diff options
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_init.h')
-rw-r--r-- | drivers/net/bnx2x/bnx2x_init.h | 327 |
1 files changed, 234 insertions, 93 deletions
diff --git a/drivers/net/bnx2x/bnx2x_init.h b/drivers/net/bnx2x/bnx2x_init.h index d5399206f66e..df9f196dd6e8 100644 --- a/drivers/net/bnx2x/bnx2x_init.h +++ b/drivers/net/bnx2x/bnx2x_init.h @@ -15,98 +15,34 @@ #ifndef BNX2X_INIT_H #define BNX2X_INIT_H -/* RAM0 size in bytes */ -#define STORM_INTMEM_SIZE_E1 0x5800 -#define STORM_INTMEM_SIZE_E1H 0x10000 -#define STORM_INTMEM_SIZE(bp) ((CHIP_IS_E1(bp) ? STORM_INTMEM_SIZE_E1 : \ - STORM_INTMEM_SIZE_E1H) / 4) - - /* Init operation types and structures */ -/* Common for both E1 and E1H */ -#define OP_RD 0x1 /* read single register */ -#define OP_WR 0x2 /* write single register */ -#define OP_IW 0x3 /* write single register using mailbox */ -#define OP_SW 0x4 /* copy a string to the device */ -#define OP_SI 0x5 /* copy a string using mailbox */ -#define OP_ZR 0x6 /* clear memory */ -#define OP_ZP 0x7 /* unzip then copy with DMAE */ -#define OP_WR_64 0x8 /* write 64 bit pattern */ -#define OP_WB 0x9 /* copy a string using DMAE */ - -/* FPGA and EMUL specific operations */ -#define OP_WR_EMUL 0xa /* write single register on Emulation */ -#define OP_WR_FPGA 0xb /* write single register on FPGA */ -#define OP_WR_ASIC 0xc /* write single register on ASIC */ - -/* Init stages */ -/* Never reorder stages !!! */ -#define COMMON_STAGE 0 -#define PORT0_STAGE 1 -#define PORT1_STAGE 2 -#define FUNC0_STAGE 3 -#define FUNC1_STAGE 4 -#define FUNC2_STAGE 5 -#define FUNC3_STAGE 6 -#define FUNC4_STAGE 7 -#define FUNC5_STAGE 8 -#define FUNC6_STAGE 9 -#define FUNC7_STAGE 10 -#define STAGE_IDX_MAX 11 - -#define STAGE_START 0 -#define STAGE_END 1 - - -/* Indices of blocks */ -#define PRS_BLOCK 0 -#define SRCH_BLOCK 1 -#define TSDM_BLOCK 2 -#define TCM_BLOCK 3 -#define BRB1_BLOCK 4 -#define TSEM_BLOCK 5 -#define PXPCS_BLOCK 6 -#define EMAC0_BLOCK 7 -#define EMAC1_BLOCK 8 -#define DBU_BLOCK 9 -#define MISC_BLOCK 10 -#define DBG_BLOCK 11 -#define NIG_BLOCK 12 -#define MCP_BLOCK 13 -#define UPB_BLOCK 14 -#define CSDM_BLOCK 15 -#define USDM_BLOCK 16 -#define CCM_BLOCK 17 -#define UCM_BLOCK 18 -#define USEM_BLOCK 19 -#define CSEM_BLOCK 20 -#define XPB_BLOCK 21 -#define DQ_BLOCK 22 -#define TIMERS_BLOCK 23 -#define XSDM_BLOCK 24 -#define QM_BLOCK 25 -#define PBF_BLOCK 26 -#define XCM_BLOCK 27 -#define XSEM_BLOCK 28 -#define CDU_BLOCK 29 -#define DMAE_BLOCK 30 -#define PXP_BLOCK 31 -#define CFC_BLOCK 32 -#define HC_BLOCK 33 -#define PXP2_BLOCK 34 -#define MISC_AEU_BLOCK 35 -#define PGLUE_B_BLOCK 36 -#define IGU_BLOCK 37 -#define ATC_BLOCK 38 -#define QM_4PORT_BLOCK 39 -#define XSEM_4PORT_BLOCK 40 +enum { + OP_RD = 0x1, /* read a single register */ + OP_WR, /* write a single register */ + OP_SW, /* copy a string to the device */ + OP_ZR, /* clear memory */ + OP_ZP, /* unzip then copy with DMAE */ + OP_WR_64, /* write 64 bit pattern */ + OP_WB, /* copy a string using DMAE */ + OP_WB_ZR, /* Clear a string using DMAE or indirect-wr */ + /* Skip the following ops if all of the init modes don't match */ + OP_IF_MODE_OR, + /* Skip the following ops if any of the init modes don't match */ + OP_IF_MODE_AND, + OP_MAX +}; +enum { + STAGE_START, + STAGE_END, +}; /* Returns the index of start or end of a specific block stage in ops array*/ #define BLOCK_OPS_IDX(block, stage, end) \ - (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end)) + (2*(((block)*NUM_OF_INIT_PHASES) + (stage)) + (end)) +/* structs for the various opcodes */ struct raw_op { u32 op:8; u32 offset:24; @@ -116,7 +52,7 @@ struct raw_op { struct op_read { u32 op:8; u32 offset:24; - u32 pad; + u32 val; }; struct op_write { @@ -125,15 +61,15 @@ struct op_write { u32 val; }; -struct op_string_write { +struct op_arr_write { u32 op:8; u32 offset:24; -#ifdef __LITTLE_ENDIAN - u16 data_off; - u16 data_len; -#else /* __BIG_ENDIAN */ +#ifdef __BIG_ENDIAN u16 data_len; u16 data_off; +#else /* __LITTLE_ENDIAN */ + u16 data_off; + u16 data_len; #endif }; @@ -143,14 +79,210 @@ struct op_zero { u32 len; }; +struct op_if_mode { + u32 op:8; + u32 cmd_offset:24; + u32 mode_bit_map; +}; + + union init_op { struct op_read read; struct op_write write; - struct op_string_write str_wr; + struct op_arr_write arr_wr; struct op_zero zero; struct raw_op raw; + struct op_if_mode if_mode; +}; + + +/* Init Phases */ +enum { + PHASE_COMMON, + PHASE_PORT0, + PHASE_PORT1, + PHASE_PF0, + PHASE_PF1, + PHASE_PF2, + PHASE_PF3, + PHASE_PF4, + PHASE_PF5, + PHASE_PF6, + PHASE_PF7, + NUM_OF_INIT_PHASES }; +/* Init Modes */ +enum { + MODE_ASIC = 0x00000001, + MODE_FPGA = 0x00000002, + MODE_EMUL = 0x00000004, + MODE_E2 = 0x00000008, + MODE_E3 = 0x00000010, + MODE_PORT2 = 0x00000020, + MODE_PORT4 = 0x00000040, + MODE_SF = 0x00000080, + MODE_MF = 0x00000100, + MODE_MF_SD = 0x00000200, + MODE_MF_SI = 0x00000400, + MODE_MF_NIV = 0x00000800, + MODE_E3_A0 = 0x00001000, + MODE_E3_B0 = 0x00002000, + MODE_COS_BC = 0x00004000, + MODE_COS3 = 0x00008000, + MODE_COS6 = 0x00010000, + MODE_LITTLE_ENDIAN = 0x00020000, + MODE_BIG_ENDIAN = 0x00040000, +}; + +/* Init Blocks */ +enum { + BLOCK_ATC, + BLOCK_BRB1, + BLOCK_CCM, + BLOCK_CDU, + BLOCK_CFC, + BLOCK_CSDM, + BLOCK_CSEM, + BLOCK_DBG, + BLOCK_DMAE, + BLOCK_DORQ, + BLOCK_HC, + BLOCK_IGU, + BLOCK_MISC, + BLOCK_NIG, + BLOCK_PBF, + BLOCK_PGLUE_B, + BLOCK_PRS, + BLOCK_PXP2, + BLOCK_PXP, + BLOCK_QM, + BLOCK_SRC, + BLOCK_TCM, + BLOCK_TM, + BLOCK_TSDM, + BLOCK_TSEM, + BLOCK_UCM, + BLOCK_UPB, + BLOCK_USDM, + BLOCK_USEM, + BLOCK_XCM, + BLOCK_XPB, + BLOCK_XSDM, + BLOCK_XSEM, + BLOCK_MISC_AEU, + NUM_OF_INIT_BLOCKS +}; + +/* QM queue numbers */ +#define BNX2X_ETH_Q 0 +#define BNX2X_TOE_Q 3 +#define BNX2X_TOE_ACK_Q 6 +#define BNX2X_ISCSI_Q 9 +#define BNX2X_ISCSI_ACK_Q 8 +#define BNX2X_FCOE_Q 10 + +/* Vnics per mode */ +#define BNX2X_PORT2_MODE_NUM_VNICS 4 +#define BNX2X_PORT4_MODE_NUM_VNICS 2 + +/* COS offset for port1 in E3 B0 4port mode */ +#define BNX2X_E3B0_PORT1_COS_OFFSET 3 + +/* QM Register addresses */ +#define BNX2X_Q_VOQ_REG_ADDR(pf_q_num)\ + (QM_REG_QVOQIDX_0 + 4 * (pf_q_num)) +#define BNX2X_VOQ_Q_REG_ADDR(cos, pf_q_num)\ + (QM_REG_VOQQMASK_0_LSB + 4 * ((cos) * 2 + ((pf_q_num) >> 5))) +#define BNX2X_Q_CMDQ_REG_ADDR(pf_q_num)\ + (QM_REG_BYTECRDCMDQ_0 + 4 * ((pf_q_num) >> 4)) + +/* extracts the QM queue number for the specified port and vnic */ +#define BNX2X_PF_Q_NUM(q_num, port, vnic)\ + ((((port) << 1) | (vnic)) * 16 + (q_num)) + + +/* Maps the specified queue to the specified COS */ +static inline void bnx2x_map_q_cos(struct bnx2x *bp, u32 q_num, u32 new_cos) +{ + /* find current COS mapping */ + u32 curr_cos = REG_RD(bp, QM_REG_QVOQIDX_0 + q_num * 4); + + /* check if queue->COS mapping has changed */ + if (curr_cos != new_cos) { + u32 num_vnics = BNX2X_PORT2_MODE_NUM_VNICS; + u32 reg_addr, reg_bit_map, vnic; + + /* update parameters for 4port mode */ + if (INIT_MODE_FLAGS(bp) & MODE_PORT4) { + num_vnics = BNX2X_PORT4_MODE_NUM_VNICS; + if (BP_PORT(bp)) { + curr_cos += BNX2X_E3B0_PORT1_COS_OFFSET; + new_cos += BNX2X_E3B0_PORT1_COS_OFFSET; + } + } + + /* change queue mapping for each VNIC */ + for (vnic = 0; vnic < num_vnics; vnic++) { + u32 pf_q_num = + BNX2X_PF_Q_NUM(q_num, BP_PORT(bp), vnic); + u32 q_bit_map = 1 << (pf_q_num & 0x1f); + + /* overwrite queue->VOQ mapping */ + REG_WR(bp, BNX2X_Q_VOQ_REG_ADDR(pf_q_num), new_cos); + + /* clear queue bit from current COS bit map */ + reg_addr = BNX2X_VOQ_Q_REG_ADDR(curr_cos, pf_q_num); + reg_bit_map = REG_RD(bp, reg_addr); + REG_WR(bp, reg_addr, reg_bit_map & (~q_bit_map)); + + /* set queue bit in new COS bit map */ + reg_addr = BNX2X_VOQ_Q_REG_ADDR(new_cos, pf_q_num); + reg_bit_map = REG_RD(bp, reg_addr); + REG_WR(bp, reg_addr, reg_bit_map | q_bit_map); + + /* set/clear queue bit in command-queue bit map + (E2/E3A0 only, valid COS values are 0/1) */ + if (!(INIT_MODE_FLAGS(bp) & MODE_E3_B0)) { + reg_addr = BNX2X_Q_CMDQ_REG_ADDR(pf_q_num); + reg_bit_map = REG_RD(bp, reg_addr); + q_bit_map = 1 << (2 * (pf_q_num & 0xf)); + reg_bit_map = new_cos ? + (reg_bit_map | q_bit_map) : + (reg_bit_map & (~q_bit_map)); + REG_WR(bp, reg_addr, reg_bit_map); + } + } + } +} + +/* Configures the QM according to the specified per-traffic-type COSes */ +static inline void bnx2x_dcb_config_qm(struct bnx2x *bp, + struct priority_cos *traffic_cos) +{ + bnx2x_map_q_cos(bp, BNX2X_FCOE_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_FCOE].cos); + bnx2x_map_q_cos(bp, BNX2X_ISCSI_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_ISCSI].cos); + if (INIT_MODE_FLAGS(bp) & MODE_COS_BC) { + /* required only in backward compatible COS mode */ + bnx2x_map_q_cos(bp, BNX2X_ETH_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos); + bnx2x_map_q_cos(bp, BNX2X_TOE_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos); + bnx2x_map_q_cos(bp, BNX2X_TOE_ACK_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos); + bnx2x_map_q_cos(bp, BNX2X_ISCSI_ACK_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_ISCSI].cos); + } +} + + +/* Returns the index of start or end of a specific block stage in ops array*/ +#define BLOCK_OPS_IDX(block, stage, end) \ + (2*(((block)*NUM_OF_INIT_PHASES) + (stage)) + (end)) + + #define INITOP_SET 0 /* set the HW directly */ #define INITOP_CLEAR 1 /* clear the HW directly */ #define INITOP_INIT 2 /* set the init-value array */ @@ -245,12 +377,15 @@ static const struct { BLOCK_PRTY_INFO_0(PXP2, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff), BLOCK_PRTY_INFO_1(PXP2, 0x7ff, 0x7f, 0x7f, 0x7ff), BLOCK_PRTY_INFO(HC, 0x7, 0x7, 0x7, 0), + BLOCK_PRTY_INFO(NIG, 0xffffffff, 0x3fffffff, 0xffffffff, 0), + BLOCK_PRTY_INFO_0(NIG, 0xffffffff, 0, 0, 0xffffffff), + BLOCK_PRTY_INFO_1(NIG, 0xffff, 0, 0, 0xffff), BLOCK_PRTY_INFO(IGU, 0x7ff, 0, 0, 0x7ff), BLOCK_PRTY_INFO(MISC, 0x1, 0x1, 0x1, 0x1), BLOCK_PRTY_INFO(QM, 0, 0x1ff, 0xfff, 0xfff), BLOCK_PRTY_INFO(DORQ, 0, 0x3, 0x3, 0x3), {GRCBASE_UPB + PB_REG_PB_PRTY_MASK, - GRCBASE_UPB + PB_REG_PB_PRTY_STS_CLR, 0, + GRCBASE_UPB + PB_REG_PB_PRTY_STS_CLR, 0xf, {0xf, 0xf, 0xf}, "UPB"}, {GRCBASE_XPB + PB_REG_PB_PRTY_MASK, GRCBASE_XPB + PB_REG_PB_PRTY_STS_CLR, 0, @@ -262,10 +397,16 @@ static const struct { BLOCK_PRTY_INFO(DMAE, 0, 0xf, 0xf, 0xf), BLOCK_PRTY_INFO(BRB1, 0, 0xf, 0xf, 0xf), BLOCK_PRTY_INFO(PRS, (1<<6), 0xff, 0xff, 0xff), + BLOCK_PRTY_INFO(PBF, 0, 0, 0x3ffff, 0xfffffff), + BLOCK_PRTY_INFO(TM, 0, 0, 0x7f, 0x7f), BLOCK_PRTY_INFO(TSDM, 0x18, 0x7ff, 0x7ff, 0x7ff), BLOCK_PRTY_INFO(CSDM, 0x8, 0x7ff, 0x7ff, 0x7ff), BLOCK_PRTY_INFO(USDM, 0x38, 0x7ff, 0x7ff, 0x7ff), BLOCK_PRTY_INFO(XSDM, 0x8, 0x7ff, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(TCM, 0, 0, 0x7ffffff, 0x7ffffff), + BLOCK_PRTY_INFO(CCM, 0, 0, 0x7ffffff, 0x7ffffff), + BLOCK_PRTY_INFO(UCM, 0, 0, 0x7ffffff, 0x7ffffff), + BLOCK_PRTY_INFO(XCM, 0, 0, 0x3fffffff, 0x3fffffff), BLOCK_PRTY_INFO_0(TSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff), BLOCK_PRTY_INFO_1(TSEM, 0, 0x3, 0x1f, 0x3f), BLOCK_PRTY_INFO_0(USEM, 0, 0xffffffff, 0xffffffff, 0xffffffff), |