diff options
Diffstat (limited to 'drivers/net/ibm_emac')
| -rw-r--r-- | drivers/net/ibm_emac/Kconfig | 70 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/Makefile | 11 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac.h | 329 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_core.c | 2263 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_core.h | 222 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_debug.c | 211 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_debug.h | 62 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_mal.c | 570 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_mal.h | 267 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_phy.c | 398 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_phy.h | 80 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_rgmii.c | 200 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_rgmii.h | 64 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_tah.c | 110 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_tah.h | 87 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_zmii.c | 253 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_zmii.h | 82 |
17 files changed, 0 insertions, 5279 deletions
diff --git a/drivers/net/ibm_emac/Kconfig b/drivers/net/ibm_emac/Kconfig deleted file mode 100644 index f61c48047dc0..000000000000 --- a/drivers/net/ibm_emac/Kconfig +++ /dev/null @@ -1,70 +0,0 @@ -config IBM_EMAC - tristate "PowerPC 4xx on-chip Ethernet support" - depends on 4xx && !PPC_MERGE - help - This driver supports the PowerPC 4xx EMAC family of on-chip - Ethernet controllers. - -config IBM_EMAC_RXB - int "Number of receive buffers" - depends on IBM_EMAC - default "128" - -config IBM_EMAC_TXB - int "Number of transmit buffers" - depends on IBM_EMAC - default "64" - -config IBM_EMAC_POLL_WEIGHT - int "MAL NAPI polling weight" - depends on IBM_EMAC - default "32" - -config IBM_EMAC_RX_COPY_THRESHOLD - int "RX skb copy threshold (bytes)" - depends on IBM_EMAC - default "256" - -config IBM_EMAC_RX_SKB_HEADROOM - int "Additional RX skb headroom (bytes)" - depends on IBM_EMAC - default "0" - help - Additional receive skb headroom. Note, that driver - will always reserve at least 2 bytes to make IP header - aligned, so usually there is no need to add any additional - headroom. - - If unsure, set to 0. - -config IBM_EMAC_PHY_RX_CLK_FIX - bool "PHY Rx clock workaround" - depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR) - help - Enable this if EMAC attached to a PHY which doesn't generate - RX clock if there is no link, if this is the case, you will - see "TX disable timeout" or "RX disable timeout" in the system - log. - - If unsure, say N. - -config IBM_EMAC_DEBUG - bool "Debugging" - depends on IBM_EMAC - default n - -config IBM_EMAC_ZMII - bool - depends on IBM_EMAC && (NP405H || NP405L || 44x) - default y - -config IBM_EMAC_RGMII - bool - depends on IBM_EMAC && 440GX - default y - -config IBM_EMAC_TAH - bool - depends on IBM_EMAC && 440GX - default y - diff --git a/drivers/net/ibm_emac/Makefile b/drivers/net/ibm_emac/Makefile deleted file mode 100644 index f98ddf0e807a..000000000000 --- a/drivers/net/ibm_emac/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# Makefile for the PowerPC 4xx on-chip ethernet driver -# - -obj-$(CONFIG_IBM_EMAC) += ibm_emac.o - -ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o -ibm_emac-$(CONFIG_IBM_EMAC_ZMII) += ibm_emac_zmii.o -ibm_emac-$(CONFIG_IBM_EMAC_RGMII) += ibm_emac_rgmii.o -ibm_emac-$(CONFIG_IBM_EMAC_TAH) += ibm_emac_tah.o -ibm_emac-$(CONFIG_IBM_EMAC_DEBUG) += ibm_emac_debug.o diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h deleted file mode 100644 index 97ed22bb4320..000000000000 --- a/drivers/net/ibm_emac/ibm_emac.h +++ /dev/null @@ -1,329 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac.h - * - * Register definitions for PowerPC 4xx on-chip ethernet contoller - * - * Copyright (c) 2004, 2005 Zultys Technologies. - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * - * Based on original work by - * Matt Porter <mporter@kernel.crashing.org> - * Armin Kuster <akuster@mvista.com> - * Copyright 2002-2004 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#ifndef __IBM_EMAC_H_ -#define __IBM_EMAC_H_ - -#include <linux/types.h> - -/* This is a simple check to prevent use of this driver on non-tested SoCs */ -#if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \ - !defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \ - !defined(CONFIG_440EP) && !defined(CONFIG_NP405H) && !defined(CONFIG_440SPE) && \ - !defined(CONFIG_440GR) -#error "Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK" -#endif - -/* EMAC registers Write Access rules */ -struct emac_regs { - u32 mr0; /* special */ - u32 mr1; /* Reset */ - u32 tmr0; /* special */ - u32 tmr1; /* special */ - u32 rmr; /* Reset */ - u32 isr; /* Always */ - u32 iser; /* Reset */ - u32 iahr; /* Reset, R, T */ - u32 ialr; /* Reset, R, T */ - u32 vtpid; /* Reset, R, T */ - u32 vtci; /* Reset, R, T */ - u32 ptr; /* Reset, T */ - u32 iaht1; /* Reset, R */ - u32 iaht2; /* Reset, R */ - u32 iaht3; /* Reset, R */ - u32 iaht4; /* Reset, R */ - u32 gaht1; /* Reset, R */ - u32 gaht2; /* Reset, R */ - u32 gaht3; /* Reset, R */ - u32 gaht4; /* Reset, R */ - u32 lsah; - u32 lsal; - u32 ipgvr; /* Reset, T */ - u32 stacr; /* special */ - u32 trtr; /* special */ - u32 rwmr; /* Reset */ - u32 octx; - u32 ocrx; - u32 ipcr; -}; - -#if !defined(CONFIG_IBM_EMAC4) -#define EMAC_ETHTOOL_REGS_VER 0 -#define EMAC_ETHTOOL_REGS_SIZE (sizeof(struct emac_regs) - sizeof(u32)) -#else -#define EMAC_ETHTOOL_REGS_VER 1 -#define EMAC_ETHTOOL_REGS_SIZE sizeof(struct emac_regs) -#endif - -/* EMACx_MR0 */ -#define EMAC_MR0_RXI 0x80000000 -#define EMAC_MR0_TXI 0x40000000 -#define EMAC_MR0_SRST 0x20000000 -#define EMAC_MR0_TXE 0x10000000 -#define EMAC_MR0_RXE 0x08000000 -#define EMAC_MR0_WKE 0x04000000 - -/* EMACx_MR1 */ -#define EMAC_MR1_FDE 0x80000000 -#define EMAC_MR1_ILE 0x40000000 -#define EMAC_MR1_VLE 0x20000000 -#define EMAC_MR1_EIFC 0x10000000 -#define EMAC_MR1_APP 0x08000000 -#define EMAC_MR1_IST 0x01000000 - -#define EMAC_MR1_MF_MASK 0x00c00000 -#define EMAC_MR1_MF_10 0x00000000 -#define EMAC_MR1_MF_100 0x00400000 -#if !defined(CONFIG_IBM_EMAC4) -#define EMAC_MR1_MF_1000 0x00000000 -#define EMAC_MR1_MF_1000GPCS 0x00000000 -#define EMAC_MR1_MF_IPPA(id) 0x00000000 -#else -#define EMAC_MR1_MF_1000 0x00800000 -#define EMAC_MR1_MF_1000GPCS 0x00c00000 -#define EMAC_MR1_MF_IPPA(id) (((id) & 0x1f) << 6) -#endif - -#define EMAC_TX_FIFO_SIZE 2048 - -#if !defined(CONFIG_IBM_EMAC4) -#define EMAC_MR1_RFS_4K 0x00300000 -#define EMAC_MR1_RFS_16K 0x00000000 -#define EMAC_RX_FIFO_SIZE(gige) 4096 -#define EMAC_MR1_TFS_2K 0x00080000 -#define EMAC_MR1_TR0_MULT 0x00008000 -#define EMAC_MR1_JPSM 0x00000000 -#define EMAC_MR1_MWSW_001 0x00000000 -#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR0_MULT) -#else -#define EMAC_MR1_RFS_4K 0x00180000 -#define EMAC_MR1_RFS_16K 0x00280000 -#define EMAC_RX_FIFO_SIZE(gige) ((gige) ? 16384 : 4096) -#define EMAC_MR1_TFS_2K 0x00020000 -#define EMAC_MR1_TR 0x00008000 -#define EMAC_MR1_MWSW_001 0x00001000 -#define EMAC_MR1_JPSM 0x00000800 -#define EMAC_MR1_OBCI_MASK 0x00000038 -#define EMAC_MR1_OBCI_50 0x00000000 -#define EMAC_MR1_OBCI_66 0x00000008 -#define EMAC_MR1_OBCI_83 0x00000010 -#define EMAC_MR1_OBCI_100 0x00000018 -#define EMAC_MR1_OBCI_100P 0x00000020 -#define EMAC_MR1_OBCI(freq) ((freq) <= 50 ? EMAC_MR1_OBCI_50 : \ - (freq) <= 66 ? EMAC_MR1_OBCI_66 : \ - (freq) <= 83 ? EMAC_MR1_OBCI_83 : \ - (freq) <= 100 ? EMAC_MR1_OBCI_100 : EMAC_MR1_OBCI_100P) -#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR | \ - EMAC_MR1_OBCI(opb)) -#endif - -/* EMACx_TMR0 */ -#define EMAC_TMR0_GNP 0x80000000 -#if !defined(CONFIG_IBM_EMAC4) -#define EMAC_TMR0_DEFAULT 0x00000000 -#else -#define EMAC_TMR0_TFAE_2_32 0x00000001 -#define EMAC_TMR0_TFAE_4_64 0x00000002 -#define EMAC_TMR0_TFAE_8_128 0x00000003 -#define EMAC_TMR0_TFAE_16_256 0x00000004 -#define EMAC_TMR0_TFAE_32_512 0x00000005 -#define EMAC_TMR0_TFAE_64_1024 0x00000006 -#define EMAC_TMR0_TFAE_128_2048 0x00000007 -#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32 -#endif -#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP | EMAC_TMR0_DEFAULT) - -/* EMACx_TMR1 */ - -/* IBM manuals are not very clear here. - * This is my interpretation of how things are. --ebs - */ -#if defined(CONFIG_40x) -#define EMAC_FIFO_ENTRY_SIZE 8 -#define EMAC_MAL_BURST_SIZE (16 * 4) -#else -#define EMAC_FIFO_ENTRY_SIZE 16 -#define EMAC_MAL_BURST_SIZE (64 * 4) -#endif - -#if !defined(CONFIG_IBM_EMAC4) -#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0xff) << 16)) -#else -#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0x3ff) << 14)) -#endif - -/* EMACx_RMR */ -#define EMAC_RMR_SP 0x80000000 -#define EMAC_RMR_SFCS 0x40000000 -#define EMAC_RMR_RRP 0x20000000 -#define EMAC_RMR_RFP 0x10000000 -#define EMAC_RMR_ROP 0x08000000 -#define EMAC_RMR_RPIR 0x04000000 -#define EMAC_RMR_PPP 0x02000000 -#define EMAC_RMR_PME 0x01000000 -#define EMAC_RMR_PMME 0x00800000 -#define EMAC_RMR_IAE 0x00400000 -#define EMAC_RMR_MIAE 0x00200000 -#define EMAC_RMR_BAE 0x00100000 -#define EMAC_RMR_MAE 0x00080000 -#if !defined(CONFIG_IBM_EMAC4) -#define EMAC_RMR_BASE 0x00000000 -#else -#define EMAC_RMR_RFAF_2_32 0x00000001 -#define EMAC_RMR_RFAF_4_64 0x00000002 -#define EMAC_RMR_RFAF_8_128 0x00000003 -#define EMAC_RMR_RFAF_16_256 0x00000004 -#define EMAC_RMR_RFAF_32_512 0x00000005 -#define EMAC_RMR_RFAF_64_1024 0x00000006 -#define EMAC_RMR_RFAF_128_2048 0x00000007 -#define EMAC_RMR_BASE EMAC_RMR_RFAF_128_2048 -#endif - -/* EMACx_ISR & EMACx_ISER */ -#if !defined(CONFIG_IBM_EMAC4) -#define EMAC_ISR_TXPE 0x00000000 -#define EMAC_ISR_RXPE 0x00000000 -#define EMAC_ISR_TXUE 0x00000000 -#define EMAC_ISR_RXOE 0x00000000 -#else -#define EMAC_ISR_TXPE 0x20000000 -#define EMAC_ISR_RXPE 0x10000000 -#define EMAC_ISR_TXUE 0x08000000 -#define EMAC_ISR_RXOE 0x04000000 -#endif -#define EMAC_ISR_OVR 0x02000000 -#define EMAC_ISR_PP 0x01000000 -#define EMAC_ISR_BP 0x00800000 -#define EMAC_ISR_RP 0x00400000 -#define EMAC_ISR_SE 0x00200000 -#define EMAC_ISR_ALE 0x00100000 -#define EMAC_ISR_BFCS 0x00080000 -#define EMAC_ISR_PTLE 0x00040000 -#define EMAC_ISR_ORE 0x00020000 -#define EMAC_ISR_IRE 0x00010000 -#define EMAC_ISR_SQE 0x00000080 -#define EMAC_ISR_TE 0x00000040 -#define EMAC_ISR_MOS 0x00000002 -#define EMAC_ISR_MOF 0x00000001 - -/* EMACx_STACR */ -#define EMAC_STACR_PHYD_MASK 0xffff -#define EMAC_STACR_PHYD_SHIFT 16 -#define EMAC_STACR_OC 0x00008000 -#define EMAC_STACR_PHYE 0x00004000 -#define EMAC_STACR_STAC_MASK 0x00003000 -#define EMAC_STACR_STAC_READ 0x00001000 -#define EMAC_STACR_STAC_WRITE 0x00002000 -#if !defined(CONFIG_IBM_EMAC4) -#define EMAC_STACR_OPBC_MASK 0x00000C00 -#define EMAC_STACR_OPBC_50 0x00000000 -#define EMAC_STACR_OPBC_66 0x00000400 -#define EMAC_STACR_OPBC_83 0x00000800 -#define EMAC_STACR_OPBC_100 0x00000C00 -#define EMAC_STACR_OPBC(freq) ((freq) <= 50 ? EMAC_STACR_OPBC_50 : \ - (freq) <= 66 ? EMAC_STACR_OPBC_66 : \ - (freq) <= 83 ? EMAC_STACR_OPBC_83 : EMAC_STACR_OPBC_100) -#define EMAC_STACR_BASE(opb) EMAC_STACR_OPBC(opb) -#else -#define EMAC_STACR_BASE(opb) 0x00000000 -#endif -#define EMAC_STACR_PCDA_MASK 0x1f -#define EMAC_STACR_PCDA_SHIFT 5 -#define EMAC_STACR_PRA_MASK 0x1f - -/* - * For the 440SPe, AMCC inexplicably changed the polarity of - * the "operation complete" bit in the MII control register. - */ -#if defined(CONFIG_440SPE) -static inline int emac_phy_done(u32 stacr) -{ - return !(stacr & EMAC_STACR_OC); -}; -#define EMAC_STACR_START EMAC_STACR_OC - -#else /* CONFIG_440SPE */ -static inline int emac_phy_done(u32 stacr) -{ - return stacr & EMAC_STACR_OC; -}; -#define EMAC_STACR_START 0 -#endif /* !CONFIG_440SPE */ - -/* EMACx_TRTR */ -#if !defined(CONFIG_IBM_EMAC4) -#define EMAC_TRTR_SHIFT 27 -#else -#define EMAC_TRTR_SHIFT 24 -#endif -#define EMAC_TRTR(size) ((((size) >> 6) - 1) << EMAC_TRTR_SHIFT) - -/* EMACx_RWMR */ -#if !defined(CONFIG_IBM_EMAC4) -#define EMAC_RWMR(l,h) (((l) << 23) | ( ((h) & 0x1ff) << 7)) -#else -#define EMAC_RWMR(l,h) (((l) << 22) | ( ((h) & 0x3ff) << 6)) -#endif - -/* EMAC specific TX descriptor control fields (write access) */ -#define EMAC_TX_CTRL_GFCS 0x0200 -#define EMAC_TX_CTRL_GP 0x0100 -#define EMAC_TX_CTRL_ISA 0x0080 -#define EMAC_TX_CTRL_RSA 0x0040 -#define EMAC_TX_CTRL_IVT 0x0020 -#define EMAC_TX_CTRL_RVT 0x0010 -#define EMAC_TX_CTRL_TAH_CSUM 0x000e - -/* EMAC specific TX descriptor status fields (read access) */ -#define EMAC_TX_ST_BFCS 0x0200 -#define EMAC_TX_ST_LCS 0x0080 -#define EMAC_TX_ST_ED 0x0040 -#define EMAC_TX_ST_EC 0x0020 -#define EMAC_TX_ST_LC 0x0010 -#define EMAC_TX_ST_MC 0x0008 -#define EMAC_TX_ST_SC 0x0004 -#define EMAC_TX_ST_UR 0x0002 -#define EMAC_TX_ST_SQE 0x0001 -#if !defined(CONFIG_IBM_EMAC_TAH) -#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \ - EMAC_TX_ST_EC | EMAC_TX_ST_LC | \ - EMAC_TX_ST_MC | EMAC_TX_ST_UR)) -#else -#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \ - EMAC_TX_ST_EC | EMAC_TX_ST_LC)) -#endif - -/* EMAC specific RX descriptor status fields (read access) */ -#define EMAC_RX_ST_OE 0x0200 -#define EMAC_RX_ST_PP 0x0100 -#define EMAC_RX_ST_BP 0x0080 -#define EMAC_RX_ST_RP 0x0040 -#define EMAC_RX_ST_SE 0x0020 -#define EMAC_RX_ST_AE 0x0010 -#define EMAC_RX_ST_BFCS 0x0008 -#define EMAC_RX_ST_PTL 0x0004 -#define EMAC_RX_ST_ORE 0x0002 -#define EMAC_RX_ST_IRE 0x0001 -#define EMAC_RX_TAH_BAD_CSUM 0x0003 -#define EMAC_BAD_RX_MASK (EMAC_RX_ST_OE | EMAC_RX_ST_BP | \ - EMAC_RX_ST_RP | EMAC_RX_ST_SE | \ - EMAC_RX_ST_AE | EMAC_RX_ST_BFCS | \ - EMAC_RX_ST_PTL | EMAC_RX_ST_ORE | \ - EMAC_RX_ST_IRE ) -#endif /* __IBM_EMAC_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c deleted file mode 100644 index 73664f226f32..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ /dev/null @@ -1,2263 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_core.c - * - * Driver for PowerPC 4xx on-chip ethernet controller. - * - * Copyright (c) 2004, 2005 Zultys Technologies. - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * - * Based on original work by - * Matt Porter <mporter@kernel.crashing.org> - * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org> - * Armin Kuster <akuster@mvista.com> - * Johnnie Peters <jpeters@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/crc32.h> -#include <linux/ethtool.h> -#include <linux/mii.h> -#include <linux/bitops.h> - -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/dma.h> -#include <asm/uaccess.h> -#include <asm/ocp.h> - -#include "ibm_emac_core.h" -#include "ibm_emac_debug.h" - -/* - * Lack of dma_unmap_???? calls is intentional. - * - * API-correct usage requires additional support state information to be - * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to - * EMAC design (e.g. TX buffer passed from network stack can be split into - * several BDs, dma_map_single/dma_map_page can be used to map particular BD), - * maintaining such information will add additional overhead. - * Current DMA API implementation for 4xx processors only ensures cache coherency - * and dma_unmap_???? routines are empty and are likely to stay this way. - * I decided to omit dma_unmap_??? calls because I don't want to add additional - * complexity just for the sake of following some abstract API, when it doesn't - * add any real benefit to the driver. I understand that this decision maybe - * controversial, but I really tried to make code API-correct and efficient - * at the same time and didn't come up with code I liked :(. --ebs - */ - -#define DRV_NAME "emac" -#define DRV_VERSION "3.54" -#define DRV_DESC "PPC 4xx OCP EMAC driver" - -MODULE_DESCRIPTION(DRV_DESC); -MODULE_AUTHOR - ("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>"); -MODULE_LICENSE("GPL"); - -/* minimum number of free TX descriptors required to wake up TX process */ -#define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4) - -/* If packet size is less than this number, we allocate small skb and copy packet - * contents into it instead of just sending original big skb up - */ -#define EMAC_RX_COPY_THRESH CONFIG_IBM_EMAC_RX_COPY_THRESHOLD - -/* Since multiple EMACs share MDIO lines in various ways, we need - * to avoid re-using the same PHY ID in cases where the arch didn't - * setup precise phy_map entries - */ -static u32 busy_phy_map; - -#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && \ - (defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)) -/* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us - * with PHY RX clock problem. - * 440EP/440GR has more sane SDR0_MFR register implementation than 440GX, which - * also allows controlling each EMAC clock - */ -static inline void EMAC_RX_CLK_TX(int idx) -{ - unsigned long flags; - local_irq_save(flags); - -#if defined(CONFIG_405EP) - mtdcr(0xf3, mfdcr(0xf3) | (1 << idx)); -#else /* CONFIG_440EP || CONFIG_440GR */ - SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx)); -#endif - - local_irq_restore(flags); -} - -static inline void EMAC_RX_CLK_DEFAULT(int idx) -{ - unsigned long flags; - local_irq_save(flags); - -#if defined(CONFIG_405EP) - mtdcr(0xf3, mfdcr(0xf3) & ~(1 << idx)); -#else /* CONFIG_440EP */ - SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~(0x08000000 >> idx)); -#endif - - local_irq_restore(flags); -} -#else -#define EMAC_RX_CLK_TX(idx) ((void)0) -#define EMAC_RX_CLK_DEFAULT(idx) ((void)0) -#endif - -#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && defined(CONFIG_440GX) -/* We can switch Ethernet clock to the internal source through SDR0_MFR[ECS], - * unfortunately this is less flexible than 440EP case, because it's a global - * setting for all EMACs, therefore we do this clock trick only during probe. - */ -#define EMAC_CLK_INTERNAL SDR_WRITE(DCRN_SDR_MFR, \ - SDR_READ(DCRN_SDR_MFR) | 0x08000000) -#define EMAC_CLK_EXTERNAL SDR_WRITE(DCRN_SDR_MFR, \ - SDR_READ(DCRN_SDR_MFR) & ~0x08000000) -#else -#define EMAC_CLK_INTERNAL ((void)0) -#define EMAC_CLK_EXTERNAL ((void)0) -#endif - -/* I don't want to litter system log with timeout errors - * when we have brain-damaged PHY. - */ -static inline void emac_report_timeout_error(struct ocp_enet_private *dev, - const char *error) -{ -#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) - DBG("%d: %s" NL, dev->def->index, error); -#else - if (net_ratelimit()) - printk(KERN_ERR "emac%d: %s\n", dev->def->index, error); -#endif -} - -/* PHY polling intervals */ -#define PHY_POLL_LINK_ON HZ -#define PHY_POLL_LINK_OFF (HZ / 5) - -/* Graceful stop timeouts in us. - * We should allow up to 1 frame time (full-duplex, ignoring collisions) - */ -#define STOP_TIMEOUT_10 1230 -#define STOP_TIMEOUT_100 124 -#define STOP_TIMEOUT_1000 13 -#define STOP_TIMEOUT_1000_JUMBO 73 - -/* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */ -static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = { - "rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum", - "tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom", - "rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu", - "rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet", - "rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error", - "rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range", - "rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun", - "rx_bad_packet", "rx_runt_packet", "rx_short_event", - "rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long", - "rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors", - "tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral", - "tx_bd_excessive_collisions", "tx_bd_late_collision", - "tx_bd_multple_collisions", "tx_bd_single_collision", - "tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe", - "tx_errors" -}; - -static irqreturn_t emac_irq(int irq, void *dev_instance); -static void emac_clean_tx_ring(struct ocp_enet_private *dev); - -static inline int emac_phy_supports_gige(int phy_mode) -{ - return phy_mode == PHY_MODE_GMII || - phy_mode == PHY_MODE_RGMII || - phy_mode == PHY_MODE_TBI || - phy_mode == PHY_MODE_RTBI; -} - -static inline int emac_phy_gpcs(int phy_mode) -{ - return phy_mode == PHY_MODE_TBI || - phy_mode == PHY_MODE_RTBI; -} - -static inline void emac_tx_enable(struct ocp_enet_private *dev) -{ - struct emac_regs __iomem *p = dev->emacp; - unsigned long flags; - u32 r; - - local_irq_save(flags); - - DBG("%d: tx_enable" NL, dev->def->index); - - r = in_be32(&p->mr0); - if (!(r & EMAC_MR0_TXE)) - out_be32(&p->mr0, r | EMAC_MR0_TXE); - local_irq_restore(flags); -} - -static void emac_tx_disable(struct ocp_enet_private *dev) -{ - struct emac_regs __iomem *p = dev->emacp; - unsigned long flags; - u32 r; - - local_irq_save(flags); - - DBG("%d: tx_disable" NL, dev->def->index); - - r = in_be32(&p->mr0); - if (r & EMAC_MR0_TXE) { - int n = dev->stop_timeout; - out_be32(&p->mr0, r & ~EMAC_MR0_TXE); - while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n) { - udelay(1); - --n; - } - if (unlikely(!n)) - emac_report_timeout_error(dev, "TX disable timeout"); - } - local_irq_restore(flags); -} - -static void emac_rx_enable(struct ocp_enet_private *dev) -{ - struct emac_regs __iomem *p = dev->emacp; - unsigned long flags; - u32 r; - - local_irq_save(flags); - if (unlikely(dev->commac.rx_stopped)) - goto out; - - DBG("%d: rx_enable" NL, dev->def->index); - - r = in_be32(&p->mr0); - if (!(r & EMAC_MR0_RXE)) { - if (unlikely(!(r & EMAC_MR0_RXI))) { - /* Wait if previous async disable is still in progress */ - int n = dev->stop_timeout; - while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n) { - udelay(1); - --n; - } - if (unlikely(!n)) - emac_report_timeout_error(dev, - "RX disable timeout"); - } - out_be32(&p->mr0, r | EMAC_MR0_RXE); - } - out: - local_irq_restore(flags); -} - -static void emac_rx_disable(struct ocp_enet_private *dev) -{ - struct emac_regs __iomem *p = dev->emacp; - unsigned long flags; - u32 r; - - local_irq_save(flags); - - DBG("%d: rx_disable" NL, dev->def->index); - - r = in_be32(&p->mr0); - if (r & EMAC_MR0_RXE) { - int n = dev->stop_timeout; - out_be32(&p->mr0, r & ~EMAC_MR0_RXE); - while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n) { - udelay(1); - --n; - } - if (unlikely(!n)) - emac_report_timeout_error(dev, "RX disable timeout"); - } - local_irq_restore(flags); -} - -static inline void emac_rx_disable_async(struct ocp_enet_private *dev) -{ - struct emac_regs __iomem *p = dev->emacp; - unsigned long flags; - u32 r; - - local_irq_save(flags); - - DBG("%d: rx_disable_async" NL, dev->def->index); - - r = in_be32(&p->mr0); - if (r & EMAC_MR0_RXE) - out_be32(&p->mr0, r & ~EMAC_MR0_RXE); - local_irq_restore(flags); -} - -static int emac_reset(struct ocp_enet_private *dev) -{ - struct emac_regs __iomem *p = dev->emacp; - unsigned long flags; - int n = 20; - - DBG("%d: reset" NL, dev->def->index); - - local_irq_save(flags); - - if (!dev->reset_failed) { - /* 40x erratum suggests stopping RX channel before reset, - * we stop TX as well - */ - emac_rx_disable(dev); - emac_tx_disable(dev); - } - - out_be32(&p->mr0, EMAC_MR0_SRST); - while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n) - --n; - local_irq_restore(flags); - - if (n) { - dev->reset_failed = 0; - return 0; - } else { - emac_report_timeout_error(dev, "reset timeout"); - dev->reset_failed = 1; - return -ETIMEDOUT; - } -} - -static void emac_hash_mc(struct ocp_enet_private *dev) -{ - struct emac_regs __iomem *p = dev->emacp; - u16 gaht[4] = { 0 }; - struct dev_mc_list *dmi; - - DBG("%d: hash_mc %d" NL, dev->def->index, dev->ndev->mc_count); - - for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) { - int bit; - DECLARE_MAC_BUF(mac); - DBG2("%d: mc %s" NL, - dev->def->index, print_mac(mac, dmi->dmi_addr)); - - bit = 63 - (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 26); - gaht[bit >> 4] |= 0x8000 >> (bit & 0x0f); - } - out_be32(&p->gaht1, gaht[0]); - out_be32(&p->gaht2, gaht[1]); - out_be32(&p->gaht3, gaht[2]); - out_be32(&p->gaht4, gaht[3]); -} - -static inline u32 emac_iff2rmr(struct net_device *ndev) -{ - u32 r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE | - EMAC_RMR_BASE; - - if (ndev->flags & IFF_PROMISC) - r |= EMAC_RMR_PME; - else if (ndev->flags & IFF_ALLMULTI || ndev->mc_count > 32) - r |= EMAC_RMR_PMME; - else if (ndev->mc_count > 0) - r |= EMAC_RMR_MAE; - - return r; -} - -static inline int emac_opb_mhz(void) -{ - return (ocp_sys_info.opb_bus_freq + 500000) / 1000000; -} - -/* BHs disabled */ -static int emac_configure(struct ocp_enet_private *dev) -{ - struct emac_regs __iomem *p = dev->emacp; - struct net_device *ndev = dev->ndev; - int gige; - u32 r; - - DBG("%d: configure" NL, dev->def->index); - - if (emac_reset(dev) < 0) - return -ETIMEDOUT; - - tah_reset(dev->tah_dev); - - /* Mode register */ - r = EMAC_MR1_BASE(emac_opb_mhz()) | EMAC_MR1_VLE | EMAC_MR1_IST; - if (dev->phy.duplex == DUPLEX_FULL) - r |= EMAC_MR1_FDE | EMAC_MR1_MWSW_001; - dev->stop_timeout = STOP_TIMEOUT_10; - switch (dev->phy.speed) { - case SPEED_1000: - if (emac_phy_gpcs(dev->phy.mode)) { - r |= EMAC_MR1_MF_1000GPCS | - EMAC_MR1_MF_IPPA(dev->phy.address); - - /* Put some arbitrary OUI, Manuf & Rev IDs so we can - * identify this GPCS PHY later. - */ - out_be32(&p->ipcr, 0xdeadbeef); - } else - r |= EMAC_MR1_MF_1000; - r |= EMAC_MR1_RFS_16K; - gige = 1; - - if (dev->ndev->mtu > ETH_DATA_LEN) { - r |= EMAC_MR1_JPSM; - dev->stop_timeout = STOP_TIMEOUT_1000_JUMBO; - } else - dev->stop_timeout = STOP_TIMEOUT_1000; - break; - case SPEED_100: - r |= EMAC_MR1_MF_100; - dev->stop_timeout = STOP_TIMEOUT_100; - /* Fall through */ - default: - r |= EMAC_MR1_RFS_4K; - gige = 0; - break; - } - - if (dev->rgmii_dev) - rgmii_set_speed(dev->rgmii_dev, dev->rgmii_input, - dev->phy.speed); - else - zmii_set_speed(dev->zmii_dev, dev->zmii_input, dev->phy.speed); - -#if !defined(CONFIG_40x) - /* on 40x erratum forces us to NOT use integrated flow control, - * let's hope it works on 44x ;) - */ - if (dev->phy.duplex == DUPLEX_FULL) { - if (dev->phy.pause) - r |= EMAC_MR1_EIFC | EMAC_MR1_APP; - else if (dev->phy.asym_pause) - r |= EMAC_MR1_APP; - } -#endif - out_be32(&p->mr1, r); - - /* Set individual MAC address */ - out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]); - out_be32(&p->ialr, (ndev->dev_addr[2] << 24) | - (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) | - ndev->dev_addr[5]); - - /* VLAN Tag Protocol ID */ - out_be32(&p->vtpid, 0x8100); - - /* Receive mode register */ - r = emac_iff2rmr(ndev); - if (r & EMAC_RMR_MAE) - emac_hash_mc(dev); - out_be32(&p->rmr, r); - - /* FIFOs thresholds */ - r = EMAC_TMR1((EMAC_MAL_BURST_SIZE / EMAC_FIFO_ENTRY_SIZE) + 1, - EMAC_TX_FIFO_SIZE / 2 / EMAC_FIFO_ENTRY_SIZE); - out_be32(&p->tmr1, r); - out_be32(&p->trtr, EMAC_TRTR(EMAC_TX_FIFO_SIZE / 2)); - - /* PAUSE frame is sent when RX FIFO reaches its high-water mark, - there should be still enough space in FIFO to allow the our link - partner time to process this frame and also time to send PAUSE - frame itself. - - Here is the worst case scenario for the RX FIFO "headroom" - (from "The Switch Book") (100Mbps, without preamble, inter-frame gap): - - 1) One maximum-length frame on TX 1522 bytes - 2) One PAUSE frame time 64 bytes - 3) PAUSE frame decode time allowance 64 bytes - 4) One maximum-length frame on RX 1522 bytes - 5) Round-trip propagation delay of the link (100Mb) 15 bytes - ---------- - 3187 bytes - - I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes) - low-water mark to RX_FIFO_SIZE / 8 (512 bytes) - */ - r = EMAC_RWMR(EMAC_RX_FIFO_SIZE(gige) / 8 / EMAC_FIFO_ENTRY_SIZE, - EMAC_RX_FIFO_SIZE(gige) / 4 / EMAC_FIFO_ENTRY_SIZE); - out_be32(&p->rwmr, r); - - /* Set PAUSE timer to the maximum */ - out_be32(&p->ptr, 0xffff); - - /* IRQ sources */ - out_be32(&p->iser, EMAC_ISR_TXPE | EMAC_ISR_RXPE | /* EMAC_ISR_TXUE | - EMAC_ISR_RXOE | */ EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE | - EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE | - EMAC_ISR_IRE | EMAC_ISR_TE); - - /* We need to take GPCS PHY out of isolate mode after EMAC reset */ - if (emac_phy_gpcs(dev->phy.mode)) - mii_reset_phy(&dev->phy); - - return 0; -} - -/* BHs disabled */ -static void emac_reinitialize(struct ocp_enet_private *dev) -{ - DBG("%d: reinitialize" NL, dev->def->index); - - if (!emac_configure(dev)) { - emac_tx_enable(dev); - emac_rx_enable(dev); - } -} - -/* BHs disabled */ -static void emac_full_tx_reset(struct net_device *ndev) -{ - struct ocp_enet_private *dev = ndev->priv; - struct ocp_func_emac_data *emacdata = dev->def->additions; - - DBG("%d: full_tx_reset" NL, dev->def->index); - - emac_tx_disable(dev); - mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan); - emac_clean_tx_ring(dev); - dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0; - - emac_configure(dev); - - mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan); - emac_tx_enable(dev); - emac_rx_enable(dev); - - netif_wake_queue(ndev); -} - -static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg) -{ - struct emac_regs __iomem *p = dev->emacp; - u32 r; - int n; - - DBG2("%d: mdio_read(%02x,%02x)" NL, dev->def->index, id, reg); - - /* Enable proper MDIO port */ - zmii_enable_mdio(dev->zmii_dev, dev->zmii_input); - - /* Wait for management interface to become idle */ - n = 10; - while (!emac_phy_done(in_be32(&p->stacr))) { - udelay(1); - if (!--n) - goto to; - } - - /* Issue read command */ - out_be32(&p->stacr, - EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ | - (reg & EMAC_STACR_PRA_MASK) - | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) - | EMAC_STACR_START); - - /* Wait for read to complete */ - n = 100; - while (!emac_phy_done(r = in_be32(&p->stacr))) { - udelay(1); - if (!--n) - goto to; - } - - if (unlikely(r & EMAC_STACR_PHYE)) { - DBG("%d: mdio_read(%02x, %02x) failed" NL, dev->def->index, - id, reg); - return -EREMOTEIO; - } - - r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK); - DBG2("%d: mdio_read -> %04x" NL, dev->def->index, r); - return r; - to: - DBG("%d: MII management interface timeout (read)" NL, dev->def->index); - return -ETIMEDOUT; -} - -static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg, - u16 val) -{ - struct emac_regs __iomem *p = dev->emacp; - int n; - - DBG2("%d: mdio_write(%02x,%02x,%04x)" NL, dev->def->index, id, reg, - val); - - /* Enable proper MDIO port */ - zmii_enable_mdio(dev->zmii_dev, dev->zmii_input); - - /* Wait for management interface to be idle */ - n = 10; - while (!emac_phy_done(in_be32(&p->stacr))) { - udelay(1); - if (!--n) - goto to; - } - - /* Issue write command */ - out_be32(&p->stacr, - EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE | - (reg & EMAC_STACR_PRA_MASK) | - ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) | - (val << EMAC_STACR_PHYD_SHIFT) | EMAC_STACR_START); - - /* Wait for write to complete */ - n = 100; - while (!emac_phy_done(in_be32(&p->stacr))) { - udelay(1); - if (!--n) - goto to; - } - return; - to: - DBG("%d: MII management interface timeout (write)" NL, dev->def->index); -} - -static int emac_mdio_read(struct net_device *ndev, int id, int reg) -{ - struct ocp_enet_private *dev = ndev->priv; - int res; - - local_bh_disable(); - res = __emac_mdio_read(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id, - (u8) reg); - local_bh_enable(); - return res; -} - -static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val) -{ - struct ocp_enet_private *dev = ndev->priv; - - local_bh_disable(); - __emac_mdio_write(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id, - (u8) reg, (u16) val); - local_bh_enable(); -} - -/* BHs disabled */ -static void emac_set_multicast_list(struct net_device *ndev) -{ - struct ocp_enet_private *dev = ndev->priv; - struct emac_regs __iomem *p = dev->emacp; - u32 rmr = emac_iff2rmr(ndev); - - DBG("%d: multicast %08x" NL, dev->def->index, rmr); - BUG_ON(!netif_running(dev->ndev)); - - /* I decided to relax register access rules here to avoid - * full EMAC reset. - * - * There is a real problem with EMAC4 core if we use MWSW_001 bit - * in MR1 register and do a full EMAC reset. - * One TX BD status update is delayed and, after EMAC reset, it - * never happens, resulting in TX hung (it'll be recovered by TX - * timeout handler eventually, but this is just gross). - * So we either have to do full TX reset or try to cheat here :) - * - * The only required change is to RX mode register, so I *think* all - * we need is just to stop RX channel. This seems to work on all - * tested SoCs. --ebs - */ - emac_rx_disable(dev); - if (rmr & EMAC_RMR_MAE) - emac_hash_mc(dev); - out_be32(&p->rmr, rmr); - emac_rx_enable(dev); -} - -/* BHs disabled */ -static int emac_resize_rx_ring(struct ocp_enet_private *dev, int new_mtu) -{ - struct ocp_func_emac_data *emacdata = dev->def->additions; - int rx_sync_size = emac_rx_sync_size(new_mtu); - int rx_skb_size = emac_rx_skb_size(new_mtu); - int i, ret = 0; - - emac_rx_disable(dev); - mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan); - - if (dev->rx_sg_skb) { - ++dev->estats.rx_dropped_resize; - dev_kfree_skb(dev->rx_sg_skb); - dev->rx_sg_skb = NULL; - } - - /* Make a first pass over RX ring and mark BDs ready, dropping - * non-processed packets on the way. We need this as a separate pass - * to simplify error recovery in the case of allocation failure later. - */ - for (i = 0; i < NUM_RX_BUFF; ++i) { - if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST) - ++dev->estats.rx_dropped_resize; - - dev->rx_desc[i].data_len = 0; - dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | - (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); - } - - /* Reallocate RX ring only if bigger skb buffers are required */ - if (rx_skb_size <= dev->rx_skb_size) - goto skip; - - /* Second pass, allocate new skbs */ - for (i = 0; i < NUM_RX_BUFF; ++i) { - struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC); - if (!skb) { - ret = -ENOMEM; - goto oom; - } - - BUG_ON(!dev->rx_skb[i]); - dev_kfree_skb(dev->rx_skb[i]); - - skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); - dev->rx_desc[i].data_ptr = - dma_map_single(dev->ldev, skb->data - 2, rx_sync_size, - DMA_FROM_DEVICE) + 2; - dev->rx_skb[i] = skb; - } - skip: - /* Check if we need to change "Jumbo" bit in MR1 */ - if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) { - /* This is to prevent starting RX channel in emac_rx_enable() */ - dev->commac.rx_stopped = 1; - - dev->ndev->mtu = new_mtu; - emac_full_tx_reset(dev->ndev); - } - - mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(new_mtu)); - oom: - /* Restart RX */ - dev->commac.rx_stopped = dev->rx_slot = 0; - mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); - emac_rx_enable(dev); - - return ret; -} - -/* Process ctx, rtnl_lock semaphore */ -static int emac_change_mtu(struct net_device *ndev, int new_mtu) -{ - struct ocp_enet_private *dev = ndev->priv; - int ret = 0; - - if (new_mtu < EMAC_MIN_MTU || new_mtu > EMAC_MAX_MTU) - return -EINVAL; - - DBG("%d: change_mtu(%d)" NL, dev->def->index, new_mtu); - - local_bh_disable(); - if (netif_running(ndev)) { - /* Check if we really need to reinitalize RX ring */ - if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu)) - ret = emac_resize_rx_ring(dev, new_mtu); - } - - if (!ret) { - ndev->mtu = new_mtu; - dev->rx_skb_size = emac_rx_skb_size(new_mtu); - dev->rx_sync_size = emac_rx_sync_size(new_mtu); - } - local_bh_enable(); - - return ret; -} - -static void emac_clean_tx_ring(struct ocp_enet_private *dev) -{ - int i; - for (i = 0; i < NUM_TX_BUFF; ++i) { - if (dev->tx_skb[i]) { - dev_kfree_skb(dev->tx_skb[i]); - dev->tx_skb[i] = NULL; - if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY) - ++dev->estats.tx_dropped; - } - dev->tx_desc[i].ctrl = 0; - dev->tx_desc[i].data_ptr = 0; - } -} - -static void emac_clean_rx_ring(struct ocp_enet_private *dev) -{ - int i; - for (i = 0; i < NUM_RX_BUFF; ++i) - if (dev->rx_skb[i]) { - dev->rx_desc[i].ctrl = 0; - dev_kfree_skb(dev->rx_skb[i]); - dev->rx_skb[i] = NULL; - dev->rx_desc[i].data_ptr = 0; - } - - if (dev->rx_sg_skb) { - dev_kfree_skb(dev->rx_sg_skb); - dev->rx_sg_skb = NULL; - } -} - -static inline int emac_alloc_rx_skb(struct ocp_enet_private *dev, int slot, - gfp_t flags) -{ - struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags); - if (unlikely(!skb)) - return -ENOMEM; - - dev->rx_skb[slot] = skb; - dev->rx_desc[slot].data_len = 0; - - skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); - dev->rx_desc[slot].data_ptr = - dma_map_single(dev->ldev, skb->data - 2, dev->rx_sync_size, - DMA_FROM_DEVICE) + 2; - barrier(); - dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | - (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); - - return 0; -} - -static void emac_print_link_status(struct ocp_enet_private *dev) -{ - if (netif_carrier_ok(dev->ndev)) - printk(KERN_INFO "%s: link is up, %d %s%s\n", - dev->ndev->name, dev->phy.speed, - dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX", - dev->phy.pause ? ", pause enabled" : - dev->phy.asym_pause ? ", assymetric pause enabled" : ""); - else - printk(KERN_INFO "%s: link is down\n", dev->ndev->name); -} - -/* Process ctx, rtnl_lock semaphore */ -static int emac_open(struct net_device *ndev) -{ - struct ocp_enet_private *dev = ndev->priv; - struct ocp_func_emac_data *emacdata = dev->def->additions; - int err, i; - - DBG("%d: open" NL, dev->def->index); - - /* Setup error IRQ handler */ - err = request_irq(dev->def->irq, emac_irq, 0, "EMAC", dev); - if (err) { - printk(KERN_ERR "%s: failed to request IRQ %d\n", - ndev->name, dev->def->irq); - return err; - } - - /* Allocate RX ring */ - for (i = 0; i < NUM_RX_BUFF; ++i) - if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) { - printk(KERN_ERR "%s: failed to allocate RX ring\n", - ndev->name); - goto oom; - } - - local_bh_disable(); - dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot = - dev->commac.rx_stopped = 0; - dev->rx_sg_skb = NULL; - - if (dev->phy.address >= 0) { - int link_poll_interval; - if (dev->phy.def->ops->poll_link(&dev->phy)) { - dev->phy.def->ops->read_link(&dev->phy); - EMAC_RX_CLK_DEFAULT(dev->def->index); - netif_carrier_on(dev->ndev); - link_poll_interval = PHY_POLL_LINK_ON; - } else { - EMAC_RX_CLK_TX(dev->def->index); - netif_carrier_off(dev->ndev); - link_poll_interval = PHY_POLL_LINK_OFF; - } - mod_timer(&dev->link_timer, jiffies + link_poll_interval); - emac_print_link_status(dev); - } else - netif_carrier_on(dev->ndev); - - emac_configure(dev); - mal_poll_add(dev->mal, &dev->commac); - mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan); - mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(ndev->mtu)); - mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); - emac_tx_enable(dev); - emac_rx_enable(dev); - netif_start_queue(ndev); - local_bh_enable(); - - return 0; - oom: - emac_clean_rx_ring(dev); - free_irq(dev->def->irq, dev); - return -ENOMEM; -} - -/* BHs disabled */ -static int emac_link_differs(struct ocp_enet_private *dev) -{ - u32 r = in_be32(&dev->emacp->mr1); - - int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF; - int speed, pause, asym_pause; - - if (r & EMAC_MR1_MF_1000) - speed = SPEED_1000; - else if (r & EMAC_MR1_MF_100) - speed = SPEED_100; - else - speed = SPEED_10; - - switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) { - case (EMAC_MR1_EIFC | EMAC_MR1_APP): - pause = 1; - asym_pause = 0; - break; - case EMAC_MR1_APP: - pause = 0; - asym_pause = 1; - break; - default: - pause = asym_pause = 0; - } - return speed != dev->phy.speed || duplex != dev->phy.duplex || - pause != dev->phy.pause || asym_pause != dev->phy.asym_pause; -} - -/* BHs disabled */ -static void emac_link_timer(unsigned long data) -{ - struct ocp_enet_private *dev = (struct ocp_enet_private *)data; - int link_poll_interval; - - DBG2("%d: link timer" NL, dev->def->index); - - if (dev->phy.def->ops->poll_link(&dev->phy)) { - if (!netif_carrier_ok(dev->ndev)) { - EMAC_RX_CLK_DEFAULT(dev->def->index); - - /* Get new link parameters */ - dev->phy.def->ops->read_link(&dev->phy); - - if (dev->tah_dev || emac_link_differs(dev)) - emac_full_tx_reset(dev->ndev); - - netif_carrier_on(dev->ndev); - emac_print_link_status(dev); - } - link_poll_interval = PHY_POLL_LINK_ON; - } else { - if (netif_carrier_ok(dev->ndev)) { - EMAC_RX_CLK_TX(dev->def->index); -#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) - emac_reinitialize(dev); -#endif - netif_carrier_off(dev->ndev); - emac_print_link_status(dev); - } - - /* Retry reset if the previous attempt failed. - * This is needed mostly for CONFIG_IBM_EMAC_PHY_RX_CLK_FIX - * case, but I left it here because it shouldn't trigger for - * sane PHYs anyway. - */ - if (unlikely(dev->reset_failed)) - emac_reinitialize(dev); - - link_poll_interval = PHY_POLL_LINK_OFF; - } - mod_timer(&dev->link_timer, jiffies + link_poll_interval); -} - -/* BHs disabled */ -static void emac_force_link_update(struct ocp_enet_private *dev) -{ - netif_carrier_off(dev->ndev); - if (timer_pending(&dev->link_timer)) - mod_timer(&dev->link_timer, jiffies + PHY_POLL_LINK_OFF); -} - -/* Process ctx, rtnl_lock semaphore */ -static int emac_close(struct net_device *ndev) -{ - struct ocp_enet_private *dev = ndev->priv; - struct ocp_func_emac_data *emacdata = dev->def->additions; - - DBG("%d: close" NL, dev->def->index); - - local_bh_disable(); - - if (dev->phy.address >= 0) - del_timer_sync(&dev->link_timer); - - netif_stop_queue(ndev); - emac_rx_disable(dev); - emac_tx_disable(dev); - mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan); - mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan); - mal_poll_del(dev->mal, &dev->commac); - local_bh_enable(); - - emac_clean_tx_ring(dev); - emac_clean_rx_ring(dev); - free_irq(dev->def->irq, dev); - - return 0; -} - -static inline u16 emac_tx_csum(struct ocp_enet_private *dev, - struct sk_buff *skb) -{ -#if defined(CONFIG_IBM_EMAC_TAH) - if (skb->ip_summed == CHECKSUM_PARTIAL) { - ++dev->stats.tx_packets_csum; - return EMAC_TX_CTRL_TAH_CSUM; - } -#endif - return 0; -} - -static inline int emac_xmit_finish(struct ocp_enet_private *dev, int len) -{ - struct emac_regs __iomem *p = dev->emacp; - struct net_device *ndev = dev->ndev; - - /* Send the packet out */ - out_be32(&p->tmr0, EMAC_TMR0_XMIT); - - if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) { - netif_stop_queue(ndev); - DBG2("%d: stopped TX queue" NL, dev->def->index); - } - - ndev->trans_start = jiffies; - ++dev->stats.tx_packets; - dev->stats.tx_bytes += len; - - return 0; -} - -/* BHs disabled */ -static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev) -{ - struct ocp_enet_private *dev = ndev->priv; - unsigned int len = skb->len; - int slot; - - u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | - MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb); - - slot = dev->tx_slot++; - if (dev->tx_slot == NUM_TX_BUFF) { - dev->tx_slot = 0; - ctrl |= MAL_TX_CTRL_WRAP; - } - - DBG2("%d: xmit(%u) %d" NL, dev->def->index, len, slot); - - dev->tx_skb[slot] = skb; - dev->tx_desc[slot].data_ptr = dma_map_single(dev->ldev, skb->data, len, - DMA_TO_DEVICE); - dev->tx_desc[slot].data_len = (u16) len; - barrier(); - dev->tx_desc[slot].ctrl = ctrl; - - return emac_xmit_finish(dev, len); -} - -#if defined(CONFIG_IBM_EMAC_TAH) -static inline int emac_xmit_split(struct ocp_enet_private *dev, int slot, - u32 pd, int len, int last, u16 base_ctrl) -{ - while (1) { - u16 ctrl = base_ctrl; - int chunk = min(len, MAL_MAX_TX_SIZE); - len -= chunk; - - slot = (slot + 1) % NUM_TX_BUFF; - - if (last && !len) - ctrl |= MAL_TX_CTRL_LAST; - if (slot == NUM_TX_BUFF - 1) - ctrl |= MAL_TX_CTRL_WRAP; - - dev->tx_skb[slot] = NULL; - dev->tx_desc[slot].data_ptr = pd; - dev->tx_desc[slot].data_len = (u16) chunk; - dev->tx_desc[slot].ctrl = ctrl; - ++dev->tx_cnt; - - if (!len) - break; - - pd += chunk; - } - return slot; -} - -/* BHs disabled (SG version for TAH equipped EMACs) */ -static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev) -{ - struct ocp_enet_private *dev = ndev->priv; - int nr_frags = skb_shinfo(skb)->nr_frags; - int len = skb->len, chunk; - int slot, i; - u16 ctrl; - u32 pd; - - /* This is common "fast" path */ - if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE)) - return emac_start_xmit(skb, ndev); - - len -= skb->data_len; - - /* Note, this is only an *estimation*, we can still run out of empty - * slots because of the additional fragmentation into - * MAL_MAX_TX_SIZE-sized chunks - */ - if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF)) - goto stop_queue; - - ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | - emac_tx_csum(dev, skb); - slot = dev->tx_slot; - - /* skb data */ - dev->tx_skb[slot] = NULL; - chunk = min(len, MAL_MAX_TX_SIZE); - dev->tx_desc[slot].data_ptr = pd = - dma_map_single(dev->ldev, skb->data, len, DMA_TO_DEVICE); - dev->tx_desc[slot].data_len = (u16) chunk; - len -= chunk; - if (unlikely(len)) - slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags, - ctrl); - /* skb fragments */ - for (i = 0; i < nr_frags; ++i) { - struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; - len = frag->size; - - if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF)) - goto undo_frame; - - pd = dma_map_page(dev->ldev, frag->page, frag->page_offset, len, - DMA_TO_DEVICE); - - slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1, - ctrl); - } - - DBG2("%d: xmit_sg(%u) %d - %d" NL, dev->def->index, skb->len, - dev->tx_slot, slot); - - /* Attach skb to the last slot so we don't release it too early */ - dev->tx_skb[slot] = skb; - - /* Send the packet out */ - if (dev->tx_slot == NUM_TX_BUFF - 1) - ctrl |= MAL_TX_CTRL_WRAP; - barrier(); - dev->tx_desc[dev->tx_slot].ctrl = ctrl; - dev->tx_slot = (slot + 1) % NUM_TX_BUFF; - - return emac_xmit_finish(dev, skb->len); - - undo_frame: - /* Well, too bad. Our previous estimation was overly optimistic. - * Undo everything. - */ - while (slot != dev->tx_slot) { - dev->tx_desc[slot].ctrl = 0; - --dev->tx_cnt; - if (--slot < 0) - slot = NUM_TX_BUFF - 1; - } - ++dev->estats.tx_undo; - - stop_queue: - netif_stop_queue(ndev); - DBG2("%d: stopped TX queue" NL, dev->def->index); - return 1; -} -#else -# define emac_start_xmit_sg emac_start_xmit -#endif /* !defined(CONFIG_IBM_EMAC_TAH) */ - -/* BHs disabled */ -static void emac_parse_tx_error(struct ocp_enet_private *dev, u16 ctrl) -{ - struct ibm_emac_error_stats *st = &dev->estats; - DBG("%d: BD TX error %04x" NL, dev->def->index, ctrl); - - ++st->tx_bd_errors; - if (ctrl & EMAC_TX_ST_BFCS) - ++st->tx_bd_bad_fcs; - if (ctrl & EMAC_TX_ST_LCS) - ++st->tx_bd_carrier_loss; - if (ctrl & EMAC_TX_ST_ED) - ++st->tx_bd_excessive_deferral; - if (ctrl & EMAC_TX_ST_EC) - ++st->tx_bd_excessive_collisions; - if (ctrl & EMAC_TX_ST_LC) - ++st->tx_bd_late_collision; - if (ctrl & EMAC_TX_ST_MC) - ++st->tx_bd_multple_collisions; - if (ctrl & EMAC_TX_ST_SC) - ++st->tx_bd_single_collision; - if (ctrl & EMAC_TX_ST_UR) - ++st->tx_bd_underrun; - if (ctrl & EMAC_TX_ST_SQE) - ++st->tx_bd_sqe; -} - -static void emac_poll_tx(void *param) -{ - struct ocp_enet_private *dev = param; - DBG2("%d: poll_tx, %d %d" NL, dev->def->index, dev->tx_cnt, - dev->ack_slot); - - if (dev->tx_cnt) { - u16 ctrl; - int slot = dev->ack_slot, n = 0; - again: - ctrl = dev->tx_desc[slot].ctrl; - if (!(ctrl & MAL_TX_CTRL_READY)) { - struct sk_buff *skb = dev->tx_skb[slot]; - ++n; - - if (skb) { - dev_kfree_skb(skb); - dev->tx_skb[slot] = NULL; - } - slot = (slot + 1) % NUM_TX_BUFF; - - if (unlikely(EMAC_IS_BAD_TX(ctrl))) - emac_parse_tx_error(dev, ctrl); - - if (--dev->tx_cnt) - goto again; - } - if (n) { - dev->ack_slot = slot; - if (netif_queue_stopped(dev->ndev) && - dev->tx_cnt < EMAC_TX_WAKEUP_THRESH) - netif_wake_queue(dev->ndev); - - DBG2("%d: tx %d pkts" NL, dev->def->index, n); - } - } -} - -static inline void emac_recycle_rx_skb(struct ocp_enet_private *dev, int slot, - int len) -{ - struct sk_buff *skb = dev->rx_skb[slot]; - DBG2("%d: recycle %d %d" NL, dev->def->index, slot, len); - - if (len) - dma_map_single(dev->ldev, skb->data - 2, - EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE); - - dev->rx_desc[slot].data_len = 0; - barrier(); - dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | - (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); -} - -static void emac_parse_rx_error(struct ocp_enet_private *dev, u16 ctrl) -{ - struct ibm_emac_error_stats *st = &dev->estats; - DBG("%d: BD RX error %04x" NL, dev->def->index, ctrl); - - ++st->rx_bd_errors; - if (ctrl & EMAC_RX_ST_OE) - ++st->rx_bd_overrun; - if (ctrl & EMAC_RX_ST_BP) - ++st->rx_bd_bad_packet; - if (ctrl & EMAC_RX_ST_RP) - ++st->rx_bd_runt_packet; - if (ctrl & EMAC_RX_ST_SE) - ++st->rx_bd_short_event; - if (ctrl & EMAC_RX_ST_AE) - ++st->rx_bd_alignment_error; - if (ctrl & EMAC_RX_ST_BFCS) - ++st->rx_bd_bad_fcs; - if (ctrl & EMAC_RX_ST_PTL) - ++st->rx_bd_packet_too_long; - if (ctrl & EMAC_RX_ST_ORE) - ++st->rx_bd_out_of_range; - if (ctrl & EMAC_RX_ST_IRE) - ++st->rx_bd_in_range; -} - -static inline void emac_rx_csum(struct ocp_enet_private *dev, - struct sk_buff *skb, u16 ctrl) -{ -#if defined(CONFIG_IBM_EMAC_TAH) - if (!ctrl && dev->tah_dev) { - skb->ip_summed = CHECKSUM_UNNECESSARY; - ++dev->stats.rx_packets_csum; - } -#endif -} - -static inline int emac_rx_sg_append(struct ocp_enet_private *dev, int slot) -{ - if (likely(dev->rx_sg_skb != NULL)) { - int len = dev->rx_desc[slot].data_len; - int tot_len = dev->rx_sg_skb->len + len; - - if (unlikely(tot_len + 2 > dev->rx_skb_size)) { - ++dev->estats.rx_dropped_mtu; - dev_kfree_skb(dev->rx_sg_skb); - dev->rx_sg_skb = NULL; - } else { - cacheable_memcpy(skb_tail_pointer(dev->rx_sg_skb), - dev->rx_skb[slot]->data, len); - skb_put(dev->rx_sg_skb, len); - emac_recycle_rx_skb(dev, slot, len); - return 0; - } - } - emac_recycle_rx_skb(dev, slot, 0); - return -1; -} - -/* BHs disabled */ -static int emac_poll_rx(void *param, int budget) -{ - struct ocp_enet_private *dev = param; - int slot = dev->rx_slot, received = 0; - - DBG2("%d: poll_rx(%d)" NL, dev->def->index, budget); - - again: - while (budget > 0) { - int len; - struct sk_buff *skb; - u16 ctrl = dev->rx_desc[slot].ctrl; - - if (ctrl & MAL_RX_CTRL_EMPTY) - break; - - skb = dev->rx_skb[slot]; - barrier(); - len = dev->rx_desc[slot].data_len; - - if (unlikely(!MAL_IS_SINGLE_RX(ctrl))) - goto sg; - - ctrl &= EMAC_BAD_RX_MASK; - if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { - emac_parse_rx_error(dev, ctrl); - ++dev->estats.rx_dropped_error; - emac_recycle_rx_skb(dev, slot, 0); - len = 0; - goto next; - } - - if (len && len < EMAC_RX_COPY_THRESH) { - struct sk_buff *copy_skb = - alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC); - if (unlikely(!copy_skb)) - goto oom; - - skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2); - cacheable_memcpy(copy_skb->data - 2, skb->data - 2, - len + 2); - emac_recycle_rx_skb(dev, slot, len); - skb = copy_skb; - } else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) - goto oom; - - skb_put(skb, len); - push_packet: - skb->protocol = eth_type_trans(skb, dev->ndev); - emac_rx_csum(dev, skb, ctrl); - - if (unlikely(netif_receive_skb(skb) == NET_RX_DROP)) - ++dev->estats.rx_dropped_stack; - next: - ++dev->stats.rx_packets; - skip: - dev->stats.rx_bytes += len; - slot = (slot + 1) % NUM_RX_BUFF; - --budget; - ++received; - continue; - sg: - if (ctrl & MAL_RX_CTRL_FIRST) { - BUG_ON(dev->rx_sg_skb); - if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) { - DBG("%d: rx OOM %d" NL, dev->def->index, slot); - ++dev->estats.rx_dropped_oom; - emac_recycle_rx_skb(dev, slot, 0); - } else { - dev->rx_sg_skb = skb; - skb_put(skb, len); - } - } else if (!emac_rx_sg_append(dev, slot) && - (ctrl & MAL_RX_CTRL_LAST)) { - - skb = dev->rx_sg_skb; - dev->rx_sg_skb = NULL; - - ctrl &= EMAC_BAD_RX_MASK; - if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { - emac_parse_rx_error(dev, ctrl); - ++dev->estats.rx_dropped_error; - dev_kfree_skb(skb); - len = 0; - } else - goto push_packet; - } - goto skip; - oom: - DBG("%d: rx OOM %d" NL, dev->def->index, slot); - /* Drop the packet and recycle skb */ - ++dev->estats.rx_dropped_oom; - emac_recycle_rx_skb(dev, slot, 0); - goto next; - } - - if (received) { - DBG2("%d: rx %d BDs" NL, dev->def->index, received); - dev->rx_slot = slot; - } - - if (unlikely(budget && dev->commac.rx_stopped)) { - struct ocp_func_emac_data *emacdata = dev->def->additions; - - barrier(); - if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) { - DBG2("%d: rx restart" NL, dev->def->index); - received = 0; - goto again; - } - - if (dev->rx_sg_skb) { - DBG2("%d: dropping partial rx packet" NL, - dev->def->index); - ++dev->estats.rx_dropped_error; - dev_kfree_skb(dev->rx_sg_skb); - dev->rx_sg_skb = NULL; - } - - dev->commac.rx_stopped = 0; - mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); - emac_rx_enable(dev); - dev->rx_slot = 0; - } - return received; -} - -/* BHs disabled */ -static int emac_peek_rx(void *param) -{ - struct ocp_enet_private *dev = param; - return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY); -} - -/* BHs disabled */ -static int emac_peek_rx_sg(void *param) -{ - struct ocp_enet_private *dev = param; - int slot = dev->rx_slot; - while (1) { - u16 ctrl = dev->rx_desc[slot].ctrl; - if (ctrl & MAL_RX_CTRL_EMPTY) - return 0; - else if (ctrl & MAL_RX_CTRL_LAST) - return 1; - - slot = (slot + 1) % NUM_RX_BUFF; - - /* I'm just being paranoid here :) */ - if (unlikely(slot == dev->rx_slot)) - return 0; - } -} - -/* Hard IRQ */ -static void emac_rxde(void *param) -{ - struct ocp_enet_private *dev = param; - ++dev->estats.rx_stopped; - emac_rx_disable_async(dev); -} - -/* Hard IRQ */ -static irqreturn_t emac_irq(int irq, void *dev_instance) -{ - struct ocp_enet_private *dev = dev_instance; - struct emac_regs __iomem *p = dev->emacp; - struct ibm_emac_error_stats *st = &dev->estats; - - u32 isr = in_be32(&p->isr); - out_be32(&p->isr, isr); - - DBG("%d: isr = %08x" NL, dev->def->index, isr); - - if (isr & EMAC_ISR_TXPE) - ++st->tx_parity; - if (isr & EMAC_ISR_RXPE) - ++st->rx_parity; - if (isr & EMAC_ISR_TXUE) - ++st->tx_underrun; - if (isr & EMAC_ISR_RXOE) - ++st->rx_fifo_overrun; - if (isr & EMAC_ISR_OVR) - ++st->rx_overrun; - if (isr & EMAC_ISR_BP) - ++st->rx_bad_packet; - if (isr & EMAC_ISR_RP) - ++st->rx_runt_packet; - if (isr & EMAC_ISR_SE) - ++st->rx_short_event; - if (isr & EMAC_ISR_ALE) - ++st->rx_alignment_error; - if (isr & EMAC_ISR_BFCS) - ++st->rx_bad_fcs; - if (isr & EMAC_ISR_PTLE) - ++st->rx_packet_too_long; - if (isr & EMAC_ISR_ORE) - ++st->rx_out_of_range; - if (isr & EMAC_ISR_IRE) - ++st->rx_in_range; - if (isr & EMAC_ISR_SQE) - ++st->tx_sqe; - if (isr & EMAC_ISR_TE) - ++st->tx_errors; - - return IRQ_HANDLED; -} - -static struct net_device_stats *emac_stats(struct net_device *ndev) -{ - struct ocp_enet_private *dev = ndev->priv; - struct ibm_emac_stats *st = &dev->stats; - struct ibm_emac_error_stats *est = &dev->estats; - struct net_device_stats *nst = &dev->nstats; - - DBG2("%d: stats" NL, dev->def->index); - - /* Compute "legacy" statistics */ - local_irq_disable(); - nst->rx_packets = (unsigned long)st->rx_packets; - nst->rx_bytes = (unsigned long)st->rx_bytes; - nst->tx_packets = (unsigned long)st->tx_packets; - nst->tx_bytes = (unsigned long)st->tx_bytes; - nst->rx_dropped = (unsigned long)(est->rx_dropped_oom + - est->rx_dropped_error + - est->rx_dropped_resize + - est->rx_dropped_mtu); - nst->tx_dropped = (unsigned long)est->tx_dropped; - - nst->rx_errors = (unsigned long)est->rx_bd_errors; - nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun + - est->rx_fifo_overrun + - est->rx_overrun); - nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error + - est->rx_alignment_error); - nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs + - est->rx_bad_fcs); - nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet + - est->rx_bd_short_event + - est->rx_bd_packet_too_long + - est->rx_bd_out_of_range + - est->rx_bd_in_range + - est->rx_runt_packet + - est->rx_short_event + - est->rx_packet_too_long + - est->rx_out_of_range + - est->rx_in_range); - - nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors); - nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun + - est->tx_underrun); - nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss; - nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral + - est->tx_bd_excessive_collisions + - est->tx_bd_late_collision + - est->tx_bd_multple_collisions); - local_irq_enable(); - return nst; -} - -static void emac_remove(struct ocp_device *ocpdev) -{ - struct ocp_enet_private *dev = ocp_get_drvdata(ocpdev); - - DBG("%d: remove" NL, dev->def->index); - - ocp_set_drvdata(ocpdev, NULL); - unregister_netdev(dev->ndev); - - tah_fini(dev->tah_dev); - rgmii_fini(dev->rgmii_dev, dev->rgmii_input); - zmii_fini(dev->zmii_dev, dev->zmii_input); - - emac_dbg_register(dev->def->index, NULL); - - mal_unregister_commac(dev->mal, &dev->commac); - iounmap(dev->emacp); - kfree(dev->ndev); -} - -static struct mal_commac_ops emac_commac_ops = { - .poll_tx = &emac_poll_tx, - .poll_rx = &emac_poll_rx, - .peek_rx = &emac_peek_rx, - .rxde = &emac_rxde, -}; - -static struct mal_commac_ops emac_commac_sg_ops = { - .poll_tx = &emac_poll_tx, - .poll_rx = &emac_poll_rx, - .peek_rx = &emac_peek_rx_sg, - .rxde = &emac_rxde, -}; - -/* Ethtool support */ -static int emac_ethtool_get_settings(struct net_device *ndev, - struct ethtool_cmd *cmd) -{ - struct ocp_enet_private *dev = ndev->priv; - - cmd->supported = dev->phy.features; - cmd->port = PORT_MII; - cmd->phy_address = dev->phy.address; - cmd->transceiver = - dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL; - - local_bh_disable(); - cmd->advertising = dev->phy.advertising; - cmd->autoneg = dev->phy.autoneg; - cmd->speed = dev->phy.speed; - cmd->duplex = dev->phy.duplex; - local_bh_enable(); - - return 0; -} - -static int emac_ethtool_set_settings(struct net_device *ndev, - struct ethtool_cmd *cmd) -{ - struct ocp_enet_private *dev = ndev->priv; - u32 f = dev->phy.features; - - DBG("%d: set_settings(%d, %d, %d, 0x%08x)" NL, dev->def->index, - cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising); - - /* Basic sanity checks */ - if (dev->phy.address < 0) - return -EOPNOTSUPP; - if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE) - return -EINVAL; - if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0) - return -EINVAL; - if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) - return -EINVAL; - - if (cmd->autoneg == AUTONEG_DISABLE) { - switch (cmd->speed) { - case SPEED_10: - if (cmd->duplex == DUPLEX_HALF - && !(f & SUPPORTED_10baseT_Half)) - return -EINVAL; - if (cmd->duplex == DUPLEX_FULL - && !(f & SUPPORTED_10baseT_Full)) - return -EINVAL; - break; - case SPEED_100: - if (cmd->duplex == DUPLEX_HALF - && !(f & SUPPORTED_100baseT_Half)) - return -EINVAL; - if (cmd->duplex == DUPLEX_FULL - && !(f & SUPPORTED_100baseT_Full)) - return -EINVAL; - break; - case SPEED_1000: - if (cmd->duplex == DUPLEX_HALF - && !(f & SUPPORTED_1000baseT_Half)) - return -EINVAL; - if (cmd->duplex == DUPLEX_FULL - && !(f & SUPPORTED_1000baseT_Full)) - return -EINVAL; - break; - default: - return -EINVAL; - } - - local_bh_disable(); - dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed, - cmd->duplex); - - } else { - if (!(f & SUPPORTED_Autoneg)) - return -EINVAL; - - local_bh_disable(); - dev->phy.def->ops->setup_aneg(&dev->phy, - (cmd->advertising & f) | - (dev->phy.advertising & - (ADVERTISED_Pause | - ADVERTISED_Asym_Pause))); - } - emac_force_link_update(dev); - local_bh_enable(); - - return 0; -} - -static void emac_ethtool_get_ringparam(struct net_device *ndev, - struct ethtool_ringparam *rp) -{ - rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF; - rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF; -} - -static void emac_ethtool_get_pauseparam(struct net_device *ndev, - struct ethtool_pauseparam *pp) -{ - struct ocp_enet_private *dev = ndev->priv; - - local_bh_disable(); - if ((dev->phy.features & SUPPORTED_Autoneg) && - (dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause))) - pp->autoneg = 1; - - if (dev->phy.duplex == DUPLEX_FULL) { - if (dev->phy.pause) - pp->rx_pause = pp->tx_pause = 1; - else if (dev->phy.asym_pause) - pp->tx_pause = 1; - } - local_bh_enable(); -} - -static u32 emac_ethtool_get_rx_csum(struct net_device *ndev) -{ - struct ocp_enet_private *dev = ndev->priv; - return dev->tah_dev != 0; -} - -static int emac_get_regs_len(struct ocp_enet_private *dev) -{ - return sizeof(struct emac_ethtool_regs_subhdr) + EMAC_ETHTOOL_REGS_SIZE; -} - -static int emac_ethtool_get_regs_len(struct net_device *ndev) -{ - struct ocp_enet_private *dev = ndev->priv; - return sizeof(struct emac_ethtool_regs_hdr) + - emac_get_regs_len(dev) + mal_get_regs_len(dev->mal) + - zmii_get_regs_len(dev->zmii_dev) + - rgmii_get_regs_len(dev->rgmii_dev) + - tah_get_regs_len(dev->tah_dev); -} - -static void *emac_dump_regs(struct ocp_enet_private *dev, void *buf) -{ - struct emac_ethtool_regs_subhdr *hdr = buf; - - hdr->version = EMAC_ETHTOOL_REGS_VER; - hdr->index = dev->def->index; - memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE); - return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE); -} - -static void emac_ethtool_get_regs(struct net_device *ndev, - struct ethtool_regs *regs, void *buf) -{ - struct ocp_enet_private *dev = ndev->priv; - struct emac_ethtool_regs_hdr *hdr = buf; - - hdr->components = 0; - buf = hdr + 1; - - local_irq_disable(); - buf = mal_dump_regs(dev->mal, buf); - buf = emac_dump_regs(dev, buf); - if (dev->zmii_dev) { - hdr->components |= EMAC_ETHTOOL_REGS_ZMII; - buf = zmii_dump_regs(dev->zmii_dev, buf); - } - if (dev->rgmii_dev) { - hdr->components |= EMAC_ETHTOOL_REGS_RGMII; - buf = rgmii_dump_regs(dev->rgmii_dev, buf); - } - if (dev->tah_dev) { - hdr->components |= EMAC_ETHTOOL_REGS_TAH; - buf = tah_dump_regs(dev->tah_dev, buf); - } - local_irq_enable(); -} - -static int emac_ethtool_nway_reset(struct net_device *ndev) -{ - struct ocp_enet_private *dev = ndev->priv; - int res = 0; - - DBG("%d: nway_reset" NL, dev->def->index); - - if (dev->phy.address < 0) - return -EOPNOTSUPP; - - local_bh_disable(); - if (!dev->phy.autoneg) { - res = -EINVAL; - goto out; - } - - dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising); - emac_force_link_update(dev); - - out: - local_bh_enable(); - return res; -} - -static int emac_get_sset_count(struct net_device *ndev, int sset) -{ - switch (sset) { - case ETH_SS_STATS: - return EMAC_ETHTOOL_STATS_COUNT; - default: - return -EOPNOTSUPP; - } -} - -static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset, - u8 * buf) -{ - if (stringset == ETH_SS_STATS) - memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys)); -} - -static void emac_ethtool_get_ethtool_stats(struct net_device *ndev, - struct ethtool_stats *estats, - u64 * tmp_stats) -{ - struct ocp_enet_private *dev = ndev->priv; - local_irq_disable(); - memcpy(tmp_stats, &dev->stats, sizeof(dev->stats)); - tmp_stats += sizeof(dev->stats) / sizeof(u64); - memcpy(tmp_stats, &dev->estats, sizeof(dev->estats)); - local_irq_enable(); -} - -static void emac_ethtool_get_drvinfo(struct net_device *ndev, - struct ethtool_drvinfo *info) -{ - struct ocp_enet_private *dev = ndev->priv; - - strcpy(info->driver, "ibm_emac"); - strcpy(info->version, DRV_VERSION); - info->fw_version[0] = '\0'; - sprintf(info->bus_info, "PPC 4xx EMAC %d", dev->def->index); - info->regdump_len = emac_ethtool_get_regs_len(ndev); -} - -static const struct ethtool_ops emac_ethtool_ops = { - .get_settings = emac_ethtool_get_settings, - .set_settings = emac_ethtool_set_settings, - .get_drvinfo = emac_ethtool_get_drvinfo, - - .get_regs_len = emac_ethtool_get_regs_len, - .get_regs = emac_ethtool_get_regs, - - .nway_reset = emac_ethtool_nway_reset, - - .get_ringparam = emac_ethtool_get_ringparam, - .get_pauseparam = emac_ethtool_get_pauseparam, - - .get_rx_csum = emac_ethtool_get_rx_csum, - - .get_strings = emac_ethtool_get_strings, - .get_sset_count = emac_get_sset_count, - .get_ethtool_stats = emac_ethtool_get_ethtool_stats, - - .get_link = ethtool_op_get_link, -}; - -static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) -{ - struct ocp_enet_private *dev = ndev->priv; - uint16_t *data = (uint16_t *) & rq->ifr_ifru; - - DBG("%d: ioctl %08x" NL, dev->def->index, cmd); - - if (dev->phy.address < 0) - return -EOPNOTSUPP; - - switch (cmd) { - case SIOCGMIIPHY: - case SIOCDEVPRIVATE: - data[0] = dev->phy.address; - /* Fall through */ - case SIOCGMIIREG: - case SIOCDEVPRIVATE + 1: - data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]); - return 0; - - case SIOCSMIIREG: - case SIOCDEVPRIVATE + 2: - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - emac_mdio_write(ndev, dev->phy.address, data[1], data[2]); - return 0; - default: - return -EOPNOTSUPP; - } -} - -static int __init emac_probe(struct ocp_device *ocpdev) -{ - struct ocp_func_emac_data *emacdata = ocpdev->def->additions; - struct net_device *ndev; - struct ocp_device *maldev; - struct ocp_enet_private *dev; - int err, i; - DECLARE_MAC_BUF(mac); - - DBG("%d: probe" NL, ocpdev->def->index); - - if (!emacdata) { - printk(KERN_ERR "emac%d: Missing additional data!\n", - ocpdev->def->index); - return -ENODEV; - } - - /* Allocate our net_device structure */ - ndev = alloc_etherdev(sizeof(struct ocp_enet_private)); - if (!ndev) { - printk(KERN_ERR "emac%d: could not allocate ethernet device!\n", - ocpdev->def->index); - return -ENOMEM; - } - dev = ndev->priv; - dev->ndev = ndev; - dev->ldev = &ocpdev->dev; - dev->def = ocpdev->def; - - /* Find MAL device we are connected to */ - maldev = - ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_MAL, emacdata->mal_idx); - if (!maldev) { - printk(KERN_ERR "emac%d: unknown mal%d device!\n", - dev->def->index, emacdata->mal_idx); - err = -ENODEV; - goto out; - } - dev->mal = ocp_get_drvdata(maldev); - if (!dev->mal) { - printk(KERN_ERR "emac%d: mal%d hasn't been initialized yet!\n", - dev->def->index, emacdata->mal_idx); - err = -ENODEV; - goto out; - } - - /* Register with MAL */ - dev->commac.ops = &emac_commac_ops; - dev->commac.dev = dev; - dev->commac.tx_chan_mask = MAL_CHAN_MASK(emacdata->mal_tx_chan); - dev->commac.rx_chan_mask = MAL_CHAN_MASK(emacdata->mal_rx_chan); - err = mal_register_commac(dev->mal, &dev->commac); - if (err) { - printk(KERN_ERR "emac%d: failed to register with mal%d!\n", - dev->def->index, emacdata->mal_idx); - goto out; - } - dev->rx_skb_size = emac_rx_skb_size(ndev->mtu); - dev->rx_sync_size = emac_rx_sync_size(ndev->mtu); - - /* Get pointers to BD rings */ - dev->tx_desc = - dev->mal->bd_virt + mal_tx_bd_offset(dev->mal, - emacdata->mal_tx_chan); - dev->rx_desc = - dev->mal->bd_virt + mal_rx_bd_offset(dev->mal, - emacdata->mal_rx_chan); - - DBG("%d: tx_desc %p" NL, ocpdev->def->index, dev->tx_desc); - DBG("%d: rx_desc %p" NL, ocpdev->def->index, dev->rx_desc); - - /* Clean rings */ - memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor)); - memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor)); - - /* If we depend on another EMAC for MDIO, check whether it was probed already */ - if (emacdata->mdio_idx >= 0 && emacdata->mdio_idx != ocpdev->def->index) { - struct ocp_device *mdiodev = - ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, - emacdata->mdio_idx); - if (!mdiodev) { - printk(KERN_ERR "emac%d: unknown emac%d device!\n", - dev->def->index, emacdata->mdio_idx); - err = -ENODEV; - goto out2; - } - dev->mdio_dev = ocp_get_drvdata(mdiodev); - if (!dev->mdio_dev) { - printk(KERN_ERR - "emac%d: emac%d hasn't been initialized yet!\n", - dev->def->index, emacdata->mdio_idx); - err = -ENODEV; - goto out2; - } - } - - /* Attach to ZMII, if needed */ - if ((err = zmii_attach(dev)) != 0) - goto out2; - - /* Attach to RGMII, if needed */ - if ((err = rgmii_attach(dev)) != 0) - goto out3; - - /* Attach to TAH, if needed */ - if ((err = tah_attach(dev)) != 0) - goto out4; - - /* Map EMAC regs */ - dev->emacp = ioremap(dev->def->paddr, sizeof(struct emac_regs)); - if (!dev->emacp) { - printk(KERN_ERR "emac%d: could not ioremap device registers!\n", - dev->def->index); - err = -ENOMEM; - goto out5; - } - - /* Fill in MAC address */ - for (i = 0; i < 6; ++i) - ndev->dev_addr[i] = emacdata->mac_addr[i]; - - /* Set some link defaults before we can find out real parameters */ - dev->phy.speed = SPEED_100; - dev->phy.duplex = DUPLEX_FULL; - dev->phy.autoneg = AUTONEG_DISABLE; - dev->phy.pause = dev->phy.asym_pause = 0; - dev->stop_timeout = STOP_TIMEOUT_100; - init_timer(&dev->link_timer); - dev->link_timer.function = emac_link_timer; - dev->link_timer.data = (unsigned long)dev; - - /* Find PHY if any */ - dev->phy.dev = ndev; - dev->phy.mode = emacdata->phy_mode; - if (emacdata->phy_map != 0xffffffff) { - u32 phy_map = emacdata->phy_map | busy_phy_map; - u32 adv; - - DBG("%d: PHY maps %08x %08x" NL, dev->def->index, - emacdata->phy_map, busy_phy_map); - - EMAC_RX_CLK_TX(dev->def->index); - - dev->phy.mdio_read = emac_mdio_read; - dev->phy.mdio_write = emac_mdio_write; - - /* Configure EMAC with defaults so we can at least use MDIO - * This is needed mostly for 440GX - */ - if (emac_phy_gpcs(dev->phy.mode)) { - /* XXX - * Make GPCS PHY address equal to EMAC index. - * We probably should take into account busy_phy_map - * and/or phy_map here. - */ - dev->phy.address = dev->def->index; - } - - emac_configure(dev); - - for (i = 0; i < 0x20; phy_map >>= 1, ++i) - if (!(phy_map & 1)) { - int r; - busy_phy_map |= 1 << i; - - /* Quick check if there is a PHY at the address */ - r = emac_mdio_read(dev->ndev, i, MII_BMCR); - if (r == 0xffff || r < 0) - continue; - if (!mii_phy_probe(&dev->phy, i)) - break; - } - if (i == 0x20) { - printk(KERN_WARNING "emac%d: can't find PHY!\n", - dev->def->index); - goto out6; - } - - /* Init PHY */ - if (dev->phy.def->ops->init) - dev->phy.def->ops->init(&dev->phy); - - /* Disable any PHY features not supported by the platform */ - dev->phy.def->features &= ~emacdata->phy_feat_exc; - - /* Setup initial link parameters */ - if (dev->phy.features & SUPPORTED_Autoneg) { - adv = dev->phy.features; -#if !defined(CONFIG_40x) - adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause; -#endif - /* Restart autonegotiation */ - dev->phy.def->ops->setup_aneg(&dev->phy, adv); - } else { - u32 f = dev->phy.def->features; - int speed = SPEED_10, fd = DUPLEX_HALF; - - /* Select highest supported speed/duplex */ - if (f & SUPPORTED_1000baseT_Full) { - speed = SPEED_1000; - fd = DUPLEX_FULL; - } else if (f & SUPPORTED_1000baseT_Half) - speed = SPEED_1000; - else if (f & SUPPORTED_100baseT_Full) { - speed = SPEED_100; - fd = DUPLEX_FULL; - } else if (f & SUPPORTED_100baseT_Half) - speed = SPEED_100; - else if (f & SUPPORTED_10baseT_Full) - fd = DUPLEX_FULL; - - /* Force link parameters */ - dev->phy.def->ops->setup_forced(&dev->phy, speed, fd); - } - } else { - emac_reset(dev); - - /* PHY-less configuration. - * XXX I probably should move these settings to emacdata - */ - dev->phy.address = -1; - dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII; - dev->phy.pause = 1; - } - - /* Fill in the driver function table */ - ndev->open = &emac_open; - if (dev->tah_dev) { - ndev->hard_start_xmit = &emac_start_xmit_sg; - ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; - } else - ndev->hard_start_xmit = &emac_start_xmit; - ndev->tx_timeout = &emac_full_tx_reset; - ndev->watchdog_timeo = 5 * HZ; - ndev->stop = &emac_close; - ndev->get_stats = &emac_stats; - ndev->set_multicast_list = &emac_set_multicast_list; - ndev->do_ioctl = &emac_ioctl; - if (emac_phy_supports_gige(emacdata->phy_mode)) { - ndev->change_mtu = &emac_change_mtu; - dev->commac.ops = &emac_commac_sg_ops; - } - SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops); - - netif_carrier_off(ndev); - netif_stop_queue(ndev); - - err = register_netdev(ndev); - if (err) { - printk(KERN_ERR "emac%d: failed to register net device (%d)!\n", - dev->def->index, err); - goto out6; - } - - ocp_set_drvdata(ocpdev, dev); - - printk("%s: emac%d, MAC %s\n", - ndev->name, dev->def->index, print_mac(mac, ndev->dev_addr)); - - if (dev->phy.address >= 0) - printk("%s: found %s PHY (0x%02x)\n", ndev->name, - dev->phy.def->name, dev->phy.address); - - emac_dbg_register(dev->def->index, dev); - - return 0; - out6: - iounmap(dev->emacp); - out5: - tah_fini(dev->tah_dev); - out4: - rgmii_fini(dev->rgmii_dev, dev->rgmii_input); - out3: - zmii_fini(dev->zmii_dev, dev->zmii_input); - out2: - mal_unregister_commac(dev->mal, &dev->commac); - out: - kfree(ndev); - return err; -} - -static struct ocp_device_id emac_ids[] = { - { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_EMAC }, - { .vendor = OCP_VENDOR_INVALID} -}; - -static struct ocp_driver emac_driver = { - .name = "emac", - .id_table = emac_ids, - .probe = emac_probe, - .remove = emac_remove, -}; - -static int __init emac_init(void) -{ - printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n"); - - DBG(": init" NL); - - if (mal_init()) - return -ENODEV; - - EMAC_CLK_INTERNAL; - if (ocp_register_driver(&emac_driver)) { - EMAC_CLK_EXTERNAL; - ocp_unregister_driver(&emac_driver); - mal_exit(); - return -ENODEV; - } - EMAC_CLK_EXTERNAL; - - emac_init_debug(); - return 0; -} - -static void __exit emac_exit(void) -{ - DBG(": exit" NL); - ocp_unregister_driver(&emac_driver); - mal_exit(); - emac_fini_debug(); -} - -module_init(emac_init); -module_exit(emac_exit); diff --git a/drivers/net/ibm_emac/ibm_emac_core.h b/drivers/net/ibm_emac/ibm_emac_core.h deleted file mode 100644 index dabb94afeb98..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_core.h +++ /dev/null @@ -1,222 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_core.h - * - * Driver for PowerPC 4xx on-chip ethernet controller. - * - * Copyright (c) 2004, 2005 Zultys Technologies. - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * - * Based on original work by - * Armin Kuster <akuster@mvista.com> - * Johnnie Peters <jpeters@mvista.com> - * Copyright 2000, 2001 MontaVista Softare Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#ifndef __IBM_EMAC_CORE_H_ -#define __IBM_EMAC_CORE_H_ - -#include <linux/netdevice.h> -#include <linux/dma-mapping.h> -#include <asm/ocp.h> - -#include "ibm_emac.h" -#include "ibm_emac_phy.h" -#include "ibm_emac_zmii.h" -#include "ibm_emac_rgmii.h" -#include "ibm_emac_mal.h" -#include "ibm_emac_tah.h" - -#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB -#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB - -/* Simple sanity check */ -#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256 -#error Invalid number of buffer descriptors (greater than 256) -#endif - -// XXX -#define EMAC_MIN_MTU 46 -#define EMAC_MAX_MTU 9000 - -/* Maximum L2 header length (VLAN tagged, no FCS) */ -#define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4) - -/* RX BD size for the given MTU */ -static inline int emac_rx_size(int mtu) -{ - if (mtu > ETH_DATA_LEN) - return MAL_MAX_RX_SIZE; - else - return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD); -} - -#define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment()) - -#define EMAC_RX_SKB_HEADROOM \ - EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM) - -/* Size of RX skb for the given MTU */ -static inline int emac_rx_skb_size(int mtu) -{ - int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu)); - return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM; -} - -/* RX DMA sync size */ -static inline int emac_rx_sync_size(int mtu) -{ - return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2); -} - -/* Driver statistcs is split into two parts to make it more cache friendly: - * - normal statistics (packet count, etc) - * - error statistics - * - * When statistics is requested by ethtool, these parts are concatenated, - * normal one goes first. - * - * Please, keep these structures in sync with emac_stats_keys. - */ - -/* Normal TX/RX Statistics */ -struct ibm_emac_stats { - u64 rx_packets; - u64 rx_bytes; - u64 tx_packets; - u64 tx_bytes; - u64 rx_packets_csum; - u64 tx_packets_csum; -}; - -/* Error statistics */ -struct ibm_emac_error_stats { - u64 tx_undo; - - /* Software RX Errors */ - u64 rx_dropped_stack; - u64 rx_dropped_oom; - u64 rx_dropped_error; - u64 rx_dropped_resize; - u64 rx_dropped_mtu; - u64 rx_stopped; - /* BD reported RX errors */ - u64 rx_bd_errors; - u64 rx_bd_overrun; - u64 rx_bd_bad_packet; - u64 rx_bd_runt_packet; - u64 rx_bd_short_event; - u64 rx_bd_alignment_error; - u64 rx_bd_bad_fcs; - u64 rx_bd_packet_too_long; - u64 rx_bd_out_of_range; - u64 rx_bd_in_range; - /* EMAC IRQ reported RX errors */ - u64 rx_parity; - u64 rx_fifo_overrun; - u64 rx_overrun; - u64 rx_bad_packet; - u64 rx_runt_packet; - u64 rx_short_event; - u64 rx_alignment_error; - u64 rx_bad_fcs; - u64 rx_packet_too_long; - u64 rx_out_of_range; - u64 rx_in_range; - - /* Software TX Errors */ - u64 tx_dropped; - /* BD reported TX errors */ - u64 tx_bd_errors; - u64 tx_bd_bad_fcs; - u64 tx_bd_carrier_loss; - u64 tx_bd_excessive_deferral; - u64 tx_bd_excessive_collisions; - u64 tx_bd_late_collision; - u64 tx_bd_multple_collisions; - u64 tx_bd_single_collision; - u64 tx_bd_underrun; - u64 tx_bd_sqe; - /* EMAC IRQ reported TX errors */ - u64 tx_parity; - u64 tx_underrun; - u64 tx_sqe; - u64 tx_errors; -}; - -#define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct ibm_emac_stats) + \ - sizeof(struct ibm_emac_error_stats)) \ - / sizeof(u64)) - -struct ocp_enet_private { - struct net_device *ndev; /* 0 */ - struct emac_regs __iomem *emacp; - - struct mal_descriptor *tx_desc; - int tx_cnt; - int tx_slot; - int ack_slot; - - struct mal_descriptor *rx_desc; - int rx_slot; - struct sk_buff *rx_sg_skb; /* 1 */ - int rx_skb_size; - int rx_sync_size; - - struct ibm_emac_stats stats; - struct ocp_device *tah_dev; - - struct ibm_ocp_mal *mal; - struct mal_commac commac; - - struct sk_buff *tx_skb[NUM_TX_BUFF]; - struct sk_buff *rx_skb[NUM_RX_BUFF]; - - struct ocp_device *zmii_dev; - int zmii_input; - struct ocp_enet_private *mdio_dev; - struct ocp_device *rgmii_dev; - int rgmii_input; - - struct ocp_def *def; - - struct mii_phy phy; - struct timer_list link_timer; - int reset_failed; - - int stop_timeout; /* in us */ - - struct ibm_emac_error_stats estats; - struct net_device_stats nstats; - - struct device* ldev; -}; - -/* Ethtool get_regs complex data. - * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH - * when available. - * - * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr, - * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers. - * Each register component is preceded with emac_ethtool_regs_subhdr. - * Order of the optional headers follows their relative bit posititions - * in emac_ethtool_regs_hdr.components - */ -#define EMAC_ETHTOOL_REGS_ZMII 0x00000001 -#define EMAC_ETHTOOL_REGS_RGMII 0x00000002 -#define EMAC_ETHTOOL_REGS_TAH 0x00000004 - -struct emac_ethtool_regs_hdr { - u32 components; -}; - -struct emac_ethtool_regs_subhdr { - u32 version; - u32 index; -}; - -#endif /* __IBM_EMAC_CORE_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_debug.c b/drivers/net/ibm_emac/ibm_emac_debug.c deleted file mode 100644 index 1f70906cfb98..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_debug.c +++ /dev/null @@ -1,211 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_debug.c - * - * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines. - * - * Copyright (c) 2004, 2005 Zultys Technologies - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/netdevice.h> -#include <linux/sysrq.h> -#include <asm/io.h> - -#include "ibm_emac_core.h" - -static void emac_desc_dump(int idx, struct ocp_enet_private *p) -{ - int i; - printk("** EMAC%d TX BDs **\n" - " tx_cnt = %d tx_slot = %d ack_slot = %d\n", - idx, p->tx_cnt, p->tx_slot, p->ack_slot); - for (i = 0; i < NUM_TX_BUFF / 2; ++i) - printk - ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n", - i, p->tx_desc[i].data_ptr, p->tx_skb[i] ? 'V' : ' ', - p->tx_desc[i].ctrl, p->tx_desc[i].data_len, - NUM_TX_BUFF / 2 + i, - p->tx_desc[NUM_TX_BUFF / 2 + i].data_ptr, - p->tx_skb[NUM_TX_BUFF / 2 + i] ? 'V' : ' ', - p->tx_desc[NUM_TX_BUFF / 2 + i].ctrl, - p->tx_desc[NUM_TX_BUFF / 2 + i].data_len); - - printk("** EMAC%d RX BDs **\n" - " rx_slot = %d rx_stopped = %d rx_skb_size = %d rx_sync_size = %d\n" - " rx_sg_skb = 0x%p\n", - idx, p->rx_slot, p->commac.rx_stopped, p->rx_skb_size, - p->rx_sync_size, p->rx_sg_skb); - for (i = 0; i < NUM_RX_BUFF / 2; ++i) - printk - ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n", - i, p->rx_desc[i].data_ptr, p->rx_skb[i] ? 'V' : ' ', - p->rx_desc[i].ctrl, p->rx_desc[i].data_len, - NUM_RX_BUFF / 2 + i, - p->rx_desc[NUM_RX_BUFF / 2 + i].data_ptr, - p->rx_skb[NUM_RX_BUFF / 2 + i] ? 'V' : ' ', - p->rx_desc[NUM_RX_BUFF / 2 + i].ctrl, - p->rx_desc[NUM_RX_BUFF / 2 + i].data_len); -} - -static void emac_mac_dump(int idx, struct ocp_enet_private *dev) -{ - struct emac_regs __iomem *p = dev->emacp; - - printk("** EMAC%d registers **\n" - "MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n" - "RMR = 0x%08x ISR = 0x%08x ISER = 0x%08x\n" - "IAR = %04x%08x VTPID = 0x%04x VTCI = 0x%04x\n" - "IAHT: 0x%04x 0x%04x 0x%04x 0x%04x " - "GAHT: 0x%04x 0x%04x 0x%04x 0x%04x\n" - "LSA = %04x%08x IPGVR = 0x%04x\n" - "STACR = 0x%08x TRTR = 0x%08x RWMR = 0x%08x\n" - "OCTX = 0x%08x OCRX = 0x%08x IPCR = 0x%08x\n", - idx, in_be32(&p->mr0), in_be32(&p->mr1), - in_be32(&p->tmr0), in_be32(&p->tmr1), - in_be32(&p->rmr), in_be32(&p->isr), in_be32(&p->iser), - in_be32(&p->iahr), in_be32(&p->ialr), in_be32(&p->vtpid), - in_be32(&p->vtci), - in_be32(&p->iaht1), in_be32(&p->iaht2), in_be32(&p->iaht3), - in_be32(&p->iaht4), - in_be32(&p->gaht1), in_be32(&p->gaht2), in_be32(&p->gaht3), - in_be32(&p->gaht4), - in_be32(&p->lsah), in_be32(&p->lsal), in_be32(&p->ipgvr), - in_be32(&p->stacr), in_be32(&p->trtr), in_be32(&p->rwmr), - in_be32(&p->octx), in_be32(&p->ocrx), in_be32(&p->ipcr) - ); - - emac_desc_dump(idx, dev); -} - -static void emac_mal_dump(struct ibm_ocp_mal *mal) -{ - struct ocp_func_mal_data *maldata = mal->def->additions; - int i; - - printk("** MAL%d Registers **\n" - "CFG = 0x%08x ESR = 0x%08x IER = 0x%08x\n" - "TX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n" - "RX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n", - mal->def->index, - get_mal_dcrn(mal, MAL_CFG), get_mal_dcrn(mal, MAL_ESR), - get_mal_dcrn(mal, MAL_IER), - get_mal_dcrn(mal, MAL_TXCASR), get_mal_dcrn(mal, MAL_TXCARR), - get_mal_dcrn(mal, MAL_TXEOBISR), get_mal_dcrn(mal, MAL_TXDEIR), - get_mal_dcrn(mal, MAL_RXCASR), get_mal_dcrn(mal, MAL_RXCARR), - get_mal_dcrn(mal, MAL_RXEOBISR), get_mal_dcrn(mal, MAL_RXDEIR) - ); - - printk("TX|"); - for (i = 0; i < maldata->num_tx_chans; ++i) { - if (i && !(i % 4)) - printk("\n "); - printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_TXCTPR(i))); - } - printk("\nRX|"); - for (i = 0; i < maldata->num_rx_chans; ++i) { - if (i && !(i % 4)) - printk("\n "); - printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_RXCTPR(i))); - } - printk("\n "); - for (i = 0; i < maldata->num_rx_chans; ++i) { - u32 r = get_mal_dcrn(mal, MAL_RCBS(i)); - if (i && !(i % 3)) - printk("\n "); - printk("RCBS%d = 0x%08x (%d) ", i, r, r * 16); - } - printk("\n"); -} - -static struct ocp_enet_private *__emacs[4]; -static struct ibm_ocp_mal *__mals[1]; - -void emac_dbg_register(int idx, struct ocp_enet_private *dev) -{ - unsigned long flags; - - if (idx >= ARRAY_SIZE(__emacs)) { - printk(KERN_WARNING - "invalid index %d when registering EMAC for debugging\n", - idx); - return; - } - - local_irq_save(flags); - __emacs[idx] = dev; - local_irq_restore(flags); -} - -void mal_dbg_register(int idx, struct ibm_ocp_mal *mal) -{ - unsigned long flags; - - if (idx >= ARRAY_SIZE(__mals)) { - printk(KERN_WARNING - "invalid index %d when registering MAL for debugging\n", - idx); - return; - } - - local_irq_save(flags); - __mals[idx] = mal; - local_irq_restore(flags); -} - -void emac_dbg_dump_all(void) -{ - unsigned int i; - unsigned long flags; - - local_irq_save(flags); - - for (i = 0; i < ARRAY_SIZE(__mals); ++i) - if (__mals[i]) - emac_mal_dump(__mals[i]); - - for (i = 0; i < ARRAY_SIZE(__emacs); ++i) - if (__emacs[i]) - emac_mac_dump(i, __emacs[i]); - - local_irq_restore(flags); -} - -#if defined(CONFIG_MAGIC_SYSRQ) -static void emac_sysrq_handler(int key, struct tty_struct *tty) -{ - emac_dbg_dump_all(); -} - -static struct sysrq_key_op emac_sysrq_op = { - .handler = emac_sysrq_handler, - .help_msg = "emaC", - .action_msg = "Show EMAC(s) status", -}; - -int __init emac_init_debug(void) -{ - return register_sysrq_key('c', &emac_sysrq_op); -} - -void __exit emac_fini_debug(void) -{ - unregister_sysrq_key('c', &emac_sysrq_op); -} - -#else -int __init emac_init_debug(void) -{ - return 0; -} -void __exit emac_fini_debug(void) -{ -} -#endif /* CONFIG_MAGIC_SYSRQ */ diff --git a/drivers/net/ibm_emac/ibm_emac_debug.h b/drivers/net/ibm_emac/ibm_emac_debug.h deleted file mode 100644 index 6c7dccc84bf5..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_debug.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_debug.h - * - * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines. - * - * Copyright (c) 2004, 2005 Zultys Technologies - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#ifndef __IBM_EMAC_DEBUG_H_ -#define __IBM_EMAC_DEBUG_H_ - -#include <linux/init.h> -#include "ibm_emac_core.h" -#include "ibm_emac_mal.h" - -#if defined(CONFIG_IBM_EMAC_DEBUG) -void emac_dbg_register(int idx, struct ocp_enet_private *dev); -void mal_dbg_register(int idx, struct ibm_ocp_mal *mal); -int emac_init_debug(void) __init; -void emac_fini_debug(void) __exit; -void emac_dbg_dump_all(void); -# define DBG_LEVEL 1 -#else -# define emac_dbg_register(x,y) ((void)0) -# define mal_dbg_register(x,y) ((void)0) -# define emac_init_debug() ((void)0) -# define emac_fini_debug() ((void)0) -# define emac_dbg_dump_all() ((void)0) -# define DBG_LEVEL 0 -#endif - -#if DBG_LEVEL > 0 -# define DBG(f,x...) printk("emac" f, ##x) -# define MAL_DBG(f,x...) printk("mal" f, ##x) -# define ZMII_DBG(f,x...) printk("zmii" f, ##x) -# define RGMII_DBG(f,x...) printk("rgmii" f, ##x) -# define NL "\n" -#else -# define DBG(f,x...) ((void)0) -# define MAL_DBG(f,x...) ((void)0) -# define ZMII_DBG(f,x...) ((void)0) -# define RGMII_DBG(f,x...) ((void)0) -#endif -#if DBG_LEVEL > 1 -# define DBG2(f,x...) DBG(f, ##x) -# define MAL_DBG2(f,x...) MAL_DBG(f, ##x) -# define ZMII_DBG2(f,x...) ZMII_DBG(f, ##x) -# define RGMII_DBG2(f,x...) RGMII_DBG(f, ##x) -#else -# define DBG2(f,x...) ((void)0) -# define MAL_DBG2(f,x...) ((void)0) -# define ZMII_DBG2(f,x...) ((void)0) -# define RGMII_DBG2(f,x...) ((void)0) -#endif - -#endif /* __IBM_EMAC_DEBUG_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_mal.c b/drivers/net/ibm_emac/ibm_emac_mal.c deleted file mode 100644 index dcd8826fc749..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_mal.c +++ /dev/null @@ -1,570 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_mal.c - * - * Memory Access Layer (MAL) support - * - * Copyright (c) 2004, 2005 Zultys Technologies. - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * - * Based on original work by - * Benjamin Herrenschmidt <benh@kernel.crashing.org>, - * David Gibson <hermes@gibson.dropbear.id.au>, - * - * Armin Kuster <akuster@mvista.com> - * Copyright 2002 MontaVista Softare Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/netdevice.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/dma-mapping.h> - -#include <asm/ocp.h> - -#include "ibm_emac_core.h" -#include "ibm_emac_mal.h" -#include "ibm_emac_debug.h" - -int __init mal_register_commac(struct ibm_ocp_mal *mal, - struct mal_commac *commac) -{ - unsigned long flags; - local_irq_save(flags); - - MAL_DBG("%d: reg(%08x, %08x)" NL, mal->def->index, - commac->tx_chan_mask, commac->rx_chan_mask); - - /* Don't let multiple commacs claim the same channel(s) */ - if ((mal->tx_chan_mask & commac->tx_chan_mask) || - (mal->rx_chan_mask & commac->rx_chan_mask)) { - local_irq_restore(flags); - printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n", - mal->def->index); - return -EBUSY; - } - - mal->tx_chan_mask |= commac->tx_chan_mask; - mal->rx_chan_mask |= commac->rx_chan_mask; - list_add(&commac->list, &mal->list); - - local_irq_restore(flags); - return 0; -} - -void mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac) -{ - unsigned long flags; - local_irq_save(flags); - - MAL_DBG("%d: unreg(%08x, %08x)" NL, mal->def->index, - commac->tx_chan_mask, commac->rx_chan_mask); - - mal->tx_chan_mask &= ~commac->tx_chan_mask; - mal->rx_chan_mask &= ~commac->rx_chan_mask; - list_del_init(&commac->list); - - local_irq_restore(flags); -} - -int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size) -{ - struct ocp_func_mal_data *maldata = mal->def->additions; - BUG_ON(channel < 0 || channel >= maldata->num_rx_chans || - size > MAL_MAX_RX_SIZE); - - MAL_DBG("%d: set_rbcs(%d, %lu)" NL, mal->def->index, channel, size); - - if (size & 0xf) { - printk(KERN_WARNING - "mal%d: incorrect RX size %lu for the channel %d\n", - mal->def->index, size, channel); - return -EINVAL; - } - - set_mal_dcrn(mal, MAL_RCBS(channel), size >> 4); - return 0; -} - -int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel) -{ - struct ocp_func_mal_data *maldata = mal->def->additions; - BUG_ON(channel < 0 || channel >= maldata->num_tx_chans); - return channel * NUM_TX_BUFF; -} - -int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel) -{ - struct ocp_func_mal_data *maldata = mal->def->additions; - BUG_ON(channel < 0 || channel >= maldata->num_rx_chans); - return maldata->num_tx_chans * NUM_TX_BUFF + channel * NUM_RX_BUFF; -} - -void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel) -{ - local_bh_disable(); - MAL_DBG("%d: enable_tx(%d)" NL, mal->def->index, channel); - set_mal_dcrn(mal, MAL_TXCASR, - get_mal_dcrn(mal, MAL_TXCASR) | MAL_CHAN_MASK(channel)); - local_bh_enable(); -} - -void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel) -{ - set_mal_dcrn(mal, MAL_TXCARR, MAL_CHAN_MASK(channel)); - MAL_DBG("%d: disable_tx(%d)" NL, mal->def->index, channel); -} - -void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel) -{ - local_bh_disable(); - MAL_DBG("%d: enable_rx(%d)" NL, mal->def->index, channel); - set_mal_dcrn(mal, MAL_RXCASR, - get_mal_dcrn(mal, MAL_RXCASR) | MAL_CHAN_MASK(channel)); - local_bh_enable(); -} - -void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel) -{ - set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel)); - MAL_DBG("%d: disable_rx(%d)" NL, mal->def->index, channel); -} - -void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac) -{ - local_bh_disable(); - MAL_DBG("%d: poll_add(%p)" NL, mal->def->index, commac); - list_add_tail(&commac->poll_list, &mal->poll_list); - local_bh_enable(); -} - -void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac) -{ - local_bh_disable(); - MAL_DBG("%d: poll_del(%p)" NL, mal->def->index, commac); - list_del(&commac->poll_list); - local_bh_enable(); -} - -/* synchronized by mal_poll() */ -static inline void mal_enable_eob_irq(struct ibm_ocp_mal *mal) -{ - MAL_DBG2("%d: enable_irq" NL, mal->def->index); - set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) | MAL_CFG_EOPIE); -} - -/* synchronized by __LINK_STATE_RX_SCHED bit in ndev->state */ -static inline void mal_disable_eob_irq(struct ibm_ocp_mal *mal) -{ - set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) & ~MAL_CFG_EOPIE); - MAL_DBG2("%d: disable_irq" NL, mal->def->index); -} - -static irqreturn_t mal_serr(int irq, void *dev_instance) -{ - struct ibm_ocp_mal *mal = dev_instance; - u32 esr = get_mal_dcrn(mal, MAL_ESR); - - /* Clear the error status register */ - set_mal_dcrn(mal, MAL_ESR, esr); - - MAL_DBG("%d: SERR %08x" NL, mal->def->index, esr); - - if (esr & MAL_ESR_EVB) { - if (esr & MAL_ESR_DE) { - /* We ignore Descriptor error, - * TXDE or RXDE interrupt will be generated anyway. - */ - return IRQ_HANDLED; - } - - if (esr & MAL_ESR_PEIN) { - /* PLB error, it's probably buggy hardware or - * incorrect physical address in BD (i.e. bug) - */ - if (net_ratelimit()) - printk(KERN_ERR - "mal%d: system error, PLB (ESR = 0x%08x)\n", - mal->def->index, esr); - return IRQ_HANDLED; - } - - /* OPB error, it's probably buggy hardware or incorrect EBC setup */ - if (net_ratelimit()) - printk(KERN_ERR - "mal%d: system error, OPB (ESR = 0x%08x)\n", - mal->def->index, esr); - } - return IRQ_HANDLED; -} - -static inline void mal_schedule_poll(struct ibm_ocp_mal *mal) -{ - if (likely(napi_schedule_prep(&mal->napi))) { - MAL_DBG2("%d: schedule_poll" NL, mal->def->index); - mal_disable_eob_irq(mal); - __napi_schedule(&mal->napi); - } else - MAL_DBG2("%d: already in poll" NL, mal->def->index); -} - -static irqreturn_t mal_txeob(int irq, void *dev_instance) -{ - struct ibm_ocp_mal *mal = dev_instance; - u32 r = get_mal_dcrn(mal, MAL_TXEOBISR); - MAL_DBG2("%d: txeob %08x" NL, mal->def->index, r); - mal_schedule_poll(mal); - set_mal_dcrn(mal, MAL_TXEOBISR, r); - return IRQ_HANDLED; -} - -static irqreturn_t mal_rxeob(int irq, void *dev_instance) -{ - struct ibm_ocp_mal *mal = dev_instance; - u32 r = get_mal_dcrn(mal, MAL_RXEOBISR); - MAL_DBG2("%d: rxeob %08x" NL, mal->def->index, r); - mal_schedule_poll(mal); - set_mal_dcrn(mal, MAL_RXEOBISR, r); - return IRQ_HANDLED; -} - -static irqreturn_t mal_txde(int irq, void *dev_instance) -{ - struct ibm_ocp_mal *mal = dev_instance; - u32 deir = get_mal_dcrn(mal, MAL_TXDEIR); - set_mal_dcrn(mal, MAL_TXDEIR, deir); - - MAL_DBG("%d: txde %08x" NL, mal->def->index, deir); - - if (net_ratelimit()) - printk(KERN_ERR - "mal%d: TX descriptor error (TXDEIR = 0x%08x)\n", - mal->def->index, deir); - - return IRQ_HANDLED; -} - -static irqreturn_t mal_rxde(int irq, void *dev_instance) -{ - struct ibm_ocp_mal *mal = dev_instance; - struct list_head *l; - u32 deir = get_mal_dcrn(mal, MAL_RXDEIR); - - MAL_DBG("%d: rxde %08x" NL, mal->def->index, deir); - - list_for_each(l, &mal->list) { - struct mal_commac *mc = list_entry(l, struct mal_commac, list); - if (deir & mc->rx_chan_mask) { - mc->rx_stopped = 1; - mc->ops->rxde(mc->dev); - } - } - - mal_schedule_poll(mal); - set_mal_dcrn(mal, MAL_RXDEIR, deir); - - return IRQ_HANDLED; -} - -static int mal_poll(struct napi_struct *napi, int budget) -{ - struct ibm_ocp_mal *mal = container_of(napi, struct ibm_ocp_mal, napi); - struct list_head *l; - int received = 0; - - MAL_DBG2("%d: poll(%d) %d ->" NL, mal->def->index, *budget, - rx_work_limit); - again: - /* Process TX skbs */ - list_for_each(l, &mal->poll_list) { - struct mal_commac *mc = - list_entry(l, struct mal_commac, poll_list); - mc->ops->poll_tx(mc->dev); - } - - /* Process RX skbs. - * We _might_ need something more smart here to enforce polling fairness. - */ - list_for_each(l, &mal->poll_list) { - struct mal_commac *mc = - list_entry(l, struct mal_commac, poll_list); - int n = mc->ops->poll_rx(mc->dev, budget); - if (n) { - received += n; - budget -= n; - if (budget <= 0) - goto more_work; // XXX What if this is the last one ? - } - } - - /* We need to disable IRQs to protect from RXDE IRQ here */ - local_irq_disable(); - __napi_complete(napi); - mal_enable_eob_irq(mal); - local_irq_enable(); - - /* Check for "rotting" packet(s) */ - list_for_each(l, &mal->poll_list) { - struct mal_commac *mc = - list_entry(l, struct mal_commac, poll_list); - if (unlikely(mc->ops->peek_rx(mc->dev) || mc->rx_stopped)) { - MAL_DBG2("%d: rotting packet" NL, mal->def->index); - if (napi_reschedule(napi)) - mal_disable_eob_irq(mal); - else - MAL_DBG2("%d: already in poll list" NL, - mal->def->index); - - if (budget > 0) - goto again; - else - goto more_work; - } - mc->ops->poll_tx(mc->dev); - } - - more_work: - MAL_DBG2("%d: poll() %d <- %d" NL, mal->def->index, budget, received); - return received; -} - -static void mal_reset(struct ibm_ocp_mal *mal) -{ - int n = 10; - MAL_DBG("%d: reset" NL, mal->def->index); - - set_mal_dcrn(mal, MAL_CFG, MAL_CFG_SR); - - /* Wait for reset to complete (1 system clock) */ - while ((get_mal_dcrn(mal, MAL_CFG) & MAL_CFG_SR) && n) - --n; - - if (unlikely(!n)) - printk(KERN_ERR "mal%d: reset timeout\n", mal->def->index); -} - -int mal_get_regs_len(struct ibm_ocp_mal *mal) -{ - return sizeof(struct emac_ethtool_regs_subhdr) + - sizeof(struct ibm_mal_regs); -} - -void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf) -{ - struct emac_ethtool_regs_subhdr *hdr = buf; - struct ibm_mal_regs *regs = (struct ibm_mal_regs *)(hdr + 1); - struct ocp_func_mal_data *maldata = mal->def->additions; - int i; - - hdr->version = MAL_VERSION; - hdr->index = mal->def->index; - - regs->tx_count = maldata->num_tx_chans; - regs->rx_count = maldata->num_rx_chans; - - regs->cfg = get_mal_dcrn(mal, MAL_CFG); - regs->esr = get_mal_dcrn(mal, MAL_ESR); - regs->ier = get_mal_dcrn(mal, MAL_IER); - regs->tx_casr = get_mal_dcrn(mal, MAL_TXCASR); - regs->tx_carr = get_mal_dcrn(mal, MAL_TXCARR); - regs->tx_eobisr = get_mal_dcrn(mal, MAL_TXEOBISR); - regs->tx_deir = get_mal_dcrn(mal, MAL_TXDEIR); - regs->rx_casr = get_mal_dcrn(mal, MAL_RXCASR); - regs->rx_carr = get_mal_dcrn(mal, MAL_RXCARR); - regs->rx_eobisr = get_mal_dcrn(mal, MAL_RXEOBISR); - regs->rx_deir = get_mal_dcrn(mal, MAL_RXDEIR); - - for (i = 0; i < regs->tx_count; ++i) - regs->tx_ctpr[i] = get_mal_dcrn(mal, MAL_TXCTPR(i)); - - for (i = 0; i < regs->rx_count; ++i) { - regs->rx_ctpr[i] = get_mal_dcrn(mal, MAL_RXCTPR(i)); - regs->rcbs[i] = get_mal_dcrn(mal, MAL_RCBS(i)); - } - return regs + 1; -} - -static int __init mal_probe(struct ocp_device *ocpdev) -{ - struct ibm_ocp_mal *mal; - struct ocp_func_mal_data *maldata; - int err = 0, i, bd_size; - - MAL_DBG("%d: probe" NL, ocpdev->def->index); - - maldata = ocpdev->def->additions; - if (maldata == NULL) { - printk(KERN_ERR "mal%d: missing additional data!\n", - ocpdev->def->index); - return -ENODEV; - } - - mal = kzalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL); - if (!mal) { - printk(KERN_ERR - "mal%d: out of memory allocating MAL structure!\n", - ocpdev->def->index); - return -ENOMEM; - } - - /* XXX This only works for native dcr for now */ - mal->dcrhost = dcr_map(NULL, maldata->dcr_base, 0); - - mal->def = ocpdev->def; - - INIT_LIST_HEAD(&mal->poll_list); - mal->napi.weight = CONFIG_IBM_EMAC_POLL_WEIGHT; - mal->napi.poll = mal_poll; - - INIT_LIST_HEAD(&mal->list); - - /* Load power-on reset defaults */ - mal_reset(mal); - - /* Set the MAL configuration register */ - set_mal_dcrn(mal, MAL_CFG, MAL_CFG_DEFAULT | MAL_CFG_PLBB | - MAL_CFG_OPBBL | MAL_CFG_LEA); - - mal_enable_eob_irq(mal); - - /* Allocate space for BD rings */ - BUG_ON(maldata->num_tx_chans <= 0 || maldata->num_tx_chans > 32); - BUG_ON(maldata->num_rx_chans <= 0 || maldata->num_rx_chans > 32); - bd_size = sizeof(struct mal_descriptor) * - (NUM_TX_BUFF * maldata->num_tx_chans + - NUM_RX_BUFF * maldata->num_rx_chans); - mal->bd_virt = - dma_alloc_coherent(&ocpdev->dev, bd_size, &mal->bd_dma, GFP_KERNEL); - - if (!mal->bd_virt) { - printk(KERN_ERR - "mal%d: out of memory allocating RX/TX descriptors!\n", - mal->def->index); - err = -ENOMEM; - goto fail; - } - memset(mal->bd_virt, 0, bd_size); - - for (i = 0; i < maldata->num_tx_chans; ++i) - set_mal_dcrn(mal, MAL_TXCTPR(i), mal->bd_dma + - sizeof(struct mal_descriptor) * - mal_tx_bd_offset(mal, i)); - - for (i = 0; i < maldata->num_rx_chans; ++i) - set_mal_dcrn(mal, MAL_RXCTPR(i), mal->bd_dma + - sizeof(struct mal_descriptor) * - mal_rx_bd_offset(mal, i)); - - err = request_irq(maldata->serr_irq, mal_serr, 0, "MAL SERR", mal); - if (err) - goto fail2; - err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE", mal); - if (err) - goto fail3; - err = request_irq(maldata->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal); - if (err) - goto fail4; - err = request_irq(maldata->rxde_irq, mal_rxde, 0, "MAL RX DE", mal); - if (err) - goto fail5; - err = request_irq(maldata->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal); - if (err) - goto fail6; - - /* Enable all MAL SERR interrupt sources */ - set_mal_dcrn(mal, MAL_IER, MAL_IER_EVENTS); - - /* Advertise this instance to the rest of the world */ - ocp_set_drvdata(ocpdev, mal); - - mal_dbg_register(mal->def->index, mal); - - printk(KERN_INFO "mal%d: initialized, %d TX channels, %d RX channels\n", - mal->def->index, maldata->num_tx_chans, maldata->num_rx_chans); - return 0; - - fail6: - free_irq(maldata->rxde_irq, mal); - fail5: - free_irq(maldata->txeob_irq, mal); - fail4: - free_irq(maldata->txde_irq, mal); - fail3: - free_irq(maldata->serr_irq, mal); - fail2: - dma_free_coherent(&ocpdev->dev, bd_size, mal->bd_virt, mal->bd_dma); - fail: - kfree(mal); - return err; -} - -static void __exit mal_remove(struct ocp_device *ocpdev) -{ - struct ibm_ocp_mal *mal = ocp_get_drvdata(ocpdev); - struct ocp_func_mal_data *maldata = mal->def->additions; - - MAL_DBG("%d: remove" NL, mal->def->index); - - /* Synchronize with scheduled polling */ - napi_disable(&mal->napi); - - if (!list_empty(&mal->list)) { - /* This is *very* bad */ - printk(KERN_EMERG - "mal%d: commac list is not empty on remove!\n", - mal->def->index); - } - - ocp_set_drvdata(ocpdev, NULL); - - free_irq(maldata->serr_irq, mal); - free_irq(maldata->txde_irq, mal); - free_irq(maldata->txeob_irq, mal); - free_irq(maldata->rxde_irq, mal); - free_irq(maldata->rxeob_irq, mal); - - mal_reset(mal); - - mal_dbg_register(mal->def->index, NULL); - - dma_free_coherent(&ocpdev->dev, - sizeof(struct mal_descriptor) * - (NUM_TX_BUFF * maldata->num_tx_chans + - NUM_RX_BUFF * maldata->num_rx_chans), mal->bd_virt, - mal->bd_dma); - - kfree(mal); -} - -/* Structure for a device driver */ -static struct ocp_device_id mal_ids[] = { - { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_MAL }, - { .vendor = OCP_VENDOR_INVALID} -}; - -static struct ocp_driver mal_driver = { - .name = "mal", - .id_table = mal_ids, - - .probe = mal_probe, - .remove = mal_remove, -}; - -int __init mal_init(void) -{ - MAL_DBG(": init" NL); - return ocp_register_driver(&mal_driver); -} - -void __exit mal_exit(void) -{ - MAL_DBG(": exit" NL); - ocp_unregister_driver(&mal_driver); -} diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h deleted file mode 100644 index b8adbe6d4b01..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_mal.h +++ /dev/null @@ -1,267 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_mal.h - * - * Memory Access Layer (MAL) support - * - * Copyright (c) 2004, 2005 Zultys Technologies. - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * - * Based on original work by - * Armin Kuster <akuster@mvista.com> - * Copyright 2002 MontaVista Softare Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#ifndef __IBM_EMAC_MAL_H_ -#define __IBM_EMAC_MAL_H_ - -#include <linux/init.h> -#include <linux/list.h> -#include <linux/netdevice.h> - -#include <asm/io.h> -#include <asm/dcr.h> - -/* - * These MAL "versions" probably aren't the real versions IBM uses for these - * MAL cores, I assigned them just to make #ifdefs in this file nicer and - * reflect the fact that 40x and 44x have slightly different MALs. --ebs - */ -#if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \ - defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_NP405H) -#define MAL_VERSION 1 -#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) || \ - defined(CONFIG_440SPE) -#define MAL_VERSION 2 -#else -#error "Unknown SoC, please check chip manual and choose MAL 'version'" -#endif - -/* MALx DCR registers */ -#define MAL_CFG 0x00 -#define MAL_CFG_SR 0x80000000 -#define MAL_CFG_PLBB 0x00004000 -#define MAL_CFG_OPBBL 0x00000080 -#define MAL_CFG_EOPIE 0x00000004 -#define MAL_CFG_LEA 0x00000002 -#define MAL_CFG_SD 0x00000001 -#if MAL_VERSION == 1 -#define MAL_CFG_PLBP_MASK 0x00c00000 -#define MAL_CFG_PLBP_10 0x00800000 -#define MAL_CFG_GA 0x00200000 -#define MAL_CFG_OA 0x00100000 -#define MAL_CFG_PLBLE 0x00080000 -#define MAL_CFG_PLBT_MASK 0x00078000 -#define MAL_CFG_DEFAULT (MAL_CFG_PLBP_10 | MAL_CFG_PLBT_MASK) -#elif MAL_VERSION == 2 -#define MAL_CFG_RPP_MASK 0x00c00000 -#define MAL_CFG_RPP_10 0x00800000 -#define MAL_CFG_RMBS_MASK 0x00300000 -#define MAL_CFG_WPP_MASK 0x000c0000 -#define MAL_CFG_WPP_10 0x00080000 -#define MAL_CFG_WMBS_MASK 0x00030000 -#define MAL_CFG_PLBLE 0x00008000 -#define MAL_CFG_DEFAULT (MAL_CFG_RMBS_MASK | MAL_CFG_WMBS_MASK | \ - MAL_CFG_RPP_10 | MAL_CFG_WPP_10) -#else -#error "Unknown MAL version" -#endif - -#define MAL_ESR 0x01 -#define MAL_ESR_EVB 0x80000000 -#define MAL_ESR_CIDT 0x40000000 -#define MAL_ESR_CID_MASK 0x3e000000 -#define MAL_ESR_CID_SHIFT 25 -#define MAL_ESR_DE 0x00100000 -#define MAL_ESR_OTE 0x00040000 -#define MAL_ESR_OSE 0x00020000 -#define MAL_ESR_PEIN 0x00010000 -#define MAL_ESR_DEI 0x00000010 -#define MAL_ESR_OTEI 0x00000004 -#define MAL_ESR_OSEI 0x00000002 -#define MAL_ESR_PBEI 0x00000001 -#if MAL_VERSION == 1 -#define MAL_ESR_ONE 0x00080000 -#define MAL_ESR_ONEI 0x00000008 -#elif MAL_VERSION == 2 -#define MAL_ESR_PTE 0x00800000 -#define MAL_ESR_PRE 0x00400000 -#define MAL_ESR_PWE 0x00200000 -#define MAL_ESR_PTEI 0x00000080 -#define MAL_ESR_PREI 0x00000040 -#define MAL_ESR_PWEI 0x00000020 -#else -#error "Unknown MAL version" -#endif - -#define MAL_IER 0x02 -#define MAL_IER_DE 0x00000010 -#define MAL_IER_OTE 0x00000004 -#define MAL_IER_OE 0x00000002 -#define MAL_IER_PE 0x00000001 -#if MAL_VERSION == 1 -#define MAL_IER_NWE 0x00000008 -#define MAL_IER_SOC_EVENTS MAL_IER_NWE -#elif MAL_VERSION == 2 -#define MAL_IER_PT 0x00000080 -#define MAL_IER_PRE 0x00000040 -#define MAL_IER_PWE 0x00000020 -#define MAL_IER_SOC_EVENTS (MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE) -#else -#error "Unknown MAL version" -#endif -#define MAL_IER_EVENTS (MAL_IER_SOC_EVENTS | MAL_IER_OTE | \ - MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE) - -#define MAL_TXCASR 0x04 -#define MAL_TXCARR 0x05 -#define MAL_TXEOBISR 0x06 -#define MAL_TXDEIR 0x07 -#define MAL_RXCASR 0x10 -#define MAL_RXCARR 0x11 -#define MAL_RXEOBISR 0x12 -#define MAL_RXDEIR 0x13 -#define MAL_TXCTPR(n) ((n) + 0x20) -#define MAL_RXCTPR(n) ((n) + 0x40) -#define MAL_RCBS(n) ((n) + 0x60) - -/* In reality MAL can handle TX buffers up to 4095 bytes long, - * but this isn't a good round number :) --ebs - */ -#define MAL_MAX_TX_SIZE 4080 -#define MAL_MAX_RX_SIZE 4080 - -static inline int mal_rx_size(int len) -{ - len = (len + 0xf) & ~0xf; - return len > MAL_MAX_RX_SIZE ? MAL_MAX_RX_SIZE : len; -} - -static inline int mal_tx_chunks(int len) -{ - return (len + MAL_MAX_TX_SIZE - 1) / MAL_MAX_TX_SIZE; -} - -#define MAL_CHAN_MASK(n) (0x80000000 >> (n)) - -/* MAL Buffer Descriptor structure */ -struct mal_descriptor { - u16 ctrl; /* MAL / Commac status control bits */ - u16 data_len; /* Max length is 4K-1 (12 bits) */ - u32 data_ptr; /* pointer to actual data buffer */ -}; - -/* the following defines are for the MadMAL status and control registers. */ -/* MADMAL transmit and receive status/control bits */ -#define MAL_RX_CTRL_EMPTY 0x8000 -#define MAL_RX_CTRL_WRAP 0x4000 -#define MAL_RX_CTRL_CM 0x2000 -#define MAL_RX_CTRL_LAST 0x1000 -#define MAL_RX_CTRL_FIRST 0x0800 -#define MAL_RX_CTRL_INTR 0x0400 -#define MAL_RX_CTRL_SINGLE (MAL_RX_CTRL_LAST | MAL_RX_CTRL_FIRST) -#define MAL_IS_SINGLE_RX(ctrl) (((ctrl) & MAL_RX_CTRL_SINGLE) == MAL_RX_CTRL_SINGLE) - -#define MAL_TX_CTRL_READY 0x8000 -#define MAL_TX_CTRL_WRAP 0x4000 -#define MAL_TX_CTRL_CM 0x2000 -#define MAL_TX_CTRL_LAST 0x1000 -#define MAL_TX_CTRL_INTR 0x0400 - -struct mal_commac_ops { - void (*poll_tx) (void *dev); - int (*poll_rx) (void *dev, int budget); - int (*peek_rx) (void *dev); - void (*rxde) (void *dev); -}; - -struct mal_commac { - struct mal_commac_ops *ops; - void *dev; - struct list_head poll_list; - int rx_stopped; - - u32 tx_chan_mask; - u32 rx_chan_mask; - struct list_head list; -}; - -struct ibm_ocp_mal { - dcr_host_t dcrhost; - - struct list_head poll_list; - struct napi_struct napi; - - struct list_head list; - u32 tx_chan_mask; - u32 rx_chan_mask; - - dma_addr_t bd_dma; - struct mal_descriptor *bd_virt; - - struct ocp_def *def; -}; - -static inline u32 get_mal_dcrn(struct ibm_ocp_mal *mal, int reg) -{ - return dcr_read(mal->dcrhost, reg); -} - -static inline void set_mal_dcrn(struct ibm_ocp_mal *mal, int reg, u32 val) -{ - dcr_write(mal->dcrhost, reg, val); -} - -/* Register MAL devices */ -int mal_init(void) __init; -void mal_exit(void) __exit; - -int mal_register_commac(struct ibm_ocp_mal *mal, - struct mal_commac *commac) __init; -void mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac); -int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size); - -/* Returns BD ring offset for a particular channel - (in 'struct mal_descriptor' elements) -*/ -int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel); -int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel); - -void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel); -void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel); -void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel); -void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel); - -/* Add/remove EMAC to/from MAL polling list */ -void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac); -void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac); - -/* Ethtool MAL registers */ -struct ibm_mal_regs { - u32 tx_count; - u32 rx_count; - - u32 cfg; - u32 esr; - u32 ier; - u32 tx_casr; - u32 tx_carr; - u32 tx_eobisr; - u32 tx_deir; - u32 rx_casr; - u32 rx_carr; - u32 rx_eobisr; - u32 rx_deir; - u32 tx_ctpr[32]; - u32 rx_ctpr[32]; - u32 rcbs[32]; -}; - -int mal_get_regs_len(struct ibm_ocp_mal *mal); -void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf); - -#endif /* __IBM_EMAC_MAL_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c deleted file mode 100644 index e57862b34cae..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_phy.c +++ /dev/null @@ -1,398 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_phy.c - * - * Driver for PowerPC 4xx on-chip ethernet controller, PHY support. - * Borrowed from sungem_phy.c, though I only kept the generic MII - * driver for now. - * - * This file should be shared with other drivers or eventually - * merged as the "low level" part of miilib - * - * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org) - * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net> - * - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/netdevice.h> -#include <linux/mii.h> -#include <linux/ethtool.h> -#include <linux/delay.h> - -#include <asm/ocp.h> - -#include "ibm_emac_core.h" -#include "ibm_emac_phy.h" - -static inline int phy_read(struct mii_phy *phy, int reg) -{ - return phy->mdio_read(phy->dev, phy->address, reg); -} - -static inline void phy_write(struct mii_phy *phy, int reg, int val) -{ - phy->mdio_write(phy->dev, phy->address, reg, val); -} - -/* - * polls MII_BMCR until BMCR_RESET bit clears or operation times out. - * - * returns: - * >= 0 => success, value in BMCR returned to caller - * -EBUSY => failure, RESET bit never cleared - * otherwise => failure, lower level PHY read failed - */ -static int mii_spin_reset_complete(struct mii_phy *phy) -{ - int val; - int limit = 10000; - - while (limit--) { - val = phy_read(phy, MII_BMCR); - if (val >= 0 && !(val & BMCR_RESET)) - return val; /* success */ - udelay(10); - } - if (val & BMCR_RESET) - val = -EBUSY; - - if (net_ratelimit()) - printk(KERN_ERR "emac%d: PHY reset timeout (%d)\n", - ((struct ocp_enet_private *)phy->dev->priv)->def->index, - val); - return val; -} - -int mii_reset_phy(struct mii_phy *phy) -{ - int val; - - val = phy_read(phy, MII_BMCR); - val &= ~BMCR_ISOLATE; - val |= BMCR_RESET; - phy_write(phy, MII_BMCR, val); - - udelay(300); - - val = mii_spin_reset_complete(phy); - if (val >= 0 && (val & BMCR_ISOLATE)) - phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE); - - return val < 0; -} - -static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) -{ - int ctl, adv; - - phy->autoneg = AUTONEG_ENABLE; - phy->speed = SPEED_10; - phy->duplex = DUPLEX_HALF; - phy->pause = phy->asym_pause = 0; - phy->advertising = advertise; - - /* Setup standard advertise */ - adv = phy_read(phy, MII_ADVERTISE); - if (adv < 0) - return adv; - adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | - ADVERTISE_PAUSE_ASYM); - if (advertise & ADVERTISED_10baseT_Half) - adv |= ADVERTISE_10HALF; - if (advertise & ADVERTISED_10baseT_Full) - adv |= ADVERTISE_10FULL; - if (advertise & ADVERTISED_100baseT_Half) - adv |= ADVERTISE_100HALF; - if (advertise & ADVERTISED_100baseT_Full) - adv |= ADVERTISE_100FULL; - if (advertise & ADVERTISED_Pause) - adv |= ADVERTISE_PAUSE_CAP; - if (advertise & ADVERTISED_Asym_Pause) - adv |= ADVERTISE_PAUSE_ASYM; - phy_write(phy, MII_ADVERTISE, adv); - - if (phy->features & - (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) { - adv = phy_read(phy, MII_CTRL1000); - if (adv < 0) - return adv; - adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); - if (advertise & ADVERTISED_1000baseT_Full) - adv |= ADVERTISE_1000FULL; - if (advertise & ADVERTISED_1000baseT_Half) - adv |= ADVERTISE_1000HALF; - phy_write(phy, MII_CTRL1000, adv); - } - - /* Start/Restart aneg */ - /* on some PHYs (e.g. National DP83843) a write to MII_ADVERTISE - * causes BMCR_RESET to be set on the next read of MII_BMCR, which - * if not checked for causes the PHY to be reset below */ - ctl = mii_spin_reset_complete(phy); - if (ctl < 0) - return ctl; - - ctl |= BMCR_ANENABLE | BMCR_ANRESTART; - phy_write(phy, MII_BMCR, ctl); - - return 0; -} - -static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) -{ - int ctl; - - phy->autoneg = AUTONEG_DISABLE; - phy->speed = speed; - phy->duplex = fd; - phy->pause = phy->asym_pause = 0; - - /* First reset the PHY */ - mii_reset_phy(phy); - - ctl = phy_read(phy, MII_BMCR); - if (ctl < 0) - return ctl; - ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE | BMCR_SPEED1000); - - /* Select speed & duplex */ - switch (speed) { - case SPEED_10: - break; - case SPEED_100: - ctl |= BMCR_SPEED100; - break; - case SPEED_1000: - ctl |= BMCR_SPEED1000; - break; - default: - return -EINVAL; - } - if (fd == DUPLEX_FULL) - ctl |= BMCR_FULLDPLX; - phy_write(phy, MII_BMCR, ctl); - - return 0; -} - -static int genmii_poll_link(struct mii_phy *phy) -{ - int status; - - /* Clear latched value with dummy read */ - phy_read(phy, MII_BMSR); - status = phy_read(phy, MII_BMSR); - if (status < 0 || (status & BMSR_LSTATUS) == 0) - return 0; - if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE)) - return 0; - return 1; -} - -static int genmii_read_link(struct mii_phy *phy) -{ - if (phy->autoneg == AUTONEG_ENABLE) { - int glpa = 0; - int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE); - if (lpa < 0) - return lpa; - - if (phy->features & - (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) { - int adv = phy_read(phy, MII_CTRL1000); - glpa = phy_read(phy, MII_STAT1000); - - if (glpa < 0 || adv < 0) - return adv; - - glpa &= adv << 2; - } - - phy->speed = SPEED_10; - phy->duplex = DUPLEX_HALF; - phy->pause = phy->asym_pause = 0; - - if (glpa & (LPA_1000FULL | LPA_1000HALF)) { - phy->speed = SPEED_1000; - if (glpa & LPA_1000FULL) - phy->duplex = DUPLEX_FULL; - } else if (lpa & (LPA_100FULL | LPA_100HALF)) { - phy->speed = SPEED_100; - if (lpa & LPA_100FULL) - phy->duplex = DUPLEX_FULL; - } else if (lpa & LPA_10FULL) - phy->duplex = DUPLEX_FULL; - - if (phy->duplex == DUPLEX_FULL) { - phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; - phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; - } - } else { - int bmcr = phy_read(phy, MII_BMCR); - if (bmcr < 0) - return bmcr; - - if (bmcr & BMCR_FULLDPLX) - phy->duplex = DUPLEX_FULL; - else - phy->duplex = DUPLEX_HALF; - if (bmcr & BMCR_SPEED1000) - phy->speed = SPEED_1000; - else if (bmcr & BMCR_SPEED100) - phy->speed = SPEED_100; - else - phy->speed = SPEED_10; - - phy->pause = phy->asym_pause = 0; - } - return 0; -} - -/* Generic implementation for most 10/100/1000 PHYs */ -static struct mii_phy_ops generic_phy_ops = { - .setup_aneg = genmii_setup_aneg, - .setup_forced = genmii_setup_forced, - .poll_link = genmii_poll_link, - .read_link = genmii_read_link -}; - -static struct mii_phy_def genmii_phy_def = { - .phy_id = 0x00000000, - .phy_id_mask = 0x00000000, - .name = "Generic MII", - .ops = &generic_phy_ops -}; - -/* CIS8201 */ -#define MII_CIS8201_10BTCSR 0x16 -#define TENBTCSR_ECHO_DISABLE 0x2000 -#define MII_CIS8201_EPCR 0x17 -#define EPCR_MODE_MASK 0x3000 -#define EPCR_GMII_MODE 0x0000 -#define EPCR_RGMII_MODE 0x1000 -#define EPCR_TBI_MODE 0x2000 -#define EPCR_RTBI_MODE 0x3000 -#define MII_CIS8201_ACSR 0x1c -#define ACSR_PIN_PRIO_SELECT 0x0004 - -static int cis8201_init(struct mii_phy *phy) -{ - int epcr; - - epcr = phy_read(phy, MII_CIS8201_EPCR); - if (epcr < 0) - return epcr; - - epcr &= ~EPCR_MODE_MASK; - - switch (phy->mode) { - case PHY_MODE_TBI: - epcr |= EPCR_TBI_MODE; - break; - case PHY_MODE_RTBI: - epcr |= EPCR_RTBI_MODE; - break; - case PHY_MODE_GMII: - epcr |= EPCR_GMII_MODE; - break; - case PHY_MODE_RGMII: - default: - epcr |= EPCR_RGMII_MODE; - } - - phy_write(phy, MII_CIS8201_EPCR, epcr); - - /* MII regs override strap pins */ - phy_write(phy, MII_CIS8201_ACSR, - phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT); - - /* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */ - phy_write(phy, MII_CIS8201_10BTCSR, - phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE); - - return 0; -} - -static struct mii_phy_ops cis8201_phy_ops = { - .init = cis8201_init, - .setup_aneg = genmii_setup_aneg, - .setup_forced = genmii_setup_forced, - .poll_link = genmii_poll_link, - .read_link = genmii_read_link -}; - -static struct mii_phy_def cis8201_phy_def = { - .phy_id = 0x000fc410, - .phy_id_mask = 0x000ffff0, - .name = "CIS8201 Gigabit Ethernet", - .ops = &cis8201_phy_ops -}; - -static struct mii_phy_def *mii_phy_table[] = { - &cis8201_phy_def, - &genmii_phy_def, - NULL -}; - -int mii_phy_probe(struct mii_phy *phy, int address) -{ - struct mii_phy_def *def; - int i; - int id; - - phy->autoneg = AUTONEG_DISABLE; - phy->advertising = 0; - phy->address = address; - phy->speed = SPEED_10; - phy->duplex = DUPLEX_HALF; - phy->pause = phy->asym_pause = 0; - - /* Take PHY out of isolate mode and reset it. */ - if (mii_reset_phy(phy)) - return -ENODEV; - - /* Read ID and find matching entry */ - id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2); - if (id < 0) - return -ENODEV; - for (i = 0; (def = mii_phy_table[i]) != NULL; i++) - if ((id & def->phy_id_mask) == def->phy_id) - break; - /* Should never be NULL (we have a generic entry), but... */ - if (!def) - return -ENODEV; - - phy->def = def; - - /* Determine PHY features if needed */ - phy->features = def->features; - if (!phy->features) { - u16 bmsr = phy_read(phy, MII_BMSR); - if (bmsr & BMSR_ANEGCAPABLE) - phy->features |= SUPPORTED_Autoneg; - if (bmsr & BMSR_10HALF) - phy->features |= SUPPORTED_10baseT_Half; - if (bmsr & BMSR_10FULL) - phy->features |= SUPPORTED_10baseT_Full; - if (bmsr & BMSR_100HALF) - phy->features |= SUPPORTED_100baseT_Half; - if (bmsr & BMSR_100FULL) - phy->features |= SUPPORTED_100baseT_Full; - if (bmsr & BMSR_ESTATEN) { - u16 esr = phy_read(phy, MII_ESTATUS); - if (esr & ESTATUS_1000_TFULL) - phy->features |= SUPPORTED_1000baseT_Full; - if (esr & ESTATUS_1000_THALF) - phy->features |= SUPPORTED_1000baseT_Half; - } - phy->features |= SUPPORTED_MII; - } - - /* Setup default advertising */ - phy->advertising = phy->features; - - return 0; -} - -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ibm_emac/ibm_emac_phy.h b/drivers/net/ibm_emac/ibm_emac_phy.h deleted file mode 100644 index a70e0fea54c4..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_phy.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_phy.h - * - * Driver for PowerPC 4xx on-chip ethernet controller, PHY support - * - * Benjamin Herrenschmidt <benh@kernel.crashing.org> - * February 2003 - * - * Minor additions by Eugene Surovegin <ebs@ebshome.net>, 2004 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This file basically duplicates sungem_phy.{c,h} with different PHYs - * supported. I'm looking into merging that in a single mii layer more - * flexible than mii.c - */ - -#ifndef _IBM_OCP_PHY_H_ -#define _IBM_OCP_PHY_H_ - -struct mii_phy; - -/* Operations supported by any kind of PHY */ -struct mii_phy_ops { - int (*init) (struct mii_phy * phy); - int (*suspend) (struct mii_phy * phy, int wol_options); - int (*setup_aneg) (struct mii_phy * phy, u32 advertise); - int (*setup_forced) (struct mii_phy * phy, int speed, int fd); - int (*poll_link) (struct mii_phy * phy); - int (*read_link) (struct mii_phy * phy); -}; - -/* Structure used to statically define an mii/gii based PHY */ -struct mii_phy_def { - u32 phy_id; /* Concatenated ID1 << 16 | ID2 */ - u32 phy_id_mask; /* Significant bits */ - u32 features; /* Ethtool SUPPORTED_* defines or - 0 for autodetect */ - int magic_aneg; /* Autoneg does all speed test for us */ - const char *name; - const struct mii_phy_ops *ops; -}; - -/* An instance of a PHY, partially borrowed from mii_if_info */ -struct mii_phy { - struct mii_phy_def *def; - u32 advertising; /* Ethtool ADVERTISED_* defines */ - u32 features; /* Copied from mii_phy_def.features - or determined automaticaly */ - int address; /* PHY address */ - int mode; /* PHY mode */ - - /* 1: autoneg enabled, 0: disabled */ - int autoneg; - - /* forced speed & duplex (no autoneg) - * partner speed & duplex & pause (autoneg) - */ - int speed; - int duplex; - int pause; - int asym_pause; - - /* Provided by host chip */ - struct net_device *dev; - int (*mdio_read) (struct net_device * dev, int addr, int reg); - void (*mdio_write) (struct net_device * dev, int addr, int reg, - int val); -}; - -/* Pass in a struct mii_phy with dev, mdio_read and mdio_write - * filled, the remaining fields will be filled on return - */ -int mii_phy_probe(struct mii_phy *phy, int address); -int mii_reset_phy(struct mii_phy *phy); - -#endif /* _IBM_OCP_PHY_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.c b/drivers/net/ibm_emac/ibm_emac_rgmii.c deleted file mode 100644 index 9dbb5e5936c3..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_rgmii.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_rgmii.c - * - * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support. - * - * Copyright (c) 2004, 2005 Zultys Technologies. - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * - * Based on original work by - * Matt Porter <mporter@kernel.crashing.org> - * Copyright 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#include <linux/kernel.h> -#include <linux/ethtool.h> -#include <asm/io.h> - -#include "ibm_emac_core.h" -#include "ibm_emac_debug.h" - -/* RGMIIx_FER */ -#define RGMII_FER_MASK(idx) (0x7 << ((idx) * 4)) -#define RGMII_FER_RTBI(idx) (0x4 << ((idx) * 4)) -#define RGMII_FER_RGMII(idx) (0x5 << ((idx) * 4)) -#define RGMII_FER_TBI(idx) (0x6 << ((idx) * 4)) -#define RGMII_FER_GMII(idx) (0x7 << ((idx) * 4)) - -/* RGMIIx_SSR */ -#define RGMII_SSR_MASK(idx) (0x7 << ((idx) * 8)) -#define RGMII_SSR_100(idx) (0x2 << ((idx) * 8)) -#define RGMII_SSR_1000(idx) (0x4 << ((idx) * 8)) - -/* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */ -static inline int rgmii_valid_mode(int phy_mode) -{ - return phy_mode == PHY_MODE_GMII || - phy_mode == PHY_MODE_RGMII || - phy_mode == PHY_MODE_TBI || - phy_mode == PHY_MODE_RTBI; -} - -static inline const char *rgmii_mode_name(int mode) -{ - switch (mode) { - case PHY_MODE_RGMII: - return "RGMII"; - case PHY_MODE_TBI: - return "TBI"; - case PHY_MODE_GMII: - return "GMII"; - case PHY_MODE_RTBI: - return "RTBI"; - default: - BUG(); - } -} - -static inline u32 rgmii_mode_mask(int mode, int input) -{ - switch (mode) { - case PHY_MODE_RGMII: - return RGMII_FER_RGMII(input); - case PHY_MODE_TBI: - return RGMII_FER_TBI(input); - case PHY_MODE_GMII: - return RGMII_FER_GMII(input); - case PHY_MODE_RTBI: - return RGMII_FER_RTBI(input); - default: - BUG(); - } -} - -static int __init rgmii_init(struct ocp_device *ocpdev, int input, int mode) -{ - struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); - struct rgmii_regs *p; - - RGMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, mode); - - if (!dev) { - dev = kzalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL); - if (!dev) { - printk(KERN_ERR - "rgmii%d: couldn't allocate device structure!\n", - ocpdev->def->index); - return -ENOMEM; - } - - p = (struct rgmii_regs *)ioremap(ocpdev->def->paddr, - sizeof(struct rgmii_regs)); - if (!p) { - printk(KERN_ERR - "rgmii%d: could not ioremap device registers!\n", - ocpdev->def->index); - kfree(dev); - return -ENOMEM; - } - - dev->base = p; - ocp_set_drvdata(ocpdev, dev); - - /* Disable all inputs by default */ - out_be32(&p->fer, 0); - } else - p = dev->base; - - /* Enable this input */ - out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input)); - - printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n", - ocpdev->def->index, input, rgmii_mode_name(mode)); - - ++dev->users; - return 0; -} - -int __init rgmii_attach(void *emac) -{ - struct ocp_enet_private *dev = emac; - struct ocp_func_emac_data *emacdata = dev->def->additions; - - /* Check if we need to attach to a RGMII */ - if (emacdata->rgmii_idx >= 0 && rgmii_valid_mode(emacdata->phy_mode)) { - dev->rgmii_input = emacdata->rgmii_mux; - dev->rgmii_dev = - ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_RGMII, - emacdata->rgmii_idx); - if (!dev->rgmii_dev) { - printk(KERN_ERR "emac%d: unknown rgmii%d!\n", - dev->def->index, emacdata->rgmii_idx); - return -ENODEV; - } - if (rgmii_init - (dev->rgmii_dev, dev->rgmii_input, emacdata->phy_mode)) { - printk(KERN_ERR - "emac%d: rgmii%d initialization failed!\n", - dev->def->index, emacdata->rgmii_idx); - return -ENODEV; - } - } - return 0; -} - -void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed) -{ - struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); - u32 ssr = in_be32(&dev->base->ssr) & ~RGMII_SSR_MASK(input); - - RGMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed); - - if (speed == SPEED_1000) - ssr |= RGMII_SSR_1000(input); - else if (speed == SPEED_100) - ssr |= RGMII_SSR_100(input); - - out_be32(&dev->base->ssr, ssr); -} - -void __rgmii_fini(struct ocp_device *ocpdev, int input) -{ - struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); - BUG_ON(!dev || dev->users == 0); - - RGMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input); - - /* Disable this input */ - out_be32(&dev->base->fer, - in_be32(&dev->base->fer) & ~RGMII_FER_MASK(input)); - - if (!--dev->users) { - /* Free everything if this is the last user */ - ocp_set_drvdata(ocpdev, NULL); - iounmap((void *)dev->base); - kfree(dev); - } -} - -int __rgmii_get_regs_len(struct ocp_device *ocpdev) -{ - return sizeof(struct emac_ethtool_regs_subhdr) + - sizeof(struct rgmii_regs); -} - -void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf) -{ - struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); - struct emac_ethtool_regs_subhdr *hdr = buf; - struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1); - - hdr->version = 0; - hdr->index = ocpdev->def->index; - memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs)); - return regs + 1; -} diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.h b/drivers/net/ibm_emac/ibm_emac_rgmii.h deleted file mode 100644 index 971e45815c6c..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_rgmii.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_rgmii.h - * - * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support. - * - * Based on ocp_zmii.h/ibm_emac_zmii.h - * Armin Kuster akuster@mvista.com - * - * Copyright 2004 MontaVista Software, Inc. - * Matt Porter <mporter@kernel.crashing.org> - * - * Copyright (c) 2004, 2005 Zultys Technologies. - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef _IBM_EMAC_RGMII_H_ -#define _IBM_EMAC_RGMII_H_ - - -/* RGMII bridge */ -struct rgmii_regs { - u32 fer; /* Function enable register */ - u32 ssr; /* Speed select register */ -}; - -/* RGMII device */ -struct ibm_ocp_rgmii { - struct rgmii_regs __iomem *base; - int users; /* number of EMACs using this RGMII bridge */ -}; - -#ifdef CONFIG_IBM_EMAC_RGMII -int rgmii_attach(void *emac) __init; - -void __rgmii_fini(struct ocp_device *ocpdev, int input); -static inline void rgmii_fini(struct ocp_device *ocpdev, int input) -{ - if (ocpdev) - __rgmii_fini(ocpdev, input); -} - -void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed); - -int __rgmii_get_regs_len(struct ocp_device *ocpdev); -static inline int rgmii_get_regs_len(struct ocp_device *ocpdev) -{ - return ocpdev ? __rgmii_get_regs_len(ocpdev) : 0; -} - -void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf); -#else -# define rgmii_attach(x) 0 -# define rgmii_fini(x,y) ((void)0) -# define rgmii_set_speed(x,y,z) ((void)0) -# define rgmii_get_regs_len(x) 0 -# define rgmii_dump_regs(x,buf) (buf) -#endif /* !CONFIG_IBM_EMAC_RGMII */ - -#endif /* _IBM_EMAC_RGMII_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_tah.c b/drivers/net/ibm_emac/ibm_emac_tah.c deleted file mode 100644 index 3c2d5ba522a1..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_tah.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_tah.c - * - * Driver for PowerPC 4xx on-chip ethernet controller, TAH support. - * - * Copyright 2004 MontaVista Software, Inc. - * Matt Porter <mporter@kernel.crashing.org> - * - * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <asm/io.h> - -#include "ibm_emac_core.h" - -static int __init tah_init(struct ocp_device *ocpdev) -{ - struct tah_regs *p; - - if (ocp_get_drvdata(ocpdev)) { - printk(KERN_ERR "tah%d: already in use!\n", ocpdev->def->index); - return -EBUSY; - } - - /* Initialize TAH and enable IPv4 checksum verification, no TSO yet */ - p = (struct tah_regs *)ioremap(ocpdev->def->paddr, sizeof(*p)); - if (!p) { - printk(KERN_ERR "tah%d: could not ioremap device registers!\n", - ocpdev->def->index); - return -ENOMEM; - } - ocp_set_drvdata(ocpdev, p); - __tah_reset(ocpdev); - - return 0; -} - -int __init tah_attach(void *emac) -{ - struct ocp_enet_private *dev = emac; - struct ocp_func_emac_data *emacdata = dev->def->additions; - - /* Check if we need to attach to a TAH */ - if (emacdata->tah_idx >= 0) { - dev->tah_dev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH, - emacdata->tah_idx); - if (!dev->tah_dev) { - printk(KERN_ERR "emac%d: unknown tah%d!\n", - dev->def->index, emacdata->tah_idx); - return -ENODEV; - } - if (tah_init(dev->tah_dev)) { - printk(KERN_ERR - "emac%d: tah%d initialization failed!\n", - dev->def->index, emacdata->tah_idx); - return -ENODEV; - } - } - return 0; -} - -void __tah_fini(struct ocp_device *ocpdev) -{ - struct tah_regs *p = ocp_get_drvdata(ocpdev); - BUG_ON(!p); - ocp_set_drvdata(ocpdev, NULL); - iounmap((void *)p); -} - -void __tah_reset(struct ocp_device *ocpdev) -{ - struct tah_regs *p = ocp_get_drvdata(ocpdev); - int n; - - /* Reset TAH */ - out_be32(&p->mr, TAH_MR_SR); - n = 100; - while ((in_be32(&p->mr) & TAH_MR_SR) && n) - --n; - - if (unlikely(!n)) - printk(KERN_ERR "tah%d: reset timeout\n", ocpdev->def->index); - - /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */ - out_be32(&p->mr, - TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP | - TAH_MR_DIG); -} - -int __tah_get_regs_len(struct ocp_device *ocpdev) -{ - return sizeof(struct emac_ethtool_regs_subhdr) + - sizeof(struct tah_regs); -} - -void *tah_dump_regs(struct ocp_device *ocpdev, void *buf) -{ - struct tah_regs *dev = ocp_get_drvdata(ocpdev); - struct emac_ethtool_regs_subhdr *hdr = buf; - struct tah_regs *regs = (struct tah_regs *)(hdr + 1); - - hdr->version = 0; - hdr->index = ocpdev->def->index; - memcpy_fromio(regs, dev, sizeof(struct tah_regs)); - return regs + 1; -} diff --git a/drivers/net/ibm_emac/ibm_emac_tah.h b/drivers/net/ibm_emac/ibm_emac_tah.h deleted file mode 100644 index ccf64915e1e4..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_tah.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_tah.h - * - * Driver for PowerPC 4xx on-chip ethernet controller, TAH support. - * - * Copyright 2004 MontaVista Software, Inc. - * Matt Porter <mporter@kernel.crashing.org> - * - * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef _IBM_EMAC_TAH_H -#define _IBM_EMAC_TAH_H - -#include <linux/init.h> -#include <asm/ocp.h> - -/* TAH */ -struct tah_regs { - u32 revid; - u32 pad[3]; - u32 mr; - u32 ssr0; - u32 ssr1; - u32 ssr2; - u32 ssr3; - u32 ssr4; - u32 ssr5; - u32 tsr; -}; - -/* TAH engine */ -#define TAH_MR_CVR 0x80000000 -#define TAH_MR_SR 0x40000000 -#define TAH_MR_ST_256 0x01000000 -#define TAH_MR_ST_512 0x02000000 -#define TAH_MR_ST_768 0x03000000 -#define TAH_MR_ST_1024 0x04000000 -#define TAH_MR_ST_1280 0x05000000 -#define TAH_MR_ST_1536 0x06000000 -#define TAH_MR_TFS_16KB 0x00000000 -#define TAH_MR_TFS_2KB 0x00200000 -#define TAH_MR_TFS_4KB 0x00400000 -#define TAH_MR_TFS_6KB 0x00600000 -#define TAH_MR_TFS_8KB 0x00800000 -#define TAH_MR_TFS_10KB 0x00a00000 -#define TAH_MR_DTFP 0x00100000 -#define TAH_MR_DIG 0x00080000 - -#ifdef CONFIG_IBM_EMAC_TAH -int tah_attach(void *emac) __init; - -void __tah_fini(struct ocp_device *ocpdev); -static inline void tah_fini(struct ocp_device *ocpdev) -{ - if (ocpdev) - __tah_fini(ocpdev); -} - -void __tah_reset(struct ocp_device *ocpdev); -static inline void tah_reset(struct ocp_device *ocpdev) -{ - if (ocpdev) - __tah_reset(ocpdev); -} - -int __tah_get_regs_len(struct ocp_device *ocpdev); -static inline int tah_get_regs_len(struct ocp_device *ocpdev) -{ - return ocpdev ? __tah_get_regs_len(ocpdev) : 0; -} - -void *tah_dump_regs(struct ocp_device *ocpdev, void *buf); -#else -# define tah_attach(x) 0 -# define tah_fini(x) ((void)0) -# define tah_reset(x) ((void)0) -# define tah_get_regs_len(x) 0 -# define tah_dump_regs(x,buf) (buf) -#endif /* !CONFIG_IBM_EMAC_TAH */ - -#endif /* _IBM_EMAC_TAH_H */ diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.c b/drivers/net/ibm_emac/ibm_emac_zmii.c deleted file mode 100644 index 2c0fdb0cabff..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_zmii.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_zmii.c - * - * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. - * - * Copyright (c) 2004, 2005 Zultys Technologies. - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * - * Based on original work by - * Armin Kuster <akuster@mvista.com> - * Copyright 2001 MontaVista Softare Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#include <linux/kernel.h> -#include <linux/ethtool.h> -#include <asm/io.h> - -#include "ibm_emac_core.h" -#include "ibm_emac_debug.h" - -/* ZMIIx_FER */ -#define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4)) -#define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \ - ZMII_FER_MDI(2) | ZMII_FER_MDI(3)) - -#define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4)) -#define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4)) -#define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4)) - -/* ZMIIx_SSR */ -#define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4)) -#define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4)) -#define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4)) - -/* ZMII only supports MII, RMII and SMII - * we also support autodetection for backward compatibility - */ -static inline int zmii_valid_mode(int mode) -{ - return mode == PHY_MODE_MII || - mode == PHY_MODE_RMII || - mode == PHY_MODE_SMII || - mode == PHY_MODE_NA; -} - -static inline const char *zmii_mode_name(int mode) -{ - switch (mode) { - case PHY_MODE_MII: - return "MII"; - case PHY_MODE_RMII: - return "RMII"; - case PHY_MODE_SMII: - return "SMII"; - default: - BUG(); - } -} - -static inline u32 zmii_mode_mask(int mode, int input) -{ - switch (mode) { - case PHY_MODE_MII: - return ZMII_FER_MII(input); - case PHY_MODE_RMII: - return ZMII_FER_RMII(input); - case PHY_MODE_SMII: - return ZMII_FER_SMII(input); - default: - return 0; - } -} - -static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode) -{ - struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); - struct zmii_regs __iomem *p; - - ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode); - - if (!dev) { - dev = kzalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL); - if (!dev) { - printk(KERN_ERR - "zmii%d: couldn't allocate device structure!\n", - ocpdev->def->index); - return -ENOMEM; - } - dev->mode = PHY_MODE_NA; - - p = ioremap(ocpdev->def->paddr, sizeof(struct zmii_regs)); - if (!p) { - printk(KERN_ERR - "zmii%d: could not ioremap device registers!\n", - ocpdev->def->index); - kfree(dev); - return -ENOMEM; - } - dev->base = p; - ocp_set_drvdata(ocpdev, dev); - - /* We may need FER value for autodetection later */ - dev->fer_save = in_be32(&p->fer); - - /* Disable all inputs by default */ - out_be32(&p->fer, 0); - } else - p = dev->base; - - if (!zmii_valid_mode(*mode)) { - /* Probably an EMAC connected to RGMII, - * but it still may need ZMII for MDIO - */ - goto out; - } - - /* Autodetect ZMII mode if not specified. - * This is only for backward compatibility with the old driver. - * Please, always specify PHY mode in your board port to avoid - * any surprises. - */ - if (dev->mode == PHY_MODE_NA) { - if (*mode == PHY_MODE_NA) { - u32 r = dev->fer_save; - - ZMII_DBG("%d: autodetecting mode, FER = 0x%08x" NL, - ocpdev->def->index, r); - - if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1))) - dev->mode = PHY_MODE_MII; - else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1))) - dev->mode = PHY_MODE_RMII; - else - dev->mode = PHY_MODE_SMII; - } else - dev->mode = *mode; - - printk(KERN_NOTICE "zmii%d: bridge in %s mode\n", - ocpdev->def->index, zmii_mode_name(dev->mode)); - } else { - /* All inputs must use the same mode */ - if (*mode != PHY_MODE_NA && *mode != dev->mode) { - printk(KERN_ERR - "zmii%d: invalid mode %d specified for input %d\n", - ocpdev->def->index, *mode, input); - return -EINVAL; - } - } - - /* Report back correct PHY mode, - * it may be used during PHY initialization. - */ - *mode = dev->mode; - - /* Enable this input */ - out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input)); - out: - ++dev->users; - return 0; -} - -int __init zmii_attach(void *emac) -{ - struct ocp_enet_private *dev = emac; - struct ocp_func_emac_data *emacdata = dev->def->additions; - - if (emacdata->zmii_idx >= 0) { - dev->zmii_input = emacdata->zmii_mux; - dev->zmii_dev = - ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII, - emacdata->zmii_idx); - if (!dev->zmii_dev) { - printk(KERN_ERR "emac%d: unknown zmii%d!\n", - dev->def->index, emacdata->zmii_idx); - return -ENODEV; - } - if (zmii_init - (dev->zmii_dev, dev->zmii_input, &emacdata->phy_mode)) { - printk(KERN_ERR - "emac%d: zmii%d initialization failed!\n", - dev->def->index, emacdata->zmii_idx); - return -ENODEV; - } - } - return 0; -} - -void __zmii_enable_mdio(struct ocp_device *ocpdev, int input) -{ - struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); - u32 fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL; - - ZMII_DBG2("%d: mdio(%d)" NL, ocpdev->def->index, input); - - out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input)); -} - -void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed) -{ - struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); - u32 ssr = in_be32(&dev->base->ssr); - - ZMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed); - - if (speed == SPEED_100) - ssr |= ZMII_SSR_SP(input); - else - ssr &= ~ZMII_SSR_SP(input); - - out_be32(&dev->base->ssr, ssr); -} - -void __zmii_fini(struct ocp_device *ocpdev, int input) -{ - struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); - BUG_ON(!dev || dev->users == 0); - - ZMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input); - - /* Disable this input */ - out_be32(&dev->base->fer, - in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input)); - - if (!--dev->users) { - /* Free everything if this is the last user */ - ocp_set_drvdata(ocpdev, NULL); - iounmap(dev->base); - kfree(dev); - } -} - -int __zmii_get_regs_len(struct ocp_device *ocpdev) -{ - return sizeof(struct emac_ethtool_regs_subhdr) + - sizeof(struct zmii_regs); -} - -void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf) -{ - struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); - struct emac_ethtool_regs_subhdr *hdr = buf; - struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1); - - hdr->version = 0; - hdr->index = ocpdev->def->index; - memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs)); - return regs + 1; -} diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.h b/drivers/net/ibm_emac/ibm_emac_zmii.h deleted file mode 100644 index fad6d8bf983a..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_zmii.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * drivers/net/ibm_emac/ibm_emac_zmii.h - * - * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. - * - * Copyright (c) 2004, 2005 Zultys Technologies. - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * - * Based on original work by - * Armin Kuster <akuster@mvista.com> - * Copyright 2001 MontaVista Softare Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#ifndef _IBM_EMAC_ZMII_H_ -#define _IBM_EMAC_ZMII_H_ - -#include <linux/init.h> -#include <asm/ocp.h> - -/* ZMII bridge registers */ -struct zmii_regs { - u32 fer; /* Function enable reg */ - u32 ssr; /* Speed select reg */ - u32 smiirs; /* SMII status reg */ -}; - -/* ZMII device */ -struct ibm_ocp_zmii { - struct zmii_regs __iomem *base; - int mode; /* subset of PHY_MODE_XXXX */ - int users; /* number of EMACs using this ZMII bridge */ - u32 fer_save; /* FER value left by firmware */ -}; - -#ifdef CONFIG_IBM_EMAC_ZMII -int zmii_attach(void *emac) __init; - -void __zmii_fini(struct ocp_device *ocpdev, int input); -static inline void zmii_fini(struct ocp_device *ocpdev, int input) -{ - if (ocpdev) - __zmii_fini(ocpdev, input); -} - -void __zmii_enable_mdio(struct ocp_device *ocpdev, int input); -static inline void zmii_enable_mdio(struct ocp_device *ocpdev, int input) -{ - if (ocpdev) - __zmii_enable_mdio(ocpdev, input); -} - -void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed); -static inline void zmii_set_speed(struct ocp_device *ocpdev, int input, - int speed) -{ - if (ocpdev) - __zmii_set_speed(ocpdev, input, speed); -} - -int __zmii_get_regs_len(struct ocp_device *ocpdev); -static inline int zmii_get_regs_len(struct ocp_device *ocpdev) -{ - return ocpdev ? __zmii_get_regs_len(ocpdev) : 0; -} - -void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf); - -#else -# define zmii_attach(x) 0 -# define zmii_fini(x,y) ((void)0) -# define zmii_enable_mdio(x,y) ((void)0) -# define zmii_set_speed(x,y,z) ((void)0) -# define zmii_get_regs_len(x) 0 -# define zmii_dump_regs(x,buf) (buf) -#endif /* !CONFIG_IBM_EMAC_ZMII */ - -#endif /* _IBM_EMAC_ZMII_H_ */ |