diff options
Diffstat (limited to 'drivers/net/spider_net.c')
| -rw-r--r-- | drivers/net/spider_net.c | 2334 |
1 files changed, 2334 insertions, 0 deletions
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c new file mode 100644 index 000000000000..4e19220473d0 --- /dev/null +++ b/drivers/net/spider_net.c @@ -0,0 +1,2334 @@ +/* + * Network device driver for Cell Processor-Based Blade + * + * (C) Copyright IBM Corp. 2005 + * + * Authors : Utz Bacher <utz.bacher@de.ibm.com> + * Jens Osterkamp <Jens.Osterkamp@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> + +#include <linux/compiler.h> +#include <linux/crc32.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/firmware.h> +#include <linux/if_vlan.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/ip.h> +#include <linux/kernel.h> +#include <linux/mii.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/device.h> +#include <linux/pci.h> +#include <linux/skbuff.h> +#include <linux/slab.h> +#include <linux/tcp.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <linux/workqueue.h> +#include <asm/bitops.h> +#include <asm/pci-bridge.h> +#include <net/checksum.h> + +#include "spider_net.h" + +MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \ + "<Jens.Osterkamp@de.ibm.com>"); +MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver"); +MODULE_LICENSE("GPL"); + +static int rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_DEFAULT; +static int tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_DEFAULT; + +module_param(rx_descriptors, int, 0644); +module_param(tx_descriptors, int, 0644); + +MODULE_PARM_DESC(rx_descriptors, "number of descriptors used " \ + "in rx chains"); +MODULE_PARM_DESC(tx_descriptors, "number of descriptors used " \ + "in tx chain"); + +char spider_net_driver_name[] = "spidernet"; + +static struct pci_device_id spider_net_pci_tbl[] = { + { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, spider_net_pci_tbl); + +/** + * spider_net_read_reg - reads an SMMIO register of a card + * @card: device structure + * @reg: register to read from + * + * returns the content of the specified SMMIO register. + */ +static u32 +spider_net_read_reg(struct spider_net_card *card, u32 reg) +{ + u32 value; + + value = readl(card->regs + reg); + value = le32_to_cpu(value); + + return value; +} + +/** + * spider_net_write_reg - writes to an SMMIO register of a card + * @card: device structure + * @reg: register to write to + * @value: value to write into the specified SMMIO register + */ +static void +spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value) +{ + value = cpu_to_le32(value); + writel(value, card->regs + reg); +} + +/** + * spider_net_write_reg_sync - writes to an SMMIO register of a card + * @card: device structure + * @reg: register to write to + * @value: value to write into the specified SMMIO register + * + * Unlike spider_net_write_reg, this will also make sure the + * data arrives on the card by reading the reg again. + */ +static void +spider_net_write_reg_sync(struct spider_net_card *card, u32 reg, u32 value) +{ + value = cpu_to_le32(value); + writel(value, card->regs + reg); + (void)readl(card->regs + reg); +} + +/** + * spider_net_rx_irq_off - switch off rx irq on this spider card + * @card: device structure + * + * switches off rx irq by masking them out in the GHIINTnMSK register + */ +static void +spider_net_rx_irq_off(struct spider_net_card *card) +{ + u32 regvalue; + unsigned long flags; + + spin_lock_irqsave(&card->intmask_lock, flags); + regvalue = spider_net_read_reg(card, SPIDER_NET_GHIINT0MSK); + regvalue &= ~SPIDER_NET_RXINT; + spider_net_write_reg_sync(card, SPIDER_NET_GHIINT0MSK, regvalue); + spin_unlock_irqrestore(&card->intmask_lock, flags); +} + +/** spider_net_write_phy - write to phy register + * @netdev: adapter to be written to + * @mii_id: id of MII + * @reg: PHY register + * @val: value to be written to phy register + * + * spider_net_write_phy_register writes to an arbitrary PHY + * register via the spider GPCWOPCMD register. We assume the queue does + * not run full (not more than 15 commands outstanding). + **/ +static void +spider_net_write_phy(struct net_device *netdev, int mii_id, + int reg, int val) +{ + struct spider_net_card *card = netdev_priv(netdev); + u32 writevalue; + + writevalue = ((u32)mii_id << 21) | + ((u32)reg << 16) | ((u32)val); + + spider_net_write_reg(card, SPIDER_NET_GPCWOPCMD, writevalue); +} + +/** spider_net_read_phy - read from phy register + * @netdev: network device to be read from + * @mii_id: id of MII + * @reg: PHY register + * + * Returns value read from PHY register + * + * spider_net_write_phy reads from an arbitrary PHY + * register via the spider GPCROPCMD register + **/ +static int +spider_net_read_phy(struct net_device *netdev, int mii_id, int reg) +{ + struct spider_net_card *card = netdev_priv(netdev); + u32 readvalue; + + readvalue = ((u32)mii_id << 21) | ((u32)reg << 16); + spider_net_write_reg(card, SPIDER_NET_GPCROPCMD, readvalue); + + /* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT + * interrupt, as we poll for the completion of the read operation + * in spider_net_read_phy. Should take about 50 us */ + do { + readvalue = spider_net_read_reg(card, SPIDER_NET_GPCROPCMD); + } while (readvalue & SPIDER_NET_GPREXEC); + + readvalue &= SPIDER_NET_GPRDAT_MASK; + + return readvalue; +} + +/** + * spider_net_rx_irq_on - switch on rx irq on this spider card + * @card: device structure + * + * switches on rx irq by enabling them in the GHIINTnMSK register + */ +static void +spider_net_rx_irq_on(struct spider_net_card *card) +{ + u32 regvalue; + unsigned long flags; + + spin_lock_irqsave(&card->intmask_lock, flags); + regvalue = spider_net_read_reg(card, SPIDER_NET_GHIINT0MSK); + regvalue |= SPIDER_NET_RXINT; + spider_net_write_reg_sync(card, SPIDER_NET_GHIINT0MSK, regvalue); + spin_unlock_irqrestore(&card->intmask_lock, flags); +} + +/** + * spider_net_tx_irq_off - switch off tx irq on this spider card + * @card: device structure + * + * switches off tx irq by masking them out in the GHIINTnMSK register + */ +static void +spider_net_tx_irq_off(struct spider_net_card *card) +{ + u32 regvalue; + unsigned long flags; + + spin_lock_irqsave(&card->intmask_lock, flags); + regvalue = spider_net_read_reg(card, SPIDER_NET_GHIINT0MSK); + regvalue &= ~SPIDER_NET_TXINT; + spider_net_write_reg_sync(card, SPIDER_NET_GHIINT0MSK, regvalue); + spin_unlock_irqrestore(&card->intmask_lock, flags); +} + +/** + * spider_net_tx_irq_on - switch on tx irq on this spider card + * @card: device structure + * + * switches on tx irq by enabling them in the GHIINTnMSK register + */ +static void +spider_net_tx_irq_on(struct spider_net_card *card) +{ + u32 regvalue; + unsigned long flags; + + spin_lock_irqsave(&card->intmask_lock, flags); + regvalue = spider_net_read_reg(card, SPIDER_NET_GHIINT0MSK); + regvalue |= SPIDER_NET_TXINT; + spider_net_write_reg_sync(card, SPIDER_NET_GHIINT0MSK, regvalue); + spin_unlock_irqrestore(&card->intmask_lock, flags); +} + +/** + * spider_net_set_promisc - sets the unicast address or the promiscuous mode + * @card: card structure + * + * spider_net_set_promisc sets the unicast destination address filter and + * thus either allows for non-promisc mode or promisc mode + */ +static void +spider_net_set_promisc(struct spider_net_card *card) +{ + u32 macu, macl; + struct net_device *netdev = card->netdev; + + if (netdev->flags & IFF_PROMISC) { + /* clear destination entry 0 */ + spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, 0); + spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, 0); + spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, + SPIDER_NET_PROMISC_VALUE); + } else { + macu = netdev->dev_addr[0]; + macu <<= 8; + macu |= netdev->dev_addr[1]; + memcpy(&macl, &netdev->dev_addr[2], sizeof(macl)); + + macu |= SPIDER_NET_UA_DESCR_VALUE; + spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, macu); + spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, macl); + spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, + SPIDER_NET_NONPROMISC_VALUE); + } +} + +/** + * spider_net_get_mac_address - read mac address from spider card + * @card: device structure + * + * reads MAC address from GMACUNIMACU and GMACUNIMACL registers + */ +static int +spider_net_get_mac_address(struct net_device *netdev) +{ + struct spider_net_card *card = netdev_priv(netdev); + u32 macl, macu; + + macl = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACL); + macu = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACU); + + netdev->dev_addr[0] = (macu >> 24) & 0xff; + netdev->dev_addr[1] = (macu >> 16) & 0xff; + netdev->dev_addr[2] = (macu >> 8) & 0xff; + netdev->dev_addr[3] = macu & 0xff; + netdev->dev_addr[4] = (macl >> 8) & 0xff; + netdev->dev_addr[5] = macl & 0xff; + + if (!is_valid_ether_addr(&netdev->dev_addr[0])) + return -EINVAL; + + return 0; +} + +/** + * spider_net_get_descr_status -- returns the status of a descriptor + * @descr: descriptor to look at + * + * returns the status as in the dmac_cmd_status field of the descriptor + */ +static enum spider_net_descr_status +spider_net_get_descr_status(struct spider_net_descr *descr) +{ + u32 cmd_status; + rmb(); + cmd_status = descr->dmac_cmd_status; + rmb(); + cmd_status >>= SPIDER_NET_DESCR_IND_PROC_SHIFT; + /* no need to mask out any bits, as cmd_status is 32 bits wide only + * (and unsigned) */ + return cmd_status; +} + +/** + * spider_net_set_descr_status -- sets the status of a descriptor + * @descr: descriptor to change + * @status: status to set in the descriptor + * + * changes the status to the specified value. Doesn't change other bits + * in the status + */ +static void +spider_net_set_descr_status(struct spider_net_descr *descr, + enum spider_net_descr_status status) +{ + u32 cmd_status; + /* read the status */ + mb(); + cmd_status = descr->dmac_cmd_status; + /* clean the upper 4 bits */ + cmd_status &= SPIDER_NET_DESCR_IND_PROC_MASKO; + /* add the status to it */ + cmd_status |= ((u32)status)<<SPIDER_NET_DESCR_IND_PROC_SHIFT; + /* and write it back */ + descr->dmac_cmd_status = cmd_status; + wmb(); +} + +/** + * spider_net_free_chain - free descriptor chain + * @card: card structure + * @chain: address of chain + * + */ +static void +spider_net_free_chain(struct spider_net_card *card, + struct spider_net_descr_chain *chain) +{ + struct spider_net_descr *descr; + + for (descr = chain->tail; !descr->bus_addr; descr = descr->next) { + pci_unmap_single(card->pdev, descr->bus_addr, + SPIDER_NET_DESCR_SIZE, PCI_DMA_BIDIRECTIONAL); + descr->bus_addr = 0; + } +} + +/** + * spider_net_init_chain - links descriptor chain + * @card: card structure + * @chain: address of chain + * @start_descr: address of descriptor array + * @no: number of descriptors + * + * we manage a circular list that mirrors the hardware structure, + * except that the hardware uses bus addresses. + * + * returns 0 on success, <0 on failure + */ +static int +spider_net_init_chain(struct spider_net_card *card, + struct spider_net_descr_chain *chain, + struct spider_net_descr *start_descr, int no) +{ + int i; + struct spider_net_descr *descr; + + spin_lock_init(&card->chain_lock); + + descr = start_descr; + memset(descr, 0, sizeof(*descr) * no); + + /* set up the hardware pointers in each descriptor */ + for (i=0; i<no; i++, descr++) { + spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE); + + descr->bus_addr = + pci_map_single(card->pdev, descr, + SPIDER_NET_DESCR_SIZE, + PCI_DMA_BIDIRECTIONAL); + + if (descr->bus_addr == DMA_ERROR_CODE) + goto iommu_error; + + descr->next = descr + 1; + descr->prev = descr - 1; + + } + /* do actual circular list */ + (descr-1)->next = start_descr; + start_descr->prev = descr-1; + + descr = start_descr; + for (i=0; i < no; i++, descr++) { + descr->next_descr_addr = descr->next->bus_addr; + } + + chain->head = start_descr; + chain->tail = start_descr; + + return 0; + +iommu_error: + descr = start_descr; + for (i=0; i < no; i++, descr++) + if (descr->bus_addr) + pci_unmap_single(card->pdev, descr->bus_addr, + SPIDER_NET_DESCR_SIZE, PCI_DMA_BIDIRECTIONAL); + return -ENOMEM; +} + +/** + * spider_net_free_rx_chain_contents - frees descr contents in rx chain + * @card: card structure + * + * returns 0 on success, <0 on failure + */ +static void +spider_net_free_rx_chain_contents(struct spider_net_card *card) +{ + struct spider_net_descr *descr; + + descr = card->rx_chain.head; + while (descr->next != card->rx_chain.head) { + if (descr->skb) { + dev_kfree_skb(descr->skb); + pci_unmap_single(card->pdev, descr->buf_addr, + SPIDER_NET_MAX_MTU, + PCI_DMA_BIDIRECTIONAL); + } + descr = descr->next; + } +} + +/** + * spider_net_prepare_rx_descr - reinitializes a rx descriptor + * @card: card structure + * @descr: descriptor to re-init + * + * return 0 on succes, <0 on failure + * + * allocates a new rx skb, iommu-maps it and attaches it to the descriptor. + * Activate the descriptor state-wise + */ +static int +spider_net_prepare_rx_descr(struct spider_net_card *card, + struct spider_net_descr *descr) +{ + int error = 0; + int offset; + int bufsize; + + /* we need to round up the buffer size to a multiple of 128 */ + bufsize = (SPIDER_NET_MAX_MTU + SPIDER_NET_RXBUF_ALIGN - 1) & + (~(SPIDER_NET_RXBUF_ALIGN - 1)); + + /* and we need to have it 128 byte aligned, therefore we allocate a + * bit more */ + /* allocate an skb */ + descr->skb = dev_alloc_skb(bufsize + SPIDER_NET_RXBUF_ALIGN - 1); + if (!descr->skb) { + if (net_ratelimit()) + if (netif_msg_rx_err(card)) + pr_err("Not enough memory to allocate " + "rx buffer\n"); + return -ENOMEM; + } + descr->buf_size = bufsize; + descr->result_size = 0; + descr->valid_size = 0; + descr->data_status = 0; + descr->data_error = 0; + + offset = ((unsigned long)descr->skb->data) & + (SPIDER_NET_RXBUF_ALIGN - 1); + if (offset) + skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset); + /* io-mmu-map the skb */ + descr->buf_addr = pci_map_single(card->pdev, descr->skb->data, + SPIDER_NET_MAX_MTU, + PCI_DMA_BIDIRECTIONAL); + if (descr->buf_addr == DMA_ERROR_CODE) { + dev_kfree_skb_any(descr->skb); + if (netif_msg_rx_err(card)) + pr_err("Could not iommu-map rx buffer\n"); + spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE); + } else { + descr->dmac_cmd_status = SPIDER_NET_DMAC_RX_CARDOWNED; + } + + return error; +} + +/** + * spider_net_enable_rxctails - sets RX dmac chain tail addresses + * @card: card structure + * + * spider_net_enable_rxctails sets the RX DMAC chain tail adresses in the + * chip by writing to the appropriate register. DMA is enabled in + * spider_net_enable_rxdmac. + */ +static void +spider_net_enable_rxchtails(struct spider_net_card *card) +{ + /* assume chain is aligned correctly */ + spider_net_write_reg(card, SPIDER_NET_GDADCHA , + card->rx_chain.tail->bus_addr); +} + +/** + * spider_net_enable_rxdmac - enables a receive DMA controller + * @card: card structure + * + * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN + * in the GDADMACCNTR register + */ +static void +spider_net_enable_rxdmac(struct spider_net_card *card) +{ + spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR, + SPIDER_NET_DMA_RX_VALUE); +} + +/** + * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains + * @card: card structure + * + * refills descriptors in all chains (last used chain first): allocates skbs + * and iommu-maps them. + */ +static void +spider_net_refill_rx_chain(struct spider_net_card *card) +{ + struct spider_net_descr_chain *chain; + int count = 0; + unsigned long flags; + + chain = &card->rx_chain; + + spin_lock_irqsave(&card->chain_lock, flags); + while (spider_net_get_descr_status(chain->head) == + SPIDER_NET_DESCR_NOT_IN_USE) { + if (spider_net_prepare_rx_descr(card, chain->head)) + break; + count++; + chain->head = chain->head->next; + } + spin_unlock_irqrestore(&card->chain_lock, flags); + + /* could be optimized, only do that, if we know the DMA processing + * has terminated */ + if (count) + spider_net_enable_rxdmac(card); +} + +/** + * spider_net_alloc_rx_skbs - allocates rx skbs in rx descriptor chains + * @card: card structure + * + * returns 0 on success, <0 on failure + */ +static int +spider_net_alloc_rx_skbs(struct spider_net_card *card) +{ + int result; + struct spider_net_descr_chain *chain; + + result = -ENOMEM; + + chain = &card->rx_chain; + /* put at least one buffer into the chain. if this fails, + * we've got a problem. if not, spider_net_refill_rx_chain + * will do the rest at the end of this function */ + if (spider_net_prepare_rx_descr(card, chain->head)) + goto error; + else + chain->head = chain->head->next; + + /* this will allocate the rest of the rx buffers; if not, it's + * business as usual later on */ + spider_net_refill_rx_chain(card); + return 0; + +error: + spider_net_free_rx_chain_contents(card); + return result; +} + +/** + * spider_net_release_tx_descr - processes a used tx descriptor + * @card: card structure + * @descr: descriptor to release + * + * releases a used tx descriptor (unmapping, freeing of skb) + */ +static void +spider_net_release_tx_descr(struct spider_net_card *card, + struct spider_net_descr *descr) +{ + struct sk_buff *skb; + + /* unmap the skb */ + skb = descr->skb; + pci_unmap_single(card->pdev, descr->buf_addr, skb->len, + PCI_DMA_BIDIRECTIONAL); + + dev_kfree_skb_any(skb); + + /* set status to not used */ + spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE); +} + +/** + * spider_net_release_tx_chain - processes sent tx descriptors + * @card: adapter structure + * @brutal: if set, don't care about whether descriptor seems to be in use + * + * releases the tx descriptors that spider has finished with (if non-brutal) + * or simply release tx descriptors (if brutal) + */ +static void +spider_net_release_tx_chain(struct spider_net_card *card, int brutal) +{ + struct spider_net_descr_chain *tx_chain = &card->tx_chain; + enum spider_net_descr_status status; + + spider_net_tx_irq_off(card); + + /* no lock for chain needed, if this is only executed once at a time */ +again: + for (;;) { + status = spider_net_get_descr_status(tx_chain->tail); + switch (status) { + case SPIDER_NET_DESCR_CARDOWNED: + if (!brutal) goto out; + /* fallthrough, if we release the descriptors + * brutally (then we don't care about + * SPIDER_NET_DESCR_CARDOWNED) */ + case SPIDER_NET_DESCR_RESPONSE_ERROR: + case SPIDER_NET_DESCR_PROTECTION_ERROR: + case SPIDER_NET_DESCR_FORCE_END: + if (netif_msg_tx_err(card)) + pr_err("%s: forcing end of tx descriptor " + "with status x%02x\n", + card->netdev->name, status); + card->netdev_stats.tx_dropped++; + break; + + case SPIDER_NET_DESCR_COMPLETE: + card->netdev_stats.tx_packets++; + card->netdev_stats.tx_bytes += + tx_chain->tail->skb->len; + break; + + default: /* any other value (== SPIDER_NET_DESCR_NOT_IN_USE) */ + goto out; + } + spider_net_release_tx_descr(card, tx_chain->tail); + tx_chain->tail = tx_chain->tail->next; + } +out: + netif_wake_queue(card->netdev); + + if (!brutal) { + /* switch on tx irqs (while we are still in the interrupt + * handler, so we don't get an interrupt), check again + * for done descriptors. This results in fewer interrupts */ + spider_net_tx_irq_on(card); + status = spider_net_get_descr_status(tx_chain->tail); + switch (status) { + case SPIDER_NET_DESCR_RESPONSE_ERROR: + case SPIDER_NET_DESCR_PROTECTION_ERROR: + case SPIDER_NET_DESCR_FORCE_END: + case SPIDER_NET_DESCR_COMPLETE: + goto again; + default: + break; + } + } + +} + +/** + * spider_net_get_multicast_hash - generates hash for multicast filter table + * @addr: multicast address + * + * returns the hash value. + * + * spider_net_get_multicast_hash calculates a hash value for a given multicast + * address, that is used to set the multicast filter tables + */ +static u8 +spider_net_get_multicast_hash(struct net_device *netdev, __u8 *addr) +{ + /* FIXME: an addr of 01:00:5e:00:00:01 must result in 0xa9, + * ff:ff:ff:ff:ff:ff must result in 0xfd */ + u32 crc; + u8 hash; + + crc = crc32_be(~0, addr, netdev->addr_len); + + hash = (crc >> 27); + hash <<= 3; + hash |= crc & 7; + + return hash; +} + +/** + * spider_net_set_multi - sets multicast addresses and promisc flags + * @netdev: interface device structure + * + * spider_net_set_multi configures multicast addresses as needed for the + * netdev interface. It also sets up multicast, allmulti and promisc + * flags appropriately + */ +static void +spider_net_set_multi(struct net_device *netdev) +{ + struct dev_mc_list *mc; + u8 hash; + int i; + u32 reg; + struct spider_net_card *card = netdev_priv(netdev); + unsigned long bitmask[SPIDER_NET_MULTICAST_HASHES / BITS_PER_LONG] = + {0, }; + + spider_net_set_promisc(card); + + if (netdev->flags & IFF_ALLMULTI) { + for (i = 0; i < SPIDER_NET_MULTICAST_HASHES; i++) { + set_bit(i, bitmask); + } + goto write_hash; + } + + /* well, we know, what the broadcast hash value is: it's xfd + hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */ + set_bit(0xfd, bitmask); + + for (mc = netdev->mc_list; mc; mc = mc->next) { + hash = spider_net_get_multicast_hash(netdev, mc->dmi_addr); + set_bit(hash, bitmask); + } + +write_hash: + for (i = 0; i < SPIDER_NET_MULTICAST_HASHES / 4; i++) { + reg = 0; + if (test_bit(i * 4, bitmask)) + reg += 0x08; + reg <<= 8; + if (test_bit(i * 4 + 1, bitmask)) + reg += 0x08; + reg <<= 8; + if (test_bit(i * 4 + 2, bitmask)) + reg += 0x08; + reg <<= 8; + if (test_bit(i * 4 + 3, bitmask)) + reg += 0x08; + + spider_net_write_reg(card, SPIDER_NET_GMRMHFILnR + i * 4, reg); + } +} + +/** + * spider_net_disable_rxdmac - disables the receive DMA controller + * @card: card structure + * + * spider_net_disable_rxdmac terminates processing on the DMA controller by + * turing off DMA and issueing a force end + */ +static void +spider_net_disable_rxdmac(struct spider_net_card *card) +{ + spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR, + SPIDER_NET_DMA_RX_FEND_VALUE); +} + +/** + * spider_net_stop - called upon ifconfig down + * @netdev: interface device structure + * + * always returns 0 + */ +int +spider_net_stop(struct net_device *netdev) +{ + struct spider_net_card *card = netdev_priv(netdev); + + netif_poll_disable(netdev); + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + /* disable/mask all interrupts */ + spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0); + spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0); + spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0); + + /* free_irq(netdev->irq, netdev);*/ + free_irq(to_pci_dev(netdev->class_dev.dev)->irq, netdev); + + spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, + SPIDER_NET_DMA_TX_FEND_VALUE); + + /* turn off DMA, force end */ + spider_net_disable_rxdmac(card); + + /* release chains */ + spider_net_release_tx_chain(card, 1); + + spider_net_free_chain(card, &card->tx_chain); + spider_net_free_chain(card, &card->rx_chain); + + return 0; +} + +/** + * spider_net_get_next_tx_descr - returns the next available tx descriptor + * @card: device structure to get descriptor from + * + * returns the address of the next descriptor, or NULL if not available. + */ +static struct spider_net_descr * +spider_net_get_next_tx_descr(struct spider_net_card *card) +{ + /* check, if head points to not-in-use descr */ + if ( spider_net_get_descr_status(card->tx_chain.head) == + SPIDER_NET_DESCR_NOT_IN_USE ) { + return card->tx_chain.head; + } else { + return NULL; + } +} + +/** + * spider_net_set_txdescr_cmdstat - sets the tx descriptor command field + * @descr: descriptor structure to fill out + * @skb: packet to consider + * + * fills out the command and status field of the descriptor structure, + * depending on hardware checksum settings. This function assumes a wmb() + * has executed before. + */ +static void +spider_net_set_txdescr_cmdstat(struct spider_net_descr *descr, + struct sk_buff *skb) +{ + if (skb->ip_summed != CHECKSUM_HW) { + descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_NOCS; + return; + } + + /* is packet ip? + * if yes: tcp? udp? */ + if (skb->protocol == htons(ETH_P_IP)) { + if (skb->nh.iph->protocol == IPPROTO_TCP) { + descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_TCPCS; + } else if (skb->nh.iph->protocol == IPPROTO_UDP) { + descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_UDPCS; + } else { /* the stack should checksum non-tcp and non-udp + packets on his own: NETIF_F_IP_CSUM */ + descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_NOCS; + } + } +} + +/** + * spider_net_prepare_tx_descr - fill tx descriptor with skb data + * @card: card structure + * @descr: descriptor structure to fill out + * @skb: packet to use + * + * returns 0 on success, <0 on failure. + * + * fills out the descriptor structure with skb data and len. Copies data, + * if needed (32bit DMA!) + */ +static int +spider_net_prepare_tx_descr(struct spider_net_card *card, + struct spider_net_descr *descr, + struct sk_buff *skb) +{ + descr->buf_addr = pci_map_single(card->pdev, skb->data, + skb->len, PCI_DMA_BIDIRECTIONAL); + if (descr->buf_addr == DMA_ERROR_CODE) { + if (netif_msg_tx_err(card)) + pr_err("could not iommu-map packet (%p, %i). " + "Dropping packet\n", skb->data, skb->len); + return -ENOMEM; + } + + descr->buf_size = skb->len; + descr->skb = skb; + descr->data_status = 0; + + /* make sure the above values are in memory before we change the + * status */ + wmb(); + + spider_net_set_txdescr_cmdstat(descr,skb); + + return 0; +} + +/** + * spider_net_kick_tx_dma - enables TX DMA processing + * @card: card structure + * @descr: descriptor address to enable TX processing at + * + * spider_net_kick_tx_dma writes the current tx chain head as start address + * of the tx descriptor chain and enables the transmission DMA engine + */ +static void +spider_net_kick_tx_dma(struct spider_net_card *card, + struct spider_net_descr *descr) +{ + /* this is the only descriptor in the output chain. + * Enable TX DMA */ + + spider_net_write_reg(card, SPIDER_NET_GDTDCHA, + descr->bus_addr); + + spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, + SPIDER_NET_DMA_TX_VALUE); +} + +/** + * spider_net_xmit - transmits a frame over the device + * @skb: packet to send out + * @netdev: interface device structure + * + * returns 0 on success, <0 on failure + */ +static int +spider_net_xmit(struct sk_buff *skb, struct net_device *netdev) +{ + struct spider_net_card *card = netdev_priv(netdev); + struct spider_net_descr *descr; + int result; + + descr = spider_net_get_next_tx_descr(card); + + if (!descr) { + netif_stop_queue(netdev); + + descr = spider_net_get_next_tx_descr(card); + if (!descr) + goto error; + else + netif_start_queue(netdev); + } + + result = spider_net_prepare_tx_descr(card, descr, skb); + if (result) + goto error; + + card->tx_chain.head = card->tx_chain.head->next; + + /* make sure the status from spider_net_prepare_tx_descr is in + * memory before we check out the previous descriptor */ + wmb(); + + if (spider_net_get_descr_status(descr->prev) != + SPIDER_NET_DESCR_CARDOWNED) + spider_net_kick_tx_dma(card, descr); + + return NETDEV_TX_OK; + +error: + card->netdev_stats.tx_dropped++; + return NETDEV_TX_LOCKED; +} + +/** + * spider_net_do_ioctl - called for device ioctls + * @netdev: interface device structure + * @ifr: request parameter structure for ioctl + * @cmd: command code for ioctl + * + * returns 0 on success, <0 on failure. Currently, we have no special ioctls. + * -EOPNOTSUPP is returned, if an unknown ioctl was requested + */ +static int +spider_net_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { + default: + return -EOPNOTSUPP; + } +} + +/** + * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on + * @descr: descriptor to process + * @card: card structure + * + * returns 1 on success, 0 if no packet was passed to the stack + * + * iommu-unmaps the skb, fills out skb structure and passes the data to the + * stack. The descriptor state is not changed. + */ +static int +spider_net_pass_skb_up(struct spider_net_descr *descr, + struct spider_net_card *card) +{ + struct sk_buff *skb; + struct net_device *netdev; + u32 data_status, data_error; + + data_status = descr->data_status; + data_error = descr->data_error; + + netdev = card->netdev; + + /* check for errors in the data_error flag */ + if ((data_error & SPIDER_NET_DATA_ERROR_MASK) && + netif_msg_rx_err(card)) + pr_err("error in received descriptor found, " + "data_status=x%08x, data_error=x%08x\n", + data_status, data_error); + + /* prepare skb, unmap descriptor */ + skb = descr->skb; + pci_unmap_single(card->pdev, descr->buf_addr, SPIDER_NET_MAX_MTU, + PCI_DMA_BIDIRECTIONAL); + + /* the cases we'll throw away the packet immediately */ + if (data_error & SPIDER_NET_DESTROY_RX_FLAGS) + return 0; + + skb->dev = netdev; + skb_put(skb, descr->valid_size); + + /* the card seems to add 2 bytes of junk in front + * of the ethernet frame */ +#define SPIDER_MISALIGN 2 + skb_pull(skb, SPIDER_MISALIGN); + skb->protocol = eth_type_trans(skb, netdev); + + /* checksum offload */ + if (card->options.rx_csum) { + if ( (data_status & SPIDER_NET_DATA_STATUS_CHK_MASK) && + (!(data_error & SPIDER_NET_DATA_ERROR_CHK_MASK)) ) + skb->ip_summed = CHECKSUM_UNNECESSARY; + else + skb->ip_summed = CHECKSUM_NONE; + } else { + skb->ip_summed = CHECKSUM_NONE; + } + + if (data_status & SPIDER_NET_VLAN_PACKET) { + /* further enhancements: HW-accel VLAN + * vlan_hwaccel_receive_skb + */ + } + + /* pass skb up to stack */ + netif_receive_skb(skb); + + /* update netdevice statistics */ + card->netdev_stats.rx_packets++; + card->netdev_stats.rx_bytes += skb->len; + + return 1; +} + +/** + * spider_net_decode_descr - processes an rx descriptor + * @card: card structure + * + * returns 1 if a packet has been sent to the stack, otherwise 0 + * + * processes an rx descriptor by iommu-unmapping the data buffer and passing + * the packet up to the stack + */ +static int +spider_net_decode_one_descr(struct spider_net_card *card) +{ + enum spider_net_descr_status status; + struct spider_net_descr *descr; + struct spider_net_descr_chain *chain; + int result; + + chain = &card->rx_chain; + descr = chain->tail; + + status = spider_net_get_descr_status(descr); + + if (status == SPIDER_NET_DESCR_CARDOWNED) { + /* nothing in the descriptor yet */ + return 0; + } + + if (status == SPIDER_NET_DESCR_NOT_IN_USE) { + /* not initialized yet, I bet chain->tail == chain->head + * and the ring is empty */ + spider_net_refill_rx_chain(card); + return 0; + } + + /* descriptor definitively used -- move on head */ + chain->tail = descr->next; + + result = 0; + if ( (status == SPIDER_NET_DESCR_RESPONSE_ERROR) || + (status == SPIDER_NET_DESCR_PROTECTION_ERROR) || + (status == SPIDER_NET_DESCR_FORCE_END) ) { + if (netif_msg_rx_err(card)) + pr_err("%s: dropping RX descriptor with state %d\n", + card->netdev->name, status); + card->netdev_stats.rx_dropped++; + goto refill; + } + + if ( (status != SPIDER_NET_DESCR_COMPLETE) && + (status != SPIDER_NET_DESCR_FRAME_END) ) { + if (netif_msg_rx_err(card)) + pr_err("%s: RX descriptor with state %d\n", + card->netdev->name, status); + goto refill; + } + + /* ok, we've got a packet in descr */ + result = spider_net_pass_skb_up(descr, card); +refill: + spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE); + /* change the descriptor state: */ + spider_net_refill_rx_chain(card); + + return result; +} + +/** + * spider_net_poll - NAPI poll function called by the stack to return packets + * @netdev: interface device structure + * @budget: number of packets we can pass to the stack at most + * + * returns 0 if no more packets available to the driver/stack. Returns 1, + * if the quota is exceeded, but the driver has still packets. + * + * spider_net_poll returns all packets from the rx descriptors to the stack + * (using netif_receive_skb). If all/enough packets are up, the driver + * reenables interrupts and returns 0. If not, 1 is returned. + */ +static int +spider_net_poll(struct net_device *netdev, int *budget) +{ + struct spider_net_card *card = netdev_priv(netdev); + int packets_to_do, packets_done = 0; + int no_more_packets = 0; + + packets_to_do = min(*budget, netdev->quota); + + while (packets_to_do) { + if (spider_net_decode_one_descr(card)) { + packets_done++; + packets_to_do--; + } else { + /* no more packets for the stack */ + no_more_packets = 1; + break; + } + } + + netdev->quota -= packets_done; + *budget -= packets_done; + + /* if all packets are in the stack, enable interrupts and return 0 */ + /* if not, return 1 */ + if (no_more_packets) { + netif_rx_complete(netdev); + spider_net_rx_irq_on(card); + return 0; + } + + return 1; +} + +/** + * spider_net_vlan_rx_reg - initializes VLAN structures in the driver and card + * @netdev: interface device structure + * @grp: vlan_group structure that is registered (NULL on destroying interface) + */ +static void +spider_net_vlan_rx_reg(struct net_device *netdev, struct vlan_group *grp) +{ + /* further enhancement... yet to do */ + return; +} + +/** + * spider_net_vlan_rx_add - adds VLAN id to the card filter + * @netdev: interface device structure + * @vid: VLAN id to add + */ +static void +spider_net_vlan_rx_add(struct net_device *netdev, uint16_t vid) +{ + /* further enhancement... yet to do */ + /* add vid to card's VLAN filter table */ + return; +} + +/** + * spider_net_vlan_rx_kill - removes VLAN id to the card filter + * @netdev: interface device structure + * @vid: VLAN id to remove + */ +static void +spider_net_vlan_rx_kill(struct net_device *netdev, uint16_t vid) +{ + /* further enhancement... yet to do */ + /* remove vid from card's VLAN filter table */ +} + +/** + * spider_net_get_stats - get interface statistics + * @netdev: interface device structure + * + * returns the interface statistics residing in the spider_net_card struct + */ +static struct net_device_stats * +spider_net_get_stats(struct net_device *netdev) +{ + struct spider_net_card *card = netdev_priv(netdev); + struct net_device_stats *stats = &card->netdev_stats; + return stats; +} + +/** + * spider_net_change_mtu - changes the MTU of an interface + * @netdev: interface device structure + * @new_mtu: new MTU value + * + * returns 0 on success, <0 on failure + */ +static int +spider_net_change_mtu(struct net_device *netdev, int new_mtu) +{ + /* no need to re-alloc skbs or so -- the max mtu is about 2.3k + * and mtu is outbound only anyway */ + if ( (new_mtu < SPIDER_NET_MIN_MTU ) || + (new_mtu > SPIDER_NET_MAX_MTU) ) + return -EINVAL; + netdev->mtu = new_mtu; + return 0; +} + +/** + * spider_net_set_mac - sets the MAC of an interface + * @netdev: interface device structure + * @ptr: pointer to new MAC address + * + * Returns 0 on success, <0 on failure. Currently, we don't support this + * and will always return EOPNOTSUPP. + */ +static int +spider_net_set_mac(struct net_device *netdev, void *p) +{ + struct spider_net_card *card = netdev_priv(netdev); + u32 macl, macu, regvalue; + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + /* switch off GMACTPE and GMACRPE */ + regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD); + regvalue &= ~((1 << 5) | (1 << 6)); + spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue); + + /* write mac */ + macu = (addr->sa_data[0]<<24) + (addr->sa_data[1]<<16) + + (addr->sa_data[2]<<8) + (addr->sa_data[3]); + macl = (addr->sa_data[4]<<8) + (addr->sa_data[5]); + spider_net_write_reg(card, SPIDER_NET_GMACUNIMACU, macu); + spider_net_write_reg(card, SPIDER_NET_GMACUNIMACL, macl); + + /* switch GMACTPE and GMACRPE back on */ + regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD); + regvalue |= ((1 << 5) | (1 << 6)); + spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue); + + spider_net_set_promisc(card); + + /* look up, whether we have been successful */ + if (spider_net_get_mac_address(netdev)) + return -EADDRNOTAVAIL; + if (memcmp(netdev->dev_addr,addr->sa_data,netdev->addr_len)) + return -EADDRNOTAVAIL; + + return 0; +} + +/** + * spider_net_enable_txdmac - enables a TX DMA controller + * @card: card structure + * + * spider_net_enable_txdmac enables the TX DMA controller by setting the + * descriptor chain tail address + */ +static void +spider_net_enable_txdmac(struct spider_net_card *card) +{ + /* assume chain is aligned correctly */ + spider_net_write_reg(card, SPIDER_NET_GDTDCHA, + card->tx_chain.tail->bus_addr); +} + +/** + * spider_net_handle_error_irq - handles errors raised by an interrupt + * @card: card structure + * @status_reg: interrupt status register 0 (GHIINT0STS) + * + * spider_net_handle_error_irq treats or ignores all error conditions + * found when an interrupt is presented + */ +static void +spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg) +{ + u32 error_reg1, error_reg2; + u32 i; + int show_error = 1; + + error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS); + error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS); + + /* check GHIINT0STS ************************************/ + if (status_reg) + for (i = 0; i < 32; i++) + if (status_reg & (1<<i)) + switch (i) + { + /* let error_reg1 and error_reg2 evaluation decide, what to do + case SPIDER_NET_PHYINT: + case SPIDER_NET_GMAC2INT: + case SPIDER_NET_GMAC1INT: + case SPIDER_NET_GIPSINT: + case SPIDER_NET_GFIFOINT: + case SPIDER_NET_DMACINT: + case SPIDER_NET_GSYSINT: + break; */ + + case SPIDER_NET_GPWOPCMPINT: + /* PHY write operation completed */ + show_error = 0; + break; + case SPIDER_NET_GPROPCMPINT: + /* PHY read operation completed */ + /* we don't use semaphores, as we poll for the completion + * of the read operation in spider_net_read_phy. Should take + * about 50 us */ + show_error = 0; + break; + case SPIDER_NET_GPWFFINT: + /* PHY command queue full */ + if (netif_msg_intr(card)) + pr_err("PHY write queue full\n"); + show_error = 0; + break; + + /* case SPIDER_NET_GRMDADRINT: not used. print a message */ + /* case SPIDER_NET_GRMARPINT: not used. print a message */ + /* case SPIDER_NET_GRMMPINT: not used. print a message */ + + case SPIDER_NET_GDTDEN0INT: + /* someone has set TX_DMA_EN to 0 */ + show_error = 0; + break; + + case SPIDER_NET_GDDDEN0INT: /* fallthrough */ + case SPIDER_NET_GDCDEN0INT: /* fallthrough */ + case SPIDER_NET_GDBDEN0INT: /* fallthrough */ + case SPIDER_NET_GDADEN0INT: + /* someone has set RX_DMA_EN to 0 */ + show_error = 0; + break; + + /* RX interrupts */ + case SPIDER_NET_GDDFDCINT: + case SPIDER_NET_GDCFDCINT: + case SPIDER_NET_GDBFDCINT: + case SPIDER_NET_GDAFDCINT: + /* case SPIDER_NET_GDNMINT: not used. print a message */ + /* case SPIDER_NET_GCNMINT: not used. print a message */ + /* case SPIDER_NET_GBNMINT: not used. print a message */ + /* case SPIDER_NET_GANMINT: not used. print a message */ + /* case SPIDER_NET_GRFNMINT: not used. print a message */ + show_error = 0; + break; + + /* TX interrupts */ + case SPIDER_NET_GDTFDCINT: + show_error = 0; + break; + case SPIDER_NET_GTTEDINT: + show_error = 0; + break; + case SPIDER_NET_GDTDCEINT: + /* chain end. If a descriptor should be sent, kick off + * tx dma + if (card->tx_chain.tail == card->tx_chain.head) + spider_net_kick_tx_dma(card); + show_error = 0; */ + break; + + /* case SPIDER_NET_G1TMCNTINT: not used. print a message */ + /* case SPIDER_NET_GFREECNTINT: not used. print a message */ + } + + /* check GHIINT1STS ************************************/ + if (error_reg1) + for (i = 0; i < 32; i++) + if (error_reg1 & (1<<i)) + switch (i) + { + case SPIDER_NET_GTMFLLINT: + if (netif_msg_intr(card)) + pr_err("Spider TX RAM full\n"); + show_error = 0; + break; + case SPIDER_NET_GRMFLLINT: + if (netif_msg_intr(card)) + pr_err("Spider RX RAM full, incoming packets " + "might be discarded !\n"); + netif_rx_schedule(card->netdev); + spider_net_enable_rxchtails(card); + spider_net_enable_rxdmac(card); + break; + + /* case SPIDER_NET_GTMSHTINT: problem, print a message */ + case SPIDER_NET_GDTINVDINT: + /* allrighty. tx from previous descr ok */ + show_error = 0; + break; + /* case SPIDER_NET_GRFDFLLINT: print a message down there */ + /* case SPIDER_NET_GRFCFLLINT: print a message down there */ + /* case SPIDER_NET_GRFBFLLINT: print a message down there */ + /* case SPIDER_NET_GRFAFLLINT: print a message down there */ + + /* chain end */ + case SPIDER_NET_GDDDCEINT: /* fallthrough */ + case SPIDER_NET_GDCDCEINT: /* fallthrough */ + case SPIDER_NET_GDBDCEINT: /* fallthrough */ + case SPIDER_NET_GDADCEINT: + if (netif_msg_intr(card)) + pr_err("got descriptor chain end interrupt, " + "restarting DMAC %c.\n", + 'D'+i-SPIDER_NET_GDDDCEINT); + spider_net_refill_rx_chain(card); + show_error = 0; + break; + + /* invalid descriptor */ + case SPIDER_NET_GDDINVDINT: /* fallthrough */ + case SPIDER_NET_GDCINVDINT: /* fallthrough */ + case SPIDER_NET_GDBINVDINT: /* fallthrough */ + case SPIDER_NET_GDAINVDINT: + /* could happen when rx chain is full */ + spider_net_refill_rx_chain(card); + show_error = 0; + break; + + /* case SPIDER_NET_GDTRSERINT: problem, print a message */ + /* case SPIDER_NET_GDDRSERINT: problem, print a message */ + /* case SPIDER_NET_GDCRSERINT: problem, print a message */ + /* case SPIDER_NET_GDBRSERINT: problem, print a message */ + /* case SPIDER_NET_GDARSERINT: problem, print a message */ + /* case SPIDER_NET_GDSERINT: problem, print a message */ + /* case SPIDER_NET_GDTPTERINT: problem, print a message */ + /* case SPIDER_NET_GDDPTERINT: problem, print a message */ + /* case SPIDER_NET_GDCPTERINT: problem, print a message */ + /* case SPIDER_NET_GDBPTERINT: problem, print a message */ + /* case SPIDER_NET_GDAPTERINT: problem, print a message */ + default: + show_error = 1; + break; + } + + /* check GHIINT2STS ************************************/ + if (error_reg2) + for (i = 0; i < 32; i++) + if (error_reg2 & (1<<i)) + switch (i) + { + /* there is nothing we can (want to) do at this time. Log a + * message, we can switch on and off the specific values later on + case SPIDER_NET_GPROPERINT: + case SPIDER_NET_GMCTCRSNGINT: + case SPIDER_NET_GMCTLCOLINT: + case SPIDER_NET_GMCTTMOTINT: + case SPIDER_NET_GMCRCAERINT: + case SPIDER_NET_GMCRCALERINT: + case SPIDER_NET_GMCRALNERINT: + case SPIDER_NET_GMCROVRINT: + case SPIDER_NET_GMCRRNTINT: + case SPIDER_NET_GMCRRXERINT: + case SPIDER_NET_GTITCSERINT: + case SPIDER_NET_GTIFMTERINT: + case SPIDER_NET_GTIPKTRVKINT: + case SPIDER_NET_GTISPINGINT: + case SPIDER_NET_GTISADNGINT: + case SPIDER_NET_GTISPDNGINT: + case SPIDER_NET_GRIFMTERINT: + case SPIDER_NET_GRIPKTRVKINT: + case SPIDER_NET_GRISPINGINT: + case SPIDER_NET_GRISADNGINT: + case SPIDER_NET_GRISPDNGINT: + break; + */ + default: + break; + } + + if ((show_error) && (netif_msg_intr(card))) + pr_err("Got error interrupt, GHIINT0STS = 0x%08x, " + "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n", + status_reg, error_reg1, error_reg2); + + /* clear interrupt sources */ + spider_net_write_reg(card, SPIDER_NET_GHIINT1STS, error_reg1); + spider_net_write_reg(card, SPIDER_NET_GHIINT2STS, error_reg2); +} + +/** + * spider_net_interrupt - interrupt handler for spider_net + * @irq: interupt number + * @ptr: pointer to net_device + * @regs: PU registers + * + * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no + * interrupt found raised by card. + * + * This is the interrupt handler, that turns off + * interrupts for this device and makes the stack poll the driver + */ +static irqreturn_t +spider_net_interrupt(int irq, void *ptr, struct pt_regs *regs) +{ + struct net_device *netdev = ptr; + struct spider_net_card *card = netdev_priv(netdev); + u32 status_reg; + + status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS); + + if (!status_reg) + return IRQ_NONE; + + if (status_reg & SPIDER_NET_TXINT) + spider_net_release_tx_chain(card, 0); + + if (status_reg & SPIDER_NET_RXINT ) { + spider_net_rx_irq_off(card); + netif_rx_schedule(netdev); + } + + /* we do this after rx and tx processing, as we want the tx chain + * processed to see, whether we should restart tx dma processing */ + spider_net_handle_error_irq(card, status_reg); + + /* clear interrupt sources */ + spider_net_write_reg(card, SPIDER_NET_GHIINT0STS, status_reg); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/** + * spider_net_poll_controller - artificial interrupt for netconsole etc. + * @netdev: interface device structure + * + * see Documentation/networking/netconsole.txt + */ +static void +spider_net_poll_controller(struct net_device *netdev) +{ + disable_irq(netdev->irq); + spider_net_interrupt(netdev->irq, netdev, NULL); + enable_irq(netdev->irq); +} +#endif /* CONFIG_NET_POLL_CONTROLLER */ + +/** + * spider_net_init_card - initializes the card + * @card: card structure + * + * spider_net_init_card initializes the card so that other registers can + * be used + */ +static void +spider_net_init_card(struct spider_net_card *card) +{ + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_STOP_VALUE); + + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_RUN_VALUE); +} + +/** + * spider_net_enable_card - enables the card by setting all kinds of regs + * @card: card structure + * + * spider_net_enable_card sets a lot of SMMIO registers to enable the device + */ +static void +spider_net_enable_card(struct spider_net_card *card) +{ + int i; + /* the following array consists of (register),(value) pairs + * that are set in this function. A register of 0 ends the list */ + u32 regs[][2] = { + { SPIDER_NET_GRESUMINTNUM, 0 }, + { SPIDER_NET_GREINTNUM, 0 }, + + /* set interrupt frame number registers */ + /* clear the single DMA engine registers first */ + { SPIDER_NET_GFAFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, + { SPIDER_NET_GFBFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, + { SPIDER_NET_GFCFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, + { SPIDER_NET_GFDFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, + /* then set, what we really need */ + { SPIDER_NET_GFFRMNUM, SPIDER_NET_FRAMENUM_VALUE }, + + /* timer counter registers and stuff */ + { SPIDER_NET_GFREECNNUM, 0 }, + { SPIDER_NET_GONETIMENUM, 0 }, + { SPIDER_NET_GTOUTFRMNUM, 0 }, + + /* RX mode setting */ + { SPIDER_NET_GRXMDSET, SPIDER_NET_RXMODE_VALUE }, + /* TX mode setting */ + { SPIDER_NET_GTXMDSET, SPIDER_NET_TXMODE_VALUE }, + /* IPSEC mode setting */ + { SPIDER_NET_GIPSECINIT, SPIDER_NET_IPSECINIT_VALUE }, + + { SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE }, + + { SPIDER_NET_GMRWOLCTRL, 0 }, + { SPIDER_NET_GTESTMD, 0 }, + + { SPIDER_NET_GMACINTEN, 0 }, + + /* flow control stuff */ + { SPIDER_NET_GMACAPAUSE, SPIDER_NET_MACAPAUSE_VALUE }, + { SPIDER_NET_GMACTXPAUSE, SPIDER_NET_TXPAUSE_VALUE }, + + { SPIDER_NET_GMACBSTLMT, SPIDER_NET_BURSTLMT_VALUE }, + { 0, 0} + }; + + i = 0; + while (regs[i][0]) { + spider_net_write_reg(card, regs[i][0], regs[i][1]); + i++; + } + + /* clear unicast filter table entries 1 to 14 */ + for (i = 1; i <= 14; i++) { + spider_net_write_reg(card, + SPIDER_NET_GMRUAFILnR + i * 8, + 0x00080000); + spider_net_write_reg(card, + SPIDER_NET_GMRUAFILnR + i * 8 + 4, + 0x00000000); + } + + spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, 0x08080000); + + spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE); + + /* set chain tail adress for RX chains and + * enable DMA */ + spider_net_enable_rxchtails(card); + spider_net_enable_rxdmac(card); + + spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE); + + /* set chain tail adress for TX chain */ + spider_net_enable_txdmac(card); + + spider_net_write_reg(card, SPIDER_NET_GMACLENLMT, + SPIDER_NET_LENLMT_VALUE); + spider_net_write_reg(card, SPIDER_NET_GMACMODE, + SPIDER_NET_MACMODE_VALUE); + spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, + SPIDER_NET_OPMODE_VALUE); + + /* set interrupt mask registers */ + spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, + SPIDER_NET_INT0_MASK_VALUE); + spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, + SPIDER_NET_INT1_MASK_VALUE); + spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, + SPIDER_NET_INT2_MASK_VALUE); +} + +/** + * spider_net_open - called upon ifonfig up + * @netdev: interface device structure + * + * returns 0 on success, <0 on failure + * + * spider_net_open allocates all the descriptors and memory needed for + * operation, sets up multicast list and enables interrupts + */ +int +spider_net_open(struct net_device *netdev) +{ + struct spider_net_card *card = netdev_priv(netdev); + int result; + + result = -ENOMEM; + if (spider_net_init_chain(card, &card->tx_chain, + card->descr, tx_descriptors)) + goto alloc_tx_failed; + if (spider_net_init_chain(card, &card->rx_chain, + card->descr + tx_descriptors, rx_descriptors)) + goto alloc_rx_failed; + + /* allocate rx skbs */ + if (spider_net_alloc_rx_skbs(card)) + goto alloc_skbs_failed; + + spider_net_set_multi(netdev); + + /* further enhancement: setup hw vlan, if needed */ + + result = -EBUSY; + if (request_irq(netdev->irq, spider_net_interrupt, + SA_SHIRQ, netdev->name, netdev)) + goto register_int_failed; + + spider_net_enable_card(card); + + netif_start_queue(netdev); + netif_carrier_on(netdev); + netif_poll_enable(netdev); + + return 0; + +register_int_failed: + spider_net_free_rx_chain_contents(card); +alloc_skbs_failed: + spider_net_free_chain(card, &card->rx_chain); +alloc_rx_failed: + spider_net_free_chain(card, &card->tx_chain); +alloc_tx_failed: + return result; +} + +/** + * spider_net_setup_phy - setup PHY + * @card: card structure + * + * returns 0 on success, <0 on failure + * + * spider_net_setup_phy is used as part of spider_net_probe. Sets + * the PHY to 1000 Mbps + **/ +static int +spider_net_setup_phy(struct spider_net_card *card) +{ + struct mii_phy *phy = &card->phy; + + spider_net_write_reg(card, SPIDER_NET_GDTDMASEL, + SPIDER_NET_DMASEL_VALUE); + spider_net_write_reg(card, SPIDER_NET_GPCCTRL, + SPIDER_NET_PHY_CTRL_VALUE); + phy->mii_id = 1; + phy->dev = card->netdev; + phy->mdio_read = spider_net_read_phy; + phy->mdio_write = spider_net_write_phy; + + mii_phy_probe(phy, phy->mii_id); + + if (phy->def->ops->setup_forced) + phy->def->ops->setup_forced(phy, SPEED_1000, DUPLEX_FULL); + + /* the following two writes could be moved to sungem_phy.c */ + /* enable fiber mode */ + spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0x9020); + /* LEDs active in both modes, autosense prio = fiber */ + spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0x945f); + + phy->def->ops->read_link(phy); + pr_info("Found %s with %i Mbps, %s-duplex.\n", phy->def->name, + phy->speed, phy->duplex==1 ? "Full" : "Half"); + + return 0; +} + +/** + * spider_net_download_firmware - loads firmware into the adapter + * @card: card structure + * @firmware: firmware pointer + * + * spider_net_download_firmware loads the firmware opened by + * spider_net_init_firmware into the adapter. + */ +static void +spider_net_download_firmware(struct spider_net_card *card, + const struct firmware *firmware) +{ + int sequencer, i; + u32 *fw_ptr = (u32 *)firmware->data; + + /* stop sequencers */ + spider_net_write_reg(card, SPIDER_NET_GSINIT, + SPIDER_NET_STOP_SEQ_VALUE); + + for (sequencer = 0; sequencer < 6; sequencer++) { + spider_net_write_reg(card, + SPIDER_NET_GSnPRGADR + sequencer * 8, 0); + for (i = 0; i < SPIDER_NET_FIRMWARE_LEN; i++) { + spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT + + sequencer * 8, *fw_ptr); + fw_ptr++; + } + } + + spider_net_write_reg(card, SPIDER_NET_GSINIT, + SPIDER_NET_RUN_SEQ_VALUE); +} + +/** + * spider_net_init_firmware - reads in firmware parts + * @card: card structure + * + * Returns 0 on success, <0 on failure + * + * spider_net_init_firmware opens the sequencer firmware and does some basic + * checks. This function opens and releases the firmware structure. A call + * to download the firmware is performed before the release. + * + * Firmware format + * =============== + * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being + * the program for each sequencer. Use the command + * tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \ + * Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \ + * Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin + * + * to generate spider_fw.bin, if you have sequencer programs with something + * like the following contents for each sequencer: + * <ONE LINE COMMENT> + * <FIRST 4-BYTES-WORD FOR SEQUENCER> + * <SECOND 4-BYTES-WORD FOR SEQUENCER> + * ... + * <1024th 4-BYTES-WORD FOR SEQUENCER> + */ +static int +spider_net_init_firmware(struct spider_net_card *card) +{ + const struct firmware *firmware; + int err = -EIO; + + if (request_firmware(&firmware, + SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) < 0) { + if (netif_msg_probe(card)) + pr_err("Couldn't read in sequencer data file %s.\n", + SPIDER_NET_FIRMWARE_NAME); + firmware = NULL; + goto out; + } + + if (firmware->size != 6 * SPIDER_NET_FIRMWARE_LEN * sizeof(u32)) { + if (netif_msg_probe(card)) + pr_err("Invalid size of sequencer data file %s.\n", + SPIDER_NET_FIRMWARE_NAME); + goto out; + } + + spider_net_download_firmware(card, firmware); + + err = 0; +out: + release_firmware(firmware); + + return err; +} + +/** + * spider_net_workaround_rxramfull - work around firmware bug + * @card: card structure + * + * no return value + **/ +static void +spider_net_workaround_rxramfull(struct spider_net_card *card) +{ + int i, sequencer = 0; + + /* cancel reset */ + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_RUN_VALUE); + + /* empty sequencer data */ + for (sequencer = 0; sequencer < 6; sequencer++) { + spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT + + sequencer * 8, 0x0); + for (i = 0; i < SPIDER_NET_FIRMWARE_LEN; i++) { + spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT + + sequencer * 8, 0x0); + } + } + + /* set sequencer operation */ + spider_net_write_reg(card, SPIDER_NET_GSINIT, 0x000000fe); + + /* reset */ + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_STOP_VALUE); +} + +/** + * spider_net_tx_timeout_task - task scheduled by the watchdog timeout + * function (to be called not under interrupt status) + * @data: data, is interface device structure + * + * called as task when tx hangs, resets interface (if interface is up) + */ +static void +spider_net_tx_timeout_task(void *data) +{ + struct net_device *netdev = data; + struct spider_net_card *card = netdev_priv(netdev); + + if (!(netdev->flags & IFF_UP)) + goto out; + + netif_device_detach(netdev); + spider_net_stop(netdev); + + spider_net_workaround_rxramfull(card); + spider_net_init_card(card); + + if (spider_net_setup_phy(card)) + goto out; + if (spider_net_init_firmware(card)) + goto out; + + spider_net_open(netdev); + spider_net_kick_tx_dma(card, card->tx_chain.head); + netif_device_attach(netdev); + +out: + atomic_dec(&card->tx_timeout_task_counter); +} + +/** + * spider_net_tx_timeout - called when the tx timeout watchdog kicks in. + * @netdev: interface device structure + * + * called, if tx hangs. Schedules a task that resets the interface + */ +static void +spider_net_tx_timeout(struct net_device *netdev) +{ + struct spider_net_card *card; + + card = netdev_priv(netdev); + atomic_inc(&card->tx_timeout_task_counter); + if (netdev->flags & IFF_UP) + schedule_work(&card->tx_timeout_task); + else + atomic_dec(&card->tx_timeout_task_counter); +} + +/** + * spider_net_setup_netdev_ops - initialization of net_device operations + * @netdev: net_device structure + * + * fills out function pointers in the net_device structure + */ +static void +spider_net_setup_netdev_ops(struct net_device *netdev) +{ + netdev->open = &spider_net_open; + netdev->stop = &spider_net_stop; + netdev->hard_start_xmit = &spider_net_xmit; + netdev->get_stats = &spider_net_get_stats; + netdev->set_multicast_list = &spider_net_set_multi; + netdev->set_mac_address = &spider_net_set_mac; + netdev->change_mtu = &spider_net_change_mtu; + netdev->do_ioctl = &spider_net_do_ioctl; + /* tx watchdog */ + netdev->tx_timeout = &spider_net_tx_timeout; + netdev->watchdog_timeo = SPIDER_NET_WATCHDOG_TIMEOUT; + /* NAPI */ + netdev->poll = &spider_net_poll; + netdev->weight = SPIDER_NET_NAPI_WEIGHT; + /* HW VLAN */ + netdev->vlan_rx_register = &spider_net_vlan_rx_reg; + netdev->vlan_rx_add_vid = &spider_net_vlan_rx_add; + netdev->vlan_rx_kill_vid = &spider_net_vlan_rx_kill; +#ifdef CONFIG_NET_POLL_CONTROLLER + /* poll controller */ + netdev->poll_controller = &spider_net_poll_controller; +#endif /* CONFIG_NET_POLL_CONTROLLER */ + /* ethtool ops */ + netdev->ethtool_ops = &spider_net_ethtool_ops; +} + +/** + * spider_net_setup_netdev - initialization of net_device + * @card: card structure + * + * Returns 0 on success or <0 on failure + * + * spider_net_setup_netdev initializes the net_device structure + **/ +static int +spider_net_setup_netdev(struct spider_net_card *card) +{ + int result; + struct net_device *netdev = card->netdev; + struct device_node *dn; + struct sockaddr addr; + u8 *mac; + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &card->pdev->dev); + + pci_set_drvdata(card->pdev, netdev); + spin_lock_init(&card->intmask_lock); + netdev->irq = card->pdev->irq; + + card->options.rx_csum = SPIDER_NET_RX_CSUM_DEFAULT; + + spider_net_setup_netdev_ops(netdev); + + netdev->features = 0; + /* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | + * NETIF_F_HW_VLAN_FILTER */ + + netdev->irq = card->pdev->irq; + + dn = pci_device_to_OF_node(card->pdev); + if (!dn) + return -EIO; + + mac = (u8 *)get_property(dn, "local-mac-address", NULL); + if (!mac) + return -EIO; + memcpy(addr.sa_data, mac, ETH_ALEN); + + result = spider_net_set_mac(netdev, &addr); + if ((result) && (netif_msg_probe(card))) + pr_err("Failed to set MAC address: %i\n", result); + + result = register_netdev(netdev); + if (result) { + if (netif_msg_probe(card)) + pr_err("Couldn't register net_device: %i\n", + result); + return result; + } + + if (netif_msg_probe(card)) + pr_info("Initialized device %s.\n", netdev->name); + + return 0; +} + +/** + * spider_net_alloc_card - allocates net_device and card structure + * + * returns the card structure or NULL in case of errors + * + * the card and net_device structures are linked to each other + */ +static struct spider_net_card * +spider_net_alloc_card(void) +{ + struct net_device *netdev; + struct spider_net_card *card; + size_t alloc_size; + + alloc_size = sizeof (*card) + + sizeof (struct spider_net_descr) * rx_descriptors + + sizeof (struct spider_net_descr) * tx_descriptors; + netdev = alloc_etherdev(alloc_size); + if (!netdev) + return NULL; + + card = netdev_priv(netdev); + card->netdev = netdev; + card->msg_enable = SPIDER_NET_DEFAULT_MSG; + INIT_WORK(&card->tx_timeout_task, spider_net_tx_timeout_task, netdev); + init_waitqueue_head(&card->waitq); + atomic_set(&card->tx_timeout_task_counter, 0); + + return card; +} + +/** + * spider_net_undo_pci_setup - releases PCI ressources + * @card: card structure + * + * spider_net_undo_pci_setup releases the mapped regions + */ +static void +spider_net_undo_pci_setup(struct spider_net_card *card) +{ + iounmap(card->regs); + pci_release_regions(card->pdev); +} + +/** + * spider_net_setup_pci_dev - sets up the device in terms of PCI operations + * @card: card structure + * @pdev: PCI device + * + * Returns the card structure or NULL if any errors occur + * + * spider_net_setup_pci_dev initializes pdev and together with the + * functions called in spider_net_open configures the device so that + * data can be transferred over it + * The net_device structure is attached to the card structure, if the + * function returns without error. + **/ +static struct spider_net_card * +spider_net_setup_pci_dev(struct pci_dev *pdev) +{ + struct spider_net_card *card; + unsigned long mmio_start, mmio_len; + + if (pci_enable_device(pdev)) { + pr_err("Couldn't enable PCI device\n"); + return NULL; + } + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + pr_err("Couldn't find proper PCI device base address.\n"); + goto out_disable_dev; + } + + if (pci_request_regions(pdev, spider_net_driver_name)) { + pr_err("Couldn't obtain PCI resources, aborting.\n"); + goto out_disable_dev; + } + + pci_set_master(pdev); + + card = spider_net_alloc_card(); + if (!card) { + pr_err("Couldn't allocate net_device structure, " + "aborting.\n"); + goto out_release_regions; + } + card->pdev = pdev; + + /* fetch base address and length of first resource */ + mmio_start = pci_resource_start(pdev, 0); + mmio_len = pci_resource_len(pdev, 0); + + card->netdev->mem_start = mmio_start; + card->netdev->mem_end = mmio_start + mmio_len; + card->regs = ioremap(mmio_start, mmio_len); + + if (!card->regs) { + pr_err("Couldn't obtain PCI resources, aborting.\n"); + goto out_release_regions; + } + + return card; + +out_release_regions: + pci_release_regions(pdev); +out_disable_dev: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + return NULL; +} + +/** + * spider_net_probe - initialization of a device + * @pdev: PCI device + * @ent: entry in the device id list + * + * Returns 0 on success, <0 on failure + * + * spider_net_probe initializes pdev and registers a net_device + * structure for it. After that, the device can be ifconfig'ed up + **/ +static int __devinit +spider_net_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int err = -EIO; + struct spider_net_card *card; + + card = spider_net_setup_pci_dev(pdev); + if (!card) + goto out; + + spider_net_workaround_rxramfull(card); + spider_net_init_card(card); + + err = spider_net_setup_phy(card); + if (err) + goto out_undo_pci; + + err = spider_net_init_firmware(card); + if (err) + goto out_undo_pci; + + err = spider_net_setup_netdev(card); + if (err) + goto out_undo_pci; + + return 0; + +out_undo_pci: + spider_net_undo_pci_setup(card); + free_netdev(card->netdev); +out: + return err; +} + +/** + * spider_net_remove - removal of a device + * @pdev: PCI device + * + * Returns 0 on success, <0 on failure + * + * spider_net_remove is called to remove the device and unregisters the + * net_device + **/ +static void __devexit +spider_net_remove(struct pci_dev *pdev) +{ + struct net_device *netdev; + struct spider_net_card *card; + + netdev = pci_get_drvdata(pdev); + card = netdev_priv(netdev); + + wait_event(card->waitq, + atomic_read(&card->tx_timeout_task_counter) == 0); + + unregister_netdev(netdev); + + /* switch off card */ + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_STOP_VALUE); + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_RUN_VALUE); + + spider_net_undo_pci_setup(card); + free_netdev(netdev); +} + +static struct pci_driver spider_net_driver = { + .owner = THIS_MODULE, + .name = spider_net_driver_name, + .id_table = spider_net_pci_tbl, + .probe = spider_net_probe, + .remove = __devexit_p(spider_net_remove) +}; + +/** + * spider_net_init - init function when the driver is loaded + * + * spider_net_init registers the device driver + */ +static int __init spider_net_init(void) +{ + if (rx_descriptors < SPIDER_NET_RX_DESCRIPTORS_MIN) { + rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MIN; + pr_info("adjusting rx descriptors to %i.\n", rx_descriptors); + } + if (rx_descriptors > SPIDER_NET_RX_DESCRIPTORS_MAX) { + rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MAX; + pr_info("adjusting rx descriptors to %i.\n", rx_descriptors); + } + if (tx_descriptors < SPIDER_NET_TX_DESCRIPTORS_MIN) { + tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MIN; + pr_info("adjusting tx descriptors to %i.\n", tx_descriptors); + } + if (tx_descriptors > SPIDER_NET_TX_DESCRIPTORS_MAX) { + tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MAX; + pr_info("adjusting tx descriptors to %i.\n", tx_descriptors); + } + + return pci_register_driver(&spider_net_driver); +} + +/** + * spider_net_cleanup - exit function when driver is unloaded + * + * spider_net_cleanup unregisters the device driver + */ +static void __exit spider_net_cleanup(void) +{ + pci_unregister_driver(&spider_net_driver); +} + +module_init(spider_net_init); +module_exit(spider_net_cleanup); |