diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 91 |
1 files changed, 85 insertions, 6 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 425c5fba6cb1..67b54e0fd452 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -129,6 +129,7 @@ config MFD_AAT2870_CORE select MFD_CORE depends on I2C=y depends on GPIOLIB || COMPILE_TEST + depends on GPIOLIB_LEGACY help If you say yes here you get support for the AAT2870. This driver provides common support for accessing the device, @@ -1134,6 +1135,21 @@ config MFD_MENF21BMC This driver can also be built as a module. If so the module will be called menf21bmc. +config MFD_NCT6694 + tristate "Nuvoton NCT6694 support" + select MFD_CORE + depends on USB + help + This enables support for the Nuvoton USB device NCT6694, which shares + peripherals. + The Nuvoton NCT6694 is a peripheral expander with 16 GPIO chips, + 6 I2C controllers, 2 CANfd controllers, 2 Watchdog timers, ADC, + PWM, and RTC. + This driver provides core APIs to access the NCT6694 hardware + monitoring and control features. + Additional drivers must be enabled to utilize the specific + functionalities of the device. + config MFD_OCELOT tristate "Microsemi Ocelot External Control Support" depends on SPI_MASTER @@ -1238,6 +1254,19 @@ config MFD_QCOM_RPM Say M here if you want to include support for the Qualcomm RPM as a module. This will build a module called "qcom_rpm". +config MFD_SPACEMIT_P1 + tristate "SpacemiT P1 PMIC" + depends on ARCH_SPACEMIT || COMPILE_TEST + depends on I2C + select I2C_K1 + select MFD_SIMPLE_MFD_I2C + help + This option supports the I2C-based SpacemiT P1 PMIC, which + contains regulators, a power switch, GPIOs, an RTC, and more. + This option is selected when any of the supported sub-devices + is configured. The basic functionality is implemented by the + simple MFD I2C driver. + config MFD_SPMI_PMIC tristate "Qualcomm SPMI PMICs" depends on ARCH_QCOM || COMPILE_TEST @@ -1411,6 +1440,7 @@ config MFD_SEC_I2C config MFD_SI476X_CORE tristate "Silicon Laboratories 4761/64/68 AM/FM radio." depends on I2C + depends on GPIOLIB_LEGACY select MFD_CORE select REGMAP_I2C help @@ -1539,8 +1569,8 @@ config MFD_DB8500_PRCMU through a register map. config MFD_STMPE - bool "STMicroelectronics STMPE" - depends on I2C=y || SPI_MASTER=y + tristate "STMicroelectronics STMPE" + depends on I2C || SPI_MASTER depends on OF select MFD_CORE help @@ -1568,14 +1598,14 @@ menu "STMicroelectronics STMPE Interface Drivers" depends on MFD_STMPE config STMPE_I2C - bool "STMicroelectronics STMPE I2C Interface" - depends on I2C=y + tristate "STMicroelectronics STMPE I2C Interface" + depends on I2C default y help This is used to enable I2C interface of STMPE config STMPE_SPI - bool "STMicroelectronics STMPE SPI Interface" + tristate "STMicroelectronics STMPE SPI Interface" depends on SPI_MASTER help This is used to enable SPI interface of STMPE @@ -1641,6 +1671,17 @@ config MFD_TI_LMU LM36274. It consists of backlight, LED and regulator driver. It provides consistent device controls for lighting functions. +config MFD_BQ257XX + tristate "TI BQ257XX Buck/Boost Charge Controller" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + Support Texas Instruments BQ25703 Buck/Boost converter with + charge controller. It consists of regulators that provide + system voltage and OTG voltage, and a charger manager for + batteries containing one or more cells. + config MFD_OMAP_USB_HOST bool "TI OMAP USBHS core and TLL driver" depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 @@ -1977,7 +2018,7 @@ config MFD_TIMBERDALE multifunction device which exposes numerous platform devices. The timberdale FPGA can be found on the Intel Atom development board - for in-vehicle infontainment, called Russellville. + for in-vehicle infotainment, called Russellville. config MFD_TC3589X bool "Toshiba TC35892 and variants" @@ -2428,6 +2469,30 @@ config MFD_INTEL_M10_BMC_PMCI additional drivers must be enabled in order to use the functionality of the device. +config MFD_LOONGSON_SE + tristate "Loongson Security Engine chip controller driver" + depends on LOONGARCH && ACPI + select MFD_CORE + help + The Loongson Security Engine chip supports RNG, SM2, SM3 and + SM4 accelerator engines. Each engine have its own DMA buffer + provided by the controller. The kernel cannot directly send + commands to the engine and must first send them to the controller, + which will forward them to the corresponding engine. + +config MFD_LS2K_BMC_CORE + bool "Loongson-2K Board Management Controller Support" + depends on PCI && ACPI_GENERIC_GSI + select MFD_CORE + help + Say yes here to add support for the Loongson-2K BMC which is a Board + Management Controller connected to the PCIe bus. The device supports + multiple sub-devices like display and IPMI. This driver provides common + support for accessing the devices. + + The display is enabled by default in the driver, while the IPMI interface + is enabled independently through the IPMI_LS2K option in the IPMI section. + config MFD_QNAP_MCU tristate "QNAP microcontroller unit core driver" depends on SERIAL_DEV_BUS @@ -2481,5 +2546,19 @@ config MFD_UPBOARD_FPGA To compile this driver as a module, choose M here: the module will be called upboard-fpga. +config MFD_MAX7360 + tristate "Maxim MAX7360 I2C IO Expander" + depends on I2C + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + Say yes here to add support for Maxim MAX7360 device, embedding + keypad, rotary encoder, PWM and GPIO features. + + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + endmenu endif |