summaryrefslogtreecommitdiff
path: root/drivers/net/hp100.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/hp100.c')
-rw-r--r--drivers/net/hp100.c28
1 files changed, 14 insertions, 14 deletions
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 8e2c4601b5f5..c52a1df5d922 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -180,22 +180,22 @@ struct hp100_private {
u_int *page_vaddr_algn; /* Aligned virtual address of allocated page */
u_long whatever_offset; /* Offset to bus/phys/dma address */
- int rxrcommit; /* # Rx PDLs commited to adapter */
- int txrcommit; /* # Tx PDLs commited to adapter */
+ int rxrcommit; /* # Rx PDLs committed to adapter */
+ int txrcommit; /* # Tx PDLs committed to adapter */
};
/*
* variables
*/
#ifdef CONFIG_ISA
-static const char *hp100_isa_tbl[] = {
+static const char *const hp100_isa_tbl[] __devinitconst = {
"HWPF150", /* HP J2573 rev A */
"HWP1950", /* HP J2573 */
};
#endif
#ifdef CONFIG_EISA
-static struct eisa_device_id hp100_eisa_tbl[] = {
+static const struct eisa_device_id hp100_eisa_tbl[] __devinitconst = {
{ "HWPF180" }, /* HP J2577 rev A */
{ "HWP1920" }, /* HP 27248B */
{ "HWP1940" }, /* HP J2577 */
@@ -336,7 +336,7 @@ static __devinit const char *hp100_read_id(int ioaddr)
}
#ifdef CONFIG_ISA
-static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr)
+static __devinit int hp100_isa_probe1(struct net_device *dev, int ioaddr)
{
const char *sig;
int i;
@@ -372,7 +372,7 @@ static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr)
* EISA and PCI are handled by device infrastructure.
*/
-static int __init hp100_isa_probe(struct net_device *dev, int addr)
+static int __devinit hp100_isa_probe(struct net_device *dev, int addr)
{
int err = -ENODEV;
@@ -396,7 +396,7 @@ static int __init hp100_isa_probe(struct net_device *dev, int addr)
#endif /* CONFIG_ISA */
#if !defined(MODULE) && defined(CONFIG_ISA)
-struct net_device * __init hp100_probe(int unit)
+struct net_device * __devinit hp100_probe(int unit)
{
struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private));
int err;
@@ -716,7 +716,7 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
* implemented/tested only with the lassen chip anyway... */
if (lp->mode == 1) { /* busmaster */
dma_addr_t page_baddr;
- /* Get physically continous memory for TX & RX PDLs */
+ /* Get physically continuous memory for TX & RX PDLs */
/* Conversion to new PCI API :
* Pages are always aligned and zeroed, no need to it ourself.
* Doc says should be OK for EISA bus as well - Jean II */
@@ -1596,7 +1596,7 @@ drop:
/* clean_txring checks if packets have been sent by the card by reading
* the TX_PDL register from the performance page and comparing it to the
- * number of commited packets. It then frees the skb's of the packets that
+ * number of committed packets. It then frees the skb's of the packets that
* obviously have been sent to the network.
*
* Needs the PERFORMANCE page selected.
@@ -1617,7 +1617,7 @@ static void hp100_clean_txring(struct net_device *dev)
#ifdef HP100_DEBUG
if (donecount > MAX_TX_PDL)
- printk("hp100: %s: Warning: More PDLs transmitted than commited to card???\n", dev->name);
+ printk("hp100: %s: Warning: More PDLs transmitted than committed to card???\n", dev->name);
#endif
for (; 0 != donecount; donecount--) {
@@ -1765,7 +1765,7 @@ drop:
* Receive Function (Non-Busmaster mode)
* Called when an "Receive Packet" interrupt occurs, i.e. the receive
* packet counter is non-zero.
- * For non-busmaster, this function does the whole work of transfering
+ * For non-busmaster, this function does the whole work of transferring
* the packet to the host memory and then up to higher layers via skb
* and netif_rx.
*/
@@ -1892,7 +1892,7 @@ static void hp100_rx_bm(struct net_device *dev)
/* RX_PKT_CNT states how many PDLs are currently formatted and available to
* the cards BM engine */
if ((hp100_inw(RX_PKT_CNT) & 0x00ff) >= lp->rxrcommit) {
- printk("hp100: %s: More packets received than commited? RX_PKT_CNT=0x%x, commit=0x%x\n",
+ printk("hp100: %s: More packets received than committed? RX_PKT_CNT=0x%x, commit=0x%x\n",
dev->name, hp100_inw(RX_PKT_CNT) & 0x00ff,
lp->rxrcommit);
return;
@@ -2256,7 +2256,7 @@ static irqreturn_t hp100_interrupt(int irq, void *dev_id)
if (lp->mode != 1) /* non busmaster */
hp100_rx(dev);
else if (!(val & HP100_RX_PDL_FILL_COMPL)) {
- /* Shouldnt happen - maybe we missed a RX_PDL_FILL Interrupt? */
+ /* Shouldn't happen - maybe we missed a RX_PDL_FILL Interrupt? */
hp100_rx_bm(dev);
}
}
@@ -2843,7 +2843,7 @@ static void cleanup_dev(struct net_device *d)
}
#ifdef CONFIG_EISA
-static int __init hp100_eisa_probe (struct device *gendev)
+static int __devinit hp100_eisa_probe (struct device *gendev)
{
struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private));
struct eisa_device *edev = to_eisa_device(gendev);