summaryrefslogtreecommitdiff
path: root/drivers/mtd/devices/docg3.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/devices/docg3.h')
-rw-r--r--drivers/mtd/devices/docg3.h65
1 files changed, 61 insertions, 4 deletions
diff --git a/drivers/mtd/devices/docg3.h b/drivers/mtd/devices/docg3.h
index 0d407be24594..db0da436b493 100644
--- a/drivers/mtd/devices/docg3.h
+++ b/drivers/mtd/devices/docg3.h
@@ -51,10 +51,19 @@
#define DOC_LAYOUT_WEAR_OFFSET (DOC_LAYOUT_PAGE_OOB_SIZE * 2)
#define DOC_LAYOUT_BLOCK_SIZE \
(DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)
+
+/*
+ * ECC related constants
+ */
+#define DOC_ECC_BCH_M 14
+#define DOC_ECC_BCH_T 4
+#define DOC_ECC_BCH_PRIMPOLY 0x4443
#define DOC_ECC_BCH_SIZE 7
#define DOC_ECC_BCH_COVERED_BYTES \
(DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ + \
- DOC_LAYOUT_OOB_HAMMING_SZ + DOC_LAYOUT_OOB_BCH_SZ)
+ DOC_LAYOUT_OOB_HAMMING_SZ)
+#define DOC_ECC_BCH_TOTAL_BYTES \
+ (DOC_ECC_BCH_COVERED_BYTES + DOC_LAYOUT_OOB_BCH_SZ)
/*
* Blocks distribution
@@ -80,6 +89,7 @@
#define DOC_CHIPID_G3 0x200
#define DOC_ERASE_MARK 0xaa
+#define DOC_MAX_NBFLOORS 4
/*
* Flash registers
*/
@@ -105,9 +115,11 @@
#define DOC_ECCCONF1 0x1042
#define DOC_ECCPRESET 0x1044
#define DOC_HAMMINGPARITY 0x1046
-#define DOC_BCH_SYNDROM(idx) (0x1048 + (idx << 1))
+#define DOC_BCH_HW_ECC(idx) (0x1048 + idx)
#define DOC_PROTECTION 0x1056
+#define DOC_DPS0_KEY 0x105c
+#define DOC_DPS1_KEY 0x105e
#define DOC_DPS0_ADDRLOW 0x1060
#define DOC_DPS0_ADDRHIGH 0x1062
#define DOC_DPS1_ADDRLOW 0x1064
@@ -117,6 +129,7 @@
#define DOC_ASICMODECONFIRM 0x1072
#define DOC_CHIPID_INV 0x1074
+#define DOC_POWERMODE 0x107c
/*
* Flash sequences
@@ -124,11 +137,14 @@
*/
#define DOC_SEQ_RESET 0x00
#define DOC_SEQ_PAGE_SIZE_532 0x03
-#define DOC_SEQ_SET_MODE 0x09
+#define DOC_SEQ_SET_FASTMODE 0x05
+#define DOC_SEQ_SET_RELIABLEMODE 0x09
#define DOC_SEQ_READ 0x12
#define DOC_SEQ_SET_PLANE1 0x0e
#define DOC_SEQ_SET_PLANE2 0x10
#define DOC_SEQ_PAGE_SETUP 0x1d
+#define DOC_SEQ_ERASE 0x27
+#define DOC_SEQ_PLANES_STATUS 0x31
/*
* Flash commands
@@ -143,7 +159,10 @@
#define DOC_CMD_PROG_BLOCK_ADDR 0x60
#define DOC_CMD_PROG_CYCLE1 0x80
#define DOC_CMD_PROG_CYCLE2 0x10
+#define DOC_CMD_PROG_CYCLE3 0x11
#define DOC_CMD_ERASECYCLE2 0xd0
+#define DOC_CMD_READ_STATUS 0x70
+#define DOC_CMD_PLANES_STATUS 0x71
#define DOC_CMD_RELIABLE_MODE 0x22
#define DOC_CMD_FAST_MODE 0xa2
@@ -174,6 +193,7 @@
/*
* Flash register : DOC_ECCCONF0
*/
+#define DOC_ECCCONF0_WRITE_MODE 0x0000
#define DOC_ECCCONF0_READ_MODE 0x8000
#define DOC_ECCCONF0_AUTO_ECC_ENABLE 0x4000
#define DOC_ECCCONF0_HAMMING_ENABLE 0x1000
@@ -185,7 +205,7 @@
*/
#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80
#define DOC_ECCCONF1_UNKOWN1 0x40
-#define DOC_ECCCONF1_UNKOWN2 0x20
+#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20
#define DOC_ECCCONF1_UNKOWN3 0x10
#define DOC_ECCCONF1_HAMMING_BITS_MASK 0x0f
@@ -223,13 +243,46 @@
#define DOC_READADDR_ONE_BYTE 0x4000
#define DOC_READADDR_ADDR_MASK 0x1fff
+/*
+ * Flash register : DOC_POWERMODE
+ */
+#define DOC_POWERDOWN_READY 0x80
+
+/*
+ * Status of erase and write operation
+ */
+#define DOC_PLANES_STATUS_FAIL 0x01
+#define DOC_PLANES_STATUS_PLANE0_KO 0x02
+#define DOC_PLANES_STATUS_PLANE1_KO 0x04
+
+/*
+ * DPS key management
+ *
+ * Each floor of docg3 has 2 protection areas: DPS0 and DPS1. These areas span
+ * across block boundaries, and define whether these blocks can be read or
+ * written.
+ * The definition is dynamically stored in page 0 of blocks (2,3) for DPS0, and
+ * page 0 of blocks (4,5) for DPS1.
+ */
+#define DOC_LAYOUT_DPS_KEY_LENGTH 8
+
/**
* struct docg3 - DiskOnChip driver private data
* @dev: the device currently under control
* @base: mapped IO space
* @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)
* @if_cfg: if true, reads are on 16bits, else reads are on 8bits
+
+ * @reliable: if 0, docg3 in normal mode, if 1 docg3 in fast mode, if 2 in
+ * reliable mode
+ * Fast mode implies more errors than normal mode.
+ * Reliable mode implies that page 2*n and 2*n+1 are clones.
* @bbt: bad block table cache
+ * @oob_write_ofs: offset of the MTD where this OOB should belong (ie. in next
+ * page_write)
+ * @oob_autoecc: if 1, use only bytes 0-7, 15, and fill the others with HW ECC
+ * if 0, use all the 16 bytes.
+ * @oob_write_buf: prepared OOB for next page_write
* @debugfs_root: debugfs root node
*/
struct docg3 {
@@ -237,8 +290,12 @@ struct docg3 {
void __iomem *base;
unsigned int device_id:4;
unsigned int if_cfg:1;
+ unsigned int reliable:2;
int max_block;
u8 *bbt;
+ loff_t oob_write_ofs;
+ int oob_autoecc;
+ u8 oob_write_buf[DOC_LAYOUT_OOB_SIZE];
struct dentry *debugfs_root;
};