diff options
Diffstat (limited to 'drivers/net/sb1000.c')
| -rw-r--r-- | drivers/net/sb1000.c | 54 |
1 files changed, 27 insertions, 27 deletions
diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c index 487f9d2ac5b4..829d0ea2709d 100644 --- a/drivers/net/sb1000.c +++ b/drivers/net/sb1000.c @@ -88,31 +88,31 @@ static int sb1000_close(struct net_device *dev); /* SB1000 hardware routines to be used during open/configuration phases */ -static inline int card_wait_for_busy_clear(const int ioaddr[], +static int card_wait_for_busy_clear(const int ioaddr[], const char* name); -static inline int card_wait_for_ready(const int ioaddr[], const char* name, +static int card_wait_for_ready(const int ioaddr[], const char* name, unsigned char in[]); static int card_send_command(const int ioaddr[], const char* name, const unsigned char out[], unsigned char in[]); /* SB1000 hardware routines to be used during frame rx interrupt */ -static inline int sb1000_wait_for_ready(const int ioaddr[], const char* name); -static inline int sb1000_wait_for_ready_clear(const int ioaddr[], +static int sb1000_wait_for_ready(const int ioaddr[], const char* name); +static int sb1000_wait_for_ready_clear(const int ioaddr[], const char* name); -static inline void sb1000_send_command(const int ioaddr[], const char* name, +static void sb1000_send_command(const int ioaddr[], const char* name, const unsigned char out[]); -static inline void sb1000_read_status(const int ioaddr[], unsigned char in[]); -static inline void sb1000_issue_read_command(const int ioaddr[], +static void sb1000_read_status(const int ioaddr[], unsigned char in[]); +static void sb1000_issue_read_command(const int ioaddr[], const char* name); /* SB1000 commands for open/configuration */ -static inline int sb1000_reset(const int ioaddr[], const char* name); -static inline int sb1000_check_CRC(const int ioaddr[], const char* name); +static int sb1000_reset(const int ioaddr[], const char* name); +static int sb1000_check_CRC(const int ioaddr[], const char* name); static inline int sb1000_start_get_set_command(const int ioaddr[], const char* name); -static inline int sb1000_end_get_set_command(const int ioaddr[], +static int sb1000_end_get_set_command(const int ioaddr[], const char* name); -static inline int sb1000_activate(const int ioaddr[], const char* name); +static int sb1000_activate(const int ioaddr[], const char* name); static int sb1000_get_firmware_version(const int ioaddr[], const char* name, unsigned char version[], int do_end); static int sb1000_get_frequency(const int ioaddr[], const char* name, @@ -125,8 +125,8 @@ static int sb1000_set_PIDs(const int ioaddr[], const char* name, const short PID[]); /* SB1000 commands for frame rx interrupt */ -static inline int sb1000_rx(struct net_device *dev); -static inline void sb1000_error_dpc(struct net_device *dev); +static int sb1000_rx(struct net_device *dev); +static void sb1000_error_dpc(struct net_device *dev); static const struct pnp_device_id sb1000_pnp_ids[] = { { "GIC1000", 0 }, @@ -250,7 +250,7 @@ static struct pnp_driver sb1000_driver = { static const int TimeOutJiffies = (875 * HZ) / 100; /* Card Wait For Busy Clear (cannot be used during an interrupt) */ -static inline int +static int card_wait_for_busy_clear(const int ioaddr[], const char* name) { unsigned char a; @@ -274,7 +274,7 @@ card_wait_for_busy_clear(const int ioaddr[], const char* name) } /* Card Wait For Ready (cannot be used during an interrupt) */ -static inline int +static int card_wait_for_ready(const int ioaddr[], const char* name, unsigned char in[]) { unsigned char a; @@ -354,7 +354,7 @@ card_send_command(const int ioaddr[], const char* name, static const int Sb1000TimeOutJiffies = 7 * HZ; /* Card Wait For Ready (to be used during frame rx) */ -static inline int +static int sb1000_wait_for_ready(const int ioaddr[], const char* name) { unsigned long timeout; @@ -380,7 +380,7 @@ sb1000_wait_for_ready(const int ioaddr[], const char* name) } /* Card Wait For Ready Clear (to be used during frame rx) */ -static inline int +static int sb1000_wait_for_ready_clear(const int ioaddr[], const char* name) { unsigned long timeout; @@ -405,7 +405,7 @@ sb1000_wait_for_ready_clear(const int ioaddr[], const char* name) } /* Card Send Command (to be used during frame rx) */ -static inline void +static void sb1000_send_command(const int ioaddr[], const char* name, const unsigned char out[]) { @@ -422,7 +422,7 @@ sb1000_send_command(const int ioaddr[], const char* name, } /* Card Read Status (to be used during frame rx) */ -static inline void +static void sb1000_read_status(const int ioaddr[], unsigned char in[]) { in[1] = inb(ioaddr[0] + 1); @@ -434,7 +434,7 @@ sb1000_read_status(const int ioaddr[], unsigned char in[]) } /* Issue Read Command (to be used during frame rx) */ -static inline void +static void sb1000_issue_read_command(const int ioaddr[], const char* name) { const unsigned char Command0[6] = {0x20, 0x00, 0x00, 0x01, 0x00, 0x00}; @@ -450,7 +450,7 @@ sb1000_issue_read_command(const int ioaddr[], const char* name) * SB1000 commands for open/configuration */ /* reset SB1000 card */ -static inline int +static int sb1000_reset(const int ioaddr[], const char* name) { unsigned char st[7]; @@ -479,7 +479,7 @@ sb1000_reset(const int ioaddr[], const char* name) } /* check SB1000 firmware CRC */ -static inline int +static int sb1000_check_CRC(const int ioaddr[], const char* name) { unsigned char st[7]; @@ -504,7 +504,7 @@ sb1000_start_get_set_command(const int ioaddr[], const char* name) return card_send_command(ioaddr, name, Command0, st); } -static inline int +static int sb1000_end_get_set_command(const int ioaddr[], const char* name) { unsigned char st[7]; @@ -517,7 +517,7 @@ sb1000_end_get_set_command(const int ioaddr[], const char* name) return card_send_command(ioaddr, name, Command1, st); } -static inline int +static int sb1000_activate(const int ioaddr[], const char* name) { unsigned char st[7]; @@ -694,7 +694,7 @@ sb1000_set_PIDs(const int ioaddr[], const char* name, const short PID[]) } -static inline void +static void sb1000_print_status_buffer(const char* name, unsigned char st[], unsigned char buffer[], int size) { @@ -725,7 +725,7 @@ sb1000_print_status_buffer(const char* name, unsigned char st[], /* receive a single frame and assemble datagram * (this is the heart of the interrupt routine) */ -static inline int +static int sb1000_rx(struct net_device *dev) { @@ -888,7 +888,7 @@ dropped_frame: return -1; } -static inline void +static void sb1000_error_dpc(struct net_device *dev) { char *name; |