diff options
Diffstat (limited to 'drivers/net/arm/ether3.c')
| -rw-r--r-- | drivers/net/arm/ether3.c | 936 |
1 files changed, 936 insertions, 0 deletions
diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c new file mode 100644 index 000000000000..1cc53abc3a39 --- /dev/null +++ b/drivers/net/arm/ether3.c @@ -0,0 +1,936 @@ +/* + * linux/drivers/acorn/net/ether3.c + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * SEEQ nq8005 ethernet driver for Acorn/ANT Ether3 card + * for Acorn machines + * + * By Russell King, with some suggestions from borris@ant.co.uk + * + * Changelog: + * 1.04 RMK 29/02/1996 Won't pass packets that are from our ethernet + * address up to the higher levels - they're + * silently ignored. I/F can now be put into + * multicast mode. Receiver routine optimised. + * 1.05 RMK 30/02/1996 Now claims interrupt at open when part of + * the kernel rather than when a module. + * 1.06 RMK 02/03/1996 Various code cleanups + * 1.07 RMK 13/10/1996 Optimised interrupt routine and transmit + * routines. + * 1.08 RMK 14/10/1996 Fixed problem with too many packets, + * prevented the kernel message about dropped + * packets appearing too many times a second. + * Now does not disable all IRQs, only the IRQ + * used by this card. + * 1.09 RMK 10/11/1996 Only enables TX irq when buffer space is low, + * but we still service the TX queue if we get a + * RX interrupt. + * 1.10 RMK 15/07/1997 Fixed autoprobing of NQ8004. + * 1.11 RMK 16/11/1997 Fixed autoprobing of NQ8005A. + * 1.12 RMK 31/12/1997 Removed reference to dev_tint for Linux 2.1. + * RMK 27/06/1998 Changed asm/delay.h to linux/delay.h. + * 1.13 RMK 29/06/1998 Fixed problem with transmission of packets. + * Chip seems to have a bug in, whereby if the + * packet starts two bytes from the end of the + * buffer, it corrupts the receiver chain, and + * never updates the transmit status correctly. + * 1.14 RMK 07/01/1998 Added initial code for ETHERB addressing. + * 1.15 RMK 30/04/1999 More fixes to the transmit routine for buggy + * hardware. + * 1.16 RMK 10/02/2000 Updated for 2.3.43 + * 1.17 RMK 13/05/2000 Updated for 2.3.99-pre8 + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/interrupt.h> +#include <linux/ptrace.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/bitops.h> + +#include <asm/system.h> +#include <asm/ecard.h> +#include <asm/io.h> +#include <asm/irq.h> + +static char version[] __initdata = "ether3 ethernet driver (c) 1995-2000 R.M.King v1.17\n"; + +#include "ether3.h" + +static unsigned int net_debug = NET_DEBUG; + +static void ether3_setmulticastlist(struct net_device *dev); +static int ether3_rx(struct net_device *dev, unsigned int maxcnt); +static void ether3_tx(struct net_device *dev); +static int ether3_open (struct net_device *dev); +static int ether3_sendpacket (struct sk_buff *skb, struct net_device *dev); +static irqreturn_t ether3_interrupt (int irq, void *dev_id, struct pt_regs *regs); +static int ether3_close (struct net_device *dev); +static struct net_device_stats *ether3_getstats (struct net_device *dev); +static void ether3_setmulticastlist (struct net_device *dev); +static void ether3_timeout(struct net_device *dev); + +#define BUS_16 2 +#define BUS_8 1 +#define BUS_UNKNOWN 0 + +/* --------------------------------------------------------------------------- */ + +typedef enum { + buffer_write, + buffer_read +} buffer_rw_t; + +/* + * ether3 read/write. Slow things down a bit... + * The SEEQ8005 doesn't like us writing to its registers + * too quickly. + */ +static inline void ether3_outb(int v, const void __iomem *r) +{ + writeb(v, r); + udelay(1); +} + +static inline void ether3_outw(int v, const void __iomem *r) +{ + writew(v, r); + udelay(1); +} +#define ether3_inb(r) ({ unsigned int __v = readb((r)); udelay(1); __v; }) +#define ether3_inw(r) ({ unsigned int __v = readw((r)); udelay(1); __v; }) + +static int +ether3_setbuffer(struct net_device *dev, buffer_rw_t read, int start) +{ + int timeout = 1000; + + ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); + ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND); + + while ((ether3_inw(REG_STATUS) & STAT_FIFOEMPTY) == 0) { + if (!timeout--) { + printk("%s: setbuffer broken\n", dev->name); + priv(dev)->broken = 1; + return 1; + } + udelay(1); + } + + if (read == buffer_read) { + ether3_outw(start, REG_DMAADDR); + ether3_outw(priv(dev)->regs.command | CMD_FIFOREAD, REG_COMMAND); + } else { + ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND); + ether3_outw(start, REG_DMAADDR); + } + return 0; +} + +/* + * write data to the buffer memory + */ +#define ether3_writebuffer(dev,data,length) \ + writesw(REG_BUFWIN, (data), (length) >> 1) + +#define ether3_writeword(dev,data) \ + writew((data), REG_BUFWIN) + +#define ether3_writelong(dev,data) { \ + void __iomem *reg_bufwin = REG_BUFWIN; \ + writew((data), reg_bufwin); \ + writew((data) >> 16, reg_bufwin); \ +} + +/* + * read data from the buffer memory + */ +#define ether3_readbuffer(dev,data,length) \ + readsw(REG_BUFWIN, (data), (length) >> 1) + +#define ether3_readword(dev) \ + readw(REG_BUFWIN) + +#define ether3_readlong(dev) \ + readw(REG_BUFWIN) | (readw(REG_BUFWIN) << 16) + +/* + * Switch LED off... + */ +static void ether3_ledoff(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); +} + +/* + * switch LED on... + */ +static inline void ether3_ledon(struct net_device *dev) +{ + del_timer(&priv(dev)->timer); + priv(dev)->timer.expires = jiffies + HZ / 50; /* leave on for 1/50th second */ + priv(dev)->timer.data = (unsigned long)dev; + priv(dev)->timer.function = ether3_ledoff; + add_timer(&priv(dev)->timer); + if (priv(dev)->regs.config2 & CFG2_CTRLO) + ether3_outw(priv(dev)->regs.config2 &= ~CFG2_CTRLO, REG_CONFIG2); +} + +/* + * Read the ethernet address string from the on board rom. + * This is an ascii string!!! + */ +static int __init +ether3_addr(char *addr, struct expansion_card *ec) +{ + struct in_chunk_dir cd; + char *s; + + if (ecard_readchunk(&cd, ec, 0xf5, 0) && (s = strchr(cd.d.string, '('))) { + int i; + for (i = 0; i<6; i++) { + addr[i] = simple_strtoul(s + 1, &s, 0x10); + if (*s != (i==5?')' : ':' )) + break; + } + if (i == 6) + return 0; + } + /* I wonder if we should even let the user continue in this case + * - no, it would be better to disable the device + */ + printk(KERN_ERR "ether3: Couldn't read a valid MAC address from card.\n"); + return -ENODEV; +} + +/* --------------------------------------------------------------------------- */ + +static int __init +ether3_ramtest(struct net_device *dev, unsigned char byte) +{ + unsigned char *buffer = kmalloc(RX_END, GFP_KERNEL); + int i,ret = 0; + int max_errors = 4; + int bad = -1; + + if (!buffer) + return 1; + + memset(buffer, byte, RX_END); + ether3_setbuffer(dev, buffer_write, 0); + ether3_writebuffer(dev, buffer, TX_END); + ether3_setbuffer(dev, buffer_write, RX_START); + ether3_writebuffer(dev, buffer + RX_START, RX_LEN); + memset(buffer, byte ^ 0xff, RX_END); + ether3_setbuffer(dev, buffer_read, 0); + ether3_readbuffer(dev, buffer, TX_END); + ether3_setbuffer(dev, buffer_read, RX_START); + ether3_readbuffer(dev, buffer + RX_START, RX_LEN); + + for (i = 0; i < RX_END; i++) { + if (buffer[i] != byte) { + if (max_errors > 0 && bad != buffer[i]) { + printk("%s: RAM failed with (%02X instead of %02X) at 0x%04X", + dev->name, buffer[i], byte, i); + ret = 2; + max_errors--; + bad = i; + } + } else { + if (bad != -1) { + if (bad != i - 1) + printk(" - 0x%04X\n", i - 1); + printk("\n"); + bad = -1; + } + } + } + if (bad != -1) + printk(" - 0xffff\n"); + kfree(buffer); + + return ret; +} + +/* ------------------------------------------------------------------------------- */ + +static int __init ether3_init_2(struct net_device *dev) +{ + int i; + + priv(dev)->regs.config1 = CFG1_RECVCOMPSTAT0|CFG1_DMABURST8; + priv(dev)->regs.config2 = CFG2_CTRLO|CFG2_RECVCRC|CFG2_ERRENCRC; + priv(dev)->regs.command = 0; + + /* + * Set up our hardware address + */ + ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1); + for (i = 0; i < 6; i++) + ether3_outb(dev->dev_addr[i], REG_BUFWIN); + + if (dev->flags & IFF_PROMISC) + priv(dev)->regs.config1 |= CFG1_RECVPROMISC; + else if (dev->flags & IFF_MULTICAST) + priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI; + else + priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD; + + /* + * There is a problem with the NQ8005 in that it occasionally loses the + * last two bytes. To get round this problem, we receive the CRC as + * well. That way, if we do lose the last two, then it doesn't matter. + */ + ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1); + ether3_outw((TX_END>>8) - 1, REG_BUFWIN); + ether3_outw(priv(dev)->rx_head, REG_RECVPTR); + ether3_outw(0, REG_TRANSMITPTR); + ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND); + ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); + ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); + ether3_outw(priv(dev)->regs.command, REG_COMMAND); + + i = ether3_ramtest(dev, 0x5A); + if(i) + return i; + i = ether3_ramtest(dev, 0x1E); + if(i) + return i; + + ether3_setbuffer(dev, buffer_write, 0); + ether3_writelong(dev, 0); + return 0; +} + +static void +ether3_init_for_open(struct net_device *dev) +{ + int i; + + memset(&priv(dev)->stats, 0, sizeof(struct net_device_stats)); + + /* Reset the chip */ + ether3_outw(CFG2_RESET, REG_CONFIG2); + udelay(4); + + priv(dev)->regs.command = 0; + ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND); + while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON)) + barrier(); + + ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1); + for (i = 0; i < 6; i++) + ether3_outb(dev->dev_addr[i], REG_BUFWIN); + + priv(dev)->tx_head = 0; + priv(dev)->tx_tail = 0; + priv(dev)->regs.config2 |= CFG2_CTRLO; + priv(dev)->rx_head = RX_START; + + ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1); + ether3_outw((TX_END>>8) - 1, REG_BUFWIN); + ether3_outw(priv(dev)->rx_head, REG_RECVPTR); + ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND); + ether3_outw(0, REG_TRANSMITPTR); + ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); + ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); + + ether3_setbuffer(dev, buffer_write, 0); + ether3_writelong(dev, 0); + + priv(dev)->regs.command = CMD_ENINTRX | CMD_ENINTTX; + ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND); +} + +static inline int +ether3_probe_bus_8(struct net_device *dev, int val) +{ + int write_low, write_high, read_low, read_high; + + write_low = val & 255; + write_high = val >> 8; + + printk(KERN_DEBUG "ether3_probe: write8 [%02X:%02X]", write_high, write_low); + + ether3_outb(write_low, REG_RECVPTR); + ether3_outb(write_high, REG_RECVPTR + 4); + + read_low = ether3_inb(REG_RECVPTR); + read_high = ether3_inb(REG_RECVPTR + 4); + + printk(", read8 [%02X:%02X]\n", read_high, read_low); + + return read_low == write_low && read_high == write_high; +} + +static inline int +ether3_probe_bus_16(struct net_device *dev, int val) +{ + int read_val; + + ether3_outw(val, REG_RECVPTR); + read_val = ether3_inw(REG_RECVPTR); + + printk(KERN_DEBUG "ether3_probe: write16 [%04X], read16 [%04X]\n", val, read_val); + + return read_val == val; +} + +/* + * Open/initialize the board. This is called (in the current kernel) + * sometime after booting when the 'ifconfig' program is run. + * + * This routine should set everything up anew at each open, even + * registers that "should" only need to be set once at boot, so that + * there is non-reboot way to recover if something goes wrong. + */ +static int +ether3_open(struct net_device *dev) +{ + if (!is_valid_ether_addr(dev->dev_addr)) { + printk(KERN_WARNING "%s: invalid ethernet MAC address\n", + dev->name); + return -EINVAL; + } + + if (request_irq(dev->irq, ether3_interrupt, 0, "ether3", dev)) + return -EAGAIN; + + ether3_init_for_open(dev); + + netif_start_queue(dev); + + return 0; +} + +/* + * The inverse routine to ether3_open(). + */ +static int +ether3_close(struct net_device *dev) +{ + netif_stop_queue(dev); + + disable_irq(dev->irq); + + ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND); + priv(dev)->regs.command = 0; + while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON)) + barrier(); + ether3_outb(0x80, REG_CONFIG2 + 4); + ether3_outw(0, REG_COMMAND); + + free_irq(dev->irq, dev); + + return 0; +} + +/* + * Get the current statistics. This may be called with the card open or + * closed. + */ +static struct net_device_stats *ether3_getstats(struct net_device *dev) +{ + return &priv(dev)->stats; +} + +/* + * Set or clear promiscuous/multicast mode filter for this adaptor. + * + * We don't attempt any packet filtering. The card may have a SEEQ 8004 + * in which does not have the other ethernet address registers present... + */ +static void ether3_setmulticastlist(struct net_device *dev) +{ + priv(dev)->regs.config1 &= ~CFG1_RECVPROMISC; + + if (dev->flags & IFF_PROMISC) { + /* promiscuous mode */ + priv(dev)->regs.config1 |= CFG1_RECVPROMISC; + } else if (dev->flags & IFF_ALLMULTI) { + priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI; + } else + priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD; + + ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); +} + +static void ether3_timeout(struct net_device *dev) +{ + unsigned long flags; + + del_timer(&priv(dev)->timer); + + local_irq_save(flags); + printk(KERN_ERR "%s: transmit timed out, network cable problem?\n", dev->name); + printk(KERN_ERR "%s: state: { status=%04X cfg1=%04X cfg2=%04X }\n", dev->name, + ether3_inw(REG_STATUS), ether3_inw(REG_CONFIG1), ether3_inw(REG_CONFIG2)); + printk(KERN_ERR "%s: { rpr=%04X rea=%04X tpr=%04X }\n", dev->name, + ether3_inw(REG_RECVPTR), ether3_inw(REG_RECVEND), ether3_inw(REG_TRANSMITPTR)); + printk(KERN_ERR "%s: tx head=%X tx tail=%X\n", dev->name, + priv(dev)->tx_head, priv(dev)->tx_tail); + ether3_setbuffer(dev, buffer_read, priv(dev)->tx_tail); + printk(KERN_ERR "%s: packet status = %08X\n", dev->name, ether3_readlong(dev)); + local_irq_restore(flags); + + priv(dev)->regs.config2 |= CFG2_CTRLO; + priv(dev)->stats.tx_errors += 1; + ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); + priv(dev)->tx_head = priv(dev)->tx_tail = 0; + + netif_wake_queue(dev); +} + +/* + * Transmit a packet + */ +static int +ether3_sendpacket(struct sk_buff *skb, struct net_device *dev) +{ + unsigned long flags; + unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; + unsigned int ptr, next_ptr; + + if (priv(dev)->broken) { + dev_kfree_skb(skb); + priv(dev)->stats.tx_dropped ++; + netif_start_queue(dev); + return 0; + } + + length = (length + 1) & ~1; + if (length != skb->len) { + skb = skb_padto(skb, length); + if (skb == NULL) + goto out; + } + + next_ptr = (priv(dev)->tx_head + 1) & 15; + + local_irq_save(flags); + + if (priv(dev)->tx_tail == next_ptr) { + local_irq_restore(flags); + return 1; /* unable to queue */ + } + + dev->trans_start = jiffies; + ptr = 0x600 * priv(dev)->tx_head; + priv(dev)->tx_head = next_ptr; + next_ptr *= 0x600; + +#define TXHDR_FLAGS (TXHDR_TRANSMIT|TXHDR_CHAINCONTINUE|TXHDR_DATAFOLLOWS|TXHDR_ENSUCCESS) + + ether3_setbuffer(dev, buffer_write, next_ptr); + ether3_writelong(dev, 0); + ether3_setbuffer(dev, buffer_write, ptr); + ether3_writelong(dev, 0); + ether3_writebuffer(dev, skb->data, length); + ether3_writeword(dev, htons(next_ptr)); + ether3_writeword(dev, TXHDR_CHAINCONTINUE >> 16); + ether3_setbuffer(dev, buffer_write, ptr); + ether3_writeword(dev, htons((ptr + length + 4))); + ether3_writeword(dev, TXHDR_FLAGS >> 16); + ether3_ledon(dev); + + if (!(ether3_inw(REG_STATUS) & STAT_TXON)) { + ether3_outw(ptr, REG_TRANSMITPTR); + ether3_outw(priv(dev)->regs.command | CMD_TXON, REG_COMMAND); + } + + next_ptr = (priv(dev)->tx_head + 1) & 15; + local_irq_restore(flags); + + dev_kfree_skb(skb); + + if (priv(dev)->tx_tail == next_ptr) + netif_stop_queue(dev); + + out: + return 0; +} + +static irqreturn_t +ether3_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *)dev_id; + unsigned int status, handled = IRQ_NONE; + +#if NET_DEBUG > 1 + if(net_debug & DEBUG_INT) + printk("eth3irq: %d ", irq); +#endif + + status = ether3_inw(REG_STATUS); + + if (status & STAT_INTRX) { + ether3_outw(CMD_ACKINTRX | priv(dev)->regs.command, REG_COMMAND); + ether3_rx(dev, 12); + handled = IRQ_HANDLED; + } + + if (status & STAT_INTTX) { + ether3_outw(CMD_ACKINTTX | priv(dev)->regs.command, REG_COMMAND); + ether3_tx(dev); + handled = IRQ_HANDLED; + } + +#if NET_DEBUG > 1 + if(net_debug & DEBUG_INT) + printk("done\n"); +#endif + return handled; +} + +/* + * If we have a good packet(s), get it/them out of the buffers. + */ +static int ether3_rx(struct net_device *dev, unsigned int maxcnt) +{ + unsigned int next_ptr = priv(dev)->rx_head, received = 0; + + ether3_ledon(dev); + + do { + unsigned int this_ptr, status; + unsigned char addrs[16]; + + /* + * read the first 16 bytes from the buffer. + * This contains the status bytes etc and ethernet addresses, + * and we also check the source ethernet address to see if + * it originated from us. + */ + { + unsigned int temp_ptr; + ether3_setbuffer(dev, buffer_read, next_ptr); + temp_ptr = ether3_readword(dev); + status = ether3_readword(dev); + if ((status & (RXSTAT_DONE | RXHDR_CHAINCONTINUE | RXHDR_RECEIVE)) != + (RXSTAT_DONE | RXHDR_CHAINCONTINUE) || !temp_ptr) + break; + + this_ptr = next_ptr + 4; + next_ptr = ntohs(temp_ptr); + } + ether3_setbuffer(dev, buffer_read, this_ptr); + ether3_readbuffer(dev, addrs+2, 12); + +if (next_ptr < RX_START || next_ptr >= RX_END) { + int i; + printk("%s: bad next pointer @%04X: ", dev->name, priv(dev)->rx_head); + printk("%02X %02X %02X %02X ", next_ptr >> 8, next_ptr & 255, status & 255, status >> 8); + for (i = 2; i < 14; i++) + printk("%02X ", addrs[i]); + printk("\n"); + next_ptr = priv(dev)->rx_head; + break; +} + /* + * ignore our own packets... + */ + if (!(*(unsigned long *)&dev->dev_addr[0] ^ *(unsigned long *)&addrs[2+6]) && + !(*(unsigned short *)&dev->dev_addr[4] ^ *(unsigned short *)&addrs[2+10])) { + maxcnt ++; /* compensate for loopedback packet */ + ether3_outw(next_ptr >> 8, REG_RECVEND); + } else + if (!(status & (RXSTAT_OVERSIZE|RXSTAT_CRCERROR|RXSTAT_DRIBBLEERROR|RXSTAT_SHORTPACKET))) { + unsigned int length = next_ptr - this_ptr; + struct sk_buff *skb; + + if (next_ptr <= this_ptr) + length += RX_END - RX_START; + + skb = dev_alloc_skb(length + 2); + if (skb) { + unsigned char *buf; + + skb->dev = dev; + skb_reserve(skb, 2); + buf = skb_put(skb, length); + ether3_readbuffer(dev, buf + 12, length - 12); + ether3_outw(next_ptr >> 8, REG_RECVEND); + *(unsigned short *)(buf + 0) = *(unsigned short *)(addrs + 2); + *(unsigned long *)(buf + 2) = *(unsigned long *)(addrs + 4); + *(unsigned long *)(buf + 6) = *(unsigned long *)(addrs + 8); + *(unsigned short *)(buf + 10) = *(unsigned short *)(addrs + 12); + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + received ++; + } else + goto dropping; + } else { + struct net_device_stats *stats = &priv(dev)->stats; + ether3_outw(next_ptr >> 8, REG_RECVEND); + if (status & RXSTAT_OVERSIZE) stats->rx_over_errors ++; + if (status & RXSTAT_CRCERROR) stats->rx_crc_errors ++; + if (status & RXSTAT_DRIBBLEERROR) stats->rx_fifo_errors ++; + if (status & RXSTAT_SHORTPACKET) stats->rx_length_errors ++; + stats->rx_errors++; + } + } + while (-- maxcnt); + +done: + priv(dev)->stats.rx_packets += received; + priv(dev)->rx_head = next_ptr; + /* + * If rx went off line, then that means that the buffer may be full. We + * have dropped at least one packet. + */ + if (!(ether3_inw(REG_STATUS) & STAT_RXON)) { + priv(dev)->stats.rx_dropped ++; + ether3_outw(next_ptr, REG_RECVPTR); + ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND); + } + + return maxcnt; + +dropping:{ + static unsigned long last_warned; + + ether3_outw(next_ptr >> 8, REG_RECVEND); + /* + * Don't print this message too many times... + */ + if (time_after(jiffies, last_warned + 10 * HZ)) { + last_warned = jiffies; + printk("%s: memory squeeze, dropping packet.\n", dev->name); + } + priv(dev)->stats.rx_dropped ++; + goto done; + } +} + +/* + * Update stats for the transmitted packet(s) + */ +static void ether3_tx(struct net_device *dev) +{ + unsigned int tx_tail = priv(dev)->tx_tail; + int max_work = 14; + + do { + unsigned long status; + + /* + * Read the packet header + */ + ether3_setbuffer(dev, buffer_read, tx_tail * 0x600); + status = ether3_readlong(dev); + + /* + * Check to see if this packet has been transmitted + */ + if ((status & (TXSTAT_DONE | TXHDR_TRANSMIT)) != + (TXSTAT_DONE | TXHDR_TRANSMIT)) + break; + + /* + * Update errors + */ + if (!(status & (TXSTAT_BABBLED | TXSTAT_16COLLISIONS))) + priv(dev)->stats.tx_packets++; + else { + priv(dev)->stats.tx_errors ++; + if (status & TXSTAT_16COLLISIONS) + priv(dev)->stats.collisions += 16; + if (status & TXSTAT_BABBLED) + priv(dev)->stats.tx_fifo_errors ++; + } + + tx_tail = (tx_tail + 1) & 15; + } while (--max_work); + + if (priv(dev)->tx_tail != tx_tail) { + priv(dev)->tx_tail = tx_tail; + netif_wake_queue(dev); + } +} + +static void __init ether3_banner(void) +{ + static unsigned version_printed = 0; + + if (net_debug && version_printed++ == 0) + printk(KERN_INFO "%s", version); +} + +static int __devinit +ether3_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + const struct ether3_data *data = id->data; + struct net_device *dev; + int i, bus_type, ret; + + ether3_banner(); + + ret = ecard_request_resources(ec); + if (ret) + goto out; + + dev = alloc_etherdev(sizeof(struct dev_priv)); + if (!dev) { + ret = -ENOMEM; + goto release; + } + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &ec->dev); + + priv(dev)->base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC), + ecard_resource_len(ec, ECARD_RES_MEMC)); + if (!priv(dev)->base) { + ret = -ENOMEM; + goto free; + } + + ec->irqaddr = priv(dev)->base + data->base_offset; + ec->irqmask = 0xf0; + + priv(dev)->seeq = priv(dev)->base + data->base_offset; + dev->irq = ec->irq; + + ether3_addr(dev->dev_addr, ec); + + init_timer(&priv(dev)->timer); + + /* Reset card... + */ + ether3_outb(0x80, REG_CONFIG2 + 4); + bus_type = BUS_UNKNOWN; + udelay(4); + + /* Test using Receive Pointer (16-bit register) to find out + * how the ether3 is connected to the bus... + */ + if (ether3_probe_bus_8(dev, 0x100) && + ether3_probe_bus_8(dev, 0x201)) + bus_type = BUS_8; + + if (bus_type == BUS_UNKNOWN && + ether3_probe_bus_16(dev, 0x101) && + ether3_probe_bus_16(dev, 0x201)) + bus_type = BUS_16; + + switch (bus_type) { + case BUS_UNKNOWN: + printk(KERN_ERR "%s: unable to identify bus width\n", dev->name); + ret = -ENODEV; + goto free; + + case BUS_8: + printk(KERN_ERR "%s: %s found, but is an unsupported " + "8-bit card\n", dev->name, data->name); + ret = -ENODEV; + goto free; + + default: + break; + } + + if (ether3_init_2(dev)) { + ret = -ENODEV; + goto free; + } + + dev->open = ether3_open; + dev->stop = ether3_close; + dev->hard_start_xmit = ether3_sendpacket; + dev->get_stats = ether3_getstats; + dev->set_multicast_list = ether3_setmulticastlist; + dev->tx_timeout = ether3_timeout; + dev->watchdog_timeo = 5 * HZ / 100; + + ret = register_netdev(dev); + if (ret) + goto free; + + printk("%s: %s in slot %d, ", dev->name, data->name, ec->slot_no); + for (i = 0; i < 6; i++) + printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':'); + + ecard_set_drvdata(ec, dev); + return 0; + + free: + if (priv(dev)->base) + iounmap(priv(dev)->base); + free_netdev(dev); + release: + ecard_release_resources(ec); + out: + return ret; +} + +static void __devexit ether3_remove(struct expansion_card *ec) +{ + struct net_device *dev = ecard_get_drvdata(ec); + + ecard_set_drvdata(ec, NULL); + + unregister_netdev(dev); + iounmap(priv(dev)->base); + free_netdev(dev); + ecard_release_resources(ec); +} + +static struct ether3_data ether3 = { + .name = "ether3", + .base_offset = 0, +}; + +static struct ether3_data etherb = { + .name = "etherb", + .base_offset = 0x800, +}; + +static const struct ecard_id ether3_ids[] = { + { MANU_ANT2, PROD_ANT_ETHER3, ðer3 }, + { MANU_ANT, PROD_ANT_ETHER3, ðer3 }, + { MANU_ANT, PROD_ANT_ETHERB, ðerb }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver ether3_driver = { + .probe = ether3_probe, + .remove = __devexit_p(ether3_remove), + .id_table = ether3_ids, + .drv = { + .name = "ether3", + }, +}; + +static int __init ether3_init(void) +{ + return ecard_register_driver(ðer3_driver); +} + +static void __exit ether3_exit(void) +{ + ecard_remove_driver(ðer3_driver); +} + +module_init(ether3_init); +module_exit(ether3_exit); + +MODULE_LICENSE("GPL"); |