summaryrefslogtreecommitdiff
path: root/drivers/net/ieee802154
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ieee802154')
-rw-r--r--drivers/net/ieee802154/at86rf230.c151
-rw-r--r--drivers/net/ieee802154/fakehard.c21
-rw-r--r--drivers/net/ieee802154/mrf24j40.c41
3 files changed, 137 insertions, 76 deletions
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index fc1687ea4a42..6f10b4964726 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -51,7 +51,7 @@ struct at86rf230_local {
struct ieee802154_dev *dev;
spinlock_t lock;
- bool irq_disabled;
+ bool irq_busy;
bool is_tx;
};
@@ -219,6 +219,9 @@ struct at86rf230_local {
#define IRQ_PLL_UNL (1 << 1)
#define IRQ_PLL_LOCK (1 << 0)
+#define IRQ_ACTIVE_HIGH 0
+#define IRQ_ACTIVE_LOW 1
+
#define STATE_P_ON 0x00 /* BUSY */
#define STATE_BUSY_RX 0x01
#define STATE_BUSY_TX 0x02
@@ -233,8 +236,8 @@ struct at86rf230_local {
#define STATE_SLEEP 0x0F
#define STATE_BUSY_RX_AACK 0x11
#define STATE_BUSY_TX_ARET 0x12
-#define STATE_BUSY_RX_AACK_ON 0x16
-#define STATE_BUSY_TX_ARET_ON 0x19
+#define STATE_RX_AACK_ON 0x16
+#define STATE_TX_ARET_ON 0x19
#define STATE_RX_ON_NOCLK 0x1C
#define STATE_RX_AACK_ON_NOCLK 0x1D
#define STATE_BUSY_RX_AACK_NOCLK 0x1E
@@ -544,7 +547,7 @@ at86rf230_xmit(struct ieee802154_dev *dev, struct sk_buff *skb)
unsigned long flags;
spin_lock(&lp->lock);
- if (lp->irq_disabled) {
+ if (lp->irq_busy) {
spin_unlock(&lp->lock);
return -EBUSY;
}
@@ -619,6 +622,52 @@ err:
return -EINVAL;
}
+static int
+at86rf230_set_hw_addr_filt(struct ieee802154_dev *dev,
+ struct ieee802154_hw_addr_filt *filt,
+ unsigned long changed)
+{
+ struct at86rf230_local *lp = dev->priv;
+
+ if (changed & IEEE802515_AFILT_SADDR_CHANGED) {
+ dev_vdbg(&lp->spi->dev,
+ "at86rf230_set_hw_addr_filt called for saddr\n");
+ __at86rf230_write(lp, RG_SHORT_ADDR_0, filt->short_addr);
+ __at86rf230_write(lp, RG_SHORT_ADDR_1, filt->short_addr >> 8);
+ }
+
+ if (changed & IEEE802515_AFILT_PANID_CHANGED) {
+ dev_vdbg(&lp->spi->dev,
+ "at86rf230_set_hw_addr_filt called for pan id\n");
+ __at86rf230_write(lp, RG_PAN_ID_0, filt->pan_id);
+ __at86rf230_write(lp, RG_PAN_ID_1, filt->pan_id >> 8);
+ }
+
+ if (changed & IEEE802515_AFILT_IEEEADDR_CHANGED) {
+ dev_vdbg(&lp->spi->dev,
+ "at86rf230_set_hw_addr_filt called for IEEE addr\n");
+ at86rf230_write_subreg(lp, SR_IEEE_ADDR_0, filt->ieee_addr[7]);
+ at86rf230_write_subreg(lp, SR_IEEE_ADDR_1, filt->ieee_addr[6]);
+ at86rf230_write_subreg(lp, SR_IEEE_ADDR_2, filt->ieee_addr[5]);
+ at86rf230_write_subreg(lp, SR_IEEE_ADDR_3, filt->ieee_addr[4]);
+ at86rf230_write_subreg(lp, SR_IEEE_ADDR_4, filt->ieee_addr[3]);
+ at86rf230_write_subreg(lp, SR_IEEE_ADDR_5, filt->ieee_addr[2]);
+ at86rf230_write_subreg(lp, SR_IEEE_ADDR_6, filt->ieee_addr[1]);
+ at86rf230_write_subreg(lp, SR_IEEE_ADDR_7, filt->ieee_addr[0]);
+ }
+
+ if (changed & IEEE802515_AFILT_PANC_CHANGED) {
+ dev_vdbg(&lp->spi->dev,
+ "at86rf230_set_hw_addr_filt called for panc change\n");
+ if (filt->pan_coord)
+ at86rf230_write_subreg(lp, SR_AACK_I_AM_COORD, 1);
+ else
+ at86rf230_write_subreg(lp, SR_AACK_I_AM_COORD, 0);
+ }
+
+ return 0;
+}
+
static struct ieee802154_ops at86rf230_ops = {
.owner = THIS_MODULE,
.xmit = at86rf230_xmit,
@@ -626,6 +675,7 @@ static struct ieee802154_ops at86rf230_ops = {
.set_channel = at86rf230_channel,
.start = at86rf230_start,
.stop = at86rf230_stop,
+ .set_hw_addr_filt = at86rf230_set_hw_addr_filt,
};
static void at86rf230_irqwork(struct work_struct *work)
@@ -658,8 +708,16 @@ static void at86rf230_irqwork(struct work_struct *work)
}
spin_lock_irqsave(&lp->lock, flags);
- lp->irq_disabled = 0;
+ lp->irq_busy = 0;
spin_unlock_irqrestore(&lp->lock, flags);
+}
+
+static void at86rf230_irqwork_level(struct work_struct *work)
+{
+ struct at86rf230_local *lp =
+ container_of(work, struct at86rf230_local, irqwork);
+
+ at86rf230_irqwork(work);
enable_irq(lp->spi->irq);
}
@@ -668,10 +726,8 @@ static irqreturn_t at86rf230_isr(int irq, void *data)
{
struct at86rf230_local *lp = data;
- disable_irq_nosync(irq);
-
spin_lock(&lp->lock);
- lp->irq_disabled = 1;
+ lp->irq_busy = 1;
spin_unlock(&lp->lock);
schedule_work(&lp->irqwork);
@@ -679,11 +735,23 @@ static irqreturn_t at86rf230_isr(int irq, void *data)
return IRQ_HANDLED;
}
+static irqreturn_t at86rf230_isr_level(int irq, void *data)
+{
+ disable_irq_nosync(irq);
+
+ return at86rf230_isr(irq, data);
+}
+
+static int at86rf230_irq_polarity(struct at86rf230_local *lp, int pol)
+{
+ return at86rf230_write_subreg(lp, SR_IRQ_POLARITY, pol);
+}
static int at86rf230_hw_init(struct at86rf230_local *lp)
{
+ struct at86rf230_platform_data *pdata = lp->spi->dev.platform_data;
+ int rc, irq_pol;
u8 status;
- int rc;
rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
if (rc)
@@ -701,12 +769,17 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
dev_info(&lp->spi->dev, "Status: %02x\n", status);
}
- rc = at86rf230_write_subreg(lp, SR_IRQ_MASK, 0xff); /* IRQ_TRX_UR |
- * IRQ_CCA_ED |
- * IRQ_TRX_END |
- * IRQ_PLL_UNL |
- * IRQ_PLL_LOCK
- */
+ /* configure irq polarity, defaults to high active */
+ if (pdata->irq_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
+ irq_pol = IRQ_ACTIVE_LOW;
+ else
+ irq_pol = IRQ_ACTIVE_HIGH;
+
+ rc = at86rf230_irq_polarity(lp, irq_pol);
+ if (rc)
+ return rc;
+
+ rc = at86rf230_write_subreg(lp, SR_IRQ_MASK, IRQ_TRX_END);
if (rc)
return rc;
@@ -751,37 +824,38 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
return 0;
}
-static int at86rf230_fill_data(struct spi_device *spi)
+static void at86rf230_fill_data(struct spi_device *spi)
{
struct at86rf230_local *lp = spi_get_drvdata(spi);
struct at86rf230_platform_data *pdata = spi->dev.platform_data;
- if (!pdata) {
- dev_err(&spi->dev, "no platform_data\n");
- return -EINVAL;
- }
-
lp->rstn = pdata->rstn;
lp->slp_tr = pdata->slp_tr;
lp->dig2 = pdata->dig2;
-
- return 0;
}
static int at86rf230_probe(struct spi_device *spi)
{
+ struct at86rf230_platform_data *pdata;
struct ieee802154_dev *dev;
struct at86rf230_local *lp;
- u8 man_id_0, man_id_1;
- int rc;
+ u8 man_id_0, man_id_1, status;
+ irq_handler_t irq_handler;
+ work_func_t irq_worker;
+ int rc, supported = 0;
const char *chip;
- int supported = 0;
if (!spi->irq) {
dev_err(&spi->dev, "no IRQ specified\n");
return -EINVAL;
}
+ pdata = spi->dev.platform_data;
+ if (!pdata) {
+ dev_err(&spi->dev, "no platform_data\n");
+ return -EINVAL;
+ }
+
dev = ieee802154_alloc_device(sizeof(*lp), &at86rf230_ops);
if (!dev)
return -ENOMEM;
@@ -791,23 +865,28 @@ static int at86rf230_probe(struct spi_device *spi)
lp->spi = spi;
- dev->priv = lp;
dev->parent = &spi->dev;
dev->extra_tx_headroom = 0;
/* We do support only 2.4 Ghz */
dev->phy->channels_supported[0] = 0x7FFF800;
dev->flags = IEEE802154_HW_OMIT_CKSUM;
+ if (pdata->irq_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
+ irq_worker = at86rf230_irqwork;
+ irq_handler = at86rf230_isr;
+ } else {
+ irq_worker = at86rf230_irqwork_level;
+ irq_handler = at86rf230_isr_level;
+ }
+
mutex_init(&lp->bmux);
- INIT_WORK(&lp->irqwork, at86rf230_irqwork);
+ INIT_WORK(&lp->irqwork, irq_worker);
spin_lock_init(&lp->lock);
init_completion(&lp->tx_complete);
spi_set_drvdata(spi, lp);
- rc = at86rf230_fill_data(spi);
- if (rc)
- goto err_fill;
+ at86rf230_fill_data(spi);
rc = gpio_request(lp->rstn, "rstn");
if (rc)
@@ -882,18 +961,23 @@ static int at86rf230_probe(struct spi_device *spi)
if (rc)
goto err_gpio_dir;
- rc = request_irq(spi->irq, at86rf230_isr, IRQF_SHARED,
+ rc = request_irq(spi->irq, irq_handler,
+ IRQF_SHARED | pdata->irq_type,
dev_name(&spi->dev), lp);
if (rc)
goto err_gpio_dir;
+ /* Read irq status register to reset irq line */
+ rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &status);
+ if (rc)
+ goto err_irq;
+
rc = ieee802154_register_device(lp->dev);
if (rc)
goto err_irq;
return rc;
- ieee802154_unregister_device(lp->dev);
err_irq:
free_irq(spi->irq, lp);
flush_work(&lp->irqwork);
@@ -903,7 +987,6 @@ err_gpio_dir:
err_slp_tr:
gpio_free(lp->rstn);
err_rstn:
-err_fill:
spi_set_drvdata(spi, NULL);
mutex_destroy(&lp->bmux);
ieee802154_free_device(lp->dev);
diff --git a/drivers/net/ieee802154/fakehard.c b/drivers/net/ieee802154/fakehard.c
index 8f1c25676d44..bf0d55e2dd63 100644
--- a/drivers/net/ieee802154/fakehard.c
+++ b/drivers/net/ieee802154/fakehard.c
@@ -106,26 +106,6 @@ static u8 fake_get_dsn(const struct net_device *dev)
}
/**
- * fake_get_bsn - Retrieve the BSN of the device.
- * @dev: The network device to retrieve the BSN for.
- *
- * Returns the IEEE 802.15.4 BSN for the network device.
- * The BSN is the sequence number which will be added to each
- * beacon frame sent by the MAC.
- *
- * BSN means 'Beacon Sequence Number'.
- *
- * Note: This is in section 7.2.1.2 of the IEEE 802.15.4-2006
- * document.
- */
-static u8 fake_get_bsn(const struct net_device *dev)
-{
- BUG_ON(dev->type != ARPHRD_IEEE802154);
-
- return 0x00; /* BSN are implemented in HW, so return just 0 */
-}
-
-/**
* fake_assoc_req - Make an association request to the HW.
* @dev: The network device which we are associating to a network.
* @addr: The coordinator with which we wish to associate.
@@ -264,7 +244,6 @@ static struct ieee802154_mlme_ops fake_mlme = {
.get_pan_id = fake_get_pan_id,
.get_short_addr = fake_get_short_addr,
.get_dsn = fake_get_dsn,
- .get_bsn = fake_get_bsn,
};
static int ieee802154_fake_open(struct net_device *dev)
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index 3f2c7aaf28c4..ede3ce4912f9 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -22,8 +22,10 @@
#include <linux/spi/spi.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
#include <net/wpan-phy.h>
#include <net/mac802154.h>
+#include <net/ieee802154.h>
/* MRF24J40 Short Address Registers */
#define REG_RXMCR 0x00 /* Receive MAC control */
@@ -91,9 +93,8 @@ struct mrf24j40 {
#define MRF24J40_READLONG(reg) (1 << 15 | (reg) << 5)
#define MRF24J40_WRITELONG(reg) (1 << 15 | (reg) << 5 | 1 << 4)
-/* Maximum speed to run the device at. TODO: Get the real max value from
- * someone at Microchip since it isn't in the datasheet. */
-#define MAX_SPI_SPEED_HZ 1000000
+/* The datasheet indicates the theoretical maximum for SCK to be 10MHz */
+#define MAX_SPI_SPEED_HZ 10000000
#define printdev(X) (&X->spi->dev)
@@ -349,7 +350,9 @@ static int mrf24j40_tx(struct ieee802154_dev *dev, struct sk_buff *skb)
if (ret)
goto err;
val |= 0x1;
- val &= ~0x4;
+ /* Set TXNACKREQ if the ACK bit is set in the packet. */
+ if (skb->data[0] & IEEE802154_FC_ACK_REQ)
+ val |= 0x4;
write_short_reg(devrec, REG_TXNCON, val);
INIT_COMPLETION(devrec->tx_complete);
@@ -361,6 +364,7 @@ static int mrf24j40_tx(struct ieee802154_dev *dev, struct sk_buff *skb)
if (ret == -ERESTARTSYS)
goto err;
if (ret == 0) {
+ dev_warn(printdev(devrec), "Timeout waiting for TX interrupt\n");
ret = -ETIMEDOUT;
goto err;
}
@@ -370,7 +374,7 @@ static int mrf24j40_tx(struct ieee802154_dev *dev, struct sk_buff *skb)
if (ret)
goto err;
if (val & 0x1) {
- dev_err(printdev(devrec), "Error Sending. Retry count exceeded\n");
+ dev_dbg(printdev(devrec), "Error Sending. Retry count exceeded\n");
ret = -ECOMM; /* TODO: Better error code ? */
} else
dev_dbg(printdev(devrec), "Packet Sent\n");
@@ -477,7 +481,7 @@ static int mrf24j40_filter(struct ieee802154_dev *dev,
int i;
for (i = 0; i < 8; i++)
write_short_reg(devrec, REG_EADR0+i,
- filt->ieee_addr[i]);
+ filt->ieee_addr[7-i]);
#ifdef DEBUG
printk(KERN_DEBUG "Set long addr to: ");
@@ -623,6 +627,7 @@ static int mrf24j40_probe(struct spi_device *spi)
int ret = -ENOMEM;
u8 val;
struct mrf24j40 *devrec;
+ struct pinctrl *pinctrl;
printk(KERN_INFO "mrf24j40: probe(). IRQ: %d\n", spi->irq);
@@ -633,6 +638,11 @@ static int mrf24j40_probe(struct spi_device *spi)
if (!devrec->buf)
goto err_buf;
+ pinctrl = devm_pinctrl_get_select_default(&spi->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&spi->dev,
+ "pinctrl pins are not configured from the driver");
+
spi->mode = SPI_MODE_0; /* TODO: Is this appropriate for right here? */
if (spi->max_speed_hz > MAX_SPI_SPEED_HZ)
spi->max_speed_hz = MAX_SPI_SPEED_HZ;
@@ -641,7 +651,7 @@ static int mrf24j40_probe(struct spi_device *spi)
init_completion(&devrec->tx_complete);
INIT_WORK(&devrec->irqwork, mrf24j40_isrwork);
devrec->spi = spi;
- dev_set_drvdata(&spi->dev, devrec);
+ spi_set_drvdata(spi, devrec);
/* Register with the 802154 subsystem */
@@ -713,7 +723,7 @@ err_devrec:
static int mrf24j40_remove(struct spi_device *spi)
{
- struct mrf24j40 *devrec = dev_get_drvdata(&spi->dev);
+ struct mrf24j40 *devrec = spi_get_drvdata(spi);
dev_dbg(printdev(devrec), "remove\n");
@@ -725,7 +735,7 @@ static int mrf24j40_remove(struct spi_device *spi)
* complete? */
/* Clean up the SPI stuff. */
- dev_set_drvdata(&spi->dev, NULL);
+ spi_set_drvdata(spi, NULL);
kfree(devrec->buf);
kfree(devrec);
return 0;
@@ -749,18 +759,7 @@ static struct spi_driver mrf24j40_driver = {
.remove = mrf24j40_remove,
};
-static int __init mrf24j40_init(void)
-{
- return spi_register_driver(&mrf24j40_driver);
-}
-
-static void __exit mrf24j40_exit(void)
-{
- spi_unregister_driver(&mrf24j40_driver);
-}
-
-module_init(mrf24j40_init);
-module_exit(mrf24j40_exit);
+module_spi_driver(mrf24j40_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Alan Ott");
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-14 16:34:54 +0000