diff options
Diffstat (limited to 'drivers/net/can/softing')
| -rw-r--r-- | drivers/net/can/softing/Kconfig | 30 | ||||
| -rw-r--r-- | drivers/net/can/softing/Makefile | 6 | ||||
| -rw-r--r-- | drivers/net/can/softing/softing.h | 167 | ||||
| -rw-r--r-- | drivers/net/can/softing/softing_cs.c | 359 | ||||
| -rw-r--r-- | drivers/net/can/softing/softing_fw.c | 691 | ||||
| -rw-r--r-- | drivers/net/can/softing/softing_main.c | 893 | ||||
| -rw-r--r-- | drivers/net/can/softing/softing_platform.h | 40 |
7 files changed, 2186 insertions, 0 deletions
diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig new file mode 100644 index 000000000000..92bd6bdde5e3 --- /dev/null +++ b/drivers/net/can/softing/Kconfig @@ -0,0 +1,30 @@ +config CAN_SOFTING + tristate "Softing Gmbh CAN generic support" + depends on CAN_DEV + ---help--- + Support for CAN cards from Softing Gmbh & some cards + from Vector Gmbh. + Softing Gmbh CAN cards come with 1 or 2 physical busses. + Those cards typically use Dual Port RAM to communicate + with the host CPU. The interface is then identical for PCI + and PCMCIA cards. This driver operates on a platform device, + which has been created by softing_cs or softing_pci driver. + Warning: + The API of the card does not allow fine control per bus, but + controls the 2 busses on the card together. + As such, some actions (start/stop/busoff recovery) on 1 bus + must bring down the other bus too temporarily. + +config CAN_SOFTING_CS + tristate "Softing Gmbh CAN pcmcia cards" + depends on PCMCIA + select CAN_SOFTING + ---help--- + Support for PCMCIA cards from Softing Gmbh & some cards + from Vector Gmbh. + You need firmware for these, which you can get at + http://developer.berlios.de/projects/socketcan/ + This version of the driver is written against + firmware version 4.6 (softing-fw-4.6-binaries.tar.gz) + In order to use the card as CAN device, you need the Softing generic + support too. diff --git a/drivers/net/can/softing/Makefile b/drivers/net/can/softing/Makefile new file mode 100644 index 000000000000..c5e5016c742e --- /dev/null +++ b/drivers/net/can/softing/Makefile @@ -0,0 +1,6 @@ + +softing-y := softing_main.o softing_fw.o +obj-$(CONFIG_CAN_SOFTING) += softing.o +obj-$(CONFIG_CAN_SOFTING_CS) += softing_cs.o + +ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG diff --git a/drivers/net/can/softing/softing.h b/drivers/net/can/softing/softing.h new file mode 100644 index 000000000000..7ec9f4db3d52 --- /dev/null +++ b/drivers/net/can/softing/softing.h @@ -0,0 +1,167 @@ +/* + * softing common interfaces + * + * by Kurt Van Dijck, 2008-2010 + */ + +#include <linux/atomic.h> +#include <linux/netdevice.h> +#include <linux/ktime.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/can.h> +#include <linux/can/dev.h> + +#include "softing_platform.h" + +struct softing; + +struct softing_priv { + struct can_priv can; /* must be the first member! */ + struct net_device *netdev; + struct softing *card; + struct { + int pending; + /* variables wich hold the circular buffer */ + int echo_put; + int echo_get; + } tx; + struct can_bittiming_const btr_const; + int index; + uint8_t output; + uint16_t chip; +}; +#define netdev2softing(netdev) ((struct softing_priv *)netdev_priv(netdev)) + +struct softing { + const struct softing_platform_data *pdat; + struct platform_device *pdev; + struct net_device *net[2]; + spinlock_t spin; /* protect this structure & DPRAM access */ + ktime_t ts_ref; + ktime_t ts_overflow; /* timestamp overflow value, in ktime */ + + struct { + /* indication of firmware status */ + int up; + /* protection of the 'up' variable */ + struct mutex lock; + } fw; + struct { + int nr; + int requested; + int svc_count; + unsigned int dpram_position; + } irq; + struct { + int pending; + int last_bus; + /* + * keep the bus that last tx'd a message, + * in order to let every netdev queue resume + */ + } tx; + __iomem uint8_t *dpram; + unsigned long dpram_phys; + unsigned long dpram_size; + struct { + uint16_t fw_version, hw_version, license, serial; + uint16_t chip[2]; + unsigned int freq; /* remote cpu's operating frequency */ + } id; +}; + +extern int softing_default_output(struct net_device *netdev); + +extern ktime_t softing_raw2ktime(struct softing *card, u32 raw); + +extern int softing_chip_poweron(struct softing *card); + +extern int softing_bootloader_command(struct softing *card, int16_t cmd, + const char *msg); + +/* Load firmware after reset */ +extern int softing_load_fw(const char *file, struct softing *card, + __iomem uint8_t *virt, unsigned int size, int offset); + +/* Load final application firmware after bootloader */ +extern int softing_load_app_fw(const char *file, struct softing *card); + +/* + * enable or disable irq + * only called with fw.lock locked + */ +extern int softing_enable_irq(struct softing *card, int enable); + +/* start/stop 1 bus on card */ +extern int softing_startstop(struct net_device *netdev, int up); + +/* netif_rx() */ +extern int softing_netdev_rx(struct net_device *netdev, + const struct can_frame *msg, ktime_t ktime); + +/* SOFTING DPRAM mappings */ +#define DPRAM_RX 0x0000 + #define DPRAM_RX_SIZE 32 + #define DPRAM_RX_CNT 16 +#define DPRAM_RX_RD 0x0201 /* uint8_t */ +#define DPRAM_RX_WR 0x0205 /* uint8_t */ +#define DPRAM_RX_LOST 0x0207 /* uint8_t */ + +#define DPRAM_FCT_PARAM 0x0300 /* int16_t [20] */ +#define DPRAM_FCT_RESULT 0x0328 /* int16_t */ +#define DPRAM_FCT_HOST 0x032b /* uint16_t */ + +#define DPRAM_INFO_BUSSTATE 0x0331 /* uint16_t */ +#define DPRAM_INFO_BUSSTATE2 0x0335 /* uint16_t */ +#define DPRAM_INFO_ERRSTATE 0x0339 /* uint16_t */ +#define DPRAM_INFO_ERRSTATE2 0x033d /* uint16_t */ +#define DPRAM_RESET 0x0341 /* uint16_t */ +#define DPRAM_CLR_RECV_FIFO 0x0345 /* uint16_t */ +#define DPRAM_RESET_TIME 0x034d /* uint16_t */ +#define DPRAM_TIME 0x0350 /* uint64_t */ +#define DPRAM_WR_START 0x0358 /* uint8_t */ +#define DPRAM_WR_END 0x0359 /* uint8_t */ +#define DPRAM_RESET_RX_FIFO 0x0361 /* uint16_t */ +#define DPRAM_RESET_TX_FIFO 0x0364 /* uint8_t */ +#define DPRAM_READ_FIFO_LEVEL 0x0365 /* uint8_t */ +#define DPRAM_RX_FIFO_LEVEL 0x0366 /* uint16_t */ +#define DPRAM_TX_FIFO_LEVEL 0x0366 /* uint16_t */ + +#define DPRAM_TX 0x0400 /* uint16_t */ + #define DPRAM_TX_SIZE 16 + #define DPRAM_TX_CNT 32 +#define DPRAM_TX_RD 0x0601 /* uint8_t */ +#define DPRAM_TX_WR 0x0605 /* uint8_t */ + +#define DPRAM_COMMAND 0x07e0 /* uint16_t */ +#define DPRAM_RECEIPT 0x07f0 /* uint16_t */ +#define DPRAM_IRQ_TOHOST 0x07fe /* uint8_t */ +#define DPRAM_IRQ_TOCARD 0x07ff /* uint8_t */ + +#define DPRAM_V2_RESET 0x0e00 /* uint8_t */ +#define DPRAM_V2_IRQ_TOHOST 0x0e02 /* uint8_t */ + +#define TXMAX (DPRAM_TX_CNT - 1) + +/* DPRAM return codes */ +#define RES_NONE 0 +#define RES_OK 1 +#define RES_NOK 2 +#define RES_UNKNOWN 3 +/* DPRAM flags */ +#define CMD_TX 0x01 +#define CMD_ACK 0x02 +#define CMD_XTD 0x04 +#define CMD_RTR 0x08 +#define CMD_ERR 0x10 +#define CMD_BUS2 0x80 + +/* returned fifo entry bus state masks */ +#define SF_MASK_BUSOFF 0x80 +#define SF_MASK_EPASSIVE 0x60 + +/* bus states */ +#define STATE_BUSOFF 2 +#define STATE_EPASSIVE 1 +#define STATE_EACTIVE 0 diff --git a/drivers/net/can/softing/softing_cs.c b/drivers/net/can/softing/softing_cs.c new file mode 100644 index 000000000000..300fe75dd1a7 --- /dev/null +++ b/drivers/net/can/softing/softing_cs.c @@ -0,0 +1,359 @@ +/* + * Copyright (C) 2008-2010 + * + * - Kurt Van Dijck, EIA Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> + +#include <pcmcia/cistpl.h> +#include <pcmcia/ds.h> + +#include "softing_platform.h" + +static int softingcs_index; +static spinlock_t softingcs_index_lock; + +static int softingcs_reset(struct platform_device *pdev, int v); +static int softingcs_enable_irq(struct platform_device *pdev, int v); + +/* + * platform_data descriptions + */ +#define MHZ (1000*1000) +static const struct softing_platform_data softingcs_platform_data[] = { +{ + .name = "CANcard", + .manf = 0x0168, .prod = 0x001, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "CANcard-NEC", + .manf = 0x0168, .prod = 0x002, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "CANcard-SJA", + .manf = 0x0168, .prod = 0x004, + .generation = 1, + .nbus = 2, + .freq = 20 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cansja.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "CANcard-2", + .manf = 0x0168, .prod = 0x005, + .generation = 2, + .nbus = 2, + .freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x1000, + .boot = {0x0000, 0x000000, fw_dir "bcard2.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",}, + .reset = softingcs_reset, + .enable_irq = NULL, +}, { + .name = "Vector-CANcard", + .manf = 0x0168, .prod = 0x081, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "Vector-CANcard-SJA", + .manf = 0x0168, .prod = 0x084, + .generation = 1, + .nbus = 2, + .freq = 20 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cansja.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "Vector-CANcard-2", + .manf = 0x0168, .prod = 0x085, + .generation = 2, + .nbus = 2, + .freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x1000, + .boot = {0x0000, 0x000000, fw_dir "bcard2.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",}, + .reset = softingcs_reset, + .enable_irq = NULL, +}, { + .name = "EDICcard-NEC", + .manf = 0x0168, .prod = 0x102, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "EDICcard-2", + .manf = 0x0168, .prod = 0x105, + .generation = 2, + .nbus = 2, + .freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x1000, + .boot = {0x0000, 0x000000, fw_dir "bcard2.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",}, + .reset = softingcs_reset, + .enable_irq = NULL, +}, { + 0, 0, +}, +}; + +MODULE_FIRMWARE(fw_dir "bcard.bin"); +MODULE_FIRMWARE(fw_dir "ldcard.bin"); +MODULE_FIRMWARE(fw_dir "cancard.bin"); +MODULE_FIRMWARE(fw_dir "cansja.bin"); + +MODULE_FIRMWARE(fw_dir "bcard2.bin"); +MODULE_FIRMWARE(fw_dir "ldcard2.bin"); +MODULE_FIRMWARE(fw_dir "cancrd2.bin"); + +static __devinit const struct softing_platform_data +*softingcs_find_platform_data(unsigned int manf, unsigned int prod) +{ + const struct softing_platform_data *lp; + + for (lp = softingcs_platform_data; lp->manf; ++lp) { + if ((lp->manf == manf) && (lp->prod == prod)) + return lp; + } + return NULL; +} + +/* + * platformdata callbacks + */ +static int softingcs_reset(struct platform_device *pdev, int v) +{ + struct pcmcia_device *pcmcia = to_pcmcia_dev(pdev->dev.parent); + + dev_dbg(&pdev->dev, "pcmcia config [2] %02x\n", v ? 0 : 0x20); + return pcmcia_write_config_byte(pcmcia, 2, v ? 0 : 0x20); +} + +static int softingcs_enable_irq(struct platform_device *pdev, int v) +{ + struct pcmcia_device *pcmcia = to_pcmcia_dev(pdev->dev.parent); + + dev_dbg(&pdev->dev, "pcmcia config [0] %02x\n", v ? 0x60 : 0); + return pcmcia_write_config_byte(pcmcia, 0, v ? 0x60 : 0); +} + +/* + * pcmcia check + */ +static __devinit int softingcs_probe_config(struct pcmcia_device *pcmcia, + void *priv_data) +{ + struct softing_platform_data *pdat = priv_data; + struct resource *pres; + int memspeed = 0; + + WARN_ON(!pdat); + pres = pcmcia->resource[PCMCIA_IOMEM_0]; + if (resource_size(pres) < 0x1000) + return -ERANGE; + + pres->flags |= WIN_MEMORY_TYPE_CM | WIN_ENABLE; + if (pdat->generation < 2) { + pres->flags |= WIN_USE_WAIT | WIN_DATA_WIDTH_8; + memspeed = 3; + } else { + pres->flags |= WIN_DATA_WIDTH_16; + } + return pcmcia_request_window(pcmcia, pres, memspeed); +} + +static __devexit void softingcs_remove(struct pcmcia_device *pcmcia) +{ + struct platform_device *pdev = pcmcia->priv; + + /* free bits */ + platform_device_unregister(pdev); + /* release pcmcia stuff */ + pcmcia_disable_device(pcmcia); +} + +/* + * platform_device wrapper + * pdev->resource has 2 entries: io & irq + */ +static void softingcs_pdev_release(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + kfree(pdev); +} + +static __devinit int softingcs_probe(struct pcmcia_device *pcmcia) +{ + int ret; + struct platform_device *pdev; + const struct softing_platform_data *pdat; + struct resource *pres; + struct dev { + struct platform_device pdev; + struct resource res[2]; + } *dev; + + /* find matching platform_data */ + pdat = softingcs_find_platform_data(pcmcia->manf_id, pcmcia->card_id); + if (!pdat) + return -ENOTTY; + + /* setup pcmcia device */ + pcmcia->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IOMEM | + CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; + ret = pcmcia_loop_config(pcmcia, softingcs_probe_config, (void *)pdat); + if (ret) + goto pcmcia_failed; + + ret = pcmcia_enable_device(pcmcia); + if (ret < 0) + goto pcmcia_failed; + + pres = pcmcia->resource[PCMCIA_IOMEM_0]; + if (!pres) { + ret = -EBADF; + goto pcmcia_bad; + } + + /* create softing platform device */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + ret = -ENOMEM; + goto mem_failed; + } + dev->pdev.resource = dev->res; + dev->pdev.num_resources = ARRAY_SIZE(dev->res); + dev->pdev.dev.release = softingcs_pdev_release; + + pdev = &dev->pdev; + pdev->dev.platform_data = (void *)pdat; + pdev->dev.parent = &pcmcia->dev; + pcmcia->priv = pdev; + + /* platform device resources */ + pdev->resource[0].flags = IORESOURCE_MEM; + pdev->resource[0].start = pres->start; + pdev->resource[0].end = pres->end; + + pdev->resource[1].flags = IORESOURCE_IRQ; + pdev->resource[1].start = pcmcia->irq; + pdev->resource[1].end = pdev->resource[1].start; + + /* platform device setup */ + spin_lock(&softingcs_index_lock); + pdev->id = softingcs_index++; + spin_unlock(&softingcs_index_lock); + pdev->name = "softing"; + dev_set_name(&pdev->dev, "softingcs.%i", pdev->id); + ret = platform_device_register(pdev); + if (ret < 0) + goto platform_failed; + + dev_info(&pcmcia->dev, "created %s\n", dev_name(&pdev->dev)); + return 0; + +platform_failed: + kfree(dev); +mem_failed: +pcmcia_bad: +pcmcia_failed: + pcmcia_disable_device(pcmcia); + pcmcia->priv = NULL; + return ret ?: -ENODEV; +} + +static /*const*/ struct pcmcia_device_id softingcs_ids[] = { + /* softing */ + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0001), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0004), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0005), + /* vector, manufacturer? */ + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0081), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0084), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0085), + /* EDIC */ + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0102), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0105), + PCMCIA_DEVICE_NULL, +}; + +MODULE_DEVICE_TABLE(pcmcia, softingcs_ids); + +static struct pcmcia_driver softingcs_driver = { + .owner = THIS_MODULE, + .name = "softingcs", + .id_table = softingcs_ids, + .probe = softingcs_probe, + .remove = __devexit_p(softingcs_remove), +}; + +static int __init softingcs_start(void) +{ + spin_lock_init(&softingcs_index_lock); + return pcmcia_register_driver(&softingcs_driver); +} + +static void __exit softingcs_stop(void) +{ + pcmcia_unregister_driver(&softingcs_driver); +} + +module_init(softingcs_start); +module_exit(softingcs_stop); + +MODULE_DESCRIPTION("softing CANcard driver" + ", links PCMCIA card to softing driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c new file mode 100644 index 000000000000..b520784fb197 --- /dev/null +++ b/drivers/net/can/softing/softing_fw.c @@ -0,0 +1,691 @@ +/* + * Copyright (C) 2008-2010 + * + * - Kurt Van Dijck, EIA Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/firmware.h> +#include <linux/sched.h> +#include <asm/div64.h> + +#include "softing.h" + +/* + * low level DPRAM command. + * Make sure that card->dpram[DPRAM_FCT_HOST] is preset + */ +static int _softing_fct_cmd(struct softing *card, int16_t cmd, uint16_t vector, + const char *msg) +{ + int ret; + unsigned long stamp; + + iowrite16(cmd, &card->dpram[DPRAM_FCT_PARAM]); + iowrite8(vector >> 8, &card->dpram[DPRAM_FCT_HOST + 1]); + iowrite8(vector, &card->dpram[DPRAM_FCT_HOST]); + /* be sure to flush this to the card */ + wmb(); + stamp = jiffies + 1 * HZ; + /* wait for card */ + do { + /* DPRAM_FCT_HOST is _not_ aligned */ + ret = ioread8(&card->dpram[DPRAM_FCT_HOST]) + + (ioread8(&card->dpram[DPRAM_FCT_HOST + 1]) << 8); + /* don't have any cached variables */ + rmb(); + if (ret == RES_OK) + /* read return-value now */ + return ioread16(&card->dpram[DPRAM_FCT_RESULT]); + + if ((ret != vector) || time_after(jiffies, stamp)) + break; + /* process context => relax */ + usleep_range(500, 10000); + } while (1); + + ret = (ret == RES_NONE) ? -ETIMEDOUT : -ECANCELED; + dev_alert(&card->pdev->dev, "firmware %s failed (%i)\n", msg, ret); + return ret; +} + +static int softing_fct_cmd(struct softing *card, int16_t cmd, const char *msg) +{ + int ret; + + ret = _softing_fct_cmd(card, cmd, 0, msg); + if (ret > 0) { + dev_alert(&card->pdev->dev, "%s returned %u\n", msg, ret); + ret = -EIO; + } + return ret; +} + +int softing_bootloader_command(struct softing *card, int16_t cmd, + const char *msg) +{ + int ret; + unsigned long stamp; + + iowrite16(RES_NONE, &card->dpram[DPRAM_RECEIPT]); + iowrite16(cmd, &card->dpram[DPRAM_COMMAND]); + /* be sure to flush this to the card */ + wmb(); + stamp = jiffies + 3 * HZ; + /* wait for card */ + do { + ret = ioread16(&card->dpram[DPRAM_RECEIPT]); + /* don't have any cached variables */ + rmb(); + if (ret == RES_OK) + return 0; + if (time_after(jiffies, stamp)) + break; + /* process context => relax */ + usleep_range(500, 10000); + } while (!signal_pending(current)); + + ret = (ret == RES_NONE) ? -ETIMEDOUT : -ECANCELED; + dev_alert(&card->pdev->dev, "bootloader %s failed (%i)\n", msg, ret); + return ret; +} + +static int fw_parse(const uint8_t **pmem, uint16_t *ptype, uint32_t *paddr, + uint16_t *plen, const uint8_t **pdat) +{ + uint16_t checksum[2]; + const uint8_t *mem; + const uint8_t *end; + + /* + * firmware records are a binary, unaligned stream composed of: + * uint16_t type; + * uint32_t addr; + * uint16_t len; + * uint8_t dat[len]; + * uint16_t checksum; + * all values in little endian. + * We could define a struct for this, with __attribute__((packed)), + * but would that solve the alignment in _all_ cases (cfr. the + * struct itself may be an odd address)? + * + * I chose to use leXX_to_cpup() since this solves both + * endianness & alignment. + */ + mem = *pmem; + *ptype = le16_to_cpup((void *)&mem[0]); + *paddr = le32_to_cpup((void *)&mem[2]); + *plen = le16_to_cpup((void *)&mem[6]); + *pdat = &mem[8]; + /* verify checksum */ + end = &mem[8 + *plen]; + checksum[0] = le16_to_cpup((void *)end); + for (checksum[1] = 0; mem < end; ++mem) + checksum[1] += *mem; + if (checksum[0] != checksum[1]) + return -EINVAL; + /* increment */ + *pmem += 10 + *plen; + return 0; +} + +int softing_load_fw(const char *file, struct softing *card, + __iomem uint8_t *dpram, unsigned int size, int offset) +{ + const struct firmware *fw; + int ret; + const uint8_t *mem, *end, *dat; + uint16_t type, len; + uint32_t addr; + uint8_t *buf = NULL; + int buflen = 0; + int8_t type_end = 0; + + ret = request_firmware(&fw, file, &card->pdev->dev); + if (ret < 0) + return ret; + dev_dbg(&card->pdev->dev, "%s, firmware(%s) got %u bytes" + ", offset %c0x%04x\n", + card->pdat->name, file, (unsigned int)fw->size, + (offset >= 0) ? '+' : '-', (unsigned int)abs(offset)); + /* parse the firmware */ + mem = fw->data; + end = &mem[fw->size]; + /* look for header record */ + ret = fw_parse(&mem, &type, &addr, &len, &dat); + if (ret < 0) + goto failed; + if (type != 0xffff) + goto failed; + if (strncmp("Structured Binary Format, Softing GmbH" , dat, len)) { + ret = -EINVAL; + goto failed; + } + /* ok, we had a header */ + while (mem < end) { + ret = fw_parse(&mem, &type, &addr, &len, &dat); + if (ret < 0) + goto failed; + if (type == 3) { + /* start address, not used here */ + continue; + } else if (type == 1) { + /* eof */ + type_end = 1; + break; + } else if (type != 0) { + ret = -EINVAL; + goto failed; + } + + if ((addr + len + offset) > size) + goto failed; + memcpy_toio(&dpram[addr + offset], dat, len); + /* be sure to flush caches from IO space */ + mb(); + if (len > buflen) { + /* align buflen */ + buflen = (len + (1024-1)) & ~(1024-1); + buf = krealloc(buf, buflen, GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto failed; + } + } + /* verify record data */ + memcpy_fromio(buf, &dpram[addr + offset], len); + if (memcmp(buf, dat, len)) { + /* is not ok */ + dev_alert(&card->pdev->dev, "DPRAM readback failed\n"); + ret = -EIO; + goto failed; + } + } + if (!type_end) + /* no end record seen */ + goto failed; + ret = 0; +failed: + kfree(buf); + release_firmware(fw); + if (ret < 0) + dev_info(&card->pdev->dev, "firmware %s failed\n", file); + return ret; +} + +int softing_load_app_fw(const char *file, struct softing *card) +{ + const struct firmware *fw; + const uint8_t *mem, *end, *dat; + int ret, j; + uint16_t type, len; + uint32_t addr, start_addr = 0; + unsigned int sum, rx_sum; + int8_t type_end = 0, type_entrypoint = 0; + + ret = request_firmware(&fw, file, &card->pdev->dev); + if (ret) { + dev_alert(&card->pdev->dev, "request_firmware(%s) got %i\n", + file, ret); + return ret; + } + dev_dbg(&card->pdev->dev, "firmware(%s) got %lu bytes\n", + file, (unsigned long)fw->size); + /* parse the firmware */ + mem = fw->data; + end = &mem[fw->size]; + /* look for header record */ + ret = fw_parse(&mem, &type, &addr, &len, &dat); + if (ret) + goto failed; + ret = -EINVAL; + if (type != 0xffff) { + dev_alert(&card->pdev->dev, "firmware starts with type 0x%x\n", + type); + goto failed; + } + if (strncmp("Structured Binary Format, Softing GmbH", dat, len)) { + dev_alert(&card->pdev->dev, "firmware string '%.*s' fault\n", + len, dat); + goto failed; + } + /* ok, we had a header */ + while (mem < end) { + ret = fw_parse(&mem, &type, &addr, &len, &dat); + if (ret) + goto failed; + + if (type == 3) { + /* start address */ + start_addr = addr; + type_entrypoint = 1; + continue; + } else if (type == 1) { + /* eof */ + type_end = 1; + break; + } else if (type != 0) { + dev_alert(&card->pdev->dev, + "unknown record type 0x%04x\n", type); + ret = -EINVAL; + goto failed; + } + + /* regualar data */ + for (sum = 0, j = 0; j < len; ++j) + sum += dat[j]; + /* work in 16bit (target) */ + sum &= 0xffff; + + memcpy_toio(&card->dpram[card->pdat->app.offs], dat, len); + iowrite32(card->pdat->app.offs + card->pdat->app.addr, + &card->dpram[DPRAM_COMMAND + 2]); + iowrite32(addr, &card->dpram[DPRAM_COMMAND + 6]); + iowrite16(len, &card->dpram[DPRAM_COMMAND + 10]); + iowrite8(1, &card->dpram[DPRAM_COMMAND + 12]); + ret = softing_bootloader_command(card, 1, "loading app."); + if (ret < 0) + goto failed; + /* verify checksum */ + rx_sum = ioread16(&card->dpram[DPRAM_RECEIPT + 2]); + if (rx_sum != sum) { + dev_alert(&card->pdev->dev, "SRAM seems to be damaged" + ", wanted 0x%04x, got 0x%04x\n", sum, rx_sum); + ret = -EIO; + goto failed; + } + } + if (!type_end || !type_entrypoint) + goto failed; + /* start application in card */ + iowrite32(start_addr, &card->dpram[DPRAM_COMMAND + 2]); + iowrite8(1, &card->dpram[DPRAM_COMMAND + 6]); + ret = softing_bootloader_command(card, 3, "start app."); + if (ret < 0) + goto failed; + ret = 0; +failed: + release_firmware(fw); + if (ret < 0) + dev_info(&card->pdev->dev, "firmware %s failed\n", file); + return ret; +} + +static int softing_reset_chip(struct softing *card) +{ + int ret; + + do { + /* reset chip */ + iowrite8(0, &card->dpram[DPRAM_RESET_RX_FIFO]); + iowrite8(0, &card->dpram[DPRAM_RESET_RX_FIFO+1]); + iowrite8(1, &card->dpram[DPRAM_RESET]); + iowrite8(0, &card->dpram[DPRAM_RESET+1]); + + ret = softing_fct_cmd(card, 0, "reset_can"); + if (!ret) + break; + if (signal_pending(current)) + /* don't wait any longer */ + break; + } while (1); + card->tx.pending = 0; + return ret; +} + +int softing_chip_poweron(struct softing *card) +{ + int ret; + /* sync */ + ret = _softing_fct_cmd(card, 99, 0x55, "sync-a"); + if (ret < 0) + goto failed; + + ret = _softing_fct_cmd(card, 99, 0xaa, "sync-b"); + if (ret < 0) + goto failed; + + ret = softing_reset_chip(card); + if (ret < 0) + goto failed; + /* get_serial */ + ret = softing_fct_cmd(card, 43, "get_serial_number"); + if (ret < 0) + goto failed; + card->id.serial = ioread32(&card->dpram[DPRAM_FCT_PARAM]); + /* get_version */ + ret = softing_fct_cmd(card, 12, "get_version"); + if (ret < 0) + goto failed; + card->id.fw_version = ioread16(&card->dpram[DPRAM_FCT_PARAM + 2]); + card->id.hw_version = ioread16(&card->dpram[DPRAM_FCT_PARAM + 4]); + card->id.license = ioread16(&card->dpram[DPRAM_FCT_PARAM + 6]); + card->id.chip[0] = ioread16(&card->dpram[DPRAM_FCT_PARAM + 8]); + card->id.chip[1] = ioread16(&card->dpram[DPRAM_FCT_PARAM + 10]); + return 0; +failed: + return ret; +} + +static void softing_initialize_timestamp(struct softing *card) +{ + uint64_t ovf; + + card->ts_ref = ktime_get(); + + /* 16MHz is the reference */ + ovf = 0x100000000ULL * 16; + do_div(ovf, card->pdat->freq ?: 16); + + card->ts_overflow = ktime_add_us(ktime_set(0, 0), ovf); +} + +ktime_t softing_raw2ktime(struct softing *card, u32 raw) +{ + uint64_t rawl; + ktime_t now, real_offset; + ktime_t target; + ktime_t tmp; + + now = ktime_get(); + real_offset = ktime_sub(ktime_get_real(), now); + + /* find nsec from card */ + rawl = raw * 16; + do_div(rawl, card->pdat->freq ?: 16); + target = ktime_add_us(card->ts_ref, rawl); + /* test for overflows */ + tmp = ktime_add(target, card->ts_overflow); + while (unlikely(ktime_to_ns(tmp) > ktime_to_ns(now))) { + card->ts_ref = ktime_add(card->ts_ref, card->ts_overflow); + target = tmp; + tmp = ktime_add(target, card->ts_overflow); + } + return ktime_add(target, real_offset); +} + +static inline int softing_error_reporting(struct net_device *netdev) +{ + struct softing_priv *priv = netdev_priv(netdev); + + return (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) + ? 1 : 0; +} + +int softing_startstop(struct net_device *dev, int up) +{ + int ret; + struct softing *card; + struct softing_priv *priv; + struct net_device *netdev; + int bus_bitmask_start; + int j, error_reporting; + struct can_frame msg; + const struct can_bittiming *bt; + + priv = netdev_priv(dev); + card = priv->card; + + if (!card->fw.up) + return -EIO; + + ret = mutex_lock_interruptible(&card->fw.lock); + if (ret) + return ret; + + bus_bitmask_start = 0; + if (dev && up) + /* prepare to start this bus as well */ + bus_bitmask_start |= (1 << priv->index); + /* bring netdevs down */ + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + netdev = card->net[j]; + if (!netdev) + continue; + priv = netdev_priv(netdev); + + if (dev != netdev) + netif_stop_queue(netdev); + + if (netif_running(netdev)) { + if (dev != netdev) + bus_bitmask_start |= (1 << j); + priv->tx.pending = 0; + priv->tx.echo_put = 0; + priv->tx.echo_get = 0; + /* + * this bus' may just have called open_candev() + * which is rather stupid to call close_candev() + * already + * but we may come here from busoff recovery too + * in which case the echo_skb _needs_ flushing too. + * just be sure to call open_candev() again + */ + close_candev(netdev); + } + priv->can.state = CAN_STATE_STOPPED; + } + card->tx.pending = 0; + + softing_enable_irq(card, 0); + ret = softing_reset_chip(card); + if (ret) + goto failed; + if (!bus_bitmask_start) + /* no busses to be brought up */ + goto card_done; + + if ((bus_bitmask_start & 1) && (bus_bitmask_start & 2) + && (softing_error_reporting(card->net[0]) + != softing_error_reporting(card->net[1]))) { + dev_alert(&card->pdev->dev, + "err_reporting flag differs for busses\n"); + goto invalid; + } + error_reporting = 0; + if (bus_bitmask_start & 1) { + netdev = card->net[0]; + priv = netdev_priv(netdev); + error_reporting += softing_error_reporting(netdev); + /* init chip 1 */ + bt = &priv->can.bittiming; + iowrite16(bt->brp, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(bt->sjw, &card->dpram[DPRAM_FCT_PARAM + 4]); + iowrite16(bt->phase_seg1 + bt->prop_seg, + &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(bt->phase_seg2, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) ? 1 : 0, + &card->dpram[DPRAM_FCT_PARAM + 10]); + ret = softing_fct_cmd(card, 1, "initialize_chip[0]"); + if (ret < 0) + goto failed; + /* set mode */ + iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 4]); + ret = softing_fct_cmd(card, 3, "set_mode[0]"); + if (ret < 0) + goto failed; + /* set filter */ + /* 11bit id & mask */ + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(0x07ff, &card->dpram[DPRAM_FCT_PARAM + 4]); + /* 29bit id.lo & mask.lo & id.hi & mask.hi */ + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(0xffff, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 10]); + iowrite16(0x1fff, &card->dpram[DPRAM_FCT_PARAM + 12]); + ret = softing_fct_cmd(card, 7, "set_filter[0]"); + if (ret < 0) + goto failed; + /* set output control */ + iowrite16(priv->output, &card->dpram[DPRAM_FCT_PARAM + 2]); + ret = softing_fct_cmd(card, 5, "set_output[0]"); + if (ret < 0) + goto failed; + } + if (bus_bitmask_start & 2) { + netdev = card->net[1]; + priv = netdev_priv(netdev); + error_reporting += softing_error_reporting(netdev); + /* init chip2 */ + bt = &priv->can.bittiming; + iowrite16(bt->brp, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(bt->sjw, &card->dpram[DPRAM_FCT_PARAM + 4]); + iowrite16(bt->phase_seg1 + bt->prop_seg, + &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(bt->phase_seg2, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) ? 1 : 0, + &card->dpram[DPRAM_FCT_PARAM + 10]); + ret = softing_fct_cmd(card, 2, "initialize_chip[1]"); + if (ret < 0) + goto failed; + /* set mode2 */ + iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 4]); + ret = softing_fct_cmd(card, 4, "set_mode[1]"); + if (ret < 0) + goto failed; + /* set filter2 */ + /* 11bit id & mask */ + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(0x07ff, &card->dpram[DPRAM_FCT_PARAM + 4]); + /* 29bit id.lo & mask.lo & id.hi & mask.hi */ + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(0xffff, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 10]); + iowrite16(0x1fff, &card->dpram[DPRAM_FCT_PARAM + 12]); + ret = softing_fct_cmd(card, 8, "set_filter[1]"); + if (ret < 0) + goto failed; + /* set output control2 */ + iowrite16(priv->output, &card->dpram[DPRAM_FCT_PARAM + 2]); + ret = softing_fct_cmd(card, 6, "set_output[1]"); + if (ret < 0) + goto failed; + } + /* enable_error_frame */ + /* + * Error reporting is switched off at the moment since + * the receiving of them is not yet 100% verified + * This should be enabled sooner or later + * + if (error_reporting) { + ret = softing_fct_cmd(card, 51, "enable_error_frame"); + if (ret < 0) + goto failed; + } + */ + /* initialize interface */ + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 4]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 10]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 12]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 14]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 16]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 18]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 20]); + ret = softing_fct_cmd(card, 17, "initialize_interface"); + if (ret < 0) + goto failed; + /* enable_fifo */ + ret = softing_fct_cmd(card, 36, "enable_fifo"); + if (ret < 0) + goto failed; + /* enable fifo tx ack */ + ret = softing_fct_cmd(card, 13, "fifo_tx_ack[0]"); + if (ret < 0) + goto failed; + /* enable fifo tx ack2 */ + ret = softing_fct_cmd(card, 14, "fifo_tx_ack[1]"); + if (ret < 0) + goto failed; + /* start_chip */ + ret = softing_fct_cmd(card, 11, "start_chip"); + if (ret < 0) + goto failed; + iowrite8(0, &card->dpram[DPRAM_INFO_BUSSTATE]); + iowrite8(0, &card->dpram[DPRAM_INFO_BUSSTATE2]); + if (card->pdat->generation < 2) { + iowrite8(0, &card->dpram[DPRAM_V2_IRQ_TOHOST]); + /* flush the DPRAM caches */ + wmb(); + } + + softing_initialize_timestamp(card); + + /* + * do socketcan notifications/status changes + * from here, no errors should occur, or the failed: part + * must be reviewed + */ + memset(&msg, 0, sizeof(msg)); + msg.can_id = CAN_ERR_FLAG | CAN_ERR_RESTARTED; + msg.can_dlc = CAN_ERR_DLC; + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (!(bus_bitmask_start & (1 << j))) + continue; + netdev = card->net[j]; + if (!netdev) + continue; + priv = netdev_priv(netdev); + priv->can.state = CAN_STATE_ERROR_ACTIVE; + open_candev(netdev); + if (dev != netdev) { + /* notify other busses on the restart */ + softing_netdev_rx(netdev, &msg, ktime_set(0, 0)); + ++priv->can.can_stats.restarts; + } + netif_wake_queue(netdev); + } + + /* enable interrupts */ + ret = softing_enable_irq(card, 1); + if (ret) + goto failed; +card_done: + mutex_unlock(&card->fw.lock); + return 0; +invalid: + ret = -EINVAL; +failed: + softing_enable_irq(card, 0); + softing_reset_chip(card); + mutex_unlock(&card->fw.lock); + /* bring all other interfaces down */ + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + netdev = card->net[j]; + if (!netdev) + continue; + dev_close(netdev); + } + return ret; +} + +int softing_default_output(struct net_device *netdev) +{ + struct softing_priv *priv = netdev_priv(netdev); + struct softing *card = priv->card; + + switch (priv->chip) { + case 1000: + return (card->pdat->generation < 2) ? 0xfb : 0xfa; + case 5: + return 0x60; + default: + return 0x40; + } +} diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c new file mode 100644 index 000000000000..5157e15e96eb --- /dev/null +++ b/drivers/net/can/softing/softing_main.c @@ -0,0 +1,893 @@ +/* + * Copyright (C) 2008-2010 + * + * - Kurt Van Dijck, EIA Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> + +#include "softing.h" + +#define TX_ECHO_SKB_MAX (((TXMAX+1)/2)-1) + +/* + * test is a specific CAN netdev + * is online (ie. up 'n running, not sleeping, not busoff + */ +static inline int canif_is_active(struct net_device *netdev) +{ + struct can_priv *can = netdev_priv(netdev); + + if (!netif_running(netdev)) + return 0; + return (can->state <= CAN_STATE_ERROR_PASSIVE); +} + +/* reset DPRAM */ +static inline void softing_set_reset_dpram(struct softing *card) +{ + if (card->pdat->generation >= 2) { + spin_lock_bh(&card->spin); + iowrite8(ioread8(&card->dpram[DPRAM_V2_RESET]) & ~1, + &card->dpram[DPRAM_V2_RESET]); + spin_unlock_bh(&card->spin); + } +} + +static inline void softing_clr_reset_dpram(struct softing *card) +{ + if (card->pdat->generation >= 2) { + spin_lock_bh(&card->spin); + iowrite8(ioread8(&card->dpram[DPRAM_V2_RESET]) | 1, + &card->dpram[DPRAM_V2_RESET]); + spin_unlock_bh(&card->spin); + } +} + +/* trigger the tx queue-ing */ +static netdev_tx_t softing_netdev_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct softing_priv *priv = netdev_priv(dev); + struct softing *card = priv->card; + int ret; + uint8_t *ptr; + uint8_t fifo_wr, fifo_rd; + struct can_frame *cf = (struct can_frame *)skb->data; + uint8_t buf[DPRAM_TX_SIZE]; + + if (can_dropped_invalid_skb(dev, skb)) + return NETDEV_TX_OK; + + spin_lock(&card->spin); + + ret = NETDEV_TX_BUSY; + if (!card->fw.up || + (card->tx.pending >= TXMAX) || + (priv->tx.pending >= TX_ECHO_SKB_MAX)) + goto xmit_done; + fifo_wr = ioread8(&card->dpram[DPRAM_TX_WR]); + fifo_rd = ioread8(&card->dpram[DPRAM_TX_RD]); + if (fifo_wr == fifo_rd) + /* fifo full */ + goto xmit_done; + memset(buf, 0, sizeof(buf)); + ptr = buf; + *ptr = CMD_TX; + if (cf->can_id & CAN_RTR_FLAG) + *ptr |= CMD_RTR; + if (cf->can_id & CAN_EFF_FLAG) + *ptr |= CMD_XTD; + if (priv->index) + *ptr |= CMD_BUS2; + ++ptr; + *ptr++ = cf->can_dlc; + *ptr++ = (cf->can_id >> 0); + *ptr++ = (cf->can_id >> 8); + if (cf->can_id & CAN_EFF_FLAG) { + *ptr++ = (cf->can_id >> 16); + *ptr++ = (cf->can_id >> 24); + } else { + /* increment 1, not 2 as you might think */ + ptr += 1; + } + if (!(cf->can_id & CAN_RTR_FLAG)) + memcpy(ptr, &cf->data[0], cf->can_dlc); + memcpy_toio(&card->dpram[DPRAM_TX + DPRAM_TX_SIZE * fifo_wr], + buf, DPRAM_TX_SIZE); + if (++fifo_wr >= DPRAM_TX_CNT) + fifo_wr = 0; + iowrite8(fifo_wr, &card->dpram[DPRAM_TX_WR]); + card->tx.last_bus = priv->index; + ++card->tx.pending; + ++priv->tx.pending; + can_put_echo_skb(skb, dev, priv->tx.echo_put); + ++priv->tx.echo_put; + if (priv->tx.echo_put >= TX_ECHO_SKB_MAX) + priv->tx.echo_put = 0; + /* can_put_echo_skb() saves the skb, safe to return TX_OK */ + ret = NETDEV_TX_OK; +xmit_done: + spin_unlock(&card->spin); + if (card->tx.pending >= TXMAX) { + int j; + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (card->net[j]) + netif_stop_queue(card->net[j]); + } + } + if (ret != NETDEV_TX_OK) + netif_stop_queue(dev); + + return ret; +} + +/* + * shortcut for skb delivery + */ +int softing_netdev_rx(struct net_device *netdev, const struct can_frame *msg, + ktime_t ktime) +{ + struct sk_buff *skb; + struct can_frame *cf; + + skb = alloc_can_skb(netdev, &cf); + if (!skb) + return -ENOMEM; + memcpy(cf, msg, sizeof(*msg)); + skb->tstamp = ktime; + return netif_rx(skb); +} + +/* + * softing_handle_1 + * pop 1 entry from the DPRAM queue, and process + */ +static int softing_handle_1(struct softing *card) +{ + struct net_device *netdev; + struct softing_priv *priv; + ktime_t ktime; + struct can_frame msg; + int cnt = 0, lost_msg; + uint8_t fifo_rd, fifo_wr, cmd; + uint8_t *ptr; + uint32_t tmp_u32; + uint8_t buf[DPRAM_RX_SIZE]; + + memset(&msg, 0, sizeof(msg)); + /* test for lost msgs */ + lost_msg = ioread8(&card->dpram[DPRAM_RX_LOST]); + if (lost_msg) { + int j; + /* reset condition */ + iowrite8(0, &card->dpram[DPRAM_RX_LOST]); + /* prepare msg */ + msg.can_id = CAN_ERR_FLAG | CAN_ERR_CRTL; + msg.can_dlc = CAN_ERR_DLC; + msg.data[1] = CAN_ERR_CRTL_RX_OVERFLOW; + /* + * service to all busses, we don't know which it was applicable + * but only service busses that are online + */ + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + netdev = card->net[j]; + if (!netdev) + continue; + if (!canif_is_active(netdev)) + /* a dead bus has no overflows */ + continue; + ++netdev->stats.rx_over_errors; + softing_netdev_rx(netdev, &msg, ktime_set(0, 0)); + } + /* prepare for other use */ + memset(&msg, 0, sizeof(msg)); + ++cnt; + } + + fifo_rd = ioread8(&card->dpram[DPRAM_RX_RD]); + fifo_wr = ioread8(&card->dpram[DPRAM_RX_WR]); + + if (++fifo_rd >= DPRAM_RX_CNT) + fifo_rd = 0; + if (fifo_wr == fifo_rd) + return cnt; + + memcpy_fromio(buf, &card->dpram[DPRAM_RX + DPRAM_RX_SIZE*fifo_rd], + DPRAM_RX_SIZE); + mb(); + /* trigger dual port RAM */ + iowrite8(fifo_rd, &card->dpram[DPRAM_RX_RD]); + + ptr = buf; + cmd = *ptr++; + if (cmd == 0xff) + /* not quite usefull, probably the card has got out */ + return 0; + netdev = card->net[0]; + if (cmd & CMD_BUS2) + netdev = card->net[1]; + priv = netdev_priv(netdev); + + if (cmd & CMD_ERR) { + uint8_t can_state, state; + + state = *ptr++; + + msg.can_id = CAN_ERR_FLAG; + msg.can_dlc = CAN_ERR_DLC; + + if (state & SF_MASK_BUSOFF) { + can_state = CAN_STATE_BUS_OFF; + msg.can_id |= CAN_ERR_BUSOFF; + state = STATE_BUSOFF; + } else if (state & SF_MASK_EPASSIVE) { + can_state = CAN_STATE_ERROR_PASSIVE; + msg.can_id |= CAN_ERR_CRTL; + msg.data[1] = CAN_ERR_CRTL_TX_PASSIVE; + state = STATE_EPASSIVE; + } else { + can_state = CAN_STATE_ERROR_ACTIVE; + msg.can_id |= CAN_ERR_CRTL; + state = STATE_EACTIVE; + } + /* update DPRAM */ + iowrite8(state, &card->dpram[priv->index ? + DPRAM_INFO_BUSSTATE2 : DPRAM_INFO_BUSSTATE]); + /* timestamp */ + tmp_u32 = le32_to_cpup((void *)ptr); + ptr += 4; + ktime = softing_raw2ktime(card, tmp_u32); + + ++netdev->stats.rx_errors; + /* update internal status */ + if (can_state != priv->can.state) { + priv->can.state = can_state; + if (can_state == CAN_STATE_ERROR_PASSIVE) + ++priv->can.can_stats.error_passive; + else if (can_state == CAN_STATE_BUS_OFF) { + /* this calls can_close_cleanup() */ + can_bus_off(netdev); + netif_stop_queue(netdev); + } + /* trigger socketcan */ + softing_netdev_rx(netdev, &msg, ktime); + } + + } else { + if (cmd & CMD_RTR) + msg.can_id |= CAN_RTR_FLAG; + msg.can_dlc = get_can_dlc(*ptr++); + if (cmd & CMD_XTD) { + msg.can_id |= CAN_EFF_FLAG; + msg.can_id |= le32_to_cpup((void *)ptr); + ptr += 4; + } else { + msg.can_id |= le16_to_cpup((void *)ptr); + ptr += 2; + } + /* timestamp */ + tmp_u32 = le32_to_cpup((void *)ptr); + ptr += 4; + ktime = softing_raw2ktime(card, tmp_u32); + if (!(msg.can_id & CAN_RTR_FLAG)) + memcpy(&msg.data[0], ptr, 8); + ptr += 8; + /* update socket */ + if (cmd & CMD_ACK) { + /* acknowledge, was tx msg */ + struct sk_buff *skb; + skb = priv->can.echo_skb[priv->tx.echo_get]; + if (skb) + skb->tstamp = ktime; + can_get_echo_skb(netdev, priv->tx.echo_get); + ++priv->tx.echo_get; + if (priv->tx.echo_get >= TX_ECHO_SKB_MAX) + priv->tx.echo_get = 0; + if (priv->tx.pending) + --priv->tx.pending; + if (card->tx.pending) + --card->tx.pending; + ++netdev->stats.tx_packets; + if (!(msg.can_id & CAN_RTR_FLAG)) + netdev->stats.tx_bytes += msg.can_dlc; + } else { + int ret; + + ret = softing_netdev_rx(netdev, &msg, ktime); + if (ret == NET_RX_SUCCESS) { + ++netdev->stats.rx_packets; + if (!(msg.can_id & CAN_RTR_FLAG)) + netdev->stats.rx_bytes += msg.can_dlc; + } else { + ++netdev->stats.rx_dropped; + } + } + } + ++cnt; + return cnt; +} + +/* + * real interrupt handler + */ +static irqreturn_t softing_irq_thread(int irq, void *dev_id) +{ + struct softing *card = (struct softing *)dev_id; + struct net_device *netdev; + struct softing_priv *priv; + int j, offset, work_done; + + work_done = 0; + spin_lock_bh(&card->spin); + while (softing_handle_1(card) > 0) { + ++card->irq.svc_count; + ++work_done; + } + spin_unlock_bh(&card->spin); + /* resume tx queue's */ + offset = card->tx.last_bus; + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (card->tx.pending >= TXMAX) + break; + netdev = card->net[(j + offset + 1) % card->pdat->nbus]; + if (!netdev) + continue; + priv = netdev_priv(netdev); + if (!canif_is_active(netdev)) + /* it makes no sense to wake dead busses */ + continue; + if (priv->tx.pending >= TX_ECHO_SKB_MAX) + continue; + ++work_done; + netif_wake_queue(netdev); + } + return work_done ? IRQ_HANDLED : IRQ_NONE; +} + +/* + * interrupt routines: + * schedule the 'real interrupt handler' + */ +static irqreturn_t softing_irq_v2(int irq, void *dev_id) +{ + struct softing *card = (struct softing *)dev_id; + uint8_t ir; + + ir = ioread8(&card->dpram[DPRAM_V2_IRQ_TOHOST]); + iowrite8(0, &card->dpram[DPRAM_V2_IRQ_TOHOST]); + return (1 == ir) ? IRQ_WAKE_THREAD : IRQ_NONE; +} + +static irqreturn_t softing_irq_v1(int irq, void *dev_id) +{ + struct softing *card = (struct softing *)dev_id; + uint8_t ir; + + ir = ioread8(&card->dpram[DPRAM_IRQ_TOHOST]); + iowrite8(0, &card->dpram[DPRAM_IRQ_TOHOST]); + return ir ? IRQ_WAKE_THREAD : IRQ_NONE; +} + +/* + * netdev/candev inter-operability + */ +static int softing_netdev_open(struct net_device *ndev) +{ + int ret; + + /* check or determine and set bittime */ + ret = open_candev(ndev); + if (!ret) + ret = softing_startstop(ndev, 1); + return ret; +} + +static int softing_netdev_stop(struct net_device *ndev) +{ + int ret; + + netif_stop_queue(ndev); + + /* softing cycle does close_candev() */ + ret = softing_startstop(ndev, 0); + return ret; +} + +static int softing_candev_set_mode(struct net_device *ndev, enum can_mode mode) +{ + int ret; + + switch (mode) { + case CAN_MODE_START: + /* softing_startstop does close_candev() */ + ret = softing_startstop(ndev, 1); + return ret; + case CAN_MODE_STOP: + case CAN_MODE_SLEEP: + return -EOPNOTSUPP; + } + return 0; +} + +/* + * Softing device management helpers + */ +int softing_enable_irq(struct softing *card, int enable) +{ + int ret; + + if (!card->irq.nr) { + return 0; + } else if (card->irq.requested && !enable) { + free_irq(card->irq.nr, card); + card->irq.requested = 0; + } else if (!card->irq.requested && enable) { + ret = request_threaded_irq(card->irq.nr, + (card->pdat->generation >= 2) ? + softing_irq_v2 : softing_irq_v1, + softing_irq_thread, IRQF_SHARED, + dev_name(&card->pdev->dev), card); + if (ret) { + dev_alert(&card->pdev->dev, + "request_threaded_irq(%u) failed\n", + card->irq.nr); + return ret; + } + card->irq.requested = 1; + } + return 0; +} + +static void softing_card_shutdown(struct softing *card) +{ + int fw_up = 0; + + if (mutex_lock_interruptible(&card->fw.lock)) + /* return -ERESTARTSYS */; + fw_up = card->fw.up; + card->fw.up = 0; + + if (card->irq.requested && card->irq.nr) { + free_irq(card->irq.nr, card); + card->irq.requested = 0; + } + if (fw_up) { + if (card->pdat->enable_irq) + card->pdat->enable_irq(card->pdev, 0); + softing_set_reset_dpram(card); + if (card->pdat->reset) + card->pdat->reset(card->pdev, 1); + } + mutex_unlock(&card->fw.lock); +} + +static __devinit int softing_card_boot(struct softing *card) +{ + int ret, j; + static const uint8_t stream[] = { + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, }; + unsigned char back[sizeof(stream)]; + + if (mutex_lock_interruptible(&card->fw.lock)) + return -ERESTARTSYS; + if (card->fw.up) { + mutex_unlock(&card->fw.lock); + return 0; + } + /* reset board */ + if (card->pdat->enable_irq) + card->pdat->enable_irq(card->pdev, 1); + /* boot card */ + softing_set_reset_dpram(card); + if (card->pdat->reset) + card->pdat->reset(card->pdev, 1); + for (j = 0; (j + sizeof(stream)) < card->dpram_size; + j += sizeof(stream)) { + + memcpy_toio(&card->dpram[j], stream, sizeof(stream)); + /* flush IO cache */ + mb(); + memcpy_fromio(back, &card->dpram[j], sizeof(stream)); + + if (!memcmp(back, stream, sizeof(stream))) + continue; + /* memory is not equal */ + dev_alert(&card->pdev->dev, "dpram failed at 0x%04x\n", j); + ret = -EIO; + goto failed; + } + wmb(); + /* load boot firmware */ + ret = softing_load_fw(card->pdat->boot.fw, card, card->dpram, + card->dpram_size, + card->pdat->boot.offs - card->pdat->boot.addr); + if (ret < 0) + goto failed; + /* load loader firmware */ + ret = softing_load_fw(card->pdat->load.fw, card, card->dpram, + card->dpram_size, + card->pdat->load.offs - card->pdat->load.addr); + if (ret < 0) + goto failed; + + if (card->pdat->reset) + card->pdat->reset(card->pdev, 0); + softing_clr_reset_dpram(card); + ret = softing_bootloader_command(card, 0, "card boot"); + if (ret < 0) + goto failed; + ret = softing_load_app_fw(card->pdat->app.fw, card); + if (ret < 0) + goto failed; + + ret = softing_chip_poweron(card); + if (ret < 0) + goto failed; + + card->fw.up = 1; + mutex_unlock(&card->fw.lock); + return 0; +failed: + card->fw.up = 0; + if (card->pdat->enable_irq) + card->pdat->enable_irq(card->pdev, 0); + softing_set_reset_dpram(card); + if (card->pdat->reset) + card->pdat->reset(card->pdev, 1); + mutex_unlock(&card->fw.lock); + return ret; +} + +/* + * netdev sysfs + */ +static ssize_t show_channel(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct net_device *ndev = to_net_dev(dev); + struct softing_priv *priv = netdev2softing(ndev); + + return sprintf(buf, "%i\n", priv->index); +} + +static ssize_t show_chip(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct net_device *ndev = to_net_dev(dev); + struct softing_priv *priv = netdev2softing(ndev); + + return sprintf(buf, "%i\n", priv->chip); +} + +static ssize_t show_output(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct net_device *ndev = to_net_dev(dev); + struct softing_priv *priv = netdev2softing(ndev); + + return sprintf(buf, "0x%02x\n", priv->output); +} + +static ssize_t store_output(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct net_device *ndev = to_net_dev(dev); + struct softing_priv *priv = netdev2softing(ndev); + struct softing *card = priv->card; + unsigned long val; + int ret; + + ret = strict_strtoul(buf, 0, &val); + if (ret < 0) + return ret; + val &= 0xFF; + + ret = mutex_lock_interruptible(&card->fw.lock); + if (ret) + return -ERESTARTSYS; + if (netif_running(ndev)) { + mutex_unlock(&card->fw.lock); + return -EBUSY; + } + priv->output = val; + mutex_unlock(&card->fw.lock); + return count; +} + +static const DEVICE_ATTR(channel, S_IRUGO, show_channel, NULL); +static const DEVICE_ATTR(chip, S_IRUGO, show_chip, NULL); +static const DEVICE_ATTR(output, S_IRUGO | S_IWUSR, show_output, store_output); + +static const struct attribute *const netdev_sysfs_attrs[] = { + &dev_attr_channel.attr, + &dev_attr_chip.attr, + &dev_attr_output.attr, + NULL, +}; +static const struct attribute_group netdev_sysfs_group = { + .name = NULL, + .attrs = (struct attribute **)netdev_sysfs_attrs, +}; + +static const struct net_device_ops softing_netdev_ops = { + .ndo_open = softing_netdev_open, + .ndo_stop = softing_netdev_stop, + .ndo_start_xmit = softing_netdev_start_xmit, +}; + +static const struct can_bittiming_const softing_btr_const = { + .tseg1_min = 1, + .tseg1_max = 16, + .tseg2_min = 1, + .tseg2_max = 8, + .sjw_max = 4, /* overruled */ + .brp_min = 1, + .brp_max = 32, /* overruled */ + .brp_inc = 1, +}; + + +static __devinit struct net_device *softing_netdev_create(struct softing *card, + uint16_t chip_id) +{ + struct net_device *netdev; + struct softing_priv *priv; + + netdev = alloc_candev(sizeof(*priv), TX_ECHO_SKB_MAX); + if (!netdev) { + dev_alert(&card->pdev->dev, "alloc_candev failed\n"); + return NULL; + } + priv = netdev_priv(netdev); + priv->netdev = netdev; + priv->card = card; + memcpy(&priv->btr_const, &softing_btr_const, sizeof(priv->btr_const)); + priv->btr_const.brp_max = card->pdat->max_brp; + priv->btr_const.sjw_max = card->pdat->max_sjw; + priv->can.bittiming_const = &priv->btr_const; + priv->can.clock.freq = 8000000; + priv->chip = chip_id; + priv->output = softing_default_output(netdev); + SET_NETDEV_DEV(netdev, &card->pdev->dev); + + netdev->flags |= IFF_ECHO; + netdev->netdev_ops = &softing_netdev_ops; + priv->can.do_set_mode = softing_candev_set_mode; + priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES; + + return netdev; +} + +static __devinit int softing_netdev_register(struct net_device *netdev) +{ + int ret; + + netdev->sysfs_groups[0] = &netdev_sysfs_group; + ret = register_candev(netdev); + if (ret) { + dev_alert(&netdev->dev, "register failed\n"); + return ret; + } + return 0; +} + +static void softing_netdev_cleanup(struct net_device *netdev) +{ + unregister_candev(netdev); + free_candev(netdev); +} + +/* + * sysfs for Platform device + */ +#define DEV_ATTR_RO(name, member) \ +static ssize_t show_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct softing *card = platform_get_drvdata(to_platform_device(dev)); \ + return sprintf(buf, "%u\n", card->member); \ +} \ +static DEVICE_ATTR(name, 0444, show_##name, NULL) + +#define DEV_ATTR_RO_STR(name, member) \ +static ssize_t show_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct softing *card = platform_get_drvdata(to_platform_device(dev)); \ + return sprintf(buf, "%s\n", card->member); \ +} \ +static DEVICE_ATTR(name, 0444, show_##name, NULL) + +DEV_ATTR_RO(serial, id.serial); +DEV_ATTR_RO_STR(firmware, pdat->app.fw); +DEV_ATTR_RO(firmware_version, id.fw_version); +DEV_ATTR_RO_STR(hardware, pdat->name); +DEV_ATTR_RO(hardware_version, id.hw_version); +DEV_ATTR_RO(license, id.license); +DEV_ATTR_RO(frequency, id.freq); +DEV_ATTR_RO(txpending, tx.pending); + +static struct attribute *softing_pdev_attrs[] = { + &dev_attr_serial.attr, + &dev_attr_firmware.attr, + &dev_attr_firmware_version.attr, + &dev_attr_hardware.attr, + &dev_attr_hardware_version.attr, + &dev_attr_license.attr, + &dev_attr_frequency.attr, + &dev_attr_txpending.attr, + NULL, +}; + +static const struct attribute_group softing_pdev_group = { + .name = NULL, + .attrs = softing_pdev_attrs, +}; + +/* + * platform driver + */ +static __devexit int softing_pdev_remove(struct platform_device *pdev) +{ + struct softing *card = platform_get_drvdata(pdev); + int j; + + /* first, disable card*/ + softing_card_shutdown(card); + + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (!card->net[j]) + continue; + softing_netdev_cleanup(card->net[j]); + card->net[j] = NULL; + } + sysfs_remove_group(&pdev->dev.kobj, &softing_pdev_group); + + iounmap(card->dpram); + kfree(card); + return 0; +} + +static __devinit int softing_pdev_probe(struct platform_device *pdev) +{ + const struct softing_platform_data *pdat = pdev->dev.platform_data; + struct softing *card; + struct net_device *netdev; + struct softing_priv *priv; + struct resource *pres; + int ret; + int j; + + if (!pdat) { + dev_warn(&pdev->dev, "no platform data\n"); + return -EINVAL; + } + if (pdat->nbus > ARRAY_SIZE(card->net)) { + dev_warn(&pdev->dev, "%u nets??\n", pdat->nbus); + return -EINVAL; + } + + card = kzalloc(sizeof(*card), GFP_KERNEL); + if (!card) + return -ENOMEM; + card->pdat = pdat; + card->pdev = pdev; + platform_set_drvdata(pdev, card); + mutex_init(&card->fw.lock); + spin_lock_init(&card->spin); + + ret = -EINVAL; + pres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!pres) + goto platform_resource_failed;; + card->dpram_phys = pres->start; + card->dpram_size = pres->end - pres->start + 1; + card->dpram = ioremap_nocache(card->dpram_phys, card->dpram_size); + if (!card->dpram) { + dev_alert(&card->pdev->dev, "dpram ioremap failed\n"); + goto ioremap_failed; + } + + pres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (pres) + card->irq.nr = pres->start; + + /* reset card */ + ret = softing_card_boot(card); + if (ret < 0) { + dev_alert(&pdev->dev, "failed to boot\n"); + goto boot_failed; + } + + /* only now, the chip's are known */ + card->id.freq = card->pdat->freq; + + ret = sysfs_create_group(&pdev->dev.kobj, &softing_pdev_group); + if (ret < 0) { + dev_alert(&card->pdev->dev, "sysfs failed\n"); + goto sysfs_failed; + } + + ret = -ENOMEM; + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + card->net[j] = netdev = + softing_netdev_create(card, card->id.chip[j]); + if (!netdev) { + dev_alert(&pdev->dev, "failed to make can[%i]", j); + goto netdev_failed; + } + priv = netdev_priv(card->net[j]); + priv->index = j; + ret = softing_netdev_register(netdev); + if (ret) { + free_candev(netdev); + card->net[j] = NULL; + dev_alert(&card->pdev->dev, + "failed to register can[%i]\n", j); + goto netdev_failed; + } + } + dev_info(&card->pdev->dev, "%s ready.\n", card->pdat->name); + return 0; + +netdev_failed: + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (!card->net[j]) + continue; + softing_netdev_cleanup(card->net[j]); + } + sysfs_remove_group(&pdev->dev.kobj, &softing_pdev_group); +sysfs_failed: + softing_card_shutdown(card); +boot_failed: + iounmap(card->dpram); +ioremap_failed: +platform_resource_failed: + kfree(card); + return ret; +} + +static struct platform_driver softing_driver = { + .driver = { + .name = "softing", + .owner = THIS_MODULE, + }, + .probe = softing_pdev_probe, + .remove = __devexit_p(softing_pdev_remove), +}; + +MODULE_ALIAS("platform:softing"); + +static int __init softing_start(void) +{ + return platform_driver_register(&softing_driver); +} + +static void __exit softing_stop(void) +{ + platform_driver_unregister(&softing_driver); +} + +module_init(softing_start); +module_exit(softing_stop); + +MODULE_DESCRIPTION("Softing DPRAM CAN driver"); +MODULE_AUTHOR("Kurt Van Dijck <kurt.van.dijck@eia.be>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/can/softing/softing_platform.h b/drivers/net/can/softing/softing_platform.h new file mode 100644 index 000000000000..ebbf69815623 --- /dev/null +++ b/drivers/net/can/softing/softing_platform.h @@ -0,0 +1,40 @@ + +#include <linux/platform_device.h> + +#ifndef _SOFTING_DEVICE_H_ +#define _SOFTING_DEVICE_H_ + +/* softing firmware directory prefix */ +#define fw_dir "softing-4.6/" + +struct softing_platform_data { + unsigned int manf; + unsigned int prod; + /* + * generation + * 1st with NEC or SJA1000 + * 8bit, exclusive interrupt, ... + * 2nd only SJA1000 + * 16bit, shared interrupt + */ + int generation; + int nbus; /* # busses on device */ + unsigned int freq; /* operating frequency in Hz */ + unsigned int max_brp; + unsigned int max_sjw; + unsigned long dpram_size; + const char *name; + struct { + unsigned long offs; + unsigned long addr; + const char *fw; + } boot, load, app; + /* + * reset() function + * bring pdev in or out of reset, depending on value + */ + int (*reset)(struct platform_device *pdev, int value); + int (*enable_irq)(struct platform_device *pdev, int value); +}; + +#endif |