summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c')
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c111
1 files changed, 67 insertions, 44 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index 0e8937c1184a..da32d6037e3e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -30,37 +30,76 @@
#include "dwmac1000.h"
#include "dwmac_dma.h"
-static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
- int burst_len, u32 dma_tx, u32 dma_rx, int atds)
+static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
{
- u32 value = readl(ioaddr + DMA_BUS_MODE);
- int limit;
+ u32 value = readl(ioaddr + DMA_AXI_BUS_MODE);
+ int i;
- /* DMA SW reset */
- value |= DMA_BUS_MODE_SFT_RESET;
- writel(value, ioaddr + DMA_BUS_MODE);
- limit = 10;
- while (limit--) {
- if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
+ pr_info("dwmac1000: Master AXI performs %s burst length\n",
+ !(value & DMA_AXI_UNDEF) ? "fixed" : "any");
+
+ if (axi->axi_lpi_en)
+ value |= DMA_AXI_EN_LPI;
+ if (axi->axi_xit_frm)
+ value |= DMA_AXI_LPI_XIT_FRM;
+
+ value |= (axi->axi_wr_osr_lmt & DMA_AXI_WR_OSR_LMT_MASK) <<
+ DMA_AXI_WR_OSR_LMT_SHIFT;
+
+ value |= (axi->axi_rd_osr_lmt & DMA_AXI_RD_OSR_LMT_MASK) <<
+ DMA_AXI_RD_OSR_LMT_SHIFT;
+
+ /* Depending on the UNDEF bit the Master AXI will perform any burst
+ * length according to the BLEN programmed (by default all BLEN are
+ * set).
+ */
+ for (i = 0; i < AXI_BLEN; i++) {
+ switch (axi->axi_blen[i]) {
+ case 256:
+ value |= DMA_AXI_BLEN256;
break;
- mdelay(10);
+ case 128:
+ value |= DMA_AXI_BLEN128;
+ break;
+ case 64:
+ value |= DMA_AXI_BLEN64;
+ break;
+ case 32:
+ value |= DMA_AXI_BLEN32;
+ break;
+ case 16:
+ value |= DMA_AXI_BLEN16;
+ break;
+ case 8:
+ value |= DMA_AXI_BLEN8;
+ break;
+ case 4:
+ value |= DMA_AXI_BLEN4;
+ break;
+ }
}
- if (limit < 0)
- return -EBUSY;
+
+ writel(value, ioaddr + DMA_AXI_BUS_MODE);
+}
+
+static void dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
+ int aal, u32 dma_tx, u32 dma_rx, int atds)
+{
+ u32 value = readl(ioaddr + DMA_BUS_MODE);
/*
- * Set the DMA PBL (Programmable Burst Length) mode
- * Before stmmac core 3.50 this mode bit was 4xPBL, and
+ * Set the DMA PBL (Programmable Burst Length) mode.
+ *
+ * Note: before stmmac core 3.50 this mode bit was 4xPBL, and
* post 3.5 mode bit acts as 8*PBL.
- * For core rev < 3.5, when the core is set for 4xPBL mode, the
- * DMA transfers the data in 4, 8, 16, 32, 64 & 128 beats
- * depending on pbl value.
- * For core rev > 3.5, when the core is set for 8xPBL mode, the
- * DMA transfers the data in 8, 16, 32, 64, 128 & 256 beats
- * depending on pbl value.
+ *
+ * This configuration doesn't take care about the Separate PBL
+ * so only the bits: 13-8 are programmed with the PBL passed from the
+ * platform.
*/
- value = DMA_BUS_MODE_PBL | ((pbl << DMA_BUS_MODE_PBL_SHIFT) |
- (pbl << DMA_BUS_MODE_RPBL_SHIFT));
+ value |= DMA_BUS_MODE_MAXPBL;
+ value &= ~DMA_BUS_MODE_PBL_MASK;
+ value |= (pbl << DMA_BUS_MODE_PBL_SHIFT);
/* Set the Fixed burst mode */
if (fb)
@@ -73,26 +112,10 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
if (atds)
value |= DMA_BUS_MODE_ATDS;
- writel(value, ioaddr + DMA_BUS_MODE);
+ if (aal)
+ value |= DMA_BUS_MODE_AAL;
- /* In case of GMAC AXI configuration, program the DMA_AXI_BUS_MODE
- * for supported bursts.
- *
- * Note: This is applicable only for revision GMACv3.61a. For
- * older version this register is reserved and shall have no
- * effect.
- *
- * Note:
- * For Fixed Burst Mode: if we directly write 0xFF to this
- * register using the configurations pass from platform code,
- * this would ensure that all bursts supported by core are set
- * and those which are not supported would remain ineffective.
- *
- * For Non Fixed Burst Mode: provide the maximum value of the
- * burst length. Any burst equal or below the provided burst
- * length would be allowed to perform.
- */
- writel(burst_len, ioaddr + DMA_AXI_BUS_MODE);
+ writel(value, ioaddr + DMA_BUS_MODE);
/* Mask interrupts by writing to CSR7 */
writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
@@ -102,8 +125,6 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
*/
writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
-
- return 0;
}
static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
@@ -205,7 +226,9 @@ static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt)
}
const struct stmmac_dma_ops dwmac1000_dma_ops = {
+ .reset = dwmac_dma_reset,
.init = dwmac1000_dma_init,
+ .axi = dwmac1000_dma_axi,
.dump_regs = dwmac1000_dump_dma_regs,
.dma_mode = dwmac1000_dma_operation_mode,
.enable_dma_transmission = dwmac_enable_dma_transmission,