diff options
Diffstat (limited to 'drivers/net/phy/sfp-bus.c')
| -rw-r--r-- | drivers/net/phy/sfp-bus.c | 20 |
1 files changed, 17 insertions, 3 deletions
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 20b91f5dfc6e..3c67ad9951ab 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -265,6 +265,12 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, br_min <= 1300 && br_max >= 1200) phylink_set(modes, 1000baseX_Full); + /* 100Base-FX, 100Base-LX, 100Base-PX, 100Base-BX10 */ + if (id->base.e100_base_fx || id->base.e100_base_lx) + phylink_set(modes, 100baseFX_Full); + if ((id->base.e_base_px || id->base.e_base_bx10) && br_nom == 100) + phylink_set(modes, 100baseFX_Full); + /* For active or passive cables, select the link modes * based on the bit rates and the cable compliance bytes. */ @@ -337,11 +343,16 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, * the bitrate to determine supported modes. Some BiDi modules (eg, * 1310nm/1550nm) are not 1000BASE-BX compliant due to the differing * wavelengths, so do not set any transceiver bits. + * + * Do the same for modules supporting 2500BASE-X. Note that some + * modules use 2500Mbaud rather than 3100 or 3200Mbaud for + * 2500BASE-X, so we allow some slack here. */ - if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS)) { - /* If the bit rate allows 1000baseX */ - if (br_nom && br_min <= 1300 && br_max >= 1200) + if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS) && br_nom) { + if (br_min <= 1300 && br_max >= 1200) phylink_set(modes, 1000baseX_Full); + if (br_min <= 3200 && br_max >= 2500) + phylink_set(modes, 2500baseX_Full); } if (bus->sfp_quirk) @@ -384,6 +395,9 @@ phy_interface_t sfp_select_interface(struct sfp_bus *bus, if (phylink_test(link_modes, 1000baseX_Full)) return PHY_INTERFACE_MODE_1000BASEX; + if (phylink_test(link_modes, 100baseFX_Full)) + return PHY_INTERFACE_MODE_100BASEX; + dev_warn(bus->sfp_dev, "Unable to ascertain link mode\n"); return PHY_INTERFACE_MODE_NA; |