summaryrefslogtreecommitdiff
path: root/drivers/net/e1000e/netdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e/netdev.c')
-rw-r--r--drivers/net/e1000e/netdev.c34
1 files changed, 4 insertions, 30 deletions
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index f58f017ee47a..3031d6d16247 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1055,23 +1055,6 @@ static void e1000_release_hw_control(struct e1000_adapter *adapter)
}
}
-static void e1000_release_manageability(struct e1000_adapter *adapter)
-{
- if (adapter->flags & FLAG_MNG_PT_ENABLED) {
- struct e1000_hw *hw = &adapter->hw;
-
- u32 manc = er32(MANC);
-
- /* re-enable hardware interception of ARP */
- manc |= E1000_MANC_ARP_EN;
- manc &= ~E1000_MANC_EN_MNG2HOST;
-
- /* don't explicitly have to mess with MANC2H since
- * MANC has an enable disable that gates MANC2H */
- ew32(MANC, manc);
- }
-}
-
/**
* @e1000_alloc_ring - allocate memory for a ring structure
**/
@@ -1561,9 +1544,6 @@ static void e1000_init_manageability(struct e1000_adapter *adapter)
manc = er32(MANC);
- /* disable hardware interception of ARP */
- manc &= ~(E1000_MANC_ARP_EN);
-
/* enable receiving management packets to the host. this will probably
* generate destination unreachable messages from the host OS, but
* the packets will be handled on SMBUS */
@@ -1690,6 +1670,9 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
else
rctl |= E1000_RCTL_LPE;
+ /* Enable hardware CRC frame stripping */
+ rctl |= E1000_RCTL_SECRC;
+
/* Setup buffer sizes */
rctl &= ~E1000_RCTL_SZ_4096;
rctl |= E1000_RCTL_BSEX;
@@ -1755,9 +1738,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
/* Enable Packet split descriptors */
rctl |= E1000_RCTL_DTYP_PS;
-
- /* Enable hardware CRC frame stripping */
- rctl |= E1000_RCTL_SECRC;
psrctl |= adapter->rx_ps_bsize0 >>
E1000_PSRCTL_BSIZE0_SHIFT;
@@ -2008,7 +1988,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
u16 mii_reg;
/* WoL is enabled */
- if (!adapter->wol)
+ if (adapter->wol)
return;
/* non-copper PHY? */
@@ -2140,8 +2120,6 @@ void e1000e_reset(struct e1000_adapter *adapter)
phy_data &= ~IGP02E1000_PM_SPD;
e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
}
-
- e1000_release_manageability(adapter);
}
int e1000e_up(struct e1000_adapter *adapter)
@@ -3487,8 +3465,6 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
pci_enable_wake(pdev, PCI_D3cold, 0);
}
- e1000_release_manageability(adapter);
-
/* make sure adapter isn't asleep if manageability is enabled */
if (adapter->flags & FLAG_MNG_PT_ENABLED) {
pci_enable_wake(pdev, PCI_D3hot, 1);
@@ -4054,8 +4030,6 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
flush_scheduled_work();
- e1000_release_manageability(adapter);
-
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
e1000_release_hw_control(adapter);