diff options
Diffstat (limited to 'drivers/mtd/nand/h1910.c')
| -rw-r--r-- | drivers/mtd/nand/h1910.c | 208 |
1 files changed, 208 insertions, 0 deletions
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c new file mode 100644 index 000000000000..3825a7a0900c --- /dev/null +++ b/drivers/mtd/nand/h1910.c @@ -0,0 +1,208 @@ +/* + * drivers/mtd/nand/h1910.c + * + * Copyright (C) 2003 Joshua Wise (joshua@joshuawise.com) + * + * Derived from drivers/mtd/nand/edb7312.c + * Copyright (C) 2002 Marius Gröger (mag@sysgo.de) + * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de) + * + * $Id: h1910.c,v 1.5 2004/11/04 12:53:10 gleixner Exp $ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Overview: + * This is a device driver for the NAND flash device found on the + * iPAQ h1910 board which utilizes the Samsung K9F2808 part. This is + * a 128Mibit (16MiB x 8 bits) NAND flash device. + */ + +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> /* for CLPS7111_VIRT_BASE */ +#include <asm/sizes.h> +#include <asm/arch/h1900-gpio.h> +#include <asm/arch/ipaq.h> + +/* + * MTD structure for EDB7312 board + */ +static struct mtd_info *h1910_nand_mtd = NULL; + +/* + * Module stuff + */ + +#ifdef CONFIG_MTD_PARTITIONS +/* + * Define static partitions for flash device + */ +static struct mtd_partition partition_info[] = { + { name: "h1910 NAND Flash", + offset: 0, + size: 16*1024*1024 } +}; +#define NUM_PARTITIONS 1 + +#endif + + +/* + * hardware specific access to control-lines + */ +static void h1910_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct nand_chip* this = (struct nand_chip *) (mtd->priv); + + switch(cmd) { + + case NAND_CTL_SETCLE: + this->IO_ADDR_R |= (1 << 2); + this->IO_ADDR_W |= (1 << 2); + break; + case NAND_CTL_CLRCLE: + this->IO_ADDR_R &= ~(1 << 2); + this->IO_ADDR_W &= ~(1 << 2); + break; + + case NAND_CTL_SETALE: + this->IO_ADDR_R |= (1 << 3); + this->IO_ADDR_W |= (1 << 3); + break; + case NAND_CTL_CLRALE: + this->IO_ADDR_R &= ~(1 << 3); + this->IO_ADDR_W &= ~(1 << 3); + break; + + case NAND_CTL_SETNCE: + break; + case NAND_CTL_CLRNCE: + break; + } +} + +/* + * read device ready pin + */ +#if 0 +static int h1910_device_ready(struct mtd_info *mtd) +{ + return (GPLR(55) & GPIO_bit(55)); +} +#endif + +/* + * Main initialization routine + */ +static int __init h1910_init (void) +{ + struct nand_chip *this; + const char *part_type = 0; + int mtd_parts_nb = 0; + struct mtd_partition *mtd_parts = 0; + void __iomem *nandaddr; + + if (!machine_is_h1900()) + return -ENODEV; + + nandaddr = __ioremap(0x08000000, 0x1000, 0, 1); + if (!nandaddr) { + printk("Failed to ioremap nand flash.\n"); + return -ENOMEM; + } + + /* Allocate memory for MTD device structure and private data */ + h1910_nand_mtd = kmalloc(sizeof(struct mtd_info) + + sizeof(struct nand_chip), + GFP_KERNEL); + if (!h1910_nand_mtd) { + printk("Unable to allocate h1910 NAND MTD device structure.\n"); + iounmap ((void *) nandaddr); + return -ENOMEM; + } + + /* Get pointer to private data */ + this = (struct nand_chip *) (&h1910_nand_mtd[1]); + + /* Initialize structures */ + memset((char *) h1910_nand_mtd, 0, sizeof(struct mtd_info)); + memset((char *) this, 0, sizeof(struct nand_chip)); + + /* Link the private data with the MTD structure */ + h1910_nand_mtd->priv = this; + + /* + * Enable VPEN + */ + GPSR(37) = GPIO_bit(37); + + /* insert callbacks */ + this->IO_ADDR_R = nandaddr; + this->IO_ADDR_W = nandaddr; + this->hwcontrol = h1910_hwcontrol; + this->dev_ready = NULL; /* unknown whether that was correct or not so we will just do it like this */ + /* 15 us command delay time */ + this->chip_delay = 50; + this->eccmode = NAND_ECC_SOFT; + this->options = NAND_NO_AUTOINCR; + + /* Scan to find existence of the device */ + if (nand_scan (h1910_nand_mtd, 1)) { + printk(KERN_NOTICE "No NAND device - returning -ENXIO\n"); + kfree (h1910_nand_mtd); + iounmap ((void *) nandaddr); + return -ENXIO; + } + +#ifdef CONFIG_MTD_CMDLINE_PARTS + mtd_parts_nb = parse_cmdline_partitions(h1910_nand_mtd, &mtd_parts, + "h1910-nand"); + if (mtd_parts_nb > 0) + part_type = "command line"; + else + mtd_parts_nb = 0; +#endif + if (mtd_parts_nb == 0) + { + mtd_parts = partition_info; + mtd_parts_nb = NUM_PARTITIONS; + part_type = "static"; + } + + /* Register the partitions */ + printk(KERN_NOTICE "Using %s partition definition\n", part_type); + add_mtd_partitions(h1910_nand_mtd, mtd_parts, mtd_parts_nb); + + /* Return happy */ + return 0; +} +module_init(h1910_init); + +/* + * Clean up routine + */ +static void __exit h1910_cleanup (void) +{ + struct nand_chip *this = (struct nand_chip *) &h1910_nand_mtd[1]; + + /* Release resources, unregister device */ + nand_release (h1910_nand_mtd); + + /* Release io resource */ + iounmap ((void *) this->IO_ADDR_W); + + /* Free the MTD device structure */ + kfree (h1910_nand_mtd); +} +module_exit(h1910_cleanup); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Joshua Wise <joshua at joshuawise dot com>"); +MODULE_DESCRIPTION("NAND flash driver for iPAQ h1910"); |