diff options
Diffstat (limited to 'drivers/net/tulip/dmfe.c')
| -rw-r--r-- | drivers/net/tulip/dmfe.c | 2066 |
1 files changed, 2066 insertions, 0 deletions
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c new file mode 100644 index 000000000000..e25f33df223e --- /dev/null +++ b/drivers/net/tulip/dmfe.c @@ -0,0 +1,2066 @@ +/* + A Davicom DM9102/DM9102A/DM9102A+DM9801/DM9102A+DM9802 NIC fast + ethernet driver for Linux. + Copyright (C) 1997 Sten Wang + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + DAVICOM Web-Site: www.davicom.com.tw + + Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw + Maintainer: Tobias Ringstrom <tori@unhappy.mine.nu> + + (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved. + + Marcelo Tosatti <marcelo@conectiva.com.br> : + Made it compile in 2.3 (device to net_device) + + Alan Cox <alan@redhat.com> : + Cleaned up for kernel merge. + Removed the back compatibility support + Reformatted, fixing spelling etc as I went + Removed IRQ 0-15 assumption + + Jeff Garzik <jgarzik@pobox.com> : + Updated to use new PCI driver API. + Resource usage cleanups. + Report driver version to user. + + Tobias Ringstrom <tori@unhappy.mine.nu> : + Cleaned up and added SMP safety. Thanks go to Jeff Garzik, + Andrew Morton and Frank Davis for the SMP safety fixes. + + Vojtech Pavlik <vojtech@suse.cz> : + Cleaned up pointer arithmetics. + Fixed a lot of 64bit issues. + Cleaned up printk()s a bit. + Fixed some obvious big endian problems. + + Tobias Ringstrom <tori@unhappy.mine.nu> : + Use time_after for jiffies calculation. Added ethtool + support. Updated PCI resource allocation. Do not + forget to unmap PCI mapped skbs. + + Alan Cox <alan@redhat.com> + Added new PCI identifiers provided by Clear Zhang at ALi + for their 1563 ethernet device. + + TODO + + Implement pci_driver::suspend() and pci_driver::resume() + power management methods. + + Check on 64 bit boxes. + Check and fix on big endian boxes. + + Test and make sure PCI latency is now correct for all cases. +*/ + +#define DRV_NAME "dmfe" +#define DRV_VERSION "1.36.4" +#define DRV_RELDATE "2002-01-17" + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ptrace.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/skbuff.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/crc32.h> +#include <linux/bitops.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/uaccess.h> +#include <asm/irq.h> + + +/* Board/System/Debug information/definition ---------------- */ +#define PCI_DM9132_ID 0x91321282 /* Davicom DM9132 ID */ +#define PCI_DM9102_ID 0x91021282 /* Davicom DM9102 ID */ +#define PCI_DM9100_ID 0x91001282 /* Davicom DM9100 ID */ +#define PCI_DM9009_ID 0x90091282 /* Davicom DM9009 ID */ + +#define DM9102_IO_SIZE 0x80 +#define DM9102A_IO_SIZE 0x100 +#define TX_MAX_SEND_CNT 0x1 /* Maximum tx packet per time */ +#define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */ +#define RX_DESC_CNT 0x20 /* Allocated Rx descriptors */ +#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ +#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ +#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) +#define TX_BUF_ALLOC 0x600 +#define RX_ALLOC_SIZE 0x620 +#define DM910X_RESET 1 +#define CR0_DEFAULT 0x00E00000 /* TX & RX burst mode */ +#define CR6_DEFAULT 0x00080000 /* HD */ +#define CR7_DEFAULT 0x180c1 +#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ +#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ +#define MAX_PACKET_SIZE 1514 +#define DMFE_MAX_MULTICAST 14 +#define RX_COPY_SIZE 100 +#define MAX_CHECK_PACKET 0x8000 +#define DM9801_NOISE_FLOOR 8 +#define DM9802_NOISE_FLOOR 5 + +#define DMFE_10MHF 0 +#define DMFE_100MHF 1 +#define DMFE_10MFD 4 +#define DMFE_100MFD 5 +#define DMFE_AUTO 8 +#define DMFE_1M_HPNA 0x10 + +#define DMFE_TXTH_72 0x400000 /* TX TH 72 byte */ +#define DMFE_TXTH_96 0x404000 /* TX TH 96 byte */ +#define DMFE_TXTH_128 0x0000 /* TX TH 128 byte */ +#define DMFE_TXTH_256 0x4000 /* TX TH 256 byte */ +#define DMFE_TXTH_512 0x8000 /* TX TH 512 byte */ +#define DMFE_TXTH_1K 0xC000 /* TX TH 1K byte */ + +#define DMFE_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ +#define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */ +#define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */ + +#define DMFE_DBUG(dbug_now, msg, value) if (dmfe_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value)) + +#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half"); + + +/* CR9 definition: SROM/MII */ +#define CR9_SROM_READ 0x4800 +#define CR9_SRCS 0x1 +#define CR9_SRCLK 0x2 +#define CR9_CRDOUT 0x8 +#define SROM_DATA_0 0x0 +#define SROM_DATA_1 0x4 +#define PHY_DATA_1 0x20000 +#define PHY_DATA_0 0x00000 +#define MDCLKH 0x10000 + +#define PHY_POWER_DOWN 0x800 + +#define SROM_V41_CODE 0x14 + +#define SROM_CLK_WRITE(data, ioaddr) outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5); + +#define __CHK_IO_SIZE(pci_id, dev_rev) ( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? DM9102A_IO_SIZE: DM9102_IO_SIZE +#define CHK_IO_SIZE(pci_dev, dev_rev) __CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev) + +/* Sten Check */ +#define DEVICE net_device + +/* Structure/enum declaration ------------------------------- */ +struct tx_desc { + u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ + char *tx_buf_ptr; /* Data for us */ + struct tx_desc *next_tx_desc; +} __attribute__(( aligned(32) )); + +struct rx_desc { + u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ + struct sk_buff *rx_skb_ptr; /* Data for us */ + struct rx_desc *next_rx_desc; +} __attribute__(( aligned(32) )); + +struct dmfe_board_info { + u32 chip_id; /* Chip vendor/Device ID */ + u32 chip_revision; /* Chip revision */ + struct DEVICE *next_dev; /* next device */ + struct pci_dev *pdev; /* PCI device */ + spinlock_t lock; + + long ioaddr; /* I/O base address */ + u32 cr0_data; + u32 cr5_data; + u32 cr6_data; + u32 cr7_data; + u32 cr15_data; + + /* pointer for memory physical address */ + dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ + dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ + dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ + dma_addr_t first_tx_desc_dma; + dma_addr_t first_rx_desc_dma; + + /* descriptor pointer */ + unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ + unsigned char *buf_pool_start; /* Tx buffer pool align dword */ + unsigned char *desc_pool_ptr; /* descriptor pool memory */ + struct tx_desc *first_tx_desc; + struct tx_desc *tx_insert_ptr; + struct tx_desc *tx_remove_ptr; + struct rx_desc *first_rx_desc; + struct rx_desc *rx_insert_ptr; + struct rx_desc *rx_ready_ptr; /* packet come pointer */ + unsigned long tx_packet_cnt; /* transmitted packet count */ + unsigned long tx_queue_cnt; /* wait to send packet count */ + unsigned long rx_avail_cnt; /* available rx descriptor count */ + unsigned long interval_rx_cnt; /* rx packet count a callback time */ + + u16 HPNA_command; /* For HPNA register 16 */ + u16 HPNA_timer; /* For HPNA remote device check */ + u16 dbug_cnt; + u16 NIC_capability; /* NIC media capability */ + u16 PHY_reg4; /* Saved Phyxcer register 4 value */ + + u8 HPNA_present; /* 0:none, 1:DM9801, 2:DM9802 */ + u8 chip_type; /* Keep DM9102A chip type */ + u8 media_mode; /* user specify media mode */ + u8 op_mode; /* real work media mode */ + u8 phy_addr; + u8 link_failed; /* Ever link failed */ + u8 wait_reset; /* Hardware failed, need to reset */ + u8 dm910x_chk_mode; /* Operating mode check */ + u8 first_in_callback; /* Flag to record state */ + struct timer_list timer; + + /* System defined statistic counter */ + struct net_device_stats stats; + + /* Driver defined statistic counter */ + unsigned long tx_fifo_underrun; + unsigned long tx_loss_carrier; + unsigned long tx_no_carrier; + unsigned long tx_late_collision; + unsigned long tx_excessive_collision; + unsigned long tx_jabber_timeout; + unsigned long reset_count; + unsigned long reset_cr8; + unsigned long reset_fatal; + unsigned long reset_TXtimeout; + + /* NIC SROM data */ + unsigned char srom[128]; +}; + +enum dmfe_offsets { + DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, + DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, + DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, + DCR15 = 0x78 +}; + +enum dmfe_CR6_bits { + CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, + CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, + CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 +}; + +/* Global variable declaration ----------------------------- */ +static int __devinitdata printed_version; +static char version[] __devinitdata = + KERN_INFO DRV_NAME ": Davicom DM9xxx net driver, version " + DRV_VERSION " (" DRV_RELDATE ")\n"; + +static int dmfe_debug; +static unsigned char dmfe_media_mode = DMFE_AUTO; +static u32 dmfe_cr6_user_set; + +/* For module input parameter */ +static int debug; +static u32 cr6set; +static unsigned char mode = 8; +static u8 chkmode = 1; +static u8 HPNA_mode; /* Default: Low Power/High Speed */ +static u8 HPNA_rx_cmd; /* Default: Disable Rx remote command */ +static u8 HPNA_tx_cmd; /* Default: Don't issue remote command */ +static u8 HPNA_NoiseFloor; /* Default: HPNA NoiseFloor */ +static u8 SF_mode; /* Special Function: 1:VLAN, 2:RX Flow Control + 4: TX pause packet */ + + +/* function declaration ------------------------------------- */ +static int dmfe_open(struct DEVICE *); +static int dmfe_start_xmit(struct sk_buff *, struct DEVICE *); +static int dmfe_stop(struct DEVICE *); +static struct net_device_stats * dmfe_get_stats(struct DEVICE *); +static void dmfe_set_filter_mode(struct DEVICE *); +static struct ethtool_ops netdev_ethtool_ops; +static u16 read_srom_word(long ,int); +static irqreturn_t dmfe_interrupt(int , void *, struct pt_regs *); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void poll_dmfe (struct net_device *dev); +#endif +static void dmfe_descriptor_init(struct dmfe_board_info *, unsigned long); +static void allocate_rx_buffer(struct dmfe_board_info *); +static void update_cr6(u32, unsigned long); +static void send_filter_frame(struct DEVICE * ,int); +static void dm9132_id_table(struct DEVICE * ,int); +static u16 phy_read(unsigned long, u8, u8, u32); +static void phy_write(unsigned long, u8, u8, u16, u32); +static void phy_write_1bit(unsigned long, u32); +static u16 phy_read_1bit(unsigned long); +static u8 dmfe_sense_speed(struct dmfe_board_info *); +static void dmfe_process_mode(struct dmfe_board_info *); +static void dmfe_timer(unsigned long); +static inline u32 cal_CRC(unsigned char *, unsigned int, u8); +static void dmfe_rx_packet(struct DEVICE *, struct dmfe_board_info *); +static void dmfe_free_tx_pkt(struct DEVICE *, struct dmfe_board_info *); +static void dmfe_reuse_skb(struct dmfe_board_info *, struct sk_buff *); +static void dmfe_dynamic_reset(struct DEVICE *); +static void dmfe_free_rxbuffer(struct dmfe_board_info *); +static void dmfe_init_dm910x(struct DEVICE *); +static void dmfe_parse_srom(struct dmfe_board_info *); +static void dmfe_program_DM9801(struct dmfe_board_info *, int); +static void dmfe_program_DM9802(struct dmfe_board_info *); +static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * ); +static void dmfe_set_phyxcer(struct dmfe_board_info *); + +/* DM910X network baord routine ---------------------------- */ + +/* + * Search DM910X board ,allocate space and register it + */ + +static int __devinit dmfe_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct dmfe_board_info *db; /* board information structure */ + struct net_device *dev; + u32 dev_rev, pci_pmr; + int i, err; + + DMFE_DBUG(0, "dmfe_init_one()", 0); + + if (!printed_version++) + printk(version); + + /* Init network device */ + dev = alloc_etherdev(sizeof(*db)); + if (dev == NULL) + return -ENOMEM; + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + if (pci_set_dma_mask(pdev, 0xffffffff)) { + printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n"); + err = -ENODEV; + goto err_out_free; + } + + /* Enable Master/IO access, Disable memory access */ + err = pci_enable_device(pdev); + if (err) + goto err_out_free; + + if (!pci_resource_start(pdev, 0)) { + printk(KERN_ERR DRV_NAME ": I/O base is zero\n"); + err = -ENODEV; + goto err_out_disable; + } + + /* Read Chip revision */ + pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev); + + if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev, dev_rev)) ) { + printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n"); + err = -ENODEV; + goto err_out_disable; + } + +#if 0 /* pci_{enable_device,set_master} sets minimum latency for us now */ + + /* Set Latency Timer 80h */ + /* FIXME: setting values > 32 breaks some SiS 559x stuff. + Need a PCI quirk.. */ + + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); +#endif + + if (pci_request_regions(pdev, DRV_NAME)) { + printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n"); + err = -ENODEV; + goto err_out_disable; + } + + /* Init system & device */ + db = netdev_priv(dev); + + /* Allocate Tx/Rx descriptor memory */ + db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); + db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); + + db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; + db->first_tx_desc_dma = db->desc_pool_dma_ptr; + db->buf_pool_start = db->buf_pool_ptr; + db->buf_pool_dma_start = db->buf_pool_dma_ptr; + + db->chip_id = ent->driver_data; + db->ioaddr = pci_resource_start(pdev, 0); + db->chip_revision = dev_rev; + + db->pdev = pdev; + + dev->base_addr = db->ioaddr; + dev->irq = pdev->irq; + pci_set_drvdata(pdev, dev); + dev->open = &dmfe_open; + dev->hard_start_xmit = &dmfe_start_xmit; + dev->stop = &dmfe_stop; + dev->get_stats = &dmfe_get_stats; + dev->set_multicast_list = &dmfe_set_filter_mode; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = &poll_dmfe; +#endif + dev->ethtool_ops = &netdev_ethtool_ops; + spin_lock_init(&db->lock); + + pci_read_config_dword(pdev, 0x50, &pci_pmr); + pci_pmr &= 0x70000; + if ( (pci_pmr == 0x10000) && (dev_rev == 0x02000031) ) + db->chip_type = 1; /* DM9102A E3 */ + else + db->chip_type = 0; + + /* read 64 word srom data */ + for (i = 0; i < 64; i++) + ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i)); + + /* Set Node address */ + for (i = 0; i < 6; i++) + dev->dev_addr[i] = db->srom[20 + i]; + + err = register_netdev (dev); + if (err) + goto err_out_res; + + printk(KERN_INFO "%s: Davicom DM%04lx at pci%s,", + dev->name, + ent->driver_data >> 16, + pci_name(pdev)); + for (i = 0; i < 6; i++) + printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]); + printk(", irq %d.\n", dev->irq); + + pci_set_master(pdev); + + return 0; + +err_out_res: + pci_release_regions(pdev); +err_out_disable: + pci_disable_device(pdev); +err_out_free: + pci_set_drvdata(pdev, NULL); + free_netdev(dev); + + return err; +} + + +static void __devexit dmfe_remove_one (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct dmfe_board_info *db = netdev_priv(dev); + + DMFE_DBUG(0, "dmfe_remove_one()", 0); + + if (dev) { + pci_free_consistent(db->pdev, sizeof(struct tx_desc) * + DESC_ALL_CNT + 0x20, db->desc_pool_ptr, + db->desc_pool_dma_ptr); + pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); + unregister_netdev(dev); + pci_release_regions(pdev); + free_netdev(dev); /* free board information */ + pci_set_drvdata(pdev, NULL); + } + + DMFE_DBUG(0, "dmfe_remove_one() exit", 0); +} + + +/* + * Open the interface. + * The interface is opened whenever "ifconfig" actives it. + */ + +static int dmfe_open(struct DEVICE *dev) +{ + int ret; + struct dmfe_board_info *db = netdev_priv(dev); + + DMFE_DBUG(0, "dmfe_open", 0); + + ret = request_irq(dev->irq, &dmfe_interrupt, SA_SHIRQ, dev->name, dev); + if (ret) + return ret; + + /* system variable init */ + db->cr6_data = CR6_DEFAULT | dmfe_cr6_user_set; + db->tx_packet_cnt = 0; + db->tx_queue_cnt = 0; + db->rx_avail_cnt = 0; + db->link_failed = 1; + db->wait_reset = 0; + + db->first_in_callback = 0; + db->NIC_capability = 0xf; /* All capability*/ + db->PHY_reg4 = 0x1e0; + + /* CR6 operation mode decision */ + if ( !chkmode || (db->chip_id == PCI_DM9132_ID) || + (db->chip_revision >= 0x02000030) ) { + db->cr6_data |= DMFE_TXTH_256; + db->cr0_data = CR0_DEFAULT; + db->dm910x_chk_mode=4; /* Enter the normal mode */ + } else { + db->cr6_data |= CR6_SFT; /* Store & Forward mode */ + db->cr0_data = 0; + db->dm910x_chk_mode = 1; /* Enter the check mode */ + } + + /* Initilize DM910X board */ + dmfe_init_dm910x(dev); + + /* Active System Interface */ + netif_wake_queue(dev); + + /* set and active a timer process */ + init_timer(&db->timer); + db->timer.expires = DMFE_TIMER_WUT + HZ * 2; + db->timer.data = (unsigned long)dev; + db->timer.function = &dmfe_timer; + add_timer(&db->timer); + + return 0; +} + + +/* Initilize DM910X board + * Reset DM910X board + * Initilize TX/Rx descriptor chain structure + * Send the set-up frame + * Enable Tx/Rx machine + */ + +static void dmfe_init_dm910x(struct DEVICE *dev) +{ + struct dmfe_board_info *db = netdev_priv(dev); + unsigned long ioaddr = db->ioaddr; + + DMFE_DBUG(0, "dmfe_init_dm910x()", 0); + + /* Reset DM910x MAC controller */ + outl(DM910X_RESET, ioaddr + DCR0); /* RESET MAC */ + udelay(100); + outl(db->cr0_data, ioaddr + DCR0); + udelay(5); + + /* Phy addr : DM910(A)2/DM9132/9801, phy address = 1 */ + db->phy_addr = 1; + + /* Parser SROM and media mode */ + dmfe_parse_srom(db); + db->media_mode = dmfe_media_mode; + + /* RESET Phyxcer Chip by GPR port bit 7 */ + outl(0x180, ioaddr + DCR12); /* Let bit 7 output port */ + if (db->chip_id == PCI_DM9009_ID) { + outl(0x80, ioaddr + DCR12); /* Issue RESET signal */ + mdelay(300); /* Delay 300 ms */ + } + outl(0x0, ioaddr + DCR12); /* Clear RESET signal */ + + /* Process Phyxcer Media Mode */ + if ( !(db->media_mode & 0x10) ) /* Force 1M mode */ + dmfe_set_phyxcer(db); + + /* Media Mode Process */ + if ( !(db->media_mode & DMFE_AUTO) ) + db->op_mode = db->media_mode; /* Force Mode */ + + /* Initiliaze Transmit/Receive decriptor and CR3/4 */ + dmfe_descriptor_init(db, ioaddr); + + /* Init CR6 to program DM910x operation */ + update_cr6(db->cr6_data, ioaddr); + + /* Send setup frame */ + if (db->chip_id == PCI_DM9132_ID) + dm9132_id_table(dev, dev->mc_count); /* DM9132 */ + else + send_filter_frame(dev, dev->mc_count); /* DM9102/DM9102A */ + + /* Init CR7, interrupt active bit */ + db->cr7_data = CR7_DEFAULT; + outl(db->cr7_data, ioaddr + DCR7); + + /* Init CR15, Tx jabber and Rx watchdog timer */ + outl(db->cr15_data, ioaddr + DCR15); + + /* Enable DM910X Tx/Rx function */ + db->cr6_data |= CR6_RXSC | CR6_TXSC | 0x40000; + update_cr6(db->cr6_data, ioaddr); +} + + +/* + * Hardware start transmission. + * Send a packet to media from the upper layer. + */ + +static int dmfe_start_xmit(struct sk_buff *skb, struct DEVICE *dev) +{ + struct dmfe_board_info *db = netdev_priv(dev); + struct tx_desc *txptr; + unsigned long flags; + + DMFE_DBUG(0, "dmfe_start_xmit", 0); + + /* Resource flag check */ + netif_stop_queue(dev); + + /* Too large packet check */ + if (skb->len > MAX_PACKET_SIZE) { + printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len); + dev_kfree_skb(skb); + return 0; + } + + spin_lock_irqsave(&db->lock, flags); + + /* No Tx resource check, it never happen nromally */ + if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) { + spin_unlock_irqrestore(&db->lock, flags); + printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_queue_cnt); + return 1; + } + + /* Disable NIC interrupt */ + outl(0, dev->base_addr + DCR7); + + /* transmit this packet */ + txptr = db->tx_insert_ptr; + memcpy(txptr->tx_buf_ptr, skb->data, skb->len); + txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len); + + /* Point to next transmit free descriptor */ + db->tx_insert_ptr = txptr->next_tx_desc; + + /* Transmit Packet Process */ + if ( (!db->tx_queue_cnt) && (db->tx_packet_cnt < TX_MAX_SEND_CNT) ) { + txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ + db->tx_packet_cnt++; /* Ready to send */ + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + dev->trans_start = jiffies; /* saved time stamp */ + } else { + db->tx_queue_cnt++; /* queue TX packet */ + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + } + + /* Tx resource check */ + if ( db->tx_queue_cnt < TX_FREE_DESC_CNT ) + netif_wake_queue(dev); + + /* Restore CR7 to enable interrupt */ + spin_unlock_irqrestore(&db->lock, flags); + outl(db->cr7_data, dev->base_addr + DCR7); + + /* free this SKB */ + dev_kfree_skb(skb); + + return 0; +} + + +/* + * Stop the interface. + * The interface is stopped when it is brought. + */ + +static int dmfe_stop(struct DEVICE *dev) +{ + struct dmfe_board_info *db = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + DMFE_DBUG(0, "dmfe_stop", 0); + + /* disable system */ + netif_stop_queue(dev); + + /* deleted timer */ + del_timer_sync(&db->timer); + + /* Reset & stop DM910X board */ + outl(DM910X_RESET, ioaddr + DCR0); + udelay(5); + phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); + + /* free interrupt */ + free_irq(dev->irq, dev); + + /* free allocated rx buffer */ + dmfe_free_rxbuffer(db); + +#if 0 + /* show statistic counter */ + printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n", + db->tx_fifo_underrun, db->tx_excessive_collision, + db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier, + db->tx_jabber_timeout, db->reset_count, db->reset_cr8, + db->reset_fatal, db->reset_TXtimeout); +#endif + + return 0; +} + + +/* + * DM9102 insterrupt handler + * receive the packet to upper layer, free the transmitted packet + */ + +static irqreturn_t dmfe_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct DEVICE *dev = dev_id; + struct dmfe_board_info *db = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + unsigned long flags; + + DMFE_DBUG(0, "dmfe_interrupt()", 0); + + if (!dev) { + DMFE_DBUG(1, "dmfe_interrupt() without DEVICE arg", 0); + return IRQ_NONE; + } + + spin_lock_irqsave(&db->lock, flags); + + /* Got DM910X status */ + db->cr5_data = inl(ioaddr + DCR5); + outl(db->cr5_data, ioaddr + DCR5); + if ( !(db->cr5_data & 0xc1) ) { + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; + } + + /* Disable all interrupt in CR7 to solve the interrupt edge problem */ + outl(0, ioaddr + DCR7); + + /* Check system status */ + if (db->cr5_data & 0x2000) { + /* system bus error happen */ + DMFE_DBUG(1, "System bus error happen. CR5=", db->cr5_data); + db->reset_fatal++; + db->wait_reset = 1; /* Need to RESET */ + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; + } + + /* Received the coming packet */ + if ( (db->cr5_data & 0x40) && db->rx_avail_cnt ) + dmfe_rx_packet(dev, db); + + /* reallocate rx descriptor buffer */ + if (db->rx_avail_cnt<RX_DESC_CNT) + allocate_rx_buffer(db); + + /* Free the transmitted descriptor */ + if ( db->cr5_data & 0x01) + dmfe_free_tx_pkt(dev, db); + + /* Mode Check */ + if (db->dm910x_chk_mode & 0x2) { + db->dm910x_chk_mode = 0x4; + db->cr6_data |= 0x100; + update_cr6(db->cr6_data, db->ioaddr); + } + + /* Restore CR7 to enable interrupt mask */ + outl(db->cr7_data, ioaddr + DCR7); + + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; +} + + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ + +static void poll_dmfe (struct net_device *dev) +{ + /* disable_irq here is not very nice, but with the lockless + interrupt handler we have no other choice. */ + disable_irq(dev->irq); + dmfe_interrupt (dev->irq, dev, NULL); + enable_irq(dev->irq); +} +#endif + +/* + * Free TX resource after TX complete + */ + +static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db) +{ + struct tx_desc *txptr; + unsigned long ioaddr = dev->base_addr; + u32 tdes0; + + txptr = db->tx_remove_ptr; + while(db->tx_packet_cnt) { + tdes0 = le32_to_cpu(txptr->tdes0); + /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ + if (tdes0 & 0x80000000) + break; + + /* A packet sent completed */ + db->tx_packet_cnt--; + db->stats.tx_packets++; + + /* Transmit statistic counter */ + if ( tdes0 != 0x7fffffff ) { + /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ + db->stats.collisions += (tdes0 >> 3) & 0xf; + db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; + if (tdes0 & TDES0_ERR_MASK) { + db->stats.tx_errors++; + + if (tdes0 & 0x0002) { /* UnderRun */ + db->tx_fifo_underrun++; + if ( !(db->cr6_data & CR6_SFT) ) { + db->cr6_data = db->cr6_data | CR6_SFT; + update_cr6(db->cr6_data, db->ioaddr); + } + } + if (tdes0 & 0x0100) + db->tx_excessive_collision++; + if (tdes0 & 0x0200) + db->tx_late_collision++; + if (tdes0 & 0x0400) + db->tx_no_carrier++; + if (tdes0 & 0x0800) + db->tx_loss_carrier++; + if (tdes0 & 0x4000) + db->tx_jabber_timeout++; + } + } + + txptr = txptr->next_tx_desc; + }/* End of while */ + + /* Update TX remove pointer to next */ + db->tx_remove_ptr = txptr; + + /* Send the Tx packet in queue */ + if ( (db->tx_packet_cnt < TX_MAX_SEND_CNT) && db->tx_queue_cnt ) { + txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ + db->tx_packet_cnt++; /* Ready to send */ + db->tx_queue_cnt--; + outl(0x1, ioaddr + DCR1); /* Issue Tx polling */ + dev->trans_start = jiffies; /* saved time stamp */ + } + + /* Resource available check */ + if ( db->tx_queue_cnt < TX_WAKE_DESC_CNT ) + netif_wake_queue(dev); /* Active upper layer, send again */ +} + + +/* + * Calculate the CRC valude of the Rx packet + * flag = 1 : return the reverse CRC (for the received packet CRC) + * 0 : return the normal CRC (for Hash Table index) + */ + +static inline u32 cal_CRC(unsigned char * Data, unsigned int Len, u8 flag) +{ + u32 crc = crc32(~0, Data, Len); + if (flag) crc = ~crc; + return crc; +} + + +/* + * Receive the come packet and pass to upper layer + */ + +static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db) +{ + struct rx_desc *rxptr; + struct sk_buff *skb; + int rxlen; + u32 rdes0; + + rxptr = db->rx_ready_ptr; + + while(db->rx_avail_cnt) { + rdes0 = le32_to_cpu(rxptr->rdes0); + if (rdes0 & 0x80000000) /* packet owner check */ + break; + + db->rx_avail_cnt--; + db->interval_rx_cnt++; + + pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE); + if ( (rdes0 & 0x300) != 0x300) { + /* A packet without First/Last flag */ + /* reuse this SKB */ + DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0); + dmfe_reuse_skb(db, rxptr->rx_skb_ptr); + } else { + /* A packet with First/Last flag */ + rxlen = ( (rdes0 >> 16) & 0x3fff) - 4; + + /* error summary bit check */ + if (rdes0 & 0x8000) { + /* This is a error packet */ + //printk(DRV_NAME ": rdes0: %lx\n", rdes0); + db->stats.rx_errors++; + if (rdes0 & 1) + db->stats.rx_fifo_errors++; + if (rdes0 & 2) + db->stats.rx_crc_errors++; + if (rdes0 & 0x80) + db->stats.rx_length_errors++; + } + + if ( !(rdes0 & 0x8000) || + ((db->cr6_data & CR6_PM) && (rxlen>6)) ) { + skb = rxptr->rx_skb_ptr; + + /* Received Packet CRC check need or not */ + if ( (db->dm910x_chk_mode & 1) && + (cal_CRC(skb->tail, rxlen, 1) != + (*(u32 *) (skb->tail+rxlen) ))) { /* FIXME (?) */ + /* Found a error received packet */ + dmfe_reuse_skb(db, rxptr->rx_skb_ptr); + db->dm910x_chk_mode = 3; + } else { + /* Good packet, send to upper layer */ + /* Shorst packet used new SKB */ + if ( (rxlen < RX_COPY_SIZE) && + ( (skb = dev_alloc_skb(rxlen + 2) ) + != NULL) ) { + /* size less than COPY_SIZE, allocate a rxlen SKB */ + skb->dev = dev; + skb_reserve(skb, 2); /* 16byte align */ + memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen); + dmfe_reuse_skb(db, rxptr->rx_skb_ptr); + } else { + skb->dev = dev; + skb_put(skb, rxlen); + } + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->last_rx = jiffies; + db->stats.rx_packets++; + db->stats.rx_bytes += rxlen; + } + } else { + /* Reuse SKB buffer when the packet is error */ + DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0); + dmfe_reuse_skb(db, rxptr->rx_skb_ptr); + } + } + + rxptr = rxptr->next_rx_desc; + } + + db->rx_ready_ptr = rxptr; +} + + +/* + * Get statistics from driver. + */ + +static struct net_device_stats * dmfe_get_stats(struct DEVICE *dev) +{ + struct dmfe_board_info *db = netdev_priv(dev); + + DMFE_DBUG(0, "dmfe_get_stats", 0); + return &db->stats; +} + + +/* + * Set DM910X multicast address + */ + +static void dmfe_set_filter_mode(struct DEVICE * dev) +{ + struct dmfe_board_info *db = netdev_priv(dev); + unsigned long flags; + + DMFE_DBUG(0, "dmfe_set_filter_mode()", 0); + spin_lock_irqsave(&db->lock, flags); + + if (dev->flags & IFF_PROMISC) { + DMFE_DBUG(0, "Enable PROM Mode", 0); + db->cr6_data |= CR6_PM | CR6_PBF; + update_cr6(db->cr6_data, db->ioaddr); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + if (dev->flags & IFF_ALLMULTI || dev->mc_count > DMFE_MAX_MULTICAST) { + DMFE_DBUG(0, "Pass all multicast address", dev->mc_count); + db->cr6_data &= ~(CR6_PM | CR6_PBF); + db->cr6_data |= CR6_PAM; + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + DMFE_DBUG(0, "Set multicast address", dev->mc_count); + if (db->chip_id == PCI_DM9132_ID) + dm9132_id_table(dev, dev->mc_count); /* DM9132 */ + else + send_filter_frame(dev, dev->mc_count); /* DM9102/DM9102A */ + spin_unlock_irqrestore(&db->lock, flags); +} + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct dmfe_board_info *np = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + if (np->pdev) + strcpy(info->bus_info, pci_name(np->pdev)); + else + sprintf(info->bus_info, "EISA 0x%lx %d", + dev->base_addr, dev->irq); +} + +static struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, +}; + +/* + * A periodic timer routine + * Dynamic media sense, allocate Rx buffer... + */ + +static void dmfe_timer(unsigned long data) +{ + u32 tmp_cr8; + unsigned char tmp_cr12; + struct DEVICE *dev = (struct DEVICE *) data; + struct dmfe_board_info *db = netdev_priv(dev); + unsigned long flags; + + DMFE_DBUG(0, "dmfe_timer()", 0); + spin_lock_irqsave(&db->lock, flags); + + /* Media mode process when Link OK before enter this route */ + if (db->first_in_callback == 0) { + db->first_in_callback = 1; + if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) { + db->cr6_data &= ~0x40000; + update_cr6(db->cr6_data, db->ioaddr); + phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id); + db->cr6_data |= 0x40000; + update_cr6(db->cr6_data, db->ioaddr); + db->timer.expires = DMFE_TIMER_WUT + HZ * 2; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + } + + + /* Operating Mode Check */ + if ( (db->dm910x_chk_mode & 0x1) && + (db->stats.rx_packets > MAX_CHECK_PACKET) ) + db->dm910x_chk_mode = 0x4; + + /* Dynamic reset DM910X : system error or transmit time-out */ + tmp_cr8 = inl(db->ioaddr + DCR8); + if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) { + db->reset_cr8++; + db->wait_reset = 1; + } + db->interval_rx_cnt = 0; + + /* TX polling kick monitor */ + if ( db->tx_packet_cnt && + time_after(jiffies, dev->trans_start + DMFE_TX_KICK) ) { + outl(0x1, dev->base_addr + DCR1); /* Tx polling again */ + + /* TX Timeout */ + if ( time_after(jiffies, dev->trans_start + DMFE_TX_TIMEOUT) ) { + db->reset_TXtimeout++; + db->wait_reset = 1; + printk(KERN_WARNING "%s: Tx timeout - resetting\n", + dev->name); + } + } + + if (db->wait_reset) { + DMFE_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt); + db->reset_count++; + dmfe_dynamic_reset(dev); + db->first_in_callback = 0; + db->timer.expires = DMFE_TIMER_WUT; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + /* Link status check, Dynamic media type change */ + if (db->chip_id == PCI_DM9132_ID) + tmp_cr12 = inb(db->ioaddr + DCR9 + 3); /* DM9132 */ + else + tmp_cr12 = inb(db->ioaddr + DCR12); /* DM9102/DM9102A */ + + if ( ((db->chip_id == PCI_DM9102_ID) && + (db->chip_revision == 0x02000030)) || + ((db->chip_id == PCI_DM9132_ID) && + (db->chip_revision == 0x02000010)) ) { + /* DM9102A Chip */ + if (tmp_cr12 & 2) + tmp_cr12 = 0x0; /* Link failed */ + else + tmp_cr12 = 0x3; /* Link OK */ + } + + if ( !(tmp_cr12 & 0x3) && !db->link_failed ) { + /* Link Failed */ + DMFE_DBUG(0, "Link Failed", tmp_cr12); + db->link_failed = 1; + + /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ + /* AUTO or force 1M Homerun/Longrun don't need */ + if ( !(db->media_mode & 0x38) ) + phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id); + + /* AUTO mode, if INT phyxcer link failed, select EXT device */ + if (db->media_mode & DMFE_AUTO) { + /* 10/100M link failed, used 1M Home-Net */ + db->cr6_data|=0x00040000; /* bit18=1, MII */ + db->cr6_data&=~0x00000200; /* bit9=0, HD mode */ + update_cr6(db->cr6_data, db->ioaddr); + } + } else + if ((tmp_cr12 & 0x3) && db->link_failed) { + DMFE_DBUG(0, "Link link OK", tmp_cr12); + db->link_failed = 0; + + /* Auto Sense Speed */ + if ( (db->media_mode & DMFE_AUTO) && + dmfe_sense_speed(db) ) + db->link_failed = 1; + dmfe_process_mode(db); + /* SHOW_MEDIA_TYPE(db->op_mode); */ + } + + /* HPNA remote command check */ + if (db->HPNA_command & 0xf00) { + db->HPNA_timer--; + if (!db->HPNA_timer) + dmfe_HPNA_remote_cmd_chk(db); + } + + /* Timer active again */ + db->timer.expires = DMFE_TIMER_WUT; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); +} + + +/* + * Dynamic reset the DM910X board + * Stop DM910X board + * Free Tx/Rx allocated memory + * Reset DM910X board + * Re-initilize DM910X board + */ + +static void dmfe_dynamic_reset(struct DEVICE *dev) +{ + struct dmfe_board_info *db = netdev_priv(dev); + + DMFE_DBUG(0, "dmfe_dynamic_reset()", 0); + + /* Sopt MAC controller */ + db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ + update_cr6(db->cr6_data, dev->base_addr); + outl(0, dev->base_addr + DCR7); /* Disable Interrupt */ + outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5); + + /* Disable upper layer interface */ + netif_stop_queue(dev); + + /* Free Rx Allocate buffer */ + dmfe_free_rxbuffer(db); + + /* system variable init */ + db->tx_packet_cnt = 0; + db->tx_queue_cnt = 0; + db->rx_avail_cnt = 0; + db->link_failed = 1; + db->wait_reset = 0; + + /* Re-initilize DM910X board */ + dmfe_init_dm910x(dev); + + /* Restart upper layer interface */ + netif_wake_queue(dev); +} + + +/* + * free all allocated rx buffer + */ + +static void dmfe_free_rxbuffer(struct dmfe_board_info * db) +{ + DMFE_DBUG(0, "dmfe_free_rxbuffer()", 0); + + /* free allocated rx buffer */ + while (db->rx_avail_cnt) { + dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr); + db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc; + db->rx_avail_cnt--; + } +} + + +/* + * Reuse the SK buffer + */ + +static void dmfe_reuse_skb(struct dmfe_board_info *db, struct sk_buff * skb) +{ + struct rx_desc *rxptr = db->rx_insert_ptr; + + if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) { + rxptr->rx_skb_ptr = skb; + rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); + wmb(); + rxptr->rdes0 = cpu_to_le32(0x80000000); + db->rx_avail_cnt++; + db->rx_insert_ptr = rxptr->next_rx_desc; + } else + DMFE_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt); +} + + +/* + * Initialize transmit/Receive descriptor + * Using Chain structure, and allocate Tx/Rx buffer + */ + +static void dmfe_descriptor_init(struct dmfe_board_info *db, unsigned long ioaddr) +{ + struct tx_desc *tmp_tx; + struct rx_desc *tmp_rx; + unsigned char *tmp_buf; + dma_addr_t tmp_tx_dma, tmp_rx_dma; + dma_addr_t tmp_buf_dma; + int i; + + DMFE_DBUG(0, "dmfe_descriptor_init()", 0); + + /* tx descriptor start pointer */ + db->tx_insert_ptr = db->first_tx_desc; + db->tx_remove_ptr = db->first_tx_desc; + outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */ + + /* rx descriptor start pointer */ + db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT; + db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT; + db->rx_insert_ptr = db->first_rx_desc; + db->rx_ready_ptr = db->first_rx_desc; + outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */ + + /* Init Transmit chain */ + tmp_buf = db->buf_pool_start; + tmp_buf_dma = db->buf_pool_dma_start; + tmp_tx_dma = db->first_tx_desc_dma; + for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) { + tmp_tx->tx_buf_ptr = tmp_buf; + tmp_tx->tdes0 = cpu_to_le32(0); + tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ + tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); + tmp_tx_dma += sizeof(struct tx_desc); + tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); + tmp_tx->next_tx_desc = tmp_tx + 1; + tmp_buf = tmp_buf + TX_BUF_ALLOC; + tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; + } + (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); + tmp_tx->next_tx_desc = db->first_tx_desc; + + /* Init Receive descriptor chain */ + tmp_rx_dma=db->first_rx_desc_dma; + for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) { + tmp_rx->rdes0 = cpu_to_le32(0); + tmp_rx->rdes1 = cpu_to_le32(0x01000600); + tmp_rx_dma += sizeof(struct rx_desc); + tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); + tmp_rx->next_rx_desc = tmp_rx + 1; + } + (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); + tmp_rx->next_rx_desc = db->first_rx_desc; + + /* pre-allocate Rx buffer */ + allocate_rx_buffer(db); +} + + +/* + * Update CR6 value + * Firstly stop DM910X , then written value and start + */ + +static void update_cr6(u32 cr6_data, unsigned long ioaddr) +{ + u32 cr6_tmp; + + cr6_tmp = cr6_data & ~0x2002; /* stop Tx/Rx */ + outl(cr6_tmp, ioaddr + DCR6); + udelay(5); + outl(cr6_data, ioaddr + DCR6); + udelay(5); +} + + +/* + * Send a setup frame for DM9132 + * This setup frame initilize DM910X address filter mode +*/ + +static void dm9132_id_table(struct DEVICE *dev, int mc_cnt) +{ + struct dev_mc_list *mcptr; + u16 * addrptr; + unsigned long ioaddr = dev->base_addr+0xc0; /* ID Table */ + u32 hash_val; + u16 i, hash_table[4]; + + DMFE_DBUG(0, "dm9132_id_table()", 0); + + /* Node address */ + addrptr = (u16 *) dev->dev_addr; + outw(addrptr[0], ioaddr); + ioaddr += 4; + outw(addrptr[1], ioaddr); + ioaddr += 4; + outw(addrptr[2], ioaddr); + ioaddr += 4; + + /* Clear Hash Table */ + for (i = 0; i < 4; i++) + hash_table[i] = 0x0; + + /* broadcast address */ + hash_table[3] = 0x8000; + + /* the multicast address in Hash Table : 64 bits */ + for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) { + hash_val = cal_CRC( (char *) mcptr->dmi_addr, 6, 0) & 0x3f; + hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16); + } + + /* Write the hash table to MAC MD table */ + for (i = 0; i < 4; i++, ioaddr += 4) + outw(hash_table[i], ioaddr); +} + + +/* + * Send a setup frame for DM9102/DM9102A + * This setup frame initilize DM910X address filter mode + */ + +static void send_filter_frame(struct DEVICE *dev, int mc_cnt) +{ + struct dmfe_board_info *db = netdev_priv(dev); + struct dev_mc_list *mcptr; + struct tx_desc *txptr; + u16 * addrptr; + u32 * suptr; + int i; + + DMFE_DBUG(0, "send_filter_frame()", 0); + + txptr = db->tx_insert_ptr; + suptr = (u32 *) txptr->tx_buf_ptr; + + /* Node address */ + addrptr = (u16 *) dev->dev_addr; + *suptr++ = addrptr[0]; + *suptr++ = addrptr[1]; + *suptr++ = addrptr[2]; + + /* broadcast address */ + *suptr++ = 0xffff; + *suptr++ = 0xffff; + *suptr++ = 0xffff; + + /* fit the multicast address */ + for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) { + addrptr = (u16 *) mcptr->dmi_addr; + *suptr++ = addrptr[0]; + *suptr++ = addrptr[1]; + *suptr++ = addrptr[2]; + } + + for (; i<14; i++) { + *suptr++ = 0xffff; + *suptr++ = 0xffff; + *suptr++ = 0xffff; + } + + /* prepare the setup frame */ + db->tx_insert_ptr = txptr->next_tx_desc; + txptr->tdes1 = cpu_to_le32(0x890000c0); + + /* Resource Check and Send the setup packet */ + if (!db->tx_packet_cnt) { + /* Resource Empty */ + db->tx_packet_cnt++; + txptr->tdes0 = cpu_to_le32(0x80000000); + update_cr6(db->cr6_data | 0x2000, dev->base_addr); + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + update_cr6(db->cr6_data, dev->base_addr); + dev->trans_start = jiffies; + } else + db->tx_queue_cnt++; /* Put in TX queue */ +} + + +/* + * Allocate rx buffer, + * As possible as allocate maxiumn Rx buffer + */ + +static void allocate_rx_buffer(struct dmfe_board_info *db) +{ + struct rx_desc *rxptr; + struct sk_buff *skb; + + rxptr = db->rx_insert_ptr; + + while(db->rx_avail_cnt < RX_DESC_CNT) { + if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL ) + break; + rxptr->rx_skb_ptr = skb; /* FIXME (?) */ + rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); + wmb(); + rxptr->rdes0 = cpu_to_le32(0x80000000); + rxptr = rxptr->next_rx_desc; + db->rx_avail_cnt++; + } + + db->rx_insert_ptr = rxptr; +} + + +/* + * Read one word data from the serial ROM + */ + +static u16 read_srom_word(long ioaddr, int offset) +{ + int i; + u16 srom_data = 0; + long cr9_ioaddr = ioaddr + DCR9; + + outl(CR9_SROM_READ, cr9_ioaddr); + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + + /* Send the Read Command 110b */ + SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); + SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); + SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr); + + /* Send the offset */ + for (i = 5; i >= 0; i--) { + srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; + SROM_CLK_WRITE(srom_data, cr9_ioaddr); + } + + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + + for (i = 16; i > 0; i--) { + outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr); + udelay(5); + srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0); + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + udelay(5); + } + + outl(CR9_SROM_READ, cr9_ioaddr); + return srom_data; +} + + +/* + * Auto sense the media mode + */ + +static u8 dmfe_sense_speed(struct dmfe_board_info * db) +{ + u8 ErrFlag = 0; + u16 phy_mode; + + /* CR6 bit18=0, select 10/100M */ + update_cr6( (db->cr6_data & ~0x40000), db->ioaddr); + + phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + + if ( (phy_mode & 0x24) == 0x24 ) { + if (db->chip_id == PCI_DM9132_ID) /* DM9132 */ + phy_mode = phy_read(db->ioaddr, db->phy_addr, 7, db->chip_id) & 0xf000; + else /* DM9102/DM9102A */ + phy_mode = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0xf000; + /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */ + switch (phy_mode) { + case 0x1000: db->op_mode = DMFE_10MHF; break; + case 0x2000: db->op_mode = DMFE_10MFD; break; + case 0x4000: db->op_mode = DMFE_100MHF; break; + case 0x8000: db->op_mode = DMFE_100MFD; break; + default: db->op_mode = DMFE_10MHF; + ErrFlag = 1; + break; + } + } else { + db->op_mode = DMFE_10MHF; + DMFE_DBUG(0, "Link Failed :", phy_mode); + ErrFlag = 1; + } + + return ErrFlag; +} + + +/* + * Set 10/100 phyxcer capability + * AUTO mode : phyxcer register4 is NIC capability + * Force mode: phyxcer register4 is the force media + */ + +static void dmfe_set_phyxcer(struct dmfe_board_info *db) +{ + u16 phy_reg; + + /* Select 10/100M phyxcer */ + db->cr6_data &= ~0x40000; + update_cr6(db->cr6_data, db->ioaddr); + + /* DM9009 Chip: Phyxcer reg18 bit12=0 */ + if (db->chip_id == PCI_DM9009_ID) { + phy_reg = phy_read(db->ioaddr, db->phy_addr, 18, db->chip_id) & ~0x1000; + phy_write(db->ioaddr, db->phy_addr, 18, phy_reg, db->chip_id); + } + + /* Phyxcer capability setting */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; + + if (db->media_mode & DMFE_AUTO) { + /* AUTO Mode */ + phy_reg |= db->PHY_reg4; + } else { + /* Force Mode */ + switch(db->media_mode) { + case DMFE_10MHF: phy_reg |= 0x20; break; + case DMFE_10MFD: phy_reg |= 0x40; break; + case DMFE_100MHF: phy_reg |= 0x80; break; + case DMFE_100MFD: phy_reg |= 0x100; break; + } + if (db->chip_id == PCI_DM9009_ID) phy_reg &= 0x61; + } + + /* Write new capability to Phyxcer Reg4 */ + if ( !(phy_reg & 0x01e0)) { + phy_reg|=db->PHY_reg4; + db->media_mode|=DMFE_AUTO; + } + phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); + + /* Restart Auto-Negotiation */ + if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) ) + phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id); + if ( !db->chip_type ) + phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); +} + + +/* + * Process op-mode + * AUTO mode : PHY controller in Auto-negotiation Mode + * Force mode: PHY controller in force mode with HUB + * N-way force capability with SWITCH + */ + +static void dmfe_process_mode(struct dmfe_board_info *db) +{ + u16 phy_reg; + + /* Full Duplex Mode Check */ + if (db->op_mode & 0x4) + db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */ + else + db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */ + + /* Transciver Selection */ + if (db->op_mode & 0x10) /* 1M HomePNA */ + db->cr6_data |= 0x40000;/* External MII select */ + else + db->cr6_data &= ~0x40000;/* Internal 10/100 transciver */ + + update_cr6(db->cr6_data, db->ioaddr); + + /* 10/100M phyxcer force mode need */ + if ( !(db->media_mode & 0x18)) { + /* Forece Mode */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id); + if ( !(phy_reg & 0x1) ) { + /* parter without N-Way capability */ + phy_reg = 0x0; + switch(db->op_mode) { + case DMFE_10MHF: phy_reg = 0x0; break; + case DMFE_10MFD: phy_reg = 0x100; break; + case DMFE_100MHF: phy_reg = 0x2000; break; + case DMFE_100MFD: phy_reg = 0x2100; break; + } + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id); + if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) ) + mdelay(20); + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id); + } + } +} + + +/* + * Write a word to Phy register + */ + +static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id) +{ + u16 i; + unsigned long ioaddr; + + if (chip_id == PCI_DM9132_ID) { + ioaddr = iobase + 0x80 + offset * 4; + outw(phy_data, ioaddr); + } else { + /* DM9102/DM9102A Chip */ + ioaddr = iobase + DCR9; + + /* Send 33 synchronization clock to Phy controller */ + for (i = 0; i < 35; i++) + phy_write_1bit(ioaddr, PHY_DATA_1); + + /* Send start command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0); + phy_write_1bit(ioaddr, PHY_DATA_1); + + /* Send write command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0); + phy_write_1bit(ioaddr, PHY_DATA_1); + + /* Send Phy address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); + + /* Send register address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0); + + /* written trasnition */ + phy_write_1bit(ioaddr, PHY_DATA_1); + phy_write_1bit(ioaddr, PHY_DATA_0); + + /* Write a word data to PHY controller */ + for ( i = 0x8000; i > 0; i >>= 1) + phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0); + } +} + + +/* + * Read a word data from phy register + */ + +static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id) +{ + int i; + u16 phy_data; + unsigned long ioaddr; + + if (chip_id == PCI_DM9132_ID) { + /* DM9132 Chip */ + ioaddr = iobase + 0x80 + offset * 4; + phy_data = inw(ioaddr); + } else { + /* DM9102/DM9102A Chip */ + ioaddr = iobase + DCR9; + + /* Send 33 synchronization clock to Phy controller */ + for (i = 0; i < 35; i++) + phy_write_1bit(ioaddr, PHY_DATA_1); + + /* Send start command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0); + phy_write_1bit(ioaddr, PHY_DATA_1); + + /* Send read command(10) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_1); + phy_write_1bit(ioaddr, PHY_DATA_0); + + /* Send Phy address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); + + /* Send register address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0); + + /* Skip transition state */ + phy_read_1bit(ioaddr); + + /* read 16bit data */ + for (phy_data = 0, i = 0; i < 16; i++) { + phy_data <<= 1; + phy_data |= phy_read_1bit(ioaddr); + } + } + + return phy_data; +} + + +/* + * Write one bit data to Phy Controller + */ + +static void phy_write_1bit(unsigned long ioaddr, u32 phy_data) +{ + outl(phy_data, ioaddr); /* MII Clock Low */ + udelay(1); + outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */ + udelay(1); + outl(phy_data, ioaddr); /* MII Clock Low */ + udelay(1); +} + + +/* + * Read one bit phy data from PHY controller + */ + +static u16 phy_read_1bit(unsigned long ioaddr) +{ + u16 phy_data; + + outl(0x50000, ioaddr); + udelay(1); + phy_data = ( inl(ioaddr) >> 19 ) & 0x1; + outl(0x40000, ioaddr); + udelay(1); + + return phy_data; +} + + +/* + * Parser SROM and media mode + */ + +static void dmfe_parse_srom(struct dmfe_board_info * db) +{ + char * srom = db->srom; + int dmfe_mode, tmp_reg; + + DMFE_DBUG(0, "dmfe_parse_srom() ", 0); + + /* Init CR15 */ + db->cr15_data = CR15_DEFAULT; + + /* Check SROM Version */ + if ( ( (int) srom[18] & 0xff) == SROM_V41_CODE) { + /* SROM V4.01 */ + /* Get NIC support media mode */ + db->NIC_capability = le16_to_cpup(srom + 34); + db->PHY_reg4 = 0; + for (tmp_reg = 1; tmp_reg < 0x10; tmp_reg <<= 1) { + switch( db->NIC_capability & tmp_reg ) { + case 0x1: db->PHY_reg4 |= 0x0020; break; + case 0x2: db->PHY_reg4 |= 0x0040; break; + case 0x4: db->PHY_reg4 |= 0x0080; break; + case 0x8: db->PHY_reg4 |= 0x0100; break; + } + } + + /* Media Mode Force or not check */ + dmfe_mode = le32_to_cpup(srom + 34) & le32_to_cpup(srom + 36); + switch(dmfe_mode) { + case 0x4: dmfe_media_mode = DMFE_100MHF; break; /* 100MHF */ + case 0x2: dmfe_media_mode = DMFE_10MFD; break; /* 10MFD */ + case 0x8: dmfe_media_mode = DMFE_100MFD; break; /* 100MFD */ + case 0x100: + case 0x200: dmfe_media_mode = DMFE_1M_HPNA; break;/* HomePNA */ + } + + /* Special Function setting */ + /* VLAN function */ + if ( (SF_mode & 0x1) || (srom[43] & 0x80) ) + db->cr15_data |= 0x40; + + /* Flow Control */ + if ( (SF_mode & 0x2) || (srom[40] & 0x1) ) + db->cr15_data |= 0x400; + + /* TX pause packet */ + if ( (SF_mode & 0x4) || (srom[40] & 0xe) ) + db->cr15_data |= 0x9800; + } + + /* Parse HPNA parameter */ + db->HPNA_command = 1; + + /* Accept remote command or not */ + if (HPNA_rx_cmd == 0) + db->HPNA_command |= 0x8000; + + /* Issue remote command & operation mode */ + if (HPNA_tx_cmd == 1) + switch(HPNA_mode) { /* Issue Remote Command */ + case 0: db->HPNA_command |= 0x0904; break; + case 1: db->HPNA_command |= 0x0a00; break; + case 2: db->HPNA_command |= 0x0506; break; + case 3: db->HPNA_command |= 0x0602; break; + } + else + switch(HPNA_mode) { /* Don't Issue */ + case 0: db->HPNA_command |= 0x0004; break; + case 1: db->HPNA_command |= 0x0000; break; + case 2: db->HPNA_command |= 0x0006; break; + case 3: db->HPNA_command |= 0x0002; break; + } + + /* Check DM9801 or DM9802 present or not */ + db->HPNA_present = 0; + update_cr6(db->cr6_data|0x40000, db->ioaddr); + tmp_reg = phy_read(db->ioaddr, db->phy_addr, 3, db->chip_id); + if ( ( tmp_reg & 0xfff0 ) == 0xb900 ) { + /* DM9801 or DM9802 present */ + db->HPNA_timer = 8; + if ( phy_read(db->ioaddr, db->phy_addr, 31, db->chip_id) == 0x4404) { + /* DM9801 HomeRun */ + db->HPNA_present = 1; + dmfe_program_DM9801(db, tmp_reg); + } else { + /* DM9802 LongRun */ + db->HPNA_present = 2; + dmfe_program_DM9802(db); + } + } + +} + + +/* + * Init HomeRun DM9801 + */ + +static void dmfe_program_DM9801(struct dmfe_board_info * db, int HPNA_rev) +{ + uint reg17, reg25; + + if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9801_NOISE_FLOOR; + switch(HPNA_rev) { + case 0xb900: /* DM9801 E3 */ + db->HPNA_command |= 0x1000; + reg25 = phy_read(db->ioaddr, db->phy_addr, 24, db->chip_id); + reg25 = ( (reg25 + HPNA_NoiseFloor) & 0xff) | 0xf000; + reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); + break; + case 0xb901: /* DM9801 E4 */ + reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); + reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor; + reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); + reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor + 3; + break; + case 0xb902: /* DM9801 E5 */ + case 0xb903: /* DM9801 E6 */ + default: + db->HPNA_command |= 0x1000; + reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); + reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor - 5; + reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); + reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor; + break; + } + phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); + phy_write(db->ioaddr, db->phy_addr, 17, reg17, db->chip_id); + phy_write(db->ioaddr, db->phy_addr, 25, reg25, db->chip_id); +} + + +/* + * Init HomeRun DM9802 + */ + +static void dmfe_program_DM9802(struct dmfe_board_info * db) +{ + uint phy_reg; + + if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9802_NOISE_FLOOR; + phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); + phy_reg = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); + phy_reg = ( phy_reg & 0xff00) + HPNA_NoiseFloor; + phy_write(db->ioaddr, db->phy_addr, 25, phy_reg, db->chip_id); +} + + +/* + * Check remote HPNA power and speed status. If not correct, + * issue command again. +*/ + +static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db) +{ + uint phy_reg; + + /* Got remote device status */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0x60; + switch(phy_reg) { + case 0x00: phy_reg = 0x0a00;break; /* LP/LS */ + case 0x20: phy_reg = 0x0900;break; /* LP/HS */ + case 0x40: phy_reg = 0x0600;break; /* HP/LS */ + case 0x60: phy_reg = 0x0500;break; /* HP/HS */ + } + + /* Check remote device status match our setting ot not */ + if ( phy_reg != (db->HPNA_command & 0x0f00) ) { + phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); + db->HPNA_timer=8; + } else + db->HPNA_timer=600; /* Match, every 10 minutes, check */ +} + + + +static struct pci_device_id dmfe_pci_tbl[] = { + { 0x1282, 0x9132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9132_ID }, + { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9102_ID }, + { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9100_ID }, + { 0x1282, 0x9009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9009_ID }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, dmfe_pci_tbl); + + +static struct pci_driver dmfe_driver = { + .name = "dmfe", + .id_table = dmfe_pci_tbl, + .probe = dmfe_init_one, + .remove = __devexit_p(dmfe_remove_one), +}; + +MODULE_AUTHOR("Sten Wang, sten_wang@davicom.com.tw"); +MODULE_DESCRIPTION("Davicom DM910X fast ethernet driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_param(debug, int, 0); +module_param(mode, byte, 0); +module_param(cr6set, int, 0); +module_param(chkmode, byte, 0); +module_param(HPNA_mode, byte, 0); +module_param(HPNA_rx_cmd, byte, 0); +module_param(HPNA_tx_cmd, byte, 0); +module_param(HPNA_NoiseFloor, byte, 0); +module_param(SF_mode, byte, 0); +MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)"); +MODULE_PARM_DESC(mode, "Davicom DM9xxx: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA"); +MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function (bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)"); + +/* Description: + * when user used insmod to add module, system invoked init_module() + * to initilize and register. + */ + +static int __init dmfe_init_module(void) +{ + int rc; + + printk(version); + printed_version = 1; + + DMFE_DBUG(0, "init_module() ", debug); + + if (debug) + dmfe_debug = debug; /* set debug flag */ + if (cr6set) + dmfe_cr6_user_set = cr6set; + + switch(mode) { + case DMFE_10MHF: + case DMFE_100MHF: + case DMFE_10MFD: + case DMFE_100MFD: + case DMFE_1M_HPNA: + dmfe_media_mode = mode; + break; + default:dmfe_media_mode = DMFE_AUTO; + break; + } + + if (HPNA_mode > 4) + HPNA_mode = 0; /* Default: LP/HS */ + if (HPNA_rx_cmd > 1) + HPNA_rx_cmd = 0; /* Default: Ignored remote cmd */ + if (HPNA_tx_cmd > 1) + HPNA_tx_cmd = 0; /* Default: Don't issue remote cmd */ + if (HPNA_NoiseFloor > 15) + HPNA_NoiseFloor = 0; + + rc = pci_module_init(&dmfe_driver); + if (rc < 0) + return rc; + + return 0; +} + + +/* + * Description: + * when user used rmmod to delete module, system invoked clean_module() + * to un-register all registered services. + */ + +static void __exit dmfe_cleanup_module(void) +{ + DMFE_DBUG(0, "dmfe_clean_module() ", debug); + pci_unregister_driver(&dmfe_driver); +} + +module_init(dmfe_init_module); +module_exit(dmfe_cleanup_module); |