diff options
Diffstat (limited to 'drivers/mtd/tests/mtd_subpagetest.c')
-rw-r--r-- | drivers/mtd/tests/mtd_subpagetest.c | 124 |
1 files changed, 62 insertions, 62 deletions
diff --git a/drivers/mtd/tests/mtd_subpagetest.c b/drivers/mtd/tests/mtd_subpagetest.c index 9667bf535282..c880c2229c59 100644 --- a/drivers/mtd/tests/mtd_subpagetest.c +++ b/drivers/mtd/tests/mtd_subpagetest.c @@ -19,6 +19,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/init.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -27,8 +29,6 @@ #include <linux/slab.h> #include <linux/sched.h> -#define PRINT_PREF KERN_INFO "mtd_subpagetest: " - static int dev = -EINVAL; module_param(dev, int, S_IRUGO); MODULE_PARM_DESC(dev, "MTD device number to use"); @@ -82,12 +82,12 @@ static int erase_eraseblock(int ebnum) err = mtd_erase(mtd, &ei); if (err) { - printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum); + pr_err("error %d while erasing EB %d\n", err, ebnum); return err; } if (ei.state == MTD_ERASE_FAILED) { - printk(PRINT_PREF "some erase error occurred at EB %d\n", + pr_err("some erase error occurred at EB %d\n", ebnum); return -EIO; } @@ -100,7 +100,7 @@ static int erase_whole_device(void) int err; unsigned int i; - printk(PRINT_PREF "erasing whole device\n"); + pr_info("erasing whole device\n"); for (i = 0; i < ebcnt; ++i) { if (bbt[i]) continue; @@ -109,7 +109,7 @@ static int erase_whole_device(void) return err; cond_resched(); } - printk(PRINT_PREF "erased %u eraseblocks\n", i); + pr_info("erased %u eraseblocks\n", i); return 0; } @@ -122,11 +122,11 @@ static int write_eraseblock(int ebnum) set_random_data(writebuf, subpgsize); err = mtd_write(mtd, addr, subpgsize, &written, writebuf); if (unlikely(err || written != subpgsize)) { - printk(PRINT_PREF "error: write failed at %#llx\n", + pr_err("error: write failed at %#llx\n", (long long)addr); if (written != subpgsize) { - printk(PRINT_PREF " write size: %#x\n", subpgsize); - printk(PRINT_PREF " written: %#zx\n", written); + pr_err(" write size: %#x\n", subpgsize); + pr_err(" written: %#zx\n", written); } return err ? err : -1; } @@ -136,11 +136,11 @@ static int write_eraseblock(int ebnum) set_random_data(writebuf, subpgsize); err = mtd_write(mtd, addr, subpgsize, &written, writebuf); if (unlikely(err || written != subpgsize)) { - printk(PRINT_PREF "error: write failed at %#llx\n", + pr_err("error: write failed at %#llx\n", (long long)addr); if (written != subpgsize) { - printk(PRINT_PREF " write size: %#x\n", subpgsize); - printk(PRINT_PREF " written: %#zx\n", written); + pr_err(" write size: %#x\n", subpgsize); + pr_err(" written: %#zx\n", written); } return err ? err : -1; } @@ -160,12 +160,12 @@ static int write_eraseblock2(int ebnum) set_random_data(writebuf, subpgsize * k); err = mtd_write(mtd, addr, subpgsize * k, &written, writebuf); if (unlikely(err || written != subpgsize * k)) { - printk(PRINT_PREF "error: write failed at %#llx\n", + pr_err("error: write failed at %#llx\n", (long long)addr); if (written != subpgsize) { - printk(PRINT_PREF " write size: %#x\n", + pr_err(" write size: %#x\n", subpgsize * k); - printk(PRINT_PREF " written: %#08zx\n", + pr_err(" written: %#08zx\n", written); } return err ? err : -1; @@ -198,23 +198,23 @@ static int verify_eraseblock(int ebnum) err = mtd_read(mtd, addr, subpgsize, &read, readbuf); if (unlikely(err || read != subpgsize)) { if (mtd_is_bitflip(err) && read == subpgsize) { - printk(PRINT_PREF "ECC correction at %#llx\n", + pr_info("ECC correction at %#llx\n", (long long)addr); err = 0; } else { - printk(PRINT_PREF "error: read failed at %#llx\n", + pr_err("error: read failed at %#llx\n", (long long)addr); return err ? err : -1; } } if (unlikely(memcmp(readbuf, writebuf, subpgsize))) { - printk(PRINT_PREF "error: verify failed at %#llx\n", + pr_err("error: verify failed at %#llx\n", (long long)addr); - printk(PRINT_PREF "------------- written----------------\n"); + pr_info("------------- written----------------\n"); print_subpage(writebuf); - printk(PRINT_PREF "------------- read ------------------\n"); + pr_info("------------- read ------------------\n"); print_subpage(readbuf); - printk(PRINT_PREF "-------------------------------------\n"); + pr_info("-------------------------------------\n"); errcnt += 1; } @@ -225,23 +225,23 @@ static int verify_eraseblock(int ebnum) err = mtd_read(mtd, addr, subpgsize, &read, readbuf); if (unlikely(err || read != subpgsize)) { if (mtd_is_bitflip(err) && read == subpgsize) { - printk(PRINT_PREF "ECC correction at %#llx\n", + pr_info("ECC correction at %#llx\n", (long long)addr); err = 0; } else { - printk(PRINT_PREF "error: read failed at %#llx\n", + pr_err("error: read failed at %#llx\n", (long long)addr); return err ? err : -1; } } if (unlikely(memcmp(readbuf, writebuf, subpgsize))) { - printk(PRINT_PREF "error: verify failed at %#llx\n", + pr_info("error: verify failed at %#llx\n", (long long)addr); - printk(PRINT_PREF "------------- written----------------\n"); + pr_info("------------- written----------------\n"); print_subpage(writebuf); - printk(PRINT_PREF "------------- read ------------------\n"); + pr_info("------------- read ------------------\n"); print_subpage(readbuf); - printk(PRINT_PREF "-------------------------------------\n"); + pr_info("-------------------------------------\n"); errcnt += 1; } @@ -262,17 +262,17 @@ static int verify_eraseblock2(int ebnum) err = mtd_read(mtd, addr, subpgsize * k, &read, readbuf); if (unlikely(err || read != subpgsize * k)) { if (mtd_is_bitflip(err) && read == subpgsize * k) { - printk(PRINT_PREF "ECC correction at %#llx\n", + pr_info("ECC correction at %#llx\n", (long long)addr); err = 0; } else { - printk(PRINT_PREF "error: read failed at " + pr_err("error: read failed at " "%#llx\n", (long long)addr); return err ? err : -1; } } if (unlikely(memcmp(readbuf, writebuf, subpgsize * k))) { - printk(PRINT_PREF "error: verify failed at %#llx\n", + pr_err("error: verify failed at %#llx\n", (long long)addr); errcnt += 1; } @@ -295,17 +295,17 @@ static int verify_eraseblock_ff(int ebnum) err = mtd_read(mtd, addr, subpgsize, &read, readbuf); if (unlikely(err || read != subpgsize)) { if (mtd_is_bitflip(err) && read == subpgsize) { - printk(PRINT_PREF "ECC correction at %#llx\n", + pr_info("ECC correction at %#llx\n", (long long)addr); err = 0; } else { - printk(PRINT_PREF "error: read failed at " + pr_err("error: read failed at " "%#llx\n", (long long)addr); return err ? err : -1; } } if (unlikely(memcmp(readbuf, writebuf, subpgsize))) { - printk(PRINT_PREF "error: verify 0xff failed at " + pr_err("error: verify 0xff failed at " "%#llx\n", (long long)addr); errcnt += 1; } @@ -320,7 +320,7 @@ static int verify_all_eraseblocks_ff(void) int err; unsigned int i; - printk(PRINT_PREF "verifying all eraseblocks for 0xff\n"); + pr_info("verifying all eraseblocks for 0xff\n"); for (i = 0; i < ebcnt; ++i) { if (bbt[i]) continue; @@ -328,10 +328,10 @@ static int verify_all_eraseblocks_ff(void) if (err) return err; if (i % 256 == 0) - printk(PRINT_PREF "verified up to eraseblock %u\n", i); + pr_info("verified up to eraseblock %u\n", i); cond_resched(); } - printk(PRINT_PREF "verified %u eraseblocks\n", i); + pr_info("verified %u eraseblocks\n", i); return 0; } @@ -342,7 +342,7 @@ static int is_block_bad(int ebnum) ret = mtd_block_isbad(mtd, addr); if (ret) - printk(PRINT_PREF "block %d is bad\n", ebnum); + pr_info("block %d is bad\n", ebnum); return ret; } @@ -352,18 +352,18 @@ static int scan_for_bad_eraseblocks(void) bbt = kzalloc(ebcnt, GFP_KERNEL); if (!bbt) { - printk(PRINT_PREF "error: cannot allocate memory\n"); + pr_err("error: cannot allocate memory\n"); return -ENOMEM; } - printk(PRINT_PREF "scanning for bad eraseblocks\n"); + pr_info("scanning for bad eraseblocks\n"); for (i = 0; i < ebcnt; ++i) { bbt[i] = is_block_bad(i) ? 1 : 0; if (bbt[i]) bad += 1; cond_resched(); } - printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad); + pr_info("scanned %d eraseblocks, %d are bad\n", i, bad); return 0; } @@ -377,22 +377,22 @@ static int __init mtd_subpagetest_init(void) printk(KERN_INFO "=================================================\n"); if (dev < 0) { - printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n"); - printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n"); + pr_info("Please specify a valid mtd-device via module parameter\n"); + pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n"); return -EINVAL; } - printk(PRINT_PREF "MTD device: %d\n", dev); + pr_info("MTD device: %d\n", dev); mtd = get_mtd_device(NULL, dev); if (IS_ERR(mtd)) { err = PTR_ERR(mtd); - printk(PRINT_PREF "error: cannot get MTD device\n"); + pr_err("error: cannot get MTD device\n"); return err; } if (mtd->type != MTD_NANDFLASH) { - printk(PRINT_PREF "this test requires NAND flash\n"); + pr_info("this test requires NAND flash\n"); goto out; } @@ -402,7 +402,7 @@ static int __init mtd_subpagetest_init(void) ebcnt = tmp; pgcnt = mtd->erasesize / mtd->writesize; - printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, " + pr_info("MTD device size %llu, eraseblock size %u, " "page size %u, subpage size %u, count of eraseblocks %u, " "pages per eraseblock %u, OOB size %u\n", (unsigned long long)mtd->size, mtd->erasesize, @@ -412,12 +412,12 @@ static int __init mtd_subpagetest_init(void) bufsize = subpgsize * 32; writebuf = kmalloc(bufsize, GFP_KERNEL); if (!writebuf) { - printk(PRINT_PREF "error: cannot allocate memory\n"); + pr_info("error: cannot allocate memory\n"); goto out; } readbuf = kmalloc(bufsize, GFP_KERNEL); if (!readbuf) { - printk(PRINT_PREF "error: cannot allocate memory\n"); + pr_info("error: cannot allocate memory\n"); goto out; } @@ -429,7 +429,7 @@ static int __init mtd_subpagetest_init(void) if (err) goto out; - printk(PRINT_PREF "writing whole device\n"); + pr_info("writing whole device\n"); simple_srand(1); for (i = 0; i < ebcnt; ++i) { if (bbt[i]) @@ -438,13 +438,13 @@ static int __init mtd_subpagetest_init(void) if (unlikely(err)) goto out; if (i % 256 == 0) - printk(PRINT_PREF "written up to eraseblock %u\n", i); + pr_info("written up to eraseblock %u\n", i); cond_resched(); } - printk(PRINT_PREF "written %u eraseblocks\n", i); + pr_info("written %u eraseblocks\n", i); simple_srand(1); - printk(PRINT_PREF "verifying all eraseblocks\n"); + pr_info("verifying all eraseblocks\n"); for (i = 0; i < ebcnt; ++i) { if (bbt[i]) continue; @@ -452,10 +452,10 @@ static int __init mtd_subpagetest_init(void) if (unlikely(err)) goto out; if (i % 256 == 0) - printk(PRINT_PREF "verified up to eraseblock %u\n", i); + pr_info("verified up to eraseblock %u\n", i); cond_resched(); } - printk(PRINT_PREF "verified %u eraseblocks\n", i); + pr_info("verified %u eraseblocks\n", i); err = erase_whole_device(); if (err) @@ -467,7 +467,7 @@ static int __init mtd_subpagetest_init(void) /* Write all eraseblocks */ simple_srand(3); - printk(PRINT_PREF "writing whole device\n"); + pr_info("writing whole device\n"); for (i = 0; i < ebcnt; ++i) { if (bbt[i]) continue; @@ -475,14 +475,14 @@ static int __init mtd_subpagetest_init(void) if (unlikely(err)) goto out; if (i % 256 == 0) - printk(PRINT_PREF "written up to eraseblock %u\n", i); + pr_info("written up to eraseblock %u\n", i); cond_resched(); } - printk(PRINT_PREF "written %u eraseblocks\n", i); + pr_info("written %u eraseblocks\n", i); /* Check all eraseblocks */ simple_srand(3); - printk(PRINT_PREF "verifying all eraseblocks\n"); + pr_info("verifying all eraseblocks\n"); for (i = 0; i < ebcnt; ++i) { if (bbt[i]) continue; @@ -490,10 +490,10 @@ static int __init mtd_subpagetest_init(void) if (unlikely(err)) goto out; if (i % 256 == 0) - printk(PRINT_PREF "verified up to eraseblock %u\n", i); + pr_info("verified up to eraseblock %u\n", i); cond_resched(); } - printk(PRINT_PREF "verified %u eraseblocks\n", i); + pr_info("verified %u eraseblocks\n", i); err = erase_whole_device(); if (err) @@ -503,7 +503,7 @@ static int __init mtd_subpagetest_init(void) if (err) goto out; - printk(PRINT_PREF "finished with %d errors\n", errcnt); + pr_info("finished with %d errors\n", errcnt); out: kfree(bbt); @@ -511,7 +511,7 @@ out: kfree(writebuf); put_mtd_device(mtd); if (err) - printk(PRINT_PREF "error %d occurred\n", err); + pr_info("error %d occurred\n", err); printk(KERN_INFO "=================================================\n"); return err; } |