diff options
Diffstat (limited to 'drivers/net/irda')
| -rw-r--r-- | drivers/net/irda/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/net/irda/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/irda/kingsun-sir.c | 657 |
3 files changed, 672 insertions, 0 deletions
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 7c8ccc09b601..829da9a1d113 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -141,6 +141,20 @@ config ACT200L_DONGLE To activate support for ACTiSYS IR-200L dongle you will have to start irattach like this: "irattach -d act200l". +config KINGSUN_DONGLE + tristate "KingSun/DonShine DS-620 IrDA-USB dongle" + depends on IRDA && USB && EXPERIMENTAL + help + Say Y or M here if you want to build support for the KingSun/DonShine + DS-620 IrDA-USB bridge device driver. + + This USB bridge does not conform to the IrDA-USB device class + specification, and therefore needs its own specific driver. This + dongle supports SIR speed only (9600 bps). + + To compile it as a module, choose M here: the module will be called + kingsun-sir. + comment "Old SIR device drivers" config IRPORT_SIR diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile index 5be09f1b9ee2..233a2f923730 100644 --- a/drivers/net/irda/Makefile +++ b/drivers/net/irda/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_MCP2120_DONGLE) += mcp2120-sir.o obj-$(CONFIG_ACT200L_DONGLE) += act200l-sir.o obj-$(CONFIG_MA600_DONGLE) += ma600-sir.o obj-$(CONFIG_TOIM3232_DONGLE) += toim3232-sir.o +obj-$(CONFIG_KINGSUN_DONGLE) += kingsun-sir.o # The SIR helper module sir-dev-objs := sir_dev.o sir_dongle.o diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c new file mode 100644 index 000000000000..217429122e79 --- /dev/null +++ b/drivers/net/irda/kingsun-sir.c @@ -0,0 +1,657 @@ +/***************************************************************************** +* +* Filename: kingsun-sir.c +* Version: 0.1.1 +* Description: Irda KingSun/DonShine USB Dongle +* Status: Experimental +* Author: Alex Villac�s Lasso <a_villacis@palosanto.com> +* +* Based on stir4200 and mcs7780 drivers, with (strange?) differences +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +* +*****************************************************************************/ + +/* + * This is my current (2007-04-25) understanding of how this dongle is supposed + * to work. This is based on reverse-engineering and examination of the packet + * data sent and received by the WinXP driver using USBSnoopy. Feel free to + * update here as more of this dongle is known: + * + * General: Unlike the other USB IrDA dongles, this particular dongle exposes, + * not two bulk (in and out) endpoints, but two *interrupt* ones. This dongle, + * like the bulk based ones (stir4200.c and mcs7780.c), requires polling in + * order to receive data. + * Transmission: Just like stir4200, this dongle uses a raw stream of data, + * which needs to be wrapped and escaped in a similar way as in stir4200.c. + * Reception: Poll-based, as in stir4200. Each read returns the contents of a + * 8-byte buffer, of which the first byte (LSB) indicates the number of bytes + * (1-7) of valid data contained within the remaining 7 bytes. For example, if + * the buffer had the following contents: + * 06 ff ff ff c0 01 04 aa + * This means that (06) there are 6 bytes of valid data. The byte 0xaa at the + * end is garbage (left over from a previous reception) and is discarded. + * If a read returns an "impossible" value as the length of valid data (such as + * 0x36) in the first byte, then the buffer is uninitialized (as is the case of + * first plug-in) and its contents should be discarded. There is currently no + * evidence that the top 5 bits of the 1st byte of the buffer can have values + * other than 0 once reception begins. + * Once valid bytes are collected, the assembled stream is a sequence of + * wrapped IrDA frames that is unwrapped and unescaped as in stir4200.c. + * BIG FAT WARNING: the dongle does *not* reset the RX buffer in any way after + * a successful read from the host, which means that in absence of further + * reception, repeated reads from the dongle will return the exact same + * contents repeatedly. Attempts to be smart and cache a previous read seem + * to result in corrupted packets, so this driver depends on the unwrap logic + * to sort out any repeated reads. + * Speed change: no commands observed so far to change speed, assumed fixed + * 9600bps (SIR). + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/kref.h> +#include <linux/usb.h> +#include <linux/device.h> +#include <linux/crc32.h> + +#include <asm/unaligned.h> +#include <asm/byteorder.h> +#include <asm/uaccess.h> + +#include <net/irda/irda.h> +#include <net/irda/wrapper.h> +#include <net/irda/crc.h> + +/* + * According to lsusb, 0x07c0 is assigned to + * "Code Mercenaries Hard- und Software GmbH" + */ +#define KING_VENDOR_ID 0x07c0 +#define KING_PRODUCT_ID 0x4200 + +/* These are the currently known USB ids */ +static struct usb_device_id dongles[] = { + /* KingSun Co,Ltd IrDA/USB Bridge */ + { USB_DEVICE(KING_VENDOR_ID, KING_PRODUCT_ID) }, + { } +}; + +MODULE_DEVICE_TABLE(usb, dongles); + +#define KINGSUN_MTT 0x07 + +#define KINGSUN_FIFO_SIZE 4096 +#define KINGSUN_EP_IN 0 +#define KINGSUN_EP_OUT 1 + +struct kingsun_cb { + struct usb_device *usbdev; /* init: probe_irda */ + struct net_device *netdev; /* network layer */ + struct irlap_cb *irlap; /* The link layer we are binded to */ + struct net_device_stats stats; /* network statistics */ + struct qos_info qos; + + __u8 *in_buf; /* receive buffer */ + __u8 *out_buf; /* transmit buffer */ + __u8 max_rx; /* max. atomic read from dongle + (usually 8), also size of in_buf */ + __u8 max_tx; /* max. atomic write to dongle + (usually 8) */ + + iobuff_t rx_buff; /* receive unwrap state machine */ + struct timeval rx_time; + spinlock_t lock; + int receiving; + + __u8 ep_in; + __u8 ep_out; + + struct urb *tx_urb; + struct urb *rx_urb; +}; + +/* Callback transmission routine */ +static void kingsun_send_irq(struct urb *urb) +{ + struct kingsun_cb *kingsun = urb->context; + struct net_device *netdev = kingsun->netdev; + + /* in process of stopping, just drop data */ + if (!netif_running(kingsun->netdev)) { + err("kingsun_send_irq: Network not running!"); + return; + } + + /* unlink, shutdown, unplug, other nasties */ + if (urb->status != 0) { + err("kingsun_send_irq: urb asynchronously failed - %d", + urb->status); + } + netif_wake_queue(netdev); +} + +/* + * Called from net/core when new frame is available. + */ +static int kingsun_hard_xmit(struct sk_buff *skb, struct net_device *netdev) +{ + struct kingsun_cb *kingsun; + int wraplen; + int ret = 0; + + if (skb == NULL || netdev == NULL) + return -EINVAL; + + netif_stop_queue(netdev); + + /* the IRDA wrapping routines don't deal with non linear skb */ + SKB_LINEAR_ASSERT(skb); + + kingsun = netdev_priv(netdev); + + spin_lock(&kingsun->lock); + + /* Append data to the end of whatever data remains to be transmitted */ + wraplen = async_wrap_skb(skb, + kingsun->out_buf, + KINGSUN_FIFO_SIZE); + + /* Calculate how much data can be transmitted in this urb */ + usb_fill_int_urb(kingsun->tx_urb, kingsun->usbdev, + usb_sndintpipe(kingsun->usbdev, kingsun->ep_out), + kingsun->out_buf, wraplen, kingsun_send_irq, + kingsun, 1); + + if ((ret = usb_submit_urb(kingsun->tx_urb, GFP_ATOMIC))) { + err("kingsun_hard_xmit: failed tx_urb submit: %d", ret); + switch (ret) { + case -ENODEV: + case -EPIPE: + break; + default: + kingsun->stats.tx_errors++; + netif_start_queue(netdev); + } + } else { + kingsun->stats.tx_packets++; + kingsun->stats.tx_bytes += skb->len; + } + + dev_kfree_skb(skb); + spin_unlock(&kingsun->lock); + + return ret; +} + +/* Receive callback function */ +static void kingsun_rcv_irq(struct urb *urb) +{ + struct kingsun_cb *kingsun = urb->context; + int ret; + + /* in process of stopping, just drop data */ + if (!netif_running(kingsun->netdev)) { + kingsun->receiving = 0; + return; + } + + /* unlink, shutdown, unplug, other nasties */ + if (urb->status != 0) { + err("kingsun_rcv_irq: urb asynchronously failed - %d", + urb->status); + kingsun->receiving = 0; + return; + } + + if (urb->actual_length == kingsun->max_rx) { + __u8 *bytes = urb->transfer_buffer; + int i; + + /* The very first byte in the buffer indicates the length of + valid data in the read. This byte must be in the range + 1..kingsun->max_rx -1 . Values outside this range indicate + an uninitialized Rx buffer when the dongle has just been + plugged in. */ + if (bytes[0] >= 1 && bytes[0] < kingsun->max_rx) { + for (i = 1; i <= bytes[0]; i++) { + async_unwrap_char(kingsun->netdev, + &kingsun->stats, + &kingsun->rx_buff, bytes[i]); + } + kingsun->netdev->last_rx = jiffies; + do_gettimeofday(&kingsun->rx_time); + kingsun->receiving = + (kingsun->rx_buff.state != OUTSIDE_FRAME) + ? 1 : 0; + } + } else if (urb->actual_length > 0) { + err("%s(): Unexpected response length, expected %d got %d", + __FUNCTION__, kingsun->max_rx, urb->actual_length); + } + /* This urb has already been filled in kingsun_net_open */ + ret = usb_submit_urb(urb, GFP_ATOMIC); +} + +/* + * Function kingsun_net_open (dev) + * + * Network device is taken up. Usually this is done by "ifconfig irda0 up" + */ +static int kingsun_net_open(struct net_device *netdev) +{ + struct kingsun_cb *kingsun = netdev_priv(netdev); + int err = -ENOMEM; + char hwname[16]; + + /* At this point, urbs are NULL, and skb is NULL (see kingsun_probe) */ + kingsun->receiving = 0; + + /* Initialize for SIR to copy data directly into skb. */ + kingsun->rx_buff.in_frame = FALSE; + kingsun->rx_buff.state = OUTSIDE_FRAME; + kingsun->rx_buff.truesize = IRDA_SKB_MAX_MTU; + kingsun->rx_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU); + if (!kingsun->rx_buff.skb) + goto free_mem; + + skb_reserve(kingsun->rx_buff.skb, 1); + kingsun->rx_buff.head = kingsun->rx_buff.skb->data; + do_gettimeofday(&kingsun->rx_time); + + kingsun->rx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!kingsun->rx_urb) + goto free_mem; + + kingsun->tx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!kingsun->tx_urb) + goto free_mem; + + /* + * Now that everything should be initialized properly, + * Open new IrLAP layer instance to take care of us... + */ + sprintf(hwname, "usb#%d", kingsun->usbdev->devnum); + kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname); + if (!kingsun->irlap) { + err("kingsun-sir: irlap_open failed"); + goto free_mem; + } + + /* Start first reception */ + usb_fill_int_urb(kingsun->rx_urb, kingsun->usbdev, + usb_rcvintpipe(kingsun->usbdev, kingsun->ep_in), + kingsun->in_buf, kingsun->max_rx, + kingsun_rcv_irq, kingsun, 1); + kingsun->rx_urb->status = 0; + err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL); + if (err) { + err("kingsun-sir: first urb-submit failed: %d", err); + goto close_irlap; + } + + netif_start_queue(netdev); + + /* Situation at this point: + - all work buffers allocated + - urbs allocated and ready to fill + - max rx packet known (in max_rx) + - unwrap state machine initialized, in state outside of any frame + - receive request in progress + - IrLAP layer started, about to hand over packets to send + */ + + return 0; + + close_irlap: + irlap_close(kingsun->irlap); + free_mem: + if (kingsun->tx_urb) { + usb_free_urb(kingsun->tx_urb); + kingsun->tx_urb = NULL; + } + if (kingsun->rx_urb) { + usb_free_urb(kingsun->rx_urb); + kingsun->rx_urb = NULL; + } + if (kingsun->rx_buff.skb) { + kfree_skb(kingsun->rx_buff.skb); + kingsun->rx_buff.skb = NULL; + kingsun->rx_buff.head = NULL; + } + return err; +} + +/* + * Function kingsun_net_close (kingsun) + * + * Network device is taken down. Usually this is done by + * "ifconfig irda0 down" + */ +static int kingsun_net_close(struct net_device *netdev) +{ + struct kingsun_cb *kingsun = netdev_priv(netdev); + + /* Stop transmit processing */ + netif_stop_queue(netdev); + + /* Mop up receive && transmit urb's */ + usb_kill_urb(kingsun->tx_urb); + usb_kill_urb(kingsun->rx_urb); + + usb_free_urb(kingsun->tx_urb); + usb_free_urb(kingsun->rx_urb); + + kingsun->tx_urb = NULL; + kingsun->rx_urb = NULL; + + kfree_skb(kingsun->rx_buff.skb); + kingsun->rx_buff.skb = NULL; + kingsun->rx_buff.head = NULL; + kingsun->rx_buff.in_frame = FALSE; + kingsun->rx_buff.state = OUTSIDE_FRAME; + kingsun->receiving = 0; + + /* Stop and remove instance of IrLAP */ + if (kingsun->irlap) + irlap_close(kingsun->irlap); + + kingsun->irlap = NULL; + + return 0; +} + +/* + * IOCTLs : Extra out-of-band network commands... + */ +static int kingsun_net_ioctl(struct net_device *netdev, struct ifreq *rq, + int cmd) +{ + struct if_irda_req *irq = (struct if_irda_req *) rq; + struct kingsun_cb *kingsun = netdev_priv(netdev); + int ret = 0; + + switch (cmd) { + case SIOCSBANDWIDTH: /* Set bandwidth */ + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + /* Check if the device is still there */ + if (netif_device_present(kingsun->netdev)) + /* No observed commands for speed change */ + ret = -EOPNOTSUPP; + break; + + case SIOCSMEDIABUSY: /* Set media busy */ + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + /* Check if the IrDA stack is still there */ + if (netif_running(kingsun->netdev)) + irda_device_set_media_busy(kingsun->netdev, TRUE); + break; + + case SIOCGRECEIVING: + /* Only approximately true */ + irq->ifr_receiving = kingsun->receiving; + break; + + default: + ret = -EOPNOTSUPP; + } + + return ret; +} + +/* + * Get device stats (for /proc/net/dev and ifconfig) + */ +static struct net_device_stats * +kingsun_net_get_stats(struct net_device *netdev) +{ + struct kingsun_cb *kingsun = netdev_priv(netdev); + return &kingsun->stats; +} + +/* + * This routine is called by the USB subsystem for each new device + * in the system. We need to check if the device is ours, and in + * this case start handling it. + */ +static int kingsun_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_host_interface *interface; + struct usb_endpoint_descriptor *endpoint; + + struct usb_device *dev = interface_to_usbdev(intf); + struct kingsun_cb *kingsun = NULL; + struct net_device *net = NULL; + int ret = -ENOMEM; + int pipe, maxp_in, maxp_out; + __u8 ep_in; + __u8 ep_out; + + /* Check that there really are two interrupt endpoints. + Check based on the one in drivers/usb/input/usbmouse.c + */ + interface = intf->cur_altsetting; + if (interface->desc.bNumEndpoints != 2) { + err("kingsun-sir: expected 2 endpoints, found %d", + interface->desc.bNumEndpoints); + return -ENODEV; + } + endpoint = &interface->endpoint[KINGSUN_EP_IN].desc; + if (!usb_endpoint_is_int_in(endpoint)) { + err("kingsun-sir: endpoint 0 is not interrupt IN"); + return -ENODEV; + } + + ep_in = endpoint->bEndpointAddress; + pipe = usb_rcvintpipe(dev, ep_in); + maxp_in = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); + if (maxp_in > 255 || maxp_in <= 1) { + err("%s: endpoint 0 has max packet size %d not in range", + __FILE__, maxp_in); + return -ENODEV; + } + + endpoint = &interface->endpoint[KINGSUN_EP_OUT].desc; + if (!usb_endpoint_is_int_out(endpoint)) { + err("kingsun-sir: endpoint 1 is not interrupt OUT"); + return -ENODEV; + } + + ep_out = endpoint->bEndpointAddress; + pipe = usb_sndintpipe(dev, ep_out); + maxp_out = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); + + /* Allocate network device container. */ + net = alloc_irdadev(sizeof(*kingsun)); + if(!net) + goto err_out1; + + SET_MODULE_OWNER(net); + SET_NETDEV_DEV(net, &intf->dev); + kingsun = netdev_priv(net); + kingsun->irlap = NULL; + kingsun->tx_urb = NULL; + kingsun->rx_urb = NULL; + kingsun->ep_in = ep_in; + kingsun->ep_out = ep_out; + kingsun->in_buf = NULL; + kingsun->out_buf = NULL; + kingsun->max_rx = (__u8)maxp_in; + kingsun->max_tx = (__u8)maxp_out; + kingsun->netdev = net; + kingsun->usbdev = dev; + kingsun->rx_buff.in_frame = FALSE; + kingsun->rx_buff.state = OUTSIDE_FRAME; + kingsun->rx_buff.skb = NULL; + kingsun->receiving = 0; + spin_lock_init(&kingsun->lock); + + /* Allocate input buffer */ + kingsun->in_buf = (__u8 *)kmalloc(kingsun->max_rx, GFP_KERNEL); + if (!kingsun->in_buf) + goto free_mem; + + /* Allocate output buffer */ + kingsun->out_buf = (__u8 *)kmalloc(KINGSUN_FIFO_SIZE, GFP_KERNEL); + if (!kingsun->out_buf) + goto free_mem; + + printk(KERN_INFO "KingSun/DonShine IRDA/USB found at address %d, " + "Vendor: %x, Product: %x\n", + dev->devnum, le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); + + /* Initialize QoS for this device */ + irda_init_max_qos_capabilies(&kingsun->qos); + + /* That's the Rx capability. */ + kingsun->qos.baud_rate.bits &= IR_9600; + kingsun->qos.min_turn_time.bits &= KINGSUN_MTT; + irda_qos_bits_to_value(&kingsun->qos); + + /* Override the network functions we need to use */ + net->hard_start_xmit = kingsun_hard_xmit; + net->open = kingsun_net_open; + net->stop = kingsun_net_close; + net->get_stats = kingsun_net_get_stats; + net->do_ioctl = kingsun_net_ioctl; + + ret = register_netdev(net); + if (ret != 0) + goto free_mem; + + info("IrDA: Registered KingSun/DonShine device %s", net->name); + + usb_set_intfdata(intf, kingsun); + + /* Situation at this point: + - all work buffers allocated + - urbs not allocated, set to NULL + - max rx packet known (in max_rx) + - unwrap state machine (partially) initialized, but skb == NULL + */ + + return 0; + +free_mem: + if (kingsun->out_buf) kfree(kingsun->out_buf); + if (kingsun->in_buf) kfree(kingsun->in_buf); + free_netdev(net); +err_out1: + return ret; +} + +/* + * The current device is removed, the USB layer tell us to shut it down... + */ +static void kingsun_disconnect(struct usb_interface *intf) +{ + struct kingsun_cb *kingsun = usb_get_intfdata(intf); + + if (!kingsun) + return; + + unregister_netdev(kingsun->netdev); + + /* Mop up receive && transmit urb's */ + if (kingsun->tx_urb != NULL) { + usb_kill_urb(kingsun->tx_urb); + usb_free_urb(kingsun->tx_urb); + kingsun->tx_urb = NULL; + } + if (kingsun->rx_urb != NULL) { + usb_kill_urb(kingsun->rx_urb); + usb_free_urb(kingsun->rx_urb); + kingsun->rx_urb = NULL; + } + + kfree(kingsun->out_buf); + kfree(kingsun->in_buf); + free_netdev(kingsun->netdev); + + usb_set_intfdata(intf, NULL); +} + +#ifdef CONFIG_PM +/* USB suspend, so power off the transmitter/receiver */ +static int kingsun_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct kingsun_cb *kingsun = usb_get_intfdata(intf); + + netif_device_detach(kingsun->netdev); + if (kingsun->tx_urb != NULL) usb_kill_urb(kingsun->tx_urb); + if (kingsun->rx_urb != NULL) usb_kill_urb(kingsun->rx_urb); + return 0; +} + +/* Coming out of suspend, so reset hardware */ +static int kingsun_resume(struct usb_interface *intf) +{ + struct kingsun_cb *kingsun = usb_get_intfdata(intf); + + if (kingsun->rx_urb != NULL) + usb_submit_urb(kingsun->rx_urb, GFP_KERNEL); + netif_device_attach(kingsun->netdev); + + return 0; +} +#endif + +/* + * USB device callbacks + */ +static struct usb_driver irda_driver = { + .name = "kingsun-sir", + .probe = kingsun_probe, + .disconnect = kingsun_disconnect, + .id_table = dongles, +#ifdef CONFIG_PM + .suspend = kingsun_suspend, + .resume = kingsun_resume, +#endif +}; + +/* + * Module insertion + */ +static int __init kingsun_init(void) +{ + return usb_register(&irda_driver); +} +module_init(kingsun_init); + +/* + * Module removal + */ +static void __exit kingsun_cleanup(void) +{ + /* Deregister the driver and remove all pending instances */ + usb_deregister(&irda_driver); +} +module_exit(kingsun_cleanup); + +MODULE_AUTHOR("Alex Villac�s Lasso <a_villacis@palosanto.com>"); +MODULE_DESCRIPTION("IrDA-USB Dongle Driver for KingSun/DonShine"); +MODULE_LICENSE("GPL"); |