summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0001.c43
-rw-r--r--drivers/mtd/chips/jedec_probe.c35
-rw-r--r--drivers/mtd/maps/amd76xrom.c1
-rw-r--r--drivers/mtd/maps/physmap_of.c15
-rw-r--r--drivers/mtd/maps/sun_uflash.c8
-rw-r--r--drivers/mtd/mtd_blkdevs.c1
-rw-r--r--drivers/mtd/nand/Kconfig19
-rw-r--r--drivers/mtd/nand/fsl_upm.c9
-rw-r--r--drivers/mtd/nand/mpc5121_nfc.c9
-rw-r--r--drivers/mtd/nand/ndfc.c9
-rw-r--r--drivers/mtd/nand/omap2.c369
-rw-r--r--drivers/mtd/nand/pasemi_nand.c9
-rw-r--r--drivers/mtd/nand/r852.c2
-rw-r--r--drivers/mtd/nand/socrates_nand.c9
-rw-r--r--drivers/mtd/onenand/Kconfig2
-rw-r--r--drivers/mtd/onenand/generic.c2
-rw-r--r--drivers/mtd/onenand/omap2.c38
-rw-r--r--drivers/mtd/sm_ftl.c2
18 files changed, 368 insertions, 214 deletions
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index a8c3e1c9b02a..4aaa88f8ab5f 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -1230,10 +1230,32 @@ static int inval_cache_and_wait_for_operation(
sleep_time = chip_op_time / 2;
for (;;) {
+ if (chip->state != chip_state) {
+ /* Someone's suspended the operation: sleep */
+ DECLARE_WAITQUEUE(wait, current);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ add_wait_queue(&chip->wq, &wait);
+ mutex_unlock(&chip->mutex);
+ schedule();
+ remove_wait_queue(&chip->wq, &wait);
+ mutex_lock(&chip->mutex);
+ continue;
+ }
+
status = map_read(map, cmd_adr);
if (map_word_andequal(map, status, status_OK, status_OK))
break;
+ if (chip->erase_suspended && chip_state == FL_ERASING) {
+ /* Erase suspend occured while sleep: reset timeout */
+ timeo = reset_timeo;
+ chip->erase_suspended = 0;
+ }
+ if (chip->write_suspended && chip_state == FL_WRITING) {
+ /* Write suspend occured while sleep: reset timeout */
+ timeo = reset_timeo;
+ chip->write_suspended = 0;
+ }
if (!timeo) {
map_write(map, CMD(0x70), cmd_adr);
chip->state = FL_STATUS;
@@ -1257,27 +1279,6 @@ static int inval_cache_and_wait_for_operation(
timeo--;
}
mutex_lock(&chip->mutex);
-
- while (chip->state != chip_state) {
- /* Someone's suspended the operation: sleep */
- DECLARE_WAITQUEUE(wait, current);
- set_current_state(TASK_UNINTERRUPTIBLE);
- add_wait_queue(&chip->wq, &wait);
- mutex_unlock(&chip->mutex);
- schedule();
- remove_wait_queue(&chip->wq, &wait);
- mutex_lock(&chip->mutex);
- }
- if (chip->erase_suspended && chip_state == FL_ERASING) {
- /* Erase suspend occured while sleep: reset timeout */
- timeo = reset_timeo;
- chip->erase_suspended = 0;
- }
- if (chip->write_suspended && chip_state == FL_WRITING) {
- /* Write suspend occured while sleep: reset timeout */
- timeo = reset_timeo;
- chip->write_suspended = 0;
- }
}
/* Done and happy. */
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index d72a5fb2d041..4e1be51cc122 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -1935,14 +1935,14 @@ static void jedec_reset(u32 base, struct map_info *map, struct cfi_private *cfi)
}
-static int cfi_jedec_setup(struct cfi_private *p_cfi, int index)
+static int cfi_jedec_setup(struct map_info *map, struct cfi_private *cfi, int index)
{
int i,num_erase_regions;
uint8_t uaddr;
- if (! (jedec_table[index].devtypes & p_cfi->device_type)) {
+ if (!(jedec_table[index].devtypes & cfi->device_type)) {
DEBUG(MTD_DEBUG_LEVEL1, "Rejecting potential %s with incompatible %d-bit device type\n",
- jedec_table[index].name, 4 * (1<<p_cfi->device_type));
+ jedec_table[index].name, 4 * (1<<cfi->device_type));
return 0;
}
@@ -1950,27 +1950,28 @@ static int cfi_jedec_setup(struct cfi_private *p_cfi, int index)
num_erase_regions = jedec_table[index].nr_regions;
- p_cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
- if (!p_cfi->cfiq) {
+ cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
+ if (!cfi->cfiq) {
//xx printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
return 0;
}
- memset(p_cfi->cfiq,0,sizeof(struct cfi_ident));
+ memset(cfi->cfiq, 0, sizeof(struct cfi_ident));
- p_cfi->cfiq->P_ID = jedec_table[index].cmd_set;
- p_cfi->cfiq->NumEraseRegions = jedec_table[index].nr_regions;
- p_cfi->cfiq->DevSize = jedec_table[index].dev_size;
- p_cfi->cfi_mode = CFI_MODE_JEDEC;
+ cfi->cfiq->P_ID = jedec_table[index].cmd_set;
+ cfi->cfiq->NumEraseRegions = jedec_table[index].nr_regions;
+ cfi->cfiq->DevSize = jedec_table[index].dev_size;
+ cfi->cfi_mode = CFI_MODE_JEDEC;
+ cfi->sector_erase_cmd = CMD(0x30);
for (i=0; i<num_erase_regions; i++){
- p_cfi->cfiq->EraseRegionInfo[i] = jedec_table[index].regions[i];
+ cfi->cfiq->EraseRegionInfo[i] = jedec_table[index].regions[i];
}
- p_cfi->cmdset_priv = NULL;
+ cfi->cmdset_priv = NULL;
/* This may be redundant for some cases, but it doesn't hurt */
- p_cfi->mfr = jedec_table[index].mfr_id;
- p_cfi->id = jedec_table[index].dev_id;
+ cfi->mfr = jedec_table[index].mfr_id;
+ cfi->id = jedec_table[index].dev_id;
uaddr = jedec_table[index].uaddr;
@@ -1978,8 +1979,8 @@ static int cfi_jedec_setup(struct cfi_private *p_cfi, int index)
our brains explode when we see the datasheets talking about address
lines numbered from A-1 to A18. The CFI table has unlock addresses
in device-words according to the mode the device is connected in */
- p_cfi->addr_unlock1 = unlock_addrs[uaddr].addr1 / p_cfi->device_type;
- p_cfi->addr_unlock2 = unlock_addrs[uaddr].addr2 / p_cfi->device_type;
+ cfi->addr_unlock1 = unlock_addrs[uaddr].addr1 / cfi->device_type;
+ cfi->addr_unlock2 = unlock_addrs[uaddr].addr2 / cfi->device_type;
return 1; /* ok */
}
@@ -2175,7 +2176,7 @@ static int jedec_probe_chip(struct map_info *map, __u32 base,
"MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
__func__, cfi->mfr, cfi->id,
cfi->addr_unlock1, cfi->addr_unlock2 );
- if (!cfi_jedec_setup(cfi, i))
+ if (!cfi_jedec_setup(map, cfi, i))
return 0;
goto ok_out;
}
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 77d64ce19e9f..92de7e3a49a5 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -151,6 +151,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
printk(KERN_ERR MOD_NAME
" %s(): Unable to register resource %pR - kernel bug?\n",
__func__, &window->rsrc);
+ return -EBUSY;
}
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index 8506578e6a35..3db0cb083d31 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -216,8 +216,7 @@ static void __devinit of_free_probes(const char **probes)
}
#endif
-static int __devinit of_flash_probe(struct platform_device *dev,
- const struct of_device_id *match)
+static int __devinit of_flash_probe(struct platform_device *dev)
{
#ifdef CONFIG_MTD_PARTITIONS
const char **part_probe_types;
@@ -225,7 +224,7 @@ static int __devinit of_flash_probe(struct platform_device *dev,
struct device_node *dp = dev->dev.of_node;
struct resource res;
struct of_flash *info;
- const char *probe_type = match->data;
+ const char *probe_type;
const __be32 *width;
int err;
int i;
@@ -235,6 +234,10 @@ static int __devinit of_flash_probe(struct platform_device *dev,
struct mtd_info **mtd_list = NULL;
resource_size_t res_size;
+ if (!dev->dev.of_match)
+ return -EINVAL;
+ probe_type = dev->dev.of_match->data;
+
reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32);
/*
@@ -418,7 +421,7 @@ static struct of_device_id of_flash_match[] = {
};
MODULE_DEVICE_TABLE(of, of_flash_match);
-static struct of_platform_driver of_flash_driver = {
+static struct platform_driver of_flash_driver = {
.driver = {
.name = "of-flash",
.owner = THIS_MODULE,
@@ -430,12 +433,12 @@ static struct of_platform_driver of_flash_driver = {
static int __init of_flash_init(void)
{
- return of_register_platform_driver(&of_flash_driver);
+ return platform_driver_register(&of_flash_driver);
}
static void __exit of_flash_exit(void)
{
- of_unregister_platform_driver(&of_flash_driver);
+ platform_driver_unregister(&of_flash_driver);
}
module_init(of_flash_init);
diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c
index 3582ba1f9b09..3f1cb328a574 100644
--- a/drivers/mtd/maps/sun_uflash.c
+++ b/drivers/mtd/maps/sun_uflash.c
@@ -108,7 +108,7 @@ int uflash_devinit(struct platform_device *op, struct device_node *dp)
return 0;
}
-static int __devinit uflash_probe(struct platform_device *op, const struct of_device_id *match)
+static int __devinit uflash_probe(struct platform_device *op)
{
struct device_node *dp = op->dev.of_node;
@@ -148,7 +148,7 @@ static const struct of_device_id uflash_match[] = {
MODULE_DEVICE_TABLE(of, uflash_match);
-static struct of_platform_driver uflash_driver = {
+static struct platform_driver uflash_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
@@ -160,12 +160,12 @@ static struct of_platform_driver uflash_driver = {
static int __init uflash_init(void)
{
- return of_register_platform_driver(&uflash_driver);
+ return platform_driver_register(&uflash_driver);
}
static void __exit uflash_exit(void)
{
- of_unregister_platform_driver(&uflash_driver);
+ platform_driver_unregister(&uflash_driver);
}
module_init(uflash_init);
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index cb20c67995d8..e0a2373bf0e2 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -413,7 +413,6 @@ error3:
error2:
list_del(&new->list);
error1:
- kfree(new);
return ret;
}
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index c89592239bc7..4f6c06f16328 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -106,23 +106,6 @@ config MTD_NAND_OMAP2
help
Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
-config MTD_NAND_OMAP_PREFETCH
- bool "GPMC prefetch support for NAND Flash device"
- depends on MTD_NAND_OMAP2
- default y
- help
- The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
- to improve the performance.
-
-config MTD_NAND_OMAP_PREFETCH_DMA
- depends on MTD_NAND_OMAP_PREFETCH
- bool "DMA mode"
- default n
- help
- The GPMC PREFETCH engine can be configured eigther in MPU interrupt mode
- or in DMA interrupt mode.
- Say y for DMA mode or MPU mode will be used
-
config MTD_NAND_IDS
tristate
@@ -476,7 +459,7 @@ config MTD_NAND_MPC5121_NFC
config MTD_NAND_MXC
tristate "MXC NAND support"
- depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX51
+ depends on IMX_HAVE_PLATFORM_MXC_NAND
help
This enables the driver for the NAND flash controller on the
MXC processors.
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index efdcca94ce55..073ee026a17c 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -217,8 +217,7 @@ err:
return ret;
}
-static int __devinit fun_probe(struct platform_device *ofdev,
- const struct of_device_id *ofid)
+static int __devinit fun_probe(struct platform_device *ofdev)
{
struct fsl_upm_nand *fun;
struct resource io_res;
@@ -360,7 +359,7 @@ static const struct of_device_id of_fun_match[] = {
};
MODULE_DEVICE_TABLE(of, of_fun_match);
-static struct of_platform_driver of_fun_driver = {
+static struct platform_driver of_fun_driver = {
.driver = {
.name = "fsl,upm-nand",
.owner = THIS_MODULE,
@@ -372,13 +371,13 @@ static struct of_platform_driver of_fun_driver = {
static int __init fun_module_init(void)
{
- return of_register_platform_driver(&of_fun_driver);
+ return platform_driver_register(&of_fun_driver);
}
module_init(fun_module_init);
static void __exit fun_module_exit(void)
{
- of_unregister_platform_driver(&of_fun_driver);
+ platform_driver_unregister(&of_fun_driver);
}
module_exit(fun_module_exit);
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 469e649c911c..c2f95437e5e9 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -650,8 +650,7 @@ static void mpc5121_nfc_free(struct device *dev, struct mtd_info *mtd)
iounmap(prv->csreg);
}
-static int __devinit mpc5121_nfc_probe(struct platform_device *op,
- const struct of_device_id *match)
+static int __devinit mpc5121_nfc_probe(struct platform_device *op)
{
struct device_node *rootnode, *dn = op->dev.of_node;
struct device *dev = &op->dev;
@@ -891,7 +890,7 @@ static struct of_device_id mpc5121_nfc_match[] __devinitdata = {
{},
};
-static struct of_platform_driver mpc5121_nfc_driver = {
+static struct platform_driver mpc5121_nfc_driver = {
.probe = mpc5121_nfc_probe,
.remove = __devexit_p(mpc5121_nfc_remove),
.driver = {
@@ -903,14 +902,14 @@ static struct of_platform_driver mpc5121_nfc_driver = {
static int __init mpc5121_nfc_init(void)
{
- return of_register_platform_driver(&mpc5121_nfc_driver);
+ return platform_driver_register(&mpc5121_nfc_driver);
}
module_init(mpc5121_nfc_init);
static void __exit mpc5121_nfc_cleanup(void)
{
- of_unregister_platform_driver(&mpc5121_nfc_driver);
+ platform_driver_unregister(&mpc5121_nfc_driver);
}
module_exit(mpc5121_nfc_cleanup);
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index c9ae0a5023b6..bbe6d451290d 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -225,8 +225,7 @@ err:
return ret;
}
-static int __devinit ndfc_probe(struct platform_device *ofdev,
- const struct of_device_id *match)
+static int __devinit ndfc_probe(struct platform_device *ofdev)
{
struct ndfc_controller *ndfc = &ndfc_ctrl;
const __be32 *reg;
@@ -292,7 +291,7 @@ static const struct of_device_id ndfc_match[] = {
};
MODULE_DEVICE_TABLE(of, ndfc_match);
-static struct of_platform_driver ndfc_driver = {
+static struct platform_driver ndfc_driver = {
.driver = {
.name = "ndfc",
.owner = THIS_MODULE,
@@ -304,12 +303,12 @@ static struct of_platform_driver ndfc_driver = {
static int __init ndfc_nand_init(void)
{
- return of_register_platform_driver(&ndfc_driver);
+ return platform_driver_register(&ndfc_driver);
}
static void __exit ndfc_nand_exit(void)
{
- of_unregister_platform_driver(&ndfc_driver);
+ platform_driver_unregister(&ndfc_driver);
}
module_init(ndfc_nand_init);
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 15682ec8530e..7b8f1fffc528 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -11,6 +11,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/sched.h>
#include <linux/mtd/mtd.h>
@@ -24,6 +25,7 @@
#include <plat/nand.h>
#define DRIVER_NAME "omap2-nand"
+#define OMAP_NAND_TIMEOUT_MS 5000
#define NAND_Ecc_P1e (1 << 0)
#define NAND_Ecc_P2e (1 << 1)
@@ -96,26 +98,19 @@
static const char *part_probes[] = { "cmdlinepart", NULL };
#endif
-#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH
-static int use_prefetch = 1;
-
-/* "modprobe ... use_prefetch=0" etc */
-module_param(use_prefetch, bool, 0);
-MODULE_PARM_DESC(use_prefetch, "enable/disable use of PREFETCH");
-
-#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
-static int use_dma = 1;
+/* oob info generated runtime depending on ecc algorithm and layout selected */
+static struct nand_ecclayout omap_oobinfo;
+/* Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks
+ */
+static uint8_t scan_ff_pattern[] = { 0xff };
+static struct nand_bbt_descr bb_descrip_flashbased = {
+ .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
+ .offs = 0,
+ .len = 1,
+ .pattern = scan_ff_pattern,
+};
-/* "modprobe ... use_dma=0" etc */
-module_param(use_dma, bool, 0);
-MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
-#else
-static const int use_dma;
-#endif
-#else
-const int use_prefetch;
-static const int use_dma;
-#endif
struct omap_nand_info {
struct nand_hw_control controller;
@@ -129,6 +124,13 @@ struct omap_nand_info {
unsigned long phys_base;
struct completion comp;
int dma_ch;
+ int gpmc_irq;
+ enum {
+ OMAP_NAND_IO_READ = 0, /* read */
+ OMAP_NAND_IO_WRITE, /* write */
+ } iomode;
+ u_char *buf;
+ int buf_len;
};
/**
@@ -256,7 +258,8 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
}
/* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
+ ret = gpmc_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0);
if (ret) {
/* PFPW engine is busy, use cpu copy method */
if (info->nand.options & NAND_BUSWIDTH_16)
@@ -288,9 +291,10 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
{
struct omap_nand_info *info = container_of(mtd,
struct omap_nand_info, mtd);
- uint32_t pref_count = 0, w_count = 0;
+ uint32_t w_count = 0;
int i = 0, ret = 0;
u16 *p;
+ unsigned long tim, limit;
/* take care of subpage writes */
if (len % 2 != 0) {
@@ -300,7 +304,8 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
}
/* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
+ ret = gpmc_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1);
if (ret) {
/* PFPW engine is busy, use cpu copy method */
if (info->nand.options & NAND_BUSWIDTH_16)
@@ -316,15 +321,17 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
iowrite16(*p++, info->nand.IO_ADDR_W);
}
/* wait for data to flushed-out before reset the prefetch */
- do {
- pref_count = gpmc_read_status(GPMC_PREFETCH_COUNT);
- } while (pref_count);
+ tim = 0;
+ limit = (loops_per_jiffy *
+ msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+ while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+ cpu_relax();
+
/* disable and stop the PFPW engine */
gpmc_prefetch_reset(info->gpmc_cs);
}
}
-#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
/*
* omap_nand_dma_cb: callback on the completion of dma transfer
* @lch: logical channel
@@ -348,14 +355,15 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
{
struct omap_nand_info *info = container_of(mtd,
struct omap_nand_info, mtd);
- uint32_t prefetch_status = 0;
enum dma_data_direction dir = is_write ? DMA_TO_DEVICE :
DMA_FROM_DEVICE;
dma_addr_t dma_addr;
int ret;
+ unsigned long tim, limit;
- /* The fifo depth is 64 bytes. We have a sync at each frame and frame
- * length is 64 bytes.
+ /* The fifo depth is 64 bytes max.
+ * But configure the FIFO-threahold to 32 to get a sync at each frame
+ * and frame length is 32 bytes.
*/
int buf_len = len >> 6;
@@ -396,9 +404,10 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
OMAP24XX_DMA_GPMC, OMAP_DMA_SRC_SYNC);
}
/* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs, 0x1, len, is_write);
+ ret = gpmc_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write);
if (ret)
- /* PFPW engine is busy, use cpu copy methode */
+ /* PFPW engine is busy, use cpu copy method */
goto out_copy;
init_completion(&info->comp);
@@ -407,10 +416,11 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
/* setup and start DMA using dma_addr */
wait_for_completion(&info->comp);
+ tim = 0;
+ limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+ while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+ cpu_relax();
- do {
- prefetch_status = gpmc_read_status(GPMC_PREFETCH_COUNT);
- } while (prefetch_status);
/* disable and stop the PFPW engine */
gpmc_prefetch_reset(info->gpmc_cs);
@@ -426,14 +436,6 @@ out_copy:
: omap_write_buf8(mtd, (u_char *) addr, len);
return 0;
}
-#else
-static void omap_nand_dma_cb(int lch, u16 ch_status, void *data) {}
-static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
- unsigned int len, int is_write)
-{
- return 0;
-}
-#endif
/**
* omap_read_buf_dma_pref - read data from NAND controller into buffer
@@ -466,6 +468,157 @@ static void omap_write_buf_dma_pref(struct mtd_info *mtd,
omap_nand_dma_transfer(mtd, (u_char *) buf, len, 0x1);
}
+/*
+ * omap_nand_irq - GMPC irq handler
+ * @this_irq: gpmc irq number
+ * @dev: omap_nand_info structure pointer is passed here
+ */
+static irqreturn_t omap_nand_irq(int this_irq, void *dev)
+{
+ struct omap_nand_info *info = (struct omap_nand_info *) dev;
+ u32 bytes;
+ u32 irq_stat;
+
+ irq_stat = gpmc_read_status(GPMC_GET_IRQ_STATUS);
+ bytes = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+ bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */
+ if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
+ if (irq_stat & 0x2)
+ goto done;
+
+ if (info->buf_len && (info->buf_len < bytes))
+ bytes = info->buf_len;
+ else if (!info->buf_len)
+ bytes = 0;
+ iowrite32_rep(info->nand.IO_ADDR_W,
+ (u32 *)info->buf, bytes >> 2);
+ info->buf = info->buf + bytes;
+ info->buf_len -= bytes;
+
+ } else {
+ ioread32_rep(info->nand.IO_ADDR_R,
+ (u32 *)info->buf, bytes >> 2);
+ info->buf = info->buf + bytes;
+
+ if (irq_stat & 0x2)
+ goto done;
+ }
+ gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat);
+
+ return IRQ_HANDLED;
+
+done:
+ complete(&info->comp);
+ /* disable irq */
+ gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ, 0);
+
+ /* clear status */
+ gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * omap_read_buf_irq_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ int ret = 0;
+
+ if (len <= mtd->oobsize) {
+ omap_read_buf_pref(mtd, buf, len);
+ return;
+ }
+
+ info->iomode = OMAP_NAND_IO_READ;
+ info->buf = buf;
+ init_completion(&info->comp);
+
+ /* configure and start prefetch transfer */
+ ret = gpmc_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0);
+ if (ret)
+ /* PFPW engine is busy, use cpu copy method */
+ goto out_copy;
+
+ info->buf_len = len;
+ /* enable irq */
+ gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ,
+ (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT));
+
+ /* waiting for read to complete */
+ wait_for_completion(&info->comp);
+
+ /* disable and stop the PFPW engine */
+ gpmc_prefetch_reset(info->gpmc_cs);
+ return;
+
+out_copy:
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ omap_read_buf16(mtd, buf, len);
+ else
+ omap_read_buf8(mtd, buf, len);
+}
+
+/*
+ * omap_write_buf_irq_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_irq_pref(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ int ret = 0;
+ unsigned long tim, limit;
+
+ if (len <= mtd->oobsize) {
+ omap_write_buf_pref(mtd, buf, len);
+ return;
+ }
+
+ info->iomode = OMAP_NAND_IO_WRITE;
+ info->buf = (u_char *) buf;
+ init_completion(&info->comp);
+
+ /* configure and start prefetch transfer : size=24 */
+ ret = gpmc_prefetch_enable(info->gpmc_cs,
+ (PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1);
+ if (ret)
+ /* PFPW engine is busy, use cpu copy method */
+ goto out_copy;
+
+ info->buf_len = len;
+ /* enable irq */
+ gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ,
+ (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT));
+
+ /* waiting for write to complete */
+ wait_for_completion(&info->comp);
+ /* wait for data to flushed-out before reset the prefetch */
+ tim = 0;
+ limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+ while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+ cpu_relax();
+
+ /* disable and stop the PFPW engine */
+ gpmc_prefetch_reset(info->gpmc_cs);
+ return;
+
+out_copy:
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ omap_write_buf16(mtd, buf, len);
+ else
+ omap_write_buf8(mtd, buf, len);
+}
+
/**
* omap_verify_buf - Verify chip data against buffer
* @mtd: MTD device structure
@@ -487,8 +640,6 @@ static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len)
return 0;
}
-#ifdef CONFIG_MTD_NAND_OMAP_HWECC
-
/**
* gen_true_ecc - This function will generate true ECC value
* @ecc_buf: buffer to store ecc code
@@ -708,8 +859,6 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
gpmc_enable_hwecc(info->gpmc_cs, mode, dev_width, info->nand.ecc.size);
}
-#endif
-
/**
* omap_wait - wait until the command is done
* @mtd: MTD device structure
@@ -779,6 +928,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
struct omap_nand_info *info;
struct omap_nand_platform_data *pdata;
int err;
+ int i, offset;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
@@ -804,7 +954,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
info->mtd.name = dev_name(&pdev->dev);
info->mtd.owner = THIS_MODULE;
- info->nand.options |= pdata->devsize ? NAND_BUSWIDTH_16 : 0;
+ info->nand.options = pdata->devsize;
info->nand.options |= NAND_SKIP_BBTSCAN;
/* NAND write protect off */
@@ -842,28 +992,13 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
info->nand.chip_delay = 50;
}
- if (use_prefetch) {
-
+ switch (pdata->xfer_type) {
+ case NAND_OMAP_PREFETCH_POLLED:
info->nand.read_buf = omap_read_buf_pref;
info->nand.write_buf = omap_write_buf_pref;
- if (use_dma) {
- err = omap_request_dma(OMAP24XX_DMA_GPMC, "NAND",
- omap_nand_dma_cb, &info->comp, &info->dma_ch);
- if (err < 0) {
- info->dma_ch = -1;
- printk(KERN_WARNING "DMA request failed."
- " Non-dma data transfer mode\n");
- } else {
- omap_set_dma_dest_burst_mode(info->dma_ch,
- OMAP_DMA_DATA_BURST_16);
- omap_set_dma_src_burst_mode(info->dma_ch,
- OMAP_DMA_DATA_BURST_16);
-
- info->nand.read_buf = omap_read_buf_dma_pref;
- info->nand.write_buf = omap_write_buf_dma_pref;
- }
- }
- } else {
+ break;
+
+ case NAND_OMAP_POLLED:
if (info->nand.options & NAND_BUSWIDTH_16) {
info->nand.read_buf = omap_read_buf16;
info->nand.write_buf = omap_write_buf16;
@@ -871,20 +1006,61 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
info->nand.read_buf = omap_read_buf8;
info->nand.write_buf = omap_write_buf8;
}
+ break;
+
+ case NAND_OMAP_PREFETCH_DMA:
+ err = omap_request_dma(OMAP24XX_DMA_GPMC, "NAND",
+ omap_nand_dma_cb, &info->comp, &info->dma_ch);
+ if (err < 0) {
+ info->dma_ch = -1;
+ dev_err(&pdev->dev, "DMA request failed!\n");
+ goto out_release_mem_region;
+ } else {
+ omap_set_dma_dest_burst_mode(info->dma_ch,
+ OMAP_DMA_DATA_BURST_16);
+ omap_set_dma_src_burst_mode(info->dma_ch,
+ OMAP_DMA_DATA_BURST_16);
+
+ info->nand.read_buf = omap_read_buf_dma_pref;
+ info->nand.write_buf = omap_write_buf_dma_pref;
+ }
+ break;
+
+ case NAND_OMAP_PREFETCH_IRQ:
+ err = request_irq(pdata->gpmc_irq,
+ omap_nand_irq, IRQF_SHARED, "gpmc-nand", info);
+ if (err) {
+ dev_err(&pdev->dev, "requesting irq(%d) error:%d",
+ pdata->gpmc_irq, err);
+ goto out_release_mem_region;
+ } else {
+ info->gpmc_irq = pdata->gpmc_irq;
+ info->nand.read_buf = omap_read_buf_irq_pref;
+ info->nand.write_buf = omap_write_buf_irq_pref;
+ }
+ break;
+
+ default:
+ dev_err(&pdev->dev,
+ "xfer_type(%d) not supported!\n", pdata->xfer_type);
+ err = -EINVAL;
+ goto out_release_mem_region;
}
- info->nand.verify_buf = omap_verify_buf;
-#ifdef CONFIG_MTD_NAND_OMAP_HWECC
- info->nand.ecc.bytes = 3;
- info->nand.ecc.size = 512;
- info->nand.ecc.calculate = omap_calculate_ecc;
- info->nand.ecc.hwctl = omap_enable_hwecc;
- info->nand.ecc.correct = omap_correct_data;
- info->nand.ecc.mode = NAND_ECC_HW;
+ info->nand.verify_buf = omap_verify_buf;
-#else
- info->nand.ecc.mode = NAND_ECC_SOFT;
-#endif
+ /* selsect the ecc type */
+ if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT)
+ info->nand.ecc.mode = NAND_ECC_SOFT;
+ else if ((pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) ||
+ (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE)) {
+ info->nand.ecc.bytes = 3;
+ info->nand.ecc.size = 512;
+ info->nand.ecc.calculate = omap_calculate_ecc;
+ info->nand.ecc.hwctl = omap_enable_hwecc;
+ info->nand.ecc.correct = omap_correct_data;
+ info->nand.ecc.mode = NAND_ECC_HW;
+ }
/* DIP switches on some boards change between 8 and 16 bit
* bus widths for flash. Try the other width if the first try fails.
@@ -897,6 +1073,26 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
}
}
+ /* rom code layout */
+ if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE) {
+
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ offset = 2;
+ else {
+ offset = 1;
+ info->nand.badblock_pattern = &bb_descrip_flashbased;
+ }
+ omap_oobinfo.eccbytes = 3 * (info->mtd.oobsize/16);
+ for (i = 0; i < omap_oobinfo.eccbytes; i++)
+ omap_oobinfo.eccpos[i] = i+offset;
+
+ omap_oobinfo.oobfree->offset = offset + omap_oobinfo.eccbytes;
+ omap_oobinfo.oobfree->length = info->mtd.oobsize -
+ (offset + omap_oobinfo.eccbytes);
+
+ info->nand.ecc.layout = &omap_oobinfo;
+ }
+
#ifdef CONFIG_MTD_PARTITIONS
err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
if (err > 0)
@@ -926,9 +1122,12 @@ static int omap_nand_remove(struct platform_device *pdev)
mtd);
platform_set_drvdata(pdev, NULL);
- if (use_dma)
+ if (info->dma_ch != -1)
omap_free_dma(info->dma_ch);
+ if (info->gpmc_irq)
+ free_irq(info->gpmc_irq, info);
+
/* Release NAND device, its internal structures and partitions */
nand_release(&info->mtd);
iounmap(info->nand.IO_ADDR_R);
@@ -947,16 +1146,8 @@ static struct platform_driver omap_nand_driver = {
static int __init omap_nand_init(void)
{
- printk(KERN_INFO "%s driver initializing\n", DRIVER_NAME);
+ pr_info("%s driver initializing\n", DRIVER_NAME);
- /* This check is required if driver is being
- * loaded run time as a module
- */
- if ((1 == use_dma) && (0 == use_prefetch)) {
- printk(KERN_INFO"Wrong parameters: 'use_dma' can not be 1 "
- "without use_prefetch'. Prefetch will not be"
- " used in either mode (mpu or dma)\n");
- }
return platform_driver_register(&omap_nand_driver);
}
@@ -968,6 +1159,6 @@ static void __exit omap_nand_exit(void)
module_init(omap_nand_init);
module_exit(omap_nand_exit);
-MODULE_ALIAS(DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Glue layer for NAND flash on TI OMAP boards");
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index bb277a54986f..59efa829ef24 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -89,8 +89,7 @@ int pasemi_device_ready(struct mtd_info *mtd)
return !!(inl(lpcctl) & LBICTRL_LPCCTL_NR);
}
-static int __devinit pasemi_nand_probe(struct platform_device *ofdev,
- const struct of_device_id *match)
+static int __devinit pasemi_nand_probe(struct platform_device *ofdev)
{
struct pci_dev *pdev;
struct device_node *np = ofdev->dev.of_node;
@@ -219,7 +218,7 @@ static const struct of_device_id pasemi_nand_match[] =
MODULE_DEVICE_TABLE(of, pasemi_nand_match);
-static struct of_platform_driver pasemi_nand_driver =
+static struct platform_driver pasemi_nand_driver =
{
.driver = {
.name = (char*)driver_name,
@@ -232,13 +231,13 @@ static struct of_platform_driver pasemi_nand_driver =
static int __init pasemi_nand_init(void)
{
- return of_register_platform_driver(&pasemi_nand_driver);
+ return platform_driver_register(&pasemi_nand_driver);
}
module_init(pasemi_nand_init);
static void __exit pasemi_nand_exit(void)
{
- of_unregister_platform_driver(&pasemi_nand_driver);
+ platform_driver_unregister(&pasemi_nand_driver);
}
module_exit(pasemi_nand_exit);
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index d9d7efbc77cc..6322d1fb5d62 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -930,7 +930,7 @@ int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
init_completion(&dev->dma_done);
- dev->card_workqueue = create_freezeable_workqueue(DRV_NAME);
+ dev->card_workqueue = create_freezable_workqueue(DRV_NAME);
if (!dev->card_workqueue)
goto error9;
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index a8e403eebedb..a853548986f0 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -162,8 +162,7 @@ static const char *part_probes[] = { "cmdlinepart", NULL };
/*
* Probe for the NAND device.
*/
-static int __devinit socrates_nand_probe(struct platform_device *ofdev,
- const struct of_device_id *ofid)
+static int __devinit socrates_nand_probe(struct platform_device *ofdev)
{
struct socrates_nand_host *host;
struct mtd_info *mtd;
@@ -300,7 +299,7 @@ static const struct of_device_id socrates_nand_match[] =
MODULE_DEVICE_TABLE(of, socrates_nand_match);
-static struct of_platform_driver socrates_nand_driver = {
+static struct platform_driver socrates_nand_driver = {
.driver = {
.name = "socrates_nand",
.owner = THIS_MODULE,
@@ -312,12 +311,12 @@ static struct of_platform_driver socrates_nand_driver = {
static int __init socrates_nand_init(void)
{
- return of_register_platform_driver(&socrates_nand_driver);
+ return platform_driver_register(&socrates_nand_driver);
}
static void __exit socrates_nand_exit(void)
{
- of_unregister_platform_driver(&socrates_nand_driver);
+ platform_driver_unregister(&socrates_nand_driver);
}
module_init(socrates_nand_init);
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 4dbd0f58eebf..4f426195f8db 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -32,7 +32,7 @@ config MTD_ONENAND_OMAP2
config MTD_ONENAND_SAMSUNG
tristate "OneNAND on Samsung SOC controller support"
- depends on ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310
+ depends on ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4
help
Support for a OneNAND flash device connected to an Samsung SOC.
S3C64XX/S5PC100 use command mapping method.
diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c
index e78914938c5c..ac08750748a3 100644
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -131,7 +131,7 @@ static struct platform_driver generic_onenand_driver = {
.remove = __devexit_p(generic_onenand_remove),
};
-MODULE_ALIAS(DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
static int __init generic_onenand_init(void)
{
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index ac31f461cc1c..14a49abe057e 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -63,7 +63,7 @@ struct omap2_onenand {
struct completion dma_done;
int dma_channel;
int freq;
- int (*setup)(void __iomem *base, int freq);
+ int (*setup)(void __iomem *base, int *freq_ptr);
struct regulator *regulator;
};
@@ -148,11 +148,9 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
wait_err("controller error", state, ctrl, intr);
return -EIO;
}
- if ((intr & intr_flags) != intr_flags) {
- wait_err("timeout", state, ctrl, intr);
- return -EIO;
- }
- return 0;
+ if ((intr & intr_flags) == intr_flags)
+ return 0;
+ /* Continue in wait for interrupt branch */
}
if (state != FL_READING) {
@@ -581,7 +579,7 @@ static int __adjust_timing(struct device *dev, void *data)
/* DMA is not in use so this is all that is needed */
/* Revisit for OMAP3! */
- ret = c->setup(c->onenand.base, c->freq);
+ ret = c->setup(c->onenand.base, &c->freq);
return ret;
}
@@ -673,7 +671,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
}
if (pdata->onenand_setup != NULL) {
- r = pdata->onenand_setup(c->onenand.base, c->freq);
+ r = pdata->onenand_setup(c->onenand.base, &c->freq);
if (r < 0) {
dev_err(&pdev->dev, "Onenand platform setup failed: "
"%d\n", r);
@@ -718,8 +716,8 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
}
dev_info(&pdev->dev, "initializing on CS%d, phys base 0x%08lx, virtual "
- "base %p\n", c->gpmc_cs, c->phys_base,
- c->onenand.base);
+ "base %p, freq %d MHz\n", c->gpmc_cs, c->phys_base,
+ c->onenand.base, c->freq);
c->pdev = pdev;
c->mtd.name = dev_name(&pdev->dev);
@@ -754,24 +752,6 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
if ((r = onenand_scan(&c->mtd, 1)) < 0)
goto err_release_regulator;
- switch ((c->onenand.version_id >> 4) & 0xf) {
- case 0:
- c->freq = 40;
- break;
- case 1:
- c->freq = 54;
- break;
- case 2:
- c->freq = 66;
- break;
- case 3:
- c->freq = 83;
- break;
- case 4:
- c->freq = 104;
- break;
- }
-
#ifdef CONFIG_MTD_PARTITIONS
r = parse_mtd_partitions(&c->mtd, part_probes, &c->parts, 0);
if (r > 0)
@@ -860,7 +840,7 @@ static void __exit omap2_onenand_exit(void)
module_init(omap2_onenand_init);
module_exit(omap2_onenand_exit);
-MODULE_ALIAS(DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jarkko Lavinen <jarkko.lavinen@nokia.com>");
MODULE_DESCRIPTION("Glue layer for OneNAND flash on OMAP2 / OMAP3");
diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c
index 67822cf6c025..ac0d6a8613b5 100644
--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -1258,7 +1258,7 @@ static struct mtd_blktrans_ops sm_ftl_ops = {
static __init int sm_module_init(void)
{
int error = 0;
- cache_flush_workqueue = create_freezeable_workqueue("smflush");
+ cache_flush_workqueue = create_freezable_workqueue("smflush");
if (IS_ERR(cache_flush_workqueue))
return PTR_ERR(cache_flush_workqueue);
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-29 06:29:19 +0000