diff options
Diffstat (limited to 'drivers/net/e1000e/netdev.c')
| -rw-r--r-- | drivers/net/e1000e/netdev.c | 20 |
1 files changed, 15 insertions, 5 deletions
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 57a7e41da69e..513a4b8e89c4 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -774,6 +774,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, if (*work_done >= work_to_do) break; (*work_done)++; + rmb(); /* read descriptor and rx_buffer_info after status DD */ status = rx_desc->status; skb = buffer_info->skb; @@ -984,6 +985,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && (count < tx_ring->count)) { bool cleaned = false; + rmb(); /* read buffer_info after eop_desc */ for (; !cleaned; count++) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; @@ -1080,6 +1082,7 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, break; (*work_done)++; skb = buffer_info->skb; + rmb(); /* read descriptor and rx_buffer_info after status DD */ /* in the packet split case this is header only */ prefetch(skb->data - NET_IP_ALIGN); @@ -1279,6 +1282,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, if (*work_done >= work_to_do) break; (*work_done)++; + rmb(); /* read descriptor and rx_buffer_info after status DD */ status = rx_desc->status; skb = buffer_info->skb; @@ -3419,13 +3423,18 @@ static int e1000_test_msi(struct e1000_adapter *adapter) /* disable SERR in case the MSI write causes a master abort */ pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd); - pci_write_config_word(adapter->pdev, PCI_COMMAND, - pci_cmd & ~PCI_COMMAND_SERR); + if (pci_cmd & PCI_COMMAND_SERR) + pci_write_config_word(adapter->pdev, PCI_COMMAND, + pci_cmd & ~PCI_COMMAND_SERR); err = e1000_test_msi_interrupt(adapter); - /* restore previous setting of command word */ - pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd); + /* re-enable SERR */ + if (pci_cmd & PCI_COMMAND_SERR) { + pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd); + pci_cmd |= PCI_COMMAND_SERR; + pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd); + } /* success ! */ if (!err) @@ -5669,7 +5678,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* APME bit in EEPROM is mapped to WUC.APME */ eeprom_data = er32(WUC); eeprom_apme_mask = E1000_WUC_APME; - if (eeprom_data & E1000_WUC_PHY_WAKE) + if ((hw->mac.type > e1000_ich10lan) && + (eeprom_data & E1000_WUC_PHY_WAKE)) adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP; } else if (adapter->flags & FLAG_APME_IN_CTRL3) { if (adapter->flags & FLAG_APME_CHECK_PORT_B && |