summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/apple/mac89x0.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/apple/mac89x0.c')
-rw-r--r--drivers/net/ethernet/apple/mac89x0.c634
1 files changed, 634 insertions, 0 deletions
diff --git a/drivers/net/ethernet/apple/mac89x0.c b/drivers/net/ethernet/apple/mac89x0.c
new file mode 100644
index 000000000000..669b317974a8
--- /dev/null
+++ b/drivers/net/ethernet/apple/mac89x0.c
@@ -0,0 +1,634 @@
+/* mac89x0.c: A Crystal Semiconductor CS89[02]0 driver for linux. */
+/*
+ Written 1996 by Russell Nelson, with reference to skeleton.c
+ written 1993-1994 by Donald Becker.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ The author may be reached at nelson@crynwr.com, Crynwr
+ Software, 11 Grant St., Potsdam, NY 13676
+
+ Changelog:
+
+ Mike Cruse : mcruse@cti-ltd.com
+ : Changes for Linux 2.0 compatibility.
+ : Added dev_id parameter in net_interrupt(),
+ : request_irq() and free_irq(). Just NULL for now.
+
+ Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
+ : in net_open() and net_close() so kerneld would know
+ : that the module is in use and wouldn't eject the
+ : driver prematurely.
+
+ Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c
+ : as an example. Disabled autoprobing in init_module(),
+ : not a good thing to do to other devices while Linux
+ : is running from all accounts.
+
+ Alan Cox : Removed 1.2 support, added 2.1 extra counters.
+
+ David Huggins-Daines <dhd@debian.org>
+
+ Split this off into mac89x0.c, and gutted it of all parts which are
+ not relevant to the existing CS8900 cards on the Macintosh
+ (i.e. basically the Daynaport CS and LC cards). To be precise:
+
+ * Removed all the media-detection stuff, because these cards are
+ TP-only.
+
+ * Lobotomized the ISA interrupt bogosity, because these cards use
+ a hardwired NuBus interrupt and a magic ISAIRQ value in the card.
+
+ * Basically eliminated everything not relevant to getting the
+ cards minimally functioning on the Macintosh.
+
+ I might add that these cards are badly designed even from the Mac
+ standpoint, in that Dayna, in their infinite wisdom, used NuBus slot
+ I/O space and NuBus interrupts for these cards, but neglected to
+ provide anything even remotely resembling a NuBus ROM. Therefore we
+ have to probe for them in a brain-damaged ISA-like fashion.
+
+ Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 11/01/2001
+ check kmalloc and release the allocated memory on failure in
+ mac89x0_probe and in init_module
+ use local_irq_{save,restore}(flags) in net_get_stat, not just
+ local_irq_{dis,en}able()
+*/
+
+static char *version =
+"cs89x0.c:v1.02 11/26/96 Russell Nelson <nelson@crynwr.com>\n";
+
+/* ======================= configure the driver here ======================= */
+
+/* use 0 for production, 1 for verification, >2 for debug */
+#ifndef NET_DEBUG
+#define NET_DEBUG 0
+#endif
+
+/* ======================= end of configuration ======================= */
+
+
+/* Always include 'config.h' first in case the user wants to turn on
+ or override something. */
+#include <linux/module.h>
+
+/*
+ Sources:
+
+ Crynwr packet driver epktisa.
+
+ Crystal Semiconductor data sheets.
+
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/nubus.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/gfp.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/hwtest.h>
+#include <asm/macints.h>
+
+#include "cs89x0.h"
+
+static unsigned int net_debug = NET_DEBUG;
+
+/* Information that need to be kept for each board. */
+struct net_local {
+ int chip_type; /* one of: CS8900, CS8920, CS8920M */
+ char chip_revision; /* revision letter of the chip ('A'...) */
+ int send_cmd; /* the propercommand used to send a packet. */
+ int rx_mode;
+ int curr_rx_cfg;
+ int send_underrun; /* keep track of how many underruns in a row we get */
+ struct sk_buff *skb;
+};
+
+/* Index to functions, as function prototypes. */
+
+#if 0
+extern void reset_chip(struct net_device *dev);
+#endif
+static int net_open(struct net_device *dev);
+static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t net_interrupt(int irq, void *dev_id);
+static void set_multicast_list(struct net_device *dev);
+static void net_rx(struct net_device *dev);
+static int net_close(struct net_device *dev);
+static struct net_device_stats *net_get_stats(struct net_device *dev);
+static int set_mac_address(struct net_device *dev, void *addr);
+
+
+/* Example routines you must write ;->. */
+#define tx_done(dev) 1
+
+/* For reading/writing registers ISA-style */
+static inline int
+readreg_io(struct net_device *dev, int portno)
+{
+ nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
+ return swab16(nubus_readw(dev->base_addr + DATA_PORT));
+}
+
+static inline void
+writereg_io(struct net_device *dev, int portno, int value)
+{
+ nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
+ nubus_writew(swab16(value), dev->base_addr + DATA_PORT);
+}
+
+/* These are for reading/writing registers in shared memory */
+static inline int
+readreg(struct net_device *dev, int portno)
+{
+ return swab16(nubus_readw(dev->mem_start + portno));
+}
+
+static inline void
+writereg(struct net_device *dev, int portno, int value)
+{
+ nubus_writew(swab16(value), dev->mem_start + portno);
+}
+
+static const struct net_device_ops mac89x0_netdev_ops = {
+ .ndo_open = net_open,
+ .ndo_stop = net_close,
+ .ndo_start_xmit = net_send_packet,
+ .ndo_get_stats = net_get_stats,
+ .ndo_set_multicast_list = set_multicast_list,
+ .ndo_set_mac_address = set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
+/* Probe for the CS8900 card in slot E. We won't bother looking
+ anywhere else until we have a really good reason to do so. */
+struct net_device * __init mac89x0_probe(int unit)
+{
+ struct net_device *dev;
+ static int once_is_enough;
+ struct net_local *lp;
+ static unsigned version_printed;
+ int i, slot;
+ unsigned rev_type = 0;
+ unsigned long ioaddr;
+ unsigned short sig;
+ int err = -ENODEV;
+
+ if (!MACH_IS_MAC)
+ return ERR_PTR(-ENODEV);
+
+ dev = alloc_etherdev(sizeof(struct net_local));
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ if (unit >= 0) {
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+ }
+
+ if (once_is_enough)
+ goto out;
+ once_is_enough = 1;
+
+ /* We might have to parameterize this later */
+ slot = 0xE;
+ /* Get out now if there's a real NuBus card in slot E */
+ if (nubus_find_slot(slot, NULL) != NULL)
+ goto out;
+
+ /* The pseudo-ISA bits always live at offset 0x300 (gee,
+ wonder why...) */
+ ioaddr = (unsigned long)
+ nubus_slot_addr(slot) | (((slot&0xf) << 20) + DEFAULTIOBASE);
+ {
+ unsigned long flags;
+ int card_present;
+
+ local_irq_save(flags);
+ card_present = (hwreg_present((void*) ioaddr+4) &&
+ hwreg_present((void*) ioaddr + DATA_PORT));
+ local_irq_restore(flags);
+
+ if (!card_present)
+ goto out;
+ }
+
+ nubus_writew(0, ioaddr + ADD_PORT);
+ sig = nubus_readw(ioaddr + DATA_PORT);
+ if (sig != swab16(CHIP_EISA_ID_SIG))
+ goto out;
+
+ /* Initialize the net_device structure. */
+ lp = netdev_priv(dev);
+
+ /* Fill in the 'dev' fields. */
+ dev->base_addr = ioaddr;
+ dev->mem_start = (unsigned long)
+ nubus_slot_addr(slot) | (((slot&0xf) << 20) + MMIOBASE);
+ dev->mem_end = dev->mem_start + 0x1000;
+
+ /* Turn on shared memory */
+ writereg_io(dev, PP_BusCTL, MEMORY_ON);
+
+ /* get the chip type */
+ rev_type = readreg(dev, PRODUCT_ID_ADD);
+ lp->chip_type = rev_type &~ REVISON_BITS;
+ lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
+
+ /* Check the chip type and revision in order to set the correct send command
+ CS8920 revision C and CS8900 revision F can use the faster send. */
+ lp->send_cmd = TX_AFTER_381;
+ if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
+ lp->send_cmd = TX_NOW;
+ if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
+ lp->send_cmd = TX_NOW;
+
+ if (net_debug && version_printed++ == 0)
+ printk(version);
+
+ printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#8lx",
+ dev->name,
+ lp->chip_type==CS8900?'0':'2',
+ lp->chip_type==CS8920M?"M":"",
+ lp->chip_revision,
+ dev->base_addr);
+
+ /* Try to read the MAC address */
+ if ((readreg(dev, PP_SelfST) & (EEPROM_PRESENT | EEPROM_OK)) == 0) {
+ printk("\nmac89x0: No EEPROM, giving up now.\n");
+ goto out1;
+ } else {
+ for (i = 0; i < ETH_ALEN; i += 2) {
+ /* Big-endian (why??!) */
+ unsigned short s = readreg(dev, PP_IA + i);
+ dev->dev_addr[i] = s >> 8;
+ dev->dev_addr[i+1] = s & 0xff;
+ }
+ }
+
+ dev->irq = SLOT2IRQ(slot);
+
+ /* print the IRQ and ethernet address. */
+
+ printk(" IRQ %d ADDR %pM\n", dev->irq, dev->dev_addr);
+
+ dev->netdev_ops = &mac89x0_netdev_ops;
+
+ err = register_netdev(dev);
+ if (err)
+ goto out1;
+ return NULL;
+out1:
+ nubus_writew(0, dev->base_addr + ADD_PORT);
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+}
+
+#if 0
+/* This is useful for something, but I don't know what yet. */
+void __init reset_chip(struct net_device *dev)
+{
+ int reset_start_time;
+
+ writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
+
+ /* wait 30 ms */
+ msleep_interruptible(30);
+
+ /* Wait until the chip is reset */
+ reset_start_time = jiffies;
+ while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
+ ;
+}
+#endif
+
+/* Open/initialize the board. This is called (in the current kernel)
+ sometime after booting when the 'ifconfig' program is run.
+
+ This routine should set everything up anew at each open, even
+ registers that "should" only need to be set once at boot, so that
+ there is non-reboot way to recover if something goes wrong.
+ */
+static int
+net_open(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ int i;
+
+ /* Disable the interrupt for now */
+ writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) & ~ENABLE_IRQ);
+
+ /* Grab the interrupt */
+ if (request_irq(dev->irq, net_interrupt, 0, "cs89x0", dev))
+ return -EAGAIN;
+
+ /* Set up the IRQ - Apparently magic */
+ if (lp->chip_type == CS8900)
+ writereg(dev, PP_CS8900_ISAINT, 0);
+ else
+ writereg(dev, PP_CS8920_ISAINT, 0);
+
+ /* set the Ethernet address */
+ for (i=0; i < ETH_ALEN/2; i++)
+ writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
+
+ /* Turn on both receive and transmit operations */
+ writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
+
+ /* Receive only error free packets addressed to this card */
+ lp->rx_mode = 0;
+ writereg(dev, PP_RxCTL, DEF_RX_ACCEPT);
+
+ lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL;
+
+ writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
+
+ writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
+ TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
+
+ writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
+ TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
+
+ /* now that we've got our act together, enable everything */
+ writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) | ENABLE_IRQ);
+ netif_start_queue(dev);
+ return 0;
+}
+
+static int
+net_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ unsigned long flags;
+
+ if (net_debug > 3)
+ printk("%s: sent %d byte packet of type %x\n",
+ dev->name, skb->len,
+ (skb->data[ETH_ALEN+ETH_ALEN] << 8)
+ | skb->data[ETH_ALEN+ETH_ALEN+1]);
+
+ /* keep the upload from being interrupted, since we
+ ask the chip to start transmitting before the
+ whole packet has been completely uploaded. */
+ local_irq_save(flags);
+ netif_stop_queue(dev);
+
+ /* initiate a transmit sequence */
+ writereg(dev, PP_TxCMD, lp->send_cmd);
+ writereg(dev, PP_TxLength, skb->len);
+
+ /* Test to see if the chip has allocated memory for the packet */
+ if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
+ /* Gasp! It hasn't. But that shouldn't happen since
+ we're waiting for TxOk, so return 1 and requeue this packet. */
+ local_irq_restore(flags);
+ return NETDEV_TX_BUSY;
+ }
+
+ /* Write the contents of the packet */
+ skb_copy_from_linear_data(skb, (void *)(dev->mem_start + PP_TxFrame),
+ skb->len+1);
+
+ local_irq_restore(flags);
+ dev_kfree_skb (skb);
+
+ return NETDEV_TX_OK;
+}
+
+/* The typical workload of the driver:
+ Handle the network interface interrupts. */
+static irqreturn_t net_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct net_local *lp;
+ int ioaddr, status;
+
+ if (dev == NULL) {
+ printk ("net_interrupt(): irq %d for unknown device.\n", irq);
+ return IRQ_NONE;
+ }
+
+ ioaddr = dev->base_addr;
+ lp = netdev_priv(dev);
+
+ /* we MUST read all the events out of the ISQ, otherwise we'll never
+ get interrupted again. As a consequence, we can't have any limit
+ on the number of times we loop in the interrupt handler. The
+ hardware guarantees that eventually we'll run out of events. Of
+ course, if you're on a slow machine, and packets are arriving
+ faster than you can read them off, you're screwed. Hasta la
+ vista, baby! */
+ while ((status = swab16(nubus_readw(dev->base_addr + ISQ_PORT)))) {
+ if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
+ switch(status & ISQ_EVENT_MASK) {
+ case ISQ_RECEIVER_EVENT:
+ /* Got a packet(s). */
+ net_rx(dev);
+ break;
+ case ISQ_TRANSMITTER_EVENT:
+ dev->stats.tx_packets++;
+ netif_wake_queue(dev);
+ if ((status & TX_OK) == 0)
+ dev->stats.tx_errors++;
+ if (status & TX_LOST_CRS)
+ dev->stats.tx_carrier_errors++;
+ if (status & TX_SQE_ERROR)
+ dev->stats.tx_heartbeat_errors++;
+ if (status & TX_LATE_COL)
+ dev->stats.tx_window_errors++;
+ if (status & TX_16_COL)
+ dev->stats.tx_aborted_errors++;
+ break;
+ case ISQ_BUFFER_EVENT:
+ if (status & READY_FOR_TX) {
+ /* we tried to transmit a packet earlier,
+ but inexplicably ran out of buffers.
+ That shouldn't happen since we only ever
+ load one packet. Shrug. Do the right
+ thing anyway. */
+ netif_wake_queue(dev);
+ }
+ if (status & TX_UNDERRUN) {
+ if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
+ lp->send_underrun++;
+ if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
+ else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
+ }
+ break;
+ case ISQ_RX_MISS_EVENT:
+ dev->stats.rx_missed_errors += (status >> 6);
+ break;
+ case ISQ_TX_COL_EVENT:
+ dev->stats.collisions += (status >> 6);
+ break;
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+/* We have a good packet(s), get it/them out of the buffers. */
+static void
+net_rx(struct net_device *dev)
+{
+ struct sk_buff *skb;
+ int status, length;
+
+ status = readreg(dev, PP_RxStatus);
+ if ((status & RX_OK) == 0) {
+ dev->stats.rx_errors++;
+ if (status & RX_RUNT)
+ dev->stats.rx_length_errors++;
+ if (status & RX_EXTRA_DATA)
+ dev->stats.rx_length_errors++;
+ if ((status & RX_CRC_ERROR) &&
+ !(status & (RX_EXTRA_DATA|RX_RUNT)))
+ /* per str 172 */
+ dev->stats.rx_crc_errors++;
+ if (status & RX_DRIBBLE)
+ dev->stats.rx_frame_errors++;
+ return;
+ }
+
+ length = readreg(dev, PP_RxLength);
+ /* Malloc up new buffer. */
+ skb = alloc_skb(length, GFP_ATOMIC);
+ if (skb == NULL) {
+ printk("%s: Memory squeeze, dropping packet.\n", dev->name);
+ dev->stats.rx_dropped++;
+ return;
+ }
+ skb_put(skb, length);
+
+ skb_copy_to_linear_data(skb, (void *)(dev->mem_start + PP_RxFrame),
+ length);
+
+ if (net_debug > 3)printk("%s: received %d byte packet of type %x\n",
+ dev->name, length,
+ (skb->data[ETH_ALEN+ETH_ALEN] << 8)
+ | skb->data[ETH_ALEN+ETH_ALEN+1]);
+
+ skb->protocol=eth_type_trans(skb,dev);
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += length;
+}
+
+/* The inverse routine to net_open(). */
+static int
+net_close(struct net_device *dev)
+{
+
+ writereg(dev, PP_RxCFG, 0);
+ writereg(dev, PP_TxCFG, 0);
+ writereg(dev, PP_BufCFG, 0);
+ writereg(dev, PP_BusCTL, 0);
+
+ netif_stop_queue(dev);
+
+ free_irq(dev->irq, dev);
+
+ /* Update the statistics here. */
+
+ return 0;
+
+}
+
+/* Get the current statistics. This may be called with the card open or
+ closed. */
+static struct net_device_stats *
+net_get_stats(struct net_device *dev)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ /* Update the statistics from the device registers. */
+ dev->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
+ dev->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
+ local_irq_restore(flags);
+
+ return &dev->stats;
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+
+ if(dev->flags&IFF_PROMISC)
+ {
+ lp->rx_mode = RX_ALL_ACCEPT;
+ } else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) {
+ /* The multicast-accept list is initialized to accept-all, and we
+ rely on higher-level filtering for now. */
+ lp->rx_mode = RX_MULTCAST_ACCEPT;
+ }
+ else
+ lp->rx_mode = 0;
+
+ writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
+
+ /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
+ writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
+ (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
+}
+
+
+static int set_mac_address(struct net_device *dev, void *addr)
+{
+ int i;
+ printk("%s: Setting MAC address to ", dev->name);
+ for (i = 0; i < 6; i++)
+ printk(" %2.2x", dev->dev_addr[i] = ((unsigned char *)addr)[i]);
+ printk(".\n");
+ /* set the Ethernet address */
+ for (i=0; i < ETH_ALEN/2; i++)
+ writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
+
+ return 0;
+}
+
+#ifdef MODULE
+
+static struct net_device *dev_cs89x0;
+static int debug;
+
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "CS89[02]0 debug level (0-5)");
+MODULE_LICENSE("GPL");
+
+int __init
+init_module(void)
+{
+ net_debug = debug;
+ dev_cs89x0 = mac89x0_probe(-1);
+ if (IS_ERR(dev_cs89x0)) {
+ printk(KERN_WARNING "mac89x0.c: No card found\n");
+ return PTR_ERR(dev_cs89x0);
+ }
+ return 0;
+}
+
+void
+cleanup_module(void)
+{
+ unregister_netdev(dev_cs89x0);
+ nubus_writew(0, dev_cs89x0->base_addr + ADD_PORT);
+ free_netdev(dev_cs89x0);
+}
+#endif /* MODULE */