diff options
Diffstat (limited to 'drivers/mmc/host/mxc_mmc.c')
-rw-r--r-- | drivers/mmc/host/mxc_mmc.c | 1530 |
1 files changed, 1530 insertions, 0 deletions
diff --git a/drivers/mmc/host/mxc_mmc.c b/drivers/mmc/host/mxc_mmc.c new file mode 100644 index 000000000000..980dc98c9b5f --- /dev/null +++ b/drivers/mmc/host/mxc_mmc.c @@ -0,0 +1,1530 @@ +/* + * linux/drivers/mmc/host/mxc_mmc.c - Freescale MXC/i.MX MMC driver + * + * based on imxmmc.c + * Copyright (C) 2004 Sascha Hauer, Pengutronix <sascha@saschahauer.de> + * + * derived from pxamci.c by Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/* + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/*! + * @file mxc_mmc.c + * + * @brief Driver for the Freescale Semiconductor MXC SDHC modules. + * + * This driver code is based on imxmmc.c, by Sascha Hauer, + * Pengutronix <sascha@saschahauer.de>. This driver supports both Secure Digital + * Host Controller modules (SDHC1 and SDHC2) of MXC. SDHC is also referred as + * MMC/SD controller. This code is not tested for SD cards. + * + * @ingroup MMC_SD + */ + +/* + * Include Files + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/blkdev.h> +#include <linux/dma-mapping.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sd.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/clk.h> +#include <linux/regulator/consumer.h> + +#include <mach/dma.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/sizes.h> +#include <asm/mach-types.h> +#include <asm/mach/irq.h> +#include <mach/mmc.h> + +#include "mxc_mmc.h" + +#define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE)) + +/* + * This define is used to test the driver without using DMA + */ +#define MXC_MMC_DMA_ENABLE + +/*! + * Maxumum length of s/g list, only length of 1 is currently supported + */ +#define NR_SG 1 + +#ifdef CONFIG_MMC_DEBUG +static void dump_cmd(struct mmc_command *cmd) +{ + printk(KERN_INFO "%s: CMD: opcode: %d ", DRIVER_NAME, cmd->opcode); + printk(KERN_INFO "arg: 0x%08x ", cmd->arg); + printk(KERN_INFO "flags: 0x%08x\n", cmd->flags); +} + +static void dump_status(const char *func, int sts) +{ + unsigned int bitset; + printk(KERN_INFO "%s:status: ", func); + while (sts) { + /* Find the next bit set */ + bitset = sts & ~(sts - 1); + switch (bitset) { + case STATUS_CARD_INSERTION: + printk(KERN_INFO "CARD_INSERTION|"); + break; + case STATUS_CARD_REMOVAL: + printk(KERN_INFO "CARD_REMOVAL |"); + break; + case STATUS_YBUF_EMPTY: + printk(KERN_INFO "YBUF_EMPTY |"); + break; + case STATUS_XBUF_EMPTY: + printk(KERN_INFO "XBUF_EMPTY |"); + break; + case STATUS_YBUF_FULL: + printk(KERN_INFO "YBUF_FULL |"); + break; + case STATUS_XBUF_FULL: + printk(KERN_INFO "XBUF_FULL |"); + break; + case STATUS_BUF_UND_RUN: + printk(KERN_INFO "BUF_UND_RUN |"); + break; + case STATUS_BUF_OVFL: + printk(KERN_INFO "BUF_OVFL |"); + break; + case STATUS_READ_OP_DONE: + printk(KERN_INFO "READ_OP_DONE |"); + break; + case STATUS_WR_CRC_ERROR_CODE_MASK: + printk(KERN_INFO "WR_CRC_ERROR_CODE |"); + break; + case STATUS_READ_CRC_ERR: + printk(KERN_INFO "READ_CRC_ERR |"); + break; + case STATUS_WRITE_CRC_ERR: + printk(KERN_INFO "WRITE_CRC_ERR |"); + break; + case STATUS_SDIO_INT_ACTIVE: + printk(KERN_INFO "SDIO_INT_ACTIVE |"); + break; + case STATUS_END_CMD_RESP: + printk(KERN_INFO "END_CMD_RESP |"); + break; + case STATUS_WRITE_OP_DONE: + printk(KERN_INFO "WRITE_OP_DONE |"); + break; + case STATUS_CARD_BUS_CLK_RUN: + printk(KERN_INFO "CARD_BUS_CLK_RUN |"); + break; + case STATUS_BUF_READ_RDY: + printk(KERN_INFO "BUF_READ_RDY |"); + break; + case STATUS_BUF_WRITE_RDY: + printk(KERN_INFO "BUF_WRITE_RDY |"); + break; + case STATUS_RESP_CRC_ERR: + printk(KERN_INFO "RESP_CRC_ERR |"); + break; + case STATUS_TIME_OUT_RESP: + printk(KERN_INFO "TIME_OUT_RESP |"); + break; + case STATUS_TIME_OUT_READ: + printk(KERN_INFO "TIME_OUT_READ |"); + break; + default: + printk(KERN_INFO "Invalid Status Register value0x%x\n", + bitset); + break; + } + sts &= ~bitset; + } + printk(KERN_INFO "\n"); +} +#endif + +/*! + * This structure is a way for the low level driver to define their own + * \b mmc_host structure. This structure includes the core \b mmc_host + * structure that is provided by Linux MMC/SD Bus protocol driver as an + * element and has other elements that are specifically required by this + * low-level driver. + */ +struct mxcmci_host { + /*! + * The mmc structure holds all the information about the device + * structure, current SDHC io bus settings, the current OCR setting, + * devices attached to this host, and so on. + */ + struct mmc_host *mmc; + + /*! + * This variable is used for locking the host data structure from + * multiple access. + */ + spinlock_t lock; + + /*! + * Resource structure, which will maintain base addresses and IRQs. + */ + struct resource *res; + + /*! + * Base address of SDHC, used in readl and writel. + */ + void *base; + + /*! + * SDHC IRQ number. + */ + int irq; + + /*! + * Card Detect IRQ number. + */ + int detect_irq; + + /*! + * Clock id to hold ipg_perclk. + */ + struct clk *clk; + /*! + * MMC mode. + */ + int mode; + + /*! + * DMA channel number. + */ + int dma; + + /*! + * Pointer to hold MMC/SD request. + */ + struct mmc_request *req; + + /*! + * Pointer to hold MMC/SD command. + */ + struct mmc_command *cmd; + + /*! + * Pointer to hold MMC/SD data. + */ + struct mmc_data *data; + + /*! + * Holds the number of bytes to transfer using DMA. + */ + unsigned int dma_size; + + /*! + * Value to store in Command and Data Control Register + * - currently unused + */ + unsigned int cmdat; + + /*! + * Regulator + */ + struct regulator *regulator_mmc; + + /*! + * Current vdd settting + */ + int current_vdd; + + /*! + * Power mode - currently unused + */ + unsigned int power_mode; + + /*! + * DMA address for scatter-gather transfers + */ + dma_addr_t sg_dma; + + /*! + * Length of the scatter-gather list + */ + unsigned int dma_len; + + /*! + * Holds the direction of data transfer. + */ + unsigned int dma_dir; + + /*! + * Id for MMC block. + */ + unsigned int id; + + /*! + * Note whether this driver has been suspended. + */ + unsigned int mxc_mmc_suspend_flag; + + /*! + * sdio_irq enable/disable ref count + */ + int sdio_irq_cnt; + + /*! + * Platform specific data + */ + struct mxc_mmc_platform_data *plat_data; +}; + +extern void gpio_sdhc_active(int module); +extern void gpio_sdhc_inactive(int module); + +#ifdef MXC_MMC_DMA_ENABLE +static void mxcmci_dma_irq(void *devid, int error, unsigned int cnt); +#endif +static int mxcmci_data_done(struct mxcmci_host *host, unsigned int stat); + +/* Wait count to start the clock */ +#define CMD_WAIT_CNT 100 + +#define MAX_HOST 10 +static struct mmc_host *hosts[MAX_HOST]; + +void mxc_mmc_force_detect(int id) +{ + if (id < MAX_HOST) + mmc_detect_change(hosts[id], msecs_to_jiffies(100)); +} + +EXPORT_SYMBOL(mxc_mmc_force_detect); + +/*! + This function sets the SDHC register to stop the clock and waits for the + * clock stop indication. + */ +static void mxcmci_stop_clock(struct mxcmci_host *host, bool wait) +{ + int wait_cnt = 0; + while (1) { + __raw_writel(STR_STP_CLK_STOP_CLK, + host->base + MMC_STR_STP_CLK); + + if (!wait) + break; + + wait_cnt = CMD_WAIT_CNT; + while (wait_cnt--) { + if (!(__raw_readl(host->base + MMC_STATUS) & + STATUS_CARD_BUS_CLK_RUN)) + break; + } + + if (!(__raw_readl(host->base + MMC_STATUS) & + STATUS_CARD_BUS_CLK_RUN)) + break; + } +} + +/*! + * This function sets the SDHC register to start the clock and waits for the + * clock start indication. When the clock starts SDHC module starts processing + * the command in CMD Register with arguments in ARG Register. + * + * @param host Pointer to MMC/SD host structure + * @param wait Boolean value to indicate whether to wait for the clock to start or come out instantly + */ +static void mxcmci_start_clock(struct mxcmci_host *host, bool wait) +{ + int wait_cnt; + +#ifdef CONFIG_MMC_DEBUG + dump_status(__FUNCTION__, __raw_readl(host->base + MMC_STATUS)); +#endif + + while (1) { + __raw_writel(STR_STP_CLK_START_CLK, + host->base + MMC_STR_STP_CLK); + if (!wait) + break; + + wait_cnt = CMD_WAIT_CNT; + while (wait_cnt--) { + if (__raw_readl(host->base + MMC_STATUS) & + STATUS_CARD_BUS_CLK_RUN) { + break; + } + } + + if (__raw_readl(host->base + MMC_STATUS) & + STATUS_CARD_BUS_CLK_RUN) { + break; + } + } +#ifdef CONFIG_MMC_DEBUG + dump_status(__FUNCTION__, __raw_readl(host->base + MMC_STATUS)); +#endif + pr_debug("%s:CLK_RATE: 0x%08x\n", DRIVER_NAME, + __raw_readl(host->base + MMC_CLK_RATE)); +} + +/*! + * This function resets the SDHC host. + * + * @param host Pointer to MMC/SD host structure + */ +static void mxcmci_softreset(struct mxcmci_host *host) +{ + /* reset sequence */ + __raw_writel(0x8, host->base + MMC_STR_STP_CLK); + __raw_writel(0x9, host->base + MMC_STR_STP_CLK); + __raw_writel(0x1, host->base + MMC_STR_STP_CLK); + __raw_writel(0x1, host->base + MMC_STR_STP_CLK); + __raw_writel(0x1, host->base + MMC_STR_STP_CLK); + __raw_writel(0x1, host->base + MMC_STR_STP_CLK); + __raw_writel(0x1, host->base + MMC_STR_STP_CLK); + __raw_writel(0x1, host->base + MMC_STR_STP_CLK); + __raw_writel(0x1, host->base + MMC_STR_STP_CLK); + __raw_writel(0x1, host->base + MMC_STR_STP_CLK); + __raw_writel(0x3f, host->base + MMC_CLK_RATE); + + __raw_writel(0xff, host->base + MMC_RES_TO); + __raw_writel(512, host->base + MMC_BLK_LEN); + __raw_writel(1, host->base + MMC_NOB); +} + +/*! + * This function is called to setup SDHC register for data transfer. + * The function allocates DMA buffers, configures the DMA channel. + * Start the DMA channel to transfer data. When DMA is not enabled this + * function set ups only Number of Block and Block Length registers. + * + * @param host Pointer to MMC/SD host structure + * @param data Pointer to MMC/SD data structure + */ +static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) +{ + unsigned int nob = data->blocks; + + if (data->flags & MMC_DATA_STREAM) { + nob = 0xffff; + } + + host->data = data; + + __raw_writel(nob, host->base + MMC_NOB); + __raw_writel(data->blksz, host->base + MMC_BLK_LEN); + + host->dma_size = data->blocks * data->blksz; + pr_debug("%s:Request bytes to transfer:%d\n", DRIVER_NAME, + host->dma_size); + +#ifdef MXC_MMC_DMA_ENABLE + if (host->dma_size <= (16 << host->mmc->ios.bus_width)) { + return; + } + + if (data->blksz & 0x3) { + printk(KERN_ERR + "mxc_mci: block size not multiple of 4 bytes\n"); + } + + if (data->flags & MMC_DATA_READ) { + host->dma_dir = DMA_FROM_DEVICE; + } else { + host->dma_dir = DMA_TO_DEVICE; + } + host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + host->dma_dir); + + if (data->flags & MMC_DATA_READ) { + mxc_dma_sg_config(host->dma, data->sg, data->sg_len, + host->dma_size, MXC_DMA_MODE_READ); + } else { + mxc_dma_sg_config(host->dma, data->sg, data->sg_len, + host->dma_size, MXC_DMA_MODE_WRITE); + } +#endif +} + +/*! + * This function is called by \b mxcmci_request() function to setup the SDHC + * register to issue command. This function disables the card insertion and + * removal detection interrupt. + * + * @param host Pointer to MMC/SD host structure + * @param cmd Pointer to MMC/SD command structure + * @param cmdat Value to store in Command and Data Control Register + */ +static void mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd, + unsigned int cmdat) +{ + WARN_ON(host->cmd != NULL); + host->cmd = cmd; + + switch (RSP_TYPE(mmc_resp_type(cmd))) { + case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6 */ + cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R1; + break; + case RSP_TYPE(MMC_RSP_R3): + cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R3; + break; + case RSP_TYPE(MMC_RSP_R2): + cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R2; + break; + default: + /* No Response required */ + break; + } + + if (cmd->opcode == MMC_GO_IDLE_STATE) { + cmdat |= CMD_DAT_CONT_INIT; /* This command needs init */ + } + + if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) { + cmdat |= CMD_DAT_CONT_BUS_WIDTH_4; + } + + __raw_writel(cmd->opcode, host->base + MMC_CMD); + __raw_writel(cmd->arg, host->base + MMC_ARG); + + __raw_writel(cmdat, host->base + MMC_CMD_DAT_CONT); + + if (!(__raw_readl(host->base + MMC_STATUS) & STATUS_CARD_BUS_CLK_RUN)) + mxcmci_start_clock(host, true); +} + +/*! + * This function is called to complete the command request. + * This function enables insertion or removal interrupt. + * + * @param host Pointer to MMC/SD host structure + * @param req Pointer to MMC/SD command request structure + */ +static void mxcmci_finish_request(struct mxcmci_host *host, + struct mmc_request *req) +{ + + host->req = NULL; + host->cmd = NULL; + host->data = NULL; + + mmc_request_done(host->mmc, req); +} + +/*! + * This function is called when the requested command is completed. + * This function reads the response from the card and data if the command is for + * data transfer. This function checks for CRC error in response FIFO or + * data FIFO. + * + * @param host Pointer to MMC/SD host structure + * @param stat Content of SDHC Status Register + * + * @return This function returns 0 if there is no pending command, otherwise 1 + * always. + */ +static int mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat) +{ + struct mmc_command *cmd = host->cmd; + struct mmc_data *data = host->data; + int i; + u32 a, b, c; + u32 temp_data; + unsigned int status; + unsigned long *buf; + u8 *buf8; + int no_of_bytes; + int no_of_words; + + if (!cmd) { + /* There is no command for completion */ + return 0; + } + + /* As this function finishes the command, initialize cmd to NULL */ + host->cmd = NULL; + + /* check for Time out errors */ + if (stat & STATUS_TIME_OUT_RESP) { + __raw_writel(STATUS_TIME_OUT_RESP, host->base + MMC_STATUS); + pr_debug("%s: CMD %d TIMEOUT\n", DRIVER_NAME, cmd->opcode); + cmd->error = -ETIMEDOUT; + /* + * Reinitialized the controller to clear the unknown + * error state. + */ + mxcmci_softreset(host); + __raw_writel(READ_TO_VALUE, host->base + MMC_READ_TO); + __raw_writel(INT_CNTR_END_CMD_RES, host->base + MMC_INT_CNTR); + } else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) { + __raw_writel(STATUS_RESP_CRC_ERR, host->base + MMC_STATUS); + printk(KERN_ERR "%s: cmd %d CRC error\n", DRIVER_NAME, + cmd->opcode); + cmd->error = -EILSEQ; + /* + * Reinitialized the controller to clear the unknown + * error state. + */ + mxcmci_softreset(host); + __raw_writel(READ_TO_VALUE, host->base + MMC_READ_TO); + __raw_writel(INT_CNTR_END_CMD_RES, host->base + MMC_INT_CNTR); + } + + /* Read response from the card */ + switch (RSP_TYPE(mmc_resp_type(cmd))) { + case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6 */ + a = __raw_readl(host->base + MMC_RES_FIFO) & 0xffff; + b = __raw_readl(host->base + MMC_RES_FIFO) & 0xffff; + c = __raw_readl(host->base + MMC_RES_FIFO) & 0xffff; + cmd->resp[0] = a << 24 | b << 8 | c >> 8; + break; + case RSP_TYPE(MMC_RSP_R3): /* r3, r4 */ + a = __raw_readl(host->base + MMC_RES_FIFO) & 0xffff; + b = __raw_readl(host->base + MMC_RES_FIFO) & 0xffff; + c = __raw_readl(host->base + MMC_RES_FIFO) & 0xffff; + cmd->resp[0] = a << 24 | b << 8 | c >> 8; + break; + case RSP_TYPE(MMC_RSP_R2): + for (i = 0; i < 4; i++) { + a = __raw_readl(host->base + MMC_RES_FIFO) & 0xffff; + b = __raw_readl(host->base + MMC_RES_FIFO) & 0xffff; + cmd->resp[i] = a << 16 | b; + } + break; + default: + break; + } + + pr_debug("%s: 0x%08x, 0x%08x, 0x%08x, 0x%08x\n", DRIVER_NAME, + cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); + + if (!host->data || cmd->error) { + /* complete the command */ + mxcmci_finish_request(host, host->req); + return 1; + } + + /* The command has a data transfer */ +#ifdef MXC_MMC_DMA_ENABLE + /* Use DMA if transfer size is greater than fifo size */ + if (host->dma_size > (16 << host->mmc->ios.bus_width)) { + mxc_dma_enable(host->dma); + return 1; + } +#endif + /* Use PIO tranfer of data */ + buf = (unsigned long *)sg_virt(data->sg); + buf8 = (u8 *) buf; + + /* calculate the number of bytes requested for transfer */ + no_of_bytes = data->blocks * data->blksz; + no_of_words = (no_of_bytes + 3) / 4; + pr_debug("no_of_words=%d\n", no_of_words); + + if (data->flags & MMC_DATA_READ) { + for (i = 0; i < no_of_words; i++) { + /* wait for buffers to be ready for read */ + while (!(__raw_readl(host->base + MMC_STATUS) & + (STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE))) ; + + pr_debug("status is 0x%x\n", + __raw_readl(host->base + MMC_STATUS)); + /* read 32 bit data */ + temp_data = __raw_readl(host->base + MMC_BUFFER_ACCESS); + if (SD_APP_SEND_SCR == cmd->opcode) { + pr_debug("CMD51 read out 0x%x\n", temp_data); + if (temp_data == 0xFFFFFFFF) + temp_data = 0; + } + if (no_of_bytes >= 4) { + *buf++ = temp_data; + no_of_bytes -= 4; + } else { + do { + *buf8++ = temp_data; + temp_data = temp_data >> 8; + } while (--no_of_bytes); + } + } + + /* wait for read operation completion bit */ + while (!(__raw_readl(host->base + MMC_STATUS) & + STATUS_READ_OP_DONE)) ; + + /* check for time out and CRC errors */ + status = __raw_readl(host->base + MMC_STATUS); + if (status & STATUS_TIME_OUT_READ) { + printk(KERN_ERR "%s: Read time out occurred\n", + DRIVER_NAME); + data->error = -ETIMEDOUT; + __raw_writel(STATUS_TIME_OUT_READ, + host->base + MMC_STATUS); + /* + * Reinitialized the controller to clear the unknown + * error state. + */ + mxcmci_softreset(host); + __raw_writel(READ_TO_VALUE, host->base + MMC_READ_TO); + __raw_writel(INT_CNTR_END_CMD_RES, + host->base + MMC_INT_CNTR); + } else if (status & STATUS_READ_CRC_ERR) { + printk(KERN_ERR "%s: Read CRC error occurred\n", + DRIVER_NAME); + if (SD_APP_SEND_SCR != cmd->opcode) + data->error = -EILSEQ; + __raw_writel(STATUS_READ_CRC_ERR, + host->base + MMC_STATUS); + /* + * Reinitialized the controller to clear the unknown + * error state. + */ + mxcmci_softreset(host); + __raw_writel(READ_TO_VALUE, host->base + MMC_READ_TO); + __raw_writel(INT_CNTR_END_CMD_RES, + host->base + MMC_INT_CNTR); + } + __raw_writel(STATUS_READ_OP_DONE, host->base + MMC_STATUS); + + pr_debug("%s: Read %u words\n", DRIVER_NAME, i); + } else { + for (i = 0; i < no_of_words; i++) { + + /* wait for buffers to be ready for write */ + while (!(__raw_readl(host->base + MMC_STATUS) & + STATUS_BUF_WRITE_RDY)) ; + + /* write 32 bit data */ + __raw_writel(*buf++, host->base + MMC_BUFFER_ACCESS); + if (__raw_readl(host->base + MMC_STATUS) & + STATUS_WRITE_OP_DONE) { + break; + } + } + + /* wait for write operation completion bit */ + while (!(__raw_readl(host->base + MMC_STATUS) & + STATUS_WRITE_OP_DONE)) ; + + /* check for CRC errors */ + status = __raw_readl(host->base + MMC_STATUS); + if (status & STATUS_WRITE_CRC_ERR) { + printk(KERN_ERR "%s: Write CRC error occurred\n", + DRIVER_NAME); + data->error = -EILSEQ; + __raw_writel(STATUS_WRITE_CRC_ERR, + host->base + MMC_STATUS); + } + __raw_writel(STATUS_WRITE_OP_DONE, host->base + MMC_STATUS); + pr_debug("%s: Written %u words\n", DRIVER_NAME, i); + } + + /* complete the data transfer request */ + mxcmci_data_done(host, status); + + return 1; +} + +/*! + * This function is called when the data transfer is completed either by DMA + * or by core. This function is called to clean up the DMA buffer and to send + * STOP transmission command for commands to transfer data. This function + * completes request issued by the MMC/SD core driver. + * + * @param host pointer to MMC/SD host structure. + * @param stat content of SDHC Status Register + * + * @return This function returns 0 if no data transfer otherwise return 1 + * always. + */ +static int mxcmci_data_done(struct mxcmci_host *host, unsigned int stat) +{ + struct mmc_data *data = host->data; + + if (!data) { + return 0; + } +#ifdef MXC_MMC_DMA_ENABLE + if (host->dma_size > (16 << host->mmc->ios.bus_width)) { + dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len, + host->dma_dir); + } +#endif + if (__raw_readl(host->base + MMC_STATUS) & STATUS_ERR_MASK) { + printk(KERN_ERR "%s: request failed. status: 0x%08x\n", + DRIVER_NAME, __raw_readl(host->base + MMC_STATUS)); + } + + host->data = NULL; + data->bytes_xfered = host->dma_size; + + if (host->req->stop && !(data->error)) { + mxcmci_stop_clock(host, true); + mxcmci_start_cmd(host, host->req->stop, 0); + } else { + mxcmci_finish_request(host, host->req); + } + + return 1; +} + +/*! + * GPIO interrupt service routine registered to handle the SDHC interrupts. + * This interrupt routine handles card insertion and card removal interrupts. + * + * @param irq the interrupt number + * @param devid driver private data + * @param regs holds a snapshot of the processor's context before the + * processor entered the interrupt code + * + * @return The function returns \b IRQ_RETVAL(1) + */ +static irqreturn_t mxcmci_gpio_irq(int irq, void *devid) +{ + struct mxcmci_host *host = devid; + int card_gpio_status = host->plat_data->status(host->mmc->parent); + + pr_debug("%s: MMC%d status=%d %s\n", DRIVER_NAME, host->id, + card_gpio_status, card_gpio_status ? "removed" : "inserted"); + + if (card_gpio_status == host->plat_data->card_inserted_state) { + /* + * Reinitialized the controller to clear the unknown + * error state when a card is inserted. + */ + mxcmci_softreset(host); + __raw_writel(READ_TO_VALUE, host->base + MMC_READ_TO); + __raw_writel(INT_CNTR_END_CMD_RES, host->base + MMC_INT_CNTR); + + mmc_detect_change(host->mmc, msecs_to_jiffies(100)); + } else { + mxcmci_cmd_done(host, STATUS_TIME_OUT_RESP); + mmc_detect_change(host->mmc, msecs_to_jiffies(50)); + } + + do { + card_gpio_status = host->plat_data->status(host->mmc->parent); + if (card_gpio_status) { + set_irq_type(host->detect_irq, IRQF_TRIGGER_FALLING); + } else { + set_irq_type(host->detect_irq, IRQF_TRIGGER_RISING); + } + } while (card_gpio_status != + host->plat_data->status(host->mmc->parent)); + + return IRQ_HANDLED; +} + +/*! + * Interrupt service routine registered to handle the SDHC interrupts. + * This interrupt routine handles end of command, card insertion and + * card removal interrupts. If the interrupt is card insertion or removal then + * inform the MMC/SD core driver to detect the change in physical connections. + * If the command is END_CMD_RESP read the Response FIFO. If DMA is not enabled + * and data transfer is associated with the command then read or write the data + * from or to the BUFFER_ACCESS FIFO. + * + * @param irq the interrupt number + * @param devid driver private data + * @param regs holds a snapshot of the processor's context before the + * processor entered the interrupt code + * + * @return The function returns \b IRQ_RETVAL(1) if interrupt was handled, + * returns \b IRQ_RETVAL(0) if the interrupt was not handled. + */ +static irqreturn_t mxcmci_irq(int irq, void *devid) +{ + struct mxcmci_host *host = devid; + struct mmc_data *data = host->data; + unsigned int status = 0; + u32 intctrl; + + if (host->mxc_mmc_suspend_flag == 1) { + clk_enable(host->clk); + } + + status = __raw_readl(host->base + MMC_STATUS); + pr_debug("MXC MMC IRQ status is 0x%x.\n", status); +#ifdef CONFIG_MMC_DEBUG + dump_status(__FUNCTION__, status); +#endif + if (status & STATUS_END_CMD_RESP) { + __raw_writel(STATUS_END_CMD_RESP, host->base + MMC_STATUS); + mxcmci_cmd_done(host, status); + } +#ifdef MXC_MMC_DMA_ENABLE + /* + * If read length < fifo length, STATUS_END_CMD_RESP and + * STATUS_READ_OP_DONE may come together. In this case, it's using PIO + * mode, we ignore STATUS_READ_OP_DONE. + */ + if ((status & (STATUS_WRITE_OP_DONE | STATUS_READ_OP_DONE)) && + !(status & STATUS_END_CMD_RESP)) { + pr_debug(KERN_INFO "MXC MMC IO OP DONE INT.\n"); + intctrl = __raw_readl(host->base + MMC_INT_CNTR); + __raw_writel((~(INT_CNTR_WRITE_OP_DONE | INT_CNTR_READ_OP_DONE) + & intctrl), host->base + MMC_INT_CNTR); + + pr_debug("%s:READ/WRITE OPERATION DONE\n", DRIVER_NAME); + /* check for time out and CRC errors */ + status = __raw_readl(host->base + MMC_STATUS); + if (status & STATUS_READ_OP_DONE) { + if (status & STATUS_TIME_OUT_READ) { + pr_debug("%s: Read time out occurred\n", + DRIVER_NAME); + data->error = -ETIMEDOUT; + __raw_writel(STATUS_TIME_OUT_READ, + host->base + MMC_STATUS); + } else if (status & STATUS_READ_CRC_ERR) { + pr_debug("%s: Read CRC error occurred\n", + DRIVER_NAME); + data->error = -EILSEQ; + __raw_writel(STATUS_READ_CRC_ERR, + host->base + MMC_STATUS); + } + __raw_writel(STATUS_READ_OP_DONE, + host->base + MMC_STATUS); + } + + /* check for CRC errors */ + if (status & STATUS_WRITE_OP_DONE) { + if (status & STATUS_WRITE_CRC_ERR) { + printk(KERN_ERR + "%s: Write CRC error occurred\n", + DRIVER_NAME); + data->error = -EILSEQ; + __raw_writel(STATUS_WRITE_CRC_ERR, + host->base + MMC_STATUS); + } + __raw_writel(STATUS_WRITE_OP_DONE, + host->base + MMC_STATUS); + } + + mxcmci_data_done(host, status); + } +#endif + status = __raw_readl(host->base + MMC_STATUS); + intctrl = __raw_readl(host->base + MMC_INT_CNTR); + if ((status & STATUS_SDIO_INT_ACTIVE) + && (intctrl & INT_CNTR_SDIO_IRQ_EN)) { + __raw_writel(STATUS_SDIO_INT_ACTIVE, host->base + MMC_STATUS); + + /*Here we do not handle the sdio interrupt to client driver + if the host is in suspend state */ + if (host->mxc_mmc_suspend_flag == 0) { + mmc_signal_sdio_irq(host->mmc); + } + } + return IRQ_HANDLED; +} + +/*! + * This function is called by MMC/SD Bus Protocol driver to issue a MMC + * and SD commands to the SDHC. + * + * @param mmc Pointer to MMC/SD host structure + * @param req Pointer to MMC/SD command request structure + */ +static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req) +{ + struct mxcmci_host *host = mmc_priv(mmc); + /* Holds the value of Command and Data Control Register */ + unsigned long cmdat; + + WARN_ON(host->req != NULL); + + host->req = req; +#ifdef CONFIG_MMC_DEBUG + dump_cmd(req->cmd); + dump_status(__FUNCTION__, __raw_readl(host->base + MMC_STATUS)); +#endif + + cmdat = 0; + if (req->data) { + mxcmci_setup_data(host, req->data); + + cmdat |= CMD_DAT_CONT_DATA_ENABLE; + + if (req->data->flags & MMC_DATA_WRITE) { + cmdat |= CMD_DAT_CONT_WRITE; + } + if (req->data->flags & MMC_DATA_STREAM) { + printk(KERN_ERR + "MXC MMC does not support stream mode\n"); + } + } + mxcmci_start_cmd(host, req->cmd, cmdat); +} + +/*! + * This function is called by MMC/SD Bus Protocol driver to change the clock + * speed of MMC or SD card + * + * @param mmc Pointer to MMC/SD host structure + * @param ios Pointer to MMC/SD I/O type structure + */ +static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct mxcmci_host *host = mmc_priv(mmc); + /*This variable holds the value of clock prescaler */ + int prescaler; + int clk_rate = clk_get_rate(host->clk); + int voltage = 0; +#ifdef MXC_MMC_DMA_ENABLE + mxc_dma_device_t dev_id = 0; +#endif + + pr_debug("%s: clock %u, bus %lu, power %u, vdd %u\n", DRIVER_NAME, + ios->clock, 1UL << ios->bus_width, ios->power_mode, ios->vdd); + + host->dma_dir = DMA_NONE; + +#ifdef MXC_MMC_DMA_ENABLE + if (mmc->ios.bus_width != host->mode) { + mxc_dma_free(host->dma); + if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) { + if (host->id == 0) { + dev_id = MXC_DMA_MMC1_WIDTH_4; + } else { + dev_id = MXC_DMA_MMC2_WIDTH_4; + } + } else { + if (host->id == 0) { + dev_id = MXC_DMA_MMC1_WIDTH_1; + } else { + dev_id = MXC_DMA_MMC2_WIDTH_1; + } + } + host->dma = mxc_dma_request(dev_id, "MXC MMC"); + if (host->dma < 0) { + printk(KERN_ERR "Cannot allocate MMC DMA channel\n"); + } + host->mode = mmc->ios.bus_width; + mxc_dma_callback_set(host->dma, mxcmci_dma_irq, (void *)host); + } +#endif + + if ((ios->vdd != host->current_vdd) && host->regulator_mmc) { + if (ios->vdd == 7) + voltage = 1800000; + else if (ios->vdd >= 8) + voltage = 2000000 + (ios->vdd - 8) * 100000; + regulator_set_voltage(host->regulator_mmc, voltage, voltage); + } + host->current_vdd = ios->vdd; + + if (ios->power_mode != host->power_mode && host->regulator_mmc) { + if (ios->power_mode == MMC_POWER_UP) { + if (regulator_enable(host->regulator_mmc) == 0) { + pr_debug("mmc power on\n"); + msleep(1); + } + } else if (ios->power_mode == MMC_POWER_OFF) { + regulator_disable(host->regulator_mmc); + pr_debug("mmc power off\n"); + } + } + host->power_mode = ios->power_mode; + + /* + * Vary divider first, then prescaler. + **/ + if (ios->clock) { + unsigned int clk_dev = 0; + + /* + * when prescaler = 16, CLK_20M = CLK_DIV / 2 + */ + if (ios->clock == mmc->f_min) + prescaler = 16; + else + prescaler = 0; + + /* clk_dev =1, CLK_DIV = ipg_perclk/2 */ + while (prescaler <= 0x800) { + for (clk_dev = 1; clk_dev <= 0xF; clk_dev++) { + int x; + if (prescaler != 0) { + x = (clk_rate / (clk_dev + 1)) / + (prescaler * 2); + } else { + x = clk_rate / (clk_dev + 1); + } + + pr_debug("x=%d, clock=%d %d\n", x, ios->clock, + clk_dev); + if (x <= ios->clock) { + break; + } + } + if (clk_dev < 0x10) { + break; + } + if (prescaler == 0) + prescaler = 1; + else + prescaler <<= 1; + } + + pr_debug("prescaler = 0x%x, divider = 0x%x\n", prescaler, + clk_dev); + mxcmci_stop_clock(host, true); + __raw_writel((prescaler << 4) | clk_dev, + host->base + MMC_CLK_RATE); + mxcmci_start_clock(host, false); + } else { + mxcmci_stop_clock(host, true); + } +} + +static void mxcmci_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct mxcmci_host *host = mmc_priv(mmc); + u32 intctrl; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + if (enable) + host->sdio_irq_cnt++; + else + host->sdio_irq_cnt--; + + if (host->sdio_irq_cnt == 1 || host->sdio_irq_cnt == 0) { + intctrl = __raw_readl(host->base + MMC_INT_CNTR); + intctrl &= ~INT_CNTR_SDIO_IRQ_EN; + if (host->sdio_irq_cnt) + intctrl |= INT_CNTR_SDIO_IRQ_EN; + __raw_writel(intctrl, host->base + MMC_INT_CNTR); + } + + spin_unlock_irqrestore(&host->lock, flags); +} + +static int mxcmci_get_ro(struct mmc_host *mmc) +{ + struct mxcmci_host *host = mmc_priv(mmc); + + if (host->plat_data->wp_status) + return host->plat_data->wp_status(mmc->parent); + else + return 0; +} + +/*! + * MMC/SD host operations structure. + * These functions are registered with MMC/SD Bus protocol driver. + */ +static struct mmc_host_ops mxcmci_ops = { + .request = mxcmci_request, + .set_ios = mxcmci_set_ios, + .get_ro = mxcmci_get_ro, + .enable_sdio_irq = mxcmci_enable_sdio_irq, +}; + +#ifdef MXC_MMC_DMA_ENABLE +/*! + * This function is called by DMA Interrupt Service Routine to indicate + * requested DMA transfer is completed. + * + * @param devid pointer to device specific structure + * @param error any DMA error + * @param cnt amount of data that was transferred + */ +static void mxcmci_dma_irq(void *devid, int error, unsigned int cnt) +{ + struct mxcmci_host *host = devid; + u32 status; + ulong nob, blk_size, i, blk_len; + + mxc_dma_disable(host->dma); + + if (error) { + printk(KERN_ERR "Error in DMA transfer\n"); + status = __raw_readl(host->base + MMC_STATUS); +#ifdef CONFIG_MMC_DEBUG + dump_status(__FUNCTION__, status); +#endif + mxcmci_data_done(host, status); + return; + } + pr_debug("%s: Transfered bytes:%d\n", DRIVER_NAME, cnt); + nob = __raw_readl(host->base + MMC_REM_NOB); + blk_size = __raw_readl(host->base + MMC_REM_BLK_SIZE); + blk_len = __raw_readl(host->base + MMC_BLK_LEN); + pr_debug("%s: REM_NOB:%lu REM_BLK_SIZE:%lu\n", DRIVER_NAME, nob, + blk_size); + i = 0; + + /* Enable the WRITE OP Done INT */ + status = __raw_readl(host->base + MMC_INT_CNTR); + __raw_writel((INT_CNTR_READ_OP_DONE | INT_CNTR_WRITE_OP_DONE | status), + host->base + MMC_INT_CNTR); +} +#endif + +/*! + * This function is called during the driver binding process. Based on the SDHC + * module that is being probed this function adds the appropriate SDHC module + * structure in the core driver. + * + * @param pdev the device structure used to store device specific + * information that is used by the suspend, resume and remove + * functions. + * + * @return The function returns 0 on successful registration and initialization + * of SDHC module. Otherwise returns specific error code. + */ +static int mxcmci_probe(struct platform_device *pdev) +{ + struct mxc_mmc_platform_data *mmc_plat = pdev->dev.platform_data; + struct mmc_host *mmc; + struct mxcmci_host *host = NULL; + int card_gpio_status; + int ret = -ENODEV; + + if (!mmc_plat) { + return -EINVAL; + } + + mmc = mmc_alloc_host(sizeof(struct mxcmci_host), &pdev->dev); + if (!mmc) { + return -ENOMEM; + } + host = mmc_priv(mmc); + platform_set_drvdata(pdev, mmc); + + mmc->ops = &mxcmci_ops; + mmc->ocr_avail = mmc_plat->ocr_mask; + + /* Hack to work with LP1070 */ + if (mmc->ocr_avail && ~(MMC_VDD_31_32 - 1) == 0) + mmc->ocr_avail |= MMC_VDD_31_32; + + mmc->max_phys_segs = NR_SG; + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; + + mmc->f_min = mmc_plat->min_clk; + mmc->f_max = mmc_plat->max_clk; + mmc->max_req_size = 32 * 1024; + mmc->max_seg_size = mmc->max_req_size; + mmc->max_blk_count = 65536; + + spin_lock_init(&host->lock); + host->mmc = mmc; + host->dma = -1; + host->dma_dir = DMA_NONE; + host->id = pdev->id; + host->mxc_mmc_suspend_flag = 0; + host->mode = -1; + host->plat_data = mmc_plat; + if (!host->plat_data) { + ret = -EINVAL; + goto out0; + } + + /* Get pwr supply for SDHC */ + if (NULL != mmc_plat->power_mmc) { + host->regulator_mmc = + regulator_get(&pdev->dev, mmc_plat->power_mmc); + if (IS_ERR(host->regulator_mmc)) { + ret = PTR_ERR(host->regulator_mmc); + goto out1; + } + if (!regulator_is_enabled(host->regulator_mmc)) { + if (regulator_enable(host->regulator_mmc) == 0) { + pr_debug("mmc power on\n"); + msleep(1); + } + } + } + + gpio_sdhc_active(pdev->id); + + host->clk = clk_get(&pdev->dev, "sdhc_clk"); + pr_debug("SDHC:%d clock:%lu\n", pdev->id, clk_get_rate(host->clk)); + clk_enable(host->clk); + + host->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!host->res) { + ret = -ENOMEM; + goto out2; + } + + if (!request_mem_region(host->res->start, + host->res->end - + host->res->start + 1, pdev->name)) { + printk(KERN_ERR "request_mem_region failed\n"); + ret = -ENOMEM; + goto out2; + } + host->base = (void *)IO_ADDRESS(host->res->start); + if (!host->base) { + ret = -ENOMEM; + goto out3; + } + + host->irq = platform_get_irq(pdev, 0); + if (!host->irq) { + ret = -ENOMEM; + goto out3; + } + + if (!host->plat_data->card_fixed) { + host->detect_irq = platform_get_irq(pdev, 1); + if (!host->detect_irq) + goto out3; + + do { + card_gpio_status = + host->plat_data->status(host->mmc->parent); + if (card_gpio_status) + set_irq_type(host->detect_irq, + IRQF_TRIGGER_FALLING); + else + set_irq_type(host->detect_irq, + IRQF_TRIGGER_RISING); + + } while (card_gpio_status != + host->plat_data->status(host->mmc->parent)); + + ret = request_irq(host->detect_irq, mxcmci_gpio_irq, 0, + pdev->name, host); + if (ret) + goto out3; + } + + mxcmci_softreset(host); + + if (__raw_readl(host->base + MMC_REV_NO) != SDHC_REV_NO) { + printk(KERN_ERR "%s: wrong rev.no. 0x%08x. aborting.\n", + pdev->name, MMC_REV_NO); + goto out3; + } + __raw_writel(READ_TO_VALUE, host->base + MMC_READ_TO); + + __raw_writel(INT_CNTR_END_CMD_RES, host->base + MMC_INT_CNTR); + + ret = request_irq(host->irq, mxcmci_irq, 0, pdev->name, host); + if (ret) { + goto out4; + } + + if ((ret = mmc_add_host(mmc)) < 0) { + goto out5; + } + + printk(KERN_INFO "%s-%d found\n", pdev->name, pdev->id); + if (host->id < MAX_HOST) + hosts[host->id] = host->mmc; + + return 0; + + out5: + free_irq(host->irq, host); + out4: + free_irq(host->detect_irq, host); + out3: + release_mem_region(pdev->resource[0].start, + pdev->resource[0].end - pdev->resource[0].start + 1); + out2: + clk_disable(host->clk); + regulator_disable(host->regulator_mmc); + regulator_put(host->regulator_mmc); + out1: + gpio_sdhc_inactive(pdev->id); + out0: + mmc_free_host(mmc); + platform_set_drvdata(pdev, NULL); + return ret; +} + +/*! + * Dissociates the driver from the SDHC device. Removes the appropriate SDHC + * module structure from the core driver. + * + * @param pdev the device structure used to give information on which SDHC + * to remove + * + * @return The function always returns 0. + */ +static int mxcmci_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + + if (mmc) { + struct mxcmci_host *host = mmc_priv(mmc); + + hosts[host->id] = NULL; + mmc_remove_host(mmc); + free_irq(host->irq, host); + free_irq(host->detect_irq, host); +#ifdef MXC_MMC_DMA_ENABLE + mxc_dma_free(host->dma); +#endif + release_mem_region(host->res->start, + host->res->end - host->res->start + 1); + mmc_free_host(mmc); + if (NULL != host->regulator_mmc) + regulator_put(host->regulator_mmc); + gpio_sdhc_inactive(pdev->id); + } + platform_set_drvdata(pdev, NULL); + return 0; +} + +#ifdef CONFIG_PM + +/*! + * This function is called to put the SDHC in a low power state. Refer to the + * document driver-model/driver.txt in the kernel source tree for more + * information. + * + * @param pdev the device structure used to give information on which SDHC + * to suspend + * @param state the power state the device is entering + * + * @return The function always returns 0. + */ +static int mxcmci_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct mxcmci_host *host = mmc_priv(mmc); + int ret = 0; + + if (mmc) { + host->mxc_mmc_suspend_flag = 1; + ret = mmc_suspend_host(mmc, state); + } + + clk_disable(host->clk); + /* + * The CD INT should be disabled in the suspend + * and enabled in resumed. + * Otherwise, the system would be halt when wake + * up with the situation that there is a card + * insertion during the system is in suspend mode. + */ + disable_irq(host->detect_irq); + + gpio_sdhc_inactive(pdev->id); + + if (host->regulator_mmc) + regulator_disable(host->regulator_mmc); + + return ret; +} + +/*! + * This function is called to bring the SDHC back from a low power state. Refer + * to the document driver-model/driver.txt in the kernel source tree for more + * information. + * + * @param pdev the device structure used to give information on which SDHC + * to resume + * + * @return The function always returns 0. + */ +static int mxcmci_resume(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct mxcmci_host *host = mmc_priv(mmc); + int ret = 0; + + /* + * Note that a card insertion interrupt will cause this + * driver to resume automatically. In that case we won't + * actually have to do any work here. Return success. + */ + if (!host->mxc_mmc_suspend_flag) { + return 0; + } + + /* enable pwr supply for SDHC */ + if (host->regulator_mmc && !regulator_is_enabled(host->regulator_mmc)) { + regulator_enable(host->regulator_mmc); + msleep(1); + } + + gpio_sdhc_active(pdev->id); + + clk_enable(host->clk); + + if (mmc) { + ret = mmc_resume_host(mmc); + host->mxc_mmc_suspend_flag = 0; + } + + enable_irq(host->detect_irq); + + return ret; +} +#else +#define mxcmci_suspend NULL +#define mxcmci_resume NULL +#endif /* CONFIG_PM */ + +/*! + * This structure contains pointers to the power management callback functions. + */ +static struct platform_driver mxcmci_driver = { + .driver = { + .name = "mxcmci", + }, + .probe = mxcmci_probe, + .remove = mxcmci_remove, + .suspend = mxcmci_suspend, + .resume = mxcmci_resume, +}; + +/*! + * This function is used to initialize the MMC/SD driver module. The function + * registers the power management callback functions with the kernel and also + * registers the MMC/SD callback functions with the core MMC/SD driver. + * + * @return The function returns 0 on success and a non-zero value on failure. + */ +static int __init mxcmci_init(void) +{ + printk(KERN_INFO "MXC MMC/SD driver\n"); + return platform_driver_register(&mxcmci_driver); +} + +/*! + * This function is used to cleanup all resources before the driver exits. + */ +static void __exit mxcmci_exit(void) +{ + platform_driver_unregister(&mxcmci_driver); +} + +module_init(mxcmci_init); +module_exit(mxcmci_exit); + +MODULE_DESCRIPTION("MXC Multimedia Card Interface Driver"); +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_LICENSE("GPL"); |