summaryrefslogtreecommitdiff
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/Kconfig9
-rw-r--r--drivers/net/phy/Makefile1
-rw-r--r--drivers/net/phy/broadcom.c201
-rw-r--r--drivers/net/phy/mdio-bitbang.c2
-rw-r--r--drivers/net/phy/mdio-ofgpio.c205
5 files changed, 415 insertions, 3 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 6eb2d31d1e34..d55932acd887 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -53,7 +53,8 @@ config SMSC_PHY
config BROADCOM_PHY
tristate "Drivers for Broadcom PHYs"
---help---
- Currently supports the BCM5411, BCM5421 and BCM5461 PHYs.
+ Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
+ and BCM5482 PHYs.
config ICPLUS_PHY
tristate "Drivers for ICPlus PHYs"
@@ -83,4 +84,10 @@ config MDIO_BITBANG
If in doubt, say N.
+config MDIO_OF_GPIO
+ tristate "Support for GPIO lib-based bitbanged MDIO buses"
+ depends on MDIO_BITBANG && OF_GPIO
+ ---help---
+ Supports GPIO lib-based MDIO busses.
+
endif # PHYLIB
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 5997d6ef702b..eee329fa6f53 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+obj-$(CONFIG_MDIO_OF_GPIO) += mdio-ofgpio.o
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 60c5cfe96918..4b4dc98ad165 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -24,6 +24,12 @@
#define MII_BCM54XX_ESR 0x11 /* BCM54xx extended status register */
#define MII_BCM54XX_ESR_IS 0x1000 /* Interrupt status */
+#define MII_BCM54XX_EXP_DATA 0x15 /* Expansion register data */
+#define MII_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
+#define MII_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */
+#define MII_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
+
+#define MII_BCM54XX_AUX_CTL 0x18 /* Auxiliary control register */
#define MII_BCM54XX_ISR 0x1a /* BCM54xx interrupt status register */
#define MII_BCM54XX_IMR 0x1b /* BCM54xx interrupt mask register */
#define MII_BCM54XX_INT_CRCERR 0x0001 /* CRC error */
@@ -42,10 +48,120 @@
#define MII_BCM54XX_INT_MDIX 0x2000 /* MDIX status change */
#define MII_BCM54XX_INT_PSERR 0x4000 /* Pair swap error */
+#define MII_BCM54XX_SHD 0x1c /* 0x1c shadow registers */
+#define MII_BCM54XX_SHD_WRITE 0x8000
+#define MII_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
+#define MII_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
+
+/*
+ * Broadcom LED source encodings. These are used in BCM5461, BCM5481,
+ * BCM5482, and possibly some others.
+ */
+#define BCM_LED_SRC_LINKSPD1 0x0
+#define BCM_LED_SRC_LINKSPD2 0x1
+#define BCM_LED_SRC_XMITLED 0x2
+#define BCM_LED_SRC_ACTIVITYLED 0x3
+#define BCM_LED_SRC_FDXLED 0x4
+#define BCM_LED_SRC_SLAVE 0x5
+#define BCM_LED_SRC_INTR 0x6
+#define BCM_LED_SRC_QUALITY 0x7
+#define BCM_LED_SRC_RCVLED 0x8
+#define BCM_LED_SRC_MULTICOLOR1 0xa
+#define BCM_LED_SRC_OPENSHORT 0xb
+#define BCM_LED_SRC_OFF 0xe /* Tied high */
+#define BCM_LED_SRC_ON 0xf /* Tied low */
+
+/*
+ * BCM5482: Shadow registers
+ * Shadow values go into bits [14:10] of register 0x1c to select a shadow
+ * register to access.
+ */
+#define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */
+ /* LED3 / ~LINKSPD[2] selector */
+#define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4)
+ /* LED1 / ~LINKSPD[1] selector */
+#define BCM5482_SHD_LEDS1_LED1(src) ((src & 0xf) << 0)
+#define BCM5482_SHD_SSD 0x14 /* 10100: Secondary SerDes control */
+#define BCM5482_SHD_SSD_LEDM 0x0008 /* SSD LED Mode enable */
+#define BCM5482_SHD_SSD_EN 0x0001 /* SSD enable */
+#define BCM5482_SHD_MODE 0x1f /* 11111: Mode Control Register */
+#define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */
+
+/*
+ * BCM5482: Secondary SerDes registers
+ */
+#define BCM5482_SSD_1000BX_CTL 0x00 /* 1000BASE-X Control */
+#define BCM5482_SSD_1000BX_CTL_PWRDOWN 0x0800 /* Power-down SSD */
+#define BCM5482_SSD_SGMII_SLAVE 0x15 /* SGMII Slave Register */
+#define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */
+#define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */
+
+/*
+ * Device flags for PHYs that can be configured for different operating
+ * modes.
+ */
+#define PHY_BCM_FLAGS_VALID 0x80000000
+#define PHY_BCM_FLAGS_INTF_XAUI 0x00000020
+#define PHY_BCM_FLAGS_INTF_SGMII 0x00000010
+#define PHY_BCM_FLAGS_MODE_1000BX 0x00000002
+#define PHY_BCM_FLAGS_MODE_COPPER 0x00000001
+
MODULE_DESCRIPTION("Broadcom PHY driver");
MODULE_AUTHOR("Maciej W. Rozycki");
MODULE_LICENSE("GPL");
+/*
+ * Indirect register access functions for the 1000BASE-T/100BASE-TX/10BASE-T
+ * 0x1c shadow registers.
+ */
+static int bcm54xx_shadow_read(struct phy_device *phydev, u16 shadow)
+{
+ phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
+ return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
+}
+
+static int bcm54xx_shadow_write(struct phy_device *phydev, u16 shadow, u16 val)
+{
+ return phy_write(phydev, MII_BCM54XX_SHD,
+ MII_BCM54XX_SHD_WRITE |
+ MII_BCM54XX_SHD_VAL(shadow) |
+ MII_BCM54XX_SHD_DATA(val));
+}
+
+/*
+ * Indirect register access functions for the Expansion Registers
+ * and Secondary SerDes registers (when sec_serdes=1).
+ */
+static int bcm54xx_exp_read(struct phy_device *phydev,
+ int sec_serdes, u8 regnum)
+{
+ int val;
+
+ phy_write(phydev, MII_BCM54XX_EXP_SEL,
+ (sec_serdes ? MII_BCM54XX_EXP_SEL_SSD :
+ MII_BCM54XX_EXP_SEL_ER) |
+ regnum);
+ val = phy_read(phydev, MII_BCM54XX_EXP_DATA);
+ phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum);
+
+ return val;
+}
+
+static int bcm54xx_exp_write(struct phy_device *phydev,
+ int sec_serdes, u8 regnum, u16 val)
+{
+ int ret;
+
+ phy_write(phydev, MII_BCM54XX_EXP_SEL,
+ (sec_serdes ? MII_BCM54XX_EXP_SEL_SSD :
+ MII_BCM54XX_EXP_SEL_ER) |
+ regnum);
+ ret = phy_write(phydev, MII_BCM54XX_EXP_DATA, val);
+ phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum);
+
+ return ret;
+}
+
static int bcm54xx_config_init(struct phy_device *phydev)
{
int reg, err;
@@ -70,6 +186,87 @@ static int bcm54xx_config_init(struct phy_device *phydev)
return 0;
}
+static int bcm5482_config_init(struct phy_device *phydev)
+{
+ int err, reg;
+
+ err = bcm54xx_config_init(phydev);
+
+ if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) {
+ /*
+ * Enable secondary SerDes and its use as an LED source
+ */
+ reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_SSD);
+ bcm54xx_shadow_write(phydev, BCM5482_SHD_SSD,
+ reg |
+ BCM5482_SHD_SSD_LEDM |
+ BCM5482_SHD_SSD_EN);
+
+ /*
+ * Enable SGMII slave mode and auto-detection
+ */
+ reg = bcm54xx_exp_read(phydev, 1, BCM5482_SSD_SGMII_SLAVE);
+ bcm54xx_exp_write(phydev, 1, BCM5482_SSD_SGMII_SLAVE,
+ reg |
+ BCM5482_SSD_SGMII_SLAVE_EN |
+ BCM5482_SSD_SGMII_SLAVE_AD);
+
+ /*
+ * Disable secondary SerDes powerdown
+ */
+ reg = bcm54xx_exp_read(phydev, 1, BCM5482_SSD_1000BX_CTL);
+ bcm54xx_exp_write(phydev, 1, BCM5482_SSD_1000BX_CTL,
+ reg & ~BCM5482_SSD_1000BX_CTL_PWRDOWN);
+
+ /*
+ * Select 1000BASE-X register set (primary SerDes)
+ */
+ reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_MODE);
+ bcm54xx_shadow_write(phydev, BCM5482_SHD_MODE,
+ reg | BCM5482_SHD_MODE_1000BX);
+
+ /*
+ * LED1=ACTIVITYLED, LED3=LINKSPD[2]
+ * (Use LED1 as secondary SerDes ACTIVITY LED)
+ */
+ bcm54xx_shadow_write(phydev, BCM5482_SHD_LEDS1,
+ BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) |
+ BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD2));
+
+ /*
+ * Auto-negotiation doesn't seem to work quite right
+ * in this mode, so we disable it and force it to the
+ * right speed/duplex setting. Only 'link status'
+ * is important.
+ */
+ phydev->autoneg = AUTONEG_DISABLE;
+ phydev->speed = SPEED_1000;
+ phydev->duplex = DUPLEX_FULL;
+ }
+
+ return err;
+}
+
+static int bcm5482_read_status(struct phy_device *phydev)
+{
+ int err;
+
+ err = genphy_read_status(phydev);
+
+ if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) {
+ /*
+ * Only link status matters for 1000Base-X mode, so force
+ * 1000 Mbit/s full-duplex status
+ */
+ if (phydev->link) {
+ phydev->speed = SPEED_1000;
+ phydev->duplex = DUPLEX_FULL;
+ }
+ }
+
+ return err;
+}
+
static int bcm54xx_ack_interrupt(struct phy_device *phydev)
{
int reg;
@@ -210,9 +407,9 @@ static struct phy_driver bcm5482_driver = {
.name = "Broadcom BCM5482",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
- .config_init = bcm54xx_config_init,
+ .config_init = bcm5482_config_init,
.config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
+ .read_status = bcm5482_read_status,
.ack_interrupt = bcm54xx_ack_interrupt,
.config_intr = bcm54xx_config_intr,
.driver = { .owner = THIS_MODULE },
diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c
index 2747b1f89ffe..c01b78013ddc 100644
--- a/drivers/net/phy/mdio-bitbang.c
+++ b/drivers/net/phy/mdio-bitbang.c
@@ -177,6 +177,7 @@ struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl)
return bus;
}
+EXPORT_SYMBOL(alloc_mdio_bitbang);
void free_mdio_bitbang(struct mii_bus *bus)
{
@@ -185,5 +186,6 @@ void free_mdio_bitbang(struct mii_bus *bus)
module_put(ctrl->ops->owner);
kfree(bus);
}
+EXPORT_SYMBOL(free_mdio_bitbang);
MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/mdio-ofgpio.c b/drivers/net/phy/mdio-ofgpio.c
new file mode 100644
index 000000000000..7edfc0c34835
--- /dev/null
+++ b/drivers/net/phy/mdio-ofgpio.c
@@ -0,0 +1,205 @@
+/*
+ * OpenFirmware GPIO based MDIO bitbang driver.
+ *
+ * Copyright (c) 2008 CSE Semaphore Belgium.
+ * by Laurent Pinchart <laurentp@cse-semaphore.com>
+ *
+ * Based on earlier work by
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/mdio-bitbang.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+
+struct mdio_gpio_info {
+ struct mdiobb_ctrl ctrl;
+ int mdc, mdio;
+};
+
+static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ if (dir)
+ gpio_direction_output(bitbang->mdio, 1);
+ else
+ gpio_direction_input(bitbang->mdio);
+}
+
+static int mdio_read(struct mdiobb_ctrl *ctrl)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ return gpio_get_value(bitbang->mdio);
+}
+
+static void mdio(struct mdiobb_ctrl *ctrl, int what)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ gpio_set_value(bitbang->mdio, what);
+}
+
+static void mdc(struct mdiobb_ctrl *ctrl, int what)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ gpio_set_value(bitbang->mdc, what);
+}
+
+static struct mdiobb_ops mdio_gpio_ops = {
+ .owner = THIS_MODULE,
+ .set_mdc = mdc,
+ .set_mdio_dir = mdio_dir,
+ .set_mdio_data = mdio,
+ .get_mdio_data = mdio_read,
+};
+
+static int __devinit mdio_ofgpio_bitbang_init(struct mii_bus *bus,
+ struct device_node *np)
+{
+ struct mdio_gpio_info *bitbang = bus->priv;
+
+ bitbang->mdc = of_get_gpio(np, 0);
+ bitbang->mdio = of_get_gpio(np, 1);
+
+ if (bitbang->mdc < 0 || bitbang->mdio < 0)
+ return -ENODEV;
+
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%x", bitbang->mdc);
+ return 0;
+}
+
+static void __devinit add_phy(struct mii_bus *bus, struct device_node *np)
+{
+ const u32 *data;
+ int len, id, irq;
+
+ data = of_get_property(np, "reg", &len);
+ if (!data || len != 4)
+ return;
+
+ id = *data;
+ bus->phy_mask &= ~(1 << id);
+
+ irq = of_irq_to_resource(np, 0, NULL);
+ if (irq != NO_IRQ)
+ bus->irq[id] = irq;
+}
+
+static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct device_node *np = NULL;
+ struct mii_bus *new_bus;
+ struct mdio_gpio_info *bitbang;
+ int ret = -ENOMEM;
+ int i;
+
+ bitbang = kzalloc(sizeof(struct mdio_gpio_info), GFP_KERNEL);
+ if (!bitbang)
+ goto out;
+
+ bitbang->ctrl.ops = &mdio_gpio_ops;
+
+ new_bus = alloc_mdio_bitbang(&bitbang->ctrl);
+ if (!new_bus)
+ goto out_free_priv;
+
+ new_bus->name = "GPIO Bitbanged MII",
+
+ ret = mdio_ofgpio_bitbang_init(new_bus, ofdev->node);
+ if (ret)
+ goto out_free_bus;
+
+ new_bus->phy_mask = ~0;
+ new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+ if (!new_bus->irq)
+ goto out_free_bus;
+
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ new_bus->irq[i] = -1;
+
+ while ((np = of_get_next_child(ofdev->node, np)))
+ if (!strcmp(np->type, "ethernet-phy"))
+ add_phy(new_bus, np);
+
+ new_bus->dev = &ofdev->dev;
+ dev_set_drvdata(&ofdev->dev, new_bus);
+
+ ret = mdiobus_register(new_bus);
+ if (ret)
+ goto out_free_irqs;
+
+ return 0;
+
+out_free_irqs:
+ dev_set_drvdata(&ofdev->dev, NULL);
+ kfree(new_bus->irq);
+out_free_bus:
+ kfree(new_bus);
+out_free_priv:
+ free_mdio_bitbang(new_bus);
+out:
+ return ret;
+}
+
+static int mdio_ofgpio_remove(struct of_device *ofdev)
+{
+ struct mii_bus *bus = dev_get_drvdata(&ofdev->dev);
+ struct mdio_gpio_info *bitbang = bus->priv;
+
+ mdiobus_unregister(bus);
+ free_mdio_bitbang(bus);
+ dev_set_drvdata(&ofdev->dev, NULL);
+ kfree(bus->irq);
+ kfree(bitbang);
+ kfree(bus);
+
+ return 0;
+}
+
+static struct of_device_id mdio_ofgpio_match[] = {
+ {
+ .compatible = "virtual,mdio-gpio",
+ },
+ {},
+};
+
+static struct of_platform_driver mdio_ofgpio_driver = {
+ .name = "mdio-gpio",
+ .match_table = mdio_ofgpio_match,
+ .probe = mdio_ofgpio_probe,
+ .remove = mdio_ofgpio_remove,
+};
+
+static int mdio_ofgpio_init(void)
+{
+ return of_register_platform_driver(&mdio_ofgpio_driver);
+}
+
+static void mdio_ofgpio_exit(void)
+{
+ of_unregister_platform_driver(&mdio_ofgpio_driver);
+}
+
+module_init(mdio_ofgpio_init);
+module_exit(mdio_ofgpio_exit);