diff options
Diffstat (limited to 'drivers/net/phy/marvell.c')
| -rw-r--r-- | drivers/net/phy/marvell.c | 71 |
1 files changed, 39 insertions, 32 deletions
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index c2dcf02df202..c60c147708c4 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -240,34 +240,6 @@ static int marvell_config_aneg(struct phy_device *phydev) { int err; - /* The Marvell PHY has an errata which requires - * that certain registers get written in order - * to restart autonegotiation */ - err = phy_write(phydev, MII_BMCR, BMCR_RESET); - - if (err < 0) - return err; - - err = phy_write(phydev, 0x1d, 0x1f); - if (err < 0) - return err; - - err = phy_write(phydev, 0x1e, 0x200c); - if (err < 0) - return err; - - err = phy_write(phydev, 0x1d, 0x5); - if (err < 0) - return err; - - err = phy_write(phydev, 0x1e, 0); - if (err < 0) - return err; - - err = phy_write(phydev, 0x1e, 0x100); - if (err < 0) - return err; - err = marvell_set_polarity(phydev, phydev->mdix); if (err < 0) return err; @@ -301,6 +273,42 @@ static int marvell_config_aneg(struct phy_device *phydev) return 0; } +static int m88e1101_config_aneg(struct phy_device *phydev) +{ + int err; + + /* This Marvell PHY has an errata which requires + * that certain registers get written in order + * to restart autonegotiation + */ + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + + if (err < 0) + return err; + + err = phy_write(phydev, 0x1d, 0x1f); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1e, 0x200c); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1d, 0x5); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1e, 0); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1e, 0x100); + if (err < 0) + return err; + + return marvell_config_aneg(phydev); +} + static int m88e1111_config_aneg(struct phy_device *phydev) { int err; @@ -1106,8 +1114,6 @@ static int marvell_read_status_page(struct phy_device *phydev, int page) if (adv < 0) return adv; - lpa &= adv; - if (status & MII_M1011_PHY_STATUS_FULLDUPLEX) phydev->duplex = DUPLEX_FULL; else @@ -1194,7 +1200,8 @@ static int marvell_read_status(struct phy_device *phydev) int err; /* Check the fiber mode first */ - if (phydev->supported & SUPPORTED_FIBRE) { + if (phydev->supported & SUPPORTED_FIBRE && + phydev->interface != PHY_INTERFACE_MODE_SGMII) { err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_FIBER); if (err < 0) goto error; @@ -1491,7 +1498,7 @@ static struct phy_driver marvell_drivers[] = { .probe = marvell_probe, .flags = PHY_HAS_INTERRUPT, .config_init = &marvell_config_init, - .config_aneg = &marvell_config_aneg, + .config_aneg = &m88e1101_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, |