diff options
Diffstat (limited to 'drivers/net/arm/ks8695net.c')
-rw-r--r-- | drivers/net/arm/ks8695net.c | 288 |
1 files changed, 95 insertions, 193 deletions
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c index 54c6d849cf25..62d6f88cbab5 100644 --- a/drivers/net/arm/ks8695net.c +++ b/drivers/net/arm/ks8695net.c @@ -854,12 +854,12 @@ ks8695_set_msglevel(struct net_device *ndev, u32 value) } /** - * ks8695_get_settings - Get device-specific settings. + * ks8695_wan_get_settings - Get device-specific settings. * @ndev: The network device to read settings from * @cmd: The ethtool structure to read into */ static int -ks8695_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd) +ks8695_wan_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; @@ -870,69 +870,50 @@ ks8695_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd) SUPPORTED_TP | SUPPORTED_MII); cmd->transceiver = XCVR_INTERNAL; - /* Port specific extras */ - switch (ksp->dtype) { - case KS8695_DTYPE_HPNA: - cmd->phy_address = 0; - /* not supported for HPNA */ - cmd->autoneg = AUTONEG_DISABLE; + cmd->advertising = ADVERTISED_TP | ADVERTISED_MII; + cmd->port = PORT_MII; + cmd->supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause); + cmd->phy_address = 0; - /* BUG: Erm, dtype hpna implies no phy regs */ - /* - ctrl = readl(KS8695_MISC_VA + KS8695_HMC); - cmd->speed = (ctrl & HMC_HSS) ? SPEED_100 : SPEED_10; - cmd->duplex = (ctrl & HMC_HDS) ? DUPLEX_FULL : DUPLEX_HALF; - */ - return -EOPNOTSUPP; - case KS8695_DTYPE_WAN: - cmd->advertising = ADVERTISED_TP | ADVERTISED_MII; - cmd->port = PORT_MII; - cmd->supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause); - cmd->phy_address = 0; + ctrl = readl(ksp->phyiface_regs + KS8695_WMC); + if ((ctrl & WMC_WAND) == 0) { + /* auto-negotiation is enabled */ + cmd->advertising |= ADVERTISED_Autoneg; + if (ctrl & WMC_WANA100F) + cmd->advertising |= ADVERTISED_100baseT_Full; + if (ctrl & WMC_WANA100H) + cmd->advertising |= ADVERTISED_100baseT_Half; + if (ctrl & WMC_WANA10F) + cmd->advertising |= ADVERTISED_10baseT_Full; + if (ctrl & WMC_WANA10H) + cmd->advertising |= ADVERTISED_10baseT_Half; + if (ctrl & WMC_WANAP) + cmd->advertising |= ADVERTISED_Pause; + cmd->autoneg = AUTONEG_ENABLE; + + cmd->speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10; + cmd->duplex = (ctrl & WMC_WDS) ? + DUPLEX_FULL : DUPLEX_HALF; + } else { + /* auto-negotiation is disabled */ + cmd->autoneg = AUTONEG_DISABLE; - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - if ((ctrl & WMC_WAND) == 0) { - /* auto-negotiation is enabled */ - cmd->advertising |= ADVERTISED_Autoneg; - if (ctrl & WMC_WANA100F) - cmd->advertising |= ADVERTISED_100baseT_Full; - if (ctrl & WMC_WANA100H) - cmd->advertising |= ADVERTISED_100baseT_Half; - if (ctrl & WMC_WANA10F) - cmd->advertising |= ADVERTISED_10baseT_Full; - if (ctrl & WMC_WANA10H) - cmd->advertising |= ADVERTISED_10baseT_Half; - if (ctrl & WMC_WANAP) - cmd->advertising |= ADVERTISED_Pause; - cmd->autoneg = AUTONEG_ENABLE; - - cmd->speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10; - cmd->duplex = (ctrl & WMC_WDS) ? - DUPLEX_FULL : DUPLEX_HALF; - } else { - /* auto-negotiation is disabled */ - cmd->autoneg = AUTONEG_DISABLE; - - cmd->speed = (ctrl & WMC_WANF100) ? - SPEED_100 : SPEED_10; - cmd->duplex = (ctrl & WMC_WANFF) ? - DUPLEX_FULL : DUPLEX_HALF; - } - break; - case KS8695_DTYPE_LAN: - return -EOPNOTSUPP; + cmd->speed = (ctrl & WMC_WANF100) ? + SPEED_100 : SPEED_10; + cmd->duplex = (ctrl & WMC_WANFF) ? + DUPLEX_FULL : DUPLEX_HALF; } return 0; } /** - * ks8695_set_settings - Set device-specific settings. + * ks8695_wan_set_settings - Set device-specific settings. * @ndev: The network device to configure * @cmd: The settings to configure */ static int -ks8695_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd) +ks8695_wan_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; @@ -956,171 +937,85 @@ ks8695_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd) ADVERTISED_100baseT_Full)) == 0) return -EINVAL; - switch (ksp->dtype) { - case KS8695_DTYPE_HPNA: - /* HPNA does not support auto-negotiation. */ - return -EINVAL; - case KS8695_DTYPE_WAN: - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - - ctrl &= ~(WMC_WAND | WMC_WANA100F | WMC_WANA100H | - WMC_WANA10F | WMC_WANA10H); - if (cmd->advertising & ADVERTISED_100baseT_Full) - ctrl |= WMC_WANA100F; - if (cmd->advertising & ADVERTISED_100baseT_Half) - ctrl |= WMC_WANA100H; - if (cmd->advertising & ADVERTISED_10baseT_Full) - ctrl |= WMC_WANA10F; - if (cmd->advertising & ADVERTISED_10baseT_Half) - ctrl |= WMC_WANA10H; - - /* force a re-negotiation */ - ctrl |= WMC_WANR; - writel(ctrl, ksp->phyiface_regs + KS8695_WMC); - break; - case KS8695_DTYPE_LAN: - return -EOPNOTSUPP; - } + ctrl = readl(ksp->phyiface_regs + KS8695_WMC); + ctrl &= ~(WMC_WAND | WMC_WANA100F | WMC_WANA100H | + WMC_WANA10F | WMC_WANA10H); + if (cmd->advertising & ADVERTISED_100baseT_Full) + ctrl |= WMC_WANA100F; + if (cmd->advertising & ADVERTISED_100baseT_Half) + ctrl |= WMC_WANA100H; + if (cmd->advertising & ADVERTISED_10baseT_Full) + ctrl |= WMC_WANA10F; + if (cmd->advertising & ADVERTISED_10baseT_Half) + ctrl |= WMC_WANA10H; + + /* force a re-negotiation */ + ctrl |= WMC_WANR; + writel(ctrl, ksp->phyiface_regs + KS8695_WMC); } else { - switch (ksp->dtype) { - case KS8695_DTYPE_HPNA: - /* BUG: dtype_hpna implies no phy registers */ - /* - ctrl = __raw_readl(KS8695_MISC_VA + KS8695_HMC); - - ctrl &= ~(HMC_HSS | HMC_HDS); - if (cmd->speed == SPEED_100) - ctrl |= HMC_HSS; - if (cmd->duplex == DUPLEX_FULL) - ctrl |= HMC_HDS; - - __raw_writel(ctrl, KS8695_MISC_VA + KS8695_HMC); - */ - return -EOPNOTSUPP; - case KS8695_DTYPE_WAN: - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - - /* disable auto-negotiation */ - ctrl |= WMC_WAND; - ctrl &= ~(WMC_WANF100 | WMC_WANFF); - - if (cmd->speed == SPEED_100) - ctrl |= WMC_WANF100; - if (cmd->duplex == DUPLEX_FULL) - ctrl |= WMC_WANFF; - - writel(ctrl, ksp->phyiface_regs + KS8695_WMC); - break; - case KS8695_DTYPE_LAN: - return -EOPNOTSUPP; - } + ctrl = readl(ksp->phyiface_regs + KS8695_WMC); + + /* disable auto-negotiation */ + ctrl |= WMC_WAND; + ctrl &= ~(WMC_WANF100 | WMC_WANFF); + + if (cmd->speed == SPEED_100) + ctrl |= WMC_WANF100; + if (cmd->duplex == DUPLEX_FULL) + ctrl |= WMC_WANFF; + + writel(ctrl, ksp->phyiface_regs + KS8695_WMC); } return 0; } /** - * ks8695_nwayreset - Restart the autonegotiation on the port. + * ks8695_wan_nwayreset - Restart the autonegotiation on the port. * @ndev: The network device to restart autoneotiation on */ static int -ks8695_nwayreset(struct net_device *ndev) +ks8695_wan_nwayreset(struct net_device *ndev) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; - switch (ksp->dtype) { - case KS8695_DTYPE_HPNA: - /* No phy means no autonegotiation on hpna */ - return -EINVAL; - case KS8695_DTYPE_WAN: - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - - if ((ctrl & WMC_WAND) == 0) - writel(ctrl | WMC_WANR, - ksp->phyiface_regs + KS8695_WMC); - else - /* auto-negotiation not enabled */ - return -EINVAL; - break; - case KS8695_DTYPE_LAN: - return -EOPNOTSUPP; - } - - return 0; -} + ctrl = readl(ksp->phyiface_regs + KS8695_WMC); -/** - * ks8695_get_link - Retrieve link status of network interface - * @ndev: The network interface to retrive the link status of. - */ -static u32 -ks8695_get_link(struct net_device *ndev) -{ - struct ks8695_priv *ksp = netdev_priv(ndev); - u32 ctrl; + if ((ctrl & WMC_WAND) == 0) + writel(ctrl | WMC_WANR, + ksp->phyiface_regs + KS8695_WMC); + else + /* auto-negotiation not enabled */ + return -EINVAL; - switch (ksp->dtype) { - case KS8695_DTYPE_HPNA: - /* HPNA always has link */ - return 1; - case KS8695_DTYPE_WAN: - /* WAN we can read the PHY for */ - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - return ctrl & WMC_WLS; - case KS8695_DTYPE_LAN: - return -EOPNOTSUPP; - } return 0; } /** - * ks8695_get_pause - Retrieve network pause/flow-control advertising + * ks8695_wan_get_pause - Retrieve network pause/flow-control advertising * @ndev: The device to retrieve settings from * @param: The structure to fill out with the information */ static void -ks8695_get_pause(struct net_device *ndev, struct ethtool_pauseparam *param) +ks8695_wan_get_pause(struct net_device *ndev, struct ethtool_pauseparam *param) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; - switch (ksp->dtype) { - case KS8695_DTYPE_HPNA: - /* No phy link on hpna to configure */ - return; - case KS8695_DTYPE_WAN: - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - - /* advertise Pause */ - param->autoneg = (ctrl & WMC_WANAP); + ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - /* current Rx Flow-control */ - ctrl = ks8695_readreg(ksp, KS8695_DRXC); - param->rx_pause = (ctrl & DRXC_RFCE); + /* advertise Pause */ + param->autoneg = (ctrl & WMC_WANAP); - /* current Tx Flow-control */ - ctrl = ks8695_readreg(ksp, KS8695_DTXC); - param->tx_pause = (ctrl & DTXC_TFCE); - break; - case KS8695_DTYPE_LAN: - /* The LAN's "phy" is a direct-attached switch */ - return; - } -} + /* current Rx Flow-control */ + ctrl = ks8695_readreg(ksp, KS8695_DRXC); + param->rx_pause = (ctrl & DRXC_RFCE); -/** - * ks8695_set_pause - Configure pause/flow-control - * @ndev: The device to configure - * @param: The pause parameters to set - * - * TODO: Implement this - */ -static int -ks8695_set_pause(struct net_device *ndev, struct ethtool_pauseparam *param) -{ - return -EOPNOTSUPP; + /* current Tx Flow-control */ + ctrl = ks8695_readreg(ksp, KS8695_DTXC); + param->tx_pause = (ctrl & DTXC_TFCE); } /** @@ -1140,12 +1035,17 @@ ks8695_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) static const struct ethtool_ops ks8695_ethtool_ops = { .get_msglevel = ks8695_get_msglevel, .set_msglevel = ks8695_set_msglevel, - .get_settings = ks8695_get_settings, - .set_settings = ks8695_set_settings, - .nway_reset = ks8695_nwayreset, - .get_link = ks8695_get_link, - .get_pauseparam = ks8695_get_pause, - .set_pauseparam = ks8695_set_pause, + .get_drvinfo = ks8695_get_drvinfo, +}; + +static const struct ethtool_ops ks8695_wan_ethtool_ops = { + .get_msglevel = ks8695_get_msglevel, + .set_msglevel = ks8695_set_msglevel, + .get_settings = ks8695_wan_get_settings, + .set_settings = ks8695_wan_set_settings, + .nway_reset = ks8695_wan_nwayreset, + .get_link = ethtool_op_get_link, + .get_pauseparam = ks8695_wan_get_pause, .get_drvinfo = ks8695_get_drvinfo, }; @@ -1541,7 +1441,6 @@ ks8695_probe(struct platform_device *pdev) /* driver system setup */ ndev->netdev_ops = &ks8695_netdev_ops; - SET_ETHTOOL_OPS(ndev, &ks8695_ethtool_ops); ndev->watchdog_timeo = msecs_to_jiffies(watchdog); netif_napi_add(ndev, &ksp->napi, ks8695_poll, NAPI_WEIGHT); @@ -1608,12 +1507,15 @@ ks8695_probe(struct platform_device *pdev) if (ksp->phyiface_regs && ksp->link_irq == -1) { ks8695_init_switch(ksp); ksp->dtype = KS8695_DTYPE_LAN; + SET_ETHTOOL_OPS(ndev, &ks8695_ethtool_ops); } else if (ksp->phyiface_regs && ksp->link_irq != -1) { ks8695_init_wan_phy(ksp); ksp->dtype = KS8695_DTYPE_WAN; + SET_ETHTOOL_OPS(ndev, &ks8695_wan_ethtool_ops); } else { /* No initialisation since HPNA does not have a PHY */ ksp->dtype = KS8695_DTYPE_HPNA; + SET_ETHTOOL_OPS(ndev, &ks8695_ethtool_ops); } /* And bring up the net_device with the net core */ |