diff options
Diffstat (limited to 'drivers/mfd/db8500-prcmu.c')
| -rw-r--r-- | drivers/mfd/db8500-prcmu.c | 629 |
1 files changed, 511 insertions, 118 deletions
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 02a15d7cb3b0..a25ab9c6b5af 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -27,14 +27,14 @@ #include <linux/platform_device.h> #include <linux/uaccess.h> #include <linux/mfd/core.h> -#include <linux/mfd/db8500-prcmu.h> +#include <linux/mfd/dbx500-prcmu.h> #include <linux/regulator/db8500-prcmu.h> #include <linux/regulator/machine.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/db8500-regs.h> #include <mach/id.h> -#include "db8500-prcmu-regs.h" +#include "dbx500-prcmu-regs.h" /* Offset for the firmware version within the TCPM */ #define PRCMU_FW_VERSION_OFFSET 0xA4 @@ -131,12 +131,14 @@ #define MB1H_REQUEST_APE_OPP_100_VOLT 0x3 #define MB1H_RELEASE_APE_OPP_100_VOLT 0x4 #define MB1H_RELEASE_USB_WAKEUP 0x5 +#define MB1H_PLL_ON_OFF 0x6 /* Mailbox 1 Requests */ #define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0) #define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1) -#define PRCM_REQ_MB1_APE_OPP_100_RESTORE (PRCM_REQ_MB1 + 0x4) -#define PRCM_REQ_MB1_ARM_OPP_100_RESTORE (PRCM_REQ_MB1 + 0x8) +#define PRCM_REQ_MB1_PLL_ON_OFF (PRCM_REQ_MB1 + 0x4) +#define PLL_SOC1_OFF 0x4 +#define PLL_SOC1_ON 0x8 /* Mailbox 1 ACKs */ #define PRCM_ACK_MB1_CURRENT_ARM_OPP (PRCM_ACK_MB1 + 0x0) @@ -184,6 +186,11 @@ #define MB4H_HOTDOG 0x12 #define MB4H_HOTMON 0x13 #define MB4H_HOT_PERIOD 0x14 +#define MB4H_A9WDOG_CONF 0x16 +#define MB4H_A9WDOG_EN 0x17 +#define MB4H_A9WDOG_DIS 0x18 +#define MB4H_A9WDOG_LOAD 0x19 +#define MB4H_A9WDOG_KICK 0x20 /* Mailbox 4 Requests */ #define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE (PRCM_REQ_MB4 + 0x0) @@ -196,6 +203,13 @@ #define PRCM_REQ_MB4_HOT_PERIOD (PRCM_REQ_MB4 + 0x0) #define HOTMON_CONFIG_LOW BIT(0) #define HOTMON_CONFIG_HIGH BIT(1) +#define PRCM_REQ_MB4_A9WDOG_0 (PRCM_REQ_MB4 + 0x0) +#define PRCM_REQ_MB4_A9WDOG_1 (PRCM_REQ_MB4 + 0x1) +#define PRCM_REQ_MB4_A9WDOG_2 (PRCM_REQ_MB4 + 0x2) +#define PRCM_REQ_MB4_A9WDOG_3 (PRCM_REQ_MB4 + 0x3) +#define A9WDOG_AUTO_OFF_EN BIT(7) +#define A9WDOG_AUTO_OFF_DIS 0 +#define A9WDOG_ID_MASK 0xf /* Mailbox 5 Requests */ #define PRCM_REQ_MB5_I2C_SLAVE_OP (PRCM_REQ_MB5 + 0x0) @@ -412,7 +426,7 @@ struct clk_mgt { static DEFINE_SPINLOCK(clk_mgt_lock); -#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT), 0 } +#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT_OFF), 0 } struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = { CLK_MGT_ENTRY(SGACLK), CLK_MGT_ENTRY(UARTCLK), @@ -445,6 +459,35 @@ struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = { CLK_MGT_ENTRY(UICCCLK), }; +static struct regulator *hwacc_regulator[NUM_HW_ACC]; +static struct regulator *hwacc_ret_regulator[NUM_HW_ACC]; + +static bool hwacc_enabled[NUM_HW_ACC]; +static bool hwacc_ret_enabled[NUM_HW_ACC]; + +static const char *hwacc_regulator_name[NUM_HW_ACC] = { + [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp", + [HW_ACC_SVAPIPE] = "hwacc-sva-pipe", + [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp", + [HW_ACC_SIAPIPE] = "hwacc-sia-pipe", + [HW_ACC_SGA] = "hwacc-sga", + [HW_ACC_B2R2] = "hwacc-b2r2", + [HW_ACC_MCDE] = "hwacc-mcde", + [HW_ACC_ESRAM1] = "hwacc-esram1", + [HW_ACC_ESRAM2] = "hwacc-esram2", + [HW_ACC_ESRAM3] = "hwacc-esram3", + [HW_ACC_ESRAM4] = "hwacc-esram4", +}; + +static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = { + [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp-ret", + [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp-ret", + [HW_ACC_ESRAM1] = "hwacc-esram1-ret", + [HW_ACC_ESRAM2] = "hwacc-esram2-ret", + [HW_ACC_ESRAM3] = "hwacc-esram3-ret", + [HW_ACC_ESRAM4] = "hwacc-esram4-ret", +}; + /* * Used by MCDE to setup all necessary PRCMU registers */ @@ -493,55 +536,51 @@ static struct { } prcmu_version; -int prcmu_enable_dsipll(void) +int db8500_prcmu_enable_dsipll(void) { int i; unsigned int plldsifreq; /* Clear DSIPLL_RESETN */ - writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_CLR)); + writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR); /* Unclamp DSIPLL in/out */ - writel(PRCMU_UNCLAMP_DSIPLL, (_PRCMU_BASE + PRCM_MMIP_LS_CLAMP_CLR)); + writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR); if (prcmu_is_u8400()) plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400; else plldsifreq = PRCMU_PLLDSI_FREQ_SETTING; /* Set DSI PLL FREQ */ - writel(plldsifreq, (_PRCMU_BASE + PRCM_PLLDSI_FREQ)); - writel(PRCMU_DSI_PLLOUT_SEL_SETTING, - (_PRCMU_BASE + PRCM_DSI_PLLOUT_SEL)); + writel(plldsifreq, PRCM_PLLDSI_FREQ); + writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL); /* Enable Escape clocks */ - writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, - (_PRCMU_BASE + PRCM_DSITVCLK_DIV)); + writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV); /* Start DSI PLL */ - writel(PRCMU_ENABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE)); + writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE); /* Reset DSI PLL */ - writel(PRCMU_DSI_RESET_SW, (_PRCMU_BASE + PRCM_DSI_SW_RESET)); + writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET); for (i = 0; i < 10; i++) { - if ((readl(_PRCMU_BASE + PRCM_PLLDSI_LOCKP) & - PRCMU_PLLDSI_LOCKP_LOCKED) + if ((readl(PRCM_PLLDSI_LOCKP) & PRCMU_PLLDSI_LOCKP_LOCKED) == PRCMU_PLLDSI_LOCKP_LOCKED) break; udelay(100); } /* Set DSIPLL_RESETN */ - writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_SET)); + writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET); return 0; } -int prcmu_disable_dsipll(void) +int db8500_prcmu_disable_dsipll(void) { /* Disable dsi pll */ - writel(PRCMU_DISABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE)); + writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE); /* Disable escapeclock */ - writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, - (_PRCMU_BASE + PRCM_DSITVCLK_DIV)); + writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV); return 0; } -int prcmu_set_display_clocks(void) +int db8500_prcmu_set_display_clocks(void) { unsigned long flags; unsigned int dsiclk; @@ -554,15 +593,15 @@ int prcmu_set_display_clocks(void) spin_lock_irqsave(&clk_mgt_lock, flags); /* Grab the HW semaphore. */ - while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) cpu_relax(); - writel(dsiclk, (_PRCMU_BASE + PRCM_HDMICLK_MGT)); - writel(PRCMU_DSI_LP_CLOCK_SETTING, (_PRCMU_BASE + PRCM_TVCLK_MGT)); - writel(PRCMU_DPI_CLOCK_SETTING, (_PRCMU_BASE + PRCM_LCDCLK_MGT)); + writel(dsiclk, PRCM_HDMICLK_MGT); + writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT); + writel(PRCMU_DPI_CLOCK_SETTING, PRCM_LCDCLK_MGT); /* Release the HW semaphore. */ - writel(0, (_PRCMU_BASE + PRCM_SEM)); + writel(0, PRCM_SEM); spin_unlock_irqrestore(&clk_mgt_lock, flags); @@ -578,8 +617,8 @@ void prcmu_enable_spi2(void) unsigned long flags; spin_lock_irqsave(&gpiocr_lock, flags); - reg = readl(_PRCMU_BASE + PRCM_GPIOCR); - writel(reg | PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR); + reg = readl(PRCM_GPIOCR); + writel(reg | PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR); spin_unlock_irqrestore(&gpiocr_lock, flags); } @@ -592,8 +631,8 @@ void prcmu_disable_spi2(void) unsigned long flags; spin_lock_irqsave(&gpiocr_lock, flags); - reg = readl(_PRCMU_BASE + PRCM_GPIOCR); - writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR); + reg = readl(PRCM_GPIOCR); + writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR); spin_unlock_irqrestore(&gpiocr_lock, flags); } @@ -701,7 +740,7 @@ int prcmu_config_clkout(u8 clkout, u8 source, u8 div) spin_lock_irqsave(&clkout_lock, flags); - val = readl(_PRCMU_BASE + PRCM_CLKOCR); + val = readl(PRCM_CLKOCR); if (val & div_mask) { if (div) { if ((val & mask) != bits) { @@ -715,7 +754,7 @@ int prcmu_config_clkout(u8 clkout, u8 source, u8 div) } } } - writel((bits | (val & ~mask)), (_PRCMU_BASE + PRCM_CLKOCR)); + writel((bits | (val & ~mask)), PRCM_CLKOCR); requests[clkout] += (div ? 1 : -1); unlock_and_return: @@ -724,7 +763,7 @@ unlock_and_return: return r; } -int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) +int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) { unsigned long flags; @@ -732,7 +771,7 @@ int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) spin_lock_irqsave(&mb0_transfer.lock, flags); - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) cpu_relax(); writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0)); @@ -741,7 +780,7 @@ int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) writeb((keep_ulp_clk ? 1 : 0), (tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE)); writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI)); - writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET); spin_unlock_irqrestore(&mb0_transfer.lock, flags); @@ -770,18 +809,18 @@ static void config_wakeups(void) return; for (i = 0; i < 2; i++) { - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) cpu_relax(); writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500)); writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500)); writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0)); - writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET); } last_dbb_events = dbb_events; last_abb_events = abb_events; } -void prcmu_enable_wakeups(u32 wakeups) +void db8500_prcmu_enable_wakeups(u32 wakeups) { unsigned long flags; u32 bits; @@ -802,7 +841,7 @@ void prcmu_enable_wakeups(u32 wakeups) spin_unlock_irqrestore(&mb0_transfer.lock, flags); } -void prcmu_config_abb_event_readout(u32 abb_events) +void db8500_prcmu_config_abb_event_readout(u32 abb_events) { unsigned long flags; @@ -814,7 +853,7 @@ void prcmu_config_abb_event_readout(u32 abb_events) spin_unlock_irqrestore(&mb0_transfer.lock, flags); } -void prcmu_get_abb_event_buffer(void __iomem **buf) +void db8500_prcmu_get_abb_event_buffer(void __iomem **buf) { if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1) *buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_1_4500); @@ -823,13 +862,13 @@ void prcmu_get_abb_event_buffer(void __iomem **buf) } /** - * prcmu_set_arm_opp - set the appropriate ARM OPP + * db8500_prcmu_set_arm_opp - set the appropriate ARM OPP * @opp: The new ARM operating point to which transition is to be made * Returns: 0 on success, non-zero on failure * * This function sets the the operating point of the ARM. */ -int prcmu_set_arm_opp(u8 opp) +int db8500_prcmu_set_arm_opp(u8 opp) { int r; @@ -840,14 +879,14 @@ int prcmu_set_arm_opp(u8 opp) mutex_lock(&mb1_transfer.lock); - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) cpu_relax(); writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP)); writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP)); - writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); wait_for_completion(&mb1_transfer.work); if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) || @@ -860,11 +899,11 @@ int prcmu_set_arm_opp(u8 opp) } /** - * prcmu_get_arm_opp - get the current ARM OPP + * db8500_prcmu_get_arm_opp - get the current ARM OPP * * Returns: the current ARM OPP */ -int prcmu_get_arm_opp(void) +int db8500_prcmu_get_arm_opp(void) { return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_ARM_OPP); } @@ -876,7 +915,7 @@ int prcmu_get_arm_opp(void) */ int prcmu_get_ddr_opp(void) { - return readb(_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW); + return readb(PRCM_DDR_SUBSYS_APE_MINBW); } /** @@ -892,7 +931,7 @@ int prcmu_set_ddr_opp(u8 opp) return -EINVAL; /* Changing the DDR OPP can hang the hardware pre-v21 */ if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20()) - writeb(opp, (_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW)); + writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW); return 0; } @@ -909,14 +948,14 @@ int prcmu_set_ape_opp(u8 opp) mutex_lock(&mb1_transfer.lock); - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) cpu_relax(); writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP)); writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP)); - writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); wait_for_completion(&mb1_transfer.work); if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) || @@ -966,12 +1005,12 @@ int prcmu_request_ape_opp_100_voltage(bool enable) header = MB1H_RELEASE_APE_OPP_100_VOLT; } - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) cpu_relax(); writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); - writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); wait_for_completion(&mb1_transfer.work); if ((mb1_transfer.ack.header != header) || @@ -995,13 +1034,13 @@ int prcmu_release_usb_wakeup_state(void) mutex_lock(&mb1_transfer.lock); - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) cpu_relax(); writeb(MB1H_RELEASE_USB_WAKEUP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); - writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); wait_for_completion(&mb1_transfer.work); if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) || @@ -1013,15 +1052,169 @@ int prcmu_release_usb_wakeup_state(void) return r; } +static int request_pll(u8 clock, bool enable) +{ + int r = 0; + + if (clock == PRCMU_PLLSOC1) + clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF); + else + return -EINVAL; + + mutex_lock(&mb1_transfer.lock); + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(MB1H_PLL_ON_OFF, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + writeb(clock, (tcdm_base + PRCM_REQ_MB1_PLL_ON_OFF)); + + writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); + wait_for_completion(&mb1_transfer.work); + + if (mb1_transfer.ack.header != MB1H_PLL_ON_OFF) + r = -EIO; + + mutex_unlock(&mb1_transfer.lock); + + return r; +} + /** - * prcmu_set_epod - set the state of a EPOD (power domain) + * prcmu_set_hwacc - set the power state of a h/w accelerator + * @hwacc_dev: The hardware accelerator (enum hw_acc_dev). + * @state: The new power state (enum hw_acc_state). + * + * This function sets the power state of a hardware accelerator. + * This function should not be called from interrupt context. + * + * NOTE! Deprecated, to be removed when all users switched over to use the + * regulator framework API. + */ +int prcmu_set_hwacc(u16 hwacc_dev, u8 state) +{ + int r = 0; + bool ram_retention = false; + bool enable, enable_ret; + + /* check argument */ + BUG_ON(hwacc_dev >= NUM_HW_ACC); + + /* get state of switches */ + enable = hwacc_enabled[hwacc_dev]; + enable_ret = hwacc_ret_enabled[hwacc_dev]; + + /* set flag if retention is possible */ + switch (hwacc_dev) { + case HW_ACC_SVAMMDSP: + case HW_ACC_SIAMMDSP: + case HW_ACC_ESRAM1: + case HW_ACC_ESRAM2: + case HW_ACC_ESRAM3: + case HW_ACC_ESRAM4: + ram_retention = true; + break; + } + + /* check argument */ + BUG_ON(state > HW_ON); + BUG_ON(state == HW_OFF_RAMRET && !ram_retention); + + /* modify enable flags */ + switch (state) { + case HW_OFF: + enable_ret = false; + enable = false; + break; + case HW_ON: + enable = true; + break; + case HW_OFF_RAMRET: + enable_ret = true; + enable = false; + break; + } + + /* get regulator (lazy) */ + if (hwacc_regulator[hwacc_dev] == NULL) { + hwacc_regulator[hwacc_dev] = regulator_get(NULL, + hwacc_regulator_name[hwacc_dev]); + if (IS_ERR(hwacc_regulator[hwacc_dev])) { + pr_err("prcmu: failed to get supply %s\n", + hwacc_regulator_name[hwacc_dev]); + r = PTR_ERR(hwacc_regulator[hwacc_dev]); + goto out; + } + } + + if (ram_retention) { + if (hwacc_ret_regulator[hwacc_dev] == NULL) { + hwacc_ret_regulator[hwacc_dev] = regulator_get(NULL, + hwacc_ret_regulator_name[hwacc_dev]); + if (IS_ERR(hwacc_ret_regulator[hwacc_dev])) { + pr_err("prcmu: failed to get supply %s\n", + hwacc_ret_regulator_name[hwacc_dev]); + r = PTR_ERR(hwacc_ret_regulator[hwacc_dev]); + goto out; + } + } + } + + /* set regulators */ + if (ram_retention) { + if (enable_ret && !hwacc_ret_enabled[hwacc_dev]) { + r = regulator_enable(hwacc_ret_regulator[hwacc_dev]); + if (r < 0) { + pr_err("prcmu_set_hwacc: ret enable failed\n"); + goto out; + } + hwacc_ret_enabled[hwacc_dev] = true; + } + } + + if (enable && !hwacc_enabled[hwacc_dev]) { + r = regulator_enable(hwacc_regulator[hwacc_dev]); + if (r < 0) { + pr_err("prcmu_set_hwacc: enable failed\n"); + goto out; + } + hwacc_enabled[hwacc_dev] = true; + } + + if (!enable && hwacc_enabled[hwacc_dev]) { + r = regulator_disable(hwacc_regulator[hwacc_dev]); + if (r < 0) { + pr_err("prcmu_set_hwacc: disable failed\n"); + goto out; + } + hwacc_enabled[hwacc_dev] = false; + } + + if (ram_retention) { + if (!enable_ret && hwacc_ret_enabled[hwacc_dev]) { + r = regulator_disable(hwacc_ret_regulator[hwacc_dev]); + if (r < 0) { + pr_err("prcmu_set_hwacc: ret disable failed\n"); + goto out; + } + hwacc_ret_enabled[hwacc_dev] = false; + } + } + +out: + return r; +} +EXPORT_SYMBOL(prcmu_set_hwacc); + +/** + * db8500_prcmu_set_epod - set the state of a EPOD (power domain) * @epod_id: The EPOD to set * @epod_state: The new EPOD state * * This function sets the state of a EPOD (power domain). It may not be called * from interrupt context. */ -int prcmu_set_epod(u16 epod_id, u8 epod_state) +int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state) { int r = 0; bool ram_retention = false; @@ -1048,7 +1241,7 @@ int prcmu_set_epod(u16 epod_id, u8 epod_state) mutex_lock(&mb2_transfer.lock); /* wait for mailbox */ - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(2)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(2)) cpu_relax(); /* fill in mailbox */ @@ -1058,7 +1251,7 @@ int prcmu_set_epod(u16 epod_id, u8 epod_state) writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2)); - writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(2), PRCM_MBOX_CPU_SET); /* * The current firmware version does not handle errors correctly, @@ -1145,13 +1338,13 @@ static int request_sysclk(bool enable) spin_lock_irqsave(&mb3_transfer.lock, flags); - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(3)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(3)) cpu_relax(); writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT)); writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3)); - writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(3), PRCM_MBOX_CPU_SET); spin_unlock_irqrestore(&mb3_transfer.lock, flags); @@ -1177,7 +1370,7 @@ static int request_timclk(bool enable) if (!enable) val |= PRCM_TCR_STOP_TIMERS; - writel(val, (_PRCMU_BASE + PRCM_TCR)); + writel(val, PRCM_TCR); return 0; } @@ -1190,7 +1383,7 @@ static int request_reg_clock(u8 clock, bool enable) spin_lock_irqsave(&clk_mgt_lock, flags); /* Grab the HW semaphore. */ - while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) cpu_relax(); val = readl(_PRCMU_BASE + clk_mgt[clock].offset); @@ -1203,34 +1396,61 @@ static int request_reg_clock(u8 clock, bool enable) writel(val, (_PRCMU_BASE + clk_mgt[clock].offset)); /* Release the HW semaphore. */ - writel(0, (_PRCMU_BASE + PRCM_SEM)); + writel(0, PRCM_SEM); spin_unlock_irqrestore(&clk_mgt_lock, flags); return 0; } +static int request_sga_clock(u8 clock, bool enable) +{ + u32 val; + int ret; + + if (enable) { + val = readl(PRCM_CGATING_BYPASS); + writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS); + } + + ret = request_reg_clock(clock, enable); + + if (!ret && !enable) { + val = readl(PRCM_CGATING_BYPASS); + writel(val & ~PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS); + } + + return ret; +} + /** - * prcmu_request_clock() - Request for a clock to be enabled or disabled. + * db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled. * @clock: The clock for which the request is made. * @enable: Whether the clock should be enabled (true) or disabled (false). * * This function should only be used by the clock implementation. * Do not use it from any other place! */ -int prcmu_request_clock(u8 clock, bool enable) +int db8500_prcmu_request_clock(u8 clock, bool enable) { - if (clock < PRCMU_NUM_REG_CLOCKS) - return request_reg_clock(clock, enable); - else if (clock == PRCMU_TIMCLK) + switch(clock) { + case PRCMU_SGACLK: + return request_sga_clock(clock, enable); + case PRCMU_TIMCLK: return request_timclk(enable); - else if (clock == PRCMU_SYSCLK) + case PRCMU_SYSCLK: return request_sysclk(enable); - else - return -EINVAL; + case PRCMU_PLLSOC1: + return request_pll(clock, enable); + default: + break; + } + if (clock < PRCMU_NUM_REG_CLOCKS) + return request_reg_clock(clock, enable); + return -EINVAL; } -int prcmu_config_esram0_deep_sleep(u8 state) +int db8500_prcmu_config_esram0_deep_sleep(u8 state) { if ((state > ESRAM0_DEEP_SLEEP_STATE_RET) || (state < ESRAM0_DEEP_SLEEP_STATE_OFF)) @@ -1238,7 +1458,7 @@ int prcmu_config_esram0_deep_sleep(u8 state) mutex_lock(&mb4_transfer.lock); - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) cpu_relax(); writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); @@ -1248,7 +1468,7 @@ int prcmu_config_esram0_deep_sleep(u8 state) (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE)); writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST)); - writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET); wait_for_completion(&mb4_transfer.work); mutex_unlock(&mb4_transfer.lock); @@ -1260,13 +1480,13 @@ int prcmu_config_hotdog(u8 threshold) { mutex_lock(&mb4_transfer.lock); - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) cpu_relax(); writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD)); writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); - writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET); wait_for_completion(&mb4_transfer.work); mutex_unlock(&mb4_transfer.lock); @@ -1278,7 +1498,7 @@ int prcmu_config_hotmon(u8 low, u8 high) { mutex_lock(&mb4_transfer.lock); - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) cpu_relax(); writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW)); @@ -1287,7 +1507,7 @@ int prcmu_config_hotmon(u8 low, u8 high) (tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG)); writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); - writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET); wait_for_completion(&mb4_transfer.work); mutex_unlock(&mb4_transfer.lock); @@ -1299,13 +1519,13 @@ static int config_hot_period(u16 val) { mutex_lock(&mb4_transfer.lock); - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) cpu_relax(); writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD)); writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); - writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET); wait_for_completion(&mb4_transfer.work); mutex_unlock(&mb4_transfer.lock); @@ -1326,6 +1546,78 @@ int prcmu_stop_temp_sense(void) return config_hot_period(0xFFFF); } +static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3) +{ + + mutex_lock(&mb4_transfer.lock); + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + cpu_relax(); + + writeb(d0, (tcdm_base + PRCM_REQ_MB4_A9WDOG_0)); + writeb(d1, (tcdm_base + PRCM_REQ_MB4_A9WDOG_1)); + writeb(d2, (tcdm_base + PRCM_REQ_MB4_A9WDOG_2)); + writeb(d3, (tcdm_base + PRCM_REQ_MB4_A9WDOG_3)); + + writeb(cmd, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); + + writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET); + wait_for_completion(&mb4_transfer.work); + + mutex_unlock(&mb4_transfer.lock); + + return 0; + +} + +int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) +{ + BUG_ON(num == 0 || num > 0xf); + return prcmu_a9wdog(MB4H_A9WDOG_CONF, num, 0, 0, + sleep_auto_off ? A9WDOG_AUTO_OFF_EN : + A9WDOG_AUTO_OFF_DIS); +} + +int prcmu_enable_a9wdog(u8 id) +{ + return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0); +} + +int prcmu_disable_a9wdog(u8 id) +{ + return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0); +} + +int prcmu_kick_a9wdog(u8 id) +{ + return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0); +} + +/* + * timeout is 28 bit, in ms. + */ +#define MAX_WATCHDOG_TIMEOUT 131000 +int prcmu_load_a9wdog(u8 id, u32 timeout) +{ + if (timeout > MAX_WATCHDOG_TIMEOUT) + /* + * Due to calculation bug in prcmu fw, timeouts + * can't be bigger than 131 seconds. + */ + return -EINVAL; + + return prcmu_a9wdog(MB4H_A9WDOG_LOAD, + (id & A9WDOG_ID_MASK) | + /* + * Put the lowest 28 bits of timeout at + * offset 4. Four first bits are used for id. + */ + (u8)((timeout << 4) & 0xf0), + (u8)((timeout >> 4) & 0xff), + (u8)((timeout >> 12) & 0xff), + (u8)((timeout >> 20) & 0xff)); +} + /** * prcmu_set_clock_divider() - Configure the clock divider. * @clock: The clock for which the request is made. @@ -1345,7 +1637,7 @@ int prcmu_set_clock_divider(u8 clock, u8 divider) spin_lock_irqsave(&clk_mgt_lock, flags); /* Grab the HW semaphore. */ - while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) cpu_relax(); val = readl(_PRCMU_BASE + clk_mgt[clock].offset); @@ -1354,7 +1646,7 @@ int prcmu_set_clock_divider(u8 clock, u8 divider) writel(val, (_PRCMU_BASE + clk_mgt[clock].offset)); /* Release the HW semaphore. */ - writel(0, (_PRCMU_BASE + PRCM_SEM)); + writel(0, PRCM_SEM); spin_unlock_irqrestore(&clk_mgt_lock, flags); @@ -1380,7 +1672,7 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) mutex_lock(&mb5_transfer.lock); - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) cpu_relax(); writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); @@ -1388,7 +1680,7 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL)); - writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); if (!wait_for_completion_timeout(&mb5_transfer.work, msecs_to_jiffies(20000))) { @@ -1426,7 +1718,7 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) mutex_lock(&mb5_transfer.lock); - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) cpu_relax(); writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); @@ -1434,7 +1726,7 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL)); - writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); if (!wait_for_completion_timeout(&mb5_transfer.work, msecs_to_jiffies(20000))) { @@ -1456,21 +1748,44 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) void prcmu_ac_wake_req(void) { u32 val; + u32 status; mutex_lock(&mb0_transfer.ac_wake_lock); - val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ); + val = readl(PRCM_HOSTACCESS_REQ); if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ) goto unlock_and_return; atomic_set(&ac_wake_req_state, 1); - writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ), - (_PRCMU_BASE + PRCM_HOSTACCESS_REQ)); +retry: + writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ), PRCM_HOSTACCESS_REQ); if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work, - msecs_to_jiffies(20000))) { - pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + msecs_to_jiffies(5000))) { + pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n", + __func__); + goto unlock_and_return; + } + + /* + * The modem can generate an AC_WAKE_ACK, and then still go to sleep. + * As a workaround, we wait, and then check that the modem is indeed + * awake (in terms of the value of the PRCM_MOD_AWAKE_STATUS + * register, which may not be the whole truth). + */ + udelay(400); + status = (readl(PRCM_MOD_AWAKE_STATUS) & BITS(0, 2)); + if (status != (PRCM_MOD_AWAKE_STATUS_PRCM_MOD_AAPD_AWAKE | + PRCM_MOD_AWAKE_STATUS_PRCM_MOD_COREPD_AWAKE)) { + pr_err("prcmu: %s received ack, but modem not awake (0x%X).\n", + __func__, status); + udelay(1200); + writel(val, PRCM_HOSTACCESS_REQ); + if (wait_for_completion_timeout(&mb0_transfer.ac_wake_work, + msecs_to_jiffies(5000))) + goto retry; + pr_crit("prcmu: %s timed out (5 s) waiting for AC_SLEEP_ACK.\n", __func__); } @@ -1487,16 +1802,16 @@ void prcmu_ac_sleep_req() mutex_lock(&mb0_transfer.ac_wake_lock); - val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ); + val = readl(PRCM_HOSTACCESS_REQ); if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)) goto unlock_and_return; writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ), - (_PRCMU_BASE + PRCM_HOSTACCESS_REQ)); + PRCM_HOSTACCESS_REQ); if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work, - msecs_to_jiffies(20000))) { - pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + msecs_to_jiffies(5000))) { + pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n", __func__); } @@ -1506,21 +1821,32 @@ unlock_and_return: mutex_unlock(&mb0_transfer.ac_wake_lock); } -bool prcmu_is_ac_wake_requested(void) +bool db8500_prcmu_is_ac_wake_requested(void) { return (atomic_read(&ac_wake_req_state) != 0); } /** - * prcmu_system_reset - System reset + * db8500_prcmu_system_reset - System reset * - * Saves the reset reason code and then sets the APE_SOFRST register which + * Saves the reset reason code and then sets the APE_SOFTRST register which * fires interrupt to fw */ -void prcmu_system_reset(u16 reset_code) +void db8500_prcmu_system_reset(u16 reset_code) { writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON)); - writel(1, (_PRCMU_BASE + PRCM_APE_SOFTRST)); + writel(1, PRCM_APE_SOFTRST); +} + +/** + * db8500_prcmu_get_reset_code - Retrieve SW reset reason code + * + * Retrieves the reset reason code stored by prcmu_system_reset() before + * last restart. + */ +u16 db8500_prcmu_get_reset_code(void) +{ + return readw(tcdm_base + PRCM_SW_RST_REASON); } /** @@ -1530,11 +1856,11 @@ void prcmu_modem_reset(void) { mutex_lock(&mb1_transfer.lock); - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) cpu_relax(); writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); - writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); wait_for_completion(&mb1_transfer.work); /* @@ -1551,11 +1877,11 @@ static void ack_dbb_wakeup(void) spin_lock_irqsave(&mb0_transfer.lock, flags); - while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) cpu_relax(); writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0)); - writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET); spin_unlock_irqrestore(&mb0_transfer.lock, flags); } @@ -1600,7 +1926,7 @@ static bool read_mailbox_0(void) r = false; break; } - writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR); return r; } @@ -1613,7 +1939,7 @@ static bool read_mailbox_1(void) PRCM_ACK_MB1_CURRENT_APE_OPP); mb1_transfer.ack.ape_voltage_status = readb(tcdm_base + PRCM_ACK_MB1_APE_VOLTAGE_STATUS); - writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR); complete(&mb1_transfer.work); return false; } @@ -1621,14 +1947,14 @@ static bool read_mailbox_1(void) static bool read_mailbox_2(void) { mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS); - writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR); complete(&mb2_transfer.work); return false; } static bool read_mailbox_3(void) { - writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR); return false; } @@ -1643,6 +1969,11 @@ static bool read_mailbox_4(void) case MB4H_HOTDOG: case MB4H_HOTMON: case MB4H_HOT_PERIOD: + case MB4H_A9WDOG_CONF: + case MB4H_A9WDOG_EN: + case MB4H_A9WDOG_DIS: + case MB4H_A9WDOG_LOAD: + case MB4H_A9WDOG_KICK: break; default: print_unknown_header_warning(4, header); @@ -1650,7 +1981,7 @@ static bool read_mailbox_4(void) break; } - writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR); if (do_complete) complete(&mb4_transfer.work); @@ -1662,20 +1993,20 @@ static bool read_mailbox_5(void) { mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS); mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL); - writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR); complete(&mb5_transfer.work); return false; } static bool read_mailbox_6(void) { - writel(MBOX_BIT(6), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR); return false; } static bool read_mailbox_7(void) { - writel(MBOX_BIT(7), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR); return false; } @@ -1696,7 +2027,7 @@ static irqreturn_t prcmu_irq_handler(int irq, void *data) u8 n; irqreturn_t r; - bits = (readl(_PRCMU_BASE + PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS); + bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS); if (unlikely(!bits)) return IRQ_NONE; @@ -1768,7 +2099,7 @@ static struct irq_chip prcmu_irq_chip = { .irq_unmask = prcmu_irq_unmask, }; -void __init prcmu_early_init(void) +void __init db8500_prcmu_early_init(void) { unsigned int i; @@ -1826,6 +2157,16 @@ void __init prcmu_early_init(void) } } +static void __init db8500_prcmu_init_clkforce(void) +{ + u32 val; + + val = readl(PRCM_A9PL_FORCE_CLKEN); + val &= ~(PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN | + PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN); + writel(val, (PRCM_A9PL_FORCE_CLKEN)); +} + /* * Power domain switches (ePODs) modeled as regulators for the DB8500 SoC */ @@ -1861,7 +2202,42 @@ static struct regulator_consumer_supply db8500_vsmps2_consumers[] = { static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = { REGULATOR_SUPPLY("vsupply", "b2r2.0"), - REGULATOR_SUPPLY("vsupply", "mcde.0"), + REGULATOR_SUPPLY("vsupply", "mcde"), +}; + +/* SVA MMDSP regulator switch */ +static struct regulator_consumer_supply db8500_svammdsp_consumers[] = { + REGULATOR_SUPPLY("sva-mmdsp", "cm_control"), +}; + +/* SVA pipe regulator switch */ +static struct regulator_consumer_supply db8500_svapipe_consumers[] = { + REGULATOR_SUPPLY("sva-pipe", "cm_control"), +}; + +/* SIA MMDSP regulator switch */ +static struct regulator_consumer_supply db8500_siammdsp_consumers[] = { + REGULATOR_SUPPLY("sia-mmdsp", "cm_control"), +}; + +/* SIA pipe regulator switch */ +static struct regulator_consumer_supply db8500_siapipe_consumers[] = { + REGULATOR_SUPPLY("sia-pipe", "cm_control"), +}; + +static struct regulator_consumer_supply db8500_sga_consumers[] = { + REGULATOR_SUPPLY("v-mali", NULL), +}; + +/* ESRAM1 and 2 regulator switch */ +static struct regulator_consumer_supply db8500_esram12_consumers[] = { + REGULATOR_SUPPLY("esram12", "cm_control"), +}; + +/* ESRAM3 and 4 regulator switch */ +static struct regulator_consumer_supply db8500_esram34_consumers[] = { + REGULATOR_SUPPLY("v-esram34", "mcde"), + REGULATOR_SUPPLY("esram34", "cm_control"), }; static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { @@ -1923,6 +2299,8 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { .name = "db8500-sva-mmdsp", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .consumer_supplies = db8500_svammdsp_consumers, + .num_consumer_supplies = ARRAY_SIZE(db8500_svammdsp_consumers), }, [DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = { .constraints = { @@ -1937,6 +2315,8 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { .name = "db8500-sva-pipe", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .consumer_supplies = db8500_svapipe_consumers, + .num_consumer_supplies = ARRAY_SIZE(db8500_svapipe_consumers), }, [DB8500_REGULATOR_SWITCH_SIAMMDSP] = { .supply_regulator = "db8500-vape", @@ -1944,6 +2324,8 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { .name = "db8500-sia-mmdsp", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .consumer_supplies = db8500_siammdsp_consumers, + .num_consumer_supplies = ARRAY_SIZE(db8500_siammdsp_consumers), }, [DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = { .constraints = { @@ -1957,6 +2339,8 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { .name = "db8500-sia-pipe", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .consumer_supplies = db8500_siapipe_consumers, + .num_consumer_supplies = ARRAY_SIZE(db8500_siapipe_consumers), }, [DB8500_REGULATOR_SWITCH_SGA] = { .supply_regulator = "db8500-vape", @@ -1964,6 +2348,9 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { .name = "db8500-sga", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .consumer_supplies = db8500_sga_consumers, + .num_consumer_supplies = ARRAY_SIZE(db8500_sga_consumers), + }, [DB8500_REGULATOR_SWITCH_B2R2_MCDE] = { .supply_regulator = "db8500-vape", @@ -1980,6 +2367,8 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { .name = "db8500-esram12", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .consumer_supplies = db8500_esram12_consumers, + .num_consumer_supplies = ARRAY_SIZE(db8500_esram12_consumers), }, [DB8500_REGULATOR_SWITCH_ESRAM12RET] = { .constraints = { @@ -1993,6 +2382,8 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { .name = "db8500-esram34", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .consumer_supplies = db8500_esram34_consumers, + .num_consumer_supplies = ARRAY_SIZE(db8500_esram34_consumers), }, [DB8500_REGULATOR_SWITCH_ESRAM34RET] = { .constraints = { @@ -2024,8 +2415,10 @@ static int __init db8500_prcmu_probe(struct platform_device *pdev) if (ux500_is_svp()) return -ENODEV; + db8500_prcmu_init_clkforce(); + /* Clean up the mailbox interrupts after pre-kernel code. */ - writel(ALL_MBOX_BITS, (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR); err = request_threaded_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL); |