summaryrefslogtreecommitdiff
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/au1xmmc.c6
-rw-r--r--drivers/mmc/imxmmc.c24
-rw-r--r--drivers/mmc/mmc.c1
-rw-r--r--drivers/mmc/mmc_block.c1
-rw-r--r--drivers/mmc/pxamci.c4
-rw-r--r--drivers/mmc/wbsd.c8
6 files changed, 25 insertions, 19 deletions
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
index 914d62b24064..5dc4bee7abeb 100644
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -310,7 +310,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
}
else
data->bytes_xfered =
- (data->blocks * (1 << data->blksz_bits)) -
+ (data->blocks * data->blksz) -
host->pio.len;
}
@@ -575,7 +575,7 @@ static int
au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
{
- int datalen = data->blocks * (1 << data->blksz_bits);
+ int datalen = data->blocks * data->blksz;
if (dma != 0)
host->flags |= HOST_F_DMA;
@@ -596,7 +596,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
if (host->dma.len == 0)
return MMC_ERR_TIMEOUT;
- au_writel((1 << data->blksz_bits) - 1, HOST_BLKSIZE(host));
+ au_writel(data->blksz - 1, HOST_BLKSIZE(host));
if (host->flags & HOST_F_DMA) {
int i;
diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c
index 79358e223f57..a4eb1d0e7a71 100644
--- a/drivers/mmc/imxmmc.c
+++ b/drivers/mmc/imxmmc.c
@@ -218,8 +218,10 @@ static int imxmci_busy_wait_for_status(struct imxmci_host *host,
if(!loops)
return 0;
- dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
- loops, where, *pstat, stat_mask);
+ /* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */
+ if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000))
+ dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
+ loops, where, *pstat, stat_mask);
return loops;
}
@@ -333,6 +335,9 @@ static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd,
WARN_ON(host->cmd != NULL);
host->cmd = cmd;
+ /* Ensure, that clock are stopped else command programming and start fails */
+ imxmci_stop_clock(host);
+
if (cmd->flags & MMC_RSP_BUSY)
cmdat |= CMD_DAT_CONT_BUSY;
@@ -553,7 +558,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
int trans_done = 0;
unsigned int stat = *pstat;
- if(host->actual_bus_width == MMC_BUS_WIDTH_4)
+ if(host->actual_bus_width != MMC_BUS_WIDTH_4)
burst_len = 16;
else
burst_len = 64;
@@ -591,8 +596,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
stat = MMC_STATUS;
/* Flush extra bytes from FIFO */
- while(flush_len >= 2){
- flush_len -= 2;
+ while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){
i = MMC_BUFFER_ACCESS;
stat = MMC_STATUS;
stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
@@ -746,10 +750,6 @@ static void imxmci_tasklet_fnc(unsigned long data)
data_dir_mask = STATUS_DATA_TRANS_DONE;
}
- imxmci_busy_wait_for_status(host, &stat,
- data_dir_mask,
- 50, "imxmci_tasklet_fnc data");
-
if(stat & data_dir_mask) {
clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);
imxmci_data_done(host, stat);
@@ -865,7 +865,11 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
imxmci_stop_clock(host);
MMC_CLK_RATE = (prescaler<<3) | clk;
- imxmci_start_clock(host);
+ /*
+ * Under my understanding, clock should not be started there, because it would
+ * initiate SDHC sequencer and send last or random command into card
+ */
+ /*imxmci_start_clock(host);*/
dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE);
} else {
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 1ca2c8b9c9b5..6201f3086a02 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -951,6 +951,7 @@ static void mmc_read_scrs(struct mmc_host *host)
data.timeout_ns = card->csd.tacc_ns * 10;
data.timeout_clks = card->csd.tacc_clks * 10;
data.blksz_bits = 3;
+ data.blksz = 1 << 3;
data.blocks = 1;
data.flags = MMC_DATA_READ;
data.sg = &sg;
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index 06bd1f4cb9b1..e39cc05c64c2 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -175,6 +175,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.data.timeout_ns = card->csd.tacc_ns * 10;
brq.data.timeout_clks = card->csd.tacc_clks * 10;
brq.data.blksz_bits = md->block_bits;
+ brq.data.blksz = 1 << md->block_bits;
brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
brq.stop.opcode = MMC_STOP_TRANSMISSION;
brq.stop.arg = 0;
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
index f97b472085cb..b49368fd96b8 100644
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -119,7 +119,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
nob = 0xffff;
writel(nob, host->base + MMC_NOB);
- writel(1 << data->blksz_bits, host->base + MMC_BLKLEN);
+ writel(data->blksz, host->base + MMC_BLKLEN);
clks = (unsigned long long)data->timeout_ns * CLOCKRATE;
do_div(clks, 1000000000UL);
@@ -283,7 +283,7 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
* data blocks as being in error.
*/
if (data->error == MMC_ERR_NONE)
- data->bytes_xfered = data->blocks << data->blksz_bits;
+ data->bytes_xfered = data->blocks * data->blksz;
else
data->bytes_xfered = 0;
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 39b3d97f891e..8167332d4013 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -662,14 +662,14 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
unsigned long dmaflags;
DBGF("blksz %04x blks %04x flags %08x\n",
- 1 << data->blksz_bits, data->blocks, data->flags);
+ data->blksz, data->blocks, data->flags);
DBGF("tsac %d ms nsac %d clk\n",
data->timeout_ns / 1000000, data->timeout_clks);
/*
* Calculate size.
*/
- host->size = data->blocks << data->blksz_bits;
+ host->size = data->blocks * data->blksz;
/*
* Check timeout values for overflow.
@@ -696,12 +696,12 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
* Two bytes are needed for each data line.
*/
if (host->bus_width == MMC_BUS_WIDTH_1) {
- blksize = (1 << data->blksz_bits) + 2;
+ blksize = data->blksz + 2;
wbsd_write_index(host, WBSD_IDX_PBSMSB, (blksize >> 4) & 0xF0);
wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF);
} else if (host->bus_width == MMC_BUS_WIDTH_4) {
- blksize = (1 << data->blksz_bits) + 2 * 4;
+ blksize = data->blksz + 2 * 4;
wbsd_write_index(host, WBSD_IDX_PBSMSB,
((blksize >> 4) & 0xF0) | WBSD_DATA_WIDTH);