diff options
Diffstat (limited to 'drivers/net/ethernet/i825xx/ni52.h')
-rw-r--r-- | drivers/net/ethernet/i825xx/ni52.h | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/drivers/net/ethernet/i825xx/ni52.h b/drivers/net/ethernet/i825xx/ni52.h new file mode 100644 index 000000000000..0a03b2883327 --- /dev/null +++ b/drivers/net/ethernet/i825xx/ni52.h @@ -0,0 +1,310 @@ +/* + * Intel i82586 Ethernet definitions + * + * This is an extension to the Linux operating system, and is covered by the + * same GNU General Public License that covers that work. + * + * copyrights (c) 1994 by Michael Hipp (hippm@informatik.uni-tuebingen.de) + * + * I have done a look in the following sources: + * crynwr-packet-driver by Russ Nelson + * Garret A. Wollman's i82586-driver for BSD + */ + + +#define NI52_RESET 0 /* writing to this address, resets the i82586 */ +#define NI52_ATTENTION 1 /* channel attention, kick the 586 */ +#define NI52_TENA 3 /* 2-5 possibly wrong, Xmit enable */ +#define NI52_TDIS 2 /* Xmit disable */ +#define NI52_INTENA 5 /* Interrupt enable */ +#define NI52_INTDIS 4 /* Interrupt disable */ +#define NI52_MAGIC1 6 /* dunno exact function */ +#define NI52_MAGIC2 7 /* dunno exact function */ + +#define NI52_MAGICVAL1 0x00 /* magic-values for ni5210 card */ +#define NI52_MAGICVAL2 0x55 + +/* + * where to find the System Configuration Pointer (SCP) + */ +#define SCP_DEFAULT_ADDRESS 0xfffff4 + + +/* + * System Configuration Pointer Struct + */ + +struct scp_struct +{ + u16 zero_dum0; /* has to be zero */ + u8 sysbus; /* 0=16Bit,1=8Bit */ + u8 zero_dum1; /* has to be zero for 586 */ + u16 zero_dum2; + u16 zero_dum3; + u32 iscp; /* pointer to the iscp-block */ +}; + + +/* + * Intermediate System Configuration Pointer (ISCP) + */ +struct iscp_struct +{ + u8 busy; /* 586 clears after successful init */ + u8 zero_dummy; /* has to be zero */ + u16 scb_offset; /* pointeroffset to the scb_base */ + u32 scb_base; /* base-address of all 16-bit offsets */ +}; + +/* + * System Control Block (SCB) + */ +struct scb_struct +{ + u8 rus; + u8 cus; + u8 cmd_ruc; /* command word: RU part */ + u8 cmd_cuc; /* command word: CU part & ACK */ + u16 cbl_offset; /* pointeroffset, command block list */ + u16 rfa_offset; /* pointeroffset, receive frame area */ + u16 crc_errs; /* CRC-Error counter */ + u16 aln_errs; /* alignmenterror counter */ + u16 rsc_errs; /* Resourceerror counter */ + u16 ovrn_errs; /* OVerrunerror counter */ +}; + +/* + * possible command values for the command word + */ +#define RUC_MASK 0x0070 /* mask for RU commands */ +#define RUC_NOP 0x0000 /* NOP-command */ +#define RUC_START 0x0010 /* start RU */ +#define RUC_RESUME 0x0020 /* resume RU after suspend */ +#define RUC_SUSPEND 0x0030 /* suspend RU */ +#define RUC_ABORT 0x0040 /* abort receiver operation immediately */ + +#define CUC_MASK 0x07 /* mask for CU command */ +#define CUC_NOP 0x00 /* NOP-command */ +#define CUC_START 0x01 /* start execution of 1. cmd on the CBL */ +#define CUC_RESUME 0x02 /* resume after suspend */ +#define CUC_SUSPEND 0x03 /* Suspend CU */ +#define CUC_ABORT 0x04 /* abort command operation immediately */ + +#define ACK_MASK 0xf0 /* mask for ACK command */ +#define ACK_CX 0x80 /* acknowledges STAT_CX */ +#define ACK_FR 0x40 /* ack. STAT_FR */ +#define ACK_CNA 0x20 /* ack. STAT_CNA */ +#define ACK_RNR 0x10 /* ack. STAT_RNR */ + +/* + * possible status values for the status word + */ +#define STAT_MASK 0xf0 /* mask for cause of interrupt */ +#define STAT_CX 0x80 /* CU finished cmd with its I bit set */ +#define STAT_FR 0x40 /* RU finished receiving a frame */ +#define STAT_CNA 0x20 /* CU left active state */ +#define STAT_RNR 0x10 /* RU left ready state */ + +#define CU_STATUS 0x7 /* CU status, 0=idle */ +#define CU_SUSPEND 0x1 /* CU is suspended */ +#define CU_ACTIVE 0x2 /* CU is active */ + +#define RU_STATUS 0x70 /* RU status, 0=idle */ +#define RU_SUSPEND 0x10 /* RU suspended */ +#define RU_NOSPACE 0x20 /* RU no resources */ +#define RU_READY 0x40 /* RU is ready */ + +/* + * Receive Frame Descriptor (RFD) + */ +struct rfd_struct +{ + u8 stat_low; /* status word */ + u8 stat_high; /* status word */ + u8 rfd_sf; /* 82596 mode only */ + u8 last; /* Bit15,Last Frame on List / Bit14,suspend */ + u16 next; /* linkoffset to next RFD */ + u16 rbd_offset; /* pointeroffset to RBD-buffer */ + u8 dest[6]; /* ethernet-address, destination */ + u8 source[6]; /* ethernet-address, source */ + u16 length; /* 802.3 frame-length */ + u16 zero_dummy; /* dummy */ +}; + +#define RFD_LAST 0x80 /* last: last rfd in the list */ +#define RFD_SUSP 0x40 /* last: suspend RU after */ +#define RFD_COMPL 0x80 +#define RFD_OK 0x20 +#define RFD_BUSY 0x40 +#define RFD_ERR_LEN 0x10 /* Length error (if enabled length-checking */ +#define RFD_ERR_CRC 0x08 /* CRC error */ +#define RFD_ERR_ALGN 0x04 /* Alignment error */ +#define RFD_ERR_RNR 0x02 /* status: receiver out of resources */ +#define RFD_ERR_OVR 0x01 /* DMA Overrun! */ + +#define RFD_ERR_FTS 0x0080 /* Frame to short */ +#define RFD_ERR_NEOP 0x0040 /* No EOP flag (for bitstuffing only) */ +#define RFD_ERR_TRUN 0x0020 /* (82596 only/SF mode) indicates truncated frame */ +#define RFD_MATCHADD 0x0002 /* status: Destinationaddress !matches IA (only 82596) */ +#define RFD_COLLDET 0x0001 /* Detected collision during reception */ + +/* + * Receive Buffer Descriptor (RBD) + */ +struct rbd_struct +{ + u16 status; /* status word,number of used bytes in buff */ + u16 next; /* pointeroffset to next RBD */ + u32 buffer; /* receive buffer address pointer */ + u16 size; /* size of this buffer */ + u16 zero_dummy; /* dummy */ +}; + +#define RBD_LAST 0x8000 /* last buffer */ +#define RBD_USED 0x4000 /* this buffer has data */ +#define RBD_MASK 0x3fff /* size-mask for length */ + +/* + * Statusvalues for Commands/RFD + */ +#define STAT_COMPL 0x8000 /* status: frame/command is complete */ +#define STAT_BUSY 0x4000 /* status: frame/command is busy */ +#define STAT_OK 0x2000 /* status: frame/command is ok */ + +/* + * Action-Commands + */ +#define CMD_NOP 0x0000 /* NOP */ +#define CMD_IASETUP 0x0001 /* initial address setup command */ +#define CMD_CONFIGURE 0x0002 /* configure command */ +#define CMD_MCSETUP 0x0003 /* MC setup command */ +#define CMD_XMIT 0x0004 /* transmit command */ +#define CMD_TDR 0x0005 /* time domain reflectometer (TDR) command */ +#define CMD_DUMP 0x0006 /* dump command */ +#define CMD_DIAGNOSE 0x0007 /* diagnose command */ + +/* + * Action command bits + */ +#define CMD_LAST 0x8000 /* indicates last command in the CBL */ +#define CMD_SUSPEND 0x4000 /* suspend CU after this CB */ +#define CMD_INT 0x2000 /* generate interrupt after execution */ + +/* + * NOP - command + */ +struct nop_cmd_struct +{ + u16 cmd_status; /* status of this command */ + u16 cmd_cmd; /* the command itself (+bits) */ + u16 cmd_link; /* offsetpointer to next command */ +}; + +/* + * IA Setup command + */ +struct iasetup_cmd_struct +{ + u16 cmd_status; + u16 cmd_cmd; + u16 cmd_link; + u8 iaddr[6]; +}; + +/* + * Configure command + */ +struct configure_cmd_struct +{ + u16 cmd_status; + u16 cmd_cmd; + u16 cmd_link; + u8 byte_cnt; /* size of the config-cmd */ + u8 fifo; /* fifo/recv monitor */ + u8 sav_bf; /* save bad frames (bit7=1)*/ + u8 adr_len; /* adr_len(0-2),al_loc(3),pream(4-5),loopbak(6-7)*/ + u8 priority; /* lin_prio(0-2),exp_prio(4-6),bof_metd(7) */ + u8 ifs; /* inter frame spacing */ + u8 time_low; /* slot time low */ + u8 time_high; /* slot time high(0-2) and max. retries(4-7) */ + u8 promisc; /* promisc-mode(0) , et al (1-7) */ + u8 carr_coll; /* carrier(0-3)/collision(4-7) stuff */ + u8 fram_len; /* minimal frame len */ + u8 dummy; /* dummy */ +}; + +/* + * Multicast Setup command + */ +struct mcsetup_cmd_struct +{ + u16 cmd_status; + u16 cmd_cmd; + u16 cmd_link; + u16 mc_cnt; /* number of bytes in the MC-List */ + u8 mc_list[0][6]; /* pointer to 6 bytes entries */ +}; + +/* + * DUMP command + */ +struct dump_cmd_struct +{ + u16 cmd_status; + u16 cmd_cmd; + u16 cmd_link; + u16 dump_offset; /* pointeroffset to DUMP space */ +}; + +/* + * transmit command + */ +struct transmit_cmd_struct +{ + u16 cmd_status; + u16 cmd_cmd; + u16 cmd_link; + u16 tbd_offset; /* pointeroffset to TBD */ + u8 dest[6]; /* destination address of the frame */ + u16 length; /* user defined: 802.3 length / Ether type */ +}; + +#define TCMD_ERRMASK 0x0fa0 +#define TCMD_MAXCOLLMASK 0x000f +#define TCMD_MAXCOLL 0x0020 +#define TCMD_HEARTBEAT 0x0040 +#define TCMD_DEFERRED 0x0080 +#define TCMD_UNDERRUN 0x0100 +#define TCMD_LOSTCTS 0x0200 +#define TCMD_NOCARRIER 0x0400 +#define TCMD_LATECOLL 0x0800 + +struct tdr_cmd_struct +{ + u16 cmd_status; + u16 cmd_cmd; + u16 cmd_link; + u16 status; +}; + +#define TDR_LNK_OK 0x8000 /* No link problem identified */ +#define TDR_XCVR_PRB 0x4000 /* indicates a transceiver problem */ +#define TDR_ET_OPN 0x2000 /* open, no correct termination */ +#define TDR_ET_SRT 0x1000 /* TDR detected a short circuit */ +#define TDR_TIMEMASK 0x07ff /* mask for the time field */ + +/* + * Transmit Buffer Descriptor (TBD) + */ +struct tbd_struct +{ + u16 size; /* size + EOF-Flag(15) */ + u16 next; /* pointeroffset to next TBD */ + u32 buffer; /* pointer to buffer */ +}; + +#define TBD_LAST 0x8000 /* EOF-Flag, indicates last buffer in list */ + + + + |