diff options
Diffstat (limited to 'drivers/mmc/core/mmc.c')
| -rw-r--r-- | drivers/mmc/core/mmc.c | 86 |
1 files changed, 85 insertions, 1 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 16006ef153fe..772d0d0a541b 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -302,6 +302,44 @@ static int mmc_read_ext_csd(struct mmc_card *card) } if (card->ext_csd.rev >= 4) { + /* + * Enhanced area feature support -- check whether the eMMC + * card has the Enhanced area enabled. If so, export enhanced + * area offset and size to user by adding sysfs interface. + */ + if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) && + (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) { + u8 hc_erase_grp_sz = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; + u8 hc_wp_grp_sz = + ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; + + card->ext_csd.enhanced_area_en = 1; + /* + * calculate the enhanced data area offset, in bytes + */ + card->ext_csd.enhanced_area_offset = + (ext_csd[139] << 24) + (ext_csd[138] << 16) + + (ext_csd[137] << 8) + ext_csd[136]; + if (mmc_card_blockaddr(card)) + card->ext_csd.enhanced_area_offset <<= 9; + /* + * calculate the enhanced data area size, in kilobytes + */ + card->ext_csd.enhanced_area_size = + (ext_csd[142] << 16) + (ext_csd[141] << 8) + + ext_csd[140]; + card->ext_csd.enhanced_area_size *= + (size_t)(hc_erase_grp_sz * hc_wp_grp_sz); + card->ext_csd.enhanced_area_size <<= 9; + } else { + /* + * If the enhanced area is not enabled, disable these + * device attributes. + */ + card->ext_csd.enhanced_area_offset = -EINVAL; + card->ext_csd.enhanced_area_size = -EINVAL; + } card->ext_csd.sec_trim_mult = ext_csd[EXT_CSD_SEC_TRIM_MULT]; card->ext_csd.sec_erase_mult = @@ -336,6 +374,9 @@ MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid); MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name); MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid); MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial); +MMC_DEV_ATTR(enhanced_area_offset, "%llu\n", + card->ext_csd.enhanced_area_offset); +MMC_DEV_ATTR(enhanced_area_size, "%u\n", card->ext_csd.enhanced_area_size); static struct attribute *mmc_std_attrs[] = { &dev_attr_cid.attr, @@ -349,6 +390,8 @@ static struct attribute *mmc_std_attrs[] = { &dev_attr_name.attr, &dev_attr_oemid.attr, &dev_attr_serial.attr, + &dev_attr_enhanced_area_offset.attr, + &dev_attr_enhanced_area_size.attr, NULL, }; @@ -378,6 +421,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, int err, ddr = 0; u32 cid[4]; unsigned int max_dtr; + u32 rocr; BUG_ON(!host); WARN_ON(!host->claimed); @@ -391,7 +435,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, mmc_go_idle(host); /* The extra bit indicates that we support high capacity */ - err = mmc_send_op_cond(host, ocr | (1 << 30), NULL); + err = mmc_send_op_cond(host, ocr | (1 << 30), &rocr); if (err) goto err; @@ -479,11 +523,51 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, err = mmc_read_ext_csd(card); if (err) goto free_card; + + /* If doing byte addressing, check if required to do sector + * addressing. Handle the case of <2GB cards needing sector + * addressing. See section 8.1 JEDEC Standard JED84-A441; + * ocr register has bit 30 set for sector addressing. + */ + if (!(mmc_card_blockaddr(card)) && (rocr & (1<<30))) + mmc_card_set_blockaddr(card); + /* Erase size depends on CSD and Extended CSD */ mmc_set_erase_size(card); } /* + * If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF + * bit. This bit will be lost every time after a reset or power off. + */ + if (card->ext_csd.enhanced_area_en) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_ERASE_GROUP_DEF, 1); + + if (err && err != -EBADMSG) + goto free_card; + + if (err) { + err = 0; + /* + * Just disable enhanced area off & sz + * will try to enable ERASE_GROUP_DEF + * during next time reinit + */ + card->ext_csd.enhanced_area_offset = -EINVAL; + card->ext_csd.enhanced_area_size = -EINVAL; + } else { + card->ext_csd.erase_group_def = 1; + /* + * enable ERASE_GRP_DEF successfully. + * This will affect the erase size, so + * here need to reset erase size + */ + mmc_set_erase_size(card); + } + } + + /* * Activate high speed (if supported) */ if ((card->ext_csd.hs_max_dtr != 0) && |