc->eventTypes; + + /* Copy the data from kernel memory to user memory + */ + if (copy_to_user((char __user *)arg, &karg, sizeof(struct mpt_ioctl_eventquery))) { + printk(KERN_ERR "%s@%d::mptctl_eventquery - " + "Unable to write out mpt_ioctl_eventquery struct @ %p\n", + __FILE__, __LINE__, uarg); + return -EFAULT; + } + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int +mptctl_eventenable (unsigned long arg) +{ + struct mpt_ioctl_eventenable __user *uarg = (void __user *) arg; + struct mpt_ioctl_eventenable karg; + MPT_ADAPTER *ioc; + int iocnum; + + dctlprintk(("mptctl_eventenable called.\n")); + if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventenable))) { + printk(KERN_ERR "%s@%d::mptctl_eventenable - " + "Unable to read in mpt_ioctl_eventenable struct @ %p\n", + __FILE__, __LINE__, uarg); + return -EFAULT; + } + + if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || + (ioc == NULL)) { + dctlprintk((KERN_ERR "%s::mptctl_eventenable() @%d - ioc%d not found!\n", + __FILE__, __LINE__, iocnum)); + return -ENODEV; + } + + if (ioc->events == NULL) { + /* Have not yet allocated memory - do so now. + */ + int sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS); + ioc->events = kmalloc(sz, GFP_KERNEL); + if (ioc->events == NULL) { + printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n"); + return -ENOMEM; + } + memset(ioc->events, 0, sz); + ioc->alloc_total += sz; + + ioc->eventLogSize = MPTCTL_EVENT_LOG_SIZE; + ioc->eventContext = 0; + } + + /* Update the IOC event logging flag. + */ + ioc->eventTypes = karg.eventTypes; + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int +mptctl_eventreport (unsigned long arg) +{ + struct mpt_ioctl_eventreport __user *uarg = (void __user *) arg; + struct mpt_ioctl_eventreport karg; + MPT_ADAPTER *ioc; + int iocnum; + int numBytes, maxEvents, max; + + dctlprintk(("mptctl_eventreport called.\n")); + if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventreport))) { + printk(KERN_ERR "%s@%d::mptctl_eventreport - " + "Unable to read in mpt_ioctl_eventreport struct @ %p\n", + __FILE__, __LINE__, uarg); + return -EFAULT; + } + + if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || + (ioc == NULL)) { + dctlprintk((KERN_ERR "%s::mptctl_eventreport() @%d - ioc%d not found!\n", + __FILE__, __LINE__, iocnum)); + return -ENODEV; + } + + numBytes = karg.hdr.maxDataSize - sizeof(mpt_ioctl_header); + maxEvents = numBytes/sizeof(MPT_IOCTL_EVENTS); + + + max = ioc->eventLogSize < maxEvents ? ioc->eventLogSize : maxEvents; + + /* If fewer than 1 event is requested, there must have + * been some type of error. + */ + if ((max < 1) || !ioc->events) + return -ENODATA; + + /* Copy the data from kernel memory to user memory + */ + numBytes = max * sizeof(MPT_IOCTL_EVENTS); + if (copy_to_user(uarg->eventData, ioc->events, numBytes)) { + printk(KERN_ERR "%s@%d::mptctl_eventreport - " + "Unable to write out mpt_ioctl_eventreport struct @ %p\n", + __FILE__, __LINE__, ioc->events); + return -EFAULT; + } + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int +mptctl_replace_fw (unsigned long arg) +{ + struct mpt_ioctl_replace_fw __user *uarg = (void __user *) arg; + struct mpt_ioctl_replace_fw karg; + MPT_ADAPTER *ioc; + int iocnum; + int newFwSize; + + dctlprintk(("mptctl_replace_fw called.\n")); + if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_replace_fw))) { + printk(KERN_ERR "%s@%d::mptctl_replace_fw - " + "Unable to read in mpt_ioctl_replace_fw struct @ %p\n", + __FILE__, __LINE__, uarg); + return -EFAULT; + } + + if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || + (ioc == NULL)) { + dctlprintk((KERN_ERR "%s::mptctl_replace_fw() @%d - ioc%d not found!\n", + __FILE__, __LINE__, iocnum)); + return -ENODEV; + } + + /* If caching FW, Free the old FW image + */ + if (ioc->cached_fw == NULL) + return 0; + + mpt_free_fw_memory(ioc); + + /* Allocate memory for the new FW image + */ + newFwSize = karg.newImageSize; + + if (newFwSize & 0x01) + newFwSize += 1; + if (newFwSize & 0x02) + newFwSize += 2; + + mpt_alloc_fw_memory(ioc, newFwSize); + if (ioc->cached_fw == NULL) + return -ENOMEM; + + /* Copy the data from user memory to kernel space + */ + if (copy_from_user(ioc->cached_fw, uarg->newImage, newFwSize)) { + printk(KERN_ERR "%s@%d::mptctl_replace_fw - " + "Unable to read in mpt_ioctl_replace_fw image " + "@ %p\n", __FILE__, __LINE__, uarg); + mpt_free_fw_memory(ioc); + return -EFAULT; + } + + /* Update IOCFactsReply + */ + ioc->facts.FWImageSize = newFwSize; + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* MPT IOCTL MPTCOMMAND function. + * Cast the arg into the mpt_ioctl_mpt_command structure. + * + * Outputs: None. + * Return: 0 if successful + * -EBUSY if previous command timout and IOC reset is not complete. + * -EFAULT if data unavailable + * -ENODEV if no such device/adapter + * -ETIME if timer expires + * -ENOMEM if memory allocation error + */ +static int +mptctl_mpt_command (unsigned long arg) +{ + struct mpt_ioctl_command __user *uarg = (void __user *) arg; + struct mpt_ioctl_command karg; + MPT_ADAPTER *ioc; + int iocnum; + int rc; + + dctlprintk(("mptctl_command called.\n")); + + if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_command))) { + printk(KERN_ERR "%s@%d::mptctl_mpt_command - " + "Unable to read in mpt_ioctl_command struct @ %p\n", + __FILE__, __LINE__, uarg); + return -EFAULT; + } + + if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || + (ioc == NULL)) { + dctlprintk((KERN_ERR "%s::mptctl_mpt_command() @%d - ioc%d not found!\n", + __FILE__, __LINE__, iocnum)); + return -ENODEV; + } + + rc = mptctl_do_mpt_command (karg, &uarg->MF); + + return rc; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* Worker routine for the IOCTL MPTCOMMAND and MPTCOMMAND32 (sparc) commands. + * + * Outputs: None. + * Return: 0 if successful + * -EBUSY if previous command timout and IOC reset is not complete. + * -EFAULT if data unavailable + * -ENODEV if no such device/adapter + * -ETIME if timer expires + * -ENOMEM if memory allocation error + * -EPERM if SCSI I/O and target is untagged + */ +static int +mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr) +{ + MPT_ADAPTER *ioc; + MPT_FRAME_HDR *mf = NULL; + MPIHeader_t *hdr; + char *psge; + struct buflist bufIn; /* data In buffer */ + struct buflist bufOut; /* data Out buffer */ + dma_addr_t dma_addr_in; + dma_addr_t dma_addr_out; + int sgSize = 0; /* Num SG elements */ + int iocnum, flagsLength; + int sz, rc = 0; + int msgContext; + u16 req_idx; + ulong timeout; + + dctlprintk(("mptctl_do_mpt_command called.\n")); + bufIn.kptr = bufOut.kptr = NULL; + + if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || + (ioc == NULL)) { + dctlprintk((KERN_ERR "%s::mptctl_do_mpt_command() @%d - ioc%d not found!\n", + __FILE__, __LINE__, iocnum)); + return -ENODEV; + } + if (!ioc->ioctl) { + printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - " + "No memory available during driver init.\n", + __FILE__, __LINE__); + return -ENOMEM; + } else if (ioc->ioctl->status & MPT_IOCTL_STATUS_DID_IOCRESET) { + printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - " + "Busy with IOC Reset \n", __FILE__, __LINE__); + return -EBUSY; + } + + /* Verify that the final request frame will not be too large. + */ + sz = karg.dataSgeOffset * 4; + if (karg.dataInSize > 0) + sz += sizeof(dma_addr_t) + sizeof(u32); + if (karg.dataOutSize > 0) + sz += sizeof(dma_addr_t) + sizeof(u32); + + if (sz > ioc->req_sz) { + printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - " + "Request frame too large (%d) maximum (%d)\n", + __FILE__, __LINE__, sz, ioc->req_sz); + return -EFAULT; + } + + /* Get a free request frame and save the message context. + */ + if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) + return -EAGAIN; + + hdr = (MPIHeader_t *) mf; + msgContext = le32_to_cpu(hdr->MsgContext); + req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); + + /* Copy the request frame + * Reset the saved message context. + * Request frame in user space + */ + if (copy_from_user(mf, mfPtr, karg.dataSgeOffset * 4)) { + printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - " + "Unable to read MF from mpt_ioctl_command struct @ %p\n", + __FILE__, __LINE__, mfPtr); + rc = -EFAULT; + goto done_free_mem; + } + hdr->MsgContext = cpu_to_le32(msgContext); + + + /* Verify that this request is allowed. + */ + switch (hdr->Function) { + case MPI_FUNCTION_IOC_FACTS: + case MPI_FUNCTION_PORT_FACTS: + karg.dataOutSize = karg.dataInSize = 0; + break; + + case MPI_FUNCTION_CONFIG: + case MPI_FUNCTION_FC_COMMON_TRANSPORT_SEND: + case MPI_FUNCTION_FC_EX_LINK_SRVC_SEND: + case MPI_FUNCTION_FW_UPLOAD: + case MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR: + case MPI_FUNCTION_FW_DOWNLOAD: + case MPI_FUNCTION_FC_PRIMITIVE_SEND: + break; + + case MPI_FUNCTION_SCSI_IO_REQUEST: + if (ioc->sh) { + SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf; + VirtDevice *pTarget = NULL; + MPT_SCSI_HOST *hd = NULL; + int qtag = MPI_SCSIIO_CONTROL_UNTAGGED; + int scsidir = 0; + int target = (int) pScsiReq->TargetID; + int dataSize; + + if ((target < 0) || (target >= ioc->sh->max_id)) { + printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - " + "Target ID out of bounds. \n", + __FILE__, __LINE__); + rc = -ENODEV; + goto done_free_mem; + } + + pScsiReq->MsgFlags = mpt_msg_flags(); + + /* verify that app has not requested + * more sense data than driver + * can provide, if so, reset this parameter + * set the sense buffer pointer low address + * update the control field to specify Q type + */ + if (karg.maxSenseBytes > MPT_SENSE_BUFFER_SIZE) + pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE; + else + pScsiReq->SenseBufferLength = karg.maxSenseBytes; + + pScsiReq->SenseBufferLowAddr = + cpu_to_le32(ioc->sense_buf_low_dma + + (req_idx * MPT_SENSE_BUFFER_ALLOC)); + + if ((hd = (MPT_SCSI_HOST *) ioc->sh->hostdata)) { + if (hd->Targets) + pTarget = hd->Targets[target]; + } + + if (pTarget &&(pTarget->tflags & MPT_TARGET_FLAGS_Q_YES)) + qtag = MPI_SCSIIO_CONTROL_SIMPLEQ; + + /* Have the IOCTL driver set the direction based + * on the dataOutSize (ordering issue with Sparc). + */ + if (karg.dataOutSize > 0) { + scsidir = MPI_SCSIIO_CONTROL_WRITE; + dataSize = karg.dataOutSize; + } else { + scsidir = MPI_SCSIIO_CONTROL_READ; + dataSize = karg.dataInSize; + } + + pScsiReq->Control = cpu_to_le32(scsidir | qtag); + pScsiReq->DataLength = cpu_to_le32(dataSize); + + ioc->ioctl->reset = MPTCTL_RESET_OK; + ioc->ioctl->target = target; + + } else { + printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - " + "SCSI driver is not loaded. \n", + __FILE__, __LINE__); + rc = -EFAULT; + goto done_free_mem; + } + break; + + case MPI_FUNCTION_RAID_ACTION: + /* Just add a SGE + */ + break; + + case MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH: + if (ioc->sh) { + SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf; + int qtag = MPI_SCSIIO_CONTROL_SIMPLEQ; + int scsidir = MPI_SCSIIO_CONTROL_READ; + int dataSize; + + pScsiReq->MsgFlags = mpt_msg_flags(); + + /* verify that app has not requested + * more sense data than driver + * can provide, if so, reset this parameter + * set the sense buffer pointer low address + * update the control field to specify Q type + */ + if (karg.maxSenseBytes > MPT_SENSE_BUFFER_SIZE) + pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE; + else + pScsiReq->SenseBufferLength = karg.maxSenseBytes; + + pScsiReq->SenseBufferLowAddr = + cpu_to_le32(ioc->sense_buf_low_dma + + (req_idx * MPT_SENSE_BUFFER_ALLOC)); + + /* All commands to physical devices are tagged + */ + + /* Have the IOCTL driver set the direction based + * on the dataOutSize (ordering issue with Sparc). + */ + if (karg.dataOutSize > 0) { + scsidir = MPI_SCSIIO_CONTROL_WRITE; + dataSize = karg.dataOutSize; + } else { + scsidir = MPI_SCSIIO_CONTROL_READ; + dataSize = karg.dataInSize; + } + + pScsiReq->Control = cpu_to_le32(scsidir | qtag); + pScsiReq->DataLength = cpu_to_le32(dataSize); + + ioc->ioctl->reset = MPTCTL_RESET_OK; + ioc->ioctl->target = pScsiReq->TargetID; + } else { + printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - " + "SCSI driver is not loaded. \n", + __FILE__, __LINE__); + rc = -EFAULT; + goto done_free_mem; + } + break; + + case MPI_FUNCTION_SCSI_TASK_MGMT: + { + MPT_SCSI_HOST *hd = NULL; + if ((ioc->sh == NULL) || ((hd = (MPT_SCSI_HOST *)ioc->sh->hostdata) == NULL)) { + printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - " + "SCSI driver not loaded or SCSI host not found. \n", + __FILE__, __LINE__); + rc = -EFAULT; + goto done_free_mem; + } else if (mptctl_set_tm_flags(hd) != 0) { + rc = -EPERM; + goto done_free_mem; + } + } + break; + + case MPI_FUNCTION_IOC_INIT: + { + IOCInit_t *pInit = (IOCInit_t *) mf; + u32 high_addr, sense_high; + + /* Verify that all entries in the IOC INIT match + * existing setup (and in LE format). + */ + if (sizeof(dma_addr_t) == sizeof(u64)) { + high_addr = cpu_to_le32((u32)((u64)ioc->req_frames_dma >> 32)); + sense_high= cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32)); + } else { + high_addr = 0; + sense_high= 0; + } + + if ((pInit->Flags != 0) || (pInit->MaxDevices != ioc->facts.MaxDevices) || + (pInit->MaxBuses != ioc->facts.MaxBuses) || + (pInit->ReplyFrameSize != cpu_to_le16(ioc->reply_sz)) || + (pInit->HostMfaHighAddr != high_addr) || + (pInit->SenseBufferHighAddr != sense_high)) { + printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - " + "IOC_INIT issued with 1 or more incorrect parameters. Rejected.\n", + __FILE__, __LINE__); + rc = -EFAULT; + goto done_free_mem; + } + } + break; + default: + /* + * MPI_FUNCTION_PORT_ENABLE + * MPI_FUNCTION_TARGET_CMD_BUFFER_POST + * MPI_FUNCTION_TARGET_ASSIST + * MPI_FUNCTION_TARGET_STATUS_SEND + * MPI_FUNCTION_TARGET_MODE_ABORT + * MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET + * MPI_FUNCTION_IO_UNIT_RESET + * MPI_FUNCTION_HANDSHAKE + * MPI_FUNCTION_REPLY_FRAME_REMOVAL + * MPI_FUNCTION_EVENT_NOTIFICATION + * (driver handles event notification) + * MPI_FUNCTION_EVENT_ACK + */ + + /* What to do with these??? CHECK ME!!! + MPI_FUNCTION_FC_LINK_SRVC_BUF_POST + MPI_FUNCTION_FC_LINK_SRVC_RSP + MPI_FUNCTION_FC_ABORT + MPI_FUNCTION_LAN_SEND + MPI_FUNCTION_LAN_RECEIVE + MPI_FUNCTION_LAN_RESET + */ + + printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - " + "Illegal request (function 0x%x) \n", + __FILE__, __LINE__, hdr->Function); + rc = -EFAULT; + goto done_free_mem; + } + + /* Add the SGL ( at most one data in SGE and one data out SGE ) + * In the case of two SGE's - the data out (write) will always + * preceede the data in (read) SGE. psgList is used to free the + * allocated memory. + */ + psge = (char *) (((int *) mf) + karg.dataSgeOffset); + flagsLength = 0; + + /* bufIn and bufOut are used for user to kernel space transfers + */ + bufIn.kptr = bufOut.kptr = NULL; + bufIn.len = bufOut.len = 0; + + if (karg.dataOutSize > 0) + sgSize ++; + + if (karg.dataInSize > 0) + sgSize ++; + + if (sgSize > 0) { + + /* Set up the dataOut memory allocation */ + if (karg.dataOutSize > 0) { + if (karg.dataInSize > 0) { + flagsLength = ( MPI_SGE_FLAGS_SIMPLE_ELEMENT | + MPI_SGE_FLAGS_END_OF_BUFFER | + MPI_SGE_FLAGS_DIRECTION | + mpt_addr_size() ) + << MPI_SGE_FLAGS_SHIFT; + } else { + flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE; + } + flagsLength |= karg.dataOutSize; + bufOut.len = karg.dataOutSize; + bufOut.kptr = pci_alloc_consistent( + ioc->pcidev, bufOut.len, &dma_addr_out); + + if (bufOut.kptr == NULL) { + rc = -ENOMEM; + goto done_free_mem; + } else { + /* Set up this SGE. + * Copy to MF and to sglbuf + */ + mpt_add_sge(psge, flagsLength, dma_addr_out); + psge += (sizeof(u32) + sizeof(dma_addr_t)); + + /* Copy user data to kernel space. + */ + if (copy_from_user(bufOut.kptr, + karg.dataOutBufPtr, + bufOut.len)) { + printk(KERN_ERR + "%s@%d::mptctl_do_mpt_command - Unable " + "to read user data " + "struct @ %p\n", + __FILE__, __LINE__,karg.dataOutBufPtr); + rc = -EFAULT; + goto done_free_mem; + } + } + } + + if (karg.dataInSize > 0) { + flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ; + flagsLength |= karg.dataInSize; + + bufIn.len = karg.dataInSize; + bufIn.kptr = pci_alloc_consistent(ioc->pcidev, + bufIn.len, &dma_addr_in); + + if (bufIn.kptr == NULL) { + rc = -ENOMEM; + goto done_free_mem; + } else { + /* Set up this SGE + * Copy to MF and to sglbuf + */ + mpt_add_sge(psge, flagsLength, dma_addr_in); + } + } + } else { + /* Add a NULL SGE + */ + mpt_add_sge(psge, flagsLength, (dma_addr_t) -1); + } + + ioc->ioctl->wait_done = 0; + if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT) { + + DBG_DUMP_TM_REQUEST_FRAME((u32 *)mf); + + if (mpt_send_handshake_request(mptctl_id, ioc, + sizeof(SCSITaskMgmt_t), (u32*)mf, + CAN_SLEEP) != 0) { + dfailprintk((MYIOC_s_ERR_FMT "_send_handshake FAILED!" + " (ioc %p, mf %p) \n", ioc->name, + ioc, mf)); + mptctl_free_tm_flags(ioc); + rc = -ENODATA; + goto done_free_mem; + } + + } else + mpt_put_msg_frame(mptctl_id, ioc, mf); + + /* Now wait for the command to complete */ + timeout = (karg.timeout > 0) ? karg.timeout : MPT_IOCTL_DEFAULT_TIMEOUT; + timeout = wait_event_interruptible_timeout(mptctl_wait, + ioc->ioctl->wait_done == 1, + HZ*timeout); + + if(timeout <=0 && (ioc->ioctl->wait_done != 1 )) { + /* Now we need to reset the board */ + + if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT) + mptctl_free_tm_flags(ioc); + + mptctl_timeout_expired(ioc->ioctl); + rc = -ENODATA; + goto done_free_mem; + } + + mf = NULL; + + /* If a valid reply frame, copy to the user. + * Offset 2: reply length in U32's + */ + if (ioc->ioctl->status & MPT_IOCTL_STATUS_RF_VALID) { + if (karg.maxReplyBytes < ioc->reply_sz) { + sz = min(karg.maxReplyBytes, 4*ioc->ioctl->ReplyFrame[2]); + } else { + sz = min(ioc->reply_sz, 4*ioc->ioctl->ReplyFrame[2]); + } + + if (sz > 0) { + if (copy_to_user(karg.replyFrameBufPtr, + &ioc->ioctl->ReplyFrame, sz)){ + printk(KERN_ERR + "%s@%d::mptctl_do_mpt_command - " + "Unable to write out reply frame %p\n", + __FILE__, __LINE__, karg.replyFrameBufPtr); + rc = -ENODATA; + goto done_free_mem; + } + } + } + + /* If valid sense data, copy to user. + */ + if (ioc->ioctl->status & MPT_IOCTL_STATUS_SENSE_VALID) { + sz = min(karg.maxSenseBytes, MPT_SENSE_BUFFER_SIZE); + if (sz > 0) { + if (copy_to_user(karg.senseDataPtr, ioc->ioctl->sense, sz)) { + printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - " + "Unable to write sense data to user %p\n", + __FILE__, __LINE__, + karg.senseDataPtr); + rc = -ENODATA; + goto done_free_mem; + } + } + } + + /* If the overall status is _GOOD and data in, copy data + * to user. + */ + if ((ioc->ioctl->status & MPT_IOCTL_STATUS_COMMAND_GOOD) && + (karg.dataInSize > 0) && (bufIn.kptr)) { + + if (copy_to_user(karg.dataInBufPtr, + bufIn.kptr, karg.dataInSize)) { + printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - " + "Unable to write data to user %p\n", + __FILE__, __LINE__, + karg.dataInBufPtr); + rc = -ENODATA; + } + } + +done_free_mem: + + ioc->ioctl->status &= ~(MPT_IOCTL_STATUS_COMMAND_GOOD | + MPT_IOCTL_STATUS_SENSE_VALID | + MPT_IOCTL_STATUS_RF_VALID ); + + /* Free the allocated memory. + */ + if (bufOut.kptr != NULL) { + pci_free_consistent(ioc->pcidev, + bufOut.len, (void *) bufOut.kptr, dma_addr_out); + } + + if (bufIn.kptr != NULL) { + pci_free_consistent(ioc->pcidev, + bufIn.len, (void *) bufIn.kptr, dma_addr_in); + } + + /* mf is null if command issued successfully + * otherwise, failure occured after mf acquired. + */ + if (mf) + mpt_free_msg_frame(ioc, mf); + + return rc; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* Prototype Routine for the HP HOST INFO command. + * + * Outputs: None. + * Return: 0 if successful + * -EFAULT if data unavailable + * -EBUSY if previous command timout and IOC reset is not complete. + * -ENODEV if no such device/adapter + * -ETIME if timer expires + * -ENOMEM if memory allocation error + */ +static int +mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size) +{ + hp_host_info_t __user *uarg = (void __user *) arg; + MPT_ADAPTER *ioc; + struct pci_dev *pdev; + char *pbuf; + dma_addr_t buf_dma; + hp_host_info_t karg; + CONFIGPARMS cfg; + ConfigPageHeader_t hdr; + int iocnum; + int rc, cim_rev; + + dctlprintk((": mptctl_hp_hostinfo called.\n")); + /* Reset long to int. Should affect IA64 and SPARC only + */ + if (data_size == sizeof(hp_host_info_t)) + cim_rev = 1; + else if (data_size == sizeof(hp_host_info_rev0_t)) + cim_rev = 0; /* obsolete */ + else + return -EFAULT; + + if (copy_from_user(&karg, uarg, sizeof(hp_host_info_t))) { + printk(KERN_ERR "%s@%d::mptctl_hp_host_info - " + "Unable to read in hp_host_info struct @ %p\n", + __FILE__, __LINE__, uarg); + return -EFAULT; + } + + if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || + (ioc == NULL)) { + dctlprintk((KERN_ERR "%s::mptctl_hp_hostinfo() @%d - ioc%d not found!\n", + __FILE__, __LINE__, iocnum)); + return -ENODEV; + } + + /* Fill in the data and return the structure to the calling + * program + */ + pdev = (struct pci_dev *) ioc->pcidev; + + karg.vendor = pdev->vendor; + karg.device = pdev->device; + karg.subsystem_id = pdev->subsystem_device; + karg.subsystem_vendor = pdev->subsystem_vendor; + karg.devfn = pdev->devfn; + karg.bus = pdev->bus->number; + + /* Save the SCSI host no. if + * SCSI driver loaded + */ + if (ioc->sh != NULL) + karg.host_no = ioc->sh->host_no; + else + karg.host_no = -1; + + /* Reformat the fw_version into a string + */ + karg.fw_version[0] = ioc->facts.FWVersion.Struct.Major >= 10 ? + ((ioc->facts.FWVersion.Struct.Major / 10) + '0') : '0'; + karg.fw_version[1] = (ioc->facts.FWVersion.Struct.Major % 10 ) + '0'; + karg.fw_version[2] = '.'; + karg.fw_version[3] = ioc->facts.FWVersion.Struct.Minor >= 10 ? + ((ioc->facts.FWVersion.Struct.Minor / 10) + '0') : '0'; + karg.fw_version[4] = (ioc->facts.FWVersion.Struct.Minor % 10 ) + '0'; + karg.fw_version[5] = '.'; + karg.fw_version[6] = ioc->facts.FWVersion.Struct.Unit >= 10 ? + ((ioc->facts.FWVersion.Struct.Unit / 10) + '0') : '0'; + karg.fw_version[7] = (ioc->facts.FWVersion.Struct.Unit % 10 ) + '0'; + karg.fw_version[8] = '.'; + karg.fw_version[9] = ioc->facts.FWVersion.Struct.Dev >= 10 ? + ((ioc->facts.FWVersion.Struct.Dev / 10) + '0') : '0'; + karg.fw_version[10] = (ioc->facts.FWVersion.Struct.Dev % 10 ) + '0'; + karg.fw_version[11] = '\0'; + + /* Issue a config request to get the device serial number + */ + hdr.PageVersion = 0; + hdr.PageLength = 0; + hdr.PageNumber = 0; + hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING; + cfg.hdr = &hdr; + cfg.physAddr = -1; + cfg.pageAddr = 0; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; /* read */ + cfg.timeout = 10; + + strncpy(karg.serial_number, " ", 24); + if (mpt_config(ioc, &cfg) == 0) { + if (cfg.hdr->PageLength > 0) { + /* Issue the second config page request */ + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + + pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma); + if (pbuf) { + cfg.physAddr = buf_dma; + if (mpt_config(ioc, &cfg) == 0) { + ManufacturingPage0_t *pdata = (ManufacturingPage0_t *) pbuf; + if (strlen(pdata->BoardTracerNumber) > 1) { + strncpy(karg.serial_number, pdata->BoardTracerNumber, 24); + karg.serial_number[24-1]='\0'; + } + } + pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma); + pbuf = NULL; + } + } + } + rc = mpt_GetIocState(ioc, 1); + switch (rc) { + case MPI_IOC_STATE_OPERATIONAL: + karg.ioc_status = HP_STATUS_OK; + break; + + case MPI_IOC_STATE_FAULT: + karg.ioc_status = HP_STATUS_FAILED; + break; + + case MPI_IOC_STATE_RESET: + case MPI_IOC_STATE_READY: + default: + karg.ioc_status = HP_STATUS_OTHER; + break; + } + + karg.base_io_addr = pci_resource_start(pdev, 0); + + if (ioc->bus_type == FC) + karg.bus_phys_width = HP_BUS_WIDTH_UNK; + else + karg.bus_phys_width = HP_BUS_WIDTH_16; + + karg.hard_resets = 0; + karg.soft_resets = 0; + karg.timeouts = 0; + if (ioc->sh != NULL) { + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)ioc->sh->hostdata; + + if (hd && (cim_rev == 1)) { + karg.hard_resets = hd->hard_resets; + karg.soft_resets = hd->soft_resets; + karg.timeouts = hd->timeouts; + } + } + + cfg.pageAddr = 0; + cfg.action = MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL; + cfg.dir = MPI_TB_ISTWI_FLAGS_READ; + cfg.timeout = 10; + pbuf = pci_alloc_consistent(ioc->pcidev, 4, &buf_dma); + if (pbuf) { + cfg.physAddr = buf_dma; + if ((mpt_toolbox(ioc, &cfg)) == 0) { + karg.rsvd = *(u32 *)pbuf; + } + pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma); + pbuf = NULL; + } + + /* Copy the data from kernel memory to user memory + */ + if (copy_to_user((char __user *)arg, &karg, sizeof(hp_host_info_t))) { + printk(KERN_ERR "%s@%d::mptctl_hpgethostinfo - " + "Unable to write out hp_host_info @ %p\n", + __FILE__, __LINE__, uarg); + return -EFAULT; + } + + return 0; + +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* Prototype Routine for the HP TARGET INFO command. + * + * Outputs: None. + * Return: 0 if successful + * -EFAULT if data unavailable + * -EBUSY if previous command timout and IOC reset is not complete. + * -ENODEV if no such device/adapter + * -ETIME if timer expires + * -ENOMEM if memory allocation error + */ +static int +mptctl_hp_targetinfo(unsigned long arg) +{ + hp_target_info_t __user *uarg = (void __user *) arg; + SCSIDevicePage0_t *pg0_alloc; + SCSIDevicePage3_t *pg3_alloc; + MPT_ADAPTER *ioc; + MPT_SCSI_HOST *hd = NULL; + hp_target_info_t karg; + int iocnum; + int data_sz; + dma_addr_t page_dma; + CONFIGPARMS cfg; + ConfigPageHeader_t hdr; + int tmp, np, rc = 0; + + dctlprintk((": mptctl_hp_targetinfo called.\n")); + if (copy_from_user(&karg, uarg, sizeof(hp_target_info_t))) { + printk(KERN_ERR "%s@%d::mptctl_hp_targetinfo - " + "Unable to read in hp_host_targetinfo struct @ %p\n", + __FILE__, __LINE__, uarg); + return -EFAULT; + } + + if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || + (ioc == NULL)) { + dctlprintk((KERN_ERR "%s::mptctl_hp_targetinfo() @%d - ioc%d not found!\n", + __FILE__, __LINE__, iocnum)); + return -ENODEV; + } + + /* There is nothing to do for FCP parts. + */ + if (ioc->bus_type == FC) + return 0; + + if ((ioc->spi_data.sdp0length == 0) || (ioc->sh == NULL)) + return 0; + + if (ioc->sh->host_no != karg.hdr.host) + return -ENODEV; + + /* Get the data transfer speeds + */ + data_sz = ioc->spi_data.sdp0length * 4; + pg0_alloc = (SCSIDevicePage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma); + if (pg0_alloc) { + hdr.PageVersion = ioc->spi_data.sdp0version; + hdr.PageLength = data_sz; + hdr.PageNumber = 0; + hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; + + cfg.hdr = &hdr; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + cfg.dir = 0; + cfg.timeout = 0; + cfg.physAddr = page_dma; + + cfg.pageAddr = (karg.hdr.channel << 8) | karg.hdr.id; + + if ((rc = mpt_config(ioc, &cfg)) == 0) { + np = le32_to_cpu(pg0_alloc->NegotiatedParameters); + karg.negotiated_width = np & MPI_SCSIDEVPAGE0_NP_WIDE ? + HP_BUS_WIDTH_16 : HP_BUS_WIDTH_8; + + if (np & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) { + tmp = (np & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8; + if (tmp < 0x09) + karg.negotiated_speed = HP_DEV_SPEED_ULTRA320; + else if (tmp <= 0x09) + karg.negotiated_speed = HP_DEV_SPEED_ULTRA160; + else if (tmp <= 0x0A) + karg.negotiated_speed = HP_DEV_SPEED_ULTRA2; + else if (tmp <= 0x0C) + karg.negotiated_speed = HP_DEV_SPEED_ULTRA; + else if (tmp <= 0x25) + karg.negotiated_speed = HP_DEV_SPEED_FAST; + else + karg.negotiated_speed = HP_DEV_SPEED_ASYNC; + } else + karg.negotiated_speed = HP_DEV_SPEED_ASYNC; + } + + pci_free_consistent(ioc->pcidev, data_sz, (u8 *) pg0_alloc, page_dma); + } + + /* Set defaults + */ + karg.message_rejects = -1; + karg.phase_errors = -1; + karg.parity_errors = -1; + karg.select_timeouts = -1; + + /* Get the target error parameters + */ + hdr.PageVersion = 0; + hdr.PageLength = 0; + hdr.PageNumber = 3; + hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; + + cfg.hdr = &hdr; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.timeout = 0; + cfg.physAddr = -1; + if ((mpt_config(ioc, &cfg) == 0) && (cfg.hdr->PageLength > 0)) { + /* Issue the second config page request */ + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + data_sz = (int) cfg.hdr->PageLength * 4; + pg3_alloc = (SCSIDevicePage3_t *) pci_alloc_consistent( + ioc->pcidev, data_sz, &page_dma); + if (pg3_alloc) { + cfg.physAddr = page_dma; + cfg.pageAddr = (karg.hdr.channel << 8) | karg.hdr.id; + if ((rc = mpt_config(ioc, &cfg)) == 0) { + karg.message_rejects = (u32) le16_to_cpu(pg3_alloc->MsgRejectCount); + karg.phase_errors = (u32) le16_to_cpu(pg3_alloc->PhaseErrorCount); + karg.parity_errors = (u32) le16_to_cpu(pg3_alloc->ParityErrorCount); + } + pci_free_consistent(ioc->pcidev, data_sz, (u8 *) pg3_alloc, page_dma); + } + } + hd = (MPT_SCSI_HOST *) ioc->sh->hostdata; + if (hd != NULL) + karg.select_timeouts = hd->sel_timeout[karg.hdr.id]; + + /* Copy the data from kernel memory to user memory + */ + if (copy_to_user((char __user *)arg, &karg, sizeof(hp_target_info_t))) { + printk(KERN_ERR "%s@%d::mptctl_hp_target_info - " + "Unable to write out mpt_ioctl_targetinfo struct @ %p\n", + __FILE__, __LINE__, uarg); + return -EFAULT; + } + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +static struct file_operations mptctl_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = mptctl_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = compat_mpctl_ioctl, +#endif +}; + +static struct miscdevice mptctl_miscdev = { + MPT_MINOR, + MYNAM, + &mptctl_fops +}; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +#ifdef CONFIG_COMPAT + +#include <linux/ioctl32.h> + +static int +compat_mptfwxfer_ioctl(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct mpt_fw_xfer32 kfw32; + struct mpt_fw_xfer kfw; + MPT_ADAPTER *iocp = NULL; + int iocnum, iocnumX; + int nonblock = (filp->f_flags & O_NONBLOCK); + int ret; + + dctlprintk((KERN_INFO MYNAM "::compat_mptfwxfer_ioctl() called\n")); + + if (copy_from_user(&kfw32, (char __user *)arg, sizeof(kfw32))) + return -EFAULT; + + /* Verify intended MPT adapter */ + iocnumX = kfw32.iocnum & 0xFF; + if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) || + (iocp == NULL)) { + dctlprintk((KERN_ERR MYNAM "::compat_mptfwxfer_ioctl @%d - ioc%d not found!\n", + __LINE__, iocnumX)); + return -ENODEV; + } + + if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0) + return ret; + + kfw.iocnum = iocnum; + kfw.fwlen = kfw32.fwlen; + kfw.bufp = compat_ptr(kfw32.bufp); + + ret = mptctl_do_fw_download(kfw.iocnum, kfw.bufp, kfw.fwlen); + + up(&iocp->ioctl->sem_ioc); + + return ret; +} + +static int +compat_mpt_command(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct mpt_ioctl_command32 karg32; + struct mpt_ioctl_command32 __user *uarg = (struct mpt_ioctl_command32 __user *) arg; + struct mpt_ioctl_command karg; + MPT_ADAPTER *iocp = NULL; + int iocnum, iocnumX; + int nonblock = (filp->f_flags & O_NONBLOCK); + int ret; + + dctlprintk((KERN_INFO MYNAM "::compat_mpt_command() called\n")); + + if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) + return -EFAULT; + + /* Verify intended MPT adapter */ + iocnumX = karg32.hdr.iocnum & 0xFF; + if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) || + (iocp == NULL)) { + dctlprintk((KERN_ERR MYNAM "::compat_mpt_command @%d - ioc%d not found!\n", + __LINE__, iocnumX)); + return -ENODEV; + } + + if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0) + return ret; + + /* Copy data to karg */ + karg.hdr.iocnum = karg32.hdr.iocnum; + karg.hdr.port = karg32.hdr.port; + karg.timeout = karg32.timeout; + karg.maxReplyBytes = karg32.maxReplyBytes; + + karg.dataInSize = karg32.dataInSize; + karg.dataOutSize = karg32.dataOutSize; + karg.maxSenseBytes = karg32.maxSenseBytes; + karg.dataSgeOffset = karg32.dataSgeOffset; + + karg.replyFrameBufPtr = (char __user *)(unsigned long)karg32.replyFrameBufPtr; + karg.dataInBufPtr = (char __user *)(unsigned long)karg32.dataInBufPtr; + karg.dataOutBufPtr = (char __user *)(unsigned long)karg32.dataOutBufPtr; + karg.senseDataPtr = (char __user *)(unsigned long)karg32.senseDataPtr; + + /* Pass new structure to do_mpt_command + */ + ret = mptctl_do_mpt_command (karg, &uarg->MF); + + up(&iocp->ioctl->sem_ioc); + + return ret; +} + +static long compat_mpctl_ioctl(struct file *f, unsigned int cmd, unsigned long arg) +{ + long ret; + lock_kernel(); + switch (cmd) { + case MPTIOCINFO: + case MPTIOCINFO1: + case MPTIOCINFO2: + case MPTTARGETINFO: + case MPTEVENTQUERY: + case MPTEVENTENABLE: + case MPTEVENTREPORT: + case MPTHARDRESET: + case HP_GETHOSTINFO: + case HP_GETTARGETINFO: + case MPTTEST: + ret = __mptctl_ioctl(f, cmd, arg); + break; + case MPTCOMMAND32: + ret = compat_mpt_command(f, cmd, arg); + break; + case MPTFWDOWNLOAD32: + ret = compat_mptfwxfer_ioctl(f, cmd, arg); + break; + default: + ret = -ENOIOCTLCMD; + break; + } + unlock_kernel(); + return ret; +} + +#endif + + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptctl_probe - Installs ioctl devices per bus. + * @pdev: Pointer to pci_dev structure + * + * Returns 0 for success, non-zero for failure. + * + */ + +static int +mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int err; + int sz; + u8 *mem; + MPT_ADAPTER *ioc = pci_get_drvdata(pdev); + + /* + * Allocate and inite a MPT_IOCTL structure + */ + sz = sizeof (MPT_IOCTL); + mem = kmalloc(sz, GFP_KERNEL); + if (mem == NULL) { + err = -ENOMEM; + goto out_fail; + } + + memset(mem, 0, sz); + ioc->ioctl = (MPT_IOCTL *) mem; + ioc->ioctl->ioc = ioc; + sema_init(&ioc->ioctl->sem_ioc, 1); + return 0; + +out_fail: + + mptctl_remove(pdev); + return err; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptctl_remove - Removed ioctl devices + * @pdev: Pointer to pci_dev structure + * + * + */ +static void +mptctl_remove(struct pci_dev *pdev) +{ + MPT_ADAPTER *ioc = pci_get_drvdata(pdev); + + kfree ( ioc->ioctl ); +} + +static struct mpt_pci_driver mptctl_driver = { + .probe = mptctl_probe, + .remove = mptctl_remove, +}; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int __init mptctl_init(void) +{ + int err; + int where = 1; + + show_mptmod_ver(my_NAME, my_VERSION); + + if(mpt_device_driver_register(&mptctl_driver, + MPTCTL_DRIVER) != 0 ) { + dprintk((KERN_INFO MYNAM + ": failed to register dd callbacks\n")); + } + + /* Register this device */ + err = misc_register(&mptctl_miscdev); + if (err < 0) { + printk(KERN_ERR MYNAM ": Can't register misc device [minor=%d].\n", MPT_MINOR); + goto out_fail; + } + printk(KERN_INFO MYNAM ": Registered with Fusion MPT base driver\n"); + printk(KERN_INFO MYNAM ": /dev/%s @ (major,minor=%d,%d)\n", + mptctl_miscdev.name, MISC_MAJOR, mptctl_miscdev.minor); + + /* + * Install our handler + */ + ++where; + if ((mptctl_id = mpt_register(mptctl_reply, MPTCTL_DRIVER)) < 0) { + printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n"); + misc_deregister(&mptctl_miscdev); + err = -EBUSY; + goto out_fail; + } + + if (mpt_reset_register(mptctl_id, mptctl_ioc_reset) == 0) { + dprintk((KERN_INFO MYNAM ": Registered for IOC reset notifications\n")); + } else { + /* FIXME! */ + } + + return 0; + +out_fail: + + mpt_device_driver_deregister(MPTCTL_DRIVER); + + return err; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static void mptctl_exit(void) +{ + misc_deregister(&mptctl_miscdev); + printk(KERN_INFO MYNAM ": Deregistered /dev/%s @ (major,minor=%d,%d)\n", + mptctl_miscdev.name, MISC_MAJOR, mptctl_miscdev.minor); + + /* De-register reset handler from base module */ + mpt_reset_deregister(mptctl_id); + dprintk((KERN_INFO MYNAM ": Deregistered for IOC reset notifications\n")); + + /* De-register callback handler from base module */ + mpt_deregister(mptctl_id); + printk(KERN_INFO MYNAM ": Deregistered from Fusion MPT base driver\n"); + + mpt_device_driver_deregister(MPTCTL_DRIVER); + +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +module_init(mptctl_init); +module_exit(mptctl_exit); diff --git a/drivers/message/fusion/mptctl.h b/drivers/message/fusion/mptctl.h new file mode 100644 index 000000000000..cc4ecf0382df --- /dev/null +++ b/drivers/message/fusion/mptctl.h @@ -0,0 +1,484 @@ +/* + * linux/drivers/message/fusion/mptioctl.h + * Fusion MPT misc device (ioctl) driver. + * For use with PCI chip/adapter(s): + * LSIFC9xx/LSI409xx Fibre Channel + * running LSI Logic Fusion MPT (Message Passing Technology) firmware. + * + * Credits: + * This driver would not exist if not for Alan Cox's development + * of the linux i2o driver. + * + * A huge debt of gratitude is owed to David S. Miller (DaveM) + * for fixing much of the stupid and broken stuff in the early + * driver while porting to sparc64 platform. THANK YOU! + * + * (see also mptbase.c) + * + * Copyright (c) 1999-2004 LSI Logic Corporation + * Originally By: Steven J. Ralston + * (mailto:sjralston1@netscape.net) + * (mailto:mpt_linux_developer@lsil.com) + * + * $Id: mptctl.h,v 1.13 2002/12/03 21:26:33 pdelaney Exp $ + */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + NO WARRANTY + THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + solely responsible for determining the appropriateness of using and + distributing the Program and assumes all risks associated with its + exercise of rights under this Agreement, including but not limited to + the risks and costs of program errors, damage to or loss of data, + programs or equipment, and unavailability or interruption of operations. + + DISCLAIMER OF LIABILITY + NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef MPTCTL_H_INCLUDED +#define MPTCTL_H_INCLUDED +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +#include "linux/version.h" + + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * + */ +#define MPT_MISCDEV_BASENAME "mptctl" +#define MPT_MISCDEV_PATHNAME "/dev/" MPT_MISCDEV_BASENAME + +#define MPT_PRODUCT_LENGTH 12 + +/* + * Generic MPT Control IOCTLs and structures + */ +#define MPT_MAGIC_NUMBER 'm' + +#define MPTRWPERF _IOWR(MPT_MAGIC_NUMBER,0,struct mpt_raw_r_w) + +#define MPTFWDOWNLOAD _IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer) +#define MPTCOMMAND _IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command) + +#if defined(__KERNEL__) && defined(CONFIG_COMPAT) +#define MPTFWDOWNLOAD32 _IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer32) +#define MPTCOMMAND32 _IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command32) +#endif + +#define MPTIOCINFO _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo) +#define MPTIOCINFO1 _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev0) +#define MPTIOCINFO2 _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev1) +#define MPTTARGETINFO _IOWR(MPT_MAGIC_NUMBER,18,struct mpt_ioctl_targetinfo) +#define MPTTEST _IOWR(MPT_MAGIC_NUMBER,19,struct mpt_ioctl_test) +#define MPTEVENTQUERY _IOWR(MPT_MAGIC_NUMBER,21,struct mpt_ioctl_eventquery) +#define MPTEVENTENABLE _IOWR(MPT_MAGIC_NUMBER,22,struct mpt_ioctl_eventenable) +#define MPTEVENTREPORT _IOWR(MPT_MAGIC_NUMBER,23,struct mpt_ioctl_eventreport) +#define MPTHARDRESET _IOWR(MPT_MAGIC_NUMBER,24,struct mpt_ioctl_diag_reset) +#define MPTFWREPLACE _IOWR(MPT_MAGIC_NUMBER,25,struct mpt_ioctl_replace_fw) + +/* + * SPARC PLATFORM REMARKS: + * IOCTL data structures that contain pointers + * will have different sizes in the driver and applications + * (as the app. will not use 8-byte pointers). + * Apps should use MPTFWDOWNLOAD and MPTCOMMAND. + * The driver will convert data from + * mpt_fw_xfer32 (mpt_ioctl_command32) to mpt_fw_xfer (mpt_ioctl_command) + * internally. + * + * If data structures change size, must handle as in IOCGETINFO. + */ +struct mpt_fw_xfer { + unsigned int iocnum; /* IOC unit number */ + unsigned int fwlen; + void __user *bufp; /* Pointer to firmware buffer */ +}; + +#if defined(__KERNEL__) && defined(CONFIG_COMPAT) +struct mpt_fw_xfer32 { + unsigned int iocnum; + unsigned int fwlen; + u32 bufp; +}; +#endif /*}*/ + +/* + * IOCTL header structure. + * iocnum - must be defined. + * port - must be defined for all IOCTL commands other than MPTIOCINFO + * maxDataSize - ignored on MPTCOMMAND commands + * - ignored on MPTFWREPLACE commands + * - on query commands, reports the maximum number of bytes to be returned + * to the host driver (count includes the header). + * That is, set to sizeof(struct mpt_ioctl_iocinfo) for fixed sized commands. + * Set to sizeof(struct mpt_ioctl_targetinfo) + datasize for variable + * sized commands. (MPTTARGETINFO, MPTEVENTREPORT) + */ +typedef struct _mpt_ioctl_header { + unsigned int iocnum; /* IOC unit number */ + unsigned int port; /* IOC port number */ + int maxDataSize; /* Maximum Num. bytes to transfer on read */ +} mpt_ioctl_header; + +/* + * Issue a diagnostic reset + */ +struct mpt_ioctl_diag_reset { + mpt_ioctl_header hdr; +}; + + +/* + * PCI bus/device/function information structure. + */ +struct mpt_ioctl_pci_info { + union { + struct { + unsigned int deviceNumber : 5; + unsigned int functionNumber : 3; + unsigned int busNumber : 24; + } bits; + unsigned int asUlong; + } u; +}; + +struct mpt_ioctl_pci_info2 { + union { + struct { + unsigned int deviceNumber : 5; + unsigned int functionNumber : 3; + unsigned int busNumber : 24; + } bits; + unsigned int asUlong; + } u; + int segmentID; +}; + +/* + * Adapter Information Page + * Read only. + * Data starts at offset 0xC + */ +#define MPT_IOCTL_INTERFACE_FC (0x01) +#define MPT_IOCTL_INTERFACE_SCSI (0x00) +#define MPT_IOCTL_VERSION_LENGTH (32) + +struct mpt_ioctl_iocinfo { + mpt_ioctl_header hdr; + int adapterType; /* SCSI or FCP */ + int port; /* port number */ + int pciId; /* PCI Id. */ + int hwRev; /* hardware revision */ + int subSystemDevice; /* PCI subsystem Device ID */ + int subSystemVendor; /* PCI subsystem Vendor ID */ + int numDevices; /* number of devices */ + int FWVersion; /* FW Version (integer) */ + int BIOSVersion; /* BIOS Version (integer) */ + char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */ + char busChangeEvent; + char hostId; + char rsvd[2]; + struct mpt_ioctl_pci_info2 pciInfo; /* Added Rev 2 */ +}; + +struct mpt_ioctl_iocinfo_rev1 { + mpt_ioctl_header hdr; + int adapterType; /* SCSI or FCP */ + int port; /* port number */ + int pciId; /* PCI Id. */ + int hwRev; /* hardware revision */ + int subSystemDevice; /* PCI subsystem Device ID */ + int subSystemVendor; /* PCI subsystem Vendor ID */ + int numDevices; /* number of devices */ + int FWVersion; /* FW Version (integer) */ + int BIOSVersion; /* BIOS Version (integer) */ + char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */ + char busChangeEvent; + char hostId; + char rsvd[2]; + struct mpt_ioctl_pci_info pciInfo; /* Added Rev 1 */ +}; + +/* Original structure, must always accept these + * IOCTLs. 4 byte pads can occur based on arch with + * above structure. Wish to re-align, but cannot. + */ +struct mpt_ioctl_iocinfo_rev0 { + mpt_ioctl_header hdr; + int adapterType; /* SCSI or FCP */ + int port; /* port number */ + int pciId; /* PCI Id. */ + int hwRev; /* hardware revision */ + int subSystemDevice; /* PCI subsystem Device ID */ + int subSystemVendor; /* PCI subsystem Vendor ID */ + int numDevices; /* number of devices */ + int FWVersion; /* FW Version (integer) */ + int BIOSVersion; /* BIOS Version (integer) */ + char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */ + char busChangeEvent; + char hostId; + char rsvd[2]; +}; + +/* + * Device Information Page + * Report the number of, and ids of, all targets + * on this IOC. The ids array is a packed structure + * of the known targetInfo. + * bits 31-24: reserved + * 23-16: LUN + * 15- 8: Bus Number + * 7- 0: Target ID + */ +struct mpt_ioctl_targetinfo { + mpt_ioctl_header hdr; + int numDevices; /* Num targets on this ioc */ + int targetInfo[1]; +}; + + +/* + * Event reporting IOCTL's. These IOCTL's will + * use the following defines: + */ +struct mpt_ioctl_eventquery { + mpt_ioctl_header hdr; + unsigned short eventEntries; + unsigned short reserved; + unsigned int eventTypes; +}; + +struct mpt_ioctl_eventenable { + mpt_ioctl_header hdr; + unsigned int eventTypes; +}; + +#ifndef __KERNEL__ +typedef struct { + uint event; + uint eventContext; + uint data[2]; +} MPT_IOCTL_EVENTS; +#endif + +struct mpt_ioctl_eventreport { + mpt_ioctl_header hdr; + MPT_IOCTL_EVENTS eventData[1]; +}; + +#define MPT_MAX_NAME 32 +struct mpt_ioctl_test { + mpt_ioctl_header hdr; + u8 name[MPT_MAX_NAME]; + int chip_type; + u8 product [MPT_PRODUCT_LENGTH]; +}; + +/* Replace the FW image cached in host driver memory + * newImageSize - image size in bytes + * newImage - first byte of the new image + */ +typedef struct mpt_ioctl_replace_fw { + mpt_ioctl_header hdr; + int newImageSize; + u8 newImage[1]; +} mpt_ioctl_replace_fw_t; + +/* General MPT Pass through data strucutre + * + * iocnum + * timeout - in seconds, command timeout. If 0, set by driver to + * default value. + * replyFrameBufPtr - reply location + * dataInBufPtr - destination for read + * dataOutBufPtr - data source for write + * senseDataPtr - sense data location + * maxReplyBytes - maximum number of reply bytes to be sent to app. + * dataInSize - num bytes for data transfer in (read) + * dataOutSize - num bytes for data transfer out (write) + * dataSgeOffset - offset in words from the start of the request message + * to the first SGL + * MF[1]; + * + * Remark: Some config pages have bi-directional transfer, + * both a read and a write. The basic structure allows for + * a bidirectional set up. Normal messages will have one or + * both of these buffers NULL. + */ +struct mpt_ioctl_command { + mpt_ioctl_header hdr; + int timeout; /* optional (seconds) */ + char __user *replyFrameBufPtr; + char __user *dataInBufPtr; + char __user *dataOutBufPtr; + char __user *senseDataPtr; + int maxReplyBytes; + int dataInSize; + int dataOutSize; + int maxSenseBytes; + int dataSgeOffset; + char MF[1]; +}; + +/* + * SPARC PLATFORM: See earlier remark. + */ +#if defined(__KERNEL__) && defined(CONFIG_COMPAT) +struct mpt_ioctl_command32 { + mpt_ioctl_header hdr; + int timeout; + u32 replyFrameBufPtr; + u32 dataInBufPtr; + u32 dataOutBufPtr; + u32 senseDataPtr; + int maxReplyBytes; + int dataInSize; + int dataOutSize; + int maxSenseBytes; + int dataSgeOffset; + char MF[1]; +}; +#endif /*}*/ + + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * HP Specific IOCTL Defines and Structures + */ + +#define CPQFCTS_IOC_MAGIC 'Z' +#define HP_IOC_MAGIC 'Z' +#define HP_GETHOSTINFO _IOR(HP_IOC_MAGIC, 20, hp_host_info_t) +#define HP_GETHOSTINFO1 _IOR(HP_IOC_MAGIC, 20, hp_host_info_rev0_t) +#define HP_GETTARGETINFO _IOR(HP_IOC_MAGIC, 21, hp_target_info_t) + +/* All HP IOCTLs must include this header + */ +typedef struct _hp_header { + unsigned int iocnum; + unsigned int host; + unsigned int channel; + unsigned int id; + unsigned int lun; +} hp_header_t; + +/* + * Header: + * iocnum required (input) + * host ignored + * channe ignored + * id ignored + * lun ignored + */ +typedef struct _hp_host_info { + hp_header_t hdr; + u16 vendor; + u16 device; + u16 subsystem_vendor; + u16 subsystem_id; + u8 devfn; + u8 bus; + ushort host_no; /* SCSI Host number, if scsi driver not loaded*/ + u8 fw_version[16]; /* string */ + u8 serial_number[24]; /* string */ + u32 ioc_status; + u32 bus_phys_width; + u32 base_io_addr; + u32 rsvd; + unsigned int hard_resets; /* driver initiated resets */ + unsigned int soft_resets; /* ioc, external resets */ + unsigned int timeouts; /* num timeouts */ +} hp_host_info_t; + +/* replace ulongs with uints, need to preserve backwards + * compatibility. + */ +typedef struct _hp_host_info_rev0 { + hp_header_t hdr; + u16 vendor; + u16 device; + u16 subsystem_vendor; + u16 subsystem_id; + u8 devfn; + u8 bus; + ushort host_no; /* SCSI Host number, if scsi driver not loaded*/ + u8 fw_version[16]; /* string */ + u8 serial_number[24]; /* string */ + u32 ioc_status; + u32 bus_phys_width; + u32 base_io_addr; + u32 rsvd; + unsigned long hard_resets; /* driver initiated resets */ + unsigned long soft_resets; /* ioc, external resets */ + unsigned long timeouts; /* num timeouts */ +} hp_host_info_rev0_t; + +/* + * Header: + * iocnum required (input) + * host required + * channel required (bus number) + * id required + * lun ignored + * + * All error values between 0 and 0xFFFF in size. + */ +typedef struct _hp_target_info { + hp_header_t hdr; + u32 parity_errors; + u32 phase_errors; + u32 select_timeouts; + u32 message_rejects; + u32 negotiated_speed; + u8 negotiated_width; + u8 rsvd[7]; /* 8 byte alignment */ +} hp_target_info_t; + +#define HP_STATUS_OTHER 1 +#define HP_STATUS_OK 2 +#define HP_STATUS_FAILED 3 + +#define HP_BUS_WIDTH_UNK 1 +#define HP_BUS_WIDTH_8 2 +#define HP_BUS_WIDTH_16 3 +#define HP_BUS_WIDTH_32 4 + +#define HP_DEV_SPEED_ASYNC 2 +#define HP_DEV_SPEED_FAST 3 +#define HP_DEV_SPEED_ULTRA 4 +#define HP_DEV_SPEED_ULTRA2 5 +#define HP_DEV_SPEED_ULTRA160 6 +#define HP_DEV_SPEED_SCSI1 7 +#define HP_DEV_SPEED_ULTRA320 8 + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +#endif + diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c new file mode 100644 index 000000000000..ef2713b93fab --- /dev/null +++ b/drivers/message/fusion/mptlan.c @@ -0,0 +1,1688 @@ +/* + * linux/drivers/message/fusion/mptlan.c + * IP Over Fibre Channel device driver. + * For use with PCI chip/adapter(s): + * LSIFC9xx/LSI409xx Fibre Channel + * running LSI Logic Fusion MPT (Message Passing Technology) firmware. + * + * Credits: + * This driver would not exist if not for Alan Cox's development + * of the linux i2o driver. + * + * Special thanks goes to the I2O LAN driver people at the + * University of Helsinki, who, unbeknownst to them, provided + * the inspiration and initial structure for this driver. + * + * A huge debt of gratitude is owed to David S. Miller (DaveM) + * for fixing much of the stupid and broken stuff in the early + * driver while porting to sparc64 platform. THANK YOU! + * + * A really huge debt of gratitude is owed to Eddie C. Dost + * for gobs of hard work fixing and optimizing LAN code. + * THANK YOU! + * + * (see also mptbase.c) + * + * Copyright (c) 2000-2004 LSI Logic Corporation + * Originally By: Noah Romer + * (mailto:mpt_linux_developer@lsil.com) + * + * $Id: mptlan.c,v 1.53 2002/10/17 20:15:58 pdelaney Exp $ + */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + NO WARRANTY + THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + solely responsible for determining the appropriateness of using and + distributing the Program and assumes all risks associated with its + exercise of rights under this Agreement, including but not limited to + the risks and costs of program errors, damage to or loss of data, + programs or equipment, and unavailability or interruption of operations. + + DISCLAIMER OF LIABILITY + NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Define statements used for debugging + */ +//#define MPT_LAN_IO_DEBUG + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +#include "mptlan.h" +#include <linux/init.h> +#include <linux/module.h> +#include <linux/fs.h> + +#define MYNAM "mptlan" + +MODULE_LICENSE("GPL"); + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * MPT LAN message sizes without variable part. + */ +#define MPT_LAN_RECEIVE_POST_REQUEST_SIZE \ + (sizeof(LANReceivePostRequest_t) - sizeof(SGE_MPI_UNION)) + +#define MPT_LAN_TRANSACTION32_SIZE \ + (sizeof(SGETransaction32_t) - sizeof(u32)) + +/* + * Fusion MPT LAN private structures + */ + +struct NAA_Hosed { + u16 NAA; + u8 ieee[FC_ALEN]; + struct NAA_Hosed *next; +}; + +struct BufferControl { + struct sk_buff *skb; + dma_addr_t dma; + unsigned int len; +}; + +struct mpt_lan_priv { + MPT_ADAPTER *mpt_dev; + u8 pnum; /* Port number in the IOC. This is not a Unix network port! */ + + atomic_t buckets_out; /* number of unused buckets on IOC */ + int bucketthresh; /* Send more when this many left */ + + int *mpt_txfidx; /* Free Tx Context list */ + int mpt_txfidx_tail; + spinlock_t txfidx_lock; + + int *mpt_rxfidx; /* Free Rx Context list */ + int mpt_rxfidx_tail; + spinlock_t rxfidx_lock; + + struct BufferControl *RcvCtl; /* Receive BufferControl structs */ + struct BufferControl *SendCtl; /* Send BufferControl structs */ + + int max_buckets_out; /* Max buckets to send to IOC */ + int tx_max_out; /* IOC's Tx queue len */ + + u32 total_posted; + u32 total_received; + struct net_device_stats stats; /* Per device statistics */ + + struct work_struct post_buckets_task; + unsigned long post_buckets_active; +}; + +struct mpt_lan_ohdr { + u16 dtype; + u8 daddr[FC_ALEN]; + u16 stype; + u8 saddr[FC_ALEN]; +}; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +/* + * Forward protos... + */ +static int lan_reply (MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, + MPT_FRAME_HDR *reply); +static int mpt_lan_open(struct net_device *dev); +static int mpt_lan_reset(struct net_device *dev); +static int mpt_lan_close(struct net_device *dev); +static void mpt_lan_post_receive_buckets(void *dev_id); +static void mpt_lan_wake_post_buckets_task(struct net_device *dev, + int priority); +static int mpt_lan_receive_post_turbo(struct net_device *dev, u32 tmsg); +static int mpt_lan_receive_post_reply(struct net_device *dev, + LANReceivePostReply_t *pRecvRep); +static int mpt_lan_send_turbo(struct net_device *dev, u32 tmsg); +static int mpt_lan_send_reply(struct net_device *dev, + LANSendReply_t *pSendRep); +static int mpt_lan_ioc_reset(MPT_ADAPTER *ioc, int reset_phase); +static int mpt_lan_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply); +static unsigned short mpt_lan_type_trans(struct sk_buff *skb, + struct net_device *dev); + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Fusion MPT LAN private data + */ +static int LanCtx = -1; + +static u32 max_buckets_out = 127; +static u32 tx_max_out_p = 127 - 16; + +#ifdef QLOGIC_NAA_WORKAROUND +static struct NAA_Hosed *mpt_bad_naa = NULL; +DEFINE_RWLOCK(bad_naa_lock); +#endif + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Fusion MPT LAN external data + */ +extern int mpt_lan_index; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * lan_reply - Handle all data sent from the hardware. + * @ioc: Pointer to MPT_ADAPTER structure + * @mf: Pointer to original MPT request frame (NULL if TurboReply) + * @reply: Pointer to MPT reply frame + * + * Returns 1 indicating original alloc'd request frame ptr + * should be freed, or 0 if it shouldn't. + */ +static int +lan_reply (MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply) +{ + struct net_device *dev = ioc->netdev; + int FreeReqFrame = 0; + + dioprintk((KERN_INFO MYNAM ": %s/%s: Got reply.\n", + IOC_AND_NETDEV_NAMES_s_s(dev))); + +// dioprintk((KERN_INFO MYNAM "@lan_reply: mf = %p, reply = %p\n", +// mf, reply)); + + if (mf == NULL) { + u32 tmsg = CAST_PTR_TO_U32(reply); + + dioprintk((KERN_INFO MYNAM ": %s/%s: @lan_reply, tmsg %08x\n", + IOC_AND_NETDEV_NAMES_s_s(dev), + tmsg)); + + switch (GET_LAN_FORM(tmsg)) { + + // NOTE! (Optimization) First case here is now caught in + // mptbase.c::mpt_interrupt() routine and callcack here + // is now skipped for this case! 20001218 -sralston +#if 0 + case LAN_REPLY_FORM_MESSAGE_CONTEXT: +// dioprintk((KERN_INFO MYNAM "/lan_reply: " +// "MessageContext turbo reply received\n")); + FreeReqFrame = 1; + break; +#endif + + case LAN_REPLY_FORM_SEND_SINGLE: +// dioprintk((MYNAM "/lan_reply: " +// "calling mpt_lan_send_reply (turbo)\n")); + + // Potential BUG here? -sralston + // FreeReqFrame = mpt_lan_send_turbo(dev, tmsg); + // If/when mpt_lan_send_turbo would return 1 here, + // calling routine (mptbase.c|mpt_interrupt) + // would Oops because mf has already been set + // to NULL. So after return from this func, + // mpt_interrupt() will attempt to put (NULL) mf ptr + // item back onto its adapter FreeQ - Oops!:-( + // It's Ok, since mpt_lan_send_turbo() *currently* + // always returns 0, but..., just in case: + + (void) mpt_lan_send_turbo(dev, tmsg); + FreeReqFrame = 0; + + break; + + case LAN_REPLY_FORM_RECEIVE_SINGLE: +// dioprintk((KERN_INFO MYNAM "@lan_reply: " +// "rcv-Turbo = %08x\n", tmsg)); + mpt_lan_receive_post_turbo(dev, tmsg); + break; + + default: + printk (KERN_ERR MYNAM "/lan_reply: Got a turbo reply " + "that I don't know what to do with\n"); + + /* CHECKME! Hmmm... FreeReqFrame is 0 here; is that right? */ + + break; + } + + return FreeReqFrame; + } + +// msg = (u32 *) reply; +// dioprintk((KERN_INFO MYNAM "@lan_reply: msg = %08x %08x %08x %08x\n", +// le32_to_cpu(msg[0]), le32_to_cpu(msg[1]), +// le32_to_cpu(msg[2]), le32_to_cpu(msg[3]))); +// dioprintk((KERN_INFO MYNAM "@lan_reply: Function = %02xh\n", +// reply->u.hdr.Function)); + + switch (reply->u.hdr.Function) { + + case MPI_FUNCTION_LAN_SEND: + { + LANSendReply_t *pSendRep; + + pSendRep = (LANSendReply_t *) reply; + FreeReqFrame = mpt_lan_send_reply(dev, pSendRep); + break; + } + + case MPI_FUNCTION_LAN_RECEIVE: + { + LANReceivePostReply_t *pRecvRep; + + pRecvRep = (LANReceivePostReply_t *) reply; + if (pRecvRep->NumberOfContexts) { + mpt_lan_receive_post_reply(dev, pRecvRep); + if (!(pRecvRep->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)) + FreeReqFrame = 1; + } else + dioprintk((KERN_INFO MYNAM "@lan_reply: zero context " + "ReceivePostReply received.\n")); + break; + } + + case MPI_FUNCTION_LAN_RESET: + /* Just a default reply. Might want to check it to + * make sure that everything went ok. + */ + FreeReqFrame = 1; + break; + + case MPI_FUNCTION_EVENT_NOTIFICATION: + case MPI_FUNCTION_EVENT_ACK: + /* UPDATE! 20010120 -sralston + * _EVENT_NOTIFICATION should NOT come down this path any more. + * Should be routed to mpt_lan_event_process(), but just in case... + */ + FreeReqFrame = 1; + break; + + default: + printk (KERN_ERR MYNAM "/lan_reply: Got a non-turbo " + "reply that I don't know what to do with\n"); + + /* CHECKME! Hmmm... FreeReqFrame is 0 here; is that right? */ + FreeReqFrame = 1; + + break; + } + + return FreeReqFrame; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int +mpt_lan_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) +{ + struct net_device *dev = ioc->netdev; + struct mpt_lan_priv *priv = netdev_priv(dev); + + dlprintk((KERN_INFO MYNAM ": IOC %s_reset routed to LAN driver!\n", + reset_phase==MPT_IOC_SETUP_RESET ? "setup" : ( + reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post"))); + + if (priv->mpt_rxfidx == NULL) + return (1); + + if (reset_phase == MPT_IOC_SETUP_RESET) { + ; + } else if (reset_phase == MPT_IOC_PRE_RESET) { + int i; + unsigned long flags; + + netif_stop_queue(dev); + + dlprintk ((KERN_INFO "mptlan/ioc_reset: called netif_stop_queue for %s.\n", dev->name)); + + atomic_set(&priv->buckets_out, 0); + + /* Reset Rx Free Tail index and re-populate the queue. */ + spin_lock_irqsave(&priv->rxfidx_lock, flags); + priv->mpt_rxfidx_tail = -1; + for (i = 0; i < priv->max_buckets_out; i++) + priv->mpt_rxfidx[++priv->mpt_rxfidx_tail] = i; + spin_unlock_irqrestore(&priv->rxfidx_lock, flags); + } else { + mpt_lan_post_receive_buckets(dev); + netif_wake_queue(dev); + } + + return 1; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int +mpt_lan_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) +{ + dlprintk((KERN_INFO MYNAM ": MPT event routed to LAN driver!\n")); + + switch (le32_to_cpu(pEvReply->Event)) { + case MPI_EVENT_NONE: /* 00 */ + case MPI_EVENT_LOG_DATA: /* 01 */ + case MPI_EVENT_STATE_CHANGE: /* 02 */ + case MPI_EVENT_UNIT_ATTENTION: /* 03 */ + case MPI_EVENT_IOC_BUS_RESET: /* 04 */ + case MPI_EVENT_EXT_BUS_RESET: /* 05 */ + case MPI_EVENT_RESCAN: /* 06 */ + /* Ok, do we need to do anything here? As far as + I can tell, this is when a new device gets added + to the loop. */ + case MPI_EVENT_LINK_STATUS_CHANGE: /* 07 */ + case MPI_EVENT_LOOP_STATE_CHANGE: /* 08 */ + case MPI_EVENT_LOGOUT: /* 09 */ + case MPI_EVENT_EVENT_CHANGE: /* 0A */ + default: + break; + } + + /* + * NOTE: pEvent->AckRequired handling now done in mptbase.c; + * Do NOT do it here now! + */ + + return 1; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int +mpt_lan_open(struct net_device *dev) +{ + struct mpt_lan_priv *priv = netdev_priv(dev); + int i; + + if (mpt_lan_reset(dev) != 0) { + MPT_ADAPTER *mpt_dev = priv->mpt_dev; + + printk (KERN_WARNING MYNAM "/lan_open: lan_reset failed."); + + if (mpt_dev->active) + printk ("The ioc is active. Perhaps it needs to be" + " reset?\n"); + else + printk ("The ioc in inactive, most likely in the " + "process of being reset. Please try again in " + "a moment.\n"); + } + + priv->mpt_txfidx = kmalloc(priv->tx_max_out * sizeof(int), GFP_KERNEL); + if (priv->mpt_txfidx == NULL) + goto out; + priv->mpt_txfidx_tail = -1; + + priv->SendCtl = kmalloc(priv->tx_max_out * sizeof(struct BufferControl), + GFP_KERNEL); + if (priv->SendCtl == NULL) + goto out_mpt_txfidx; + for (i = 0; i < priv->tx_max_out; i++) { + memset(&priv->SendCtl[i], 0, sizeof(struct BufferControl)); + priv->mpt_txfidx[++priv->mpt_txfidx_tail] = i; + } + + dlprintk((KERN_INFO MYNAM "@lo: Finished initializing SendCtl\n")); + + priv->mpt_rxfidx = kmalloc(priv->max_buckets_out * sizeof(int), + GFP_KERNEL); + if (priv->mpt_rxfidx == NULL) + goto out_SendCtl; + priv->mpt_rxfidx_tail = -1; + + priv->RcvCtl = kmalloc(priv->max_buckets_out * + sizeof(struct BufferControl), + GFP_KERNEL); + if (priv->RcvCtl == NULL) + goto out_mpt_rxfidx; + for (i = 0; i < priv->max_buckets_out; i++) { + memset(&priv->RcvCtl[i], 0, sizeof(struct BufferControl)); + priv->mpt_rxfidx[++priv->mpt_rxfidx_tail] = i; + } + +/**/ dlprintk((KERN_INFO MYNAM "/lo: txfidx contains - ")); +/**/ for (i = 0; i < priv->tx_max_out; i++) +/**/ dlprintk((" %xh", priv->mpt_txfidx[i])); +/**/ dlprintk(("\n")); + + dlprintk((KERN_INFO MYNAM "/lo: Finished initializing RcvCtl\n")); + + mpt_lan_post_receive_buckets(dev); + printk(KERN_INFO MYNAM ": %s/%s: interface up & active\n", + IOC_AND_NETDEV_NAMES_s_s(dev)); + + if (mpt_event_register(LanCtx, mpt_lan_event_process) != 0) { + printk (KERN_WARNING MYNAM "/lo: Unable to register for Event" + " Notifications. This is a bad thing! We're not going " + "to go ahead, but I'd be leery of system stability at " + "this point.\n"); + } + + netif_start_queue(dev); + dlprintk((KERN_INFO MYNAM "/lo: Done.\n")); + + return 0; +out_mpt_rxfidx: + kfree(priv->mpt_rxfidx); + priv->mpt_rxfidx = NULL; +out_SendCtl: + kfree(priv->SendCtl); + priv->SendCtl = NULL; +out_mpt_txfidx: + kfree(priv->mpt_txfidx); + priv->mpt_txfidx = NULL; +out: return -ENOMEM; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* Send a LanReset message to the FW. This should result in the FW returning + any buckets it still has. */ +static int +mpt_lan_reset(struct net_device *dev) +{ + MPT_FRAME_HDR *mf; + LANResetRequest_t *pResetReq; + struct mpt_lan_priv *priv = netdev_priv(dev); + + mf = mpt_get_msg_frame(LanCtx, priv->mpt_dev); + + if (mf == NULL) { +/* dlprintk((KERN_ERR MYNAM "/reset: Evil funkiness abounds! " + "Unable to allocate a request frame.\n")); +*/ + return -1; + } + + pResetReq = (LANResetRequest_t *) mf; + + pResetReq->Function = MPI_FUNCTION_LAN_RESET; + pResetReq->ChainOffset = 0; + pResetReq->Reserved = 0; + pResetReq->PortNumber = priv->pnum; + pResetReq->MsgFlags = 0; + pResetReq->Reserved2 = 0; + + mpt_put_msg_frame(LanCtx, priv->mpt_dev, mf); + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int +mpt_lan_close(struct net_device *dev) +{ + struct mpt_lan_priv *priv = netdev_priv(dev); + MPT_ADAPTER *mpt_dev = priv->mpt_dev; + unsigned int timeout; + int i; + + dlprintk((KERN_INFO MYNAM ": mpt_lan_close called\n")); + + mpt_event_deregister(LanCtx); + + dlprintk((KERN_INFO MYNAM ":lan_close: Posted %d buckets " + "since driver was loaded, %d still out\n", + priv->total_posted,atomic_read(&priv->buckets_out))); + + netif_stop_queue(dev); + + mpt_lan_reset(dev); + + timeout = 2 * HZ; + while (atomic_read(&priv->buckets_out) && --timeout) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + } + + for (i = 0; i < priv->max_buckets_out; i++) { + if (priv->RcvCtl[i].skb != NULL) { +/**/ dlprintk((KERN_INFO MYNAM "/lan_close: bucket %05x " +/**/ "is still out\n", i)); + pci_unmap_single(mpt_dev->pcidev, priv->RcvCtl[i].dma, + priv->RcvCtl[i].len, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(priv->RcvCtl[i].skb); + } + } + + kfree (priv->RcvCtl); + kfree (priv->mpt_rxfidx); + + for (i = 0; i < priv->tx_max_out; i++) { + if (priv->SendCtl[i].skb != NULL) { + pci_unmap_single(mpt_dev->pcidev, priv->SendCtl[i].dma, + priv->SendCtl[i].len, + PCI_DMA_TODEVICE); + dev_kfree_skb(priv->SendCtl[i].skb); + } + } + + kfree(priv->SendCtl); + kfree(priv->mpt_txfidx); + + atomic_set(&priv->buckets_out, 0); + + printk(KERN_INFO MYNAM ": %s/%s: interface down & inactive\n", + IOC_AND_NETDEV_NAMES_s_s(dev)); + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static struct net_device_stats * +mpt_lan_get_stats(struct net_device *dev) +{ + struct mpt_lan_priv *priv = netdev_priv(dev); + + return (struct net_device_stats *) &priv->stats; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int +mpt_lan_change_mtu(struct net_device *dev, int new_mtu) +{ + if ((new_mtu < MPT_LAN_MIN_MTU) || (new_mtu > MPT_LAN_MAX_MTU)) + return -EINVAL; + dev->mtu = new_mtu; + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* Tx timeout handler. */ +static void +mpt_lan_tx_timeout(struct net_device *dev) +{ + struct mpt_lan_priv *priv = netdev_priv(dev); + MPT_ADAPTER *mpt_dev = priv->mpt_dev; + + if (mpt_dev->active) { + dlprintk (("mptlan/tx_timeout: calling netif_wake_queue for %s.\n", dev->name)); + netif_wake_queue(dev); + } +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +//static inline int +static int +mpt_lan_send_turbo(struct net_device *dev, u32 tmsg) +{ + struct mpt_lan_priv *priv = netdev_priv(dev); + MPT_ADAPTER *mpt_dev = priv->mpt_dev; + struct sk_buff *sent; + unsigned long flags; + u32 ctx; + + ctx = GET_LAN_BUFFER_CONTEXT(tmsg); + sent = priv->SendCtl[ctx].skb; + + priv->stats.tx_packets++; + priv->stats.tx_bytes += sent->len; + + dioprintk((KERN_INFO MYNAM ": %s/%s: @%s, skb %p sent.\n", + IOC_AND_NETDEV_NAMES_s_s(dev), + __FUNCTION__, sent)); + + priv->SendCtl[ctx].skb = NULL; + pci_unmap_single(mpt_dev->pcidev, priv->SendCtl[ctx].dma, + priv->SendCtl[ctx].len, PCI_DMA_TODEVICE); + dev_kfree_skb_irq(sent); + + spin_lock_irqsave(&priv->txfidx_lock, flags); + priv->mpt_txfidx[++priv->mpt_txfidx_tail] = ctx; + spin_unlock_irqrestore(&priv->txfidx_lock, flags); + + netif_wake_queue(dev); + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int +mpt_lan_send_reply(struct net_device *dev, LANSendReply_t *pSendRep) +{ + struct mpt_lan_priv *priv = netdev_priv(dev); + MPT_ADAPTER *mpt_dev = priv->mpt_dev; + struct sk_buff *sent; + unsigned long flags; + int FreeReqFrame = 0; + u32 *pContext; + u32 ctx; + u8 count; + + count = pSendRep->NumberOfContexts; + + dioprintk((KERN_INFO MYNAM ": send_reply: IOCStatus: %04x\n", + le16_to_cpu(pSendRep->IOCStatus))); + + /* Add check for Loginfo Flag in IOCStatus */ + + switch (le16_to_cpu(pSendRep->IOCStatus) & MPI_IOCSTATUS_MASK) { + case MPI_IOCSTATUS_SUCCESS: + priv->stats.tx_packets += count; + break; + + case MPI_IOCSTATUS_LAN_CANCELED: + case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: + break; + + case MPI_IOCSTATUS_INVALID_SGL: + priv->stats.tx_errors += count; + printk (KERN_ERR MYNAM ": %s/%s: ERROR - Invalid SGL sent to IOC!\n", + IOC_AND_NETDEV_NAMES_s_s(dev)); + goto out; + + default: + priv->stats.tx_errors += count; + break; + } + + pContext = &pSendRep->BufferContext; + + spin_lock_irqsave(&priv->txfidx_lock, flags); + while (count > 0) { + ctx = GET_LAN_BUFFER_CONTEXT(le32_to_cpu(*pContext)); + + sent = priv->SendCtl[ctx].skb; + priv->stats.tx_bytes += sent->len; + + dioprintk((KERN_INFO MYNAM ": %s/%s: @%s, skb %p sent.\n", + IOC_AND_NETDEV_NAMES_s_s(dev), + __FUNCTION__, sent)); + + priv->SendCtl[ctx].skb = NULL; + pci_unmap_single(mpt_dev->pcidev, priv->SendCtl[ctx].dma, + priv->SendCtl[ctx].len, PCI_DMA_TODEVICE); + dev_kfree_skb_irq(sent); + + priv->mpt_txfidx[++priv->mpt_txfidx_tail] = ctx; + + pContext++; + count--; + } + spin_unlock_irqrestore(&priv->txfidx_lock, flags); + +out: + if (!(pSendRep->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)) + FreeReqFrame = 1; + + netif_wake_queue(dev); + return FreeReqFrame; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int +mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev) +{ + struct mpt_lan_priv *priv = netdev_priv(dev); + MPT_ADAPTER *mpt_dev = priv->mpt_dev; + MPT_FRAME_HDR *mf; + LANSendRequest_t *pSendReq; + SGETransaction32_t *pTrans; + SGESimple64_t *pSimple; + dma_addr_t dma; + unsigned long flags; + int ctx; + u16 cur_naa = 0x1000; + + dioprintk((KERN_INFO MYNAM ": %s called, skb_addr = %p\n", + __FUNCTION__, skb)); + + spin_lock_irqsave(&priv->txfidx_lock, flags); + if (priv->mpt_txfidx_tail < 0) { + netif_stop_queue(dev); + spin_unlock_irqrestore(&priv->txfidx_lock, flags); + + printk (KERN_ERR "%s: no tx context available: %u\n", + __FUNCTION__, priv->mpt_txfidx_tail); + return 1; + } + + mf = mpt_get_msg_frame(LanCtx, mpt_dev); + if (mf == NULL) { + netif_stop_queue(dev); + spin_unlock_irqrestore(&priv->txfidx_lock, flags); + + printk (KERN_ERR "%s: Unable to alloc request frame\n", + __FUNCTION__); + return 1; + } + + ctx = priv->mpt_txfidx[priv->mpt_txfidx_tail--]; + spin_unlock_irqrestore(&priv->txfidx_lock, flags); + +// dioprintk((KERN_INFO MYNAM ": %s/%s: Creating new msg frame (send).\n", +// IOC_AND_NETDEV_NAMES_s_s(dev))); + + pSendReq = (LANSendRequest_t *) mf; + + /* Set the mac.raw pointer, since this apparently isn't getting + * done before we get the skb. Pull the data pointer past the mac data. + */ + skb->mac.raw = skb->data; + skb_pull(skb, 12); + + dma = pci_map_single(mpt_dev->pcidev, skb->data, skb->len, + PCI_DMA_TODEVICE); + + priv->SendCtl[ctx].skb = skb; + priv->SendCtl[ctx].dma = dma; + priv->SendCtl[ctx].len = skb->len; + + /* Message Header */ + pSendReq->Reserved = 0; + pSendReq->Function = MPI_FUNCTION_LAN_SEND; + pSendReq->ChainOffset = 0; + pSendReq->Reserved2 = 0; + pSendReq->MsgFlags = 0; + pSendReq->PortNumber = priv->pnum; + + /* Transaction Context Element */ + pTrans = (SGETransaction32_t *) pSendReq->SG_List; + + /* No Flags, 8 bytes of Details, 32bit Context (bloody turbo replies) */ + pTrans->ContextSize = sizeof(u32); + pTrans->DetailsLength = 2 * sizeof(u32); + pTrans->Flags = 0; + pTrans->TransactionContext[0] = cpu_to_le32(ctx); + +// dioprintk((KERN_INFO MYNAM ": %s/%s: BC = %08x, skb = %p, buff = %p\n", +// IOC_AND_NETDEV_NAMES_s_s(dev), +// ctx, skb, skb->data)); + +#ifdef QLOGIC_NAA_WORKAROUND +{ + struct NAA_Hosed *nh; + + /* Munge the NAA for Tx packets to QLogic boards, which don't follow + RFC 2625. The longer I look at this, the more my opinion of Qlogic + drops. */ + read_lock_irq(&bad_naa_lock); + for (nh = mpt_bad_naa; nh != NULL; nh=nh->next) { + if ((nh->ieee[0] == skb->mac.raw[0]) && + (nh->ieee[1] == skb->mac.raw[1]) && + (nh->ieee[2] == skb->mac.raw[2]) && + (nh->ieee[3] == skb->mac.raw[3]) && + (nh->ieee[4] == skb->mac.raw[4]) && + (nh->ieee[5] == skb->mac.raw[5])) { + cur_naa = nh->NAA; + dlprintk ((KERN_INFO "mptlan/sdu_send: using NAA value " + "= %04x.\n", cur_naa)); + break; + } + } + read_unlock_irq(&bad_naa_lock); +} +#endif + + pTrans->TransactionDetails[0] = cpu_to_le32((cur_naa << 16) | + (skb->mac.raw[0] << 8) | + (skb->mac.raw[1] << 0)); + pTrans->TransactionDetails[1] = cpu_to_le32((skb->mac.raw[2] << 24) | + (skb->mac.raw[3] << 16) | + (skb->mac.raw[4] << 8) | + (skb->mac.raw[5] << 0)); + + pSimple = (SGESimple64_t *) &pTrans->TransactionDetails[2]; + + /* If we ever decide to send more than one Simple SGE per LANSend, then + we will need to make sure that LAST_ELEMENT only gets set on the + last one. Otherwise, bad voodoo and evil funkiness will commence. */ + pSimple->FlagsLength = cpu_to_le32( + ((MPI_SGE_FLAGS_LAST_ELEMENT | + MPI_SGE_FLAGS_END_OF_BUFFER | + MPI_SGE_FLAGS_SIMPLE_ELEMENT | + MPI_SGE_FLAGS_SYSTEM_ADDRESS | + MPI_SGE_FLAGS_HOST_TO_IOC | + MPI_SGE_FLAGS_64_BIT_ADDRESSING | + MPI_SGE_FLAGS_END_OF_LIST) << MPI_SGE_FLAGS_SHIFT) | + skb->len); + pSimple->Address.Low = cpu_to_le32((u32) dma); + if (sizeof(dma_addr_t) > sizeof(u32)) + pSimple->Address.High = cpu_to_le32((u32) ((u64) dma >> 32)); + else + pSimple->Address.High = 0; + + mpt_put_msg_frame (LanCtx, mpt_dev, mf); + dev->trans_start = jiffies; + + dioprintk((KERN_INFO MYNAM ": %s/%s: Sending packet. FlagsLength = %08x.\n", + IOC_AND_NETDEV_NAMES_s_s(dev), + le32_to_cpu(pSimple->FlagsLength))); + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static inline void +mpt_lan_wake_post_buckets_task(struct net_device *dev, int priority) +/* + * @priority: 0 = put it on the timer queue, 1 = put it on the immediate queue + */ +{ + struct mpt_lan_priv *priv = dev->priv; + + if (test_and_set_bit(0, &priv->post_buckets_active) == 0) { + if (priority) { + schedule_work(&priv->post_buckets_task); + } else { + schedule_delayed_work(&priv->post_buckets_task, 1); + dioprintk((KERN_INFO MYNAM ": post_buckets queued on " + "timer.\n")); + } + dioprintk((KERN_INFO MYNAM ": %s/%s: Queued post_buckets task.\n", + IOC_AND_NETDEV_NAMES_s_s(dev) )); + } +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static inline int +mpt_lan_receive_skb(struct net_device *dev, struct sk_buff *skb) +{ + struct mpt_lan_priv *priv = dev->priv; + + skb->protocol = mpt_lan_type_trans(skb, dev); + + dioprintk((KERN_INFO MYNAM ": %s/%s: Incoming packet (%d bytes) " + "delivered to upper level.\n", + IOC_AND_NETDEV_NAMES_s_s(dev), skb->len)); + + priv->stats.rx_bytes += skb->len; + priv->stats.rx_packets++; + + skb->dev = dev; + netif_rx(skb); + + dioprintk((MYNAM "/receive_skb: %d buckets remaining\n", + atomic_read(&priv->buckets_out))); + + if (atomic_read(&priv->buckets_out) < priv->bucketthresh) + mpt_lan_wake_post_buckets_task(dev, 1); + + dioprintk((KERN_INFO MYNAM "/receive_post_reply: %d buckets " + "remaining, %d received back since sod\n", + atomic_read(&priv->buckets_out), priv->total_received)); + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +//static inline int +static int +mpt_lan_receive_post_turbo(struct net_device *dev, u32 tmsg) +{ + struct mpt_lan_priv *priv = dev->priv; + MPT_ADAPTER *mpt_dev = priv->mpt_dev; + struct sk_buff *skb, *old_skb; + unsigned long flags; + u32 ctx, len; + + ctx = GET_LAN_BUCKET_CONTEXT(tmsg); + skb = priv->RcvCtl[ctx].skb; + + len = GET_LAN_PACKET_LENGTH(tmsg); + + if (len < MPT_LAN_RX_COPYBREAK) { + old_skb = skb; + + skb = (struct sk_buff *)dev_alloc_skb(len); + if (!skb) { + printk (KERN_ERR MYNAM ": %s/%s: ERROR - Can't allocate skb! (%s@%d)\n", + IOC_AND_NETDEV_NAMES_s_s(dev), + __FILE__, __LINE__); + return -ENOMEM; + } + + pci_dma_sync_single_for_cpu(mpt_dev->pcidev, priv->RcvCtl[ctx].dma, + priv->RcvCtl[ctx].len, PCI_DMA_FROMDEVICE); + + memcpy(skb_put(skb, len), old_skb->data, len); + + pci_dma_sync_single_for_device(mpt_dev->pcidev, priv->RcvCtl[ctx].dma, + priv->RcvCtl[ctx].len, PCI_DMA_FROMDEVICE); + goto out; + } + + skb_put(skb, len); + + priv->RcvCtl[ctx].skb = NULL; + + pci_unmap_single(mpt_dev->pcidev, priv->RcvCtl[ctx].dma, + priv->RcvCtl[ctx].len, PCI_DMA_FROMDEVICE); + +out: + spin_lock_irqsave(&priv->rxfidx_lock, flags); + priv->mpt_rxfidx[++priv->mpt_rxfidx_tail] = ctx; + spin_unlock_irqrestore(&priv->rxfidx_lock, flags); + + atomic_dec(&priv->buckets_out); + priv->total_received++; + + return mpt_lan_receive_skb(dev, skb); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int +mpt_lan_receive_post_free(struct net_device *dev, + LANReceivePostReply_t *pRecvRep) +{ + struct mpt_lan_priv *priv = dev->priv; + MPT_ADAPTER *mpt_dev = priv->mpt_dev; + unsigned long flags; + struct sk_buff *skb; + u32 ctx; + int count; + int i; + + count = pRecvRep->NumberOfContexts; + +/**/ dlprintk((KERN_INFO MYNAM "/receive_post_reply: " + "IOC returned %d buckets, freeing them...\n", count)); + + spin_lock_irqsave(&priv->rxfidx_lock, flags); + for (i = 0; i < count; i++) { + ctx = le32_to_cpu(pRecvRep->BucketContext[i]); + + skb = priv->RcvCtl[ctx].skb; + +// dlprintk((KERN_INFO MYNAM ": %s: dev_name = %s\n", +// IOC_AND_NETDEV_NAMES_s_s(dev))); +// dlprintk((KERN_INFO MYNAM "@rpr[2], priv = %p, buckets_out addr = %p", +// priv, &(priv->buckets_out))); +// dlprintk((KERN_INFO MYNAM "@rpr[2] TC + 3\n")); + + priv->RcvCtl[ctx].skb = NULL; + pci_unmap_single(mpt_dev->pcidev, priv->RcvCtl[ctx].dma, + priv->RcvCtl[ctx].len, PCI_DMA_FROMDEVICE); + dev_kfree_skb_any(skb); + + priv->mpt_rxfidx[++priv->mpt_rxfidx_tail] = ctx; + } + spin_unlock_irqrestore(&priv->rxfidx_lock, flags); + + atomic_sub(count, &priv->buckets_out); + +// for (i = 0; i < priv->max_buckets_out; i++) +// if (priv->RcvCtl[i].skb != NULL) +// dlprintk((KERN_INFO MYNAM "@rpr: bucket %03x " +// "is still out\n", i)); + +/* dlprintk((KERN_INFO MYNAM "/receive_post_reply: freed %d buckets\n", + count)); +*/ +/**/ dlprintk((KERN_INFO MYNAM "@receive_post_reply: %d buckets " +/**/ "remaining, %d received back since sod.\n", +/**/ atomic_read(&priv->buckets_out), priv->total_received)); + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int +mpt_lan_receive_post_reply(struct net_device *dev, + LANReceivePostReply_t *pRecvRep) +{ + struct mpt_lan_priv *priv = dev->priv; + MPT_ADAPTER *mpt_dev = priv->mpt_dev; + struct sk_buff *skb, *old_skb; + unsigned long flags; + u32 len, ctx, offset; + u32 remaining = le32_to_cpu(pRecvRep->BucketsRemaining); + int count; + int i, l; + + dioprintk((KERN_INFO MYNAM ": mpt_lan_receive_post_reply called\n")); + dioprintk((KERN_INFO MYNAM ": receive_post_reply: IOCStatus: %04x\n", + le16_to_cpu(pRecvRep->IOCStatus))); + + if ((le16_to_cpu(pRecvRep->IOCStatus) & MPI_IOCSTATUS_MASK) == + MPI_IOCSTATUS_LAN_CANCELED) + return mpt_lan_receive_post_free(dev, pRecvRep); + + len = le32_to_cpu(pRecvRep->PacketLength); + if (len == 0) { + printk (KERN_ERR MYNAM ": %s/%s: ERROR - Got a non-TURBO " + "ReceivePostReply w/ PacketLength zero!\n", + IOC_AND_NETDEV_NAMES_s_s(dev)); + printk (KERN_ERR MYNAM ": MsgFlags = %02x, IOCStatus = %04x\n", + pRecvRep->MsgFlags, le16_to_cpu(pRecvRep->IOCStatus)); + return -1; + } + + ctx = le32_to_cpu(pRecvRep->BucketContext[0]); + count = pRecvRep->NumberOfContexts; + skb = priv->RcvCtl[ctx].skb; + + offset = le32_to_cpu(pRecvRep->PacketOffset); +// if (offset != 0) { +// printk (KERN_INFO MYNAM ": %s/%s: Got a ReceivePostReply " +// "w/ PacketOffset %u\n", +// IOC_AND_NETDEV_NAMES_s_s(dev), +// offset); +// } + + dioprintk((KERN_INFO MYNAM ": %s/%s: @rpr, offset = %d, len = %d\n", + IOC_AND_NETDEV_NAMES_s_s(dev), + offset, len)); + + if (count > 1) { + int szrem = len; + +// dioprintk((KERN_INFO MYNAM ": %s/%s: Multiple buckets returned " +// "for single packet, concatenating...\n", +// IOC_AND_NETDEV_NAMES_s_s(dev))); + + skb = (struct sk_buff *)dev_alloc_skb(len); + if (!skb) { + printk (KERN_ERR MYNAM ": %s/%s: ERROR - Can't allocate skb! (%s@%d)\n", + IOC_AND_NETDEV_NAMES_s_s(dev), + __FILE__, __LINE__); + return -ENOMEM; + } + + spin_lock_irqsave(&priv->rxfidx_lock, flags); + for (i = 0; i < count; i++) { + + ctx = le32_to_cpu(pRecvRep->BucketContext[i]); + old_skb = priv->RcvCtl[ctx].skb; + + l = priv->RcvCtl[ctx].len; + if (szrem < l) + l = szrem; + +// dioprintk((KERN_INFO MYNAM ": %s/%s: Buckets = %d, len = %u\n", +// IOC_AND_NETDEV_NAMES_s_s(dev), +// i, l)); + + pci_dma_sync_single_for_cpu(mpt_dev->pcidev, + priv->RcvCtl[ctx].dma, + priv->RcvCtl[ctx].len, + PCI_DMA_FROMDEVICE); + memcpy(skb_put(skb, l), old_skb->data, l); + + pci_dma_sync_single_for_device(mpt_dev->pcidev, + priv->RcvCtl[ctx].dma, + priv->RcvCtl[ctx].len, + PCI_DMA_FROMDEVICE); + + priv->mpt_rxfidx[++priv->mpt_rxfidx_tail] = ctx; + szrem -= l; + } + spin_unlock_irqrestore(&priv->rxfidx_lock, flags); + + } else if (len < MPT_LAN_RX_COPYBREAK) { + + old_skb = skb; + + skb = (struct sk_buff *)dev_alloc_skb(len); + if (!skb) { + printk (KERN_ERR MYNAM ": %s/%s: ERROR - Can't allocate skb! (%s@%d)\n", + IOC_AND_NETDEV_NAMES_s_s(dev), + __FILE__, __LINE__); + return -ENOMEM; + } + + pci_dma_sync_single_for_cpu(mpt_dev->pcidev, + priv->RcvCtl[ctx].dma, + priv->RcvCtl[ctx].len, + PCI_DMA_FROMDEVICE); + + memcpy(skb_put(skb, len), old_skb->data, len); + + pci_dma_sync_single_for_device(mpt_dev->pcidev, + priv->RcvCtl[ctx].dma, + priv->RcvCtl[ctx].len, + PCI_DMA_FROMDEVICE); + + spin_lock_irqsave(&priv->rxfidx_lock, flags); + priv->mpt_rxfidx[++priv->mpt_rxfidx_tail] = ctx; + spin_unlock_irqrestore(&priv->rxfidx_lock, flags); + + } else { + spin_lock_irqsave(&priv->rxfidx_lock, flags); + + priv->RcvCtl[ctx].skb = NULL; + + pci_unmap_single(mpt_dev->pcidev, priv->RcvCtl[ctx].dma, + priv->RcvCtl[ctx].len, PCI_DMA_FROMDEVICE); + priv->RcvCtl[ctx].dma = 0; + + priv->mpt_rxfidx[++priv->mpt_rxfidx_tail] = ctx; + spin_unlock_irqrestore(&priv->rxfidx_lock, flags); + + skb_put(skb,len); + } + + atomic_sub(count, &priv->buckets_out); + priv->total_received += count; + + if (priv->mpt_rxfidx_tail >= MPT_LAN_MAX_BUCKETS_OUT) { + printk (KERN_ERR MYNAM ": %s/%s: Yoohoo! mpt_rxfidx_tail = %d, " + "MPT_LAN_MAX_BUCKETS_OUT = %d\n", + IOC_AND_NETDEV_NAMES_s_s(dev), + priv->mpt_rxfidx_tail, + MPT_LAN_MAX_BUCKETS_OUT); + + panic("Damn it Jim! I'm a doctor, not a programmer! " + "Oh, wait a sec, I am a programmer. " + "And, who's Jim?!?!\n" + "Arrgghh! We've done it again!\n"); + } + + if (remaining == 0) + printk (KERN_WARNING MYNAM ": %s/%s: WARNING - IOC out of buckets! " + "(priv->buckets_out = %d)\n", + IOC_AND_NETDEV_NAMES_s_s(dev), + atomic_read(&priv->buckets_out)); + else if (remaining < 10) + printk (KERN_INFO MYNAM ": %s/%s: IOC says %d buckets left. " + "(priv->buckets_out = %d)\n", + IOC_AND_NETDEV_NAMES_s_s(dev), + remaining, atomic_read(&priv->buckets_out)); + + if ((remaining < priv->bucketthresh) && + ((atomic_read(&priv->buckets_out) - remaining) > + MPT_LAN_BUCKETS_REMAIN_MISMATCH_THRESH)) { + + printk (KERN_WARNING MYNAM " Mismatch between driver's " + "buckets_out count and fw's BucketsRemaining " + "count has crossed the threshold, issuing a " + "LanReset to clear the fw's hashtable. You may " + "want to check your /var/log/messages for \"CRC " + "error\" event notifications.\n"); + + mpt_lan_reset(dev); + mpt_lan_wake_post_buckets_task(dev, 0); + } + + return mpt_lan_receive_skb(dev, skb); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* Simple SGE's only at the moment */ + +static void +mpt_lan_post_receive_buckets(void *dev_id) +{ + struct net_device *dev = dev_id; + struct mpt_lan_priv *priv = dev->priv; + MPT_ADAPTER *mpt_dev = priv->mpt_dev; + MPT_FRAME_HDR *mf; + LANReceivePostRequest_t *pRecvReq; + SGETransaction32_t *pTrans; + SGESimple64_t *pSimple; + struct sk_buff *skb; + dma_addr_t dma; + u32 curr, buckets, count, max; + u32 len = (dev->mtu + dev->hard_header_len + 4); + unsigned long flags; + int i; + + curr = atomic_read(&priv->buckets_out); + buckets = (priv->max_buckets_out - curr); + + dioprintk((KERN_INFO MYNAM ": %s/%s: @%s, Start_buckets = %u, buckets_out = %u\n", + IOC_AND_NETDEV_NAMES_s_s(dev), + __FUNCTION__, buckets, curr)); + + max = (mpt_dev->req_sz - MPT_LAN_RECEIVE_POST_REQUEST_SIZE) / + (MPT_LAN_TRANSACTION32_SIZE + sizeof(SGESimple64_t)); + + while (buckets) { + mf = mpt_get_msg_frame(LanCtx, mpt_dev); + if (mf == NULL) { + printk (KERN_ERR "%s: Unable to alloc request frame\n", + __FUNCTION__); + dioprintk((KERN_ERR "%s: %u buckets remaining\n", + __FUNCTION__, buckets)); + goto out; + } + pRecvReq = (LANReceivePostRequest_t *) mf; + + count = buckets; + if (count > max) + count = max; + + pRecvReq->Function = MPI_FUNCTION_LAN_RECEIVE; + pRecvReq->ChainOffset = 0; + pRecvReq->MsgFlags = 0; + pRecvReq->PortNumber = priv->pnum; + + pTrans = (SGETransaction32_t *) pRecvReq->SG_List; + pSimple = NULL; + + for (i = 0; i < count; i++) { + int ctx; + + spin_lock_irqsave(&priv->rxfidx_lock, flags); + if (priv->mpt_rxfidx_tail < 0) { + printk (KERN_ERR "%s: Can't alloc context\n", + __FUNCTION__); + spin_unlock_irqrestore(&priv->rxfidx_lock, + flags); + break; + } + + ctx = priv->mpt_rxfidx[priv->mpt_rxfidx_tail--]; + + skb = priv->RcvCtl[ctx].skb; + if (skb && (priv->RcvCtl[ctx].len != len)) { + pci_unmap_single(mpt_dev->pcidev, + priv->RcvCtl[ctx].dma, + priv->RcvCtl[ctx].len, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(priv->RcvCtl[ctx].skb); + skb = priv->RcvCtl[ctx].skb = NULL; + } + + if (skb == NULL) { + skb = dev_alloc_skb(len); + if (skb == NULL) { + printk (KERN_WARNING + MYNAM "/%s: Can't alloc skb\n", + __FUNCTION__); + priv->mpt_rxfidx[++priv->mpt_rxfidx_tail] = ctx; + spin_unlock_irqrestore(&priv->rxfidx_lock, flags); + break; + } + + dma = pci_map_single(mpt_dev->pcidev, skb->data, + len, PCI_DMA_FROMDEVICE); + + priv->RcvCtl[ctx].skb = skb; + priv->RcvCtl[ctx].dma = dma; + priv->RcvCtl[ctx].len = len; + } + + spin_unlock_irqrestore(&priv->rxfidx_lock, flags); + + pTrans->ContextSize = sizeof(u32); + pTrans->DetailsLength = 0; + pTrans->Flags = 0; + pTrans->TransactionContext[0] = cpu_to_le32(ctx); + + pSimple = (SGESimple64_t *) pTrans->TransactionDetails; + + pSimple->FlagsLength = cpu_to_le32( + ((MPI_SGE_FLAGS_END_OF_BUFFER | + MPI_SGE_FLAGS_SIMPLE_ELEMENT | + MPI_SGE_FLAGS_64_BIT_ADDRESSING) << MPI_SGE_FLAGS_SHIFT) | len); + pSimple->Address.Low = cpu_to_le32((u32) priv->RcvCtl[ctx].dma); + if (sizeof(dma_addr_t) > sizeof(u32)) + pSimple->Address.High = cpu_to_le32((u32) ((u64) priv->RcvCtl[ctx].dma >> 32)); + else + pSimple->Address.High = 0; + + pTrans = (SGETransaction32_t *) (pSimple + 1); + } + + if (pSimple == NULL) { +/**/ printk (KERN_WARNING MYNAM "/%s: No buckets posted\n", +/**/ __FUNCTION__); + mpt_free_msg_frame(mpt_dev, mf); + goto out; + } + + pSimple->FlagsLength |= cpu_to_le32(MPI_SGE_FLAGS_END_OF_LIST << MPI_SGE_FLAGS_SHIFT); + + pRecvReq->BucketCount = cpu_to_le32(i); + +/* printk(KERN_INFO MYNAM ": posting buckets\n "); + * for (i = 0; i < j + 2; i ++) + * printk (" %08x", le32_to_cpu(msg[i])); + * printk ("\n"); + */ + + mpt_put_msg_frame(LanCtx, mpt_dev, mf); + + priv->total_posted += i; + buckets -= i; + atomic_add(i, &priv->buckets_out); + } + +out: + dioprintk((KERN_INFO MYNAM "/%s: End_buckets = %u, priv->buckets_out = %u\n", + __FUNCTION__, buckets, atomic_read(&priv->buckets_out))); + dioprintk((KERN_INFO MYNAM "/%s: Posted %u buckets and received %u back\n", + __FUNCTION__, priv->total_posted, priv->total_received)); + + clear_bit(0, &priv->post_buckets_active); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static struct net_device * +mpt_register_lan_device (MPT_ADAPTER *mpt_dev, int pnum) +{ + struct net_device *dev = alloc_fcdev(sizeof(struct mpt_lan_priv)); + struct mpt_lan_priv *priv = NULL; + u8 HWaddr[FC_ALEN], *a; + + if (!dev) + return NULL; + + dev->mtu = MPT_LAN_MTU; + + priv = netdev_priv(dev); + + priv->mpt_dev = mpt_dev; + priv->pnum = pnum; + + memset(&priv->post_buckets_task, 0, sizeof(struct work_struct)); + INIT_WORK(&priv->post_buckets_task, mpt_lan_post_receive_buckets, dev); + priv->post_buckets_active = 0; + + dlprintk((KERN_INFO MYNAM "@%d: bucketlen = %d\n", + __LINE__, dev->mtu + dev->hard_header_len + 4)); + + atomic_set(&priv->buckets_out, 0); + priv->total_posted = 0; + priv->total_received = 0; + priv->max_buckets_out = max_buckets_out; + if (mpt_dev->pfacts[0].MaxLanBuckets < max_buckets_out) + priv->max_buckets_out = mpt_dev->pfacts[0].MaxLanBuckets; + + dlprintk((KERN_INFO MYNAM "@%d: MaxLanBuckets=%d, max_buckets_out/priv=%d/%d\n", + __LINE__, + mpt_dev->pfacts[0].MaxLanBuckets, + max_buckets_out, + priv->max_buckets_out)); + + priv->bucketthresh = priv->max_buckets_out * 2 / 3; + spin_lock_init(&priv->txfidx_lock); + spin_lock_init(&priv->rxfidx_lock); + + memset(&priv->stats, 0, sizeof(priv->stats)); + + /* Grab pre-fetched LANPage1 stuff. :-) */ + a = (u8 *) &mpt_dev->lan_cnfg_page1.HardwareAddressLow; + + HWaddr[0] = a[5]; + HWaddr[1] = a[4]; + HWaddr[2] = a[3]; + HWaddr[3] = a[2]; + HWaddr[4] = a[1]; + HWaddr[5] = a[0]; + + dev->addr_len = FC_ALEN; + memcpy(dev->dev_addr, HWaddr, FC_ALEN); + memset(dev->broadcast, 0xff, FC_ALEN); + + /* The Tx queue is 127 deep on the 909. + * Give ourselves some breathing room. + */ + priv->tx_max_out = (tx_max_out_p <= MPT_TX_MAX_OUT_LIM) ? + tx_max_out_p : MPT_TX_MAX_OUT_LIM; + + dev->open = mpt_lan_open; + dev->stop = mpt_lan_close; + dev->get_stats = mpt_lan_get_stats; + dev->set_multicast_list = NULL; + dev->change_mtu = mpt_lan_change_mtu; + dev->hard_start_xmit = mpt_lan_sdu_send; + +/* Not in 2.3.42. Need 2.3.45+ */ + dev->tx_timeout = mpt_lan_tx_timeout; + dev->watchdog_timeo = MPT_LAN_TX_TIMEOUT; + + dlprintk((KERN_INFO MYNAM ": Finished registering dev " + "and setting initial values\n")); + + SET_MODULE_OWNER(dev); + + if (register_netdev(dev) != 0) { + free_netdev(dev); + dev = NULL; + } + return dev; +} + +static int +mptlan_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + MPT_ADAPTER *ioc = pci_get_drvdata(pdev); + struct net_device *dev; + int i; + + for (i = 0; i < ioc->facts.NumberOfPorts; i++) { + printk(KERN_INFO MYNAM ": %s: PortNum=%x, " + "ProtocolFlags=%02Xh (%c%c%c%c)\n", + ioc->name, ioc->pfacts[i].PortNumber, + ioc->pfacts[i].ProtocolFlags, + MPT_PROTOCOL_FLAGS_c_c_c_c( + ioc->pfacts[i].ProtocolFlags)); + + if (!(ioc->pfacts[i].ProtocolFlags & + MPI_PORTFACTS_PROTOCOL_LAN)) { + printk(KERN_INFO MYNAM ": %s: Hmmm... LAN protocol " + "seems to be disabled on this adapter port!\n", + ioc->name); + continue; + } + + dev = mpt_register_lan_device(ioc, i); + if (!dev) { + printk(KERN_ERR MYNAM ": %s: Unable to register " + "port%d as a LAN device\n", ioc->name, + ioc->pfacts[i].PortNumber); + continue; + } + + printk(KERN_INFO MYNAM ": %s: Fusion MPT LAN device " + "registered as '%s'\n", ioc->name, dev->name); + printk(KERN_INFO MYNAM ": %s/%s: " + "LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n", + IOC_AND_NETDEV_NAMES_s_s(dev), + dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], + dev->dev_addr[4], dev->dev_addr[5]); + + ioc->netdev = dev; + + return 0; + } + + return -ENODEV; +} + +static void +mptlan_remove(struct pci_dev *pdev) +{ + MPT_ADAPTER *ioc = pci_get_drvdata(pdev); + struct net_device *dev = ioc->netdev; + + if(dev != NULL) { + unregister_netdev(dev); + free_netdev(dev); + } +} + +static struct mpt_pci_driver mptlan_driver = { + .probe = mptlan_probe, + .remove = mptlan_remove, +}; + +static int __init mpt_lan_init (void) +{ + show_mptmod_ver(LANAME, LANVER); + + if ((LanCtx = mpt_register(lan_reply, MPTLAN_DRIVER)) <= 0) { + printk (KERN_ERR MYNAM ": Failed to register with MPT base driver\n"); + return -EBUSY; + } + + /* Set the callback index to be used by driver core for turbo replies */ + mpt_lan_index = LanCtx; + + dlprintk((KERN_INFO MYNAM ": assigned context of %d\n", LanCtx)); + + if (mpt_reset_register(LanCtx, mpt_lan_ioc_reset)) { + printk(KERN_ERR MYNAM ": Eieee! unable to register a reset " + "handler with mptbase! The world is at an end! " + "Everything is fading to black! Goodbye.\n"); + return -EBUSY; + } + + dlprintk((KERN_INFO MYNAM ": Registered for IOC reset notifications\n")); + + if (mpt_device_driver_register(&mptlan_driver, MPTLAN_DRIVER)) + dprintk((KERN_INFO MYNAM ": failed to register dd callbacks\n")); + return 0; +} + +static void __exit mpt_lan_exit(void) +{ + mpt_device_driver_deregister(MPTLAN_DRIVER); + mpt_reset_deregister(LanCtx); + + if (LanCtx >= 0) { + mpt_deregister(LanCtx); + LanCtx = -1; + mpt_lan_index = 0; + } +} + +module_init(mpt_lan_init); +module_exit(mpt_lan_exit); + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static unsigned short +mpt_lan_type_trans(struct sk_buff *skb, struct net_device *dev) +{ + struct mpt_lan_ohdr *fch = (struct mpt_lan_ohdr *)skb->data; + struct fcllc *fcllc; + + skb->mac.raw = skb->data; + skb_pull(skb, sizeof(struct mpt_lan_ohdr)); + + if (fch->dtype == htons(0xffff)) { + u32 *p = (u32 *) fch; + + swab32s(p + 0); + swab32s(p + 1); + swab32s(p + 2); + swab32s(p + 3); + + printk (KERN_WARNING MYNAM ": %s: WARNING - Broadcast swap F/W bug detected!\n", + NETDEV_PTR_TO_IOC_NAME_s(dev)); + printk (KERN_WARNING MYNAM ": Please update sender @ MAC_addr = %02x:%02x:%02x:%02x:%02x:%02x\n", + fch->saddr[0], fch->saddr[1], fch->saddr[2], + fch->saddr[3], fch->saddr[4], fch->saddr[5]); + } + + if (*fch->daddr & 1) { + if (!memcmp(fch->daddr, dev->broadcast, FC_ALEN)) { + skb->pkt_type = PACKET_BROADCAST; + } else { + skb->pkt_type = PACKET_MULTICAST; + } + } else { + if (memcmp(fch->daddr, dev->dev_addr, FC_ALEN)) { + skb->pkt_type = PACKET_OTHERHOST; + } else { + skb->pkt_type = PACKET_HOST; + } + } + + fcllc = (struct fcllc *)skb->data; + +#ifdef QLOGIC_NAA_WORKAROUND +{ + u16 source_naa = fch->stype, found = 0; + + /* Workaround for QLogic not following RFC 2625 in regards to the NAA + value. */ + + if ((source_naa & 0xF000) == 0) + source_naa = swab16(source_naa); + + if (fcllc->ethertype == htons(ETH_P_ARP)) + dlprintk ((KERN_INFO "mptlan/type_trans: got arp req/rep w/ naa of " + "%04x.\n", source_naa)); + + if ((fcllc->ethertype == htons(ETH_P_ARP)) && + ((source_naa >> 12) != MPT_LAN_NAA_RFC2625)){ + struct NAA_Hosed *nh, *prevnh; + int i; + + dlprintk ((KERN_INFO "mptlan/type_trans: ARP Req/Rep from " + "system with non-RFC 2625 NAA value (%04x).\n", + source_naa)); + + write_lock_irq(&bad_naa_lock); + for (prevnh = nh = mpt_bad_naa; nh != NULL; + prevnh=nh, nh=nh->next) { + if ((nh->ieee[0] == fch->saddr[0]) && + (nh->ieee[1] == fch->saddr[1]) && + (nh->ieee[2] == fch->saddr[2]) && + (nh->ieee[3] == fch->saddr[3]) && + (nh->ieee[4] == fch->saddr[4]) && + (nh->ieee[5] == fch->saddr[5])) { + found = 1; + dlprintk ((KERN_INFO "mptlan/type_trans: ARP Re" + "q/Rep w/ bad NAA from system already" + " in DB.\n")); + break; + } + } + + if ((!found) && (nh == NULL)) { + + nh = kmalloc(sizeof(struct NAA_Hosed), GFP_KERNEL); + dlprintk ((KERN_INFO "mptlan/type_trans: ARP Req/Rep w/" + " bad NAA from system not yet in DB.\n")); + + if (nh != NULL) { + nh->next = NULL; + if (!mpt_bad_naa) + mpt_bad_naa = nh; + if (prevnh) + prevnh->next = nh; + + nh->NAA = source_naa; /* Set the S_NAA value. */ + for (i = 0; i < FC_ALEN; i++) + nh->ieee[i] = fch->saddr[i]; + dlprintk ((KERN_INFO "Got ARP from %02x:%02x:%02x:%02x:" + "%02x:%02x with non-compliant S_NAA value.\n", + fch->saddr[0], fch->saddr[1], fch->saddr[2], + fch->saddr[3], fch->saddr[4],fch->saddr[5])); + } else { + printk (KERN_ERR "mptlan/type_trans: Unable to" + " kmalloc a NAA_Hosed struct.\n"); + } + } else if (!found) { + printk (KERN_ERR "mptlan/type_trans: found not" + " set, but nh isn't null. Evil " + "funkiness abounds.\n"); + } + write_unlock_irq(&bad_naa_lock); + } +} +#endif + + /* Strip the SNAP header from ARP packets since we don't + * pass them through to the 802.2/SNAP layers. + */ + if (fcllc->dsap == EXTENDED_SAP && + (fcllc->ethertype == htons(ETH_P_IP) || + fcllc->ethertype == htons(ETH_P_ARP))) { + skb_pull(skb, sizeof(struct fcllc)); + return fcllc->ethertype; + } + + return htons(ETH_P_802_2); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ diff --git a/drivers/message/fusion/mptlan.h b/drivers/message/fusion/mptlan.h new file mode 100644 index 000000000000..057904260ab1 --- /dev/null +++ b/drivers/message/fusion/mptlan.h @@ -0,0 +1,85 @@ +/* mptlan.h */ + +#ifndef LINUX_MPTLAN_H_INCLUDED +#define LINUX_MPTLAN_H_INCLUDED +/*****************************************************************************/ + +#if !defined(__GENKSYMS__) +#include <linux/module.h> +#endif + +#include <linux/netdevice.h> +#include <linux/errno.h> +// #include <linux/etherdevice.h> +#include <linux/fcdevice.h> +// #include <linux/fddidevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/miscdevice.h> +#include <linux/spinlock.h> +#include <linux/version.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +// #include <linux/trdevice.h> + +#include <asm/uaccess.h> +#include <asm/io.h> + + /* Override mptbase.h by pre-defining these! */ + #define MODULEAUTHOR "Noah Romer, Eddie C. Dost" + +#include "mptbase.h" + +/*****************************************************************************/ +#define LANAME "Fusion MPT LAN driver" +#define LANVER MPT_LINUX_VERSION_COMMON + +#ifdef MODULE +MODULE_AUTHOR(MODULEAUTHOR); +MODULE_DESCRIPTION(LANAME); +#endif +/*****************************************************************************/ + +#define MPT_LAN_MAX_BUCKETS_OUT 256 +#define MPT_LAN_BUCKET_THRESH 18 /* 9 buckets in one message */ +#define MPT_LAN_BUCKETS_REMAIN_MISMATCH_THRESH 10 +#define MPT_LAN_RX_COPYBREAK 200 +#define MPT_LAN_TX_TIMEOUT (1*HZ) +#define MPT_TX_MAX_OUT_LIM 127 + +#define MPT_LAN_MIN_MTU 96 /* RFC2625 */ +#define MPT_LAN_MAX_MTU 65280 /* RFC2625 */ +#define MPT_LAN_MTU 13312 /* Max perf range + lower mem + usage than 16128 */ + +#define MPT_LAN_NAA_RFC2625 0x1 +#define MPT_LAN_NAA_QLOGIC 0x2 + +/* MPT LAN Reset and Suspend Resource Flags Defines */ + +#define MPT_LAN_RESOURCE_FLAG_RETURN_POSTED_BUCKETS 0x01 +#define MPT_LAN_RESOURCE_FLAG_RETURN_PEND_TRANSMITS 0x02 + +/*****************************************************************************/ +#ifdef MPT_LAN_IO_DEBUG +#define dioprintk(x) printk x +#else +#define dioprintk(x) +#endif + +#ifdef MPT_LAN_DEBUG +#define dlprintk(x) printk x +#else +#define dlprintk(x) +#endif + +#define NETDEV_TO_LANPRIV_PTR(d) ((struct mpt_lan_priv *)(d)->priv) +#define NETDEV_PTR_TO_IOC_NAME_s(d) (NETDEV_TO_LANPRIV_PTR(d)->mpt_dev->name) +#define IOC_AND_NETDEV_NAMES_s_s(d) NETDEV_PTR_TO_IOC_NAME_s(d), (d)->name + +/*****************************************************************************/ +#endif + diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c new file mode 100644 index 000000000000..c98d6257ec02 --- /dev/null +++ b/drivers/message/fusion/mptscsih.c @@ -0,0 +1,6021 @@ +/* + * linux/drivers/message/fusion/mptscsih.c + * High performance SCSI / Fibre Channel SCSI Host device driver. + * For use with PCI chip/adapter(s): + * LSIFC9xx/LSI409xx Fibre Channel + * running LSI Logic Fusion MPT (Message Passing Technology) firmware. + * + * Credits: + * This driver would not exist if not for Alan Cox's development + * of the linux i2o driver. + * + * A special thanks to Pamela Delaney (LSI Logic) for tons of work + * and countless enhancements while adding support for the 1030 + * chip family. Pam has been instrumental in the development of + * of the 2.xx.xx series fusion drivers, and her contributions are + * far too numerous to hope to list in one place. + * + * A huge debt of gratitude is owed to David S. Miller (DaveM) + * for fixing much of the stupid and broken stuff in the early + * driver while porting to sparc64 platform. THANK YOU! + * + * (see mptbase.c) + * + * Copyright (c) 1999-2004 LSI Logic Corporation + * Original author: Steven J. Ralston + * (mailto:sjralston1@netscape.net) + * (mailto:mpt_linux_developer@lsil.com) + * + * $Id: mptscsih.c,v 1.104 2002/12/03 21:26:34 pdelaney Exp $ + */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + NO WARRANTY + THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + solely responsible for determining the appropriateness of using and + distributing the Program and assumes all risks associated with its + exercise of rights under this Agreement, including but not limited to + the risks and costs of program errors, damage to or loss of data, + programs or equipment, and unavailability or interruption of operations. + + DISCLAIMER OF LIABILITY + NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +#include "linux_compat.h" /* linux-2.6 tweaks */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kdev_t.h> +#include <linux/blkdev.h> +#include <linux/delay.h> /* for mdelay */ +#include <linux/interrupt.h> /* needed for in_interrupt() proto */ +#include <linux/reboot.h> /* notifier code */ +#include <linux/sched.h> +#include <linux/workqueue.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> + +#include "mptbase.h" +#include "mptscsih.h" + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +#define my_NAME "Fusion MPT SCSI Host driver" +#define my_VERSION MPT_LINUX_VERSION_COMMON +#define MYNAM "mptscsih" + +MODULE_AUTHOR(MODULEAUTHOR); +MODULE_DESCRIPTION(my_NAME); +MODULE_LICENSE("GPL"); + +/* Command line args */ +static int mpt_dv = MPTSCSIH_DOMAIN_VALIDATION; +MODULE_PARM(mpt_dv, "i"); +MODULE_PARM_DESC(mpt_dv, " DV Algorithm: enhanced=1, basic=0 (default=MPTSCSIH_DOMAIN_VALIDATION=1)"); + +static int mpt_width = MPTSCSIH_MAX_WIDTH; +MODULE_PARM(mpt_width, "i"); +MODULE_PARM_DESC(mpt_width, " Max Bus Width: wide=1, narrow=0 (default=MPTSCSIH_MAX_WIDTH=1)"); + +static int mpt_factor = MPTSCSIH_MIN_SYNC; +MODULE_PARM(mpt_factor, "h"); +MODULE_PARM_DESC(mpt_factor, " Min Sync Factor (default=MPTSCSIH_MIN_SYNC=0x08)"); + +static int mpt_saf_te = MPTSCSIH_SAF_TE; +MODULE_PARM(mpt_saf_te, "i"); +MODULE_PARM_DESC(mpt_saf_te, " Force enabling SEP Processor: enable=1 (default=MPTSCSIH_SAF_TE=0)"); + +static int mpt_pq_filter = 0; +MODULE_PARM(mpt_pq_filter, "i"); +MODULE_PARM_DESC(mpt_pq_filter, " Enable peripheral qualifier filter: enable=1 (default=0)"); + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +typedef struct _BIG_SENSE_BUF { + u8 data[MPT_SENSE_BUFFER_ALLOC]; +} BIG_SENSE_BUF; + +#define MPT_SCANDV_GOOD (0x00000000) /* must be 0 */ +#define MPT_SCANDV_DID_RESET (0x00000001) +#define MPT_SCANDV_SENSE (0x00000002) +#define MPT_SCANDV_SOME_ERROR (0x00000004) +#define MPT_SCANDV_SELECTION_TIMEOUT (0x00000008) +#define MPT_SCANDV_ISSUE_SENSE (0x00000010) +#define MPT_SCANDV_FALLBACK (0x00000020) + +#define MPT_SCANDV_MAX_RETRIES (10) + +#define MPT_ICFLAG_BUF_CAP 0x01 /* ReadBuffer Read Capacity format */ +#define MPT_ICFLAG_ECHO 0x02 /* ReadBuffer Echo buffer format */ +#define MPT_ICFLAG_PHYS_DISK 0x04 /* Any SCSI IO but do Phys Disk Format */ +#define MPT_ICFLAG_TAGGED_CMD 0x08 /* Do tagged IO */ +#define MPT_ICFLAG_DID_RESET 0x20 /* Bus Reset occurred with this command */ +#define MPT_ICFLAG_RESERVED 0x40 /* Reserved has been issued */ + +typedef struct _internal_cmd { + char *data; /* data pointer */ + dma_addr_t data_dma; /* data dma address */ + int size; /* transfer size */ + u8 cmd; /* SCSI Op Code */ + u8 bus; /* bus number */ + u8 id; /* SCSI ID (virtual) */ + u8 lun; + u8 flags; /* Bit Field - See above */ + u8 physDiskNum; /* Phys disk number, -1 else */ + u8 rsvd2; + u8 rsvd; +} INTERNAL_CMD; + +typedef struct _negoparms { + u8 width; + u8 offset; + u8 factor; + u8 flags; +} NEGOPARMS; + +typedef struct _dv_parameters { + NEGOPARMS max; + NEGOPARMS now; + u8 cmd; + u8 id; + u16 pad1; +} DVPARAMETERS; + + +/* + * Other private/forward protos... + */ +static int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); +static void mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq); +static int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); + +static int mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt, + SCSIIORequest_t *pReq, int req_idx); +static void mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx); +static void copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply); +static int mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd); +static int mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout ); +static u32 SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc); + +static int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout); +static int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout); + +static int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset); +static int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply); + +static void mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *data, int dlen); +static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56); +static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq); +static void mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *requestedPtr, int *configurationPtr, u8 flags); +static void mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id); +static int mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target, int flags); +static int mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus); +static int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); +static void mptscsih_timer_expired(unsigned long data); +static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd); +static int mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum); + +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION +static int mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io); +static void mptscsih_domainValidation(void *hd); +static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id); +static void mptscsih_qas_check(MPT_SCSI_HOST *hd, int id); +static int mptscsih_doDv(MPT_SCSI_HOST *hd, int channel, int target); +static void mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage); +static void mptscsih_fillbuf(char *buffer, int size, int index, int width); +#endif +/* module entry point */ +static int __init mptscsih_init (void); +static void __exit mptscsih_exit (void); + +static int mptscsih_probe (struct pci_dev *, const struct pci_device_id *); +static void mptscsih_remove(struct pci_dev *); +static void mptscsih_shutdown(struct device *); +#ifdef CONFIG_PM +static int mptscsih_suspend(struct pci_dev *pdev, u32 state); +static int mptscsih_resume(struct pci_dev *pdev); +#endif + + +/* + * Private data... + */ + +static int mpt_scsi_hosts = 0; + +static int ScsiDoneCtx = -1; +static int ScsiTaskCtx = -1; +static int ScsiScanDvCtx = -1; /* Used only for bus scan and dv */ + +#define SNS_LEN(scp) sizeof((scp)->sense_buffer) + +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION +/* + * Domain Validation task structure + */ +static DEFINE_SPINLOCK(dvtaskQ_lock); +static int dvtaskQ_active = 0; +static int dvtaskQ_release = 0; +static struct work_struct mptscsih_dvTask; +#endif + +/* + * Wait Queue setup + */ +static DECLARE_WAIT_QUEUE_HEAD (scandv_waitq); +static int scandv_wait_done = 1; + + +/* Driver command line structure + */ +static struct scsi_host_template driver_template; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_add_sge - Place a simple SGE at address pAddr. + * @pAddr: virtual address for SGE + * @flagslength: SGE flags and data transfer length + * @dma_addr: Physical address + * + * This routine places a MPT request frame back on the MPT adapter's + * FreeQ. + */ +static inline void +mptscsih_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr) +{ + if (sizeof(dma_addr_t) == sizeof(u64)) { + SGESimple64_t *pSge = (SGESimple64_t *) pAddr; + u32 tmp = dma_addr & 0xFFFFFFFF; + + pSge->FlagsLength = cpu_to_le32(flagslength); + pSge->Address.Low = cpu_to_le32(tmp); + tmp = (u32) ((u64)dma_addr >> 32); + pSge->Address.High = cpu_to_le32(tmp); + + } else { + SGESimple32_t *pSge = (SGESimple32_t *) pAddr; + pSge->FlagsLength = cpu_to_le32(flagslength); + pSge->Address = cpu_to_le32(dma_addr); + } +} /* mptscsih_add_sge() */ + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_add_chain - Place a chain SGE at address pAddr. + * @pAddr: virtual address for SGE + * @next: nextChainOffset value (u32's) + * @length: length of next SGL segment + * @dma_addr: Physical address + * + * This routine places a MPT request frame back on the MPT adapter's + * FreeQ. + */ +static inline void +mptscsih_add_chain(char *pAddr, u8 next, u16 length, dma_addr_t dma_addr) +{ + if (sizeof(dma_addr_t) == sizeof(u64)) { + SGEChain64_t *pChain = (SGEChain64_t *) pAddr; + u32 tmp = dma_addr & 0xFFFFFFFF; + + pChain->Length = cpu_to_le16(length); + pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size(); + + pChain->NextChainOffset = next; + + pChain->Address.Low = cpu_to_le32(tmp); + tmp = (u32) ((u64)dma_addr >> 32); + pChain->Address.High = cpu_to_le32(tmp); + } else { + SGEChain32_t *pChain = (SGEChain32_t *) pAddr; + pChain->Length = cpu_to_le16(length); + pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size(); + pChain->NextChainOffset = next; + pChain->Address = cpu_to_le32(dma_addr); + } +} /* mptscsih_add_chain() */ + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptscsih_getFreeChainBuffer - Function to get a free chain + * from the MPT_SCSI_HOST FreeChainQ. + * @ioc: Pointer to MPT_ADAPTER structure + * @req_idx: Index of the SCSI IO request frame. (output) + * + * return SUCCESS or FAILED + */ +static inline int +mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex) +{ + MPT_FRAME_HDR *chainBuf; + unsigned long flags; + int rc; + int chain_idx; + + dsgprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer called\n", + ioc->name)); + spin_lock_irqsave(&ioc->FreeQlock, flags); + if (!list_empty(&ioc->FreeChainQ)) { + int offset; + + chainBuf = list_entry(ioc->FreeChainQ.next, MPT_FRAME_HDR, + u.frame.linkage.list); + list_del(&chainBuf->u.frame.linkage.list); + offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer; + chain_idx = offset / ioc->req_sz; + rc = SUCCESS; + dsgprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer (index %d), got buf=%p\n", + ioc->name, *retIndex, chainBuf)); + } else { + rc = FAILED; + chain_idx = MPT_HOST_NO_CHAIN; + dfailprintk((MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n", + ioc->name)); + } + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + + *retIndex = chain_idx; + return rc; +} /* mptscsih_getFreeChainBuffer() */ + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptscsih_AddSGE - Add a SGE (plus chain buffers) to the + * SCSIIORequest_t Message Frame. + * @ioc: Pointer to MPT_ADAPTER structure + * @SCpnt: Pointer to scsi_cmnd structure + * @pReq: Pointer to SCSIIORequest_t structure + * + * Returns ... + */ +static int +mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt, + SCSIIORequest_t *pReq, int req_idx) +{ + char *psge; + char *chainSge; + struct scatterlist *sg; + int frm_sz; + int sges_left, sg_done; + int chain_idx = MPT_HOST_NO_CHAIN; + int sgeOffset; + int numSgeSlots, numSgeThisFrame; + u32 sgflags, sgdir, thisxfer = 0; + int chain_dma_off = 0; + int newIndex; + int ii; + dma_addr_t v2; + u32 RequestNB; + + sgdir = le32_to_cpu(pReq->Control) & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK; + if (sgdir == MPI_SCSIIO_CONTROL_WRITE) { + sgdir = MPT_TRANSFER_HOST_TO_IOC; + } else { + sgdir = MPT_TRANSFER_IOC_TO_HOST; + } + + psge = (char *) &pReq->SGL; + frm_sz = ioc->req_sz; + + /* Map the data portion, if any. + * sges_left = 0 if no data transfer. + */ + if ( (sges_left = SCpnt->use_sg) ) { + sges_left = pci_map_sg(ioc->pcidev, + (struct scatterlist *) SCpnt->request_buffer, + SCpnt->use_sg, + SCpnt->sc_data_direction); + if (sges_left == 0) + return FAILED; + } else if (SCpnt->request_bufflen) { + SCpnt->SCp.dma_handle = pci_map_single(ioc->pcidev, + SCpnt->request_buffer, + SCpnt->request_bufflen, + SCpnt->sc_data_direction); + dsgprintk((MYIOC_s_INFO_FMT "SG: non-SG for %p, len=%d\n", + ioc->name, SCpnt, SCpnt->request_bufflen)); + mptscsih_add_sge((char *) &pReq->SGL, + 0xD1000000|MPT_SGE_FLAGS_ADDRESSING|sgdir|SCpnt->request_bufflen, + SCpnt->SCp.dma_handle); + + return SUCCESS; + } + + /* Handle the SG case. + */ + sg = (struct scatterlist *) SCpnt->request_buffer; + sg_done = 0; + sgeOffset = sizeof(SCSIIORequest_t) - sizeof(SGE_IO_UNION); + chainSge = NULL; + + /* Prior to entering this loop - the following must be set + * current MF: sgeOffset (bytes) + * chainSge (Null if original MF is not a chain buffer) + * sg_done (num SGE done for this MF) + */ + +nextSGEset: + numSgeSlots = ((frm_sz - sgeOffset) / (sizeof(u32) + sizeof(dma_addr_t)) ); + numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots; + + sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | MPT_SGE_FLAGS_ADDRESSING | sgdir; + + /* Get first (num - 1) SG elements + * Skip any SG entries with a length of 0 + * NOTE: at finish, sg and psge pointed to NEXT data/location positions + */ + for (ii=0; ii < (numSgeThisFrame-1); ii++) { + thisxfer = sg_dma_len(sg); + if (thisxfer == 0) { + sg ++; /* Get next SG element from the OS */ + sg_done++; + continue; + } + + v2 = sg_dma_address(sg); + mptscsih_add_sge(psge, sgflags | thisxfer, v2); + + sg++; /* Get next SG element from the OS */ + psge += (sizeof(u32) + sizeof(dma_addr_t)); + sgeOffset += (sizeof(u32) + sizeof(dma_addr_t)); + sg_done++; + } + + if (numSgeThisFrame == sges_left) { + /* Add last element, end of buffer and end of list flags. + */ + sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT | + MPT_SGE_FLAGS_END_OF_BUFFER | + MPT_SGE_FLAGS_END_OF_LIST; + + /* Add last SGE and set termination flags. + * Note: Last SGE may have a length of 0 - which should be ok. + */ + thisxfer = sg_dma_len(sg); + + v2 = sg_dma_address(sg); + mptscsih_add_sge(psge, sgflags | thisxfer, v2); + /* + sg++; + psge += (sizeof(u32) + sizeof(dma_addr_t)); + */ + sgeOffset += (sizeof(u32) + sizeof(dma_addr_t)); + sg_done++; + + if (chainSge) { + /* The current buffer is a chain buffer, + * but there is not another one. + * Update the chain element + * Offset and Length fields. + */ + mptscsih_add_chain((char *)chainSge, 0, sgeOffset, ioc->ChainBufferDMA + chain_dma_off); + } else { + /* The current buffer is the original MF + * and there is no Chain buffer. + */ + pReq->ChainOffset = 0; + RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03; + dsgprintk((MYIOC_s_ERR_FMT + "Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset)); + ioc->RequestNB[req_idx] = RequestNB; + } + } else { + /* At least one chain buffer is needed. + * Complete the first MF + * - last SGE element, set the LastElement bit + * - set ChainOffset (words) for orig MF + * (OR finish previous MF chain buffer) + * - update MFStructPtr ChainIndex + * - Populate chain element + * Also + * Loop until done. + */ + + dsgprintk((MYIOC_s_INFO_FMT "SG: Chain Required! sg done %d\n", + ioc->name, sg_done)); + + /* Set LAST_ELEMENT flag for last non-chain element + * in the buffer. Since psge points at the NEXT + * SGE element, go back one SGE element, update the flags + * and reset the pointer. (Note: sgflags & thisxfer are already + * set properly). + */ + if (sg_done) { + u32 *ptmp = (u32 *) (psge - (sizeof(u32) + sizeof(dma_addr_t))); + sgflags = le32_to_cpu(*ptmp); + sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT; + *ptmp = cpu_to_le32(sgflags); + } + + if (chainSge) { + /* The current buffer is a chain buffer. + * chainSge points to the previous Chain Element. + * Update its chain element Offset and Length (must + * include chain element size) fields. + * Old chain element is now complete. + */ + u8 nextChain = (u8) (sgeOffset >> 2); + sgeOffset += (sizeof(u32) + sizeof(dma_addr_t)); + mptscsih_add_chain((char *)chainSge, nextChain, sgeOffset, ioc->ChainBufferDMA + chain_dma_off); + } else { + /* The original MF buffer requires a chain buffer - + * set the offset. + * Last element in this MF is a chain element. + */ + pReq->ChainOffset = (u8) (sgeOffset >> 2); + RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03; + dsgprintk((MYIOC_s_ERR_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset)); + ioc->RequestNB[req_idx] = RequestNB; + } + + sges_left -= sg_done; + + + /* NOTE: psge points to the beginning of the chain element + * in current buffer. Get a chain buffer. + */ + dsgprintk((MYIOC_s_INFO_FMT + "calling getFreeChainBuffer SCSI cmd=%02x (%p)\n", + ioc->name, pReq->CDB[0], SCpnt)); + if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) + return FAILED; + + /* Update the tracking arrays. + * If chainSge == NULL, update ReqToChain, else ChainToChain + */ + if (chainSge) { + ioc->ChainToChain[chain_idx] = newIndex; + } else { + ioc->ReqToChain[req_idx] = newIndex; + } + chain_idx = newIndex; + chain_dma_off = ioc->req_sz * chain_idx; + + /* Populate the chainSGE for the current buffer. + * - Set chain buffer pointer to psge and fill + * out the Address and Flags fields. + */ + chainSge = (char *) psge; + dsgprintk((KERN_INFO " Current buff @ %p (index 0x%x)", + psge, req_idx)); + + /* Start the SGE for the next buffer + */ + psge = (char *) (ioc->ChainBuffer + chain_dma_off); + sgeOffset = 0; + sg_done = 0; + + dsgprintk((KERN_INFO " Chain buff @ %p (index 0x%x)\n", + psge, chain_idx)); + + /* Start the SGE for the next buffer + */ + + goto nextSGEset; + } + + return SUCCESS; +} /* mptscsih_AddSGE() */ + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptscsih_io_done - Main SCSI IO callback routine registered to + * Fusion MPT (base) driver + * @ioc: Pointer to MPT_ADAPTER structure + * @mf: Pointer to original MPT request frame + * @r: Pointer to MPT reply frame (NULL if TurboReply) + * + * This routine is called from mpt.c::mpt_interrupt() at the completion + * of any SCSI IO request. + * This routine is registered with the Fusion MPT (base) driver at driver + * load/init time via the mpt_register() API call. + * + * Returns 1 indicating alloc'd request frame ptr should be freed. + */ +static int +mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) +{ + struct scsi_cmnd *sc; + MPT_SCSI_HOST *hd; + SCSIIORequest_t *pScsiReq; + SCSIIOReply_t *pScsiReply; + u16 req_idx; + + hd = (MPT_SCSI_HOST *) ioc->sh->hostdata; + + req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); + sc = hd->ScsiLookup[req_idx]; + if (sc == NULL) { + MPIHeader_t *hdr = (MPIHeader_t *)mf; + + /* Remark: writeSDP1 will use the ScsiDoneCtx + * If a SCSI I/O cmd, device disabled by OS and + * completion done. Cannot touch sc struct. Just free mem. + */ + if (hdr->Function == MPI_FUNCTION_SCSI_IO_REQUEST) + printk(MYIOC_s_ERR_FMT "NULL ScsiCmd ptr!\n", + ioc->name); + + mptscsih_freeChainBuffers(ioc, req_idx); + return 1; + } + + dmfprintk((MYIOC_s_INFO_FMT + "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n", + ioc->name, mf, mr, sc, req_idx)); + + sc->result = DID_OK << 16; /* Set default reply as OK */ + pScsiReq = (SCSIIORequest_t *) mf; + pScsiReply = (SCSIIOReply_t *) mr; + + if (pScsiReply == NULL) { + /* special context reply handling */ + ; + } else { + u32 xfer_cnt; + u16 status; + u8 scsi_state, scsi_status; + + status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK; + scsi_state = pScsiReply->SCSIState; + scsi_status = pScsiReply->SCSIStatus; + xfer_cnt = le32_to_cpu(pScsiReply->TransferCount); + sc->resid = sc->request_bufflen - xfer_cnt; + + dreplyprintk((KERN_NOTICE "Reply ha=%d id=%d lun=%d:\n" + "IOCStatus=%04xh SCSIState=%02xh SCSIStatus=%02xh\n" + "resid=%d bufflen=%d xfer_cnt=%d\n", + ioc->id, pScsiReq->TargetID, pScsiReq->LUN[1], + status, scsi_state, scsi_status, sc->resid, + sc->request_bufflen, xfer_cnt)); + + if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) + copy_sense_data(sc, hd, mf, pScsiReply); + + /* + * Look for + dump FCP ResponseInfo[]! + */ + if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID) { + printk(KERN_NOTICE " FCP_ResponseInfo=%08xh\n", + le32_to_cpu(pScsiReply->ResponseInfo)); + } + + switch(status) { + case MPI_IOCSTATUS_BUSY: /* 0x0002 */ + /* CHECKME! + * Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry) + * But not: DID_BUS_BUSY lest one risk + * killing interrupt handler:-( + */ + sc->result = SAM_STAT_BUSY; + break; + + case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ + case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ + sc->result = DID_BAD_TARGET << 16; + break; + + case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ + /* Spoof to SCSI Selection Timeout! */ + sc->result = DID_NO_CONNECT << 16; + + if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF) + hd->sel_timeout[pScsiReq->TargetID]++; + break; + + case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ + case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ + case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ + /* Linux handles an unsolicited DID_RESET better + * than an unsolicited DID_ABORT. + */ + sc->result = DID_RESET << 16; + + /* GEM Workaround. */ + if (ioc->bus_type == SCSI) + mptscsih_no_negotiate(hd, sc->device->id); + break; + + case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ + if ( xfer_cnt >= sc->underflow ) { + /* Sufficient data transfer occurred */ + sc->result = (DID_OK << 16) | scsi_status; + } else if ( xfer_cnt == 0 ) { + /* A CRC Error causes this condition; retry */ + sc->result = (DRIVER_SENSE << 24) | (DID_OK << 16) | + (CHECK_CONDITION << 1); + sc->sense_buffer[0] = 0x70; + sc->sense_buffer[2] = NO_SENSE; + sc->sense_buffer[12] = 0; + sc->sense_buffer[13] = 0; + } else { + sc->result = DID_SOFT_ERROR << 16; + } + dreplyprintk((KERN_NOTICE "RESIDUAL_MISMATCH: result=%x on id=%d\n", sc->result, sc->target)); + break; + + case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ + /* + * Do upfront check for valid SenseData and give it + * precedence! + */ + sc->result = (DID_OK << 16) | scsi_status; + if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) { + /* Have already saved the status and sense data + */ + ; + } else { + if (xfer_cnt < sc->underflow) { + sc->result = DID_SOFT_ERROR << 16; + } + if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) { + /* What to do? + */ + sc->result = DID_SOFT_ERROR << 16; + } + else if (scsi_state & MPI_SCSI_STATE_TERMINATED) { + /* Not real sure here either... */ + sc->result = DID_RESET << 16; + } + } + + dreplyprintk((KERN_NOTICE " sc->underflow={report ERR if < %02xh bytes xfer'd}\n", + sc->underflow)); + dreplyprintk((KERN_NOTICE " ActBytesXferd=%02xh\n", xfer_cnt)); + /* Report Queue Full + */ + if (scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL) + mptscsih_report_queue_full(sc, pScsiReply, pScsiReq); + + break; + + case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ + case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */ + scsi_status = pScsiReply->SCSIStatus; + sc->result = (DID_OK << 16) | scsi_status; + if (scsi_state == 0) { + ; + } else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) { + /* + * If running against circa 200003dd 909 MPT f/w, + * may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL + * (QUEUE_FULL) returned from device! --> get 0x0000?128 + * and with SenseBytes set to 0. + */ + if (pScsiReply->SCSIStatus == MPI_SCSI_STATUS_TASK_SET_FULL) + mptscsih_report_queue_full(sc, pScsiReply, pScsiReq); + + } + else if (scsi_state & + (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS) + ) { + /* + * What to do? + */ + sc->result = DID_SOFT_ERROR << 16; + } + else if (scsi_state & MPI_SCSI_STATE_TERMINATED) { + /* Not real sure here either... */ + sc->result = DID_RESET << 16; + } + else if (scsi_state & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) { + /* Device Inq. data indicates that it supports + * QTags, but rejects QTag messages. + * This command completed OK. + * + * Not real sure here either so do nothing... */ + } + + if (sc->result == MPI_SCSI_STATUS_TASK_SET_FULL) + mptscsih_report_queue_full(sc, pScsiReply, pScsiReq); + + /* Add handling of: + * Reservation Conflict, Busy, + * Command Terminated, CHECK + */ + break; + + case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ + sc->result = DID_SOFT_ERROR << 16; + break; + + case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */ + case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */ + case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */ + case MPI_IOCSTATUS_RESERVED: /* 0x0005 */ + case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ + case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */ + case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */ + case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ + case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ + case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ + default: + /* + * What to do? + */ + sc->result = DID_SOFT_ERROR << 16; + break; + + } /* switch(status) */ + + dreplyprintk((KERN_NOTICE " sc->result is %08xh\n", sc->result)); + } /* end of address reply case */ + + /* Unmap the DMA buffers, if any. */ + if (sc->use_sg) { + pci_unmap_sg(ioc->pcidev, (struct scatterlist *) sc->request_buffer, + sc->use_sg, sc->sc_data_direction); + } else if (sc->request_bufflen) { + pci_unmap_single(ioc->pcidev, sc->SCp.dma_handle, + sc->request_bufflen, sc->sc_data_direction); + } + + hd->ScsiLookup[req_idx] = NULL; + + sc->scsi_done(sc); /* Issue the command callback */ + + /* Free Chain buffers */ + mptscsih_freeChainBuffers(ioc, req_idx); + return 1; +} + + +/* + * mptscsih_flush_running_cmds - For each command found, search + * Scsi_Host instance taskQ and reply to OS. + * Called only if recovering from a FW reload. + * @hd: Pointer to a SCSI HOST structure + * + * Returns: None. + * + * Must be called while new I/Os are being queued. + */ +static void +mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd) +{ + MPT_ADAPTER *ioc = hd->ioc; + struct scsi_cmnd *SCpnt; + MPT_FRAME_HDR *mf; + int ii; + int max = ioc->req_depth; + + dprintk((KERN_INFO MYNAM ": flush_ScsiLookup called\n")); + for (ii= 0; ii < max; ii++) { + if ((SCpnt = hd->ScsiLookup[ii]) != NULL) { + + /* Command found. + */ + + /* Null ScsiLookup index + */ + hd->ScsiLookup[ii] = NULL; + + mf = MPT_INDEX_2_MFPTR(ioc, ii); + dmfprintk(( "flush: ScsiDone (mf=%p,sc=%p)\n", + mf, SCpnt)); + + /* Set status, free OS resources (SG DMA buffers) + * Do OS callback + * Free driver resources (chain, msg buffers) + */ + if (scsi_device_online(SCpnt->device)) { + if (SCpnt->use_sg) { + pci_unmap_sg(ioc->pcidev, + (struct scatterlist *) SCpnt->request_buffer, + SCpnt->use_sg, + SCpnt->sc_data_direction); + } else if (SCpnt->request_bufflen) { + pci_unmap_single(ioc->pcidev, + SCpnt->SCp.dma_handle, + SCpnt->request_bufflen, + SCpnt->sc_data_direction); + } + } + SCpnt->result = DID_RESET << 16; + SCpnt->host_scribble = NULL; + + /* Free Chain buffers */ + mptscsih_freeChainBuffers(ioc, ii); + + /* Free Message frames */ + mpt_free_msg_frame(ioc, mf); + + SCpnt->scsi_done(SCpnt); /* Issue the command callback */ + } + } + + return; +} + +/* + * mptscsih_search_running_cmds - Delete any commands associated + * with the specified target and lun. Function called only + * when a lun is disable by mid-layer. + * Do NOT access the referenced scsi_cmnd structure or + * members. Will cause either a paging or NULL ptr error. + * @hd: Pointer to a SCSI HOST structure + * @target: target id + * @lun: lun + * + * Returns: None. + * + * Called from slave_destroy. + */ +static void +mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun) +{ + SCSIIORequest_t *mf = NULL; + int ii; + int max = hd->ioc->req_depth; + + dsprintk((KERN_INFO MYNAM ": search_running target %d lun %d max %d\n", + target, lun, max)); + + for (ii=0; ii < max; ii++) { + if (hd->ScsiLookup[ii] != NULL) { + + mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(hd->ioc, ii); + + dsprintk(( "search_running: found (sc=%p, mf = %p) target %d, lun %d \n", + hd->ScsiLookup[ii], mf, mf->TargetID, mf->LUN[1])); + + if ((mf->TargetID != ((u8)target)) || (mf->LUN[1] != ((u8) lun))) + continue; + + /* Cleanup + */ + hd->ScsiLookup[ii] = NULL; + mptscsih_freeChainBuffers(hd->ioc, ii); + mpt_free_msg_frame(hd->ioc, (MPT_FRAME_HDR *)mf); + } + } + + return; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Hack! It might be nice to report if a device is returning QUEUE_FULL + * but maybe not each and every time... + */ +static long last_queue_full = 0; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptscsih_report_queue_full - Report QUEUE_FULL status returned + * from a SCSI target device. + * @sc: Pointer to scsi_cmnd structure + * @pScsiReply: Pointer to SCSIIOReply_t + * @pScsiReq: Pointer to original SCSI request + * + * This routine periodically reports QUEUE_FULL status returned from a + * SCSI target device. It reports this to the console via kernel + * printk() API call, not more than once every 10 seconds. + */ +static void +mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq) +{ + long time = jiffies; + + if (time - last_queue_full > 10 * HZ) { + char *ioc_str = "ioc?"; + + if (sc->device && sc->device->host != NULL && sc->device->host->hostdata != NULL) + ioc_str = ((MPT_SCSI_HOST *)sc->device->host->hostdata)->ioc->name; + dprintk((MYIOC_s_WARN_FMT "Device (%d:%d:%d) reported QUEUE_FULL!\n", + ioc_str, 0, sc->device->id, sc->device->lun)); + last_queue_full = time; + } +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static char *info_kbuf = NULL; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptscsih_probe - Installs scsi devices per bus. + * @pdev: Pointer to pci_dev structure + * + * Returns 0 for success, non-zero for failure. + * + */ + +static int +mptscsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct Scsi_Host *sh; + MPT_SCSI_HOST *hd; + MPT_ADAPTER *ioc = pci_get_drvdata(pdev); + unsigned long flags; + int sz, ii; + int numSGE = 0; + int scale; + int ioc_cap; + u8 *mem; + int error=0; + + + /* 20010202 -sralston + * Added sanity check on readiness of the MPT adapter. + */ + if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) { + printk(MYIOC_s_WARN_FMT + "Skipping because it's not operational!\n", + ioc->name); + return -ENODEV; + } + + if (!ioc->active) { + printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", + ioc->name); + return -ENODEV; + } + + /* Sanity check - ensure at least 1 port is INITIATOR capable + */ + ioc_cap = 0; + for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { + if (ioc->pfacts[ii].ProtocolFlags & + MPI_PORTFACTS_PROTOCOL_INITIATOR) + ioc_cap ++; + } + + if (!ioc_cap) { + printk(MYIOC_s_WARN_FMT + "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n", + ioc->name, ioc); + return -ENODEV; + } + + sh = scsi_host_alloc(&driver_template, sizeof(MPT_SCSI_HOST)); + + if (!sh) { + printk(MYIOC_s_WARN_FMT + "Unable to register controller with SCSI subsystem\n", + ioc->name); + return -1; + } + + spin_lock_irqsave(&ioc->FreeQlock, flags); + + /* Attach the SCSI Host to the IOC structure + */ + ioc->sh = sh; + + sh->io_port = 0; + sh->n_io_port = 0; + sh->irq = 0; + + /* set 16 byte cdb's */ + sh->max_cmd_len = 16; + + /* Yikes! This is important! + * Otherwise, by default, linux + * only scans target IDs 0-7! + * pfactsN->MaxDevices unreliable + * (not supported in early + * versions of the FW). + * max_id = 1 + actual max id, + * max_lun = 1 + actual last lun, + * see hosts.h :o( + */ + if (ioc->bus_type == SCSI) { + sh->max_id = MPT_MAX_SCSI_DEVICES; + } else { + /* For FC, increase the queue depth + * from MPT_SCSI_CAN_QUEUE (31) + * to MPT_FC_CAN_QUEUE (63). + */ + sh->can_queue = MPT_FC_CAN_QUEUE; + sh->max_id = + MPT_MAX_FC_DEVICES<256 ? MPT_MAX_FC_DEVICES : 255; + } + + sh->max_lun = MPT_LAST_LUN + 1; + sh->max_channel = 0; + sh->this_id = ioc->pfacts[0].PortSCSIID; + + /* Required entry. + */ + sh->unique_id = ioc->id; + + /* Verify that we won't exceed the maximum + * number of chain buffers + * We can optimize: ZZ = req_sz/sizeof(SGE) + * For 32bit SGE's: + * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ + * + (req_sz - 64)/sizeof(SGE) + * A slightly different algorithm is required for + * 64bit SGEs. + */ + scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32)); + if (sizeof(dma_addr_t) == sizeof(u64)) { + numSGE = (scale - 1) * + (ioc->facts.MaxChainDepth-1) + scale + + (ioc->req_sz - 60) / (sizeof(dma_addr_t) + + sizeof(u32)); + } else { + numSGE = 1 + (scale - 1) * + (ioc->facts.MaxChainDepth-1) + scale + + (ioc->req_sz - 64) / (sizeof(dma_addr_t) + + sizeof(u32)); + } + + if (numSGE < sh->sg_tablesize) { + /* Reset this value */ + dprintk((MYIOC_s_INFO_FMT + "Resetting sg_tablesize to %d from %d\n", + ioc->name, numSGE, sh->sg_tablesize)); + sh->sg_tablesize = numSGE; + } + + /* Set the pci device pointer in Scsi_Host structure. + */ + scsi_set_device(sh, &ioc->pcidev->dev); + + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + + hd = (MPT_SCSI_HOST *) sh->hostdata; + hd->ioc = ioc; + + /* SCSI needs scsi_cmnd lookup table! + * (with size equal to req_depth*PtrSz!) + */ + sz = ioc->req_depth * sizeof(void *); + mem = kmalloc(sz, GFP_ATOMIC); + if (mem == NULL) { + error = -ENOMEM; + goto mptscsih_probe_failed; + } + + memset(mem, 0, sz); + hd->ScsiLookup = (struct scsi_cmnd **) mem; + + dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p, sz=%d\n", + ioc->name, hd->ScsiLookup, sz)); + + /* Allocate memory for the device structures. + * A non-Null pointer at an offset + * indicates a device exists. + * max_id = 1 + maximum id (hosts.h) + */ + sz = sh->max_id * sizeof(void *); + mem = kmalloc(sz, GFP_ATOMIC); + if (mem == NULL) { + error = -ENOMEM; + goto mptscsih_probe_failed; + } + + memset(mem, 0, sz); + hd->Targets = (VirtDevice **) mem; + + dprintk((KERN_INFO + " Targets @ %p, sz=%d\n", hd->Targets, sz)); + + /* Clear the TM flags + */ + hd->tmPending = 0; + hd->tmState = TM_STATE_NONE; + hd->resetPending = 0; + hd->abortSCpnt = NULL; + + /* Clear the pointer used to store + * single-threaded commands, i.e., those + * issued during a bus scan, dv and + * configuration pages. + */ + hd->cmdPtr = NULL; + + /* Initialize this SCSI Hosts' timers + * To use, set the timer expires field + * and add_timer + */ + init_timer(&hd->timer); + hd->timer.data = (unsigned long) hd; + hd->timer.function = mptscsih_timer_expired; + + if (ioc->bus_type == SCSI) { + /* Update with the driver setup + * values. + */ + if (ioc->spi_data.maxBusWidth > mpt_width) + ioc->spi_data.maxBusWidth = mpt_width; + if (ioc->spi_data.minSyncFactor < mpt_factor) + ioc->spi_data.minSyncFactor = mpt_factor; + + if (ioc->spi_data.minSyncFactor == MPT_ASYNC) { + ioc->spi_data.maxSyncOffset = 0; + } + + ioc->spi_data.Saf_Te = mpt_saf_te; + + hd->negoNvram = 0; +#ifndef MPTSCSIH_ENABLE_DOMAIN_VALIDATION + hd->negoNvram = MPT_SCSICFG_USE_NVRAM; +#endif + ioc->spi_data.forceDv = 0; + ioc->spi_data.noQas = 0; + for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { + ioc->spi_data.dvStatus[ii] = + MPT_SCSICFG_NEGOTIATE; + } + + for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) + ioc->spi_data.dvStatus[ii] |= + MPT_SCSICFG_DV_NOT_DONE; + + dinitprintk((MYIOC_s_INFO_FMT + "dv %x width %x factor %x saf_te %x\n", + ioc->name, mpt_dv, + mpt_width, + mpt_factor, + mpt_saf_te)); + } + + mpt_scsi_hosts++; + + error = scsi_add_host (sh, &ioc->pcidev->dev); + if(error) { + dprintk((KERN_ERR MYNAM + "scsi_add_host failed\n")); + goto mptscsih_probe_failed; + } + + scsi_scan_host(sh); + return 0; + +mptscsih_probe_failed: + + mptscsih_remove(pdev); + return error; + +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptscsih_remove - Removed scsi devices + * @pdev: Pointer to pci_dev structure + * + * + */ +static void +mptscsih_remove(struct pci_dev *pdev) +{ + MPT_ADAPTER *ioc = pci_get_drvdata(pdev); + struct Scsi_Host *host = ioc->sh; + MPT_SCSI_HOST *hd; + int count; + unsigned long flags; + + if(!host) + return; + + scsi_remove_host(host); + +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION + /* Check DV thread active */ + count = 10 * HZ; + spin_lock_irqsave(&dvtaskQ_lock, flags); + if (dvtaskQ_active) { + spin_unlock_irqrestore(&dvtaskQ_lock, flags); + while(dvtaskQ_active && --count) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + } + } else { + spin_unlock_irqrestore(&dvtaskQ_lock, flags); + } + if (!count) + printk(KERN_ERR MYNAM ": ERROR - DV thread still active!\n"); +#if defined(MPT_DEBUG_DV) || defined(MPT_DEBUG_DV_TINY) + else + printk(KERN_ERR MYNAM ": DV thread orig %d, count %d\n", 10 * HZ, count); +#endif +#endif + + hd = (MPT_SCSI_HOST *)host->hostdata; + if (hd != NULL) { + int sz1; + + mptscsih_shutdown(&pdev->dev); + + sz1=0; + + if (hd->ScsiLookup != NULL) { + sz1 = hd->ioc->req_depth * sizeof(void *); + kfree(hd->ScsiLookup); + hd->ScsiLookup = NULL; + } + + if (hd->Targets != NULL) { + /* + * Free pointer array. + */ + kfree(hd->Targets); + hd->Targets = NULL; + } + + dprintk((MYIOC_s_INFO_FMT + "Free'd ScsiLookup (%d) memory\n", + hd->ioc->name, sz1)); + + /* NULL the Scsi_Host pointer + */ + hd->ioc->sh = NULL; + } + + scsi_host_put(host); + mpt_scsi_hosts--; + +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptscsih_shutdown - reboot notifier + * + */ +static void +mptscsih_shutdown(struct device * dev) +{ + MPT_ADAPTER *ioc = pci_get_drvdata(to_pci_dev(dev)); + struct Scsi_Host *host = ioc->sh; + MPT_SCSI_HOST *hd; + + if(!host) + return; + + hd = (MPT_SCSI_HOST *)host->hostdata; + + /* Flush the cache of this adapter + */ + if(hd != NULL) + mptscsih_synchronize_cache(hd, 0); + +} + +#ifdef CONFIG_PM +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptscsih_suspend - Fusion MPT scsie driver suspend routine. + * + * + */ +static int +mptscsih_suspend(struct pci_dev *pdev, u32 state) +{ + mptscsih_shutdown(&pdev->dev); + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptscsih_resume - Fusion MPT scsi driver resume routine. + * + * + */ +static int +mptscsih_resume(struct pci_dev *pdev) +{ + MPT_ADAPTER *ioc = pci_get_drvdata(pdev); + struct Scsi_Host *host = ioc->sh; + MPT_SCSI_HOST *hd; + + if(!host) + return 0; + + hd = (MPT_SCSI_HOST *)host->hostdata; + if(!hd) + return 0; + +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION + { + unsigned long lflags; + spin_lock_irqsave(&dvtaskQ_lock, lflags); + if (!dvtaskQ_active) { + dvtaskQ_active = 1; + spin_unlock_irqrestore(&dvtaskQ_lock, lflags); + INIT_WORK(&mptscsih_dvTask, + mptscsih_domainValidation, (void *) hd); + schedule_work(&mptscsih_dvTask); + } else { + spin_unlock_irqrestore(&dvtaskQ_lock, lflags); + } + } +#endif + return 0; +} + +#endif + +static struct mpt_pci_driver mptscsih_driver = { + .probe = mptscsih_probe, + .remove = mptscsih_remove, + .shutdown = mptscsih_shutdown, +#ifdef CONFIG_PM + .suspend = mptscsih_suspend, + .resume = mptscsih_resume, +#endif +}; + +/* SCSI host fops start here... */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_init - Register MPT adapter(s) as SCSI host(s) with + * linux scsi mid-layer. + * + * Returns 0 for success, non-zero for failure. + */ +static int __init +mptscsih_init(void) +{ + + show_mptmod_ver(my_NAME, my_VERSION); + + ScsiDoneCtx = mpt_register(mptscsih_io_done, MPTSCSIH_DRIVER); + ScsiTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSCSIH_DRIVER); + ScsiScanDvCtx = mpt_register(mptscsih_scandv_complete, MPTSCSIH_DRIVER); + + if (mpt_event_register(ScsiDoneCtx, mptscsih_event_process) == 0) { + devtprintk((KERN_INFO MYNAM + ": Registered for IOC event notifications\n")); + } + + if (mpt_reset_register(ScsiDoneCtx, mptscsih_ioc_reset) == 0) { + dprintk((KERN_INFO MYNAM + ": Registered for IOC reset notifications\n")); + } + + if(mpt_device_driver_register(&mptscsih_driver, + MPTSCSIH_DRIVER) != 0 ) { + dprintk((KERN_INFO MYNAM + ": failed to register dd callbacks\n")); + } + + return 0; + +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_exit - Unregisters MPT adapter(s) + * + */ +static void __exit +mptscsih_exit(void) +{ + mpt_device_driver_deregister(MPTSCSIH_DRIVER); + + mpt_reset_deregister(ScsiDoneCtx); + dprintk((KERN_INFO MYNAM + ": Deregistered for IOC reset notifications\n")); + + mpt_event_deregister(ScsiDoneCtx); + dprintk((KERN_INFO MYNAM + ": Deregistered for IOC event notifications\n")); + + mpt_deregister(ScsiScanDvCtx); + mpt_deregister(ScsiTaskCtx); + mpt_deregister(ScsiDoneCtx); + + if (info_kbuf != NULL) + kfree(info_kbuf); + +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_info - Return information about MPT adapter + * @SChost: Pointer to Scsi_Host structure + * + * (linux scsi_host_template.info routine) + * + * Returns pointer to buffer where information was written. + */ +static const char * +mptscsih_info(struct Scsi_Host *SChost) +{ + MPT_SCSI_HOST *h; + int size = 0; + + if (info_kbuf == NULL) + if ((info_kbuf = kmalloc(0x1000 /* 4Kb */, GFP_KERNEL)) == NULL) + return info_kbuf; + + h = (MPT_SCSI_HOST *)SChost->hostdata; + info_kbuf[0] = '\0'; + if (h) { + mpt_print_ioc_summary(h->ioc, info_kbuf, &size, 0, 0); + info_kbuf[size-1] = '\0'; + } + + return info_kbuf; +} + +struct info_str { + char *buffer; + int length; + int offset; + int pos; +}; + +static void copy_mem_info(struct info_str *info, char *data, int len) +{ + if (info->pos + len > info->length) + len = info->length - info->pos; + + if (info->pos + len < info->offset) { + info->pos += len; + return; + } + + if (info->pos < info->offset) { + data += (info->offset - info->pos); + len -= (info->offset - info->pos); + } + + if (len > 0) { + memcpy(info->buffer + info->pos, data, len); + info->pos += len; + } +} + +static int copy_info(struct info_str *info, char *fmt, ...) +{ + va_list args; + char buf[81]; + int len; + + va_start(args, fmt); + len = vsprintf(buf, fmt, args); + va_end(args); + + copy_mem_info(info, buf, len); + return len; +} + +static int mptscsih_host_info(MPT_ADAPTER *ioc, char *pbuf, off_t offset, int len) +{ + struct info_str info; + + info.buffer = pbuf; + info.length = len; + info.offset = offset; + info.pos = 0; + + copy_info(&info, "%s: %s, ", ioc->name, ioc->prod_name); + copy_info(&info, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word); + copy_info(&info, "Ports=%d, ", ioc->facts.NumberOfPorts); + copy_info(&info, "MaxQ=%d\n", ioc->req_depth); + + return ((info.pos > info.offset) ? info.pos - info.offset : 0); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_proc_info - Return information about MPT adapter + * + * (linux scsi_host_template.info routine) + * + * buffer: if write, user data; if read, buffer for user + * length: if write, return length; + * offset: if write, 0; if read, the current offset into the buffer from + * the previous read. + * hostno: scsi host number + * func: if write = 1; if read = 0 + */ +static int +mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, + int length, int func) +{ + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; + MPT_ADAPTER *ioc = hd->ioc; + int size = 0; + + if (func) { + /* + * write is not supported + */ + } else { + if (start) + *start = buffer; + + size = mptscsih_host_info(ioc, buffer, offset, length); + } + + return size; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +#define ADD_INDEX_LOG(req_ent) do { } while(0) + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_qcmd - Primary Fusion MPT SCSI initiator IO start routine. + * @SCpnt: Pointer to scsi_cmnd structure + * @done: Pointer SCSI mid-layer IO completion function + * + * (linux scsi_host_template.queuecommand routine) + * This is the primary SCSI IO start routine. Create a MPI SCSIIORequest + * from a linux scsi_cmnd request and send it to the IOC. + * + * Returns 0. (rtn value discarded by linux scsi mid-layer) + */ +static int +mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) +{ + MPT_SCSI_HOST *hd; + MPT_FRAME_HDR *mf; + SCSIIORequest_t *pScsiReq; + VirtDevice *pTarget; + int target; + int lun; + u32 datalen; + u32 scsictl; + u32 scsidir; + u32 cmd_len; + int my_idx; + int ii; + + hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata; + target = SCpnt->device->id; + lun = SCpnt->device->lun; + SCpnt->scsi_done = done; + + pTarget = hd->Targets[target]; + + dmfprintk((MYIOC_s_INFO_FMT "qcmd: SCpnt=%p, done()=%p\n", + (hd && hd->ioc) ? hd->ioc->name : "ioc?", SCpnt, done)); + + if (hd->resetPending) { + dtmprintk((MYIOC_s_WARN_FMT "qcmd: SCpnt=%p timeout + 60HZ\n", + (hd && hd->ioc) ? hd->ioc->name : "ioc?", SCpnt)); + return SCSI_MLQUEUE_HOST_BUSY; + } + + /* + * Put together a MPT SCSI request... + */ + if ((mf = mpt_get_msg_frame(ScsiDoneCtx, hd->ioc)) == NULL) { + dprintk((MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n", + hd->ioc->name)); + return SCSI_MLQUEUE_HOST_BUSY; + } + + pScsiReq = (SCSIIORequest_t *) mf; + + my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); + + ADD_INDEX_LOG(my_idx); + + /* BUG FIX! 19991030 -sralston + * TUR's being issued with scsictl=0x02000000 (DATA_IN)! + * Seems we may receive a buffer (datalen>0) even when there + * will be no data transfer! GRRRRR... + */ + if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) { + datalen = SCpnt->request_bufflen; + scsidir = MPI_SCSIIO_CONTROL_READ; /* DATA IN (host<--ioc<--dev) */ + } else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) { + datalen = SCpnt->request_bufflen; + scsidir = MPI_SCSIIO_CONTROL_WRITE; /* DATA OUT (host-->ioc-->dev) */ + } else { + datalen = 0; + scsidir = MPI_SCSIIO_CONTROL_NODATATRANSFER; + } + + /* Default to untagged. Once a target structure has been allocated, + * use the Inquiry data to determine if device supports tagged. + */ + if ( pTarget + && (pTarget->tflags & MPT_TARGET_FLAGS_Q_YES) + && (SCpnt->device->tagged_supported)) { + scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ; + } else { + scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED; + } + + /* Use the above information to set up the message frame + */ + pScsiReq->TargetID = (u8) target; + pScsiReq->Bus = (u8) SCpnt->device->channel; + pScsiReq->ChainOffset = 0; + pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST; + pScsiReq->CDBLength = SCpnt->cmd_len; + pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE; + pScsiReq->Reserved = 0; + pScsiReq->MsgFlags = mpt_msg_flags(); + pScsiReq->LUN[0] = 0; + pScsiReq->LUN[1] = lun; + pScsiReq->LUN[2] = 0; + pScsiReq->LUN[3] = 0; + pScsiReq->LUN[4] = 0; + pScsiReq->LUN[5] = 0; + pScsiReq->LUN[6] = 0; + pScsiReq->LUN[7] = 0; + pScsiReq->Control = cpu_to_le32(scsictl); + + /* + * Write SCSI CDB into the message + */ + cmd_len = SCpnt->cmd_len; + for (ii=0; ii < cmd_len; ii++) + pScsiReq->CDB[ii] = SCpnt->cmnd[ii]; + + for (ii=cmd_len; ii < 16; ii++) + pScsiReq->CDB[ii] = 0; + + /* DataLength */ + pScsiReq->DataLength = cpu_to_le32(datalen); + + /* SenseBuffer low address */ + pScsiReq->SenseBufferLowAddr = cpu_to_le32(hd->ioc->sense_buf_low_dma + + (my_idx * MPT_SENSE_BUFFER_ALLOC)); + + /* Now add the SG list + * Always have a SGE even if null length. + */ + if (datalen == 0) { + /* Add a NULL SGE */ + mptscsih_add_sge((char *)&pScsiReq->SGL, MPT_SGE_FLAGS_SSIMPLE_READ | 0, + (dma_addr_t) -1); + } else { + /* Add a 32 or 64 bit SGE */ + if (mptscsih_AddSGE(hd->ioc, SCpnt, pScsiReq, my_idx) != SUCCESS) + goto fail; + } + + hd->ScsiLookup[my_idx] = SCpnt; + SCpnt->host_scribble = NULL; + +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION + if (hd->ioc->bus_type == SCSI) { + int dvStatus = hd->ioc->spi_data.dvStatus[target]; + int issueCmd = 1; + + if (dvStatus || hd->ioc->spi_data.forceDv) { + + if ((dvStatus & MPT_SCSICFG_NEED_DV) || + (hd->ioc->spi_data.forceDv & MPT_SCSICFG_NEED_DV)) { + unsigned long lflags; + /* Schedule DV if necessary */ + spin_lock_irqsave(&dvtaskQ_lock, lflags); + if (!dvtaskQ_active) { + dvtaskQ_active = 1; + spin_unlock_irqrestore(&dvtaskQ_lock, lflags); + INIT_WORK(&mptscsih_dvTask, mptscsih_domainValidation, (void *) hd); + + schedule_work(&mptscsih_dvTask); + } else { + spin_unlock_irqrestore(&dvtaskQ_lock, lflags); + } + hd->ioc->spi_data.forceDv &= ~MPT_SCSICFG_NEED_DV; + } + + /* Trying to do DV to this target, extend timeout. + * Wait to issue until flag is clear + */ + if (dvStatus & MPT_SCSICFG_DV_PENDING) { + mod_timer(&SCpnt->eh_timeout, jiffies + 40 * HZ); + issueCmd = 0; + } + + /* Set the DV flags. + */ + if (dvStatus & MPT_SCSICFG_DV_NOT_DONE) + mptscsih_set_dvflags(hd, pScsiReq); + + if (!issueCmd) + goto fail; + } + } +#endif + + mpt_put_msg_frame(ScsiDoneCtx, hd->ioc, mf); + dmfprintk((MYIOC_s_INFO_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n", + hd->ioc->name, SCpnt, mf, my_idx)); + DBG_DUMP_REQUEST_FRAME(mf) + return 0; + + fail: + mptscsih_freeChainBuffers(hd->ioc, my_idx); + mpt_free_msg_frame(hd->ioc, mf); + return SCSI_MLQUEUE_HOST_BUSY; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptscsih_freeChainBuffers - Function to free chain buffers associated + * with a SCSI IO request + * @hd: Pointer to the MPT_SCSI_HOST instance + * @req_idx: Index of the SCSI IO request frame. + * + * Called if SG chain buffer allocation fails and mptscsih callbacks. + * No return. + */ +static void +mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx) +{ + MPT_FRAME_HDR *chain; + unsigned long flags; + int chain_idx; + int next; + + /* Get the first chain index and reset + * tracker state. + */ + chain_idx = ioc->ReqToChain[req_idx]; + ioc->ReqToChain[req_idx] = MPT_HOST_NO_CHAIN; + + while (chain_idx != MPT_HOST_NO_CHAIN) { + + /* Save the next chain buffer index */ + next = ioc->ChainToChain[chain_idx]; + + /* Free this chain buffer and reset + * tracker + */ + ioc->ChainToChain[chain_idx] = MPT_HOST_NO_CHAIN; + + chain = (MPT_FRAME_HDR *) (ioc->ChainBuffer + + (chain_idx * ioc->req_sz)); + + spin_lock_irqsave(&ioc->FreeQlock, flags); + list_add_tail(&chain->u.frame.linkage.list, &ioc->FreeChainQ); + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + + dmfprintk((MYIOC_s_INFO_FMT "FreeChainBuffers (index %d)\n", + ioc->name, chain_idx)); + + /* handle next */ + chain_idx = next; + } + return; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Reset Handling + */ + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptscsih_TMHandler - Generic handler for SCSI Task Management. + * Fall through to mpt_HardResetHandler if: not operational, too many + * failed TM requests or handshake failure. + * + * @ioc: Pointer to MPT_ADAPTER structure + * @type: Task Management type + * @target: Logical Target ID for reset (if appropriate) + * @lun: Logical Unit for reset (if appropriate) + * @ctx2abort: Context for the task to be aborted (if appropriate) + * + * Remark: Currently invoked from a non-interrupt thread (_bh). + * + * Remark: With old EH code, at most 1 SCSI TaskMgmt function per IOC + * will be active. + * + * Returns 0 for SUCCESS or -1 if FAILED. + */ +static int +mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout) +{ + MPT_ADAPTER *ioc; + int rc = -1; + int doTask = 1; + u32 ioc_raw_state; + unsigned long flags; + + /* If FW is being reloaded currently, return success to + * the calling function. + */ + if (hd == NULL) + return 0; + + ioc = hd->ioc; + if (ioc == NULL) { + printk(KERN_ERR MYNAM " TMHandler" " NULL ioc!\n"); + return FAILED; + } + dtmprintk((MYIOC_s_INFO_FMT "TMHandler Entered!\n", ioc->name)); + + // SJR - CHECKME - Can we avoid this here? + // (mpt_HardResetHandler has this check...) + spin_lock_irqsave(&ioc->diagLock, flags); + if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)) { + spin_unlock_irqrestore(&ioc->diagLock, flags); + return FAILED; + } + spin_unlock_irqrestore(&ioc->diagLock, flags); + + /* Wait a fixed amount of time for the TM pending flag to be cleared. + * If we time out and not bus reset, then we return a FAILED status to the caller. + * The call to mptscsih_tm_pending_wait() will set the pending flag if we are + * successful. Otherwise, reload the FW. + */ + if (mptscsih_tm_pending_wait(hd) == FAILED) { + if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) { + dtmprintk((KERN_WARNING MYNAM ": %s: TMHandler abort: " + "Timed out waiting for last TM (%d) to complete! \n", + hd->ioc->name, hd->tmPending)); + return FAILED; + } else if (type == MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) { + dtmprintk((KERN_WARNING MYNAM ": %s: TMHandler target reset: " + "Timed out waiting for last TM (%d) to complete! \n", + hd->ioc->name, hd->tmPending)); + return FAILED; + } else if (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) { + dtmprintk((KERN_WARNING MYNAM ": %s: TMHandler bus reset: " + "Timed out waiting for last TM (%d) to complete! \n", + hd->ioc->name, hd->tmPending)); + if (hd->tmPending & (1 << MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS)) + return FAILED; + + doTask = 0; + } + } else { + spin_lock_irqsave(&hd->ioc->FreeQlock, flags); + hd->tmPending |= (1 << type); + spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags); + } + + /* Is operational? + */ + ioc_raw_state = mpt_GetIocState(hd->ioc, 0); + +#ifdef MPT_DEBUG_RESET + if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) { + printk(MYIOC_s_WARN_FMT + "TM Handler: IOC Not operational(0x%x)!\n", + hd->ioc->name, ioc_raw_state); + } +#endif + + if (doTask && ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) + && !(ioc_raw_state & MPI_DOORBELL_ACTIVE)) { + + /* Isse the Task Mgmt request. + */ + if (hd->hard_resets < -1) + hd->hard_resets++; + rc = mptscsih_IssueTaskMgmt(hd, type, channel, target, lun, ctx2abort, timeout); + if (rc) { + printk(MYIOC_s_INFO_FMT "Issue of TaskMgmt failed!\n", hd->ioc->name); + } else { + dtmprintk((MYIOC_s_INFO_FMT "Issue of TaskMgmt Successful!\n", hd->ioc->name)); + } + } + + /* Only fall through to the HRH if this is a bus reset + */ + if ((type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) && (rc || + ioc->reload_fw || (ioc->alt_ioc && ioc->alt_ioc->reload_fw))) { + dtmprintk((MYIOC_s_INFO_FMT "Calling HardReset! \n", + hd->ioc->name)); + rc = mpt_HardResetHandler(hd->ioc, CAN_SLEEP); + } + + dtmprintk((MYIOC_s_INFO_FMT "TMHandler rc = %d!\n", hd->ioc->name, rc)); + + return rc; +} + + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptscsih_IssueTaskMgmt - Generic send Task Management function. + * @hd: Pointer to MPT_SCSI_HOST structure + * @type: Task Management type + * @target: Logical Target ID for reset (if appropriate) + * @lun: Logical Unit for reset (if appropriate) + * @ctx2abort: Context for the task to be aborted (if appropriate) + * + * Remark: _HardResetHandler can be invoked from an interrupt thread (timer) + * or a non-interrupt thread. In the former, must not call schedule(). + * + * Not all fields are meaningfull for all task types. + * + * Returns 0 for SUCCESS, -999 for "no msg frames", + * else other non-zero value returned. + */ +static int +mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout) +{ + MPT_FRAME_HDR *mf; + SCSITaskMgmt_t *pScsiTm; + int ii; + int retval; + + /* Return Fail to calling function if no message frames available. + */ + if ((mf = mpt_get_msg_frame(ScsiTaskCtx, hd->ioc)) == NULL) { + dfailprintk((MYIOC_s_ERR_FMT "IssueTaskMgmt, no msg frames!!\n", + hd->ioc->name)); + //return FAILED; + return -999; + } + dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt request @ %p\n", + hd->ioc->name, mf)); + + /* Format the Request + */ + pScsiTm = (SCSITaskMgmt_t *) mf; + pScsiTm->TargetID = target; + pScsiTm->Bus = channel; + pScsiTm->ChainOffset = 0; + pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT; + + pScsiTm->Reserved = 0; + pScsiTm->TaskType = type; + pScsiTm->Reserved1 = 0; + pScsiTm->MsgFlags = (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) + ? MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION : 0; + + for (ii= 0; ii < 8; ii++) { + pScsiTm->LUN[ii] = 0; + } + pScsiTm->LUN[1] = lun; + + for (ii=0; ii < 7; ii++) + pScsiTm->Reserved2[ii] = 0; + + pScsiTm->TaskMsgContext = ctx2abort; + + dtmprintk((MYIOC_s_INFO_FMT + "IssueTaskMgmt: ctx2abort (0x%08x) type=%d\n", + hd->ioc->name, ctx2abort, type)); + + DBG_DUMP_TM_REQUEST_FRAME((u32 *)pScsiTm); + + if ((retval = mpt_send_handshake_request(ScsiTaskCtx, hd->ioc, + sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, + CAN_SLEEP)) != 0) { + dfailprintk((MYIOC_s_ERR_FMT "_send_handshake FAILED!" + " (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd, + hd->ioc, mf)); + mpt_free_msg_frame(hd->ioc, mf); + return retval; + } + + if(mptscsih_tm_wait_for_completion(hd, timeout) == FAILED) { + dfailprintk((MYIOC_s_ERR_FMT "_wait_for_completion FAILED!" + " (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd, + hd->ioc, mf)); + mpt_free_msg_frame(hd->ioc, mf); + dtmprintk((MYIOC_s_INFO_FMT "Calling HardReset! \n", + hd->ioc->name)); + retval = mpt_HardResetHandler(hd->ioc, CAN_SLEEP); + } + + return retval; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant + * @SCpnt: Pointer to scsi_cmnd structure, IO to be aborted + * + * (linux scsi_host_template.eh_abort_handler routine) + * + * Returns SUCCESS or FAILED. + */ +static int +mptscsih_abort(struct scsi_cmnd * SCpnt) +{ + MPT_SCSI_HOST *hd; + MPT_ADAPTER *ioc; + MPT_FRAME_HDR *mf; + u32 ctx2abort; + int scpnt_idx; + spinlock_t *host_lock = SCpnt->device->host->host_lock; + + /* If we can't locate our host adapter structure, return FAILED status. + */ + if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL) { + SCpnt->result = DID_RESET << 16; + SCpnt->scsi_done(SCpnt); + dfailprintk((KERN_WARNING MYNAM ": mptscsih_abort: " + "Can't locate host! (sc=%p)\n", + SCpnt)); + return FAILED; + } + + ioc = hd->ioc; + if (hd->resetPending) + return FAILED; + + printk(KERN_WARNING MYNAM ": %s: >> Attempting task abort! (sc=%p)\n", + hd->ioc->name, SCpnt); + + if (hd->timeouts < -1) + hd->timeouts++; + + /* Find this command + */ + if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(SCpnt)) < 0) { + /* Cmd not found in ScsiLookup. + * Do OS callback. + */ + SCpnt->result = DID_RESET << 16; + dtmprintk((KERN_WARNING MYNAM ": %s: mptscsih_abort: " + "Command not in the active list! (sc=%p)\n", + hd->ioc->name, SCpnt)); + return SUCCESS; + } + + /* Most important! Set TaskMsgContext to SCpnt's MsgContext! + * (the IO to be ABORT'd) + * + * NOTE: Since we do not byteswap MsgContext, we do not + * swap it here either. It is an opaque cookie to + * the controller, so it does not matter. -DaveM + */ + mf = MPT_INDEX_2_MFPTR(hd->ioc, scpnt_idx); + ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext; + + hd->abortSCpnt = SCpnt; + + spin_unlock_irq(host_lock); + if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK, + SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun, + ctx2abort, 2 /* 2 second timeout */) + < 0) { + + /* The TM request failed and the subsequent FW-reload failed! + * Fatal error case. + */ + printk(MYIOC_s_WARN_FMT "Error issuing abort task! (sc=%p)\n", + hd->ioc->name, SCpnt); + + /* We must clear our pending flag before clearing our state. + */ + hd->tmPending = 0; + hd->tmState = TM_STATE_NONE; + + spin_lock_irq(host_lock); + + /* Unmap the DMA buffers, if any. */ + if (SCpnt->use_sg) { + pci_unmap_sg(ioc->pcidev, (struct scatterlist *) SCpnt->request_buffer, + SCpnt->use_sg, SCpnt->sc_data_direction); + } else if (SCpnt->request_bufflen) { + pci_unmap_single(ioc->pcidev, SCpnt->SCp.dma_handle, + SCpnt->request_bufflen, SCpnt->sc_data_direction); + } + hd->ScsiLookup[scpnt_idx] = NULL; + SCpnt->result = DID_RESET << 16; + SCpnt->scsi_done(SCpnt); /* Issue the command callback */ + mptscsih_freeChainBuffers(ioc, scpnt_idx); + mpt_free_msg_frame(ioc, mf); + return FAILED; + } + spin_lock_irq(host_lock); + return SUCCESS; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_dev_reset - Perform a SCSI TARGET_RESET! new_eh variant + * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to + * + * (linux scsi_host_template.eh_dev_reset_handler routine) + * + * Returns SUCCESS or FAILED. + */ +static int +mptscsih_dev_reset(struct scsi_cmnd * SCpnt) +{ + MPT_SCSI_HOST *hd; + spinlock_t *host_lock = SCpnt->device->host->host_lock; + + /* If we can't locate our host adapter structure, return FAILED status. + */ + if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){ + dtmprintk((KERN_WARNING MYNAM ": mptscsih_dev_reset: " + "Can't locate host! (sc=%p)\n", + SCpnt)); + return FAILED; + } + + if (hd->resetPending) + return FAILED; + + printk(KERN_WARNING MYNAM ": %s: >> Attempting target reset! (sc=%p)\n", + hd->ioc->name, SCpnt); + + spin_unlock_irq(host_lock); + if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, + SCpnt->device->channel, SCpnt->device->id, + 0, 0, 5 /* 5 second timeout */) + < 0){ + /* The TM request failed and the subsequent FW-reload failed! + * Fatal error case. + */ + printk(MYIOC_s_WARN_FMT "Error processing TaskMgmt request (sc=%p)\n", + hd->ioc->name, SCpnt); + hd->tmPending = 0; + hd->tmState = TM_STATE_NONE; + spin_lock_irq(host_lock); + return FAILED; + } + spin_lock_irq(host_lock); + return SUCCESS; + +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_bus_reset - Perform a SCSI BUS_RESET! new_eh variant + * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to + * + * (linux scsi_host_template.eh_bus_reset_handler routine) + * + * Returns SUCCESS or FAILED. + */ +static int +mptscsih_bus_reset(struct scsi_cmnd * SCpnt) +{ + MPT_SCSI_HOST *hd; + spinlock_t *host_lock = SCpnt->device->host->host_lock; + + /* If we can't locate our host adapter structure, return FAILED status. + */ + if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){ + dtmprintk((KERN_WARNING MYNAM ": mptscsih_bus_reset: " + "Can't locate host! (sc=%p)\n", + SCpnt ) ); + return FAILED; + } + + printk(KERN_WARNING MYNAM ": %s: >> Attempting bus reset! (sc=%p)\n", + hd->ioc->name, SCpnt); + + if (hd->timeouts < -1) + hd->timeouts++; + + /* We are now ready to execute the task management request. */ + spin_unlock_irq(host_lock); + if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, + SCpnt->device->channel, 0, 0, 0, 5 /* 5 second timeout */) + < 0){ + + /* The TM request failed and the subsequent FW-reload failed! + * Fatal error case. + */ + printk(MYIOC_s_WARN_FMT + "Error processing TaskMgmt request (sc=%p)\n", + hd->ioc->name, SCpnt); + hd->tmPending = 0; + hd->tmState = TM_STATE_NONE; + spin_lock_irq(host_lock); + return FAILED; + } + spin_lock_irq(host_lock); + return SUCCESS; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_host_reset - Perform a SCSI host adapter RESET! + * new_eh variant + * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to + * + * (linux scsi_host_template.eh_host_reset_handler routine) + * + * Returns SUCCESS or FAILED. + */ +static int +mptscsih_host_reset(struct scsi_cmnd *SCpnt) +{ + MPT_SCSI_HOST * hd; + int status = SUCCESS; + spinlock_t *host_lock = SCpnt->device->host->host_lock; + + /* If we can't locate the host to reset, then we failed. */ + if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){ + dtmprintk( ( KERN_WARNING MYNAM ": mptscsih_host_reset: " + "Can't locate host! (sc=%p)\n", + SCpnt ) ); + return FAILED; + } + + printk(KERN_WARNING MYNAM ": %s: >> Attempting host reset! (sc=%p)\n", + hd->ioc->name, SCpnt); + + /* If our attempts to reset the host failed, then return a failed + * status. The host will be taken off line by the SCSI mid-layer. + */ + spin_unlock_irq(host_lock); + if (mpt_HardResetHandler(hd->ioc, CAN_SLEEP) < 0){ + status = FAILED; + } else { + /* Make sure TM pending is cleared and TM state is set to + * NONE. + */ + hd->tmPending = 0; + hd->tmState = TM_STATE_NONE; + } + spin_lock_irq(host_lock); + + + dtmprintk( ( KERN_WARNING MYNAM ": mptscsih_host_reset: " + "Status = %s\n", + (status == SUCCESS) ? "SUCCESS" : "FAILED" ) ); + + return status; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_tm_pending_wait - wait for pending task management request to + * complete. + * @hd: Pointer to MPT host structure. + * + * Returns {SUCCESS,FAILED}. + */ +static int +mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd) +{ + unsigned long flags; + int loop_count = 4 * 10; /* Wait 10 seconds */ + int status = FAILED; + + do { + spin_lock_irqsave(&hd->ioc->FreeQlock, flags); + if (hd->tmState == TM_STATE_NONE) { + hd->tmState = TM_STATE_IN_PROGRESS; + hd->tmPending = 1; + status = SUCCESS; + spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags); + break; + } + spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags); + msleep(250); + } while (--loop_count); + + return status; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_tm_wait_for_completion - wait for completion of TM task + * @hd: Pointer to MPT host structure. + * + * Returns {SUCCESS,FAILED}. + */ +static int +mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout ) +{ + unsigned long flags; + int loop_count = 4 * timeout; + int status = FAILED; + + do { + spin_lock_irqsave(&hd->ioc->FreeQlock, flags); + if(hd->tmPending == 0) { + status = SUCCESS; + spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags); + break; + } + spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags); + msleep_interruptible(250); + } while (--loop_count); + + return status; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver + * @ioc: Pointer to MPT_ADAPTER structure + * @mf: Pointer to SCSI task mgmt request frame + * @mr: Pointer to SCSI task mgmt reply frame + * + * This routine is called from mptbase.c::mpt_interrupt() at the completion + * of any SCSI task management request. + * This routine is registered with the MPT (base) driver at driver + * load/init time via the mpt_register() API call. + * + * Returns 1 indicating alloc'd request frame ptr should be freed. + */ +static int +mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) +{ + SCSITaskMgmtReply_t *pScsiTmReply; + SCSITaskMgmt_t *pScsiTmReq; + MPT_SCSI_HOST *hd; + unsigned long flags; + u16 iocstatus; + u8 tmType; + + dtmprintk((MYIOC_s_WARN_FMT "TaskMgmt completed (mf=%p,mr=%p)\n", + ioc->name, mf, mr)); + if (ioc->sh) { + /* Depending on the thread, a timer is activated for + * the TM request. Delete this timer on completion of TM. + * Decrement count of outstanding TM requests. + */ + hd = (MPT_SCSI_HOST *)ioc->sh->hostdata; + } else { + dtmprintk((MYIOC_s_WARN_FMT "TaskMgmt Complete: NULL Scsi Host Ptr\n", + ioc->name)); + return 1; + } + + if (mr == NULL) { + dtmprintk((MYIOC_s_WARN_FMT "ERROR! TaskMgmt Reply: NULL Request %p\n", + ioc->name, mf)); + return 1; + } else { + pScsiTmReply = (SCSITaskMgmtReply_t*)mr; + pScsiTmReq = (SCSITaskMgmt_t*)mf; + + /* Figure out if this was ABORT_TASK, TARGET_RESET, or BUS_RESET! */ + tmType = pScsiTmReq->TaskType; + + dtmprintk((MYIOC_s_WARN_FMT " TaskType = %d, TerminationCount=%d\n", + ioc->name, tmType, le32_to_cpu(pScsiTmReply->TerminationCount))); + DBG_DUMP_TM_REPLY_FRAME((u32 *)pScsiTmReply); + + iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK; + dtmprintk((MYIOC_s_WARN_FMT " SCSI TaskMgmt (%d) IOCStatus=%04x IOCLogInfo=%08x\n", + ioc->name, tmType, iocstatus, le32_to_cpu(pScsiTmReply->IOCLogInfo))); + /* Error? (anything non-zero?) */ + if (iocstatus) { + + /* clear flags and continue. + */ + if (tmType == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) + hd->abortSCpnt = NULL; + + /* If an internal command is present + * or the TM failed - reload the FW. + * FC FW may respond FAILED to an ABORT + */ + if (tmType == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) { + if ((hd->cmdPtr) || + (iocstatus == MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED)) { + if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0) { + printk((KERN_WARNING + " Firmware Reload FAILED!!\n")); + } + } + } + } else { + dtmprintk((MYIOC_s_WARN_FMT " TaskMgmt SUCCESS\n", ioc->name)); + + hd->abortSCpnt = NULL; + + } + } + + spin_lock_irqsave(&ioc->FreeQlock, flags); + hd->tmPending = 0; + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + hd->tmState = TM_STATE_NONE; + + return 1; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * This is anyones guess quite frankly. + */ +static int +mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev, + sector_t capacity, int geom[]) +{ + int heads; + int sectors; + sector_t cylinders; + ulong dummy; + + heads = 64; + sectors = 32; + + dummy = heads * sectors; + cylinders = capacity; + sector_div(cylinders,dummy); + + /* + * Handle extended translation size for logical drives + * > 1Gb + */ + if ((ulong)capacity >= 0x200000) { + heads = 255; + sectors = 63; + dummy = heads * sectors; + cylinders = capacity; + sector_div(cylinders,dummy); + } + + /* return result */ + geom[0] = heads; + geom[1] = sectors; + geom[2] = cylinders; + + dprintk((KERN_NOTICE + ": bios_param: Id=%i Lun=%i Channel=%i CHS=%i/%i/%i\n", + sdev->id, sdev->lun,sdev->channel,(int)cylinders,heads,sectors)); + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * OS entry point to allow host driver to alloc memory + * for each scsi device. Called once per device the bus scan. + * Return non-zero if allocation fails. + * Init memory once per id (not LUN). + */ +static int +mptscsih_slave_alloc(struct scsi_device *device) +{ + struct Scsi_Host *host = device->host; + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; + VirtDevice *vdev; + uint target = device->id; + + if (hd == NULL) + return -ENODEV; + + if ((vdev = hd->Targets[target]) != NULL) + goto out; + + vdev = kmalloc(sizeof(VirtDevice), GFP_KERNEL); + if (!vdev) { + printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n", + hd->ioc->name, sizeof(VirtDevice)); + return -ENOMEM; + } + + memset(vdev, 0, sizeof(VirtDevice)); + vdev->tflags = MPT_TARGET_FLAGS_Q_YES; + vdev->ioc_id = hd->ioc->id; + vdev->target_id = device->id; + vdev->bus_id = device->channel; + vdev->raidVolume = 0; + hd->Targets[device->id] = vdev; + if (hd->ioc->bus_type == SCSI) { + if (hd->ioc->spi_data.isRaid & (1 << device->id)) { + vdev->raidVolume = 1; + ddvtprintk((KERN_INFO + "RAID Volume @ id %d\n", device->id)); + } + } else { + vdev->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; + } + + out: + vdev->num_luns++; + return 0; +} + +static int mptscsih_is_raid_volume(MPT_SCSI_HOST *hd, uint id) +{ + int i; + + if (!hd->ioc->spi_data.isRaid || !hd->ioc->spi_data.pIocPg3) + return 0; + + for (i = 0; i < hd->ioc->spi_data.pIocPg3->NumPhysDisks; i++) { + if (id == hd->ioc->spi_data.pIocPg3->PhysDisk[i].PhysDiskID) + return 1; + } + + return 0; +} + +/* + * OS entry point to allow for host driver to free allocated memory + * Called if no device present or device being unloaded + */ +static void +mptscsih_slave_destroy(struct scsi_device *device) +{ + struct Scsi_Host *host = device->host; + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; + VirtDevice *vdev; + uint target = device->id; + uint lun = device->lun; + + if (hd == NULL) + return; + + mptscsih_search_running_cmds(hd, target, lun); + + vdev = hd->Targets[target]; + vdev->luns[0] &= ~(1 << lun); + if (--vdev->num_luns) + return; + + kfree(hd->Targets[target]); + hd->Targets[target] = NULL; + + if (hd->ioc->bus_type == SCSI) { + if (mptscsih_is_raid_volume(hd, target)) { + hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3; + } else { + hd->ioc->spi_data.dvStatus[target] = + MPT_SCSICFG_NEGOTIATE; + + if (!hd->negoNvram) { + hd->ioc->spi_data.dvStatus[target] |= + MPT_SCSICFG_DV_NOT_DONE; + } + } + } +} + +static void +mptscsih_set_queue_depth(struct scsi_device *device, MPT_SCSI_HOST *hd, + VirtDevice *pTarget, int qdepth) +{ + int max_depth; + int tagged; + + if (hd->ioc->bus_type == SCSI) { + if (pTarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY) { + if (!(pTarget->tflags & MPT_TARGET_FLAGS_Q_YES)) + max_depth = 1; + else if (((pTarget->inq_data[0] & 0x1f) == 0x00) && + (pTarget->minSyncFactor <= MPT_ULTRA160 )) + max_depth = MPT_SCSI_CMD_PER_DEV_HIGH; + else + max_depth = MPT_SCSI_CMD_PER_DEV_LOW; + } else { + /* error case - No Inq. Data */ + max_depth = 1; + } + } else + max_depth = MPT_SCSI_CMD_PER_DEV_HIGH; + + if (qdepth > max_depth) + qdepth = max_depth; + if (qdepth == 1) + tagged = 0; + else + tagged = MSG_SIMPLE_TAG; + + scsi_adjust_queue_depth(device, tagged, qdepth); +} + + +/* + * OS entry point to adjust the queue_depths on a per-device basis. + * Called once per device the bus scan. Use it to force the queue_depth + * member to 1 if a device does not support Q tags. + * Return non-zero if fails. + */ +static int +mptscsih_slave_configure(struct scsi_device *device) +{ + struct Scsi_Host *sh = device->host; + VirtDevice *pTarget; + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sh->hostdata; + + if ((hd == NULL) || (hd->Targets == NULL)) { + return 0; + } + + dsprintk((MYIOC_s_INFO_FMT + "device @ %p, id=%d, LUN=%d, channel=%d\n", + hd->ioc->name, device, device->id, device->lun, device->channel)); + dsprintk((MYIOC_s_INFO_FMT + "sdtr %d wdtr %d ppr %d inq length=%d\n", + hd->ioc->name, device->sdtr, device->wdtr, + device->ppr, device->inquiry_len)); + + if (device->id > sh->max_id) { + /* error case, should never happen */ + scsi_adjust_queue_depth(device, 0, 1); + goto slave_configure_exit; + } + + pTarget = hd->Targets[device->id]; + + if (pTarget == NULL) { + /* Driver doesn't know about this device. + * Kernel may generate a "Dummy Lun 0" which + * may become a real Lun if a + * "scsi add-single-device" command is executed + * while the driver is active (hot-plug a + * device). LSI Raid controllers need + * queue_depth set to DEV_HIGH for this reason. + */ + scsi_adjust_queue_depth(device, MSG_SIMPLE_TAG, + MPT_SCSI_CMD_PER_DEV_HIGH); + goto slave_configure_exit; + } + + mptscsih_initTarget(hd, device->channel, device->id, device->lun, + device->inquiry, device->inquiry_len ); + mptscsih_set_queue_depth(device, hd, pTarget, MPT_SCSI_CMD_PER_DEV_HIGH); + + dsprintk((MYIOC_s_INFO_FMT + "Queue depth=%d, tflags=%x\n", + hd->ioc->name, device->queue_depth, pTarget->tflags)); + + dsprintk((MYIOC_s_INFO_FMT + "negoFlags=%x, maxOffset=%x, SyncFactor=%x\n", + hd->ioc->name, pTarget->negoFlags, pTarget->maxOffset, pTarget->minSyncFactor)); + +slave_configure_exit: + + dsprintk((MYIOC_s_INFO_FMT + "tagged %d, simple %d, ordered %d\n", + hd->ioc->name,device->tagged_supported, device->simple_tags, + device->ordered_tags)); + + return 0; +} + +static ssize_t +mptscsih_store_queue_depth(struct device *dev, const char *buf, size_t count) +{ + int depth; + struct scsi_device *sdev = to_scsi_device(dev); + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *) sdev->host->hostdata; + VirtDevice *pTarget; + + depth = simple_strtoul(buf, NULL, 0); + if (depth == 0) + return -EINVAL; + pTarget = hd->Targets[sdev->id]; + if (pTarget == NULL) + return -EINVAL; + mptscsih_set_queue_depth(sdev, (MPT_SCSI_HOST *) sdev->host->hostdata, + pTarget, depth); + return count; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Private routines... + */ + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* Utility function to copy sense data from the scsi_cmnd buffer + * to the FC and SCSI target structures. + * + */ +static void +copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply) +{ + VirtDevice *target; + SCSIIORequest_t *pReq; + u32 sense_count = le32_to_cpu(pScsiReply->SenseCount); + int index; + + /* Get target structure + */ + pReq = (SCSIIORequest_t *) mf; + index = (int) pReq->TargetID; + target = hd->Targets[index]; + + if (sense_count) { + u8 *sense_data; + int req_index; + + /* Copy the sense received into the scsi command block. */ + req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); + sense_data = ((u8 *)hd->ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC)); + memcpy(sc->sense_buffer, sense_data, SNS_LEN(sc)); + + /* Log SMART data (asc = 0x5D, non-IM case only) if required. + */ + if ((hd->ioc->events) && (hd->ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) { + if ((sense_data[12] == 0x5D) && (target->raidVolume == 0)) { + int idx; + MPT_ADAPTER *ioc = hd->ioc; + + idx = ioc->eventContext % ioc->eventLogSize; + ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE; + ioc->events[idx].eventContext = ioc->eventContext; + + ioc->events[idx].data[0] = (pReq->LUN[1] << 24) || + (MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) || + (pReq->Bus << 8) || pReq->TargetID; + + ioc->events[idx].data[1] = (sense_data[13] << 8) || sense_data[12]; + + ioc->eventContext++; + } + } + } else { + dprintk((MYIOC_s_INFO_FMT "Hmmm... SenseData len=0! (?)\n", + hd->ioc->name)); + } +} + +static u32 +SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc) +{ + MPT_SCSI_HOST *hd; + int i; + + hd = (MPT_SCSI_HOST *) sc->device->host->hostdata; + + for (i = 0; i < hd->ioc->req_depth; i++) { + if (hd->ScsiLookup[i] == sc) { + return i; + } + } + + return -1; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int +mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) +{ + MPT_SCSI_HOST *hd; + unsigned long flags; + + dtmprintk((KERN_WARNING MYNAM + ": IOC %s_reset routed to SCSI host driver!\n", + reset_phase==MPT_IOC_SETUP_RESET ? "setup" : ( + reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post"))); + + /* If a FW reload request arrives after base installed but + * before all scsi hosts have been attached, then an alt_ioc + * may have a NULL sh pointer. + */ + if ((ioc->sh == NULL) || (ioc->sh->hostdata == NULL)) + return 0; + else + hd = (MPT_SCSI_HOST *) ioc->sh->hostdata; + + if (reset_phase == MPT_IOC_SETUP_RESET) { + dtmprintk((MYIOC_s_WARN_FMT "Setup-Diag Reset\n", ioc->name)); + + /* Clean Up: + * 1. Set Hard Reset Pending Flag + * All new commands go to doneQ + */ + hd->resetPending = 1; + + } else if (reset_phase == MPT_IOC_PRE_RESET) { + dtmprintk((MYIOC_s_WARN_FMT "Pre-Diag Reset\n", ioc->name)); + + /* 2. Flush running commands + * Clean ScsiLookup (and associated memory) + * AND clean mytaskQ + */ + + /* 2b. Reply to OS all known outstanding I/O commands. + */ + mptscsih_flush_running_cmds(hd); + + /* 2c. If there was an internal command that + * has not completed, configuration or io request, + * free these resources. + */ + if (hd->cmdPtr) { + del_timer(&hd->timer); + mpt_free_msg_frame(ioc, hd->cmdPtr); + } + + dtmprintk((MYIOC_s_WARN_FMT "Pre-Reset complete.\n", ioc->name)); + + } else { + dtmprintk((MYIOC_s_WARN_FMT "Post-Diag Reset\n", ioc->name)); + + /* Once a FW reload begins, all new OS commands are + * redirected to the doneQ w/ a reset status. + * Init all control structures. + */ + + /* ScsiLookup initialization + */ + { + int ii; + for (ii=0; ii < hd->ioc->req_depth; ii++) + hd->ScsiLookup[ii] = NULL; + } + + /* 2. Chain Buffer initialization + */ + + /* 4. Renegotiate to all devices, if SCSI + */ + if (ioc->bus_type == SCSI) { + dnegoprintk(("writeSDP1: ALL_IDS USE_NVRAM\n")); + mptscsih_writeSDP1(hd, 0, 0, MPT_SCSICFG_ALL_IDS | MPT_SCSICFG_USE_NVRAM); + } + + /* 5. Enable new commands to be posted + */ + spin_lock_irqsave(&ioc->FreeQlock, flags); + hd->tmPending = 0; + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + hd->resetPending = 0; + hd->tmState = TM_STATE_NONE; + + /* 6. If there was an internal command, + * wake this process up. + */ + if (hd->cmdPtr) { + /* + * Wake up the original calling thread + */ + hd->pLocal = &hd->localReply; + hd->pLocal->completion = MPT_SCANDV_DID_RESET; + scandv_wait_done = 1; + wake_up(&scandv_waitq); + hd->cmdPtr = NULL; + } + + /* 7. Set flag to force DV and re-read IOC Page 3 + */ + if (ioc->bus_type == SCSI) { + ioc->spi_data.forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3; + ddvtprintk(("Set reload IOC Pg3 Flag\n")); + } + + dtmprintk((MYIOC_s_WARN_FMT "Post-Reset complete.\n", ioc->name)); + + } + + return 1; /* currently means nothing really */ +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static int +mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) +{ + MPT_SCSI_HOST *hd; + u8 event = le32_to_cpu(pEvReply->Event) & 0xFF; + + devtprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n", + ioc->name, event)); + + switch (event) { + case MPI_EVENT_UNIT_ATTENTION: /* 03 */ + /* FIXME! */ + break; + case MPI_EVENT_IOC_BUS_RESET: /* 04 */ + case MPI_EVENT_EXT_BUS_RESET: /* 05 */ + hd = NULL; + if (ioc->sh) { + hd = (MPT_SCSI_HOST *) ioc->sh->hostdata; + if (hd && (ioc->bus_type == SCSI) && (hd->soft_resets < -1)) + hd->soft_resets++; + } + break; + case MPI_EVENT_LOGOUT: /* 09 */ + /* FIXME! */ + break; + + /* + * CHECKME! Don't think we need to do + * anything for these, but... + */ + case MPI_EVENT_RESCAN: /* 06 */ + case MPI_EVENT_LINK_STATUS_CHANGE: /* 07 */ + case MPI_EVENT_LOOP_STATE_CHANGE: /* 08 */ + /* + * CHECKME! Falling thru... + */ + break; + + case MPI_EVENT_INTEGRATED_RAID: /* 0B */ +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION + /* negoNvram set to 0 if DV enabled and to USE_NVRAM if + * if DV disabled. Need to check for target mode. + */ + hd = NULL; + if (ioc->sh) + hd = (MPT_SCSI_HOST *) ioc->sh->hostdata; + + if (hd && (ioc->bus_type == SCSI) && (hd->negoNvram == 0)) { + ScsiCfgData *pSpi; + Ioc3PhysDisk_t *pPDisk; + int numPDisk; + u8 reason; + u8 physDiskNum; + + reason = (le32_to_cpu(pEvReply->Data[0]) & 0x00FF0000) >> 16; + if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { + /* New or replaced disk. + * Set DV flag and schedule DV. + */ + pSpi = &ioc->spi_data; + physDiskNum = (le32_to_cpu(pEvReply->Data[0]) & 0xFF000000) >> 24; + ddvtprintk(("DV requested for phys disk id %d\n", physDiskNum)); + if (pSpi->pIocPg3) { + pPDisk = pSpi->pIocPg3->PhysDisk; + numPDisk =pSpi->pIocPg3->NumPhysDisks; + + while (numPDisk) { + if (physDiskNum == pPDisk->PhysDiskNum) { + pSpi->dvStatus[pPDisk->PhysDiskID] = (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE); + pSpi->forceDv = MPT_SCSICFG_NEED_DV; + ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID)); + break; + } + pPDisk++; + numPDisk--; + } + + if (numPDisk == 0) { + /* The physical disk that needs DV was not found + * in the stored IOC Page 3. The driver must reload + * this page. DV routine will set the NEED_DV flag for + * all phys disks that have DV_NOT_DONE set. + */ + pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3; + ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n", physDiskNum)); + } + } + } + } +#endif + +#if defined(MPT_DEBUG_DV) || defined(MPT_DEBUG_DV_TINY) + printk("Raid Event RF: "); + { + u32 *m = (u32 *)pEvReply; + int ii; + int n = (int)pEvReply->MsgLength; + for (ii=6; ii < n; ii++) + printk(" %08x", le32_to_cpu(m[ii])); + printk("\n"); + } +#endif + break; + + case MPI_EVENT_NONE: /* 00 */ + case MPI_EVENT_LOG_DATA: /* 01 */ + case MPI_EVENT_STATE_CHANGE: /* 02 */ + case MPI_EVENT_EVENT_CHANGE: /* 0A */ + default: + dprintk((KERN_INFO " Ignoring event (=%02Xh)\n", event)); + break; + } + + return 1; /* currently means nothing really */ +} + +static struct device_attribute mptscsih_queue_depth_attr = { + .attr = { + .name = "queue_depth", + .mode = S_IWUSR, + }, + .store = mptscsih_store_queue_depth, +}; + +static struct device_attribute *mptscsih_dev_attrs[] = { + &mptscsih_queue_depth_attr, + NULL, +}; + +static struct scsi_host_template driver_template = { + .proc_name = "mptscsih", + .proc_info = mptscsih_proc_info, + .name = "MPT SCSI Host", + .info = mptscsih_info, + .queuecommand = mptscsih_qcmd, + .slave_alloc = mptscsih_slave_alloc, + .slave_configure = mptscsih_slave_configure, + .slave_destroy = mptscsih_slave_destroy, + .eh_abort_handler = mptscsih_abort, + .eh_device_reset_handler = mptscsih_dev_reset, + .eh_bus_reset_handler = mptscsih_bus_reset, + .eh_host_reset_handler = mptscsih_host_reset, + .bios_param = mptscsih_bios_param, + .can_queue = MPT_SCSI_CAN_QUEUE, + .this_id = -1, + .sg_tablesize = MPT_SCSI_SG_DEPTH, + .max_sectors = 8192, + .cmd_per_lun = 7, + .use_clustering = ENABLE_CLUSTERING, + .sdev_attrs = mptscsih_dev_attrs, +}; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptscsih_initTarget - Target, LUN alloc/free functionality. + * @hd: Pointer to MPT_SCSI_HOST structure + * @bus_id: Bus number (?) + * @target_id: SCSI target id + * @lun: SCSI LUN id + * @data: Pointer to data + * @dlen: Number of INQUIRY bytes + * + * NOTE: It's only SAFE to call this routine if data points to + * sane & valid STANDARD INQUIRY data! + * + * Allocate and initialize memory for this target. + * Save inquiry data. + * + */ +static void +mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *data, int dlen) +{ + int indexed_lun, lun_index; + VirtDevice *vdev; + ScsiCfgData *pSpi; + char data_56; + + dinitprintk((MYIOC_s_INFO_FMT "initTarget bus=%d id=%d lun=%d hd=%p\n", + hd->ioc->name, bus_id, target_id, lun, hd)); + + /* + * If the peripheral qualifier filter is enabled then if the target reports a 0x1 + * (i.e. The targer is capable of supporting the specified peripheral device type + * on this logical unit; however, the physical device is not currently connected + * to this logical unit) it will be converted to a 0x3 (i.e. The target is not + * capable of supporting a physical device on this logical unit). This is to work + * around a bug in th emid-layer in some distributions in which the mid-layer will + * continue to try to communicate to the LUN and evntually create a dummy LUN. + */ + if (mpt_pq_filter && dlen && (data[0] & 0xE0)) + data[0] |= 0x40; + + /* Is LUN supported? If so, upper 2 bits will be 0 + * in first byte of inquiry data. + */ + if (data[0] & 0xe0) + return; + + if ((vdev = hd->Targets[target_id]) == NULL) { + return; + } + + lun_index = (lun >> 5); /* 32 luns per lun_index */ + indexed_lun = (lun % 32); + vdev->luns[lun_index] |= (1 << indexed_lun); + + if (hd->ioc->bus_type == SCSI) { + if ((data[0] == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) { + /* Treat all Processors as SAF-TE if + * command line option is set */ + vdev->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; + mptscsih_writeIOCPage4(hd, target_id, bus_id); + }else if ((data[0] == TYPE_PROCESSOR) && + !(vdev->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) { + if ( dlen > 49 ) { + vdev->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; + if ( data[44] == 'S' && + data[45] == 'A' && + data[46] == 'F' && + data[47] == '-' && + data[48] == 'T' && + data[49] == 'E' ) { + vdev->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; + mptscsih_writeIOCPage4(hd, target_id, bus_id); + } + } + } + if (!(vdev->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY)) { + if ( dlen > 8 ) { + memcpy (vdev->inq_data, data, 8); + } else { + memcpy (vdev->inq_data, data, dlen); + } + + /* If have not done DV, set the DV flag. + */ + pSpi = &hd->ioc->spi_data; + if ((data[0] == TYPE_TAPE) || (data[0] == TYPE_PROCESSOR)) { + if (pSpi->dvStatus[target_id] & MPT_SCSICFG_DV_NOT_DONE) + pSpi->dvStatus[target_id] |= MPT_SCSICFG_NEED_DV; + } + + vdev->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; + + + data_56 = 0x0F; /* Default to full capabilities if Inq data length is < 57 */ + if (dlen > 56) { + if ( (!(vdev->tflags & MPT_TARGET_FLAGS_VALID_56))) { + /* Update the target capabilities + */ + data_56 = data[56]; + vdev->tflags |= MPT_TARGET_FLAGS_VALID_56; + } + } + mptscsih_setTargetNegoParms(hd, vdev, data_56); + } else { + /* Initial Inquiry may not request enough data bytes to + * obtain byte 57. DV will; if target doesn't return + * at least 57 bytes, data[56] will be zero. */ + if (dlen > 56) { + if ( (!(vdev->tflags & MPT_TARGET_FLAGS_VALID_56))) { + /* Update the target capabilities + */ + data_56 = data[56]; + vdev->tflags |= MPT_TARGET_FLAGS_VALID_56; + mptscsih_setTargetNegoParms(hd, vdev, data_56); + } + } + } + } +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Update the target negotiation parameters based on the + * the Inquiry data, adapter capabilities, and NVRAM settings. + * + */ +static void +mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56) +{ + ScsiCfgData *pspi_data = &hd->ioc->spi_data; + int id = (int) target->target_id; + int nvram; + VirtDevice *vdev; + int ii; + u8 width = MPT_NARROW; + u8 factor = MPT_ASYNC; + u8 offset = 0; + u8 version, nfactor; + u8 noQas = 1; + + target->negoFlags = pspi_data->noQas; + + /* noQas == 0 => device supports QAS. Need byte 56 of Inq to determine + * support. If available, default QAS to off and allow enabling. + * If not available, default QAS to on, turn off for non-disks. + */ + + /* Set flags based on Inquiry data + */ + version = target->inq_data[2] & 0x07; + if (version < 2) { + width = 0; + factor = MPT_ULTRA2; + offset = pspi_data->maxSyncOffset; + target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; + } else { + if (target->inq_data[7] & 0x20) { + width = 1; + } + + if (target->inq_data[7] & 0x10) { + factor = pspi_data->minSyncFactor; + if (target->tflags & MPT_TARGET_FLAGS_VALID_56) { + /* bits 2 & 3 show Clocking support */ + if ((byte56 & 0x0C) == 0) + factor = MPT_ULTRA2; + else { + if ((byte56 & 0x03) == 0) + factor = MPT_ULTRA160; + else { + factor = MPT_ULTRA320; + if (byte56 & 0x02) + { + ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", byte56, id)); + noQas = 0; + } + if (target->inq_data[0] == TYPE_TAPE) { + if (byte56 & 0x01) + target->negoFlags |= MPT_TAPE_NEGO_IDP; + } + } + } + } else { + ddvtprintk((KERN_INFO "Enabling QAS on id=%d due to ~TARGET_FLAGS_VALID_56!\n", id)); + noQas = 0; + } + + offset = pspi_data->maxSyncOffset; + + /* If RAID, never disable QAS + * else if non RAID, do not disable + * QAS if bit 1 is set + * bit 1 QAS support, non-raid only + * bit 0 IU support + */ + if (target->raidVolume == 1) { + noQas = 0; + } + } else { + factor = MPT_ASYNC; + offset = 0; + } + } + + if ( (target->inq_data[7] & 0x02) == 0) { + target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; + } + + /* Update tflags based on NVRAM settings. (SCSI only) + */ + if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) { + nvram = pspi_data->nvram[id]; + nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8; + + if (width) + width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; + + if (offset > 0) { + /* Ensure factor is set to the + * maximum of: adapter, nvram, inquiry + */ + if (nfactor) { + if (nfactor < pspi_data->minSyncFactor ) + nfactor = pspi_data->minSyncFactor; + + factor = max(factor, nfactor); + if (factor == MPT_ASYNC) + offset = 0; + } else { + offset = 0; + factor = MPT_ASYNC; + } + } else { + factor = MPT_ASYNC; + } + } + + /* Make sure data is consistent + */ + if ((!width) && (factor < MPT_ULTRA2)) { + factor = MPT_ULTRA2; + } + + /* Save the data to the target structure. + */ + target->minSyncFactor = factor; + target->maxOffset = offset; + target->maxWidth = width; + + target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO; + + /* Disable unused features. + */ + if (!width) + target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE; + + if (!offset) + target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC; + + if ( factor > MPT_ULTRA320 ) + noQas = 0; + + /* GEM, processor WORKAROUND + */ + if ((target->inq_data[0] == TYPE_PROCESSOR) || (target->inq_data[0] > 0x08)) { + target->negoFlags |= (MPT_TARGET_NO_NEGO_WIDE | MPT_TARGET_NO_NEGO_SYNC); + pspi_data->dvStatus[id] |= MPT_SCSICFG_BLK_NEGO; + } else { + if (noQas && (pspi_data->noQas == 0)) { + pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS; + target->negoFlags |= MPT_TARGET_NO_NEGO_QAS; + + /* Disable QAS in a mixed configuration case + */ + + ddvtprintk((KERN_INFO "Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id)); + for (ii = 0; ii < id; ii++) { + if ( (vdev = hd->Targets[ii]) ) { + vdev->negoFlags |= MPT_TARGET_NO_NEGO_QAS; + mptscsih_writeSDP1(hd, 0, ii, vdev->negoFlags); + } + } + } + } + + /* Write SDP1 on this I/O to this target */ + if (pspi_data->dvStatus[id] & MPT_SCSICFG_NEGOTIATE) { + ddvtprintk((KERN_INFO "MPT_SCSICFG_NEGOTIATE on id=%d!\n", id)); + mptscsih_writeSDP1(hd, 0, id, hd->negoNvram); + pspi_data->dvStatus[id] &= ~MPT_SCSICFG_NEGOTIATE; + } else if (pspi_data->dvStatus[id] & MPT_SCSICFG_BLK_NEGO) { + ddvtprintk((KERN_INFO "MPT_SCSICFG_BLK_NEGO on id=%d!\n", id)); + mptscsih_writeSDP1(hd, 0, id, MPT_SCSICFG_BLK_NEGO); + pspi_data->dvStatus[id] &= ~MPT_SCSICFG_BLK_NEGO; + } +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* If DV disabled (negoNvram set to USE_NVARM) or if not LUN 0, return. + * Else set the NEED_DV flag after Read Capacity Issued (disks) + * or Mode Sense (cdroms). + * + * Tapes, initTarget will set this flag on completion of Inquiry command. + * Called only if DV_NOT_DONE flag is set + */ +static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq) +{ + u8 cmd; + ScsiCfgData *pSpi; + + ddvtprintk((" set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n", + pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0])); + + if ((pReq->LUN[1] != 0) || (hd->negoNvram != 0)) + return; + + cmd = pReq->CDB[0]; + + if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) { + pSpi = &hd->ioc->spi_data; + if ((pSpi->isRaid & (1 << pReq->TargetID)) && pSpi->pIocPg3) { + /* Set NEED_DV for all hidden disks + */ + Ioc3PhysDisk_t *pPDisk = pSpi->pIocPg3->PhysDisk; + int numPDisk = pSpi->pIocPg3->NumPhysDisks; + + while (numPDisk) { + pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV; + ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID)); + pPDisk++; + numPDisk--; + } + } + pSpi->dvStatus[pReq->TargetID] |= MPT_SCSICFG_NEED_DV; + ddvtprintk(("NEED_DV set for visible disk id %d\n", pReq->TargetID)); + } +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * If no Target, bus reset on 1st I/O. Set the flag to + * prevent any future negotiations to this device. + */ +static void mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id) +{ + + if ((hd->Targets) && (hd->Targets[target_id] == NULL)) + hd->ioc->spi_data.dvStatus[target_id] |= MPT_SCSICFG_BLK_NEGO; + + return; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * SCSI Config Page functionality ... + */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* mptscsih_setDevicePage1Flags - add Requested and Configuration fields flags + * based on width, factor and offset parameters. + * @width: bus width + * @factor: sync factor + * @offset: sync offset + * @requestedPtr: pointer to requested values (updated) + * @configurationPtr: pointer to configuration values (updated) + * @flags: flags to block WDTR or SDTR negotiation + * + * Return: None. + * + * Remark: Called by writeSDP1 and _dv_params + */ +static void +mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *requestedPtr, int *configurationPtr, u8 flags) +{ + u8 nowide = flags & MPT_TARGET_NO_NEGO_WIDE; + u8 nosync = flags & MPT_TARGET_NO_NEGO_SYNC; + + *configurationPtr = 0; + *requestedPtr = width ? MPI_SCSIDEVPAGE1_RP_WIDE : 0; + *requestedPtr |= (offset << 16) | (factor << 8); + + if (width && offset && !nowide && !nosync) { + if (factor < MPT_ULTRA160) { + *requestedPtr |= (MPI_SCSIDEVPAGE1_RP_IU + MPI_SCSIDEVPAGE1_RP_DT); + if ((flags & MPT_TARGET_NO_NEGO_QAS) == 0) + *requestedPtr |= MPI_SCSIDEVPAGE1_RP_QAS; + if (flags & MPT_TAPE_NEGO_IDP) + *requestedPtr |= 0x08000000; + } else if (factor < MPT_ULTRA2) { + *requestedPtr |= MPI_SCSIDEVPAGE1_RP_DT; + } + } + + if (nowide) + *configurationPtr |= MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED; + + if (nosync) + *configurationPtr |= MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED; + + return; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* mptscsih_writeSDP1 - write SCSI Device Page 1 + * @hd: Pointer to a SCSI Host Strucutre + * @portnum: IOC port number + * @target_id: writeSDP1 for single ID + * @flags: MPT_SCSICFG_ALL_IDS, MPT_SCSICFG_USE_NVRAM, MPT_SCSICFG_BLK_NEGO + * + * Return: -EFAULT if read of config page header fails + * or 0 if success. + * + * Remark: If a target has been found, the settings from the + * target structure are used, else the device is set + * to async/narrow. + * + * Remark: Called during init and after a FW reload. + * Remark: We do not wait for a return, write pages sequentially. + */ +static int +mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags) +{ + MPT_ADAPTER *ioc = hd->ioc; + Config_t *pReq; + SCSIDevicePage1_t *pData; + VirtDevice *pTarget; + MPT_FRAME_HDR *mf; + dma_addr_t dataDma; + u16 req_idx; + u32 frameOffset; + u32 requested, configuration, flagsLength; + int ii, nvram; + int id = 0, maxid = 0; + u8 width; + u8 factor; + u8 offset; + u8 bus = 0; + u8 negoFlags; + u8 maxwidth, maxoffset, maxfactor; + + if (ioc->spi_data.sdp1length == 0) + return 0; + + if (flags & MPT_SCSICFG_ALL_IDS) { + id = 0; + maxid = ioc->sh->max_id - 1; + } else if (ioc->sh) { + id = target_id; + maxid = min_t(int, id, ioc->sh->max_id - 1); + } + + for (; id <= maxid; id++) { + + if (id == ioc->pfacts[portnum].PortSCSIID) + continue; + + /* Use NVRAM to get adapter and target maximums + * Data over-riden by target structure information, if present + */ + maxwidth = ioc->spi_data.maxBusWidth; + maxoffset = ioc->spi_data.maxSyncOffset; + maxfactor = ioc->spi_data.minSyncFactor; + if (ioc->spi_data.nvram && (ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) { + nvram = ioc->spi_data.nvram[id]; + + if (maxwidth) + maxwidth = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; + + if (maxoffset > 0) { + maxfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8; + if (maxfactor == 0) { + /* Key for async */ + maxfactor = MPT_ASYNC; + maxoffset = 0; + } else if (maxfactor < ioc->spi_data.minSyncFactor) { + maxfactor = ioc->spi_data.minSyncFactor; + } + } else + maxfactor = MPT_ASYNC; + } + + /* Set the negotiation flags. + */ + negoFlags = ioc->spi_data.noQas; + if (!maxwidth) + negoFlags |= MPT_TARGET_NO_NEGO_WIDE; + + if (!maxoffset) + negoFlags |= MPT_TARGET_NO_NEGO_SYNC; + + if (flags & MPT_SCSICFG_USE_NVRAM) { + width = maxwidth; + factor = maxfactor; + offset = maxoffset; + } else { + width = 0; + factor = MPT_ASYNC; + offset = 0; + //negoFlags = 0; + //negoFlags = MPT_TARGET_NO_NEGO_SYNC; + } + + /* If id is not a raid volume, get the updated + * transmission settings from the target structure. + */ + if (hd->Targets && (pTarget = hd->Targets[id]) && !pTarget->raidVolume) { + width = pTarget->maxWidth; + factor = pTarget->minSyncFactor; + offset = pTarget->maxOffset; + negoFlags = pTarget->negoFlags; + } + +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION + /* Force to async and narrow if DV has not been executed + * for this ID + */ + if ((hd->ioc->spi_data.dvStatus[id] & MPT_SCSICFG_DV_NOT_DONE) != 0) { + width = 0; + factor = MPT_ASYNC; + offset = 0; + } +#endif + + if (flags & MPT_SCSICFG_BLK_NEGO) + negoFlags = MPT_TARGET_NO_NEGO_WIDE | MPT_TARGET_NO_NEGO_SYNC; + + mptscsih_setDevicePage1Flags(width, factor, offset, + &requested, &configuration, negoFlags); + dnegoprintk(("writeSDP1: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n", + target_id, width, factor, offset, negoFlags, requested, configuration)); + + /* Get a MF for this command. + */ + if ((mf = mpt_get_msg_frame(ScsiDoneCtx, ioc)) == NULL) { + dprintk((MYIOC_s_WARN_FMT "write SDP1: no msg frames!\n", + ioc->name)); + return -EAGAIN; + } + + ddvprintk((MYIOC_s_INFO_FMT "WriteSDP1 (mf=%p, id=%d, req=0x%x, cfg=0x%x)\n", + hd->ioc->name, mf, id, requested, configuration)); + + + /* Set the request and the data pointers. + * Request takes: 36 bytes (32 bit SGE) + * SCSI Device Page 1 requires 16 bytes + * 40 + 16 <= size of SCSI IO Request = 56 bytes + * and MF size >= 64 bytes. + * Place data at end of MF. + */ + pReq = (Config_t *)mf; + + req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); + frameOffset = ioc->req_sz - sizeof(SCSIDevicePage1_t); + + pData = (SCSIDevicePage1_t *)((u8 *) mf + frameOffset); + dataDma = ioc->req_frames_dma + (req_idx * ioc->req_sz) + frameOffset; + + /* Complete the request frame (same for all requests). + */ + pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; + pReq->Reserved = 0; + pReq->ChainOffset = 0; + pReq->Function = MPI_FUNCTION_CONFIG; + pReq->ExtPageLength = 0; + pReq->ExtPageType = 0; + pReq->MsgFlags = 0; + for (ii=0; ii < 8; ii++) { + pReq->Reserved2[ii] = 0; + } + pReq->Header.PageVersion = ioc->spi_data.sdp1version; + pReq->Header.PageLength = ioc->spi_data.sdp1length; + pReq->Header.PageNumber = 1; + pReq->Header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; + pReq->PageAddress = cpu_to_le32(id | (bus << 8 )); + + /* Add a SGE to the config request. + */ + flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE | ioc->spi_data.sdp1length * 4; + + mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma); + + /* Set up the common data portion + */ + pData->Header.PageVersion = pReq->Header.PageVersion; + pData->Header.PageLength = pReq->Header.PageLength; + pData->Header.PageNumber = pReq->Header.PageNumber; + pData->Header.PageType = pReq->Header.PageType; + pData->RequestedParameters = cpu_to_le32(requested); + pData->Reserved = 0; + pData->Configuration = cpu_to_le32(configuration); + + dprintk((MYIOC_s_INFO_FMT + "write SDP1: id %d pgaddr 0x%x req 0x%x config 0x%x\n", + ioc->name, id, (id | (bus<<8)), + requested, configuration)); + + mpt_put_msg_frame(ScsiDoneCtx, ioc, mf); + } + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* mptscsih_writeIOCPage4 - write IOC Page 4 + * @hd: Pointer to a SCSI Host Structure + * @target_id: write IOC Page4 for this ID & Bus + * + * Return: -EAGAIN if unable to obtain a Message Frame + * or 0 if success. + * + * Remark: We do not wait for a return, write pages sequentially. + */ +static int +mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus) +{ + MPT_ADAPTER *ioc = hd->ioc; + Config_t *pReq; + IOCPage4_t *IOCPage4Ptr; + MPT_FRAME_HDR *mf; + dma_addr_t dataDma; + u16 req_idx; + u32 frameOffset; + u32 flagsLength; + int ii; + + /* Get a MF for this command. + */ + if ((mf = mpt_get_msg_frame(ScsiDoneCtx, ioc)) == NULL) { + dprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n", + ioc->name)); + return -EAGAIN; + } + + /* Set the request and the data pointers. + * Place data at end of MF. + */ + pReq = (Config_t *)mf; + + req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); + frameOffset = ioc->req_sz - sizeof(IOCPage4_t); + + /* Complete the request frame (same for all requests). + */ + pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; + pReq->Reserved = 0; + pReq->ChainOffset = 0; + pReq->Function = MPI_FUNCTION_CONFIG; + pReq->ExtPageLength = 0; + pReq->ExtPageType = 0; + pReq->MsgFlags = 0; + for (ii=0; ii < 8; ii++) { + pReq->Reserved2[ii] = 0; + } + + IOCPage4Ptr = ioc->spi_data.pIocPg4; + dataDma = ioc->spi_data.IocPg4_dma; + ii = IOCPage4Ptr->ActiveSEP++; + IOCPage4Ptr->SEP[ii].SEPTargetID = target_id; + IOCPage4Ptr->SEP[ii].SEPBus = bus; + pReq->Header = IOCPage4Ptr->Header; + pReq->PageAddress = cpu_to_le32(target_id | (bus << 8 )); + + /* Add a SGE to the config request. + */ + flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE | + (IOCPage4Ptr->Header.PageLength + ii) * 4; + + mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma); + + dinitprintk((MYIOC_s_INFO_FMT + "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n", + ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, target_id, bus)); + + mpt_put_msg_frame(ScsiDoneCtx, ioc, mf); + + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * Bus Scan and Domain Validation functionality ... + */ + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptscsih_scandv_complete - Scan and DV callback routine registered + * to Fustion MPT (base) driver. + * + * @ioc: Pointer to MPT_ADAPTER structure + * @mf: Pointer to original MPT request frame + * @mr: Pointer to MPT reply frame (NULL if TurboReply) + * + * This routine is called from mpt.c::mpt_interrupt() at the completion + * of any SCSI IO request. + * This routine is registered with the Fusion MPT (base) driver at driver + * load/init time via the mpt_register() API call. + * + * Returns 1 indicating alloc'd request frame ptr should be freed. + * + * Remark: Sets a completion code and (possibly) saves sense data + * in the IOC member localReply structure. + * Used ONLY for DV and other internal commands. + */ +static int +mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) +{ + MPT_SCSI_HOST *hd; + SCSIIORequest_t *pReq; + int completionCode; + u16 req_idx; + + if ((mf == NULL) || + (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) { + printk(MYIOC_s_ERR_FMT + "ScanDvComplete, %s req frame ptr! (=%p)\n", + ioc->name, mf?"BAD":"NULL", (void *) mf); + goto wakeup; + } + + hd = (MPT_SCSI_HOST *) ioc->sh->hostdata; + del_timer(&hd->timer); + req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); + hd->ScsiLookup[req_idx] = NULL; + pReq = (SCSIIORequest_t *) mf; + + if (mf != hd->cmdPtr) { + printk(MYIOC_s_WARN_FMT "ScanDvComplete (mf=%p, cmdPtr=%p, idx=%d)\n", + hd->ioc->name, (void *)mf, (void *) hd->cmdPtr, req_idx); + } + hd->cmdPtr = NULL; + + ddvprintk((MYIOC_s_INFO_FMT "ScanDvComplete (mf=%p,mr=%p,idx=%d)\n", + hd->ioc->name, mf, mr, req_idx)); + + hd->pLocal = &hd->localReply; + hd->pLocal->scsiStatus = 0; + + /* If target struct exists, clear sense valid flag. + */ + if (mr == NULL) { + completionCode = MPT_SCANDV_GOOD; + } else { + SCSIIOReply_t *pReply; + u16 status; + u8 scsi_status; + + pReply = (SCSIIOReply_t *) mr; + + status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK; + scsi_status = pReply->SCSIStatus; + + ddvtprintk((KERN_NOTICE " IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh, IOCLogInfo=%08xh\n", + status, pReply->SCSIState, scsi_status, + le32_to_cpu(pReply->IOCLogInfo))); + + switch(status) { + + case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ + completionCode = MPT_SCANDV_SELECTION_TIMEOUT; + break; + + case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ + case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ + case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ + case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ + completionCode = MPT_SCANDV_DID_RESET; + break; + + case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ + case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ + case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */ + if (pReply->Function == MPI_FUNCTION_CONFIG) { + ConfigReply_t *pr = (ConfigReply_t *)mr; + completionCode = MPT_SCANDV_GOOD; + hd->pLocal->header.PageVersion = pr->Header.PageVersion; + hd->pLocal->header.PageLength = pr->Header.PageLength; + hd->pLocal->header.PageNumber = pr->Header.PageNumber; + hd->pLocal->header.PageType = pr->Header.PageType; + + } else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) { + /* If the RAID Volume request is successful, + * return GOOD, else indicate that + * some type of error occurred. + */ + MpiRaidActionReply_t *pr = (MpiRaidActionReply_t *)mr; + if (pr->ActionStatus == MPI_RAID_ACTION_ASTATUS_SUCCESS) + completionCode = MPT_SCANDV_GOOD; + else + completionCode = MPT_SCANDV_SOME_ERROR; + + } else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) { + u8 *sense_data; + int sz; + + /* save sense data in global structure + */ + completionCode = MPT_SCANDV_SENSE; + hd->pLocal->scsiStatus = scsi_status; + sense_data = ((u8 *)hd->ioc->sense_buf_pool + + (req_idx * MPT_SENSE_BUFFER_ALLOC)); + + sz = min_t(int, pReq->SenseBufferLength, + SCSI_STD_SENSE_BYTES); + memcpy(hd->pLocal->sense, sense_data, sz); + + ddvprintk((KERN_NOTICE " Check Condition, sense ptr %p\n", + sense_data)); + } else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) { + if (pReq->CDB[0] == INQUIRY) + completionCode = MPT_SCANDV_ISSUE_SENSE; + else + completionCode = MPT_SCANDV_DID_RESET; + } + else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS) + completionCode = MPT_SCANDV_DID_RESET; + else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED) + completionCode = MPT_SCANDV_DID_RESET; + else { + completionCode = MPT_SCANDV_GOOD; + hd->pLocal->scsiStatus = scsi_status; + } + break; + + case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ + if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED) + completionCode = MPT_SCANDV_DID_RESET; + else + completionCode = MPT_SCANDV_SOME_ERROR; + break; + + default: + completionCode = MPT_SCANDV_SOME_ERROR; + break; + + } /* switch(status) */ + + ddvtprintk((KERN_NOTICE " completionCode set to %08xh\n", + completionCode)); + } /* end of address reply case */ + + hd->pLocal->completion = completionCode; + + /* MF and RF are freed in mpt_interrupt + */ +wakeup: + /* Free Chain buffers (will never chain) in scan or dv */ + //mptscsih_freeChainBuffers(ioc, req_idx); + + /* + * Wake up the original calling thread + */ + scandv_wait_done = 1; + wake_up(&scandv_waitq); + + return 1; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* mptscsih_timer_expired - Call back for timer process. + * Used only for dv functionality. + * @data: Pointer to MPT_SCSI_HOST recast as an unsigned long + * + */ +static void mptscsih_timer_expired(unsigned long data) +{ + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *) data; + + ddvprintk((MYIOC_s_WARN_FMT "Timer Expired! Cmd %p\n", hd->ioc->name, hd->cmdPtr)); + + if (hd->cmdPtr) { + MPIHeader_t *cmd = (MPIHeader_t *)hd->cmdPtr; + + if (cmd->Function == MPI_FUNCTION_SCSI_IO_REQUEST) { + /* Desire to issue a task management request here. + * TM requests MUST be single threaded. + * If old eh code and no TM current, issue request. + * If new eh code, do nothing. Wait for OS cmd timeout + * for bus reset. + */ + ddvtprintk((MYIOC_s_NOTE_FMT "DV Cmd Timeout: NoOp\n", hd->ioc->name)); + } else { + /* Perform a FW reload */ + if (mpt_HardResetHandler(hd->ioc, NO_SLEEP) < 0) { + printk(MYIOC_s_WARN_FMT "Firmware Reload FAILED!\n", hd->ioc->name); + } + } + } else { + /* This should NEVER happen */ + printk(MYIOC_s_WARN_FMT "Null cmdPtr!!!!\n", hd->ioc->name); + } + + /* No more processing. + * TM call will generate an interrupt for SCSI TM Management. + * The FW will reply to all outstanding commands, callback will finish cleanup. + * Hard reset clean-up will free all resources. + */ + ddvprintk((MYIOC_s_WARN_FMT "Timer Expired Complete!\n", hd->ioc->name)); + + return; +} + +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* mptscsih_do_raid - Format and Issue a RAID volume request message. + * @hd: Pointer to scsi host structure + * @action: What do be done. + * @id: Logical target id. + * @bus: Target locations bus. + * + * Returns: < 0 on a fatal error + * 0 on success + * + * Remark: Wait to return until reply processed by the ISR. + */ +static int +mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io) +{ + MpiRaidActionRequest_t *pReq; + MPT_FRAME_HDR *mf; + int in_isr; + + in_isr = in_interrupt(); + if (in_isr) { + dprintk((MYIOC_s_WARN_FMT "Internal raid request not allowed in ISR context!\n", + hd->ioc->name)); + return -EPERM; + } + + /* Get and Populate a free Frame + */ + if ((mf = mpt_get_msg_frame(ScsiScanDvCtx, hd->ioc)) == NULL) { + ddvprintk((MYIOC_s_WARN_FMT "_do_raid: no msg frames!\n", + hd->ioc->name)); + return -EAGAIN; + } + pReq = (MpiRaidActionRequest_t *)mf; + pReq->Action = action; + pReq->Reserved1 = 0; + pReq->ChainOffset = 0; + pReq->Function = MPI_FUNCTION_RAID_ACTION; + pReq->VolumeID = io->id; + pReq->VolumeBus = io->bus; + pReq->PhysDiskNum = io->physDiskNum; + pReq->MsgFlags = 0; + pReq->Reserved2 = 0; + pReq->ActionDataWord = 0; /* Reserved for this action */ + //pReq->ActionDataSGE = 0; + + mpt_add_sge((char *)&pReq->ActionDataSGE, + MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1); + + ddvprintk((MYIOC_s_INFO_FMT "RAID Volume action %x id %d\n", + hd->ioc->name, action, io->id)); + + hd->pLocal = NULL; + hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */ + scandv_wait_done = 0; + + /* Save cmd pointer, for resource free if timeout or + * FW reload occurs + */ + hd->cmdPtr = mf; + + add_timer(&hd->timer); + mpt_put_msg_frame(ScsiScanDvCtx, hd->ioc, mf); + wait_event(scandv_waitq, scandv_wait_done); + + if ((hd->pLocal == NULL) || (hd->pLocal->completion != MPT_SCANDV_GOOD)) + return -1; + + return 0; +} +#endif /* ~MPTSCSIH_ENABLE_DOMAIN_VALIDATION */ + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_do_cmd - Do internal command. + * @hd: MPT_SCSI_HOST pointer + * @io: INTERNAL_CMD pointer. + * + * Issue the specified internally generated command and do command + * specific cleanup. For bus scan / DV only. + * NOTES: If command is Inquiry and status is good, + * initialize a target structure, save the data + * + * Remark: Single threaded access only. + * + * Return: + * < 0 if an illegal command or no resources + * + * 0 if good + * + * > 0 if command complete but some type of completion error. + */ +static int +mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io) +{ + MPT_FRAME_HDR *mf; + SCSIIORequest_t *pScsiReq; + SCSIIORequest_t ReqCopy; + int my_idx, ii, dir; + int rc, cmdTimeout; + int in_isr; + char cmdLen; + char CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}; + char cmd = io->cmd; + + in_isr = in_interrupt(); + if (in_isr) { + dprintk((MYIOC_s_WARN_FMT "Internal SCSI IO request not allowed in ISR context!\n", + hd->ioc->name)); + return -EPERM; + } + + + /* Set command specific information + */ + switch (cmd) { + case INQUIRY: + cmdLen = 6; + dir = MPI_SCSIIO_CONTROL_READ; + CDB[0] = cmd; + CDB[4] = io->size; + cmdTimeout = 10; + break; + + case TEST_UNIT_READY: + cmdLen = 6; + dir = MPI_SCSIIO_CONTROL_READ; + cmdTimeout = 10; + break; + + case START_STOP: + cmdLen = 6; + dir = MPI_SCSIIO_CONTROL_READ; + CDB[0] = cmd; + CDB[4] = 1; /*Spin up the disk */ + cmdTimeout = 15; + break; + + case REQUEST_SENSE: + cmdLen = 6; + CDB[0] = cmd; + CDB[4] = io->size; + dir = MPI_SCSIIO_CONTROL_READ; + cmdTimeout = 10; + break; + + case READ_BUFFER: + cmdLen = 10; + dir = MPI_SCSIIO_CONTROL_READ; + CDB[0] = cmd; + if (io->flags & MPT_ICFLAG_ECHO) { + CDB[1] = 0x0A; + } else { + CDB[1] = 0x02; + } + + if (io->flags & MPT_ICFLAG_BUF_CAP) { + CDB[1] |= 0x01; + } + CDB[6] = (io->size >> 16) & 0xFF; + CDB[7] = (io->size >> 8) & 0xFF; + CDB[8] = io->size & 0xFF; + cmdTimeout = 10; + break; + + case WRITE_BUFFER: + cmdLen = 10; + dir = MPI_SCSIIO_CONTROL_WRITE; + CDB[0] = cmd; + if (io->flags & MPT_ICFLAG_ECHO) { + CDB[1] = 0x0A; + } else { + CDB[1] = 0x02; + } + CDB[6] = (io->size >> 16) & 0xFF; + CDB[7] = (io->size >> 8) & 0xFF; + CDB[8] = io->size & 0xFF; + cmdTimeout = 10; + break; + + case RESERVE: + cmdLen = 6; + dir = MPI_SCSIIO_CONTROL_READ; + CDB[0] = cmd; + cmdTimeout = 10; + break; + + case RELEASE: + cmdLen = 6; + dir = MPI_SCSIIO_CONTROL_READ; + CDB[0] = cmd; + cmdTimeout = 10; + break; + + case SYNCHRONIZE_CACHE: + cmdLen = 10; + dir = MPI_SCSIIO_CONTROL_READ; + CDB[0] = cmd; +// CDB[1] = 0x02; /* set immediate bit */ + cmdTimeout = 10; + break; + + default: + /* Error Case */ + return -EFAULT; + } + + /* Get and Populate a free Frame + */ + if ((mf = mpt_get_msg_frame(ScsiScanDvCtx, hd->ioc)) == NULL) { + ddvprintk((MYIOC_s_WARN_FMT "No msg frames!\n", + hd->ioc->name)); + return -EBUSY; + } + + pScsiReq = (SCSIIORequest_t *) mf; + + /* Get the request index */ + my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); + ADD_INDEX_LOG(my_idx); /* for debug */ + + if (io->flags & MPT_ICFLAG_PHYS_DISK) { + pScsiReq->TargetID = io->physDiskNum; + pScsiReq->Bus = 0; + pScsiReq->ChainOffset = 0; + pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; + } else { + pScsiReq->TargetID = io->id; + pScsiReq->Bus = io->bus; + pScsiReq->ChainOffset = 0; + pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST; + } + + pScsiReq->CDBLength = cmdLen; + pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE; + + pScsiReq->Reserved = 0; + + pScsiReq->MsgFlags = mpt_msg_flags(); + /* MsgContext set in mpt_get_msg_fram call */ + + for (ii=0; ii < 8; ii++) + pScsiReq->LUN[ii] = 0; + pScsiReq->LUN[1] = io->lun; + + if (io->flags & MPT_ICFLAG_TAGGED_CMD) + pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ); + else + pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED); + + if (cmd == REQUEST_SENSE) { + pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED); + ddvprintk((MYIOC_s_INFO_FMT "Untagged! 0x%2x\n", + hd->ioc->name, cmd)); + } + + for (ii=0; ii < 16; ii++) + pScsiReq->CDB[ii] = CDB[ii]; + + pScsiReq->DataLength = cpu_to_le32(io->size); + pScsiReq->SenseBufferLowAddr = cpu_to_le32(hd->ioc->sense_buf_low_dma + + (my_idx * MPT_SENSE_BUFFER_ALLOC)); + + ddvprintk((MYIOC_s_INFO_FMT "Sending Command 0x%x for (%d:%d:%d)\n", + hd->ioc->name, cmd, io->bus, io->id, io->lun)); + + if (dir == MPI_SCSIIO_CONTROL_READ) { + mpt_add_sge((char *) &pScsiReq->SGL, + MPT_SGE_FLAGS_SSIMPLE_READ | io->size, + io->data_dma); + } else { + mpt_add_sge((char *) &pScsiReq->SGL, + MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size, + io->data_dma); + } + + /* The ISR will free the request frame, but we need + * the information to initialize the target. Duplicate. + */ + memcpy(&ReqCopy, pScsiReq, sizeof(SCSIIORequest_t)); + + /* Issue this command after: + * finish init + * add timer + * Wait until the reply has been received + * ScsiScanDvCtx callback function will + * set hd->pLocal; + * set scandv_wait_done and call wake_up + */ + hd->pLocal = NULL; + hd->timer.expires = jiffies + HZ*cmdTimeout; + scandv_wait_done = 0; + + /* Save cmd pointer, for resource free if timeout or + * FW reload occurs + */ + hd->cmdPtr = mf; + + add_timer(&hd->timer); + mpt_put_msg_frame(ScsiScanDvCtx, hd->ioc, mf); + wait_event(scandv_waitq, scandv_wait_done); + + if (hd->pLocal) { + rc = hd->pLocal->completion; + hd->pLocal->skip = 0; + + /* Always set fatal error codes in some cases. + */ + if (rc == MPT_SCANDV_SELECTION_TIMEOUT) + rc = -ENXIO; + else if (rc == MPT_SCANDV_SOME_ERROR) + rc = -rc; + } else { + rc = -EFAULT; + /* This should never happen. */ + ddvprintk((MYIOC_s_INFO_FMT "_do_cmd: Null pLocal!!!\n", + hd->ioc->name)); + } + + return rc; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks. + * @hd: Pointer to MPT_SCSI_HOST structure + * @portnum: IOC port number + * + * Uses the ISR, but with special processing. + * MUST be single-threaded. + * + * Return: 0 on completion + */ +static int +mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum) +{ + MPT_ADAPTER *ioc= hd->ioc; + VirtDevice *pTarget; + SCSIDevicePage1_t *pcfg1Data = NULL; + INTERNAL_CMD iocmd; + CONFIGPARMS cfg; + dma_addr_t cfg1_dma_addr = -1; + ConfigPageHeader_t header1; + int bus = 0; + int id = 0; + int lun; + int indexed_lun, lun_index; + int hostId = ioc->pfacts[portnum].PortSCSIID; + int max_id; + int requested, configuration, data; + int doConfig = 0; + u8 flags, factor; + + max_id = ioc->sh->max_id - 1; + + /* Following parameters will not change + * in this routine. + */ + iocmd.cmd = SYNCHRONIZE_CACHE; + iocmd.flags = 0; + iocmd.physDiskNum = -1; + iocmd.data = NULL; + iocmd.data_dma = -1; + iocmd.size = 0; + iocmd.rsvd = iocmd.rsvd2 = 0; + + /* No SCSI hosts + */ + if (hd->Targets == NULL) + return 0; + + /* Skip the host + */ + if (id == hostId) + id++; + + /* Write SDP1 for all SCSI devices + * Alloc memory and set up config buffer + */ + if (ioc->bus_type == SCSI) { + if (ioc->spi_data.sdp1length > 0) { + pcfg1Data = (SCSIDevicePage1_t *)pci_alloc_consistent(ioc->pcidev, + ioc->spi_data.sdp1length * 4, &cfg1_dma_addr); + + if (pcfg1Data != NULL) { + doConfig = 1; + header1.PageVersion = ioc->spi_data.sdp1version; + header1.PageLength = ioc->spi_data.sdp1length; + header1.PageNumber = 1; + header1.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; + cfg.hdr = &header1; + cfg.physAddr = cfg1_dma_addr; + cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; + cfg.dir = 1; + cfg.timeout = 0; + } + } + } + + /* loop through all devices on this port + */ + while (bus < MPT_MAX_BUS) { + iocmd.bus = bus; + iocmd.id = id; + pTarget = hd->Targets[(int)id]; + + if (doConfig) { + + /* Set the negotiation flags */ + if (pTarget && (pTarget = hd->Targets[id]) && !pTarget->raidVolume) { + flags = pTarget->negoFlags; + } else { + flags = hd->ioc->spi_data.noQas; + if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) { + data = hd->ioc->spi_data.nvram[id]; + + if (data & MPT_NVRAM_WIDE_DISABLE) + flags |= MPT_TARGET_NO_NEGO_WIDE; + + factor = (data & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT; + if ((factor == 0) || (factor == MPT_ASYNC)) + flags |= MPT_TARGET_NO_NEGO_SYNC; + } + } + + /* Force to async, narrow */ + mptscsih_setDevicePage1Flags(0, MPT_ASYNC, 0, &requested, + &configuration, flags); + dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC " + "offset=0 negoFlags=%x request=%x config=%x\n", + id, flags, requested, configuration)); + pcfg1Data->RequestedParameters = le32_to_cpu(requested); + pcfg1Data->Reserved = 0; + pcfg1Data->Configuration = le32_to_cpu(configuration); + cfg.pageAddr = (bus<<8) | id; + mpt_config(hd->ioc, &cfg); + } + + /* If target Ptr NULL or if this target is NOT a disk, skip. + */ + if ((pTarget) && (pTarget->tflags & MPT_TARGET_FLAGS_Q_YES)){ + for (lun=0; lun <= MPT_LAST_LUN; lun++) { + /* If LUN present, issue the command + */ + lun_index = (lun >> 5); /* 32 luns per lun_index */ + indexed_lun = (lun % 32); + if (pTarget->luns[lun_index] & (1<<indexed_lun)) { + iocmd.lun = lun; + (void) mptscsih_do_cmd(hd, &iocmd); + } + } + } + + /* get next relevant device */ + id++; + + if (id == hostId) + id++; + + if (id > max_id) { + id = 0; + bus++; + } + } + + if (pcfg1Data) { + pci_free_consistent(ioc->pcidev, header1.PageLength * 4, pcfg1Data, cfg1_dma_addr); + } + + return 0; +} + +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_domainValidation - Top level handler for domain validation. + * @hd: Pointer to MPT_SCSI_HOST structure. + * + * Uses the ISR, but with special processing. + * Called from schedule, should not be in interrupt mode. + * While thread alive, do dv for all devices needing dv + * + * Return: None. + */ +static void +mptscsih_domainValidation(void *arg) +{ + MPT_SCSI_HOST *hd; + MPT_ADAPTER *ioc; + unsigned long flags; + int id, maxid, dvStatus, did; + int ii, isPhysDisk; + + spin_lock_irqsave(&dvtaskQ_lock, flags); + dvtaskQ_active = 1; + if (dvtaskQ_release) { + dvtaskQ_active = 0; + spin_unlock_irqrestore(&dvtaskQ_lock, flags); + return; + } + spin_unlock_irqrestore(&dvtaskQ_lock, flags); + + /* For this ioc, loop through all devices and do dv to each device. + * When complete with this ioc, search through the ioc list, and + * for each scsi ioc found, do dv for all devices. Exit when no + * device needs dv. + */ + did = 1; + while (did) { + did = 0; + list_for_each_entry(ioc, &ioc_list, list) { + spin_lock_irqsave(&dvtaskQ_lock, flags); + if (dvtaskQ_release) { + dvtaskQ_active = 0; + spin_unlock_irqrestore(&dvtaskQ_lock, flags); + return; + } + spin_unlock_irqrestore(&dvtaskQ_lock, flags); + + msleep(250); + + /* DV only to SCSI adapters */ + if (ioc->bus_type != SCSI) + continue; + + /* Make sure everything looks ok */ + if (ioc->sh == NULL) + continue; + + hd = (MPT_SCSI_HOST *) ioc->sh->hostdata; + if (hd == NULL) + continue; + + if ((ioc->spi_data.forceDv & MPT_SCSICFG_RELOAD_IOC_PG3) != 0) { + mpt_read_ioc_pg_3(ioc); + if (ioc->spi_data.pIocPg3) { + Ioc3PhysDisk_t *pPDisk = ioc->spi_data.pIocPg3->PhysDisk; + int numPDisk = ioc->spi_data.pIocPg3->NumPhysDisks; + + while (numPDisk) { + if (ioc->spi_data.dvStatus[pPDisk->PhysDiskID] & MPT_SCSICFG_DV_NOT_DONE) + ioc->spi_data.dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV; + + pPDisk++; + numPDisk--; + } + } + ioc->spi_data.forceDv &= ~MPT_SCSICFG_RELOAD_IOC_PG3; + } + + maxid = min_t(int, ioc->sh->max_id, MPT_MAX_SCSI_DEVICES); + + for (id = 0; id < maxid; id++) { + spin_lock_irqsave(&dvtaskQ_lock, flags); + if (dvtaskQ_release) { + dvtaskQ_active = 0; + spin_unlock_irqrestore(&dvtaskQ_lock, flags); + return; + } + spin_unlock_irqrestore(&dvtaskQ_lock, flags); + dvStatus = hd->ioc->spi_data.dvStatus[id]; + + if (dvStatus & MPT_SCSICFG_NEED_DV) { + did++; + hd->ioc->spi_data.dvStatus[id] |= MPT_SCSICFG_DV_PENDING; + hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_NEED_DV; + + msleep(250); + + /* If hidden phys disk, block IO's to all + * raid volumes + * else, process normally + */ + isPhysDisk = mptscsih_is_phys_disk(ioc, id); + if (isPhysDisk) { + for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { + if (hd->ioc->spi_data.isRaid & (1 << ii)) { + hd->ioc->spi_data.dvStatus[ii] |= MPT_SCSICFG_DV_PENDING; + } + } + } + + if (mptscsih_doDv(hd, 0, id) == 1) { + /* Untagged device was busy, try again + */ + hd->ioc->spi_data.dvStatus[id] |= MPT_SCSICFG_NEED_DV; + hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_DV_PENDING; + } else { + /* DV is complete. Clear flags. + */ + hd->ioc->spi_data.dvStatus[id] &= ~(MPT_SCSICFG_DV_NOT_DONE | MPT_SCSICFG_DV_PENDING); + } + + if (isPhysDisk) { + for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { + if (hd->ioc->spi_data.isRaid & (1 << ii)) { + hd->ioc->spi_data.dvStatus[ii] &= ~MPT_SCSICFG_DV_PENDING; + } + } + } + + if (hd->ioc->spi_data.noQas) + mptscsih_qas_check(hd, id); + } + } + } + } + + spin_lock_irqsave(&dvtaskQ_lock, flags); + dvtaskQ_active = 0; + spin_unlock_irqrestore(&dvtaskQ_lock, flags); + + return; +} + +/* Search IOC page 3 to determine if this is hidden physical disk + */ +static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id) +{ + if (ioc->spi_data.pIocPg3) { + Ioc3PhysDisk_t *pPDisk = ioc->spi_data.pIocPg3->PhysDisk; + int numPDisk = ioc->spi_data.pIocPg3->NumPhysDisks; + + while (numPDisk) { + if (pPDisk->PhysDiskID == id) { + return 1; + } + pPDisk++; + numPDisk--; + } + } + return 0; +} + +/* Write SDP1 if no QAS has been enabled + */ +static void mptscsih_qas_check(MPT_SCSI_HOST *hd, int id) +{ + VirtDevice *pTarget; + int ii; + + if (hd->Targets == NULL) + return; + + for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { + if (ii == id) + continue; + + if ((hd->ioc->spi_data.dvStatus[ii] & MPT_SCSICFG_DV_NOT_DONE) != 0) + continue; + + pTarget = hd->Targets[ii]; + + if ((pTarget != NULL) && (!pTarget->raidVolume)) { + if ((pTarget->negoFlags & hd->ioc->spi_data.noQas) == 0) { + pTarget->negoFlags |= hd->ioc->spi_data.noQas; + dnegoprintk(("writeSDP1: id=%d flags=0\n", id)); + mptscsih_writeSDP1(hd, 0, ii, 0); + } + } else { + if (mptscsih_is_phys_disk(hd->ioc, ii) == 1) { + dnegoprintk(("writeSDP1: id=%d SCSICFG_USE_NVRAM\n", id)); + mptscsih_writeSDP1(hd, 0, ii, MPT_SCSICFG_USE_NVRAM); + } + } + } + return; +} + + + +#define MPT_GET_NVRAM_VALS 0x01 +#define MPT_UPDATE_MAX 0x02 +#define MPT_SET_MAX 0x04 +#define MPT_SET_MIN 0x08 +#define MPT_FALLBACK 0x10 +#define MPT_SAVE 0x20 + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_doDv - Perform domain validation to a target. + * @hd: Pointer to MPT_SCSI_HOST structure. + * @portnum: IOC port number. + * @target: Physical ID of this target + * + * Uses the ISR, but with special processing. + * MUST be single-threaded. + * Test will exit if target is at async & narrow. + * + * Return: None. + */ +static int +mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) +{ + MPT_ADAPTER *ioc = hd->ioc; + VirtDevice *pTarget; + SCSIDevicePage1_t *pcfg1Data; + SCSIDevicePage0_t *pcfg0Data; + u8 *pbuf1; + u8 *pbuf2; + u8 *pDvBuf; + dma_addr_t dvbuf_dma = -1; + dma_addr_t buf1_dma = -1; + dma_addr_t buf2_dma = -1; + dma_addr_t cfg1_dma_addr = -1; + dma_addr_t cfg0_dma_addr = -1; + ConfigPageHeader_t header1; + ConfigPageHeader_t header0; + DVPARAMETERS dv; + INTERNAL_CMD iocmd; + CONFIGPARMS cfg; + int dv_alloc = 0; + int rc, sz = 0; + int bufsize = 0; + int dataBufSize = 0; + int echoBufSize = 0; + int notDone; + int patt; + int repeat; + int retcode = 0; + int nfactor = MPT_ULTRA320; + char firstPass = 1; + char doFallback = 0; + char readPage0; + char bus, lun; + char inq0 = 0; + + if (ioc->spi_data.sdp1length == 0) + return 0; + + if (ioc->spi_data.sdp0length == 0) + return 0; + + /* If multiple buses are used, require that the initiator + * id be the same on all buses. + */ + if (id == ioc->pfacts[0].PortSCSIID) + return 0; + + lun = 0; + bus = (u8) bus_number; + ddvtprintk((MYIOC_s_NOTE_FMT + "DV started: bus=%d, id=%d dv @ %p\n", + ioc->name, bus, id, &dv)); + + /* Prep DV structure + */ + memset (&dv, 0, sizeof(DVPARAMETERS)); + dv.id = id; + + /* Populate tmax with the current maximum + * transfer parameters for this target. + * Exit if narrow and async. + */ + dv.cmd = MPT_GET_NVRAM_VALS; + mptscsih_dv_parms(hd, &dv, NULL); + + /* Prep SCSI IO structure + */ + iocmd.id = id; + iocmd.bus = bus; + iocmd.lun = lun; + iocmd.flags = 0; + iocmd.physDiskNum = -1; + iocmd.rsvd = iocmd.rsvd2 = 0; + + pTarget = hd->Targets[id]; + + /* Use tagged commands if possible. + */ + if (pTarget) { + if (pTarget->tflags & MPT_TARGET_FLAGS_Q_YES) + iocmd.flags |= MPT_ICFLAG_TAGGED_CMD; + else { + if (hd->ioc->facts.FWVersion.Word < 0x01000600) + return 0; + + if ((hd->ioc->facts.FWVersion.Word >= 0x01010000) && + (hd->ioc->facts.FWVersion.Word < 0x01010B00)) + return 0; + } + } + + /* Prep cfg structure + */ + cfg.pageAddr = (bus<<8) | id; + cfg.hdr = NULL; + + /* Prep SDP0 header + */ + header0.PageVersion = ioc->spi_data.sdp0version; + header0.PageLength = ioc->spi_data.sdp0length; + header0.PageNumber = 0; + header0.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; + + /* Prep SDP1 header + */ + header1.PageVersion = ioc->spi_data.sdp1version; + header1.PageLength = ioc->spi_data.sdp1length; + header1.PageNumber = 1; + header1.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; + + if (header0.PageLength & 1) + dv_alloc = (header0.PageLength * 4) + 4; + + dv_alloc += (2048 + (header1.PageLength * 4)); + + pDvBuf = pci_alloc_consistent(ioc->pcidev, dv_alloc, &dvbuf_dma); + if (pDvBuf == NULL) + return 0; + + sz = 0; + pbuf1 = (u8 *)pDvBuf; + buf1_dma = dvbuf_dma; + sz +=1024; + + pbuf2 = (u8 *) (pDvBuf + sz); + buf2_dma = dvbuf_dma + sz; + sz +=1024; + + pcfg0Data = (SCSIDevicePage0_t *) (pDvBuf + sz); + cfg0_dma_addr = dvbuf_dma + sz; + sz += header0.PageLength * 4; + + /* 8-byte alignment + */ + if (header0.PageLength & 1) + sz += 4; + + pcfg1Data = (SCSIDevicePage1_t *) (pDvBuf + sz); + cfg1_dma_addr = dvbuf_dma + sz; + + /* Skip this ID? Set cfg.hdr to force config page write + */ + { + ScsiCfgData *pspi_data = &hd->ioc->spi_data; + if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) { + /* Set the factor from nvram */ + nfactor = (pspi_data->nvram[id] & MPT_NVRAM_SYNC_MASK) >> 8; + if (nfactor < pspi_data->minSyncFactor ) + nfactor = pspi_data->minSyncFactor; + + if (!(pspi_data->nvram[id] & MPT_NVRAM_ID_SCAN_ENABLE) || + (pspi_data->PortFlags == MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV) ) { + + ddvprintk((MYIOC_s_NOTE_FMT "DV Skipped: bus, id, lun (%d, %d, %d)\n", + ioc->name, bus, id, lun)); + + dv.cmd = MPT_SET_MAX; + mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data); + cfg.hdr = &header1; + + /* Save the final negotiated settings to + * SCSI device page 1. + */ + cfg.physAddr = cfg1_dma_addr; + cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; + cfg.dir = 1; + mpt_config(hd->ioc, &cfg); + goto target_done; + } + } + } + + /* Finish iocmd inititialization - hidden or visible disk? */ + if (ioc->spi_data.pIocPg3) { + /* Search IOC page 3 for matching id + */ + Ioc3PhysDisk_t *pPDisk = ioc->spi_data.pIocPg3->PhysDisk; + int numPDisk = ioc->spi_data.pIocPg3->NumPhysDisks; + + while (numPDisk) { + if (pPDisk->PhysDiskID == id) { + /* match */ + iocmd.flags |= MPT_ICFLAG_PHYS_DISK; + iocmd.physDiskNum = pPDisk->PhysDiskNum; + + /* Quiesce the IM + */ + if (mptscsih_do_raid(hd, MPI_RAID_ACTION_QUIESCE_PHYS_IO, &iocmd) < 0) { + ddvprintk((MYIOC_s_ERR_FMT "RAID Queisce FAILED!\n", ioc->name)); + goto target_done; + } + break; + } + pPDisk++; + numPDisk--; + } + } + + /* RAID Volume ID's may double for a physical device. If RAID but + * not a physical ID as well, skip DV. + */ + if ((hd->ioc->spi_data.isRaid & (1 << id)) && !(iocmd.flags & MPT_ICFLAG_PHYS_DISK)) + goto target_done; + + + /* Basic Test. + * Async & Narrow - Inquiry + * Async & Narrow - Inquiry + * Maximum transfer rate - Inquiry + * Compare buffers: + * If compare, test complete. + * If miscompare and first pass, repeat + * If miscompare and not first pass, fall back and repeat + */ + hd->pLocal = NULL; + readPage0 = 0; + sz = SCSI_MAX_INQUIRY_BYTES; + rc = MPT_SCANDV_GOOD; + while (1) { + ddvprintk((MYIOC_s_NOTE_FMT "DV: Start Basic test on id=%d\n", ioc->name, id)); + retcode = 0; + dv.cmd = MPT_SET_MIN; + mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data); + + cfg.hdr = &header1; + cfg.physAddr = cfg1_dma_addr; + cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; + cfg.dir = 1; + if (mpt_config(hd->ioc, &cfg) != 0) + goto target_done; + + /* Wide - narrow - wide workaround case + */ + if ((rc == MPT_SCANDV_ISSUE_SENSE) && dv.max.width) { + /* Send an untagged command to reset disk Qs corrupted + * when a parity error occurs on a Request Sense. + */ + if ((hd->ioc->facts.FWVersion.Word >= 0x01000600) || + ((hd->ioc->facts.FWVersion.Word >= 0x01010000) && + (hd->ioc->facts.FWVersion.Word < 0x01010B00)) ) { + + iocmd.cmd = REQUEST_SENSE; + iocmd.data_dma = buf1_dma; + iocmd.data = pbuf1; + iocmd.size = 0x12; + if (mptscsih_do_cmd(hd, &iocmd) < 0) + goto target_done; + else { + if (hd->pLocal == NULL) + goto target_done; + rc = hd->pLocal->completion; + if ((rc == MPT_SCANDV_GOOD) || (rc == MPT_SCANDV_SENSE)) { + dv.max.width = 0; + doFallback = 0; + } else + goto target_done; + } + } else + goto target_done; + } + + iocmd.cmd = INQUIRY; + iocmd.data_dma = buf1_dma; + iocmd.data = pbuf1; + iocmd.size = sz; + memset(pbuf1, 0x00, sz); + if (mptscsih_do_cmd(hd, &iocmd) < 0) + goto target_done; + else { + if (hd->pLocal == NULL) + goto target_done; + rc = hd->pLocal->completion; + if (rc == MPT_SCANDV_GOOD) { + if (hd->pLocal->scsiStatus == SAM_STAT_BUSY) { + if ((iocmd.flags & MPT_ICFLAG_TAGGED_CMD) == 0) + retcode = 1; + else + retcode = 0; + + goto target_done; + } + } else if (rc == MPT_SCANDV_SENSE) { + ; + } else { + /* If first command doesn't complete + * with a good status or with a check condition, + * exit. + */ + goto target_done; + } + } + + /* Reset the size for disks + */ + inq0 = (*pbuf1) & 0x1F; + if ((inq0 == 0) && pTarget && !pTarget->raidVolume) { + sz = 0x40; + iocmd.size = sz; + } + + /* Another GEM workaround. Check peripheral device type, + * if PROCESSOR, quit DV. + */ + if (inq0 == TYPE_PROCESSOR) { + mptscsih_initTarget(hd, + bus, + id, + lun, + pbuf1, + sz); + goto target_done; + } + + if (inq0 > 0x08) + goto target_done; + + if (mptscsih_do_cmd(hd, &iocmd) < 0) + goto target_done; + + if (sz == 0x40) { + if ((pTarget->maxWidth == 1) && (pTarget->maxOffset) && (nfactor < 0x0A) + && (pTarget->minSyncFactor > 0x09)) { + if ((pbuf1[56] & 0x04) == 0) + ; + else if ((pbuf1[56] & 0x01) == 1) { + pTarget->minSyncFactor = + nfactor > MPT_ULTRA320 ? nfactor : MPT_ULTRA320; + } else { + pTarget->minSyncFactor = + nfactor > MPT_ULTRA160 ? nfactor : MPT_ULTRA160; + } + + dv.max.factor = pTarget->minSyncFactor; + + if ((pbuf1[56] & 0x02) == 0) { + pTarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS; + hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS; + ddvprintk((MYIOC_s_NOTE_FMT + "DV: Start Basic noQas on id=%d due to pbuf1[56]=%x\n", + ioc->name, id, pbuf1[56])); + } + } + } + + if (doFallback) + dv.cmd = MPT_FALLBACK; + else + dv.cmd = MPT_SET_MAX; + + mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data); + if (mpt_config(hd->ioc, &cfg) != 0) + goto target_done; + + if ((!dv.now.width) && (!dv.now.offset)) + goto target_done; + + iocmd.cmd = INQUIRY; + iocmd.data_dma = buf2_dma; + iocmd.data = pbuf2; + iocmd.size = sz; + memset(pbuf2, 0x00, sz); + if (mptscsih_do_cmd(hd, &iocmd) < 0) + goto target_done; + else if (hd->pLocal == NULL) + goto target_done; + else { + /* Save the return code. + * If this is the first pass, + * read SCSI Device Page 0 + * and update the target max parameters. + */ + rc = hd->pLocal->completion; + doFallback = 0; + if (rc == MPT_SCANDV_GOOD) { + if (!readPage0) { + u32 sdp0_info; + u32 sdp0_nego; + + cfg.hdr = &header0; + cfg.physAddr = cfg0_dma_addr; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + cfg.dir = 0; + + if (mpt_config(hd->ioc, &cfg) != 0) + goto target_done; + + sdp0_info = le32_to_cpu(pcfg0Data->Information) & 0x0E; + sdp0_nego = (le32_to_cpu(pcfg0Data->NegotiatedParameters) & 0xFF00 ) >> 8; + + /* Quantum and Fujitsu workarounds. + * Quantum: PPR U320 -> PPR reply with Ultra2 and wide + * Fujitsu: PPR U320 -> Msg Reject and Ultra2 and wide + * Resetart with a request for U160. + */ + if ((dv.now.factor == MPT_ULTRA320) && (sdp0_nego == MPT_ULTRA2)) { + doFallback = 1; + } else { + dv.cmd = MPT_UPDATE_MAX; + mptscsih_dv_parms(hd, &dv, (void *)pcfg0Data); + /* Update the SCSI device page 1 area + */ + pcfg1Data->RequestedParameters = pcfg0Data->NegotiatedParameters; + readPage0 = 1; + } + } + + /* Quantum workaround. Restart this test will the fallback + * flag set. + */ + if (doFallback == 0) { + if (memcmp(pbuf1, pbuf2, sz) != 0) { + if (!firstPass) + doFallback = 1; + } else { + ddvprintk((MYIOC_s_NOTE_FMT + "DV:Inquiry compared id=%d, calling initTarget\n", ioc->name, id)); + hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_DV_NOT_DONE; + mptscsih_initTarget(hd, + bus, + id, + lun, + pbuf1, + sz); + break; /* test complete */ + } + } + + + } else if (rc == MPT_SCANDV_ISSUE_SENSE) + doFallback = 1; /* set fallback flag */ + else if ((rc == MPT_SCANDV_DID_RESET) || + (rc == MPT_SCANDV_SENSE) || + (rc == MPT_SCANDV_FALLBACK)) + doFallback = 1; /* set fallback flag */ + else + goto target_done; + + firstPass = 0; + } + } + ddvprintk((MYIOC_s_NOTE_FMT "DV: Basic test on id=%d completed OK.\n", ioc->name, id)); + + if (mpt_dv == 0) + goto target_done; + + inq0 = (*pbuf1) & 0x1F; + + /* Continue only for disks + */ + if (inq0 != 0) + goto target_done; + + if ( ioc->spi_data.PortFlags == MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY ) + goto target_done; + + /* Start the Enhanced Test. + * 0) issue TUR to clear out check conditions + * 1) read capacity of echo (regular) buffer + * 2) reserve device + * 3) do write-read-compare data pattern test + * 4) release + * 5) update nego parms to target struct + */ + cfg.hdr = &header1; + cfg.physAddr = cfg1_dma_addr; + cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; + cfg.dir = 1; + + iocmd.cmd = TEST_UNIT_READY; + iocmd.data_dma = -1; + iocmd.data = NULL; + iocmd.size = 0; + notDone = 1; + while (notDone) { + if (mptscsih_do_cmd(hd, &iocmd) < 0) + goto target_done; + + if (hd->pLocal == NULL) + goto target_done; + + rc = hd->pLocal->completion; + if (rc == MPT_SCANDV_GOOD) + notDone = 0; + else if (rc == MPT_SCANDV_SENSE) { + u8 skey = hd->pLocal->sense[2] & 0x0F; + u8 asc = hd->pLocal->sense[12]; + u8 ascq = hd->pLocal->sense[13]; + ddvprintk((MYIOC_s_INFO_FMT + "SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n", + ioc->name, skey, asc, ascq)); + + if (skey == UNIT_ATTENTION) + notDone++; /* repeat */ + else if ((skey == NOT_READY) && + (asc == 0x04)&&(ascq == 0x01)) { + /* wait then repeat */ + mdelay (2000); + notDone++; + } else if ((skey == NOT_READY) && (asc == 0x3A)) { + /* no medium, try read test anyway */ + notDone = 0; + } else { + /* All other errors are fatal. + */ + ddvprintk((MYIOC_s_INFO_FMT "DV: fatal error.", + ioc->name)); + goto target_done; + } + } else + goto target_done; + } + + iocmd.cmd = READ_BUFFER; + iocmd.data_dma = buf1_dma; + iocmd.data = pbuf1; + iocmd.size = 4; + iocmd.flags |= MPT_ICFLAG_BUF_CAP; + + dataBufSize = 0; + echoBufSize = 0; + for (patt = 0; patt < 2; patt++) { + if (patt == 0) + iocmd.flags |= MPT_ICFLAG_ECHO; + else + iocmd.flags &= ~MPT_ICFLAG_ECHO; + + notDone = 1; + while (notDone) { + bufsize = 0; + + /* If not ready after 8 trials, + * give up on this device. + */ + if (notDone > 8) + goto target_done; + + if (mptscsih_do_cmd(hd, &iocmd) < 0) + goto target_done; + else if (hd->pLocal == NULL) + goto target_done; + else { + rc = hd->pLocal->completion; + ddvprintk(("ReadBuffer Comp Code %d", rc)); + ddvprintk((" buff: %0x %0x %0x %0x\n", + pbuf1[0], pbuf1[1], pbuf1[2], pbuf1[3])); + + if (rc == MPT_SCANDV_GOOD) { + notDone = 0; + if (iocmd.flags & MPT_ICFLAG_ECHO) { + bufsize = ((pbuf1[2] & 0x1F) <<8) | pbuf1[3]; + } else { + bufsize = pbuf1[1]<<16 | pbuf1[2]<<8 | pbuf1[3]; + } + } else if (rc == MPT_SCANDV_SENSE) { + u8 skey = hd->pLocal->sense[2] & 0x0F; + u8 asc = hd->pLocal->sense[12]; + u8 ascq = hd->pLocal->sense[13]; + ddvprintk((MYIOC_s_INFO_FMT + "SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n", + ioc->name, skey, asc, ascq)); + if (skey == ILLEGAL_REQUEST) { + notDone = 0; + } else if (skey == UNIT_ATTENTION) { + notDone++; /* repeat */ + } else if ((skey == NOT_READY) && + (asc == 0x04)&&(ascq == 0x01)) { + /* wait then repeat */ + mdelay (2000); + notDone++; + } else { + /* All other errors are fatal. + */ + ddvprintk((MYIOC_s_INFO_FMT "DV: fatal error.", + ioc->name)); + goto target_done; + } + } else { + /* All other errors are fatal + */ + goto target_done; + } + } + } + + if (iocmd.flags & MPT_ICFLAG_ECHO) + echoBufSize = bufsize; + else + dataBufSize = bufsize; + } + sz = 0; + iocmd.flags &= ~MPT_ICFLAG_BUF_CAP; + + /* Use echo buffers if possible, + * Exit if both buffers are 0. + */ + if (echoBufSize > 0) { + iocmd.flags |= MPT_ICFLAG_ECHO; + if (dataBufSize > 0) + bufsize = min(echoBufSize, dataBufSize); + else + bufsize = echoBufSize; + } else if (dataBufSize == 0) + goto target_done; + + ddvprintk((MYIOC_s_INFO_FMT "%s Buffer Capacity %d\n", ioc->name, + (iocmd.flags & MPT_ICFLAG_ECHO) ? "Echo" : " ", bufsize)); + + /* Data buffers for write-read-compare test max 1K. + */ + sz = min(bufsize, 1024); + + /* --- loop ---- + * On first pass, always issue a reserve. + * On additional loops, only if a reset has occurred. + * iocmd.flags indicates if echo or regular buffer + */ + for (patt = 0; patt < 4; patt++) { + ddvprintk(("Pattern %d\n", patt)); + if ((iocmd.flags & MPT_ICFLAG_RESERVED) && (iocmd.flags & MPT_ICFLAG_DID_RESET)) { + iocmd.cmd = TEST_UNIT_READY; + iocmd.data_dma = -1; + iocmd.data = NULL; + iocmd.size = 0; + if (mptscsih_do_cmd(hd, &iocmd) < 0) + goto target_done; + + iocmd.cmd = RELEASE; + iocmd.data_dma = -1; + iocmd.data = NULL; + iocmd.size = 0; + if (mptscsih_do_cmd(hd, &iocmd) < 0) + goto target_done; + else if (hd->pLocal == NULL) + goto target_done; + else { + rc = hd->pLocal->completion; + ddvprintk(("Release rc %d\n", rc)); + if (rc == MPT_SCANDV_GOOD) + iocmd.flags &= ~MPT_ICFLAG_RESERVED; + else + goto target_done; + } + iocmd.flags &= ~MPT_ICFLAG_RESERVED; + } + iocmd.flags &= ~MPT_ICFLAG_DID_RESET; + + repeat = 5; + while (repeat && (!(iocmd.flags & MPT_ICFLAG_RESERVED))) { + iocmd.cmd = RESERVE; + iocmd.data_dma = -1; + iocmd.data = NULL; + iocmd.size = 0; + if (mptscsih_do_cmd(hd, &iocmd) < 0) + goto target_done; + else if (hd->pLocal == NULL) + goto target_done; + else { + rc = hd->pLocal->completion; + if (rc == MPT_SCANDV_GOOD) { + iocmd.flags |= MPT_ICFLAG_RESERVED; + } else if (rc == MPT_SCANDV_SENSE) { + /* Wait if coming ready + */ + u8 skey = hd->pLocal->sense[2] & 0x0F; + u8 asc = hd->pLocal->sense[12]; + u8 ascq = hd->pLocal->sense[13]; + ddvprintk((MYIOC_s_INFO_FMT + "DV: Reserve Failed: ", ioc->name)); + ddvprintk(("SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n", + skey, asc, ascq)); + + if ((skey == NOT_READY) && (asc == 0x04)&& + (ascq == 0x01)) { + /* wait then repeat */ + mdelay (2000); + notDone++; + } else { + ddvprintk((MYIOC_s_INFO_FMT + "DV: Reserved Failed.", ioc->name)); + goto target_done; + } + } else { + ddvprintk((MYIOC_s_INFO_FMT "DV: Reserved Failed.", + ioc->name)); + goto target_done; + } + } + } + + mptscsih_fillbuf(pbuf1, sz, patt, 1); + iocmd.cmd = WRITE_BUFFER; + iocmd.data_dma = buf1_dma; + iocmd.data = pbuf1; + iocmd.size = sz; + if (mptscsih_do_cmd(hd, &iocmd) < 0) + goto target_done; + else if (hd->pLocal == NULL) + goto target_done; + else { + rc = hd->pLocal->completion; + if (rc == MPT_SCANDV_GOOD) + ; /* Issue read buffer */ + else if (rc == MPT_SCANDV_DID_RESET) { + /* If using echo buffers, reset to data buffers. + * Else do Fallback and restart + * this test (re-issue reserve + * because of bus reset). + */ + if ((iocmd.flags & MPT_ICFLAG_ECHO) && (dataBufSize >= bufsize)) { + iocmd.flags &= ~MPT_ICFLAG_ECHO; + } else { + dv.cmd = MPT_FALLBACK; + mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data); + + if (mpt_config(hd->ioc, &cfg) != 0) + goto target_done; + + if ((!dv.now.width) && (!dv.now.offset)) + goto target_done; + } + + iocmd.flags |= MPT_ICFLAG_DID_RESET; + patt = -1; + continue; + } else if (rc == MPT_SCANDV_SENSE) { + /* Restart data test if UA, else quit. + */ + u8 skey = hd->pLocal->sense[2] & 0x0F; + ddvprintk((MYIOC_s_INFO_FMT + "SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n", ioc->name, skey, + hd->pLocal->sense[12], hd->pLocal->sense[13])); + if (skey == UNIT_ATTENTION) { + patt = -1; + continue; + } else if (skey == ILLEGAL_REQUEST) { + if (iocmd.flags & MPT_ICFLAG_ECHO) { + if (dataBufSize >= bufsize) { + iocmd.flags &= ~MPT_ICFLAG_ECHO; + patt = -1; + continue; + } + } + goto target_done; + } + else + goto target_done; + } else { + /* fatal error */ + goto target_done; + } + } + + iocmd.cmd = READ_BUFFER; + iocmd.data_dma = buf2_dma; + iocmd.data = pbuf2; + iocmd.size = sz; + if (mptscsih_do_cmd(hd, &iocmd) < 0) + goto target_done; + else if (hd->pLocal == NULL) + goto target_done; + else { + rc = hd->pLocal->completion; + if (rc == MPT_SCANDV_GOOD) { + /* If buffers compare, + * go to next pattern, + * else, do a fallback and restart + * data transfer test. + */ + if (memcmp (pbuf1, pbuf2, sz) == 0) { + ; /* goto next pattern */ + } else { + /* Miscompare with Echo buffer, go to data buffer, + * if that buffer exists. + * Miscompare with Data buffer, check first 4 bytes, + * some devices return capacity. Exit in this case. + */ + if (iocmd.flags & MPT_ICFLAG_ECHO) { + if (dataBufSize >= bufsize) + iocmd.flags &= ~MPT_ICFLAG_ECHO; + else + goto target_done; + } else { + if (dataBufSize == (pbuf2[1]<<16 | pbuf2[2]<<8 | pbuf2[3])) { + /* Argh. Device returning wrong data. + * Quit DV for this device. + */ + goto target_done; + } + + /* Had an actual miscompare. Slow down.*/ + dv.cmd = MPT_FALLBACK; + mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data); + + if (mpt_config(hd->ioc, &cfg) != 0) + goto target_done; + + if ((!dv.now.width) && (!dv.now.offset)) + goto target_done; + } + + patt = -1; + continue; + } + } else if (rc == MPT_SCANDV_DID_RESET) { + /* Do Fallback and restart + * this test (re-issue reserve + * because of bus reset). + */ + dv.cmd = MPT_FALLBACK; + mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data); + + if (mpt_config(hd->ioc, &cfg) != 0) + goto target_done; + + if ((!dv.now.width) && (!dv.now.offset)) + goto target_done; + + iocmd.flags |= MPT_ICFLAG_DID_RESET; + patt = -1; + continue; + } else if (rc == MPT_SCANDV_SENSE) { + /* Restart data test if UA, else quit. + */ + u8 skey = hd->pLocal->sense[2] & 0x0F; + ddvprintk((MYIOC_s_INFO_FMT + "SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n", ioc->name, skey, + hd->pLocal->sense[12], hd->pLocal->sense[13])); + if (skey == UNIT_ATTENTION) { + patt = -1; + continue; + } + else + goto target_done; + } else { + /* fatal error */ + goto target_done; + } + } + + } /* --- end of patt loop ---- */ + +target_done: + if (iocmd.flags & MPT_ICFLAG_RESERVED) { + iocmd.cmd = RELEASE; + iocmd.data_dma = -1; + iocmd.data = NULL; + iocmd.size = 0; + if (mptscsih_do_cmd(hd, &iocmd) < 0) + printk(MYIOC_s_INFO_FMT "DV: Release failed. id %d", + ioc->name, id); + else if (hd->pLocal) { + if (hd->pLocal->completion == MPT_SCANDV_GOOD) + iocmd.flags &= ~MPT_ICFLAG_RESERVED; + } else { + printk(MYIOC_s_INFO_FMT "DV: Release failed. id %d", + ioc->name, id); + } + } + + + /* Set if cfg1_dma_addr contents is valid + */ + if ((cfg.hdr != NULL) && (retcode == 0)){ + /* If disk, not U320, disable QAS + */ + if ((inq0 == 0) && (dv.now.factor > MPT_ULTRA320)) { + hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS; + ddvprintk((MYIOC_s_NOTE_FMT + "noQas set due to id=%d has factor=%x\n", ioc->name, id, dv.now.factor)); + } + + dv.cmd = MPT_SAVE; + mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data); + + /* Double writes to SDP1 can cause problems, + * skip save of the final negotiated settings to + * SCSI device page 1. + * + cfg.hdr = &header1; + cfg.physAddr = cfg1_dma_addr; + cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; + cfg.dir = 1; + mpt_config(hd->ioc, &cfg); + */ + } + + /* If this is a RAID Passthrough, enable internal IOs + */ + if (iocmd.flags & MPT_ICFLAG_PHYS_DISK) { + if (mptscsih_do_raid(hd, MPI_RAID_ACTION_ENABLE_PHYS_IO, &iocmd) < 0) + ddvprintk((MYIOC_s_ERR_FMT "RAID Enable FAILED!\n", ioc->name)); + } + + /* Done with the DV scan of the current target + */ + if (pDvBuf) + pci_free_consistent(ioc->pcidev, dv_alloc, pDvBuf, dvbuf_dma); + + ddvtprintk((MYIOC_s_INFO_FMT "DV Done id=%d\n", + ioc->name, id)); + + return retcode; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* mptscsih_dv_parms - perform a variety of operations on the + * parameters used for negotiation. + * @hd: Pointer to a SCSI host. + * @dv: Pointer to a structure that contains the maximum and current + * negotiated parameters. + */ +static void +mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage) +{ + VirtDevice *pTarget; + SCSIDevicePage0_t *pPage0; + SCSIDevicePage1_t *pPage1; + int val = 0, data, configuration; + u8 width = 0; + u8 offset = 0; + u8 factor = 0; + u8 negoFlags = 0; + u8 cmd = dv->cmd; + u8 id = dv->id; + + switch (cmd) { + case MPT_GET_NVRAM_VALS: + ddvprintk((MYIOC_s_NOTE_FMT "Getting NVRAM: ", + hd->ioc->name)); + /* Get the NVRAM values and save in tmax + * If not an LVD bus, the adapter minSyncFactor has been + * already throttled back. + */ + if ((hd->Targets)&&((pTarget = hd->Targets[(int)id]) != NULL) && !pTarget->raidVolume) { + width = pTarget->maxWidth; + offset = pTarget->maxOffset; + factor = pTarget->minSyncFactor; + negoFlags = pTarget->negoFlags; + } else { + if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) { + data = hd->ioc->spi_data.nvram[id]; + width = data & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; + if ((offset = hd->ioc->spi_data.maxSyncOffset) == 0) + factor = MPT_ASYNC; + else { + factor = (data & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT; + if ((factor == 0) || (factor == MPT_ASYNC)){ + factor = MPT_ASYNC; + offset = 0; + } + } + } else { + width = MPT_NARROW; + offset = 0; + factor = MPT_ASYNC; + } + + /* Set the negotiation flags */ + negoFlags = hd->ioc->spi_data.noQas; + if (!width) + negoFlags |= MPT_TARGET_NO_NEGO_WIDE; + + if (!offset) + negoFlags |= MPT_TARGET_NO_NEGO_SYNC; + } + + /* limit by adapter capabilities */ + width = min(width, hd->ioc->spi_data.maxBusWidth); + offset = min(offset, hd->ioc->spi_data.maxSyncOffset); + factor = max(factor, hd->ioc->spi_data.minSyncFactor); + + /* Check Consistency */ + if (offset && (factor < MPT_ULTRA2) && !width) + factor = MPT_ULTRA2; + + dv->max.width = width; + dv->max.offset = offset; + dv->max.factor = factor; + dv->max.flags = negoFlags; + ddvprintk((" id=%d width=%d factor=%x offset=%x flags=%x\n", + id, width, factor, offset, negoFlags)); + break; + + case MPT_UPDATE_MAX: + ddvprintk((MYIOC_s_NOTE_FMT + "Updating with SDP0 Data: ", hd->ioc->name)); + /* Update tmax values with those from Device Page 0.*/ + pPage0 = (SCSIDevicePage0_t *) pPage; + if (pPage0) { + val = cpu_to_le32(pPage0->NegotiatedParameters); + dv->max.width = val & MPI_SCSIDEVPAGE0_NP_WIDE ? 1 : 0; + dv->max.offset = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> 16; + dv->max.factor = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8; + } + + dv->now.width = dv->max.width; + dv->now.offset = dv->max.offset; + dv->now.factor = dv->max.factor; + ddvprintk(("id=%d width=%d factor=%x offset=%x flags=%x\n", + id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags)); + break; + + case MPT_SET_MAX: + ddvprintk((MYIOC_s_NOTE_FMT "Setting Max: ", + hd->ioc->name)); + /* Set current to the max values. Update the config page.*/ + dv->now.width = dv->max.width; + dv->now.offset = dv->max.offset; + dv->now.factor = dv->max.factor; + dv->now.flags = dv->max.flags; + + pPage1 = (SCSIDevicePage1_t *)pPage; + if (pPage1) { + mptscsih_setDevicePage1Flags (dv->now.width, dv->now.factor, + dv->now.offset, &val, &configuration, dv->now.flags); + dnegoprintk(("Setting Max: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n", + id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration)); + pPage1->RequestedParameters = le32_to_cpu(val); + pPage1->Reserved = 0; + pPage1->Configuration = le32_to_cpu(configuration); + } + + ddvprintk(("id=%d width=%d factor=%x offset=%x flags=%x request=%x configuration=%x\n", + id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration)); + break; + + case MPT_SET_MIN: + ddvprintk((MYIOC_s_NOTE_FMT "Setting Min: ", + hd->ioc->name)); + /* Set page to asynchronous and narrow + * Do not update now, breaks fallback routine. */ + width = MPT_NARROW; + offset = 0; + factor = MPT_ASYNC; + negoFlags = dv->max.flags; + + pPage1 = (SCSIDevicePage1_t *)pPage; + if (pPage1) { + mptscsih_setDevicePage1Flags (width, factor, + offset, &val, &configuration, negoFlags); + dnegoprintk(("Setting Min: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n", + id, width, factor, offset, negoFlags, val, configuration)); + pPage1->RequestedParameters = le32_to_cpu(val); + pPage1->Reserved = 0; + pPage1->Configuration = le32_to_cpu(configuration); + } + ddvprintk(("id=%d width=%d factor=%x offset=%x request=%x config=%x negoFlags=%x\n", + id, width, factor, offset, val, configuration, negoFlags)); + break; + + case MPT_FALLBACK: + ddvprintk((MYIOC_s_NOTE_FMT + "Fallback: Start: offset %d, factor %x, width %d \n", + hd->ioc->name, dv->now.offset, + dv->now.factor, dv->now.width)); + width = dv->now.width; + offset = dv->now.offset; + factor = dv->now.factor; + if ((offset) && (dv->max.width)) { + if (factor < MPT_ULTRA160) + factor = MPT_ULTRA160; + else if (factor < MPT_ULTRA2) { + factor = MPT_ULTRA2; + width = MPT_WIDE; + } else if ((factor == MPT_ULTRA2) && width) { + factor = MPT_ULTRA2; + width = MPT_NARROW; + } else if (factor < MPT_ULTRA) { + factor = MPT_ULTRA; + width = MPT_WIDE; + } else if ((factor == MPT_ULTRA) && width) { + width = MPT_NARROW; + } else if (factor < MPT_FAST) { + factor = MPT_FAST; + width = MPT_WIDE; + } else if ((factor == MPT_FAST) && width) { + factor = MPT_FAST; + width = MPT_NARROW; + } else if (factor < MPT_SCSI) { + factor = MPT_SCSI; + width = MPT_WIDE; + } else if ((factor == MPT_SCSI) && width) { + factor = MPT_SCSI; + width = MPT_NARROW; + } else { + factor = MPT_ASYNC; + offset = 0; + } + + } else if (offset) { + width = MPT_NARROW; + if (factor < MPT_ULTRA) + factor = MPT_ULTRA; + else if (factor < MPT_FAST) + factor = MPT_FAST; + else if (factor < MPT_SCSI) + factor = MPT_SCSI; + else { + factor = MPT_ASYNC; + offset = 0; + } + + } else { + width = MPT_NARROW; + factor = MPT_ASYNC; + } + dv->max.flags |= MPT_TARGET_NO_NEGO_QAS; + dv->max.flags &= ~MPT_TAPE_NEGO_IDP; + + dv->now.width = width; + dv->now.offset = offset; + dv->now.factor = factor; + dv->now.flags = dv->max.flags; + + pPage1 = (SCSIDevicePage1_t *)pPage; + if (pPage1) { + mptscsih_setDevicePage1Flags (width, factor, offset, &val, + &configuration, dv->now.flags); + dnegoprintk(("Finish: id=%d width=%d offset=%d factor=%x flags=%x request=%x config=%x\n", + id, width, offset, factor, dv->now.flags, val, configuration)); + + pPage1->RequestedParameters = le32_to_cpu(val); + pPage1->Reserved = 0; + pPage1->Configuration = le32_to_cpu(configuration); + } + + ddvprintk(("Finish: id=%d offset=%d factor=%x width=%d request=%x config=%x\n", + id, dv->now.offset, dv->now.factor, dv->now.width, val, configuration)); + break; + + case MPT_SAVE: + ddvprintk((MYIOC_s_NOTE_FMT + "Saving to Target structure: ", hd->ioc->name)); + ddvprintk(("id=%d width=%x factor=%x offset=%d flags=%x\n", + id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags)); + + /* Save these values to target structures + * or overwrite nvram (phys disks only). + */ + + if ((hd->Targets)&&((pTarget = hd->Targets[(int)id]) != NULL) && !pTarget->raidVolume ) { + pTarget->maxWidth = dv->now.width; + pTarget->maxOffset = dv->now.offset; + pTarget->minSyncFactor = dv->now.factor; + pTarget->negoFlags = dv->now.flags; + } else { + /* Preserv all flags, use + * read-modify-write algorithm + */ + if (hd->ioc->spi_data.nvram) { + data = hd->ioc->spi_data.nvram[id]; + + if (dv->now.width) + data &= ~MPT_NVRAM_WIDE_DISABLE; + else + data |= MPT_NVRAM_WIDE_DISABLE; + + if (!dv->now.offset) + factor = MPT_ASYNC; + + data &= ~MPT_NVRAM_SYNC_MASK; + data |= (dv->now.factor << MPT_NVRAM_SYNC_SHIFT) & MPT_NVRAM_SYNC_MASK; + + hd->ioc->spi_data.nvram[id] = data; + } + } + break; + } +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* mptscsih_fillbuf - fill a buffer with a special data pattern + * cleanup. For bus scan only. + * + * @buffer: Pointer to data buffer to be filled. + * @size: Number of bytes to fill + * @index: Pattern index + * @width: bus width, 0 (8 bits) or 1 (16 bits) + */ +static void +mptscsih_fillbuf(char *buffer, int size, int index, int width) +{ + char *ptr = buffer; + int ii; + char byte; + short val; + + switch (index) { + case 0: + + if (width) { + /* Pattern: 0000 FFFF 0000 FFFF + */ + for (ii=0; ii < size; ii++, ptr++) { + if (ii & 0x02) + *ptr = 0xFF; + else + *ptr = 0x00; + } + } else { + /* Pattern: 00 FF 00 FF + */ + for (ii=0; ii < size; ii++, ptr++) { + if (ii & 0x01) + *ptr = 0xFF; + else + *ptr = 0x00; + } + } + break; + + case 1: + if (width) { + /* Pattern: 5555 AAAA 5555 AAAA 5555 + */ + for (ii=0; ii < size; ii++, ptr++) { + if (ii & 0x02) + *ptr = 0xAA; + else + *ptr = 0x55; + } + } else { + /* Pattern: 55 AA 55 AA 55 + */ + for (ii=0; ii < size; ii++, ptr++) { + if (ii & 0x01) + *ptr = 0xAA; + else + *ptr = 0x55; + } + } + break; + + case 2: + /* Pattern: 00 01 02 03 04 05 + * ... FE FF 00 01.. + */ + for (ii=0; ii < size; ii++, ptr++) + *ptr = (char) ii; + break; + + case 3: + if (width) { + /* Wide Pattern: FFFE 0001 FFFD 0002 + * ... 4000 DFFF 8000 EFFF + */ + byte = 0; + for (ii=0; ii < size/2; ii++) { + /* Create the base pattern + */ + val = (1 << byte); + /* every 64 (0x40) bytes flip the pattern + * since we fill 2 bytes / iteration, + * test for ii = 0x20 + */ + if (ii & 0x20) + val = ~(val); + + if (ii & 0x01) { + *ptr = (char)( (val & 0xFF00) >> 8); + ptr++; + *ptr = (char)(val & 0xFF); + byte++; + byte &= 0x0F; + } else { + val = ~val; + *ptr = (char)( (val & 0xFF00) >> 8); + ptr++; + *ptr = (char)(val & 0xFF); + } + + ptr++; + } + } else { + /* Narrow Pattern: FE 01 FD 02 FB 04 + * .. 7F 80 01 FE 02 FD ... 80 7F + */ + byte = 0; + for (ii=0; ii < size; ii++, ptr++) { + /* Base pattern - first 32 bytes + */ + if (ii & 0x01) { + *ptr = (1 << byte); + byte++; + byte &= 0x07; + } else { + *ptr = (char) (~(1 << byte)); + } + + /* Flip the pattern every 32 bytes + */ + if (ii & 0x20) + *ptr = ~(*ptr); + } + } + break; + } +} +#endif /* ~MPTSCSIH_ENABLE_DOMAIN_VALIDATION */ + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +module_init(mptscsih_init); +module_exit(mptscsih_exit); diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h new file mode 100644 index 000000000000..5cb2fd45c38f --- /dev/null +++ b/drivers/message/fusion/mptscsih.h @@ -0,0 +1,94 @@ +/* + * linux/drivers/message/fusion/mptscsih.h + * High performance SCSI / Fibre Channel SCSI Host device driver. + * For use with PCI chip/adapter(s): + * LSIFC9xx/LSI409xx Fibre Channel + * running LSI Logic Fusion MPT (Message Passing Technology) firmware. + * + * Credits: + * This driver would not exist if not for Alan Cox's development + * of the linux i2o driver. + * + * A huge debt of gratitude is owed to David S. Miller (DaveM) + * for fixing much of the stupid and broken stuff in the early + * driver while porting to sparc64 platform. THANK YOU! + * + * (see also mptbase.c) + * + * Copyright (c) 1999-2004 LSI Logic Corporation + * Originally By: Steven J. Ralston + * (mailto:netscape.net) + * (mailto:mpt_linux_developer@lsil.com) + * + * $Id: mptscsih.h,v 1.21 2002/12/03 21:26:35 pdelaney Exp $ + */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + NO WARRANTY + THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + solely responsible for determining the appropriateness of using and + distributing the Program and assumes all risks associated with its + exercise of rights under this Agreement, including but not limited to + the risks and costs of program errors, damage to or loss of data, + programs or equipment, and unavailability or interruption of operations. + + DISCLAIMER OF LIABILITY + NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef SCSIHOST_H_INCLUDED +#define SCSIHOST_H_INCLUDED + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * SCSI Public stuff... + */ + +#define MPT_SCSI_CMD_PER_DEV_HIGH 31 +#define MPT_SCSI_CMD_PER_DEV_LOW 7 + +#define MPT_SCSI_CMD_PER_LUN 7 + +#define MPT_SCSI_MAX_SECTORS 8192 + +/* To disable domain validation, uncomment the + * following line. No effect for FC devices. + * For SCSI devices, driver will negotiate to + * NVRAM settings (if available) or to maximum adapter + * capabilities. + */ + +#define MPTSCSIH_ENABLE_DOMAIN_VALIDATION + + +/* SCSI driver setup structure. Settings can be overridden + * by command line options. + */ +#define MPTSCSIH_DOMAIN_VALIDATION 1 +#define MPTSCSIH_MAX_WIDTH 1 +#define MPTSCSIH_MIN_SYNC 0x08 +#define MPTSCSIH_SAF_TE 0 + +#endif diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig new file mode 100644 index 000000000000..8d132b0d6b12 --- /dev/null +++ b/drivers/message/i2o/Kconfig @@ -0,0 +1,75 @@ + +menu "I2O device support" + +config I2O + tristate "I2O support" + depends on PCI + ---help--- + The Intelligent Input/Output (I2O) architecture allows hardware + drivers to be split into two parts: an operating system specific + module called the OSM and an hardware specific module called the + HDM. The OSM can talk to a whole range of HDM's, and ideally the + HDM's are not OS dependent. This allows for the same HDM driver to + be used under different operating systems if the relevant OSM is in + place. In order for this to work, you need to have an I2O interface + adapter card in your computer. This card contains a special I/O + processor (IOP), thus allowing high speeds since the CPU does not + have to deal with I/O. + + If you say Y here, you will get a choice of interface adapter + drivers and OSM's with the following questions. + + To compile this support as a module, choose M here: the + modules will be called i2o_core. + + If unsure, say N. + +config I2O_CONFIG + tristate "I2O Configuration support" + depends on PCI && I2O + help + Say Y for support of the configuration interface for the I2O adapters. + If you have a RAID controller from Adaptec and you want to use the + raidutils to manage your RAID array, you have to say Y here. + + To compile this support as a module, choose M here: the + module will be called i2o_config. + +config I2O_BLOCK + tristate "I2O Block OSM" + depends on I2O + help + Include support for the I2O Block OSM. The Block OSM presents disk + and other structured block devices to the operating system. If you + are using an RAID controller, you could access the array only by + the Block OSM driver. But it is possible to access the single disks + by the SCSI OSM driver, for example to monitor the disks. + + To compile this support as a module, choose M here: the + module will be called i2o_block. + +config I2O_SCSI + tristate "I2O SCSI OSM" + depends on I2O && SCSI + help + Allows direct SCSI access to SCSI devices on a SCSI or FibreChannel + I2O controller. You can use both the SCSI and Block OSM together if + you wish. To access a RAID array, you must use the Block OSM driver. + But you could use the SCSI OSM driver to monitor the single disks. + + To compile this support as a module, choose M here: the + module will be called i2o_scsi. + +config I2O_PROC + tristate "I2O /proc support" + depends on I2O + help + If you say Y here and to "/proc file system support", you will be + able to read I2O related information from the virtual directory + /proc/i2o. + + To compile this support as a module, choose M here: the + module will be called i2o_proc. + +endmenu + diff --git a/drivers/message/i2o/Makefile b/drivers/message/i2o/Makefile new file mode 100644 index 000000000000..aabc6cdc3fce --- /dev/null +++ b/drivers/message/i2o/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for the kernel I2O OSM. +# +# Note : at this point, these files are compiled on all systems. +# In the future, some of these should be built conditionally. +# + +i2o_core-y += iop.o driver.o device.o debug.o pci.o exec-osm.o +obj-$(CONFIG_I2O) += i2o_core.o +obj-$(CONFIG_I2O_CONFIG)+= i2o_config.o +obj-$(CONFIG_I2O_BLOCK) += i2o_block.o +obj-$(CONFIG_I2O_SCSI) += i2o_scsi.o +obj-$(CONFIG_I2O_PROC) += i2o_proc.o diff --git a/drivers/message/i2o/README b/drivers/message/i2o/README new file mode 100644 index 000000000000..a81f851f7b5d --- /dev/null +++ b/drivers/message/i2o/README @@ -0,0 +1,98 @@ + + Linux I2O Support (c) Copyright 1999 Red Hat Software + and others. + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version + 2 of the License, or (at your option) any later version. + +AUTHORS (so far) + +Alan Cox, Building Number Three Ltd. + Core code, SCSI and Block OSMs + +Steve Ralston, LSI Logic Corp. + Debugging SCSI and Block OSM + +Deepak Saxena, Intel Corp. + Various core/block extensions + /proc interface, bug fixes + Ioctl interfaces for control + Debugging LAN OSM + +Philip Rumpf + Fixed assorted dumb SMP locking bugs + +Juha Sievanen, University of Helsinki Finland + LAN OSM code + /proc interface to LAN class + Bug fixes + Core code extensions + +Auvo Häkkinen, University of Helsinki Finland + LAN OSM code + /Proc interface to LAN class + Bug fixes + Core code extensions + +Taneli Vähäkangas, University of Helsinki Finland + Fixes to i2o_config + +CREDITS + + This work was made possible by + +Red Hat Software + Funding for the Building #3 part of the project + +Symbios Logic (Now LSI) + Host adapters, hints, known to work platforms when I hit + compatibility problems + +BoxHill Corporation + Loan of initial FibreChannel disk array used for development work. + +European Comission + Funding the work done by the University of Helsinki + +SysKonnect + Loan of FDDI and Gigabit Ethernet cards + +ASUSTeK + Loan of I2O motherboard + +STATUS: + +o The core setup works within limits. +o The scsi layer seems to almost work. + I'm still chasing down the hang bug. +o The block OSM is mostly functional +o LAN OSM works with FDDI and Ethernet cards. + +TO DO: + +General: +o Provide hidden address space if asked +o Long term message flow control +o PCI IOP's without interrupts are not supported yet +o Push FAIL handling into the core +o DDM control interfaces for module load etc +o Add I2O 2.0 support (Deffered to 2.5 kernel) + +Block: +o Multiple major numbers +o Read ahead and cache handling stuff. Talk to Ingo and people +o Power management +o Finish Media changers + +SCSI: +o Find the right way to associate drives/luns/busses + +Lan: +o Performance tuning +o Test Fibre Channel code + +Tape: +o Anyone seen anything implementing this ? + (D.S: Will attempt to do so if spare cycles permit) diff --git a/drivers/message/i2o/README.ioctl b/drivers/message/i2o/README.ioctl new file mode 100644 index 000000000000..73dd084c0e98 --- /dev/null +++ b/drivers/message/i2o/README.ioctl @@ -0,0 +1,394 @@ + +Linux I2O User Space Interface +rev 0.3 - 04/20/99 + +============================================================================= +Originally written by Deepak Saxena(deepak@plexity.net) +Currently maintained by Deepak Saxena(deepak@plexity.net) +============================================================================= + +I. Introduction + +The Linux I2O subsystem provides a set of ioctl() commands that can be +utilized by user space applications to communicate with IOPs and devices +on individual IOPs. This document defines the specific ioctl() commands +that are available to the user and provides examples of their uses. + +This document assumes the reader is familiar with or has access to the +I2O specification as no I2O message parameters are outlined. For information +on the specification, see http://www.i2osig.org + +This document and the I2O user space interface are currently maintained +by Deepak Saxena. Please send all comments, errata, and bug fixes to +deepak@csociety.purdue.edu + +II. IOP Access + +Access to the I2O subsystem is provided through the device file named +/dev/i2o/ctl. This file is a character file with major number 10 and minor +number 166. It can be created through the following command: + + mknod /dev/i2o/ctl c 10 166 + +III. Determining the IOP Count + + SYNOPSIS + + ioctl(fd, I2OGETIOPS, int *count); + + u8 count[MAX_I2O_CONTROLLERS]; + + DESCRIPTION + + This function returns the system's active IOP table. count should + point to a buffer containing MAX_I2O_CONTROLLERS entries. Upon + returning, each entry will contain a non-zero value if the given + IOP unit is active, and NULL if it is inactive or non-existent. + + RETURN VALUE. + + Returns 0 if no errors occur, and -1 otherwise. If an error occurs, + errno is set appropriately: + + EFAULT Invalid user space pointer was passed + +IV. Getting Hardware Resource Table + + SYNOPSIS + + ioctl(fd, I2OHRTGET, struct i2o_cmd_hrt *hrt); + + struct i2o_cmd_hrtlct + { + u32 iop; /* IOP unit number */ + void *resbuf; /* Buffer for result */ + u32 *reslen; /* Buffer length in bytes */ + }; + + DESCRIPTION + + This function returns the Hardware Resource Table of the IOP specified + by hrt->iop in the buffer pointed to by hrt->resbuf. The actual size of + the data is written into *(hrt->reslen). + + RETURNS + + This function returns 0 if no errors occur. If an error occurs, -1 + is returned and errno is set appropriately: + + EFAULT Invalid user space pointer was passed + ENXIO Invalid IOP number + ENOBUFS Buffer not large enough. If this occurs, the required + buffer length is written into *(hrt->reslen) + +V. Getting Logical Configuration Table + + SYNOPSIS + + ioctl(fd, I2OLCTGET, struct i2o_cmd_lct *lct); + + struct i2o_cmd_hrtlct + { + u32 iop; /* IOP unit number */ + void *resbuf; /* Buffer for result */ + u32 *reslen; /* Buffer length in bytes */ + }; + + DESCRIPTION + + This function returns the Logical Configuration Table of the IOP specified + by lct->iop in the buffer pointed to by lct->resbuf. The actual size of + the data is written into *(lct->reslen). + + RETURNS + + This function returns 0 if no errors occur. If an error occurs, -1 + is returned and errno is set appropriately: + + EFAULT Invalid user space pointer was passed + ENXIO Invalid IOP number + ENOBUFS Buffer not large enough. If this occurs, the required + buffer length is written into *(lct->reslen) + +VI. Settting Parameters + + SYNOPSIS + + ioctl(fd, I2OPARMSET, struct i2o_parm_setget *ops); + + struct i2o_cmd_psetget + { + u32 iop; /* IOP unit number */ + u32 tid; /* Target device TID */ + void *opbuf; /* Operation List buffer */ + u32 oplen; /* Operation List buffer length in bytes */ + void *resbuf; /* Result List buffer */ + u32 *reslen; /* Result List buffer length in bytes */ + }; + + DESCRIPTION + + This function posts a UtilParamsSet message to the device identified + by ops->iop and ops->tid. The operation list for the message is + sent through the ops->opbuf buffer, and the result list is written + into the buffer pointed to by ops->resbuf. The number of bytes + written is placed into *(ops->reslen). + + RETURNS + + The return value is the size in bytes of the data written into + ops->resbuf if no errors occur. If an error occurs, -1 is returned + and errno is set appropriatly: + + EFAULT Invalid user space pointer was passed + ENXIO Invalid IOP number + ENOBUFS Buffer not large enough. If this occurs, the required + buffer length is written into *(ops->reslen) + ETIMEDOUT Timeout waiting for reply message + ENOMEM Kernel memory allocation error + + A return value of 0 does not mean that the value was actually + changed properly on the IOP. The user should check the result + list to determine the specific status of the transaction. + +VII. Getting Parameters + + SYNOPSIS + + ioctl(fd, I2OPARMGET, struct i2o_parm_setget *ops); + + struct i2o_parm_setget + { + u32 iop; /* IOP unit number */ + u32 tid; /* Target device TID */ + void *opbuf; /* Operation List buffer */ + u32 oplen; /* Operation List buffer length in bytes */ + void *resbuf; /* Result List buffer */ + u32 *reslen; /* Result List buffer length in bytes */ + }; + + DESCRIPTION + + This function posts a UtilParamsGet message to the device identified + by ops->iop and ops->tid. The operation list for the message is + sent through the ops->opbuf buffer, and the result list is written + into the buffer pointed to by ops->resbuf. The actual size of data + written is placed into *(ops->reslen). + + RETURNS + + EFAULT Invalid user space pointer was passed + ENXIO Invalid IOP number + ENOBUFS Buffer not large enough. If this occurs, the required + buffer length is written into *(ops->reslen) + ETIMEDOUT Timeout waiting for reply message + ENOMEM Kernel memory allocation error + + A return value of 0 does not mean that the value was actually + properly retreived. The user should check the result list + to determine the specific status of the transaction. + +VIII. Downloading Software + + SYNOPSIS + + ioctl(fd, I2OSWDL, struct i2o_sw_xfer *sw); + + struct i2o_sw_xfer + { + u32 iop; /* IOP unit number */ + u8 flags; /* DownloadFlags field */ + u8 sw_type; /* Software type */ + u32 sw_id; /* Software ID */ + void *buf; /* Pointer to software buffer */ + u32 *swlen; /* Length of software buffer */ + u32 *maxfrag; /* Number of fragments */ + u32 *curfrag; /* Current fragment number */ + }; + + DESCRIPTION + + This function downloads a software fragment pointed by sw->buf + to the iop identified by sw->iop. The DownloadFlags, SwID, SwType + and SwSize fields of the ExecSwDownload message are filled in with + the values of sw->flags, sw->sw_id, sw->sw_type and *(sw->swlen). + + The fragments _must_ be sent in order and be 8K in size. The last + fragment _may_ be shorter, however. The kernel will compute its + size based on information in the sw->swlen field. + + Please note that SW transfers can take a long time. + + RETURNS + + This function returns 0 no errors occur. If an error occurs, -1 + is returned and errno is set appropriatly: + + EFAULT Invalid user space pointer was passed + ENXIO Invalid IOP number + ETIMEDOUT Timeout waiting for reply message + ENOMEM Kernel memory allocation error + +IX. Uploading Software + + SYNOPSIS + + ioctl(fd, I2OSWUL, struct i2o_sw_xfer *sw); + + struct i2o_sw_xfer + { + u32 iop; /* IOP unit number */ + u8 flags; /* UploadFlags */ + u8 sw_type; /* Software type */ + u32 sw_id; /* Software ID */ + void *buf; /* Pointer to software buffer */ + u32 *swlen; /* Length of software buffer */ + u32 *maxfrag; /* Number of fragments */ + u32 *curfrag; /* Current fragment number */ + }; + + DESCRIPTION + + This function uploads a software fragment from the IOP identified + by sw->iop, sw->sw_type, sw->sw_id and optionally sw->swlen fields. + The UploadFlags, SwID, SwType and SwSize fields of the ExecSwUpload + message are filled in with the values of sw->flags, sw->sw_id, + sw->sw_type and *(sw->swlen). + + The fragments _must_ be requested in order and be 8K in size. The + user is responsible for allocating memory pointed by sw->buf. The + last fragment _may_ be shorter. + + Please note that SW transfers can take a long time. + + RETURNS + + This function returns 0 if no errors occur. If an error occurs, -1 + is returned and errno is set appropriatly: + + EFAULT Invalid user space pointer was passed + ENXIO Invalid IOP number + ETIMEDOUT Timeout waiting for reply message + ENOMEM Kernel memory allocation error + +X. Removing Software + + SYNOPSIS + + ioctl(fd, I2OSWDEL, struct i2o_sw_xfer *sw); + + struct i2o_sw_xfer + { + u32 iop; /* IOP unit number */ + u8 flags; /* RemoveFlags */ + u8 sw_type; /* Software type */ + u32 sw_id; /* Software ID */ + void *buf; /* Unused */ + u32 *swlen; /* Length of the software data */ + u32 *maxfrag; /* Unused */ + u32 *curfrag; /* Unused */ + }; + + DESCRIPTION + + This function removes software from the IOP identified by sw->iop. + The RemoveFlags, SwID, SwType and SwSize fields of the ExecSwRemove message + are filled in with the values of sw->flags, sw->sw_id, sw->sw_type and + *(sw->swlen). Give zero in *(sw->len) if the value is unknown. IOP uses + *(sw->swlen) value to verify correct identication of the module to remove. + The actual size of the module is written into *(sw->swlen). + + RETURNS + + This function returns 0 if no errors occur. If an error occurs, -1 + is returned and errno is set appropriatly: + + EFAULT Invalid user space pointer was passed + ENXIO Invalid IOP number + ETIMEDOUT Timeout waiting for reply message + ENOMEM Kernel memory allocation error + +X. Validating Configuration + + SYNOPSIS + + ioctl(fd, I2OVALIDATE, int *iop); + u32 iop; + + DESCRIPTION + + This function posts an ExecConfigValidate message to the controller + identified by iop. This message indicates that the current + configuration is accepted. The iop changes the status of suspect drivers + to valid and may delete old drivers from its store. + + RETURNS + + This function returns 0 if no erro occur. If an error occurs, -1 is + returned and errno is set appropriatly: + + ETIMEDOUT Timeout waiting for reply message + ENXIO Invalid IOP number + +XI. Configuration Dialog + + SYNOPSIS + + ioctl(fd, I2OHTML, struct i2o_html *htquery); + struct i2o_html + { + u32 iop; /* IOP unit number */ + u32 tid; /* Target device ID */ + u32 page; /* HTML page */ + void *resbuf; /* Buffer for reply HTML page */ + u32 *reslen; /* Length in bytes of reply buffer */ + void *qbuf; /* Pointer to HTTP query string */ + u32 qlen; /* Length in bytes of query string buffer */ + }; + + DESCRIPTION + + This function posts an UtilConfigDialog message to the device identified + by htquery->iop and htquery->tid. The requested HTML page number is + provided by the htquery->page field, and the resultant data is stored + in the buffer pointed to by htquery->resbuf. If there is an HTTP query + string that is to be sent to the device, it should be sent in the buffer + pointed to by htquery->qbuf. If there is no query string, this field + should be set to NULL. The actual size of the reply received is written + into *(htquery->reslen). + + RETURNS + + This function returns 0 if no error occur. If an error occurs, -1 + is returned and errno is set appropriatly: + + EFAULT Invalid user space pointer was passed + ENXIO Invalid IOP number + ENOBUFS Buffer not large enough. If this occurs, the required + buffer length is written into *(ops->reslen) + ETIMEDOUT Timeout waiting for reply message + ENOMEM Kernel memory allocation error + +XII. Events + + In the process of determining this. Current idea is to have use + the select() interface to allow user apps to periodically poll + the /dev/i2o/ctl device for events. When select() notifies the user + that an event is available, the user would call read() to retrieve + a list of all the events that are pending for the specific device. + +============================================================================= +Revision History +============================================================================= + +Rev 0.1 - 04/01/99 +- Initial revision + +Rev 0.2 - 04/06/99 +- Changed return values to match UNIX ioctl() standard. Only return values + are 0 and -1. All errors are reported through errno. +- Added summary of proposed possible event interfaces + +Rev 0.3 - 04/20/99 +- Changed all ioctls() to use pointers to user data instead of actual data +- Updated error values to match the code diff --git a/drivers/message/i2o/debug.c b/drivers/message/i2o/debug.c new file mode 100644 index 000000000000..2a5d478fc60e --- /dev/null +++ b/drivers/message/i2o/debug.c @@ -0,0 +1,481 @@ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/i2o.h> + +extern struct i2o_driver **i2o_drivers; +extern unsigned int i2o_max_drivers; +static void i2o_report_util_cmd(u8 cmd); +static void i2o_report_exec_cmd(u8 cmd); +static void i2o_report_fail_status(u8 req_status, u32 * msg); +static void i2o_report_common_status(u8 req_status); +static void i2o_report_common_dsc(u16 detailed_status); + +/* + * Used for error reporting/debugging purposes. + * Report Cmd name, Request status, Detailed Status. + */ +void i2o_report_status(const char *severity, const char *str, + struct i2o_message *m) +{ + u32 *msg = (u32 *) m; + u8 cmd = (msg[1] >> 24) & 0xFF; + u8 req_status = (msg[4] >> 24) & 0xFF; + u16 detailed_status = msg[4] & 0xFFFF; + //struct i2o_driver *h = i2o_drivers[msg[2] & (i2o_max_drivers-1)]; + + if (cmd == I2O_CMD_UTIL_EVT_REGISTER) + return; // No status in this reply + + printk(KERN_DEBUG "%s%s: ", severity, str); + + if (cmd < 0x1F) // Utility cmd + i2o_report_util_cmd(cmd); + + else if (cmd >= 0xA0 && cmd <= 0xEF) // Executive cmd + i2o_report_exec_cmd(cmd); + else + printk(KERN_DEBUG "Cmd = %0#2x, ", cmd); // Other cmds + + if (msg[0] & MSG_FAIL) { + i2o_report_fail_status(req_status, msg); + return; + } + + i2o_report_common_status(req_status); + + if (cmd < 0x1F || (cmd >= 0xA0 && cmd <= 0xEF)) + i2o_report_common_dsc(detailed_status); + else + printk(KERN_DEBUG " / DetailedStatus = %0#4x.\n", + detailed_status); +} + +/* Used to dump a message to syslog during debugging */ +void i2o_dump_message(struct i2o_message *m) +{ +#ifdef DEBUG + u32 *msg = (u32 *) m; + int i; + printk(KERN_INFO "Dumping I2O message size %d @ %p\n", + msg[0] >> 16 & 0xffff, msg); + for (i = 0; i < ((msg[0] >> 16) & 0xffff); i++) + printk(KERN_INFO " msg[%d] = %0#10x\n", i, msg[i]); +#endif +} + +/* + * Used for error reporting/debugging purposes. + * Following fail status are common to all classes. + * The preserved message must be handled in the reply handler. + */ +static void i2o_report_fail_status(u8 req_status, u32 * msg) +{ + static char *FAIL_STATUS[] = { + "0x80", /* not used */ + "SERVICE_SUSPENDED", /* 0x81 */ + "SERVICE_TERMINATED", /* 0x82 */ + "CONGESTION", + "FAILURE", + "STATE_ERROR", + "TIME_OUT", + "ROUTING_FAILURE", + "INVALID_VERSION", + "INVALID_OFFSET", + "INVALID_MSG_FLAGS", + "FRAME_TOO_SMALL", + "FRAME_TOO_LARGE", + "INVALID_TARGET_ID", + "INVALID_INITIATOR_ID", + "INVALID_INITIATOR_CONTEX", /* 0x8F */ + "UNKNOWN_FAILURE" /* 0xFF */ + }; + + if (req_status == I2O_FSC_TRANSPORT_UNKNOWN_FAILURE) + printk(KERN_DEBUG "TRANSPORT_UNKNOWN_FAILURE (%0#2x)\n.", + req_status); + else + printk(KERN_DEBUG "TRANSPORT_%s.\n", + FAIL_STATUS[req_status & 0x0F]); + + /* Dump some details */ + + printk(KERN_ERR " InitiatorId = %d, TargetId = %d\n", + (msg[1] >> 12) & 0xFFF, msg[1] & 0xFFF); + printk(KERN_ERR " LowestVersion = 0x%02X, HighestVersion = 0x%02X\n", + (msg[4] >> 8) & 0xFF, msg[4] & 0xFF); + printk(KERN_ERR " FailingHostUnit = 0x%04X, FailingIOP = 0x%03X\n", + msg[5] >> 16, msg[5] & 0xFFF); + + printk(KERN_ERR " Severity: 0x%02X ", (msg[4] >> 16) & 0xFF); + if (msg[4] & (1 << 16)) + printk(KERN_DEBUG "(FormatError), " + "this msg can never be delivered/processed.\n"); + if (msg[4] & (1 << 17)) + printk(KERN_DEBUG "(PathError), " + "this msg can no longer be delivered/processed.\n"); + if (msg[4] & (1 << 18)) + printk(KERN_DEBUG "(PathState), " + "the system state does not allow delivery.\n"); + if (msg[4] & (1 << 19)) + printk(KERN_DEBUG + "(Congestion), resources temporarily not available;" + "do not retry immediately.\n"); +} + +/* + * Used for error reporting/debugging purposes. + * Following reply status are common to all classes. + */ +static void i2o_report_common_status(u8 req_status) +{ + static char *REPLY_STATUS[] = { + "SUCCESS", + "ABORT_DIRTY", + "ABORT_NO_DATA_TRANSFER", + "ABORT_PARTIAL_TRANSFER", + "ERROR_DIRTY", + "ERROR_NO_DATA_TRANSFER", + "ERROR_PARTIAL_TRANSFER", + "PROCESS_ABORT_DIRTY", + "PROCESS_ABORT_NO_DATA_TRANSFER", + "PROCESS_ABORT_PARTIAL_TRANSFER", + "TRANSACTION_ERROR", + "PROGRESS_REPORT" + }; + + if (req_status >= ARRAY_SIZE(REPLY_STATUS)) + printk(KERN_DEBUG "RequestStatus = %0#2x", req_status); + else + printk(KERN_DEBUG "%s", REPLY_STATUS[req_status]); +} + +/* + * Used for error reporting/debugging purposes. + * Following detailed status are valid for executive class, + * utility class, DDM class and for transaction error replies. + */ +static void i2o_report_common_dsc(u16 detailed_status) +{ + static char *COMMON_DSC[] = { + "SUCCESS", + "0x01", // not used + "BAD_KEY", + "TCL_ERROR", + "REPLY_BUFFER_FULL", + "NO_SUCH_PAGE", + "INSUFFICIENT_RESOURCE_SOFT", + "INSUFFICIENT_RESOURCE_HARD", + "0x08", // not used + "CHAIN_BUFFER_TOO_LARGE", + "UNSUPPORTED_FUNCTION", + "DEVICE_LOCKED", + "DEVICE_RESET", + "INAPPROPRIATE_FUNCTION", + "INVALID_INITIATOR_ADDRESS", + "INVALID_MESSAGE_FLAGS", + "INVALID_OFFSET", + "INVALID_PARAMETER", + "INVALID_REQUEST", + "INVALID_TARGET_ADDRESS", + "MESSAGE_TOO_LARGE", + "MESSAGE_TOO_SMALL", + "MISSING_PARAMETER", + "TIMEOUT", + "UNKNOWN_ERROR", + "UNKNOWN_FUNCTION", + "UNSUPPORTED_VERSION", + "DEVICE_BUSY", + "DEVICE_NOT_AVAILABLE" + }; + + if (detailed_status > I2O_DSC_DEVICE_NOT_AVAILABLE) + printk(KERN_DEBUG " / DetailedStatus = %0#4x.\n", + detailed_status); + else + printk(KERN_DEBUG " / %s.\n", COMMON_DSC[detailed_status]); +} + +/* + * Used for error reporting/debugging purposes + */ +static void i2o_report_util_cmd(u8 cmd) +{ + switch (cmd) { + case I2O_CMD_UTIL_NOP: + printk(KERN_DEBUG "UTIL_NOP, "); + break; + case I2O_CMD_UTIL_ABORT: + printk(KERN_DEBUG "UTIL_ABORT, "); + break; + case I2O_CMD_UTIL_CLAIM: + printk(KERN_DEBUG "UTIL_CLAIM, "); + break; + case I2O_CMD_UTIL_RELEASE: + printk(KERN_DEBUG "UTIL_CLAIM_RELEASE, "); + break; + case I2O_CMD_UTIL_CONFIG_DIALOG: + printk(KERN_DEBUG "UTIL_CONFIG_DIALOG, "); + break; + case I2O_CMD_UTIL_DEVICE_RESERVE: + printk(KERN_DEBUG "UTIL_DEVICE_RESERVE, "); + break; + case I2O_CMD_UTIL_DEVICE_RELEASE: + printk(KERN_DEBUG "UTIL_DEVICE_RELEASE, "); + break; + case I2O_CMD_UTIL_EVT_ACK: + printk(KERN_DEBUG "UTIL_EVENT_ACKNOWLEDGE, "); + break; + case I2O_CMD_UTIL_EVT_REGISTER: + printk(KERN_DEBUG "UTIL_EVENT_REGISTER, "); + break; + case I2O_CMD_UTIL_LOCK: + printk(KERN_DEBUG "UTIL_LOCK, "); + break; + case I2O_CMD_UTIL_LOCK_RELEASE: + printk(KERN_DEBUG "UTIL_LOCK_RELEASE, "); + break; + case I2O_CMD_UTIL_PARAMS_GET: + printk(KERN_DEBUG "UTIL_PARAMS_GET, "); + break; + case I2O_CMD_UTIL_PARAMS_SET: + printk(KERN_DEBUG "UTIL_PARAMS_SET, "); + break; + case I2O_CMD_UTIL_REPLY_FAULT_NOTIFY: + printk(KERN_DEBUG "UTIL_REPLY_FAULT_NOTIFY, "); + break; + default: + printk(KERN_DEBUG "Cmd = %0#2x, ", cmd); + } +} + +/* + * Used for error reporting/debugging purposes + */ +static void i2o_report_exec_cmd(u8 cmd) +{ + switch (cmd) { + case I2O_CMD_ADAPTER_ASSIGN: + printk(KERN_DEBUG "EXEC_ADAPTER_ASSIGN, "); + break; + case I2O_CMD_ADAPTER_READ: + printk(KERN_DEBUG "EXEC_ADAPTER_READ, "); + break; + case I2O_CMD_ADAPTER_RELEASE: + printk(KERN_DEBUG "EXEC_ADAPTER_RELEASE, "); + break; + case I2O_CMD_BIOS_INFO_SET: + printk(KERN_DEBUG "EXEC_BIOS_INFO_SET, "); + break; + case I2O_CMD_BOOT_DEVICE_SET: + printk(KERN_DEBUG "EXEC_BOOT_DEVICE_SET, "); + break; + case I2O_CMD_CONFIG_VALIDATE: + printk(KERN_DEBUG "EXEC_CONFIG_VALIDATE, "); + break; + case I2O_CMD_CONN_SETUP: + printk(KERN_DEBUG "EXEC_CONN_SETUP, "); + break; + case I2O_CMD_DDM_DESTROY: + printk(KERN_DEBUG "EXEC_DDM_DESTROY, "); + break; + case I2O_CMD_DDM_ENABLE: + printk(KERN_DEBUG "EXEC_DDM_ENABLE, "); + break; + case I2O_CMD_DDM_QUIESCE: + printk(KERN_DEBUG "EXEC_DDM_QUIESCE, "); + break; + case I2O_CMD_DDM_RESET: + printk(KERN_DEBUG "EXEC_DDM_RESET, "); + break; + case I2O_CMD_DDM_SUSPEND: + printk(KERN_DEBUG "EXEC_DDM_SUSPEND, "); + break; + case I2O_CMD_DEVICE_ASSIGN: + printk(KERN_DEBUG "EXEC_DEVICE_ASSIGN, "); + break; + case I2O_CMD_DEVICE_RELEASE: + printk(KERN_DEBUG "EXEC_DEVICE_RELEASE, "); + break; + case I2O_CMD_HRT_GET: + printk(KERN_DEBUG "EXEC_HRT_GET, "); + break; + case I2O_CMD_ADAPTER_CLEAR: + printk(KERN_DEBUG "EXEC_IOP_CLEAR, "); + break; + case I2O_CMD_ADAPTER_CONNECT: + printk(KERN_DEBUG "EXEC_IOP_CONNECT, "); + break; + case I2O_CMD_ADAPTER_RESET: + printk(KERN_DEBUG "EXEC_IOP_RESET, "); + break; + case I2O_CMD_LCT_NOTIFY: + printk(KERN_DEBUG "EXEC_LCT_NOTIFY, "); + break; + case I2O_CMD_OUTBOUND_INIT: + printk(KERN_DEBUG "EXEC_OUTBOUND_INIT, "); + break; + case I2O_CMD_PATH_ENABLE: + printk(KERN_DEBUG "EXEC_PATH_ENABLE, "); + break; + case I2O_CMD_PATH_QUIESCE: + printk(KERN_DEBUG "EXEC_PATH_QUIESCE, "); + break; + case I2O_CMD_PATH_RESET: + printk(KERN_DEBUG "EXEC_PATH_RESET, "); + break; + case I2O_CMD_STATIC_MF_CREATE: + printk(KERN_DEBUG "EXEC_STATIC_MF_CREATE, "); + break; + case I2O_CMD_STATIC_MF_RELEASE: + printk(KERN_DEBUG "EXEC_STATIC_MF_RELEASE, "); + break; + case I2O_CMD_STATUS_GET: + printk(KERN_DEBUG "EXEC_STATUS_GET, "); + break; + case I2O_CMD_SW_DOWNLOAD: + printk(KERN_DEBUG "EXEC_SW_DOWNLOAD, "); + break; + case I2O_CMD_SW_UPLOAD: + printk(KERN_DEBUG "EXEC_SW_UPLOAD, "); + break; + case I2O_CMD_SW_REMOVE: + printk(KERN_DEBUG "EXEC_SW_REMOVE, "); + break; + case I2O_CMD_SYS_ENABLE: + printk(KERN_DEBUG "EXEC_SYS_ENABLE, "); + break; + case I2O_CMD_SYS_MODIFY: + printk(KERN_DEBUG "EXEC_SYS_MODIFY, "); + break; + case I2O_CMD_SYS_QUIESCE: + printk(KERN_DEBUG "EXEC_SYS_QUIESCE, "); + break; + case I2O_CMD_SYS_TAB_SET: + printk(KERN_DEBUG "EXEC_SYS_TAB_SET, "); + break; + default: + printk(KERN_DEBUG "Cmd = %#02x, ", cmd); + } +} + +void i2o_debug_state(struct i2o_controller *c) +{ + printk(KERN_INFO "%s: State = ", c->name); + switch (((i2o_status_block *) c->status_block.virt)->iop_state) { + case 0x01: + printk(KERN_DEBUG "INIT\n"); + break; + case 0x02: + printk(KERN_DEBUG "RESET\n"); + break; + case 0x04: + printk(KERN_DEBUG "HOLD\n"); + break; + case 0x05: + printk(KERN_DEBUG "READY\n"); + break; + case 0x08: + printk(KERN_DEBUG "OPERATIONAL\n"); + break; + case 0x10: + printk(KERN_DEBUG "FAILED\n"); + break; + case 0x11: + printk(KERN_DEBUG "FAULTED\n"); + break; + default: + printk(KERN_DEBUG "%x (unknown !!)\n", + ((i2o_status_block *) c->status_block.virt)->iop_state); + } +}; + +void i2o_dump_hrt(struct i2o_controller *c) +{ + u32 *rows = (u32 *) c->hrt.virt; + u8 *p = (u8 *) c->hrt.virt; + u8 *d; + int count; + int length; + int i; + int state; + + if (p[3] != 0) { + printk(KERN_ERR + "%s: HRT table for controller is too new a version.\n", + c->name); + return; + } + + count = p[0] | (p[1] << 8); + length = p[2]; + + printk(KERN_INFO "%s: HRT has %d entries of %d bytes each.\n", + c->name, count, length << 2); + + rows += 2; + + for (i = 0; i < count; i++) { + printk(KERN_INFO "Adapter %08X: ", rows[0]); + p = (u8 *) (rows + 1); + d = (u8 *) (rows + 2); + state = p[1] << 8 | p[0]; + + printk(KERN_DEBUG "TID %04X:[", state & 0xFFF); + state >>= 12; + if (state & (1 << 0)) + printk(KERN_DEBUG "H"); /* Hidden */ + if (state & (1 << 2)) { + printk(KERN_DEBUG "P"); /* Present */ + if (state & (1 << 1)) + printk(KERN_DEBUG "C"); /* Controlled */ + } + if (state > 9) + printk(KERN_DEBUG "*"); /* Hard */ + + printk(KERN_DEBUG "]:"); + + switch (p[3] & 0xFFFF) { + case 0: + /* Adapter private bus - easy */ + printk(KERN_DEBUG + "Local bus %d: I/O at 0x%04X Mem 0x%08X", p[2], + d[1] << 8 | d[0], *(u32 *) (d + 4)); + break; + case 1: + /* ISA bus */ + printk(KERN_DEBUG + "ISA %d: CSN %d I/O at 0x%04X Mem 0x%08X", p[2], + d[2], d[1] << 8 | d[0], *(u32 *) (d + 4)); + break; + + case 2: /* EISA bus */ + printk(KERN_DEBUG + "EISA %d: Slot %d I/O at 0x%04X Mem 0x%08X", + p[2], d[3], d[1] << 8 | d[0], *(u32 *) (d + 4)); + break; + + case 3: /* MCA bus */ + printk(KERN_DEBUG + "MCA %d: Slot %d I/O at 0x%04X Mem 0x%08X", p[2], + d[3], d[1] << 8 | d[0], *(u32 *) (d + 4)); + break; + + case 4: /* PCI bus */ + printk(KERN_DEBUG + "PCI %d: Bus %d Device %d Function %d", p[2], + d[2], d[1], d[0]); + break; + + case 0x80: /* Other */ + default: + printk(KERN_DEBUG "Unsupported bus type."); + break; + } + printk(KERN_DEBUG "\n"); + rows += length; + } +} + +EXPORT_SYMBOL(i2o_dump_message); diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c new file mode 100644 index 000000000000..eb907e87bc7b --- /dev/null +++ b/drivers/message/i2o/device.c @@ -0,0 +1,634 @@ +/* + * Functions to handle I2O devices + * + * Copyright (C) 2004 Markus Lidel <Markus.Lidel@shadowconnect.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Fixes/additions: + * Markus Lidel <Markus.Lidel@shadowconnect.com> + * initial version. + */ + +#include <linux/module.h> +#include <linux/i2o.h> +#include <linux/delay.h> + +/* Exec OSM functions */ +extern struct bus_type i2o_bus_type; + +/** + * i2o_device_issue_claim - claim or release a device + * @dev: I2O device to claim or release + * @cmd: claim or release command + * @type: type of claim + * + * Issue I2O UTIL_CLAIM or UTIL_RELEASE messages. The message to be sent + * is set by cmd. dev is the I2O device which should be claim or + * released and the type is the claim type (see the I2O spec). + * + * Returs 0 on success or negative error code on failure. + */ +static inline int i2o_device_issue_claim(struct i2o_device *dev, u32 cmd, + u32 type) +{ + struct i2o_message __iomem *msg; + u32 m; + + m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(cmd << 24 | HOST_TID << 12 | dev->lct_data.tid, &msg->u.head[1]); + writel(type, &msg->body[0]); + + return i2o_msg_post_wait(dev->iop, m, 60); +}; + +/** + * i2o_device_claim - claim a device for use by an OSM + * @dev: I2O device to claim + * @drv: I2O driver which wants to claim the device + * + * Do the leg work to assign a device to a given OSM. If the claim succeed + * the owner of the rimary. If the attempt fails a negative errno code + * is returned. On success zero is returned. + */ +int i2o_device_claim(struct i2o_device *dev) +{ + int rc = 0; + + down(&dev->lock); + + rc = i2o_device_issue_claim(dev, I2O_CMD_UTIL_CLAIM, I2O_CLAIM_PRIMARY); + if (!rc) + pr_debug("i2o: claim of device %d succeded\n", + dev->lct_data.tid); + else + pr_debug("i2o: claim of device %d failed %d\n", + dev->lct_data.tid, rc); + + up(&dev->lock); + + return rc; +}; + +/** + * i2o_device_claim_release - release a device that the OSM is using + * @dev: device to release + * @drv: driver which claimed the device + * + * Drop a claim by an OSM on a given I2O device. + * + * AC - some devices seem to want to refuse an unclaim until they have + * finished internal processing. It makes sense since you don't want a + * new device to go reconfiguring the entire system until you are done. + * Thus we are prepared to wait briefly. + * + * Returns 0 on success or negative error code on failure. + */ +int i2o_device_claim_release(struct i2o_device *dev) +{ + int tries; + int rc = 0; + + down(&dev->lock); + + /* + * If the controller takes a nonblocking approach to + * releases we have to sleep/poll for a few times. + */ + for (tries = 0; tries < 10; tries++) { + rc = i2o_device_issue_claim(dev, I2O_CMD_UTIL_RELEASE, + I2O_CLAIM_PRIMARY); + if (!rc) + break; + + ssleep(1); + } + + if (!rc) + pr_debug("i2o: claim release of device %d succeded\n", + dev->lct_data.tid); + else + pr_debug("i2o: claim release of device %d failed %d\n", + dev->lct_data.tid, rc); + + up(&dev->lock); + + return rc; +}; + +/** + * i2o_device_release - release the memory for a I2O device + * @dev: I2O device which should be released + * + * Release the allocated memory. This function is called if refcount of + * device reaches 0 automatically. + */ +static void i2o_device_release(struct device *dev) +{ + struct i2o_device *i2o_dev = to_i2o_device(dev); + + pr_debug("i2o: device %s released\n", dev->bus_id); + + kfree(i2o_dev); +}; + +/** + * i2o_device_class_release - Remove I2O device attributes + * @cd: I2O class device which is added to the I2O device class + * + * Removes attributes from the I2O device again. Also search each device + * on the controller for I2O devices which refert to this device as parent + * or user and remove this links also. + */ +static void i2o_device_class_release(struct class_device *cd) +{ + struct i2o_device *i2o_dev, *tmp; + struct i2o_controller *c; + + i2o_dev = to_i2o_device(cd->dev); + c = i2o_dev->iop; + + sysfs_remove_link(&i2o_dev->device.kobj, "parent"); + sysfs_remove_link(&i2o_dev->device.kobj, "user"); + + list_for_each_entry(tmp, &c->devices, list) { + if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) + sysfs_remove_link(&tmp->device.kobj, "parent"); + if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid) + sysfs_remove_link(&tmp->device.kobj, "user"); + } +}; + +/* I2O device class */ +static struct class i2o_device_class = { + .name = "i2o_device", + .release = i2o_device_class_release +}; + +/** + * i2o_device_alloc - Allocate a I2O device and initialize it + * + * Allocate the memory for a I2O device and initialize locks and lists + * + * Returns the allocated I2O device or a negative error code if the device + * could not be allocated. + */ +static struct i2o_device *i2o_device_alloc(void) +{ + struct i2o_device *dev; + + dev = kmalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return ERR_PTR(-ENOMEM); + + memset(dev, 0, sizeof(*dev)); + + INIT_LIST_HEAD(&dev->list); + init_MUTEX(&dev->lock); + + dev->device.bus = &i2o_bus_type; + dev->device.release = &i2o_device_release; + dev->classdev.class = &i2o_device_class; + dev->classdev.dev = &dev->device; + + return dev; +}; + +/** + * i2o_device_add - allocate a new I2O device and add it to the IOP + * @iop: I2O controller where the device is on + * @entry: LCT entry of the I2O device + * + * Allocate a new I2O device and initialize it with the LCT entry. The + * device is appended to the device list of the controller. + * + * Returns a pointer to the I2O device on success or negative error code + * on failure. + */ +static struct i2o_device *i2o_device_add(struct i2o_controller *c, + i2o_lct_entry * entry) +{ + struct i2o_device *dev; + + dev = i2o_device_alloc(); + if (IS_ERR(dev)) { + printk(KERN_ERR "i2o: unable to allocate i2o device\n"); + return dev; + } + + dev->lct_data = *entry; + + snprintf(dev->device.bus_id, BUS_ID_SIZE, "%d:%03x", c->unit, + dev->lct_data.tid); + + snprintf(dev->classdev.class_id, BUS_ID_SIZE, "%d:%03x", c->unit, + dev->lct_data.tid); + + dev->iop = c; + dev->device.parent = &c->device; + + device_register(&dev->device); + + list_add_tail(&dev->list, &c->devices); + + class_device_register(&dev->classdev); + + i2o_driver_notify_device_add_all(dev); + + pr_debug("i2o: device %s added\n", dev->device.bus_id); + + return dev; +}; + +/** + * i2o_device_remove - remove an I2O device from the I2O core + * @dev: I2O device which should be released + * + * Is used on I2O controller removal or LCT modification, when the device + * is removed from the system. Note that the device could still hang + * around until the refcount reaches 0. + */ +void i2o_device_remove(struct i2o_device *i2o_dev) +{ + i2o_driver_notify_device_remove_all(i2o_dev); + class_device_unregister(&i2o_dev->classdev); + list_del(&i2o_dev->list); + device_unregister(&i2o_dev->device); +}; + +/** + * i2o_device_parse_lct - Parse a previously fetched LCT and create devices + * @c: I2O controller from which the LCT should be parsed. + * + * The Logical Configuration Table tells us what we can talk to on the + * board. For every entry we create an I2O device, which is registered in + * the I2O core. + * + * Returns 0 on success or negative error code on failure. + */ +int i2o_device_parse_lct(struct i2o_controller *c) +{ + struct i2o_device *dev, *tmp; + i2o_lct *lct; + int i; + int max; + + down(&c->lct_lock); + + if (c->lct) + kfree(c->lct); + + lct = c->dlct.virt; + + c->lct = kmalloc(lct->table_size * 4, GFP_KERNEL); + if (!c->lct) { + up(&c->lct_lock); + return -ENOMEM; + } + + if (lct->table_size * 4 > c->dlct.len) { + memcpy_fromio(c->lct, c->dlct.virt, c->dlct.len); + up(&c->lct_lock); + return -EAGAIN; + } + + memcpy_fromio(c->lct, c->dlct.virt, lct->table_size * 4); + + lct = c->lct; + + max = (lct->table_size - 3) / 9; + + pr_debug("%s: LCT has %d entries (LCT size: %d)\n", c->name, max, + lct->table_size); + + /* remove devices, which are not in the LCT anymore */ + list_for_each_entry_safe(dev, tmp, &c->devices, list) { + int found = 0; + + for (i = 0; i < max; i++) { + if (lct->lct_entry[i].tid == dev->lct_data.tid) { + found = 1; + break; + } + } + + if (!found) + i2o_device_remove(dev); + } + + /* add new devices, which are new in the LCT */ + for (i = 0; i < max; i++) { + int found = 0; + + list_for_each_entry_safe(dev, tmp, &c->devices, list) { + if (lct->lct_entry[i].tid == dev->lct_data.tid) { + found = 1; + break; + } + } + + if (!found) + i2o_device_add(c, &lct->lct_entry[i]); + } + up(&c->lct_lock); + + return 0; +}; + +/** + * i2o_device_class_show_class_id - Displays class id of I2O device + * @cd: class device of which the class id should be displayed + * @buf: buffer into which the class id should be printed + * + * Returns the number of bytes which are printed into the buffer. + */ +static ssize_t i2o_device_class_show_class_id(struct class_device *cd, + char *buf) +{ + struct i2o_device *dev = to_i2o_device(cd->dev); + + sprintf(buf, "%03x\n", dev->lct_data.class_id); + return strlen(buf) + 1; +}; + +/** + * i2o_device_class_show_tid - Displays TID of I2O device + * @cd: class device of which the TID should be displayed + * @buf: buffer into which the class id should be printed + * + * Returns the number of bytes which are printed into the buffer. + */ +static ssize_t i2o_device_class_show_tid(struct class_device *cd, char *buf) +{ + struct i2o_device *dev = to_i2o_device(cd->dev); + + sprintf(buf, "%03x\n", dev->lct_data.tid); + return strlen(buf) + 1; +}; + +/* I2O device class attributes */ +static CLASS_DEVICE_ATTR(class_id, S_IRUGO, i2o_device_class_show_class_id, + NULL); +static CLASS_DEVICE_ATTR(tid, S_IRUGO, i2o_device_class_show_tid, NULL); + +/** + * i2o_device_class_add - Adds attributes to the I2O device + * @cd: I2O class device which is added to the I2O device class + * + * This function get called when a I2O device is added to the class. It + * creates the attributes for each device and creates user/parent symlink + * if necessary. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_device_class_add(struct class_device *cd) +{ + struct i2o_device *i2o_dev, *tmp; + struct i2o_controller *c; + + i2o_dev = to_i2o_device(cd->dev); + c = i2o_dev->iop; + + class_device_create_file(cd, &class_device_attr_class_id); + class_device_create_file(cd, &class_device_attr_tid); + + /* create user entries for this device */ + tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.user_tid); + if (tmp) + sysfs_create_link(&i2o_dev->device.kobj, &tmp->device.kobj, + "user"); + + /* create user entries refering to this device */ + list_for_each_entry(tmp, &c->devices, list) + if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid) + sysfs_create_link(&tmp->device.kobj, + &i2o_dev->device.kobj, "user"); + + /* create parent entries for this device */ + tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.parent_tid); + if (tmp) + sysfs_create_link(&i2o_dev->device.kobj, &tmp->device.kobj, + "parent"); + + /* create parent entries refering to this device */ + list_for_each_entry(tmp, &c->devices, list) + if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) + sysfs_create_link(&tmp->device.kobj, + &i2o_dev->device.kobj, "parent"); + + return 0; +}; + +/* I2O device class interface */ +static struct class_interface i2o_device_class_interface = { + .class = &i2o_device_class, + .add = i2o_device_class_add +}; + +/* + * Run time support routines + */ + +/* Issue UTIL_PARAMS_GET or UTIL_PARAMS_SET + * + * This function can be used for all UtilParamsGet/Set operations. + * The OperationList is given in oplist-buffer, + * and results are returned in reslist-buffer. + * Note that the minimum sized reslist is 8 bytes and contains + * ResultCount, ErrorInfoSize, BlockStatus and BlockSize. + */ + +int i2o_parm_issue(struct i2o_device *i2o_dev, int cmd, void *oplist, + int oplen, void *reslist, int reslen) +{ + struct i2o_message __iomem *msg; + u32 m; + u32 *res32 = (u32 *) reslist; + u32 *restmp = (u32 *) reslist; + int len = 0; + int i = 0; + int rc; + struct i2o_dma res; + struct i2o_controller *c = i2o_dev->iop; + struct device *dev = &c->pdev->dev; + + res.virt = NULL; + + if (i2o_dma_alloc(dev, &res, reslen, GFP_KERNEL)) + return -ENOMEM; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) { + i2o_dma_free(dev, &res); + return -ETIMEDOUT; + } + + i = 0; + writel(cmd << 24 | HOST_TID << 12 | i2o_dev->lct_data.tid, + &msg->u.head[1]); + writel(0, &msg->body[i++]); + writel(0x4C000000 | oplen, &msg->body[i++]); /* OperationList */ + memcpy_toio(&msg->body[i], oplist, oplen); + i += (oplen / 4 + (oplen % 4 ? 1 : 0)); + writel(0xD0000000 | res.len, &msg->body[i++]); /* ResultList */ + writel(res.phys, &msg->body[i++]); + + writel(I2O_MESSAGE_SIZE(i + sizeof(struct i2o_message) / 4) | + SGL_OFFSET_5, &msg->u.head[0]); + + rc = i2o_msg_post_wait_mem(c, m, 10, &res); + + /* This only looks like a memory leak - don't "fix" it. */ + if (rc == -ETIMEDOUT) + return rc; + + memcpy_fromio(reslist, res.virt, res.len); + i2o_dma_free(dev, &res); + + /* Query failed */ + if (rc) + return rc; + /* + * Calculate number of bytes of Result LIST + * We need to loop through each Result BLOCK and grab the length + */ + restmp = res32 + 1; + len = 1; + for (i = 0; i < (res32[0] & 0X0000FFFF); i++) { + if (restmp[0] & 0x00FF0000) { /* BlockStatus != SUCCESS */ + printk(KERN_WARNING + "%s - Error:\n ErrorInfoSize = 0x%02x, " + "BlockStatus = 0x%02x, BlockSize = 0x%04x\n", + (cmd == + I2O_CMD_UTIL_PARAMS_SET) ? "PARAMS_SET" : + "PARAMS_GET", res32[1] >> 24, + (res32[1] >> 16) & 0xFF, res32[1] & 0xFFFF); + + /* + * If this is the only request,than we return an error + */ + if ((res32[0] & 0x0000FFFF) == 1) { + return -((res32[1] >> 16) & 0xFF); /* -BlockStatus */ + } + } + len += restmp[0] & 0x0000FFFF; /* Length of res BLOCK */ + restmp += restmp[0] & 0x0000FFFF; /* Skip to next BLOCK */ + } + return (len << 2); /* bytes used by result list */ +} + +/* + * Query one field group value or a whole scalar group. + */ +int i2o_parm_field_get(struct i2o_device *i2o_dev, int group, int field, + void *buf, int buflen) +{ + u16 opblk[] = { 1, 0, I2O_PARAMS_FIELD_GET, group, 1, field }; + u8 resblk[8 + buflen]; /* 8 bytes for header */ + int size; + + if (field == -1) /* whole group */ + opblk[4] = -1; + + size = i2o_parm_issue(i2o_dev, I2O_CMD_UTIL_PARAMS_GET, opblk, + sizeof(opblk), resblk, sizeof(resblk)); + + memcpy(buf, resblk + 8, buflen); /* cut off header */ + + if (size > buflen) + return buflen; + + return size; +} + +/* + * if oper == I2O_PARAMS_TABLE_GET, get from all rows + * if fieldcount == -1 return all fields + * ibuf and ibuflen are unused (use NULL, 0) + * else return specific fields + * ibuf contains fieldindexes + * + * if oper == I2O_PARAMS_LIST_GET, get from specific rows + * if fieldcount == -1 return all fields + * ibuf contains rowcount, keyvalues + * else return specific fields + * fieldcount is # of fieldindexes + * ibuf contains fieldindexes, rowcount, keyvalues + * + * You could also use directly function i2o_issue_params(). + */ +int i2o_parm_table_get(struct i2o_device *dev, int oper, int group, + int fieldcount, void *ibuf, int ibuflen, void *resblk, + int reslen) +{ + u16 *opblk; + int size; + + size = 10 + ibuflen; + if (size % 4) + size += 4 - size % 4; + + opblk = kmalloc(size, GFP_KERNEL); + if (opblk == NULL) { + printk(KERN_ERR "i2o: no memory for query buffer.\n"); + return -ENOMEM; + } + + opblk[0] = 1; /* operation count */ + opblk[1] = 0; /* pad */ + opblk[2] = oper; + opblk[3] = group; + opblk[4] = fieldcount; + memcpy(opblk + 5, ibuf, ibuflen); /* other params */ + + size = i2o_parm_issue(dev, I2O_CMD_UTIL_PARAMS_GET, opblk, + size, resblk, reslen); + + kfree(opblk); + if (size > reslen) + return reslen; + + return size; +} + +/** + * i2o_device_init - Initialize I2O devices + * + * Registers the I2O device class. + * + * Returns 0 on success or negative error code on failure. + */ +int i2o_device_init(void) +{ + int rc; + + rc = class_register(&i2o_device_class); + if (rc) + return rc; + + return class_interface_register(&i2o_device_class_interface); +}; + +/** + * i2o_device_exit - I2O devices exit function + * + * Unregisters the I2O device class. + */ +void i2o_device_exit(void) +{ + class_interface_register(&i2o_device_class_interface); + class_unregister(&i2o_device_class); +}; + +EXPORT_SYMBOL(i2o_device_claim); +EXPORT_SYMBOL(i2o_device_claim_release); +EXPORT_SYMBOL(i2o_parm_field_get); +EXPORT_SYMBOL(i2o_parm_table_get); +EXPORT_SYMBOL(i2o_parm_issue); diff --git a/drivers/message/i2o/driver.c b/drivers/message/i2o/driver.c new file mode 100644 index 000000000000..91f4edbb2a27 --- /dev/null +++ b/drivers/message/i2o/driver.c @@ -0,0 +1,374 @@ +/* + * Functions to handle I2O drivers (OSMs) and I2O bus type for sysfs + * + * Copyright (C) 2004 Markus Lidel <Markus.Lidel@shadowconnect.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Fixes/additions: + * Markus Lidel <Markus.Lidel@shadowconnect.com> + * initial version. + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/rwsem.h> +#include <linux/i2o.h> + +/* max_drivers - Maximum I2O drivers (OSMs) which could be registered */ +unsigned int i2o_max_drivers = I2O_MAX_DRIVERS; +module_param_named(max_drivers, i2o_max_drivers, uint, 0); +MODULE_PARM_DESC(max_drivers, "maximum number of OSM's to support"); + +/* I2O drivers lock and array */ +static spinlock_t i2o_drivers_lock; +static struct i2o_driver **i2o_drivers; + +/** + * i2o_bus_match - Tell if a I2O device class id match the class ids of + * the I2O driver (OSM) + * + * @dev: device which should be verified + * @drv: the driver to match against + * + * Used by the bus to check if the driver wants to handle the device. + * + * Returns 1 if the class ids of the driver match the class id of the + * device, otherwise 0. + */ +static int i2o_bus_match(struct device *dev, struct device_driver *drv) +{ + struct i2o_device *i2o_dev = to_i2o_device(dev); + struct i2o_driver *i2o_drv = to_i2o_driver(drv); + struct i2o_class_id *ids = i2o_drv->classes; + + if (ids) + while (ids->class_id != I2O_CLASS_END) { + if (ids->class_id == i2o_dev->lct_data.class_id) + return 1; + ids++; + } + return 0; +}; + +/* I2O bus type */ +struct bus_type i2o_bus_type = { + .name = "i2o", + .match = i2o_bus_match, +}; + +/** + * i2o_driver_register - Register a I2O driver (OSM) in the I2O core + * @drv: I2O driver which should be registered + * + * Registers the OSM drv in the I2O core and creates an event queues if + * necessary. + * + * Returns 0 on success or negative error code on failure. + */ +int i2o_driver_register(struct i2o_driver *drv) +{ + struct i2o_controller *c; + int i; + int rc = 0; + unsigned long flags; + + pr_debug("i2o: Register driver %s\n", drv->name); + + if (drv->event) { + drv->event_queue = create_workqueue(drv->name); + if (!drv->event_queue) { + printk(KERN_ERR "i2o: Could not initialize event queue " + "for driver %s\n", drv->name); + return -EFAULT; + } + pr_debug("i2o: Event queue initialized for driver %s\n", + drv->name); + } else + drv->event_queue = NULL; + + drv->driver.name = drv->name; + drv->driver.bus = &i2o_bus_type; + + spin_lock_irqsave(&i2o_drivers_lock, flags); + + for (i = 0; i2o_drivers[i]; i++) + if (i >= i2o_max_drivers) { + printk(KERN_ERR "i2o: too many drivers registered, " + "increase max_drivers\n"); + spin_unlock_irqrestore(&i2o_drivers_lock, flags); + return -EFAULT; + } + + drv->context = i; + i2o_drivers[i] = drv; + + spin_unlock_irqrestore(&i2o_drivers_lock, flags); + + pr_debug("i2o: driver %s gets context id %d\n", drv->name, + drv->context); + + list_for_each_entry(c, &i2o_controllers, list) { + struct i2o_device *i2o_dev; + + i2o_driver_notify_controller_add(drv, c); + list_for_each_entry(i2o_dev, &c->devices, list) + i2o_driver_notify_device_add(drv, i2o_dev); + } + + + rc = driver_register(&drv->driver); + if (rc) + destroy_workqueue(drv->event_queue); + + return rc; +}; + +/** + * i2o_driver_unregister - Unregister a I2O driver (OSM) from the I2O core + * @drv: I2O driver which should be unregistered + * + * Unregisters the OSM drv from the I2O core and cleanup event queues if + * necessary. + */ +void i2o_driver_unregister(struct i2o_driver *drv) +{ + struct i2o_controller *c; + unsigned long flags; + + pr_debug("i2o: unregister driver %s\n", drv->name); + + driver_unregister(&drv->driver); + + list_for_each_entry(c, &i2o_controllers, list) { + struct i2o_device *i2o_dev; + + list_for_each_entry(i2o_dev, &c->devices, list) + i2o_driver_notify_device_remove(drv, i2o_dev); + + i2o_driver_notify_controller_remove(drv, c); + } + + spin_lock_irqsave(&i2o_drivers_lock, flags); + i2o_drivers[drv->context] = NULL; + spin_unlock_irqrestore(&i2o_drivers_lock, flags); + + if (drv->event_queue) { + destroy_workqueue(drv->event_queue); + drv->event_queue = NULL; + pr_debug("i2o: event queue removed for %s\n", drv->name); + } +}; + +/** + * i2o_driver_dispatch - dispatch an I2O reply message + * @c: I2O controller of the message + * @m: I2O message number + * @msg: I2O message to be delivered + * + * The reply is delivered to the driver from which the original message + * was. This function is only called from interrupt context. + * + * Returns 0 on success and the message should not be flushed. Returns > 0 + * on success and if the message should be flushed afterwords. Returns + * negative error code on failure (the message will be flushed too). + */ +int i2o_driver_dispatch(struct i2o_controller *c, u32 m, + struct i2o_message __iomem *msg) +{ + struct i2o_driver *drv; + u32 context = readl(&msg->u.s.icntxt); + + if (likely(context < i2o_max_drivers)) { + spin_lock(&i2o_drivers_lock); + drv = i2o_drivers[context]; + spin_unlock(&i2o_drivers_lock); + + if (unlikely(!drv)) { + printk(KERN_WARNING "%s: Spurious reply to unknown " + "driver %d\n", c->name, context); + return -EIO; + } + + if ((readl(&msg->u.head[1]) >> 24) == I2O_CMD_UTIL_EVT_REGISTER) { + struct i2o_device *dev, *tmp; + struct i2o_event *evt; + u16 size; + u16 tid; + + tid = readl(&msg->u.head[1]) & 0x1fff; + + pr_debug("%s: event received from device %d\n", c->name, + tid); + + /* cut of header from message size (in 32-bit words) */ + size = (readl(&msg->u.head[0]) >> 16) - 5; + + evt = kmalloc(size * 4 + sizeof(*evt), GFP_ATOMIC); + if (!evt) + return -ENOMEM; + memset(evt, 0, size * 4 + sizeof(*evt)); + + evt->size = size; + memcpy_fromio(&evt->tcntxt, &msg->u.s.tcntxt, + (size + 2) * 4); + + list_for_each_entry_safe(dev, tmp, &c->devices, list) + if (dev->lct_data.tid == tid) { + evt->i2o_dev = dev; + break; + } + + INIT_WORK(&evt->work, (void (*)(void *))drv->event, + evt); + queue_work(drv->event_queue, &evt->work); + return 1; + } + + if (likely(drv->reply)) + return drv->reply(c, m, msg); + else + pr_debug("%s: Reply to driver %s, but no reply function" + " defined!\n", c->name, drv->name); + return -EIO; + } else + printk(KERN_WARNING "%s: Spurious reply to unknown driver " + "%d\n", c->name, readl(&msg->u.s.icntxt)); + return -EIO; +} + +/** + * i2o_driver_notify_controller_add_all - Send notify of added controller + * to all I2O drivers + * + * Send notifications to all registered drivers that a new controller was + * added. + */ +void i2o_driver_notify_controller_add_all(struct i2o_controller *c) +{ + int i; + struct i2o_driver *drv; + + for (i = 0; i < I2O_MAX_DRIVERS; i++) { + drv = i2o_drivers[i]; + + if (drv) + i2o_driver_notify_controller_add(drv, c); + } +} + +/** + * i2o_driver_notify_controller_remove_all - Send notify of removed + * controller to all I2O drivers + * + * Send notifications to all registered drivers that a controller was + * removed. + */ +void i2o_driver_notify_controller_remove_all(struct i2o_controller *c) +{ + int i; + struct i2o_driver *drv; + + for (i = 0; i < I2O_MAX_DRIVERS; i++) { + drv = i2o_drivers[i]; + + if (drv) + i2o_driver_notify_controller_remove(drv, c); + } +} + +/** + * i2o_driver_notify_device_add_all - Send notify of added device to all + * I2O drivers + * + * Send notifications to all registered drivers that a device was added. + */ +void i2o_driver_notify_device_add_all(struct i2o_device *i2o_dev) +{ + int i; + struct i2o_driver *drv; + + for (i = 0; i < I2O_MAX_DRIVERS; i++) { + drv = i2o_drivers[i]; + + if (drv) + i2o_driver_notify_device_add(drv, i2o_dev); + } +} + +/** + * i2o_driver_notify_device_remove_all - Send notify of removed device to + * all I2O drivers + * + * Send notifications to all registered drivers that a device was removed. + */ +void i2o_driver_notify_device_remove_all(struct i2o_device *i2o_dev) +{ + int i; + struct i2o_driver *drv; + + for (i = 0; i < I2O_MAX_DRIVERS; i++) { + drv = i2o_drivers[i]; + + if (drv) + i2o_driver_notify_device_remove(drv, i2o_dev); + } +} + +/** + * i2o_driver_init - initialize I2O drivers (OSMs) + * + * Registers the I2O bus and allocate memory for the array of OSMs. + * + * Returns 0 on success or negative error code on failure. + */ +int __init i2o_driver_init(void) +{ + int rc = 0; + + spin_lock_init(&i2o_drivers_lock); + + if ((i2o_max_drivers < 2) || (i2o_max_drivers > 64) || + ((i2o_max_drivers ^ (i2o_max_drivers - 1)) != + (2 * i2o_max_drivers - 1))) { + printk(KERN_WARNING "i2o: max_drivers set to %d, but must be " + ">=2 and <= 64 and a power of 2\n", i2o_max_drivers); + i2o_max_drivers = I2O_MAX_DRIVERS; + } + printk(KERN_INFO "i2o: max drivers = %d\n", i2o_max_drivers); + + i2o_drivers = + kmalloc(i2o_max_drivers * sizeof(*i2o_drivers), GFP_KERNEL); + if (!i2o_drivers) + return -ENOMEM; + + memset(i2o_drivers, 0, i2o_max_drivers * sizeof(*i2o_drivers)); + + rc = bus_register(&i2o_bus_type); + + if (rc < 0) + kfree(i2o_drivers); + + return rc; +}; + +/** + * i2o_driver_exit - clean up I2O drivers (OSMs) + * + * Unregisters the I2O bus and free driver array. + */ +void __exit i2o_driver_exit(void) +{ + bus_unregister(&i2o_bus_type); + kfree(i2o_drivers); +}; + +EXPORT_SYMBOL(i2o_driver_register); +EXPORT_SYMBOL(i2o_driver_unregister); +EXPORT_SYMBOL(i2o_driver_notify_controller_add_all); +EXPORT_SYMBOL(i2o_driver_notify_controller_remove_all); +EXPORT_SYMBOL(i2o_driver_notify_device_add_all); +EXPORT_SYMBOL(i2o_driver_notify_device_remove_all); diff --git a/drivers/message/i2o/exec-osm.c b/drivers/message/i2o/exec-osm.c new file mode 100644 index 000000000000..79c1cbfb8f44 --- /dev/null +++ b/drivers/message/i2o/exec-osm.c @@ -0,0 +1,507 @@ +/* + * Executive OSM + * + * Copyright (C) 1999-2002 Red Hat Software + * + * Written by Alan Cox, Building Number Three Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * A lot of the I2O message side code from this is taken from the Red + * Creek RCPCI45 adapter driver by Red Creek Communications + * + * Fixes/additions: + * Philipp Rumpf + * Juha Sievänen <Juha.Sievanen@cs.Helsinki.FI> + * Auvo Häkkinen <Auvo.Hakkinen@cs.Helsinki.FI> + * Deepak Saxena <deepak@plexity.net> + * Boji T Kannanthanam <boji.t.kannanthanam@intel.com> + * Alan Cox <alan@redhat.com>: + * Ported to Linux 2.5. + * Markus Lidel <Markus.Lidel@shadowconnect.com>: + * Minor fixes for 2.6. + * Markus Lidel <Markus.Lidel@shadowconnect.com>: + * Support for sysfs included. + */ + +#include <linux/module.h> +#include <linux/i2o.h> +#include <linux/delay.h> + +#define OSM_NAME "exec-osm" + +struct i2o_driver i2o_exec_driver; + +static int i2o_exec_lct_notify(struct i2o_controller *c, u32 change_ind); + +/* Module internal functions from other sources */ +extern int i2o_device_parse_lct(struct i2o_controller *); + +/* global wait list for POST WAIT */ +static LIST_HEAD(i2o_exec_wait_list); + +/* Wait struct needed for POST WAIT */ +struct i2o_exec_wait { + wait_queue_head_t *wq; /* Pointer to Wait queue */ + struct i2o_dma dma; /* DMA buffers to free on failure */ + u32 tcntxt; /* transaction context from reply */ + int complete; /* 1 if reply received otherwise 0 */ + u32 m; /* message id */ + struct i2o_message __iomem *msg; /* pointer to the reply message */ + struct list_head list; /* node in global wait list */ +}; + +/* Exec OSM class handling definition */ +static struct i2o_class_id i2o_exec_class_id[] = { + {I2O_CLASS_EXECUTIVE}, + {I2O_CLASS_END} +}; + +/** + * i2o_exec_wait_alloc - Allocate a i2o_exec_wait struct an initialize it + * + * Allocate the i2o_exec_wait struct and initialize the wait. + * + * Returns i2o_exec_wait pointer on success or negative error code on + * failure. + */ +static struct i2o_exec_wait *i2o_exec_wait_alloc(void) +{ + struct i2o_exec_wait *wait; + + wait = kmalloc(sizeof(*wait), GFP_KERNEL); + if (!wait) + return ERR_PTR(-ENOMEM); + + memset(wait, 0, sizeof(*wait)); + + INIT_LIST_HEAD(&wait->list); + + return wait; +}; + +/** + * i2o_exec_wait_free - Free a i2o_exec_wait struct + * @i2o_exec_wait: I2O wait data which should be cleaned up + */ +static void i2o_exec_wait_free(struct i2o_exec_wait *wait) +{ + kfree(wait); +}; + +/** + * i2o_msg_post_wait_mem - Post and wait a message with DMA buffers + * @c: controller + * @m: message to post + * @timeout: time in seconds to wait + * @dma: i2o_dma struct of the DMA buffer to free on failure + * + * This API allows an OSM to post a message and then be told whether or + * not the system received a successful reply. If the message times out + * then the value '-ETIMEDOUT' is returned. This is a special case. In + * this situation the message may (should) complete at an indefinite time + * in the future. When it completes it will use the memory buffer + * attached to the request. If -ETIMEDOUT is returned then the memory + * buffer must not be freed. Instead the event completion will free them + * for you. In all other cases the buffer are your problem. + * + * Returns 0 on success or negative error code on failure. + */ +int i2o_msg_post_wait_mem(struct i2o_controller *c, u32 m, unsigned long + timeout, struct i2o_dma *dma) +{ + DECLARE_WAIT_QUEUE_HEAD(wq); + struct i2o_exec_wait *wait; + static u32 tcntxt = 0x80000000; + struct i2o_message __iomem *msg = c->in_queue.virt + m; + int rc = 0; + + wait = i2o_exec_wait_alloc(); + if (!wait) + return -ENOMEM; + + if (tcntxt == 0xffffffff) + tcntxt = 0x80000000; + + if (dma) + wait->dma = *dma; + + /* + * Fill in the message initiator context and transaction context. + * We will only use transaction contexts >= 0x80000000 for POST WAIT, + * so we could find a POST WAIT reply easier in the reply handler. + */ + writel(i2o_exec_driver.context, &msg->u.s.icntxt); + wait->tcntxt = tcntxt++; + writel(wait->tcntxt, &msg->u.s.tcntxt); + + /* + * Post the message to the controller. At some point later it will + * return. If we time out before it returns then complete will be zero. + */ + i2o_msg_post(c, m); + + if (!wait->complete) { + wait->wq = &wq; + /* + * we add elements add the head, because if a entry in the list + * will never be removed, we have to iterate over it every time + */ + list_add(&wait->list, &i2o_exec_wait_list); + + wait_event_interruptible_timeout(wq, wait->complete, + timeout * HZ); + + wait->wq = NULL; + } + + barrier(); + + if (wait->complete) { + if (readl(&wait->msg->body[0]) >> 24) + rc = readl(&wait->msg->body[0]) & 0xff; + i2o_flush_reply(c, wait->m); + i2o_exec_wait_free(wait); + } else { + /* + * We cannot remove it now. This is important. When it does + * terminate (which it must do if the controller has not + * died...) then it will otherwise scribble on stuff. + * + * FIXME: try abort message + */ + if (dma) + dma->virt = NULL; + + rc = -ETIMEDOUT; + } + + return rc; +}; + +/** + * i2o_msg_post_wait_complete - Reply to a i2o_msg_post request from IOP + * @c: I2O controller which answers + * @m: message id + * @msg: pointer to the I2O reply message + * + * This function is called in interrupt context only. If the reply reached + * before the timeout, the i2o_exec_wait struct is filled with the message + * and the task will be waked up. The task is now responsible for returning + * the message m back to the controller! If the message reaches us after + * the timeout clean up the i2o_exec_wait struct (including allocated + * DMA buffer). + * + * Return 0 on success and if the message m should not be given back to the + * I2O controller, or >0 on success and if the message should be given back + * afterwords. Returns negative error code on failure. In this case the + * message must also be given back to the controller. + */ +static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m, + struct i2o_message __iomem *msg) +{ + struct i2o_exec_wait *wait, *tmp; + static spinlock_t lock; + int rc = 1; + u32 context; + + spin_lock_init(&lock); + + context = readl(&msg->u.s.tcntxt); + + /* + * We need to search through the i2o_exec_wait_list to see if the given + * message is still outstanding. If not, it means that the IOP took + * longer to respond to the message than we had allowed and timer has + * already expired. Not much we can do about that except log it for + * debug purposes, increase timeout, and recompile. + */ + spin_lock(&lock); + list_for_each_entry_safe(wait, tmp, &i2o_exec_wait_list, list) { + if (wait->tcntxt == context) { + list_del(&wait->list); + + wait->m = m; + wait->msg = msg; + wait->complete = 1; + + barrier(); + + if (wait->wq) { + wake_up_interruptible(wait->wq); + rc = 0; + } else { + struct device *dev; + + dev = &c->pdev->dev; + + pr_debug("%s: timedout reply received!\n", + c->name); + i2o_dma_free(dev, &wait->dma); + i2o_exec_wait_free(wait); + rc = -1; + } + + spin_unlock(&lock); + + return rc; + } + } + + spin_unlock(&lock); + + pr_debug("%s: Bogus reply in POST WAIT (tr-context: %08x)!\n", c->name, + context); + + return -1; +}; + +/** + * i2o_exec_probe - Called if a new I2O device (executive class) appears + * @dev: I2O device which should be probed + * + * Registers event notification for every event from Executive device. The + * return is always 0, because we want all devices of class Executive. + * + * Returns 0 on success. + */ +static int i2o_exec_probe(struct device *dev) +{ + struct i2o_device *i2o_dev = to_i2o_device(dev); + + i2o_event_register(i2o_dev, &i2o_exec_driver, 0, 0xffffffff); + + i2o_dev->iop->exec = i2o_dev; + + return 0; +}; + +/** + * i2o_exec_remove - Called on I2O device removal + * @dev: I2O device which was removed + * + * Unregisters event notification from Executive I2O device. + * + * Returns 0 on success. + */ +static int i2o_exec_remove(struct device *dev) +{ + i2o_event_register(to_i2o_device(dev), &i2o_exec_driver, 0, 0); + + return 0; +}; + +/** + * i2o_exec_lct_modified - Called on LCT NOTIFY reply + * @c: I2O controller on which the LCT has modified + * + * This function handles asynchronus LCT NOTIFY replies. It parses the + * new LCT and if the buffer for the LCT was to small sends a LCT NOTIFY + * again. + */ +static void i2o_exec_lct_modified(struct i2o_controller *c) +{ + if (i2o_device_parse_lct(c) == -EAGAIN) + i2o_exec_lct_notify(c, 0); +}; + +/** + * i2o_exec_reply - I2O Executive reply handler + * @c: I2O controller from which the reply comes + * @m: message id + * @msg: pointer to the I2O reply message + * + * This function is always called from interrupt context. If a POST WAIT + * reply was received, pass it to the complete function. If a LCT NOTIFY + * reply was received, a new event is created to handle the update. + * + * Returns 0 on success and if the reply should not be flushed or > 0 + * on success and if the reply should be flushed. Returns negative error + * code on failure and if the reply should be flushed. + */ +static int i2o_exec_reply(struct i2o_controller *c, u32 m, + struct i2o_message *msg) +{ + if (le32_to_cpu(msg->u.head[0]) & MSG_FAIL) { // Fail bit is set + struct i2o_message __iomem *pmsg; /* preserved message */ + u32 pm; + + pm = le32_to_cpu(msg->body[3]); + + pmsg = i2o_msg_in_to_virt(c, pm); + + i2o_report_status(KERN_INFO, "i2o_core", msg); + + /* Release the preserved msg by resubmitting it as a NOP */ + i2o_msg_nop(c, pm); + + /* If reply to i2o_post_wait failed, return causes a timeout */ + return -1; + } + + if (le32_to_cpu(msg->u.s.tcntxt) & 0x80000000) + return i2o_msg_post_wait_complete(c, m, msg); + + if ((le32_to_cpu(msg->u.head[1]) >> 24) == I2O_CMD_LCT_NOTIFY) { + struct work_struct *work; + + pr_debug("%s: LCT notify received\n", c->name); + + work = kmalloc(sizeof(*work), GFP_ATOMIC); + if (!work) + return -ENOMEM; + + INIT_WORK(work, (void (*)(void *))i2o_exec_lct_modified, c); + queue_work(i2o_exec_driver.event_queue, work); + return 1; + } + + /* + * If this happens, we want to dump the message to the syslog so + * it can be sent back to the card manufacturer by the end user + * to aid in debugging. + * + */ + printk(KERN_WARNING "%s: Unsolicited message reply sent to core!" + "Message dumped to syslog\n", c->name); + i2o_dump_message(msg); + + return -EFAULT; +} + +/** + * i2o_exec_event - Event handling function + * @evt: Event which occurs + * + * Handles events send by the Executive device. At the moment does not do + * anything useful. + */ +static void i2o_exec_event(struct i2o_event *evt) +{ + osm_info("Event received from device: %d\n", + evt->i2o_dev->lct_data.tid); + kfree(evt); +}; + +/** + * i2o_exec_lct_get - Get the IOP's Logical Configuration Table + * @c: I2O controller from which the LCT should be fetched + * + * Send a LCT NOTIFY request to the controller, and wait + * I2O_TIMEOUT_LCT_GET seconds until arrival of response. If the LCT is + * to large, retry it. + * + * Returns 0 on success or negative error code on failure. + */ +int i2o_exec_lct_get(struct i2o_controller *c) +{ + struct i2o_message __iomem *msg; + u32 m; + int i = 0; + int rc = -EAGAIN; + + for (i = 1; i <= I2O_LCT_GET_TRIES; i++) { + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6, &msg->u.head[0]); + writel(I2O_CMD_LCT_NOTIFY << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + writel(0xffffffff, &msg->body[0]); + writel(0x00000000, &msg->body[1]); + writel(0xd0000000 | c->dlct.len, &msg->body[2]); + writel(c->dlct.phys, &msg->body[3]); + + rc = i2o_msg_post_wait(c, m, I2O_TIMEOUT_LCT_GET); + if (rc < 0) + break; + + rc = i2o_device_parse_lct(c); + if (rc != -EAGAIN) + break; + } + + return rc; +} + +/** + * i2o_exec_lct_notify - Send a asynchronus LCT NOTIFY request + * @c: I2O controller to which the request should be send + * @change_ind: change indicator + * + * This function sends a LCT NOTIFY request to the I2O controller with + * the change indicator change_ind. If the change_ind == 0 the controller + * replies immediately after the request. If change_ind > 0 the reply is + * send after change indicator of the LCT is > change_ind. + */ +static int i2o_exec_lct_notify(struct i2o_controller *c, u32 change_ind) +{ + i2o_status_block *sb = c->status_block.virt; + struct device *dev; + struct i2o_message __iomem *msg; + u32 m; + + dev = &c->pdev->dev; + + if (i2o_dma_realloc(dev, &c->dlct, sb->expected_lct_size, GFP_KERNEL)) + return -ENOMEM; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6, &msg->u.head[0]); + writel(I2O_CMD_LCT_NOTIFY << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + writel(i2o_exec_driver.context, &msg->u.s.icntxt); + writel(0, &msg->u.s.tcntxt); /* FIXME */ + writel(0xffffffff, &msg->body[0]); + writel(change_ind, &msg->body[1]); + writel(0xd0000000 | c->dlct.len, &msg->body[2]); + writel(c->dlct.phys, &msg->body[3]); + + i2o_msg_post(c, m); + + return 0; +}; + +/* Exec OSM driver struct */ +struct i2o_driver i2o_exec_driver = { + .name = OSM_NAME, + .reply = i2o_exec_reply, + .event = i2o_exec_event, + .classes = i2o_exec_class_id, + .driver = { + .probe = i2o_exec_probe, + .remove = i2o_exec_remove, + }, +}; + +/** + * i2o_exec_init - Registers the Exec OSM + * + * Registers the Exec OSM in the I2O core. + * + * Returns 0 on success or negative error code on failure. + */ +int __init i2o_exec_init(void) +{ + return i2o_driver_register(&i2o_exec_driver); +}; + +/** + * i2o_exec_exit - Removes the Exec OSM + * + * Unregisters the Exec OSM from the I2O core. + */ +void __exit i2o_exec_exit(void) +{ + i2o_driver_unregister(&i2o_exec_driver); +}; + +EXPORT_SYMBOL(i2o_msg_post_wait_mem); +EXPORT_SYMBOL(i2o_exec_lct_get); diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c new file mode 100644 index 000000000000..7b74c87b569e --- /dev/null +++ b/drivers/message/i2o/i2o_block.c @@ -0,0 +1,1247 @@ +/* + * Block OSM + * + * Copyright (C) 1999-2002 Red Hat Software + * + * Written by Alan Cox, Building Number Three Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * For the purpose of avoiding doubt the preferred form of the work + * for making modifications shall be a standards compliant form such + * gzipped tar and not one requiring a proprietary or patent encumbered + * tool to unpack. + * + * Fixes/additions: + * Steve Ralston: + * Multiple device handling error fixes, + * Added a queue depth. + * Alan Cox: + * FC920 has an rmw bug. Dont or in the end marker. + * Removed queue walk, fixed for 64bitness. + * Rewrote much of the code over time + * Added indirect block lists + * Handle 64K limits on many controllers + * Don't use indirects on the Promise (breaks) + * Heavily chop down the queue depths + * Deepak Saxena: + * Independent queues per IOP + * Support for dynamic device creation/deletion + * Code cleanup + * Support for larger I/Os through merge* functions + * (taken from DAC960 driver) + * Boji T Kannanthanam: + * Set the I2O Block devices to be detected in increasing + * order of TIDs during boot. + * Search and set the I2O block device that we boot off + * from as the first device to be claimed (as /dev/i2o/hda) + * Properly attach/detach I2O gendisk structure from the + * system gendisk list. The I2O block devices now appear in + * /proc/partitions. + * Markus Lidel <Markus.Lidel@shadowconnect.com>: + * Minor bugfixes for 2.6. + */ + +#include <linux/module.h> +#include <linux/i2o.h> + +#include <linux/mempool.h> + +#include <linux/genhd.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> + +#include "i2o_block.h" + +#define OSM_NAME "block-osm" +#define OSM_VERSION "$Rev$" +#define OSM_DESCRIPTION "I2O Block Device OSM" + +static struct i2o_driver i2o_block_driver; + +/* global Block OSM request mempool */ +static struct i2o_block_mempool i2o_blk_req_pool; + +/* Block OSM class handling definition */ +static struct i2o_class_id i2o_block_class_id[] = { + {I2O_CLASS_RANDOM_BLOCK_STORAGE}, + {I2O_CLASS_END} +}; + +/** + * i2o_block_device_free - free the memory of the I2O Block device + * @dev: I2O Block device, which should be cleaned up + * + * Frees the request queue, gendisk and the i2o_block_device structure. + */ +static void i2o_block_device_free(struct i2o_block_device *dev) +{ + blk_cleanup_queue(dev->gd->queue); + + put_disk(dev->gd); + + kfree(dev); +}; + +/** + * i2o_block_remove - remove the I2O Block device from the system again + * @dev: I2O Block device which should be removed + * + * Remove gendisk from system and free all allocated memory. + * + * Always returns 0. + */ +static int i2o_block_remove(struct device *dev) +{ + struct i2o_device *i2o_dev = to_i2o_device(dev); + struct i2o_block_device *i2o_blk_dev = dev_get_drvdata(dev); + + osm_info("Device removed %s\n", i2o_blk_dev->gd->disk_name); + + i2o_event_register(i2o_dev, &i2o_block_driver, 0, 0); + + del_gendisk(i2o_blk_dev->gd); + + dev_set_drvdata(dev, NULL); + + i2o_device_claim_release(i2o_dev); + + i2o_block_device_free(i2o_blk_dev); + + return 0; +}; + +/** + * i2o_block_device flush - Flush all dirty data of I2O device dev + * @dev: I2O device which should be flushed + * + * Flushes all dirty data on device dev. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_block_device_flush(struct i2o_device *dev) +{ + struct i2o_message __iomem *msg; + u32 m; + + m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_BLOCK_CFLUSH << 24 | HOST_TID << 12 | dev->lct_data.tid, + &msg->u.head[1]); + writel(60 << 16, &msg->body[0]); + osm_debug("Flushing...\n"); + + return i2o_msg_post_wait(dev->iop, m, 60); +}; + +/** + * i2o_block_device_mount - Mount (load) the media of device dev + * @dev: I2O device which should receive the mount request + * @media_id: Media Identifier + * + * Load a media into drive. Identifier should be set to -1, because the + * spec does not support any other value. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_block_device_mount(struct i2o_device *dev, u32 media_id) +{ + struct i2o_message __iomem *msg; + u32 m; + + m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_BLOCK_MMOUNT << 24 | HOST_TID << 12 | dev->lct_data.tid, + &msg->u.head[1]); + writel(-1, &msg->body[0]); + writel(0, &msg->body[1]); + osm_debug("Mounting...\n"); + + return i2o_msg_post_wait(dev->iop, m, 2); +}; + +/** + * i2o_block_device_lock - Locks the media of device dev + * @dev: I2O device which should receive the lock request + * @media_id: Media Identifier + * + * Lock media of device dev to prevent removal. The media identifier + * should be set to -1, because the spec does not support any other value. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_block_device_lock(struct i2o_device *dev, u32 media_id) +{ + struct i2o_message __iomem *msg; + u32 m; + + m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_BLOCK_MLOCK << 24 | HOST_TID << 12 | dev->lct_data.tid, + &msg->u.head[1]); + writel(-1, &msg->body[0]); + osm_debug("Locking...\n"); + + return i2o_msg_post_wait(dev->iop, m, 2); +}; + +/** + * i2o_block_device_unlock - Unlocks the media of device dev + * @dev: I2O device which should receive the unlocked request + * @media_id: Media Identifier + * + * Unlocks the media in device dev. The media identifier should be set to + * -1, because the spec does not support any other value. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_block_device_unlock(struct i2o_device *dev, u32 media_id) +{ + struct i2o_message __iomem *msg; + u32 m; + + m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_BLOCK_MUNLOCK << 24 | HOST_TID << 12 | dev->lct_data.tid, + &msg->u.head[1]); + writel(media_id, &msg->body[0]); + osm_debug("Unlocking...\n"); + + return i2o_msg_post_wait(dev->iop, m, 2); +}; + +/** + * i2o_block_device_power - Power management for device dev + * @dev: I2O device which should receive the power management request + * @operation: Operation which should be send + * + * Send a power management request to the device dev. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_block_device_power(struct i2o_block_device *dev, u8 op) +{ + struct i2o_device *i2o_dev = dev->i2o_dev; + struct i2o_controller *c = i2o_dev->iop; + struct i2o_message __iomem *msg; + u32 m; + int rc; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_BLOCK_POWER << 24 | HOST_TID << 12 | i2o_dev->lct_data. + tid, &msg->u.head[1]); + writel(op << 24, &msg->body[0]); + osm_debug("Power...\n"); + + rc = i2o_msg_post_wait(c, m, 60); + if (!rc) + dev->power = op; + + return rc; +}; + +/** + * i2o_block_request_alloc - Allocate an I2O block request struct + * + * Allocates an I2O block request struct and initialize the list. + * + * Returns a i2o_block_request pointer on success or negative error code + * on failure. + */ +static inline struct i2o_block_request *i2o_block_request_alloc(void) +{ + struct i2o_block_request *ireq; + + ireq = mempool_alloc(i2o_blk_req_pool.pool, GFP_ATOMIC); + if (!ireq) + return ERR_PTR(-ENOMEM); + + INIT_LIST_HEAD(&ireq->queue); + + return ireq; +}; + +/** + * i2o_block_request_free - Frees a I2O block request + * @ireq: I2O block request which should be freed + * + * Fres the allocated memory (give it back to the request mempool). + */ +static inline void i2o_block_request_free(struct i2o_block_request *ireq) +{ + mempool_free(ireq, i2o_blk_req_pool.pool); +}; + +/** + * i2o_block_sglist_alloc - Allocate the SG list and map it + * @ireq: I2O block request + * + * Builds the SG list and map it into to be accessable by the controller. + * + * Returns the number of elements in the SG list or 0 on failure. + */ +static inline int i2o_block_sglist_alloc(struct i2o_block_request *ireq) +{ + struct device *dev = &ireq->i2o_blk_dev->i2o_dev->iop->pdev->dev; + int nents; + + nents = blk_rq_map_sg(ireq->req->q, ireq->req, ireq->sg_table); + + if (rq_data_dir(ireq->req) == READ) + ireq->sg_dma_direction = PCI_DMA_FROMDEVICE; + else + ireq->sg_dma_direction = PCI_DMA_TODEVICE; + + ireq->sg_nents = dma_map_sg(dev, ireq->sg_table, nents, + ireq->sg_dma_direction); + + return ireq->sg_nents; +}; + +/** + * i2o_block_sglist_free - Frees the SG list + * @ireq: I2O block request from which the SG should be freed + * + * Frees the SG list from the I2O block request. + */ +static inline void i2o_block_sglist_free(struct i2o_block_request *ireq) +{ + struct device *dev = &ireq->i2o_blk_dev->i2o_dev->iop->pdev->dev; + + dma_unmap_sg(dev, ireq->sg_table, ireq->sg_nents, + ireq->sg_dma_direction); +}; + +/** + * i2o_block_prep_req_fn - Allocates I2O block device specific struct + * @q: request queue for the request + * @req: the request to prepare + * + * Allocate the necessary i2o_block_request struct and connect it to + * the request. This is needed that we not loose the SG list later on. + * + * Returns BLKPREP_OK on success or BLKPREP_DEFER on failure. + */ +static int i2o_block_prep_req_fn(struct request_queue *q, struct request *req) +{ + struct i2o_block_device *i2o_blk_dev = q->queuedata; + struct i2o_block_request *ireq; + + /* request is already processed by us, so return */ + if (req->flags & REQ_SPECIAL) { + osm_debug("REQ_SPECIAL already set!\n"); + req->flags |= REQ_DONTPREP; + return BLKPREP_OK; + } + + /* connect the i2o_block_request to the request */ + if (!req->special) { + ireq = i2o_block_request_alloc(); + if (unlikely(IS_ERR(ireq))) { + osm_debug("unable to allocate i2o_block_request!\n"); + return BLKPREP_DEFER; + } + + ireq->i2o_blk_dev = i2o_blk_dev; + req->special = ireq; + ireq->req = req; + } else + ireq = req->special; + + /* do not come back here */ + req->flags |= REQ_DONTPREP | REQ_SPECIAL; + + return BLKPREP_OK; +}; + +/** + * i2o_block_delayed_request_fn - delayed request queue function + * delayed_request: the delayed request with the queue to start + * + * If the request queue is stopped for a disk, and there is no open + * request, a new event is created, which calls this function to start + * the queue after I2O_BLOCK_REQUEST_TIME. Otherwise the queue will never + * be started again. + */ +static void i2o_block_delayed_request_fn(void *delayed_request) +{ + struct i2o_block_delayed_request *dreq = delayed_request; + struct request_queue *q = dreq->queue; + unsigned long flags; + + spin_lock_irqsave(q->queue_lock, flags); + blk_start_queue(q); + spin_unlock_irqrestore(q->queue_lock, flags); + kfree(dreq); +}; + +/** + * i2o_block_reply - Block OSM reply handler. + * @c: I2O controller from which the message arrives + * @m: message id of reply + * qmsg: the actuall I2O message reply + * + * This function gets all the message replies. + * + */ +static int i2o_block_reply(struct i2o_controller *c, u32 m, + struct i2o_message *msg) +{ + struct i2o_block_request *ireq; + struct request *req; + struct i2o_block_device *dev; + struct request_queue *q; + u8 st; + unsigned long flags; + + /* FAILed message */ + if (unlikely(le32_to_cpu(msg->u.head[0]) & (1 << 13))) { + struct i2o_message *pmsg; + u32 pm; + + /* + * FAILed message from controller + * We increment the error count and abort it + * + * In theory this will never happen. The I2O block class + * specification states that block devices never return + * FAILs but instead use the REQ status field...but + * better be on the safe side since no one really follows + * the spec to the book :) + */ + pm = le32_to_cpu(msg->body[3]); + pmsg = i2o_msg_in_to_virt(c, pm); + + req = i2o_cntxt_list_get(c, le32_to_cpu(pmsg->u.s.tcntxt)); + if (unlikely(!req)) { + osm_err("NULL reply received!\n"); + return -1; + } + + ireq = req->special; + dev = ireq->i2o_blk_dev; + q = dev->gd->queue; + + req->errors++; + + spin_lock_irqsave(q->queue_lock, flags); + + while (end_that_request_chunk(req, !req->errors, + le32_to_cpu(pmsg->body[1]))) ; + end_that_request_last(req); + + dev->open_queue_depth--; + list_del(&ireq->queue); + blk_start_queue(q); + + spin_unlock_irqrestore(q->queue_lock, flags); + + /* Now flush the message by making it a NOP */ + i2o_msg_nop(c, pm); + + return -1; + } + + req = i2o_cntxt_list_get(c, le32_to_cpu(msg->u.s.tcntxt)); + if (unlikely(!req)) { + osm_err("NULL reply received!\n"); + return -1; + } + + ireq = req->special; + dev = ireq->i2o_blk_dev; + q = dev->gd->queue; + + if (unlikely(!dev->i2o_dev)) { + /* + * This is HACK, but Intel Integrated RAID allows user + * to delete a volume that is claimed, locked, and in use + * by the OS. We have to check for a reply from a + * non-existent device and flag it as an error or the system + * goes kaput... + */ + req->errors++; + osm_warn("Data transfer to deleted device!\n"); + spin_lock_irqsave(q->queue_lock, flags); + while (end_that_request_chunk + (req, !req->errors, le32_to_cpu(msg->body[1]))) ; + end_that_request_last(req); + + dev->open_queue_depth--; + list_del(&ireq->queue); + blk_start_queue(q); + + spin_unlock_irqrestore(q->queue_lock, flags); + return -1; + } + + /* + * Lets see what is cooking. We stuffed the + * request in the context. + */ + + st = le32_to_cpu(msg->body[0]) >> 24; + + if (st != 0) { + int err; + char *bsa_errors[] = { + "Success", + "Media Error", + "Failure communicating to device", + "Device Failure", + "Device is not ready", + "Media not present", + "Media is locked by another user", + "Media has failed", + "Failure communicating to device", + "Device bus failure", + "Device is locked by another user", + "Device is write protected", + "Device has reset", + "Volume has changed, waiting for acknowledgement" + }; + + err = le32_to_cpu(msg->body[0]) & 0xffff; + + /* + * Device not ready means two things. One is that the + * the thing went offline (but not a removal media) + * + * The second is that you have a SuperTrak 100 and the + * firmware got constipated. Unlike standard i2o card + * setups the supertrak returns an error rather than + * blocking for the timeout in these cases. + * + * Don't stick a supertrak100 into cache aggressive modes + */ + + osm_err("block-osm: /dev/%s error: %s", dev->gd->disk_name, + bsa_errors[le32_to_cpu(msg->body[0]) & 0xffff]); + if (le32_to_cpu(msg->body[0]) & 0x00ff0000) + printk(KERN_ERR " - DDM attempted %d retries", + (le32_to_cpu(msg->body[0]) >> 16) & 0x00ff); + printk(KERN_ERR ".\n"); + req->errors++; + } else + req->errors = 0; + + if (!end_that_request_chunk + (req, !req->errors, le32_to_cpu(msg->body[1]))) { + add_disk_randomness(req->rq_disk); + spin_lock_irqsave(q->queue_lock, flags); + + end_that_request_last(req); + + dev->open_queue_depth--; + list_del(&ireq->queue); + blk_start_queue(q); + + spin_unlock_irqrestore(q->queue_lock, flags); + + i2o_block_sglist_free(ireq); + i2o_block_request_free(ireq); + } else + osm_err("still remaining chunks\n"); + + return 1; +}; + +static void i2o_block_event(struct i2o_event *evt) +{ + osm_info("block-osm: event received\n"); +}; + +/* + * SCSI-CAM for ioctl geometry mapping + * Duplicated with SCSI - this should be moved into somewhere common + * perhaps genhd ? + * + * LBA -> CHS mapping table taken from: + * + * "Incorporating the I2O Architecture into BIOS for Intel Architecture + * Platforms" + * + * This is an I2O document that is only available to I2O members, + * not developers. + * + * From my understanding, this is how all the I2O cards do this + * + * Disk Size | Sectors | Heads | Cylinders + * ---------------+---------+-------+------------------- + * 1 < X <= 528M | 63 | 16 | X/(63 * 16 * 512) + * 528M < X <= 1G | 63 | 32 | X/(63 * 32 * 512) + * 1 < X <528M | 63 | 16 | X/(63 * 16 * 512) + * 1 < X <528M | 63 | 16 | X/(63 * 16 * 512) + * + */ +#define BLOCK_SIZE_528M 1081344 +#define BLOCK_SIZE_1G 2097152 +#define BLOCK_SIZE_21G 4403200 +#define BLOCK_SIZE_42G 8806400 +#define BLOCK_SIZE_84G 17612800 + +static void i2o_block_biosparam(unsigned long capacity, unsigned short *cyls, + unsigned char *hds, unsigned char *secs) +{ + unsigned long heads, sectors, cylinders; + + sectors = 63L; /* Maximize sectors per track */ + if (capacity <= BLOCK_SIZE_528M) + heads = 16; + else if (capacity <= BLOCK_SIZE_1G) + heads = 32; + else if (capacity <= BLOCK_SIZE_21G) + heads = 64; + else if (capacity <= BLOCK_SIZE_42G) + heads = 128; + else + heads = 255; + + cylinders = (unsigned long)capacity / (heads * sectors); + + *cyls = (unsigned short)cylinders; /* Stuff return values */ + *secs = (unsigned char)sectors; + *hds = (unsigned char)heads; +} + +/** + * i2o_block_open - Open the block device + * + * Power up the device, mount and lock the media. This function is called, + * if the block device is opened for access. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_block_open(struct inode *inode, struct file *file) +{ + struct i2o_block_device *dev = inode->i_bdev->bd_disk->private_data; + + if (!dev->i2o_dev) + return -ENODEV; + + if (dev->power > 0x1f) + i2o_block_device_power(dev, 0x02); + + i2o_block_device_mount(dev->i2o_dev, -1); + + i2o_block_device_lock(dev->i2o_dev, -1); + + osm_debug("Ready.\n"); + + return 0; +}; + +/** + * i2o_block_release - Release the I2O block device + * + * Unlock and unmount the media, and power down the device. Gets called if + * the block device is closed. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_block_release(struct inode *inode, struct file *file) +{ + struct gendisk *disk = inode->i_bdev->bd_disk; + struct i2o_block_device *dev = disk->private_data; + u8 operation; + + /* + * This is to deail with the case of an application + * opening a device and then the device dissapears while + * it's in use, and then the application tries to release + * it. ex: Unmounting a deleted RAID volume at reboot. + * If we send messages, it will just cause FAILs since + * the TID no longer exists. + */ + if (!dev->i2o_dev) + return 0; + + i2o_block_device_flush(dev->i2o_dev); + + i2o_block_device_unlock(dev->i2o_dev, -1); + + if (dev->flags & (1 << 3 | 1 << 4)) /* Removable */ + operation = 0x21; + else + operation = 0x24; + + i2o_block_device_power(dev, operation); + + return 0; +} + +/** + * i2o_block_ioctl - Issue device specific ioctl calls. + * @cmd: ioctl command + * @arg: arg + * + * Handles ioctl request for the block device. + * + * Return 0 on success or negative error on failure. + */ +static int i2o_block_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct gendisk *disk = inode->i_bdev->bd_disk; + struct i2o_block_device *dev = disk->private_data; + void __user *argp = (void __user *)arg; + + /* Anyone capable of this syscall can do *real bad* things */ + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + switch (cmd) { + case HDIO_GETGEO: + { + struct hd_geometry g; + i2o_block_biosparam(get_capacity(disk), + &g.cylinders, &g.heads, &g.sectors); + g.start = get_start_sect(inode->i_bdev); + return copy_to_user(argp, &g, sizeof(g)) ? -EFAULT : 0; + } + + case BLKI2OGRSTRAT: + return put_user(dev->rcache, (int __user *)arg); + case BLKI2OGWSTRAT: + return put_user(dev->wcache, (int __user *)arg); + case BLKI2OSRSTRAT: + if (arg < 0 || arg > CACHE_SMARTFETCH) + return -EINVAL; + dev->rcache = arg; + break; + case BLKI2OSWSTRAT: + if (arg != 0 + && (arg < CACHE_WRITETHROUGH || arg > CACHE_SMARTBACK)) + return -EINVAL; + dev->wcache = arg; + break; + } + return -ENOTTY; +}; + +/** + * i2o_block_media_changed - Have we seen a media change? + * @disk: gendisk which should be verified + * + * Verifies if the media has changed. + * + * Returns 1 if the media was changed or 0 otherwise. + */ +static int i2o_block_media_changed(struct gendisk *disk) +{ + struct i2o_block_device *p = disk->private_data; + + if (p->media_change_flag) { + p->media_change_flag = 0; + return 1; + } + return 0; +} + +/** + * i2o_block_transfer - Transfer a request to/from the I2O controller + * @req: the request which should be transfered + * + * This function converts the request into a I2O message. The necessary + * DMA buffers are allocated and after everything is setup post the message + * to the I2O controller. No cleanup is done by this function. It is done + * on the interrupt side when the reply arrives. + * + * Return 0 on success or negative error code on failure. + */ +static int i2o_block_transfer(struct request *req) +{ + struct i2o_block_device *dev = req->rq_disk->private_data; + struct i2o_controller *c = dev->i2o_dev->iop; + int tid = dev->i2o_dev->lct_data.tid; + struct i2o_message __iomem *msg; + void __iomem *mptr; + struct i2o_block_request *ireq = req->special; + struct scatterlist *sg; + int sgnum; + int i; + u32 m; + u32 tcntxt; + u32 sg_flags; + int rc; + + m = i2o_msg_get(c, &msg); + if (m == I2O_QUEUE_EMPTY) { + rc = -EBUSY; + goto exit; + } + + tcntxt = i2o_cntxt_list_add(c, req); + if (!tcntxt) { + rc = -ENOMEM; + goto nop_msg; + } + + if ((sgnum = i2o_block_sglist_alloc(ireq)) <= 0) { + rc = -ENOMEM; + goto context_remove; + } + + /* Build the message based on the request. */ + writel(i2o_block_driver.context, &msg->u.s.icntxt); + writel(tcntxt, &msg->u.s.tcntxt); + writel(req->nr_sectors << 9, &msg->body[1]); + + writel((((u64) req->sector) << 9) & 0xffffffff, &msg->body[2]); + writel(req->sector >> 23, &msg->body[3]); + + mptr = &msg->body[4]; + + sg = ireq->sg_table; + + if (rq_data_dir(req) == READ) { + writel(I2O_CMD_BLOCK_READ << 24 | HOST_TID << 12 | tid, + &msg->u.head[1]); + sg_flags = 0x10000000; + switch (dev->rcache) { + case CACHE_NULL: + writel(0, &msg->body[0]); + break; + case CACHE_PREFETCH: + writel(0x201F0008, &msg->body[0]); + break; + case CACHE_SMARTFETCH: + if (req->nr_sectors > 16) + writel(0x201F0008, &msg->body[0]); + else + writel(0x001F0000, &msg->body[0]); + break; + } + } else { + writel(I2O_CMD_BLOCK_WRITE << 24 | HOST_TID << 12 | tid, + &msg->u.head[1]); + sg_flags = 0x14000000; + switch (dev->wcache) { + case CACHE_NULL: + writel(0, &msg->body[0]); + break; + case CACHE_WRITETHROUGH: + writel(0x001F0008, &msg->body[0]); + break; + case CACHE_WRITEBACK: + writel(0x001F0010, &msg->body[0]); + break; + case CACHE_SMARTBACK: + if (req->nr_sectors > 16) + writel(0x001F0004, &msg->body[0]); + else + writel(0x001F0010, &msg->body[0]); + break; + case CACHE_SMARTTHROUGH: + if (req->nr_sectors > 16) + writel(0x001F0004, &msg->body[0]); + else + writel(0x001F0010, &msg->body[0]); + } + } + + for (i = sgnum; i > 0; i--) { + if (i == 1) + sg_flags |= 0x80000000; + writel(sg_flags | sg_dma_len(sg), mptr); + writel(sg_dma_address(sg), mptr + 4); + mptr += 8; + sg++; + } + + writel(I2O_MESSAGE_SIZE + (((unsigned long)mptr - + (unsigned long)&msg->u.head[0]) >> 2) | SGL_OFFSET_8, + &msg->u.head[0]); + + list_add_tail(&ireq->queue, &dev->open_queue); + dev->open_queue_depth++; + + i2o_msg_post(c, m); + + return 0; + + context_remove: + i2o_cntxt_list_remove(c, req); + + nop_msg: + i2o_msg_nop(c, m); + + exit: + return rc; +}; + +/** + * i2o_block_request_fn - request queue handling function + * q: request queue from which the request could be fetched + * + * Takes the next request from the queue, transfers it and if no error + * occurs dequeue it from the queue. On arrival of the reply the message + * will be processed further. If an error occurs requeue the request. + */ +static void i2o_block_request_fn(struct request_queue *q) +{ + struct request *req; + + while (!blk_queue_plugged(q)) { + req = elv_next_request(q); + if (!req) + break; + + if (blk_fs_request(req)) { + struct i2o_block_delayed_request *dreq; + struct i2o_block_request *ireq = req->special; + unsigned int queue_depth; + + queue_depth = ireq->i2o_blk_dev->open_queue_depth; + + if (queue_depth < I2O_BLOCK_MAX_OPEN_REQUESTS) + if (!i2o_block_transfer(req)) { + blkdev_dequeue_request(req); + continue; + } + + if (queue_depth) + break; + + /* stop the queue and retry later */ + dreq = kmalloc(sizeof(*dreq), GFP_ATOMIC); + if (!dreq) + continue; + + dreq->queue = q; + INIT_WORK(&dreq->work, i2o_block_delayed_request_fn, + dreq); + + osm_info("transfer error\n"); + if (!queue_delayed_work(i2o_block_driver.event_queue, + &dreq->work, + I2O_BLOCK_RETRY_TIME)) + kfree(dreq); + else { + blk_stop_queue(q); + break; + } + } else + end_request(req, 0); + } +}; + +/* I2O Block device operations definition */ +static struct block_device_operations i2o_block_fops = { + .owner = THIS_MODULE, + .open = i2o_block_open, + .release = i2o_block_release, + .ioctl = i2o_block_ioctl, + .media_changed = i2o_block_media_changed +}; + +/** + * i2o_block_device_alloc - Allocate memory for a I2O Block device + * + * Allocate memory for the i2o_block_device struct, gendisk and request + * queue and initialize them as far as no additional information is needed. + * + * Returns a pointer to the allocated I2O Block device on succes or a + * negative error code on failure. + */ +static struct i2o_block_device *i2o_block_device_alloc(void) +{ + struct i2o_block_device *dev; + struct gendisk *gd; + struct request_queue *queue; + int rc; + + dev = kmalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + osm_err("Insufficient memory to allocate I2O Block disk.\n"); + rc = -ENOMEM; + goto exit; + } + memset(dev, 0, sizeof(*dev)); + + INIT_LIST_HEAD(&dev->open_queue); + spin_lock_init(&dev->lock); + dev->rcache = CACHE_PREFETCH; + dev->wcache = CACHE_WRITEBACK; + + /* allocate a gendisk with 16 partitions */ + gd = alloc_disk(16); + if (!gd) { + osm_err("Insufficient memory to allocate gendisk.\n"); + rc = -ENOMEM; + goto cleanup_dev; + } + + /* initialize the request queue */ + queue = blk_init_queue(i2o_block_request_fn, &dev->lock); + if (!queue) { + osm_err("Insufficient memory to allocate request queue.\n"); + rc = -ENOMEM; + goto cleanup_queue; + } + + blk_queue_prep_rq(queue, i2o_block_prep_req_fn); + + gd->major = I2O_MAJOR; + gd->queue = queue; + gd->fops = &i2o_block_fops; + gd->private_data = dev; + + dev->gd = gd; + + return dev; + + cleanup_queue: + put_disk(gd); + + cleanup_dev: + kfree(dev); + + exit: + return ERR_PTR(rc); +}; + +/** + * i2o_block_probe - verify if dev is a I2O Block device and install it + * @dev: device to verify if it is a I2O Block device + * + * We only verify if the user_tid of the device is 0xfff and then install + * the device. Otherwise it is used by some other device (e. g. RAID). + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_block_probe(struct device *dev) +{ + struct i2o_device *i2o_dev = to_i2o_device(dev); + struct i2o_block_device *i2o_blk_dev; + struct i2o_controller *c = i2o_dev->iop; + struct gendisk *gd; + struct request_queue *queue; + static int unit = 0; + int rc; + u64 size; + u32 blocksize; + u16 power; + u32 flags, status; + int segments; + + /* skip devices which are used by IOP */ + if (i2o_dev->lct_data.user_tid != 0xfff) { + osm_debug("skipping used device %03x\n", i2o_dev->lct_data.tid); + return -ENODEV; + } + + osm_info("New device detected (TID: %03x)\n", i2o_dev->lct_data.tid); + + if (i2o_device_claim(i2o_dev)) { + osm_warn("Unable to claim device. Installation aborted\n"); + rc = -EFAULT; + goto exit; + } + + i2o_blk_dev = i2o_block_device_alloc(); + if (IS_ERR(i2o_blk_dev)) { + osm_err("could not alloc a new I2O block device"); + rc = PTR_ERR(i2o_blk_dev); + goto claim_release; + } + + i2o_blk_dev->i2o_dev = i2o_dev; + dev_set_drvdata(dev, i2o_blk_dev); + + /* setup gendisk */ + gd = i2o_blk_dev->gd; + gd->first_minor = unit << 4; + sprintf(gd->disk_name, "i2o/hd%c", 'a' + unit); + sprintf(gd->devfs_name, "i2o/hd%c", 'a' + unit); + gd->driverfs_dev = &i2o_dev->device; + + /* setup request queue */ + queue = gd->queue; + queue->queuedata = i2o_blk_dev; + + blk_queue_max_phys_segments(queue, I2O_MAX_SEGMENTS); + blk_queue_max_sectors(queue, I2O_MAX_SECTORS); + + if (c->short_req) + segments = 8; + else { + i2o_status_block *sb; + + sb = c->status_block.virt; + + segments = (sb->inbound_frame_size - + sizeof(struct i2o_message) / 4 - 4) / 2; + } + + blk_queue_max_hw_segments(queue, segments); + + osm_debug("max sectors = %d\n", I2O_MAX_SECTORS); + osm_debug("phys segments = %d\n", I2O_MAX_SEGMENTS); + osm_debug("hw segments = %d\n", segments); + + /* + * Ask for the current media data. If that isn't supported + * then we ask for the device capacity data + */ + if (i2o_parm_field_get(i2o_dev, 0x0004, 1, &blocksize, 4) != 0 + || i2o_parm_field_get(i2o_dev, 0x0004, 0, &size, 8) != 0) { + i2o_parm_field_get(i2o_dev, 0x0000, 3, &blocksize, 4); + i2o_parm_field_get(i2o_dev, 0x0000, 4, &size, 8); + } + osm_debug("blocksize = %d\n", blocksize); + + if (i2o_parm_field_get(i2o_dev, 0x0000, 2, &power, 2)) + power = 0; + i2o_parm_field_get(i2o_dev, 0x0000, 5, &flags, 4); + i2o_parm_field_get(i2o_dev, 0x0000, 6, &status, 4); + + set_capacity(gd, size >> 9); + + i2o_event_register(i2o_dev, &i2o_block_driver, 0, 0xffffffff); + + add_disk(gd); + + unit++; + + return 0; + + claim_release: + i2o_device_claim_release(i2o_dev); + + exit: + return rc; +}; + +/* Block OSM driver struct */ +static struct i2o_driver i2o_block_driver = { + .name = OSM_NAME, + .event = i2o_block_event, + .reply = i2o_block_reply, + .classes = i2o_block_class_id, + .driver = { + .probe = i2o_block_probe, + .remove = i2o_block_remove, + }, +}; + +/** + * i2o_block_init - Block OSM initialization function + * + * Allocate the slab and mempool for request structs, registers i2o_block + * block device and finally register the Block OSM in the I2O core. + * + * Returns 0 on success or negative error code on failure. + */ +static int __init i2o_block_init(void) +{ + int rc; + int size; + + printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); + + /* Allocate request mempool and slab */ + size = sizeof(struct i2o_block_request); + i2o_blk_req_pool.slab = kmem_cache_create("i2o_block_req", size, 0, + SLAB_HWCACHE_ALIGN, NULL, + NULL); + if (!i2o_blk_req_pool.slab) { + osm_err("can't init request slab\n"); + rc = -ENOMEM; + goto exit; + } + + i2o_blk_req_pool.pool = mempool_create(I2O_REQ_MEMPOOL_SIZE, + mempool_alloc_slab, + mempool_free_slab, + i2o_blk_req_pool.slab); + if (!i2o_blk_req_pool.pool) { + osm_err("can't init request mempool\n"); + rc = -ENOMEM; + goto free_slab; + } + + /* Register the block device interfaces */ + rc = register_blkdev(I2O_MAJOR, "i2o_block"); + if (rc) { + osm_err("unable to register block device\n"); + goto free_mempool; + } +#ifdef MODULE + osm_info("registered device at major %d\n", I2O_MAJOR); +#endif + + /* Register Block OSM into I2O core */ + rc = i2o_driver_register(&i2o_block_driver); + if (rc) { + osm_err("Could not register Block driver\n"); + goto unregister_blkdev; + } + + return 0; + + unregister_blkdev: + unregister_blkdev(I2O_MAJOR, "i2o_block"); + + free_mempool: + mempool_destroy(i2o_blk_req_pool.pool); + + free_slab: + kmem_cache_destroy(i2o_blk_req_pool.slab); + + exit: + return rc; +}; + +/** + * i2o_block_exit - Block OSM exit function + * + * Unregisters Block OSM from I2O core, unregisters i2o_block block device + * and frees the mempool and slab. + */ +static void __exit i2o_block_exit(void) +{ + /* Unregister I2O Block OSM from I2O core */ + i2o_driver_unregister(&i2o_block_driver); + + /* Unregister block device */ + unregister_blkdev(I2O_MAJOR, "i2o_block"); + + /* Free request mempool and slab */ + mempool_destroy(i2o_blk_req_pool.pool); + kmem_cache_destroy(i2o_blk_req_pool.slab); +}; + +MODULE_AUTHOR("Red Hat"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(OSM_DESCRIPTION); +MODULE_VERSION(OSM_VERSION); + +module_init(i2o_block_init); +module_exit(i2o_block_exit); diff --git a/drivers/message/i2o/i2o_block.h b/drivers/message/i2o/i2o_block.h new file mode 100644 index 000000000000..ddd9a15679c0 --- /dev/null +++ b/drivers/message/i2o/i2o_block.h @@ -0,0 +1,99 @@ +/* + * Block OSM structures/API + * + * Copyright (C) 1999-2002 Red Hat Software + * + * Written by Alan Cox, Building Number Three Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * For the purpose of avoiding doubt the preferred form of the work + * for making modifications shall be a standards compliant form such + * gzipped tar and not one requiring a proprietary or patent encumbered + * tool to unpack. + * + * Fixes/additions: + * Steve Ralston: + * Multiple device handling error fixes, + * Added a queue depth. + * Alan Cox: + * FC920 has an rmw bug. Dont or in the end marker. + * Removed queue walk, fixed for 64bitness. + * Rewrote much of the code over time + * Added indirect block lists + * Handle 64K limits on many controllers + * Don't use indirects on the Promise (breaks) + * Heavily chop down the queue depths + * Deepak Saxena: + * Independent queues per IOP + * Support for dynamic device creation/deletion + * Code cleanup + * Support for larger I/Os through merge* functions + * (taken from DAC960 driver) + * Boji T Kannanthanam: + * Set the I2O Block devices to be detected in increasing + * order of TIDs during boot. + * Search and set the I2O block device that we boot off + * from as the first device to be claimed (as /dev/i2o/hda) + * Properly attach/detach I2O gendisk structure from the + * system gendisk list. The I2O block devices now appear in + * /proc/partitions. + * Markus Lidel <Markus.Lidel@shadowconnect.com>: + * Minor bugfixes for 2.6. + */ + +#ifndef I2O_BLOCK_OSM_H +#define I2O_BLOCK_OSM_H + +#define I2O_BLOCK_RETRY_TIME HZ/4 +#define I2O_BLOCK_MAX_OPEN_REQUESTS 50 + +/* I2O Block OSM mempool struct */ +struct i2o_block_mempool { + kmem_cache_t *slab; + mempool_t *pool; +}; + +/* I2O Block device descriptor */ +struct i2o_block_device { + struct i2o_device *i2o_dev; /* pointer to I2O device */ + struct gendisk *gd; + spinlock_t lock; /* queue lock */ + struct list_head open_queue; /* list of transfered, but unfinished + requests */ + unsigned int open_queue_depth; /* number of requests in the queue */ + + int rcache; /* read cache flags */ + int wcache; /* write cache flags */ + int flags; + int power; /* power state */ + int media_change_flag; /* media changed flag */ +}; + +/* I2O Block device request */ +struct i2o_block_request +{ + struct list_head queue; + struct request *req; /* corresponding request */ + struct i2o_block_device *i2o_blk_dev; /* I2O block device */ + int sg_dma_direction; /* direction of DMA buffer read/write */ + int sg_nents; /* number of SG elements */ + struct scatterlist sg_table[I2O_MAX_SEGMENTS]; /* SG table */ +}; + +/* I2O Block device delayed request */ +struct i2o_block_delayed_request +{ + struct work_struct work; + struct request_queue *queue; +}; + +#endif diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c new file mode 100644 index 000000000000..5fc5004ea07a --- /dev/null +++ b/drivers/message/i2o/i2o_config.c @@ -0,0 +1,1160 @@ +/* + * I2O Configuration Interface Driver + * + * (C) Copyright 1999-2002 Red Hat + * + * Written by Alan Cox, Building Number Three Ltd + * + * Fixes/additions: + * Deepak Saxena (04/20/1999): + * Added basic ioctl() support + * Deepak Saxena (06/07/1999): + * Added software download ioctl (still testing) + * Auvo Häkkinen (09/10/1999): + * Changes to i2o_cfg_reply(), ioctl_parms() + * Added ioct_validate() + * Taneli Vähäkangas (09/30/1999): + * Fixed ioctl_swdl() + * Taneli Vähäkangas (10/04/1999): + * Changed ioctl_swdl(), implemented ioctl_swul() and ioctl_swdel() + * Deepak Saxena (11/18/1999): + * Added event managmenet support + * Alan Cox <alan@redhat.com>: + * 2.4 rewrite ported to 2.5 + * Markus Lidel <Markus.Lidel@shadowconnect.com>: + * Added pass-thru support for Adaptec's raidutils + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/i2o.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/miscdevice.h> +#include <linux/mm.h> +#include <linux/spinlock.h> +#include <linux/smp_lock.h> +#include <linux/ioctl32.h> +#include <linux/compat.h> +#include <linux/syscalls.h> + +#include <asm/uaccess.h> +#include <asm/io.h> + +#define OSM_NAME "config-osm" +#define OSM_VERSION "$Rev$" +#define OSM_DESCRIPTION "I2O Configuration OSM" + +extern int i2o_parm_issue(struct i2o_device *, int, void *, int, void *, int); + +static spinlock_t i2o_config_lock; + +#define MODINC(x,y) ((x) = ((x) + 1) % (y)) + +struct sg_simple_element { + u32 flag_count; + u32 addr_bus; +}; + +struct i2o_cfg_info { + struct file *fp; + struct fasync_struct *fasync; + struct i2o_evt_info event_q[I2O_EVT_Q_LEN]; + u16 q_in; // Queue head index + u16 q_out; // Queue tail index + u16 q_len; // Queue length + u16 q_lost; // Number of lost events + ulong q_id; // Event queue ID...used as tx_context + struct i2o_cfg_info *next; +}; +static struct i2o_cfg_info *open_files = NULL; +static ulong i2o_cfg_info_id = 0; + +/* + * Each of these describes an i2o message handler. They are + * multiplexed by the i2o_core code + */ + +static struct i2o_driver i2o_config_driver = { + .name = OSM_NAME +}; + +static int i2o_cfg_getiops(unsigned long arg) +{ + struct i2o_controller *c; + u8 __user *user_iop_table = (void __user *)arg; + u8 tmp[MAX_I2O_CONTROLLERS]; + int ret = 0; + + memset(tmp, 0, MAX_I2O_CONTROLLERS); + + list_for_each_entry(c, &i2o_controllers, list) + tmp[c->unit] = 1; + + if (copy_to_user(user_iop_table, tmp, MAX_I2O_CONTROLLERS)) + ret = -EFAULT; + + return ret; +}; + +static int i2o_cfg_gethrt(unsigned long arg) +{ + struct i2o_controller *c; + struct i2o_cmd_hrtlct __user *cmd = (struct i2o_cmd_hrtlct __user *)arg; + struct i2o_cmd_hrtlct kcmd; + i2o_hrt *hrt; + int len; + u32 reslen; + int ret = 0; + + if (copy_from_user(&kcmd, cmd, sizeof(struct i2o_cmd_hrtlct))) + return -EFAULT; + + if (get_user(reslen, kcmd.reslen) < 0) + return -EFAULT; + + if (kcmd.resbuf == NULL) + return -EFAULT; + + c = i2o_find_iop(kcmd.iop); + if (!c) + return -ENXIO; + + hrt = (i2o_hrt *) c->hrt.virt; + + len = 8 + ((hrt->entry_len * hrt->num_entries) << 2); + + /* We did a get user...so assuming mem is ok...is this bad? */ + put_user(len, kcmd.reslen); + if (len > reslen) + ret = -ENOBUFS; + if (copy_to_user(kcmd.resbuf, (void *)hrt, len)) + ret = -EFAULT; + + return ret; +}; + +static int i2o_cfg_getlct(unsigned long arg) +{ + struct i2o_controller *c; + struct i2o_cmd_hrtlct __user *cmd = (struct i2o_cmd_hrtlct __user *)arg; + struct i2o_cmd_hrtlct kcmd; + i2o_lct *lct; + int len; + int ret = 0; + u32 reslen; + + if (copy_from_user(&kcmd, cmd, sizeof(struct i2o_cmd_hrtlct))) + return -EFAULT; + + if (get_user(reslen, kcmd.reslen) < 0) + return -EFAULT; + + if (kcmd.resbuf == NULL) + return -EFAULT; + + c = i2o_find_iop(kcmd.iop); + if (!c) + return -ENXIO; + + lct = (i2o_lct *) c->lct; + + len = (unsigned int)lct->table_size << 2; + put_user(len, kcmd.reslen); + if (len > reslen) + ret = -ENOBUFS; + else if (copy_to_user(kcmd.resbuf, lct, len)) + ret = -EFAULT; + + return ret; +}; + +static int i2o_cfg_parms(unsigned long arg, unsigned int type) +{ + int ret = 0; + struct i2o_controller *c; + struct i2o_device *dev; + struct i2o_cmd_psetget __user *cmd = + (struct i2o_cmd_psetget __user *)arg; + struct i2o_cmd_psetget kcmd; + u32 reslen; + u8 *ops; + u8 *res; + int len = 0; + + u32 i2o_cmd = (type == I2OPARMGET ? + I2O_CMD_UTIL_PARAMS_GET : I2O_CMD_UTIL_PARAMS_SET); + + if (copy_from_user(&kcmd, cmd, sizeof(struct i2o_cmd_psetget))) + return -EFAULT; + + if (get_user(reslen, kcmd.reslen)) + return -EFAULT; + + c = i2o_find_iop(kcmd.iop); + if (!c) + return -ENXIO; + + dev = i2o_iop_find_device(c, kcmd.tid); + if (!dev) + return -ENXIO; + + ops = (u8 *) kmalloc(kcmd.oplen, GFP_KERNEL); + if (!ops) + return -ENOMEM; + + if (copy_from_user(ops, kcmd.opbuf, kcmd.oplen)) { + kfree(ops); + return -EFAULT; + } + + /* + * It's possible to have a _very_ large table + * and that the user asks for all of it at once... + */ + res = (u8 *) kmalloc(65536, GFP_KERNEL); + if (!res) { + kfree(ops); + return -ENOMEM; + } + + len = i2o_parm_issue(dev, i2o_cmd, ops, kcmd.oplen, res, 65536); + kfree(ops); + + if (len < 0) { + kfree(res); + return -EAGAIN; + } + + put_user(len, kcmd.reslen); + if (len > reslen) + ret = -ENOBUFS; + else if (copy_to_user(kcmd.resbuf, res, len)) + ret = -EFAULT; + + kfree(res); + + return ret; +}; + +static int i2o_cfg_swdl(unsigned long arg) +{ + struct i2o_sw_xfer kxfer; + struct i2o_sw_xfer __user *pxfer = (struct i2o_sw_xfer __user *)arg; + unsigned char maxfrag = 0, curfrag = 1; + struct i2o_dma buffer; + struct i2o_message __iomem *msg; + u32 m; + unsigned int status = 0, swlen = 0, fragsize = 8192; + struct i2o_controller *c; + + if (copy_from_user(&kxfer, pxfer, sizeof(struct i2o_sw_xfer))) + return -EFAULT; + + if (get_user(swlen, kxfer.swlen) < 0) + return -EFAULT; + + if (get_user(maxfrag, kxfer.maxfrag) < 0) + return -EFAULT; + + if (get_user(curfrag, kxfer.curfrag) < 0) + return -EFAULT; + + if (curfrag == maxfrag) + fragsize = swlen - (maxfrag - 1) * 8192; + + if (!kxfer.buf || !access_ok(VERIFY_READ, kxfer.buf, fragsize)) + return -EFAULT; + + c = i2o_find_iop(kxfer.iop); + if (!c) + return -ENXIO; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -EBUSY; + + if (i2o_dma_alloc(&c->pdev->dev, &buffer, fragsize, GFP_KERNEL)) { + i2o_msg_nop(c, m); + return -ENOMEM; + } + + __copy_from_user(buffer.virt, kxfer.buf, fragsize); + + writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]); + writel(I2O_CMD_SW_DOWNLOAD << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + writel(i2o_config_driver.context, &msg->u.head[2]); + writel(0, &msg->u.head[3]); + writel((((u32) kxfer.flags) << 24) | (((u32) kxfer.sw_type) << 16) | + (((u32) maxfrag) << 8) | (((u32) curfrag)), &msg->body[0]); + writel(swlen, &msg->body[1]); + writel(kxfer.sw_id, &msg->body[2]); + writel(0xD0000000 | fragsize, &msg->body[3]); + writel(buffer.phys, &msg->body[4]); + + osm_debug("swdl frag %d/%d (size %d)\n", curfrag, maxfrag, fragsize); + status = i2o_msg_post_wait_mem(c, m, 60, &buffer); + + if (status != -ETIMEDOUT) + i2o_dma_free(&c->pdev->dev, &buffer); + + if (status != I2O_POST_WAIT_OK) { + // it fails if you try and send frags out of order + // and for some yet unknown reasons too + osm_info("swdl failed, DetailedStatus = %d\n", status); + return status; + } + + return 0; +}; + +static int i2o_cfg_swul(unsigned long arg) +{ + struct i2o_sw_xfer kxfer; + struct i2o_sw_xfer __user *pxfer = (struct i2o_sw_xfer __user *)arg; + unsigned char maxfrag = 0, curfrag = 1; + struct i2o_dma buffer; + struct i2o_message __iomem *msg; + u32 m; + unsigned int status = 0, swlen = 0, fragsize = 8192; + struct i2o_controller *c; + int ret = 0; + + if (copy_from_user(&kxfer, pxfer, sizeof(struct i2o_sw_xfer))) + goto return_fault; + + if (get_user(swlen, kxfer.swlen) < 0) + goto return_fault; + + if (get_user(maxfrag, kxfer.maxfrag) < 0) + goto return_fault; + + if (get_user(curfrag, kxfer.curfrag) < 0) + goto return_fault; + + if (curfrag == maxfrag) + fragsize = swlen - (maxfrag - 1) * 8192; + + if (!kxfer.buf) + goto return_fault; + + c = i2o_find_iop(kxfer.iop); + if (!c) + return -ENXIO; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -EBUSY; + + if (i2o_dma_alloc(&c->pdev->dev, &buffer, fragsize, GFP_KERNEL)) { + i2o_msg_nop(c, m); + return -ENOMEM; + } + + writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]); + writel(I2O_CMD_SW_UPLOAD << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + writel(i2o_config_driver.context, &msg->u.head[2]); + writel(0, &msg->u.head[3]); + writel((u32) kxfer.flags << 24 | (u32) kxfer. + sw_type << 16 | (u32) maxfrag << 8 | (u32) curfrag, + &msg->body[0]); + writel(swlen, &msg->body[1]); + writel(kxfer.sw_id, &msg->body[2]); + writel(0xD0000000 | fragsize, &msg->body[3]); + writel(buffer.phys, &msg->body[4]); + + osm_debug("swul frag %d/%d (size %d)\n", curfrag, maxfrag, fragsize); + status = i2o_msg_post_wait_mem(c, m, 60, &buffer); + + if (status != I2O_POST_WAIT_OK) { + if (status != -ETIMEDOUT) + i2o_dma_free(&c->pdev->dev, &buffer); + + osm_info("swul failed, DetailedStatus = %d\n", status); + return status; + } + + if (copy_to_user(kxfer.buf, buffer.virt, fragsize)) + ret = -EFAULT; + + i2o_dma_free(&c->pdev->dev, &buffer); + +return_ret: + return ret; +return_fault: + ret = -EFAULT; + goto return_ret; +}; + +static int i2o_cfg_swdel(unsigned long arg) +{ + struct i2o_controller *c; + struct i2o_sw_xfer kxfer; + struct i2o_sw_xfer __user *pxfer = (struct i2o_sw_xfer __user *)arg; + struct i2o_message __iomem *msg; + u32 m; + unsigned int swlen; + int token; + + if (copy_from_user(&kxfer, pxfer, sizeof(struct i2o_sw_xfer))) + return -EFAULT; + + if (get_user(swlen, kxfer.swlen) < 0) + return -EFAULT; + + c = i2o_find_iop(kxfer.iop); + if (!c) + return -ENXIO; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -EBUSY; + + writel(SEVEN_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_SW_REMOVE << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + writel(i2o_config_driver.context, &msg->u.head[2]); + writel(0, &msg->u.head[3]); + writel((u32) kxfer.flags << 24 | (u32) kxfer.sw_type << 16, + &msg->body[0]); + writel(swlen, &msg->body[1]); + writel(kxfer.sw_id, &msg->body[2]); + + token = i2o_msg_post_wait(c, m, 10); + + if (token != I2O_POST_WAIT_OK) { + osm_info("swdel failed, DetailedStatus = %d\n", token); + return -ETIMEDOUT; + } + + return 0; +}; + +static int i2o_cfg_validate(unsigned long arg) +{ + int token; + int iop = (int)arg; + struct i2o_message __iomem *msg; + u32 m; + struct i2o_controller *c; + + c = i2o_find_iop(iop); + if (!c) + return -ENXIO; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -EBUSY; + + writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_CONFIG_VALIDATE << 24 | HOST_TID << 12 | iop, + &msg->u.head[1]); + writel(i2o_config_driver.context, &msg->u.head[2]); + writel(0, &msg->u.head[3]); + + token = i2o_msg_post_wait(c, m, 10); + + if (token != I2O_POST_WAIT_OK) { + osm_info("Can't validate configuration, ErrorStatus = %d\n", + token); + return -ETIMEDOUT; + } + + return 0; +}; + +static int i2o_cfg_evt_reg(unsigned long arg, struct file *fp) +{ + struct i2o_message __iomem *msg; + u32 m; + struct i2o_evt_id __user *pdesc = (struct i2o_evt_id __user *)arg; + struct i2o_evt_id kdesc; + struct i2o_controller *c; + struct i2o_device *d; + + if (copy_from_user(&kdesc, pdesc, sizeof(struct i2o_evt_id))) + return -EFAULT; + + /* IOP exists? */ + c = i2o_find_iop(kdesc.iop); + if (!c) + return -ENXIO; + + /* Device exists? */ + d = i2o_iop_find_device(c, kdesc.tid); + if (!d) + return -ENODEV; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -EBUSY; + + writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_UTIL_EVT_REGISTER << 24 | HOST_TID << 12 | kdesc.tid, + &msg->u.head[1]); + writel(i2o_config_driver.context, &msg->u.head[2]); + writel(i2o_cntxt_list_add(c, fp->private_data), &msg->u.head[3]); + writel(kdesc.evt_mask, &msg->body[0]); + + i2o_msg_post(c, m); + + return 0; +} + +static int i2o_cfg_evt_get(unsigned long arg, struct file *fp) +{ + struct i2o_cfg_info *p = NULL; + struct i2o_evt_get __user *uget = (struct i2o_evt_get __user *)arg; + struct i2o_evt_get kget; + unsigned long flags; + + for (p = open_files; p; p = p->next) + if (p->q_id == (ulong) fp->private_data) + break; + + if (!p->q_len) + return -ENOENT; + + memcpy(&kget.info, &p->event_q[p->q_out], sizeof(struct i2o_evt_info)); + MODINC(p->q_out, I2O_EVT_Q_LEN); + spin_lock_irqsave(&i2o_config_lock, flags); + p->q_len--; + kget.pending = p->q_len; + kget.lost = p->q_lost; + spin_unlock_irqrestore(&i2o_config_lock, flags); + + if (copy_to_user(uget, &kget, sizeof(struct i2o_evt_get))) + return -EFAULT; + return 0; +} + +#ifdef CONFIG_COMPAT +static int i2o_cfg_passthru32(unsigned fd, unsigned cmnd, unsigned long arg, + struct file *file) +{ + struct i2o_cmd_passthru32 __user *cmd; + struct i2o_controller *c; + u32 __user *user_msg; + u32 *reply = NULL; + u32 __user *user_reply = NULL; + u32 size = 0; + u32 reply_size = 0; + u32 rcode = 0; + struct i2o_dma sg_list[SG_TABLESIZE]; + u32 sg_offset = 0; + u32 sg_count = 0; + u32 i = 0; + i2o_status_block *sb; + struct i2o_message *msg; + u32 m; + unsigned int iop; + + cmd = (struct i2o_cmd_passthru32 __user *)arg; + + if (get_user(iop, &cmd->iop) || get_user(i, &cmd->msg)) + return -EFAULT; + + user_msg = compat_ptr(i); + + c = i2o_find_iop(iop); + if (!c) { + osm_debug("controller %d not found\n", iop); + return -ENXIO; + } + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + + sb = c->status_block.virt; + + if (get_user(size, &user_msg[0])) { + osm_warn("unable to get size!\n"); + return -EFAULT; + } + size = size >> 16; + + if (size > sb->inbound_frame_size) { + osm_warn("size of message > inbound_frame_size"); + return -EFAULT; + } + + user_reply = &user_msg[size]; + + size <<= 2; // Convert to bytes + + /* Copy in the user's I2O command */ + if (copy_from_user(msg, user_msg, size)) { + osm_warn("unable to copy user message\n"); + return -EFAULT; + } + i2o_dump_message(msg); + + if (get_user(reply_size, &user_reply[0]) < 0) + return -EFAULT; + + reply_size >>= 16; + reply_size <<= 2; + + reply = kmalloc(reply_size, GFP_KERNEL); + if (!reply) { + printk(KERN_WARNING "%s: Could not allocate reply buffer\n", + c->name); + return -ENOMEM; + } + memset(reply, 0, reply_size); + + sg_offset = (msg->u.head[0] >> 4) & 0x0f; + + writel(i2o_config_driver.context, &msg->u.s.icntxt); + writel(i2o_cntxt_list_add(c, reply), &msg->u.s.tcntxt); + + memset(sg_list, 0, sizeof(sg_list[0]) * SG_TABLESIZE); + if (sg_offset) { + struct sg_simple_element *sg; + + if (sg_offset * 4 >= size) { + rcode = -EFAULT; + goto cleanup; + } + // TODO 64bit fix + sg = (struct sg_simple_element *)((&msg->u.head[0]) + + sg_offset); + sg_count = + (size - sg_offset * 4) / sizeof(struct sg_simple_element); + if (sg_count > SG_TABLESIZE) { + printk(KERN_DEBUG "%s:IOCTL SG List too large (%u)\n", + c->name, sg_count); + kfree(reply); + return -EINVAL; + } + + for (i = 0; i < sg_count; i++) { + int sg_size; + struct i2o_dma *p; + + if (!(sg[i].flag_count & 0x10000000 + /*I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT */ )) { + printk(KERN_DEBUG + "%s:Bad SG element %d - not simple (%x)\n", + c->name, i, sg[i].flag_count); + rcode = -EINVAL; + goto cleanup; + } + sg_size = sg[i].flag_count & 0xffffff; + p = &(sg_list[i]); + /* Allocate memory for the transfer */ + if (i2o_dma_alloc + (&c->pdev->dev, p, sg_size, + PCI_DMA_BIDIRECTIONAL)) { + printk(KERN_DEBUG + "%s: Could not allocate SG buffer - size = %d buffer number %d of %d\n", + c->name, sg_size, i, sg_count); + rcode = -ENOMEM; + goto cleanup; + } + /* Copy in the user's SG buffer if necessary */ + if (sg[i]. + flag_count & 0x04000000 /*I2O_SGL_FLAGS_DIR */ ) { + // TODO 64bit fix + if (copy_from_user + (p->virt, (void __user *)(unsigned long)sg[i].addr_bus, + sg_size)) { + printk(KERN_DEBUG + "%s: Could not copy SG buf %d FROM user\n", + c->name, i); + rcode = -EFAULT; + goto cleanup; + } + } + //TODO 64bit fix + sg[i].addr_bus = (u32) p->phys; + } + } + + rcode = i2o_msg_post_wait(c, m, 60); + if (rcode) + goto cleanup; + + if (sg_offset) { + u32 msg[128]; + /* Copy back the Scatter Gather buffers back to user space */ + u32 j; + // TODO 64bit fix + struct sg_simple_element *sg; + int sg_size; + + // re-acquire the original message to handle correctly the sg copy operation + memset(&msg, 0, MSG_FRAME_SIZE * 4); + // get user msg size in u32s + if (get_user(size, &user_msg[0])) { + rcode = -EFAULT; + goto cleanup; + } + size = size >> 16; + size *= 4; + /* Copy in the user's I2O command */ + if (copy_from_user(msg, user_msg, size)) { + rcode = -EFAULT; + goto cleanup; + } + sg_count = + (size - sg_offset * 4) / sizeof(struct sg_simple_element); + + // TODO 64bit fix + sg = (struct sg_simple_element *)(msg + sg_offset); + for (j = 0; j < sg_count; j++) { + /* Copy out the SG list to user's buffer if necessary */ + if (! + (sg[j]. + flag_count & 0x4000000 /*I2O_SGL_FLAGS_DIR */ )) { + sg_size = sg[j].flag_count & 0xffffff; + // TODO 64bit fix + if (copy_to_user + ((void __user *)(u64) sg[j].addr_bus, + sg_list[j].virt, sg_size)) { + printk(KERN_WARNING + "%s: Could not copy %p TO user %x\n", + c->name, sg_list[j].virt, + sg[j].addr_bus); + rcode = -EFAULT; + goto cleanup; + } + } + } + } + + /* Copy back the reply to user space */ + if (reply_size) { + // we wrote our own values for context - now restore the user supplied ones + if (copy_from_user(reply + 2, user_msg + 2, sizeof(u32) * 2)) { + printk(KERN_WARNING + "%s: Could not copy message context FROM user\n", + c->name); + rcode = -EFAULT; + } + if (copy_to_user(user_reply, reply, reply_size)) { + printk(KERN_WARNING + "%s: Could not copy reply TO user\n", c->name); + rcode = -EFAULT; + } + } + + cleanup: + kfree(reply); + return rcode; +} + +#else + +static int i2o_cfg_passthru(unsigned long arg) +{ + struct i2o_cmd_passthru __user *cmd = + (struct i2o_cmd_passthru __user *)arg; + struct i2o_controller *c; + u32 __user *user_msg; + u32 *reply = NULL; + u32 __user *user_reply = NULL; + u32 size = 0; + u32 reply_size = 0; + u32 rcode = 0; + void *sg_list[SG_TABLESIZE]; + u32 sg_offset = 0; + u32 sg_count = 0; + int sg_index = 0; + u32 i = 0; + void *p = NULL; + i2o_status_block *sb; + struct i2o_message __iomem *msg; + u32 m; + unsigned int iop; + + if (get_user(iop, &cmd->iop) || get_user(user_msg, &cmd->msg)) + return -EFAULT; + + c = i2o_find_iop(iop); + if (!c) { + osm_warn("controller %d not found\n", iop); + return -ENXIO; + } + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + + sb = c->status_block.virt; + + if (get_user(size, &user_msg[0])) + return -EFAULT; + size = size >> 16; + + if (size > sb->inbound_frame_size) { + osm_warn("size of message > inbound_frame_size"); + return -EFAULT; + } + + user_reply = &user_msg[size]; + + size <<= 2; // Convert to bytes + + /* Copy in the user's I2O command */ + if (copy_from_user(msg, user_msg, size)) + return -EFAULT; + + if (get_user(reply_size, &user_reply[0]) < 0) + return -EFAULT; + + reply_size >>= 16; + reply_size <<= 2; + + reply = kmalloc(reply_size, GFP_KERNEL); + if (!reply) { + printk(KERN_WARNING "%s: Could not allocate reply buffer\n", + c->name); + return -ENOMEM; + } + memset(reply, 0, reply_size); + + sg_offset = (msg->u.head[0] >> 4) & 0x0f; + + writel(i2o_config_driver.context, &msg->u.s.icntxt); + writel(i2o_cntxt_list_add(c, reply), &msg->u.s.tcntxt); + + memset(sg_list, 0, sizeof(sg_list[0]) * SG_TABLESIZE); + if (sg_offset) { + struct sg_simple_element *sg; + + if (sg_offset * 4 >= size) { + rcode = -EFAULT; + goto cleanup; + } + // TODO 64bit fix + sg = (struct sg_simple_element *)((&msg->u.head[0]) + + sg_offset); + sg_count = + (size - sg_offset * 4) / sizeof(struct sg_simple_element); + if (sg_count > SG_TABLESIZE) { + printk(KERN_DEBUG "%s:IOCTL SG List too large (%u)\n", + c->name, sg_count); + kfree(reply); + return -EINVAL; + } + + for (i = 0; i < sg_count; i++) { + int sg_size; + + if (!(sg[i].flag_count & 0x10000000 + /*I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT */ )) { + printk(KERN_DEBUG + "%s:Bad SG element %d - not simple (%x)\n", + c->name, i, sg[i].flag_count); + rcode = -EINVAL; + goto cleanup; + } + sg_size = sg[i].flag_count & 0xffffff; + /* Allocate memory for the transfer */ + p = kmalloc(sg_size, GFP_KERNEL); + if (!p) { + printk(KERN_DEBUG + "%s: Could not allocate SG buffer - size = %d buffer number %d of %d\n", + c->name, sg_size, i, sg_count); + rcode = -ENOMEM; + goto cleanup; + } + sg_list[sg_index++] = p; // sglist indexed with input frame, not our internal frame. + /* Copy in the user's SG buffer if necessary */ + if (sg[i]. + flag_count & 0x04000000 /*I2O_SGL_FLAGS_DIR */ ) { + // TODO 64bit fix + if (copy_from_user + (p, (void __user *)sg[i].addr_bus, + sg_size)) { + printk(KERN_DEBUG + "%s: Could not copy SG buf %d FROM user\n", + c->name, i); + rcode = -EFAULT; + goto cleanup; + } + } + //TODO 64bit fix + sg[i].addr_bus = virt_to_bus(p); + } + } + + rcode = i2o_msg_post_wait(c, m, 60); + if (rcode) + goto cleanup; + + if (sg_offset) { + u32 msg[128]; + /* Copy back the Scatter Gather buffers back to user space */ + u32 j; + // TODO 64bit fix + struct sg_simple_element *sg; + int sg_size; + + // re-acquire the original message to handle correctly the sg copy operation + memset(&msg, 0, MSG_FRAME_SIZE * 4); + // get user msg size in u32s + if (get_user(size, &user_msg[0])) { + rcode = -EFAULT; + goto cleanup; + } + size = size >> 16; + size *= 4; + /* Copy in the user's I2O command */ + if (copy_from_user(msg, user_msg, size)) { + rcode = -EFAULT; + goto cleanup; + } + sg_count = + (size - sg_offset * 4) / sizeof(struct sg_simple_element); + + // TODO 64bit fix + sg = (struct sg_simple_element *)(msg + sg_offset); + for (j = 0; j < sg_count; j++) { + /* Copy out the SG list to user's buffer if necessary */ + if (! + (sg[j]. + flag_count & 0x4000000 /*I2O_SGL_FLAGS_DIR */ )) { + sg_size = sg[j].flag_count & 0xffffff; + // TODO 64bit fix + if (copy_to_user + ((void __user *)sg[j].addr_bus, sg_list[j], + sg_size)) { + printk(KERN_WARNING + "%s: Could not copy %p TO user %x\n", + c->name, sg_list[j], + sg[j].addr_bus); + rcode = -EFAULT; + goto cleanup; + } + } + } + } + + /* Copy back the reply to user space */ + if (reply_size) { + // we wrote our own values for context - now restore the user supplied ones + if (copy_from_user(reply + 2, user_msg + 2, sizeof(u32) * 2)) { + printk(KERN_WARNING + "%s: Could not copy message context FROM user\n", + c->name); + rcode = -EFAULT; + } + if (copy_to_user(user_reply, reply, reply_size)) { + printk(KERN_WARNING + "%s: Could not copy reply TO user\n", c->name); + rcode = -EFAULT; + } + } + + cleanup: + kfree(reply); + return rcode; +} +#endif + +/* + * IOCTL Handler + */ +static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd, + unsigned long arg) +{ + int ret; + + switch (cmd) { + case I2OGETIOPS: + ret = i2o_cfg_getiops(arg); + break; + + case I2OHRTGET: + ret = i2o_cfg_gethrt(arg); + break; + + case I2OLCTGET: + ret = i2o_cfg_getlct(arg); + break; + + case I2OPARMSET: + ret = i2o_cfg_parms(arg, I2OPARMSET); + break; + + case I2OPARMGET: + ret = i2o_cfg_parms(arg, I2OPARMGET); + break; + + case I2OSWDL: + ret = i2o_cfg_swdl(arg); + break; + + case I2OSWUL: + ret = i2o_cfg_swul(arg); + break; + + case I2OSWDEL: + ret = i2o_cfg_swdel(arg); + break; + + case I2OVALIDATE: + ret = i2o_cfg_validate(arg); + break; + + case I2OEVTREG: + ret = i2o_cfg_evt_reg(arg, fp); + break; + + case I2OEVTGET: + ret = i2o_cfg_evt_get(arg, fp); + break; + +#ifndef CONFIG_COMPAT + case I2OPASSTHRU: + ret = i2o_cfg_passthru(arg); + break; +#endif + + default: + osm_debug("unknown ioctl called!\n"); + ret = -EINVAL; + } + + return ret; +} + +static int cfg_open(struct inode *inode, struct file *file) +{ + struct i2o_cfg_info *tmp = + (struct i2o_cfg_info *)kmalloc(sizeof(struct i2o_cfg_info), + GFP_KERNEL); + unsigned long flags; + + if (!tmp) + return -ENOMEM; + + file->private_data = (void *)(i2o_cfg_info_id++); + tmp->fp = file; + tmp->fasync = NULL; + tmp->q_id = (ulong) file->private_data; + tmp->q_len = 0; + tmp->q_in = 0; + tmp->q_out = 0; + tmp->q_lost = 0; + tmp->next = open_files; + + spin_lock_irqsave(&i2o_config_lock, flags); + open_files = tmp; + spin_unlock_irqrestore(&i2o_config_lock, flags); + + return 0; +} + +static int cfg_fasync(int fd, struct file *fp, int on) +{ + ulong id = (ulong) fp->private_data; + struct i2o_cfg_info *p; + + for (p = open_files; p; p = p->next) + if (p->q_id == id) + break; + + if (!p) + return -EBADF; + + return fasync_helper(fd, fp, on, &p->fasync); +} + +static int cfg_release(struct inode *inode, struct file *file) +{ + ulong id = (ulong) file->private_data; + struct i2o_cfg_info *p1, *p2; + unsigned long flags; + + lock_kernel(); + p1 = p2 = NULL; + + spin_lock_irqsave(&i2o_config_lock, flags); + for (p1 = open_files; p1;) { + if (p1->q_id == id) { + + if (p1->fasync) + cfg_fasync(-1, file, 0); + if (p2) + p2->next = p1->next; + else + open_files = p1->next; + + kfree(p1); + break; + } + p2 = p1; + p1 = p1->next; + } + spin_unlock_irqrestore(&i2o_config_lock, flags); + unlock_kernel(); + + return 0; +} + +static struct file_operations config_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .ioctl = i2o_cfg_ioctl, + .open = cfg_open, + .release = cfg_release, + .fasync = cfg_fasync, +}; + +static struct miscdevice i2o_miscdev = { + I2O_MINOR, + "i2octl", + &config_fops +}; + +static int __init i2o_config_init(void) +{ + printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); + + spin_lock_init(&i2o_config_lock); + + if (misc_register(&i2o_miscdev) < 0) { + osm_err("can't register device.\n"); + return -EBUSY; + } + /* + * Install our handler + */ + if (i2o_driver_register(&i2o_config_driver)) { + osm_err("handler register failed.\n"); + misc_deregister(&i2o_miscdev); + return -EBUSY; + } +#ifdef CONFIG_COMPAT + register_ioctl32_conversion(I2OPASSTHRU32, i2o_cfg_passthru32); + register_ioctl32_conversion(I2OGETIOPS, (void *)sys_ioctl); +#endif + return 0; +} + +static void i2o_config_exit(void) +{ +#ifdef CONFIG_COMPAT + unregister_ioctl32_conversion(I2OPASSTHRU32); + unregister_ioctl32_conversion(I2OGETIOPS); +#endif + misc_deregister(&i2o_miscdev); + i2o_driver_unregister(&i2o_config_driver); +} + +MODULE_AUTHOR("Red Hat Software"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(OSM_DESCRIPTION); +MODULE_VERSION(OSM_VERSION); + +module_init(i2o_config_init); +module_exit(i2o_config_exit); diff --git a/drivers/message/i2o/i2o_lan.h b/drivers/message/i2o/i2o_lan.h new file mode 100644 index 000000000000..561d63304d7e --- /dev/null +++ b/drivers/message/i2o/i2o_lan.h @@ -0,0 +1,159 @@ +/* + * i2o_lan.h I2O LAN Class definitions + * + * I2O LAN CLASS OSM May 26th 2000 + * + * (C) Copyright 1999, 2000 University of Helsinki, + * Department of Computer Science + * + * This code is still under development / test. + * + * Author: Auvo Häkkinen <Auvo.Hakkinen@cs.Helsinki.FI> + * Juha Sievänen <Juha.Sievanen@cs.Helsinki.FI> + * Taneli Vähäkangas <Taneli.Vahakangas@cs.Helsinki.FI> + */ + +#ifndef _I2O_LAN_H +#define _I2O_LAN_H + +/* Default values for tunable parameters first */ + +#define I2O_LAN_MAX_BUCKETS_OUT 96 +#define I2O_LAN_BUCKET_THRESH 18 /* 9 buckets in one message */ +#define I2O_LAN_RX_COPYBREAK 200 +#define I2O_LAN_TX_TIMEOUT (1*HZ) +#define I2O_LAN_TX_BATCH_MODE 2 /* 2=automatic, 1=on, 0=off */ +#define I2O_LAN_EVENT_MASK 0 /* 0=None, 0xFFC00002=All */ + +/* LAN types */ +#define I2O_LAN_ETHERNET 0x0030 +#define I2O_LAN_100VG 0x0040 +#define I2O_LAN_TR 0x0050 +#define I2O_LAN_FDDI 0x0060 +#define I2O_LAN_FIBRE_CHANNEL 0x0070 +#define I2O_LAN_UNKNOWN 0x00000000 + +/* Connector types */ + +/* Ethernet */ +#define I2O_LAN_AUI (I2O_LAN_ETHERNET << 4) + 0x00000001 +#define I2O_LAN_10BASE5 (I2O_LAN_ETHERNET << 4) + 0x00000002 +#define I2O_LAN_FIORL (I2O_LAN_ETHERNET << 4) + 0x00000003 +#define I2O_LAN_10BASE2 (I2O_LAN_ETHERNET << 4) + 0x00000004 +#define I2O_LAN_10BROAD36 (I2O_LAN_ETHERNET << 4) + 0x00000005 +#define I2O_LAN_10BASE_T (I2O_LAN_ETHERNET << 4) + 0x00000006 +#define I2O_LAN_10BASE_FP (I2O_LAN_ETHERNET << 4) + 0x00000007 +#define I2O_LAN_10BASE_FB (I2O_LAN_ETHERNET << 4) + 0x00000008 +#define I2O_LAN_10BASE_FL (I2O_LAN_ETHERNET << 4) + 0x00000009 +#define I2O_LAN_100BASE_TX (I2O_LAN_ETHERNET << 4) + 0x0000000A +#define I2O_LAN_100BASE_FX (I2O_LAN_ETHERNET << 4) + 0x0000000B +#define I2O_LAN_100BASE_T4 (I2O_LAN_ETHERNET << 4) + 0x0000000C +#define I2O_LAN_1000BASE_SX (I2O_LAN_ETHERNET << 4) + 0x0000000D +#define I2O_LAN_1000BASE_LX (I2O_LAN_ETHERNET << 4) + 0x0000000E +#define I2O_LAN_1000BASE_CX (I2O_LAN_ETHERNET << 4) + 0x0000000F +#define I2O_LAN_1000BASE_T (I2O_LAN_ETHERNET << 4) + 0x00000010 + +/* AnyLAN */ +#define I2O_LAN_100VG_ETHERNET (I2O_LAN_100VG << 4) + 0x00000001 +#define I2O_LAN_100VG_TR (I2O_LAN_100VG << 4) + 0x00000002 + +/* Token Ring */ +#define I2O_LAN_4MBIT (I2O_LAN_TR << 4) + 0x00000001 +#define I2O_LAN_16MBIT (I2O_LAN_TR << 4) + 0x00000002 + +/* FDDI */ +#define I2O_LAN_125MBAUD (I2O_LAN_FDDI << 4) + 0x00000001 + +/* Fibre Channel */ +#define I2O_LAN_POINT_POINT (I2O_LAN_FIBRE_CHANNEL << 4) + 0x00000001 +#define I2O_LAN_ARB_LOOP (I2O_LAN_FIBRE_CHANNEL << 4) + 0x00000002 +#define I2O_LAN_PUBLIC_LOOP (I2O_LAN_FIBRE_CHANNEL << 4) + 0x00000003 +#define I2O_LAN_FABRIC (I2O_LAN_FIBRE_CHANNEL << 4) + 0x00000004 + +#define I2O_LAN_EMULATION 0x00000F00 +#define I2O_LAN_OTHER 0x00000F01 +#define I2O_LAN_DEFAULT 0xFFFFFFFF + +/* LAN class functions */ + +#define LAN_PACKET_SEND 0x3B +#define LAN_SDU_SEND 0x3D +#define LAN_RECEIVE_POST 0x3E +#define LAN_RESET 0x35 +#define LAN_SUSPEND 0x37 + +/* LAN DetailedStatusCode defines */ +#define I2O_LAN_DSC_SUCCESS 0x00 +#define I2O_LAN_DSC_DEVICE_FAILURE 0x01 +#define I2O_LAN_DSC_DESTINATION_NOT_FOUND 0x02 +#define I2O_LAN_DSC_TRANSMIT_ERROR 0x03 +#define I2O_LAN_DSC_TRANSMIT_ABORTED 0x04 +#define I2O_LAN_DSC_RECEIVE_ERROR 0x05 +#define I2O_LAN_DSC_RECEIVE_ABORTED 0x06 +#define I2O_LAN_DSC_DMA_ERROR 0x07 +#define I2O_LAN_DSC_BAD_PACKET_DETECTED 0x08 +#define I2O_LAN_DSC_OUT_OF_MEMORY 0x09 +#define I2O_LAN_DSC_BUCKET_OVERRUN 0x0A +#define I2O_LAN_DSC_IOP_INTERNAL_ERROR 0x0B +#define I2O_LAN_DSC_CANCELED 0x0C +#define I2O_LAN_DSC_INVALID_TRANSACTION_CONTEXT 0x0D +#define I2O_LAN_DSC_DEST_ADDRESS_DETECTED 0x0E +#define I2O_LAN_DSC_DEST_ADDRESS_OMITTED 0x0F +#define I2O_LAN_DSC_PARTIAL_PACKET_RETURNED 0x10 +#define I2O_LAN_DSC_SUSPENDED 0x11 + +struct i2o_packet_info { + u32 offset : 24; + u32 flags : 8; + u32 len : 24; + u32 status : 8; +}; + +struct i2o_bucket_descriptor { + u32 context; /* FIXME: 64bit support */ + struct i2o_packet_info packet_info[1]; +}; + +/* Event Indicator Mask Flags for LAN OSM */ + +#define I2O_LAN_EVT_LINK_DOWN 0x01 +#define I2O_LAN_EVT_LINK_UP 0x02 +#define I2O_LAN_EVT_MEDIA_CHANGE 0x04 + +#include <linux/netdevice.h> +#include <linux/fddidevice.h> + +struct i2o_lan_local { + u8 unit; + struct i2o_device *i2o_dev; + + struct fddi_statistics stats; /* see also struct net_device_stats */ + unsigned short (*type_trans)(struct sk_buff *, struct net_device *); + atomic_t buckets_out; /* nbr of unused buckets on DDM */ + atomic_t tx_out; /* outstanding TXes */ + u8 tx_count; /* packets in one TX message frame */ + u16 tx_max_out; /* DDM's Tx queue len */ + u8 sgl_max; /* max SGLs in one message frame */ + u32 m; /* IOP address of the batch msg frame */ + + struct work_struct i2o_batch_send_task; + int send_active; + struct sk_buff **i2o_fbl; /* Free bucket list (to reuse skbs) */ + int i2o_fbl_tail; + spinlock_t fbl_lock; + + spinlock_t tx_lock; + + u32 max_size_mc_table; /* max number of multicast addresses */ + + /* LAN OSM configurable parameters are here: */ + + u16 max_buckets_out; /* max nbr of buckets to send to DDM */ + u16 bucket_thresh; /* send more when this many used */ + u16 rx_copybreak; + + u8 tx_batch_mode; /* Set when using batch mode sends */ + u32 i2o_event_mask; /* To turn on interesting event flags */ +}; + +#endif /* _I2O_LAN_H */ diff --git a/drivers/message/i2o/i2o_proc.c b/drivers/message/i2o/i2o_proc.c new file mode 100644 index 000000000000..b176d0eeff7f --- /dev/null +++ b/drivers/message/i2o/i2o_proc.c @@ -0,0 +1,2112 @@ +/* + * procfs handler for Linux I2O subsystem + * + * (c) Copyright 1999 Deepak Saxena + * + * Originally written by Deepak Saxena(deepak@plexity.net) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This is an initial test release. The code is based on the design of the + * ide procfs system (drivers/block/ide-proc.c). Some code taken from + * i2o-core module by Alan Cox. + * + * DISCLAIMER: This code is still under development/test and may cause + * your system to behave unpredictably. Use at your own discretion. + * + * + * Fixes/additions: + * Juha Sievänen (Juha.Sievanen@cs.Helsinki.FI), + * Auvo Häkkinen (Auvo.Hakkinen@cs.Helsinki.FI) + * University of Helsinki, Department of Computer Science + * LAN entries + * Markus Lidel <Markus.Lidel@shadowconnect.com> + * Changes for new I2O API + */ + +#define OSM_NAME "proc-osm" +#define OSM_VERSION "$Rev$" +#define OSM_DESCRIPTION "I2O ProcFS OSM" + +#define I2O_MAX_MODULES 4 +// FIXME! +#define FMT_U64_HEX "0x%08x%08x" +#define U64_VAL(pu64) *((u32*)(pu64)+1), *((u32*)(pu64)) + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/i2o.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> + +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/byteorder.h> + +/* Structure used to define /proc entries */ +typedef struct _i2o_proc_entry_t { + char *name; /* entry name */ + mode_t mode; /* mode */ + struct file_operations *fops; /* open function */ +} i2o_proc_entry; + +/* global I2O /proc/i2o entry */ +static struct proc_dir_entry *i2o_proc_dir_root; + +/* proc OSM driver struct */ +static struct i2o_driver i2o_proc_driver = { + .name = OSM_NAME, +}; + +static int print_serial_number(struct seq_file *seq, u8 * serialno, int max_len) +{ + int i; + + /* 19990419 -sralston + * The I2O v1.5 (and v2.0 so far) "official specification" + * got serial numbers WRONG! + * Apparently, and despite what Section 3.4.4 says and + * Figure 3-35 shows (pg 3-39 in the pdf doc), + * the convention / consensus seems to be: + * + First byte is SNFormat + * + Second byte is SNLen (but only if SNFormat==7 (?)) + * + (v2.0) SCSI+BS may use IEEE Registered (64 or 128 bit) format + */ + switch (serialno[0]) { + case I2O_SNFORMAT_BINARY: /* Binary */ + seq_printf(seq, "0x"); + for (i = 0; i < serialno[1]; i++) { + seq_printf(seq, "%02X", serialno[2 + i]); + } + break; + + case I2O_SNFORMAT_ASCII: /* ASCII */ + if (serialno[1] < ' ') { /* printable or SNLen? */ + /* sanity */ + max_len = + (max_len < serialno[1]) ? max_len : serialno[1]; + serialno[1 + max_len] = '\0'; + + /* just print it */ + seq_printf(seq, "%s", &serialno[2]); + } else { + /* print chars for specified length */ + for (i = 0; i < serialno[1]; i++) { + seq_printf(seq, "%c", serialno[2 + i]); + } + } + break; + + case I2O_SNFORMAT_UNICODE: /* UNICODE */ + seq_printf(seq, "UNICODE Format. Can't Display\n"); + break; + + case I2O_SNFORMAT_LAN48_MAC: /* LAN-48 MAC Address */ + seq_printf(seq, + "LAN-48 MAC address @ %02X:%02X:%02X:%02X:%02X:%02X", + serialno[2], serialno[3], + serialno[4], serialno[5], serialno[6], serialno[7]); + break; + + case I2O_SNFORMAT_WAN: /* WAN MAC Address */ + /* FIXME: Figure out what a WAN access address looks like?? */ + seq_printf(seq, "WAN Access Address"); + break; + +/* plus new in v2.0 */ + case I2O_SNFORMAT_LAN64_MAC: /* LAN-64 MAC Address */ + /* FIXME: Figure out what a LAN-64 address really looks like?? */ + seq_printf(seq, + "LAN-64 MAC address @ [?:%02X:%02X:?] %02X:%02X:%02X:%02X:%02X:%02X", + serialno[8], serialno[9], + serialno[2], serialno[3], + serialno[4], serialno[5], serialno[6], serialno[7]); + break; + + case I2O_SNFORMAT_DDM: /* I2O DDM */ + seq_printf(seq, + "DDM: Tid=%03Xh, Rsvd=%04Xh, OrgId=%04Xh", + *(u16 *) & serialno[2], + *(u16 *) & serialno[4], *(u16 *) & serialno[6]); + break; + + case I2O_SNFORMAT_IEEE_REG64: /* IEEE Registered (64-bit) */ + case I2O_SNFORMAT_IEEE_REG128: /* IEEE Registered (128-bit) */ + /* FIXME: Figure if this is even close?? */ + seq_printf(seq, + "IEEE NodeName(hi,lo)=(%08Xh:%08Xh), PortName(hi,lo)=(%08Xh:%08Xh)\n", + *(u32 *) & serialno[2], + *(u32 *) & serialno[6], + *(u32 *) & serialno[10], *(u32 *) & serialno[14]); + break; + + case I2O_SNFORMAT_UNKNOWN: /* Unknown 0 */ + case I2O_SNFORMAT_UNKNOWN2: /* Unknown 0xff */ + default: + seq_printf(seq, "Unknown data format (0x%02x)", serialno[0]); + break; + } + + return 0; +} + +/** + * i2o_get_class_name - do i2o class name lookup + * @class: class number + * + * Return a descriptive string for an i2o class + */ +static const char *i2o_get_class_name(int class) +{ + int idx = 16; + static char *i2o_class_name[] = { + "Executive", + "Device Driver Module", + "Block Device", + "Tape Device", + "LAN Interface", + "WAN Interface", + "Fibre Channel Port", + "Fibre Channel Device", + "SCSI Device", + "ATE Port", + "ATE Device", + "Floppy Controller", + "Floppy Device", + "Secondary Bus Port", + "Peer Transport Agent", + "Peer Transport", + "Unknown" + }; + + switch (class & 0xfff) { + case I2O_CLASS_EXECUTIVE: + idx = 0; + break; + case I2O_CLASS_DDM: + idx = 1; + break; + case I2O_CLASS_RANDOM_BLOCK_STORAGE: + idx = 2; + break; + case I2O_CLASS_SEQUENTIAL_STORAGE: + idx = 3; + break; + case I2O_CLASS_LAN: + idx = 4; + break; + case I2O_CLASS_WAN: + idx = 5; + break; + case I2O_CLASS_FIBRE_CHANNEL_PORT: + idx = 6; + break; + case I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL: + idx = 7; + break; + case I2O_CLASS_SCSI_PERIPHERAL: + idx = 8; + break; + case I2O_CLASS_ATE_PORT: + idx = 9; + break; + case I2O_CLASS_ATE_PERIPHERAL: + idx = 10; + break; + case I2O_CLASS_FLOPPY_CONTROLLER: + idx = 11; + break; + case I2O_CLASS_FLOPPY_DEVICE: + idx = 12; + break; + case I2O_CLASS_BUS_ADAPTER_PORT: + idx = 13; + break; + case I2O_CLASS_PEER_TRANSPORT_AGENT: + idx = 14; + break; + case I2O_CLASS_PEER_TRANSPORT: + idx = 15; + break; + } + + return i2o_class_name[idx]; +} + +#define SCSI_TABLE_SIZE 13 +static char *scsi_devices[] = { + "Direct-Access Read/Write", + "Sequential-Access Storage", + "Printer", + "Processor", + "WORM Device", + "CD-ROM Device", + "Scanner Device", + "Optical Memory Device", + "Medium Changer Device", + "Communications Device", + "Graphics Art Pre-Press Device", + "Graphics Art Pre-Press Device", + "Array Controller Device" +}; + +static char *chtostr(u8 * chars, int n) +{ + char tmp[256]; + tmp[0] = 0; + return strncat(tmp, (char *)chars, n); +} + +static int i2o_report_query_status(struct seq_file *seq, int block_status, + char *group) +{ + switch (block_status) { + case -ETIMEDOUT: + return seq_printf(seq, "Timeout reading group %s.\n", group); + case -ENOMEM: + return seq_printf(seq, "No free memory to read the table.\n"); + case -I2O_PARAMS_STATUS_INVALID_GROUP_ID: + return seq_printf(seq, "Group %s not supported.\n", group); + default: + return seq_printf(seq, + "Error reading group %s. BlockStatus 0x%02X\n", + group, -block_status); + } +} + +static char *bus_strings[] = { + "Local Bus", + "ISA", + "EISA", + "MCA", + "PCI", + "PCMCIA", + "NUBUS", + "CARDBUS" +}; + +static int i2o_seq_show_hrt(struct seq_file *seq, void *v) +{ + struct i2o_controller *c = (struct i2o_controller *)seq->private; + i2o_hrt *hrt = (i2o_hrt *) c->hrt.virt; + u32 bus; + int i; + + if (hrt->hrt_version) { + seq_printf(seq, + "HRT table for controller is too new a version.\n"); + return 0; + } + + seq_printf(seq, "HRT has %d entries of %d bytes each.\n", + hrt->num_entries, hrt->entry_len << 2); + + for (i = 0; i < hrt->num_entries; i++) { + seq_printf(seq, "Entry %d:\n", i); + seq_printf(seq, " Adapter ID: %0#10x\n", + hrt->hrt_entry[i].adapter_id); + seq_printf(seq, " Controlling tid: %0#6x\n", + hrt->hrt_entry[i].parent_tid); + + if (hrt->hrt_entry[i].bus_type != 0x80) { + bus = hrt->hrt_entry[i].bus_type; + seq_printf(seq, " %s Information\n", + bus_strings[bus]); + + switch (bus) { + case I2O_BUS_LOCAL: + seq_printf(seq, " IOBase: %0#6x,", + hrt->hrt_entry[i].bus.local_bus. + LbBaseIOPort); + seq_printf(seq, " MemoryBase: %0#10x\n", + hrt->hrt_entry[i].bus.local_bus. + LbBaseMemoryAddress); + break; + + case I2O_BUS_ISA: + seq_printf(seq, " IOBase: %0#6x,", + hrt->hrt_entry[i].bus.isa_bus. + IsaBaseIOPort); + seq_printf(seq, " MemoryBase: %0#10x,", + hrt->hrt_entry[i].bus.isa_bus. + IsaBaseMemoryAddress); + seq_printf(seq, " CSN: %0#4x,", + hrt->hrt_entry[i].bus.isa_bus.CSN); + break; + + case I2O_BUS_EISA: + seq_printf(seq, " IOBase: %0#6x,", + hrt->hrt_entry[i].bus.eisa_bus. + EisaBaseIOPort); + seq_printf(seq, " MemoryBase: %0#10x,", + hrt->hrt_entry[i].bus.eisa_bus. + EisaBaseMemoryAddress); + seq_printf(seq, " Slot: %0#4x,", + hrt->hrt_entry[i].bus.eisa_bus. + EisaSlotNumber); + break; + + case I2O_BUS_MCA: + seq_printf(seq, " IOBase: %0#6x,", + hrt->hrt_entry[i].bus.mca_bus. + McaBaseIOPort); + seq_printf(seq, " MemoryBase: %0#10x,", + hrt->hrt_entry[i].bus.mca_bus. + McaBaseMemoryAddress); + seq_printf(seq, " Slot: %0#4x,", + hrt->hrt_entry[i].bus.mca_bus. + McaSlotNumber); + break; + + case I2O_BUS_PCI: + seq_printf(seq, " Bus: %0#4x", + hrt->hrt_entry[i].bus.pci_bus. + PciBusNumber); + seq_printf(seq, " Dev: %0#4x", + hrt->hrt_entry[i].bus.pci_bus. + PciDeviceNumber); + seq_printf(seq, " Func: %0#4x", + hrt->hrt_entry[i].bus.pci_bus. + PciFunctionNumber); + seq_printf(seq, " Vendor: %0#6x", + hrt->hrt_entry[i].bus.pci_bus. + PciVendorID); + seq_printf(seq, " Device: %0#6x\n", + hrt->hrt_entry[i].bus.pci_bus. + PciDeviceID); + break; + + default: + seq_printf(seq, " Unsupported Bus Type\n"); + } + } else + seq_printf(seq, " Unknown Bus Type\n"); + } + + return 0; +} + +static int i2o_seq_show_lct(struct seq_file *seq, void *v) +{ + struct i2o_controller *c = (struct i2o_controller *)seq->private; + i2o_lct *lct = (i2o_lct *) c->lct; + int entries; + int i; + +#define BUS_TABLE_SIZE 3 + static char *bus_ports[] = { + "Generic Bus", + "SCSI Bus", + "Fibre Channel Bus" + }; + + entries = (lct->table_size - 3) / 9; + + seq_printf(seq, "LCT contains %d %s\n", entries, + entries == 1 ? "entry" : "entries"); + if (lct->boot_tid) + seq_printf(seq, "Boot Device @ ID %d\n", lct->boot_tid); + + seq_printf(seq, "Current Change Indicator: %#10x\n", lct->change_ind); + + for (i = 0; i < entries; i++) { + seq_printf(seq, "Entry %d\n", i); + seq_printf(seq, " Class, SubClass : %s", + i2o_get_class_name(lct->lct_entry[i].class_id)); + + /* + * Classes which we'll print subclass info for + */ + switch (lct->lct_entry[i].class_id & 0xFFF) { + case I2O_CLASS_RANDOM_BLOCK_STORAGE: + switch (lct->lct_entry[i].sub_class) { + case 0x00: + seq_printf(seq, ", Direct-Access Read/Write"); + break; + + case 0x04: + seq_printf(seq, ", WORM Drive"); + break; + + case 0x05: + seq_printf(seq, ", CD-ROM Drive"); + break; + + case 0x07: + seq_printf(seq, ", Optical Memory Device"); + break; + + default: + seq_printf(seq, ", Unknown (0x%02x)", + lct->lct_entry[i].sub_class); + break; + } + break; + + case I2O_CLASS_LAN: + switch (lct->lct_entry[i].sub_class & 0xFF) { + case 0x30: + seq_printf(seq, ", Ethernet"); + break; + + case 0x40: + seq_printf(seq, ", 100base VG"); + break; + + case 0x50: + seq_printf(seq, ", IEEE 802.5/Token-Ring"); + break; + + case 0x60: + seq_printf(seq, ", ANSI X3T9.5 FDDI"); + break; + + case 0x70: + seq_printf(seq, ", Fibre Channel"); + break; + + default: + seq_printf(seq, ", Unknown Sub-Class (0x%02x)", + lct->lct_entry[i].sub_class & 0xFF); + break; + } + break; + + case I2O_CLASS_SCSI_PERIPHERAL: + if (lct->lct_entry[i].sub_class < SCSI_TABLE_SIZE) + seq_printf(seq, ", %s", + scsi_devices[lct->lct_entry[i]. + sub_class]); + else + seq_printf(seq, ", Unknown Device Type"); + break; + + case I2O_CLASS_BUS_ADAPTER_PORT: + if (lct->lct_entry[i].sub_class < BUS_TABLE_SIZE) + seq_printf(seq, ", %s", + bus_ports[lct->lct_entry[i]. + sub_class]); + else + seq_printf(seq, ", Unknown Bus Type"); + break; + } + seq_printf(seq, "\n"); + + seq_printf(seq, " Local TID : 0x%03x\n", + lct->lct_entry[i].tid); + seq_printf(seq, " User TID : 0x%03x\n", + lct->lct_entry[i].user_tid); + seq_printf(seq, " Parent TID : 0x%03x\n", + lct->lct_entry[i].parent_tid); + seq_printf(seq, " Identity Tag : 0x%x%x%x%x%x%x%x%x\n", + lct->lct_entry[i].identity_tag[0], + lct->lct_entry[i].identity_tag[1], + lct->lct_entry[i].identity_tag[2], + lct->lct_entry[i].identity_tag[3], + lct->lct_entry[i].identity_tag[4], + lct->lct_entry[i].identity_tag[5], + lct->lct_entry[i].identity_tag[6], + lct->lct_entry[i].identity_tag[7]); + seq_printf(seq, " Change Indicator : %0#10x\n", + lct->lct_entry[i].change_ind); + seq_printf(seq, " Event Capab Mask : %0#10x\n", + lct->lct_entry[i].device_flags); + } + + return 0; +} + +static int i2o_seq_show_status(struct seq_file *seq, void *v) +{ + struct i2o_controller *c = (struct i2o_controller *)seq->private; + char prodstr[25]; + int version; + i2o_status_block *sb = c->status_block.virt; + + i2o_status_get(c); // reread the status block + + seq_printf(seq, "Organization ID : %0#6x\n", sb->org_id); + + version = sb->i2o_version; + +/* FIXME for Spec 2.0 + if (version == 0x02) { + seq_printf(seq, "Lowest I2O version supported: "); + switch(workspace[2]) { + case 0x00: + seq_printf(seq, "1.0\n"); + break; + case 0x01: + seq_printf(seq, "1.5\n"); + break; + case 0x02: + seq_printf(seq, "2.0\n"); + break; + } + + seq_printf(seq, "Highest I2O version supported: "); + switch(workspace[3]) { + case 0x00: + seq_printf(seq, "1.0\n"); + break; + case 0x01: + seq_printf(seq, "1.5\n"); + break; + case 0x02: + seq_printf(seq, "2.0\n"); + break; + } + } +*/ + seq_printf(seq, "IOP ID : %0#5x\n", sb->iop_id); + seq_printf(seq, "Host Unit ID : %0#6x\n", sb->host_unit_id); + seq_printf(seq, "Segment Number : %0#5x\n", sb->segment_number); + + seq_printf(seq, "I2O version : "); + switch (version) { + case 0x00: + seq_printf(seq, "1.0\n"); + break; + case 0x01: + seq_printf(seq, "1.5\n"); + break; + case 0x02: + seq_printf(seq, "2.0\n"); + break; + default: + seq_printf(seq, "Unknown version\n"); + } + + seq_printf(seq, "IOP State : "); + switch (sb->iop_state) { + case 0x01: + seq_printf(seq, "INIT\n"); + break; + + case 0x02: + seq_printf(seq, "RESET\n"); + break; + + case 0x04: + seq_printf(seq, "HOLD\n"); + break; + + case 0x05: + seq_printf(seq, "READY\n"); + break; + + case 0x08: + seq_printf(seq, "OPERATIONAL\n"); + break; + + case 0x10: + seq_printf(seq, "FAILED\n"); + break; + + case 0x11: + seq_printf(seq, "FAULTED\n"); + break; + + default: + seq_printf(seq, "Unknown\n"); + break; + } + + seq_printf(seq, "Messenger Type : "); + switch (sb->msg_type) { + case 0x00: + seq_printf(seq, "Memory mapped\n"); + break; + case 0x01: + seq_printf(seq, "Memory mapped only\n"); + break; + case 0x02: + seq_printf(seq, "Remote only\n"); + break; + case 0x03: + seq_printf(seq, "Memory mapped and remote\n"); + break; + default: + seq_printf(seq, "Unknown\n"); + } + + seq_printf(seq, "Inbound Frame Size : %d bytes\n", + sb->inbound_frame_size << 2); + seq_printf(seq, "Max Inbound Frames : %d\n", + sb->max_inbound_frames); + seq_printf(seq, "Current Inbound Frames : %d\n", + sb->cur_inbound_frames); + seq_printf(seq, "Max Outbound Frames : %d\n", + sb->max_outbound_frames); + + /* Spec doesn't say if NULL terminated or not... */ + memcpy(prodstr, sb->product_id, 24); + prodstr[24] = '\0'; + seq_printf(seq, "Product ID : %s\n", prodstr); + seq_printf(seq, "Expected LCT Size : %d bytes\n", + sb->expected_lct_size); + + seq_printf(seq, "IOP Capabilities\n"); + seq_printf(seq, " Context Field Size Support : "); + switch (sb->iop_capabilities & 0x0000003) { + case 0: + seq_printf(seq, "Supports only 32-bit context fields\n"); + break; + case 1: + seq_printf(seq, "Supports only 64-bit context fields\n"); + break; + case 2: + seq_printf(seq, "Supports 32-bit and 64-bit context fields, " + "but not concurrently\n"); + break; + case 3: + seq_printf(seq, "Supports 32-bit and 64-bit context fields " + "concurrently\n"); + break; + default: + seq_printf(seq, "0x%08x\n", sb->iop_capabilities); + } + seq_printf(seq, " Current Context Field Size : "); + switch (sb->iop_capabilities & 0x0000000C) { + case 0: + seq_printf(seq, "not configured\n"); + break; + case 4: + seq_printf(seq, "Supports only 32-bit context fields\n"); + break; + case 8: + seq_printf(seq, "Supports only 64-bit context fields\n"); + break; + case 12: + seq_printf(seq, "Supports both 32-bit or 64-bit context fields " + "concurrently\n"); + break; + default: + seq_printf(seq, "\n"); + } + seq_printf(seq, " Inbound Peer Support : %s\n", + (sb-> + iop_capabilities & 0x00000010) ? "Supported" : + "Not supported"); + seq_printf(seq, " Outbound Peer Support : %s\n", + (sb-> + iop_capabilities & 0x00000020) ? "Supported" : + "Not supported"); + seq_printf(seq, " Peer to Peer Support : %s\n", + (sb-> + iop_capabilities & 0x00000040) ? "Supported" : + "Not supported"); + + seq_printf(seq, "Desired private memory size : %d kB\n", + sb->desired_mem_size >> 10); + seq_printf(seq, "Allocated private memory size : %d kB\n", + sb->current_mem_size >> 10); + seq_printf(seq, "Private memory base address : %0#10x\n", + sb->current_mem_base); + seq_printf(seq, "Desired private I/O size : %d kB\n", + sb->desired_io_size >> 10); + seq_printf(seq, "Allocated private I/O size : %d kB\n", + sb->current_io_size >> 10); + seq_printf(seq, "Private I/O base address : %0#10x\n", + sb->current_io_base); + + return 0; +} + +static int i2o_seq_show_hw(struct seq_file *seq, void *v) +{ + struct i2o_controller *c = (struct i2o_controller *)seq->private; + static u32 work32[5]; + static u8 *work8 = (u8 *) work32; + static u16 *work16 = (u16 *) work32; + int token; + u32 hwcap; + + static char *cpu_table[] = { + "Intel 80960 series", + "AMD2900 series", + "Motorola 68000 series", + "ARM series", + "MIPS series", + "Sparc series", + "PowerPC series", + "Intel x86 series" + }; + + token = + i2o_parm_field_get(c->exec, 0x0000, -1, &work32, sizeof(work32)); + + if (token < 0) { + i2o_report_query_status(seq, token, "0x0000 IOP Hardware"); + return 0; + } + + seq_printf(seq, "I2O Vendor ID : %0#6x\n", work16[0]); + seq_printf(seq, "Product ID : %0#6x\n", work16[1]); + seq_printf(seq, "CPU : "); + if (work8[16] > 8) + seq_printf(seq, "Unknown\n"); + else + seq_printf(seq, "%s\n", cpu_table[work8[16]]); + /* Anyone using ProcessorVersion? */ + + seq_printf(seq, "RAM : %dkB\n", work32[1] >> 10); + seq_printf(seq, "Non-Volatile Mem : %dkB\n", work32[2] >> 10); + + hwcap = work32[3]; + seq_printf(seq, "Capabilities : 0x%08x\n", hwcap); + seq_printf(seq, " [%s] Self booting\n", + (hwcap & 0x00000001) ? "+" : "-"); + seq_printf(seq, " [%s] Upgradable IRTOS\n", + (hwcap & 0x00000002) ? "+" : "-"); + seq_printf(seq, " [%s] Supports downloading DDMs\n", + (hwcap & 0x00000004) ? "+" : "-"); + seq_printf(seq, " [%s] Supports installing DDMs\n", + (hwcap & 0x00000008) ? "+" : "-"); + seq_printf(seq, " [%s] Battery-backed RAM\n", + (hwcap & 0x00000010) ? "+" : "-"); + + return 0; +} + +/* Executive group 0003h - Executing DDM List (table) */ +static int i2o_seq_show_ddm_table(struct seq_file *seq, void *v) +{ + struct i2o_controller *c = (struct i2o_controller *)seq->private; + int token; + int i; + + typedef struct _i2o_exec_execute_ddm_table { + u16 ddm_tid; + u8 module_type; + u8 reserved; + u16 i2o_vendor_id; + u16 module_id; + u8 module_name_version[28]; + u32 data_size; + u32 code_size; + } i2o_exec_execute_ddm_table; + + struct { + u16 result_count; + u16 pad; + u16 block_size; + u8 block_status; + u8 error_info_size; + u16 row_count; + u16 more_flag; + i2o_exec_execute_ddm_table ddm_table[I2O_MAX_MODULES]; + } *result; + + i2o_exec_execute_ddm_table ddm_table; + + result = kmalloc(sizeof(*result), GFP_KERNEL); + if (!result) + return -ENOMEM; + + token = i2o_parm_table_get(c->exec, I2O_PARAMS_TABLE_GET, 0x0003, -1, + NULL, 0, result, sizeof(*result)); + + if (token < 0) { + i2o_report_query_status(seq, token, + "0x0003 Executing DDM List"); + goto out; + } + + seq_printf(seq, + "Tid Module_type Vendor Mod_id Module_name Vrs Data_size Code_size\n"); + ddm_table = result->ddm_table[0]; + + for (i = 0; i < result->row_count; ddm_table = result->ddm_table[++i]) { + seq_printf(seq, "0x%03x ", ddm_table.ddm_tid & 0xFFF); + + switch (ddm_table.module_type) { + case 0x01: + seq_printf(seq, "Downloaded DDM "); + break; + case 0x22: + seq_printf(seq, "Embedded DDM "); + break; + default: + seq_printf(seq, " "); + } + + seq_printf(seq, "%-#7x", ddm_table.i2o_vendor_id); + seq_printf(seq, "%-#8x", ddm_table.module_id); + seq_printf(seq, "%-29s", + chtostr(ddm_table.module_name_version, 28)); + seq_printf(seq, "%9d ", ddm_table.data_size); + seq_printf(seq, "%8d", ddm_table.code_size); + + seq_printf(seq, "\n"); + } + out: + kfree(result); + return 0; +} + +/* Executive group 0004h - Driver Store (scalar) */ +static int i2o_seq_show_driver_store(struct seq_file *seq, void *v) +{ + struct i2o_controller *c = (struct i2o_controller *)seq->private; + u32 work32[8]; + int token; + + token = + i2o_parm_field_get(c->exec, 0x0004, -1, &work32, sizeof(work32)); + if (token < 0) { + i2o_report_query_status(seq, token, "0x0004 Driver Store"); + return 0; + } + + seq_printf(seq, "Module limit : %d\n" + "Module count : %d\n" + "Current space : %d kB\n" + "Free space : %d kB\n", + work32[0], work32[1], work32[2] >> 10, work32[3] >> 10); + + return 0; +} + +/* Executive group 0005h - Driver Store Table (table) */ +static int i2o_seq_show_drivers_stored(struct seq_file *seq, void *v) +{ + typedef struct _i2o_driver_store { + u16 stored_ddm_index; + u8 module_type; + u8 reserved; + u16 i2o_vendor_id; + u16 module_id; + u8 module_name_version[28]; + u8 date[8]; + u32 module_size; + u32 mpb_size; + u32 module_flags; + } i2o_driver_store_table; + + struct i2o_controller *c = (struct i2o_controller *)seq->private; + int token; + int i; + + typedef struct { + u16 result_count; + u16 pad; + u16 block_size; + u8 block_status; + u8 error_info_size; + u16 row_count; + u16 more_flag; + i2o_driver_store_table dst[I2O_MAX_MODULES]; + } i2o_driver_result_table; + + i2o_driver_result_table *result; + i2o_driver_store_table *dst; + + result = kmalloc(sizeof(i2o_driver_result_table), GFP_KERNEL); + if (result == NULL) + return -ENOMEM; + + token = i2o_parm_table_get(c->exec, I2O_PARAMS_TABLE_GET, 0x0005, -1, + NULL, 0, result, sizeof(*result)); + + if (token < 0) { + i2o_report_query_status(seq, token, + "0x0005 DRIVER STORE TABLE"); + kfree(result); + return 0; + } + + seq_printf(seq, + "# Module_type Vendor Mod_id Module_name Vrs" + "Date Mod_size Par_size Flags\n"); + for (i = 0, dst = &result->dst[0]; i < result->row_count; + dst = &result->dst[++i]) { + seq_printf(seq, "%-3d", dst->stored_ddm_index); + switch (dst->module_type) { + case 0x01: + seq_printf(seq, "Downloaded DDM "); + break; + case 0x22: + seq_printf(seq, "Embedded DDM "); + break; + default: + seq_printf(seq, " "); + } + + seq_printf(seq, "%-#7x", dst->i2o_vendor_id); + seq_printf(seq, "%-#8x", dst->module_id); + seq_printf(seq, "%-29s", chtostr(dst->module_name_version, 28)); + seq_printf(seq, "%-9s", chtostr(dst->date, 8)); + seq_printf(seq, "%8d ", dst->module_size); + seq_printf(seq, "%8d ", dst->mpb_size); + seq_printf(seq, "0x%04x", dst->module_flags); + seq_printf(seq, "\n"); + } + + kfree(result); + return 0; +} + +/* Generic group F000h - Params Descriptor (table) */ +static int i2o_seq_show_groups(struct seq_file *seq, void *v) +{ + struct i2o_device *d = (struct i2o_device *)seq->private; + int token; + int i; + u8 properties; + + typedef struct _i2o_group_info { + u16 group_number; + u16 field_count; + u16 row_count; + u8 properties; + u8 reserved; + } i2o_group_info; + + struct { + u16 result_count; + u16 pad; + u16 block_size; + u8 block_status; + u8 error_info_size; + u16 row_count; + u16 more_flag; + i2o_group_info group[256]; + } *result; + + result = kmalloc(sizeof(*result), GFP_KERNEL); + if (!result) + return -ENOMEM; + + token = i2o_parm_table_get(d, I2O_PARAMS_TABLE_GET, 0xF000, -1, NULL, 0, + result, sizeof(*result)); + + if (token < 0) { + i2o_report_query_status(seq, token, "0xF000 Params Descriptor"); + goto out; + } + + seq_printf(seq, + "# Group FieldCount RowCount Type Add Del Clear\n"); + + for (i = 0; i < result->row_count; i++) { + seq_printf(seq, "%-3d", i); + seq_printf(seq, "0x%04X ", result->group[i].group_number); + seq_printf(seq, "%10d ", result->group[i].field_count); + seq_printf(seq, "%8d ", result->group[i].row_count); + + properties = result->group[i].properties; + if (properties & 0x1) + seq_printf(seq, "Table "); + else + seq_printf(seq, "Scalar "); + if (properties & 0x2) + seq_printf(seq, " + "); + else + seq_printf(seq, " - "); + if (properties & 0x4) + seq_printf(seq, " + "); + else + seq_printf(seq, " - "); + if (properties & 0x8) + seq_printf(seq, " + "); + else + seq_printf(seq, " - "); + + seq_printf(seq, "\n"); + } + + if (result->more_flag) + seq_printf(seq, "There is more...\n"); + out: + kfree(result); + return 0; +} + +/* Generic group F001h - Physical Device Table (table) */ +static int i2o_seq_show_phys_device(struct seq_file *seq, void *v) +{ + struct i2o_device *d = (struct i2o_device *)seq->private; + int token; + int i; + + struct { + u16 result_count; + u16 pad; + u16 block_size; + u8 block_status; + u8 error_info_size; + u16 row_count; + u16 more_flag; + u32 adapter_id[64]; + } result; + + token = i2o_parm_table_get(d, I2O_PARAMS_TABLE_GET, 0xF001, -1, NULL, 0, + &result, sizeof(result)); + + if (token < 0) { + i2o_report_query_status(seq, token, + "0xF001 Physical Device Table"); + return 0; + } + + if (result.row_count) + seq_printf(seq, "# AdapterId\n"); + + for (i = 0; i < result.row_count; i++) { + seq_printf(seq, "%-2d", i); + seq_printf(seq, "%#7x\n", result.adapter_id[i]); + } + + if (result.more_flag) + seq_printf(seq, "There is more...\n"); + + return 0; +} + +/* Generic group F002h - Claimed Table (table) */ +static int i2o_seq_show_claimed(struct seq_file *seq, void *v) +{ + struct i2o_device *d = (struct i2o_device *)seq->private; + int token; + int i; + + struct { + u16 result_count; + u16 pad; + u16 block_size; + u8 block_status; + u8 error_info_size; + u16 row_count; + u16 more_flag; + u16 claimed_tid[64]; + } result; + + token = i2o_parm_table_get(d, I2O_PARAMS_TABLE_GET, 0xF002, -1, NULL, 0, + &result, sizeof(result)); + + if (token < 0) { + i2o_report_query_status(seq, token, "0xF002 Claimed Table"); + return 0; + } + + if (result.row_count) + seq_printf(seq, "# ClaimedTid\n"); + + for (i = 0; i < result.row_count; i++) { + seq_printf(seq, "%-2d", i); + seq_printf(seq, "%#7x\n", result.claimed_tid[i]); + } + + if (result.more_flag) + seq_printf(seq, "There is more...\n"); + + return 0; +} + +/* Generic group F003h - User Table (table) */ +static int i2o_seq_show_users(struct seq_file *seq, void *v) +{ + struct i2o_device *d = (struct i2o_device *)seq->private; + int token; + int i; + + typedef struct _i2o_user_table { + u16 instance; + u16 user_tid; + u8 claim_type; + u8 reserved1; + u16 reserved2; + } i2o_user_table; + + struct { + u16 result_count; + u16 pad; + u16 block_size; + u8 block_status; + u8 error_info_size; + u16 row_count; + u16 more_flag; + i2o_user_table user[64]; + } *result; + + result = kmalloc(sizeof(*result), GFP_KERNEL); + if (!result) + return -ENOMEM; + + token = i2o_parm_table_get(d, I2O_PARAMS_TABLE_GET, 0xF003, -1, NULL, 0, + result, sizeof(*result)); + + if (token < 0) { + i2o_report_query_status(seq, token, "0xF003 User Table"); + goto out; + } + + seq_printf(seq, "# Instance UserTid ClaimType\n"); + + for (i = 0; i < result->row_count; i++) { + seq_printf(seq, "%-3d", i); + seq_printf(seq, "%#8x ", result->user[i].instance); + seq_printf(seq, "%#7x ", result->user[i].user_tid); + seq_printf(seq, "%#9x\n", result->user[i].claim_type); + } + + if (result->more_flag) + seq_printf(seq, "There is more...\n"); + out: + kfree(result); + return 0; +} + +/* Generic group F005h - Private message extensions (table) (optional) */ +static int i2o_seq_show_priv_msgs(struct seq_file *seq, void *v) +{ + struct i2o_device *d = (struct i2o_device *)seq->private; + int token; + int i; + + typedef struct _i2o_private { + u16 ext_instance; + u16 organization_id; + u16 x_function_code; + } i2o_private; + + struct { + u16 result_count; + u16 pad; + u16 block_size; + u8 block_status; + u8 error_info_size; + u16 row_count; + u16 more_flag; + i2o_private extension[64]; + } result; + + token = i2o_parm_table_get(d, I2O_PARAMS_TABLE_GET, 0xF000, -1, NULL, 0, + &result, sizeof(result)); + + if (token < 0) { + i2o_report_query_status(seq, token, + "0xF005 Private Message Extensions (optional)"); + return 0; + } + + seq_printf(seq, "Instance# OrgId FunctionCode\n"); + + for (i = 0; i < result.row_count; i++) { + seq_printf(seq, "%0#9x ", result.extension[i].ext_instance); + seq_printf(seq, "%0#6x ", result.extension[i].organization_id); + seq_printf(seq, "%0#6x", result.extension[i].x_function_code); + + seq_printf(seq, "\n"); + } + + if (result.more_flag) + seq_printf(seq, "There is more...\n"); + + return 0; +} + +/* Generic group F006h - Authorized User Table (table) */ +static int i2o_seq_show_authorized_users(struct seq_file *seq, void *v) +{ + struct i2o_device *d = (struct i2o_device *)seq->private; + int token; + int i; + + struct { + u16 result_count; + u16 pad; + u16 block_size; + u8 block_status; + u8 error_info_size; + u16 row_count; + u16 more_flag; + u32 alternate_tid[64]; + } result; + + token = i2o_parm_table_get(d, I2O_PARAMS_TABLE_GET, 0xF006, -1, NULL, 0, + &result, sizeof(result)); + + if (token < 0) { + i2o_report_query_status(seq, token, + "0xF006 Autohorized User Table"); + return 0; + } + + if (result.row_count) + seq_printf(seq, "# AlternateTid\n"); + + for (i = 0; i < result.row_count; i++) { + seq_printf(seq, "%-2d", i); + seq_printf(seq, "%#7x ", result.alternate_tid[i]); + } + + if (result.more_flag) + seq_printf(seq, "There is more...\n"); + + return 0; +} + +/* Generic group F100h - Device Identity (scalar) */ +static int i2o_seq_show_dev_identity(struct seq_file *seq, void *v) +{ + struct i2o_device *d = (struct i2o_device *)seq->private; + static u32 work32[128]; // allow for "stuff" + up to 256 byte (max) serial number + // == (allow) 512d bytes (max) + static u16 *work16 = (u16 *) work32; + int token; + + token = i2o_parm_field_get(d, 0xF100, -1, &work32, sizeof(work32)); + + if (token < 0) { + i2o_report_query_status(seq, token, "0xF100 Device Identity"); + return 0; + } + + seq_printf(seq, "Device Class : %s\n", i2o_get_class_name(work16[0])); + seq_printf(seq, "Owner TID : %0#5x\n", work16[2]); + seq_printf(seq, "Parent TID : %0#5x\n", work16[3]); + seq_printf(seq, "Vendor info : %s\n", + chtostr((u8 *) (work32 + 2), 16)); + seq_printf(seq, "Product info : %s\n", + chtostr((u8 *) (work32 + 6), 16)); + seq_printf(seq, "Description : %s\n", + chtostr((u8 *) (work32 + 10), 16)); + seq_printf(seq, "Product rev. : %s\n", + chtostr((u8 *) (work32 + 14), 8)); + + seq_printf(seq, "Serial number : "); + print_serial_number(seq, (u8 *) (work32 + 16), + /* allow for SNLen plus + * possible trailing '\0' + */ + sizeof(work32) - (16 * sizeof(u32)) - 2); + seq_printf(seq, "\n"); + + return 0; +} + +static int i2o_seq_show_dev_name(struct seq_file *seq, void *v) +{ + struct i2o_device *d = (struct i2o_device *)seq->private; + + seq_printf(seq, "%s\n", d->device.bus_id); + + return 0; +} + +/* Generic group F101h - DDM Identity (scalar) */ +static int i2o_seq_show_ddm_identity(struct seq_file *seq, void *v) +{ + struct i2o_device *d = (struct i2o_device *)seq->private; + int token; + + struct { + u16 ddm_tid; + u8 module_name[24]; + u8 module_rev[8]; + u8 sn_format; + u8 serial_number[12]; + u8 pad[256]; // allow up to 256 byte (max) serial number + } result; + + token = i2o_parm_field_get(d, 0xF101, -1, &result, sizeof(result)); + + if (token < 0) { + i2o_report_query_status(seq, token, "0xF101 DDM Identity"); + return 0; + } + + seq_printf(seq, "Registering DDM TID : 0x%03x\n", result.ddm_tid); + seq_printf(seq, "Module name : %s\n", + chtostr(result.module_name, 24)); + seq_printf(seq, "Module revision : %s\n", + chtostr(result.module_rev, 8)); + + seq_printf(seq, "Serial number : "); + print_serial_number(seq, result.serial_number, sizeof(result) - 36); + /* allow for SNLen plus possible trailing '\0' */ + + seq_printf(seq, "\n"); + + return 0; +} + +/* Generic group F102h - User Information (scalar) */ +static int i2o_seq_show_uinfo(struct seq_file *seq, void *v) +{ + struct i2o_device *d = (struct i2o_device *)seq->private; + int token; + + struct { + u8 device_name[64]; + u8 service_name[64]; + u8 physical_location[64]; + u8 instance_number[4]; + } result; + + token = i2o_parm_field_get(d, 0xF102, -1, &result, sizeof(result)); + + if (token < 0) { + i2o_report_query_status(seq, token, "0xF102 User Information"); + return 0; + } + + seq_printf(seq, "Device name : %s\n", + chtostr(result.device_name, 64)); + seq_printf(seq, "Service name : %s\n", + chtostr(result.service_name, 64)); + seq_printf(seq, "Physical name : %s\n", + chtostr(result.physical_location, 64)); + seq_printf(seq, "Instance number : %s\n", + chtostr(result.instance_number, 4)); + + return 0; +} + +/* Generic group F103h - SGL Operating Limits (scalar) */ +static int i2o_seq_show_sgl_limits(struct seq_file *seq, void *v) +{ + struct i2o_device *d = (struct i2o_device *)seq->private; + static u32 work32[12]; + static u16 *work16 = (u16 *) work32; + static u8 *work8 = (u8 *) work32; + int token; + + token = i2o_parm_field_get(d, 0xF103, -1, &work32, sizeof(work32)); + + if (token < 0) { + i2o_report_query_status(seq, token, + "0xF103 SGL Operating Limits"); + return 0; + } + + seq_printf(seq, "SGL chain size : %d\n", work32[0]); + seq_printf(seq, "Max SGL chain size : %d\n", work32[1]); + seq_printf(seq, "SGL chain size target : %d\n", work32[2]); + seq_printf(seq, "SGL frag count : %d\n", work16[6]); + seq_printf(seq, "Max SGL frag count : %d\n", work16[7]); + seq_printf(seq, "SGL frag count target : %d\n", work16[8]); + +/* FIXME + if (d->i2oversion == 0x02) + { +*/ + seq_printf(seq, "SGL data alignment : %d\n", work16[8]); + seq_printf(seq, "SGL addr limit : %d\n", work8[20]); + seq_printf(seq, "SGL addr sizes supported : "); + if (work8[21] & 0x01) + seq_printf(seq, "32 bit "); + if (work8[21] & 0x02) + seq_printf(seq, "64 bit "); + if (work8[21] & 0x04) + seq_printf(seq, "96 bit "); + if (work8[21] & 0x08) + seq_printf(seq, "128 bit "); + seq_printf(seq, "\n"); +/* + } +*/ + + return 0; +} + +/* Generic group F200h - Sensors (scalar) */ +static int i2o_seq_show_sensors(struct seq_file *seq, void *v) +{ + struct i2o_device *d = (struct i2o_device *)seq->private; + int token; + + struct { + u16 sensor_instance; + u8 component; + u16 component_instance; + u8 sensor_class; + u8 sensor_type; + u8 scaling_exponent; + u32 actual_reading; + u32 minimum_reading; + u32 low2lowcat_treshold; + u32 lowcat2low_treshold; + u32 lowwarn2low_treshold; + u32 low2lowwarn_treshold; + u32 norm2lowwarn_treshold; + u32 lowwarn2norm_treshold; + u32 nominal_reading; + u32 hiwarn2norm_treshold; + u32 norm2hiwarn_treshold; + u32 high2hiwarn_treshold; + u32 hiwarn2high_treshold; + u32 hicat2high_treshold; + u32 hi2hicat_treshold; + u32 maximum_reading; + u8 sensor_state; + u16 event_enable; + } result; + + token = i2o_parm_field_get(d, 0xF200, -1, &result, sizeof(result)); + + if (token < 0) { + i2o_report_query_status(seq, token, + "0xF200 Sensors (optional)"); + return 0; + } + + seq_printf(seq, "Sensor instance : %d\n", result.sensor_instance); + + seq_printf(seq, "Component : %d = ", result.component); + switch (result.component) { + case 0: + seq_printf(seq, "Other"); + break; + case 1: + seq_printf(seq, "Planar logic Board"); + break; + case 2: + seq_printf(seq, "CPU"); + break; + case 3: + seq_printf(seq, "Chassis"); + break; + case 4: + seq_printf(seq, "Power Supply"); + break; + case 5: + seq_printf(seq, "Storage"); + break; + case 6: + seq_printf(seq, "External"); + break; + } + seq_printf(seq, "\n"); + + seq_printf(seq, "Component instance : %d\n", + result.component_instance); + seq_printf(seq, "Sensor class : %s\n", + result.sensor_class ? "Analog" : "Digital"); + + seq_printf(seq, "Sensor type : %d = ", result.sensor_type); + switch (result.sensor_type) { + case 0: + seq_printf(seq, "Other\n"); + break; + case 1: + seq_printf(seq, "Thermal\n"); + break; + case 2: + seq_printf(seq, "DC voltage (DC volts)\n"); + break; + case 3: + seq_printf(seq, "AC voltage (AC volts)\n"); + break; + case 4: + seq_printf(seq, "DC current (DC amps)\n"); + break; + case 5: + seq_printf(seq, "AC current (AC volts)\n"); + break; + case 6: + seq_printf(seq, "Door open\n"); + break; + case 7: + seq_printf(seq, "Fan operational\n"); + break; + } + + seq_printf(seq, "Scaling exponent : %d\n", + result.scaling_exponent); + seq_printf(seq, "Actual reading : %d\n", result.actual_reading); + seq_printf(seq, "Minimum reading : %d\n", result.minimum_reading); + seq_printf(seq, "Low2LowCat treshold : %d\n", + result.low2lowcat_treshold); + seq_printf(seq, "LowCat2Low treshold : %d\n", + result.lowcat2low_treshold); + seq_printf(seq, "LowWarn2Low treshold : %d\n", + result.lowwarn2low_treshold); + seq_printf(seq, "Low2LowWarn treshold : %d\n", + result.low2lowwarn_treshold); + seq_printf(seq, "Norm2LowWarn treshold : %d\n", + result.norm2lowwarn_treshold); + seq_printf(seq, "LowWarn2Norm treshold : %d\n", + result.lowwarn2norm_treshold); + seq_printf(seq, "Nominal reading : %d\n", result.nominal_reading); + seq_printf(seq, "HiWarn2Norm treshold : %d\n", + result.hiwarn2norm_treshold); + seq_printf(seq, "Norm2HiWarn treshold : %d\n", + result.norm2hiwarn_treshold); + seq_printf(seq, "High2HiWarn treshold : %d\n", + result.high2hiwarn_treshold); + seq_printf(seq, "HiWarn2High treshold : %d\n", + result.hiwarn2high_treshold); + seq_printf(seq, "HiCat2High treshold : %d\n", + result.hicat2high_treshold); + seq_printf(seq, "High2HiCat treshold : %d\n", + result.hi2hicat_treshold); + seq_printf(seq, "Maximum reading : %d\n", result.maximum_reading); + + seq_printf(seq, "Sensor state : %d = ", result.sensor_state); + switch (result.sensor_state) { + case 0: + seq_printf(seq, "Normal\n"); + break; + case 1: + seq_printf(seq, "Abnormal\n"); + break; + case 2: + seq_printf(seq, "Unknown\n"); + break; + case 3: + seq_printf(seq, "Low Catastrophic (LoCat)\n"); + break; + case 4: + seq_printf(seq, "Low (Low)\n"); + break; + case 5: + seq_printf(seq, "Low Warning (LoWarn)\n"); + break; + case 6: + seq_printf(seq, "High Warning (HiWarn)\n"); + break; + case 7: + seq_printf(seq, "High (High)\n"); + break; + case 8: + seq_printf(seq, "High Catastrophic (HiCat)\n"); + break; + } + + seq_printf(seq, "Event_enable : 0x%02X\n", result.event_enable); + seq_printf(seq, " [%s] Operational state change. \n", + (result.event_enable & 0x01) ? "+" : "-"); + seq_printf(seq, " [%s] Low catastrophic. \n", + (result.event_enable & 0x02) ? "+" : "-"); + seq_printf(seq, " [%s] Low reading. \n", + (result.event_enable & 0x04) ? "+" : "-"); + seq_printf(seq, " [%s] Low warning. \n", + (result.event_enable & 0x08) ? "+" : "-"); + seq_printf(seq, + " [%s] Change back to normal from out of range state. \n", + (result.event_enable & 0x10) ? "+" : "-"); + seq_printf(seq, " [%s] High warning. \n", + (result.event_enable & 0x20) ? "+" : "-"); + seq_printf(seq, " [%s] High reading. \n", + (result.event_enable & 0x40) ? "+" : "-"); + seq_printf(seq, " [%s] High catastrophic. \n", + (result.event_enable & 0x80) ? "+" : "-"); + + return 0; +} + +static int i2o_seq_open_hrt(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_hrt, PDE(inode)->data); +}; + +static int i2o_seq_open_lct(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_lct, PDE(inode)->data); +}; + +static int i2o_seq_open_status(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_status, PDE(inode)->data); +}; + +static int i2o_seq_open_hw(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_hw, PDE(inode)->data); +}; + +static int i2o_seq_open_ddm_table(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_ddm_table, PDE(inode)->data); +}; + +static int i2o_seq_open_driver_store(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_driver_store, PDE(inode)->data); +}; + +static int i2o_seq_open_drivers_stored(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_drivers_stored, PDE(inode)->data); +}; + +static int i2o_seq_open_groups(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_groups, PDE(inode)->data); +}; + +static int i2o_seq_open_phys_device(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_phys_device, PDE(inode)->data); +}; + +static int i2o_seq_open_claimed(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_claimed, PDE(inode)->data); +}; + +static int i2o_seq_open_users(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_users, PDE(inode)->data); +}; + +static int i2o_seq_open_priv_msgs(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_priv_msgs, PDE(inode)->data); +}; + +static int i2o_seq_open_authorized_users(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_authorized_users, + PDE(inode)->data); +}; + +static int i2o_seq_open_dev_identity(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_dev_identity, PDE(inode)->data); +}; + +static int i2o_seq_open_ddm_identity(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_ddm_identity, PDE(inode)->data); +}; + +static int i2o_seq_open_uinfo(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_uinfo, PDE(inode)->data); +}; + +static int i2o_seq_open_sgl_limits(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_sgl_limits, PDE(inode)->data); +}; + +static int i2o_seq_open_sensors(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_sensors, PDE(inode)->data); +}; + +static int i2o_seq_open_dev_name(struct inode *inode, struct file *file) +{ + return single_open(file, i2o_seq_show_dev_name, PDE(inode)->data); +}; + +static struct file_operations i2o_seq_fops_lct = { + .open = i2o_seq_open_lct, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_hrt = { + .open = i2o_seq_open_hrt, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_status = { + .open = i2o_seq_open_status, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_hw = { + .open = i2o_seq_open_hw, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_ddm_table = { + .open = i2o_seq_open_ddm_table, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_driver_store = { + .open = i2o_seq_open_driver_store, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_drivers_stored = { + .open = i2o_seq_open_drivers_stored, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_groups = { + .open = i2o_seq_open_groups, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_phys_device = { + .open = i2o_seq_open_phys_device, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_claimed = { + .open = i2o_seq_open_claimed, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_users = { + .open = i2o_seq_open_users, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_priv_msgs = { + .open = i2o_seq_open_priv_msgs, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_authorized_users = { + .open = i2o_seq_open_authorized_users, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_dev_name = { + .open = i2o_seq_open_dev_name, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_dev_identity = { + .open = i2o_seq_open_dev_identity, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_ddm_identity = { + .open = i2o_seq_open_ddm_identity, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_uinfo = { + .open = i2o_seq_open_uinfo, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_sgl_limits = { + .open = i2o_seq_open_sgl_limits, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct file_operations i2o_seq_fops_sensors = { + .open = i2o_seq_open_sensors, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/* + * IOP specific entries...write field just in case someone + * ever wants one. + */ +static i2o_proc_entry i2o_proc_generic_iop_entries[] = { + {"hrt", S_IFREG | S_IRUGO, &i2o_seq_fops_hrt}, + {"lct", S_IFREG | S_IRUGO, &i2o_seq_fops_lct}, + {"status", S_IFREG | S_IRUGO, &i2o_seq_fops_status}, + {"hw", S_IFREG | S_IRUGO, &i2o_seq_fops_hw}, + {"ddm_table", S_IFREG | S_IRUGO, &i2o_seq_fops_ddm_table}, + {"driver_store", S_IFREG | S_IRUGO, &i2o_seq_fops_driver_store}, + {"drivers_stored", S_IFREG | S_IRUGO, &i2o_seq_fops_drivers_stored}, + {NULL, 0, NULL} +}; + +/* + * Device specific entries + */ +static i2o_proc_entry generic_dev_entries[] = { + {"groups", S_IFREG | S_IRUGO, &i2o_seq_fops_groups}, + {"phys_dev", S_IFREG | S_IRUGO, &i2o_seq_fops_phys_device}, + {"claimed", S_IFREG | S_IRUGO, &i2o_seq_fops_claimed}, + {"users", S_IFREG | S_IRUGO, &i2o_seq_fops_users}, + {"priv_msgs", S_IFREG | S_IRUGO, &i2o_seq_fops_priv_msgs}, + {"authorized_users", S_IFREG | S_IRUGO, &i2o_seq_fops_authorized_users}, + {"dev_identity", S_IFREG | S_IRUGO, &i2o_seq_fops_dev_identity}, + {"ddm_identity", S_IFREG | S_IRUGO, &i2o_seq_fops_ddm_identity}, + {"user_info", S_IFREG | S_IRUGO, &i2o_seq_fops_uinfo}, + {"sgl_limits", S_IFREG | S_IRUGO, &i2o_seq_fops_sgl_limits}, + {"sensors", S_IFREG | S_IRUGO, &i2o_seq_fops_sensors}, + {NULL, 0, NULL} +}; + +/* + * Storage unit specific entries (SCSI Periph, BS) with device names + */ +static i2o_proc_entry rbs_dev_entries[] = { + {"dev_name", S_IFREG | S_IRUGO, &i2o_seq_fops_dev_name}, + {NULL, 0, NULL} +}; + +/** + * i2o_proc_create_entries - Creates proc dir entries + * @dir: proc dir entry under which the entries should be placed + * @i2o_pe: pointer to the entries which should be added + * @data: pointer to I2O controller or device + * + * Create proc dir entries for a I2O controller or I2O device. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_proc_create_entries(struct proc_dir_entry *dir, + i2o_proc_entry * i2o_pe, void *data) +{ + struct proc_dir_entry *tmp; + + while (i2o_pe->name) { + tmp = create_proc_entry(i2o_pe->name, i2o_pe->mode, dir); + if (!tmp) + return -1; + + tmp->data = data; + tmp->proc_fops = i2o_pe->fops; + + i2o_pe++; + } + + return 0; +} + +/** + * i2o_proc_subdir_remove - Remove child entries from a proc entry + * @dir: proc dir entry from which the childs should be removed + * + * Iterate over each i2o proc entry under dir and remove it. If the child + * also has entries, remove them too. + */ +static void i2o_proc_subdir_remove(struct proc_dir_entry *dir) +{ + struct proc_dir_entry *pe, *tmp; + pe = dir->subdir; + while (pe) { + tmp = pe->next; + i2o_proc_subdir_remove(pe); + remove_proc_entry(pe->name, dir); + pe = tmp; + } +}; + +/** + * i2o_proc_device_add - Add an I2O device to the proc dir + * @dir: proc dir entry to which the device should be added + * @dev: I2O device which should be added + * + * Add an I2O device to the proc dir entry dir and create the entries for + * the device depending on the class of the I2O device. + */ +static void i2o_proc_device_add(struct proc_dir_entry *dir, + struct i2o_device *dev) +{ + char buff[10]; + struct proc_dir_entry *devdir; + i2o_proc_entry *i2o_pe = NULL; + + sprintf(buff, "%03x", dev->lct_data.tid); + + osm_debug("adding device /proc/i2o/%s/%s\n", dev->iop->name, buff); + + devdir = proc_mkdir(buff, dir); + if (!devdir) { + osm_warn("Could not allocate procdir!\n"); + return; + } + + devdir->data = dev; + + i2o_proc_create_entries(devdir, generic_dev_entries, dev); + + /* Inform core that we want updates about this device's status */ + switch (dev->lct_data.class_id) { + case I2O_CLASS_SCSI_PERIPHERAL: + case I2O_CLASS_RANDOM_BLOCK_STORAGE: + i2o_pe = rbs_dev_entries; + break; + default: + break; + } + if (i2o_pe) + i2o_proc_create_entries(devdir, i2o_pe, dev); +} + +/** + * i2o_proc_iop_add - Add an I2O controller to the i2o proc tree + * @dir: parent proc dir entry + * @c: I2O controller which should be added + * + * Add the entries to the parent proc dir entry. Also each device is added + * to the controllers proc dir entry. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_proc_iop_add(struct proc_dir_entry *dir, + struct i2o_controller *c) +{ + struct proc_dir_entry *iopdir; + struct i2o_device *dev; + + osm_debug("adding IOP /proc/i2o/%s\n", c->name); + + iopdir = proc_mkdir(c->name, dir); + if (!iopdir) + return -1; + + iopdir->data = c; + + i2o_proc_create_entries(iopdir, i2o_proc_generic_iop_entries, c); + + list_for_each_entry(dev, &c->devices, list) + i2o_proc_device_add(iopdir, dev); + + return 0; +} + +/** + * i2o_proc_iop_remove - Removes an I2O controller from the i2o proc tree + * @dir: parent proc dir entry + * @c: I2O controller which should be removed + * + * Iterate over each i2o proc entry and search controller c. If it is found + * remove it from the tree. + */ +static void i2o_proc_iop_remove(struct proc_dir_entry *dir, + struct i2o_controller *c) +{ + struct proc_dir_entry *pe, *tmp; + + pe = dir->subdir; + while (pe) { + tmp = pe->next; + if (pe->data == c) { + i2o_proc_subdir_remove(pe); + remove_proc_entry(pe->name, dir); + } + osm_debug("removing IOP /proc/i2o/%s\n", c->name); + pe = tmp; + } +} + +/** + * i2o_proc_fs_create - Create the i2o proc fs. + * + * Iterate over each I2O controller and create the entries for it. + * + * Returns 0 on success or negative error code on failure. + */ +static int __init i2o_proc_fs_create(void) +{ + struct i2o_controller *c; + + i2o_proc_dir_root = proc_mkdir("i2o", NULL); + if (!i2o_proc_dir_root) + return -1; + + i2o_proc_dir_root->owner = THIS_MODULE; + + list_for_each_entry(c, &i2o_controllers, list) + i2o_proc_iop_add(i2o_proc_dir_root, c); + + return 0; +}; + +/** + * i2o_proc_fs_destroy - Cleanup the all i2o proc entries + * + * Iterate over each I2O controller and remove the entries for it. + * + * Returns 0 on success or negative error code on failure. + */ +static int __exit i2o_proc_fs_destroy(void) +{ + struct i2o_controller *c; + + list_for_each_entry(c, &i2o_controllers, list) + i2o_proc_iop_remove(i2o_proc_dir_root, c); + + remove_proc_entry("i2o", NULL); + + return 0; +}; + +/** + * i2o_proc_init - Init function for procfs + * + * Registers Proc OSM and creates procfs entries. + * + * Returns 0 on success or negative error code on failure. + */ +static int __init i2o_proc_init(void) +{ + int rc; + + printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); + + rc = i2o_driver_register(&i2o_proc_driver); + if (rc) + return rc; + + rc = i2o_proc_fs_create(); + if (rc) { + i2o_driver_unregister(&i2o_proc_driver); + return rc; + } + + return 0; +}; + +/** + * i2o_proc_exit - Exit function for procfs + * + * Unregisters Proc OSM and removes procfs entries. + */ +static void __exit i2o_proc_exit(void) +{ + i2o_driver_unregister(&i2o_proc_driver); + i2o_proc_fs_destroy(); +}; + +MODULE_AUTHOR("Deepak Saxena"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(OSM_DESCRIPTION); +MODULE_VERSION(OSM_VERSION); + +module_init(i2o_proc_init); +module_exit(i2o_proc_exit); diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c new file mode 100644 index 000000000000..43f5875e0be5 --- /dev/null +++ b/drivers/message/i2o/i2o_scsi.c @@ -0,0 +1,830 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * For the avoidance of doubt the "preferred form" of this code is one which + * is in an open non patent encumbered format. Where cryptographic key signing + * forms part of the process of creating an executable the information + * including keys needed to generate an equivalently functional executable + * are deemed to be part of the source code. + * + * Complications for I2O scsi + * + * o Each (bus,lun) is a logical device in I2O. We keep a map + * table. We spoof failed selection for unmapped units + * o Request sense buffers can come back for free. + * o Scatter gather is a bit dynamic. We have to investigate at + * setup time. + * o Some of our resources are dynamically shared. The i2o core + * needs a message reservation protocol to avoid swap v net + * deadlocking. We need to back off queue requests. + * + * In general the firmware wants to help. Where its help isn't performance + * useful we just ignore the aid. Its not worth the code in truth. + * + * Fixes/additions: + * Steve Ralston: + * Scatter gather now works + * Markus Lidel <Markus.Lidel@shadowconnect.com>: + * Minor fixes for 2.6. + * + * To Do: + * 64bit cleanups + * Fix the resource management problems. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/jiffies.h> +#include <linux/interrupt.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/pci.h> +#include <linux/blkdev.h> +#include <linux/i2o.h> + +#include <asm/dma.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/atomic.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_cmnd.h> + +#define OSM_NAME "scsi-osm" +#define OSM_VERSION "$Rev$" +#define OSM_DESCRIPTION "I2O SCSI Peripheral OSM" + +static struct i2o_driver i2o_scsi_driver; + +static int i2o_scsi_max_id = 16; +static int i2o_scsi_max_lun = 8; + +struct i2o_scsi_host { + struct Scsi_Host *scsi_host; /* pointer to the SCSI host */ + struct i2o_controller *iop; /* pointer to the I2O controller */ + struct i2o_device *channel[0]; /* channel->i2o_dev mapping table */ +}; + +static struct scsi_host_template i2o_scsi_host_template; + +#define I2O_SCSI_CAN_QUEUE 4 + +/* SCSI OSM class handling definition */ +static struct i2o_class_id i2o_scsi_class_id[] = { + {I2O_CLASS_SCSI_PERIPHERAL}, + {I2O_CLASS_END} +}; + +static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c) +{ + struct i2o_scsi_host *i2o_shost; + struct i2o_device *i2o_dev; + struct Scsi_Host *scsi_host; + int max_channel = 0; + u8 type; + int i; + size_t size; + i2o_status_block *sb; + + list_for_each_entry(i2o_dev, &c->devices, list) + if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER_PORT) { + if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) || (type == 1)) /* SCSI bus */ + max_channel++; + } + + if (!max_channel) { + osm_warn("no channels found on %s\n", c->name); + return ERR_PTR(-EFAULT); + } + + size = max_channel * sizeof(struct i2o_device *) + + sizeof(struct i2o_scsi_host); + + scsi_host = scsi_host_alloc(&i2o_scsi_host_template, size); + if (!scsi_host) { + osm_warn("Could not allocate SCSI host\n"); + return ERR_PTR(-ENOMEM); + } + + scsi_host->max_channel = max_channel - 1; + scsi_host->max_id = i2o_scsi_max_id; + scsi_host->max_lun = i2o_scsi_max_lun; + scsi_host->this_id = c->unit; + + sb = c->status_block.virt; + + scsi_host->sg_tablesize = (sb->inbound_frame_size - + sizeof(struct i2o_message) / 4 - 6) / 2; + + i2o_shost = (struct i2o_scsi_host *)scsi_host->hostdata; + i2o_shost->scsi_host = scsi_host; + i2o_shost->iop = c; + + i = 0; + list_for_each_entry(i2o_dev, &c->devices, list) + if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER_PORT) { + if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) || (type == 1)) /* only SCSI bus */ + i2o_shost->channel[i++] = i2o_dev; + + if (i >= max_channel) + break; + } + + return i2o_shost; +}; + +/** + * i2o_scsi_get_host - Get an I2O SCSI host + * @c: I2O controller to for which to get the SCSI host + * + * If the I2O controller already exists as SCSI host, the SCSI host + * is returned, otherwise the I2O controller is added to the SCSI + * core. + * + * Returns pointer to the I2O SCSI host on success or NULL on failure. + */ +static struct i2o_scsi_host *i2o_scsi_get_host(struct i2o_controller *c) +{ + return c->driver_data[i2o_scsi_driver.context]; +}; + +/** + * i2o_scsi_remove - Remove I2O device from SCSI core + * @dev: device which should be removed + * + * Removes the I2O device from the SCSI core again. + * + * Returns 0 on success. + */ +static int i2o_scsi_remove(struct device *dev) +{ + struct i2o_device *i2o_dev = to_i2o_device(dev); + struct i2o_controller *c = i2o_dev->iop; + struct i2o_scsi_host *i2o_shost; + struct scsi_device *scsi_dev; + + i2o_shost = i2o_scsi_get_host(c); + + shost_for_each_device(scsi_dev, i2o_shost->scsi_host) + if (scsi_dev->hostdata == i2o_dev) { + scsi_remove_device(scsi_dev); + scsi_device_put(scsi_dev); + break; + } + + return 0; +}; + +/** + * i2o_scsi_probe - verify if dev is a I2O SCSI device and install it + * @dev: device to verify if it is a I2O SCSI device + * + * Retrieve channel, id and lun for I2O device. If everthing goes well + * register the I2O device as SCSI device on the I2O SCSI controller. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_scsi_probe(struct device *dev) +{ + struct i2o_device *i2o_dev = to_i2o_device(dev); + struct i2o_controller *c = i2o_dev->iop; + struct i2o_scsi_host *i2o_shost; + struct Scsi_Host *scsi_host; + struct i2o_device *parent; + struct scsi_device *scsi_dev; + u32 id; + u64 lun; + int channel = -1; + int i; + + i2o_shost = i2o_scsi_get_host(c); + if (!i2o_shost) + return -EFAULT; + + scsi_host = i2o_shost->scsi_host; + + if (i2o_parm_field_get(i2o_dev, 0, 3, &id, 4) < 0) + return -EFAULT; + + if (id >= scsi_host->max_id) { + osm_warn("SCSI device id (%d) >= max_id of I2O host (%d)", id, + scsi_host->max_id); + return -EFAULT; + } + + if (i2o_parm_field_get(i2o_dev, 0, 4, &lun, 8) < 0) + return -EFAULT; + if (lun >= scsi_host->max_lun) { + osm_warn("SCSI device id (%d) >= max_lun of I2O host (%d)", + (unsigned int)lun, scsi_host->max_lun); + return -EFAULT; + } + + parent = i2o_iop_find_device(c, i2o_dev->lct_data.parent_tid); + if (!parent) { + osm_warn("can not find parent of device %03x\n", + i2o_dev->lct_data.tid); + return -EFAULT; + } + + for (i = 0; i <= i2o_shost->scsi_host->max_channel; i++) + if (i2o_shost->channel[i] == parent) + channel = i; + + if (channel == -1) { + osm_warn("can not find channel of device %03x\n", + i2o_dev->lct_data.tid); + return -EFAULT; + } + + scsi_dev = + __scsi_add_device(i2o_shost->scsi_host, channel, id, lun, i2o_dev); + + if (!scsi_dev) { + osm_warn("can not add SCSI device %03x\n", + i2o_dev->lct_data.tid); + return -EFAULT; + } + + osm_debug("added new SCSI device %03x (cannel: %d, id: %d, lun: %d)\n", + i2o_dev->lct_data.tid, channel, id, (unsigned int)lun); + + return 0; +}; + +static const char *i2o_scsi_info(struct Scsi_Host *SChost) +{ + struct i2o_scsi_host *hostdata; + hostdata = (struct i2o_scsi_host *)SChost->hostdata; + return hostdata->iop->name; +} + +/** + * i2o_scsi_reply - SCSI OSM message reply handler + * @c: controller issuing the reply + * @m: message id for flushing + * @msg: the message from the controller + * + * Process reply messages (interrupts in normal scsi controller think). + * We can get a variety of messages to process. The normal path is + * scsi command completions. We must also deal with IOP failures, + * the reply to a bus reset and the reply to a LUN query. + * + * Returns 0 on success and if the reply should not be flushed or > 0 + * on success and if the reply should be flushed. Returns negative error + * code on failure and if the reply should be flushed. + */ +static int i2o_scsi_reply(struct i2o_controller *c, u32 m, + struct i2o_message *msg) +{ + struct scsi_cmnd *cmd; + struct device *dev; + u8 as, ds, st; + + cmd = i2o_cntxt_list_get(c, le32_to_cpu(msg->u.s.tcntxt)); + + if (msg->u.head[0] & (1 << 13)) { + struct i2o_message __iomem *pmsg; /* preserved message */ + u32 pm; + int err = DID_ERROR; + + pm = le32_to_cpu(msg->body[3]); + + pmsg = i2o_msg_in_to_virt(c, pm); + + osm_err("IOP fail.\n"); + osm_err("From %d To %d Cmd %d.\n", + (msg->u.head[1] >> 12) & 0xFFF, + msg->u.head[1] & 0xFFF, msg->u.head[1] >> 24); + osm_err("Failure Code %d.\n", msg->body[0] >> 24); + if (msg->body[0] & (1 << 16)) + osm_err("Format error.\n"); + if (msg->body[0] & (1 << 17)) + osm_err("Path error.\n"); + if (msg->body[0] & (1 << 18)) + osm_err("Path State.\n"); + if (msg->body[0] & (1 << 18)) + { + osm_err("Congestion.\n"); + err = DID_BUS_BUSY; + } + + osm_debug("Failing message is %p.\n", pmsg); + + cmd = i2o_cntxt_list_get(c, readl(&pmsg->u.s.tcntxt)); + if (!cmd) + return 1; + + cmd->result = err << 16; + cmd->scsi_done(cmd); + + /* Now flush the message by making it a NOP */ + i2o_msg_nop(c, pm); + + return 1; + } + + /* + * Low byte is device status, next is adapter status, + * (then one byte reserved), then request status. + */ + ds = (u8) le32_to_cpu(msg->body[0]); + as = (u8) (le32_to_cpu(msg->body[0]) >> 8); + st = (u8) (le32_to_cpu(msg->body[0]) >> 24); + + /* + * Is this a control request coming back - eg an abort ? + */ + + if (!cmd) { + if (st) + osm_warn("SCSI abort: %08X", le32_to_cpu(msg->body[0])); + osm_info("SCSI abort completed.\n"); + return -EFAULT; + } + + osm_debug("Completed %ld\n", cmd->serial_number); + + if (st) { + u32 count, error; + /* An error has occurred */ + + switch (st) { + case 0x06: + count = le32_to_cpu(msg->body[1]); + if (count < cmd->underflow) { + int i; + + osm_err("SCSI underflow 0x%08X 0x%08X\n", count, + cmd->underflow); + osm_debug("Cmd: "); + for (i = 0; i < 15; i++) + pr_debug("%02X ", cmd->cmnd[i]); + pr_debug(".\n"); + cmd->result = (DID_ERROR << 16); + } + break; + + default: + error = le32_to_cpu(msg->body[0]); + + osm_err("SCSI error %08x\n", error); + + if ((error & 0xff) == 0x02 /*CHECK_CONDITION */ ) { + int i; + u32 len = sizeof(cmd->sense_buffer); + len = (len > 40) ? 40 : len; + // Copy over the sense data + memcpy(cmd->sense_buffer, (void *)&msg->body[3], + len); + for (i = 0; i <= len; i++) + osm_info("%02x\n", + cmd->sense_buffer[i]); + if (cmd->sense_buffer[0] == 0x70 + && cmd->sense_buffer[2] == DATA_PROTECT) { + /* This is to handle an array failed */ + cmd->result = (DID_TIME_OUT << 16); + printk(KERN_WARNING "%s: SCSI Data " + "Protect-Device (%d,%d,%d) " + "hba_status=0x%x, dev_status=" + "0x%x, cmd=0x%x\n", c->name, + (u32) cmd->device->channel, + (u32) cmd->device->id, + (u32) cmd->device->lun, + (error >> 8) & 0xff, + error & 0xff, cmd->cmnd[0]); + } else + cmd->result = (DID_ERROR << 16); + + break; + } + + switch (as) { + case 0x0E: + /* SCSI Reset */ + cmd->result = DID_RESET << 16; + break; + + case 0x0F: + cmd->result = DID_PARITY << 16; + break; + + default: + cmd->result = DID_ERROR << 16; + break; + } + + break; + } + + cmd->scsi_done(cmd); + return 1; + } + + cmd->result = DID_OK << 16 | ds; + + cmd->scsi_done(cmd); + + dev = &c->pdev->dev; + if (cmd->use_sg) + dma_unmap_sg(dev, (struct scatterlist *)cmd->buffer, + cmd->use_sg, cmd->sc_data_direction); + else if (cmd->request_bufflen) + dma_unmap_single(dev, (dma_addr_t) ((long)cmd->SCp.ptr), + cmd->request_bufflen, cmd->sc_data_direction); + + return 1; +}; + +/** + * i2o_scsi_notify_controller_add - Retrieve notifications of added + * controllers + * @c: the controller which was added + * + * If a I2O controller is added, we catch the notification to add a + * corresponding Scsi_Host. + */ +static void i2o_scsi_notify_controller_add(struct i2o_controller *c) +{ + struct i2o_scsi_host *i2o_shost; + int rc; + + i2o_shost = i2o_scsi_host_alloc(c); + if (IS_ERR(i2o_shost)) { + osm_err("Could not initialize SCSI host\n"); + return; + } + + rc = scsi_add_host(i2o_shost->scsi_host, &c->device); + if (rc) { + osm_err("Could not add SCSI host\n"); + scsi_host_put(i2o_shost->scsi_host); + return; + } + + c->driver_data[i2o_scsi_driver.context] = i2o_shost; + + osm_debug("new I2O SCSI host added\n"); +}; + +/** + * i2o_scsi_notify_controller_remove - Retrieve notifications of removed + * controllers + * @c: the controller which was removed + * + * If a I2O controller is removed, we catch the notification to remove the + * corresponding Scsi_Host. + */ +static void i2o_scsi_notify_controller_remove(struct i2o_controller *c) +{ + struct i2o_scsi_host *i2o_shost; + i2o_shost = i2o_scsi_get_host(c); + if (!i2o_shost) + return; + + c->driver_data[i2o_scsi_driver.context] = NULL; + + scsi_remove_host(i2o_shost->scsi_host); + scsi_host_put(i2o_shost->scsi_host); + pr_info("I2O SCSI host removed\n"); +}; + +/* SCSI OSM driver struct */ +static struct i2o_driver i2o_scsi_driver = { + .name = OSM_NAME, + .reply = i2o_scsi_reply, + .classes = i2o_scsi_class_id, + .notify_controller_add = i2o_scsi_notify_controller_add, + .notify_controller_remove = i2o_scsi_notify_controller_remove, + .driver = { + .probe = i2o_scsi_probe, + .remove = i2o_scsi_remove, + }, +}; + +/** + * i2o_scsi_queuecommand - queue a SCSI command + * @SCpnt: scsi command pointer + * @done: callback for completion + * + * Issue a scsi command asynchronously. Return 0 on success or 1 if + * we hit an error (normally message queue congestion). The only + * minor complication here is that I2O deals with the device addressing + * so we have to map the bus/dev/lun back to an I2O handle as well + * as faking absent devices ourself. + * + * Locks: takes the controller lock on error path only + */ + +static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, + void (*done) (struct scsi_cmnd *)) +{ + struct i2o_controller *c; + struct Scsi_Host *host; + struct i2o_device *i2o_dev; + struct device *dev; + int tid; + struct i2o_message __iomem *msg; + u32 m; + u32 scsi_flags, sg_flags; + u32 __iomem *mptr; + u32 __iomem *lenptr; + u32 len, reqlen; + int i; + + /* + * Do the incoming paperwork + */ + + i2o_dev = SCpnt->device->hostdata; + host = SCpnt->device->host; + c = i2o_dev->iop; + dev = &c->pdev->dev; + + SCpnt->scsi_done = done; + + if (unlikely(!i2o_dev)) { + osm_warn("no I2O device in request\n"); + SCpnt->result = DID_NO_CONNECT << 16; + done(SCpnt); + return 0; + } + + tid = i2o_dev->lct_data.tid; + + osm_debug("qcmd: Tid = %03x\n", tid); + osm_debug("Real scsi messages.\n"); + + /* + * Obtain an I2O message. If there are none free then + * throw it back to the scsi layer + */ + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return SCSI_MLQUEUE_HOST_BUSY; + + /* + * Put together a scsi execscb message + */ + + len = SCpnt->request_bufflen; + + switch (SCpnt->sc_data_direction) { + case PCI_DMA_NONE: + scsi_flags = 0x00000000; // DATA NO XFER + sg_flags = 0x00000000; + break; + + case PCI_DMA_TODEVICE: + scsi_flags = 0x80000000; // DATA OUT (iop-->dev) + sg_flags = 0x14000000; + break; + + case PCI_DMA_FROMDEVICE: + scsi_flags = 0x40000000; // DATA IN (iop<--dev) + sg_flags = 0x10000000; + break; + + default: + /* Unknown - kill the command */ + SCpnt->result = DID_NO_CONNECT << 16; + done(SCpnt); + return 0; + } + + writel(I2O_CMD_SCSI_EXEC << 24 | HOST_TID << 12 | tid, &msg->u.head[1]); + writel(i2o_scsi_driver.context, &msg->u.s.icntxt); + + /* We want the SCSI control block back */ + writel(i2o_cntxt_list_add(c, SCpnt), &msg->u.s.tcntxt); + + /* LSI_920_PCI_QUIRK + * + * Intermittant observations of msg frame word data corruption + * observed on msg[4] after: + * WRITE, READ-MODIFY-WRITE + * operations. 19990606 -sralston + * + * (Hence we build this word via tag. Its good practice anyway + * we don't want fetches over PCI needlessly) + */ + + /* Attach tags to the devices */ + /* + if(SCpnt->device->tagged_supported) { + if(SCpnt->tag == HEAD_OF_QUEUE_TAG) + scsi_flags |= 0x01000000; + else if(SCpnt->tag == ORDERED_QUEUE_TAG) + scsi_flags |= 0x01800000; + } + */ + + /* Direction, disconnect ok, tag, CDBLen */ + writel(scsi_flags | 0x20200000 | SCpnt->cmd_len, &msg->body[0]); + + mptr = &msg->body[1]; + + /* Write SCSI command into the message - always 16 byte block */ + memcpy_toio(mptr, SCpnt->cmnd, 16); + mptr += 4; + lenptr = mptr++; /* Remember me - fill in when we know */ + + reqlen = 12; // SINGLE SGE + + /* Now fill in the SGList and command */ + if (SCpnt->use_sg) { + struct scatterlist *sg; + int sg_count; + + sg = SCpnt->request_buffer; + len = 0; + + sg_count = dma_map_sg(dev, sg, SCpnt->use_sg, + SCpnt->sc_data_direction); + + if (unlikely(sg_count <= 0)) + return -ENOMEM; + + for (i = SCpnt->use_sg; i > 0; i--) { + if (i == 1) + sg_flags |= 0xC0000000; + writel(sg_flags | sg_dma_len(sg), mptr++); + writel(sg_dma_address(sg), mptr++); + len += sg_dma_len(sg); + sg++; + } + + reqlen = mptr - &msg->u.head[0]; + writel(len, lenptr); + } else { + len = SCpnt->request_bufflen; + + writel(len, lenptr); + + if (len > 0) { + dma_addr_t dma_addr; + + dma_addr = dma_map_single(dev, SCpnt->request_buffer, + SCpnt->request_bufflen, + SCpnt->sc_data_direction); + if (!dma_addr) + return -ENOMEM; + + SCpnt->SCp.ptr = (void *)(unsigned long)dma_addr; + sg_flags |= 0xC0000000; + writel(sg_flags | SCpnt->request_bufflen, mptr++); + writel(dma_addr, mptr++); + } else + reqlen = 9; + } + + /* Stick the headers on */ + writel(reqlen << 16 | SGL_OFFSET_10, &msg->u.head[0]); + + /* Queue the message */ + i2o_msg_post(c, m); + + osm_debug("Issued %ld\n", SCpnt->serial_number); + + return 0; +}; + +/** + * i2o_scsi_abort - abort a running command + * @SCpnt: command to abort + * + * Ask the I2O controller to abort a command. This is an asynchrnous + * process and our callback handler will see the command complete with an + * aborted message if it succeeds. + * + * Returns 0 if the command is successfully aborted or negative error code + * on failure. + */ +static int i2o_scsi_abort(struct scsi_cmnd *SCpnt) +{ + struct i2o_device *i2o_dev; + struct i2o_controller *c; + struct i2o_message __iomem *msg; + u32 m; + int tid; + int status = FAILED; + + osm_warn("Aborting command block.\n"); + + i2o_dev = SCpnt->device->hostdata; + c = i2o_dev->iop; + tid = i2o_dev->lct_data.tid; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return SCSI_MLQUEUE_HOST_BUSY; + + writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_SCSI_ABORT << 24 | HOST_TID << 12 | tid, + &msg->u.head[1]); + writel(i2o_cntxt_list_get_ptr(c, SCpnt), &msg->body[0]); + + if (i2o_msg_post_wait(c, m, I2O_TIMEOUT_SCSI_SCB_ABORT)) + status = SUCCESS; + + return status; +} + +/** + * i2o_scsi_bios_param - Invent disk geometry + * @sdev: scsi device + * @dev: block layer device + * @capacity: size in sectors + * @ip: geometry array + * + * This is anyones guess quite frankly. We use the same rules everyone + * else appears to and hope. It seems to work. + */ + +static int i2o_scsi_bios_param(struct scsi_device *sdev, + struct block_device *dev, sector_t capacity, + int *ip) +{ + int size; + + size = capacity; + ip[0] = 64; /* heads */ + ip[1] = 32; /* sectors */ + if ((ip[2] = size >> 11) > 1024) { /* cylinders, test for big disk */ + ip[0] = 255; /* heads */ + ip[1] = 63; /* sectors */ + ip[2] = size / (255 * 63); /* cylinders */ + } + return 0; +} + +static struct scsi_host_template i2o_scsi_host_template = { + .proc_name = OSM_NAME, + .name = OSM_DESCRIPTION, + .info = i2o_scsi_info, + .queuecommand = i2o_scsi_queuecommand, + .eh_abort_handler = i2o_scsi_abort, + .bios_param = i2o_scsi_bios_param, + .can_queue = I2O_SCSI_CAN_QUEUE, + .sg_tablesize = 8, + .cmd_per_lun = 6, + .use_clustering = ENABLE_CLUSTERING, +}; + +/** + * i2o_scsi_init - SCSI OSM initialization function + * + * Register SCSI OSM into I2O core. + * + * Returns 0 on success or negative error code on failure. + */ +static int __init i2o_scsi_init(void) +{ + int rc; + + printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); + + /* Register SCSI OSM into I2O core */ + rc = i2o_driver_register(&i2o_scsi_driver); + if (rc) { + osm_err("Could not register SCSI driver\n"); + return rc; + } + + return 0; +}; + +/** + * i2o_scsi_exit - SCSI OSM exit function + * + * Unregisters SCSI OSM from I2O core. + */ +static void __exit i2o_scsi_exit(void) +{ + /* Unregister I2O SCSI OSM from I2O core */ + i2o_driver_unregister(&i2o_scsi_driver); +}; + +MODULE_AUTHOR("Red Hat Software"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(OSM_DESCRIPTION); +MODULE_VERSION(OSM_VERSION); + +module_init(i2o_scsi_init); +module_exit(i2o_scsi_exit); diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c new file mode 100644 index 000000000000..50c8cedf7a2d --- /dev/null +++ b/drivers/message/i2o/iop.c @@ -0,0 +1,1327 @@ +/* + * Functions to handle I2O controllers and I2O message handling + * + * Copyright (C) 1999-2002 Red Hat Software + * + * Written by Alan Cox, Building Number Three Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * A lot of the I2O message side code from this is taken from the + * Red Creek RCPCI45 adapter driver by Red Creek Communications + * + * Fixes/additions: + * Philipp Rumpf + * Juha Sievänen <Juha.Sievanen@cs.Helsinki.FI> + * Auvo Häkkinen <Auvo.Hakkinen@cs.Helsinki.FI> + * Deepak Saxena <deepak@plexity.net> + * Boji T Kannanthanam <boji.t.kannanthanam@intel.com> + * Alan Cox <alan@redhat.com>: + * Ported to Linux 2.5. + * Markus Lidel <Markus.Lidel@shadowconnect.com>: + * Minor fixes for 2.6. + */ + +#include <linux/module.h> +#include <linux/i2o.h> +#include <linux/delay.h> + +#define OSM_VERSION "$Rev$" +#define OSM_DESCRIPTION "I2O subsystem" + +/* global I2O controller list */ +LIST_HEAD(i2o_controllers); + +/* + * global I2O System Table. Contains information about all the IOPs in the + * system. Used to inform IOPs about each others existence. + */ +static struct i2o_dma i2o_systab; + +static int i2o_hrt_get(struct i2o_controller *c); + +/* Module internal functions from other sources */ +extern struct i2o_driver i2o_exec_driver; +extern int i2o_exec_lct_get(struct i2o_controller *); +extern void i2o_device_remove(struct i2o_device *); + +extern int __init i2o_driver_init(void); +extern void __exit i2o_driver_exit(void); +extern int __init i2o_exec_init(void); +extern void __exit i2o_exec_exit(void); +extern int __init i2o_pci_init(void); +extern void __exit i2o_pci_exit(void); +extern int i2o_device_init(void); +extern void i2o_device_exit(void); + +/** + * i2o_msg_nop - Returns a message which is not used + * @c: I2O controller from which the message was created + * @m: message which should be returned + * + * If you fetch a message via i2o_msg_get, and can't use it, you must + * return the message with this function. Otherwise the message frame + * is lost. + */ +void i2o_msg_nop(struct i2o_controller *c, u32 m) +{ + struct i2o_message __iomem *msg = c->in_queue.virt + m; + + writel(THREE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_UTIL_NOP << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + writel(0, &msg->u.head[2]); + writel(0, &msg->u.head[3]); + i2o_msg_post(c, m); +}; + +/** + * i2o_msg_get_wait - obtain an I2O message from the IOP + * @c: I2O controller + * @msg: pointer to a I2O message pointer + * @wait: how long to wait until timeout + * + * This function waits up to wait seconds for a message slot to be + * available. + * + * On a success the message is returned and the pointer to the message is + * set in msg. The returned message is the physical page frame offset + * address from the read port (see the i2o spec). If no message is + * available returns I2O_QUEUE_EMPTY and msg is leaved untouched. + */ +u32 i2o_msg_get_wait(struct i2o_controller *c, struct i2o_message __iomem **msg, + int wait) +{ + unsigned long timeout = jiffies + wait * HZ; + u32 m; + + while ((m = i2o_msg_get(c, msg)) == I2O_QUEUE_EMPTY) { + if (time_after(jiffies, timeout)) { + pr_debug("%s: Timeout waiting for message frame.\n", + c->name); + return I2O_QUEUE_EMPTY; + } + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(1); + } + + return m; +}; + +#if BITS_PER_LONG == 64 +/** + * i2o_cntxt_list_add - Append a pointer to context list and return a id + * @c: controller to which the context list belong + * @ptr: pointer to add to the context list + * + * Because the context field in I2O is only 32-bit large, on 64-bit the + * pointer is to large to fit in the context field. The i2o_cntxt_list + * functions therefore map pointers to context fields. + * + * Returns context id > 0 on success or 0 on failure. + */ +u32 i2o_cntxt_list_add(struct i2o_controller * c, void *ptr) +{ + struct i2o_context_list_element *entry; + unsigned long flags; + + if (!ptr) + printk(KERN_ERR "%s: couldn't add NULL pointer to context list!" + "\n", c->name); + + entry = kmalloc(sizeof(*entry), GFP_ATOMIC); + if (!entry) { + printk(KERN_ERR "%s: Could not allocate memory for context " + "list element\n", c->name); + return 0; + } + + entry->ptr = ptr; + entry->timestamp = jiffies; + INIT_LIST_HEAD(&entry->list); + + spin_lock_irqsave(&c->context_list_lock, flags); + + if (unlikely(atomic_inc_and_test(&c->context_list_counter))) + atomic_inc(&c->context_list_counter); + + entry->context = atomic_read(&c->context_list_counter); + + list_add(&entry->list, &c->context_list); + + spin_unlock_irqrestore(&c->context_list_lock, flags); + + pr_debug("%s: Add context to list %p -> %d\n", c->name, ptr, context); + + return entry->context; +}; + +/** + * i2o_cntxt_list_remove - Remove a pointer from the context list + * @c: controller to which the context list belong + * @ptr: pointer which should be removed from the context list + * + * Removes a previously added pointer from the context list and returns + * the matching context id. + * + * Returns context id on succes or 0 on failure. + */ +u32 i2o_cntxt_list_remove(struct i2o_controller * c, void *ptr) +{ + struct i2o_context_list_element *entry; + u32 context = 0; + unsigned long flags; + + spin_lock_irqsave(&c->context_list_lock, flags); + list_for_each_entry(entry, &c->context_list, list) + if (entry->ptr == ptr) { + list_del(&entry->list); + context = entry->context; + kfree(entry); + break; + } + spin_unlock_irqrestore(&c->context_list_lock, flags); + + if (!context) + printk(KERN_WARNING "%s: Could not remove nonexistent ptr " + "%p\n", c->name, ptr); + + pr_debug("%s: remove ptr from context list %d -> %p\n", c->name, + context, ptr); + + return context; +}; + +/** + * i2o_cntxt_list_get - Get a pointer from the context list and remove it + * @c: controller to which the context list belong + * @context: context id to which the pointer belong + * + * Returns pointer to the matching context id on success or NULL on + * failure. + */ +void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context) +{ + struct i2o_context_list_element *entry; + unsigned long flags; + void *ptr = NULL; + + spin_lock_irqsave(&c->context_list_lock, flags); + list_for_each_entry(entry, &c->context_list, list) + if (entry->context == context) { + list_del(&entry->list); + ptr = entry->ptr; + kfree(entry); + break; + } + spin_unlock_irqrestore(&c->context_list_lock, flags); + + if (!ptr) + printk(KERN_WARNING "%s: context id %d not found\n", c->name, + context); + + pr_debug("%s: get ptr from context list %d -> %p\n", c->name, context, + ptr); + + return ptr; +}; + +/** + * i2o_cntxt_list_get_ptr - Get a context id from the context list + * @c: controller to which the context list belong + * @ptr: pointer to which the context id should be fetched + * + * Returns context id which matches to the pointer on succes or 0 on + * failure. + */ +u32 i2o_cntxt_list_get_ptr(struct i2o_controller * c, void *ptr) +{ + struct i2o_context_list_element *entry; + u32 context = 0; + unsigned long flags; + + spin_lock_irqsave(&c->context_list_lock, flags); + list_for_each_entry(entry, &c->context_list, list) + if (entry->ptr == ptr) { + context = entry->context; + break; + } + spin_unlock_irqrestore(&c->context_list_lock, flags); + + if (!context) + printk(KERN_WARNING "%s: Could not find nonexistent ptr " + "%p\n", c->name, ptr); + + pr_debug("%s: get context id from context list %p -> %d\n", c->name, + ptr, context); + + return context; +}; +#endif + +/** + * i2o_iop_find - Find an I2O controller by id + * @unit: unit number of the I2O controller to search for + * + * Lookup the I2O controller on the controller list. + * + * Returns pointer to the I2O controller on success or NULL if not found. + */ +struct i2o_controller *i2o_find_iop(int unit) +{ + struct i2o_controller *c; + + list_for_each_entry(c, &i2o_controllers, list) { + if (c->unit == unit) + return c; + } + + return NULL; +}; + +/** + * i2o_iop_find_device - Find a I2O device on an I2O controller + * @c: I2O controller where the I2O device hangs on + * @tid: TID of the I2O device to search for + * + * Searches the devices of the I2O controller for a device with TID tid and + * returns it. + * + * Returns a pointer to the I2O device if found, otherwise NULL. + */ +struct i2o_device *i2o_iop_find_device(struct i2o_controller *c, u16 tid) +{ + struct i2o_device *dev; + + list_for_each_entry(dev, &c->devices, list) + if (dev->lct_data.tid == tid) + return dev; + + return NULL; +}; + +/** + * i2o_quiesce_controller - quiesce controller + * @c: controller + * + * Quiesce an IOP. Causes IOP to make external operation quiescent + * (i2o 'READY' state). Internal operation of the IOP continues normally. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_iop_quiesce(struct i2o_controller *c) +{ + struct i2o_message __iomem *msg; + u32 m; + i2o_status_block *sb = c->status_block.virt; + int rc; + + i2o_status_get(c); + + /* SysQuiesce discarded if IOP not in READY or OPERATIONAL state */ + if ((sb->iop_state != ADAPTER_STATE_READY) && + (sb->iop_state != ADAPTER_STATE_OPERATIONAL)) + return 0; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_SYS_QUIESCE << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + + /* Long timeout needed for quiesce if lots of devices */ + if ((rc = i2o_msg_post_wait(c, m, 240))) + printk(KERN_INFO "%s: Unable to quiesce (status=%#x).\n", + c->name, -rc); + else + pr_debug("%s: Quiesced.\n", c->name); + + i2o_status_get(c); // Entered READY state + + return rc; +}; + +/** + * i2o_iop_enable - move controller from ready to OPERATIONAL + * @c: I2O controller + * + * Enable IOP. This allows the IOP to resume external operations and + * reverses the effect of a quiesce. Returns zero or an error code if + * an error occurs. + */ +static int i2o_iop_enable(struct i2o_controller *c) +{ + struct i2o_message __iomem *msg; + u32 m; + i2o_status_block *sb = c->status_block.virt; + int rc; + + i2o_status_get(c); + + /* Enable only allowed on READY state */ + if (sb->iop_state != ADAPTER_STATE_READY) + return -EINVAL; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_SYS_ENABLE << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + + /* How long of a timeout do we need? */ + if ((rc = i2o_msg_post_wait(c, m, 240))) + printk(KERN_ERR "%s: Could not enable (status=%#x).\n", + c->name, -rc); + else + pr_debug("%s: Enabled.\n", c->name); + + i2o_status_get(c); // entered OPERATIONAL state + + return rc; +}; + +/** + * i2o_iop_quiesce_all - Quiesce all I2O controllers on the system + * + * Quiesce all I2O controllers which are connected to the system. + */ +static inline void i2o_iop_quiesce_all(void) +{ + struct i2o_controller *c, *tmp; + + list_for_each_entry_safe(c, tmp, &i2o_controllers, list) { + if (!c->no_quiesce) + i2o_iop_quiesce(c); + } +}; + +/** + * i2o_iop_enable_all - Enables all controllers on the system + * + * Enables all I2O controllers which are connected to the system. + */ +static inline void i2o_iop_enable_all(void) +{ + struct i2o_controller *c, *tmp; + + list_for_each_entry_safe(c, tmp, &i2o_controllers, list) + i2o_iop_enable(c); +}; + +/** + * i2o_clear_controller - Bring I2O controller into HOLD state + * @c: controller + * + * Clear an IOP to HOLD state, ie. terminate external operations, clear all + * input queues and prepare for a system restart. IOP's internal operation + * continues normally and the outbound queue is alive. The IOP is not + * expected to rebuild its LCT. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_iop_clear(struct i2o_controller *c) +{ + struct i2o_message __iomem *msg; + u32 m; + int rc; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + /* Quiesce all IOPs first */ + i2o_iop_quiesce_all(); + + writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_ADAPTER_CLEAR << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + + if ((rc = i2o_msg_post_wait(c, m, 30))) + printk(KERN_INFO "%s: Unable to clear (status=%#x).\n", + c->name, -rc); + else + pr_debug("%s: Cleared.\n", c->name); + + /* Enable all IOPs */ + i2o_iop_enable_all(); + + i2o_status_get(c); + + return rc; +} + +/** + * i2o_iop_reset - reset an I2O controller + * @c: controller to reset + * + * Reset the IOP into INIT state and wait until IOP gets into RESET state. + * Terminate all external operations, clear IOP's inbound and outbound + * queues, terminate all DDMs, and reload the IOP's operating environment + * and all local DDMs. The IOP rebuilds its LCT. + */ +static int i2o_iop_reset(struct i2o_controller *c) +{ + u8 *status = c->status.virt; + struct i2o_message __iomem *msg; + u32 m; + unsigned long timeout; + i2o_status_block *sb = c->status_block.virt; + int rc = 0; + + pr_debug("%s: Resetting controller\n", c->name); + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + memset(status, 0, 8); + + /* Quiesce all IOPs first */ + i2o_iop_quiesce_all(); + + writel(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_ADAPTER_RESET << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + writel(i2o_exec_driver.context, &msg->u.s.icntxt); + writel(0, &msg->u.s.tcntxt); //FIXME: use reasonable transaction context + writel(0, &msg->body[0]); + writel(0, &msg->body[1]); + writel(i2o_ptr_low((void *)c->status.phys), &msg->body[2]); + writel(i2o_ptr_high((void *)c->status.phys), &msg->body[3]); + + i2o_msg_post(c, m); + + /* Wait for a reply */ + timeout = jiffies + I2O_TIMEOUT_RESET * HZ; + while (!*status) { + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "%s: IOP reset timeout.\n", c->name); + rc = -ETIMEDOUT; + goto exit; + } + + /* Promise bug */ + if (status[1] || status[4]) { + *status = 0; + break; + } + + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(1); + + rmb(); + } + + if (*status == I2O_CMD_IN_PROGRESS) { + /* + * Once the reset is sent, the IOP goes into the INIT state + * which is indeterminate. We need to wait until the IOP + * has rebooted before we can let the system talk to + * it. We read the inbound Free_List until a message is + * available. If we can't read one in the given ammount of + * time, we assume the IOP could not reboot properly. + */ + pr_debug("%s: Reset in progress, waiting for reboot...\n", + c->name); + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_RESET); + while (m == I2O_QUEUE_EMPTY) { + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "%s: IOP reset timeout.\n", + c->name); + rc = -ETIMEDOUT; + goto exit; + } + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(1); + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_RESET); + } + i2o_msg_nop(c, m); + } + + /* from here all quiesce commands are safe */ + c->no_quiesce = 0; + + /* If IopReset was rejected or didn't perform reset, try IopClear */ + i2o_status_get(c); + if (*status == I2O_CMD_REJECTED || sb->iop_state != ADAPTER_STATE_RESET) { + printk(KERN_WARNING "%s: Reset rejected, trying to clear\n", + c->name); + i2o_iop_clear(c); + } else + pr_debug("%s: Reset completed.\n", c->name); + + exit: + /* Enable all IOPs */ + i2o_iop_enable_all(); + + return rc; +}; + +/** + * i2o_iop_init_outbound_queue - setup the outbound message queue + * @c: I2O controller + * + * Clear and (re)initialize IOP's outbound queue and post the message + * frames to the IOP. + * + * Returns 0 on success or a negative errno code on failure. + */ +static int i2o_iop_init_outbound_queue(struct i2o_controller *c) +{ + u8 *status = c->status.virt; + u32 m; + struct i2o_message __iomem *msg; + ulong timeout; + int i; + + pr_debug("%s: Initializing Outbound Queue...\n", c->name); + + memset(status, 0, 4); + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(EIGHT_WORD_MSG_SIZE | TRL_OFFSET_6, &msg->u.head[0]); + writel(I2O_CMD_OUTBOUND_INIT << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + writel(i2o_exec_driver.context, &msg->u.s.icntxt); + writel(0x0106, &msg->u.s.tcntxt); /* FIXME: why 0x0106, maybe in + Spec? */ + writel(PAGE_SIZE, &msg->body[0]); + writel(MSG_FRAME_SIZE << 16 | 0x80, &msg->body[1]); /* Outbound msg frame + size in words and Initcode */ + writel(0xd0000004, &msg->body[2]); + writel(i2o_ptr_low((void *)c->status.phys), &msg->body[3]); + writel(i2o_ptr_high((void *)c->status.phys), &msg->body[4]); + + i2o_msg_post(c, m); + + timeout = jiffies + I2O_TIMEOUT_INIT_OUTBOUND_QUEUE * HZ; + while (*status <= I2O_CMD_IN_PROGRESS) { + if (time_after(jiffies, timeout)) { + printk(KERN_WARNING "%s: Timeout Initializing\n", + c->name); + return -ETIMEDOUT; + } + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(1); + + rmb(); + } + + m = c->out_queue.phys; + + /* Post frames */ + for (i = 0; i < NMBR_MSG_FRAMES; i++) { + i2o_flush_reply(c, m); + udelay(1); /* Promise */ + m += MSG_FRAME_SIZE * 4; + } + + return 0; +} + +/** + * i2o_iop_send_nop - send a core NOP message + * @c: controller + * + * Send a no-operation message with a reply set to cause no + * action either. Needed for bringing up promise controllers. + */ +static int i2o_iop_send_nop(struct i2o_controller *c) +{ + struct i2o_message __iomem *msg; + u32 m = i2o_msg_get_wait(c, &msg, HZ); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + i2o_msg_nop(c, m); + return 0; +} + +/** + * i2o_iop_activate - Bring controller up to HOLD + * @c: controller + * + * This function brings an I2O controller into HOLD state. The adapter + * is reset if necessary and then the queues and resource table are read. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_iop_activate(struct i2o_controller *c) +{ + struct pci_dev *i960 = NULL; + i2o_status_block *sb = c->status_block.virt; + int rc; + + if (c->promise) { + /* Beat up the hardware first of all */ + i960 = + pci_find_slot(c->pdev->bus->number, + PCI_DEVFN(PCI_SLOT(c->pdev->devfn), 0)); + if (i960) + pci_write_config_word(i960, 0x42, 0); + + /* Follow this sequence precisely or the controller + ceases to perform useful functions until reboot */ + if ((rc = i2o_iop_send_nop(c))) + return rc; + + if ((rc = i2o_iop_reset(c))) + return rc; + } + + /* In INIT state, Wait Inbound Q to initialize (in i2o_status_get) */ + /* In READY state, Get status */ + + rc = i2o_status_get(c); + if (rc) { + printk(KERN_INFO "%s: Unable to obtain status, " + "attempting a reset.\n", c->name); + if (i2o_iop_reset(c)) + return rc; + } + + if (sb->i2o_version > I2OVER15) { + printk(KERN_ERR "%s: Not running version 1.5 of the I2O " + "Specification.\n", c->name); + return -ENODEV; + } + + switch (sb->iop_state) { + case ADAPTER_STATE_FAULTED: + printk(KERN_CRIT "%s: hardware fault\n", c->name); + return -ENODEV; + + case ADAPTER_STATE_READY: + case ADAPTER_STATE_OPERATIONAL: + case ADAPTER_STATE_HOLD: + case ADAPTER_STATE_FAILED: + pr_debug("%s: already running, trying to reset...\n", c->name); + if (i2o_iop_reset(c)) + return -ENODEV; + } + + rc = i2o_iop_init_outbound_queue(c); + if (rc) + return rc; + + if (c->promise) { + if ((rc = i2o_iop_send_nop(c))) + return rc; + + if ((rc = i2o_status_get(c))) + return rc; + + if (i960) + pci_write_config_word(i960, 0x42, 0x3FF); + } + + /* In HOLD state */ + + rc = i2o_hrt_get(c); + + return rc; +}; + +/** + * i2o_iop_systab_set - Set the I2O System Table of the specified IOP + * @c: I2O controller to which the system table should be send + * + * Before the systab could be set i2o_systab_build() must be called. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_iop_systab_set(struct i2o_controller *c) +{ + struct i2o_message __iomem *msg; + u32 m; + i2o_status_block *sb = c->status_block.virt; + struct device *dev = &c->pdev->dev; + struct resource *root; + int rc; + + if (sb->current_mem_size < sb->desired_mem_size) { + struct resource *res = &c->mem_resource; + res->name = c->pdev->bus->name; + res->flags = IORESOURCE_MEM; + res->start = 0; + res->end = 0; + printk(KERN_INFO "%s: requires private memory resources.\n", + c->name); + root = pci_find_parent_resource(c->pdev, res); + if (root == NULL) + printk(KERN_WARNING "%s: Can't find parent resource!\n", + c->name); + if (root && allocate_resource(root, res, sb->desired_mem_size, sb->desired_mem_size, sb->desired_mem_size, 1 << 20, /* Unspecified, so use 1Mb and play safe */ + NULL, NULL) >= 0) { + c->mem_alloc = 1; + sb->current_mem_size = 1 + res->end - res->start; + sb->current_mem_base = res->start; + printk(KERN_INFO "%s: allocated %ld bytes of PCI memory" + " at 0x%08lX.\n", c->name, + 1 + res->end - res->start, res->start); + } + } + + if (sb->current_io_size < sb->desired_io_size) { + struct resource *res = &c->io_resource; + res->name = c->pdev->bus->name; + res->flags = IORESOURCE_IO; + res->start = 0; + res->end = 0; + printk(KERN_INFO "%s: requires private memory resources.\n", + c->name); + root = pci_find_parent_resource(c->pdev, res); + if (root == NULL) + printk(KERN_WARNING "%s: Can't find parent resource!\n", + c->name); + if (root && allocate_resource(root, res, sb->desired_io_size, sb->desired_io_size, sb->desired_io_size, 1 << 20, /* Unspecified, so use 1Mb and play safe */ + NULL, NULL) >= 0) { + c->io_alloc = 1; + sb->current_io_size = 1 + res->end - res->start; + sb->current_mem_base = res->start; + printk(KERN_INFO "%s: allocated %ld bytes of PCI I/O at" + " 0x%08lX.\n", c->name, + 1 + res->end - res->start, res->start); + } + } + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + i2o_systab.phys = dma_map_single(dev, i2o_systab.virt, i2o_systab.len, + PCI_DMA_TODEVICE); + if (!i2o_systab.phys) { + i2o_msg_nop(c, m); + return -ENOMEM; + } + + writel(I2O_MESSAGE_SIZE(12) | SGL_OFFSET_6, &msg->u.head[0]); + writel(I2O_CMD_SYS_TAB_SET << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + + /* + * Provide three SGL-elements: + * System table (SysTab), Private memory space declaration and + * Private i/o space declaration + * + * FIXME: is this still true? + * Nasty one here. We can't use dma_alloc_coherent to send the + * same table to everyone. We have to go remap it for them all + */ + + writel(c->unit + 2, &msg->body[0]); + writel(0, &msg->body[1]); + writel(0x54000000 | i2o_systab.len, &msg->body[2]); + writel(i2o_systab.phys, &msg->body[3]); + writel(0x54000000 | sb->current_mem_size, &msg->body[4]); + writel(sb->current_mem_base, &msg->body[5]); + writel(0xd4000000 | sb->current_io_size, &msg->body[6]); + writel(sb->current_io_base, &msg->body[6]); + + rc = i2o_msg_post_wait(c, m, 120); + + dma_unmap_single(dev, i2o_systab.phys, i2o_systab.len, + PCI_DMA_TODEVICE); + + if (rc < 0) + printk(KERN_ERR "%s: Unable to set SysTab (status=%#x).\n", + c->name, -rc); + else + pr_debug("%s: SysTab set.\n", c->name); + + i2o_status_get(c); // Entered READY state + + return rc; +} + +/** + * i2o_iop_online - Bring a controller online into OPERATIONAL state. + * @c: I2O controller + * + * Send the system table and enable the I2O controller. + * + * Returns 0 on success or negativer error code on failure. + */ +static int i2o_iop_online(struct i2o_controller *c) +{ + int rc; + + rc = i2o_iop_systab_set(c); + if (rc) + return rc; + + /* In READY state */ + pr_debug("%s: Attempting to enable...\n", c->name); + rc = i2o_iop_enable(c); + if (rc) + return rc; + + return 0; +}; + +/** + * i2o_iop_remove - Remove the I2O controller from the I2O core + * @c: I2O controller + * + * Remove the I2O controller from the I2O core. If devices are attached to + * the controller remove these also and finally reset the controller. + */ +void i2o_iop_remove(struct i2o_controller *c) +{ + struct i2o_device *dev, *tmp; + + pr_debug("%s: deleting controller\n", c->name); + + i2o_driver_notify_controller_remove_all(c); + + list_del(&c->list); + + list_for_each_entry_safe(dev, tmp, &c->devices, list) + i2o_device_remove(dev); + + /* Ask the IOP to switch to RESET state */ + i2o_iop_reset(c); +} + +/** + * i2o_systab_build - Build system table + * + * The system table contains information about all the IOPs in the system + * (duh) and is used by the Executives on the IOPs to establish peer2peer + * connections. We're not supporting peer2peer at the moment, but this + * will be needed down the road for things like lan2lan forwarding. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_systab_build(void) +{ + struct i2o_controller *c, *tmp; + int num_controllers = 0; + u32 change_ind = 0; + int count = 0; + struct i2o_sys_tbl *systab = i2o_systab.virt; + + list_for_each_entry_safe(c, tmp, &i2o_controllers, list) + num_controllers++; + + if (systab) { + change_ind = systab->change_ind; + kfree(i2o_systab.virt); + } + + /* Header + IOPs */ + i2o_systab.len = sizeof(struct i2o_sys_tbl) + num_controllers * + sizeof(struct i2o_sys_tbl_entry); + + systab = i2o_systab.virt = kmalloc(i2o_systab.len, GFP_KERNEL); + if (!systab) { + printk(KERN_ERR "i2o: unable to allocate memory for System " + "Table\n"); + return -ENOMEM; + } + memset(systab, 0, i2o_systab.len); + + systab->version = I2OVERSION; + systab->change_ind = change_ind + 1; + + list_for_each_entry_safe(c, tmp, &i2o_controllers, list) { + i2o_status_block *sb; + + if (count >= num_controllers) { + printk(KERN_ERR "i2o: controller added while building " + "system table\n"); + break; + } + + sb = c->status_block.virt; + + /* + * Get updated IOP state so we have the latest information + * + * We should delete the controller at this point if it + * doesn't respond since if it's not on the system table + * it is techninically not part of the I2O subsystem... + */ + if (unlikely(i2o_status_get(c))) { + printk(KERN_ERR "%s: Deleting b/c could not get status" + " while attempting to build system table\n", + c->name); + i2o_iop_remove(c); + continue; // try the next one + } + + systab->iops[count].org_id = sb->org_id; + systab->iops[count].iop_id = c->unit + 2; + systab->iops[count].seg_num = 0; + systab->iops[count].i2o_version = sb->i2o_version; + systab->iops[count].iop_state = sb->iop_state; + systab->iops[count].msg_type = sb->msg_type; + systab->iops[count].frame_size = sb->inbound_frame_size; + systab->iops[count].last_changed = change_ind; + systab->iops[count].iop_capabilities = sb->iop_capabilities; + systab->iops[count].inbound_low = i2o_ptr_low(c->post_port); + systab->iops[count].inbound_high = i2o_ptr_high(c->post_port); + + count++; + } + + systab->num_entries = count; + + return 0; +}; + +/** + * i2o_parse_hrt - Parse the hardware resource table. + * @c: I2O controller + * + * We don't do anything with it except dumping it (in debug mode). + * + * Returns 0. + */ +static int i2o_parse_hrt(struct i2o_controller *c) +{ + i2o_dump_hrt(c); + return 0; +}; + +/** + * i2o_status_get - Get the status block from the I2O controller + * @c: I2O controller + * + * Issue a status query on the controller. This updates the attached + * status block. The status block could then be accessed through + * c->status_block. + * + * Returns 0 on sucess or negative error code on failure. + */ +int i2o_status_get(struct i2o_controller *c) +{ + struct i2o_message __iomem *msg; + u32 m; + u8 *status_block; + unsigned long timeout; + + status_block = (u8 *) c->status_block.virt; + memset(status_block, 0, sizeof(i2o_status_block)); + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_STATUS_GET << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + writel(i2o_exec_driver.context, &msg->u.s.icntxt); + writel(0, &msg->u.s.tcntxt); // FIXME: use resonable transaction context + writel(0, &msg->body[0]); + writel(0, &msg->body[1]); + writel(i2o_ptr_low((void *)c->status_block.phys), &msg->body[2]); + writel(i2o_ptr_high((void *)c->status_block.phys), &msg->body[3]); + writel(sizeof(i2o_status_block), &msg->body[4]); /* always 88 bytes */ + + i2o_msg_post(c, m); + + /* Wait for a reply */ + timeout = jiffies + I2O_TIMEOUT_STATUS_GET * HZ; + while (status_block[87] != 0xFF) { + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "%s: Get status timeout.\n", c->name); + return -ETIMEDOUT; + } + + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(1); + + rmb(); + } + +#ifdef DEBUG + i2o_debug_state(c); +#endif + + return 0; +} + +/* + * i2o_hrt_get - Get the Hardware Resource Table from the I2O controller + * @c: I2O controller from which the HRT should be fetched + * + * The HRT contains information about possible hidden devices but is + * mostly useless to us. + * + * Returns 0 on success or negativer error code on failure. + */ +static int i2o_hrt_get(struct i2o_controller *c) +{ + int rc; + int i; + i2o_hrt *hrt = c->hrt.virt; + u32 size = sizeof(i2o_hrt); + struct device *dev = &c->pdev->dev; + + for (i = 0; i < I2O_HRT_GET_TRIES; i++) { + struct i2o_message __iomem *msg; + u32 m; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(SIX_WORD_MSG_SIZE | SGL_OFFSET_4, &msg->u.head[0]); + writel(I2O_CMD_HRT_GET << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + writel(0xd0000000 | c->hrt.len, &msg->body[0]); + writel(c->hrt.phys, &msg->body[1]); + + rc = i2o_msg_post_wait_mem(c, m, 20, &c->hrt); + + if (rc < 0) { + printk(KERN_ERR "%s: Unable to get HRT (status=%#x)\n", + c->name, -rc); + return rc; + } + + size = hrt->num_entries * hrt->entry_len << 2; + if (size > c->hrt.len) { + if (i2o_dma_realloc(dev, &c->hrt, size, GFP_KERNEL)) + return -ENOMEM; + else + hrt = c->hrt.virt; + } else + return i2o_parse_hrt(c); + } + + printk(KERN_ERR "%s: Unable to get HRT after %d tries, giving up\n", + c->name, I2O_HRT_GET_TRIES); + + return -EBUSY; +} + +/** + * i2o_iop_alloc - Allocate and initialize a i2o_controller struct + * + * Allocate the necessary memory for a i2o_controller struct and + * initialize the lists. + * + * Returns a pointer to the I2O controller or a negative error code on + * failure. + */ +struct i2o_controller *i2o_iop_alloc(void) +{ + static int unit = 0; /* 0 and 1 are NULL IOP and Local Host */ + struct i2o_controller *c; + + c = kmalloc(sizeof(*c), GFP_KERNEL); + if (!c) { + printk(KERN_ERR "i2o: Insufficient memory to allocate a I2O " + "controller.\n"); + return ERR_PTR(-ENOMEM); + } + memset(c, 0, sizeof(*c)); + + INIT_LIST_HEAD(&c->devices); + spin_lock_init(&c->lock); + init_MUTEX(&c->lct_lock); + c->unit = unit++; + sprintf(c->name, "iop%d", c->unit); + +#if BITS_PER_LONG == 64 + spin_lock_init(&c->context_list_lock); + atomic_set(&c->context_list_counter, 0); + INIT_LIST_HEAD(&c->context_list); +#endif + + return c; +}; + +/** + * i2o_iop_free - Free the i2o_controller struct + * @c: I2O controller to free + */ +void i2o_iop_free(struct i2o_controller *c) +{ + kfree(c); +}; + +/** + * i2o_iop_add - Initialize the I2O controller and add him to the I2O core + * @c: controller + * + * Initialize the I2O controller and if no error occurs add him to the I2O + * core. + * + * Returns 0 on success or negative error code on failure. + */ +int i2o_iop_add(struct i2o_controller *c) +{ + int rc; + + printk(KERN_INFO "%s: Activating I2O controller...\n", c->name); + printk(KERN_INFO "%s: This may take a few minutes if there are many " + "devices\n", c->name); + + if ((rc = i2o_iop_activate(c))) { + printk(KERN_ERR "%s: could not activate controller\n", + c->name); + i2o_iop_reset(c); + return rc; + } + + pr_debug("%s: building sys table...\n", c->name); + + if ((rc = i2o_systab_build())) { + i2o_iop_reset(c); + return rc; + } + + pr_debug("%s: online controller...\n", c->name); + + if ((rc = i2o_iop_online(c))) { + i2o_iop_reset(c); + return rc; + } + + pr_debug("%s: getting LCT...\n", c->name); + + if ((rc = i2o_exec_lct_get(c))) { + i2o_iop_reset(c); + return rc; + } + + list_add(&c->list, &i2o_controllers); + + i2o_driver_notify_controller_add_all(c); + + printk(KERN_INFO "%s: Controller added\n", c->name); + + return 0; +}; + +/** + * i2o_event_register - Turn on/off event notification for a I2O device + * @dev: I2O device which should receive the event registration request + * @drv: driver which want to get notified + * @tcntxt: transaction context to use with this notifier + * @evt_mask: mask of events + * + * Create and posts an event registration message to the task. No reply + * is waited for, or expected. If you do not want further notifications, + * call the i2o_event_register again with a evt_mask of 0. + * + * Returns 0 on success or -ETIMEDOUT if no message could be fetched for + * sending the request. + */ +int i2o_event_register(struct i2o_device *dev, struct i2o_driver *drv, + int tcntxt, u32 evt_mask) +{ + struct i2o_controller *c = dev->iop; + struct i2o_message __iomem *msg; + u32 m; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_UTIL_EVT_REGISTER << 24 | HOST_TID << 12 | dev->lct_data. + tid, &msg->u.head[1]); + writel(drv->context, &msg->u.s.icntxt); + writel(tcntxt, &msg->u.s.tcntxt); + writel(evt_mask, &msg->body[0]); + + i2o_msg_post(c, m); + + return 0; +}; + +/** + * i2o_iop_init - I2O main initialization function + * + * Initialize the I2O drivers (OSM) functions, register the Executive OSM, + * initialize the I2O PCI part and finally initialize I2O device stuff. + * + * Returns 0 on success or negative error code on failure. + */ +static int __init i2o_iop_init(void) +{ + int rc = 0; + + printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); + + rc = i2o_device_init(); + if (rc) + goto exit; + + rc = i2o_driver_init(); + if (rc) + goto device_exit; + + rc = i2o_exec_init(); + if (rc) + goto driver_exit; + + rc = i2o_pci_init(); + if (rc < 0) + goto exec_exit; + + return 0; + + exec_exit: + i2o_exec_exit(); + + driver_exit: + i2o_driver_exit(); + + device_exit: + i2o_device_exit(); + + exit: + return rc; +} + +/** + * i2o_iop_exit - I2O main exit function + * + * Removes I2O controllers from PCI subsystem and shut down OSMs. + */ +static void __exit i2o_iop_exit(void) +{ + i2o_pci_exit(); + i2o_exec_exit(); + i2o_driver_exit(); + i2o_device_exit(); +}; + +module_init(i2o_iop_init); +module_exit(i2o_iop_exit); + +MODULE_AUTHOR("Red Hat Software"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(OSM_DESCRIPTION); +MODULE_VERSION(OSM_VERSION); + +#if BITS_PER_LONG == 64 +EXPORT_SYMBOL(i2o_cntxt_list_add); +EXPORT_SYMBOL(i2o_cntxt_list_get); +EXPORT_SYMBOL(i2o_cntxt_list_remove); +EXPORT_SYMBOL(i2o_cntxt_list_get_ptr); +#endif +EXPORT_SYMBOL(i2o_msg_get_wait); +EXPORT_SYMBOL(i2o_msg_nop); +EXPORT_SYMBOL(i2o_find_iop); +EXPORT_SYMBOL(i2o_iop_find_device); +EXPORT_SYMBOL(i2o_event_register); +EXPORT_SYMBOL(i2o_status_get); +EXPORT_SYMBOL(i2o_controllers); diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c new file mode 100644 index 000000000000..e772752f056d --- /dev/null +++ b/drivers/message/i2o/pci.c @@ -0,0 +1,528 @@ +/* + * PCI handling of I2O controller + * + * Copyright (C) 1999-2002 Red Hat Software + * + * Written by Alan Cox, Building Number Three Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * A lot of the I2O message side code from this is taken from the Red + * Creek RCPCI45 adapter driver by Red Creek Communications + * + * Fixes/additions: + * Philipp Rumpf + * Juha Sievänen <Juha.Sievanen@cs.Helsinki.FI> + * Auvo Häkkinen <Auvo.Hakkinen@cs.Helsinki.FI> + * Deepak Saxena <deepak@plexity.net> + * Boji T Kannanthanam <boji.t.kannanthanam@intel.com> + * Alan Cox <alan@redhat.com>: + * Ported to Linux 2.5. + * Markus Lidel <Markus.Lidel@shadowconnect.com>: + * Minor fixes for 2.6. + * Markus Lidel <Markus.Lidel@shadowconnect.com>: + * Support for sysfs included. + */ + +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/i2o.h> + +#ifdef CONFIG_MTRR +#include <asm/mtrr.h> +#endif // CONFIG_MTRR + +/* Module internal functions from other sources */ +extern struct i2o_controller *i2o_iop_alloc(void); +extern void i2o_iop_free(struct i2o_controller *); + +extern int i2o_iop_add(struct i2o_controller *); +extern void i2o_iop_remove(struct i2o_controller *); + +extern int i2o_driver_dispatch(struct i2o_controller *, u32, + struct i2o_message *); + +/* PCI device id table for all I2O controllers */ +static struct pci_device_id __devinitdata i2o_pci_ids[] = { + {PCI_DEVICE_CLASS(PCI_CLASS_INTELLIGENT_I2O << 8, 0xffff00)}, + {PCI_DEVICE(PCI_VENDOR_ID_DPT, 0xa511)}, + {0} +}; + +/** + * i2o_dma_realloc - Realloc DMA memory + * @dev: struct device pointer to the PCI device of the I2O controller + * @addr: pointer to a i2o_dma struct DMA buffer + * @len: new length of memory + * @gfp_mask: GFP mask + * + * If there was something allocated in the addr, free it first. If len > 0 + * than try to allocate it and write the addresses back to the addr + * structure. If len == 0 set the virtual address to NULL. + * + * Returns the 0 on success or negative error code on failure. + */ +int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, size_t len, + unsigned int gfp_mask) +{ + i2o_dma_free(dev, addr); + + if (len) + return i2o_dma_alloc(dev, addr, len, gfp_mask); + + return 0; +}; + +/** + * i2o_pci_free - Frees the DMA memory for the I2O controller + * @c: I2O controller to free + * + * Remove all allocated DMA memory and unmap memory IO regions. If MTRR + * is enabled, also remove it again. + */ +static void i2o_pci_free(struct i2o_controller *c) +{ + struct device *dev; + + dev = &c->pdev->dev; + + i2o_dma_free(dev, &c->out_queue); + i2o_dma_free(dev, &c->status_block); + if (c->lct) + kfree(c->lct); + i2o_dma_free(dev, &c->dlct); + i2o_dma_free(dev, &c->hrt); + i2o_dma_free(dev, &c->status); + +#ifdef CONFIG_MTRR + if (c->mtrr_reg0 >= 0) + mtrr_del(c->mtrr_reg0, 0, 0); + if (c->mtrr_reg1 >= 0) + mtrr_del(c->mtrr_reg1, 0, 0); +#endif + + if (c->raptor && c->in_queue.virt) + iounmap(c->in_queue.virt); + + if (c->base.virt) + iounmap(c->base.virt); +} + +/** + * i2o_pci_alloc - Allocate DMA memory, map IO memory for I2O controller + * @c: I2O controller + * + * Allocate DMA memory for a PCI (or in theory AGP) I2O controller. All + * IO mappings are also done here. If MTRR is enabled, also do add memory + * regions here. + * + * Returns 0 on success or negative error code on failure. + */ +static int __devinit i2o_pci_alloc(struct i2o_controller *c) +{ + struct pci_dev *pdev = c->pdev; + struct device *dev = &pdev->dev; + int i; + + for (i = 0; i < 6; i++) { + /* Skip I/O spaces */ + if (!(pci_resource_flags(pdev, i) & IORESOURCE_IO)) { + if (!c->base.phys) { + c->base.phys = pci_resource_start(pdev, i); + c->base.len = pci_resource_len(pdev, i); + + /* + * If we know what card it is, set the size + * correctly. Code is taken from dpt_i2o.c + */ + if (pdev->device == 0xa501) { + if (pdev->subsystem_device >= 0xc032 && + pdev->subsystem_device <= 0xc03b) { + if (c->base.len > 0x400000) + c->base.len = 0x400000; + } else { + if (c->base.len > 0x100000) + c->base.len = 0x100000; + } + } + if (!c->raptor) + break; + } else { + c->in_queue.phys = pci_resource_start(pdev, i); + c->in_queue.len = pci_resource_len(pdev, i); + break; + } + } + } + + if (i == 6) { + printk(KERN_ERR "%s: I2O controller has no memory regions" + " defined.\n", c->name); + i2o_pci_free(c); + return -EINVAL; + } + + /* Map the I2O controller */ + if (c->raptor) { + printk(KERN_INFO "%s: PCI I2O controller\n", c->name); + printk(KERN_INFO " BAR0 at 0x%08lX size=%ld\n", + (unsigned long)c->base.phys, (unsigned long)c->base.len); + printk(KERN_INFO " BAR1 at 0x%08lX size=%ld\n", + (unsigned long)c->in_queue.phys, + (unsigned long)c->in_queue.len); + } else + printk(KERN_INFO "%s: PCI I2O controller at %08lX size=%ld\n", + c->name, (unsigned long)c->base.phys, + (unsigned long)c->base.len); + + c->base.virt = ioremap(c->base.phys, c->base.len); + if (!c->base.virt) { + printk(KERN_ERR "%s: Unable to map controller.\n", c->name); + return -ENOMEM; + } + + if (c->raptor) { + c->in_queue.virt = ioremap(c->in_queue.phys, c->in_queue.len); + if (!c->in_queue.virt) { + printk(KERN_ERR "%s: Unable to map controller.\n", + c->name); + i2o_pci_free(c); + return -ENOMEM; + } + } else + c->in_queue = c->base; + + c->irq_mask = c->base.virt + 0x34; + c->post_port = c->base.virt + 0x40; + c->reply_port = c->base.virt + 0x44; + +#ifdef CONFIG_MTRR + /* Enable Write Combining MTRR for IOP's memory region */ + c->mtrr_reg0 = mtrr_add(c->in_queue.phys, c->in_queue.len, + MTRR_TYPE_WRCOMB, 1); + c->mtrr_reg1 = -1; + + if (c->mtrr_reg0 < 0) + printk(KERN_WARNING "%s: could not enable write combining " + "MTRR\n", c->name); + else + printk(KERN_INFO "%s: using write combining MTRR\n", c->name); + + /* + * If it is an INTEL i960 I/O processor then set the first 64K to + * Uncacheable since the region contains the messaging unit which + * shouldn't be cached. + */ + if ((pdev->vendor == PCI_VENDOR_ID_INTEL || + pdev->vendor == PCI_VENDOR_ID_DPT) && !c->raptor) { + printk(KERN_INFO "%s: MTRR workaround for Intel i960 processor" + "\n", c->name); + c->mtrr_reg1 = mtrr_add(c->base.phys, 0x10000, + MTRR_TYPE_UNCACHABLE, 1); + + if (c->mtrr_reg1 < 0) { + printk(KERN_WARNING "%s: Error in setting " + "MTRR_TYPE_UNCACHABLE\n", c->name); + mtrr_del(c->mtrr_reg0, c->in_queue.phys, + c->in_queue.len); + c->mtrr_reg0 = -1; + } + } +#endif + + if (i2o_dma_alloc(dev, &c->status, 8, GFP_KERNEL)) { + i2o_pci_free(c); + return -ENOMEM; + } + + if (i2o_dma_alloc(dev, &c->hrt, sizeof(i2o_hrt), GFP_KERNEL)) { + i2o_pci_free(c); + return -ENOMEM; + } + + if (i2o_dma_alloc(dev, &c->dlct, 8192, GFP_KERNEL)) { + i2o_pci_free(c); + return -ENOMEM; + } + + if (i2o_dma_alloc(dev, &c->status_block, sizeof(i2o_status_block), + GFP_KERNEL)) { + i2o_pci_free(c); + return -ENOMEM; + } + + if (i2o_dma_alloc(dev, &c->out_queue, MSG_POOL_SIZE, GFP_KERNEL)) { + i2o_pci_free(c); + return -ENOMEM; + } + + pci_set_drvdata(pdev, c); + + return 0; +} + +/** + * i2o_pci_interrupt - Interrupt handler for I2O controller + * @irq: interrupt line + * @dev_id: pointer to the I2O controller + * @r: pointer to registers + * + * Handle an interrupt from a PCI based I2O controller. This turns out + * to be rather simple. We keep the controller pointer in the cookie. + */ +static irqreturn_t i2o_pci_interrupt(int irq, void *dev_id, struct pt_regs *r) +{ + struct i2o_controller *c = dev_id; + struct device *dev = &c->pdev->dev; + struct i2o_message *m; + u32 mv; + + /* + * Old 960 steppings had a bug in the I2O unit that caused + * the queue to appear empty when it wasn't. + */ + mv = I2O_REPLY_READ32(c); + if (mv == I2O_QUEUE_EMPTY) { + mv = I2O_REPLY_READ32(c); + if (unlikely(mv == I2O_QUEUE_EMPTY)) { + return IRQ_NONE; + } else + pr_debug("%s: 960 bug detected\n", c->name); + } + + while (mv != I2O_QUEUE_EMPTY) { + /* + * Map the message from the page frame map to kernel virtual. + * Because bus_to_virt is deprecated, we have calculate the + * location by ourself! + */ + m = i2o_msg_out_to_virt(c, mv); + + /* + * Ensure this message is seen coherently but cachably by + * the processor + */ + dma_sync_single_for_cpu(dev, mv, MSG_FRAME_SIZE * 4, + PCI_DMA_FROMDEVICE); + + /* dispatch it */ + if (i2o_driver_dispatch(c, mv, m)) + /* flush it if result != 0 */ + i2o_flush_reply(c, mv); + + /* + * That 960 bug again... + */ + mv = I2O_REPLY_READ32(c); + if (mv == I2O_QUEUE_EMPTY) + mv = I2O_REPLY_READ32(c); + } + return IRQ_HANDLED; +} + +/** + * i2o_pci_irq_enable - Allocate interrupt for I2O controller + * + * Allocate an interrupt for the I2O controller, and activate interrupts + * on the I2O controller. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_pci_irq_enable(struct i2o_controller *c) +{ + struct pci_dev *pdev = c->pdev; + int rc; + + I2O_IRQ_WRITE32(c, 0xffffffff); + + if (pdev->irq) { + rc = request_irq(pdev->irq, i2o_pci_interrupt, SA_SHIRQ, + c->name, c); + if (rc < 0) { + printk(KERN_ERR "%s: unable to allocate interrupt %d." + "\n", c->name, pdev->irq); + return rc; + } + } + + I2O_IRQ_WRITE32(c, 0x00000000); + + printk(KERN_INFO "%s: Installed at IRQ %d\n", c->name, pdev->irq); + + return 0; +} + +/** + * i2o_pci_irq_disable - Free interrupt for I2O controller + * @c: I2O controller + * + * Disable interrupts in I2O controller and then free interrupt. + */ +static void i2o_pci_irq_disable(struct i2o_controller *c) +{ + I2O_IRQ_WRITE32(c, 0xffffffff); + + if (c->pdev->irq > 0) + free_irq(c->pdev->irq, c); +} + +/** + * i2o_pci_probe - Probe the PCI device for an I2O controller + * @dev: PCI device to test + * @id: id which matched with the PCI device id table + * + * Probe the PCI device for any device which is a memory of the + * Intelligent, I2O class or an Adaptec Zero Channel Controller. We + * attempt to set up each such device and register it with the core. + * + * Returns 0 on success or negative error code on failure. + */ +static int __devinit i2o_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct i2o_controller *c; + int rc; + + printk(KERN_INFO "i2o: Checking for PCI I2O controllers...\n"); + + if ((pdev->class & 0xff) > 1) { + printk(KERN_WARNING "i2o: I2O controller found but does not " + "support I2O 1.5 (skipping).\n"); + return -ENODEV; + } + + if ((rc = pci_enable_device(pdev))) { + printk(KERN_WARNING "i2o: I2O controller found but could not be" + " enabled.\n"); + return rc; + } + + printk(KERN_INFO "i2o: I2O controller found on bus %d at %d.\n", + pdev->bus->number, pdev->devfn); + + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { + printk(KERN_WARNING "i2o: I2O controller on bus %d at %d: No " + "suitable DMA available!\n", pdev->bus->number, + pdev->devfn); + rc = -ENODEV; + goto disable; + } + + pci_set_master(pdev); + + c = i2o_iop_alloc(); + if (IS_ERR(c)) { + printk(KERN_ERR "i2o: memory for I2O controller could not be " + "allocated\n"); + rc = PTR_ERR(c); + goto disable; + } + + c->pdev = pdev; + c->device = pdev->dev; + + /* Cards that fall apart if you hit them with large I/O loads... */ + if (pdev->vendor == PCI_VENDOR_ID_NCR && pdev->device == 0x0630) { + c->short_req = 1; + printk(KERN_INFO "%s: Symbios FC920 workarounds activated.\n", + c->name); + } + + if (pdev->subsystem_vendor == PCI_VENDOR_ID_PROMISE) { + c->promise = 1; + printk(KERN_INFO "%s: Promise workarounds activated.\n", + c->name); + } + + /* Cards that go bananas if you quiesce them before you reset them. */ + if (pdev->vendor == PCI_VENDOR_ID_DPT) { + c->no_quiesce = 1; + if (pdev->device == 0xa511) + c->raptor = 1; + } + + if ((rc = i2o_pci_alloc(c))) { + printk(KERN_ERR "%s: DMA / IO allocation for I2O controller " + " failed\n", c->name); + goto free_controller; + } + + if (i2o_pci_irq_enable(c)) { + printk(KERN_ERR "%s: unable to enable interrupts for I2O " + "controller\n", c->name); + goto free_pci; + } + + if ((rc = i2o_iop_add(c))) + goto uninstall; + + return 0; + + uninstall: + i2o_pci_irq_disable(c); + + free_pci: + i2o_pci_free(c); + + free_controller: + i2o_iop_free(c); + + disable: + pci_disable_device(pdev); + + return rc; +} + +/** + * i2o_pci_remove - Removes a I2O controller from the system + * pdev: I2O controller which should be removed + * + * Reset the I2O controller, disable interrupts and remove all allocated + * resources. + */ +static void __devexit i2o_pci_remove(struct pci_dev *pdev) +{ + struct i2o_controller *c; + c = pci_get_drvdata(pdev); + + i2o_iop_remove(c); + i2o_pci_irq_disable(c); + i2o_pci_free(c); + + printk(KERN_INFO "%s: Controller removed.\n", c->name); + + i2o_iop_free(c); + pci_disable_device(pdev); +}; + +/* PCI driver for I2O controller */ +static struct pci_driver i2o_pci_driver = { + .name = "I2O controller", + .id_table = i2o_pci_ids, + .probe = i2o_pci_probe, + .remove = __devexit_p(i2o_pci_remove), +}; + +/** + * i2o_pci_init - registers I2O PCI driver in PCI subsystem + * + * Returns > 0 on success or negative error code on failure. + */ +int __init i2o_pci_init(void) +{ + return pci_register_driver(&i2o_pci_driver); +}; + +/** + * i2o_pci_exit - unregisters I2O PCI driver from PCI subsystem + */ +void __exit i2o_pci_exit(void) +{ + pci_unregister_driver(&i2o_pci_driver); +}; + +EXPORT_SYMBOL(i2o_dma_realloc); +MODULE_DEVICE_TABLE(pci, i2o_pci_ids); |