summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/xilinx/ll_temac.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/xilinx/ll_temac.h')
-rw-r--r--drivers/net/ethernet/xilinx/ll_temac.h385
1 files changed, 385 insertions, 0 deletions
diff --git a/drivers/net/ethernet/xilinx/ll_temac.h b/drivers/net/ethernet/xilinx/ll_temac.h
new file mode 100644
index 000000000000..522abe2ff25a
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/ll_temac.h
@@ -0,0 +1,385 @@
+
+#ifndef XILINX_LL_TEMAC_H
+#define XILINX_LL_TEMAC_H
+
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+
+#ifdef CONFIG_PPC_DCR
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#endif
+
+/* packet size info */
+#define XTE_HDR_SIZE 14 /* size of Ethernet header */
+#define XTE_TRL_SIZE 4 /* size of Ethernet trailer (FCS) */
+#define XTE_JUMBO_MTU 9000
+#define XTE_MAX_JUMBO_FRAME_SIZE (XTE_JUMBO_MTU + XTE_HDR_SIZE + XTE_TRL_SIZE)
+
+/* Configuration options */
+
+/* Accept all incoming packets.
+ * This option defaults to disabled (cleared) */
+#define XTE_OPTION_PROMISC (1 << 0)
+/* Jumbo frame support for Tx & Rx.
+ * This option defaults to disabled (cleared) */
+#define XTE_OPTION_JUMBO (1 << 1)
+/* VLAN Rx & Tx frame support.
+ * This option defaults to disabled (cleared) */
+#define XTE_OPTION_VLAN (1 << 2)
+/* Enable recognition of flow control frames on Rx
+ * This option defaults to enabled (set) */
+#define XTE_OPTION_FLOW_CONTROL (1 << 4)
+/* Strip FCS and PAD from incoming frames.
+ * Note: PAD from VLAN frames is not stripped.
+ * This option defaults to disabled (set) */
+#define XTE_OPTION_FCS_STRIP (1 << 5)
+/* Generate FCS field and add PAD automatically for outgoing frames.
+ * This option defaults to enabled (set) */
+#define XTE_OPTION_FCS_INSERT (1 << 6)
+/* Enable Length/Type error checking for incoming frames. When this option is
+set, the MAC will filter frames that have a mismatched type/length field
+and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these
+types of frames are encountered. When this option is cleared, the MAC will
+allow these types of frames to be received.
+This option defaults to enabled (set) */
+#define XTE_OPTION_LENTYPE_ERR (1 << 7)
+/* Enable the transmitter.
+ * This option defaults to enabled (set) */
+#define XTE_OPTION_TXEN (1 << 11)
+/* Enable the receiver
+* This option defaults to enabled (set) */
+#define XTE_OPTION_RXEN (1 << 12)
+
+/* Default options set when device is initialized or reset */
+#define XTE_OPTION_DEFAULTS \
+ (XTE_OPTION_TXEN | \
+ XTE_OPTION_FLOW_CONTROL | \
+ XTE_OPTION_RXEN)
+
+/* XPS_LL_TEMAC SDMA registers definition */
+
+#define TX_NXTDESC_PTR 0x00 /* r */
+#define TX_CURBUF_ADDR 0x01 /* r */
+#define TX_CURBUF_LENGTH 0x02 /* r */
+#define TX_CURDESC_PTR 0x03 /* rw */
+#define TX_TAILDESC_PTR 0x04 /* rw */
+#define TX_CHNL_CTRL 0x05 /* rw */
+/*
+ 0:7 24:31 IRQTimeout
+ 8:15 16:23 IRQCount
+ 16:20 11:15 Reserved
+ 21 10 0
+ 22 9 UseIntOnEnd
+ 23 8 LdIRQCnt
+ 24 7 IRQEn
+ 25:28 3:6 Reserved
+ 29 2 IrqErrEn
+ 30 1 IrqDlyEn
+ 31 0 IrqCoalEn
+*/
+#define CHNL_CTRL_IRQ_IOE (1 << 9)
+#define CHNL_CTRL_IRQ_EN (1 << 7)
+#define CHNL_CTRL_IRQ_ERR_EN (1 << 2)
+#define CHNL_CTRL_IRQ_DLY_EN (1 << 1)
+#define CHNL_CTRL_IRQ_COAL_EN (1 << 0)
+#define TX_IRQ_REG 0x06 /* rw */
+/*
+ 0:7 24:31 DltTmrValue
+ 8:15 16:23 ClscCntrValue
+ 16:17 14:15 Reserved
+ 18:21 10:13 ClscCnt
+ 22:23 8:9 DlyCnt
+ 24:28 3::7 Reserved
+ 29 2 ErrIrq
+ 30 1 DlyIrq
+ 31 0 CoalIrq
+ */
+#define TX_CHNL_STS 0x07 /* r */
+/*
+ 0:9 22:31 Reserved
+ 10 21 TailPErr
+ 11 20 CmpErr
+ 12 19 AddrErr
+ 13 18 NxtPErr
+ 14 17 CurPErr
+ 15 16 BsyWr
+ 16:23 8:15 Reserved
+ 24 7 Error
+ 25 6 IOE
+ 26 5 SOE
+ 27 4 Cmplt
+ 28 3 SOP
+ 29 2 EOP
+ 30 1 EngBusy
+ 31 0 Reserved
+*/
+
+#define RX_NXTDESC_PTR 0x08 /* r */
+#define RX_CURBUF_ADDR 0x09 /* r */
+#define RX_CURBUF_LENGTH 0x0a /* r */
+#define RX_CURDESC_PTR 0x0b /* rw */
+#define RX_TAILDESC_PTR 0x0c /* rw */
+#define RX_CHNL_CTRL 0x0d /* rw */
+/*
+ 0:7 24:31 IRQTimeout
+ 8:15 16:23 IRQCount
+ 16:20 11:15 Reserved
+ 21 10 0
+ 22 9 UseIntOnEnd
+ 23 8 LdIRQCnt
+ 24 7 IRQEn
+ 25:28 3:6 Reserved
+ 29 2 IrqErrEn
+ 30 1 IrqDlyEn
+ 31 0 IrqCoalEn
+ */
+#define RX_IRQ_REG 0x0e /* rw */
+#define IRQ_COAL (1 << 0)
+#define IRQ_DLY (1 << 1)
+#define IRQ_ERR (1 << 2)
+#define IRQ_DMAERR (1 << 7) /* this is not documented ??? */
+/*
+ 0:7 24:31 DltTmrValue
+ 8:15 16:23 ClscCntrValue
+ 16:17 14:15 Reserved
+ 18:21 10:13 ClscCnt
+ 22:23 8:9 DlyCnt
+ 24:28 3::7 Reserved
+*/
+#define RX_CHNL_STS 0x0f /* r */
+#define CHNL_STS_ENGBUSY (1 << 1)
+#define CHNL_STS_EOP (1 << 2)
+#define CHNL_STS_SOP (1 << 3)
+#define CHNL_STS_CMPLT (1 << 4)
+#define CHNL_STS_SOE (1 << 5)
+#define CHNL_STS_IOE (1 << 6)
+#define CHNL_STS_ERR (1 << 7)
+
+#define CHNL_STS_BSYWR (1 << 16)
+#define CHNL_STS_CURPERR (1 << 17)
+#define CHNL_STS_NXTPERR (1 << 18)
+#define CHNL_STS_ADDRERR (1 << 19)
+#define CHNL_STS_CMPERR (1 << 20)
+#define CHNL_STS_TAILERR (1 << 21)
+/*
+ 0:9 22:31 Reserved
+ 10 21 TailPErr
+ 11 20 CmpErr
+ 12 19 AddrErr
+ 13 18 NxtPErr
+ 14 17 CurPErr
+ 15 16 BsyWr
+ 16:23 8:15 Reserved
+ 24 7 Error
+ 25 6 IOE
+ 26 5 SOE
+ 27 4 Cmplt
+ 28 3 SOP
+ 29 2 EOP
+ 30 1 EngBusy
+ 31 0 Reserved
+*/
+
+#define DMA_CONTROL_REG 0x10 /* rw */
+#define DMA_CONTROL_RST (1 << 0)
+#define DMA_TAIL_ENABLE (1 << 2)
+
+/* XPS_LL_TEMAC direct registers definition */
+
+#define XTE_RAF0_OFFSET 0x00
+#define RAF0_RST (1 << 0)
+#define RAF0_MCSTREJ (1 << 1)
+#define RAF0_BCSTREJ (1 << 2)
+#define XTE_TPF0_OFFSET 0x04
+#define XTE_IFGP0_OFFSET 0x08
+#define XTE_ISR0_OFFSET 0x0c
+#define ISR0_HARDACSCMPLT (1 << 0)
+#define ISR0_AUTONEG (1 << 1)
+#define ISR0_RXCMPLT (1 << 2)
+#define ISR0_RXREJ (1 << 3)
+#define ISR0_RXFIFOOVR (1 << 4)
+#define ISR0_TXCMPLT (1 << 5)
+#define ISR0_RXDCMLCK (1 << 6)
+
+#define XTE_IPR0_OFFSET 0x10
+#define XTE_IER0_OFFSET 0x14
+
+#define XTE_MSW0_OFFSET 0x20
+#define XTE_LSW0_OFFSET 0x24
+#define XTE_CTL0_OFFSET 0x28
+#define XTE_RDY0_OFFSET 0x2c
+
+#define XTE_RSE_MIIM_RR_MASK 0x0002
+#define XTE_RSE_MIIM_WR_MASK 0x0004
+#define XTE_RSE_CFG_RR_MASK 0x0020
+#define XTE_RSE_CFG_WR_MASK 0x0040
+#define XTE_RDY0_HARD_ACS_RDY_MASK (0x10000)
+
+/* XPS_LL_TEMAC indirect registers offset definition */
+
+#define XTE_RXC0_OFFSET 0x00000200 /* Rx configuration word 0 */
+#define XTE_RXC1_OFFSET 0x00000240 /* Rx configuration word 1 */
+#define XTE_RXC1_RXRST_MASK (1 << 31) /* Receiver reset */
+#define XTE_RXC1_RXJMBO_MASK (1 << 30) /* Jumbo frame enable */
+#define XTE_RXC1_RXFCS_MASK (1 << 29) /* FCS not stripped */
+#define XTE_RXC1_RXEN_MASK (1 << 28) /* Receiver enable */
+#define XTE_RXC1_RXVLAN_MASK (1 << 27) /* VLAN enable */
+#define XTE_RXC1_RXHD_MASK (1 << 26) /* Half duplex */
+#define XTE_RXC1_RXLT_MASK (1 << 25) /* Length/type check disable */
+
+#define XTE_TXC_OFFSET 0x00000280 /* Tx configuration */
+#define XTE_TXC_TXRST_MASK (1 << 31) /* Transmitter reset */
+#define XTE_TXC_TXJMBO_MASK (1 << 30) /* Jumbo frame enable */
+#define XTE_TXC_TXFCS_MASK (1 << 29) /* Generate FCS */
+#define XTE_TXC_TXEN_MASK (1 << 28) /* Transmitter enable */
+#define XTE_TXC_TXVLAN_MASK (1 << 27) /* VLAN enable */
+#define XTE_TXC_TXHD_MASK (1 << 26) /* Half duplex */
+
+#define XTE_FCC_OFFSET 0x000002C0 /* Flow control config */
+#define XTE_FCC_RXFLO_MASK (1 << 29) /* Rx flow control enable */
+#define XTE_FCC_TXFLO_MASK (1 << 30) /* Tx flow control enable */
+
+#define XTE_EMCFG_OFFSET 0x00000300 /* EMAC configuration */
+#define XTE_EMCFG_LINKSPD_MASK 0xC0000000 /* Link speed */
+#define XTE_EMCFG_HOSTEN_MASK (1 << 26) /* Host interface enable */
+#define XTE_EMCFG_LINKSPD_10 0x00000000 /* 10 Mbit LINKSPD_MASK */
+#define XTE_EMCFG_LINKSPD_100 (1 << 30) /* 100 Mbit LINKSPD_MASK */
+#define XTE_EMCFG_LINKSPD_1000 (1 << 31) /* 1000 Mbit LINKSPD_MASK */
+
+#define XTE_GMIC_OFFSET 0x00000320 /* RGMII/SGMII config */
+#define XTE_MC_OFFSET 0x00000340 /* MDIO configuration */
+#define XTE_UAW0_OFFSET 0x00000380 /* Unicast address word 0 */
+#define XTE_UAW1_OFFSET 0x00000384 /* Unicast address word 1 */
+
+#define XTE_MAW0_OFFSET 0x00000388 /* Multicast addr word 0 */
+#define XTE_MAW1_OFFSET 0x0000038C /* Multicast addr word 1 */
+#define XTE_AFM_OFFSET 0x00000390 /* Promiscuous mode */
+#define XTE_AFM_EPPRM_MASK (1 << 31) /* Promiscuous mode enable */
+
+/* Interrupt Request status */
+#define XTE_TIS_OFFSET 0x000003A0
+#define TIS_FRIS (1 << 0)
+#define TIS_MRIS (1 << 1)
+#define TIS_MWIS (1 << 2)
+#define TIS_ARIS (1 << 3)
+#define TIS_AWIS (1 << 4)
+#define TIS_CRIS (1 << 5)
+#define TIS_CWIS (1 << 6)
+
+#define XTE_TIE_OFFSET 0x000003A4 /* Interrupt enable */
+
+/** MII Mamagement Control register (MGTCR) */
+#define XTE_MGTDR_OFFSET 0x000003B0 /* MII data */
+#define XTE_MIIMAI_OFFSET 0x000003B4 /* MII control */
+
+#define CNTLREG_WRITE_ENABLE_MASK 0x8000
+#define CNTLREG_EMAC1SEL_MASK 0x0400
+#define CNTLREG_ADDRESSCODE_MASK 0x03ff
+
+/* CDMAC descriptor status bit definitions */
+
+#define STS_CTRL_APP0_ERR (1 << 31)
+#define STS_CTRL_APP0_IRQONEND (1 << 30)
+/* undoccumented */
+#define STS_CTRL_APP0_STOPONEND (1 << 29)
+#define STS_CTRL_APP0_CMPLT (1 << 28)
+#define STS_CTRL_APP0_SOP (1 << 27)
+#define STS_CTRL_APP0_EOP (1 << 26)
+#define STS_CTRL_APP0_ENGBUSY (1 << 25)
+/* undocumented */
+#define STS_CTRL_APP0_ENGRST (1 << 24)
+
+#define TX_CONTROL_CALC_CSUM_MASK 1
+
+#define MULTICAST_CAM_TABLE_NUM 4
+
+/* TEMAC Synthesis features */
+#define TEMAC_FEATURE_RX_CSUM (1 << 0)
+#define TEMAC_FEATURE_TX_CSUM (1 << 1)
+
+/* TX/RX CURDESC_PTR points to first descriptor */
+/* TX/RX TAILDESC_PTR points to last descriptor in linked list */
+
+/**
+ * struct cdmac_bd - LocalLink buffer descriptor format
+ *
+ * app0 bits:
+ * 0 Error
+ * 1 IrqOnEnd generate an interrupt at completion of DMA op
+ * 2 reserved
+ * 3 completed Current descriptor completed
+ * 4 SOP TX - marks first desc/ RX marks first desct
+ * 5 EOP TX marks last desc/RX marks last desc
+ * 6 EngBusy DMA is processing
+ * 7 reserved
+ * 8:31 application specific
+ */
+struct cdmac_bd {
+ u32 next; /* Physical address of next buffer descriptor */
+ u32 phys;
+ u32 len;
+ u32 app0;
+ u32 app1; /* TX start << 16 | insert */
+ u32 app2; /* TX csum */
+ u32 app3;
+ u32 app4; /* skb for TX length for RX */
+};
+
+struct temac_local {
+ struct net_device *ndev;
+ struct device *dev;
+
+ /* Connection to PHY device */
+ struct phy_device *phy_dev; /* Pointer to PHY device */
+ struct device_node *phy_node;
+
+ /* MDIO bus data */
+ struct mii_bus *mii_bus; /* MII bus reference */
+ int mdio_irqs[PHY_MAX_ADDR]; /* IRQs table for MDIO bus */
+
+ /* IO registers, dma functions and IRQs */
+ void __iomem *regs;
+ void __iomem *sdma_regs;
+#ifdef CONFIG_PPC_DCR
+ dcr_host_t sdma_dcrs;
+#endif
+ u32 (*dma_in)(struct temac_local *, int);
+ void (*dma_out)(struct temac_local *, int, u32);
+
+ int tx_irq;
+ int rx_irq;
+ int emac_num;
+
+ struct sk_buff **rx_skb;
+ spinlock_t rx_lock;
+ struct mutex indirect_mutex;
+ u32 options; /* Current options word */
+ int last_link;
+ unsigned int temac_features;
+
+ /* Buffer descriptors */
+ struct cdmac_bd *tx_bd_v;
+ dma_addr_t tx_bd_p;
+ struct cdmac_bd *rx_bd_v;
+ dma_addr_t rx_bd_p;
+ int tx_bd_ci;
+ int tx_bd_next;
+ int tx_bd_tail;
+ int rx_bd_ci;
+};
+
+/* xilinx_temac.c */
+u32 temac_ior(struct temac_local *lp, int offset);
+void temac_iow(struct temac_local *lp, int offset, u32 value);
+int temac_indirect_busywait(struct temac_local *lp);
+u32 temac_indirect_in32(struct temac_local *lp, int reg);
+void temac_indirect_out32(struct temac_local *lp, int reg, u32 value);
+
+
+/* xilinx_temac_mdio.c */
+int temac_mdio_setup(struct temac_local *lp, struct device_node *np);
+void temac_mdio_teardown(struct temac_local *lp);
+
+#endif /* XILINX_LL_TEMAC_H */