diff options
Diffstat (limited to 'drivers/net/phy/micrel.c')
| -rw-r--r-- | drivers/net/phy/micrel.c | 111 |
1 files changed, 109 insertions, 2 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 64aa03aed770..d0429dc8f561 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -431,6 +431,10 @@ struct kszphy_ptp_priv { spinlock_t seconds_lock; }; +struct kszphy_phy_stats { + u64 rx_err_pkt_cnt; +}; + struct kszphy_priv { struct kszphy_ptp_priv ptp_priv; const struct kszphy_type *type; @@ -441,6 +445,7 @@ struct kszphy_priv { bool rmii_ref_clk_sel_val; bool clk_enable; u64 stats[ARRAY_SIZE(kszphy_hw_stats)]; + struct kszphy_phy_stats phy_stats; }; static const struct kszphy_type lan8814_type = { @@ -1718,7 +1723,8 @@ static int ksz9x31_cable_test_fault_length(struct phy_device *phydev, u16 stat) * * distance to fault = (VCT_DATA - 22) * 4 / cable propagation velocity */ - if (phydev_id_compare(phydev, PHY_ID_KSZ9131)) + if (phydev_id_compare(phydev, PHY_ID_KSZ9131) || + phydev_id_compare(phydev, PHY_ID_KSZ9477)) dt = clamp(dt - 22, 0, 255); return (dt * 400) / 10; @@ -1792,12 +1798,20 @@ static int ksz9x31_cable_test_get_status(struct phy_device *phydev, bool *finished) { struct kszphy_priv *priv = phydev->priv; - unsigned long pair_mask = 0xf; + unsigned long pair_mask; int retries = 20; int pair, ret, rv; *finished = false; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, + phydev->supported) || + linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, + phydev->supported)) + pair_mask = 0xf; /* All pairs */ + else + pair_mask = 0x3; /* Pairs A and B only */ + /* Try harder if link partner is active */ while (pair_mask && retries--) { for_each_set_bit(pair, &pair_mask, 4) { @@ -1948,6 +1962,56 @@ static int ksz886x_read_status(struct phy_device *phydev) return genphy_read_status(phydev); } +static int ksz9477_mdix_update(struct phy_device *phydev) +{ + if (phydev->mdix_ctrl != ETH_TP_MDI_AUTO) + phydev->mdix = phydev->mdix_ctrl; + else + phydev->mdix = ETH_TP_MDI_INVALID; + + return 0; +} + +static int ksz9477_read_mdix_ctrl(struct phy_device *phydev) +{ + int val; + + val = phy_read(phydev, MII_KSZ9131_AUTO_MDIX); + if (val < 0) + return val; + + if (!(val & MII_KSZ9131_AUTO_MDIX_SWAP_OFF)) + phydev->mdix_ctrl = ETH_TP_MDI_AUTO; + else if (val & MII_KSZ9131_AUTO_MDI_SET) + phydev->mdix_ctrl = ETH_TP_MDI; + else + phydev->mdix_ctrl = ETH_TP_MDI_X; + + return 0; +} + +static int ksz9477_read_status(struct phy_device *phydev) +{ + int ret; + + ret = ksz9477_mdix_update(phydev); + if (ret) + return ret; + + return genphy_read_status(phydev); +} + +static int ksz9477_config_aneg(struct phy_device *phydev) +{ + int ret; + + ret = ksz9131_config_mdix(phydev, phydev->mdix_ctrl); + if (ret) + return ret; + + return genphy_config_aneg(phydev); +} + struct ksz9477_errata_write { u8 dev_addr; u8 reg_addr; @@ -2029,6 +2093,13 @@ static int ksz9477_config_init(struct phy_device *phydev) return err; } + /* Read initial MDI-X config state. So, we do not need to poll it + * later on. + */ + err = ksz9477_read_mdix_ctrl(phydev); + if (err) + return err; + return kszphy_config_init(phydev); } @@ -2073,6 +2144,35 @@ static void kszphy_get_stats(struct phy_device *phydev, data[i] = kszphy_get_stat(phydev, i); } +/* KSZ9477 PHY RXER Counter. Probably supported by other PHYs like KSZ9313, + * etc. The counter is incremented when the PHY receives a frame with one or + * more symbol errors. The counter is cleared when the register is read. + */ +#define MII_KSZ9477_PHY_RXER_COUNTER 0x15 + +static int kszphy_update_stats(struct phy_device *phydev) +{ + struct kszphy_priv *priv = phydev->priv; + int ret; + + ret = phy_read(phydev, MII_KSZ9477_PHY_RXER_COUNTER); + if (ret < 0) + return ret; + + priv->phy_stats.rx_err_pkt_cnt += ret; + + return 0; +} + +static void kszphy_get_phy_stats(struct phy_device *phydev, + struct ethtool_eth_phy_stats *eth_stats, + struct ethtool_phy_stats *stats) +{ + struct kszphy_priv *priv = phydev->priv; + + stats->rx_errors = priv->phy_stats.rx_err_pkt_cnt; +} + static void kszphy_enable_clk(struct phy_device *phydev) { struct kszphy_priv *priv = phydev->priv; @@ -5688,12 +5788,19 @@ static struct phy_driver ksphy_driver[] = { .phy_id = PHY_ID_KSZ9477, .phy_id_mask = MICREL_PHY_ID_MASK, .name = "Microchip KSZ9477", + .probe = kszphy_probe, /* PHY_GBIT_FEATURES */ .config_init = ksz9477_config_init, .config_intr = kszphy_config_intr, + .config_aneg = ksz9477_config_aneg, + .read_status = ksz9477_read_status, .handle_interrupt = kszphy_handle_interrupt, .suspend = genphy_suspend, .resume = ksz9477_resume, + .get_phy_stats = kszphy_get_phy_stats, + .update_stats = kszphy_update_stats, + .cable_test_start = ksz9x31_cable_test_start, + .cable_test_get_status = ksz9x31_cable_test_get_status, } }; module_phy_driver(ksphy_driver); |