diff options
Diffstat (limited to 'drivers/misc/sgi-gru')
| -rw-r--r-- | drivers/misc/sgi-gru/grufault.c | 49 | ||||
| -rw-r--r-- | drivers/misc/sgi-gru/grufile.c | 258 | ||||
| -rw-r--r-- | drivers/misc/sgi-gru/grumain.c | 9 | ||||
| -rw-r--r-- | drivers/misc/sgi-gru/grutables.h | 14 |
4 files changed, 260 insertions, 70 deletions
diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c index d3cacd696b38..a78aa798d50b 100644 --- a/drivers/misc/sgi-gru/grufault.c +++ b/drivers/misc/sgi-gru/grufault.c @@ -134,19 +134,6 @@ static void gru_cb_set_istatus_active(struct gru_instruction_bits *cbk) } /* - * Convert a interrupt IRQ to a pointer to the GRU GTS that caused the - * interrupt. Interrupts are always sent to a cpu on the blade that contains the - * GRU (except for headless blades which are not currently supported). A blade - * has N grus; a block of N consecutive IRQs is assigned to the GRUs. The IRQ - * number uniquely identifies the GRU chiplet on the local blade that caused the - * interrupt. Always called in interrupt context. - */ -static inline struct gru_state *irq_to_gru(int irq) -{ - return &gru_base[uv_numa_blade_id()]->bs_grus[irq - IRQ_GRU]; -} - -/* * Read & clear a TFM * * The GRU has an array of fault maps. A map is private to a cpu @@ -449,7 +436,7 @@ failactive: * Note that this is the interrupt handler that is registered with linux * interrupt handlers. */ -irqreturn_t gru_intr(int irq, void *dev_id) +static irqreturn_t gru_intr(int chiplet, int blade) { struct gru_state *gru; struct gru_tlb_fault_map imap, dmap; @@ -459,13 +446,18 @@ irqreturn_t gru_intr(int irq, void *dev_id) STAT(intr); - gru = irq_to_gru(irq); + gru = &gru_base[blade]->bs_grus[chiplet]; if (!gru) { - dev_err(grudev, "GRU: invalid interrupt: cpu %d, irq %d\n", - raw_smp_processor_id(), irq); + dev_err(grudev, "GRU: invalid interrupt: cpu %d, chiplet %d\n", + raw_smp_processor_id(), chiplet); return IRQ_NONE; } get_clear_fault_map(gru, &imap, &dmap); + gru_dbg(grudev, + "cpu %d, chiplet %d, gid %d, imap %016lx %016lx, dmap %016lx %016lx\n", + smp_processor_id(), chiplet, gru->gs_gid, + imap.fault_bits[0], imap.fault_bits[1], + dmap.fault_bits[0], dmap.fault_bits[1]); for_each_cbr_in_tfm(cbrnum, dmap.fault_bits) { complete(gru->gs_blade->bs_async_wq); @@ -503,6 +495,29 @@ irqreturn_t gru_intr(int irq, void *dev_id) return IRQ_HANDLED; } +irqreturn_t gru0_intr(int irq, void *dev_id) +{ + return gru_intr(0, uv_numa_blade_id()); +} + +irqreturn_t gru1_intr(int irq, void *dev_id) +{ + return gru_intr(1, uv_numa_blade_id()); +} + +irqreturn_t gru_intr_mblade(int irq, void *dev_id) +{ + int blade; + + for_each_possible_blade(blade) { + if (uv_blade_nr_possible_cpus(blade)) + continue; + gru_intr(0, blade); + gru_intr(1, blade); + } + return IRQ_HANDLED; +} + static int gru_user_dropin(struct gru_thread_state *gts, struct gru_tlb_fault_handle *tfh, diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 0a6d2a5a01f3..22b8b2733a24 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -35,6 +35,9 @@ #include <linux/interrupt.h> #include <linux/proc_fs.h> #include <linux/uaccess.h> +#ifdef CONFIG_X86_64 +#include <asm/uv/uv_irq.h> +#endif #include <asm/uv/uv.h> #include "gru.h" #include "grulib.h" @@ -130,7 +133,6 @@ static int gru_create_new_context(unsigned long arg) struct gru_vma_data *vdata; int ret = -EINVAL; - if (copy_from_user(&req, (void __user *)arg, sizeof(req))) return -EFAULT; @@ -302,34 +304,210 @@ fail: return -ENOMEM; } -#ifdef CONFIG_IA64 +static void gru_free_tables(void) +{ + int bid; + int order = get_order(sizeof(struct gru_state) * + GRU_CHIPLETS_PER_BLADE); -static int get_base_irq(void) + for (bid = 0; bid < GRU_MAX_BLADES; bid++) + free_pages((unsigned long)gru_base[bid], order); +} + +static unsigned long gru_chiplet_cpu_to_mmr(int chiplet, int cpu, int *corep) { - return IRQ_GRU; + unsigned long mmr = 0; + int core; + + /* + * We target the cores of a blade and not the hyperthreads themselves. + * There is a max of 8 cores per socket and 2 sockets per blade, + * making for a max total of 16 cores (i.e., 16 CPUs without + * hyperthreading and 32 CPUs with hyperthreading). + */ + core = uv_cpu_core_number(cpu) + UV_MAX_INT_CORES * uv_cpu_socket_number(cpu); + if (core >= GRU_NUM_TFM || uv_cpu_ht_number(cpu)) + return 0; + + if (chiplet == 0) { + mmr = UVH_GR0_TLB_INT0_CONFIG + + core * (UVH_GR0_TLB_INT1_CONFIG - UVH_GR0_TLB_INT0_CONFIG); + } else if (chiplet == 1) { + mmr = UVH_GR1_TLB_INT0_CONFIG + + core * (UVH_GR1_TLB_INT1_CONFIG - UVH_GR1_TLB_INT0_CONFIG); + } else { + BUG(); + } + + *corep = core; + return mmr; } -#elif defined CONFIG_X86_64 +#ifdef CONFIG_IA64 + +static int gru_irq_count[GRU_CHIPLETS_PER_BLADE]; -static void noop(unsigned int irq) +static void gru_noop(unsigned int irq) { } -static struct irq_chip gru_chip = { - .name = "gru", - .mask = noop, - .unmask = noop, - .ack = noop, +static struct irq_chip gru_chip[GRU_CHIPLETS_PER_BLADE] = { + [0 ... GRU_CHIPLETS_PER_BLADE - 1] { + .mask = gru_noop, + .unmask = gru_noop, + .ack = gru_noop + } }; -static int get_base_irq(void) +static int gru_chiplet_setup_tlb_irq(int chiplet, char *irq_name, + irq_handler_t irq_handler, int cpu, int blade) +{ + unsigned long mmr; + int irq = IRQ_GRU + chiplet; + int ret, core; + + mmr = gru_chiplet_cpu_to_mmr(chiplet, cpu, &core); + if (mmr == 0) + return 0; + + if (gru_irq_count[chiplet] == 0) { + gru_chip[chiplet].name = irq_name; + ret = set_irq_chip(irq, &gru_chip[chiplet]); + if (ret) { + printk(KERN_ERR "%s: set_irq_chip failed, errno=%d\n", + GRU_DRIVER_ID_STR, -ret); + return ret; + } + + ret = request_irq(irq, irq_handler, 0, irq_name, NULL); + if (ret) { + printk(KERN_ERR "%s: request_irq failed, errno=%d\n", + GRU_DRIVER_ID_STR, -ret); + return ret; + } + } + gru_irq_count[chiplet]++; + + return 0; +} + +static void gru_chiplet_teardown_tlb_irq(int chiplet, int cpu, int blade) +{ + unsigned long mmr; + int core, irq = IRQ_GRU + chiplet; + + if (gru_irq_count[chiplet] == 0) + return; + + mmr = gru_chiplet_cpu_to_mmr(chiplet, cpu, &core); + if (mmr == 0) + return; + + if (--gru_irq_count[chiplet] == 0) + free_irq(irq, NULL); +} + +#elif defined CONFIG_X86_64 + +static int gru_chiplet_setup_tlb_irq(int chiplet, char *irq_name, + irq_handler_t irq_handler, int cpu, int blade) +{ + unsigned long mmr; + int irq, core; + int ret; + + mmr = gru_chiplet_cpu_to_mmr(chiplet, cpu, &core); + if (mmr == 0) + return 0; + + irq = uv_setup_irq(irq_name, cpu, blade, mmr, UV_AFFINITY_CPU); + if (irq < 0) { + printk(KERN_ERR "%s: uv_setup_irq failed, errno=%d\n", + GRU_DRIVER_ID_STR, -irq); + return irq; + } + + ret = request_irq(irq, irq_handler, 0, irq_name, NULL); + if (ret) { + uv_teardown_irq(irq); + printk(KERN_ERR "%s: request_irq failed, errno=%d\n", + GRU_DRIVER_ID_STR, -ret); + return ret; + } + gru_base[blade]->bs_grus[chiplet].gs_irq[core] = irq; + return 0; +} + +static void gru_chiplet_teardown_tlb_irq(int chiplet, int cpu, int blade) { - set_irq_chip(IRQ_GRU, &gru_chip); - set_irq_chip(IRQ_GRU + 1, &gru_chip); - return IRQ_GRU; + int irq, core; + unsigned long mmr; + + mmr = gru_chiplet_cpu_to_mmr(chiplet, cpu, &core); + if (mmr) { + irq = gru_base[blade]->bs_grus[chiplet].gs_irq[core]; + if (irq) { + free_irq(irq, NULL); + uv_teardown_irq(irq); + } + } } + #endif +static void gru_teardown_tlb_irqs(void) +{ + int blade; + int cpu; + + for_each_online_cpu(cpu) { + blade = uv_cpu_to_blade_id(cpu); + gru_chiplet_teardown_tlb_irq(0, cpu, blade); + gru_chiplet_teardown_tlb_irq(1, cpu, blade); + } + for_each_possible_blade(blade) { + if (uv_blade_nr_possible_cpus(blade)) + continue; + gru_chiplet_teardown_tlb_irq(0, 0, blade); + gru_chiplet_teardown_tlb_irq(1, 0, blade); + } +} + +static int gru_setup_tlb_irqs(void) +{ + int blade; + int cpu; + int ret; + + for_each_online_cpu(cpu) { + blade = uv_cpu_to_blade_id(cpu); + ret = gru_chiplet_setup_tlb_irq(0, "GRU0_TLB", gru0_intr, cpu, blade); + if (ret != 0) + goto exit1; + + ret = gru_chiplet_setup_tlb_irq(1, "GRU1_TLB", gru1_intr, cpu, blade); + if (ret != 0) + goto exit1; + } + for_each_possible_blade(blade) { + if (uv_blade_nr_possible_cpus(blade)) + continue; + ret = gru_chiplet_setup_tlb_irq(0, "GRU0_TLB", gru_intr_mblade, 0, blade); + if (ret != 0) + goto exit1; + + ret = gru_chiplet_setup_tlb_irq(1, "GRU1_TLB", gru_intr_mblade, 0, blade); + if (ret != 0) + goto exit1; + } + + return 0; + +exit1: + gru_teardown_tlb_irqs(); + return ret; +} + /* * gru_init * @@ -337,8 +515,7 @@ static int get_base_irq(void) */ static int __init gru_init(void) { - int ret, irq, chip; - char id[10]; + int ret; if (!is_uv_system()) return 0; @@ -353,41 +530,29 @@ static int __init gru_init(void) gru_end_paddr = gru_start_paddr + GRU_MAX_BLADES * GRU_SIZE; printk(KERN_INFO "GRU space: 0x%lx - 0x%lx\n", gru_start_paddr, gru_end_paddr); - irq = get_base_irq(); - for (chip = 0; chip < GRU_CHIPLETS_PER_BLADE; chip++) { - ret = request_irq(irq + chip, gru_intr, 0, id, NULL); - /* TODO: fix irq handling on x86. For now ignore failure because - * interrupts are not required & not yet fully supported */ - if (ret) { - printk(KERN_WARNING - "!!!WARNING: GRU ignoring request failure!!!\n"); - ret = 0; - } - if (ret) { - printk(KERN_ERR "%s: request_irq failed\n", - GRU_DRIVER_ID_STR); - goto exit1; - } - } - ret = misc_register(&gru_miscdev); if (ret) { printk(KERN_ERR "%s: misc_register failed\n", GRU_DRIVER_ID_STR); - goto exit1; + goto exit0; } ret = gru_proc_init(); if (ret) { printk(KERN_ERR "%s: proc init failed\n", GRU_DRIVER_ID_STR); - goto exit2; + goto exit1; } ret = gru_init_tables(gru_start_paddr, gru_start_vaddr); if (ret) { printk(KERN_ERR "%s: init tables failed\n", GRU_DRIVER_ID_STR); - goto exit3; + goto exit2; } + + ret = gru_setup_tlb_irqs(); + if (ret != 0) + goto exit3; + gru_kservices_init(); printk(KERN_INFO "%s: v%s\n", GRU_DRIVER_ID_STR, @@ -395,31 +560,24 @@ static int __init gru_init(void) return 0; exit3: - gru_proc_exit(); + gru_free_tables(); exit2: - misc_deregister(&gru_miscdev); + gru_proc_exit(); exit1: - for (--chip; chip >= 0; chip--) - free_irq(irq + chip, NULL); + misc_deregister(&gru_miscdev); +exit0: return ret; } static void __exit gru_exit(void) { - int i, bid; - int order = get_order(sizeof(struct gru_state) * - GRU_CHIPLETS_PER_BLADE); - if (!is_uv_system()) return; - for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++) - free_irq(IRQ_GRU + i, NULL); + gru_teardown_tlb_irqs(); gru_kservices_exit(); - for (bid = 0; bid < GRU_MAX_BLADES; bid++) - free_pages((unsigned long)gru_base[bid], order); - + gru_free_tables(); misc_deregister(&gru_miscdev); gru_proc_exit(); } diff --git a/drivers/misc/sgi-gru/grumain.c b/drivers/misc/sgi-gru/grumain.c index a383271d3912..120c70c5a28a 100644 --- a/drivers/misc/sgi-gru/grumain.c +++ b/drivers/misc/sgi-gru/grumain.c @@ -49,12 +49,16 @@ struct device *grudev = &gru_device; /* * Select a gru fault map to be used by the current cpu. Note that * multiple cpus may be using the same map. - * ZZZ should "shift" be used?? Depends on HT cpu numbering * ZZZ should be inline but did not work on emulator */ int gru_cpu_fault_map_id(void) { - return uv_blade_processor_id() % GRU_NUM_TFM; + int cpu = smp_processor_id(); + int id, core; + + core = uv_cpu_core_number(cpu); + id = core + UV_MAX_INT_CORES * uv_cpu_socket_number(cpu); + return id; } /*--------- ASID Management ------------------------------------------- @@ -605,6 +609,7 @@ void gru_load_context(struct gru_thread_state *gts) cch->unmap_enable = 1; cch->tfm_done_bit_enable = 1; cch->cb_int_enable = 1; + cch->tlb_int_select = 0; /* For now, ints go to cpu 0 */ } else { cch->unmap_enable = 0; cch->tfm_done_bit_enable = 0; diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h index f0c7308a36bb..d83e36715e6b 100644 --- a/drivers/misc/sgi-gru/grutables.h +++ b/drivers/misc/sgi-gru/grutables.h @@ -444,6 +444,7 @@ struct gru_state { in use */ struct gru_thread_state *gs_gts[GRU_NUM_CCH]; /* GTS currently using the context */ + int gs_irq[GRU_NUM_TFM]; /* Interrupt irqs */ }; /* @@ -610,6 +611,15 @@ static inline int is_kernel_context(struct gru_thread_state *gts) return !gts->ts_mm; } +/* + * The following are for Nehelem-EX. A more general scheme is needed for + * future processors. + */ +#define UV_MAX_INT_CORES 8 +#define uv_cpu_socket_number(p) ((cpu_physical_id(p) >> 5) & 1) +#define uv_cpu_ht_number(p) (cpu_physical_id(p) & 1) +#define uv_cpu_core_number(p) (((cpu_physical_id(p) >> 2) & 4) | \ + ((cpu_physical_id(p) >> 1) & 3)) /*----------------------------------------------------------------------------- * Function prototypes & externs */ @@ -633,9 +643,11 @@ extern void gts_drop(struct gru_thread_state *gts); extern void gru_tgh_flush_init(struct gru_state *gru); extern int gru_kservices_init(void); extern void gru_kservices_exit(void); +extern irqreturn_t gru0_intr(int irq, void *dev_id); +extern irqreturn_t gru1_intr(int irq, void *dev_id); +extern irqreturn_t gru_intr_mblade(int irq, void *dev_id); extern int gru_dump_chiplet_request(unsigned long arg); extern long gru_get_gseg_statistics(unsigned long arg); -extern irqreturn_t gru_intr(int irq, void *dev_id); extern int gru_handle_user_call_os(unsigned long address); extern int gru_user_flush_tlb(unsigned long arg); extern int gru_user_unload_context(unsigned long arg); |