diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz8863_smi.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz8863_smi.c | 213 |
1 files changed, 213 insertions, 0 deletions
diff --git a/drivers/net/dsa/microchip/ksz8863_smi.c b/drivers/net/dsa/microchip/ksz8863_smi.c new file mode 100644 index 000000000000..30d97ea7a949 --- /dev/null +++ b/drivers/net/dsa/microchip/ksz8863_smi.c @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Microchip KSZ8863 series register access through SMI + * + * Copyright (C) 2019 Pengutronix, Michael Grzeschik <kernel@pengutronix.de> + */ + +#include "ksz8.h" +#include "ksz_common.h" + +/* Serial Management Interface (SMI) uses the following frame format: + * + * preamble|start|Read/Write| PHY | REG |TA| Data bits | Idle + * |frame| OP code |address |address| | | + * read | 32x1´s | 01 | 00 | 1xRRR | RRRRR |Z0| 00000000DDDDDDDD | Z + * write| 32x1´s | 01 | 00 | 0xRRR | RRRRR |10| xxxxxxxxDDDDDDDD | Z + * + */ + +#define SMI_KSZ88XX_READ_PHY BIT(4) + +static int ksz8863_mdio_read(void *ctx, const void *reg_buf, size_t reg_len, + void *val_buf, size_t val_len) +{ + struct ksz_device *dev = ctx; + struct mdio_device *mdev; + u8 reg = *(u8 *)reg_buf; + u8 *val = val_buf; + struct ksz8 *ksz8; + int i, ret = 0; + + ksz8 = dev->priv; + mdev = ksz8->priv; + + mutex_lock_nested(&mdev->bus->mdio_lock, MDIO_MUTEX_NESTED); + for (i = 0; i < val_len; i++) { + int tmp = reg + i; + + ret = __mdiobus_read(mdev->bus, ((tmp & 0xE0) >> 5) | + SMI_KSZ88XX_READ_PHY, tmp); + if (ret < 0) + goto out; + + val[i] = ret; + } + ret = 0; + + out: + mutex_unlock(&mdev->bus->mdio_lock); + + return ret; +} + +static int ksz8863_mdio_write(void *ctx, const void *data, size_t count) +{ + struct ksz_device *dev = ctx; + struct mdio_device *mdev; + struct ksz8 *ksz8; + int i, ret = 0; + u32 reg; + u8 *val; + + ksz8 = dev->priv; + mdev = ksz8->priv; + + val = (u8 *)(data + 4); + reg = *(u32 *)data; + + mutex_lock_nested(&mdev->bus->mdio_lock, MDIO_MUTEX_NESTED); + for (i = 0; i < (count - 4); i++) { + int tmp = reg + i; + + ret = __mdiobus_write(mdev->bus, ((tmp & 0xE0) >> 5), + tmp, val[i]); + if (ret < 0) + goto out; + } + + out: + mutex_unlock(&mdev->bus->mdio_lock); + + return ret; +} + +static const struct regmap_bus regmap_smi[] = { + { + .read = ksz8863_mdio_read, + .write = ksz8863_mdio_write, + .max_raw_read = 1, + .max_raw_write = 1, + }, + { + .read = ksz8863_mdio_read, + .write = ksz8863_mdio_write, + .val_format_endian_default = REGMAP_ENDIAN_BIG, + .max_raw_read = 2, + .max_raw_write = 2, + }, + { + .read = ksz8863_mdio_read, + .write = ksz8863_mdio_write, + .val_format_endian_default = REGMAP_ENDIAN_BIG, + .max_raw_read = 4, + .max_raw_write = 4, + } +}; + +static const struct regmap_config ksz8863_regmap_config[] = { + { + .name = "#8", + .reg_bits = 8, + .pad_bits = 24, + .val_bits = 8, + .cache_type = REGCACHE_NONE, + .use_single_read = 1, + .lock = ksz_regmap_lock, + .unlock = ksz_regmap_unlock, + }, + { + .name = "#16", + .reg_bits = 8, + .pad_bits = 24, + .val_bits = 16, + .cache_type = REGCACHE_NONE, + .use_single_read = 1, + .lock = ksz_regmap_lock, + .unlock = ksz_regmap_unlock, + }, + { + .name = "#32", + .reg_bits = 8, + .pad_bits = 24, + .val_bits = 32, + .cache_type = REGCACHE_NONE, + .use_single_read = 1, + .lock = ksz_regmap_lock, + .unlock = ksz_regmap_unlock, + } +}; + +static int ksz8863_smi_probe(struct mdio_device *mdiodev) +{ + struct regmap_config rc; + struct ksz_device *dev; + struct ksz8 *ksz8; + int ret; + int i; + + ksz8 = devm_kzalloc(&mdiodev->dev, sizeof(struct ksz8), GFP_KERNEL); + ksz8->priv = mdiodev; + + dev = ksz_switch_alloc(&mdiodev->dev, ksz8); + if (!dev) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(ksz8863_regmap_config); i++) { + rc = ksz8863_regmap_config[i]; + rc.lock_arg = &dev->regmap_mutex; + dev->regmap[i] = devm_regmap_init(&mdiodev->dev, + ®map_smi[i], dev, + &rc); + if (IS_ERR(dev->regmap[i])) { + ret = PTR_ERR(dev->regmap[i]); + dev_err(&mdiodev->dev, + "Failed to initialize regmap%i: %d\n", + ksz8863_regmap_config[i].val_bits, ret); + return ret; + } + } + + if (mdiodev->dev.platform_data) + dev->pdata = mdiodev->dev.platform_data; + + ret = ksz8_switch_register(dev); + + /* Main DSA driver may not be started yet. */ + if (ret) + return ret; + + dev_set_drvdata(&mdiodev->dev, dev); + + return 0; +} + +static void ksz8863_smi_remove(struct mdio_device *mdiodev) +{ + struct ksz_device *dev = dev_get_drvdata(&mdiodev->dev); + + if (dev) + ksz_switch_remove(dev); +} + +static const struct of_device_id ksz8863_dt_ids[] = { + { .compatible = "microchip,ksz8863" }, + { .compatible = "microchip,ksz8873" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ksz8863_dt_ids); + +static struct mdio_driver ksz8863_driver = { + .probe = ksz8863_smi_probe, + .remove = ksz8863_smi_remove, + .mdiodrv.driver = { + .name = "ksz8863-switch", + .of_match_table = ksz8863_dt_ids, + }, +}; + +mdio_module_driver(ksz8863_driver); + +MODULE_AUTHOR("Michael Grzeschik <m.grzeschik@pengutronix.de>"); +MODULE_DESCRIPTION("Microchip KSZ8863 SMI Switch driver"); +MODULE_LICENSE("GPL v2"); |