summaryrefslogtreecommitdiff
path: root/drivers/net/e1000e/netdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e/netdev.c')
-rw-r--r--drivers/net/e1000e/netdev.c22
1 files changed, 13 insertions, 9 deletions
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 46c5ac6b4d77..e87ed3133528 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2328,8 +2328,11 @@ void e1000e_reset(struct e1000_adapter *adapter)
struct e1000_mac_info *mac = &adapter->hw.mac;
struct e1000_hw *hw = &adapter->hw;
u32 tx_space, min_tx_space, min_rx_space;
+ u32 pba;
u16 hwm;
+ ew32(PBA, adapter->pba);
+
if (mac->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN ) {
/* To maintain wire speed transmits, the Tx FIFO should be
* large enough to accommodate two full transmit packets,
@@ -2337,11 +2340,11 @@ void e1000e_reset(struct e1000_adapter *adapter)
* the Rx FIFO should be large enough to accommodate at least
* one full receive packet and is similarly rounded up and
* expressed in KB. */
- adapter->pba = er32(PBA);
+ pba = er32(PBA);
/* upper 16 bits has Tx packet buffer allocation size in KB */
- tx_space = adapter->pba >> 16;
+ tx_space = pba >> 16;
/* lower 16 bits has Rx packet buffer allocation size in KB */
- adapter->pba &= 0xffff;
+ pba &= 0xffff;
/* the tx fifo also stores 16 bytes of information about the tx
* but don't include ethernet FCS because hardware appends it */
min_tx_space = (mac->max_frame_size +
@@ -2357,20 +2360,21 @@ void e1000e_reset(struct e1000_adapter *adapter)
/* If current Tx allocation is less than the min Tx FIFO size,
* and the min Tx FIFO size is less than the current Rx FIFO
* allocation, take space away from current Rx allocation */
- if (tx_space < min_tx_space &&
- ((min_tx_space - tx_space) < adapter->pba)) {
- adapter->pba -= - (min_tx_space - tx_space);
+ if ((tx_space < min_tx_space) &&
+ ((min_tx_space - tx_space) < pba)) {
+ pba -= min_tx_space - tx_space;
/* if short on rx space, rx wins and must trump tx
* adjustment or use Early Receive if available */
- if ((adapter->pba < min_rx_space) &&
+ if ((pba < min_rx_space) &&
(!(adapter->flags & FLAG_HAS_ERT)))
/* ERT enabled in e1000_configure_rx */
- adapter->pba = min_rx_space;
+ pba = min_rx_space;
}
+
+ ew32(PBA, pba);
}
- ew32(PBA, adapter->pba);
/* flow control settings */
/* The high water mark must be low enough to fit one full frame