diff options
Diffstat (limited to 'drivers/mmc/host/mxc_mmc.h')
| -rw-r--r-- | drivers/mmc/host/mxc_mmc.h | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/drivers/mmc/host/mxc_mmc.h b/drivers/mmc/host/mxc_mmc.h new file mode 100644 index 000000000000..3ad45377dde6 --- /dev/null +++ b/drivers/mmc/host/mxc_mmc.h @@ -0,0 +1,126 @@ +/* + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __MXC_MMC_REG_H__ +#define __MXC_MMC_REG_H__ + +#include <mach/hardware.h> + +/*! + * @defgroup MMC_SD MMC/SD Driver + */ + +/*! + * @file mxc_mmc.h + * + * @brief Driver for the Freescale Semiconductor MXC SDHC modules. + * + * This file defines offsets and bits of SDHC registers. SDHC is also referred as + * MMC/SD controller + * + * @ingroup MMC_SD + */ + +/*! + * Number of SDHC modules + */ + +#define SDHC_MMC_WML 16 +#define SDHC_SD_WML 64 +#define DRIVER_NAME "MXCMMC" +#define SDHC_MEM_SIZE 16384 +#define SDHC_REV_NO 0x400 +#define READ_TO_VALUE 0x2db4 + +/* Address offsets of the SDHC registers */ +#define MMC_STR_STP_CLK 0x00 /* Clock Control Reg */ +#define MMC_STATUS 0x04 /* Status Reg */ +#define MMC_CLK_RATE 0x08 /* Clock Rate Reg */ +#define MMC_CMD_DAT_CONT 0x0C /* Command and Data Control Reg */ +#define MMC_RES_TO 0x10 /* Response Time-out Reg */ +#define MMC_READ_TO 0x14 /* Read Time-out Reg */ +#define MMC_BLK_LEN 0x18 /* Block Length Reg */ +#define MMC_NOB 0x1C /* Number of Blocks Reg */ +#define MMC_REV_NO 0x20 /* Revision Number Reg */ +#define MMC_INT_CNTR 0x24 /* Interrupt Control Reg */ +#define MMC_CMD 0x28 /* Command Number Reg */ +#define MMC_ARG 0x2C /* Command Argument Reg */ +#define MMC_RES_FIFO 0x34 /* Command Response Reg */ +#define MMC_BUFFER_ACCESS 0x38 /* Data Buffer Access Reg */ +#define MMC_REM_NOB 0x40 /* Remaining NOB Reg */ +#define MMC_REM_BLK_SIZE 0x44 /* Remaining Block Size Reg */ + +/* Bit definitions for STR_STP_CLK */ +#define STR_STP_CLK_RESET (1<<3) +#define STR_STP_CLK_START_CLK (1<<1) +#define STR_STP_CLK_STOP_CLK (1<<0) + +/* Bit definitions for STATUS */ +#define STATUS_CARD_INSERTION (1<<31) +#define STATUS_CARD_REMOVAL (1<<30) +#define STATUS_YBUF_EMPTY (1<<29) +#define STATUS_XBUF_EMPTY (1<<28) +#define STATUS_YBUF_FULL (1<<27) +#define STATUS_XBUF_FULL (1<<26) +#define STATUS_BUF_UND_RUN (1<<25) +#define STATUS_BUF_OVFL (1<<24) +#define STATUS_SDIO_INT_ACTIVE (1<<14) +#define STATUS_END_CMD_RESP (1<<13) +#define STATUS_WRITE_OP_DONE (1<<12) +#define STATUS_READ_OP_DONE (1<<11) +#define STATUS_WR_CRC_ERROR_CODE_MASK (3<<9) +#define STATUS_CARD_BUS_CLK_RUN (1<<8) +#define STATUS_BUF_READ_RDY (1<<7) +#define STATUS_BUF_WRITE_RDY (1<<6) +#define STATUS_RESP_CRC_ERR (1<<5) +#define STATUS_READ_CRC_ERR (1<<3) +#define STATUS_WRITE_CRC_ERR (1<<2) +#define STATUS_TIME_OUT_RESP (1<<1) +#define STATUS_TIME_OUT_READ (1<<0) +#define STATUS_ERR_MASK 0x3f + +/* Clock rate definitions */ +#define CLK_RATE_PRESCALER(x) ((x) & 0xF) +#define CLK_RATE_CLK_DIVIDER(x) (((x) & 0xF) << 4) + +/* Bit definitions for CMD_DAT_CONT */ +#define CMD_DAT_CONT_CMD_RESP_LONG_OFF (1<<12) +#define CMD_DAT_CONT_STOP_READWAIT (1<<11) +#define CMD_DAT_CONT_START_READWAIT (1<<10) +#define CMD_DAT_CONT_BUS_WIDTH_1 (0<<8) +#define CMD_DAT_CONT_BUS_WIDTH_4 (2<<8) +#define CMD_DAT_CONT_INIT (1<<7) +#define CMD_DAT_CONT_WRITE (1<<4) +#define CMD_DAT_CONT_DATA_ENABLE (1<<3) +#define CMD_DAT_CONT_RESPONSE_FORMAT_R1 (1) +#define CMD_DAT_CONT_RESPONSE_FORMAT_R2 (2) +#define CMD_DAT_CONT_RESPONSE_FORMAT_R3 (3) +#define CMD_DAT_CONT_RESPONSE_FORMAT_R4 (4) +#define CMD_DAT_CONT_RESPONSE_FORMAT_R5 (5) +#define CMD_DAT_CONT_RESPONSE_FORMAT_R6 (6) + +/* Bit definitions for INT_CNTR */ +#define INT_CNTR_SDIO_INT_WKP_EN (1<<18) +#define INT_CNTR_CARD_INSERTION_WKP_EN (1<<17) +#define INT_CNTR_CARD_REMOVAL_WKP_EN (1<<16) +#define INT_CNTR_CARD_INSERTION_EN (1<<15) +#define INT_CNTR_CARD_REMOVAL_EN (1<<14) +#define INT_CNTR_SDIO_IRQ_EN (1<<13) +#define INT_CNTR_DAT0_EN (1<<12) +#define INT_CNTR_BUF_READ_EN (1<<4) +#define INT_CNTR_BUF_WRITE_EN (1<<3) +#define INT_CNTR_END_CMD_RES (1<<2) +#define INT_CNTR_WRITE_OP_DONE (1<<1) +#define INT_CNTR_READ_OP_DONE (1<<0) + +#endif /* __MXC_MMC_REG_H__ */ |