diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 86 |
1 files changed, 71 insertions, 15 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 49ef8b0794ae..92144ed1ad46 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -106,6 +106,19 @@ config UCB1400_CORE To compile this driver as a module, choose M here: the module will be called ucb1400_core. +config MFD_LM3533 + tristate "LM3533 Lighting Power chip" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + Say yes here to enable support for National Semiconductor / TI + LM3533 Lighting Power chips. + + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the LED, + backlight or ambient-light-sensor functionality of the device. + config TPS6105X tristate "TPS61050/61052 Boost Converters" depends on I2C @@ -177,8 +190,8 @@ config MFD_TPS65910 bool "TPS65910 Power Management chip" depends on I2C=y && GPIOLIB select MFD_CORE - select GPIO_TPS65910 select REGMAP_I2C + select IRQ_DOMAIN help if you say yes here you get support for the TPS65910 series of Power Management chips. @@ -273,6 +286,7 @@ config TWL6040_CORE depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE select REGMAP_I2C + select IRQ_DOMAIN default n help Say yes here if you want support for Texas Instruments TWL6040 audio @@ -377,7 +391,6 @@ config PMIC_DA9052 config MFD_DA9052_SPI bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI" - select IRQ_DOMAIN select REGMAP_SPI select REGMAP_IRQ select PMIC_DA9052 @@ -390,7 +403,6 @@ config MFD_DA9052_SPI config MFD_DA9052_I2C bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C" - select IRQ_DOMAIN select REGMAP_I2C select REGMAP_IRQ select PMIC_DA9052 @@ -411,13 +423,26 @@ config PMIC_ADP5520 individual components like LCD backlight, LEDs, GPIOs and Kepad under the corresponding menus. +config MFD_MAX77693 + bool "Maxim Semiconductor MAX77693 PMIC Support" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + select REGMAP_I2C + help + Say yes here to support for Maxim Semiconductor MAX77693. + This is a companion Power Management IC with Flash, Haptic, Charger, + and MUIC(Micro USB Interface Controller) controls on chip. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + config MFD_MAX8925 bool "Maxim Semiconductor MAX8925 PMIC Support" depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE help Say yes here to support for Maxim Semiconductor MAX8925. This is - a Power Management IC. This driver provies common support for + a Power Management IC. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. @@ -440,7 +465,7 @@ config MFD_MAX8998 help Say yes here to support for Maxim Semiconductor MAX8998 and National Semiconductor LP3974. This is a Power Management IC. - This driver provies common support for accessing the device, + This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. @@ -451,14 +476,14 @@ config MFD_S5M_CORE select REGMAP_I2C help Support for the Samsung Electronics S5M MFD series. - This driver provies common support for accessing the device, + This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device config MFD_WM8400 - tristate "Support Wolfson Microelectronics WM8400" + bool "Support Wolfson Microelectronics WM8400" select MFD_CORE - depends on I2C + depends on I2C=y select REGMAP_I2C help Support for the Wolfson Microelecronics WM8400 PMIC and audio @@ -475,6 +500,7 @@ config MFD_WM831X_I2C select MFD_CORE select MFD_WM831X select REGMAP_I2C + select IRQ_DOMAIN depends on I2C=y && GENERIC_HARDIRQS help Support for the Wolfson Microelecronics WM831x and WM832x PMICs @@ -487,6 +513,7 @@ config MFD_WM831X_SPI select MFD_CORE select MFD_WM831X select REGMAP_SPI + select IRQ_DOMAIN depends on SPI_MASTER && GENERIC_HARDIRQS help Support for the Wolfson Microelecronics WM831x and WM832x PMICs @@ -561,7 +588,6 @@ config MFD_WM8994 bool "Support Wolfson Microelectronics WM8994" select MFD_CORE select REGMAP_I2C - select IRQ_DOMAIN select REGMAP_IRQ depends on I2C=y && GENERIC_HARDIRQS help @@ -600,17 +626,32 @@ config MFD_MC13783 tristate config MFD_MC13XXX - tristate "Support Freescale MC13783 and MC13892" - depends on SPI_MASTER + tristate + depends on SPI_MASTER || I2C select MFD_CORE select MFD_MC13783 help - Support for the Freescale (Atlas) PMIC and audio CODECs - MC13783 and MC13892. - This driver provides common support for accessing the device, + Enable support for the Freescale MC13783 and MC13892 PMICs. + This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. +config MFD_MC13XXX_SPI + tristate "Freescale MC13783 and MC13892 SPI interface" + depends on SPI_MASTER + select REGMAP_SPI + select MFD_MC13XXX + help + Select this if your MC13xxx is connected via an SPI bus. + +config MFD_MC13XXX_I2C + tristate "Freescale MC13892 I2C interface" + depends on I2C + select REGMAP_I2C + select MFD_MC13XXX + help + Select this if your MC13xxx is connected via an I2C bus. + config ABX500_CORE bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" default y if ARCH_U300 || ARCH_U8500 @@ -654,7 +695,7 @@ config EZX_PCAP config AB8500_CORE bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" - depends on GENERIC_HARDIRQS && ABX500_CORE + depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU select MFD_CORE help Select this option to enable access to AB8500 power management @@ -725,6 +766,16 @@ config LPC_SCH LPC bridge function of the Intel SCH provides support for System Management Bus and General Purpose I/O. +config LPC_ICH + tristate "Intel ICH LPC" + depends on PCI + select MFD_CORE + help + The LPC bridge function of the Intel ICH provides support for + many functional units. This driver provides needed support for + other drivers to control these functions, currently GPIO and + watchdog. + config MFD_RDC321X tristate "Support for RDC-R321x southbridge" select MFD_CORE @@ -857,6 +908,11 @@ config MFD_RC5T583 Additional drivers must be enabled in order to use the different functionality of the device. +config MFD_STA2X11 + bool "STA2X11 multi function device support" + depends on STA2X11 + select MFD_CORE + config MFD_ANATOP bool "Support for Freescale i.MX on-chip ANATOP controller" depends on SOC_IMX6Q |