diff options
Diffstat (limited to 'drivers/net/ethernet/ti/cpsw.c')
-rw-r--r-- | drivers/net/ethernet/ti/cpsw.c | 111 |
1 files changed, 53 insertions, 58 deletions
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index a39131f494ec..7d8dd0d2182e 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -33,8 +33,6 @@ #include <linux/of_net.h> #include <linux/of_device.h> #include <linux/if_vlan.h> -#include <linux/mfd/syscon.h> -#include <linux/regmap.h> #include <linux/pinctrl/consumer.h> @@ -761,17 +759,25 @@ requeue: dev_kfree_skb_any(new_skb); } -static irqreturn_t cpsw_interrupt(int irq, void *dev_id) +static irqreturn_t cpsw_tx_interrupt(int irq, void *dev_id) { struct cpsw_priv *priv = dev_id; - int value = irq - priv->irqs_table[0]; - /* NOTICE: Ending IRQ here. The trick with the 'value' variable above - * is to make sure we will always write the correct value to the EOI - * register. Namely 0 for RX_THRESH Interrupt, 1 for RX Interrupt, 2 - * for TX Interrupt and 3 for MISC Interrupt. - */ - cpdma_ctlr_eoi(priv->dma, value); + cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_TX); + cpdma_chan_process(priv->txch, 128); + + priv = cpsw_get_slave_priv(priv, 1); + if (priv) + cpdma_chan_process(priv->txch, 128); + + return IRQ_HANDLED; +} + +static irqreturn_t cpsw_rx_interrupt(int irq, void *dev_id) +{ + struct cpsw_priv *priv = dev_id; + + cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX); cpsw_intr_disable(priv); if (priv->irq_enabled == true) { @@ -1624,7 +1630,8 @@ static void cpsw_ndo_poll_controller(struct net_device *ndev) cpsw_intr_disable(priv); cpdma_ctlr_int_ctrl(priv->dma, false); - cpsw_interrupt(ndev->irq, priv); + cpsw_rx_interrupt(priv->irqs_table[0], priv); + cpsw_tx_interrupt(priv->irqs_table[1], priv); cpdma_ctlr_int_ctrl(priv->dma, true); cpsw_intr_enable(priv); } @@ -1927,36 +1934,6 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv, slave->port_vlan = data->dual_emac_res_vlan; } -#define AM33XX_CTRL_MAC_LO_REG(id) (0x630 + 0x8 * id) -#define AM33XX_CTRL_MAC_HI_REG(id) (0x630 + 0x8 * id + 0x4) - -static int cpsw_am33xx_cm_get_macid(struct device *dev, int slave, - u8 *mac_addr) -{ - u32 macid_lo; - u32 macid_hi; - struct regmap *syscon; - - syscon = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon"); - if (IS_ERR(syscon)) { - if (PTR_ERR(syscon) == -ENODEV) - return 0; - return PTR_ERR(syscon); - } - - regmap_read(syscon, AM33XX_CTRL_MAC_LO_REG(slave), &macid_lo); - regmap_read(syscon, AM33XX_CTRL_MAC_HI_REG(slave), &macid_hi); - - mac_addr[5] = (macid_lo >> 8) & 0xff; - mac_addr[4] = macid_lo & 0xff; - mac_addr[3] = (macid_hi >> 24) & 0xff; - mac_addr[2] = (macid_hi >> 16) & 0xff; - mac_addr[1] = (macid_hi >> 8) & 0xff; - mac_addr[0] = macid_hi & 0xff; - - return 0; -} - static int cpsw_probe_dt(struct cpsw_platform_data *data, struct platform_device *pdev) { @@ -2081,7 +2058,8 @@ no_phy_slave: memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN); } else { if (of_machine_is_compatible("ti,am33xx")) { - ret = cpsw_am33xx_cm_get_macid(&pdev->dev, i, + ret = cpsw_am33xx_cm_get_macid(&pdev->dev, + 0x630, i, slave_data->mac_addr); if (ret) return ret; @@ -2192,7 +2170,8 @@ static int cpsw_probe(struct platform_device *pdev) void __iomem *ss_regs; struct resource *res, *ss_res; u32 slave_offset, sliver_offset, slave_size; - int ret = 0, i, k = 0; + int ret = 0, i; + int irq; ndev = alloc_etherdev(sizeof(struct cpsw_priv)); if (!ndev) { @@ -2374,31 +2353,47 @@ static int cpsw_probe(struct platform_device *pdev) goto clean_dma_ret; } - ndev->irq = platform_get_irq(pdev, 0); + ndev->irq = platform_get_irq(pdev, 1); if (ndev->irq < 0) { dev_err(priv->dev, "error getting irq resource\n"); ret = -ENOENT; goto clean_ale_ret; } - while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) { - if (k >= ARRAY_SIZE(priv->irqs_table)) { - ret = -EINVAL; - goto clean_ale_ret; - } + /* Grab RX and TX IRQs. Note that we also have RX_THRESHOLD and + * MISC IRQs which are always kept disabled with this driver so + * we will not request them. + * + * If anyone wants to implement support for those, make sure to + * first request and append them to irqs_table array. + */ - ret = devm_request_irq(&pdev->dev, res->start, cpsw_interrupt, - 0, dev_name(&pdev->dev), priv); - if (ret < 0) { - dev_err(priv->dev, "error attaching irq (%d)\n", ret); - goto clean_ale_ret; - } + /* RX IRQ */ + irq = platform_get_irq(pdev, 1); + if (irq < 0) + goto clean_ale_ret; - priv->irqs_table[k] = res->start; - k++; + priv->irqs_table[0] = irq; + ret = devm_request_irq(&pdev->dev, irq, cpsw_rx_interrupt, + 0, dev_name(&pdev->dev), priv); + if (ret < 0) { + dev_err(priv->dev, "error attaching irq (%d)\n", ret); + goto clean_ale_ret; } - priv->num_irqs = k; + /* TX IRQ */ + irq = platform_get_irq(pdev, 2); + if (irq < 0) + goto clean_ale_ret; + + priv->irqs_table[1] = irq; + ret = devm_request_irq(&pdev->dev, irq, cpsw_tx_interrupt, + 0, dev_name(&pdev->dev), priv); + if (ret < 0) { + dev_err(priv->dev, "error attaching irq (%d)\n", ret); + goto clean_ale_ret; + } + priv->num_irqs = 2; ndev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; |