diff options
Diffstat (limited to 'drivers/net/3c527.c')
| -rw-r--r-- | drivers/net/3c527.c | 1661 |
1 files changed, 0 insertions, 1661 deletions
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c deleted file mode 100644 index d9d056d207f3..000000000000 --- a/drivers/net/3c527.c +++ /dev/null @@ -1,1661 +0,0 @@ -/* 3c527.c: 3Com Etherlink/MC32 driver for Linux 2.4 and 2.6. - * - * (c) Copyright 1998 Red Hat Software Inc - * Written by Alan Cox. - * Further debugging by Carl Drougge. - * Initial SMP support by Felipe W Damasio <felipewd@terra.com.br> - * Heavily modified by Richard Procter <rnp@paradise.net.nz> - * - * Based on skeleton.c written 1993-94 by Donald Becker and ne2.c - * (for the MCA stuff) written by Wim Dumon. - * - * Thanks to 3Com for making this possible by providing me with the - * documentation. - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#define DRV_NAME "3c527" -#define DRV_VERSION "0.7-SMP" -#define DRV_RELDATE "2003/09/21" - -static const char *version = -DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Richard Procter <rnp@paradise.net.nz>\n"; - -/** - * DOC: Traps for the unwary - * - * The diagram (Figure 1-1) and the POS summary disagree with the - * "Interrupt Level" section in the manual. - * - * The manual contradicts itself when describing the minimum number - * buffers in the 'configure lists' command. - * My card accepts a buffer config of 4/4. - * - * Setting the SAV BP bit does not save bad packets, but - * only enables RX on-card stats collection. - * - * The documentation in places seems to miss things. In actual fact - * I've always eventually found everything is documented, it just - * requires careful study. - * - * DOC: Theory Of Operation - * - * The 3com 3c527 is a 32bit MCA bus mastering adapter with a large - * amount of on board intelligence that housekeeps a somewhat dumber - * Intel NIC. For performance we want to keep the transmit queue deep - * as the card can transmit packets while fetching others from main - * memory by bus master DMA. Transmission and reception are driven by - * circular buffer queues. - * - * The mailboxes can be used for controlling how the card traverses - * its buffer rings, but are used only for initial setup in this - * implementation. The exec mailbox allows a variety of commands to - * be executed. Each command must complete before the next is - * executed. Primarily we use the exec mailbox for controlling the - * multicast lists. We have to do a certain amount of interesting - * hoop jumping as the multicast list changes can occur in interrupt - * state when the card has an exec command pending. We defer such - * events until the command completion interrupt. - * - * A copy break scheme (taken from 3c59x.c) is employed whereby - * received frames exceeding a configurable length are passed - * directly to the higher networking layers without incuring a copy, - * in what amounts to a time/space trade-off. - * - * The card also keeps a large amount of statistical information - * on-board. In a perfect world, these could be used safely at no - * cost. However, lacking information to the contrary, processing - * them without races would involve so much extra complexity as to - * make it unworthwhile to do so. In the end, a hybrid SW/HW - * implementation was made necessary --- see mc32_update_stats(). - * - * DOC: Notes - * - * It should be possible to use two or more cards, but at this stage - * only by loading two copies of the same module. - * - * The on-board 82586 NIC has trouble receiving multiple - * back-to-back frames and so is likely to drop packets from fast - * senders. -**/ - -#include <linux/module.h> - -#include <linux/errno.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/if_ether.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/mca-legacy.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/skbuff.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/wait.h> -#include <linux/ethtool.h> -#include <linux/completion.h> -#include <linux/bitops.h> -#include <linux/semaphore.h> - -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/dma.h> - -#include "3c527.h" - -MODULE_LICENSE("GPL"); - -/* - * The name of the card. Is used for messages and in the requests for - * io regions, irqs and dma channels - */ -static const char* cardname = DRV_NAME; - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 2 -#endif - -static unsigned int mc32_debug = NET_DEBUG; - -/* The number of low I/O ports used by the ethercard. */ -#define MC32_IO_EXTENT 8 - -/* As implemented, values must be a power-of-2 -- 4/8/16/32 */ -#define TX_RING_LEN 32 /* Typically the card supports 37 */ -#define RX_RING_LEN 8 /* " " " */ - -/* Copy break point, see above for details. - * Setting to > 1512 effectively disables this feature. */ -#define RX_COPYBREAK 200 /* Value from 3c59x.c */ - -/* Issue the 82586 workaround command - this is for "busy lans", but - * basically means for all lans now days - has a performance (latency) - * cost, but best set. */ -static const int WORKAROUND_82586=1; - -/* Pointers to buffers and their on-card records */ -struct mc32_ring_desc -{ - volatile struct skb_header *p; - struct sk_buff *skb; -}; - -/* Information that needs to be kept for each board. */ -struct mc32_local -{ - int slot; - - u32 base; - volatile struct mc32_mailbox *rx_box; - volatile struct mc32_mailbox *tx_box; - volatile struct mc32_mailbox *exec_box; - volatile struct mc32_stats *stats; /* Start of on-card statistics */ - u16 tx_chain; /* Transmit list start offset */ - u16 rx_chain; /* Receive list start offset */ - u16 tx_len; /* Transmit list count */ - u16 rx_len; /* Receive list count */ - - u16 xceiver_desired_state; /* HALTED or RUNNING */ - u16 cmd_nonblocking; /* Thread is uninterested in command result */ - u16 mc_reload_wait; /* A multicast load request is pending */ - u32 mc_list_valid; /* True when the mclist is set */ - - struct mc32_ring_desc tx_ring[TX_RING_LEN]; /* Host Transmit ring */ - struct mc32_ring_desc rx_ring[RX_RING_LEN]; /* Host Receive ring */ - - atomic_t tx_count; /* buffers left */ - atomic_t tx_ring_head; /* index to tx en-queue end */ - u16 tx_ring_tail; /* index to tx de-queue end */ - - u16 rx_ring_tail; /* index to rx de-queue end */ - - struct semaphore cmd_mutex; /* Serialises issuing of execute commands */ - struct completion execution_cmd; /* Card has completed an execute command */ - struct completion xceiver_cmd; /* Card has completed a tx or rx command */ -}; - -/* The station (ethernet) address prefix, used for a sanity check. */ -#define SA_ADDR0 0x02 -#define SA_ADDR1 0x60 -#define SA_ADDR2 0xAC - -struct mca_adapters_t { - unsigned int id; - char *name; -}; - -static const struct mca_adapters_t mc32_adapters[] = { - { 0x0041, "3COM EtherLink MC/32" }, - { 0x8EF5, "IBM High Performance Lan Adapter" }, - { 0x0000, NULL } -}; - - -/* Macros for ring index manipulations */ -static inline u16 next_rx(u16 rx) { return (rx+1)&(RX_RING_LEN-1); }; -static inline u16 prev_rx(u16 rx) { return (rx-1)&(RX_RING_LEN-1); }; - -static inline u16 next_tx(u16 tx) { return (tx+1)&(TX_RING_LEN-1); }; - - -/* Index to functions, as function prototypes. */ -static int mc32_probe1(struct net_device *dev, int ioaddr); -static int mc32_command(struct net_device *dev, u16 cmd, void *data, int len); -static int mc32_open(struct net_device *dev); -static void mc32_timeout(struct net_device *dev); -static netdev_tx_t mc32_send_packet(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t mc32_interrupt(int irq, void *dev_id); -static int mc32_close(struct net_device *dev); -static struct net_device_stats *mc32_get_stats(struct net_device *dev); -static void mc32_set_multicast_list(struct net_device *dev); -static void mc32_reset_multicast_list(struct net_device *dev); -static const struct ethtool_ops netdev_ethtool_ops; - -static void cleanup_card(struct net_device *dev) -{ - struct mc32_local *lp = netdev_priv(dev); - unsigned slot = lp->slot; - mca_mark_as_unused(slot); - mca_set_adapter_name(slot, NULL); - free_irq(dev->irq, dev); - release_region(dev->base_addr, MC32_IO_EXTENT); -} - -/** - * mc32_probe - Search for supported boards - * @unit: interface number to use - * - * Because MCA bus is a real bus and we can scan for cards we could do a - * single scan for all boards here. Right now we use the passed in device - * structure and scan for only one board. This needs fixing for modules - * in particular. - */ - -struct net_device *__init mc32_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct mc32_local)); - static int current_mca_slot = -1; - int i; - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) - sprintf(dev->name, "eth%d", unit); - - /* Do not check any supplied i/o locations. - POS registers usually don't fail :) */ - - /* MCA cards have POS registers. - Autodetecting MCA cards is extremely simple. - Just search for the card. */ - - for(i = 0; (mc32_adapters[i].name != NULL); i++) { - current_mca_slot = - mca_find_unused_adapter(mc32_adapters[i].id, 0); - - if(current_mca_slot != MCA_NOTFOUND) { - if(!mc32_probe1(dev, current_mca_slot)) - { - mca_set_adapter_name(current_mca_slot, - mc32_adapters[i].name); - mca_mark_as_used(current_mca_slot); - err = register_netdev(dev); - if (err) { - cleanup_card(dev); - free_netdev(dev); - dev = ERR_PTR(err); - } - return dev; - } - - } - } - free_netdev(dev); - return ERR_PTR(-ENODEV); -} - -static const struct net_device_ops netdev_ops = { - .ndo_open = mc32_open, - .ndo_stop = mc32_close, - .ndo_start_xmit = mc32_send_packet, - .ndo_get_stats = mc32_get_stats, - .ndo_set_multicast_list = mc32_set_multicast_list, - .ndo_tx_timeout = mc32_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/** - * mc32_probe1 - Check a given slot for a board and test the card - * @dev: Device structure to fill in - * @slot: The MCA bus slot being used by this card - * - * Decode the slot data and configure the card structures. Having done this we - * can reset the card and configure it. The card does a full self test cycle - * in firmware so we have to wait for it to return and post us either a - * failure case or some addresses we use to find the board internals. - */ - -static int __init mc32_probe1(struct net_device *dev, int slot) -{ - static unsigned version_printed; - int i, err; - u8 POS; - u32 base; - struct mc32_local *lp = netdev_priv(dev); - static const u16 mca_io_bases[] = { - 0x7280,0x7290, - 0x7680,0x7690, - 0x7A80,0x7A90, - 0x7E80,0x7E90 - }; - static const u32 mca_mem_bases[] = { - 0x00C0000, - 0x00C4000, - 0x00C8000, - 0x00CC000, - 0x00D0000, - 0x00D4000, - 0x00D8000, - 0x00DC000 - }; - static const char * const failures[] = { - "Processor instruction", - "Processor data bus", - "Processor data bus", - "Processor data bus", - "Adapter bus", - "ROM checksum", - "Base RAM", - "Extended RAM", - "82586 internal loopback", - "82586 initialisation failure", - "Adapter list configuration error" - }; - - /* Time to play MCA games */ - - if (mc32_debug && version_printed++ == 0) - pr_debug("%s", version); - - pr_info("%s: %s found in slot %d: ", dev->name, cardname, slot); - - POS = mca_read_stored_pos(slot, 2); - - if(!(POS&1)) - { - pr_cont("disabled.\n"); - return -ENODEV; - } - - /* Fill in the 'dev' fields. */ - dev->base_addr = mca_io_bases[(POS>>1)&7]; - dev->mem_start = mca_mem_bases[(POS>>4)&7]; - - POS = mca_read_stored_pos(slot, 4); - if(!(POS&1)) - { - pr_cont("memory window disabled.\n"); - return -ENODEV; - } - - POS = mca_read_stored_pos(slot, 5); - - i=(POS>>4)&3; - if(i==3) - { - pr_cont("invalid memory window.\n"); - return -ENODEV; - } - - i*=16384; - i+=16384; - - dev->mem_end=dev->mem_start + i; - - dev->irq = ((POS>>2)&3)+9; - - if(!request_region(dev->base_addr, MC32_IO_EXTENT, cardname)) - { - pr_cont("io 0x%3lX, which is busy.\n", dev->base_addr); - return -EBUSY; - } - - pr_cont("io 0x%3lX irq %d mem 0x%lX (%dK)\n", - dev->base_addr, dev->irq, dev->mem_start, i/1024); - - - /* We ought to set the cache line size here.. */ - - - /* - * Go PROM browsing - */ - - /* Retrieve and print the ethernet address. */ - for (i = 0; i < 6; i++) - { - mca_write_pos(slot, 6, i+12); - mca_write_pos(slot, 7, 0); - - dev->dev_addr[i] = mca_read_pos(slot,3); - } - - pr_info("%s: Address %pM ", dev->name, dev->dev_addr); - - mca_write_pos(slot, 6, 0); - mca_write_pos(slot, 7, 0); - - POS = mca_read_stored_pos(slot, 4); - - if(POS&2) - pr_cont(": BNC port selected.\n"); - else - pr_cont(": AUI port selected.\n"); - - POS=inb(dev->base_addr+HOST_CTRL); - POS|=HOST_CTRL_ATTN|HOST_CTRL_RESET; - POS&=~HOST_CTRL_INTE; - outb(POS, dev->base_addr+HOST_CTRL); - /* Reset adapter */ - udelay(100); - /* Reset off */ - POS&=~(HOST_CTRL_ATTN|HOST_CTRL_RESET); - outb(POS, dev->base_addr+HOST_CTRL); - - udelay(300); - - /* - * Grab the IRQ - */ - - err = request_irq(dev->irq, mc32_interrupt, IRQF_SHARED, DRV_NAME, dev); - if (err) { - release_region(dev->base_addr, MC32_IO_EXTENT); - pr_err("%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq); - goto err_exit_ports; - } - - memset(lp, 0, sizeof(struct mc32_local)); - lp->slot = slot; - - i=0; - - base = inb(dev->base_addr); - - while(base == 0xFF) - { - i++; - if(i == 1000) - { - pr_err("%s: failed to boot adapter.\n", dev->name); - err = -ENODEV; - goto err_exit_irq; - } - udelay(1000); - if(inb(dev->base_addr+2)&(1<<5)) - base = inb(dev->base_addr); - } - - if(base>0) - { - if(base < 0x0C) - pr_err("%s: %s%s.\n", dev->name, failures[base-1], - base<0x0A?" test failure":""); - else - pr_err("%s: unknown failure %d.\n", dev->name, base); - err = -ENODEV; - goto err_exit_irq; - } - - base=0; - for(i=0;i<4;i++) - { - int n=0; - - while(!(inb(dev->base_addr+2)&(1<<5))) - { - n++; - udelay(50); - if(n>100) - { - pr_err("%s: mailbox read fail (%d).\n", dev->name, i); - err = -ENODEV; - goto err_exit_irq; - } - } - - base|=(inb(dev->base_addr)<<(8*i)); - } - - lp->exec_box=isa_bus_to_virt(dev->mem_start+base); - - base=lp->exec_box->data[1]<<16|lp->exec_box->data[0]; - - lp->base = dev->mem_start+base; - - lp->rx_box=isa_bus_to_virt(lp->base + lp->exec_box->data[2]); - lp->tx_box=isa_bus_to_virt(lp->base + lp->exec_box->data[3]); - - lp->stats = isa_bus_to_virt(lp->base + lp->exec_box->data[5]); - - /* - * Descriptor chains (card relative) - */ - - lp->tx_chain = lp->exec_box->data[8]; /* Transmit list start offset */ - lp->rx_chain = lp->exec_box->data[10]; /* Receive list start offset */ - lp->tx_len = lp->exec_box->data[9]; /* Transmit list count */ - lp->rx_len = lp->exec_box->data[11]; /* Receive list count */ - - sema_init(&lp->cmd_mutex, 0); - init_completion(&lp->execution_cmd); - init_completion(&lp->xceiver_cmd); - - pr_info("%s: Firmware Rev %d. %d RX buffers, %d TX buffers. Base of 0x%08X.\n", - dev->name, lp->exec_box->data[12], lp->rx_len, lp->tx_len, lp->base); - - dev->netdev_ops = &netdev_ops; - dev->watchdog_timeo = HZ*5; /* Board does all the work */ - dev->ethtool_ops = &netdev_ethtool_ops; - - return 0; - -err_exit_irq: - free_irq(dev->irq, dev); -err_exit_ports: - release_region(dev->base_addr, MC32_IO_EXTENT); - return err; -} - - -/** - * mc32_ready_poll - wait until we can feed it a command - * @dev: The device to wait for - * - * Wait until the card becomes ready to accept a command via the - * command register. This tells us nothing about the completion - * status of any pending commands and takes very little time at all. - */ - -static inline void mc32_ready_poll(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - while(!(inb(ioaddr+HOST_STATUS)&HOST_STATUS_CRR)); -} - - -/** - * mc32_command_nowait - send a command non blocking - * @dev: The 3c527 to issue the command to - * @cmd: The command word to write to the mailbox - * @data: A data block if the command expects one - * @len: Length of the data block - * - * Send a command from interrupt state. If there is a command - * currently being executed then we return an error of -1. It - * simply isn't viable to wait around as commands may be - * slow. This can theoretically be starved on SMP, but it's hard - * to see a realistic situation. We do not wait for the command - * to complete --- we rely on the interrupt handler to tidy up - * after us. - */ - -static int mc32_command_nowait(struct net_device *dev, u16 cmd, void *data, int len) -{ - struct mc32_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - int ret = -1; - - if (down_trylock(&lp->cmd_mutex) == 0) - { - lp->cmd_nonblocking=1; - lp->exec_box->mbox=0; - lp->exec_box->mbox=cmd; - memcpy((void *)lp->exec_box->data, data, len); - barrier(); /* the memcpy forgot the volatile so be sure */ - - /* Send the command */ - mc32_ready_poll(dev); - outb(1<<6, ioaddr+HOST_CMD); - - ret = 0; - - /* Interrupt handler will signal mutex on completion */ - } - - return ret; -} - - -/** - * mc32_command - send a command and sleep until completion - * @dev: The 3c527 card to issue the command to - * @cmd: The command word to write to the mailbox - * @data: A data block if the command expects one - * @len: Length of the data block - * - * Sends exec commands in a user context. This permits us to wait around - * for the replies and also to wait for the command buffer to complete - * from a previous command before we execute our command. After our - * command completes we will attempt any pending multicast reload - * we blocked off by hogging the exec buffer. - * - * You feed the card a command, you wait, it interrupts you get a - * reply. All well and good. The complication arises because you use - * commands for filter list changes which come in at bh level from things - * like IPV6 group stuff. - */ - -static int mc32_command(struct net_device *dev, u16 cmd, void *data, int len) -{ - struct mc32_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - int ret = 0; - - down(&lp->cmd_mutex); - - /* - * My Turn - */ - - lp->cmd_nonblocking=0; - lp->exec_box->mbox=0; - lp->exec_box->mbox=cmd; - memcpy((void *)lp->exec_box->data, data, len); - barrier(); /* the memcpy forgot the volatile so be sure */ - - mc32_ready_poll(dev); - outb(1<<6, ioaddr+HOST_CMD); - - wait_for_completion(&lp->execution_cmd); - - if(lp->exec_box->mbox&(1<<13)) - ret = -1; - - up(&lp->cmd_mutex); - - /* - * A multicast set got blocked - try it now - */ - - if(lp->mc_reload_wait) - { - mc32_reset_multicast_list(dev); - } - - return ret; -} - - -/** - * mc32_start_transceiver - tell board to restart tx/rx - * @dev: The 3c527 card to issue the command to - * - * This may be called from the interrupt state, where it is used - * to restart the rx ring if the card runs out of rx buffers. - * - * We must first check if it's ok to (re)start the transceiver. See - * mc32_close for details. - */ - -static void mc32_start_transceiver(struct net_device *dev) { - - struct mc32_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - /* Ignore RX overflow on device closure */ - if (lp->xceiver_desired_state==HALTED) - return; - - /* Give the card the offset to the post-EOL-bit RX descriptor */ - mc32_ready_poll(dev); - lp->rx_box->mbox=0; - lp->rx_box->data[0]=lp->rx_ring[prev_rx(lp->rx_ring_tail)].p->next; - outb(HOST_CMD_START_RX, ioaddr+HOST_CMD); - - mc32_ready_poll(dev); - lp->tx_box->mbox=0; - outb(HOST_CMD_RESTRT_TX, ioaddr+HOST_CMD); /* card ignores this on RX restart */ - - /* We are not interrupted on start completion */ -} - - -/** - * mc32_halt_transceiver - tell board to stop tx/rx - * @dev: The 3c527 card to issue the command to - * - * We issue the commands to halt the card's transceiver. In fact, - * after some experimenting we now simply tell the card to - * suspend. When issuing aborts occasionally odd things happened. - * - * We then sleep until the card has notified us that both rx and - * tx have been suspended. - */ - -static void mc32_halt_transceiver(struct net_device *dev) -{ - struct mc32_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - mc32_ready_poll(dev); - lp->rx_box->mbox=0; - outb(HOST_CMD_SUSPND_RX, ioaddr+HOST_CMD); - wait_for_completion(&lp->xceiver_cmd); - - mc32_ready_poll(dev); - lp->tx_box->mbox=0; - outb(HOST_CMD_SUSPND_TX, ioaddr+HOST_CMD); - wait_for_completion(&lp->xceiver_cmd); -} - - -/** - * mc32_load_rx_ring - load the ring of receive buffers - * @dev: 3c527 to build the ring for - * - * This initialises the on-card and driver datastructures to - * the point where mc32_start_transceiver() can be called. - * - * The card sets up the receive ring for us. We are required to use the - * ring it provides, although the size of the ring is configurable. - * - * We allocate an sk_buff for each ring entry in turn and - * initialise its house-keeping info. At the same time, we read - * each 'next' pointer in our rx_ring array. This reduces slow - * shared-memory reads and makes it easy to access predecessor - * descriptors. - * - * We then set the end-of-list bit for the last entry so that the - * card will know when it has run out of buffers. - */ - -static int mc32_load_rx_ring(struct net_device *dev) -{ - struct mc32_local *lp = netdev_priv(dev); - int i; - u16 rx_base; - volatile struct skb_header *p; - - rx_base=lp->rx_chain; - - for(i=0; i<RX_RING_LEN; i++) { - lp->rx_ring[i].skb=alloc_skb(1532, GFP_KERNEL); - if (lp->rx_ring[i].skb==NULL) { - for (;i>=0;i--) - kfree_skb(lp->rx_ring[i].skb); - return -ENOBUFS; - } - skb_reserve(lp->rx_ring[i].skb, 18); - - p=isa_bus_to_virt(lp->base+rx_base); - - p->control=0; - p->data=isa_virt_to_bus(lp->rx_ring[i].skb->data); - p->status=0; - p->length=1532; - - lp->rx_ring[i].p=p; - rx_base=p->next; - } - - lp->rx_ring[i-1].p->control |= CONTROL_EOL; - - lp->rx_ring_tail=0; - - return 0; -} - - -/** - * mc32_flush_rx_ring - free the ring of receive buffers - * @lp: Local data of 3c527 to flush the rx ring of - * - * Free the buffer for each ring slot. This may be called - * before mc32_load_rx_ring(), eg. on error in mc32_open(). - * Requires rx skb pointers to point to a valid skb, or NULL. - */ - -static void mc32_flush_rx_ring(struct net_device *dev) -{ - struct mc32_local *lp = netdev_priv(dev); - int i; - - for(i=0; i < RX_RING_LEN; i++) - { - if (lp->rx_ring[i].skb) { - dev_kfree_skb(lp->rx_ring[i].skb); - lp->rx_ring[i].skb = NULL; - } - lp->rx_ring[i].p=NULL; - } -} - - -/** - * mc32_load_tx_ring - load transmit ring - * @dev: The 3c527 card to issue the command to - * - * This sets up the host transmit data-structures. - * - * First, we obtain from the card it's current position in the tx - * ring, so that we will know where to begin transmitting - * packets. - * - * Then, we read the 'next' pointers from the on-card tx ring into - * our tx_ring array to reduce slow shared-mem reads. Finally, we - * intitalise the tx house keeping variables. - * - */ - -static void mc32_load_tx_ring(struct net_device *dev) -{ - struct mc32_local *lp = netdev_priv(dev); - volatile struct skb_header *p; - int i; - u16 tx_base; - - tx_base=lp->tx_box->data[0]; - - for(i=0 ; i<TX_RING_LEN ; i++) - { - p=isa_bus_to_virt(lp->base+tx_base); - lp->tx_ring[i].p=p; - lp->tx_ring[i].skb=NULL; - - tx_base=p->next; - } - - /* -1 so that tx_ring_head cannot "lap" tx_ring_tail */ - /* see mc32_tx_ring */ - - atomic_set(&lp->tx_count, TX_RING_LEN-1); - atomic_set(&lp->tx_ring_head, 0); - lp->tx_ring_tail=0; -} - - -/** - * mc32_flush_tx_ring - free transmit ring - * @lp: Local data of 3c527 to flush the tx ring of - * - * If the ring is non-empty, zip over the it, freeing any - * allocated skb_buffs. The tx ring house-keeping variables are - * then reset. Requires rx skb pointers to point to a valid skb, - * or NULL. - */ - -static void mc32_flush_tx_ring(struct net_device *dev) -{ - struct mc32_local *lp = netdev_priv(dev); - int i; - - for (i=0; i < TX_RING_LEN; i++) - { - if (lp->tx_ring[i].skb) - { - dev_kfree_skb(lp->tx_ring[i].skb); - lp->tx_ring[i].skb = NULL; - } - } - - atomic_set(&lp->tx_count, 0); - atomic_set(&lp->tx_ring_head, 0); - lp->tx_ring_tail=0; -} - - -/** - * mc32_open - handle 'up' of card - * @dev: device to open - * - * The user is trying to bring the card into ready state. This requires - * a brief dialogue with the card. Firstly we enable interrupts and then - * 'indications'. Without these enabled the card doesn't bother telling - * us what it has done. This had me puzzled for a week. - * - * We configure the number of card descriptors, then load the network - * address and multicast filters. Turn on the workaround mode. This - * works around a bug in the 82586 - it asks the firmware to do - * so. It has a performance (latency) hit but is needed on busy - * [read most] lans. We load the ring with buffers then we kick it - * all off. - */ - -static int mc32_open(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - struct mc32_local *lp = netdev_priv(dev); - u8 one=1; - u8 regs; - u16 descnumbuffs[2] = {TX_RING_LEN, RX_RING_LEN}; - - /* - * Interrupts enabled - */ - - regs=inb(ioaddr+HOST_CTRL); - regs|=HOST_CTRL_INTE; - outb(regs, ioaddr+HOST_CTRL); - - /* - * Allow ourselves to issue commands - */ - - up(&lp->cmd_mutex); - - - /* - * Send the indications on command - */ - - mc32_command(dev, 4, &one, 2); - - /* - * Poke it to make sure it's really dead. - */ - - mc32_halt_transceiver(dev); - mc32_flush_tx_ring(dev); - - /* - * Ask card to set up on-card descriptors to our spec - */ - - if(mc32_command(dev, 8, descnumbuffs, 4)) { - pr_info("%s: %s rejected our buffer configuration!\n", - dev->name, cardname); - mc32_close(dev); - return -ENOBUFS; - } - - /* Report new configuration */ - mc32_command(dev, 6, NULL, 0); - - lp->tx_chain = lp->exec_box->data[8]; /* Transmit list start offset */ - lp->rx_chain = lp->exec_box->data[10]; /* Receive list start offset */ - lp->tx_len = lp->exec_box->data[9]; /* Transmit list count */ - lp->rx_len = lp->exec_box->data[11]; /* Receive list count */ - - /* Set Network Address */ - mc32_command(dev, 1, dev->dev_addr, 6); - - /* Set the filters */ - mc32_set_multicast_list(dev); - - if (WORKAROUND_82586) { - u16 zero_word=0; - mc32_command(dev, 0x0D, &zero_word, 2); /* 82586 bug workaround on */ - } - - mc32_load_tx_ring(dev); - - if(mc32_load_rx_ring(dev)) - { - mc32_close(dev); - return -ENOBUFS; - } - - lp->xceiver_desired_state = RUNNING; - - /* And finally, set the ball rolling... */ - mc32_start_transceiver(dev); - - netif_start_queue(dev); - - return 0; -} - - -/** - * mc32_timeout - handle a timeout from the network layer - * @dev: 3c527 that timed out - * - * Handle a timeout on transmit from the 3c527. This normally means - * bad things as the hardware handles cable timeouts and mess for - * us. - * - */ - -static void mc32_timeout(struct net_device *dev) -{ - pr_warning("%s: transmit timed out?\n", dev->name); - /* Try to restart the adaptor. */ - netif_wake_queue(dev); -} - - -/** - * mc32_send_packet - queue a frame for transmit - * @skb: buffer to transmit - * @dev: 3c527 to send it out of - * - * Transmit a buffer. This normally means throwing the buffer onto - * the transmit queue as the queue is quite large. If the queue is - * full then we set tx_busy and return. Once the interrupt handler - * gets messages telling it to reclaim transmit queue entries, we will - * clear tx_busy and the kernel will start calling this again. - * - * We do not disable interrupts or acquire any locks; this can - * run concurrently with mc32_tx_ring(), and the function itself - * is serialised at a higher layer. However, similarly for the - * card itself, we must ensure that we update tx_ring_head only - * after we've established a valid packet on the tx ring (and - * before we let the card "see" it, to prevent it racing with the - * irq handler). - * - */ - -static netdev_tx_t mc32_send_packet(struct sk_buff *skb, - struct net_device *dev) -{ - struct mc32_local *lp = netdev_priv(dev); - u32 head = atomic_read(&lp->tx_ring_head); - - volatile struct skb_header *p, *np; - - netif_stop_queue(dev); - - if(atomic_read(&lp->tx_count)==0) { - return NETDEV_TX_BUSY; - } - - if (skb_padto(skb, ETH_ZLEN)) { - netif_wake_queue(dev); - return NETDEV_TX_OK; - } - - atomic_dec(&lp->tx_count); - - /* P is the last sending/sent buffer as a pointer */ - p=lp->tx_ring[head].p; - - head = next_tx(head); - - /* NP is the buffer we will be loading */ - np=lp->tx_ring[head].p; - - /* We will need this to flush the buffer out */ - lp->tx_ring[head].skb=skb; - - np->length = unlikely(skb->len < ETH_ZLEN) ? ETH_ZLEN : skb->len; - np->data = isa_virt_to_bus(skb->data); - np->status = 0; - np->control = CONTROL_EOP | CONTROL_EOL; - wmb(); - - /* - * The new frame has been setup; we can now - * let the interrupt handler and card "see" it - */ - - atomic_set(&lp->tx_ring_head, head); - p->control &= ~CONTROL_EOL; - - netif_wake_queue(dev); - return NETDEV_TX_OK; -} - - -/** - * mc32_update_stats - pull off the on board statistics - * @dev: 3c527 to service - * - * - * Query and reset the on-card stats. There's the small possibility - * of a race here, which would result in an underestimation of - * actual errors. As such, we'd prefer to keep all our stats - * collection in software. As a rule, we do. However it can't be - * used for rx errors and collisions as, by default, the card discards - * bad rx packets. - * - * Setting the SAV BP in the rx filter command supposedly - * stops this behaviour. However, testing shows that it only seems to - * enable the collation of on-card rx statistics --- the driver - * never sees an RX descriptor with an error status set. - * - */ - -static void mc32_update_stats(struct net_device *dev) -{ - struct mc32_local *lp = netdev_priv(dev); - volatile struct mc32_stats *st = lp->stats; - - u32 rx_errors=0; - - rx_errors+=dev->stats.rx_crc_errors +=st->rx_crc_errors; - st->rx_crc_errors=0; - rx_errors+=dev->stats.rx_fifo_errors +=st->rx_overrun_errors; - st->rx_overrun_errors=0; - rx_errors+=dev->stats.rx_frame_errors +=st->rx_alignment_errors; - st->rx_alignment_errors=0; - rx_errors+=dev->stats.rx_length_errors+=st->rx_tooshort_errors; - st->rx_tooshort_errors=0; - rx_errors+=dev->stats.rx_missed_errors+=st->rx_outofresource_errors; - st->rx_outofresource_errors=0; - dev->stats.rx_errors=rx_errors; - - /* Number of packets which saw one collision */ - dev->stats.collisions+=st->dataC[10]; - st->dataC[10]=0; - - /* Number of packets which saw 2--15 collisions */ - dev->stats.collisions+=st->dataC[11]; - st->dataC[11]=0; -} - - -/** - * mc32_rx_ring - process the receive ring - * @dev: 3c527 that needs its receive ring processing - * - * - * We have received one or more indications from the card that a - * receive has completed. The buffer ring thus contains dirty - * entries. We walk the ring by iterating over the circular rx_ring - * array, starting at the next dirty buffer (which happens to be the - * one we finished up at last time around). - * - * For each completed packet, we will either copy it and pass it up - * the stack or, if the packet is near MTU sized, we allocate - * another buffer and flip the old one up the stack. - * - * We must succeed in keeping a buffer on the ring. If necessary we - * will toss a received packet rather than lose a ring entry. Once - * the first uncompleted descriptor is found, we move the - * End-Of-List bit to include the buffers just processed. - * - */ - -static void mc32_rx_ring(struct net_device *dev) -{ - struct mc32_local *lp = netdev_priv(dev); - volatile struct skb_header *p; - u16 rx_ring_tail; - u16 rx_old_tail; - int x=0; - - rx_old_tail = rx_ring_tail = lp->rx_ring_tail; - - do - { - p=lp->rx_ring[rx_ring_tail].p; - - if(!(p->status & (1<<7))) { /* Not COMPLETED */ - break; - } - if(p->status & (1<<6)) /* COMPLETED_OK */ - { - - u16 length=p->length; - struct sk_buff *skb; - struct sk_buff *newskb; - - /* Try to save time by avoiding a copy on big frames */ - - if ((length > RX_COPYBREAK) && - ((newskb=dev_alloc_skb(1532)) != NULL)) - { - skb=lp->rx_ring[rx_ring_tail].skb; - skb_put(skb, length); - - skb_reserve(newskb,18); - lp->rx_ring[rx_ring_tail].skb=newskb; - p->data=isa_virt_to_bus(newskb->data); - } - else - { - skb=dev_alloc_skb(length+2); - - if(skb==NULL) { - dev->stats.rx_dropped++; - goto dropped; - } - - skb_reserve(skb,2); - memcpy(skb_put(skb, length), - lp->rx_ring[rx_ring_tail].skb->data, length); - } - - skb->protocol=eth_type_trans(skb,dev); - dev->stats.rx_packets++; - dev->stats.rx_bytes += length; - netif_rx(skb); - } - - dropped: - p->length = 1532; - p->status = 0; - - rx_ring_tail=next_rx(rx_ring_tail); - } - while(x++<48); - - /* If there was actually a frame to be processed, place the EOL bit */ - /* at the descriptor prior to the one to be filled next */ - - if (rx_ring_tail != rx_old_tail) - { - lp->rx_ring[prev_rx(rx_ring_tail)].p->control |= CONTROL_EOL; - lp->rx_ring[prev_rx(rx_old_tail)].p->control &= ~CONTROL_EOL; - - lp->rx_ring_tail=rx_ring_tail; - } -} - - -/** - * mc32_tx_ring - process completed transmits - * @dev: 3c527 that needs its transmit ring processing - * - * - * This operates in a similar fashion to mc32_rx_ring. We iterate - * over the transmit ring. For each descriptor which has been - * processed by the card, we free its associated buffer and note - * any errors. This continues until the transmit ring is emptied - * or we reach a descriptor that hasn't yet been processed by the - * card. - * - */ - -static void mc32_tx_ring(struct net_device *dev) -{ - struct mc32_local *lp = netdev_priv(dev); - volatile struct skb_header *np; - - /* - * We rely on head==tail to mean 'queue empty'. - * This is why lp->tx_count=TX_RING_LEN-1: in order to prevent - * tx_ring_head wrapping to tail and confusing a 'queue empty' - * condition with 'queue full' - */ - - while (lp->tx_ring_tail != atomic_read(&lp->tx_ring_head)) - { - u16 t; - - t=next_tx(lp->tx_ring_tail); - np=lp->tx_ring[t].p; - - if(!(np->status & (1<<7))) - { - /* Not COMPLETED */ - break; - } - dev->stats.tx_packets++; - if(!(np->status & (1<<6))) /* Not COMPLETED_OK */ - { - dev->stats.tx_errors++; - - switch(np->status&0x0F) - { - case 1: - dev->stats.tx_aborted_errors++; - break; /* Max collisions */ - case 2: - dev->stats.tx_fifo_errors++; - break; - case 3: - dev->stats.tx_carrier_errors++; - break; - case 4: - dev->stats.tx_window_errors++; - break; /* CTS Lost */ - case 5: - dev->stats.tx_aborted_errors++; - break; /* Transmit timeout */ - } - } - /* Packets are sent in order - this is - basically a FIFO queue of buffers matching - the card ring */ - dev->stats.tx_bytes+=lp->tx_ring[t].skb->len; - dev_kfree_skb_irq(lp->tx_ring[t].skb); - lp->tx_ring[t].skb=NULL; - atomic_inc(&lp->tx_count); - netif_wake_queue(dev); - - lp->tx_ring_tail=t; - } - -} - - -/** - * mc32_interrupt - handle an interrupt from a 3c527 - * @irq: Interrupt number - * @dev_id: 3c527 that requires servicing - * @regs: Registers (unused) - * - * - * An interrupt is raised whenever the 3c527 writes to the command - * register. This register contains the message it wishes to send us - * packed into a single byte field. We keep reading status entries - * until we have processed all the control items, but simply count - * transmit and receive reports. When all reports are in we empty the - * transceiver rings as appropriate. This saves the overhead of - * multiple command requests. - * - * Because MCA is level-triggered, we shouldn't miss indications. - * Therefore, we needn't ask the card to suspend interrupts within - * this handler. The card receives an implicit acknowledgment of the - * current interrupt when we read the command register. - * - */ - -static irqreturn_t mc32_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct mc32_local *lp; - int ioaddr, status, boguscount = 0; - int rx_event = 0; - int tx_event = 0; - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - - /* See whats cooking */ - - while((inb(ioaddr+HOST_STATUS)&HOST_STATUS_CWR) && boguscount++<2000) - { - status=inb(ioaddr+HOST_CMD); - - pr_debug("Status TX%d RX%d EX%d OV%d BC%d\n", - (status&7), (status>>3)&7, (status>>6)&1, - (status>>7)&1, boguscount); - - switch(status&7) - { - case 0: - break; - case 6: /* TX fail */ - case 2: /* TX ok */ - tx_event = 1; - break; - case 3: /* Halt */ - case 4: /* Abort */ - complete(&lp->xceiver_cmd); - break; - default: - pr_notice("%s: strange tx ack %d\n", dev->name, status&7); - } - status>>=3; - switch(status&7) - { - case 0: - break; - case 2: /* RX */ - rx_event=1; - break; - case 3: /* Halt */ - case 4: /* Abort */ - complete(&lp->xceiver_cmd); - break; - case 6: - /* Out of RX buffers stat */ - /* Must restart rx */ - dev->stats.rx_dropped++; - mc32_rx_ring(dev); - mc32_start_transceiver(dev); - break; - default: - pr_notice("%s: strange rx ack %d\n", - dev->name, status&7); - } - status>>=3; - if(status&1) - { - /* - * No thread is waiting: we need to tidy - * up ourself. - */ - - if (lp->cmd_nonblocking) { - up(&lp->cmd_mutex); - if (lp->mc_reload_wait) - mc32_reset_multicast_list(dev); - } - else complete(&lp->execution_cmd); - } - if(status&2) - { - /* - * We get interrupted once per - * counter that is about to overflow. - */ - - mc32_update_stats(dev); - } - } - - - /* - * Process the transmit and receive rings - */ - - if(tx_event) - mc32_tx_ring(dev); - - if(rx_event) - mc32_rx_ring(dev); - - return IRQ_HANDLED; -} - - -/** - * mc32_close - user configuring the 3c527 down - * @dev: 3c527 card to shut down - * - * The 3c527 is a bus mastering device. We must be careful how we - * shut it down. It may also be running shared interrupt so we have - * to be sure to silence it properly - * - * We indicate that the card is closing to the rest of the - * driver. Otherwise, it is possible that the card may run out - * of receive buffers and restart the transceiver while we're - * trying to close it. - * - * We abort any receive and transmits going on and then wait until - * any pending exec commands have completed in other code threads. - * In theory we can't get here while that is true, in practice I am - * paranoid - * - * We turn off the interrupt enable for the board to be sure it can't - * intefere with other devices. - */ - -static int mc32_close(struct net_device *dev) -{ - struct mc32_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - u8 regs; - u16 one=1; - - lp->xceiver_desired_state = HALTED; - netif_stop_queue(dev); - - /* - * Send the indications on command (handy debug check) - */ - - mc32_command(dev, 4, &one, 2); - - /* Shut down the transceiver */ - - mc32_halt_transceiver(dev); - - /* Ensure we issue no more commands beyond this point */ - - down(&lp->cmd_mutex); - - /* Ok the card is now stopping */ - - regs=inb(ioaddr+HOST_CTRL); - regs&=~HOST_CTRL_INTE; - outb(regs, ioaddr+HOST_CTRL); - - mc32_flush_rx_ring(dev); - mc32_flush_tx_ring(dev); - - mc32_update_stats(dev); - - return 0; -} - - -/** - * mc32_get_stats - hand back stats to network layer - * @dev: The 3c527 card to handle - * - * We've collected all the stats we can in software already. Now - * it's time to update those kept on-card and return the lot. - * - */ - -static struct net_device_stats *mc32_get_stats(struct net_device *dev) -{ - mc32_update_stats(dev); - return &dev->stats; -} - - -/** - * do_mc32_set_multicast_list - attempt to update multicasts - * @dev: 3c527 device to load the list on - * @retry: indicates this is not the first call. - * - * - * Actually set or clear the multicast filter for this adaptor. The - * locking issues are handled by this routine. We have to track - * state as it may take multiple calls to get the command sequence - * completed. We just keep trying to schedule the loads until we - * manage to process them all. - * - * num_addrs == -1 Promiscuous mode, receive all packets - * - * num_addrs == 0 Normal mode, clear multicast list - * - * num_addrs > 0 Multicast mode, receive normal and MC packets, - * and do best-effort filtering. - * - * See mc32_update_stats() regards setting the SAV BP bit. - * - */ - -static void do_mc32_set_multicast_list(struct net_device *dev, int retry) -{ - struct mc32_local *lp = netdev_priv(dev); - u16 filt = (1<<2); /* Save Bad Packets, for stats purposes */ - - if ((dev->flags&IFF_PROMISC) || - (dev->flags&IFF_ALLMULTI) || - netdev_mc_count(dev) > 10) - /* Enable promiscuous mode */ - filt |= 1; - else if (!netdev_mc_empty(dev)) - { - unsigned char block[62]; - unsigned char *bp; - struct netdev_hw_addr *ha; - - if(retry==0) - lp->mc_list_valid = 0; - if(!lp->mc_list_valid) - { - block[1]=0; - block[0]=netdev_mc_count(dev); - bp=block+2; - - netdev_for_each_mc_addr(ha, dev) { - memcpy(bp, ha->addr, 6); - bp+=6; - } - if(mc32_command_nowait(dev, 2, block, - 2+6*netdev_mc_count(dev))==-1) - { - lp->mc_reload_wait = 1; - return; - } - lp->mc_list_valid=1; - } - } - - if(mc32_command_nowait(dev, 0, &filt, 2)==-1) - { - lp->mc_reload_wait = 1; - } - else { - lp->mc_reload_wait = 0; - } -} - - -/** - * mc32_set_multicast_list - queue multicast list update - * @dev: The 3c527 to use - * - * Commence loading the multicast list. This is called when the kernel - * changes the lists. It will override any pending list we are trying to - * load. - */ - -static void mc32_set_multicast_list(struct net_device *dev) -{ - do_mc32_set_multicast_list(dev,0); -} - - -/** - * mc32_reset_multicast_list - reset multicast list - * @dev: The 3c527 to use - * - * Attempt the next step in loading the multicast lists. If this attempt - * fails to complete then it will be scheduled and this function called - * again later from elsewhere. - */ - -static void mc32_reset_multicast_list(struct net_device *dev) -{ - do_mc32_set_multicast_list(dev,1); -} - -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - sprintf(info->bus_info, "MCA 0x%lx", dev->base_addr); -} - -static u32 netdev_get_msglevel(struct net_device *dev) -{ - return mc32_debug; -} - -static void netdev_set_msglevel(struct net_device *dev, u32 level) -{ - mc32_debug = level; -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, - .get_msglevel = netdev_get_msglevel, - .set_msglevel = netdev_set_msglevel, -}; - -#ifdef MODULE - -static struct net_device *this_device; - -/** - * init_module - entry point - * - * Probe and locate a 3c527 card. This really should probe and locate - * all the 3c527 cards in the machine not just one of them. Yes you can - * insmod multiple modules for now but it's a hack. - */ - -int __init init_module(void) -{ - this_device = mc32_probe(-1); - if (IS_ERR(this_device)) - return PTR_ERR(this_device); - return 0; -} - -/** - * cleanup_module - free resources for an unload - * - * Unloading time. We release the MCA bus resources and the interrupt - * at which point everything is ready to unload. The card must be stopped - * at this point or we would not have been called. When we unload we - * leave the card stopped but not totally shut down. When the card is - * initialized it must be rebooted or the rings reloaded before any - * transmit operations are allowed to start scribbling into memory. - */ - -void __exit cleanup_module(void) -{ - unregister_netdev(this_device); - cleanup_card(this_device); - free_netdev(this_device); -} - -#endif /* MODULE */ |