summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/bcm_sf2.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/bcm_sf2.c')
-rw-r--r--drivers/net/dsa/bcm_sf2.c701
1 files changed, 512 insertions, 189 deletions
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 10ddd5a5dfb6..cd1d630ae3a9 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -22,6 +22,7 @@
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
+#include <linux/of_mdio.h>
#include <net/dsa.h>
#include <linux/ethtool.h>
#include <linux/if_bridge.h>
@@ -460,19 +461,13 @@ static int bcm_sf2_sw_set_eee(struct dsa_switch *ds, int port,
return 0;
}
-/* Fast-ageing of ARL entries for a given port, equivalent to an ARL
- * flush for that port.
- */
-static int bcm_sf2_sw_fast_age_port(struct dsa_switch *ds, int port)
+static int bcm_sf2_fast_age_op(struct bcm_sf2_priv *priv)
{
- struct bcm_sf2_priv *priv = ds_to_priv(ds);
unsigned int timeout = 1000;
u32 reg;
- core_writel(priv, port, CORE_FAST_AGE_PORT);
-
reg = core_readl(priv, CORE_FAST_AGE_CTRL);
- reg |= EN_AGE_PORT | EN_AGE_DYNAMIC | FAST_AGE_STR_DONE;
+ reg |= EN_AGE_PORT | EN_AGE_VLAN | EN_AGE_DYNAMIC | FAST_AGE_STR_DONE;
core_writel(priv, reg, CORE_FAST_AGE_CTRL);
do {
@@ -491,13 +486,98 @@ static int bcm_sf2_sw_fast_age_port(struct dsa_switch *ds, int port)
return 0;
}
+/* Fast-ageing of ARL entries for a given port, equivalent to an ARL
+ * flush for that port.
+ */
+static int bcm_sf2_sw_fast_age_port(struct dsa_switch *ds, int port)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+
+ core_writel(priv, port, CORE_FAST_AGE_PORT);
+
+ return bcm_sf2_fast_age_op(priv);
+}
+
+static int bcm_sf2_sw_fast_age_vlan(struct bcm_sf2_priv *priv, u16 vid)
+{
+ core_writel(priv, vid, CORE_FAST_AGE_VID);
+
+ return bcm_sf2_fast_age_op(priv);
+}
+
+static int bcm_sf2_vlan_op_wait(struct bcm_sf2_priv *priv)
+{
+ unsigned int timeout = 10;
+ u32 reg;
+
+ do {
+ reg = core_readl(priv, CORE_ARLA_VTBL_RWCTRL);
+ if (!(reg & ARLA_VTBL_STDN))
+ return 0;
+
+ usleep_range(1000, 2000);
+ } while (timeout--);
+
+ return -ETIMEDOUT;
+}
+
+static int bcm_sf2_vlan_op(struct bcm_sf2_priv *priv, u8 op)
+{
+ core_writel(priv, ARLA_VTBL_STDN | op, CORE_ARLA_VTBL_RWCTRL);
+
+ return bcm_sf2_vlan_op_wait(priv);
+}
+
+static void bcm_sf2_set_vlan_entry(struct bcm_sf2_priv *priv, u16 vid,
+ struct bcm_sf2_vlan *vlan)
+{
+ int ret;
+
+ core_writel(priv, vid & VTBL_ADDR_INDEX_MASK, CORE_ARLA_VTBL_ADDR);
+ core_writel(priv, vlan->untag << UNTAG_MAP_SHIFT | vlan->members,
+ CORE_ARLA_VTBL_ENTRY);
+
+ ret = bcm_sf2_vlan_op(priv, ARLA_VTBL_CMD_WRITE);
+ if (ret)
+ pr_err("failed to write VLAN entry\n");
+}
+
+static int bcm_sf2_get_vlan_entry(struct bcm_sf2_priv *priv, u16 vid,
+ struct bcm_sf2_vlan *vlan)
+{
+ u32 entry;
+ int ret;
+
+ core_writel(priv, vid & VTBL_ADDR_INDEX_MASK, CORE_ARLA_VTBL_ADDR);
+
+ ret = bcm_sf2_vlan_op(priv, ARLA_VTBL_CMD_READ);
+ if (ret)
+ return ret;
+
+ entry = core_readl(priv, CORE_ARLA_VTBL_ENTRY);
+ vlan->members = entry & FWD_MAP_MASK;
+ vlan->untag = (entry >> UNTAG_MAP_SHIFT) & UNTAG_MAP_MASK;
+
+ return 0;
+}
+
static int bcm_sf2_sw_br_join(struct dsa_switch *ds, int port,
struct net_device *bridge)
{
struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ s8 cpu_port = ds->dst->cpu_port;
unsigned int i;
u32 reg, p_ctl;
+ /* Make this port leave the all VLANs join since we will have proper
+ * VLAN entries from now on
+ */
+ reg = core_readl(priv, CORE_JOIN_ALL_VLAN_EN);
+ reg &= ~BIT(port);
+ if ((reg & BIT(cpu_port)) == BIT(cpu_port))
+ reg &= ~BIT(cpu_port);
+ core_writel(priv, reg, CORE_JOIN_ALL_VLAN_EN);
+
priv->port_sts[port].bridge_dev = bridge;
p_ctl = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));
@@ -529,6 +609,7 @@ static void bcm_sf2_sw_br_leave(struct dsa_switch *ds, int port)
{
struct bcm_sf2_priv *priv = ds_to_priv(ds);
struct net_device *bridge = priv->port_sts[port].bridge_dev;
+ s8 cpu_port = ds->dst->cpu_port;
unsigned int i;
u32 reg, p_ctl;
@@ -552,6 +633,13 @@ static void bcm_sf2_sw_br_leave(struct dsa_switch *ds, int port)
core_writel(priv, p_ctl, CORE_PORT_VLAN_CTL_PORT(port));
priv->port_sts[port].vlan_ctl_mask = p_ctl;
priv->port_sts[port].bridge_dev = NULL;
+
+ /* Make this port join all VLANs without VLAN entries */
+ reg = core_readl(priv, CORE_JOIN_ALL_VLAN_EN);
+ reg |= BIT(port);
+ if (!(reg & BIT(cpu_port)))
+ reg |= BIT(cpu_port);
+ core_writel(priv, reg, CORE_JOIN_ALL_VLAN_EN);
}
static void bcm_sf2_sw_br_set_stp_state(struct dsa_switch *ds, int port,
@@ -804,7 +892,7 @@ static int bcm_sf2_sw_fdb_dump(struct dsa_switch *ds, int port,
int (*cb)(struct switchdev_obj *obj))
{
struct bcm_sf2_priv *priv = ds_to_priv(ds);
- struct net_device *dev = ds->ports[port];
+ struct net_device *dev = ds->ports[port].netdev;
struct bcm_sf2_arl_entry results[2];
unsigned int count = 0;
int ret;
@@ -836,6 +924,66 @@ static int bcm_sf2_sw_fdb_dump(struct dsa_switch *ds, int port,
return 0;
}
+static int bcm_sf2_sw_indir_rw(struct bcm_sf2_priv *priv, int op, int addr,
+ int regnum, u16 val)
+{
+ int ret = 0;
+ u32 reg;
+
+ reg = reg_readl(priv, REG_SWITCH_CNTRL);
+ reg |= MDIO_MASTER_SEL;
+ reg_writel(priv, reg, REG_SWITCH_CNTRL);
+
+ /* Page << 8 | offset */
+ reg = 0x70;
+ reg <<= 2;
+ core_writel(priv, addr, reg);
+
+ /* Page << 8 | offset */
+ reg = 0x80 << 8 | regnum << 1;
+ reg <<= 2;
+
+ if (op)
+ ret = core_readl(priv, reg);
+ else
+ core_writel(priv, val, reg);
+
+ reg = reg_readl(priv, REG_SWITCH_CNTRL);
+ reg &= ~MDIO_MASTER_SEL;
+ reg_writel(priv, reg, REG_SWITCH_CNTRL);
+
+ return ret & 0xffff;
+}
+
+static int bcm_sf2_sw_mdio_read(struct mii_bus *bus, int addr, int regnum)
+{
+ struct bcm_sf2_priv *priv = bus->priv;
+
+ /* Intercept reads from Broadcom pseudo-PHY address, else, send
+ * them to our master MDIO bus controller
+ */
+ if (addr == BRCM_PSEUDO_PHY_ADDR && priv->indir_phy_mask & BIT(addr))
+ return bcm_sf2_sw_indir_rw(priv, 1, addr, regnum, 0);
+ else
+ return mdiobus_read(priv->master_mii_bus, addr, regnum);
+}
+
+static int bcm_sf2_sw_mdio_write(struct mii_bus *bus, int addr, int regnum,
+ u16 val)
+{
+ struct bcm_sf2_priv *priv = bus->priv;
+
+ /* Intercept writes to the Broadcom pseudo-PHY address, else,
+ * send them to our master MDIO bus controller
+ */
+ if (addr == BRCM_PSEUDO_PHY_ADDR && priv->indir_phy_mask & BIT(addr))
+ bcm_sf2_sw_indir_rw(priv, 0, addr, regnum, val);
+ else
+ mdiobus_write(priv->master_mii_bus, addr, regnum, val);
+
+ return 0;
+}
+
static irqreturn_t bcm_sf2_switch_0_isr(int irq, void *dev_id)
{
struct bcm_sf2_priv *priv = dev_id;
@@ -932,133 +1080,70 @@ static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv,
}
}
-static int bcm_sf2_sw_setup(struct dsa_switch *ds)
+static int bcm_sf2_mdio_register(struct dsa_switch *ds)
{
- const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME;
struct bcm_sf2_priv *priv = ds_to_priv(ds);
struct device_node *dn;
- void __iomem **base;
- unsigned int port;
- unsigned int i;
- u32 reg, rev;
- int ret;
-
- spin_lock_init(&priv->indir_lock);
- mutex_init(&priv->stats_mutex);
-
- /* All the interesting properties are at the parent device_node
- * level
- */
- dn = ds->cd->of_node->parent;
- bcm_sf2_identify_ports(priv, ds->cd->of_node);
-
- priv->irq0 = irq_of_parse_and_map(dn, 0);
- priv->irq1 = irq_of_parse_and_map(dn, 1);
-
- base = &priv->core;
- for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
- *base = of_iomap(dn, i);
- if (*base == NULL) {
- pr_err("unable to find register: %s\n", reg_names[i]);
- ret = -ENOMEM;
- goto out_unmap;
- }
- base++;
- }
-
- ret = bcm_sf2_sw_rst(priv);
- if (ret) {
- pr_err("unable to software reset switch: %d\n", ret);
- goto out_unmap;
- }
-
- /* Disable all interrupts and request them */
- bcm_sf2_intr_disable(priv);
-
- ret = request_irq(priv->irq0, bcm_sf2_switch_0_isr, 0,
- "switch_0", priv);
- if (ret < 0) {
- pr_err("failed to request switch_0 IRQ\n");
- goto out_unmap;
- }
-
- ret = request_irq(priv->irq1, bcm_sf2_switch_1_isr, 0,
- "switch_1", priv);
- if (ret < 0) {
- pr_err("failed to request switch_1 IRQ\n");
- goto out_free_irq0;
- }
-
- /* Reset the MIB counters */
- reg = core_readl(priv, CORE_GMNCFGCFG);
- reg |= RST_MIB_CNT;
- core_writel(priv, reg, CORE_GMNCFGCFG);
- reg &= ~RST_MIB_CNT;
- core_writel(priv, reg, CORE_GMNCFGCFG);
-
- /* Get the maximum number of ports for this switch */
- priv->hw_params.num_ports = core_readl(priv, CORE_IMP0_PRT_ID) + 1;
- if (priv->hw_params.num_ports > DSA_MAX_PORTS)
- priv->hw_params.num_ports = DSA_MAX_PORTS;
-
- /* Assume a single GPHY setup if we can't read that property */
- if (of_property_read_u32(dn, "brcm,num-gphy",
- &priv->hw_params.num_gphy))
- priv->hw_params.num_gphy = 1;
-
- /* Enable all valid ports and disable those unused */
- for (port = 0; port < priv->hw_params.num_ports; port++) {
- /* IMP port receives special treatment */
- if ((1 << port) & ds->enabled_port_mask)
- bcm_sf2_port_setup(ds, port, NULL);
- else if (dsa_is_cpu_port(ds, port))
- bcm_sf2_imp_setup(ds, port);
- else
- bcm_sf2_port_disable(ds, port, NULL);
- }
-
- /* Include the pseudo-PHY address and the broadcast PHY address to
- * divert reads towards our workaround. This is only required for
- * 7445D0, since 7445E0 disconnects the internal switch pseudo-PHY such
- * that we can use the regular SWITCH_MDIO master controller instead.
+ static int index;
+ int err;
+
+ /* Find our integrated MDIO bus node */
+ dn = of_find_compatible_node(NULL, NULL, "brcm,unimac-mdio");
+ priv->master_mii_bus = of_mdio_find_bus(dn);
+ if (!priv->master_mii_bus)
+ return -EPROBE_DEFER;
+
+ get_device(&priv->master_mii_bus->dev);
+ priv->master_mii_dn = dn;
+
+ priv->slave_mii_bus = devm_mdiobus_alloc(ds->dev);
+ if (!priv->slave_mii_bus)
+ return -ENOMEM;
+
+ priv->slave_mii_bus->priv = priv;
+ priv->slave_mii_bus->name = "sf2 slave mii";
+ priv->slave_mii_bus->read = bcm_sf2_sw_mdio_read;
+ priv->slave_mii_bus->write = bcm_sf2_sw_mdio_write;
+ snprintf(priv->slave_mii_bus->id, MII_BUS_ID_SIZE, "sf2-%d",
+ index++);
+ priv->slave_mii_bus->dev.of_node = dn;
+
+ /* Include the pseudo-PHY address to divert reads towards our
+ * workaround. This is only required for 7445D0, since 7445E0
+ * disconnects the internal switch pseudo-PHY such that we can use the
+ * regular SWITCH_MDIO master controller instead.
*
- * By default, DSA initializes ds->phys_mii_mask to
- * ds->enabled_port_mask to have a 1:1 mapping between Port address
- * and PHY address in order to utilize the slave_mii_bus instance to
- * read from Port PHYs. This is not what we want here, so we
- * initialize phys_mii_mask 0 to always utilize the "master" MDIO
- * bus backed by the "mdio-unimac" driver.
+ * Here we flag the pseudo PHY as needing special treatment and would
+ * otherwise make all other PHY read/writes go to the master MDIO bus
+ * controller that comes with this switch backed by the "mdio-unimac"
+ * driver.
*/
if (of_machine_is_compatible("brcm,bcm7445d0"))
- ds->phys_mii_mask |= ((1 << BRCM_PSEUDO_PHY_ADDR) | (1 << 0));
+ priv->indir_phy_mask |= (1 << BRCM_PSEUDO_PHY_ADDR);
else
- ds->phys_mii_mask = 0;
+ priv->indir_phy_mask = 0;
- rev = reg_readl(priv, REG_SWITCH_REVISION);
- priv->hw_params.top_rev = (rev >> SWITCH_TOP_REV_SHIFT) &
- SWITCH_TOP_REV_MASK;
- priv->hw_params.core_rev = (rev & SF2_REV_MASK);
+ ds->phys_mii_mask = priv->indir_phy_mask;
+ ds->slave_mii_bus = priv->slave_mii_bus;
+ priv->slave_mii_bus->parent = ds->dev->parent;
+ priv->slave_mii_bus->phy_mask = ~priv->indir_phy_mask;
- rev = reg_readl(priv, REG_PHY_REVISION);
- priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
+ if (dn)
+ err = of_mdiobus_register(priv->slave_mii_bus, dn);
+ else
+ err = mdiobus_register(priv->slave_mii_bus);
- pr_info("Starfighter 2 top: %x.%02x, core: %x.%02x base: 0x%p, IRQs: %d, %d\n",
- priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff,
- priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
- priv->core, priv->irq0, priv->irq1);
+ if (err)
+ of_node_put(dn);
- return 0;
+ return err;
+}
-out_free_irq0:
- free_irq(priv->irq0, priv);
-out_unmap:
- base = &priv->core;
- for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
- if (*base)
- iounmap(*base);
- base++;
- }
- return ret;
+static void bcm_sf2_mdio_unregister(struct bcm_sf2_priv *priv)
+{
+ mdiobus_unregister(priv->slave_mii_bus);
+ if (priv->master_mii_dn)
+ of_node_put(priv->master_mii_dn);
}
static int bcm_sf2_sw_set_addr(struct dsa_switch *ds, u8 *addr)
@@ -1078,68 +1163,6 @@ static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
return priv->hw_params.gphy_rev;
}
-static int bcm_sf2_sw_indir_rw(struct dsa_switch *ds, int op, int addr,
- int regnum, u16 val)
-{
- struct bcm_sf2_priv *priv = ds_to_priv(ds);
- int ret = 0;
- u32 reg;
-
- reg = reg_readl(priv, REG_SWITCH_CNTRL);
- reg |= MDIO_MASTER_SEL;
- reg_writel(priv, reg, REG_SWITCH_CNTRL);
-
- /* Page << 8 | offset */
- reg = 0x70;
- reg <<= 2;
- core_writel(priv, addr, reg);
-
- /* Page << 8 | offset */
- reg = 0x80 << 8 | regnum << 1;
- reg <<= 2;
-
- if (op)
- ret = core_readl(priv, reg);
- else
- core_writel(priv, val, reg);
-
- reg = reg_readl(priv, REG_SWITCH_CNTRL);
- reg &= ~MDIO_MASTER_SEL;
- reg_writel(priv, reg, REG_SWITCH_CNTRL);
-
- return ret & 0xffff;
-}
-
-static int bcm_sf2_sw_phy_read(struct dsa_switch *ds, int addr, int regnum)
-{
- /* Intercept reads from the MDIO broadcast address or Broadcom
- * pseudo-PHY address
- */
- switch (addr) {
- case 0:
- case BRCM_PSEUDO_PHY_ADDR:
- return bcm_sf2_sw_indir_rw(ds, 1, addr, regnum, 0);
- default:
- return 0xffff;
- }
-}
-
-static int bcm_sf2_sw_phy_write(struct dsa_switch *ds, int addr, int regnum,
- u16 val)
-{
- /* Intercept writes to the MDIO broadcast address or Broadcom
- * pseudo-PHY address
- */
- switch (addr) {
- case 0:
- case BRCM_PSEUDO_PHY_ADDR:
- bcm_sf2_sw_indir_rw(ds, 0, addr, regnum, val);
- break;
- }
-
- return 0;
-}
-
static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
struct phy_device *phydev)
{
@@ -1248,7 +1271,7 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
* state machine and make it go in PHY_FORCING state instead.
*/
if (!status->link)
- netif_carrier_off(ds->ports[port]);
+ netif_carrier_off(ds->ports[port].netdev);
status->duplex = 1;
} else {
status->link = 1;
@@ -1370,14 +1393,309 @@ static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
return p->ethtool_ops->set_wol(p, wol);
}
+static void bcm_sf2_enable_vlan(struct bcm_sf2_priv *priv, bool enable)
+{
+ u32 mgmt, vc0, vc1, vc4, vc5;
+
+ mgmt = core_readl(priv, CORE_SWMODE);
+ vc0 = core_readl(priv, CORE_VLAN_CTRL0);
+ vc1 = core_readl(priv, CORE_VLAN_CTRL1);
+ vc4 = core_readl(priv, CORE_VLAN_CTRL4);
+ vc5 = core_readl(priv, CORE_VLAN_CTRL5);
+
+ mgmt &= ~SW_FWDG_MODE;
+
+ if (enable) {
+ vc0 |= VLAN_EN | VLAN_LEARN_MODE_IVL;
+ vc1 |= EN_RSV_MCAST_UNTAG | EN_RSV_MCAST_FWDMAP;
+ vc4 &= ~(INGR_VID_CHK_MASK << INGR_VID_CHK_SHIFT);
+ vc4 |= INGR_VID_CHK_DROP;
+ vc5 |= DROP_VTABLE_MISS | EN_VID_FFF_FWD;
+ } else {
+ vc0 &= ~(VLAN_EN | VLAN_LEARN_MODE_IVL);
+ vc1 &= ~(EN_RSV_MCAST_UNTAG | EN_RSV_MCAST_FWDMAP);
+ vc4 &= ~(INGR_VID_CHK_MASK << INGR_VID_CHK_SHIFT);
+ vc5 &= ~(DROP_VTABLE_MISS | EN_VID_FFF_FWD);
+ vc4 |= INGR_VID_CHK_VID_VIOL_IMP;
+ }
+
+ core_writel(priv, vc0, CORE_VLAN_CTRL0);
+ core_writel(priv, vc1, CORE_VLAN_CTRL1);
+ core_writel(priv, 0, CORE_VLAN_CTRL3);
+ core_writel(priv, vc4, CORE_VLAN_CTRL4);
+ core_writel(priv, vc5, CORE_VLAN_CTRL5);
+ core_writel(priv, mgmt, CORE_SWMODE);
+}
+
+static void bcm_sf2_sw_configure_vlan(struct dsa_switch *ds)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ unsigned int port;
+
+ /* Clear all VLANs */
+ bcm_sf2_vlan_op(priv, ARLA_VTBL_CMD_CLEAR);
+
+ for (port = 0; port < priv->hw_params.num_ports; port++) {
+ if (!((1 << port) & ds->enabled_port_mask))
+ continue;
+
+ core_writel(priv, 1, CORE_DEFAULT_1Q_TAG_P(port));
+ }
+}
+
+static int bcm_sf2_sw_vlan_filtering(struct dsa_switch *ds, int port,
+ bool vlan_filtering)
+{
+ return 0;
+}
+
+static int bcm_sf2_sw_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct switchdev_trans *trans)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+
+ bcm_sf2_enable_vlan(priv, true);
+
+ return 0;
+}
+
+static void bcm_sf2_sw_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct switchdev_trans *trans)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+ s8 cpu_port = ds->dst->cpu_port;
+ struct bcm_sf2_vlan *vl;
+ u16 vid;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
+ vl = &priv->vlans[vid];
+
+ bcm_sf2_get_vlan_entry(priv, vid, vl);
+
+ vl->members |= BIT(port) | BIT(cpu_port);
+ if (untagged)
+ vl->untag |= BIT(port) | BIT(cpu_port);
+ else
+ vl->untag &= ~(BIT(port) | BIT(cpu_port));
+
+ bcm_sf2_set_vlan_entry(priv, vid, vl);
+ bcm_sf2_sw_fast_age_vlan(priv, vid);
+ }
+
+ if (pvid) {
+ core_writel(priv, vlan->vid_end, CORE_DEFAULT_1Q_TAG_P(port));
+ core_writel(priv, vlan->vid_end,
+ CORE_DEFAULT_1Q_TAG_P(cpu_port));
+ bcm_sf2_sw_fast_age_vlan(priv, vid);
+ }
+}
+
+static int bcm_sf2_sw_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ s8 cpu_port = ds->dst->cpu_port;
+ struct bcm_sf2_vlan *vl;
+ u16 vid, pvid;
+ int ret;
+
+ pvid = core_readl(priv, CORE_DEFAULT_1Q_TAG_P(port));
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
+ vl = &priv->vlans[vid];
+
+ ret = bcm_sf2_get_vlan_entry(priv, vid, vl);
+ if (ret)
+ return ret;
+
+ vl->members &= ~BIT(port);
+ if ((vl->members & BIT(cpu_port)) == BIT(cpu_port))
+ vl->members = 0;
+ if (pvid == vid)
+ pvid = 0;
+ if (untagged) {
+ vl->untag &= ~BIT(port);
+ if ((vl->untag & BIT(port)) == BIT(cpu_port))
+ vl->untag = 0;
+ }
+
+ bcm_sf2_set_vlan_entry(priv, vid, vl);
+ bcm_sf2_sw_fast_age_vlan(priv, vid);
+ }
+
+ core_writel(priv, pvid, CORE_DEFAULT_1Q_TAG_P(port));
+ core_writel(priv, pvid, CORE_DEFAULT_1Q_TAG_P(cpu_port));
+ bcm_sf2_sw_fast_age_vlan(priv, vid);
+
+ return 0;
+}
+
+static int bcm_sf2_sw_vlan_dump(struct dsa_switch *ds, int port,
+ struct switchdev_obj_port_vlan *vlan,
+ int (*cb)(struct switchdev_obj *obj))
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ struct bcm_sf2_port_status *p = &priv->port_sts[port];
+ struct bcm_sf2_vlan *vl;
+ u16 vid, pvid;
+ int err = 0;
+
+ pvid = core_readl(priv, CORE_DEFAULT_1Q_TAG_P(port));
+
+ for (vid = 0; vid < VLAN_N_VID; vid++) {
+ vl = &priv->vlans[vid];
+
+ if (!(vl->members & BIT(port)))
+ continue;
+
+ vlan->vid_begin = vlan->vid_end = vid;
+ vlan->flags = 0;
+
+ if (vl->untag & BIT(port))
+ vlan->flags |= BRIDGE_VLAN_INFO_UNTAGGED;
+ if (p->pvid == vid)
+ vlan->flags |= BRIDGE_VLAN_INFO_PVID;
+
+ err = cb(&vlan->obj);
+ if (err)
+ break;
+ }
+
+ return err;
+}
+
+static int bcm_sf2_sw_setup(struct dsa_switch *ds)
+{
+ const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME;
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ struct device_node *dn;
+ void __iomem **base;
+ unsigned int port;
+ unsigned int i;
+ u32 reg, rev;
+ int ret;
+
+ spin_lock_init(&priv->indir_lock);
+ mutex_init(&priv->stats_mutex);
+
+ /* All the interesting properties are at the parent device_node
+ * level
+ */
+ dn = ds->cd->of_node->parent;
+ bcm_sf2_identify_ports(priv, ds->cd->of_node);
+
+ priv->irq0 = irq_of_parse_and_map(dn, 0);
+ priv->irq1 = irq_of_parse_and_map(dn, 1);
+
+ base = &priv->core;
+ for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
+ *base = of_iomap(dn, i);
+ if (*base == NULL) {
+ pr_err("unable to find register: %s\n", reg_names[i]);
+ ret = -ENOMEM;
+ goto out_unmap;
+ }
+ base++;
+ }
+
+ ret = bcm_sf2_sw_rst(priv);
+ if (ret) {
+ pr_err("unable to software reset switch: %d\n", ret);
+ goto out_unmap;
+ }
+
+ ret = bcm_sf2_mdio_register(ds);
+ if (ret) {
+ pr_err("failed to register MDIO bus\n");
+ goto out_unmap;
+ }
+
+ /* Disable all interrupts and request them */
+ bcm_sf2_intr_disable(priv);
+
+ ret = request_irq(priv->irq0, bcm_sf2_switch_0_isr, 0,
+ "switch_0", priv);
+ if (ret < 0) {
+ pr_err("failed to request switch_0 IRQ\n");
+ goto out_unmap;
+ }
+
+ ret = request_irq(priv->irq1, bcm_sf2_switch_1_isr, 0,
+ "switch_1", priv);
+ if (ret < 0) {
+ pr_err("failed to request switch_1 IRQ\n");
+ goto out_free_irq0;
+ }
+
+ /* Reset the MIB counters */
+ reg = core_readl(priv, CORE_GMNCFGCFG);
+ reg |= RST_MIB_CNT;
+ core_writel(priv, reg, CORE_GMNCFGCFG);
+ reg &= ~RST_MIB_CNT;
+ core_writel(priv, reg, CORE_GMNCFGCFG);
+
+ /* Get the maximum number of ports for this switch */
+ priv->hw_params.num_ports = core_readl(priv, CORE_IMP0_PRT_ID) + 1;
+ if (priv->hw_params.num_ports > DSA_MAX_PORTS)
+ priv->hw_params.num_ports = DSA_MAX_PORTS;
+
+ /* Assume a single GPHY setup if we can't read that property */
+ if (of_property_read_u32(dn, "brcm,num-gphy",
+ &priv->hw_params.num_gphy))
+ priv->hw_params.num_gphy = 1;
+
+ /* Enable all valid ports and disable those unused */
+ for (port = 0; port < priv->hw_params.num_ports; port++) {
+ /* IMP port receives special treatment */
+ if ((1 << port) & ds->enabled_port_mask)
+ bcm_sf2_port_setup(ds, port, NULL);
+ else if (dsa_is_cpu_port(ds, port))
+ bcm_sf2_imp_setup(ds, port);
+ else
+ bcm_sf2_port_disable(ds, port, NULL);
+ }
+
+ bcm_sf2_sw_configure_vlan(ds);
+
+ rev = reg_readl(priv, REG_SWITCH_REVISION);
+ priv->hw_params.top_rev = (rev >> SWITCH_TOP_REV_SHIFT) &
+ SWITCH_TOP_REV_MASK;
+ priv->hw_params.core_rev = (rev & SF2_REV_MASK);
+
+ rev = reg_readl(priv, REG_PHY_REVISION);
+ priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
+
+ pr_info("Starfighter 2 top: %x.%02x, core: %x.%02x base: 0x%p, IRQs: %d, %d\n",
+ priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff,
+ priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
+ priv->core, priv->irq0, priv->irq1);
+
+ return 0;
+
+out_free_irq0:
+ free_irq(priv->irq0, priv);
+out_unmap:
+ base = &priv->core;
+ for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
+ if (*base)
+ iounmap(*base);
+ base++;
+ }
+ bcm_sf2_mdio_unregister(priv);
+ return ret;
+}
+
static struct dsa_switch_driver bcm_sf2_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_BRCM,
.probe = bcm_sf2_sw_drv_probe,
.setup = bcm_sf2_sw_setup,
.set_addr = bcm_sf2_sw_set_addr,
.get_phy_flags = bcm_sf2_sw_get_phy_flags,
- .phy_read = bcm_sf2_sw_phy_read,
- .phy_write = bcm_sf2_sw_phy_write,
.get_strings = bcm_sf2_sw_get_strings,
.get_ethtool_stats = bcm_sf2_sw_get_ethtool_stats,
.get_sset_count = bcm_sf2_sw_get_sset_count,
@@ -1398,6 +1716,11 @@ static struct dsa_switch_driver bcm_sf2_switch_driver = {
.port_fdb_add = bcm_sf2_sw_fdb_add,
.port_fdb_del = bcm_sf2_sw_fdb_del,
.port_fdb_dump = bcm_sf2_sw_fdb_dump,
+ .port_vlan_filtering = bcm_sf2_sw_vlan_filtering,
+ .port_vlan_prepare = bcm_sf2_sw_vlan_prepare,
+ .port_vlan_add = bcm_sf2_sw_vlan_add,
+ .port_vlan_del = bcm_sf2_sw_vlan_del,
+ .port_vlan_dump = bcm_sf2_sw_vlan_dump,
};
static int __init bcm_sf2_init(void)