summaryrefslogtreecommitdiff
path: root/drivers/net/atlx
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/atlx')
-rw-r--r--drivers/net/atlx/Makefile1
-rw-r--r--drivers/net/atlx/atl1.c (renamed from drivers/net/atlx/atl1_main.c)1544
-rw-r--r--drivers/net/atlx/atl1.h603
-rw-r--r--drivers/net/atlx/atl1_ethtool.c505
-rw-r--r--drivers/net/atlx/atl1_hw.c720
-rw-r--r--drivers/net/atlx/atl1_hw.h946
-rw-r--r--drivers/net/atlx/atl1_param.c203
-rw-r--r--drivers/net/atlx/atlx.c433
-rw-r--r--drivers/net/atlx/atlx.h506
9 files changed, 2751 insertions, 2710 deletions
diff --git a/drivers/net/atlx/Makefile b/drivers/net/atlx/Makefile
index a6b707e4e69e..ca45553a040d 100644
--- a/drivers/net/atlx/Makefile
+++ b/drivers/net/atlx/Makefile
@@ -1,2 +1 @@
obj-$(CONFIG_ATL1) += atl1.o
-atl1-y += atl1_main.o atl1_hw.o atl1_ethtool.o atl1_param.o
diff --git a/drivers/net/atlx/atl1_main.c b/drivers/net/atlx/atl1.c
index 9200ee59d854..a84c97c75c75 100644
--- a/drivers/net/atlx/atl1_main.c
+++ b/drivers/net/atlx/atl1.c
@@ -1,6 +1,6 @@
/*
* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
- * Copyright(c) 2006 Chris Snook <csnook@redhat.com>
+ * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
* Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
*
* Derived from Intel e1000 driver
@@ -50,51 +50,46 @@
* SMP torture testing
*/
-#include <linux/types.h>
-#include <linux/netdevice.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/skbuff.h>
+#include <asm/atomic.h>
+#include <asm/byteorder.h>
+
+#include <linux/compiler.h>
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
-#include <linux/if_vlan.h>
-#include <linux/if_ether.h>
-#include <linux/irqreturn.h>
-#include <linux/workqueue.h>
-#include <linux/timer.h>
-#include <linux/jiffies.h>
#include <linux/hardirq.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/in.h>
#include <linux/interrupt.h>
+#include <linux/ip.h>
#include <linux/irqflags.h>
-#include <linux/dma-mapping.h>
+#include <linux/irqreturn.h>
+#include <linux/jiffies.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/net.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
#include <linux/pm.h>
-#include <linux/in.h>
-#include <linux/ip.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
#include <linux/tcp.h>
-#include <linux/compiler.h>
-#include <linux/delay.h>
-#include <linux/mii.h>
-#include <net/checksum.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
-#include <asm/atomic.h>
-#include <asm/byteorder.h>
+#include <net/checksum.h>
#include "atl1.h"
-#define DRIVER_VERSION "2.0.7"
-
-char atl1_driver_name[] = "atl1";
-static const char atl1_driver_string[] = "Attansic L1 Ethernet Network Driver";
-static const char atl1_copyright[] = "Copyright(c) 2005-2006 Attansic Corporation.";
-char atl1_driver_version[] = DRIVER_VERSION;
-
-MODULE_AUTHOR
- ("Attansic Corporation <xiong_huang@attansic.com>, Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
-MODULE_DESCRIPTION("Attansic 1000M Ethernet Network Driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRIVER_VERSION);
+/* Temporary hack for merging atl1 and atl2 */
+#include "atlx.c"
/*
* atl1_pci_tbl - PCI Device ID Table
@@ -104,7 +99,6 @@ static const struct pci_device_id atl1_pci_tbl[] = {
/* required last entry */
{0,}
};
-
MODULE_DEVICE_TABLE(pci, atl1_pci_tbl);
/*
@@ -125,7 +119,7 @@ static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
adapter->wol = 0;
adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7;
- adapter->ict = 50000; /* 100ms */
+ adapter->ict = 50000; /* 100ms */
adapter->link_speed = SPEED_0; /* hardware init */
adapter->link_duplex = FULL_DUPLEX;
@@ -206,24 +200,6 @@ static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
}
/*
- * atl1_ioctl -
- * @netdev:
- * @ifreq:
- * @cmd:
- */
-static int atl1_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-{
- switch (cmd) {
- case SIOCGMIIPHY:
- case SIOCGMIIREG:
- case SIOCSMIIREG:
- return atl1_mii_ioctl(netdev, ifr, cmd);
- default:
- return -EOPNOTSUPP;
- }
-}
-
-/*
* atl1_setup_mem_resources - allocate Tx / RX descriptor resources
* @adapter: board private structure
*
@@ -248,7 +224,8 @@ s32 atl1_setup_ring_resources(struct atl1_adapter *adapter)
rfd_ring->buffer_info =
(struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count);
- /* real ring DMA buffer
+ /*
+ * real ring DMA buffer
* each ring/block may need up to 8 bytes for alignment, hence the
* additional 40 bytes tacked onto the end.
*/
@@ -307,7 +284,7 @@ s32 atl1_setup_ring_resources(struct atl1_adapter *adapter)
((u8 *) adapter->cmb.cmb +
(sizeof(struct coals_msg_block) + offset));
- return ATL1_SUCCESS;
+ return 0;
err_nomem:
kfree(tpd_ring->buffer_info);
@@ -481,31 +458,6 @@ static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter)
iowrite32(value, hw->hw_addr + REG_MAC_CTRL);
}
-/*
- * atl1_set_mac - Change the Ethernet Address of the NIC
- * @netdev: network interface device structure
- * @p: pointer to an address structure
- *
- * Returns 0 on success, negative on failure
- */
-static int atl1_set_mac(struct net_device *netdev, void *p)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct sockaddr *addr = p;
-
- if (netif_running(netdev))
- return -EBUSY;
-
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
- memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
-
- atl1_set_mac_addr(&adapter->hw);
- return 0;
-}
-
static u32 atl1_check_link(struct atl1_adapter *adapter)
{
struct atl1_hw *hw = &adapter->hw;
@@ -517,14 +469,16 @@ static u32 atl1_check_link(struct atl1_adapter *adapter)
/* MII_BMSR must read twice */
atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
- if (!(phy_data & BMSR_LSTATUS)) { /* link down */
- if (netif_carrier_ok(netdev)) { /* old link state: Up */
+ if (!(phy_data & BMSR_LSTATUS)) {
+ /* link down */
+ if (netif_carrier_ok(netdev)) {
+ /* old link state: Up */
dev_info(&adapter->pdev->dev, "link is down\n");
adapter->link_speed = SPEED_0;
netif_carrier_off(netdev);
netif_stop_queue(netdev);
}
- return ATL1_SUCCESS;
+ return 0;
}
/* Link Up */
@@ -568,14 +522,15 @@ static u32 atl1_check_link(struct atl1_adapter *adapter)
adapter->link_duplex == FULL_DUPLEX ?
"full duplex" : "half duplex");
}
- if (!netif_carrier_ok(netdev)) { /* Link down -> Up */
+ if (!netif_carrier_ok(netdev)) {
+ /* Link down -> Up */
netif_carrier_on(netdev);
netif_wake_queue(netdev);
}
- return ATL1_SUCCESS;
+ return 0;
}
- /* change orignal link status */
+ /* change original link status */
if (netif_carrier_ok(netdev)) {
adapter->link_speed = SPEED_0;
netif_carrier_off(netdev);
@@ -596,12 +551,13 @@ static u32 atl1_check_link(struct atl1_adapter *adapter)
phy_data =
MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
break;
- default: /* MEDIA_TYPE_10M_HALF: */
+ default:
+ /* MEDIA_TYPE_10M_HALF: */
phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
break;
}
atl1_write_phy_reg(hw, MII_BMCR, phy_data);
- return ATL1_SUCCESS;
+ return 0;
}
/* auto-neg, insert timer to re-config phy */
@@ -610,71 +566,7 @@ static u32 atl1_check_link(struct atl1_adapter *adapter)
mod_timer(&adapter->phy_config_timer, jiffies + 3 * HZ);
}
- return ATL1_SUCCESS;
-}
-
-static void atl1_check_for_link(struct atl1_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- u16 phy_data = 0;
-
- spin_lock(&adapter->lock);
- adapter->phy_timer_pending = false;
- atl1_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
- atl1_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
- spin_unlock(&adapter->lock);
-
- /* notify upper layer link down ASAP */
- if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */
- if (netif_carrier_ok(netdev)) { /* old link state: Up */
- dev_info(&adapter->pdev->dev, "%s link is down\n",
- netdev->name);
- adapter->link_speed = SPEED_0;
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
- }
- }
- schedule_work(&adapter->link_chg_task);
-}
-
-/*
- * atl1_set_multi - Multicast and Promiscuous mode set
- * @netdev: network interface device structure
- *
- * The set_multi entry point is called whenever the multicast address
- * list or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper multicast,
- * promiscuous mode, and all-multi behavior.
- */
-static void atl1_set_multi(struct net_device *netdev)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_hw *hw = &adapter->hw;
- struct dev_mc_list *mc_ptr;
- u32 rctl;
- u32 hash_value;
-
- /* Check for Promiscuous and All Multicast modes */
- rctl = ioread32(hw->hw_addr + REG_MAC_CTRL);
- if (netdev->flags & IFF_PROMISC)
- rctl |= MAC_CTRL_PROMIS_EN;
- else if (netdev->flags & IFF_ALLMULTI) {
- rctl |= MAC_CTRL_MC_ALL_EN;
- rctl &= ~MAC_CTRL_PROMIS_EN;
- } else
- rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
-
- iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL);
-
- /* clear the old settings from the multicast hash table */
- iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
- iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
-
- /* compute mc addresses' hash value ,and put it into hash table */
- for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
- hash_value = atl1_hash_mc_addr(hw, mc_ptr->dmi_addr);
- atl1_hash_set(hw, hash_value);
- }
+ return 0;
}
/*
@@ -974,37 +866,6 @@ static void atl1_via_workaround(struct atl1_adapter *adapter)
iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND);
}
-/*
- * atl1_irq_enable - Enable default interrupt generation settings
- * @adapter: board private structure
- */
-static void atl1_irq_enable(struct atl1_adapter *adapter)
-{
- iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR);
- ioread32(adapter->hw.hw_addr + REG_IMR);
-}
-
-/*
- * atl1_irq_disable - Mask off interrupt generation on the NIC
- * @adapter: board private structure
- */
-static void atl1_irq_disable(struct atl1_adapter *adapter)
-{
- iowrite32(0, adapter->hw.hw_addr + REG_IMR);
- ioread32(adapter->hw.hw_addr + REG_IMR);
- synchronize_irq(adapter->pdev->irq);
-}
-
-static void atl1_clear_phy_int(struct atl1_adapter *adapter)
-{
- u16 phy_data;
- unsigned long flags;
-
- spin_lock_irqsave(&adapter->lock, flags);
- atl1_read_phy_reg(&adapter->hw, 19, &phy_data);
- spin_unlock_irqrestore(&adapter->lock, flags);
-}
-
static void atl1_inc_smb(struct atl1_adapter *adapter)
{
struct stats_msg_block *smb = adapter->smb.smb;
@@ -1076,19 +937,6 @@ static void atl1_inc_smb(struct atl1_adapter *adapter)
adapter->soft_stats.tx_carrier_errors;
}
-/*
- * atl1_get_stats - Get System Network Statistics
- * @netdev: network interface device structure
- *
- * Returns the address of the device statistics structure.
- * The statistics are actually updated from the timer callback.
- */
-static struct net_device_stats *atl1_get_stats(struct net_device *netdev)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- return &adapter->net_stats;
-}
-
static void atl1_update_mailbox(struct atl1_adapter *adapter)
{
unsigned long flags;
@@ -1210,7 +1058,8 @@ static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter)
rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use);
skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN);
- if (unlikely(!skb)) { /* Better luck next round */
+ if (unlikely(!skb)) {
+ /* Better luck next round */
adapter->net_stats.rx_dropped++;
break;
}
@@ -1519,7 +1368,8 @@ static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
buffer_info = &tpd_ring->buffer_info[tpd_next_to_use];
if (unlikely(buffer_info->skb))
BUG();
- buffer_info->skb = NULL; /* put skb in last TPD */
+ /* put skb in last TPD */
+ buffer_info->skb = NULL;
if (tcp_seg) {
/* TSO/GSO */
@@ -1779,7 +1629,7 @@ static irqreturn_t atl1_intr(int irq, void *data)
adapter->cmb.cmb->int_stats = 0;
if (status & ISR_GPHY) /* clear phy status */
- atl1_clear_phy_int(adapter);
+ atlx_clear_phy_int(adapter);
/* clear ISR status, and Enable CMB DMA/Disable Interrupt */
iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR);
@@ -1866,23 +1716,12 @@ static void atl1_phy_config(unsigned long data)
spin_lock_irqsave(&adapter->lock, flags);
adapter->phy_timer_pending = false;
atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
- atl1_write_phy_reg(hw, MII_AT001_CR, hw->mii_1000t_ctrl_reg);
+ atl1_write_phy_reg(hw, MII_ATLX_CR, hw->mii_1000t_ctrl_reg);
atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN);
spin_unlock_irqrestore(&adapter->lock, flags);
}
/*
- * atl1_tx_timeout - Respond to a Tx Hang
- * @netdev: network interface device structure
- */
-static void atl1_tx_timeout(struct net_device *netdev)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- /* Do the reset outside of interrupt context */
- schedule_work(&adapter->tx_timeout_task);
-}
-
-/*
* Orphaned vendor comment left intact here:
* <vendor comment>
* If TPD Buffer size equal to 0, PCIE DMAR_TO_INT
@@ -1904,58 +1743,11 @@ static void atl1_tx_timeout_task(struct work_struct *work)
netif_device_attach(netdev);
}
-/*
- * atl1_link_chg_task - deal with link change event Out of interrupt context
- */
-static void atl1_link_chg_task(struct work_struct *work)
-{
- struct atl1_adapter *adapter =
- container_of(work, struct atl1_adapter, link_chg_task);
- unsigned long flags;
-
- spin_lock_irqsave(&adapter->lock, flags);
- atl1_check_link(adapter);
- spin_unlock_irqrestore(&adapter->lock, flags);
-}
-
-static void atl1_vlan_rx_register(struct net_device *netdev,
- struct vlan_group *grp)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- unsigned long flags;
- u32 ctrl;
-
- spin_lock_irqsave(&adapter->lock, flags);
- /* atl1_irq_disable(adapter); */
- adapter->vlgrp = grp;
-
- if (grp) {
- /* enable VLAN tag insert/strip */
- ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL);
- ctrl |= MAC_CTRL_RMV_VLAN;
- iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL);
- } else {
- /* disable VLAN tag insert/strip */
- ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL);
- ctrl &= ~MAC_CTRL_RMV_VLAN;
- iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL);
- }
-
- /* atl1_irq_enable(adapter); */
- spin_unlock_irqrestore(&adapter->lock, flags);
-}
-
-static void atl1_restore_vlan(struct atl1_adapter *adapter)
-{
- atl1_vlan_rx_register(adapter->netdev, adapter->vlgrp);
-}
-
int atl1_reset(struct atl1_adapter *adapter)
{
int ret;
-
ret = atl1_reset_hw(&adapter->hw);
- if (ret != ATL1_SUCCESS)
+ if (ret)
return ret;
return atl1_init_hw(&adapter->hw);
}
@@ -1967,11 +1759,12 @@ s32 atl1_up(struct atl1_adapter *adapter)
int irq_flags = IRQF_SAMPLE_RANDOM;
/* hardware has been reset, we need to reload some things */
- atl1_set_multi(netdev);
+ atlx_set_multi(netdev);
atl1_init_ring_ptrs(adapter);
- atl1_restore_vlan(adapter);
+ atlx_restore_vlan(adapter);
err = atl1_alloc_rx_buffers(adapter);
- if (unlikely(!err)) /* no RX BUFFER allocated */
+ if (unlikely(!err))
+ /* no RX BUFFER allocated */
return -ENOMEM;
if (unlikely(atl1_configure(adapter))) {
@@ -1992,7 +1785,7 @@ s32 atl1_up(struct atl1_adapter *adapter)
goto err_up;
mod_timer(&adapter->watchdog_timer, jiffies);
- atl1_irq_enable(adapter);
+ atlx_irq_enable(adapter);
atl1_check_link(adapter);
return 0;
@@ -2011,7 +1804,7 @@ void atl1_down(struct atl1_adapter *adapter)
del_timer_sync(&adapter->phy_config_timer);
adapter->phy_timer_pending = false;
- atl1_irq_disable(adapter);
+ atlx_irq_disable(adapter);
free_irq(adapter->pdev->irq, netdev);
pci_disable_msi(adapter->pdev);
atl1_reset_hw(&adapter->hw);
@@ -2094,7 +1887,7 @@ static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
if (ctrl & BMSR_LSTATUS)
- wufc &= ~ATL1_WUFC_LNKC;
+ wufc &= ~ATLX_WUFC_LNKC;
/* reduce speed to 10/100M */
if (wufc) {
@@ -2102,15 +1895,15 @@ static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
/* if resume, let driver to re- setup link */
hw->phy_configured = false;
atl1_set_mac_addr(hw);
- atl1_set_multi(netdev);
+ atlx_set_multi(netdev);
ctrl = 0;
/* turn on magic packet wol */
- if (wufc & ATL1_WUFC_MAG)
+ if (wufc & ATLX_WUFC_MAG)
ctrl = WOL_MAGIC_EN | WOL_MAGIC_PME_EN;
/* turn on Link change WOL */
- if (wufc & ATL1_WUFC_LNKC)
+ if (wufc & ATLX_WUFC_LNKC)
ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
@@ -2118,13 +1911,13 @@ static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
ctrl = ioread32(hw->hw_addr + REG_MAC_CTRL);
ctrl &= ~MAC_CTRL_DBG;
ctrl &= ~MAC_CTRL_PROMIS_EN;
- if (wufc & ATL1_WUFC_MC)
+ if (wufc & ATLX_WUFC_MC)
ctrl |= MAC_CTRL_MC_ALL_EN;
else
ctrl &= ~MAC_CTRL_MC_ALL_EN;
/* turn on broadcast mode if wake on-BC is enabled */
- if (wufc & ATL1_WUFC_BC)
+ if (wufc & ATLX_WUFC_BC)
ctrl |= MAC_CTRL_BC_EN;
else
ctrl &= ~MAC_CTRL_BC_EN;
@@ -2152,12 +1945,13 @@ static int atl1_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct atl1_adapter *adapter = netdev_priv(netdev);
- u32 ret_val;
+ u32 err;
- pci_set_power_state(pdev, 0);
+ pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
- ret_val = pci_enable_device(pdev);
+ /* FIXME: check and handle */
+ err = pci_enable_device(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
@@ -2224,14 +2018,16 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
dev_err(&pdev->dev, "no usable DMA configuration\n");
goto err_dma;
}
- /* Mark all PCI regions associated with PCI device
+ /*
+ * Mark all PCI regions associated with PCI device
* pdev as being reserved by owner atl1_driver_name
*/
- err = pci_request_regions(pdev, atl1_driver_name);
+ err = pci_request_regions(pdev, ATLX_DRIVER_NAME);
if (err)
goto err_request_regions;
- /* Enables bus-mastering on the device and calls
+ /*
+ * Enables bus-mastering on the device and calls
* pcibios_set_master to do the needed arch specific settings
*/
pci_set_master(pdev);
@@ -2257,7 +2053,7 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
/* get device revision number */
adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr +
(REG_MASTER_CTRL + 2));
- dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
+ dev_info(&pdev->dev, "version %s\n", ATLX_DRIVER_VERSION);
/* set default ring resource counts */
adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD;
@@ -2272,17 +2068,17 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
netdev->open = &atl1_open;
netdev->stop = &atl1_close;
netdev->hard_start_xmit = &atl1_xmit_frame;
- netdev->get_stats = &atl1_get_stats;
- netdev->set_multicast_list = &atl1_set_multi;
+ netdev->get_stats = &atlx_get_stats;
+ netdev->set_multicast_list = &atlx_set_multi;
netdev->set_mac_address = &atl1_set_mac;
netdev->change_mtu = &atl1_change_mtu;
- netdev->do_ioctl = &atl1_ioctl;
- netdev->tx_timeout = &atl1_tx_timeout;
+ netdev->do_ioctl = &atlx_ioctl;
+ netdev->tx_timeout = &atlx_tx_timeout;
netdev->watchdog_timeo = 5 * HZ;
#ifdef CONFIG_NET_POLL_CONTROLLER
netdev->poll_controller = atl1_poll_controller;
#endif
- netdev->vlan_rx_register = atl1_vlan_rx_register;
+ netdev->vlan_rx_register = atlx_vlan_rx_register;
netdev->ethtool_ops = &atl1_ethtool_ops;
adapter->bd_number = cards_found;
@@ -2312,7 +2108,7 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
/* atl1_pcie_patch(adapter); */
/* really reset GPHY core */
- iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE);
+ iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE);
/*
* reset the controller to
@@ -2357,7 +2153,7 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task);
- INIT_WORK(&adapter->link_chg_task, atl1_link_chg_task);
+ INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task);
INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task);
@@ -2400,7 +2196,8 @@ static void __devexit atl1_remove(struct pci_dev *pdev)
adapter = netdev_priv(netdev);
- /* Some atl1 boards lack persistent storage for their MAC, and get it
+ /*
+ * Some atl1 boards lack persistent storage for their MAC, and get it
* from the BIOS during POST. If we've been messing with the MAC
* address, we need to save the permanent one.
*/
@@ -2410,7 +2207,7 @@ static void __devexit atl1_remove(struct pci_dev *pdev)
atl1_set_mac_addr(&adapter->hw);
}
- iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE);
+ iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE);
unregister_netdev(netdev);
pci_iounmap(pdev, adapter->hw.hw_addr);
pci_release_regions(pdev);
@@ -2419,7 +2216,7 @@ static void __devexit atl1_remove(struct pci_dev *pdev)
}
static struct pci_driver atl1_driver = {
- .name = atl1_driver_name,
+ .name = ATLX_DRIVER_NAME,
.id_table = atl1_pci_tbl,
.probe = atl1_probe,
.remove = __devexit_p(atl1_remove),
@@ -2451,3 +2248,1170 @@ static int __init atl1_init_module(void)
module_init(atl1_init_module);
module_exit(atl1_exit_module);
+
+struct atl1_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define ATL1_STAT(m) \
+ sizeof(((struct atl1_adapter *)0)->m), offsetof(struct atl1_adapter, m)
+
+static struct atl1_stats atl1_gstrings_stats[] = {
+ {"rx_packets", ATL1_STAT(soft_stats.rx_packets)},
+ {"tx_packets", ATL1_STAT(soft_stats.tx_packets)},
+ {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)},
+ {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)},
+ {"rx_errors", ATL1_STAT(soft_stats.rx_errors)},
+ {"tx_errors", ATL1_STAT(soft_stats.tx_errors)},
+ {"rx_dropped", ATL1_STAT(net_stats.rx_dropped)},
+ {"tx_dropped", ATL1_STAT(net_stats.tx_dropped)},
+ {"multicast", ATL1_STAT(soft_stats.multicast)},
+ {"collisions", ATL1_STAT(soft_stats.collisions)},
+ {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)},
+ {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
+ {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)},
+ {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)},
+ {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)},
+ {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
+ {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)},
+ {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)},
+ {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)},
+ {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)},
+ {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)},
+ {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)},
+ {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)},
+ {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)},
+ {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)},
+ {"tx_underun", ATL1_STAT(soft_stats.tx_underun)},
+ {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)},
+ {"tx_pause", ATL1_STAT(soft_stats.tx_pause)},
+ {"rx_pause", ATL1_STAT(soft_stats.rx_pause)},
+ {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)},
+ {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)}
+};
+
+static void atl1_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ int i;
+ char *p;
+
+ for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
+ p = (char *)adapter+atl1_gstrings_stats[i].stat_offset;
+ data[i] = (atl1_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+
+}
+
+static int atl1_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(atl1_gstrings_stats);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int atl1_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_Autoneg | SUPPORTED_TP);
+ ecmd->advertising = ADVERTISED_TP;
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ ecmd->advertising |=
+ (ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_1000baseT_Full);
+ } else
+ ecmd->advertising |= (ADVERTISED_1000baseT_Full);
+ }
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = 0;
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ if (netif_carrier_ok(adapter->netdev)) {
+ u16 link_speed, link_duplex;
+ atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex);
+ ecmd->speed = link_speed;
+ if (link_duplex == FULL_DUPLEX)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ ecmd->speed = -1;
+ ecmd->duplex = -1;
+ }
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL)
+ ecmd->autoneg = AUTONEG_ENABLE;
+ else
+ ecmd->autoneg = AUTONEG_DISABLE;
+
+ return 0;
+}
+
+static int atl1_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+ u16 phy_data;
+ int ret_val = 0;
+ u16 old_media_type = hw->media_type;
+
+ if (netif_running(adapter->netdev)) {
+ dev_dbg(&adapter->pdev->dev, "ethtool shutting down adapter\n");
+ atl1_down(adapter);
+ }
+
+ if (ecmd->autoneg == AUTONEG_ENABLE)
+ hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
+ else {
+ if (ecmd->speed == SPEED_1000) {
+ if (ecmd->duplex != DUPLEX_FULL) {
+ dev_warn(&adapter->pdev->dev,
+ "can't force to 1000M half duplex\n");
+ ret_val = -EINVAL;
+ goto exit_sset;
+ }
+ hw->media_type = MEDIA_TYPE_1000M_FULL;
+ } else if (ecmd->speed == SPEED_100) {
+ if (ecmd->duplex == DUPLEX_FULL)
+ hw->media_type = MEDIA_TYPE_100M_FULL;
+ else
+ hw->media_type = MEDIA_TYPE_100M_HALF;
+ } else {
+ if (ecmd->duplex == DUPLEX_FULL)
+ hw->media_type = MEDIA_TYPE_10M_FULL;
+ else
+ hw->media_type = MEDIA_TYPE_10M_HALF;
+ }
+ }
+ switch (hw->media_type) {
+ case MEDIA_TYPE_AUTO_SENSOR:
+ ecmd->advertising =
+ ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_Autoneg | ADVERTISED_TP;
+ break;
+ case MEDIA_TYPE_1000M_FULL:
+ ecmd->advertising =
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_Autoneg | ADVERTISED_TP;
+ break;
+ default:
+ ecmd->advertising = 0;
+ break;
+ }
+ if (atl1_phy_setup_autoneg_adv(hw)) {
+ ret_val = -EINVAL;
+ dev_warn(&adapter->pdev->dev,
+ "invalid ethtool speed/duplex setting\n");
+ goto exit_sset;
+ }
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL)
+ phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
+ else {
+ switch (hw->media_type) {
+ case MEDIA_TYPE_100M_FULL:
+ phy_data =
+ MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
+ MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_100M_HALF:
+ phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_10M_FULL:
+ phy_data =
+ MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ default:
+ /* MEDIA_TYPE_10M_HALF: */
+ phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ }
+ }
+ atl1_write_phy_reg(hw, MII_BMCR, phy_data);
+exit_sset:
+ if (ret_val)
+ hw->media_type = old_media_type;
+
+ if (netif_running(adapter->netdev)) {
+ dev_dbg(&adapter->pdev->dev, "ethtool starting adapter\n");
+ atl1_up(adapter);
+ } else if (!ret_val) {
+ dev_dbg(&adapter->pdev->dev, "ethtool resetting adapter\n");
+ atl1_reset(adapter);
+ }
+ return ret_val;
+}
+
+static void atl1_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+
+ strncpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver));
+ strncpy(drvinfo->version, ATLX_DRIVER_VERSION,
+ sizeof(drvinfo->version));
+ strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ sizeof(drvinfo->bus_info));
+ drvinfo->eedump_len = ATL1_EEDUMP_LEN;
+}
+
+static void atl1_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+
+ wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
+ wol->wolopts = 0;
+ if (adapter->wol & ATLX_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & ATLX_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & ATLX_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & ATLX_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+ return;
+}
+
+static int atl1_set_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+
+ if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+ adapter->wol = 0;
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wol |= ATLX_WUFC_EX;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wol |= ATLX_WUFC_MC;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wol |= ATLX_WUFC_BC;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= ATLX_WUFC_MAG;
+ return 0;
+}
+
+static void atl1_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_tpd_ring *txdr = &adapter->tpd_ring;
+ struct atl1_rfd_ring *rxdr = &adapter->rfd_ring;
+
+ ring->rx_max_pending = ATL1_MAX_RFD;
+ ring->tx_max_pending = ATL1_MAX_TPD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rxdr->count;
+ ring->tx_pending = txdr->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int atl1_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_tpd_ring *tpdr = &adapter->tpd_ring;
+ struct atl1_rrd_ring *rrdr = &adapter->rrd_ring;
+ struct atl1_rfd_ring *rfdr = &adapter->rfd_ring;
+
+ struct atl1_tpd_ring tpd_old, tpd_new;
+ struct atl1_rfd_ring rfd_old, rfd_new;
+ struct atl1_rrd_ring rrd_old, rrd_new;
+ struct atl1_ring_header rhdr_old, rhdr_new;
+ int err;
+
+ tpd_old = adapter->tpd_ring;
+ rfd_old = adapter->rfd_ring;
+ rrd_old = adapter->rrd_ring;
+ rhdr_old = adapter->ring_header;
+
+ if (netif_running(adapter->netdev))
+ atl1_down(adapter);
+
+ rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD);
+ rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD :
+ rfdr->count;
+ rfdr->count = (rfdr->count + 3) & ~3;
+ rrdr->count = rfdr->count;
+
+ tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD);
+ tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD :
+ tpdr->count;
+ tpdr->count = (tpdr->count + 3) & ~3;
+
+ if (netif_running(adapter->netdev)) {
+ /* try to get new resources before deleting old */
+ err = atl1_setup_ring_resources(adapter);
+ if (err)
+ goto err_setup_ring;
+
+ /*
+ * save the new, restore the old in order to free it,
+ * then restore the new back again
+ */
+
+ rfd_new = adapter->rfd_ring;
+ rrd_new = adapter->rrd_ring;
+ tpd_new = adapter->tpd_ring;
+ rhdr_new = adapter->ring_header;
+ adapter->rfd_ring = rfd_old;
+ adapter->rrd_ring = rrd_old;
+ adapter->tpd_ring = tpd_old;
+ adapter->ring_header = rhdr_old;
+ atl1_free_ring_resources(adapter);
+ adapter->rfd_ring = rfd_new;
+ adapter->rrd_ring = rrd_new;
+ adapter->tpd_ring = tpd_new;
+ adapter->ring_header = rhdr_new;
+
+ err = atl1_up(adapter);
+ if (err)
+ return err;
+ }
+ return 0;
+
+err_setup_ring:
+ adapter->rfd_ring = rfd_old;
+ adapter->rrd_ring = rrd_old;
+ adapter->tpd_ring = tpd_old;
+ adapter->ring_header = rhdr_old;
+ atl1_up(adapter);
+ return err;
+}
+
+static void atl1_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *epause)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ epause->autoneg = AUTONEG_ENABLE;
+ } else {
+ epause->autoneg = AUTONEG_DISABLE;
+ }
+ epause->rx_pause = 1;
+ epause->tx_pause = 1;
+}
+
+static int atl1_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *epause)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ epause->autoneg = AUTONEG_ENABLE;
+ } else {
+ epause->autoneg = AUTONEG_DISABLE;
+ }
+
+ epause->rx_pause = 1;
+ epause->tx_pause = 1;
+
+ return 0;
+}
+
+/* FIXME: is this right? -- CHS */
+static u32 atl1_get_rx_csum(struct net_device *netdev)
+{
+ return 1;
+}
+
+static void atl1_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_STATS:
+ for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
+ memcpy(p, atl1_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ break;
+ }
+}
+
+static int atl1_nway_reset(struct net_device *netdev)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+
+ if (netif_running(netdev)) {
+ u16 phy_data;
+ atl1_down(adapter);
+
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
+ } else {
+ switch (hw->media_type) {
+ case MEDIA_TYPE_100M_FULL:
+ phy_data = MII_CR_FULL_DUPLEX |
+ MII_CR_SPEED_100 | MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_100M_HALF:
+ phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_10M_FULL:
+ phy_data = MII_CR_FULL_DUPLEX |
+ MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ default:
+ /* MEDIA_TYPE_10M_HALF */
+ phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
+ }
+ }
+ atl1_write_phy_reg(hw, MII_BMCR, phy_data);
+ atl1_up(adapter);
+ }
+ return 0;
+}
+
+const struct ethtool_ops atl1_ethtool_ops = {
+ .get_settings = atl1_get_settings,
+ .set_settings = atl1_set_settings,
+ .get_drvinfo = atl1_get_drvinfo,
+ .get_wol = atl1_get_wol,
+ .set_wol = atl1_set_wol,
+ .get_ringparam = atl1_get_ringparam,
+ .set_ringparam = atl1_set_ringparam,
+ .get_pauseparam = atl1_get_pauseparam,
+ .set_pauseparam = atl1_set_pauseparam,
+ .get_rx_csum = atl1_get_rx_csum,
+ .set_tx_csum = ethtool_op_set_tx_hw_csum,
+ .get_link = ethtool_op_get_link,
+ .set_sg = ethtool_op_set_sg,
+ .get_strings = atl1_get_strings,
+ .nway_reset = atl1_nway_reset,
+ .get_ethtool_stats = atl1_get_ethtool_stats,
+ .get_sset_count = atl1_get_sset_count,
+ .set_tso = ethtool_op_set_tso,
+};
+
+/*
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ * hw - Struct containing variables accessed by shared code
+ * return : 0 or idle status (if error)
+ */
+s32 atl1_reset_hw(struct atl1_hw *hw)
+{
+ struct pci_dev *pdev = hw->back->pdev;
+ u32 icr;
+ int i;
+
+ /*
+ * Clear Interrupt mask to stop board from generating
+ * interrupts & Clear any pending interrupt events
+ */
+ /*
+ * iowrite32(0, hw->hw_addr + REG_IMR);
+ * iowrite32(0xffffffff, hw->hw_addr + REG_ISR);
+ */
+
+ /*
+ * Issue Soft Reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL);
+ ioread32(hw->hw_addr + REG_MASTER_CTRL);
+
+ iowrite16(1, hw->hw_addr + REG_PHY_ENABLE);
+ ioread16(hw->hw_addr + REG_PHY_ENABLE);
+
+ /* delay about 1ms */
+ msleep(1);
+
+ /* Wait at least 10ms for All module to be Idle */
+ for (i = 0; i < 10; i++) {
+ icr = ioread32(hw->hw_addr + REG_IDLE_STATUS);
+ if (!icr)
+ break;
+ /* delay 1 ms */
+ msleep(1);
+ /* FIXME: still the right way to do this? */
+ cpu_relax();
+ }
+
+ if (icr) {
+ dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr);
+ return icr;
+ }
+
+ return 0;
+}
+
+/* function about EEPROM
+ *
+ * check_eeprom_exist
+ * return 0 if eeprom exist
+ */
+static int atl1_check_eeprom_exist(struct atl1_hw *hw)
+{
+ u32 value;
+ value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
+ if (value & SPI_FLASH_CTRL_EN_VPD) {
+ value &= ~SPI_FLASH_CTRL_EN_VPD;
+ iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
+ }
+
+ value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST);
+ return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
+}
+
+static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value)
+{
+ int i;
+ u32 control;
+
+ if (offset & 3)
+ /* address do not align */
+ return false;
+
+ iowrite32(0, hw->hw_addr + REG_VPD_DATA);
+ control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
+ iowrite32(control, hw->hw_addr + REG_VPD_CAP);
+ ioread32(hw->hw_addr + REG_VPD_CAP);
+
+ for (i = 0; i < 10; i++) {
+ msleep(2);
+ control = ioread32(hw->hw_addr + REG_VPD_CAP);
+ if (control & VPD_CAP_VPD_FLAG)
+ break;
+ }
+ if (control & VPD_CAP_VPD_FLAG) {
+ *p_value = ioread32(hw->hw_addr + REG_VPD_DATA);
+ return true;
+ }
+ /* timeout */
+ return false;
+}
+
+/*
+ * Reads the value from a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to read
+ */
+s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data)
+{
+ u32 val;
+ int i;
+
+ val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
+ MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 <<
+ MDIO_CLK_SEL_SHIFT;
+ iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
+ ioread32(hw->hw_addr + REG_MDIO_CTRL);
+
+ for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+ udelay(2);
+ val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ break;
+ }
+ if (!(val & (MDIO_START | MDIO_BUSY))) {
+ *phy_data = (u16) val;
+ return 0;
+ }
+ return ATLX_ERR_PHY;
+}
+
+#define CUSTOM_SPI_CS_SETUP 2
+#define CUSTOM_SPI_CLK_HI 2
+#define CUSTOM_SPI_CLK_LO 2
+#define CUSTOM_SPI_CS_HOLD 2
+#define CUSTOM_SPI_CS_HI 3
+
+static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf)
+{
+ int i;
+ u32 value;
+
+ iowrite32(0, hw->hw_addr + REG_SPI_DATA);
+ iowrite32(addr, hw->hw_addr + REG_SPI_ADDR);
+
+ value = SPI_FLASH_CTRL_WAIT_READY |
+ (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
+ SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI &
+ SPI_FLASH_CTRL_CLK_HI_MASK) <<
+ SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO &
+ SPI_FLASH_CTRL_CLK_LO_MASK) <<
+ SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD &
+ SPI_FLASH_CTRL_CS_HOLD_MASK) <<
+ SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI &
+ SPI_FLASH_CTRL_CS_HI_MASK) <<
+ SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) <<
+ SPI_FLASH_CTRL_INS_SHIFT;
+
+ iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
+
+ value |= SPI_FLASH_CTRL_START;
+ iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
+ ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
+
+ for (i = 0; i < 10; i++) {
+ msleep(1);
+ value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
+ if (!(value & SPI_FLASH_CTRL_START))
+ break;
+ }
+
+ if (value & SPI_FLASH_CTRL_START)
+ return false;
+
+ *buf = ioread32(hw->hw_addr + REG_SPI_DATA);
+
+ return true;
+}
+
+/*
+ * get_permanent_address
+ * return 0 if get valid mac address,
+ */
+static int atl1_get_permanent_address(struct atl1_hw *hw)
+{
+ u32 addr[2];
+ u32 i, control;
+ u16 reg;
+ u8 eth_addr[ETH_ALEN];
+ bool key_valid;
+
+ if (is_valid_ether_addr(hw->perm_mac_addr))
+ return 0;
+
+ /* init */
+ addr[0] = addr[1] = 0;
+
+ if (!atl1_check_eeprom_exist(hw)) {
+ reg = 0;
+ key_valid = false;
+ /* Read out all EEPROM content */
+ i = 0;
+ while (1) {
+ if (atl1_read_eeprom(hw, i + 0x100, &control)) {
+ if (key_valid) {
+ if (reg == REG_MAC_STA_ADDR)
+ addr[0] = control;
+ else if (reg == (REG_MAC_STA_ADDR + 4))
+ addr[1] = control;
+ key_valid = false;
+ } else if ((control & 0xff) == 0x5A) {
+ key_valid = true;
+ reg = (u16) (control >> 16);
+ } else
+ break;
+ } else
+ /* read error */
+ break;
+ i += 4;
+ }
+
+ *(u32 *) &eth_addr[2] = swab32(addr[0]);
+ *(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
+ if (is_valid_ether_addr(eth_addr)) {
+ memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
+ return 0;
+ }
+ return 1;
+ }
+
+ /* see if SPI FLAGS exist ? */
+ addr[0] = addr[1] = 0;
+ reg = 0;
+ key_valid = false;
+ i = 0;
+ while (1) {
+ if (atl1_spi_read(hw, i + 0x1f000, &control)) {
+ if (key_valid) {
+ if (reg == REG_MAC_STA_ADDR)
+ addr[0] = control;
+ else if (reg == (REG_MAC_STA_ADDR + 4))
+ addr[1] = control;
+ key_valid = false;
+ } else if ((control & 0xff) == 0x5A) {
+ key_valid = true;
+ reg = (u16) (control >> 16);
+ } else
+ /* data end */
+ break;
+ } else
+ /* read error */
+ break;
+ i += 4;
+ }
+
+ *(u32 *) &eth_addr[2] = swab32(addr[0]);
+ *(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
+ if (is_valid_ether_addr(eth_addr)) {
+ memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
+ return 0;
+ }
+
+ /*
+ * On some motherboards, the MAC address is written by the
+ * BIOS directly to the MAC register during POST, and is
+ * not stored in eeprom. If all else thus far has failed
+ * to fetch the permanent MAC address, try reading it directly.
+ */
+ addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR);
+ addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4));
+ *(u32 *) &eth_addr[2] = swab32(addr[0]);
+ *(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
+ if (is_valid_ether_addr(eth_addr)) {
+ memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
+ return 0;
+ }
+
+ return 1;
+}
+
+/*
+ * Reads the adapter's MAC address from the EEPROM
+ * hw - Struct containing variables accessed by shared code
+ */
+s32 atl1_read_mac_addr(struct atl1_hw *hw)
+{
+ u16 i;
+
+ if (atl1_get_permanent_address(hw))
+ random_ether_addr(hw->perm_mac_addr);
+
+ for (i = 0; i < ETH_ALEN; i++)
+ hw->mac_addr[i] = hw->perm_mac_addr[i];
+ return 0;
+}
+
+/*
+ * Hashes an address to determine its location in the multicast table
+ * hw - Struct containing variables accessed by shared code
+ * mc_addr - the multicast address to hash
+ *
+ * atl1_hash_mc_addr
+ * purpose
+ * set hash value for a multicast address
+ * hash calcu processing :
+ * 1. calcu 32bit CRC for multicast address
+ * 2. reverse crc with MSB to LSB
+ */
+u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr)
+{
+ u32 crc32, value = 0;
+ int i;
+
+ crc32 = ether_crc_le(6, mc_addr);
+ for (i = 0; i < 32; i++)
+ value |= (((crc32 >> i) & 1) << (31 - i));
+
+ return value;
+}
+
+/*
+ * Sets the bit in the multicast table corresponding to the hash value.
+ * hw - Struct containing variables accessed by shared code
+ * hash_value - Multicast address hash value
+ */
+void atl1_hash_set(struct atl1_hw *hw, u32 hash_value)
+{
+ u32 hash_bit, hash_reg;
+ u32 mta;
+
+ /*
+ * The HASH Table is a register array of 2 32-bit registers.
+ * It is treated like an array of 64 bits. We want to set
+ * bit BitArray[hash_value]. So we figure out what register
+ * the bit is in, read it, OR in the new bit, then write
+ * back the new value. The register is determined by the
+ * upper 7 bits of the hash value and the bit within that
+ * register are determined by the lower 5 bits of the value.
+ */
+ hash_reg = (hash_value >> 31) & 0x1;
+ hash_bit = (hash_value >> 26) & 0x1F;
+ mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
+ mta |= (1 << hash_bit);
+ iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
+}
+
+/*
+ * Writes a value to a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to write
+ * data - data to write to the PHY
+ */
+s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data)
+{
+ int i;
+ u32 val;
+
+ val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
+ (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
+ MDIO_SUP_PREAMBLE |
+ MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+ iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
+ ioread32(hw->hw_addr + REG_MDIO_CTRL);
+
+ for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+ udelay(2);
+ val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ break;
+ }
+
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ return 0;
+
+ return ATLX_ERR_PHY;
+}
+
+/*
+ * Make L001's PHY out of Power Saving State (bug)
+ * hw - Struct containing variables accessed by shared code
+ * when power on, L001's PHY always on Power saving State
+ * (Gigabit Link forbidden)
+ */
+static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw)
+{
+ s32 ret;
+ ret = atl1_write_phy_reg(hw, 29, 0x0029);
+ if (ret)
+ return ret;
+ return atl1_write_phy_reg(hw, 30, 0);
+}
+
+/*
+ *TODO: do something or get rid of this
+ */
+s32 atl1_phy_enter_power_saving(struct atl1_hw *hw)
+{
+/* s32 ret_val;
+ * u16 phy_data;
+ */
+
+/*
+ ret_val = atl1_write_phy_reg(hw, ...);
+ ret_val = atl1_write_phy_reg(hw, ...);
+ ....
+*/
+ return 0;
+}
+
+/*
+ * Resets the PHY and make all config validate
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
+ */
+static s32 atl1_phy_reset(struct atl1_hw *hw)
+{
+ struct pci_dev *pdev = hw->back->pdev;
+ s32 ret_val;
+ u16 phy_data;
+
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL)
+ phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
+ else {
+ switch (hw->media_type) {
+ case MEDIA_TYPE_100M_FULL:
+ phy_data =
+ MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
+ MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_100M_HALF:
+ phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_10M_FULL:
+ phy_data =
+ MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ default:
+ /* MEDIA_TYPE_10M_HALF: */
+ phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ }
+ }
+
+ ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data);
+ if (ret_val) {
+ u32 val;
+ int i;
+ /* pcie serdes link may be down! */
+ dev_dbg(&pdev->dev, "pcie phy link down\n");
+
+ for (i = 0; i < 25; i++) {
+ msleep(1);
+ val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ break;
+ }
+
+ if ((val & (MDIO_START | MDIO_BUSY)) != 0) {
+ dev_warn(&pdev->dev, "pcie link down at least 25ms\n");
+ return ret_val;
+ }
+ }
+ return 0;
+}
+
+/*
+ * Configures PHY autoneg and flow control advertisement settings
+ * hw - Struct containing variables accessed by shared code
+ */
+s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw)
+{
+ s32 ret_val;
+ s16 mii_autoneg_adv_reg;
+ s16 mii_1000t_ctrl_reg;
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
+
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK;
+
+ /*
+ * First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
+ mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK;
+
+ /*
+ * Need to parse media_type and set up
+ * the appropriate PHY registers.
+ */
+ switch (hw->media_type) {
+ case MEDIA_TYPE_AUTO_SENSOR:
+ mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS |
+ MII_AR_10T_FD_CAPS |
+ MII_AR_100TX_HD_CAPS |
+ MII_AR_100TX_FD_CAPS);
+ mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
+ break;
+
+ case MEDIA_TYPE_1000M_FULL:
+ mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
+ break;
+
+ case MEDIA_TYPE_100M_FULL:
+ mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
+ break;
+
+ case MEDIA_TYPE_100M_HALF:
+ mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
+ break;
+
+ case MEDIA_TYPE_10M_FULL:
+ mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
+ break;
+
+ default:
+ mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
+ break;
+ }
+
+ /* flow control fixed to enable all */
+ mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
+
+ hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
+ hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg;
+
+ ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ return 0;
+}
+
+/*
+ * Configures link settings.
+ * hw - Struct containing variables accessed by shared code
+ * Assumes the hardware has previously been reset and the
+ * transmitter and receiver are not enabled.
+ */
+static s32 atl1_setup_link(struct atl1_hw *hw)
+{
+ struct pci_dev *pdev = hw->back->pdev;
+ s32 ret_val;
+
+ /*
+ * Options:
+ * PHY will advertise value(s) parsed from
+ * autoneg_advertised and fc
+ * no matter what autoneg is , We will not wait link result.
+ */
+ ret_val = atl1_phy_setup_autoneg_adv(hw);
+ if (ret_val) {
+ dev_dbg(&pdev->dev, "error setting up autonegotiation\n");
+ return ret_val;
+ }
+ /* SW.Reset , En-Auto-Neg if needed */
+ ret_val = atl1_phy_reset(hw);
+ if (ret_val) {
+ dev_dbg(&pdev->dev, "error resetting phy\n");
+ return ret_val;
+ }
+ hw->phy_configured = true;
+ return ret_val;
+}
+
+static void atl1_init_flash_opcode(struct atl1_hw *hw)
+{
+ if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
+ /* Atmel */
+ hw->flash_vendor = 0;
+
+ /* Init OP table */
+ iowrite8(flash_table[hw->flash_vendor].cmd_program,
+ hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM);
+ iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase,
+ hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE);
+ iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase,
+ hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE);
+ iowrite8(flash_table[hw->flash_vendor].cmd_rdid,
+ hw->hw_addr + REG_SPI_FLASH_OP_RDID);
+ iowrite8(flash_table[hw->flash_vendor].cmd_wren,
+ hw->hw_addr + REG_SPI_FLASH_OP_WREN);
+ iowrite8(flash_table[hw->flash_vendor].cmd_rdsr,
+ hw->hw_addr + REG_SPI_FLASH_OP_RDSR);
+ iowrite8(flash_table[hw->flash_vendor].cmd_wrsr,
+ hw->hw_addr + REG_SPI_FLASH_OP_WRSR);
+ iowrite8(flash_table[hw->flash_vendor].cmd_read,
+ hw->hw_addr + REG_SPI_FLASH_OP_READ);
+}
+
+/*
+ * Performs basic configuration of the adapter.
+ * hw - Struct containing variables accessed by shared code
+ * Assumes that the controller has previously been reset and is in a
+ * post-reset uninitialized state. Initializes multicast table,
+ * and Calls routines to setup link
+ * Leaves the transmit and receive units disabled and uninitialized.
+ */
+s32 atl1_init_hw(struct atl1_hw *hw)
+{
+ u32 ret_val = 0;
+
+ /* Zero out the Multicast HASH table */
+ iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
+ /* clear the old settings from the multicast hash table */
+ iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
+
+ atl1_init_flash_opcode(hw);
+
+ if (!hw->phy_configured) {
+ /* enable GPHY LinkChange Interrrupt */
+ ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
+ if (ret_val)
+ return ret_val;
+ /* make PHY out of power-saving state */
+ ret_val = atl1_phy_leave_power_saving(hw);
+ if (ret_val)
+ return ret_val;
+ /* Call a subroutine to configure the link */
+ ret_val = atl1_setup_link(hw);
+ }
+ return ret_val;
+}
+
+/*
+ * Detects the current speed and duplex settings of the hardware.
+ * hw - Struct containing variables accessed by shared code
+ * speed - Speed of the connection
+ * duplex - Duplex setting of the connection
+ */
+s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex)
+{
+ struct pci_dev *pdev = hw->back->pdev;
+ s32 ret_val;
+ u16 phy_data;
+
+ /* ; --- Read PHY Specific Status Register (17) */
+ ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED))
+ return ATLX_ERR_PHY_RES;
+
+ switch (phy_data & MII_ATLX_PSSR_SPEED) {
+ case MII_ATLX_PSSR_1000MBS:
+ *speed = SPEED_1000;
+ break;
+ case MII_ATLX_PSSR_100MBS:
+ *speed = SPEED_100;
+ break;
+ case MII_ATLX_PSSR_10MBS:
+ *speed = SPEED_10;
+ break;
+ default:
+ dev_dbg(&pdev->dev, "error getting speed\n");
+ return ATLX_ERR_PHY_SPEED;
+ break;
+ }
+ if (phy_data & MII_ATLX_PSSR_DPLX)
+ *duplex = FULL_DUPLEX;
+ else
+ *duplex = HALF_DUPLEX;
+
+ return 0;
+}
+
+void atl1_set_mac_addr(struct atl1_hw *hw)
+{
+ u32 value;
+ /*
+ * 00-0B-6A-F6-00-DC
+ * 0: 6AF600DC 1: 000B
+ * low dword
+ */
+ value = (((u32) hw->mac_addr[2]) << 24) |
+ (((u32) hw->mac_addr[3]) << 16) |
+ (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5]));
+ iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
+ /* high dword */
+ value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
+ iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2));
+}
diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h
index ff4765f6c3de..538948d5a184 100644
--- a/drivers/net/atlx/atl1.h
+++ b/drivers/net/atlx/atl1.h
@@ -1,6 +1,6 @@
/*
* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
- * Copyright(c) 2006 Chris Snook <csnook@redhat.com>
+ * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
* Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
*
* Derived from Intel e1000 driver
@@ -21,26 +21,559 @@
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-#ifndef _ATL1_H_
-#define _ATL1_H_
+#ifndef ATL1_H
+#define ATL1_H
-#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/ethtool.h>
#include <linux/if_vlan.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include "atlx.h"
+
+#define ATLX_DRIVER_NAME "atl1"
-#include "atl1_hw.h"
+MODULE_DESCRIPTION("Atheros L1 Gigabit Ethernet Driver");
+
+#define atlx_adapter atl1_adapter
+#define atlx_check_for_link atl1_check_for_link
+#define atlx_check_link atl1_check_link
+#define atlx_hash_mc_addr atl1_hash_mc_addr
+#define atlx_hash_set atl1_hash_set
+#define atlx_hw atl1_hw
+#define atlx_mii_ioctl atl1_mii_ioctl
+#define atlx_read_phy_reg atl1_read_phy_reg
+#define atlx_set_mac atl1_set_mac
+#define atlx_set_mac_addr atl1_set_mac_addr
+
+struct atl1_adapter;
+struct atl1_hw;
/* function prototypes needed by multiple files */
+s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw);
+s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data);
+s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex);
+s32 atl1_read_mac_addr(struct atl1_hw *hw);
+s32 atl1_init_hw(struct atl1_hw *hw);
+s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex);
+s32 atl1_set_speed_and_duplex(struct atl1_hw *hw, u16 speed, u16 duplex);
+u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr);
+void atl1_hash_set(struct atl1_hw *hw, u32 hash_value);
+s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data);
+void atl1_set_mac_addr(struct atl1_hw *hw);
+s32 atl1_phy_enter_power_saving(struct atl1_hw *hw);
+s32 atl1_reset_hw(struct atl1_hw *hw);
+void atl1_check_options(struct atl1_adapter *adapter);
+static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+ int cmd);
+static u32 atl1_check_link(struct atl1_adapter *adapter);
s32 atl1_up(struct atl1_adapter *adapter);
void atl1_down(struct atl1_adapter *adapter);
int atl1_reset(struct atl1_adapter *adapter);
-s32 atl1_setup_ring_resources(struct atl1_adapter *adapter);
-void atl1_free_ring_resources(struct atl1_adapter *adapter);
-extern char atl1_driver_name[];
-extern char atl1_driver_version[];
extern const struct ethtool_ops atl1_ethtool_ops;
-struct atl1_adapter;
+/* hardware definitions specific to L1 */
+
+/* Block IDLE Status Register */
+#define IDLE_STATUS_RXMAC 0x1
+#define IDLE_STATUS_TXMAC 0x2
+#define IDLE_STATUS_RXQ 0x4
+#define IDLE_STATUS_TXQ 0x8
+#define IDLE_STATUS_DMAR 0x10
+#define IDLE_STATUS_DMAW 0x20
+#define IDLE_STATUS_SMB 0x40
+#define IDLE_STATUS_CMB 0x80
+
+/* MDIO Control Register */
+#define MDIO_WAIT_TIMES 30
+
+/* MAC Control Register */
+#define MAC_CTRL_TX_PAUSE 0x10000
+#define MAC_CTRL_SCNT 0x20000
+#define MAC_CTRL_SRST_TX 0x40000
+#define MAC_CTRL_TX_SIMURST 0x80000
+#define MAC_CTRL_SPEED_SHIFT 20
+#define MAC_CTRL_SPEED_MASK 0x300000
+#define MAC_CTRL_SPEED_1000 0x2
+#define MAC_CTRL_SPEED_10_100 0x1
+#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000
+#define MAC_CTRL_TX_HUGE 0x800000
+#define MAC_CTRL_RX_CHKSUM_EN 0x1000000
+#define MAC_CTRL_DBG 0x8000000
+
+/* Wake-On-Lan control register */
+#define WOL_CLK_SWITCH_EN 0x8000
+#define WOL_PT5_EN 0x200000
+#define WOL_PT6_EN 0x400000
+#define WOL_PT5_MATCH 0x8000000
+#define WOL_PT6_MATCH 0x10000000
+
+/* WOL Length ( 2 DWORD ) */
+#define REG_WOL_PATTERN_LEN 0x14A4
+#define WOL_PT_LEN_MASK 0x7F
+#define WOL_PT0_LEN_SHIFT 0
+#define WOL_PT1_LEN_SHIFT 8
+#define WOL_PT2_LEN_SHIFT 16
+#define WOL_PT3_LEN_SHIFT 24
+#define WOL_PT4_LEN_SHIFT 0
+#define WOL_PT5_LEN_SHIFT 8
+#define WOL_PT6_LEN_SHIFT 16
+
+/* Internal SRAM Partition Registers, low 32 bits */
+#define REG_SRAM_RFD_LEN 0x1504
+#define REG_SRAM_RRD_ADDR 0x1508
+#define REG_SRAM_RRD_LEN 0x150C
+#define REG_SRAM_TPD_ADDR 0x1510
+#define REG_SRAM_TPD_LEN 0x1514
+#define REG_SRAM_TRD_ADDR 0x1518
+#define REG_SRAM_TRD_LEN 0x151C
+#define REG_SRAM_RXF_ADDR 0x1520
+#define REG_SRAM_RXF_LEN 0x1524
+#define REG_SRAM_TXF_ADDR 0x1528
+#define REG_SRAM_TXF_LEN 0x152C
+#define REG_SRAM_TCPH_PATH_ADDR 0x1530
+#define SRAM_TCPH_ADDR_MASK 0xFFF
+#define SRAM_TCPH_ADDR_SHIFT 0
+#define SRAM_PATH_ADDR_MASK 0xFFF
+#define SRAM_PATH_ADDR_SHIFT 16
+
+/* Load Ptr Register */
+#define REG_LOAD_PTR 0x1534
+
+/* Descriptor Control registers, low 32 bits */
+#define REG_DESC_RFD_ADDR_LO 0x1544
+#define REG_DESC_RRD_ADDR_LO 0x1548
+#define REG_DESC_TPD_ADDR_LO 0x154C
+#define REG_DESC_CMB_ADDR_LO 0x1550
+#define REG_DESC_SMB_ADDR_LO 0x1554
+#define REG_DESC_RFD_RRD_RING_SIZE 0x1558
+#define DESC_RFD_RING_SIZE_MASK 0x7FF
+#define DESC_RFD_RING_SIZE_SHIFT 0
+#define DESC_RRD_RING_SIZE_MASK 0x7FF
+#define DESC_RRD_RING_SIZE_SHIFT 16
+#define REG_DESC_TPD_RING_SIZE 0x155C
+#define DESC_TPD_RING_SIZE_MASK 0x3FF
+#define DESC_TPD_RING_SIZE_SHIFT 0
+
+/* TXQ Control Register */
+#define REG_TXQ_CTRL 0x1580
+#define TXQ_CTRL_TPD_BURST_NUM_SHIFT 0
+#define TXQ_CTRL_TPD_BURST_NUM_MASK 0x1F
+#define TXQ_CTRL_EN 0x20
+#define TXQ_CTRL_ENH_MODE 0x40
+#define TXQ_CTRL_TPD_FETCH_TH_SHIFT 8
+#define TXQ_CTRL_TPD_FETCH_TH_MASK 0x3F
+#define TXQ_CTRL_TXF_BURST_NUM_SHIFT 16
+#define TXQ_CTRL_TXF_BURST_NUM_MASK 0xFFFF
+
+/* Jumbo packet Threshold for task offload */
+#define REG_TX_JUMBO_TASK_TH_TPD_IPG 0x1584
+#define TX_JUMBO_TASK_TH_MASK 0x7FF
+#define TX_JUMBO_TASK_TH_SHIFT 0
+#define TX_TPD_MIN_IPG_MASK 0x1F
+#define TX_TPD_MIN_IPG_SHIFT 16
+
+/* RXQ Control Register */
+#define REG_RXQ_CTRL 0x15A0
+#define RXQ_CTRL_RFD_BURST_NUM_SHIFT 0
+#define RXQ_CTRL_RFD_BURST_NUM_MASK 0xFF
+#define RXQ_CTRL_RRD_BURST_THRESH_SHIFT 8
+#define RXQ_CTRL_RRD_BURST_THRESH_MASK 0xFF
+#define RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT 16
+#define RXQ_CTRL_RFD_PREF_MIN_IPG_MASK 0x1F
+#define RXQ_CTRL_CUT_THRU_EN 0x40000000
+#define RXQ_CTRL_EN 0x80000000
+
+/* Rx jumbo packet threshold and rrd retirement timer */
+#define REG_RXQ_JMBOSZ_RRDTIM 0x15A4
+#define RXQ_JMBOSZ_TH_MASK 0x7FF
+#define RXQ_JMBOSZ_TH_SHIFT 0
+#define RXQ_JMBO_LKAH_MASK 0xF
+#define RXQ_JMBO_LKAH_SHIFT 11
+#define RXQ_RRD_TIMER_MASK 0xFFFF
+#define RXQ_RRD_TIMER_SHIFT 16
+
+/* RFD flow control register */
+#define REG_RXQ_RXF_PAUSE_THRESH 0x15A8
+#define RXQ_RXF_PAUSE_TH_HI_SHIFT 16
+#define RXQ_RXF_PAUSE_TH_HI_MASK 0xFFF
+#define RXQ_RXF_PAUSE_TH_LO_SHIFT 0
+#define RXQ_RXF_PAUSE_TH_LO_MASK 0xFFF
+
+/* RRD flow control register */
+#define REG_RXQ_RRD_PAUSE_THRESH 0x15AC
+#define RXQ_RRD_PAUSE_TH_HI_SHIFT 0
+#define RXQ_RRD_PAUSE_TH_HI_MASK 0xFFF
+#define RXQ_RRD_PAUSE_TH_LO_SHIFT 16
+#define RXQ_RRD_PAUSE_TH_LO_MASK 0xFFF
+
+/* DMA Engine Control Register */
+#define REG_DMA_CTRL 0x15C0
+#define DMA_CTRL_DMAR_IN_ORDER 0x1
+#define DMA_CTRL_DMAR_ENH_ORDER 0x2
+#define DMA_CTRL_DMAR_OUT_ORDER 0x4
+#define DMA_CTRL_RCB_VALUE 0x8
+#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4
+#define DMA_CTRL_DMAR_BURST_LEN_MASK 7
+#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7
+#define DMA_CTRL_DMAW_BURST_LEN_MASK 7
+#define DMA_CTRL_DMAR_EN 0x400
+#define DMA_CTRL_DMAW_EN 0x800
+
+/* CMB/SMB Control Register */
+#define REG_CSMB_CTRL 0x15D0
+#define CSMB_CTRL_CMB_NOW 1
+#define CSMB_CTRL_SMB_NOW 2
+#define CSMB_CTRL_CMB_EN 4
+#define CSMB_CTRL_SMB_EN 8
+
+/* CMB DMA Write Threshold Register */
+#define REG_CMB_WRITE_TH 0x15D4
+#define CMB_RRD_TH_SHIFT 0
+#define CMB_RRD_TH_MASK 0x7FF
+#define CMB_TPD_TH_SHIFT 16
+#define CMB_TPD_TH_MASK 0x7FF
+
+/* RX/TX count-down timer to trigger CMB-write. 2us resolution. */
+#define REG_CMB_WRITE_TIMER 0x15D8
+#define CMB_RX_TM_SHIFT 0
+#define CMB_RX_TM_MASK 0xFFFF
+#define CMB_TX_TM_SHIFT 16
+#define CMB_TX_TM_MASK 0xFFFF
+
+/* Number of packet received since last CMB write */
+#define REG_CMB_RX_PKT_CNT 0x15DC
+
+/* Number of packet transmitted since last CMB write */
+#define REG_CMB_TX_PKT_CNT 0x15E0
+
+/* SMB auto DMA timer register */
+#define REG_SMB_TIMER 0x15E4
+
+/* Mailbox Register */
+#define REG_MAILBOX 0x15F0
+#define MB_RFD_PROD_INDX_SHIFT 0
+#define MB_RFD_PROD_INDX_MASK 0x7FF
+#define MB_RRD_CONS_INDX_SHIFT 11
+#define MB_RRD_CONS_INDX_MASK 0x7FF
+#define MB_TPD_PROD_INDX_SHIFT 22
+#define MB_TPD_PROD_INDX_MASK 0x3FF
+
+/* Interrupt Status Register */
+#define ISR_SMB 0x1
+#define ISR_TIMER 0x2
+#define ISR_MANUAL 0x4
+#define ISR_RXF_OV 0x8
+#define ISR_RFD_UNRUN 0x10
+#define ISR_RRD_OV 0x20
+#define ISR_TXF_UNRUN 0x40
+#define ISR_LINK 0x80
+#define ISR_HOST_RFD_UNRUN 0x100
+#define ISR_HOST_RRD_OV 0x200
+#define ISR_DMAR_TO_RST 0x400
+#define ISR_DMAW_TO_RST 0x800
+#define ISR_GPHY 0x1000
+#define ISR_RX_PKT 0x10000
+#define ISR_TX_PKT 0x20000
+#define ISR_TX_DMA 0x40000
+#define ISR_RX_DMA 0x80000
+#define ISR_CMB_RX 0x100000
+#define ISR_CMB_TX 0x200000
+#define ISR_MAC_RX 0x400000
+#define ISR_MAC_TX 0x800000
+#define ISR_DIS_SMB 0x20000000
+#define ISR_DIS_DMA 0x40000000
+
+/* Normal Interrupt mask */
+#define IMR_NORMAL_MASK (\
+ ISR_SMB |\
+ ISR_GPHY |\
+ ISR_PHY_LINKDOWN|\
+ ISR_DMAR_TO_RST |\
+ ISR_DMAW_TO_RST |\
+ ISR_CMB_TX |\
+ ISR_CMB_RX)
+
+/* Debug Interrupt Mask (enable all interrupt) */
+#define IMR_DEBUG_MASK (\
+ ISR_SMB |\
+ ISR_TIMER |\
+ ISR_MANUAL |\
+ ISR_RXF_OV |\
+ ISR_RFD_UNRUN |\
+ ISR_RRD_OV |\
+ ISR_TXF_UNRUN |\
+ ISR_LINK |\
+ ISR_CMB_TX |\
+ ISR_CMB_RX |\
+ ISR_RX_PKT |\
+ ISR_TX_PKT |\
+ ISR_MAC_RX |\
+ ISR_MAC_TX)
+
+#define MEDIA_TYPE_1000M_FULL 1
+#define MEDIA_TYPE_100M_FULL 2
+#define MEDIA_TYPE_100M_HALF 3
+#define MEDIA_TYPE_10M_FULL 4
+#define MEDIA_TYPE_10M_HALF 5
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* All but 1000-Half */
+
+#define MAX_JUMBO_FRAME_SIZE 10240
+
+#define ATL1_EEDUMP_LEN 48
+
+/* Statistics counters collected by the MAC */
+struct stats_msg_block {
+ /* rx */
+ u32 rx_ok; /* good RX packets */
+ u32 rx_bcast; /* good RX broadcast packets */
+ u32 rx_mcast; /* good RX multicast packets */
+ u32 rx_pause; /* RX pause frames */
+ u32 rx_ctrl; /* RX control packets other than pause frames */
+ u32 rx_fcs_err; /* RX packets with bad FCS */
+ u32 rx_len_err; /* RX packets with length != actual size */
+ u32 rx_byte_cnt; /* good bytes received. FCS is NOT included */
+ u32 rx_runt; /* RX packets < 64 bytes with good FCS */
+ u32 rx_frag; /* RX packets < 64 bytes with bad FCS */
+ u32 rx_sz_64; /* 64 byte RX packets */
+ u32 rx_sz_65_127;
+ u32 rx_sz_128_255;
+ u32 rx_sz_256_511;
+ u32 rx_sz_512_1023;
+ u32 rx_sz_1024_1518;
+ u32 rx_sz_1519_max; /* 1519 byte to MTU RX packets */
+ u32 rx_sz_ov; /* truncated RX packets > MTU */
+ u32 rx_rxf_ov; /* frames dropped due to RX FIFO overflow */
+ u32 rx_rrd_ov; /* frames dropped due to RRD overflow */
+ u32 rx_align_err; /* alignment errors */
+ u32 rx_bcast_byte_cnt; /* RX broadcast bytes, excluding FCS */
+ u32 rx_mcast_byte_cnt; /* RX multicast bytes, excluding FCS */
+ u32 rx_err_addr; /* packets dropped due to address filtering */
+
+ /* tx */
+ u32 tx_ok; /* good TX packets */
+ u32 tx_bcast; /* good TX broadcast packets */
+ u32 tx_mcast; /* good TX multicast packets */
+ u32 tx_pause; /* TX pause frames */
+ u32 tx_exc_defer; /* TX packets deferred excessively */
+ u32 tx_ctrl; /* TX control frames, excluding pause frames */
+ u32 tx_defer; /* TX packets deferred */
+ u32 tx_byte_cnt; /* bytes transmitted, FCS is NOT included */
+ u32 tx_sz_64; /* 64 byte TX packets */
+ u32 tx_sz_65_127;
+ u32 tx_sz_128_255;
+ u32 tx_sz_256_511;
+ u32 tx_sz_512_1023;
+ u32 tx_sz_1024_1518;
+ u32 tx_sz_1519_max; /* 1519 byte to MTU TX packets */
+ u32 tx_1_col; /* packets TX after a single collision */
+ u32 tx_2_col; /* packets TX after multiple collisions */
+ u32 tx_late_col; /* TX packets with late collisions */
+ u32 tx_abort_col; /* TX packets aborted w/excessive collisions */
+ u32 tx_underrun; /* TX packets aborted due to TX FIFO underrun
+ * or TRD FIFO underrun */
+ u32 tx_rd_eop; /* reads beyond the EOP into the next frame
+ * when TRD was not written timely */
+ u32 tx_len_err; /* TX packets where length != actual size */
+ u32 tx_trunc; /* TX packets truncated due to size > MTU */
+ u32 tx_bcast_byte; /* broadcast bytes transmitted, excluding FCS */
+ u32 tx_mcast_byte; /* multicast bytes transmitted, excluding FCS */
+ u32 smb_updated; /* 1: SMB Updated. This is used by software to
+ * indicate the statistics update. Software
+ * should clear this bit after retrieving the
+ * statistics information. */
+};
+
+/* Coalescing Message Block */
+struct coals_msg_block {
+ u32 int_stats; /* interrupt status */
+ u16 rrd_prod_idx; /* TRD Producer Index. */
+ u16 rfd_cons_idx; /* RFD Consumer Index. */
+ u16 update; /* Selene sets this bit every time it DMAs the
+ * CMB to host memory. Software should clear
+ * this bit when CMB info is processed. */
+ u16 tpd_cons_idx; /* TPD Consumer Index. */
+};
+
+/* RRD descriptor */
+struct rx_return_desc {
+ u8 num_buf; /* Number of RFD buffers used by the received packet */
+ u8 resved;
+ u16 buf_indx; /* RFD Index of the first buffer */
+ union {
+ u32 valid;
+ struct {
+ u16 rx_chksum;
+ u16 pkt_size;
+ } xsum_sz;
+ } xsz;
+
+ u16 pkt_flg; /* Packet flags */
+ u16 err_flg; /* Error flags */
+ u16 resved2;
+ u16 vlan_tag; /* VLAN TAG */
+};
+
+#define PACKET_FLAG_ETH_TYPE 0x0080
+#define PACKET_FLAG_VLAN_INS 0x0100
+#define PACKET_FLAG_ERR 0x0200
+#define PACKET_FLAG_IPV4 0x0400
+#define PACKET_FLAG_UDP 0x0800
+#define PACKET_FLAG_TCP 0x1000
+#define PACKET_FLAG_BCAST 0x2000
+#define PACKET_FLAG_MCAST 0x4000
+#define PACKET_FLAG_PAUSE 0x8000
+
+#define ERR_FLAG_CRC 0x0001
+#define ERR_FLAG_CODE 0x0002
+#define ERR_FLAG_DRIBBLE 0x0004
+#define ERR_FLAG_RUNT 0x0008
+#define ERR_FLAG_OV 0x0010
+#define ERR_FLAG_TRUNC 0x0020
+#define ERR_FLAG_IP_CHKSUM 0x0040
+#define ERR_FLAG_L4_CHKSUM 0x0080
+#define ERR_FLAG_LEN 0x0100
+#define ERR_FLAG_DES_ADDR 0x0200
+
+/* RFD descriptor */
+struct rx_free_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ __le16 buf_len; /* Size of the receive buffer in host memory */
+ u16 coalese; /* Update consumer index to host after the
+ * reception of this frame */
+ /* __attribute__ ((packed)) is required */
+} __attribute__ ((packed));
+
+/* tsopu defines */
+#define TSO_PARAM_BUFLEN_MASK 0x3FFF
+#define TSO_PARAM_BUFLEN_SHIFT 0
+#define TSO_PARAM_DMAINT_MASK 0x0001
+#define TSO_PARAM_DMAINT_SHIFT 14
+#define TSO_PARAM_PKTNT_MASK 0x0001
+#define TSO_PARAM_PKTINT_SHIFT 15
+#define TSO_PARAM_VLANTAG_MASK 0xFFFF
+#define TSO_PARAM_VLAN_SHIFT 16
+
+/* tsopl defines */
+#define TSO_PARAM_EOP_MASK 0x0001
+#define TSO_PARAM_EOP_SHIFT 0
+#define TSO_PARAM_COALESCE_MASK 0x0001
+#define TSO_PARAM_COALESCE_SHIFT 1
+#define TSO_PARAM_INSVLAG_MASK 0x0001
+#define TSO_PARAM_INSVLAG_SHIFT 2
+#define TSO_PARAM_CUSTOMCKSUM_MASK 0x0001
+#define TSO_PARAM_CUSTOMCKSUM_SHIFT 3
+#define TSO_PARAM_SEGMENT_MASK 0x0001
+#define TSO_PARAM_SEGMENT_SHIFT 4
+#define TSO_PARAM_IPCKSUM_MASK 0x0001
+#define TSO_PARAM_IPCKSUM_SHIFT 5
+#define TSO_PARAM_TCPCKSUM_MASK 0x0001
+#define TSO_PARAM_TCPCKSUM_SHIFT 6
+#define TSO_PARAM_UDPCKSUM_MASK 0x0001
+#define TSO_PARAM_UDPCKSUM_SHIFT 7
+#define TSO_PARAM_VLANTAGGED_MASK 0x0001
+#define TSO_PARAM_VLANTAGGED_SHIFT 8
+#define TSO_PARAM_ETHTYPE_MASK 0x0001
+#define TSO_PARAM_ETHTYPE_SHIFT 9
+#define TSO_PARAM_IPHL_MASK 0x000F
+#define TSO_PARAM_IPHL_SHIFT 10
+#define TSO_PARAM_TCPHDRLEN_MASK 0x000F
+#define TSO_PARAM_TCPHDRLEN_SHIFT 14
+#define TSO_PARAM_HDRFLAG_MASK 0x0001
+#define TSO_PARAM_HDRFLAG_SHIFT 18
+#define TSO_PARAM_MSS_MASK 0x1FFF
+#define TSO_PARAM_MSS_SHIFT 19
+
+/* csumpu defines */
+#define CSUM_PARAM_BUFLEN_MASK 0x3FFF
+#define CSUM_PARAM_BUFLEN_SHIFT 0
+#define CSUM_PARAM_DMAINT_MASK 0x0001
+#define CSUM_PARAM_DMAINT_SHIFT 14
+#define CSUM_PARAM_PKTINT_MASK 0x0001
+#define CSUM_PARAM_PKTINT_SHIFT 15
+#define CSUM_PARAM_VALANTAG_MASK 0xFFFF
+#define CSUM_PARAM_VALAN_SHIFT 16
+
+/* csumpl defines*/
+#define CSUM_PARAM_EOP_MASK 0x0001
+#define CSUM_PARAM_EOP_SHIFT 0
+#define CSUM_PARAM_COALESCE_MASK 0x0001
+#define CSUM_PARAM_COALESCE_SHIFT 1
+#define CSUM_PARAM_INSVLAG_MASK 0x0001
+#define CSUM_PARAM_INSVLAG_SHIFT 2
+#define CSUM_PARAM_CUSTOMCKSUM_MASK 0x0001
+#define CSUM_PARAM_CUSTOMCKSUM_SHIFT 3
+#define CSUM_PARAM_SEGMENT_MASK 0x0001
+#define CSUM_PARAM_SEGMENT_SHIFT 4
+#define CSUM_PARAM_IPCKSUM_MASK 0x0001
+#define CSUM_PARAM_IPCKSUM_SHIFT 5
+#define CSUM_PARAM_TCPCKSUM_MASK 0x0001
+#define CSUM_PARAM_TCPCKSUM_SHIFT 6
+#define CSUM_PARAM_UDPCKSUM_MASK 0x0001
+#define CSUM_PARAM_UDPCKSUM_SHIFT 7
+#define CSUM_PARAM_VLANTAGGED_MASK 0x0001
+#define CSUM_PARAM_VLANTAGGED_SHIFT 8
+#define CSUM_PARAM_ETHTYPE_MASK 0x0001
+#define CSUM_PARAM_ETHTYPE_SHIFT 9
+#define CSUM_PARAM_IPHL_MASK 0x000F
+#define CSUM_PARAM_IPHL_SHIFT 10
+#define CSUM_PARAM_PLOADOFFSET_MASK 0x00FF
+#define CSUM_PARAM_PLOADOFFSET_SHIFT 16
+#define CSUM_PARAM_XSUMOFFSET_MASK 0x00FF
+#define CSUM_PARAM_XSUMOFFSET_SHIFT 24
+
+/* TPD descriptor */
+struct tso_param {
+ /* The order of these declarations is important -- don't change it */
+ u32 tsopu; /* tso_param upper word */
+ u32 tsopl; /* tso_param lower word */
+};
+
+struct csum_param {
+ /* The order of these declarations is important -- don't change it */
+ u32 csumpu; /* csum_param upper word */
+ u32 csumpl; /* csum_param lower word */
+};
+
+union tpd_descr {
+ u64 data;
+ struct csum_param csum;
+ struct tso_param tso;
+};
+
+struct tx_packet_desc {
+ __le64 buffer_addr;
+ union tpd_descr desc;
+};
+
+/* DMA Order Settings */
+enum atl1_dma_order {
+ atl1_dma_ord_in = 1,
+ atl1_dma_ord_enh = 2,
+ atl1_dma_ord_out = 4
+};
+
+enum atl1_dma_rcb {
+ atl1_rcb_64 = 0,
+ atl1_rcb_128 = 1
+};
+
+enum atl1_dma_req_block {
+ atl1_dma_req_128 = 0,
+ atl1_dma_req_256 = 1,
+ atl1_dma_req_512 = 2,
+ atl1_dma_req_1024 = 3,
+ atl1_dma_req_2048 = 4,
+ atl1_dma_req_4096 = 5
+};
#define ATL1_MAX_INTR 3
#define ATL1_MAX_TX_BUF_LEN 0x3000 /* 12288 bytes */
@@ -58,19 +591,6 @@ struct atl1_adapter;
#define ATL1_RRD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_return_desc)
/*
- * This detached comment is preserved for documentation purposes only.
- * It was originally attached to some code that got deleted, but seems
- * important enough to keep around...
- *
- * <begin detached comment>
- * Some workarounds require millisecond delays and are run during interrupt
- * context. Most notably, when establishing link, the phy may need tweaking
- * but cannot process phy register reads/writes faster than millisecond
- * intervals...and we establish link due to a "link status change" interrupt.
- * <end detached comment>
- */
-
-/*
* atl1_ring_header represents a single, contiguous block of DMA space
* mapped for the three descriptor rings (tpd, rfd, rrd) and the two
* message blocks (cmb, smb) described below
@@ -156,20 +676,15 @@ struct atl1_sft_stats {
u64 tx_aborted_errors;
u64 tx_window_errors;
u64 tx_carrier_errors;
- u64 tx_pause; /* num pause packets transmitted. */
- u64 excecol; /* num tx packets w/ excessive collisions. */
- u64 deffer; /* num tx packets deferred */
- u64 scc; /* num packets subsequently transmitted
- * successfully w/ single prior collision. */
- u64 mcc; /* num packets subsequently transmitted
- * successfully w/ multiple prior collisions. */
- u64 latecol; /* num tx packets w/ late collisions. */
- u64 tx_underun; /* num tx packets aborted due to transmit
- * FIFO underrun, or TRD FIFO underrun */
- u64 tx_trunc; /* num tx packets truncated due to size
- * exceeding MTU, regardless whether truncated
- * by the chip or not. (The name doesn't really
- * reflect the meaning in this case.) */
+ u64 tx_pause; /* TX pause frames */
+ u64 excecol; /* TX packets w/ excessive collisions */
+ u64 deffer; /* TX packets deferred */
+ u64 scc; /* packets TX after a single collision */
+ u64 mcc; /* packets TX after multiple collisions */
+ u64 latecol; /* TX packets w/ late collisions */
+ u64 tx_underun; /* TX packets aborted due to TX FIFO underrun
+ * or TRD FIFO underrun */
+ u64 tx_trunc; /* TX packets truncated due to size > MTU */
u64 rx_pause; /* num Pause packets received. */
u64 rx_rrd_ov;
u64 rx_trunc;
@@ -184,8 +699,7 @@ struct atl1_hw {
enum atl1_dma_req_block dmar_block;
enum atl1_dma_req_block dmaw_block;
u8 preamble_len;
- u8 max_retry; /* Retransmission maximum, after which the
- * packet will be discarded */
+ u8 max_retry;
u8 jam_ipg; /* IPG to start JAM for collision based flow
* control in half-duplex mode. In units of
* 8-bit time */
@@ -271,16 +785,15 @@ struct atl1_adapter {
u64 hw_csum_err;
u64 hw_csum_good;
- u16 imt; /* interrupt moderator timer (2us resolution */
- u16 ict; /* interrupt clear timer (2us resolution */
- struct mii_if_info mii; /* MII interface info */
+ u16 imt; /* interrupt moderator timer (2us resolution) */
+ u16 ict; /* interrupt clear timer (2us resolution */
+ struct mii_if_info mii; /* MII interface info */
- /* structs defined in atl1_hw.h */
- u32 bd_number; /* board number */
+ u32 bd_number; /* board number */
bool pci_using_64;
struct atl1_hw hw;
struct atl1_smb smb;
struct atl1_cmb cmb;
};
-#endif /* _ATL1_H_ */
+#endif /* ATL1_H */
diff --git a/drivers/net/atlx/atl1_ethtool.c b/drivers/net/atlx/atl1_ethtool.c
deleted file mode 100644
index 68a83be843ab..000000000000
--- a/drivers/net/atlx/atl1_ethtool.c
+++ /dev/null
@@ -1,505 +0,0 @@
-/*
- * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
- * Copyright(c) 2006 Chris Snook <csnook@redhat.com>
- * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
- *
- * Derived from Intel e1000 driver
- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ethtool.h>
-#include <linux/netdevice.h>
-#include <linux/mii.h>
-#include <asm/uaccess.h>
-
-#include "atl1.h"
-
-struct atl1_stats {
- char stat_string[ETH_GSTRING_LEN];
- int sizeof_stat;
- int stat_offset;
-};
-
-#define ATL1_STAT(m) sizeof(((struct atl1_adapter *)0)->m), \
- offsetof(struct atl1_adapter, m)
-
-static struct atl1_stats atl1_gstrings_stats[] = {
- {"rx_packets", ATL1_STAT(soft_stats.rx_packets)},
- {"tx_packets", ATL1_STAT(soft_stats.tx_packets)},
- {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)},
- {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)},
- {"rx_errors", ATL1_STAT(soft_stats.rx_errors)},
- {"tx_errors", ATL1_STAT(soft_stats.tx_errors)},
- {"rx_dropped", ATL1_STAT(net_stats.rx_dropped)},
- {"tx_dropped", ATL1_STAT(net_stats.tx_dropped)},
- {"multicast", ATL1_STAT(soft_stats.multicast)},
- {"collisions", ATL1_STAT(soft_stats.collisions)},
- {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)},
- {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
- {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)},
- {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)},
- {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)},
- {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
- {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)},
- {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)},
- {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)},
- {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)},
- {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)},
- {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)},
- {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)},
- {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)},
- {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)},
- {"tx_underun", ATL1_STAT(soft_stats.tx_underun)},
- {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)},
- {"tx_pause", ATL1_STAT(soft_stats.tx_pause)},
- {"rx_pause", ATL1_STAT(soft_stats.rx_pause)},
- {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)},
- {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)}
-};
-
-static void atl1_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, u64 *data)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- int i;
- char *p;
-
- for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
- p = (char *)adapter+atl1_gstrings_stats[i].stat_offset;
- data[i] = (atl1_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
- }
-
-}
-
-static int atl1_get_sset_count(struct net_device *netdev, int sset)
-{
- switch (sset) {
- case ETH_SS_STATS:
- return ARRAY_SIZE(atl1_gstrings_stats);
- default:
- return -EOPNOTSUPP;
- }
-}
-
-static int atl1_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_hw *hw = &adapter->hw;
-
- ecmd->supported = (SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_1000baseT_Full |
- SUPPORTED_Autoneg | SUPPORTED_TP);
- ecmd->advertising = ADVERTISED_TP;
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
- hw->media_type == MEDIA_TYPE_1000M_FULL) {
- ecmd->advertising |= ADVERTISED_Autoneg;
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) {
- ecmd->advertising |= ADVERTISED_Autoneg;
- ecmd->advertising |=
- (ADVERTISED_10baseT_Half |
- ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half |
- ADVERTISED_100baseT_Full |
- ADVERTISED_1000baseT_Full);
- }
- else
- ecmd->advertising |= (ADVERTISED_1000baseT_Full);
- }
- ecmd->port = PORT_TP;
- ecmd->phy_address = 0;
- ecmd->transceiver = XCVR_INTERNAL;
-
- if (netif_carrier_ok(adapter->netdev)) {
- u16 link_speed, link_duplex;
- atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex);
- ecmd->speed = link_speed;
- if (link_duplex == FULL_DUPLEX)
- ecmd->duplex = DUPLEX_FULL;
- else
- ecmd->duplex = DUPLEX_HALF;
- } else {
- ecmd->speed = -1;
- ecmd->duplex = -1;
- }
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
- hw->media_type == MEDIA_TYPE_1000M_FULL)
- ecmd->autoneg = AUTONEG_ENABLE;
- else
- ecmd->autoneg = AUTONEG_DISABLE;
-
- return 0;
-}
-
-static int atl1_set_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_hw *hw = &adapter->hw;
- u16 phy_data;
- int ret_val = 0;
- u16 old_media_type = hw->media_type;
-
- if (netif_running(adapter->netdev)) {
- dev_dbg(&adapter->pdev->dev, "ethtool shutting down adapter\n");
- atl1_down(adapter);
- }
-
- if (ecmd->autoneg == AUTONEG_ENABLE)
- hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
- else {
- if (ecmd->speed == SPEED_1000) {
- if (ecmd->duplex != DUPLEX_FULL) {
- dev_warn(&adapter->pdev->dev,
- "can't force to 1000M half duplex\n");
- ret_val = -EINVAL;
- goto exit_sset;
- }
- hw->media_type = MEDIA_TYPE_1000M_FULL;
- } else if (ecmd->speed == SPEED_100) {
- if (ecmd->duplex == DUPLEX_FULL) {
- hw->media_type = MEDIA_TYPE_100M_FULL;
- } else
- hw->media_type = MEDIA_TYPE_100M_HALF;
- } else {
- if (ecmd->duplex == DUPLEX_FULL)
- hw->media_type = MEDIA_TYPE_10M_FULL;
- else
- hw->media_type = MEDIA_TYPE_10M_HALF;
- }
- }
- switch (hw->media_type) {
- case MEDIA_TYPE_AUTO_SENSOR:
- ecmd->advertising =
- ADVERTISED_10baseT_Half |
- ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half |
- ADVERTISED_100baseT_Full |
- ADVERTISED_1000baseT_Full |
- ADVERTISED_Autoneg | ADVERTISED_TP;
- break;
- case MEDIA_TYPE_1000M_FULL:
- ecmd->advertising =
- ADVERTISED_1000baseT_Full |
- ADVERTISED_Autoneg | ADVERTISED_TP;
- break;
- default:
- ecmd->advertising = 0;
- break;
- }
- if (atl1_phy_setup_autoneg_adv(hw)) {
- ret_val = -EINVAL;
- dev_warn(&adapter->pdev->dev,
- "invalid ethtool speed/duplex setting\n");
- goto exit_sset;
- }
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
- hw->media_type == MEDIA_TYPE_1000M_FULL)
- phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
- else {
- switch (hw->media_type) {
- case MEDIA_TYPE_100M_FULL:
- phy_data =
- MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
- MII_CR_RESET;
- break;
- case MEDIA_TYPE_100M_HALF:
- phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
- break;
- case MEDIA_TYPE_10M_FULL:
- phy_data =
- MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
- break;
- default: /* MEDIA_TYPE_10M_HALF: */
- phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
- break;
- }
- }
- atl1_write_phy_reg(hw, MII_BMCR, phy_data);
-exit_sset:
- if (ret_val)
- hw->media_type = old_media_type;
-
- if (netif_running(adapter->netdev)) {
- dev_dbg(&adapter->pdev->dev, "ethtool starting adapter\n");
- atl1_up(adapter);
- } else if (!ret_val) {
- dev_dbg(&adapter->pdev->dev, "ethtool resetting adapter\n");
- atl1_reset(adapter);
- }
- return ret_val;
-}
-
-static void atl1_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *drvinfo)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
-
- strncpy(drvinfo->driver, atl1_driver_name, sizeof(drvinfo->driver));
- strncpy(drvinfo->version, atl1_driver_version,
- sizeof(drvinfo->version));
- strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
- strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
- sizeof(drvinfo->bus_info));
- drvinfo->eedump_len = ATL1_EEDUMP_LEN;
-}
-
-static void atl1_get_wol(struct net_device *netdev,
- struct ethtool_wolinfo *wol)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
-
- wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
- wol->wolopts = 0;
- if (adapter->wol & ATL1_WUFC_EX)
- wol->wolopts |= WAKE_UCAST;
- if (adapter->wol & ATL1_WUFC_MC)
- wol->wolopts |= WAKE_MCAST;
- if (adapter->wol & ATL1_WUFC_BC)
- wol->wolopts |= WAKE_BCAST;
- if (adapter->wol & ATL1_WUFC_MAG)
- wol->wolopts |= WAKE_MAGIC;
- return;
-}
-
-static int atl1_set_wol(struct net_device *netdev,
- struct ethtool_wolinfo *wol)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
-
- if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
- return -EOPNOTSUPP;
- adapter->wol = 0;
- if (wol->wolopts & WAKE_UCAST)
- adapter->wol |= ATL1_WUFC_EX;
- if (wol->wolopts & WAKE_MCAST)
- adapter->wol |= ATL1_WUFC_MC;
- if (wol->wolopts & WAKE_BCAST)
- adapter->wol |= ATL1_WUFC_BC;
- if (wol->wolopts & WAKE_MAGIC)
- adapter->wol |= ATL1_WUFC_MAG;
- return 0;
-}
-
-static void atl1_get_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_tpd_ring *txdr = &adapter->tpd_ring;
- struct atl1_rfd_ring *rxdr = &adapter->rfd_ring;
-
- ring->rx_max_pending = ATL1_MAX_RFD;
- ring->tx_max_pending = ATL1_MAX_TPD;
- ring->rx_mini_max_pending = 0;
- ring->rx_jumbo_max_pending = 0;
- ring->rx_pending = rxdr->count;
- ring->tx_pending = txdr->count;
- ring->rx_mini_pending = 0;
- ring->rx_jumbo_pending = 0;
-}
-
-static int atl1_set_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_tpd_ring *tpdr = &adapter->tpd_ring;
- struct atl1_rrd_ring *rrdr = &adapter->rrd_ring;
- struct atl1_rfd_ring *rfdr = &adapter->rfd_ring;
-
- struct atl1_tpd_ring tpd_old, tpd_new;
- struct atl1_rfd_ring rfd_old, rfd_new;
- struct atl1_rrd_ring rrd_old, rrd_new;
- struct atl1_ring_header rhdr_old, rhdr_new;
- int err;
-
- tpd_old = adapter->tpd_ring;
- rfd_old = adapter->rfd_ring;
- rrd_old = adapter->rrd_ring;
- rhdr_old = adapter->ring_header;
-
- if (netif_running(adapter->netdev))
- atl1_down(adapter);
-
- rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD);
- rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD :
- rfdr->count;
- rfdr->count = (rfdr->count + 3) & ~3;
- rrdr->count = rfdr->count;
-
- tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD);
- tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD :
- tpdr->count;
- tpdr->count = (tpdr->count + 3) & ~3;
-
- if (netif_running(adapter->netdev)) {
- /* try to get new resources before deleting old */
- err = atl1_setup_ring_resources(adapter);
- if (err)
- goto err_setup_ring;
-
- /*
- * save the new, restore the old in order to free it,
- * then restore the new back again
- */
-
- rfd_new = adapter->rfd_ring;
- rrd_new = adapter->rrd_ring;
- tpd_new = adapter->tpd_ring;
- rhdr_new = adapter->ring_header;
- adapter->rfd_ring = rfd_old;
- adapter->rrd_ring = rrd_old;
- adapter->tpd_ring = tpd_old;
- adapter->ring_header = rhdr_old;
- atl1_free_ring_resources(adapter);
- adapter->rfd_ring = rfd_new;
- adapter->rrd_ring = rrd_new;
- adapter->tpd_ring = tpd_new;
- adapter->ring_header = rhdr_new;
-
- err = atl1_up(adapter);
- if (err)
- return err;
- }
- return 0;
-
-err_setup_ring:
- adapter->rfd_ring = rfd_old;
- adapter->rrd_ring = rrd_old;
- adapter->tpd_ring = tpd_old;
- adapter->ring_header = rhdr_old;
- atl1_up(adapter);
- return err;
-}
-
-static void atl1_get_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *epause)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_hw *hw = &adapter->hw;
-
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
- hw->media_type == MEDIA_TYPE_1000M_FULL) {
- epause->autoneg = AUTONEG_ENABLE;
- } else {
- epause->autoneg = AUTONEG_DISABLE;
- }
- epause->rx_pause = 1;
- epause->tx_pause = 1;
-}
-
-static int atl1_set_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *epause)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_hw *hw = &adapter->hw;
-
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
- hw->media_type == MEDIA_TYPE_1000M_FULL) {
- epause->autoneg = AUTONEG_ENABLE;
- } else {
- epause->autoneg = AUTONEG_DISABLE;
- }
-
- epause->rx_pause = 1;
- epause->tx_pause = 1;
-
- return 0;
-}
-
-static u32 atl1_get_rx_csum(struct net_device *netdev)
-{
- return 1;
-}
-
-static void atl1_get_strings(struct net_device *netdev, u32 stringset,
- u8 *data)
-{
- u8 *p = data;
- int i;
-
- switch (stringset) {
- case ETH_SS_STATS:
- for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
- memcpy(p, atl1_gstrings_stats[i].stat_string,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
- break;
- }
-}
-
-static int atl1_nway_reset(struct net_device *netdev)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_hw *hw = &adapter->hw;
-
- if (netif_running(netdev)) {
- u16 phy_data;
- atl1_down(adapter);
-
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
- hw->media_type == MEDIA_TYPE_1000M_FULL) {
- phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
- } else {
- switch (hw->media_type) {
- case MEDIA_TYPE_100M_FULL:
- phy_data = MII_CR_FULL_DUPLEX |
- MII_CR_SPEED_100 | MII_CR_RESET;
- break;
- case MEDIA_TYPE_100M_HALF:
- phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
- break;
- case MEDIA_TYPE_10M_FULL:
- phy_data = MII_CR_FULL_DUPLEX |
- MII_CR_SPEED_10 | MII_CR_RESET;
- break;
- default: /* MEDIA_TYPE_10M_HALF */
- phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
- }
- }
- atl1_write_phy_reg(hw, MII_BMCR, phy_data);
- atl1_up(adapter);
- }
- return 0;
-}
-
-const struct ethtool_ops atl1_ethtool_ops = {
- .get_settings = atl1_get_settings,
- .set_settings = atl1_set_settings,
- .get_drvinfo = atl1_get_drvinfo,
- .get_wol = atl1_get_wol,
- .set_wol = atl1_set_wol,
- .get_ringparam = atl1_get_ringparam,
- .set_ringparam = atl1_set_ringparam,
- .get_pauseparam = atl1_get_pauseparam,
- .set_pauseparam = atl1_set_pauseparam,
- .get_rx_csum = atl1_get_rx_csum,
- .set_tx_csum = ethtool_op_set_tx_hw_csum,
- .get_link = ethtool_op_get_link,
- .set_sg = ethtool_op_set_sg,
- .get_strings = atl1_get_strings,
- .nway_reset = atl1_nway_reset,
- .get_ethtool_stats = atl1_get_ethtool_stats,
- .get_sset_count = atl1_get_sset_count,
- .set_tso = ethtool_op_set_tso,
-};
diff --git a/drivers/net/atlx/atl1_hw.c b/drivers/net/atlx/atl1_hw.c
deleted file mode 100644
index 9d3bd22e3a82..000000000000
--- a/drivers/net/atlx/atl1_hw.c
+++ /dev/null
@@ -1,720 +0,0 @@
-/*
- * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
- * Copyright(c) 2006 Chris Snook <csnook@redhat.com>
- * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
- *
- * Derived from Intel e1000 driver
- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/if_vlan.h>
-#include <linux/etherdevice.h>
-#include <linux/crc32.h>
-#include <asm/byteorder.h>
-
-#include "atl1.h"
-
-/*
- * Reset the transmit and receive units; mask and clear all interrupts.
- * hw - Struct containing variables accessed by shared code
- * return : ATL1_SUCCESS or idle status (if error)
- */
-s32 atl1_reset_hw(struct atl1_hw *hw)
-{
- struct pci_dev *pdev = hw->back->pdev;
- u32 icr;
- int i;
-
- /*
- * Clear Interrupt mask to stop board from generating
- * interrupts & Clear any pending interrupt events
- */
- /*
- * iowrite32(0, hw->hw_addr + REG_IMR);
- * iowrite32(0xffffffff, hw->hw_addr + REG_ISR);
- */
-
- /*
- * Issue Soft Reset to the MAC. This will reset the chip's
- * transmit, receive, DMA. It will not effect
- * the current PCI configuration. The global reset bit is self-
- * clearing, and should clear within a microsecond.
- */
- iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL);
- ioread32(hw->hw_addr + REG_MASTER_CTRL);
-
- iowrite16(1, hw->hw_addr + REG_GPHY_ENABLE);
- ioread16(hw->hw_addr + REG_GPHY_ENABLE);
-
- msleep(1); /* delay about 1ms */
-
- /* Wait at least 10ms for All module to be Idle */
- for (i = 0; i < 10; i++) {
- icr = ioread32(hw->hw_addr + REG_IDLE_STATUS);
- if (!icr)
- break;
- msleep(1); /* delay 1 ms */
- cpu_relax(); /* FIXME: is this still the right way to do this? */
- }
-
- if (icr) {
- dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr);
- return icr;
- }
-
- return ATL1_SUCCESS;
-}
-
-/* function about EEPROM
- *
- * check_eeprom_exist
- * return 0 if eeprom exist
- */
-static int atl1_check_eeprom_exist(struct atl1_hw *hw)
-{
- u32 value;
- value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
- if (value & SPI_FLASH_CTRL_EN_VPD) {
- value &= ~SPI_FLASH_CTRL_EN_VPD;
- iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
- }
-
- value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST);
- return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
-}
-
-static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value)
-{
- int i;
- u32 control;
-
- if (offset & 3)
- return false; /* address do not align */
-
- iowrite32(0, hw->hw_addr + REG_VPD_DATA);
- control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
- iowrite32(control, hw->hw_addr + REG_VPD_CAP);
- ioread32(hw->hw_addr + REG_VPD_CAP);
-
- for (i = 0; i < 10; i++) {
- msleep(2);
- control = ioread32(hw->hw_addr + REG_VPD_CAP);
- if (control & VPD_CAP_VPD_FLAG)
- break;
- }
- if (control & VPD_CAP_VPD_FLAG) {
- *p_value = ioread32(hw->hw_addr + REG_VPD_DATA);
- return true;
- }
- return false; /* timeout */
-}
-
-/*
- * Reads the value from a PHY register
- * hw - Struct containing variables accessed by shared code
- * reg_addr - address of the PHY register to read
- */
-s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data)
-{
- u32 val;
- int i;
-
- val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
- MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 <<
- MDIO_CLK_SEL_SHIFT;
- iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
- ioread32(hw->hw_addr + REG_MDIO_CTRL);
-
- for (i = 0; i < MDIO_WAIT_TIMES; i++) {
- udelay(2);
- val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
- if (!(val & (MDIO_START | MDIO_BUSY)))
- break;
- }
- if (!(val & (MDIO_START | MDIO_BUSY))) {
- *phy_data = (u16) val;
- return ATL1_SUCCESS;
- }
- return ATL1_ERR_PHY;
-}
-
-#define CUSTOM_SPI_CS_SETUP 2
-#define CUSTOM_SPI_CLK_HI 2
-#define CUSTOM_SPI_CLK_LO 2
-#define CUSTOM_SPI_CS_HOLD 2
-#define CUSTOM_SPI_CS_HI 3
-
-static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf)
-{
- int i;
- u32 value;
-
- iowrite32(0, hw->hw_addr + REG_SPI_DATA);
- iowrite32(addr, hw->hw_addr + REG_SPI_ADDR);
-
- value = SPI_FLASH_CTRL_WAIT_READY |
- (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
- SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI &
- SPI_FLASH_CTRL_CLK_HI_MASK) <<
- SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO &
- SPI_FLASH_CTRL_CLK_LO_MASK) <<
- SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD &
- SPI_FLASH_CTRL_CS_HOLD_MASK) <<
- SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI &
- SPI_FLASH_CTRL_CS_HI_MASK) <<
- SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) <<
- SPI_FLASH_CTRL_INS_SHIFT;
-
- iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
-
- value |= SPI_FLASH_CTRL_START;
- iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
- ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
-
- for (i = 0; i < 10; i++) {
- msleep(1); /* 1ms */
- value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
- if (!(value & SPI_FLASH_CTRL_START))
- break;
- }
-
- if (value & SPI_FLASH_CTRL_START)
- return false;
-
- *buf = ioread32(hw->hw_addr + REG_SPI_DATA);
-
- return true;
-}
-
-/*
- * get_permanent_address
- * return 0 if get valid mac address,
- */
-static int atl1_get_permanent_address(struct atl1_hw *hw)
-{
- u32 addr[2];
- u32 i, control;
- u16 reg;
- u8 eth_addr[ETH_ALEN];
- bool key_valid;
-
- if (is_valid_ether_addr(hw->perm_mac_addr))
- return 0;
-
- /* init */
- addr[0] = addr[1] = 0;
-
- if (!atl1_check_eeprom_exist(hw)) { /* eeprom exist */
- reg = 0;
- key_valid = false;
- /* Read out all EEPROM content */
- i = 0;
- while (1) {
- if (atl1_read_eeprom(hw, i + 0x100, &control)) {
- if (key_valid) {
- if (reg == REG_MAC_STA_ADDR)
- addr[0] = control;
- else if (reg == (REG_MAC_STA_ADDR + 4))
- addr[1] = control;
- key_valid = false;
- } else if ((control & 0xff) == 0x5A) {
- key_valid = true;
- reg = (u16) (control >> 16);
- } else
- break; /* assume data end while encount an invalid KEYWORD */
- } else
- break; /* read error */
- i += 4;
- }
-
- *(u32 *) &eth_addr[2] = swab32(addr[0]);
- *(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
- if (is_valid_ether_addr(eth_addr)) {
- memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
- return 0;
- }
- return 1;
- }
-
- /* see if SPI FLAGS exist ? */
- addr[0] = addr[1] = 0;
- reg = 0;
- key_valid = false;
- i = 0;
- while (1) {
- if (atl1_spi_read(hw, i + 0x1f000, &control)) {
- if (key_valid) {
- if (reg == REG_MAC_STA_ADDR)
- addr[0] = control;
- else if (reg == (REG_MAC_STA_ADDR + 4))
- addr[1] = control;
- key_valid = false;
- } else if ((control & 0xff) == 0x5A) {
- key_valid = true;
- reg = (u16) (control >> 16);
- } else
- break; /* data end */
- } else
- break; /* read error */
- i += 4;
- }
-
- *(u32 *) &eth_addr[2] = swab32(addr[0]);
- *(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
- if (is_valid_ether_addr(eth_addr)) {
- memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
- return 0;
- }
-
- /*
- * On some motherboards, the MAC address is written by the
- * BIOS directly to the MAC register during POST, and is
- * not stored in eeprom. If all else thus far has failed
- * to fetch the permanent MAC address, try reading it directly.
- */
- addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR);
- addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4));
- *(u32 *) &eth_addr[2] = swab32(addr[0]);
- *(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
- if (is_valid_ether_addr(eth_addr)) {
- memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
- return 0;
- }
-
- return 1;
-}
-
-/*
- * Reads the adapter's MAC address from the EEPROM
- * hw - Struct containing variables accessed by shared code
- */
-s32 atl1_read_mac_addr(struct atl1_hw *hw)
-{
- u16 i;
-
- if (atl1_get_permanent_address(hw))
- random_ether_addr(hw->perm_mac_addr);
-
- for (i = 0; i < ETH_ALEN; i++)
- hw->mac_addr[i] = hw->perm_mac_addr[i];
- return ATL1_SUCCESS;
-}
-
-/*
- * Hashes an address to determine its location in the multicast table
- * hw - Struct containing variables accessed by shared code
- * mc_addr - the multicast address to hash
- *
- * atl1_hash_mc_addr
- * purpose
- * set hash value for a multicast address
- * hash calcu processing :
- * 1. calcu 32bit CRC for multicast address
- * 2. reverse crc with MSB to LSB
- */
-u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr)
-{
- u32 crc32, value = 0;
- int i;
-
- crc32 = ether_crc_le(6, mc_addr);
- for (i = 0; i < 32; i++)
- value |= (((crc32 >> i) & 1) << (31 - i));
-
- return value;
-}
-
-/*
- * Sets the bit in the multicast table corresponding to the hash value.
- * hw - Struct containing variables accessed by shared code
- * hash_value - Multicast address hash value
- */
-void atl1_hash_set(struct atl1_hw *hw, u32 hash_value)
-{
- u32 hash_bit, hash_reg;
- u32 mta;
-
- /*
- * The HASH Table is a register array of 2 32-bit registers.
- * It is treated like an array of 64 bits. We want to set
- * bit BitArray[hash_value]. So we figure out what register
- * the bit is in, read it, OR in the new bit, then write
- * back the new value. The register is determined by the
- * upper 7 bits of the hash value and the bit within that
- * register are determined by the lower 5 bits of the value.
- */
- hash_reg = (hash_value >> 31) & 0x1;
- hash_bit = (hash_value >> 26) & 0x1F;
- mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
- mta |= (1 << hash_bit);
- iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
-}
-
-/*
- * Writes a value to a PHY register
- * hw - Struct containing variables accessed by shared code
- * reg_addr - address of the PHY register to write
- * data - data to write to the PHY
- */
-s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data)
-{
- int i;
- u32 val;
-
- val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
- (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
- MDIO_SUP_PREAMBLE |
- MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
- iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
- ioread32(hw->hw_addr + REG_MDIO_CTRL);
-
- for (i = 0; i < MDIO_WAIT_TIMES; i++) {
- udelay(2);
- val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
- if (!(val & (MDIO_START | MDIO_BUSY)))
- break;
- }
-
- if (!(val & (MDIO_START | MDIO_BUSY)))
- return ATL1_SUCCESS;
-
- return ATL1_ERR_PHY;
-}
-
-/*
- * Make L001's PHY out of Power Saving State (bug)
- * hw - Struct containing variables accessed by shared code
- * when power on, L001's PHY always on Power saving State
- * (Gigabit Link forbidden)
- */
-static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw)
-{
- s32 ret;
- ret = atl1_write_phy_reg(hw, 29, 0x0029);
- if (ret)
- return ret;
- return atl1_write_phy_reg(hw, 30, 0);
-}
-
-/*
- *TODO: do something or get rid of this
- */
-s32 atl1_phy_enter_power_saving(struct atl1_hw *hw)
-{
-/* s32 ret_val;
- * u16 phy_data;
- */
-
-/*
- ret_val = atl1_write_phy_reg(hw, ...);
- ret_val = atl1_write_phy_reg(hw, ...);
- ....
-*/
- return ATL1_SUCCESS;
-}
-
-/*
- * Resets the PHY and make all config validate
- * hw - Struct containing variables accessed by shared code
- *
- * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
- */
-static s32 atl1_phy_reset(struct atl1_hw *hw)
-{
- struct pci_dev *pdev = hw->back->pdev;
- s32 ret_val;
- u16 phy_data;
-
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
- hw->media_type == MEDIA_TYPE_1000M_FULL)
- phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
- else {
- switch (hw->media_type) {
- case MEDIA_TYPE_100M_FULL:
- phy_data =
- MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
- MII_CR_RESET;
- break;
- case MEDIA_TYPE_100M_HALF:
- phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
- break;
- case MEDIA_TYPE_10M_FULL:
- phy_data =
- MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
- break;
- default: /* MEDIA_TYPE_10M_HALF: */
- phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
- break;
- }
- }
-
- ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data);
- if (ret_val) {
- u32 val;
- int i;
- /* pcie serdes link may be down! */
- dev_dbg(&pdev->dev, "pcie phy link down\n");
-
- for (i = 0; i < 25; i++) {
- msleep(1);
- val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
- if (!(val & (MDIO_START | MDIO_BUSY)))
- break;
- }
-
- if ((val & (MDIO_START | MDIO_BUSY)) != 0) {
- dev_warn(&pdev->dev, "pcie link down at least 25ms\n");
- return ret_val;
- }
- }
- return ATL1_SUCCESS;
-}
-
-/*
- * Configures PHY autoneg and flow control advertisement settings
- * hw - Struct containing variables accessed by shared code
- */
-s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw)
-{
- s32 ret_val;
- s16 mii_autoneg_adv_reg;
- s16 mii_1000t_ctrl_reg;
-
- /* Read the MII Auto-Neg Advertisement Register (Address 4). */
- mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
-
- /* Read the MII 1000Base-T Control Register (Address 9). */
- mii_1000t_ctrl_reg = MII_AT001_CR_1000T_DEFAULT_CAP_MASK;
-
- /*
- * First we clear all the 10/100 mb speed bits in the Auto-Neg
- * Advertisement Register (Address 4) and the 1000 mb speed bits in
- * the 1000Base-T Control Register (Address 9).
- */
- mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
- mii_1000t_ctrl_reg &= ~MII_AT001_CR_1000T_SPEED_MASK;
-
- /*
- * Need to parse media_type and set up
- * the appropriate PHY registers.
- */
- switch (hw->media_type) {
- case MEDIA_TYPE_AUTO_SENSOR:
- mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS |
- MII_AR_10T_FD_CAPS |
- MII_AR_100TX_HD_CAPS |
- MII_AR_100TX_FD_CAPS);
- mii_1000t_ctrl_reg |= MII_AT001_CR_1000T_FD_CAPS;
- break;
-
- case MEDIA_TYPE_1000M_FULL:
- mii_1000t_ctrl_reg |= MII_AT001_CR_1000T_FD_CAPS;
- break;
-
- case MEDIA_TYPE_100M_FULL:
- mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
- break;
-
- case MEDIA_TYPE_100M_HALF:
- mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
- break;
-
- case MEDIA_TYPE_10M_FULL:
- mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
- break;
-
- default:
- mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
- break;
- }
-
- /* flow control fixed to enable all */
- mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
-
- hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
- hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg;
-
- ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
- if (ret_val)
- return ret_val;
-
- ret_val = atl1_write_phy_reg(hw, MII_AT001_CR, mii_1000t_ctrl_reg);
- if (ret_val)
- return ret_val;
-
- return ATL1_SUCCESS;
-}
-
-/*
- * Configures link settings.
- * hw - Struct containing variables accessed by shared code
- * Assumes the hardware has previously been reset and the
- * transmitter and receiver are not enabled.
- */
-static s32 atl1_setup_link(struct atl1_hw *hw)
-{
- struct pci_dev *pdev = hw->back->pdev;
- s32 ret_val;
-
- /*
- * Options:
- * PHY will advertise value(s) parsed from
- * autoneg_advertised and fc
- * no matter what autoneg is , We will not wait link result.
- */
- ret_val = atl1_phy_setup_autoneg_adv(hw);
- if (ret_val) {
- dev_dbg(&pdev->dev, "error setting up autonegotiation\n");
- return ret_val;
- }
- /* SW.Reset , En-Auto-Neg if needed */
- ret_val = atl1_phy_reset(hw);
- if (ret_val) {
- dev_dbg(&pdev->dev, "error resetting phy\n");
- return ret_val;
- }
- hw->phy_configured = true;
- return ret_val;
-}
-
-static struct atl1_spi_flash_dev flash_table[] = {
-/* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SECTOR_ERASE CHIP_ERASE */
- {"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62},
- {"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60},
- {"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7},
-};
-
-static void atl1_init_flash_opcode(struct atl1_hw *hw)
-{
- if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
- hw->flash_vendor = 0; /* ATMEL */
-
- /* Init OP table */
- iowrite8(flash_table[hw->flash_vendor].cmd_program,
- hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM);
- iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase,
- hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE);
- iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase,
- hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE);
- iowrite8(flash_table[hw->flash_vendor].cmd_rdid,
- hw->hw_addr + REG_SPI_FLASH_OP_RDID);
- iowrite8(flash_table[hw->flash_vendor].cmd_wren,
- hw->hw_addr + REG_SPI_FLASH_OP_WREN);
- iowrite8(flash_table[hw->flash_vendor].cmd_rdsr,
- hw->hw_addr + REG_SPI_FLASH_OP_RDSR);
- iowrite8(flash_table[hw->flash_vendor].cmd_wrsr,
- hw->hw_addr + REG_SPI_FLASH_OP_WRSR);
- iowrite8(flash_table[hw->flash_vendor].cmd_read,
- hw->hw_addr + REG_SPI_FLASH_OP_READ);
-}
-
-/*
- * Performs basic configuration of the adapter.
- * hw - Struct containing variables accessed by shared code
- * Assumes that the controller has previously been reset and is in a
- * post-reset uninitialized state. Initializes multicast table,
- * and Calls routines to setup link
- * Leaves the transmit and receive units disabled and uninitialized.
- */
-s32 atl1_init_hw(struct atl1_hw *hw)
-{
- u32 ret_val = 0;
-
- /* Zero out the Multicast HASH table */
- iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
- /* clear the old settings from the multicast hash table */
- iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
-
- atl1_init_flash_opcode(hw);
-
- if (!hw->phy_configured) {
- /* enable GPHY LinkChange Interrrupt */
- ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
- if (ret_val)
- return ret_val;
- /* make PHY out of power-saving state */
- ret_val = atl1_phy_leave_power_saving(hw);
- if (ret_val)
- return ret_val;
- /* Call a subroutine to configure the link */
- ret_val = atl1_setup_link(hw);
- }
- return ret_val;
-}
-
-/*
- * Detects the current speed and duplex settings of the hardware.
- * hw - Struct containing variables accessed by shared code
- * speed - Speed of the connection
- * duplex - Duplex setting of the connection
- */
-s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex)
-{
- struct pci_dev *pdev = hw->back->pdev;
- s32 ret_val;
- u16 phy_data;
-
- /* ; --- Read PHY Specific Status Register (17) */
- ret_val = atl1_read_phy_reg(hw, MII_AT001_PSSR, &phy_data);
- if (ret_val)
- return ret_val;
-
- if (!(phy_data & MII_AT001_PSSR_SPD_DPLX_RESOLVED))
- return ATL1_ERR_PHY_RES;
-
- switch (phy_data & MII_AT001_PSSR_SPEED) {
- case MII_AT001_PSSR_1000MBS:
- *speed = SPEED_1000;
- break;
- case MII_AT001_PSSR_100MBS:
- *speed = SPEED_100;
- break;
- case MII_AT001_PSSR_10MBS:
- *speed = SPEED_10;
- break;
- default:
- dev_dbg(&pdev->dev, "error getting speed\n");
- return ATL1_ERR_PHY_SPEED;
- break;
- }
- if (phy_data & MII_AT001_PSSR_DPLX)
- *duplex = FULL_DUPLEX;
- else
- *duplex = HALF_DUPLEX;
-
- return ATL1_SUCCESS;
-}
-
-void atl1_set_mac_addr(struct atl1_hw *hw)
-{
- u32 value;
- /*
- * 00-0B-6A-F6-00-DC
- * 0: 6AF600DC 1: 000B
- * low dword
- */
- value = (((u32) hw->mac_addr[2]) << 24) |
- (((u32) hw->mac_addr[3]) << 16) |
- (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5]));
- iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
- /* high dword */
- value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
- iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2));
-}
diff --git a/drivers/net/atlx/atl1_hw.h b/drivers/net/atlx/atl1_hw.h
deleted file mode 100644
index 939aa0f53f6e..000000000000
--- a/drivers/net/atlx/atl1_hw.h
+++ /dev/null
@@ -1,946 +0,0 @@
-/*
- * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
- * Copyright(c) 2006 Chris Snook <csnook@redhat.com>
- * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
- *
- * Derived from Intel e1000 driver
- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * There are a lot of defines in here that are unused and/or have cryptic
- * names. Please leave them alone, as they're the closest thing we have
- * to a spec from Attansic at present. *ahem* -- CHS
- */
-
-#ifndef _ATL1_HW_H_
-#define _ATL1_HW_H_
-
-#include <linux/types.h>
-#include <linux/mii.h>
-
-struct atl1_adapter;
-struct atl1_hw;
-
-/* function prototypes needed by multiple files */
-s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw);
-s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data);
-s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex);
-s32 atl1_read_mac_addr(struct atl1_hw *hw);
-s32 atl1_init_hw(struct atl1_hw *hw);
-s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex);
-s32 atl1_set_speed_and_duplex(struct atl1_hw *hw, u16 speed, u16 duplex);
-u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr);
-void atl1_hash_set(struct atl1_hw *hw, u32 hash_value);
-s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data);
-void atl1_set_mac_addr(struct atl1_hw *hw);
-s32 atl1_phy_enter_power_saving(struct atl1_hw *hw);
-s32 atl1_reset_hw(struct atl1_hw *hw);
-void atl1_check_options(struct atl1_adapter *adapter);
-
-/* register definitions */
-#define REG_PCIE_CAP_LIST 0x58
-
-#define REG_VPD_CAP 0x6C
-#define VPD_CAP_ID_MASK 0xff
-#define VPD_CAP_ID_SHIFT 0
-#define VPD_CAP_NEXT_PTR_MASK 0xFF
-#define VPD_CAP_NEXT_PTR_SHIFT 8
-#define VPD_CAP_VPD_ADDR_MASK 0x7FFF
-#define VPD_CAP_VPD_ADDR_SHIFT 16
-#define VPD_CAP_VPD_FLAG 0x80000000
-
-#define REG_VPD_DATA 0x70
-
-#define REG_SPI_FLASH_CTRL 0x200
-#define SPI_FLASH_CTRL_STS_NON_RDY 0x1
-#define SPI_FLASH_CTRL_STS_WEN 0x2
-#define SPI_FLASH_CTRL_STS_WPEN 0x80
-#define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF
-#define SPI_FLASH_CTRL_DEV_STS_SHIFT 0
-#define SPI_FLASH_CTRL_INS_MASK 0x7
-#define SPI_FLASH_CTRL_INS_SHIFT 8
-#define SPI_FLASH_CTRL_START 0x800
-#define SPI_FLASH_CTRL_EN_VPD 0x2000
-#define SPI_FLASH_CTRL_LDSTART 0x8000
-#define SPI_FLASH_CTRL_CS_HI_MASK 0x3
-#define SPI_FLASH_CTRL_CS_HI_SHIFT 16
-#define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3
-#define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18
-#define SPI_FLASH_CTRL_CLK_LO_MASK 0x3
-#define SPI_FLASH_CTRL_CLK_LO_SHIFT 20
-#define SPI_FLASH_CTRL_CLK_HI_MASK 0x3
-#define SPI_FLASH_CTRL_CLK_HI_SHIFT 22
-#define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3
-#define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24
-#define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3
-#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26
-#define SPI_FLASH_CTRL_WAIT_READY 0x10000000
-
-#define REG_SPI_ADDR 0x204
-
-#define REG_SPI_DATA 0x208
-
-#define REG_SPI_FLASH_CONFIG 0x20C
-#define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF
-#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0
-#define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3
-#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24
-#define SPI_FLASH_CONFIG_LD_EXIST 0x4000000
-
-#define REG_SPI_FLASH_OP_PROGRAM 0x210
-#define REG_SPI_FLASH_OP_SC_ERASE 0x211
-#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212
-#define REG_SPI_FLASH_OP_RDID 0x213
-#define REG_SPI_FLASH_OP_WREN 0x214
-#define REG_SPI_FLASH_OP_RDSR 0x215
-#define REG_SPI_FLASH_OP_WRSR 0x216
-#define REG_SPI_FLASH_OP_READ 0x217
-
-#define REG_TWSI_CTRL 0x218
-#define TWSI_CTRL_LD_OFFSET_MASK 0xFF
-#define TWSI_CTRL_LD_OFFSET_SHIFT 0
-#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7
-#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8
-#define TWSI_CTRL_SW_LDSTART 0x800
-#define TWSI_CTRL_HW_LDSTART 0x1000
-#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F
-#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15
-#define TWSI_CTRL_LD_EXIST 0x400000
-#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3
-#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23
-#define TWSI_CTRL_FREQ_SEL_100K 0
-#define TWSI_CTRL_FREQ_SEL_200K 1
-#define TWSI_CTRL_FREQ_SEL_300K 2
-#define TWSI_CTRL_FREQ_SEL_400K 3
-#define TWSI_CTRL_SMB_SLV_ADDR
-#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3
-#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24
-
-#define REG_PCIE_DEV_MISC_CTRL 0x21C
-#define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2
-#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1
-#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4
-#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8
-#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10
-
-/* Selene Master Control Register */
-#define REG_MASTER_CTRL 0x1400
-#define MASTER_CTRL_SOFT_RST 0x1
-#define MASTER_CTRL_MTIMER_EN 0x2
-#define MASTER_CTRL_ITIMER_EN 0x4
-#define MASTER_CTRL_MANUAL_INT 0x8
-#define MASTER_CTRL_REV_NUM_SHIFT 16
-#define MASTER_CTRL_REV_NUM_MASK 0xff
-#define MASTER_CTRL_DEV_ID_SHIFT 24
-#define MASTER_CTRL_DEV_ID_MASK 0xff
-
-/* Timer Initial Value Register */
-#define REG_MANUAL_TIMER_INIT 0x1404
-
-/* IRQ ModeratorTimer Initial Value Register */
-#define REG_IRQ_MODU_TIMER_INIT 0x1408
-
-#define REG_GPHY_ENABLE 0x140C
-
-/* IRQ Anti-Lost Timer Initial Value Register */
-#define REG_CMBDISDMA_TIMER 0x140E
-
-/* Block IDLE Status Register */
-#define REG_IDLE_STATUS 0x1410
-#define IDLE_STATUS_RXMAC 1
-#define IDLE_STATUS_TXMAC 2
-#define IDLE_STATUS_RXQ 4
-#define IDLE_STATUS_TXQ 8
-#define IDLE_STATUS_DMAR 0x10
-#define IDLE_STATUS_DMAW 0x20
-#define IDLE_STATUS_SMB 0x40
-#define IDLE_STATUS_CMB 0x80
-
-/* MDIO Control Register */
-#define REG_MDIO_CTRL 0x1414
-#define MDIO_DATA_MASK 0xffff
-#define MDIO_DATA_SHIFT 0
-#define MDIO_REG_ADDR_MASK 0x1f
-#define MDIO_REG_ADDR_SHIFT 16
-#define MDIO_RW 0x200000
-#define MDIO_SUP_PREAMBLE 0x400000
-#define MDIO_START 0x800000
-#define MDIO_CLK_SEL_SHIFT 24
-#define MDIO_CLK_25_4 0
-#define MDIO_CLK_25_6 2
-#define MDIO_CLK_25_8 3
-#define MDIO_CLK_25_10 4
-#define MDIO_CLK_25_14 5
-#define MDIO_CLK_25_20 6
-#define MDIO_CLK_25_28 7
-#define MDIO_BUSY 0x8000000
-#define MDIO_WAIT_TIMES 30
-
-/* MII PHY Status Register */
-#define REG_PHY_STATUS 0x1418
-
-/* BIST Control and Status Register0 (for the Packet Memory) */
-#define REG_BIST0_CTRL 0x141c
-#define BIST0_NOW 0x1
-#define BIST0_SRAM_FAIL 0x2
-#define BIST0_FUSE_FLAG 0x4
-#define REG_BIST1_CTRL 0x1420
-#define BIST1_NOW 0x1
-#define BIST1_SRAM_FAIL 0x2
-#define BIST1_FUSE_FLAG 0x4
-
-/* MAC Control Register */
-#define REG_MAC_CTRL 0x1480
-#define MAC_CTRL_TX_EN 1
-#define MAC_CTRL_RX_EN 2
-#define MAC_CTRL_TX_FLOW 4
-#define MAC_CTRL_RX_FLOW 8
-#define MAC_CTRL_LOOPBACK 0x10
-#define MAC_CTRL_DUPLX 0x20
-#define MAC_CTRL_ADD_CRC 0x40
-#define MAC_CTRL_PAD 0x80
-#define MAC_CTRL_LENCHK 0x100
-#define MAC_CTRL_HUGE_EN 0x200
-#define MAC_CTRL_PRMLEN_SHIFT 10
-#define MAC_CTRL_PRMLEN_MASK 0xf
-#define MAC_CTRL_RMV_VLAN 0x4000
-#define MAC_CTRL_PROMIS_EN 0x8000
-#define MAC_CTRL_TX_PAUSE 0x10000
-#define MAC_CTRL_SCNT 0x20000
-#define MAC_CTRL_SRST_TX 0x40000
-#define MAC_CTRL_TX_SIMURST 0x80000
-#define MAC_CTRL_SPEED_SHIFT 20
-#define MAC_CTRL_SPEED_MASK 0x300000
-#define MAC_CTRL_SPEED_1000 2
-#define MAC_CTRL_SPEED_10_100 1
-#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000
-#define MAC_CTRL_TX_HUGE 0x800000
-#define MAC_CTRL_RX_CHKSUM_EN 0x1000000
-#define MAC_CTRL_MC_ALL_EN 0x2000000
-#define MAC_CTRL_BC_EN 0x4000000
-#define MAC_CTRL_DBG 0x8000000
-
-/* MAC IPG/IFG Control Register */
-#define REG_MAC_IPG_IFG 0x1484
-#define MAC_IPG_IFG_IPGT_SHIFT 0
-#define MAC_IPG_IFG_IPGT_MASK 0x7f
-#define MAC_IPG_IFG_MIFG_SHIFT 8
-#define MAC_IPG_IFG_MIFG_MASK 0xff
-#define MAC_IPG_IFG_IPGR1_SHIFT 16
-#define MAC_IPG_IFG_IPGR1_MASK 0x7f
-#define MAC_IPG_IFG_IPGR2_SHIFT 24
-#define MAC_IPG_IFG_IPGR2_MASK 0x7f
-
-/* MAC STATION ADDRESS */
-#define REG_MAC_STA_ADDR 0x1488
-
-/* Hash table for multicast address */
-#define REG_RX_HASH_TABLE 0x1490
-
-/* MAC Half-Duplex Control Register */
-#define REG_MAC_HALF_DUPLX_CTRL 0x1498
-#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0
-#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff
-#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12
-#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf
-#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000
-#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000
-#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000
-#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000
-#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20
-#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf
-#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24
-#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf
-
-/* Maximum Frame Length Control Register */
-#define REG_MTU 0x149c
-
-/* Wake-On-Lan control register */
-#define REG_WOL_CTRL 0x14a0
-#define WOL_PATTERN_EN 0x00000001
-#define WOL_PATTERN_PME_EN 0x00000002
-#define WOL_MAGIC_EN 0x00000004
-#define WOL_MAGIC_PME_EN 0x00000008
-#define WOL_LINK_CHG_EN 0x00000010
-#define WOL_LINK_CHG_PME_EN 0x00000020
-#define WOL_PATTERN_ST 0x00000100
-#define WOL_MAGIC_ST 0x00000200
-#define WOL_LINKCHG_ST 0x00000400
-#define WOL_CLK_SWITCH_EN 0x00008000
-#define WOL_PT0_EN 0x00010000
-#define WOL_PT1_EN 0x00020000
-#define WOL_PT2_EN 0x00040000
-#define WOL_PT3_EN 0x00080000
-#define WOL_PT4_EN 0x00100000
-#define WOL_PT5_EN 0x00200000
-#define WOL_PT6_EN 0x00400000
-
-/* WOL Length ( 2 DWORD ) */
-#define REG_WOL_PATTERN_LEN 0x14a4
-#define WOL_PT_LEN_MASK 0x7f
-#define WOL_PT0_LEN_SHIFT 0
-#define WOL_PT1_LEN_SHIFT 8
-#define WOL_PT2_LEN_SHIFT 16
-#define WOL_PT3_LEN_SHIFT 24
-#define WOL_PT4_LEN_SHIFT 0
-#define WOL_PT5_LEN_SHIFT 8
-#define WOL_PT6_LEN_SHIFT 16
-
-/* Internal SRAM Partition Register */
-#define REG_SRAM_RFD_ADDR 0x1500
-#define REG_SRAM_RFD_LEN (REG_SRAM_RFD_ADDR+ 4)
-#define REG_SRAM_RRD_ADDR (REG_SRAM_RFD_ADDR+ 8)
-#define REG_SRAM_RRD_LEN (REG_SRAM_RFD_ADDR+12)
-#define REG_SRAM_TPD_ADDR (REG_SRAM_RFD_ADDR+16)
-#define REG_SRAM_TPD_LEN (REG_SRAM_RFD_ADDR+20)
-#define REG_SRAM_TRD_ADDR (REG_SRAM_RFD_ADDR+24)
-#define REG_SRAM_TRD_LEN (REG_SRAM_RFD_ADDR+28)
-#define REG_SRAM_RXF_ADDR (REG_SRAM_RFD_ADDR+32)
-#define REG_SRAM_RXF_LEN (REG_SRAM_RFD_ADDR+36)
-#define REG_SRAM_TXF_ADDR (REG_SRAM_RFD_ADDR+40)
-#define REG_SRAM_TXF_LEN (REG_SRAM_RFD_ADDR+44)
-#define REG_SRAM_TCPH_PATH_ADDR (REG_SRAM_RFD_ADDR+48)
-#define SRAM_TCPH_ADDR_MASK 0x0fff
-#define SRAM_TCPH_ADDR_SHIFT 0
-#define SRAM_PATH_ADDR_MASK 0x0fff
-#define SRAM_PATH_ADDR_SHIFT 16
-
-/* Load Ptr Register */
-#define REG_LOAD_PTR (REG_SRAM_RFD_ADDR+52)
-
-/* Descriptor Control register */
-#define REG_DESC_BASE_ADDR_HI 0x1540
-#define REG_DESC_RFD_ADDR_LO (REG_DESC_BASE_ADDR_HI+4)
-#define REG_DESC_RRD_ADDR_LO (REG_DESC_BASE_ADDR_HI+8)
-#define REG_DESC_TPD_ADDR_LO (REG_DESC_BASE_ADDR_HI+12)
-#define REG_DESC_CMB_ADDR_LO (REG_DESC_BASE_ADDR_HI+16)
-#define REG_DESC_SMB_ADDR_LO (REG_DESC_BASE_ADDR_HI+20)
-#define REG_DESC_RFD_RRD_RING_SIZE (REG_DESC_BASE_ADDR_HI+24)
-#define DESC_RFD_RING_SIZE_MASK 0x7ff
-#define DESC_RFD_RING_SIZE_SHIFT 0
-#define DESC_RRD_RING_SIZE_MASK 0x7ff
-#define DESC_RRD_RING_SIZE_SHIFT 16
-#define REG_DESC_TPD_RING_SIZE (REG_DESC_BASE_ADDR_HI+28)
-#define DESC_TPD_RING_SIZE_MASK 0x3ff
-#define DESC_TPD_RING_SIZE_SHIFT 0
-
-/* TXQ Control Register */
-#define REG_TXQ_CTRL 0x1580
-#define TXQ_CTRL_TPD_BURST_NUM_SHIFT 0
-#define TXQ_CTRL_TPD_BURST_NUM_MASK 0x1f
-#define TXQ_CTRL_EN 0x20
-#define TXQ_CTRL_ENH_MODE 0x40
-#define TXQ_CTRL_TPD_FETCH_TH_SHIFT 8
-#define TXQ_CTRL_TPD_FETCH_TH_MASK 0x3f
-#define TXQ_CTRL_TXF_BURST_NUM_SHIFT 16
-#define TXQ_CTRL_TXF_BURST_NUM_MASK 0xffff
-
-/* Jumbo packet Threshold for task offload */
-#define REG_TX_JUMBO_TASK_TH_TPD_IPG 0x1584
-#define TX_JUMBO_TASK_TH_MASK 0x7ff
-#define TX_JUMBO_TASK_TH_SHIFT 0
-#define TX_TPD_MIN_IPG_MASK 0x1f
-#define TX_TPD_MIN_IPG_SHIFT 16
-
-/* RXQ Control Register */
-#define REG_RXQ_CTRL 0x15a0
-#define RXQ_CTRL_RFD_BURST_NUM_SHIFT 0
-#define RXQ_CTRL_RFD_BURST_NUM_MASK 0xff
-#define RXQ_CTRL_RRD_BURST_THRESH_SHIFT 8
-#define RXQ_CTRL_RRD_BURST_THRESH_MASK 0xff
-#define RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT 16
-#define RXQ_CTRL_RFD_PREF_MIN_IPG_MASK 0x1f
-#define RXQ_CTRL_CUT_THRU_EN 0x40000000
-#define RXQ_CTRL_EN 0x80000000
-
-/* Rx jumbo packet threshold and rrd retirement timer */
-#define REG_RXQ_JMBOSZ_RRDTIM (REG_RXQ_CTRL+ 4)
-#define RXQ_JMBOSZ_TH_MASK 0x7ff
-#define RXQ_JMBOSZ_TH_SHIFT 0
-#define RXQ_JMBO_LKAH_MASK 0xf
-#define RXQ_JMBO_LKAH_SHIFT 11
-#define RXQ_RRD_TIMER_MASK 0xffff
-#define RXQ_RRD_TIMER_SHIFT 16
-
-/* RFD flow control register */
-#define REG_RXQ_RXF_PAUSE_THRESH (REG_RXQ_CTRL+ 8)
-#define RXQ_RXF_PAUSE_TH_HI_SHIFT 16
-#define RXQ_RXF_PAUSE_TH_HI_MASK 0xfff
-#define RXQ_RXF_PAUSE_TH_LO_SHIFT 0
-#define RXQ_RXF_PAUSE_TH_LO_MASK 0xfff
-
-/* RRD flow control register */
-#define REG_RXQ_RRD_PAUSE_THRESH (REG_RXQ_CTRL+12)
-#define RXQ_RRD_PAUSE_TH_HI_SHIFT 0
-#define RXQ_RRD_PAUSE_TH_HI_MASK 0xfff
-#define RXQ_RRD_PAUSE_TH_LO_SHIFT 16
-#define RXQ_RRD_PAUSE_TH_LO_MASK 0xfff
-
-/* DMA Engine Control Register */
-#define REG_DMA_CTRL 0x15c0
-#define DMA_CTRL_DMAR_IN_ORDER 0x1
-#define DMA_CTRL_DMAR_ENH_ORDER 0x2
-#define DMA_CTRL_DMAR_OUT_ORDER 0x4
-#define DMA_CTRL_RCB_VALUE 0x8
-#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4
-#define DMA_CTRL_DMAR_BURST_LEN_MASK 7
-#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7
-#define DMA_CTRL_DMAW_BURST_LEN_MASK 7
-#define DMA_CTRL_DMAR_EN 0x400
-#define DMA_CTRL_DMAW_EN 0x800
-
-/* CMB/SMB Control Register */
-#define REG_CSMB_CTRL 0x15d0
-#define CSMB_CTRL_CMB_NOW 1
-#define CSMB_CTRL_SMB_NOW 2
-#define CSMB_CTRL_CMB_EN 4
-#define CSMB_CTRL_SMB_EN 8
-
-/* CMB DMA Write Threshold Register */
-#define REG_CMB_WRITE_TH (REG_CSMB_CTRL+ 4)
-#define CMB_RRD_TH_SHIFT 0
-#define CMB_RRD_TH_MASK 0x7ff
-#define CMB_TPD_TH_SHIFT 16
-#define CMB_TPD_TH_MASK 0x7ff
-
-/* RX/TX count-down timer to trigger CMB-write. 2us resolution. */
-#define REG_CMB_WRITE_TIMER (REG_CSMB_CTRL+ 8)
-#define CMB_RX_TM_SHIFT 0
-#define CMB_RX_TM_MASK 0xffff
-#define CMB_TX_TM_SHIFT 16
-#define CMB_TX_TM_MASK 0xffff
-
-/* Number of packet received since last CMB write */
-#define REG_CMB_RX_PKT_CNT (REG_CSMB_CTRL+12)
-
-/* Number of packet transmitted since last CMB write */
-#define REG_CMB_TX_PKT_CNT (REG_CSMB_CTRL+16)
-
-/* SMB auto DMA timer register */
-#define REG_SMB_TIMER (REG_CSMB_CTRL+20)
-
-/* Mailbox Register */
-#define REG_MAILBOX 0x15f0
-#define MB_RFD_PROD_INDX_SHIFT 0
-#define MB_RFD_PROD_INDX_MASK 0x7ff
-#define MB_RRD_CONS_INDX_SHIFT 11
-#define MB_RRD_CONS_INDX_MASK 0x7ff
-#define MB_TPD_PROD_INDX_SHIFT 22
-#define MB_TPD_PROD_INDX_MASK 0x3ff
-
-/* Interrupt Status Register */
-#define REG_ISR 0x1600
-#define ISR_SMB 1
-#define ISR_TIMER 2
-#define ISR_MANUAL 4
-#define ISR_RXF_OV 8
-#define ISR_RFD_UNRUN 0x10
-#define ISR_RRD_OV 0x20
-#define ISR_TXF_UNRUN 0x40
-#define ISR_LINK 0x80
-#define ISR_HOST_RFD_UNRUN 0x100
-#define ISR_HOST_RRD_OV 0x200
-#define ISR_DMAR_TO_RST 0x400
-#define ISR_DMAW_TO_RST 0x800
-#define ISR_GPHY 0x1000
-#define ISR_RX_PKT 0x10000
-#define ISR_TX_PKT 0x20000
-#define ISR_TX_DMA 0x40000
-#define ISR_RX_DMA 0x80000
-#define ISR_CMB_RX 0x100000
-#define ISR_CMB_TX 0x200000
-#define ISR_MAC_RX 0x400000
-#define ISR_MAC_TX 0x800000
-#define ISR_UR_DETECTED 0x1000000
-#define ISR_FERR_DETECTED 0x2000000
-#define ISR_NFERR_DETECTED 0x4000000
-#define ISR_CERR_DETECTED 0x8000000
-#define ISR_PHY_LINKDOWN 0x10000000
-#define ISR_DIS_SMB 0x20000000
-#define ISR_DIS_DMA 0x40000000
-#define ISR_DIS_INT 0x80000000
-
-/* Interrupt Mask Register */
-#define REG_IMR 0x1604
-
-/* Normal Interrupt mask */
-#define IMR_NORMAL_MASK (\
- ISR_SMB |\
- ISR_GPHY |\
- ISR_PHY_LINKDOWN|\
- ISR_DMAR_TO_RST |\
- ISR_DMAW_TO_RST |\
- ISR_CMB_TX |\
- ISR_CMB_RX )
-
-/* Debug Interrupt Mask (enable all interrupt) */
-#define IMR_DEBUG_MASK (\
- ISR_SMB |\
- ISR_TIMER |\
- ISR_MANUAL |\
- ISR_RXF_OV |\
- ISR_RFD_UNRUN |\
- ISR_RRD_OV |\
- ISR_TXF_UNRUN |\
- ISR_LINK |\
- ISR_CMB_TX |\
- ISR_CMB_RX |\
- ISR_RX_PKT |\
- ISR_TX_PKT |\
- ISR_MAC_RX |\
- ISR_MAC_TX )
-
-/* Interrupt Status Register */
-#define REG_RFD_RRD_IDX 0x1800
-#define REG_TPD_IDX 0x1804
-
-/* MII definition */
-/* PHY Common Register */
-#define MII_AT001_CR 0x09
-#define MII_AT001_SR 0x0A
-#define MII_AT001_ESR 0x0F
-#define MII_AT001_PSCR 0x10
-#define MII_AT001_PSSR 0x11
-
-/* PHY Control Register */
-#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
-#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
-#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
-#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
-#define MII_CR_POWER_DOWN 0x0800 /* Power down */
-#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
-#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
-#define MII_CR_SPEED_MASK 0x2040
-#define MII_CR_SPEED_1000 0x0040
-#define MII_CR_SPEED_100 0x2000
-#define MII_CR_SPEED_10 0x0000
-
-/* PHY Status Register */
-#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
-#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
-#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
-#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
-#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
-#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
-#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
-#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
-#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
-#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
-#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
-#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
-#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
-#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
-#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
-
-/* Link partner ability register. */
-#define MII_LPA_SLCT 0x001f /* Same as advertise selector */
-#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
-#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
-#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
-#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
-#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */
-#define MII_LPA_PAUSE 0x0400 /* PAUSE */
-#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */
-#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */
-#define MII_LPA_LPACK 0x4000 /* Link partner acked us */
-#define MII_LPA_NPAGE 0x8000 /* Next page bit */
-
-/* Autoneg Advertisement Register */
-#define MII_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
-#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
-#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
-#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
-#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
-#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
-#define MII_AR_PAUSE 0x0400 /* Pause operation desired */
-#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
-#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
-#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
-#define MII_AR_SPEED_MASK 0x01E0
-#define MII_AR_DEFAULT_CAP_MASK 0x0DE0
-
-/* 1000BASE-T Control Register */
-#define MII_AT001_CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
-#define MII_AT001_CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
-#define MII_AT001_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port, 0=DTE device */
-#define MII_AT001_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master, 0=Configure PHY as Slave */
-#define MII_AT001_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value, 0=Automatic Master/Slave config */
-#define MII_AT001_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
-#define MII_AT001_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
-#define MII_AT001_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
-#define MII_AT001_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
-#define MII_AT001_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
-#define MII_AT001_CR_1000T_SPEED_MASK 0x0300
-#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK 0x0300
-
-/* 1000BASE-T Status Register */
-#define MII_AT001_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
-#define MII_AT001_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
-#define MII_AT001_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
-#define MII_AT001_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
-#define MII_AT001_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
-#define MII_AT001_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
-#define MII_AT001_SR_1000T_REMOTE_RX_STATUS_SHIFT 12
-#define MII_AT001_SR_1000T_LOCAL_RX_STATUS_SHIFT 13
-
-/* Extended Status Register */
-#define MII_AT001_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
-#define MII_AT001_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
-#define MII_AT001_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
-#define MII_AT001_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
-
-/* AT001 PHY Specific Control Register */
-#define MII_AT001_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
-#define MII_AT001_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
-#define MII_AT001_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
-#define MII_AT001_PSCR_MAC_POWERDOWN 0x0008
-#define MII_AT001_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, 0=CLK125 toggling */
-#define MII_AT001_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5, Manual MDI configuration */
-#define MII_AT001_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
-#define MII_AT001_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
-#define MII_AT001_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled all speeds. */
-#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE 0x0080 /* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T RX Threshold), 0=Normal 10BASE-T RX Threshold */
-#define MII_AT001_PSCR_MII_5BIT_ENABLE 0x0100 /* 1=5-Bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
-#define MII_AT001_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
-#define MII_AT001_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
-#define MII_AT001_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
-#define MII_AT001_PSCR_POLARITY_REVERSAL_SHIFT 1
-#define MII_AT001_PSCR_AUTO_X_MODE_SHIFT 5
-#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
-
-/* AT001 PHY Specific Status Register */
-#define MII_AT001_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
-#define MII_AT001_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
-#define MII_AT001_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
-#define MII_AT001_PSSR_10MBS 0x0000 /* 00=10Mbs */
-#define MII_AT001_PSSR_100MBS 0x4000 /* 01=100Mbs */
-#define MII_AT001_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
-
-/* PCI Command Register Bit Definitions */
-#define PCI_REG_COMMAND 0x04 /* PCI Command Register */
-#define CMD_IO_SPACE 0x0001
-#define CMD_MEMORY_SPACE 0x0002
-#define CMD_BUS_MASTER 0x0004
-
-/* Wake Up Filter Control */
-#define ATL1_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
-#define ATL1_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
-#define ATL1_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
-#define ATL1_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */
-#define ATL1_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
-
-/* Error Codes */
-#define ATL1_SUCCESS 0
-#define ATL1_ERR_EEPROM 1
-#define ATL1_ERR_PHY 2
-#define ATL1_ERR_CONFIG 3
-#define ATL1_ERR_PARAM 4
-#define ATL1_ERR_MAC_TYPE 5
-#define ATL1_ERR_PHY_TYPE 6
-#define ATL1_ERR_PHY_SPEED 7
-#define ATL1_ERR_PHY_RES 8
-
-#define SPEED_0 0xffff
-#define SPEED_10 10
-#define SPEED_100 100
-#define SPEED_1000 1000
-#define HALF_DUPLEX 1
-#define FULL_DUPLEX 2
-
-#define MEDIA_TYPE_AUTO_SENSOR 0
-#define MEDIA_TYPE_1000M_FULL 1
-#define MEDIA_TYPE_100M_FULL 2
-#define MEDIA_TYPE_100M_HALF 3
-#define MEDIA_TYPE_10M_FULL 4
-#define MEDIA_TYPE_10M_HALF 5
-
-#define ADVERTISE_10_HALF 0x0001
-#define ADVERTISE_10_FULL 0x0002
-#define ADVERTISE_100_HALF 0x0004
-#define ADVERTISE_100_FULL 0x0008
-#define ADVERTISE_1000_HALF 0x0010
-#define ADVERTISE_1000_FULL 0x0020
-#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
-#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
-#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
-
-#define MAX_JUMBO_FRAME_SIZE 0x2800
-
-#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
-#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
-
-/* For checksumming , the sum of all words in the EEPROM should equal 0xBABA */
-#define EEPROM_SUM 0xBABA
-
-#define ATL1_EEDUMP_LEN 48
-
-/* Statistics counters collected by the MAC */
-struct stats_msg_block {
- /* rx */
- u32 rx_ok; /* The number of good packet received. */
- u32 rx_bcast; /* The number of good broadcast packet received. */
- u32 rx_mcast; /* The number of good multicast packet received. */
- u32 rx_pause; /* The number of Pause packet received. */
- u32 rx_ctrl; /* The number of Control packet received other than Pause frame. */
- u32 rx_fcs_err; /* The number of packets with bad FCS. */
- u32 rx_len_err; /* The number of packets with mismatch of length field and actual size. */
- u32 rx_byte_cnt; /* The number of bytes of good packet received. FCS is NOT included. */
- u32 rx_runt; /* The number of packets received that are less than 64 byte long and with good FCS. */
- u32 rx_frag; /* The number of packets received that are less than 64 byte long and with bad FCS. */
- u32 rx_sz_64; /* The number of good and bad packets received that are 64 byte long. */
- u32 rx_sz_65_127; /* The number of good and bad packets received that are between 65 and 127-byte long. */
- u32 rx_sz_128_255; /* The number of good and bad packets received that are between 128 and 255-byte long. */
- u32 rx_sz_256_511; /* The number of good and bad packets received that are between 256 and 511-byte long. */
- u32 rx_sz_512_1023; /* The number of good and bad packets received that are between 512 and 1023-byte long. */
- u32 rx_sz_1024_1518; /* The number of good and bad packets received that are between 1024 and 1518-byte long. */
- u32 rx_sz_1519_max; /* The number of good and bad packets received that are between 1519-byte and MTU. */
- u32 rx_sz_ov; /* The number of good and bad packets received that are more than MTU size šC truncated by Selene. */
- u32 rx_rxf_ov; /* The number of frame dropped due to occurrence of RX FIFO overflow. */
- u32 rx_rrd_ov; /* The number of frame dropped due to occurrence of RRD overflow. */
- u32 rx_align_err; /* Alignment Error */
- u32 rx_bcast_byte_cnt; /* The byte count of broadcast packet received, excluding FCS. */
- u32 rx_mcast_byte_cnt; /* The byte count of multicast packet received, excluding FCS. */
- u32 rx_err_addr; /* The number of packets dropped due to address filtering. */
-
- /* tx */
- u32 tx_ok; /* The number of good packet transmitted. */
- u32 tx_bcast; /* The number of good broadcast packet transmitted. */
- u32 tx_mcast; /* The number of good multicast packet transmitted. */
- u32 tx_pause; /* The number of Pause packet transmitted. */
- u32 tx_exc_defer; /* The number of packets transmitted with excessive deferral. */
- u32 tx_ctrl; /* The number of packets transmitted is a control frame, excluding Pause frame. */
- u32 tx_defer; /* The number of packets transmitted that is deferred. */
- u32 tx_byte_cnt; /* The number of bytes of data transmitted. FCS is NOT included. */
- u32 tx_sz_64; /* The number of good and bad packets transmitted that are 64 byte long. */
- u32 tx_sz_65_127; /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */
- u32 tx_sz_128_255; /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */
- u32 tx_sz_256_511; /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */
- u32 tx_sz_512_1023; /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */
- u32 tx_sz_1024_1518; /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */
- u32 tx_sz_1519_max; /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */
- u32 tx_1_col; /* The number of packets subsequently transmitted successfully with a single prior collision. */
- u32 tx_2_col; /* The number of packets subsequently transmitted successfully with multiple prior collisions. */
- u32 tx_late_col; /* The number of packets transmitted with late collisions. */
- u32 tx_abort_col; /* The number of transmit packets aborted due to excessive collisions. */
- u32 tx_underrun; /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */
- u32 tx_rd_eop; /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */
- u32 tx_len_err; /* The number of transmit packets with length field does NOT match the actual frame size. */
- u32 tx_trunc; /* The number of transmit packets truncated due to size exceeding MTU. */
- u32 tx_bcast_byte; /* The byte count of broadcast packet transmitted, excluding FCS. */
- u32 tx_mcast_byte; /* The byte count of multicast packet transmitted, excluding FCS. */
- u32 smb_updated; /* 1: SMB Updated. This is used by software as the indication of the statistics update.
- * Software should clear this bit as soon as retrieving the statistics information. */
-};
-
-/* Coalescing Message Block */
-struct coals_msg_block {
- u32 int_stats; /* interrupt status */
- u16 rrd_prod_idx; /* TRD Producer Index. */
- u16 rfd_cons_idx; /* RFD Consumer Index. */
- u16 update; /* Selene sets this bit every time it DMA the CMB to host memory.
- * Software supposes to clear this bit when CMB information is processed. */
- u16 tpd_cons_idx; /* TPD Consumer Index. */
-};
-
-/* RRD descriptor */
-struct rx_return_desc {
- u8 num_buf; /* Number of RFD buffers used by the received packet */
- u8 resved;
- u16 buf_indx; /* RFD Index of the first buffer */
- union {
- u32 valid;
- struct {
- u16 rx_chksum;
- u16 pkt_size;
- } xsum_sz;
- } xsz;
-
- u16 pkt_flg; /* Packet flags */
- u16 err_flg; /* Error flags */
- u16 resved2;
- u16 vlan_tag; /* VLAN TAG */
-};
-
-#define PACKET_FLAG_ETH_TYPE 0x0080
-#define PACKET_FLAG_VLAN_INS 0x0100
-#define PACKET_FLAG_ERR 0x0200
-#define PACKET_FLAG_IPV4 0x0400
-#define PACKET_FLAG_UDP 0x0800
-#define PACKET_FLAG_TCP 0x1000
-#define PACKET_FLAG_BCAST 0x2000
-#define PACKET_FLAG_MCAST 0x4000
-#define PACKET_FLAG_PAUSE 0x8000
-
-#define ERR_FLAG_CRC 0x0001
-#define ERR_FLAG_CODE 0x0002
-#define ERR_FLAG_DRIBBLE 0x0004
-#define ERR_FLAG_RUNT 0x0008
-#define ERR_FLAG_OV 0x0010
-#define ERR_FLAG_TRUNC 0x0020
-#define ERR_FLAG_IP_CHKSUM 0x0040
-#define ERR_FLAG_L4_CHKSUM 0x0080
-#define ERR_FLAG_LEN 0x0100
-#define ERR_FLAG_DES_ADDR 0x0200
-
-/* RFD descriptor */
-struct rx_free_desc {
- __le64 buffer_addr; /* Address of the descriptor's data buffer */
- __le16 buf_len; /* Size of the receive buffer in host memory, in byte */
- u16 coalese; /* Update consumer index to host after the reception of this frame */
- /* __attribute__ ((packed)) is required */
-} __attribute__ ((packed));
-
-/* tsopu defines */
-#define TSO_PARAM_BUFLEN_MASK 0x3FFF
-#define TSO_PARAM_BUFLEN_SHIFT 0
-#define TSO_PARAM_DMAINT_MASK 0x0001
-#define TSO_PARAM_DMAINT_SHIFT 14
-#define TSO_PARAM_PKTNT_MASK 0x0001
-#define TSO_PARAM_PKTINT_SHIFT 15
-#define TSO_PARAM_VLANTAG_MASK 0xFFFF
-#define TSO_PARAM_VLAN_SHIFT 16
-
-/* tsopl defines */
-#define TSO_PARAM_EOP_MASK 0x0001
-#define TSO_PARAM_EOP_SHIFT 0
-#define TSO_PARAM_COALESCE_MASK 0x0001
-#define TSO_PARAM_COALESCE_SHIFT 1
-#define TSO_PARAM_INSVLAG_MASK 0x0001
-#define TSO_PARAM_INSVLAG_SHIFT 2
-#define TSO_PARAM_CUSTOMCKSUM_MASK 0x0001
-#define TSO_PARAM_CUSTOMCKSUM_SHIFT 3
-#define TSO_PARAM_SEGMENT_MASK 0x0001
-#define TSO_PARAM_SEGMENT_SHIFT 4
-#define TSO_PARAM_IPCKSUM_MASK 0x0001
-#define TSO_PARAM_IPCKSUM_SHIFT 5
-#define TSO_PARAM_TCPCKSUM_MASK 0x0001
-#define TSO_PARAM_TCPCKSUM_SHIFT 6
-#define TSO_PARAM_UDPCKSUM_MASK 0x0001
-#define TSO_PARAM_UDPCKSUM_SHIFT 7
-#define TSO_PARAM_VLANTAGGED_MASK 0x0001
-#define TSO_PARAM_VLANTAGGED_SHIFT 8
-#define TSO_PARAM_ETHTYPE_MASK 0x0001
-#define TSO_PARAM_ETHTYPE_SHIFT 9
-#define TSO_PARAM_IPHL_MASK 0x000F
-#define TSO_PARAM_IPHL_SHIFT 10
-#define TSO_PARAM_TCPHDRLEN_MASK 0x000F
-#define TSO_PARAM_TCPHDRLEN_SHIFT 14
-#define TSO_PARAM_HDRFLAG_MASK 0x0001
-#define TSO_PARAM_HDRFLAG_SHIFT 18
-#define TSO_PARAM_MSS_MASK 0x1FFF
-#define TSO_PARAM_MSS_SHIFT 19
-
-/* csumpu defines */
-#define CSUM_PARAM_BUFLEN_MASK 0x3FFF
-#define CSUM_PARAM_BUFLEN_SHIFT 0
-#define CSUM_PARAM_DMAINT_MASK 0x0001
-#define CSUM_PARAM_DMAINT_SHIFT 14
-#define CSUM_PARAM_PKTINT_MASK 0x0001
-#define CSUM_PARAM_PKTINT_SHIFT 15
-#define CSUM_PARAM_VALANTAG_MASK 0xFFFF
-#define CSUM_PARAM_VALAN_SHIFT 16
-
-/* csumpl defines*/
-#define CSUM_PARAM_EOP_MASK 0x0001
-#define CSUM_PARAM_EOP_SHIFT 0
-#define CSUM_PARAM_COALESCE_MASK 0x0001
-#define CSUM_PARAM_COALESCE_SHIFT 1
-#define CSUM_PARAM_INSVLAG_MASK 0x0001
-#define CSUM_PARAM_INSVLAG_SHIFT 2
-#define CSUM_PARAM_CUSTOMCKSUM_MASK 0x0001
-#define CSUM_PARAM_CUSTOMCKSUM_SHIFT 3
-#define CSUM_PARAM_SEGMENT_MASK 0x0001
-#define CSUM_PARAM_SEGMENT_SHIFT 4
-#define CSUM_PARAM_IPCKSUM_MASK 0x0001
-#define CSUM_PARAM_IPCKSUM_SHIFT 5
-#define CSUM_PARAM_TCPCKSUM_MASK 0x0001
-#define CSUM_PARAM_TCPCKSUM_SHIFT 6
-#define CSUM_PARAM_UDPCKSUM_MASK 0x0001
-#define CSUM_PARAM_UDPCKSUM_SHIFT 7
-#define CSUM_PARAM_VLANTAGGED_MASK 0x0001
-#define CSUM_PARAM_VLANTAGGED_SHIFT 8
-#define CSUM_PARAM_ETHTYPE_MASK 0x0001
-#define CSUM_PARAM_ETHTYPE_SHIFT 9
-#define CSUM_PARAM_IPHL_MASK 0x000F
-#define CSUM_PARAM_IPHL_SHIFT 10
-#define CSUM_PARAM_PLOADOFFSET_MASK 0x00FF
-#define CSUM_PARAM_PLOADOFFSET_SHIFT 16
-#define CSUM_PARAM_XSUMOFFSET_MASK 0x00FF
-#define CSUM_PARAM_XSUMOFFSET_SHIFT 24
-
-/* TPD descriptor */
-struct tso_param {
- /* The order of these declarations is important -- don't change it */
- u32 tsopu; /* tso_param upper word */
- u32 tsopl; /* tso_param lower word */
-};
-
-struct csum_param {
- /* The order of these declarations is important -- don't change it */
- u32 csumpu; /* csum_param upper word */
- u32 csumpl; /* csum_param lower word */
-};
-
-union tpd_descr {
- u64 data;
- struct csum_param csum;
- struct tso_param tso;
-};
-
-struct tx_packet_desc {
- __le64 buffer_addr;
- union tpd_descr desc;
-};
-
-/* DMA Order Settings */
-enum atl1_dma_order {
- atl1_dma_ord_in = 1,
- atl1_dma_ord_enh = 2,
- atl1_dma_ord_out = 4
-};
-
-enum atl1_dma_rcb {
- atl1_rcb_64 = 0,
- atl1_rcb_128 = 1
-};
-
-enum atl1_dma_req_block {
- atl1_dma_req_128 = 0,
- atl1_dma_req_256 = 1,
- atl1_dma_req_512 = 2,
- atl1_dma_req_1024 = 3,
- atl1_dma_req_2048 = 4,
- atl1_dma_req_4096 = 5
-};
-
-struct atl1_spi_flash_dev {
- const char *manu_name; /* manufacturer id */
- /* op-code */
- u8 cmd_wrsr;
- u8 cmd_read;
- u8 cmd_program;
- u8 cmd_wren;
- u8 cmd_wrdi;
- u8 cmd_rdsr;
- u8 cmd_rdid;
- u8 cmd_sector_erase;
- u8 cmd_chip_erase;
-};
-
-#endif /* _ATL1_HW_H_ */
diff --git a/drivers/net/atlx/atl1_param.c b/drivers/net/atlx/atl1_param.c
deleted file mode 100644
index 4246bb9bd50e..000000000000
--- a/drivers/net/atlx/atl1_param.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
- * Copyright(c) 2006 Chris Snook <csnook@redhat.com>
- * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
- *
- * Derived from Intel e1000 driver
- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/types.h>
-#include <linux/moduleparam.h>
-#include <linux/pci.h>
-#include "atl1.h"
-
-/*
- * This is the only thing that needs to be changed to adjust the
- * maximum number of ports that the driver can manage.
- */
-#define ATL1_MAX_NIC 4
-
-#define OPTION_UNSET -1
-#define OPTION_DISABLED 0
-#define OPTION_ENABLED 1
-
-#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
-
-/*
- * Interrupt Moderate Timer in units of 2 us
- *
- * Valid Range: 10-65535
- *
- * Default Value: 100 (200us)
- */
-static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
-static int num_int_mod_timer = 0;
-module_param_array_named(int_mod_timer, int_mod_timer, int, &num_int_mod_timer, 0);
-MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
-
-/*
- * flash_vendor
- *
- * Valid Range: 0-2
- *
- * 0 - Atmel
- * 1 - SST
- * 2 - ST
- *
- * Default Value: 0
- */
-static int __devinitdata flash_vendor[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
-static int num_flash_vendor = 0;
-module_param_array_named(flash_vendor, flash_vendor, int, &num_flash_vendor, 0);
-MODULE_PARM_DESC(flash_vendor, "SPI flash vendor");
-
-#define DEFAULT_INT_MOD_CNT 100 /* 200us */
-#define MAX_INT_MOD_CNT 65000
-#define MIN_INT_MOD_CNT 50
-
-#define FLASH_VENDOR_DEFAULT 0
-#define FLASH_VENDOR_MIN 0
-#define FLASH_VENDOR_MAX 2
-
-struct atl1_option {
- enum { enable_option, range_option, list_option } type;
- char *name;
- char *err;
- int def;
- union {
- struct { /* range_option info */
- int min;
- int max;
- } r;
- struct { /* list_option info */
- int nr;
- struct atl1_opt_list {
- int i;
- char *str;
- } *p;
- } l;
- } arg;
-};
-
-static int __devinit atl1_validate_option(int *value, struct atl1_option *opt, struct pci_dev *pdev)
-{
- if (*value == OPTION_UNSET) {
- *value = opt->def;
- return 0;
- }
-
- switch (opt->type) {
- case enable_option:
- switch (*value) {
- case OPTION_ENABLED:
- dev_info(&pdev->dev, "%s enabled\n", opt->name);
- return 0;
- case OPTION_DISABLED:
- dev_info(&pdev->dev, "%s disabled\n", opt->name);
- return 0;
- }
- break;
- case range_option:
- if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- dev_info(&pdev->dev, "%s set to %i\n", opt->name,
- *value);
- return 0;
- }
- break;
- case list_option:{
- int i;
- struct atl1_opt_list *ent;
-
- for (i = 0; i < opt->arg.l.nr; i++) {
- ent = &opt->arg.l.p[i];
- if (*value == ent->i) {
- if (ent->str[0] != '\0')
- dev_info(&pdev->dev, "%s\n",
- ent->str);
- return 0;
- }
- }
- }
- break;
-
- default:
- break;
- }
-
- dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
- opt->name, *value, opt->err);
- *value = opt->def;
- return -1;
-}
-
-/*
- * atl1_check_options - Range Checking for Command Line Parameters
- * @adapter: board private structure
- *
- * This routine checks all command line parameters for valid user
- * input. If an invalid value is given, or if no user specified
- * value exists, a default value is used. The final value is stored
- * in a variable in the adapter structure.
- */
-void __devinit atl1_check_options(struct atl1_adapter *adapter)
-{
- struct pci_dev *pdev = adapter->pdev;
- int bd = adapter->bd_number;
- if (bd >= ATL1_MAX_NIC) {
- dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
- dev_notice(&pdev->dev, "using defaults for all values\n");
- }
- { /* Interrupt Moderate Timer */
- struct atl1_option opt = {
- .type = range_option,
- .name = "Interrupt Moderator Timer",
- .err = "using default of "
- __MODULE_STRING(DEFAULT_INT_MOD_CNT),
- .def = DEFAULT_INT_MOD_CNT,
- .arg = {.r =
- {.min = MIN_INT_MOD_CNT,.max = MAX_INT_MOD_CNT}}
- };
- int val;
- if (num_int_mod_timer > bd) {
- val = int_mod_timer[bd];
- atl1_validate_option(&val, &opt, pdev);
- adapter->imt = (u16) val;
- } else
- adapter->imt = (u16) (opt.def);
- }
-
- { /* Flash Vendor */
- struct atl1_option opt = {
- .type = range_option,
- .name = "SPI Flash Vendor",
- .err = "using default of "
- __MODULE_STRING(FLASH_VENDOR_DEFAULT),
- .def = DEFAULT_INT_MOD_CNT,
- .arg = {.r =
- {.min = FLASH_VENDOR_MIN,.max =
- FLASH_VENDOR_MAX}}
- };
- int val;
- if (num_flash_vendor > bd) {
- val = flash_vendor[bd];
- atl1_validate_option(&val, &opt, pdev);
- adapter->hw.flash_vendor = (u8) val;
- } else
- adapter->hw.flash_vendor = (u8) (opt.def);
- }
-}
diff --git a/drivers/net/atlx/atlx.c b/drivers/net/atlx/atlx.c
new file mode 100644
index 000000000000..4186326d1b94
--- /dev/null
+++ b/drivers/net/atlx/atlx.c
@@ -0,0 +1,433 @@
+/* atlx.c -- common functions for Attansic network drivers
+ *
+ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+ * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
+ * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* Including this file like a header is a temporary hack, I promise. -- CHS */
+#ifndef ATLX_C
+#define ATLX_C
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/etherdevice.h>
+#include <linux/if.h>
+#include <linux/netdevice.h>
+#include <linux/socket.h>
+#include <linux/sockios.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include "atlx.h"
+
+static struct atlx_spi_flash_dev flash_table[] = {
+/* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SEC_ERS CHIP_ERS */
+ {"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62},
+ {"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60},
+ {"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7},
+};
+
+static int atlx_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return atlx_mii_ioctl(netdev, ifr, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/*
+ * atlx_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ */
+static int atlx_set_mac(struct net_device *netdev, void *p)
+{
+ struct atlx_adapter *adapter = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (netif_running(netdev))
+ return -EBUSY;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
+
+ atlx_set_mac_addr(&adapter->hw);
+ return 0;
+}
+
+static void atlx_check_for_link(struct atlx_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ u16 phy_data = 0;
+
+ spin_lock(&adapter->lock);
+ adapter->phy_timer_pending = false;
+ atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
+ atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
+ spin_unlock(&adapter->lock);
+
+ /* notify upper layer link down ASAP */
+ if (!(phy_data & BMSR_LSTATUS)) {
+ /* Link Down */
+ if (netif_carrier_ok(netdev)) {
+ /* old link state: Up */
+ dev_info(&adapter->pdev->dev, "%s link is down\n",
+ netdev->name);
+ adapter->link_speed = SPEED_0;
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+ }
+ }
+ schedule_work(&adapter->link_chg_task);
+}
+
+/*
+ * atlx_set_multi - Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_multi entry point is called whenever the multicast address
+ * list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper multicast,
+ * promiscuous mode, and all-multi behavior.
+ */
+static void atlx_set_multi(struct net_device *netdev)
+{
+ struct atlx_adapter *adapter = netdev_priv(netdev);
+ struct atlx_hw *hw = &adapter->hw;
+ struct dev_mc_list *mc_ptr;
+ u32 rctl;
+ u32 hash_value;
+
+ /* Check for Promiscuous and All Multicast modes */
+ rctl = ioread32(hw->hw_addr + REG_MAC_CTRL);
+ if (netdev->flags & IFF_PROMISC)
+ rctl |= MAC_CTRL_PROMIS_EN;
+ else if (netdev->flags & IFF_ALLMULTI) {
+ rctl |= MAC_CTRL_MC_ALL_EN;
+ rctl &= ~MAC_CTRL_PROMIS_EN;
+ } else
+ rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
+
+ iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL);
+
+ /* clear the old settings from the multicast hash table */
+ iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
+ iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
+
+ /* compute mc addresses' hash value ,and put it into hash table */
+ for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+ hash_value = atlx_hash_mc_addr(hw, mc_ptr->dmi_addr);
+ atlx_hash_set(hw, hash_value);
+ }
+}
+
+/*
+ * atlx_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ */
+static void atlx_irq_enable(struct atlx_adapter *adapter)
+{
+ iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR);
+ ioread32(adapter->hw.hw_addr + REG_IMR);
+}
+
+/*
+ * atlx_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ */
+static void atlx_irq_disable(struct atlx_adapter *adapter)
+{
+ iowrite32(0, adapter->hw.hw_addr + REG_IMR);
+ ioread32(adapter->hw.hw_addr + REG_IMR);
+ synchronize_irq(adapter->pdev->irq);
+}
+
+static void atlx_clear_phy_int(struct atlx_adapter *adapter)
+{
+ u16 phy_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&adapter->lock, flags);
+ atlx_read_phy_reg(&adapter->hw, 19, &phy_data);
+ spin_unlock_irqrestore(&adapter->lock, flags);
+}
+
+/*
+ * atlx_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ */
+static struct net_device_stats *atlx_get_stats(struct net_device *netdev)
+{
+ struct atlx_adapter *adapter = netdev_priv(netdev);
+ return &adapter->net_stats;
+}
+
+/*
+ * atlx_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ */
+static void atlx_tx_timeout(struct net_device *netdev)
+{
+ struct atlx_adapter *adapter = netdev_priv(netdev);
+ /* Do the reset outside of interrupt context */
+ schedule_work(&adapter->tx_timeout_task);
+}
+
+/*
+ * atlx_link_chg_task - deal with link change event Out of interrupt context
+ */
+static void atlx_link_chg_task(struct work_struct *work)
+{
+ struct atlx_adapter *adapter;
+ unsigned long flags;
+
+ adapter = container_of(work, struct atlx_adapter, link_chg_task);
+
+ spin_lock_irqsave(&adapter->lock, flags);
+ atlx_check_link(adapter);
+ spin_unlock_irqrestore(&adapter->lock, flags);
+}
+
+static void atlx_vlan_rx_register(struct net_device *netdev,
+ struct vlan_group *grp)
+{
+ struct atlx_adapter *adapter = netdev_priv(netdev);
+ unsigned long flags;
+ u32 ctrl;
+
+ spin_lock_irqsave(&adapter->lock, flags);
+ /* atlx_irq_disable(adapter); FIXME: confirm/remove */
+ adapter->vlgrp = grp;
+
+ if (grp) {
+ /* enable VLAN tag insert/strip */
+ ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL);
+ ctrl |= MAC_CTRL_RMV_VLAN;
+ iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL);
+ } else {
+ /* disable VLAN tag insert/strip */
+ ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL);
+ ctrl &= ~MAC_CTRL_RMV_VLAN;
+ iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL);
+ }
+
+ /* atlx_irq_enable(adapter); FIXME */
+ spin_unlock_irqrestore(&adapter->lock, flags);
+}
+
+static void atlx_restore_vlan(struct atlx_adapter *adapter)
+{
+ atlx_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+}
+
+/*
+ * This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+#define ATL1_MAX_NIC 4
+
+#define OPTION_UNSET -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED 1
+
+#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
+
+/*
+ * Interrupt Moderate Timer in units of 2 us
+ *
+ * Valid Range: 10-65535
+ *
+ * Default Value: 100 (200us)
+ */
+static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
+static int num_int_mod_timer;
+module_param_array_named(int_mod_timer, int_mod_timer, int,
+ &num_int_mod_timer, 0);
+MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
+
+/*
+ * flash_vendor
+ *
+ * Valid Range: 0-2
+ *
+ * 0 - Atmel
+ * 1 - SST
+ * 2 - ST
+ *
+ * Default Value: 0
+ */
+static int __devinitdata flash_vendor[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
+static int num_flash_vendor;
+module_param_array_named(flash_vendor, flash_vendor, int, &num_flash_vendor, 0);
+MODULE_PARM_DESC(flash_vendor, "SPI flash vendor");
+
+#define DEFAULT_INT_MOD_CNT 100 /* 200us */
+#define MAX_INT_MOD_CNT 65000
+#define MIN_INT_MOD_CNT 50
+
+#define FLASH_VENDOR_DEFAULT 0
+#define FLASH_VENDOR_MIN 0
+#define FLASH_VENDOR_MAX 2
+
+struct atl1_option {
+ enum { enable_option, range_option, list_option } type;
+ char *name;
+ char *err;
+ int def;
+ union {
+ struct { /* range_option info */
+ int min;
+ int max;
+ } r;
+ struct { /* list_option info */
+ int nr;
+ struct atl1_opt_list {
+ int i;
+ char *str;
+ } *p;
+ } l;
+ } arg;
+};
+
+static int __devinit atl1_validate_option(int *value, struct atl1_option *opt,
+ struct pci_dev *pdev)
+{
+ if (*value == OPTION_UNSET) {
+ *value = opt->def;
+ return 0;
+ }
+
+ switch (opt->type) {
+ case enable_option:
+ switch (*value) {
+ case OPTION_ENABLED:
+ dev_info(&pdev->dev, "%s enabled\n", opt->name);
+ return 0;
+ case OPTION_DISABLED:
+ dev_info(&pdev->dev, "%s disabled\n", opt->name);
+ return 0;
+ }
+ break;
+ case range_option:
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ dev_info(&pdev->dev, "%s set to %i\n", opt->name,
+ *value);
+ return 0;
+ }
+ break;
+ case list_option:{
+ int i;
+ struct atl1_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ dev_info(&pdev->dev, "%s\n",
+ ent->str);
+ return 0;
+ }
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
+ opt->name, *value, opt->err);
+ *value = opt->def;
+ return -1;
+}
+
+/*
+ * atl1_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input. If an invalid value is given, or if no user specified
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ */
+void __devinit atl1_check_options(struct atl1_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int bd = adapter->bd_number;
+ if (bd >= ATL1_MAX_NIC) {
+ dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
+ dev_notice(&pdev->dev, "using defaults for all values\n");
+ }
+ { /* Interrupt Moderate Timer */
+ struct atl1_option opt = {
+ .type = range_option,
+ .name = "Interrupt Moderator Timer",
+ .err = "using default of "
+ __MODULE_STRING(DEFAULT_INT_MOD_CNT),
+ .def = DEFAULT_INT_MOD_CNT,
+ .arg = {.r = {.min = MIN_INT_MOD_CNT,
+ .max = MAX_INT_MOD_CNT} }
+ };
+ int val;
+ if (num_int_mod_timer > bd) {
+ val = int_mod_timer[bd];
+ atl1_validate_option(&val, &opt, pdev);
+ adapter->imt = (u16) val;
+ } else
+ adapter->imt = (u16) (opt.def);
+ }
+
+ { /* Flash Vendor */
+ struct atl1_option opt = {
+ .type = range_option,
+ .name = "SPI Flash Vendor",
+ .err = "using default of "
+ __MODULE_STRING(FLASH_VENDOR_DEFAULT),
+ .def = DEFAULT_INT_MOD_CNT,
+ .arg = {.r = {.min = FLASH_VENDOR_MIN,
+ .max = FLASH_VENDOR_MAX} }
+ };
+ int val;
+ if (num_flash_vendor > bd) {
+ val = flash_vendor[bd];
+ atl1_validate_option(&val, &opt, pdev);
+ adapter->hw.flash_vendor = (u8) val;
+ } else
+ adapter->hw.flash_vendor = (u8) (opt.def);
+ }
+}
+
+#endif /* ATLX_C */
diff --git a/drivers/net/atlx/atlx.h b/drivers/net/atlx/atlx.h
new file mode 100644
index 000000000000..3be7c09734d4
--- /dev/null
+++ b/drivers/net/atlx/atlx.h
@@ -0,0 +1,506 @@
+/* atlx_hw.h -- common hardware definitions for Attansic network drivers
+ *
+ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+ * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
+ * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef ATLX_H
+#define ATLX_H
+
+#include <linux/module.h>
+#include <linux/types.h>
+
+#define ATLX_DRIVER_VERSION "2.1.1"
+MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
+ Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(ATLX_DRIVER_VERSION);
+
+#define ATLX_ERR_PHY 2
+#define ATLX_ERR_PHY_SPEED 7
+#define ATLX_ERR_PHY_RES 8
+
+#define SPEED_0 0xffff
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+#define MEDIA_TYPE_AUTO_SENSOR 0
+
+/* register definitions */
+#define REG_PM_CTRLSTAT 0x44
+
+#define REG_PCIE_CAP_LIST 0x58
+
+#define REG_VPD_CAP 0x6C
+#define VPD_CAP_ID_MASK 0xFF
+#define VPD_CAP_ID_SHIFT 0
+#define VPD_CAP_NEXT_PTR_MASK 0xFF
+#define VPD_CAP_NEXT_PTR_SHIFT 8
+#define VPD_CAP_VPD_ADDR_MASK 0x7FFF
+#define VPD_CAP_VPD_ADDR_SHIFT 16
+#define VPD_CAP_VPD_FLAG 0x80000000
+
+#define REG_VPD_DATA 0x70
+
+#define REG_SPI_FLASH_CTRL 0x200
+#define SPI_FLASH_CTRL_STS_NON_RDY 0x1
+#define SPI_FLASH_CTRL_STS_WEN 0x2
+#define SPI_FLASH_CTRL_STS_WPEN 0x80
+#define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF
+#define SPI_FLASH_CTRL_DEV_STS_SHIFT 0
+#define SPI_FLASH_CTRL_INS_MASK 0x7
+#define SPI_FLASH_CTRL_INS_SHIFT 8
+#define SPI_FLASH_CTRL_START 0x800
+#define SPI_FLASH_CTRL_EN_VPD 0x2000
+#define SPI_FLASH_CTRL_LDSTART 0x8000
+#define SPI_FLASH_CTRL_CS_HI_MASK 0x3
+#define SPI_FLASH_CTRL_CS_HI_SHIFT 16
+#define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3
+#define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18
+#define SPI_FLASH_CTRL_CLK_LO_MASK 0x3
+#define SPI_FLASH_CTRL_CLK_LO_SHIFT 20
+#define SPI_FLASH_CTRL_CLK_HI_MASK 0x3
+#define SPI_FLASH_CTRL_CLK_HI_SHIFT 22
+#define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3
+#define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24
+#define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3
+#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26
+#define SPI_FLASH_CTRL_WAIT_READY 0x10000000
+
+#define REG_SPI_ADDR 0x204
+
+#define REG_SPI_DATA 0x208
+
+#define REG_SPI_FLASH_CONFIG 0x20C
+#define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF
+#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0
+#define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3
+#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24
+#define SPI_FLASH_CONFIG_LD_EXIST 0x4000000
+
+#define REG_SPI_FLASH_OP_PROGRAM 0x210
+#define REG_SPI_FLASH_OP_SC_ERASE 0x211
+#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212
+#define REG_SPI_FLASH_OP_RDID 0x213
+#define REG_SPI_FLASH_OP_WREN 0x214
+#define REG_SPI_FLASH_OP_RDSR 0x215
+#define REG_SPI_FLASH_OP_WRSR 0x216
+#define REG_SPI_FLASH_OP_READ 0x217
+
+#define REG_TWSI_CTRL 0x218
+#define TWSI_CTRL_LD_OFFSET_MASK 0xFF
+#define TWSI_CTRL_LD_OFFSET_SHIFT 0
+#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7
+#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8
+#define TWSI_CTRL_SW_LDSTART 0x800
+#define TWSI_CTRL_HW_LDSTART 0x1000
+#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F
+#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15
+#define TWSI_CTRL_LD_EXIST 0x400000
+#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3
+#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23
+#define TWSI_CTRL_FREQ_SEL_100K 0
+#define TWSI_CTRL_FREQ_SEL_200K 1
+#define TWSI_CTRL_FREQ_SEL_300K 2
+#define TWSI_CTRL_FREQ_SEL_400K 3
+#define TWSI_CTRL_SMB_SLV_ADDR /* FIXME: define or remove */
+#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3
+#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24
+
+#define REG_PCIE_DEV_MISC_CTRL 0x21C
+#define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2
+#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1
+#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4
+#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8
+#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10
+
+#define REG_PCIE_PHYMISC 0x1000
+#define PCIE_PHYMISC_FORCE_RCV_DET 0x4
+
+#define REG_PCIE_DLL_TX_CTRL1 0x1104
+#define PCIE_DLL_TX_CTRL1_SEL_NOR_CLK 0x400
+#define PCIE_DLL_TX_CTRL1_DEF 0x568
+
+#define REG_LTSSM_TEST_MODE 0x12FC
+#define LTSSM_TEST_MODE_DEF 0x6500
+
+/* Master Control Register */
+#define REG_MASTER_CTRL 0x1400
+#define MASTER_CTRL_SOFT_RST 0x1
+#define MASTER_CTRL_MTIMER_EN 0x2
+#define MASTER_CTRL_ITIMER_EN 0x4
+#define MASTER_CTRL_MANUAL_INT 0x8
+#define MASTER_CTRL_REV_NUM_SHIFT 16
+#define MASTER_CTRL_REV_NUM_MASK 0xFF
+#define MASTER_CTRL_DEV_ID_SHIFT 24
+#define MASTER_CTRL_DEV_ID_MASK 0xFF
+
+/* Timer Initial Value Register */
+#define REG_MANUAL_TIMER_INIT 0x1404
+
+/* IRQ Moderator Timer Initial Value Register */
+#define REG_IRQ_MODU_TIMER_INIT 0x1408
+
+#define REG_PHY_ENABLE 0x140C
+
+/* IRQ Anti-Lost Timer Initial Value Register */
+#define REG_CMBDISDMA_TIMER 0x140E
+
+/* Block IDLE Status Register */
+#define REG_IDLE_STATUS 0x1410
+
+/* MDIO Control Register */
+#define REG_MDIO_CTRL 0x1414
+#define MDIO_DATA_MASK 0xFFFF
+#define MDIO_DATA_SHIFT 0
+#define MDIO_REG_ADDR_MASK 0x1F
+#define MDIO_REG_ADDR_SHIFT 16
+#define MDIO_RW 0x200000
+#define MDIO_SUP_PREAMBLE 0x400000
+#define MDIO_START 0x800000
+#define MDIO_CLK_SEL_SHIFT 24
+#define MDIO_CLK_25_4 0
+#define MDIO_CLK_25_6 2
+#define MDIO_CLK_25_8 3
+#define MDIO_CLK_25_10 4
+#define MDIO_CLK_25_14 5
+#define MDIO_CLK_25_20 6
+#define MDIO_CLK_25_28 7
+#define MDIO_BUSY 0x8000000
+
+/* MII PHY Status Register */
+#define REG_PHY_STATUS 0x1418
+
+/* BIST Control and Status Register0 (for the Packet Memory) */
+#define REG_BIST0_CTRL 0x141C
+#define BIST0_NOW 0x1
+#define BIST0_SRAM_FAIL 0x2
+#define BIST0_FUSE_FLAG 0x4
+#define REG_BIST1_CTRL 0x1420
+#define BIST1_NOW 0x1
+#define BIST1_SRAM_FAIL 0x2
+#define BIST1_FUSE_FLAG 0x4
+
+/* SerDes Lock Detect Control and Status Register */
+#define REG_SERDES_LOCK 0x1424
+#define SERDES_LOCK_DETECT 1
+#define SERDES_LOCK_DETECT_EN 2
+
+/* MAC Control Register */
+#define REG_MAC_CTRL 0x1480
+#define MAC_CTRL_TX_EN 1
+#define MAC_CTRL_RX_EN 2
+#define MAC_CTRL_TX_FLOW 4
+#define MAC_CTRL_RX_FLOW 8
+#define MAC_CTRL_LOOPBACK 0x10
+#define MAC_CTRL_DUPLX 0x20
+#define MAC_CTRL_ADD_CRC 0x40
+#define MAC_CTRL_PAD 0x80
+#define MAC_CTRL_LENCHK 0x100
+#define MAC_CTRL_HUGE_EN 0x200
+#define MAC_CTRL_PRMLEN_SHIFT 10
+#define MAC_CTRL_PRMLEN_MASK 0xF
+#define MAC_CTRL_RMV_VLAN 0x4000
+#define MAC_CTRL_PROMIS_EN 0x8000
+#define MAC_CTRL_MC_ALL_EN 0x2000000
+#define MAC_CTRL_BC_EN 0x4000000
+
+/* MAC IPG/IFG Control Register */
+#define REG_MAC_IPG_IFG 0x1484
+#define MAC_IPG_IFG_IPGT_SHIFT 0
+#define MAC_IPG_IFG_IPGT_MASK 0x7F
+#define MAC_IPG_IFG_MIFG_SHIFT 8
+#define MAC_IPG_IFG_MIFG_MASK 0xFF
+#define MAC_IPG_IFG_IPGR1_SHIFT 16
+#define MAC_IPG_IFG_IPGR1_MASK 0x7F
+#define MAC_IPG_IFG_IPGR2_SHIFT 24
+#define MAC_IPG_IFG_IPGR2_MASK 0x7F
+
+/* MAC STATION ADDRESS */
+#define REG_MAC_STA_ADDR 0x1488
+
+/* Hash table for multicast address */
+#define REG_RX_HASH_TABLE 0x1490
+
+/* MAC Half-Duplex Control Register */
+#define REG_MAC_HALF_DUPLX_CTRL 0x1498
+#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0
+#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3FF
+#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12
+#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xF
+#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000
+#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000
+#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20
+#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xF
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xF
+
+/* Maximum Frame Length Control Register */
+#define REG_MTU 0x149C
+
+/* Wake-On-Lan control register */
+#define REG_WOL_CTRL 0x14A0
+#define WOL_PATTERN_EN 0x1
+#define WOL_PATTERN_PME_EN 0x2
+#define WOL_MAGIC_EN 0x4
+#define WOL_MAGIC_PME_EN 0x8
+#define WOL_LINK_CHG_EN 0x10
+#define WOL_LINK_CHG_PME_EN 0x20
+#define WOL_PATTERN_ST 0x100
+#define WOL_MAGIC_ST 0x200
+#define WOL_LINKCHG_ST 0x400
+#define WOL_PT0_EN 0x10000
+#define WOL_PT1_EN 0x20000
+#define WOL_PT2_EN 0x40000
+#define WOL_PT3_EN 0x80000
+#define WOL_PT4_EN 0x100000
+#define WOL_PT0_MATCH 0x1000000
+#define WOL_PT1_MATCH 0x2000000
+#define WOL_PT2_MATCH 0x4000000
+#define WOL_PT3_MATCH 0x8000000
+#define WOL_PT4_MATCH 0x10000000
+
+/* Internal SRAM Partition Register, high 32 bits */
+#define REG_SRAM_RFD_ADDR 0x1500
+
+/* Descriptor Control register, high 32 bits */
+#define REG_DESC_BASE_ADDR_HI 0x1540
+
+/* Interrupt Status Register */
+#define REG_ISR 0x1600
+#define ISR_UR_DETECTED 0x1000000
+#define ISR_FERR_DETECTED 0x2000000
+#define ISR_NFERR_DETECTED 0x4000000
+#define ISR_CERR_DETECTED 0x8000000
+#define ISR_PHY_LINKDOWN 0x10000000
+#define ISR_DIS_INT 0x80000000
+
+/* Interrupt Mask Register */
+#define REG_IMR 0x1604
+
+#define REG_RFD_RRD_IDX 0x1800
+#define REG_TPD_IDX 0x1804
+
+/* MII definitions */
+
+/* PHY Common Register */
+#define MII_ATLX_CR 0x09
+#define MII_ATLX_SR 0x0A
+#define MII_ATLX_ESR 0x0F
+#define MII_ATLX_PSCR 0x10
+#define MII_ATLX_PSSR 0x11
+
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100,
+ * 00=10
+ */
+#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100,
+ * 00=10
+ */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_MASK 0x2040
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS 0x0001 /* Ext register capabilities */
+#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext stat info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
+#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
+
+/* Link partner ability register */
+#define MII_LPA_SLCT 0x001f /* Same as advertise selector */
+#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
+#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
+#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
+#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
+#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */
+#define MII_LPA_PAUSE 0x0400 /* PAUSE */
+#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */
+#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */
+#define MII_LPA_LPACK 0x4000 /* Link partner acked us */
+#define MII_LPA_NPAGE 0x8000 /* Next page bit */
+
+/* Autoneg Advertisement Register */
+#define MII_AR_SELECTOR_FIELD 0x0001 /* IEEE 802.3 CSMA/CD */
+#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
+#define MII_AR_PAUSE 0x0400 /* Pause operation desired */
+#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Dir bit */
+#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
+#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability support */
+#define MII_AR_SPEED_MASK 0x01E0
+#define MII_AR_DEFAULT_CAP_MASK 0x0DE0
+
+/* 1000BASE-T Control Register */
+#define MII_ATLX_CR_1000T_HD_CAPS 0x0100 /* Adv 1000T HD cap */
+#define MII_ATLX_CR_1000T_FD_CAPS 0x0200 /* Adv 1000T FD cap */
+#define MII_ATLX_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device,
+ * 0=DTE device */
+#define MII_ATLX_CR_1000T_MS_VALUE 0x0800 /* 1=Config PHY as Master,
+ * 0=Configure PHY as Slave */
+#define MII_ATLX_CR_1000T_MS_ENABLE 0x1000 /* 1=Man Master/Slave config,
+ * 0=Auto Master/Slave config
+ */
+#define MII_ATLX_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define MII_ATLX_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+#define MII_ATLX_CR_1000T_TEST_MODE_2 0x4000 /* Master Xmit Jitter test */
+#define MII_ATLX_CR_1000T_TEST_MODE_3 0x6000 /* Slave Xmit Jitter test */
+#define MII_ATLX_CR_1000T_TEST_MODE_4 0x8000 /* Xmitter Distortion test */
+#define MII_ATLX_CR_1000T_SPEED_MASK 0x0300
+#define MII_ATLX_CR_1000T_DEFAULT_CAP_MASK 0x0300
+
+/* 1000BASE-T Status Register */
+#define MII_ATLX_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
+#define MII_ATLX_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
+#define MII_ATLX_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define MII_ATLX_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+#define MII_ATLX_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master
+ * 0=Slave
+ */
+#define MII_ATLX_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config
+ * fault */
+#define MII_ATLX_SR_1000T_REMOTE_RX_STATUS_SHIFT 12
+#define MII_ATLX_SR_1000T_LOCAL_RX_STATUS_SHIFT 13
+
+/* Extended Status Register */
+#define MII_ATLX_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
+#define MII_ATLX_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
+#define MII_ATLX_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
+#define MII_ATLX_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
+
+/* ATLX PHY Specific Control Register */
+#define MII_ATLX_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Func disabled */
+#define MII_ATLX_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enbld */
+#define MII_ATLX_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+#define MII_ATLX_PSCR_MAC_POWERDOWN 0x0008
+#define MII_ATLX_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low
+ * 0=CLK125 toggling
+ */
+#define MII_ATLX_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5,
+ * Manual MDI configuration
+ */
+#define MII_ATLX_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+#define MII_ATLX_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover
+ * 100BASE-TX/10BASE-T: MDI
+ * Mode */
+#define MII_ATLX_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
+ * all speeds.
+ */
+#define MII_ATLX_PSCR_10BT_EXT_DIST_ENABLE 0x0080 /* 1=Enable Extended
+ * 10BASE-T distance
+ * (Lower 10BASE-T RX
+ * Threshold)
+ * 0=Normal 10BASE-T RX
+ * Threshold
+ */
+#define MII_ATLX_PSCR_MII_5BIT_ENABLE 0x0100 /* 1=5-Bit interface in
+ * 100BASE-TX
+ * 0=MII interface in
+ * 100BASE-TX
+ */
+#define MII_ATLX_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler dsbl */
+#define MII_ATLX_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
+#define MII_ATLX_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+#define MII_ATLX_PSCR_POLARITY_REVERSAL_SHIFT 1
+#define MII_ATLX_PSCR_AUTO_X_MODE_SHIFT 5
+#define MII_ATLX_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
+
+/* ATLX PHY Specific Status Register */
+#define MII_ATLX_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define MII_ATLX_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define MII_ATLX_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define MII_ATLX_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define MII_ATLX_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define MII_ATLX_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+/* PCI Command Register Bit Definitions */
+#define PCI_REG_COMMAND 0x04 /* PCI Command Register */
+#define CMD_IO_SPACE 0x0001
+#define CMD_MEMORY_SPACE 0x0002
+#define CMD_BUS_MASTER 0x0004
+
+/* Wake Up Filter Control */
+#define ATLX_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define ATLX_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define ATLX_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define ATLX_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */
+#define ATLX_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010
+#define ADVERTISE_1000_FULL 0x0020
+#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
+#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
+
+#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
+
+/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA */
+#define EEPROM_SUM 0xBABA
+#define NODE_ADDRESS_SIZE 6
+
+struct atlx_spi_flash_dev {
+ const char *manu_name; /* manufacturer id */
+ /* op-code */
+ u8 cmd_wrsr;
+ u8 cmd_read;
+ u8 cmd_program;
+ u8 cmd_wren;
+ u8 cmd_wrdi;
+ u8 cmd_rdsr;
+ u8 cmd_rdid;
+ u8 cmd_sector_erase;
+ u8 cmd_chip_erase;
+};
+
+#endif /* ATLX_H */
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-17 18:17:53 +0000