diff options
Diffstat (limited to 'drivers/net/natsemi.c')
| -rw-r--r-- | drivers/net/natsemi.c | 117 |
1 files changed, 3 insertions, 114 deletions
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 9df2628be1e7..db0475a1102f 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -20,120 +20,9 @@ Support information and updates available at http://www.scyld.com/network/netsemi.html + [link no longer provides useful info -jgarzik] - Linux kernel modifications: - - Version 1.0.1: - - Spinlock fixes - - Bug fixes and better intr performance (Tjeerd) - Version 1.0.2: - - Now reads correct MAC address from eeprom - Version 1.0.3: - - Eliminate redundant priv->tx_full flag - - Call netif_start_queue from dev->tx_timeout - - wmb() in start_tx() to flush data - - Update Tx locking - - Clean up PCI enable (davej) - Version 1.0.4: - - Merge Donald Becker's natsemi.c version 1.07 - Version 1.0.5: - - { fill me in } - Version 1.0.6: - * ethtool support (jgarzik) - * Proper initialization of the card (which sometimes - fails to occur and leaves the card in a non-functional - state). (uzi) - - * Some documented register settings to optimize some - of the 100Mbit autodetection circuitry in rev C cards. (uzi) - - * Polling of the PHY intr for stuff like link state - change and auto- negotiation to finally work properly. (uzi) - - * One-liner removal of a duplicate declaration of - netdev_error(). (uzi) - - Version 1.0.7: (Manfred Spraul) - * pci dma - * SMP locking update - * full reset added into tx_timeout - * correct multicast hash generation (both big and little endian) - [copied from a natsemi driver version - from Myrio Corporation, Greg Smith] - * suspend/resume - - version 1.0.8 (Tim Hockin <thockin@sun.com>) - * ETHTOOL_* support - * Wake on lan support (Erik Gilling) - * MXDMA fixes for serverworks - * EEPROM reload - - version 1.0.9 (Manfred Spraul) - * Main change: fix lack of synchronize - netif_close/netif_suspend against a last interrupt - or packet. - * do not enable superflous interrupts (e.g. the - drivers relies on TxDone - TxIntr not needed) - * wait that the hardware has really stopped in close - and suspend. - * workaround for the (at least) gcc-2.95.1 compiler - problem. Also simplifies the code a bit. - * disable_irq() in tx_timeout - needed to protect - against rx interrupts. - * stop the nic before switching into silent rx mode - for wol (required according to docu). - - version 1.0.10: - * use long for ee_addr (various) - * print pointers properly (DaveM) - * include asm/irq.h (?) - - version 1.0.11: - * check and reset if PHY errors appear (Adrian Sun) - * WoL cleanup (Tim Hockin) - * Magic number cleanup (Tim Hockin) - * Don't reload EEPROM on every reset (Tim Hockin) - * Save and restore EEPROM state across reset (Tim Hockin) - * MDIO Cleanup (Tim Hockin) - * Reformat register offsets/bits (jgarzik) - - version 1.0.12: - * ETHTOOL_* further support (Tim Hockin) - - version 1.0.13: - * ETHTOOL_[G]EEPROM support (Tim Hockin) - - version 1.0.13: - * crc cleanup (Matt Domsch <Matt_Domsch@dell.com>) - - version 1.0.14: - * Cleanup some messages and autoneg in ethtool (Tim Hockin) - - version 1.0.15: - * Get rid of cable_magic flag - * use new (National provided) solution for cable magic issue - - version 1.0.16: - * call netdev_rx() for RxErrors (Manfred Spraul) - * formatting and cleanups - * change options and full_duplex arrays to be zero - initialized - * enable only the WoL and PHY interrupts in wol mode - - version 1.0.17: - * only do cable_magic on 83815 and early 83816 (Tim Hockin) - * create a function for rx refill (Manfred Spraul) - * combine drain_ring and init_ring (Manfred Spraul) - * oom handling (Manfred Spraul) - * hands_off instead of playing with netif_device_{de,a}ttach - (Manfred Spraul) - * be sure to write the MAC back to the chip (Manfred Spraul) - * lengthen EEPROM timeout, and always warn about timeouts - (Manfred Spraul) - * comments update (Manfred) - * do the right thing on a phy-reset (Manfred and Tim) - TODO: * big endian support with CFG:BEM instead of cpu_to_le32 */ @@ -165,8 +54,8 @@ #include <asm/uaccess.h> #define DRV_NAME "natsemi" -#define DRV_VERSION "1.07+LK1.0.17" -#define DRV_RELDATE "Sep 27, 2002" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "June 27, 2006" #define RX_OFFSET 2 |