diff options
Diffstat (limited to 'drivers/net/ethernet/8390/ne3210.c')
| -rw-r--r-- | drivers/net/ethernet/8390/ne3210.c | 346 |
1 files changed, 0 insertions, 346 deletions
diff --git a/drivers/net/ethernet/8390/ne3210.c b/drivers/net/ethernet/8390/ne3210.c deleted file mode 100644 index ebcdb52ec739..000000000000 --- a/drivers/net/ethernet/8390/ne3210.c +++ /dev/null @@ -1,346 +0,0 @@ -/* - ne3210.c - - Linux driver for Novell NE3210 EISA Network Adapter - - Copyright (C) 1998, Paul Gortmaker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - Information and Code Sources: - - 1) Based upon my other EISA 8390 drivers (lne390, es3210, smc-ultra32) - 2) The existing myriad of other Linux 8390 drivers by Donald Becker. - 3) Info for getting IRQ and sh-mem gleaned from the EISA cfg file - - The NE3210 is an EISA shared memory NS8390 implementation. Shared - memory address > 1MB should work with this driver. - - Note that the .cfg file (3/11/93, v1.0) has AUI and BNC switched - around (or perhaps there are some defective/backwards cards ???) - - This driver WILL NOT WORK FOR THE NE3200 - it is completely different - and does not use an 8390 at all. - - Updated to EISA probing API 5/2003 by Marc Zyngier. -*/ - -#include <linux/module.h> -#include <linux/eisa.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/mm.h> - -#include <asm/io.h> - -#include "8390.h" - -#define DRV_NAME "ne3210" - -static void ne3210_reset_8390(struct net_device *dev); - -static void ne3210_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page); -static void ne3210_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset); -static void ne3210_block_output(struct net_device *dev, int count, const unsigned char *buf, const int start_page); - -#define NE3210_START_PG 0x00 /* First page of TX buffer */ -#define NE3210_STOP_PG 0x80 /* Last page +1 of RX ring */ - -#define NE3210_IO_EXTENT 0x20 -#define NE3210_SA_PROM 0x16 /* Start of e'net addr. */ -#define NE3210_RESET_PORT 0xc84 -#define NE3210_NIC_OFFSET 0x00 /* Hello, the 8390 is *here* */ - -#define NE3210_ADDR0 0x00 /* 3 byte vendor prefix */ -#define NE3210_ADDR1 0x00 -#define NE3210_ADDR2 0x1b - -#define NE3210_CFG1 0xc84 /* NB: 0xc84 is also "reset" port. */ -#define NE3210_CFG2 0xc90 -#define NE3210_CFG_EXTENT (NE3210_CFG2 - NE3210_CFG1 + 1) - -/* - * You can OR any of the following bits together and assign it - * to NE3210_DEBUG to get verbose driver info during operation. - * Currently only the probe one is implemented. - */ - -#define NE3210_D_PROBE 0x01 -#define NE3210_D_RX_PKT 0x02 -#define NE3210_D_TX_PKT 0x04 -#define NE3210_D_IRQ 0x08 - -#define NE3210_DEBUG 0x0 - -static unsigned char irq_map[] __initdata = {15, 12, 11, 10, 9, 7, 5, 3}; -static unsigned int shmem_map[] __initdata = {0xff0, 0xfe0, 0xfff0, 0xd8, 0xffe0, 0xffc0, 0xd0, 0x0}; -static const char * const ifmap[] __initconst = {"UTP", "?", "BNC", "AUI"}; -static int ifmap_val[] __initdata = { - IF_PORT_10BASET, - IF_PORT_UNKNOWN, - IF_PORT_10BASE2, - IF_PORT_AUI, -}; - -static int __init ne3210_eisa_probe (struct device *device) -{ - unsigned long ioaddr, phys_mem; - int i, retval, port_index; - struct eisa_device *edev = to_eisa_device (device); - struct net_device *dev; - - /* Allocate dev->priv and fill in 8390 specific dev fields. */ - if (!(dev = alloc_ei_netdev ())) { - printk ("ne3210.c: unable to allocate memory for dev!\n"); - return -ENOMEM; - } - - SET_NETDEV_DEV(dev, device); - dev_set_drvdata(device, dev); - ioaddr = edev->base_addr; - - if (!request_region(ioaddr, NE3210_IO_EXTENT, DRV_NAME)) { - retval = -EBUSY; - goto out; - } - - if (!request_region(ioaddr + NE3210_CFG1, - NE3210_CFG_EXTENT, DRV_NAME)) { - retval = -EBUSY; - goto out1; - } - -#if NE3210_DEBUG & NE3210_D_PROBE - printk("ne3210-debug: probe at %#x, ID %s\n", ioaddr, edev->id.sig); - printk("ne3210-debug: config regs: %#x %#x\n", - inb(ioaddr + NE3210_CFG1), inb(ioaddr + NE3210_CFG2)); -#endif - - port_index = inb(ioaddr + NE3210_CFG2) >> 6; - for (i = 0; i < ETH_ALEN; i++) - dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i); - printk("ne3210.c: NE3210 in EISA slot %d, media: %s, addr: %pM.\n", - edev->slot, ifmap[port_index], dev->dev_addr); - - /* Snarf the interrupt now. CFG file has them all listed as `edge' with share=NO */ - dev->irq = irq_map[(inb(ioaddr + NE3210_CFG2) >> 3) & 0x07]; - printk("ne3210.c: using IRQ %d, ", dev->irq); - - retval = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev); - if (retval) { - printk (" unable to get IRQ %d.\n", dev->irq); - goto out2; - } - - phys_mem = shmem_map[inb(ioaddr + NE3210_CFG2) & 0x07] * 0x1000; - - /* - BEWARE!! Some dain-bramaged EISA SCUs will allow you to put - the card mem within the region covered by `normal' RAM !!! - */ - if (phys_mem > 1024*1024) { /* phys addr > 1MB */ - if (phys_mem < virt_to_phys(high_memory)) { - printk(KERN_CRIT "ne3210.c: Card RAM overlaps with normal memory!!!\n"); - printk(KERN_CRIT "ne3210.c: Use EISA SCU to set card memory below 1MB,\n"); - printk(KERN_CRIT "ne3210.c: or to an address above 0x%llx.\n", - (u64)virt_to_phys(high_memory)); - printk(KERN_CRIT "ne3210.c: Driver NOT installed.\n"); - retval = -EINVAL; - goto out3; - } - } - - if (!request_mem_region (phys_mem, NE3210_STOP_PG*0x100, DRV_NAME)) { - printk ("ne3210.c: Unable to request shared memory at physical address %#lx\n", - phys_mem); - goto out3; - } - - printk("%dkB memory at physical address %#lx\n", - NE3210_STOP_PG/4, phys_mem); - - ei_status.mem = ioremap(phys_mem, NE3210_STOP_PG*0x100); - if (!ei_status.mem) { - printk(KERN_ERR "ne3210.c: Unable to remap card memory !!\n"); - printk(KERN_ERR "ne3210.c: Driver NOT installed.\n"); - retval = -EAGAIN; - goto out4; - } - printk("ne3210.c: remapped %dkB card memory to virtual address %p\n", - NE3210_STOP_PG/4, ei_status.mem); - dev->mem_start = (unsigned long)ei_status.mem; - dev->mem_end = dev->mem_start + (NE3210_STOP_PG - NE3210_START_PG)*256; - - /* The 8390 offset is zero for the NE3210 */ - dev->base_addr = ioaddr; - - ei_status.name = "NE3210"; - ei_status.tx_start_page = NE3210_START_PG; - ei_status.rx_start_page = NE3210_START_PG + TX_PAGES; - ei_status.stop_page = NE3210_STOP_PG; - ei_status.word16 = 1; - ei_status.priv = phys_mem; - - if (ei_debug > 0) - printk("ne3210 loaded.\n"); - - ei_status.reset_8390 = &ne3210_reset_8390; - ei_status.block_input = &ne3210_block_input; - ei_status.block_output = &ne3210_block_output; - ei_status.get_8390_hdr = &ne3210_get_8390_hdr; - - dev->netdev_ops = &ei_netdev_ops; - - dev->if_port = ifmap_val[port_index]; - - if ((retval = register_netdev (dev))) - goto out5; - - NS8390_init(dev, 0); - return 0; - - out5: - iounmap(ei_status.mem); - out4: - release_mem_region (phys_mem, NE3210_STOP_PG*0x100); - out3: - free_irq (dev->irq, dev); - out2: - release_region (ioaddr + NE3210_CFG1, NE3210_CFG_EXTENT); - out1: - release_region (ioaddr, NE3210_IO_EXTENT); - out: - free_netdev (dev); - - return retval; -} - -static int ne3210_eisa_remove(struct device *device) -{ - struct net_device *dev = dev_get_drvdata(device); - unsigned long ioaddr = to_eisa_device (device)->base_addr; - - unregister_netdev (dev); - iounmap(ei_status.mem); - release_mem_region (ei_status.priv, NE3210_STOP_PG*0x100); - free_irq (dev->irq, dev); - release_region (ioaddr + NE3210_CFG1, NE3210_CFG_EXTENT); - release_region (ioaddr, NE3210_IO_EXTENT); - free_netdev (dev); - - return 0; -} - -/* - * Reset by toggling the "Board Enable" bits (bit 2 and 0). - */ - -static void ne3210_reset_8390(struct net_device *dev) -{ - unsigned short ioaddr = dev->base_addr; - - outb(0x04, ioaddr + NE3210_RESET_PORT); - if (ei_debug > 1) printk("%s: resetting the NE3210...", dev->name); - - mdelay(2); - - ei_status.txing = 0; - outb(0x01, ioaddr + NE3210_RESET_PORT); - if (ei_debug > 1) printk("reset done\n"); -} - -/* - * Note: In the following three functions is the implicit assumption - * that the associated memcpy will only use "rep; movsl" as long as - * we keep the counts as some multiple of doublewords. This is a - * requirement of the hardware, and also prevents us from using - * eth_io_copy_and_sum() since we can't guarantee it will limit - * itself to doubleword access. - */ - -/* - * Grab the 8390 specific header. Similar to the block_input routine, but - * we don't need to be concerned with ring wrap as the header will be at - * the start of a page, so we optimize accordingly. (A single doubleword.) - */ - -static void -ne3210_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - void __iomem *hdr_start = ei_status.mem + ((ring_page - NE3210_START_PG)<<8); - memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); - hdr->count = (hdr->count + 3) & ~3; /* Round up allocation. */ -} - -/* - * Block input and output are easy on shared memory ethercards, the only - * complication is when the ring buffer wraps. The count will already - * be rounded up to a doubleword value via ne3210_get_8390_hdr() above. - */ - -static void ne3210_block_input(struct net_device *dev, int count, struct sk_buff *skb, - int ring_offset) -{ - void __iomem *start = ei_status.mem + ring_offset - NE3210_START_PG*256; - - if (ring_offset + count > NE3210_STOP_PG*256) { - /* Packet wraps over end of ring buffer. */ - int semi_count = NE3210_STOP_PG*256 - ring_offset; - memcpy_fromio(skb->data, start, semi_count); - count -= semi_count; - memcpy_fromio(skb->data + semi_count, - ei_status.mem + TX_PAGES*256, count); - } else { - /* Packet is in one chunk. */ - memcpy_fromio(skb->data, start, count); - } -} - -static void ne3210_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - void __iomem *shmem = ei_status.mem + ((start_page - NE3210_START_PG)<<8); - - count = (count + 3) & ~3; /* Round up to doubleword */ - memcpy_toio(shmem, buf, count); -} - -static struct eisa_device_id ne3210_ids[] = { - { "EGL0101" }, - { "NVL1801" }, - { "" }, -}; -MODULE_DEVICE_TABLE(eisa, ne3210_ids); - -static struct eisa_driver ne3210_eisa_driver = { - .id_table = ne3210_ids, - .driver = { - .name = "ne3210", - .probe = ne3210_eisa_probe, - .remove = ne3210_eisa_remove, - }, -}; - -MODULE_DESCRIPTION("NE3210 EISA Ethernet driver"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(eisa, ne3210_ids); - -static int ne3210_init(void) -{ - return eisa_driver_register (&ne3210_eisa_driver); -} - -static void ne3210_cleanup(void) -{ - eisa_driver_unregister (&ne3210_eisa_driver); -} - -module_init (ne3210_init); -module_exit (ne3210_cleanup); |