diff options
Diffstat (limited to 'drivers/net/ethernet')
| -rw-r--r-- | drivers/net/ethernet/i825xx/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/net/ethernet/i825xx/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/i825xx/znet.c | 928 |
3 files changed, 0 insertions, 939 deletions
diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig index 16b14a93c205..c3cfa576cdea 100644 --- a/drivers/net/ethernet/i825xx/Kconfig +++ b/drivers/net/ethernet/i825xx/Kconfig @@ -79,14 +79,4 @@ config SUN3_82586 that this driver does not support 82586-based adapters on additional VME boards. -config ZNET - tristate "Zenith Z-Note support (EXPERIMENTAL)" - depends on EXPERIMENTAL && ISA_DMA_API && X86 - ---help--- - The Zenith Z-Note notebook computer has a built-in network - (Ethernet) card, and this is the Linux driver for it. Note that the - IBM Thinkpad 300 is compatible with the Z-Note and is also supported - by this driver. Read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - endif # NET_VENDOR_I825XX diff --git a/drivers/net/ethernet/i825xx/Makefile b/drivers/net/ethernet/i825xx/Makefile index 4267ae72c5d2..df9e2ecdc636 100644 --- a/drivers/net/ethernet/i825xx/Makefile +++ b/drivers/net/ethernet/i825xx/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_ARM_ETHER1) += ether1.o obj-$(CONFIG_NI52) += ni52.o obj-$(CONFIG_SUN3_82586) += sun3_82586.o -obj-$(CONFIG_ZNET) += znet.o obj-$(CONFIG_LASI_82596) += lasi_82596.o obj-$(CONFIG_SNI_82596) += sni_82596.o obj-$(CONFIG_MVME16x_NET) += 82596.o diff --git a/drivers/net/ethernet/i825xx/znet.c b/drivers/net/ethernet/i825xx/znet.c deleted file mode 100644 index c9479e081b8a..000000000000 --- a/drivers/net/ethernet/i825xx/znet.c +++ /dev/null @@ -1,928 +0,0 @@ -/* znet.c: An Zenith Z-Note ethernet driver for linux. */ - -/* - Written by Donald Becker. - - The author may be reached as becker@scyld.com. - This driver is based on the Linux skeleton driver. The copyright of the - skeleton driver is held by the United States Government, as represented - by DIRNSA, and it is released under the GPL. - - Thanks to Mike Hollick for alpha testing and suggestions. - - References: - The Crynwr packet driver. - - "82593 CSMA/CD Core LAN Controller" Intel datasheet, 1992 - Intel Microcommunications Databook, Vol. 1, 1990. - As usual with Intel, the documentation is incomplete and inaccurate. - I had to read the Crynwr packet driver to figure out how to actually - use the i82593, and guess at what register bits matched the loosely - related i82586. - - Theory of Operation - - The i82593 used in the Zenith Z-Note series operates using two(!) slave - DMA channels, one interrupt, and one 8-bit I/O port. - - While there several ways to configure '593 DMA system, I chose the one - that seemed commensurate with the highest system performance in the face - of moderate interrupt latency: Both DMA channels are configured as - recirculating ring buffers, with one channel (#0) dedicated to Rx and - the other channel (#1) to Tx and configuration. (Note that this is - different than the Crynwr driver, where the Tx DMA channel is initialized - before each operation. That approach simplifies operation and Tx error - recovery, but requires additional I/O in normal operation and precludes - transmit buffer chaining.) - - Both rings are set to 8192 bytes using {TX,RX}_RING_SIZE. This provides - a reasonable ring size for Rx, while simplifying DMA buffer allocation -- - DMA buffers must not cross a 128K boundary. (In truth the size selection - was influenced by my lack of '593 documentation. I thus was constrained - to use the Crynwr '593 initialization table, which sets the Rx ring size - to 8K.) - - Despite my usual low opinion about Intel-designed parts, I must admit - that the bulk data handling of the i82593 is a good design for - an integrated system, like a laptop, where using two slave DMA channels - doesn't pose a problem. I still take issue with using only a single I/O - port. In the same controlled environment there are essentially no - limitations on I/O space, and using multiple locations would eliminate - the need for multiple operations when looking at status registers, - setting the Rx ring boundary, or switching to promiscuous mode. - - I also question Zenith's selection of the '593: one of the advertised - advantages of earlier Intel parts was that if you figured out the magic - initialization incantation you could use the same part on many different - network types. Zenith's use of the "FriendlyNet" (sic) connector rather - than an on-board transceiver leads me to believe that they were planning - to take advantage of this. But, uhmmm, the '593 omits all but ethernet - functionality from the serial subsystem. - */ - -/* 10/2002 - - o Resurected for Linux 2.5+ by Marc Zyngier <maz@wild-wind.fr.eu.org> : - - - Removed strange DMA snooping in znet_sent_packet, which lead to - TX buffer corruption on my laptop. - - Use init_etherdev stuff. - - Use kmalloc-ed DMA buffers. - - Use as few global variables as possible. - - Use proper resources management. - - Use wireless/i82593.h as much as possible (structure, constants) - - Compiles as module or build-in. - - Now survives unplugging/replugging cable. - - Some code was taken from wavelan_cs. - - Tested on a vintage Zenith Z-Note 433Lnp+. Probably broken on - anything else. Testers (and detailed bug reports) are welcome :-). - - o TODO : - - - Properly handle multicast - - Understand why some traffic patterns add a 1s latency... - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/if_arp.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/dma.h> - -#include <linux/i82593.h> - -static char version[] __initdata = "znet.c:v1.02 9/23/94 becker@scyld.com\n"; - -#ifndef ZNET_DEBUG -#define ZNET_DEBUG 1 -#endif -static unsigned int znet_debug = ZNET_DEBUG; -module_param (znet_debug, int, 0); -MODULE_PARM_DESC (znet_debug, "ZNet debug level"); -MODULE_LICENSE("GPL"); - -/* The DMA modes we need aren't in <dma.h>. */ -#define DMA_RX_MODE 0x14 /* Auto init, I/O to mem, ++, demand. */ -#define DMA_TX_MODE 0x18 /* Auto init, Mem to I/O, ++, demand. */ -#define dma_page_eq(ptr1, ptr2) ((long)(ptr1)>>17 == (long)(ptr2)>>17) -#define RX_BUF_SIZE 8192 -#define TX_BUF_SIZE 8192 -#define DMA_BUF_SIZE (RX_BUF_SIZE + 16) /* 8k + 16 bytes for trailers */ - -#define TX_TIMEOUT (HZ/10) - -struct znet_private { - int rx_dma, tx_dma; - spinlock_t lock; - short sia_base, sia_size, io_size; - struct i82593_conf_block i593_init; - /* The starting, current, and end pointers for the packet buffers. */ - ushort *rx_start, *rx_cur, *rx_end; - ushort *tx_start, *tx_cur, *tx_end; - ushort tx_buf_len; /* Tx buffer length, in words. */ -}; - -/* Only one can be built-in;-> */ -static struct net_device *znet_dev; - -#define NETIDBLK_MAGIC "NETIDBLK" -#define NETIDBLK_MAGIC_SIZE 8 - -struct netidblk { - char magic[NETIDBLK_MAGIC_SIZE]; /* The magic number (string) "NETIDBLK" */ - unsigned char netid[8]; /* The physical station address */ - char nettype, globalopt; - char vendor[8]; /* The machine vendor and product name. */ - char product[8]; - char irq1, irq2; /* Interrupts, only one is currently used. */ - char dma1, dma2; - short dma_mem_misc[8]; /* DMA buffer locations (unused in Linux). */ - short iobase1, iosize1; - short iobase2, iosize2; /* Second iobase unused. */ - char driver_options; /* Misc. bits */ - char pad; -}; - -static int znet_open(struct net_device *dev); -static netdev_tx_t znet_send_packet(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t znet_interrupt(int irq, void *dev_id); -static void znet_rx(struct net_device *dev); -static int znet_close(struct net_device *dev); -static void hardware_init(struct net_device *dev); -static void update_stop_hit(short ioaddr, unsigned short rx_stop_offset); -static void znet_tx_timeout (struct net_device *dev); - -/* Request needed resources */ -static int znet_request_resources (struct net_device *dev) -{ - struct znet_private *znet = netdev_priv(dev); - - if (request_irq (dev->irq, znet_interrupt, 0, "ZNet", dev)) - goto failed; - if (request_dma (znet->rx_dma, "ZNet rx")) - goto free_irq; - if (request_dma (znet->tx_dma, "ZNet tx")) - goto free_rx_dma; - if (!request_region (znet->sia_base, znet->sia_size, "ZNet SIA")) - goto free_tx_dma; - if (!request_region (dev->base_addr, znet->io_size, "ZNet I/O")) - goto free_sia; - - return 0; /* Happy ! */ - - free_sia: - release_region (znet->sia_base, znet->sia_size); - free_tx_dma: - free_dma (znet->tx_dma); - free_rx_dma: - free_dma (znet->rx_dma); - free_irq: - free_irq (dev->irq, dev); - failed: - return -1; -} - -static void znet_release_resources (struct net_device *dev) -{ - struct znet_private *znet = netdev_priv(dev); - - release_region (znet->sia_base, znet->sia_size); - release_region (dev->base_addr, znet->io_size); - free_dma (znet->tx_dma); - free_dma (znet->rx_dma); - free_irq (dev->irq, dev); -} - -/* Keep the magical SIA stuff in a single function... */ -static void znet_transceiver_power (struct net_device *dev, int on) -{ - struct znet_private *znet = netdev_priv(dev); - unsigned char v; - - /* Turn on/off the 82501 SIA, using zenith-specific magic. */ - /* Select LAN control register */ - outb(0x10, znet->sia_base); - - if (on) - v = inb(znet->sia_base + 1) | 0x84; - else - v = inb(znet->sia_base + 1) & ~0x84; - - outb(v, znet->sia_base+1); /* Turn on/off LAN power (bit 2). */ -} - -/* Init the i82593, with current promisc/mcast configuration. - Also used from hardware_init. */ -static void znet_set_multicast_list (struct net_device *dev) -{ - struct znet_private *znet = netdev_priv(dev); - short ioaddr = dev->base_addr; - struct i82593_conf_block *cfblk = &znet->i593_init; - - memset(cfblk, 0x00, sizeof(struct i82593_conf_block)); - - /* The configuration block. What an undocumented nightmare. - The first set of values are those suggested (without explanation) - for ethernet in the Intel 82586 databook. The rest appear to be - completely undocumented, except for cryptic notes in the Crynwr - packet driver. This driver uses the Crynwr values verbatim. */ - - /* maz : Rewritten to take advantage of the wanvelan includes. - At least we have names, not just blind values */ - - /* Byte 0 */ - cfblk->fifo_limit = 10; /* = 16 B rx and 80 B tx fifo thresholds */ - cfblk->forgnesi = 0; /* 0=82C501, 1=AMD7992B compatibility */ - cfblk->fifo_32 = 1; - cfblk->d6mod = 0; /* Run in i82593 advanced mode */ - cfblk->throttle_enb = 1; - - /* Byte 1 */ - cfblk->throttle = 8; /* Continuous w/interrupts, 128-clock DMA. */ - cfblk->cntrxint = 0; /* enable continuous mode receive interrupts */ - cfblk->contin = 1; /* enable continuous mode */ - - /* Byte 2 */ - cfblk->addr_len = ETH_ALEN; - cfblk->acloc = 1; /* Disable source addr insertion by i82593 */ - cfblk->preamb_len = 2; /* 8 bytes preamble */ - cfblk->loopback = 0; /* Loopback off */ - - /* Byte 3 */ - cfblk->lin_prio = 0; /* Default priorities & backoff methods. */ - cfblk->tbofstop = 0; - cfblk->exp_prio = 0; - cfblk->bof_met = 0; - - /* Byte 4 */ - cfblk->ifrm_spc = 6; /* 96 bit times interframe spacing */ - - /* Byte 5 */ - cfblk->slottim_low = 0; /* 512 bit times slot time (low) */ - - /* Byte 6 */ - cfblk->slottim_hi = 2; /* 512 bit times slot time (high) */ - cfblk->max_retr = 15; /* 15 collisions retries */ - - /* Byte 7 */ - cfblk->prmisc = ((dev->flags & IFF_PROMISC) ? 1 : 0); /* Promiscuous mode */ - cfblk->bc_dis = 0; /* Enable broadcast reception */ - cfblk->crs_1 = 0; /* Don't transmit without carrier sense */ - cfblk->nocrc_ins = 0; /* i82593 generates CRC */ - cfblk->crc_1632 = 0; /* 32-bit Autodin-II CRC */ - cfblk->crs_cdt = 0; /* CD not to be interpreted as CS */ - - /* Byte 8 */ - cfblk->cs_filter = 0; /* CS is recognized immediately */ - cfblk->crs_src = 0; /* External carrier sense */ - cfblk->cd_filter = 0; /* CD is recognized immediately */ - - /* Byte 9 */ - cfblk->min_fr_len = ETH_ZLEN >> 2; /* Minimum frame length */ - - /* Byte A */ - cfblk->lng_typ = 1; /* Type/length checks OFF */ - cfblk->lng_fld = 1; /* Disable 802.3 length field check */ - cfblk->rxcrc_xf = 1; /* Don't transfer CRC to memory */ - cfblk->artx = 1; /* Disable automatic retransmission */ - cfblk->sarec = 1; /* Disable source addr trig of CD */ - cfblk->tx_jabber = 0; /* Disable jabber jam sequence */ - cfblk->hash_1 = 1; /* Use bits 0-5 in mc address hash */ - cfblk->lbpkpol = 0; /* Loopback pin active high */ - - /* Byte B */ - cfblk->fdx = 0; /* Disable full duplex operation */ - - /* Byte C */ - cfblk->dummy_6 = 0x3f; /* all ones, Default multicast addresses & backoff. */ - cfblk->mult_ia = 0; /* No multiple individual addresses */ - cfblk->dis_bof = 0; /* Disable the backoff algorithm ?! */ - - /* Byte D */ - cfblk->dummy_1 = 1; /* set to 1 */ - cfblk->tx_ifs_retrig = 3; /* Hmm... Disabled */ - cfblk->mc_all = (!netdev_mc_empty(dev) || - (dev->flags & IFF_ALLMULTI)); /* multicast all mode */ - cfblk->rcv_mon = 0; /* Monitor mode disabled */ - cfblk->frag_acpt = 0; /* Do not accept fragments */ - cfblk->tstrttrs = 0; /* No start transmission threshold */ - - /* Byte E */ - cfblk->fretx = 1; /* FIFO automatic retransmission */ - cfblk->runt_eop = 0; /* drop "runt" packets */ - cfblk->hw_sw_pin = 0; /* ?? */ - cfblk->big_endn = 0; /* Big Endian ? no... */ - cfblk->syncrqs = 1; /* Synchronous DRQ deassertion... */ - cfblk->sttlen = 1; /* 6 byte status registers */ - cfblk->rx_eop = 0; /* Signal EOP on packet reception */ - cfblk->tx_eop = 0; /* Signal EOP on packet transmission */ - - /* Byte F */ - cfblk->rbuf_size = RX_BUF_SIZE >> 12; /* Set receive buffer size */ - cfblk->rcvstop = 1; /* Enable Receive Stop Register */ - - if (znet_debug > 2) { - int i; - unsigned char *c; - - for (i = 0, c = (char *) cfblk; i < sizeof (*cfblk); i++) - printk ("%02X ", c[i]); - printk ("\n"); - } - - *znet->tx_cur++ = sizeof(struct i82593_conf_block); - memcpy(znet->tx_cur, cfblk, sizeof(struct i82593_conf_block)); - znet->tx_cur += sizeof(struct i82593_conf_block)/2; - outb(OP0_CONFIGURE | CR0_CHNL, ioaddr); - - /* XXX FIXME maz : Add multicast addresses here, so having a - * multicast address configured isn't equal to IFF_ALLMULTI */ -} - -static const struct net_device_ops znet_netdev_ops = { - .ndo_open = znet_open, - .ndo_stop = znet_close, - .ndo_start_xmit = znet_send_packet, - .ndo_set_rx_mode = znet_set_multicast_list, - .ndo_tx_timeout = znet_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/* The Z-Note probe is pretty easy. The NETIDBLK exists in the safe-to-probe - BIOS area. We just scan for the signature, and pull the vital parameters - out of the structure. */ - -static int __init znet_probe (void) -{ - int i; - struct netidblk *netinfo; - struct znet_private *znet; - struct net_device *dev; - char *p; - char *plast = phys_to_virt(0x100000 - NETIDBLK_MAGIC_SIZE); - int err = -ENOMEM; - - /* This code scans the region 0xf0000 to 0xfffff for a "NETIDBLK". */ - for(p = (char *)phys_to_virt(0xf0000); p <= plast; p++) - if (*p == 'N' && - strncmp(p, NETIDBLK_MAGIC, NETIDBLK_MAGIC_SIZE) == 0) - break; - - if (p > plast) { - if (znet_debug > 1) - printk(KERN_INFO "No Z-Note ethernet adaptor found.\n"); - return -ENODEV; - } - - dev = alloc_etherdev(sizeof(struct znet_private)); - if (!dev) - return -ENOMEM; - - znet = netdev_priv(dev); - - netinfo = (struct netidblk *)p; - dev->base_addr = netinfo->iobase1; - dev->irq = netinfo->irq1; - - /* The station address is in the "netidblk" at 0x0f0000. */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = netinfo->netid[i]; - - printk(KERN_INFO "%s: ZNET at %#3lx, %pM" - ", using IRQ %d DMA %d and %d.\n", - dev->name, dev->base_addr, dev->dev_addr, - dev->irq, netinfo->dma1, netinfo->dma2); - - if (znet_debug > 1) { - printk(KERN_INFO "%s: vendor '%16.16s' IRQ1 %d IRQ2 %d DMA1 %d DMA2 %d.\n", - dev->name, netinfo->vendor, - netinfo->irq1, netinfo->irq2, - netinfo->dma1, netinfo->dma2); - printk(KERN_INFO "%s: iobase1 %#x size %d iobase2 %#x size %d net type %2.2x.\n", - dev->name, netinfo->iobase1, netinfo->iosize1, - netinfo->iobase2, netinfo->iosize2, netinfo->nettype); - } - - if (znet_debug > 0) - printk(KERN_INFO "%s", version); - - znet->rx_dma = netinfo->dma1; - znet->tx_dma = netinfo->dma2; - spin_lock_init(&znet->lock); - znet->sia_base = 0xe6; /* Magic address for the 82501 SIA */ - znet->sia_size = 2; - /* maz: Despite the '593 being advertised above as using a - * single 8bits I/O port, this driver does many 16bits - * access. So set io_size accordingly */ - znet->io_size = 2; - - if (!(znet->rx_start = kmalloc (DMA_BUF_SIZE, GFP_KERNEL | GFP_DMA))) - goto free_dev; - if (!(znet->tx_start = kmalloc (DMA_BUF_SIZE, GFP_KERNEL | GFP_DMA))) - goto free_rx; - - if (!dma_page_eq (znet->rx_start, znet->rx_start + (RX_BUF_SIZE/2-1)) || - !dma_page_eq (znet->tx_start, znet->tx_start + (TX_BUF_SIZE/2-1))) { - printk (KERN_WARNING "tx/rx crossing DMA frontiers, giving up\n"); - goto free_tx; - } - - znet->rx_end = znet->rx_start + RX_BUF_SIZE/2; - znet->tx_buf_len = TX_BUF_SIZE/2; - znet->tx_end = znet->tx_start + znet->tx_buf_len; - - /* The ZNET-specific entries in the device structure. */ - dev->netdev_ops = &znet_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - err = register_netdev(dev); - if (err) - goto free_tx; - znet_dev = dev; - return 0; - - free_tx: - kfree(znet->tx_start); - free_rx: - kfree(znet->rx_start); - free_dev: - free_netdev(dev); - return err; -} - - -static int znet_open(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - if (znet_debug > 2) - printk(KERN_DEBUG "%s: znet_open() called.\n", dev->name); - - /* These should never fail. You can't add devices to a sealed box! */ - if (znet_request_resources (dev)) { - printk(KERN_WARNING "%s: Not opened -- resource busy?!?\n", dev->name); - return -EBUSY; - } - - znet_transceiver_power (dev, 1); - - /* According to the Crynwr driver we should wait 50 msec. for the - LAN clock to stabilize. My experiments indicates that the '593 can - be initialized immediately. The delay is probably needed for the - DC-to-DC converter to come up to full voltage, and for the oscillator - to be spot-on at 20Mhz before transmitting. - Until this proves to be a problem we rely on the higher layers for the - delay and save allocating a timer entry. */ - - /* maz : Well, I'm getting every time the following message - * without the delay on a 486@33. This machine is much too - * fast... :-) So maybe the Crynwr driver wasn't wrong after - * all, even if the message is completly harmless on my - * setup. */ - mdelay (50); - - /* This follows the packet driver's lead, and checks for success. */ - if (inb(ioaddr) != 0x10 && inb(ioaddr) != 0x00) - printk(KERN_WARNING "%s: Problem turning on the transceiver power.\n", - dev->name); - - hardware_init(dev); - netif_start_queue (dev); - - return 0; -} - - -static void znet_tx_timeout (struct net_device *dev) -{ - int ioaddr = dev->base_addr; - ushort event, tx_status, rx_offset, state; - - outb (CR0_STATUS_0, ioaddr); - event = inb (ioaddr); - outb (CR0_STATUS_1, ioaddr); - tx_status = inw (ioaddr); - outb (CR0_STATUS_2, ioaddr); - rx_offset = inw (ioaddr); - outb (CR0_STATUS_3, ioaddr); - state = inb (ioaddr); - printk (KERN_WARNING "%s: transmit timed out, status %02x %04x %04x %02x," - " resetting.\n", dev->name, event, tx_status, rx_offset, state); - if (tx_status == TX_LOST_CRS) - printk (KERN_WARNING "%s: Tx carrier error, check transceiver cable.\n", - dev->name); - outb (OP0_RESET, ioaddr); - hardware_init (dev); - netif_wake_queue (dev); -} - -static netdev_tx_t znet_send_packet(struct sk_buff *skb, struct net_device *dev) -{ - int ioaddr = dev->base_addr; - struct znet_private *znet = netdev_priv(dev); - unsigned long flags; - short length = skb->len; - - if (znet_debug > 4) - printk(KERN_DEBUG "%s: ZNet_send_packet.\n", dev->name); - - if (length < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - - netif_stop_queue (dev); - - /* Check that the part hasn't reset itself, probably from suspend. */ - outb(CR0_STATUS_0, ioaddr); - if (inw(ioaddr) == 0x0010 && - inw(ioaddr) == 0x0000 && - inw(ioaddr) == 0x0010) { - if (znet_debug > 1) - printk (KERN_WARNING "%s : waking up\n", dev->name); - hardware_init(dev); - znet_transceiver_power (dev, 1); - } - - if (1) { - unsigned char *buf = (void *)skb->data; - ushort *tx_link = znet->tx_cur - 1; - ushort rnd_len = (length + 1)>>1; - - dev->stats.tx_bytes+=length; - - if (znet->tx_cur >= znet->tx_end) - znet->tx_cur = znet->tx_start; - *znet->tx_cur++ = length; - if (znet->tx_cur + rnd_len + 1 > znet->tx_end) { - int semi_cnt = (znet->tx_end - znet->tx_cur)<<1; /* Cvrt to byte cnt. */ - memcpy(znet->tx_cur, buf, semi_cnt); - rnd_len -= semi_cnt>>1; - memcpy(znet->tx_start, buf + semi_cnt, length - semi_cnt); - znet->tx_cur = znet->tx_start + rnd_len; - } else { - memcpy(znet->tx_cur, buf, skb->len); - znet->tx_cur += rnd_len; - } - *znet->tx_cur++ = 0; - - spin_lock_irqsave(&znet->lock, flags); - { - *tx_link = OP0_TRANSMIT | CR0_CHNL; - /* Is this always safe to do? */ - outb(OP0_TRANSMIT | CR0_CHNL, ioaddr); - } - spin_unlock_irqrestore (&znet->lock, flags); - - netif_start_queue (dev); - - if (znet_debug > 4) - printk(KERN_DEBUG "%s: Transmitter queued, length %d.\n", dev->name, length); - } - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -/* The ZNET interrupt handler. */ -static irqreturn_t znet_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct znet_private *znet = netdev_priv(dev); - int ioaddr; - int boguscnt = 20; - int handled = 0; - - spin_lock (&znet->lock); - - ioaddr = dev->base_addr; - - outb(CR0_STATUS_0, ioaddr); - do { - ushort status = inb(ioaddr); - if (znet_debug > 5) { - ushort result, rx_ptr, running; - outb(CR0_STATUS_1, ioaddr); - result = inw(ioaddr); - outb(CR0_STATUS_2, ioaddr); - rx_ptr = inw(ioaddr); - outb(CR0_STATUS_3, ioaddr); - running = inb(ioaddr); - printk(KERN_DEBUG "%s: interrupt, status %02x, %04x %04x %02x serial %d.\n", - dev->name, status, result, rx_ptr, running, boguscnt); - } - if ((status & SR0_INTERRUPT) == 0) - break; - - handled = 1; - - if ((status & SR0_EVENT_MASK) == SR0_TRANSMIT_DONE || - (status & SR0_EVENT_MASK) == SR0_RETRANSMIT_DONE || - (status & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE) { - int tx_status; - outb(CR0_STATUS_1, ioaddr); - tx_status = inw(ioaddr); - /* It's undocumented, but tx_status seems to match the i82586. */ - if (tx_status & TX_OK) { - dev->stats.tx_packets++; - dev->stats.collisions += tx_status & TX_NCOL_MASK; - } else { - if (tx_status & (TX_LOST_CTS | TX_LOST_CRS)) - dev->stats.tx_carrier_errors++; - if (tx_status & TX_UND_RUN) - dev->stats.tx_fifo_errors++; - if (!(tx_status & TX_HRT_BEAT)) - dev->stats.tx_heartbeat_errors++; - if (tx_status & TX_MAX_COL) - dev->stats.tx_aborted_errors++; - /* ...and the catch-all. */ - if ((tx_status | (TX_LOST_CRS | TX_LOST_CTS | TX_UND_RUN | TX_HRT_BEAT | TX_MAX_COL)) != (TX_LOST_CRS | TX_LOST_CTS | TX_UND_RUN | TX_HRT_BEAT | TX_MAX_COL)) - dev->stats.tx_errors++; - - /* Transceiver may be stuck if cable - * was removed while emitting a - * packet. Flip it off, then on to - * reset it. This is very empirical, - * but it seems to work. */ - - znet_transceiver_power (dev, 0); - znet_transceiver_power (dev, 1); - } - netif_wake_queue (dev); - } - - if ((status & SR0_RECEPTION) || - (status & SR0_EVENT_MASK) == SR0_STOP_REG_HIT) { - znet_rx(dev); - } - /* Clear the interrupts we've handled. */ - outb(CR0_INT_ACK, ioaddr); - } while (boguscnt--); - - spin_unlock (&znet->lock); - - return IRQ_RETVAL(handled); -} - -static void znet_rx(struct net_device *dev) -{ - struct znet_private *znet = netdev_priv(dev); - int ioaddr = dev->base_addr; - int boguscount = 1; - short next_frame_end_offset = 0; /* Offset of next frame start. */ - short *cur_frame_end; - short cur_frame_end_offset; - - outb(CR0_STATUS_2, ioaddr); - cur_frame_end_offset = inw(ioaddr); - - if (cur_frame_end_offset == znet->rx_cur - znet->rx_start) { - printk(KERN_WARNING "%s: Interrupted, but nothing to receive, offset %03x.\n", - dev->name, cur_frame_end_offset); - return; - } - - /* Use same method as the Crynwr driver: construct a forward list in - the same area of the backwards links we now have. This allows us to - pass packets to the upper layers in the order they were received -- - important for fast-path sequential operations. */ - while (znet->rx_start + cur_frame_end_offset != znet->rx_cur && - ++boguscount < 5) { - unsigned short hi_cnt, lo_cnt, hi_status, lo_status; - int count, status; - - if (cur_frame_end_offset < 4) { - /* Oh no, we have a special case: the frame trailer wraps around - the end of the ring buffer. We've saved space at the end of - the ring buffer for just this problem. */ - memcpy(znet->rx_end, znet->rx_start, 8); - cur_frame_end_offset += (RX_BUF_SIZE/2); - } - cur_frame_end = znet->rx_start + cur_frame_end_offset - 4; - - lo_status = *cur_frame_end++; - hi_status = *cur_frame_end++; - status = ((hi_status & 0xff) << 8) + (lo_status & 0xff); - lo_cnt = *cur_frame_end++; - hi_cnt = *cur_frame_end++; - count = ((hi_cnt & 0xff) << 8) + (lo_cnt & 0xff); - - if (znet_debug > 5) - printk(KERN_DEBUG "Constructing trailer at location %03x, %04x %04x %04x %04x" - " count %#x status %04x.\n", - cur_frame_end_offset<<1, lo_status, hi_status, lo_cnt, hi_cnt, - count, status); - cur_frame_end[-4] = status; - cur_frame_end[-3] = next_frame_end_offset; - cur_frame_end[-2] = count; - next_frame_end_offset = cur_frame_end_offset; - cur_frame_end_offset -= ((count + 1)>>1) + 3; - if (cur_frame_end_offset < 0) - cur_frame_end_offset += RX_BUF_SIZE/2; - } - - /* Now step forward through the list. */ - do { - ushort *this_rfp_ptr = znet->rx_start + next_frame_end_offset; - int status = this_rfp_ptr[-4]; - int pkt_len = this_rfp_ptr[-2]; - - if (znet_debug > 5) - printk(KERN_DEBUG "Looking at trailer ending at %04x status %04x length %03x" - " next %04x.\n", next_frame_end_offset<<1, status, pkt_len, - this_rfp_ptr[-3]<<1); - /* Once again we must assume that the i82586 docs apply. */ - if ( ! (status & RX_RCV_OK)) { /* There was an error. */ - dev->stats.rx_errors++; - if (status & RX_CRC_ERR) dev->stats.rx_crc_errors++; - if (status & RX_ALG_ERR) dev->stats.rx_frame_errors++; -#if 0 - if (status & 0x0200) dev->stats.rx_over_errors++; /* Wrong. */ - if (status & 0x0100) dev->stats.rx_fifo_errors++; -#else - /* maz : Wild guess... */ - if (status & RX_OVRRUN) dev->stats.rx_over_errors++; -#endif - if (status & RX_SRT_FRM) dev->stats.rx_length_errors++; - } else if (pkt_len > 1536) { - dev->stats.rx_length_errors++; - } else { - /* Malloc up new buffer. */ - struct sk_buff *skb; - - skb = netdev_alloc_skb(dev, pkt_len); - if (skb == NULL) { - if (znet_debug) - printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - break; - } - - if (&znet->rx_cur[(pkt_len+1)>>1] > znet->rx_end) { - int semi_cnt = (znet->rx_end - znet->rx_cur)<<1; - memcpy(skb_put(skb,semi_cnt), znet->rx_cur, semi_cnt); - memcpy(skb_put(skb,pkt_len-semi_cnt), znet->rx_start, - pkt_len - semi_cnt); - } else { - memcpy(skb_put(skb,pkt_len), znet->rx_cur, pkt_len); - if (znet_debug > 6) { - unsigned int *packet = (unsigned int *) skb->data; - printk(KERN_DEBUG "Packet data is %08x %08x %08x %08x.\n", packet[0], - packet[1], packet[2], packet[3]); - } - } - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - znet->rx_cur = this_rfp_ptr; - if (znet->rx_cur >= znet->rx_end) - znet->rx_cur -= RX_BUF_SIZE/2; - update_stop_hit(ioaddr, (znet->rx_cur - znet->rx_start)<<1); - next_frame_end_offset = this_rfp_ptr[-3]; - if (next_frame_end_offset == 0) /* Read all the frames? */ - break; /* Done for now */ - this_rfp_ptr = znet->rx_start + next_frame_end_offset; - } while (--boguscount); - - /* If any worth-while packets have been received, dev_rint() - has done a mark_bh(INET_BH) for us and will work on them - when we get to the bottom-half routine. */ -} - -/* The inverse routine to znet_open(). */ -static int znet_close(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - netif_stop_queue (dev); - - outb(OP0_RESET, ioaddr); /* CMD0_RESET */ - - if (znet_debug > 1) - printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name); - /* Turn off transceiver power. */ - znet_transceiver_power (dev, 0); - - znet_release_resources (dev); - - return 0; -} - -static void show_dma(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - unsigned char stat = inb (ioaddr); - struct znet_private *znet = netdev_priv(dev); - unsigned long flags; - short dma_port = ((znet->tx_dma&3)<<2) + IO_DMA2_BASE; - unsigned addr = inb(dma_port); - short residue; - - addr |= inb(dma_port) << 8; - residue = get_dma_residue(znet->tx_dma); - - if (znet_debug > 1) { - flags=claim_dma_lock(); - printk(KERN_DEBUG "Stat:%02x Addr: %04x cnt:%3x\n", - stat, addr<<1, residue); - release_dma_lock(flags); - } -} - -/* Initialize the hardware. We have to do this when the board is open()ed - or when we come out of suspend mode. */ -static void hardware_init(struct net_device *dev) -{ - unsigned long flags; - short ioaddr = dev->base_addr; - struct znet_private *znet = netdev_priv(dev); - - znet->rx_cur = znet->rx_start; - znet->tx_cur = znet->tx_start; - - /* Reset the chip, and start it up. */ - outb(OP0_RESET, ioaddr); - - flags=claim_dma_lock(); - disable_dma(znet->rx_dma); /* reset by an interrupting task. */ - clear_dma_ff(znet->rx_dma); - set_dma_mode(znet->rx_dma, DMA_RX_MODE); - set_dma_addr(znet->rx_dma, isa_virt_to_bus(znet->rx_start)); - set_dma_count(znet->rx_dma, RX_BUF_SIZE); - enable_dma(znet->rx_dma); - /* Now set up the Tx channel. */ - disable_dma(znet->tx_dma); - clear_dma_ff(znet->tx_dma); - set_dma_mode(znet->tx_dma, DMA_TX_MODE); - set_dma_addr(znet->tx_dma, isa_virt_to_bus(znet->tx_start)); - set_dma_count(znet->tx_dma, znet->tx_buf_len<<1); - enable_dma(znet->tx_dma); - release_dma_lock(flags); - - if (znet_debug > 1) - printk(KERN_DEBUG "%s: Initializing the i82593, rx buf %p tx buf %p\n", - dev->name, znet->rx_start,znet->tx_start); - /* Do an empty configure command, just like the Crynwr driver. This - resets to chip to its default values. */ - *znet->tx_cur++ = 0; - *znet->tx_cur++ = 0; - show_dma(dev); - outb(OP0_CONFIGURE | CR0_CHNL, ioaddr); - - znet_set_multicast_list (dev); - - *znet->tx_cur++ = 6; - memcpy(znet->tx_cur, dev->dev_addr, 6); - znet->tx_cur += 3; - show_dma(dev); - outb(OP0_IA_SETUP | CR0_CHNL, ioaddr); - show_dma(dev); - - update_stop_hit(ioaddr, 8192); - if (znet_debug > 1) printk(KERN_DEBUG "enabling Rx.\n"); - outb(OP0_RCV_ENABLE, ioaddr); - netif_start_queue (dev); -} - -static void update_stop_hit(short ioaddr, unsigned short rx_stop_offset) -{ - outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, ioaddr); - if (znet_debug > 5) - printk(KERN_DEBUG "Updating stop hit with value %02x.\n", - (rx_stop_offset >> 6) | CR1_STOP_REG_UPDATE); - outb((rx_stop_offset >> 6) | CR1_STOP_REG_UPDATE, ioaddr); - outb(OP1_SWIT_TO_PORT_0, ioaddr); -} - -static __exit void znet_cleanup (void) -{ - if (znet_dev) { - struct znet_private *znet = netdev_priv(znet_dev); - - unregister_netdev (znet_dev); - kfree (znet->rx_start); - kfree (znet->tx_start); - free_netdev (znet_dev); - } -} - -module_init (znet_probe); -module_exit (znet_cleanup); |