summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/xilinx/xilinx_emaclite.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/xilinx/xilinx_emaclite.c')
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_emaclite.c236
1 files changed, 116 insertions, 120 deletions
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index b7268b3dae77..fd4dbdae5331 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -2,9 +2,9 @@
* Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device.
*
* This is a new flat driver which is based on the original emac_lite
- * driver from John Williams <john.williams@petalogix.com>.
+ * driver from John Williams <john.williams@xilinx.com>.
*
- * 2007-2009 (c) Xilinx, Inc.
+ * 2007 - 2013 (c) Xilinx, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -159,34 +159,32 @@ static void xemaclite_enable_interrupts(struct net_local *drvdata)
u32 reg_data;
/* Enable the Tx interrupts for the first Buffer */
- reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_TSR_OFFSET,
- reg_data | XEL_TSR_XMIT_IE_MASK);
+ reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET);
+ __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK,
+ drvdata->base_addr + XEL_TSR_OFFSET);
/* Enable the Tx interrupts for the second Buffer if
* configured in HW */
if (drvdata->tx_ping_pong != 0) {
- reg_data = in_be32(drvdata->base_addr +
+ reg_data = __raw_readl(drvdata->base_addr +
XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_TSR_OFFSET,
- reg_data | XEL_TSR_XMIT_IE_MASK);
+ __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK,
+ drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_TSR_OFFSET);
}
/* Enable the Rx interrupts for the first buffer */
- out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
- XEL_RSR_RECV_IE_MASK);
+ __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET);
/* Enable the Rx interrupts for the second Buffer if
* configured in HW */
if (drvdata->rx_ping_pong != 0) {
- out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_RSR_OFFSET,
- XEL_RSR_RECV_IE_MASK);
+ __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr +
+ XEL_BUFFER_OFFSET + XEL_RSR_OFFSET);
}
/* Enable the Global Interrupt Enable */
- out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK);
+ __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET);
}
/**
@@ -201,37 +199,37 @@ static void xemaclite_disable_interrupts(struct net_local *drvdata)
u32 reg_data;
/* Disable the Global Interrupt Enable */
- out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK);
+ __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET);
/* Disable the Tx interrupts for the first buffer */
- reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_TSR_OFFSET,
- reg_data & (~XEL_TSR_XMIT_IE_MASK));
+ reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET);
+ __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK),
+ drvdata->base_addr + XEL_TSR_OFFSET);
/* Disable the Tx interrupts for the second Buffer
* if configured in HW */
if (drvdata->tx_ping_pong != 0) {
- reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET +
XEL_TSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_TSR_OFFSET,
- reg_data & (~XEL_TSR_XMIT_IE_MASK));
+ __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK),
+ drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_TSR_OFFSET);
}
/* Disable the Rx interrupts for the first buffer */
- reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
- reg_data & (~XEL_RSR_RECV_IE_MASK));
+ reg_data = __raw_readl(drvdata->base_addr + XEL_RSR_OFFSET);
+ __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK),
+ drvdata->base_addr + XEL_RSR_OFFSET);
/* Disable the Rx interrupts for the second buffer
* if configured in HW */
if (drvdata->rx_ping_pong != 0) {
- reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET +
XEL_RSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_RSR_OFFSET,
- reg_data & (~XEL_RSR_RECV_IE_MASK));
+ __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK),
+ drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_RSR_OFFSET);
}
}
@@ -351,7 +349,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
byte_count = ETH_FRAME_LEN;
/* Check if the expected buffer is available */
- reg_data = in_be32(addr + XEL_TSR_OFFSET);
+ reg_data = __raw_readl(addr + XEL_TSR_OFFSET);
if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
XEL_TSR_XMIT_ACTIVE_MASK)) == 0) {
@@ -364,7 +362,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
addr = (void __iomem __force *)((u32 __force)addr ^
XEL_BUFFER_OFFSET);
- reg_data = in_be32(addr + XEL_TSR_OFFSET);
+ reg_data = __raw_readl(addr + XEL_TSR_OFFSET);
if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
XEL_TSR_XMIT_ACTIVE_MASK)) != 0)
@@ -375,15 +373,16 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
/* Write the frame to the buffer */
xemaclite_aligned_write(data, (u32 __force *) addr, byte_count);
- out_be32(addr + XEL_TPLR_OFFSET, (byte_count & XEL_TPLR_LENGTH_MASK));
+ __raw_writel((byte_count & XEL_TPLR_LENGTH_MASK),
+ addr + XEL_TPLR_OFFSET);
/* Update the Tx Status Register to indicate that there is a
* frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which
* is used by the interrupt handler to check whether a frame
* has been transmitted */
- reg_data = in_be32(addr + XEL_TSR_OFFSET);
+ reg_data = __raw_readl(addr + XEL_TSR_OFFSET);
reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK);
- out_be32(addr + XEL_TSR_OFFSET, reg_data);
+ __raw_writel(reg_data, addr + XEL_TSR_OFFSET);
return 0;
}
@@ -408,7 +407,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use);
/* Verify which buffer has valid data */
- reg_data = in_be32(addr + XEL_RSR_OFFSET);
+ reg_data = __raw_readl(addr + XEL_RSR_OFFSET);
if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
if (drvdata->rx_ping_pong != 0)
@@ -425,14 +424,14 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
return 0; /* No data was available */
/* Verify that buffer has valid data */
- reg_data = in_be32(addr + XEL_RSR_OFFSET);
+ reg_data = __raw_readl(addr + XEL_RSR_OFFSET);
if ((reg_data & XEL_RSR_RECV_DONE_MASK) !=
XEL_RSR_RECV_DONE_MASK)
return 0; /* No data was available */
}
/* Get the protocol type of the ethernet frame that arrived */
- proto_type = ((ntohl(in_be32(addr + XEL_HEADER_OFFSET +
+ proto_type = ((ntohl(__raw_readl(addr + XEL_HEADER_OFFSET +
XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) &
XEL_RPLR_LENGTH_MASK);
@@ -441,7 +440,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
if (proto_type == ETH_P_IP) {
- length = ((ntohl(in_be32(addr +
+ length = ((ntohl(__raw_readl(addr +
XEL_HEADER_IP_LENGTH_OFFSET +
XEL_RXBUFF_OFFSET)) >>
XEL_HEADER_SHIFT) &
@@ -463,9 +462,9 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
data, length);
/* Acknowledge the frame */
- reg_data = in_be32(addr + XEL_RSR_OFFSET);
+ reg_data = __raw_readl(addr + XEL_RSR_OFFSET);
reg_data &= ~XEL_RSR_RECV_DONE_MASK;
- out_be32(addr + XEL_RSR_OFFSET, reg_data);
+ __raw_writel(reg_data, addr + XEL_RSR_OFFSET);
return length;
}
@@ -492,14 +491,14 @@ static void xemaclite_update_address(struct net_local *drvdata,
xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN);
- out_be32(addr + XEL_TPLR_OFFSET, ETH_ALEN);
+ __raw_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET);
/* Update the MAC address in the EmacLite */
- reg_data = in_be32(addr + XEL_TSR_OFFSET);
- out_be32(addr + XEL_TSR_OFFSET, reg_data | XEL_TSR_PROG_MAC_ADDR);
+ reg_data = __raw_readl(addr + XEL_TSR_OFFSET);
+ __raw_writel(reg_data | XEL_TSR_PROG_MAC_ADDR, addr + XEL_TSR_OFFSET);
/* Wait for EmacLite to finish with the MAC address update */
- while ((in_be32(addr + XEL_TSR_OFFSET) &
+ while ((__raw_readl(addr + XEL_TSR_OFFSET) &
XEL_TSR_PROG_MAC_ADDR) != 0)
;
}
@@ -669,31 +668,32 @@ static irqreturn_t xemaclite_interrupt(int irq, void *dev_id)
u32 tx_status;
/* Check if there is Rx Data available */
- if ((in_be32(base_addr + XEL_RSR_OFFSET) & XEL_RSR_RECV_DONE_MASK) ||
- (in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET)
+ if ((__raw_readl(base_addr + XEL_RSR_OFFSET) &
+ XEL_RSR_RECV_DONE_MASK) ||
+ (__raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET)
& XEL_RSR_RECV_DONE_MASK))
xemaclite_rx_handler(dev);
/* Check if the Transmission for the first buffer is completed */
- tx_status = in_be32(base_addr + XEL_TSR_OFFSET);
+ tx_status = __raw_readl(base_addr + XEL_TSR_OFFSET);
if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
(tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {
tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
- out_be32(base_addr + XEL_TSR_OFFSET, tx_status);
+ __raw_writel(tx_status, base_addr + XEL_TSR_OFFSET);
tx_complete = true;
}
/* Check if the Transmission for the second buffer is completed */
- tx_status = in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
+ tx_status = __raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
(tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {
tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
- out_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET,
- tx_status);
+ __raw_writel(tx_status, base_addr + XEL_BUFFER_OFFSET +
+ XEL_TSR_OFFSET);
tx_complete = true;
}
@@ -726,7 +726,7 @@ static int xemaclite_mdio_wait(struct net_local *lp)
/* wait for the MDIO interface to not be busy or timeout
after some time.
*/
- while (in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET) &
+ while (__raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET) &
XEL_MDIOCTRL_MDIOSTS_MASK) {
if (end - jiffies <= 0) {
WARN_ON(1);
@@ -762,17 +762,17 @@ static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* MDIO Address register. Set the Status bit in the MDIO Control
* register to start a MDIO read transaction.
*/
- ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET);
- out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET,
- XEL_MDIOADDR_OP_MASK |
- ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg));
- out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
- ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+ ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET);
+ __raw_writel(XEL_MDIOADDR_OP_MASK |
+ ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg),
+ lp->base_addr + XEL_MDIOADDR_OFFSET);
+ __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK,
+ lp->base_addr + XEL_MDIOCTRL_OFFSET);
if (xemaclite_mdio_wait(lp))
return -ETIMEDOUT;
- rc = in_be32(lp->base_addr + XEL_MDIORD_OFFSET);
+ rc = __raw_readl(lp->base_addr + XEL_MDIORD_OFFSET);
dev_dbg(&lp->ndev->dev,
"xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n",
@@ -809,13 +809,13 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
* Data register. Finally, set the Status bit in the MDIO Control
* register to start a MDIO write transaction.
*/
- ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET);
- out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET,
- ~XEL_MDIOADDR_OP_MASK &
- ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg));
- out_be32(lp->base_addr + XEL_MDIOWR_OFFSET, val);
- out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
- ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+ ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET);
+ __raw_writel(~XEL_MDIOADDR_OP_MASK &
+ ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg),
+ lp->base_addr + XEL_MDIOADDR_OFFSET);
+ __raw_writel(val, lp->base_addr + XEL_MDIOWR_OFFSET);
+ __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK,
+ lp->base_addr + XEL_MDIOCTRL_OFFSET);
return 0;
}
@@ -848,24 +848,39 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
int rc;
struct resource res;
struct device_node *np = of_get_parent(lp->phy_node);
+ struct device_node *npp;
/* Don't register the MDIO bus if the phy_node or its parent node
* can't be found.
*/
- if (!np)
+ if (!np) {
+ dev_err(dev, "Failed to register mdio bus.\n");
return -ENODEV;
+ }
+ npp = of_get_parent(np);
+
+ of_address_to_resource(npp, 0, &res);
+ if (lp->ndev->mem_start != res.start) {
+ struct phy_device *phydev;
+ phydev = of_phy_find_device(lp->phy_node);
+ if (!phydev)
+ dev_info(dev,
+ "MDIO of the phy is not registered yet\n");
+ return 0;
+ }
/* Enable the MDIO bus by asserting the enable bit in MDIO Control
* register.
*/
- out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
- XEL_MDIOCTRL_MDIOEN_MASK);
+ __raw_writel(XEL_MDIOCTRL_MDIOEN_MASK,
+ lp->base_addr + XEL_MDIOCTRL_OFFSET);
bus = mdiobus_alloc();
- if (!bus)
+ if (!bus) {
+ dev_err(dev, "Failed to allocate mdiobus\n");
return -ENOMEM;
+ }
- of_address_to_resource(np, 0, &res);
snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
(unsigned long long)res.start);
bus->priv = lp;
@@ -879,8 +894,10 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
lp->mii_bus = bus;
rc = of_mdiobus_register(bus, np);
- if (rc)
+ if (rc) {
+ dev_err(dev, "Failed to register mdio bus.\n");
goto err_register;
+ }
return 0;
@@ -896,7 +913,7 @@ err_register:
* There's nothing in the Emaclite device to be configured when the link
* state changes. We just print the status.
*/
-void xemaclite_adjust_link(struct net_device *ndev)
+static void xemaclite_adjust_link(struct net_device *ndev)
{
struct net_local *lp = netdev_priv(ndev);
struct phy_device *phy = lp->phy_dev;
@@ -1058,13 +1075,14 @@ static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
* This function un maps the IO region of the Emaclite device and frees the net
* device.
*/
-static void xemaclite_remove_ndev(struct net_device *ndev)
+static void xemaclite_remove_ndev(struct net_device *ndev,
+ struct platform_device *pdev)
{
if (ndev) {
struct net_local *lp = netdev_priv(ndev);
if (lp->base_addr)
- iounmap((void __iomem __force *) (lp->base_addr));
+ devm_iounmap(&pdev->dev, lp->base_addr);
free_netdev(ndev);
}
}
@@ -1110,8 +1128,7 @@ static struct net_device_ops xemaclite_netdev_ops;
*/
static int xemaclite_of_probe(struct platform_device *ofdev)
{
- struct resource r_irq; /* Interrupt resources */
- struct resource r_mem; /* IO mem resources */
+ struct resource *res;
struct net_device *ndev = NULL;
struct net_local *lp = NULL;
struct device *dev = &ofdev->dev;
@@ -1121,20 +1138,6 @@ static int xemaclite_of_probe(struct platform_device *ofdev)
dev_info(dev, "Device Tree Probing\n");
- /* Get iospace for the device */
- rc = of_address_to_resource(ofdev->dev.of_node, 0, &r_mem);
- if (rc) {
- dev_err(dev, "invalid address\n");
- return rc;
- }
-
- /* Get IRQ for the device */
- rc = of_irq_to_resource(ofdev->dev.of_node, 0, &r_irq);
- if (!rc) {
- dev_err(dev, "no IRQ found\n");
- return rc;
- }
-
/* Create an ethernet device instance */
ndev = alloc_etherdev(sizeof(struct net_local));
if (!ndev)
@@ -1143,30 +1146,28 @@ static int xemaclite_of_probe(struct platform_device *ofdev)
dev_set_drvdata(dev, ndev);
SET_NETDEV_DEV(ndev, &ofdev->dev);
- ndev->irq = r_irq.start;
- ndev->mem_start = r_mem.start;
- ndev->mem_end = r_mem.end;
-
lp = netdev_priv(ndev);
lp->ndev = ndev;
- if (!request_mem_region(ndev->mem_start,
- ndev->mem_end - ndev->mem_start + 1,
- DRIVER_NAME)) {
- dev_err(dev, "Couldn't lock memory region at %p\n",
- (void *)ndev->mem_start);
- rc = -EBUSY;
- goto error2;
+ /* Get IRQ for the device */
+ res = platform_get_resource(ofdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(dev, "no IRQ found\n");
+ goto error;
}
- /* Get the virtual base address for the device */
- lp->base_addr = ioremap(r_mem.start, resource_size(&r_mem));
- if (NULL == lp->base_addr) {
- dev_err(dev, "EmacLite: Could not allocate iomem\n");
- rc = -EIO;
- goto error1;
+ ndev->irq = res->start;
+
+ res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
+ lp->base_addr = devm_ioremap_resource(&ofdev->dev, res);
+ if (IS_ERR(lp->base_addr)) {
+ rc = PTR_ERR(lp->base_addr);
+ goto error;
}
+ ndev->mem_start = res->start;
+ ndev->mem_end = res->end;
+
spin_lock_init(&lp->reset_lock);
lp->next_tx_buf_to_use = 0x0;
lp->next_rx_buf_to_use = 0x0;
@@ -1181,8 +1182,8 @@ static int xemaclite_of_probe(struct platform_device *ofdev)
dev_warn(dev, "No MAC address found\n");
/* Clear the Tx CSR's in case this is a restart */
- out_be32(lp->base_addr + XEL_TSR_OFFSET, 0);
- out_be32(lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET, 0);
+ __raw_writel(0, lp->base_addr + XEL_TSR_OFFSET);
+ __raw_writel(0, lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
/* Set the MAC address in the EmacLite device */
xemaclite_update_address(lp, ndev->dev_addr);
@@ -1203,7 +1204,7 @@ static int xemaclite_of_probe(struct platform_device *ofdev)
if (rc) {
dev_err(dev,
"Cannot register network device, aborting\n");
- goto error1;
+ goto error;
}
dev_info(dev,
@@ -1212,11 +1213,8 @@ static int xemaclite_of_probe(struct platform_device *ofdev)
(unsigned int __force)lp->base_addr, ndev->irq);
return 0;
-error1:
- release_mem_region(ndev->mem_start, resource_size(&r_mem));
-
-error2:
- xemaclite_remove_ndev(ndev);
+error:
+ xemaclite_remove_ndev(ndev, ofdev);
return rc;
}
@@ -1251,9 +1249,7 @@ static int xemaclite_of_remove(struct platform_device *of_dev)
of_node_put(lp->phy_node);
lp->phy_node = NULL;
- release_mem_region(ndev->mem_start, ndev->mem_end-ndev->mem_start + 1);
-
- xemaclite_remove_ndev(ndev);
+ xemaclite_remove_ndev(ndev, of_dev);
dev_set_drvdata(dev, NULL);
return 0;
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 22:49:06 +0000