summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igb/e1000_82575.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_82575.c')
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_82575.c630
1 files changed, 406 insertions, 224 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index fdaaf2709d0a..84e7e0909def 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2012 Intel Corporation.
+ Copyright(c) 2007-2013 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -33,6 +33,7 @@
#include <linux/types.h>
#include <linux/if_ether.h>
+#include <linux/i2c.h>
#include "e1000_mac.h"
#include "e1000_82575.h"
@@ -110,184 +111,168 @@ static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw)
return ext_mdio;
}
-static s32 igb_get_invariants_82575(struct e1000_hw *hw)
+/**
+ * igb_init_phy_params_82575 - Init PHY func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
- struct e1000_nvm_info *nvm = &hw->nvm;
- struct e1000_mac_info *mac = &hw->mac;
- struct e1000_dev_spec_82575 * dev_spec = &hw->dev_spec._82575;
- u32 eecd;
- s32 ret_val;
- u16 size;
- u32 ctrl_ext = 0;
+ s32 ret_val = 0;
+ u32 ctrl_ext;
- switch (hw->device_id) {
- case E1000_DEV_ID_82575EB_COPPER:
- case E1000_DEV_ID_82575EB_FIBER_SERDES:
- case E1000_DEV_ID_82575GB_QUAD_COPPER:
- mac->type = e1000_82575;
- break;
- case E1000_DEV_ID_82576:
- case E1000_DEV_ID_82576_NS:
- case E1000_DEV_ID_82576_NS_SERDES:
- case E1000_DEV_ID_82576_FIBER:
- case E1000_DEV_ID_82576_SERDES:
- case E1000_DEV_ID_82576_QUAD_COPPER:
- case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
- case E1000_DEV_ID_82576_SERDES_QUAD:
- mac->type = e1000_82576;
- break;
- case E1000_DEV_ID_82580_COPPER:
- case E1000_DEV_ID_82580_FIBER:
- case E1000_DEV_ID_82580_QUAD_FIBER:
- case E1000_DEV_ID_82580_SERDES:
- case E1000_DEV_ID_82580_SGMII:
- case E1000_DEV_ID_82580_COPPER_DUAL:
- case E1000_DEV_ID_DH89XXCC_SGMII:
- case E1000_DEV_ID_DH89XXCC_SERDES:
- case E1000_DEV_ID_DH89XXCC_BACKPLANE:
- case E1000_DEV_ID_DH89XXCC_SFP:
- mac->type = e1000_82580;
- break;
- case E1000_DEV_ID_I350_COPPER:
- case E1000_DEV_ID_I350_FIBER:
- case E1000_DEV_ID_I350_SERDES:
- case E1000_DEV_ID_I350_SGMII:
- mac->type = e1000_i350;
- break;
- case E1000_DEV_ID_I210_COPPER:
- case E1000_DEV_ID_I210_COPPER_OEM1:
- case E1000_DEV_ID_I210_COPPER_IT:
- case E1000_DEV_ID_I210_FIBER:
- case E1000_DEV_ID_I210_SERDES:
- case E1000_DEV_ID_I210_SGMII:
- mac->type = e1000_i210;
- break;
- case E1000_DEV_ID_I211_COPPER:
- mac->type = e1000_i211;
- break;
- default:
- return -E1000_ERR_MAC_INIT;
- break;
+ if (hw->phy.media_type != e1000_media_type_copper) {
+ phy->type = e1000_phy_none;
+ goto out;
}
- /* Set media type */
- /*
- * The 82575 uses bits 22:23 for link mode. The mode can be changed
- * based on the EEPROM. We cannot rely upon device ID. There
- * is no distinguishable difference between fiber and internal
- * SerDes mode on the 82575. There can be an external PHY attached
- * on the SGMII interface. For this, we'll set sgmii_active to true.
- */
- phy->media_type = e1000_media_type_copper;
- dev_spec->sgmii_active = false;
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ phy->reset_delay_us = 100;
ctrl_ext = rd32(E1000_CTRL_EXT);
- switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
- case E1000_CTRL_EXT_LINK_MODE_SGMII:
- dev_spec->sgmii_active = true;
- break;
- case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
- case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
- hw->phy.media_type = e1000_media_type_internal_serdes;
- break;
- default:
- break;
+
+ if (igb_sgmii_active_82575(hw)) {
+ phy->ops.reset = igb_phy_hw_reset_sgmii_82575;
+ ctrl_ext |= E1000_CTRL_I2C_ENA;
+ } else {
+ phy->ops.reset = igb_phy_hw_reset;
+ ctrl_ext &= ~E1000_CTRL_I2C_ENA;
}
- /* Set mta register count */
- mac->mta_reg_count = 128;
- /* Set rar entry count */
- switch (mac->type) {
- case e1000_82576:
- mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+ igb_reset_mdicnfg_82580(hw);
+
+ if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) {
+ phy->ops.read_reg = igb_read_phy_reg_sgmii_82575;
+ phy->ops.write_reg = igb_write_phy_reg_sgmii_82575;
+ } else {
+ switch (hw->mac.type) {
+ case e1000_82580:
+ case e1000_i350:
+ phy->ops.read_reg = igb_read_phy_reg_82580;
+ phy->ops.write_reg = igb_write_phy_reg_82580;
+ break;
+ case e1000_i210:
+ case e1000_i211:
+ phy->ops.read_reg = igb_read_phy_reg_gs40g;
+ phy->ops.write_reg = igb_write_phy_reg_gs40g;
+ break;
+ default:
+ phy->ops.read_reg = igb_read_phy_reg_igp;
+ phy->ops.write_reg = igb_write_phy_reg_igp;
+ }
+ }
+
+ /* set lan id */
+ hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >>
+ E1000_STATUS_FUNC_SHIFT;
+
+ /* Set phy->phy_addr and phy->id. */
+ ret_val = igb_get_phy_id_82575(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Verify phy id and set remaining function pointers */
+ switch (phy->id) {
+ case I347AT4_E_PHY_ID:
+ case M88E1112_E_PHY_ID:
+ case M88E1111_I_PHY_ID:
+ phy->type = e1000_phy_m88;
+ phy->ops.get_phy_info = igb_get_phy_info_m88;
+ if (phy->id == I347AT4_E_PHY_ID ||
+ phy->id == M88E1112_E_PHY_ID)
+ phy->ops.get_cable_length =
+ igb_get_cable_length_m88_gen2;
+ else
+ phy->ops.get_cable_length = igb_get_cable_length_m88;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
break;
- case e1000_82580:
- mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
+ case IGP03E1000_E_PHY_ID:
+ phy->type = e1000_phy_igp_3;
+ phy->ops.get_phy_info = igb_get_phy_info_igp;
+ phy->ops.get_cable_length = igb_get_cable_length_igp_2;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp;
+ phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575;
+ phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state;
break;
- case e1000_i350:
- mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
+ case I82580_I_PHY_ID:
+ case I350_I_PHY_ID:
+ phy->type = e1000_phy_82580;
+ phy->ops.force_speed_duplex =
+ igb_phy_force_speed_duplex_82580;
+ phy->ops.get_cable_length = igb_get_cable_length_82580;
+ phy->ops.get_phy_info = igb_get_phy_info_82580;
+ phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580;
+ phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580;
break;
- default:
- mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
+ case I210_I_PHY_ID:
+ phy->type = e1000_phy_i210;
+ phy->ops.check_polarity = igb_check_polarity_m88;
+ phy->ops.get_phy_info = igb_get_phy_info_m88;
+ phy->ops.get_cable_length = igb_get_cable_length_m88_gen2;
+ phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580;
+ phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ goto out;
}
- /* reset */
- if (mac->type >= e1000_82580)
- mac->ops.reset_hw = igb_reset_hw_82580;
- else
- mac->ops.reset_hw = igb_reset_hw_82575;
- if (mac->type >= e1000_i210) {
- mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_i210;
- mac->ops.release_swfw_sync = igb_release_swfw_sync_i210;
- } else {
- mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_82575;
- mac->ops.release_swfw_sync = igb_release_swfw_sync_82575;
- }
+out:
+ return ret_val;
+}
- /* Set if part includes ASF firmware */
- mac->asf_firmware_present = true;
- /* Set if manageability features are enabled. */
- mac->arc_subsystem_valid =
- (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK)
- ? true : false;
- /* enable EEE on i350 parts and later parts */
- if (mac->type >= e1000_i350)
- dev_spec->eee_disable = false;
- else
- dev_spec->eee_disable = true;
- /* physical interface link setup */
- mac->ops.setup_physical_interface =
- (hw->phy.media_type == e1000_media_type_copper)
- ? igb_setup_copper_link_82575
- : igb_setup_serdes_link_82575;
+/**
+ * igb_init_nvm_params_82575 - Init NVM func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+s32 igb_init_nvm_params_82575(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+ u16 size;
- /* NVM initialization */
- eecd = rd32(E1000_EECD);
size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
E1000_EECD_SIZE_EX_SHIFT);
-
- /*
- * Added to a constant, "size" becomes the left-shift value
+ /* Added to a constant, "size" becomes the left-shift value
* for setting word_size.
*/
size += NVM_WORD_SIZE_BASE_SHIFT;
- /*
- * Check for invalid size
+ /* Just in case size is out of range, cap it to the largest
+ * EEPROM size supported
*/
- if ((hw->mac.type == e1000_82576) && (size > 15)) {
- pr_notice("The NVM size is not valid, defaulting to 32K\n");
+ if (size > 15)
size = 15;
- }
nvm->word_size = 1 << size;
if (hw->mac.type < e1000_i210) {
- nvm->opcode_bits = 8;
- nvm->delay_usec = 1;
+ nvm->opcode_bits = 8;
+ nvm->delay_usec = 1;
+
switch (nvm->override) {
case e1000_nvm_override_spi_large:
- nvm->page_size = 32;
+ nvm->page_size = 32;
nvm->address_bits = 16;
break;
case e1000_nvm_override_spi_small:
- nvm->page_size = 8;
+ nvm->page_size = 8;
nvm->address_bits = 8;
break;
default:
- nvm->page_size = eecd
- & E1000_EECD_ADDR_BITS ? 32 : 8;
- nvm->address_bits = eecd
- & E1000_EECD_ADDR_BITS ? 16 : 8;
+ nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+ nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ?
+ 16 : 8;
break;
}
if (nvm->word_size == (1 << 15))
nvm->page_size = 128;
nvm->type = e1000_nvm_eeprom_spi;
- } else
+ } else {
nvm->type = e1000_nvm_flash_hw;
+ }
/* NVM Function Pointers */
switch (hw->mac.type) {
@@ -344,118 +329,176 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
break;
}
- /* if part supports SR-IOV then initialize mailbox parameters */
+ return 0;
+}
+
+/**
+ * igb_init_mac_params_82575 - Init MAC func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 igb_init_mac_params_82575(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+
+ /* Set mta register count */
+ mac->mta_reg_count = 128;
+ /* Set rar entry count */
switch (mac->type) {
case e1000_82576:
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
+ break;
+ case e1000_82580:
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
+ break;
case e1000_i350:
- igb_init_mbx_params_pf(hw);
+ mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
break;
default:
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
break;
}
+ /* reset */
+ if (mac->type >= e1000_82580)
+ mac->ops.reset_hw = igb_reset_hw_82580;
+ else
+ mac->ops.reset_hw = igb_reset_hw_82575;
- /* setup PHY parameters */
- if (phy->media_type != e1000_media_type_copper) {
- phy->type = e1000_phy_none;
- return 0;
- }
-
- phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
- phy->reset_delay_us = 100;
-
- ctrl_ext = rd32(E1000_CTRL_EXT);
+ if (mac->type >= e1000_i210) {
+ mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_i210;
+ mac->ops.release_swfw_sync = igb_release_swfw_sync_i210;
- /* PHY function pointers */
- if (igb_sgmii_active_82575(hw)) {
- phy->ops.reset = igb_phy_hw_reset_sgmii_82575;
- ctrl_ext |= E1000_CTRL_I2C_ENA;
} else {
- phy->ops.reset = igb_phy_hw_reset;
- ctrl_ext &= ~E1000_CTRL_I2C_ENA;
+ mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_82575;
+ mac->ops.release_swfw_sync = igb_release_swfw_sync_82575;
}
- wr32(E1000_CTRL_EXT, ctrl_ext);
- igb_reset_mdicnfg_82580(hw);
-
- if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) {
- phy->ops.read_reg = igb_read_phy_reg_sgmii_82575;
- phy->ops.write_reg = igb_write_phy_reg_sgmii_82575;
- } else if ((hw->mac.type == e1000_82580)
- || (hw->mac.type == e1000_i350)) {
- phy->ops.read_reg = igb_read_phy_reg_82580;
- phy->ops.write_reg = igb_write_phy_reg_82580;
- } else if (hw->phy.type >= e1000_phy_i210) {
- phy->ops.read_reg = igb_read_phy_reg_gs40g;
- phy->ops.write_reg = igb_write_phy_reg_gs40g;
- } else {
- phy->ops.read_reg = igb_read_phy_reg_igp;
- phy->ops.write_reg = igb_write_phy_reg_igp;
- }
+ /* Set if part includes ASF firmware */
+ mac->asf_firmware_present = true;
+ /* Set if manageability features are enabled. */
+ mac->arc_subsystem_valid =
+ (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK)
+ ? true : false;
+ /* enable EEE on i350 parts and later parts */
+ if (mac->type >= e1000_i350)
+ dev_spec->eee_disable = false;
+ else
+ dev_spec->eee_disable = true;
+ /* physical interface link setup */
+ mac->ops.setup_physical_interface =
+ (hw->phy.media_type == e1000_media_type_copper)
+ ? igb_setup_copper_link_82575
+ : igb_setup_serdes_link_82575;
- /* set lan id */
- hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >>
- E1000_STATUS_FUNC_SHIFT;
+ return 0;
+}
- /* Set phy->phy_addr and phy->id. */
- ret_val = igb_get_phy_id_82575(hw);
- if (ret_val)
- return ret_val;
+static s32 igb_get_invariants_82575(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_dev_spec_82575 * dev_spec = &hw->dev_spec._82575;
+ s32 ret_val;
+ u32 ctrl_ext = 0;
- /* Verify phy id and set remaining function pointers */
- switch (phy->id) {
- case I347AT4_E_PHY_ID:
- case M88E1112_E_PHY_ID:
- case M88E1111_I_PHY_ID:
- phy->type = e1000_phy_m88;
- phy->ops.get_phy_info = igb_get_phy_info_m88;
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82575EB_COPPER:
+ case E1000_DEV_ID_82575EB_FIBER_SERDES:
+ case E1000_DEV_ID_82575GB_QUAD_COPPER:
+ mac->type = e1000_82575;
+ break;
+ case E1000_DEV_ID_82576:
+ case E1000_DEV_ID_82576_NS:
+ case E1000_DEV_ID_82576_NS_SERDES:
+ case E1000_DEV_ID_82576_FIBER:
+ case E1000_DEV_ID_82576_SERDES:
+ case E1000_DEV_ID_82576_QUAD_COPPER:
+ case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
+ case E1000_DEV_ID_82576_SERDES_QUAD:
+ mac->type = e1000_82576;
+ break;
+ case E1000_DEV_ID_82580_COPPER:
+ case E1000_DEV_ID_82580_FIBER:
+ case E1000_DEV_ID_82580_QUAD_FIBER:
+ case E1000_DEV_ID_82580_SERDES:
+ case E1000_DEV_ID_82580_SGMII:
+ case E1000_DEV_ID_82580_COPPER_DUAL:
+ case E1000_DEV_ID_DH89XXCC_SGMII:
+ case E1000_DEV_ID_DH89XXCC_SERDES:
+ case E1000_DEV_ID_DH89XXCC_BACKPLANE:
+ case E1000_DEV_ID_DH89XXCC_SFP:
+ mac->type = e1000_82580;
+ break;
+ case E1000_DEV_ID_I350_COPPER:
+ case E1000_DEV_ID_I350_FIBER:
+ case E1000_DEV_ID_I350_SERDES:
+ case E1000_DEV_ID_I350_SGMII:
+ mac->type = e1000_i350;
+ break;
+ case E1000_DEV_ID_I210_COPPER:
+ case E1000_DEV_ID_I210_COPPER_OEM1:
+ case E1000_DEV_ID_I210_COPPER_IT:
+ case E1000_DEV_ID_I210_FIBER:
+ case E1000_DEV_ID_I210_SERDES:
+ case E1000_DEV_ID_I210_SGMII:
+ mac->type = e1000_i210;
+ break;
+ case E1000_DEV_ID_I211_COPPER:
+ mac->type = e1000_i211;
+ break;
+ default:
+ return -E1000_ERR_MAC_INIT;
+ break;
+ }
- if (phy->id == I347AT4_E_PHY_ID ||
- phy->id == M88E1112_E_PHY_ID)
- phy->ops.get_cable_length = igb_get_cable_length_m88_gen2;
- else
- phy->ops.get_cable_length = igb_get_cable_length_m88;
+ /* Set media type */
+ /*
+ * The 82575 uses bits 22:23 for link mode. The mode can be changed
+ * based on the EEPROM. We cannot rely upon device ID. There
+ * is no distinguishable difference between fiber and internal
+ * SerDes mode on the 82575. There can be an external PHY attached
+ * on the SGMII interface. For this, we'll set sgmii_active to true.
+ */
+ hw->phy.media_type = e1000_media_type_copper;
+ dev_spec->sgmii_active = false;
- if (phy->id == I210_I_PHY_ID) {
- phy->ops.get_cable_length =
- igb_get_cable_length_m88_gen2;
- phy->ops.set_d0_lplu_state =
- igb_set_d0_lplu_state_82580;
- phy->ops.set_d3_lplu_state =
- igb_set_d3_lplu_state_82580;
- }
- phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
+ case E1000_CTRL_EXT_LINK_MODE_SGMII:
+ dev_spec->sgmii_active = true;
break;
- case IGP03E1000_E_PHY_ID:
- phy->type = e1000_phy_igp_3;
- phy->ops.get_phy_info = igb_get_phy_info_igp;
- phy->ops.get_cable_length = igb_get_cable_length_igp_2;
- phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp;
- phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575;
- phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state;
+ case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+ case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
+ hw->phy.media_type = e1000_media_type_internal_serdes;
break;
- case I82580_I_PHY_ID:
- case I350_I_PHY_ID:
- phy->type = e1000_phy_82580;
- phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580;
- phy->ops.get_cable_length = igb_get_cable_length_82580;
- phy->ops.get_phy_info = igb_get_phy_info_82580;
- phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580;
- phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580;
+ default:
break;
- case I210_I_PHY_ID:
- phy->type = e1000_phy_i210;
- phy->ops.get_phy_info = igb_get_phy_info_m88;
- phy->ops.check_polarity = igb_check_polarity_m88;
- phy->ops.get_cable_length = igb_get_cable_length_m88_gen2;
- phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580;
- phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580;
- phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
+ }
+
+ /* mac initialization and operations */
+ ret_val = igb_init_mac_params_82575(hw);
+ if (ret_val)
+ goto out;
+
+ /* NVM initialization */
+ ret_val = igb_init_nvm_params_82575(hw);
+ if (ret_val)
+ goto out;
+
+ /* if part supports SR-IOV then initialize mailbox parameters */
+ switch (mac->type) {
+ case e1000_82576:
+ case e1000_i350:
+ igb_init_mbx_params_pf(hw);
break;
default:
- return -E1000_ERR_PHY;
+ break;
}
- return 0;
+ /* setup PHY parameters */
+ ret_val = igb_init_phy_params_82575(hw);
+
+out:
+ return ret_val;
}
/**
@@ -2302,18 +2345,157 @@ out:
return ret_val;
}
+static const u8 e1000_emc_temp_data[4] = {
+ E1000_EMC_INTERNAL_DATA,
+ E1000_EMC_DIODE1_DATA,
+ E1000_EMC_DIODE2_DATA,
+ E1000_EMC_DIODE3_DATA
+};
+static const u8 e1000_emc_therm_limit[4] = {
+ E1000_EMC_INTERNAL_THERM_LIMIT,
+ E1000_EMC_DIODE1_THERM_LIMIT,
+ E1000_EMC_DIODE2_THERM_LIMIT,
+ E1000_EMC_DIODE3_THERM_LIMIT
+};
+
+/* igb_get_thermal_sensor_data_generic - Gathers thermal sensor data
+ * @hw: pointer to hardware structure
+ *
+ * Updates the temperatures in mac.thermal_sensor_data
+ */
+s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw)
+{
+ s32 status = E1000_SUCCESS;
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 i;
+ struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
+ return E1000_NOT_IMPLEMENTED;
+
+ data->sensor[0].temp = (rd32(E1000_THMJT) & 0xFF);
+
+ /* Return the internal sensor only if ETS is unsupported */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset);
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+ return status;
+
+ hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg);
+ if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
+ != NVM_ETS_TYPE_EMC)
+ return E1000_NOT_IMPLEMENTED;
+
+ num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
+ if (num_sensors > E1000_MAX_SENSORS)
+ num_sensors = E1000_MAX_SENSORS;
+
+ for (i = 1; i < num_sensors; i++) {
+ hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor);
+ sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
+ NVM_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
+ NVM_ETS_DATA_LOC_SHIFT);
+
+ if (sensor_location != 0)
+ hw->phy.ops.read_i2c_byte(hw,
+ e1000_emc_temp_data[sensor_index],
+ E1000_I2C_THERMAL_SENSOR_ADDR,
+ &data->sensor[i].temp);
+ }
+ return status;
+}
+
+/* igb_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Sets the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
+ */
+s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw)
+{
+ s32 status = E1000_SUCCESS;
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 low_thresh_delta;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 therm_limit;
+ u8 i;
+ struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
+ return E1000_NOT_IMPLEMENTED;
+
+ memset(data, 0, sizeof(struct e1000_thermal_sensor_data));
+
+ data->sensor[0].location = 0x1;
+ data->sensor[0].caution_thresh =
+ (rd32(E1000_THHIGHTC) & 0xFF);
+ data->sensor[0].max_op_thresh =
+ (rd32(E1000_THLOWTC) & 0xFF);
+
+ /* Return the internal sensor only if ETS is unsupported */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset);
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+ return status;
+
+ hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg);
+ if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
+ != NVM_ETS_TYPE_EMC)
+ return E1000_NOT_IMPLEMENTED;
+
+ low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >>
+ NVM_ETS_LTHRES_DELTA_SHIFT);
+ num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
+
+ for (i = 1; i <= num_sensors; i++) {
+ hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor);
+ sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
+ NVM_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
+ NVM_ETS_DATA_LOC_SHIFT);
+ therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK;
+
+ hw->phy.ops.write_i2c_byte(hw,
+ e1000_emc_therm_limit[sensor_index],
+ E1000_I2C_THERMAL_SENSOR_ADDR,
+ therm_limit);
+
+ if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) {
+ data->sensor[i].location = sensor_location;
+ data->sensor[i].caution_thresh = therm_limit;
+ data->sensor[i].max_op_thresh = therm_limit -
+ low_thresh_delta;
+ }
+ }
+ return status;
+}
+
static struct e1000_mac_operations e1000_mac_ops_82575 = {
.init_hw = igb_init_hw_82575,
.check_for_link = igb_check_for_link_82575,
.rar_set = igb_rar_set,
.read_mac_addr = igb_read_mac_addr_82575,
.get_speed_and_duplex = igb_get_speed_and_duplex_copper,
+#ifdef CONFIG_IGB_HWMON
+ .get_thermal_sensor_data = igb_get_thermal_sensor_data_generic,
+ .init_thermal_sensor_thresh = igb_init_thermal_sensor_thresh_generic,
+#endif
};
static struct e1000_phy_operations e1000_phy_ops_82575 = {
.acquire = igb_acquire_phy_82575,
.get_cfg_done = igb_get_cfg_done_82575,
.release = igb_release_phy_82575,
+ .write_i2c_byte = igb_write_i2c_byte,
+ .read_i2c_byte = igb_read_i2c_byte,
};
static struct e1000_nvm_operations e1000_nvm_ops_82575 = {